Complete range of pumps for heating and air conditioning

Complete range of pumps for
heating and air conditioning
Alfa Max circulators
RELIABLE AND INNOVATIVE
Quality and energy saving
Complies to Erp 200/125/CE
The Antares team being always attentive
towards the necessities of it's customers;
have developed a range of circulators
that comply to the current and future
regulations, in terms of energy
consumption, creating a range of
innovative and futuri stic products,
improving the level of quality in these
typs of spares, advancing the first
ciculators of excellent quality and
extremely energy saving.
The Directive Erp 200/125/CE includes
all those products that can contribute
significantly to energy savings through
their use for this reason the group Antares
decided to create circulators that meet
these requirements, and are already
compliant to Erp 2015 to assert in the
year 2015.
The European Directive provides for the
The pumps of the future
These types of products have forced us
to look to the future creating a special
range of articles of a low ecological
impact, Alfamax, taking upon itself the
warranty and quality that looks to the
future.
compulsory use of wet rotor circulators.
• Starting from 01.01.2013 with EEI
coefficient less than 0.27 installed outside
of the heat generator (boiler).
• Starting from 01.08.2015 with EEI
Energy saving
coefficient of less than 0.23 even if
Thanks to it's futuristic components the
AlfaMax ciculators fully guarantee a class
A consumption with a coefficient EE1
inferior to 0.20.
integrated into the heat generator (boiler)
Structural quality
• Anticorossive treatment of body: body
in cast iron surface cataphoresis treated.
This treatment stops the corrosion and
allows an efficient function in time and
without problems even under extreme
conditions.
• Function of movement optimized by the
use of shaft and ceramic bearings
guaranteeing a long life throughout time.
• Equipped with isolating shell in order
to avoid heat dispersion and narrow
down time and installment costs.
and solar stations.
• Starting from 01.01.2020 with EEI
coefficient of less than 0.23 even for
replacements integrated into existing
heat generators (boilers).
Simple and
intuitive
setting
Simple and intuitive setting
Simple to use
The modern display allows for the setting
of four types of functions
• Constant pressure on max (HCP) and min.
(LCP) level.
HCP
LC P
• Proportional pressure on max. level (HPP)
and min.(LPP).
HPP
LPP
• Fixed speed min ( I ), medium ( II ) max
( III ).
I
II
III
• Auto (reset mode): the power of the pump
will adapt automatically to the requirements
of the system, it will increase or decrease
according to the flow of the circulation
consequently saving energy.
Visualizing
consumption in W
Reduction of power
at nightime
This function reduces automatically the
rotation speed reducing progressivly and
Thanks to the functional display it is possible
reaching after two hours a minimum
to see power consumption in W, for closer
consumption of 5 - 10w consequently saving
and more attentive care towards
energy.
energy consumption.
Various models for performance
and threads
Structural characteristics:
Pump with wet rotor
Voltage and feed 230V 50Hz
Minimum power absorbtion 3w
Maximum power absorbtion 45w
Energetic efficient rate <0.20
Incorporated electronic protection
Functioning temp. +2°C - 110°C
Protection class IP42 - isolation class F
Max. pressure 10bar
Energy coefficient :A
165 mm.
134 mm.
Ø
10 6 m m .
H
Art. P.064 - Circulation pump with wet rotor high energy efficienty , certified in class A, and with energetic coefficient EEI inferior to 0.20.
With wet rotor, complete of shell - 2 years warranty
Already conformed to the new European legislations Erp 200/125/CE
Prevalence
max. mt
Flow
max lt/
min.
4
44
5
50,5
6
60
Art code
P.064.49
P.064.48
P.064.59
P.064.50
P.064.58
P.064.69
P.064.64
P.064.60
P.064.68
P.064.62
RS --/ 40
Type
Alfa Max
Hight
H
Threads
Ø
W
RS 15/40
RS 25/40
RS 15/50
RS 25/50
RS 25/50
RS 15/60
RS 20/60
RS 25/60
RS 25/60
RS 32/60
130
180
130
130
180
130
130
130
180
180
1" M.
1 1/2" M.
1" M.
1 1/2" M.
1 1/2" M.
1" M.
1 1/4" M.
1 1/2" M.
1 1/2" M.
2" M.
22
22
32
32
32
45
45
45
45
45
RS --/ 50
RS --/ 60
H(m)
H(m)
H(m)
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
0.2
0.6
1.0
1.4
1.8
2.2
2.6
3.0 Q (m3 /h)
0.2
0.6
1.0
1.4
1.8
2.2
2.6
3.0 Q (m3 /h)
0.2
0.5
1.0
Via degli Alpini, 144 - 55100 LUCCA - Italy
Tel. 0583 473701 - Fax 0583 494366 - email: [email protected] - www.antaresint.com
1.4
1.8
2.2
2.5
3.0
3.4
3.6 Q (m3 /h)