Dehumidifiers
Transcription
Dehumidifiers
Dehumidifiers Take control of humidity and condensation with the Calorex industry leading range of dehumidifiers fullll range off dehumidifiers dehumidifi d h idifiers for f industrial i d t i l and d commercial commercial i l applications li ti h t recovery and heat d space heating h ti options ti save up to 75% % on running i costs and d carbon b emi emis issions sions i Leaders in our field: Cold stores Utility buildings Bottling & food plants Archives, museums & libraries Computer rooms Switching & power stations Electronics production Sports halls Wet clothes drying rooms Ice rinks Pharmaceutical production Manufacturing areas Process drying Boiler rooms Ship building & offshore Underground rooms THE CHALLENGE Atmospheric air contains moisture which is a problem to materials and manufacturing processes Protect your environment A false economy Even when you cannot see it, moisture in the Traditionally the problem was disguised by form of water vapour is all around us, held in the use of heat or ventilation. This process is suspension in the air. The relative humidity of exceptionally energy inefficient and reliant the air in many cases determines the extent on introducing outside air that is generally of corrosion of certain materials, the speed not suitable unless expensively heated. at which moulds develop and the rate of Drying by traditional heating involves increase of bacteria that cause decay. continuously warming a stream of outside Most materials and goods are best stored air on a constant ‘in and out’ cycle. under cool dry conditions. Heating and ventilation is extremely energy inefficient and expensive, luckily a solution does exist to make the air drier without heating – Calorex dehumidification Relative Humidity to define how much water vapour can be held in the air at a given temperature as a percentage of what it could contain at Corrosion saturation (100% RH). That is when the relative humidity reaches the level at Product deterioration which air can hold no more moisture. The maximum amount can vary according to Condensation its temperature - warmer air is capable of holding more moisture than colder air. Damp Mould and mildew Corrosion Speed of Steel Relative humidity (RH) is the expression used Rust increase in 55 days, grammes per square metre The challenges of excess moisture: 12 9 6 3 0 20 40 60 80 Relative humidity in % Prolonged drying Manufacturing delays Discomfort With an RH of over 60% the rate of corrosion on steel rises rapidly. At an RH of approximately 50%, virtually no corrosion occurs. 100 Drying flooded areas or new buildings Storage of: - vehicles - timber - furniture Preservation of buildings, plant, ships, drilling platforms & turbines - metals - chemical/technical materials - electronic & electrical components - ceramics & textiles - paper & cardboard boxes - beers, wines & spirits Applying industrial coatings Maintaining bridges & locks - hygroscopic substances - sugar, salt, coffee, cocoa, herbs, tea etc. - flowers & plants - livestock & zoo animals - military plant & equipment THE SOLUTION! The Calorex answer to this problem is its wide range of dehumidifiers suitable for every environment from warehouses and sub-stations to museums and garages A better way Dehumidification is much more sophisticated every need. From high tech problems than heating. It recirculates the same air and requiring sophisticated ‘total loss’ or ‘keep physically removes moisture from it. This dry recirculation’ systems to a simple off alleviates the need to continuously reheat the shelf mobile dehumidifier to plug in incoming air. Not only that, a dehumidifier and go - Calorex are unique problem will cleverly convert energy taken out of the solvers in their field. room as moisture (latent energy), to create ‘sensible energy’ that can be used to heat the room, accelerating the drying process. Problem solved Our wide range of units and operating temperatures ensure there is a system to fit How a Calorex Dehumidifier Works Expansion 28˚C 20˚C Humid Air Evaporator Condenser Compressor Dry, Warm Air Key benefits of a Calorex dehumidifier: ✓ Energy efficient ✓ Low temperature operation ✓ Heat recovery to air ✓ Automatic operation ✓ Quality construction ✓ Optional features ✓ Simple installation ✓ Minimal maintenance ✓ Long service life ✓ Comprehensive service network ✓ Environmentally friendly R407C refrigerant 80% Condensate to waste 40% Principles of operation – air to air dehumidifier The process of dehumidification involves moisture-laden air being drawn into a dehumidifier where the air passes across a refrigerated coil. The air is rapidly cooled below its dew point, condensing the water vapour and recovering its latent heat energy for re-use. The cooled air is then passed across the condenser where it is reheated and returned to the served area at the required lower relative humidity. Calorex is the world’s leading designer and manufacturer of industrial and commercial dehumidifiers WALLMOUNTED www.calorex.com A wall mounted compact dehumidifier designed to fit above a standard doorway OTW 15 ✓ Especially for use in: ✓ Self contained with fully ✓ Integral humidistat ✓ Tamper proof controls - Changing rooms - Store rooms and stairwells - Cellars and basements SPECIFICATIONS ✓ Epoxy polyester painted zintec automatic operation - Public buildings units steel cabinet ✓ Hot gas defrost for low temperature operation ✓ Air filter Performance Data OTW15AX OTW 15 Technical data Operating temperature range Dehumidification @ 30°C/60%RH Heat recovered to air @ 30°C/60%RH Airflow External static pressure Sound pressure level @ 3m °C 0 - 35 kg/24h 15 kW 0.9 m³/h 225 Pa 0 dB(A) Refrigerant 53 R407C Electrical data Supply Nominal power consumption V/ph/Hz 230/1N/50 kW 0.43 FLA amps 3.8 Maximum supply fuse amps 10 LRA (compressor start) amps 18 Width mm 825 Depth mm 363 Height mm 320 Weight kg 33 mm ID 10 The OTW15 is tamper proof – ideal for use in public buildings ELECTRICAL INPUT kW* 1.0 0.60 0.9 0.55 0.8 0.50 20˚C 0.7 0.45 15˚C 0.6 0.40 80% 30˚C 25˚C 10˚C 0 5 10 15 Litres/24 hours Free advice from staff qualified by years of experience and strong technical knowledge Dimensions Condensate drain size SENSIBLE HEAT OUTPUT kW* TO AIR 40% 50% 60% 70% 35˚C (flexible plastic hose) Options • Through the wall version CALOREX OTW 15 20 25 30 0.5 0.35 *AT 60% RH WALLMOUNTED Wall mounted compact dehumidifiers with air heating options DH 30 / 60 ✓ Ideal for dehumidification in: ✓ Self contained with fully automatic - Warehousing and storage - Electrical sub-stations - Sports clubs and changing rooms SPECIFICATIONS ✓ Plastisol coated galvanised steel operation - Clothes drying rooms units cabinet ✓ Integral humidistat ✓ Polyester coated evaporator ✓ Hot gas defrost for low temperature operation (X models) ✓ Quiet centrifugal fans and condenser DH30A/AX DH30AP/AXP DH60A/AX DH60AP/AXP Performance Data DH 30 Technical data Operating temperature range Dehumidification @ 30°C/60%RH Heat recovered to air @ 30°C/60%RH Airflow External static pressure Sound pressure level @ 3m °C 15-35/0-35 15-35/0-35 15-35/0-35 15-35/0-35 SENSIBLE HEAT OUTPUT kW* TO AIR 30% 40% 50% 60% 70% 80% 35˚C 30˚C ELECTRICAL INPUT kW* 2.15 0.8 1.9 0.75 kg/24h 30 30 60 60 25˚C 1.7 0.7 kW 1.9 1.9 3.5 3.5 20˚C 1.5 0.65 m³/h 700 700 1280 1280 15˚C 1.35 0.6 Pa 0 0 0 0 10˚C dB(A) Refrigerant 52 52 54 54 R407C R407C R407C R407C 0 10 20 30 40 50 60 1.2 Litres/24 hours 0.55 *AT 60% RH DH 60 Electrical data Supply Nominal power consumption V/ph/Hz kW 230/1N/50 230/1N/50 230/1N/50 230/1N/50 0.75 0.75 1.2 30˚C 1.1 1.0 2.3 0.9 12.7 7.5 24.2 Maximum supply fuse amps 10 20 13 32 15˚C LRA (compressor start) amps 15.8 15.8 30.0 30.0 10˚C 0 20 40 60 Litres/24 hours kW Flow rate optional standard optional standard LPHW electric LPHW electric 3.0 2.0 5.0 4.0 5.0 L/min - 5.0 L/min - 782 782 1247 1247 Dimensions Width mm Depth mm 256 256 256 256 Height mm 648 648 648 648 Weight kg 40 40 60 60 mm ID 10 10 10 10 Condensate drain size (flexible plastic hose) CALOREX DH 30 / 60 Options • Through the wall version • Electric air heater • LPHW air heater • Inlet filter kit • Remote humidistat 1.2 3.1 4.4 Heat output 3.5 2.6 amps Type 1.3 25˚C FLA - ELECTRICAL INPUT kW* 4.1 1.2 20˚C Heater SENSIBLE HEAT OUTPUT kW* TO AIR 30% 40% 50% 60% 70% 80% 35˚C 80 100 120 1.9 0.8 *AT 60% RH HIGH CAPACITY www.calorex.com Floor standing high performance dehumidifiers with air heating options DH 75 / 110 ✓ For a wide range of applications: ✓ Integral humidistat ✓ Polyester coated evaporator and - Museums and art galleries - Offices and archives - Sports halls and gyms SPECIFICATIONS ✓ Self contained with fully automatic operation - Warehousing and storage ✓ Stove enamelled aluminium cabinet ✓ Hot gas defrost for low temperature operation ✓ Quiet centrifugal fans condenser units DH75AX DH110AX DH110BX Performance Data DH 75 Technical data Operating temperature range Dehumidification @ 30°C/60%RH Heat recovered to air @ 30°C/60%RH Airflow External static pressure Sound pressure level @ 3m 40% 35˚C 50% 60% 70% 80% SENSIBLE HEAT OUTPUT kW* TO AIR ELECTRICAL INPUT kW* 4.8 1.6 °C 5 - 35 5 - 35 5 - 35 30˚C 4.0 1.5 kg/24h 86 108 108 25˚C 3.3 1.4 kW 4.0 5.2 5.2 20˚C 2.8 1.3 m³/h 1180 1180 1180 15˚C 2.3 1.2 Pa 0 0 0 10˚C dB(A) Refrigerant 53 53 53 R407C R407C R407C 0 20 40 60 80 100 120 140 160 1.7 Litres/24 hours 1.1 *AT 60% RH DH 110 Electrical data 35˚C Supply 30˚C Nominal power consumption V/ph/Hz kW 230/1N/50 230/1N/50 400/3N/50 1.5 2.1 40% 50% 60% 70% 80% 4.2 1.8 1.6 2.7 1.4 9.5 12 5.5 Maximum supply fuse amps 13 20 10 15˚C LRA (compressor start) amps 55 66 30 10˚C 0 20 40 60 80 100 Litres/24 hours Flow rate optional optional optional LPHW LPHW LPHW kW 8.9 8.9 8.9 L/min 9.6 9.6 9.6 mm 1520 1520 1520 Dimensions Width Depth mm 385 385 385 Height mm 796 796 796 Weight kg 143 144 144 mm 15 15 15 Condensate drain size (brass compression) CALOREX DH 75 / 110 Options • Through the wall version • LPHW air heater • Remote humidistat 2.1 3.4 amps Heat output @ 80°C flow 2.5 5.2 25˚C FLA Type ELECTRICAL INPUT kW* 5.9 2.0 20˚C Heater SENSIBLE HEAT OUTPUT kW* TO AIR 120 140 160 180 2.1 1.3 *AT 60% RH HIGH CAPACITY Floor standing high performance dehumidifiers for commercial premises and industrial environments DH 150 / 300 / 600 ✓ Humidity and dew point control for: ✓ Self contained with fully automatic - Warehousing and equipment storage - Metal and spare parts storage - Electrical sub-stations - Museums and furniture storage SPECIFICATIONS units operation ✓ Integral humidistat ✓ Polyester coated evaporator and ✓ Plastisol coated galvanised steel cabinet ✓ Hot gas defrost for low temperature operation (X models) ✓ Reverse cycle defrost for very low condenser DH150AX temperature operation (Y models) DH150BX DH300BY DH600BY Performance Data DH 150 Technical data Operating temperature range Dehumidification @ 30°C/60%RH Heat recovered to air @ 30°C/60%RH Airflow External static pressure Sound pressure level @ 3m 30% 40% 50% 35˚C 60% 70% SENSIBLE HEAT OUTPUT kW* TO AIR 80% ELECTRICAL INPUT kW* 10.8 3.2 °C 0 - 35 0 - 35 -15 - 35 -15 - 35 30˚C 9.4 3.0 kg/24h 150 150 300 600 25˚C 8.2 2.8 kW 7.4 7.4 14.7 29.7 20˚C 7.0 2.7 m³/h 2200 2200 5000 9000 15˚C 6.2 2.6 Pa 30 30 60 80 10˚C dB(A) Refrigerant 58 58 66 63 R407C R407C R407C R407C 0 50 100 150 200 250 300 5.4 Litres/24 hours 2.5 *AT 75% RH DH 300 SENSIBLE HEAT 30% 40% 50% 60% 70% 80% OUTPUT kW* TO AIR 22.4 ELECTRICAL INPUT kW* Electrical data 35˚C Supply 30˚C 19.8 6.2 17.5 5.9 Nominal power consumption FLA V/ph/Hz 230/1N/50 400/3N/50 400/3N/50 400/3N/50 kW 2.5 2.5 6.7 10.0 25˚C amps 19.0 8.1 15 26 20˚C 15.1 5.5 13.3 5.1 Maximum supply fuse amps 30 16 24 35 15˚C LRA (compressor start) amps 61 30 101 135 10˚C 0 100 200 300 400 500 600 11.4 amps 28 13 34 55 optional: top box top box - - 4.7 *AT 75% RH Litres/24 hours LRA (compressor soft-start option) 6.8 DH 600 Heater Type Heat output Power supply kW V/ph/Hz electric electric - - 9kW 9kW - - - - 230/1N/50 400/3N/50 FLA amps 36 12 - - Maximum fuse size amps 50 16 - - SENSIBLE HEAT 30% 40% 50% 35˚C 60% 70% 12.0 25˚C 34 11.3 20˚C 29 10.5 15˚C 25 9.8 0 200 400 600 800 1000 Dimensions 660 660 980 1730 Depth mm 660 660 826 1250 Height mm 1313 1313 1475 1600 Weight kg 130 130 220 497 BSPM ¾ ¾ 1½ 1½ Condensate drain size Options • Top or rear fan outlet • Top discharge box with heater options • High pressure fan • LPHW heater • Return air filter • Heat recovery to water • Condensate pump • External condenser unit • Compressor soft start • Remote humidistat 13.0 38 Litres/24 hours mm ELECTRICAL INPUT kW* 30˚C 10˚C Width 80% OUTPUT kW* TO AIR 43 CALOREX DH 150 / 300 / 600 1200 22 9.0 *AT 75% RH Technical support and service: Comprehensive engineering support is provided by our experienced and well qualified team COMPREHENSIVE SUPPORT Calorex dehumidifiers are designed and are supported in the UK by our comprehensive customer service organisation. To ensure equipment is correctly sized and specified, we offer a computerised quotation service which enables an accurate speedy response to enquiries. Comprehensive engineering support is provided by our experienced and well qualified team. Dehumidifiers DH v1 tel +44 (0)1621 856611 www.calorex.com Maldon CM9 4XD United Kingdom
Similar documents
Dehumidifiers
Performance Operating temperature range Dehumidification @ 30°C/60% RH Heat recovered to air @ 30°C/60% RH Air flow External static pressure Sound pressure level @ 3m Refrigerant Electrical data Su...
More information