French Wind Power Industry - Syndicat des énergies renouvelables

Transcription

Directory of the
French Wind Power Industry
Annuaire de l’industrie éolienne française
2014
CHAMPAGNE-ARDENNE:
LEADING THE WAY IN WIND POWER
1
# FRENCH REGION
FOR WIND POWER
IN TERMS OF
INSTALLED CAPACITY
UÊÊÓä£Î\ÊÈäÊÜ`Êv>ÀÃÊ>`ÊÈÓÊ>ÃÌÃ]Ê
ÃÌ>i`ÊV>«>VÌÞÊvÊ£]ÓÈ{Ê7ÊÃÀi
UÊÊÞÊÓäÓä\ÊÌ>À}iÌÊvÊÓ]nÇäÊ7
ÀiÊÞÕÊvÊÜ`Êv>ÀÊìÛi«iÀ]Ê>ÊÃiÀÛViÊV«>ÞÊ
ÀÊ>ÊiµÕ«iÌÊ>Õv>VÌÕÀiÀÊvÀÊÌiÊÜ`ÊÃiVÌÀ¶
With its firm commitment to renewable energy, the Champagne-Ardenne
region offers you:
UÊV«iÌÌÛiÊÃiÌÕ«ÊVÃÌÃ]Ê
UÊÊ>ÊÃÌÀ>Ìi}VÊV>ÌÊÊÌiÊi>ÀÌÊvÊ>ÊÀi}ÊÜÌÊiÊvÊÌiÊ}Ài>ÌiÃÌÊ
growth potentials in France,
UÊ>ÊiiÀ}}Ê>ÀiÌÊvÀÊÜ`ÊÌÕÀLiÊ>Ìi>ViÊ>`ÊÀi«ÜiÀ}
UÊÊÃÕLVÌÀ>VÌÀÃÊÃ«iV>Ãi`ÊÊÌiÊwi`ÃÊvÊiÌ>ÜÀ}]Ê
boilers or electronics,
UÊÌÀ>}ÊÃÕÌÃÊÌ>ÌÊiiÌÊÌiÊii`ÃÊvÊÌiÊÜ`Ê«ÜiÀÊÃiVÌÀ°
>«>}iÀìiÊ,i}
i«>ÀÌiÌÊvÊVVÊiÛi«iÌÊ
ìÛiVJVÀV>«>}i>Àìi°vÀ
www.cr-champagne-ardenne.fr
WINDUSTRY FRANCE
THE FRENCH WIND
POWER INDUSTRY
2014 Directory
CONTENTS
FOREWORD
by Arnaud MONTEBOURG, Minister for Industrial Renewal..................................................04
INTRODUCTION
by Jean-Louis BAL, President of the Syndicat des énergies renouvelables
(French Renewable Energy Association) ..........................................................................06
THE WIND POWER INDUSTRY VALUE CHAIN ..................................................08
DIAGRAM OF THE VALUE CHAIN .........................................................................10
LIST OF FIELDS OF SPECIALTY ............................................................................12
MAP OF FRANCE WIND FARMS...........................................................................16
PARTNERS OF THE WINDUSTRY FRANCE PROJECT ......................................19
BUSINESSES SELECTED TO BE PART OF THE WINDUSTRY FRANCE
PROJECT ....................................................................................................................35
TRAINING CENTRES FOR WIND TURBINE MAINTENANCE
TECHNICIANS ...........................................................................................................51
WIND TURBINE MANUFACTURERS .....................................................................57
WIND TURBINE INSTALLATION DEVELOPERS AND OPERATORS ................75
WIND POWER INDUSTRY SUPPLIERS AND SUBCONTRACTORS .............129
INDEX
Alphabetical .............................................................................................................381
By speciality..............................................................................................................386
By region ..................................................................................................................392
Advertisers ................................................................................................................400
Published by the SER, February 2014 – Design/Production: [email protected] – English Translation: ITC Traductions - Editor’s note: The information
published in this directory was provided by the companies. It in no way engages the responsibility of the Syndicat des Energies Renouvelables who cannot
be held responsible for the contents of the businesses’ pages - Photo credits: cover (left to right): © AREVA, © WeserWind/Matthias Iberler, © ENERTRAG,
© AREVA - p 10, 11 (left to right) : © Benoît SEVENO, © B. MENTREL (photos 2, 3), © DR, © SER/ENERCON, © La Compagnie du Vent/Djamel DINE ZITOUT.
FOREWORD
WINDUSTRY FRANCE
is a government-backed industry initiative aiming to
help French businesses succeed in the wind power
industry
In the first edition of this directory, 140 companies operating in France were identified as active
subcontractors in the French wind power industry. As part of its efforts to reindustrialise the country,
the Ministry for Industrial Renewal decided to found Windustry France, as a way of supporting
the sector’s small and mid-sized businesses. The initiative aims to showcase French expertise
and how it can be transposed to both the onshore and offshore wind energy industries. At the
very core of the “made in France” campaign, the companies identified by the Windustry France
initiative operate at all stages of the value chain, from parts manufacture (masts, generators,
brakes, blade orientation systems, yaw drives, electrical components, power electronics, etc.) to
related activities such as site development, power grid connection, civil works, and the transport,
assembly and storage of wind turbine parts. The Windustry France directory of skills and expertise
in wind power production now features over 250 companies from France’s industrial base.
Windustry France also has a programme to provide individual assistance and support so that
companies seeking to break into new markets can diversify into the wind power industry. Led by
the Syndicat des Energies Renouvelables (France’s Renewable Energy Association), Windustry
France is a strategic reindustrialisation tool which, with the support of the Ministry for Industrial
Renewal, can help businesses that have historically been active in the energy, automotive, rail,
naval, and aviation sectors.
Industrial renewal is a vital issue for France, requiring the commitment of both the State and
all the country’s economic forces, whatever their field of operation. It is to be achieved through
thirty-four industry programmes, one of which is entirely dedicated to renewable energy.
4
WINDUSTRY FRANCE - THE FRENCH WIND POWER INDUSTRY 2014
With transition to new energy sources on the horizon, France must build an industrial base that
will ensure independence for both its energy supply and its economy. Windustry France will help
achieve this objective as well as helping businesses in the wind power sector keep their promise
© Ministère du Redressement Productif
of creating 50,000 new jobs by 2020.
Arnaud MONTEBOURG
Minister for Industrial Renewal
5
INTRODUCTION
WINDUSTRY FRANCE
and the 2014 French Wind Power Industry Directory
THE FRENCH GOVERNMENT HAS ENTRUSTED THE COUNTRY’S WIND POWER INDUSTRY, AS
REPRESENTED BY THE SYNDICAT DES ENERGIES RENOUVELABLES (SER - FRENCH RENEWABLE
ENERGY ASSOCIATION), WITH THE MANAGEMENT OF ITS OWN INDUSTRIAL RESTRUCTURING
PROGRAMME, WINDUSTRY FRANCE, INCLUDING USING THE PUBLIC FUNDS IT HAS RECEIVED
AS EFFICIENTLY AS POSSIBLE, TO EXPAND ACTIVITY IN THIS PROMISING NEW FIELD.
The programme focuses on providing customised support and guidance to businesses, in order to
help them develop new industrial processes so as to win contracts from wind power contractors,
thus diversifying their activity and creating new jobs. The goal of the programme is to provide
assistance to at least 50 businesses: 20 in 2013 and 30 more in 2014. Beneficiaries of the
programme are selected by contractors in the wind power industry, who are the programme’s
partners and members of its steering committee. Assistance begins with an audit of a company’s
industrial plant by a wind power expert, who will make a list of recommendations that the
company will have to follow if it is to satisfy purchasers. The next stage of support is provided
by a technological expert, who advises the company on the investments it will need to make in
order to fulfil the recommendations of the wind power expert.
The Windustry France directory complements this individual support programme by mapping
the French wind power industry. It is intended to provide an overview of all the players involved
in the industry, on the one hand showcasing what French manufacturers have to offer (such as
electrical and mechanical parts, and industrial and technical services), and, on the other, listing
the contractors operating in the wind power industry - wind turbine manufacturers, power plant
developers and operators, etc., on whose strategic choices will depend the ability of French
subcontractors to develop their business.
6
The 2014 edition of the directory also includes other types of player, including Windustry France’s
regional partners (e.g. Chambers of Commerce, clusters, and development agencies), who take
the activities conducted by the Syndicat des Energies Renouvelables and players in the wind
power sector to the regions, and training centres for wind turbine maintenance technicians, who
will represent a significant proportion of the jobs created by the development of the wind power
industry in France.
Jean-Louis BAL
President of the Syndicat
des énergies renouvelables
7
VALUE CHAIN
© Areva
THE WIND POWER
INDUSTRY VALUE CHAIN
8
> ONSHORE WIND ENERGY
Altogether, France’s onshore wind farms have a total capacity of over 8,000 MW. A wind turbine
consists of a number of sophisticated sub-assemblies that transform the wind’s mechanical energy
into electricity. A wind turbine generally comprises the following components:
• a rotor comprising three blades and a hub
• a nacelle consisting of a frame, gearbox, generator, and a shell made of composite materials
• a tower consisting of a mast, electric converters, a transformer, and a control system.
Today, onshore wind turbines have multi-megawatt power ratings ranging from 2 to 3 MW on average,
but a few particular machines have even greater capacity.
> OFFSHORE WIND ENERGY
France has Europe’s second highest potential for offshore wind energy and has set a goal of
installing 6,000 MW off its coasts by 2020. One of the main differences between onshore and
offshore wind turbines lies in the latter’s foundations, which are based on the same technology as
is used for oil rigs. Installing wind farms offshore enables to increase generator capacity. Currently,
turbines are available with capacities of 5 to 6 MW, and turbines with up to 8 to 10 MW of power
are under development.
> DOMESTIC WIND POWER
Small or domestic wind power is used by private individuals who install a turbine in their garden.
Domestic wind turbines have capacities of less than 36 kW, range from 10 to 35 m high, and have a
total diameter of 2 to 10 m.These installations are especially useful when combined with photovoltaic
and energy storage devices to supply power to isolated areas not connected to a power grid.
9
DIAGRAM
DIAGRAM
OF THE VALUE CHAIN
PROJECT DEVELOPMENT
Wind studies - Environmental studies Technical surveys etc.
ROAD CONSTRUCTION
SPECIAL TRANSPORT
Smelted parts
WIND TURBINE ASSEMBLY
Onshore - Domestic wind power - Offshore
Masts and bases
Nacelles
Blades
Flanges and slewing rings
Electrical materials and equipment
PARTS MANUFACTURE
Mechanical parts
Brakes
10
THIS DIAGRAM SHOWS THE VARIOUS STAGES OF THE WIND FARM VALUE CHAIN, FROM
PROJECT DEVELOPMENT TO MANUFACTURE OF WIND TURBINE PARTS, AND COMMISSIONING
AND OPERATION OF THE INSTALLATION.
SITE PREPARATION
Geotechnical surveys
Foundations and earthworks
Electrical engineering
ASSEMBLY
GRID CONNECTION
COMMISSIONING
OPERATION AND MAINTENANCE
11
FIELDS
22 FIELDS OF SPECIALTY
TECHNICAL SURVEYS, DESIGN OF MECHANICAL AND ELECTRONIC ELEMENTS, MANUFACTURE OF
STEEL AND COMPOSITE PARTS, CIVIL WORKS, ELECTRICAL ENGINEERING AND MAINTENANCE–
THE WIND POWER INDUSTRY EMBRACES A VARIETY OF TRADES.
Contractors
WIND FARM DEVELOPERS
The development of a wind farm project starts with the identification of a potential
site, discussions with local communities and landowners, environmental studies, and
obtaining administrative authorisation. This is followed by site preparation, supply and assembly of
the wind turbines, connection to the power grid, and commissioning.
WIND TURBINE MANUFACTURERS
There are several types of wind turbine manufacturers. Some are merely integrators,
while others prefer to be in charge of the production of certain key components. Still
others handle all aspects of turbine manufacture, right from the design stage to the manufacture
of almost every part, and final assembly.
WIND FARM OPERATORS
The operator comes into the picture when the wind turbine is ready to be commissioned.
The operator is the producer of the electricity that is injected into the power grid. Operators
oversee and maintain the wind turbines, either using their own teams or external service providers.
Parts Manufacture
BLADES
The average blade on a modern wind turbine is 30 to 80 metres long. Its shaping closely
resembles that of an aeroplane wing or a ship’s hull.
12
NACELLES
The nacelle is the compartment housing the parts at the top of the wind turbine. It is
normally made of composite materials.The process for making the nacelle and the nose
cone is the same as for a blade, although nacelles do not require the same level of precision or
strength. Nacelles are usually made up of multiple sections.
CAST PARTS
The processes for making the nacelle frame and hub are the same: they are both large,
smelted, machined parts. The framework for a 2 MW turbine generally consists of two
or three pieces that can weigh up to 4,500 kg each.
FLANGES AND SLEWING RINGS
A slewing ring transfers force from a turning part of a mechanism to a fixed part. In the
case of a wind turbine, slewing devices allow the rotor and blades to change direction
depending on the direction and force of the wind.
ELECTRICAL MATERIALS AND COMPONENTS
Components are assembled and integrated into various subassemblies throughout
the wind turbine, including the generator, power converters, motor reducers, wiring,
transformers, and control systems.
BRAKES
If necessary, especially when wind speed is too high, disc brakes can be used to stop
the wind turbine in no more than a few rotations. The system allows the turbine to brake
gently without putting too much strain or fatigue on the tower or mechanical elements.
MECHANICAL PARTS
Power transmission is one of the keys to a wind turbine’s output and capacity. An array of
mechanical and hydraulic parts transmits the wind’s kinetic energy to a gearbox, which
transfers the rotating movement at more than a thousand rotations per minute to the generator,
which converts the energy to electricity.
MASTS
Wind turbine masts are made of steel or reinforced-concrete conical tubes. Modern towers
range from 65 to 140 m in height. The base of the mast can be over 5 m in diameter,
13
but the mast becomes narrower towards the top, usually reaching about 3 m in diameter. Towers
usually come in three or four sections.
Site Preparation
GEOTECHNICAL SURVEYS
Before a wind turbine is assembled, geotechnical surveys are conducted to inspect the
subsoil structure and determine the necessary size of the foundations. Such surveys
include taking soil samples and analysing them in a laboratory.
WIND MEASUREMENTS
Wind measurements are taken before building a wind farm, in order to measure the
quality of the wind on site and determine the best position for the turbine. Turbines are
also equipped with wind measurement devices to help determine the direction of the rotor and
blades, so that the turbine always produces a maximum amount of energy.
ELECTRICAL ENGINEERING
Companies specialising in electricity transport and distribution systems are involved
early in the project, to find the best technical solution for evacuating energy produced
to the power grid. They provide electrical equipment that is integrated into city gate stations, as well
as cables to link wind turbines together. They also work at construction sites to install underground
cables and build city gate stations and connections.
FOUNDATIONS AND EARTHWORKS
Safe access to the site must be provided so that the wind turbines can be delivered
and assembled. Roads must be widened and sometimes reinforced. Earthwork and
foundation-building services are generally performed by local companies specialising in civil
engineering and road-building.
EXPERT ASSESSMENTS
Engineering offices specialising in the wind power industry assist developers throughout
a project, conducting the necessary expert evaluations, such as assessment of the total
arising, structural calculations, and modelling of electrical installations, etc.
14
INSPECTION OFFICES
Inspection offices are authorised to help both the initial contractor and the companies
contracted to provide the services required. They check to ensure that wind turbine
installations comply with prevailing regulations, from dimensioning through to construction and
operation.
Commissioning
SPECIAL TRANSPORT, LOGISTICS, HANDLING, AND HOISTING
Each wind turbine is transported in several pieces, most of which require special transport.
Ocean or river transport is preferred. The pieces are then taken the rest of the way by
lorry to the installation site.
AIRCRAFT WARNING LIGHTS
As a safety measure, wind turbines must be marked and visible from the air. Current
technology uses powerful LED lights, with all the lights on a single wind farm blinking
simultaneously.
ASSEMBLY AND MAINTENANCE
The process for unloading and assembling wind turbine parts requires two cranes: one
very high capacity crane (at least 800 tonnes and a minimum 100 m boom) and a
medium-capacity crane (about 120 tonnes) that can turn parts around, for example, from a horizontal
position to a vertical one or vice versa.
Wind turbine maintenance requires skills in mechanics and electrical engineering, as well as
familiarity with IT tools and the ability to work at great heights.
OFFSHORE
The expertise required to build offshore wind turbines is similar to that needed for building
offshore oil rigs. The skills of the shipbuilding and maritime industries are indispensable
when constructing or maintaining offshore wind farms.
DOMESTIC WIND POWER
Small wind turbines are often manufactured by smaller businesses and sold locally. Designers
come up with all sorts of ideas for creating silent, pleasant-looking machines that can work
with a wide range of wind speeds, in their attempts to satisfy the requirements of private individuals.
15
MAP OF FRANCE
MAP OF FRANCE
WIND FARMS
t/EEZ'zdZ<
ZKZWZZ'/KE
ĂƉĂĐŝƚǇĐŽŶŶĞĐƚĞĚ
ĂƚϯϭͬϭϮͬϮϬϭϯ
ƐƟŵĂƟŽŶ ŽĨ ƚŚĞ ǁŝŶĚ
ĞŶĞƌŐǇ ƉƌŽĚƵĐƟŽŶ ŝŶ ϮϬϭϯ
ƐƟŵĂƟŽŶ ŽĨ ƚŚĞ ƉŽƉƵůĂƟŽŶ
ƐƵƉƉůŝĞĚ ďǇ ǁŝŶĚ ĞŶĞƌŐǇ
ĞůĞĐƚƌŝĐŝƚǇ ŝŶ ϮϬϭϯ
ǀĞƌĂŐĞ ĐŽǀĞƌĂŐĞ ŽĨ ƚŚĞ
ƚŽƚĂů ĐŽŶƐƵŵƉƟŽŶ ďǇ
ǁŝŶĚ ĞŶĞƌŐǇ ŝŶ ϮϬϭϯ
ϭ DĞŐĂǁĂƩ ;DtͿ с ϭ͕ϬϬϬ ŬŝůŽǁĂƩƐ ;ŬtͿ
ϭ DĞŐĂǁĂƩŚŽƵƌ ;DtŚͿ с ϭ͕ϬϬϬ ŬŝůŽǁĂƩŚŽƵƌ ;ŬtŚͿ
K&&^,KZt/E&ZDZ^
E'>/^,,EE>
ƌŝƩĂŶǇ
ϳϴϮDt
ϭ͕ϰϬϲ'tŚ
ϱϬϰ͕ϱϵϲ
ϲ͘ϭй
^ĂŝŶƚƚͲ
ƌŝĞƵĐ
t/EWKtZ
W/dz
KEEd
ϭ ϬϬϬ Dt
ϳϬϬ Dt
ϰϬϬ Dt
ϮϬϬ Dt
^ĂŝŶƚͲE
^ĂŝŶƚ
EĂǌĂŝƌĞ
Ğ
ϭϬϬDt
2ůĞƐĚ͛zĞ
ĞƵĞƚ
Ƶ
ĚĞE
Ě
EŽŝƌŵŽƵƟĞƌ
ƌŵ
ŵŽƵƟĞƌ
ŵ
ŽƵƟĞƌ
ŽƵƟ
ŽƵ
ϱϬ Dt
ϯϬ Dt
'ƵĂĚ
ĚĞ
Ğ ƉĞ
ĞůŽƵƉ
ϮϲDt
ϰϳ'tŚ
ϭϵ͕ϬϬϬ
E
ĂƐ
ĂƐƐ
ĂƐƐĞ
ĂƐƐĞ
ƐƐĞ
ƐĞͲdĞƌ
ddĞƌ
ĞƌƌƌƌĞ
ϱ Dt
ϯϬŬŵ
Ϭ Dt
DĂƌƟ
ƟŶ
Ɵ
ŶŝƋƵĞ
ϭDt
Ϯ'tŚ
ϴϬϬ
E
ƌĞĂƐ ŽĨ ƚŚĞ ĮƌƐƚ ƌŽƵŶĚ
;ĂůůŽĐĂƟŽŶ ŝŶ ϮϬϭϮͿ
&Žƌƚ
&Ž
&ŽƌƚͲĚĞͲ&ƌĂŶ
ŽƌƚͲĚĞͲ&ƌĂ
Žƌƚ
ͲĚĞͲ&
ĚĞ &ƌĂŶĐĞ
ĂŶ Ğ
ƌĞĂƐ ŽĨ ƚŚĞ ƐĞĐŽŶĚ ƌŽƵŶĚ
;ĂůůŽĐĂƟŽŶ ŝŶ ϮϬϭϰͿ
d>Ed/
KE
ϮϬŬŵ
ZĞƵ
ƵŶŝŝŽŶ
ƵŶŝŽ
^ƚͲĞŶŝƐ
ŶŝƐƐ
ϭϱDt
Ϯϵ'tŚ
ϭϭ͕ϵϬϬ
E
ϮϱŬŵ
^ƚWŝĞƌƌĞĞ
^ƚ
WŝĞƌƌĞ Ğ
ĞƚDŝƋ
ƚ DŝƋ
ƋƵĞůŽŶ
ϭDt
Ϯ'tŚ
ϳϬϬ
E
EĞǁ
ĞǁĂůĚ
ůĚ
ĚĞŽ
ĞŽŶŝ
ŶŝĂ
Ŷ
ϯϴDt
ϲϳ'tŚ
Ϯϳ͕ϲϬϬ
E
E
^ƚͲWŝĞƌƌĞ
ϭϱŬŵ
ϭϯϬŬŵ
ŶŐůĂŶ Ě
;hE/d</E'KDͿ
Ed,Z>E^
EKZd,^
>' /hD
© THINK UP
EŽ
EŽƌĚͲWĂƐĚĞĂůĂŝƐ
ϱϯϬDt
ϭ͕Ϭϴϵ'tŚ
ϱϬϱ͕ϳϲϴ
Ϯ͘ϵй
>
>ŝ
>ŝůůĞ
>ĞdƌĠƉŽƌƚ
&ĠĐĂŵƉ
ŵŝĞŶƐ
ŵŝĞ
ŵ
ŝĞŶƐ
Ğ
ĞŶ
ŽƵƌƐĞƵůůĞƐͲƐƵƌͲDĞƌ
hƉƉ
ƉĞƌEŽƌŵĂŶĚǇ
ƌEŽƌŵĂŶĚǇ
>hy D KhZ'
ϮϰϵDt
ϱϭϱ'tŚ
ϮϬϬ͕ϰϰϰ
Ϯ͘ϳй
Ă
ĂĞŶ
ZŽƵĞŶ
ƵĞŶ
WŝĐĂƌĚǇ
ϭ͕ϭϰϲDt
Ϯ͕ϭϰϲ'tŚ
ϴϱϲ͕Ϭϵϭ
ϭϰ͘Ϯй
W
W
Z/^
Z
Z/^
> ĞƌEŽƌŵĂŶĚǇǇ
>ŽǁĞƌEŽƌŵĂŶĚǇ
>ŽǁĞ
ŚąůŽŶ
ŚąůŽ
ŚąůŽ
ŽŶ
Ž
ŶƐ
ŶƐͲĞŶ
ŶƐͲ
Ŷ
ƐƐͲĞ
ĞŶͲ
ŶͲŚĂŵƉĂŐŶĞ
ŚĂŵƉĂ
ƉĂŐŶĞ
ŐŶĞ
ŐŶ
Ğ
/ůĞͲĚĞͲ
/ůĞͲĚ
ͲĚ
ĚĞͲ
ĚĞ
ĞͲ&ƌĂŶĐĞ
ͲͲ&ƌĂŶĐĞ
ϮϮϳDt
ϰϱϰ'tŚ
ϭϰϵ͕Ϯϴϲ
ϰ͘Ϭй
ZĞŶŶĞƐ
Z
ĞŶŶĞƐ
ŶŶĞƐƐ
'ZDEz
DĞƚǌ
DĞ
DĞƚǌ
Ğ
ϯϭDt
ϲϬ'tŚ
Ϯϵ͕ϯϮϬ
Ϭ͘ϭй
ϳϭϵDt
ϭ͕ϮϮϱ'tŚ
ϰϴϵ͕ϮϱϮ
ϱ͘ϲй
WĂǇ
WĂǇƐ
ĂǇƐĚĞůĂ>Ž
ǇƐ ĚĞůĂ>Ž
>ŽŝƌĞ
>Ž
ŽŝƌĞ
Ž
ŝƌ
ϱϯϱDt
ϵϴϯ'tŚ
ϯϱϵ͕ϯϱϭ
Ϯ͘ϯй
ŚĂŵƉĂ
ŚĂŵƉĂŐŶ
ƉĂĂŐŶĞͲƌĚ
ƌƌĚ
ĚĞŶŶĞ
ĚĞ
KƌůĠĂŶƐ
ϭ͕ϮϴϯDt
Ϯ͕ϰϱϭ'tŚ
ϵϲϭ͕ϳϰϰ
ϮϮ͘ϯй
ĞŶ
ĞŶƚ
ĞŶ
Ŷƚ
ŶƚƌĞ
ϳϴϭDt
ϭ͕ϰϵϲ'tŚ
ϱϬϲ͕Ϭϴϱ
ϳ͘ϲй
EĂŶƚƚĞ
EĂŶƚĞƐ
Đ
ů
ϭϮDt
E
E
E
ƵƌŐƵŶĚǇ
ƵƌŐƵŶĚǇ
ƵƌŐƵŶĚ
ƵŶĚǇǇ
ϭϱϬDt
ϮϯϮ'tŚ
ϴϲ͕ϵϯϮ
ϭ͘ϵй
ŝũŽŶ
ŽŶ
ĞƐĂ
ĞƐ
ĞƐĂŶĕ
ĞƐĂŶ
ƐĂĂŶĕŽŶ
^t /d Z> E
&ƌĂŶ
ƌĂŶĐŚĞ
ĞͲŽŵƚĠ
Ğ
Ž
ŽŵƚĠ
ϯϬDt
E
E
E
ƵǀĞ
ƵǀĞ
ǀĞƌŐŶĞ
ǀĞƌŐŶĞ
ĞƌŐŶĞ
WŽŝƟ
ƟĞƌƐ
ƟĞ
Ɵ
^ƚƌĂƐďŽƵƌŐ
^ƚ
ƚƌ
>ŽƌƌĂŝŶĞ
ŶĞ
ϭϴϴDt
ϯϰϱ'tŚ
ϭϯϭ͕ϱϮϲ
ϯ͘ϰй
WŽŝƚŽƵͲ
ŽƵͲŚĂƌĞŶƚĞƐ
ŽƵͲ
ĞƐ
ϯϮϱDt
ϲϭϴ'tŚ
ϮϬϳ͕ϯϲϮ
ϰ͘ϱй
>ŝŵŽŐĞƐ
ĞƐ
ůĞƌŵ
ůĞƌŵ
ŵŽŶƚͲ&Ğƌƌ
ŵ
ƌƌĂŶĚ
ƌƌ
ĂŶ
> ŽŶ
>Ǉ
>ǇŽŶ
ZŚƀŶĞ
ZŚƀŶĞ
ZŚƀŶĞͲůƉĞ
ŶĞͲ
ŶĞͲůƉĞ
Ğ
ĞƐƐ
Ğ
ϭϲϵDt
ϯϵϵ'tŚ
ϭϲϮ͕ϲϮϵ
Ϭ͘ϳй
>ŝŵŽƵƐŝŶ
>ŝ
ŝŵŽƵƐŝ
ƵƐŝŶ
ϰϱDt
ϳϲ'tŚ
Ϯϴ͕ϮϬϲ
ϭ͘ϱй
/d>z
ŽƌĚĞĂƵǆ
DŝĚŝ WǇƌĠŶĠĞƐ
DŝĚŝͲWǇƌĠŶĠĞƐ
DŝĚŝͲWǇƌĠŶĠ
ƋƵŝƚĂŝŶĞ
ƋƵŝƚĂŝ
ĂŝŶĞ
ϰϬϭDt
ϴϵϳ'tŚ
ϯϮϮ͕ϰϲϳ
ϰ͘ϰй
dŽƵůŽ
dŽƵůŽƵ
ůŽƵ
ŽƵƐĞ
>ĂŶŐƵ
>ĂŶŐƵĞĚŽĐͲZ
ŐƵĞĚ
ĞĚŽĐͲZ
Ě ZŽƵƐƐŝůůŽŶ
ZŽƵƐ
ŽƵƐƐŝůůŽŶ
ůůŽŶ
Ŷ
ϰϳϵDt
ϭ͕Ϯϵϲ'tŚ
ϰϰϴ͕ϲϳϬ
ϳ͘ϰй
WƌŽǀĞŶĐĞͲůƉĞƐͲƀ
W
WƌŽǀĞŶĐĞͲůƉĞƐͲƀƚĞĚ͛ǌƵƌ
ĞŶĐĞͲůƉĞ
ĞͲ ĞƐͲƀƚĞĚ
ƀƚĞĚ͛ǌƵ
ƀƚĞ Ě
Ě͛ǌƵ
ǌƵ
Ƶƌ
Ƶƌ
ϰϱDt
ϭϭϲ'tŚ
ϯϴ͕ϴϭϮ
Ϭ͘ϰй
DŽŶ
DŽ
DŽŶƚ
ŶƚƉĞůůŝĞ
Ŷ
ƚ ůů Ğƌ
Ğ
DKEK
DĂĂƌƐĞŝůůĞ
D
ĂƌƐĞŝůůĞ
ŝůůĞ
Ğ
D/dZZEE^
EKZZ
ŽƌƐŝĐĂ
ϭϴDt
Ϯϭ'tŚ
ϳ͕Ϭϰϭ
Ϭ͘ϵй
^ W /E
EŽƵŵĠĂ
ϬŬŵ
ϱϬ
ϭϬϬ
ϭϱϬŬŵ
^ŽƵƌĐĞƐ͗WĂŶŽƌĂŵĂŽĨƌĞŶĞǁĂďůĞĞŶĞƌŐǇŝŶϮϬϭϯZd͕^Z͕Z&͕Ğ&Θ^ZĞƐƟŵĂƚĞƐ
ũĂĐĐŝŽ
ũĂĐ
ũĂ
ĐĐŝŽ
ŝ
PARTNERS OF
THE WINDUSTRY
FRANCE
PROJECT
Get spotted !
Ô CONTACT US
16, rue Chevreul - 75011 Paris - FRANCE
Tél. : + 33 (0)1 43 70 98 88
Fax : + 33 (0)1 43 70 49 41
Mail : [email protected]
Advertising space sales
and editing agency
CREATIFSAGAGES.COM
We would like to thank the advertisers
and SER without whom this directory
would not have been possible
PARTNERS
BRETAGNE DEVELOPPEMENT
INNOVATION
1 bis route de Fougères, 35510 Cesson-Sévigné
+33 (0)2 99 84 53 00
+ 33 (0)2 99 84 01 20
www.invest-in-bretagne.org/energies-marines [email protected]
ORGANIZATION
As a interactive hub overseeing Bretagne’s economic activities, Bretagne Développement Innovation operates across
three main areas:
• Providing greater structure to the region’s core industries (marine energy, shipbuilding, pleasure boating, ICT, energy,
materials, vehicles and mobility...)
• Fostering innovation in business
• Driving the region’s inward invest and branding strategy
TRAINING CENTRES
Bretagne Développement Innovation (BDI) is Bretagne’s regional development and
innovation agency.
BUSINESSES SELECTED
B
LOCATIONS
Head office in Rennes, and offices in Brest.
21
SUPPLIERS
DEVELOPERS/OPERATORS
As part of its MRE sector strategy and with backing from Bretagne Regional Council, BDI is leading the development
of Bretagne’s MRE sector and is responsible for promoting it. This involves the agency overseeing business support
organisations, especially for offshore wind. BDI’s partners are Pôle Mer Bretagne, Bretagne Pôle Naval, Bretagne
Commerce International, the regional Chambers of Commerce network, Université Européenne de Bretagne, and the
businesses associated with current projects.
Bretagne does feature some strong assets: ability to conduct consultations, high potential in offshore technologies
(fixed and floating wind, wave, tidal and tidal stream); a network of capable, diverse, MRE-related SME’s, core industrial
partners in position, effective university and life-long learning provision, and the largest concentration of technical and
marine sciences in France. Above all, Bretagne has the political will to seize this opportunity.
MANUFACTURERS
ACTIVITIES
Industry Cluster
PARTNERS
BUSINESSES SELECTED
B
BRETAGNE POLE NAVAL
3 rue Marie Dorval, 56100 Lorient
+33 (0)9 83 71 30 44
+33 (0)2 97 02 40 58
www.bretagnepolenaval.org [email protected]
ORGANIZATION
ACTIVITIES
90 companies with proven technical skills organised by working group are the pillars of the BPN MRE cluster. From
design right through to maintenance, the entire value chain in the Marine Renewable Energy sector is represented within
the MRE Cluster. With expertise acquired in the naval sector, the industrial players specialize in five technologies: tidal
energy, bottom-fixed offshore wind turbines, floating offshore wind turbines, wave energy, and ocean thermal energy.
The development of the MRE sector is a major issue for all Breton businesses, and they are committed to promoting
an excellence initiative to the benefit of the advancement of Marine Renewable Energy.
LOCATIONS
BRITTANY is on the forefront of MARINE RENEWABLE ENERGY development.
SUPPLIERS
MANUFACTURERS
TRAINING CENTRES
BPN is an industry cluster uniting over 125 businesses in the Brittany region of France. BPN is comprised of three
sectors of excellence: Marine Renewable Energy (MRE), Naval, and Offshore Oil and Gas.
22
23
SUPPLIERS
MANUFACTURERS
TRAINING CENTRES
BUSINESSES SELECTED
X
PARTNERS
France’s first business incubator dedicated to renewable energy and energy
g
management
PARTNERS
MANUFACTURERS
TRAINING CENTRES
BUSINESSES SELECTED
C
CCI LITTORAL NORMAND-PICARD
20 rue du Chevalier de la Barre, 80142 Abbeville cedex +33 (0)6 86 66 67 43
www.littoral-normand-picard.cci.fr [email protected]
ORGANIZATION
An interregional player involved in structuring the wind power economic sector:
Led by a wind power professional and with the support of local authorities in Normandy and Picardy, the Chamber of
Commerce and Industry for the Normandy-Picardy coastal region opened the first business incubator entirely dedicated
to renewable energy in September 2009. The incubator is recognised both for hosting and assisting businesses,
particularly in various aspects of the wind power sector, and for its contributions to the development of industrial
diversification in onshore and offshore wind power and hydro-kinetic power.
ACTIVITIES
Housing and assistance to businesses:
The group offers offices (20 to 45 m2 in size) and office/workshop units (230 to 365 m2 in size) with specialised
assistance from renewable energy experts.
The Oust-Marest renewable energy incubator is already home to:
• A maintenance base for onshore wind farms (Enercon Service)
• The head office and a regional office of a developer/operator of onshore wind farms (Energie Team)
• A logistics company for offshore wind energy (STO Logistique).
Industrial diversification into wind and hydro-kinetic power:
• Co-organisation of a variety of events:
4 May 2010: the first “Windustry France” interregional convention for companies at the Renewable Energy Incubator
8 December 2011: the first “Windustry France” business convention in Amiens
1 and 2 October 2013: Third “Windustry France” business convention in Le Havre
• Organisation on behalf of the regional network of economic players in Normandy of the initiative to mobilise
industrial companies for offshore wind farms through the “Vigie-Business-Éolien Offshore” online platform (1,100
business members in the Grand Ouest area of France)
• Organisation of business events with major prime contractors (EDF EN, GDF SUEZ, Areva, Alstom, Siemens, etc.) at
the Renewable Energy Incubator and in various Chambers of Commerce and Industry in the Grand Ouest region (Le
Havre, Fécamp, Caen, Cherbourg, Brest, etc.)
• Along with the Picardy Conseil Régional, organisation of a regional industry diversification initiative for large wind
turbines and a business club for the sector.
LOCATIONS
SUPPLIERS
Upper Normandy, Picardy.
24
PARTNERS
DUNKERQUE PROMOTION
D
BUSINESSES SELECTED
Economic Developement Agency
Bâtiment le Remorquage, 2508 route de l’écluse Trystram, 59140 Dunkerque
+33 (0)3 28 22 64 40
+33 (0)3 28 22 64 41
www.dunkerquepromotion.org [email protected]
ORGANIZATION
TRAINING CENTRES
Economic Developement Agency, Dunkerque Promotion is the regional pilot of Windustry Nord Pas de Calais and is in
charge of the animation of the cluster and promotion of the industrial & logistics expertise in the field of wind turbine.
ACTIVITIES
More than 80 companies are involved in the cluster, you will find a profile of each one on our website :
http://www.dunkerquepromotion.org/contents/files/GUIDEversionfinale.pdf
LOCATIONS
25
SUPPLIERS
MANUFACTURERS
Logistics : operations and maintenance ports, but also industrial and assembly ports in Boulogne-sur-Mer & Dunkerque.
PARTNERS
BUSINESSES SELECTED
E
EOLISSIMA
CCI DE REGION NORD DE FRANCE-
Providing help to the SME of the North of France to reach wind energy markets
299 boulevard de Leeds CS 90028, 59031 Lille cedex
+33 (0)3 20 63 68 00
+33 (0)3 20 13 02 00
www.nordpasdecalais.cci.fr [email protected]
French Chambers of Commerce are public bodies headed by elected business representatives, and dedicated to the
promotion and defense of business interests to the public authorities. They participate in the local development of
businesses, the planning of an attractive business environment and offer a wide range of services to its members.
ACTIVITIES
• Communication around Nord of France’s industrial potential
• Business information through workshops and eolissima.fr website
• Audit and support
• All these actions are related to Windustry Nord-Pas de Calais.
LOCATIONS
Nord-Pas de Calais region.
SUPPLIERS
MANUFACTURERS
TRAINING CENTRES
ORGANIZATION
26
PARTNERS
LE MANS WIND CLUSTER
L
BUSINESSES SELECTED
Business, training, and R&D cluster for the wind power sector in Le Mans and Sarthe
75 boulevard Oyon, 72000 Le Mans Wind Cluster
+33 (0)2 43 57 72 24
+33 (0)2 43 57 72 30
http://reseaulia.com/space/le-mans-wind-cluster
[email protected]
ACTIVITIES
• Business sector: Represented by Le Mans Développement, the business sector brings together local businesses
that wish to invest in wind power, promotes businesses, and facilitates access to calls for tender from major prime
contractors (such as Maser, Chastagner, Fimor, and Net-Wind).
• Training sector: Represented by GRETA and certified by BZEE, training targets is provided for holders of the
Baccalauréat and plays an active role in the structuring of an integrated wind power sector in our region. The only
offshore maintenance training program in France.
• R&D sector: The R&D sector is led by the Université du Mans Acoustic Laboratory (LAUM - CNRS) together with the
Institut Supérieur des Matériaux et Mécaniques Avancées (ISMANS), the Ecole Nationale Supérieure d’Ingénieurs du
Mans (ENSIM), and the Centre de Transfert de Technologie du Mans (CTTM). These research centres are a testimony
to our region’s dynamism and work to develop innovations in acoustics, composite materials, on-board systems, and
mechanical engineering.
MANUFACTURERS
The Le Mans Wind Cluster is a group of private and institutional stakeholders led by Le Mans Développement. The
cluster has three sectors: the business sector (focusing mainly on the maintenance of installations), the R&D sector
and the training sector.
TRAINING CENTRES
ORGANIZATION
27
SUPPLIERS
The Le Mans Wind Cluster unites players from the greater Le Mans area and the French département of Sarthe. The
Le Mans Wind Cluster also acts as a local representative for Néopolia, the Adéo Association, and the Syndicat des
Énergies Renouvelables (SER).
LOCATIONS
PARTNERS
MANUFACTURERS
TRAINING CENTRES
BUSINESSES SELECTED
N
NEOPOLIA EMR
MRE Business Cluster
35 avenue du Général de Gaulle, 44600 Saint-Nazaire +33 (0)2 40 17 21 52
+33 (0)2 40 17 21 45 www.emr.neopolia.fr [email protected]
ORGANIZATION
Neopolia is a network of 180 industrial companies in the Pays de la Loire region. Its 5 business clusters (marine,
oil and gas, aerospace, rail, and MRE) are concrete evidence of its market focus. They reflect the willingness of the
participating businesses to unite around a shared strategy and a common industrial offering to conquer new markets
both in France and abroad.
ACTIVITIES
Néopolia MRE brings together over 85 companies who pool their knowledge and work together to respond innovatively
to the needs of the MRE market. A steering committee composed of 12 directors determines the MRE cluster’s strategic
and commercial goals. The organisation in 8 Strategic Business Units means companies can be grouped according
to expertise to facilitate the development of partnerships and help break into MRE markets.
Each of the 85 companies falls into one or more of the eight SBUs:
1) Land infrastructure
2) Industrial processes and equipment
3) Logistics and the supply chain
4) Primary and secondary steel
5) Integrated systems
6) Complex turbine assemblies
7) Operation and maintenance
8) Service vessels
Each SBU includes one steering company and a cluster of companies. The cluster of companies in each SBU focus
on three specific areas:
• Creating B2B partnerships with the major players in the market in order to identify and determine market needs
• Co-construction of the strategic positioning of the companies
• Individual or collective responses or co-development projects.
Our added value is based on:
• A single point of contact to access an entire network of industry expertise
• Optimisation of your supply chain
• Assistance for co-development projects to increase competitiveness
• Transfer of the best technological solutions from the multi-market expertise of the companies.
LOCATIONS
SUPPLIERS
Pays de la Loire.
28
ACTIVITIES
Lower Nromandy is the territory of the marine renewable energy, and there are few project in devellopement
• a project of manufacturing unit in Cherbourg
• a commercial farm of wind turbine in Coruseule sur mer
• a Tidal Farm project in Raz Blanchard where share approach with wind farm will be essential.
Created in 2012 ONEM is supported by:
• The Regional Council of lower Normandy
• The County Council of La Manche
• The Town of Cherbourg
Onem is the focal point for the deferent state body, the european committee, local actor involved in the different area
of R&D, Training & education & industrial devellopement.
ONEM main action are:
• to develop & manage link with key industrial player in local MRE project
• to manage external relation, the communication and local & international cooperation around the different local project.
• to organise and coordonate relation between State and major industrial companies
• to facillitate setling down of companie in Cherbourg on the area dedicated by Port Normand Authority and more
globally in Lower Normandy
• to promote project tp build up MRE skills and Knowledge to support Off shore WInd project
• to contribute to project acceptability (population & Environmental)
LOCATIONS
North west Suburb of Caen.
29
PARTNERS
TRAINING CENTRES
SPL Public Company
Managing Director: F.Piquet
MANUFACTURERS
ORGANIZATION
3 rue René Cassin, 14280 Saint-Contest
+33 (0)2 61 45 17 30 www.west-normandy-marine-energy.fr
SUPPLIERS
Develop and manage marine renewable energy in Lower Normandy
O
BUSINESSES SELECTED
ONEM (Ouest Normandie Energie
Marine)
PARTNERS
MANUFACTURERS
TRAINING CENTRES
BUSINESSES SELECTED
P
PICARDY - SOMME WIND
POWER NETWORK
Conseil régional de Picardie - Lucas Toussaint 03 22 97 38 99
[email protected] www.picardie.fr
Conseil général de la Somme - Thomas Hutin 03 22 71 82 04
[email protected] www.somme-ecoactivites.fr
ORGANIZATION
Picardie is one of the first onshore wind region of France, with 1.83 TWh of electricity produced in 2012 and is also
involved in offshore wind power development. Our regional plan for wind development targets 2,800 MW by 2020.
According to these assets, the region Picardie and the county of Somme support the development of eco-activities
and structure the wind energy’s field in connection with wind power industries, research teams and public institutions.
ACTIVITIES
A wind power industry which strengthens:
• Professionals of the wind power are highly mobilized, and strengthen their presence in the region: Enercon, H2AIR,
Maïa Eolis, Valorem, Energie Team, … ;
• A large panel of subcontractors in any steps of your project ; engineering offices, public works companies, electricians,
manufacturers for electrics, hydraulics and mechanicals products, specialists of transport and lifting;
• Particular welcome for Green business (renewable energy business incubator, public subsidy for renting buildings,
estate Investments);
• Pioneering public stakeholders (First 100% public wind farm in Montdidier);
• A strong public support in favour of wind power;
• WindLab: a plateform dedicated to the wind turbine technicians training programme certified by the BZEE.
A network of skills and know-how:
• High industrials skills: several renowned companies in aeronautic, composites, hydraulics and mechanics, also
supplies the wind industry (Scott Bader, Nexans, Hempel, Enercon, Nof Metal Coating, Duff Norton, …)
• High Research & Development capacities on wind turbines:Technical & technology transfer centers, French National
Institute for the Industrial Environment and Hazards, research laboratories involved in wind energy project (University,
Engineering Schools …). http://www.picardie.fr/IMG/pdf/catalogue-r_i.pdf
• IndustriLAB: the center of research, innovation, training and technology. IndustriLAB offers 5,000 m² of factory space
and 2,500 m² of office space at the Picardie airport, in an entirely secure building, including confidential areas with
controlled access. IndustriLAB relies on its network of partners (universities, technical centers, industries) to mobilize
the skills and technical resources necessary to your project. http://www.industrilab.fr/
Support for business: • Support for the potentials sub-contractors • Organization of meetings with contractors – subcontractors, including the National Windustry meeting December 8th and 9th 2011 (more than 2,000 business meetings);
• Promotion to the EWEA events • Support for setting up business, constructing and financing projects • Specific
Greenfield and brownfield solutions for green business industries.
LOCATIONS
SUPPLIERS
Picardy.
30
One of the types of renewable energy currently under development is marine energy, which includes attractive
technologies to respond to European energy development issues. Marine energy causes fewer disturbances to society
due to the fact that equipment for it is installed out at sea.There are seven distinct types of marine energy: fixed-bottom
and floating wind turbines; tidal and river turbines and sea-current energy, wave energy, marine thermal energy (SWAC,
sea water heat pump, electricity production by ocean thermal energy), tidal power, biomass transformation, and osmotic
pressure. The Pole Mer Méditerranée cluster runs a collaborative R&D program dedicated to marine renewable energy.
The cluster is especially involved in the development of the floating offshore wind energy industrial sector. The Pole
Mer Méditerranée cluster is a member of France Energies Marines.
Key numbers:
A sustained R&D program with more than 200 certified projects with a research and development budget of €564 billion.
A 350-member network that includes 168 small and medium-sized businesses, 80 groups and large businesses, and
73 research and training organisations. The cluster was certified as an internationally-oriented competitiveness cluster
in the Sea category by the CIADT committee on 12 July 2005.
LOCATIONS
Provence-Alpes-Côte d’Azur.
TRAINING CENTRES
ACTIVITIES
MANUFACTURERS
The global marine economy has an annual turnover of $1.5 trillion. Of this, nearly $190 billion-worth of business did
not exist ten years ago.The new activity includes marine and underwater mineral extraction, marine energy, algae-based
biofuels, and aquaculture, etc. By 2020, these new fields are expected to generate nearly $450 billion in annual turnover.
Since its creation in 2005, the Mer Méditerranée Cluster has opted to focus on sustainable development and maritime
safety in six strategic fields: maritime safety and security, shipbuilding and sailing, energy resources and marine mining,
marine biological resources, coastal development and environment, and ports, infrastructure, and maritime transport.
ORGANIZATION
SUPPLIERS
229 chemin de la Farlède, 83500 La Seyne-sur-Mer
+33 (0)4 94 03 89 03
+33 (0)4 94 03 89 15
www.polemermediterranee.com [email protected]
BUSINESSES SELECTED
P
Competitiveness cluster
31
PARTNERS
PÔLE MER MEDITERRANÉE
PARTNERS
BUSINESSES SELECTED
R
RÉGION CHAMPAGNEARDENNE
Local authority and key partner in the economic development of the region
5 rue de Jéricho - CS 70441, 51037 Châlons-en-Champagne cedex
+33 (0) 326 708 577
+33 (0) 326 708 899
www.cr-champagne-ardenne.fr [email protected]
SUPPLIERS
MANUFACTURERS
TRAINING CENTRES
ORGANIZATION
The goal of the policy adopted by the Champagne-Ardenne region is to boost the economic appeal of the region and
create an environment conducive to the development of the companies. The region has developed tools adapted to
the local conditions to sustain the regional economy, consolidate its quality business hosting environment, and run
its Centres of Excellence, including the wind power sector. The region provides support to strategic projects and helps
French and international investors relocate to the area.
ACTIVITIES
Since 2002, Champagne-Ardenne has been a popular area for the installation of wind turbines, thanks to its abundant
wind resources and the vast open spaces available.
With more than 1,264 MW of rated power, Champagne-Ardenne is now France’s leading region for wind power, with
60 wind farms and 629 wind turbines. Businesses specialising in wind power development will find huge growth
potential (with a goal of 2,870 MW by 2020) and a favourable public policy formalised in a regional wind energy
plan approved in 2012.
Relocating companies will find competitive relocation costs, a strategic location in the heart of one of the most promising
areas of France, and an emerging market in wind turbine maintenance and repowering. More than 50% of rated power
in France is located within a radius of 300 km around Champagne-Ardenne and benefits from easy access to wind
farms in the Benelux zone. Champagne-Ardenne will be one of the first regions concerned by repowering and thus
by the development of an industry based around deconstructing and the management of components’ end-of-life.
Many companies in Champagne-Ardenne are involved in subcontracting for the wind power industry and are able to
produce the enormous, highly-complex equipment. This hotbed of companies offers great opportunities for European
prime contractors to diversify their suppliers.
Finally, training opportunities also meet current wind power industry needs with in particular since 2006, the first
training course in France recognised by the profession and leading to the BZEE certificate.
LOCATIONS
Located in Châlons-en-Champagne, the Economic Development Department is available to wind farm developers,
equipment manufacturers and maintenance companies in the wind power sector.
32
PARTNERS
UBIFRANCE
ORGANIZATION
33
SUPPLIERS
MANUFACTURERS
UBIFRANCE, the French Agency for International Business Development, is an executive agency of the French government
placed under the supervision of the Minister for Economic Affairs and Finance, the Minister with responsibility for
Foreign Trade and the Directorate General of the Treasury.
UBIFRANCE is the France’s export-support agency supported by a worldwide network.
In France:
• International Chargés d’Affaires (ICA) based in the Regional Departments of Bpifrance
• Regional Delegates based in the Regional Chambers of Commerce and Industry (CCI)
• Business specialists: sectoral, legal, regulatory…
Worldwide:
• 80 UBIFRANCE offices in 70 countries : also organised in sectors of activity, they are the gateways for French-based
SMEs to export markets
1,400 multicultural UBIFRANCE staff worldwide, dedicated to assisting French-based SMEs in their export drive
• Exclusive partners (CCIFE) in those countries in which UBIFRANCE does not have its own local office
TRAINING CENTRES
77 boulevard Saint-Jacques, 75014 Paris
+33 (0)1 40 73 32 70
+33 (0)1 40 73 30 27
www.ubifrance.fr [email protected]
BUSINESSES SELECTED
U
PARTNERS
WIND FOR FUTURE
MANUFACTURERS
TRAINING CENTRES
BUSINESSES SELECTED
W
8 rue du 19 Mars 1962, 21600 Longvic +33 (0)3 80 39 43 65
www.windforfuture.com [email protected]
ORGANIZATION
Wind for Future (W4F) has 70 members, including over 50 wind power companies in Burgundy, Franche-Comté, and
the Centre Est areas of France.The group was founded in September 2010 by companies who wanted to work together
to promote themselves in France and abroad. It offers a wide range of subcontractors and partners in France working
along the entire value chain, including: • Industrial manufacturers and processors of wind farm components of all sizes
• Energy operation and wind farm management companies • Engineering, electrical connection, and building and
public works companies involved in the installation of wind farms in Northeast France • Audit and consulting firms,
engineering firms, and maintenance companies. Our mission is to: • Foster business development and help prime
manufacturers to source cluster members • Promote the industry • Better exploit trades and expertise, innovation,
and employee training needs • Develop collaborative programs and projects in France and abroad.
W4F endorses the Windustry approach to encourage the emergence of the French wind power industry.
ACTIVITIES
The W4F cluster is a government-approved business cluster (DATAR) supported by the Burgundy region and by Europe
(FEDER). W4F is a network consisting mostly of small to medium-sized businesses in a single region motivated by
a common strategy of shared programs and services that define W4F. W4F was the only 100% wind power cluster
to be selected. The operations team is composed of an executive officer and an innovation programme manager.
Wind for Future is divided into four committees: innovation, training, attractiveness/promotion, and energy/climate/regions.
• Communication tools: Own logo and identity; brochure with a list of all members; a website (www.windforfuture.
com) detailing the cluster’s activities, history, members (with each member’s activities shown in a template and a link
to the member’s website), upcoming programmes, innovative projects etc.; and a bimonthly newsletter
• Training: With the help of the UIMM, the employment agency and the Burgundy Region, Wind For Future runs a
training programme leading to a qualification where job-seekers can become wind farm maintenance technicians.
Wind For Future also reinforces training in industry trades (welders, machining specialists, electrical mechanics) and
adapts training to new trades (wind farm project managers, etc.). A training centre dedicated to initial training (BZEE
certified) and ongoing training in onshore wind energy in Central and Eastern France is being built in Dijon
• Innovation: Promote the setting up of innovative programmes. A dozen collaborative projects are currently being
processed. Wind for Future works alongside the Spares in Motion platform to aid its development in France
• Collective goals (Attractiveness/Promotion Committee): The second National Wind Power Symposium (18-19
October 2011 in Dijon), organised by the Syndicat des Énergies Renouvelables (SER) and by Wind Energy France
(FEE), and the first wind power trades forum. Cluster members were grouped in the same hall. EWEA 2011 Brussels,
2012 Copenhagen, 2013 Vienna, 2014 Barcelona, overseeing the EWEA Offshore trade show in 2011 in Amsterdam
and in Frankfurt in 2013. Presence of the cluster on a stand at Windustry business meetings (Amiens in 2011, Nantes
in 2012, Le Havre in 2013)
• Energy/Climate/Regions: Contributions to the Burgundy Regional Plan, with a goal of 1,500 MW by 2020.
SUPPLIERS
LOCATIONS
Burgundy, Franche-Comté, and Center-East of France.
34
BUSINESSES
SELECTED TO
BE PART OF THE
WINDUSTRY
FRANCE
PROJECT
PARTNERS
BUSINESSES SELECTED
AETE ENERGIE
Cathodic Protection
32 rue des Prunus, 76290 Fontaine La Mallet / Le Havre
+33 (0)6 48 55 96 80
+33 (0)2 35 13 97 68
www.aete-energie.fr [email protected]
A
AETE ENERGIE is an integrator of cathodic protection solutions in the offshore sector (wind farms, marine and ports,
and oil and gas).
AETE ENERGIE offers environmentally-friendly cathodic protection systems.
ACTIVITIES
AETE ENERGIE is specialised in impressed current systems with MMO titanium anodes and protects submerged
equipment internally and externally using a monitoring system.
LOCATIONS
AETE ENERGIE’s offices are located close to Le Havre, near to prime contractors.
SUPPLIERS
MANUFACTURERS
TRAINING CENTRES
ORGANIZATION
36
PARTNERS
BUSINESSES SELECTED
BESNÉ MÉCANIQUE DE
PRÉCISION
Manufacture of large mechanical parts - Design and manufacture of mechanical
systems (industrial processes).
ZA La Harrois, 44160 Besne
+33 (0)2 40 17 33 30
+33 (0)2 40 17 33 31
www.elyps.fr [email protected]
ORGANIZATION
Besné Mécanique de Précision works in the following trades: design, mechanised welding, small- and large-capacity
machining (up to 13,000 x 4,000 x 2,000 with 5-axis milling) and assembly (in-house or on-site).
We work in the aviation, defence and energy sectors.
MANUFACTURERS
ACTIVITIES
TRAINING CENTRES
B
Manufacture of mechanical parts.
LOCATIONS
37
SUPPLIERS
Pays de la Loire.
PARTNERS
BUSINESSES SELECTED
DIALOG
Industrial logistics - Construction support
Siège social : La Heuperie ; Ets principal : Vallée de Quincampoix, 50000
50130 Saint-Lo ; Cherbourg Octeville
+33 (0)2 33 23 67 67
+33 (0)2 33 23 67 60
www.dialogsas.com [email protected]
TRAINING CENTRES
D
ORGANIZATION
DIALOG has 3 logistics platforms: Cherbourg, Mézidon-Canon Sotteville-lès-Rouen. Cherbourg has specific means
of handling forklifts 16 and 28T, truck loader cranes, tractor capacity 250T. In terms of transportation, DIALOG has
permissions 1st and 2nd category exceptional transports. The building of Cherbourg (10,000 m² covered. 35,000 m²
site) is secure and heated.The interior of Cherbourg has a dedicated workshop in industrial packaging and containment
area and a RCC-M (EDF certification). DIALOG is approved by the SEILA.
MANUFACTURERS
ACTIVITIES
DIALOG offers customers storage services, packaging, packaging and containment, handling and transport. We assist
our principals in the assembly and pre-assembly equipment. Our staff is trained, warehousemen, stevedores, chief
operating, truck drivers, elevated platforms, bridge operators slingers.... This staff has already intervened on industrial
and nuclear sites.
LOCATIONS
SUPPLIERS
Cherbourg Octeville (50130) - Sotteville-lès-Rouen (76) et Mézidon Canon (14).
38
PARTNERS
BUSINESSES SELECTED
FERRY CAPITAIN
SUBSIDIARY OF GROUPE CIF DE BUSSY-
Cast iron - Steel - Mechanised welding - Power transmission equipment
Usines de Bussy - BP 33, 52300 Joinville
+33 (0)3 25 94 04 24
+33 (0)3 25 94 35 07
www.ferrycapitain.fr [email protected]
FERRY-CAPITAIN currently has 430 employees, including 15 engineers, with an average age of 42. The site is located
in Joinville in Haute-Marne, 250 km east of Paris. In 2011, FERRY-CAPITAIN invoiced a total of €85 million, 75% of
which came from exports.
ACTIVITIES
FERRY-CAPITAIN specialises in the manufacture of large, mechanical assemblies, machining completed, for capital
equipment. The company’s target markets include grinding in mineral processing, the cement industry, the energy
sector (including wind energy), the steel industry, and large-scale mechanical engineering. It has large iron and steel
foundries (up to 70 tonnes) and a machining and cutting shop for large-scale gears (up to 14 metres in diameter).
FERRY-CAPITAIN produces wheel hubs, blade bases, covers, and hollow shafts, machining finished, for various wind
farm builders.
Key numbers: 430 employees. €85 million in turnover, 75% of which came from exports. Maximum weight of finished
parts from the foundry is 110 tonnes in spheroidal graphite cast iron and 80 tonnes in steel.
MANUFACTURERS
ORGANIZATION
TRAINING CENTRES
F
Champagne-Ardenne, Nord-Pas de Calais.
39
SUPPLIERS
LOCATIONS
PARTNERS
BUSINESSES SELECTED
FIXATOR
Design and manufacture of working-at-height access solutions for wind turbines,
including suspended blade and mast access platforms, service lifts, and laddermounted climb assist systems
Parc d’activités 8 rue du Bois Rinier - BP 10041, 49181 Saint-Barthélémy d’Anjou
+33 (0)2 41 31 17 00
+33 (0)2 41 31 17 10
www.fixator.com o.coutable@fixator.com
MANUFACTURERS
TRAINING CENTRES
F
ORGANIZATION
For more than 80 years, Fixator has been designing and manufacturing winches and suspended platforms to lift personnel
and equipment. Our teams of engineers and technicians have the skills and expertise to provide innovative solutions
that satisfy the most demanding requirements with regard to working at great height. All motorised suspended wind
turbine platforms are designed in accordance with machine directive 2006/42/EC and approved by a notified body.
All Fixator services are performed according to ISO 9001, version 2008, and are certified by the LRQA.
ACTIVITIES
Fixator designs and manufactures motorised suspended platforms to access blades and wind turbine masts. Fixator
also designs internal access systems such as service lifts and ladder-mounted climbing aids.
LOCATIONS
SUPPLIERS
Pays de la Loire.
40
PARTNERS
BUSINESSES SELECTED
FMGC
SUBSIDIARY OF FARINIA GROUP-
Manufacture ballasts in grey cast iron
Z.I. de Soudan, Hochepie, 44110 Soudan
+33 (0)2 40 28 50 73
www.fmgc.fr [email protected]
Farinia group includes different companies in foundry and forge. The BPI, a public funding company, is shareholder of
the group. FMGC is a foundry which generates a turnover of 70,7 M€ with 326 employees. Company has a production
capacity of 110 000 t/years of grey cast iron for parts between 500 kg to 25 t.
ACTIVITIES
Located in west of France, FMGC makes design, realizes and develops ballasting solutions in grey cast iron for cranes
and publics works equipments.
For 3 years, the company has launched a diversification of its activity towards the market of Marine Renewable Energy,
especially for wind power onshore and offshore but also for tidal and wave power.
Aware of needs of the sector concerning factory of complex mechanical parts, that french foundries are not able
to produce ; with a wealth of investment and technologic ongoing program. FMGC positions as a leading player to
supply and develop the foundry sector.
MANUFACTURERS
ORGANIZATION
TRAINING CENTRES
F
41
SUPPLIERS
Loire-Atlantique, at less than one hour from Atlantic Coasts.
We are thinking about opportunities to build a new foundry in dockside to meet all needs of Marine Renewable Energy
sector as a whole.
LOCATIONS
PARTNERS
BUSINESSES SELECTED
FOURÉ LAGADEC SARL
SUBSIDIARY OF FOURE LAGADEC SA-
Industrial Maintenance and Boilermaking
164 boulevard de Graville, 76600 Le Havre
+33 (0)2 35 25 59 99
+33 (0)2 35 25 20 85
www.fourelagadec.com [email protected]
TRAINING CENTRES
F
ORGANIZATION
The Fouré Lagadec company, based in Le Havre harbor, build boiler works and is ready to provide towers, foundations
and steel structure.
During the Group history, we have acquired an expertise in the Energy and Marine areas and we have assimilated a
wide know-how and technical competencies in the industrial maintenance, in the pressure vessel manufacturing, in
the electrical motors and the marine engineering.
SUPPLIERS
MANUFACTURERS
ACTIVITIES
Currently, we develop those essential features from the Wind Energy:
• Steel Structures (transition pieces – nodes – towers…)
• Conception and manufacturing of special equipments for cabling vessels
• Maintenance services
LOCATIONS
We own multiple technical resources dedicated to the industry.
Our plant in Le Havre has 30 000 m² workshop area, a 250 T lifting capacity and an in-house control and mechanical
test laboratory.
42
PARTNERS
BUSINESSES SELECTED
PAUMELLE
Boilermaking, Sheet metal working, Mechanic,
Metallic structure building
2 rue de l’abbaye, 76210 Gruchet le Valasse
+33 (0)2 35 31 07 82
+33 (0)2 35 38 80 13
www.paumelle.com [email protected]
P
Paumelle is a 50 years old company specialized in all aspects of metal working:
• Mechanic – Industrial maintenance
• Machining
• Metallic structure building (qualibat 4412 – 4421)
• Sheet metal working
• Boiler construction / mechanized welding
• Renovation of water mills and hydroelectric power stations
ACTIVITIES
Our goal is to develop our business in the wind power industry.
LOCATIONS
43
SUPPLIERS
We are located at Gruchet le Valasse in Normandy, close to Le Havre, Fécamp, the A29 motorway, the Seine river and
the sea.
MANUFACTURERS
TRAINING CENTRES
ORGANIZATION
PARTNERS
BUSINESSES SELECTED
PLASTIMA COMPOSITES
SUBSIDIARY OF FA2P-
Manufacture of composite parts
ZA de la Maladrerie, 53240 Andouille
+33 (0) 243 697 014
+33 (0) 243 687 374
www.plastima.fr [email protected]
TRAINING CENTRES
P
ORGANIZATION
SAS (simplified private limited company) with a capital of €150,000. Eighty employees. Plastima Composites specialises
in the development and manufacture of composite parts for the building sector, boats, industrial bodywork, shipbuilding,
and more. Its engineering office is equipped with a 3D workstation and works closely with regional laboratories. The
office is available for any kind of design work and technical assistance.
Plastima Composites is an expert in the various open- and closed-mould manufacturing processes, such as RTM and
infusion. Its infrastructures enable it to manufacture all nacelle shroud parts and all other external fittings (platforms,
ladders, etc.) In addition to moulding composite parts, we create fully-equipped subassemblies, fitted with metal,
electrical, and electronic parts.
LOCATIONS
Located near Laval, Plastima Composites owns a 12,000 m2 indoor industrial site on 30,000 m2 land which could
be extended. The company also has two other industrial sites: Polyecim in Saint-Nazaire and Yffiplast Composites
near Saint-Brieuc.
SUPPLIERS
MANUFACTURERS
ACTIVITIES
44
PARTNERS
BUSINESSES SELECTED
PRONAL SAS
Elastomer Engineering
Z.I Roubaix Est - Rue du Trieu du Quesnoy, 59115 Leers
+33 (0)3 20 99 75 29
+33 (0)3 20 99 75 20
www.pronal.com [email protected]
P
Pronal has a long & solid experience in the design of customized solutions to increase buoyancy during the installation
of 3,4 or 8 legged jackets and to provide sealing systems for the annulus grouting operations used in Oil&Gas and
Marine Energy projects. Pronal can provide offshore expertise in five main areas: installation of platforms, subsea
construction & maintenance, pipeline support & protection, salvage & decommissioning operations and the handling
of fluids topside & subsea.
LOCATIONS
TRAINING CENTRES
ACTIVITIES
45
SUPPLIERS
MANUFACTURERS
Pronal production site is located in Leers, close to the Belgium border.
PARTNERS
BUSINESSES SELECTED
SOLUTIONS COMPOSITES
Composite materials construction and engineering
2 rue du plateau - ZI les Gaudières, 37390 Mettray +33 (0)2 47 54 99 36
+33 (0)2 47 54 36 70 www.solutionscomposites.fr [email protected]
MANUFACTURERS
TRAINING CENTRES
S
ORGANIZATION
Technical components, advanced technology equipments and infrastructures “turnkey” ... our expertise in the field of
composites is recognized and translated by numerous references, innovative concepts, and numerous clients in the
constuction and industrial sector. 12 persons, 1,000 m2 of infrastructure and around 1Meuros of turn over. We control
the value chain of your projects during all stages:
RandD / Design / Engineering (Design and calculation) / Construction / Installation and deployment site / After-Sales
Service.
We are able to position ourselves on projects of all sizes, from simple to more ambitious with a strong network of
partners that beyond our borders. Our organization relies on entrepreneurial teams and qualified, very concerned
about the quality of our services throughout the development process
• A team RandD, skilled in the innovation process (applied research, laboratory / testing)
• A design and industrialization team
Conception of parts, components, and composite profiles. Degree in design technology Pultrusion, PULLWINDING,
centrifugation, infusion molding, RTM, SMC. (CAD SolidWorks)
Not to mention the design of plastic and metal parts, integration of components (equipment, information systems ...)
and design of structures.
Selection of appropriate production technologies, development of specific industrial processes, selection and
monitoring supplier quality
• A team of production / construction
Our companions, skilled, experienced and versatile mastered all the production technologies used in our company:
- Machining and assembly of composites
- Woodworking and metals
- construction in workshop and on-site deployment
ACTIVITIES
Helicopter deck or plateform,blade reinforcement profiles by pultrusion, nacelle cladding, wind turbine spinner, inside
tower or work plateform and access, ladder, technical parts
LOCATIONS
SUPPLIERS
Only one plant in center-western area of France.
46
PARTNERS
BUSINESSES SELECTED
ST INDUSTRIES
Machining of mechanical parts
ZA de Kerbiquet, 22140 Cavan
+33 (0)2 96 91 38 67
+33 (0)2 96 91 30 72
www.stindustries.fr [email protected]
S
ACTIVITIES
UCN Méca is ISO 9001-certified and guarantees Armor Précision Méca, which specialises in large-scale machining. After a
recent audit, the companies were pre-qualified by Areva for bidding on the “Ailes Marines” project in the Saint-Brieuc bay.
MANUFACTURERS
ST Industries is an operational holding company that owns shares in four Breton companies: Armor Précision Méca,
UCN Méca, Decarmor, and Breizh Usinage Services. They have an annual turnover of €11 billion, 115 employees, and
a capacity of 250,000 hours of numerical control per year. ST Industries offers a wide variety of services and products,
from prototypes to mass production, mechanical integration, repairs, maintenance, small and large parts, all types of
metal, titanium, engineered plastic and composites. UCN Méca and Breizh Usinage Services make highly-technical
small and medium-sized parts with high added-value. The companies work mostly in the fields of oceanography, oil
exploration, telecoms applications, special laboratory machines and energy. Armor Précision Méca provides maintenance
services for regional industries, mechanised welding of subassemblies, and machining of large parts. Decarmor is
a bar turning company that works mostly with valves and water and gas regulation. The equipment consists of 25
machining centres, 31 numerical control lathes, 19 conventional lathes and 9 conventional milling machines, 5 MIG
and TIG welding stations, and wire and die-sinking electrical discharge machines.
TRAINING CENTRES
ORGANIZATION
47
SUPPLIERS
UCN Méca, Armor Précision Méca, and Decarmor are all located in Côtes-d’Armor. Breizh Usinage Services is located
in Finistère and has two workshops: one in Pleyben and one in Guipavas.
LOCATIONS
PARTNERS
BUSINESSES SELECTED
STO LOGISTIQUE
Service vessels for charter
32 bis rue d’Ault, 80130 Bethencourt-sur-Mer
+33 (0)3 22 61 34 38
[email protected]
S
Supply of service vessels to conduct studies, take measurements, provide assistance, transport technicians and small
freight, put up markers and buoys, and perform underwater work.
LOCATIONS
Head office located in Picardy, the vessel can operate along the entire coast of France. Operations from Calais to
Saint-Nazaire since 2008. We also carry out operations and work in the Mediterranean Sea.
SUPPLIERS
MANUFACTURERS
TRAINING CENTRES
ACTIVITIES
48
PARTNERS
BUSINESSES SELECTED
TE2M
Design and manufacture of magnetising equipment for
permanent magnets, devices for magnetic measurements,
magnetic systems, and magnetic mechanisms (couplings,
electromagnetic suction cups, gears, etc.)
600 rue Alain Colas - Z.I.Portuaire, 29200 Brest
+33 (0)2 98 02 22 36
+33 (0)2 98 42 16 73
www.te2m.com [email protected] [email protected]
ORGANIZATION
Design: Magnets/mechanical assemblies/electromagnets, machining, milling, grinding, 4- and 5-axis machining centre,
surface treatment, painting, and fully integrated manufacture of our equipment.
TRAINING CENTRES
T
• Magnetising alternator magnets - Before or after assembly (depending on the configuration)
• Remagnetisation of demagnetised permanent magnets (disassembled or on alternators, depending on the configuration)
• Magnetic measurements of magnetic circuits or magnets (flux, field, induction, etc.)
LOCATIONS
49
SUPPLIERS
Brittany.
MANUFACTURERS
ACTIVITIES
:,1'/$% $ 75$,1,1* '(9,&(
'(',&$7(' 72 :,1' -2%6 &5($7(' %<
3,&$5',(5(*,21
:LQG/DEWKLVLV
$SDUWQHUVKLSZLWKWKH
QHWZRUNDFWRUV
$QRSSRUWXQLW\IRUHYHU\ERG\
LQWHUHVWHGLQZLQGWXUELQH
PDLQWHQDQFH
&217$&7
ZLQGODE#FUSLFDUGLHIU
;DYLHU5HQRX[5pJLRQ3LFDUGLH
$QRYHUDOOWUDLQLQJNLW
TRAINING
CENTRES FOR
WIND TURBINE
MAINTENANCE
TECHNICIANS
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
C.E.P.S. (Centre d’Etude et de
Pratique de la Survie)
Centre for Maritime Safety Training in Lorient
37 avenue des Colverts, 44380 Pornichet
+33 (0)2 40 61 32 08
+33 (0)2 40 61 61 08
www.ceps-survie.com [email protected]
ACTIVITIES
Certified by BZEE, ISO 9001, and 29990 LRQA.
LOCATIONS
Lorient (Morbihan).
SUPPLIERS
MANUFACTURERS
C
52
PARTNERS
72 avenue de l’Europe, 86500 Montmorillon
+33 (0)5 49 83 06 16
+33 (0)5 49 91 57 24
www.raoul-mortier.fr [email protected]
ORGANIZATION
The training site at the La Barre industrial zone in Montmorillon features a 30-metre training tower, a 150 m2 workshop
with a two-and-a-half-tonne bridge crane and three nacelles. At the Lycée Pro Raoul Mortier, students can learn how
to repair wind turbine blades in a 60 m2 composite workshop.
ACTIVITIES
The Lycée provides training for wind farm maintenance technicians and issues BZEE certificates. The training course
lasts 16 weeks, plus eight weeks’ training at a company, and one week of exams. Students at least 18 years old with
a BTS (technician certificate) or Bac Pro (vocational baccalaureate) are hired in electronics or maintenance fields.
The course can accept up to 12 students.
LOCATIONS
53
SUPPLIERS
Montmorillon is a municipality in the Vienne department of France. It is close to large cities, including Poitiers (44 km),
Châtellerault (58 km), and Limoges (82 km).
L
MANUFACTURERS
Vocational training, BZEE certification
TRAINING CENTRES
BUSINESSES SELECTED
LP RAOUL MORTIER (Lycée des
métiers des énergies et des
services aux entreprises)
PARTNERS
LYCEE DHUODA
TRAINING CENTRES
BUSINESSES SELECTED
FCIL:Training course for wind farm maintenance technicians*
ORGANIZATION
The institute offers post-Baccalauréat training to become a wind farm maintenance technician. Training takes place
on high-powered equipment. Learning modules meet the standards of professionals seeking qualified labour. At the
end of training, certified students will have the skills and knowledge to work on a wind turbine. For more information,
go to www.eolien-dhuoda.com.
ACTIVITIES
Training as a school student or a job seeker, as an employee or on study leave.
Key numbers:
Training lasts six months (26 weeks, including eight at a company). Two sessions are held each year (a September
and a January session, each with 15 places).
LOCATIONS
MANUFACTURERS
L
17 rue Dhuoda - BP 17155, 30913 Nîmes cedex
+33 (0)4 66 04 85 82
+33 (0)4 66 04 85 77
www.lycee-dhuoda-nimes.com [email protected]
SUPPLIERS
*Training that meets the criteria of the Format’eree Charter.
54
PARTNERS
LYCEE FRANCOIS BAZIN
BUSINESSES SELECTED
Training
145 avenue Charles de Gaulle, 8013 Charleville-Mézières
+33 (0)3 24 56 81 56
+33 (0)3 24 56 81 57
www.lyceebazin.net [email protected]
ORGANIZATION
ACTIVITIES
Wind farm maintenance technician training leading to a BZEE professional qualification certificate recognised by
industry professionals. Mixed initial training with GRETA for 20 technicians per year.Training partnership with Technifutur
in Belgium: 16 technicians trained each year. Training partnership with the IUT in Châlons-en-Champagne.
LOCATIONS
TRAINING CENTRES
Lycée des Métiers des Technologies Industrielles et de l’Énergie François Bazin. (François Bazin college of industrial
technology and energy trades).
L
55
SUPPLIERS
MANUFACTURERS
Champagne-Ardenne.
PARTNERS
WINDLAB
PICARDY REGIONAL COUNCIL-
TRAINING CENTRES
BUSINESSES SELECTED
Picardy regional platform
ORGANIZATION
WindLAB is equiped by:
• workshop : 3 nacelles, gantry, painting room, advanced electrical materials, measuring instruments
• 30 metres training tower,
• technical class room.
ACTIVITIES
WindLAB area propose 3 main activities :
• Windindustry promotion, professional guidance,
• Training for maintenance technician for jobseekers, students and employees,
• Provision of technical equipments for partners’ R&D projects.
LOCATIONS
Amiens.
SUPPLIERS
MANUFACTURERS
W
11 mail Albert 1er - BP 2616, 80026 Amiens cedex 1
+33 (0)3 22 97 38 83
+33 (0)3 22 97 35 45
www.picardie.fr Virginie Renault : [email protected]
56
WIND TURBINE
MANUFACTURERS
The Windustry directory
was printed on PEFC certified
paper
PEFC (Programme for the Endorsement
of Forest Certification schemes)
is to show that wood comes from sustainably managed fo
f rests
based on the Helsinki criteria.
• Preservation of the fo
f rest heritage and contribution to global
carbon cycles.
• Maintenance of healthy fo
f rest ecosystems.
• Maintenance and encouragement of fo
f rest production systems.
• Improved biodiversity.
• Improved systems for
f protecting fo
f rest management, especially
soil and water.
• Maintenance of socio-economic conditions.
Like fo
f r the FSC, our role as a processor is to manage the traceability
of paper,
r and the conditions for using the logo are subject to
regulations.
FSC (Forest Stewardship Council)
This international non-governmental organization was created in
1993 under the impetus of associations like Friends of the Earth,
Greenpeace and the WWF. Its aim is to certify that wood comes
from well-managed fo
f rests in line with replanting and biodiversity
objective is to organize thorough traceability of matter used. To
T
that we can only use the FSC logo on documents we produce if
PARTNERS
BUSINESSES SELECTED
ALIZEO
Wind turbine manufacturer
4 rue Saint Florentin, 75001 Paris
+33 (0)1 73 02 94 42
www.groupe-alizeo.com [email protected]
ACTIVITIES
Designer and manufacturer of 1 MW, retractable wind turbines. Developer and operator of wind farms inside and
outside of cyclone zones:
• Civil engineering structures that can be fully dismantled with ease
• Very small footprint, less than 200 m2
• Technology based on counterweight systems and equipped with hydraulic jacks
• Use of standard equipment of proven reliability available on the market
• 1 MW synchronous wind generators with direct drive or Multibrid epicyclic drive train and permanent magnets
• Large-diameter, three-blade rotors for low to medium winds
• Retracts into the earth in less than an hour in the event of a cyclone
• Rises and restarts production in less than an hour
• Withstands sustained winds of 150 kph when vertical
• Withstands sustained winds of 250 kph when retracted.
A
LOCATIONS
59
SUPPLIERS
Our plants and subsidiaries:
ALIZEO Industrie in Lons le Saunier (Jura)
ALIZEO ROUSSILLON in Perpignan (Pyrénées-Orientales)
ALIZEO MASCAREIGNES in Réunion
ALIZEO CARAÏBES in Martinique
SOFTWIND subsidiary manufacturing wind generators.
MANUFACTURERS
SA (Limited liability company) with a capital of €1,375,669.01 • Paris Trade and Companies Register 495 311 391
TRAINING CENTRES
ORGANIZATION
PARTNERS
BUSINESSES SELECTED
ALSTOM
Energy sector
3 avenue André Malraux, 92307 Levallois-Perret
+33 (0)1 41 49 20 00
www.alstom.com
MANUFACTURERS
TRAINING CENTRES
ORGANIZATION
SUPPLIERS
A
Alstom is a world leader in infrastructure used to produce and transmit electricity and in the rail transport industry.
The Group raises the bar with its innovative, environmentally-friendly technologies.
With the largest portfolio of products on the market, Alstom covers all energy sources, from gas to wind power. Its clean
technologies generate enough electricity to power 1.2 billion households around the world.
ACTIVITIES
With 30 years of experience in wind power, Alstom provides global solutions, covering the development, design and
installation of wind farms to supplying and maintaining wind turbines. Alstom offers a wide range of onshore wind
turbines with up to 3 MW of nominal power. Its 2,500 wind turbines have a total power of more than 4,500 MW.
Alstom, a major player in the offshore wind industry, installed the world’s largest offshore wind turbine, the Haliade™
150-6 MW, off the Belgian coast.This new generation 6 MW turbine incorporates proven Alstom Pure Torque® technology,
which guarantees reliability of the transmission line. Each Haliade™ 150-6 MW unit powers the equivalent of 5,000
homes. These high-tech, innovative direct drive offshore wind turbines stand up to all offshore conditions and supply
electricity at competitive prices.
With its Haliade™ 150-6 MW wind turbine, Alstom is the exclusive provider for the consortium led by EDF EN. Alstom
was selected for the three projects it tendered for at the Saint-Nazaire, Courseulles-sur-Mer, and Fécamp sites, for a
total of about 240 wind turbines.
An industrial plan allowing the creation of a sector for outstanding French industries in offshore wind energy is
taking shape, in particular with the installation of four plants at Saint-Nazaire and Cherbourg. This measure will be
accompanied by the opening of an Alstom engineering and R&D centre dedicated to marine renewable energy—the
first of its kind in France.
LOCATIONS
Alstom’s head office is located in Levallois-Perret.
Its engineering centre is located in Nantes.
Its wind power operations headquarters is located in Barcelona, Spain.
60
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
X
LEADING THE NEW GENERATION OF LARGE
HIGH-EFFICIENCY WIND TURBINES
With its 122m rotor diameter and swept area of 11,700 m2,
Alstom’s ECO 122 offers a unique combination of high power and
high capacity factor in medium and low wind regions worldwide.
The new ECO 122 range available with a nominal output of 2,7 MW
and now 3 MW (offering up to +6% additional yield vs. the ECO 122
2.7MW), is the latest evolution of Alstom’s proven ECO 100 platform
and the result of more than 30 years of experience in wind turbine
design.
www.alstom.com
61
SUPPLIERS
ECO 122 - NEW 3 MW UPGRADE
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SUPPLIERS
A
AREVA - BU OFFSHORE WIND
SUBSIDIARY OF AREVA-
Wind turbine fabrication and maintenance
1 place Jean Millier, 92084 Paris La Défense cedex
+33 (0)1 34 96 30 00
+33 (0)1 34 96 35 40
www.areva.com [email protected]
ORGANIZATION
AREVA supplies advanced technology solutions for power generation with less carbon. Its expertise and unwavering
insistence on safety, security, transparency and ethics are setting the standard, and its responsible development is
anchored in a process of continuous improvement.
Ranked first in the global nuclear power industry, AREVA’s unique integrated offering to utilities covers every stage of the
fuel cycle, nuclear reactor design and construction, and operating services. The group is also expanding in renewable
energies – wind, bioenergy, solar, energy storage – to become a European leader in this sector.
With these two major offers, AREVA’s 46,000 employees are helping to supply ever safer, cleaner and more economical
energy to the greatest number of people.
ACTIVITIES
AREVA designs, manufactures, assembles and commissions high-output wind turbines specially designed for the
offshore market. The 5 MW AREVA M5000 have proven their performance at sea on the alpha ventus offshore wind
farm, in operation since 2009. Thanks to its proven technology and its industrial basis the group was selected for
2 major projects, which installation was launched during summer 2013. By 2014, 120 turbines representing 600 MW
will be installed at sea.
The group also developed the next generation turbine, the AREVA 8 MW, based on its proven platform.
For the offshore wind farms in France, Belgium and Southern UK, the AREVA 5 and 8 MW turbines will be produced in
the group’s factories to be settled in Le Havre ; an opportunity for the French suppliers to take part into the offshore
wind industry built by AREVA.
LOCATIONS
Île-de-France, Upper Normandy.
62
MANUFACTURERS
712 054 923 RCS NANTERRE
–
TRAINING
CENTRES
– Crédit photo
: Jan Oelker
BUSINESSES SELECTED
PARTNERS
L’AVENIR POUR
ÉNERGIE,
C’EST INSTALLER
120 ÉOLIENNES
EN MER DU NORD
D’ICI À 2014.
Chez AREVA, les défis énergétiques de demain sont une
préoccupation de tous les jours. En mobilisant nos expertises pour
porter les énergies renouvelables au plus haut niveau de maturité
technologique et de compétitivité, nous nous donnons les moyens
de figurer au premier rang des acteurs de la transition énergétique.
C’est aussi ça, avoir l’avenir pour énergie. areva.com
L’énergie est notre avenir, économisons-la !
63
SUPPLIERS
X
SUPPLIERS
© ENERTRAG
X
64
MANUFACTURERS
TRAINING CENTRES
BUSINESSES SELECTED
PARTNERS
PARTNERS
SUBSIDIARY OF OVH-
Manufacturer of high power wind turbines
Parc d’Activités Europescaut - 1 rue de l’Europe, 59410 Anzin +33 (0)3 27 32 07 98
+33 (0)3 27 31 60 41 www.ddiswt.com [email protected]
BUSINESSES SELECTED
DDIS
LOCATIONS
800kW Wind turbine prototype: DDIS60 in Onnaing (North of France)
First wind turbine site equipped with 8 DDIS60 (800 kW) in Ortoncourt (East of France)
65
MANUFACTURERS
DDIS designs, certifies and manufactures wind turbines offering several advantages :
• Intrinsic reliability using simple and modular components i.e each module stator is impregnated under vacuum
and pressure
• Compactness through a clever and modular design
• Significant weight reduction thanks to the axial flux and multiphase technology
• Fully compliant with the new grid regulations (“grid code”) thanks to a permanent magnet machine and a full power
converter (DC bus controlled by a chopper)
• Capable of operating easily under withdrawal mode and /or enhanced performance through the design of the
multiphase machine
• Easily switchable to the multi-megawatt range without costly investments in production
• Readily transportable due to its modular design
The primary target of DDIS is the wind energy sector, a fast growing market in which DDIS’s technology can bring real
competitive advantages:no gearbox, lower total head mass, high grid compatibility.
Using an innovating technology protected by international patents, DDIS has developed a three-bladed wind turbine
equipped with a direct drive, permanent magnet, multiple pole, multiphase synchronous axial flux generator.
As the same time as the marketing of DDIS60, the DDIS target is double :
• Impose its technology on the offshore market and develop wind turbine multi-megawatt by capitalizing on the
technological developments carried out on the DDIS60.
• Sell Manufacturing Licenses of its Technology
D
ACTIVITIES
SUPPLIERS
DDIS is an electrical engineering company founded in may 2008.
Prizewinner of the “Concours National d’Aide à la Création d’Entreprise en Technologies Innovantes”, DDIS, Young
Innovative Company, federated many supports among which Oseo, the Ministry of Research, Europe...
TRAINING CENTRES
ORGANIZATION
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
ENERCON GMBH
GMBH : construction and sale of wind turbines
ESF : maintenance and after-sales service
GmbH : Z.I N°2 - Impasse du Pré Bernot
ESF: 9001 rue du Tourteret, 60880 Le Meux
GmbH : +33 (0)3 44 83 67 20 ESF: +33 (0)3 44 37 35 10
GmbH : +33 (0)3 44 83 67 29
ESF: +33 (0)3 44 37 35 20
www.enercon.fr [email protected]
ORGANIZATION
Founded in 1984, Enercon GmbH is a German constructor of wind turbines with branches and subsidiaries around
the world.
MANUFACTURERS
ACTIVITIES
LOCATIONS
Picardy.
SUPPLIERS
E
Enercon designs, manufactures, and sells wind turbines of varying powers, from 330kW to 7.5 MW. Its unique
technology without a gearbox reduces noise levels and facilitates maintenance operations. Today, the company owns
nearly 40% of all patents in the wind power industry. There are currently more than 19,000 Enercon wind turbines
in operation in over 39 countries, for a total of more than 26,000 MW of rated power. The company employs nearly
13,000 people around the world.
66
PARTNERS
BUSINESSES SELECTED
GAMESA EOLICA
Construction, sale, and maintenance of wind turbines
97 allée Borodine - Cedre 3, 69800 Saint-Priest
+33 (0)4 72 79 49 39
www.gamesacorp.com [email protected]
LOCATIONS
Île-de-France, Nord, Upper Normandy, Pays de la Loire, Aquitaine, Franche-Comté, Rhône-Alpes, Provence-Alpes-Côte
d’Azur, Poitou-Charentes, and Limousin.
Île-de-France Office: 118-122 avenue de France, 75013 Paris • [email protected]
67
MANUFACTURERS
Gamesa offers onshore wind generators with the following output:
• 850 kW: G52 and G58 models
• 2.0 MW: G80, G87, G90, G97 and G114 models
• 2.5 MW: G114 models
• 4.5-5 MW: G128 and G132 models.
Gamesa also designs offshore wind generators with 5 MW and 7 MW of output. Its first operational prototype appeared
in late 2013.
Gamesa provides wind generator maintenance services, ranging from simple remote management to full contracts
with standard, 15-year terms. A new Life Extension program for wind generators is also available.
G
ACTIVITIES
SUPPLIERS
With an annual turnover of €2.7 billion worldwide, 2,600 MW of energy sold in 2012, 19 years of experience gained
on 28GW of rated power, and plants and offices around the world, Gamesa is a world leader in wind generator
construction (ranked 4th in the world for cumulative installed capacity in 2012, according to BTM Consult). Gamesa
also offers a wide range of services, in particular, it oversees maintenance for 19,800 MW around the world (including
600 MW in France at the end of 2013 out of 720 MW installed by GAMESA). Gamesa has invested in considerable R&D
resources (€150 million over three years) to reduce energy costs (20% by 2013 and 30% by 2015) by developing
more efficient wind generators.
The company has three entities which: (1) develop, produce, and sell wind generators; (2) maintain wind generators
throughout their service life and (3) develop wind farms.
TRAINING CENTRES
ORGANIZATION
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SUPPLIERS
G
GE WIND ENERGY
SUBSIDIARY OF GENERAL ELECTRIC-
Construction, sale, and maintenance of wind turbines
Tour Europlaza 29C3 - 20 avenue André Prothin, 92063 Paris La Défense cedex
+33 (0)1 41 97 56 33
+33 (0)1 41 97 56 56
www.ge-renewable-energy.com [email protected]
ORGANIZATION
GE Power & Water has more than 90,000 employees worldwide in the gas turbines, nuclear energy, water and process
technologies, and renewable energy sectors.
GE Power & Water is a leading world provider of energy solutions and related technology. The company has more than
9,500 employees in Europe. Its Belfort site in France has 1,000 employees and is a world centre of excellence. Belfort
is the only production site in France for medium- and high-power gas turbines. The Salzbergen location in Germany
is a centre of excellence in wind power.
ACTIVITIES
Today, GE Power & Water is considered one of the world leaders in wind power, with more than 18,000 wind turbines
already installed worldwide.
GE Energy designs and manufactures wind generators from 1.5 to 4.1 MW. It also offers a wide range of related services,
from project development (technical and financial assistance for project development) to wind farm maintenance
and operation.
Its range of 2.5-100/3.2-103 wind turbines is particularly adapted to the European market. They are based on
GE Energy’s experience in 1.5 MW technology and are the most widely-sold turbines in the world, with more than
16,000 units installed and in operation.
Since 2013, GE Energy has also been selling GE 2.5-120 wind turbines which are particularly suited to less windy
sites (class 3). This new turbine features the best load factor in its category.
All GE wind turbines offer very high annual outputs and serviceability and have more advanced network integration
technologies.
LOCATIONS
GE Energy Europe centre of excellence: Belfort
Sales office: Paris La Défense
Wind turbine maintenance bases: St-Omer (Pas-de-Calais), Lempdes (Haute-Loire), Nantes (Loire-Atlantique), and
Chalons-en-Champagne (Marne).
GE Energy has more than 3,000 employees in France, including 30 for wind power alone.
68
A developer of wind farm projects and a designer, manufacturer, and constructor of wind generators, Nordex SE is both
a veteran in the sector and a pioneer in the wind power industry. Founded in Denmark in 1985, the company was the
world’s first mass-producer of 250 kW, 1.5 MW, and 2.5 MW turbines. Since it was founded, the company has installed
over 4,800 wind generators around the world, for over 7,500 MW of rated power. With production units in Germany,
the United States, and China, and numerous subsidiaries worldwide (including France, the United Kingdom, Sweden,
Italy, and Spain), Nordex SE currently has almost 2,500 employees, of which 150 work in France.
ACTIVITIES
Divided into four main departments (Sales, Development, Project Management, and Maintenance), Nordex France
employees can handle the entire value chain for a wind farm project for their customers. Our clients receive the full benefit
of the Nordex SE group’s expertise in wind turbine design and manufacture, and are offered the most comprehensive
range of services on the market plus over 17 years of experience in executing turnkey projects in France. Nordex
has created a strong skills network that makes it a market leader: Complete development of projects, supply of wind
generators, execution of entire construction sites, and providing long-term maintenance of wind turbines and more.
In 2011, Nordex installed its 1,000th MW in the French market.
LOCATIONS
Through its subsidiary Nordex France SAS, the company has created 13 maintenance centres to provide some of the
highest availability rates on the market. Every day, 80 maintenance technicians perform crucial wind turbine inspection
and management services
69
BUSINESSES SELECTED
PARTNERS
ORGANIZATION
TRAINING CENTRES
1 rue de la Procession, 93217 La Plaine-Saint-Denis
+33 (0)1 55 93 43 43
+33 (0)1 55 93 43 40
www.nordex-online.com [email protected] [email protected]
MANUFACTURERS
Design, manufacture, sale, installation, and maintenance of wind turbines
N
SUBSIDIARY OF NORDEX ENERGY GMBH-
SUPPLIERS
NORDEX FRANCE
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
SENVION FRANCE SAS
SUBSIDIARY OF SENVION SE (FORMERLY REPOWER)-
Wind turbines development, manufacturing, sales, installation and maintenance
10 avenue de l’Arche - Immeuble Le Colisée - La Défense, 92419 Courbevoie cedex
+33 (0)1 41 38 93 93
+33 (0)1 41 38 93 94
www.senvion.com/fr [email protected]
ORGANIZATION
Senvion SE is one of the world’s leading manufacturers of onshore and offshore wind turbines. With more than 3,300
employees worldwide, the company can make use of the experience gained from the manufacture and installation of
more than 5,000 wind turbines (9.5 GW) around the world. Senvion is present in France since 2002. Today, Senvion
France SAS employs 180 people, of which 100 technicians in France.
MANUFACTURERS
ACTIVITIES
Wind turbines development, sales, manufacturing, installation, service and maintenance.
LOCATIONS
13 service bases in France: Champagne-Ardenne, Picardie, Nord-Pas-de-Calais, Poitou-Charentes, Normandie, Bretagne,
Languedoc-Roussillon and Centre. Senvion France SAS is headquartered in Paris La Défense.
SUPPLIERS
S
70
PARTNERS
Energy
9 boulevard Finot, 93527 Saint-Denis
+33 (0)1 49 22 94 08
+33 (0)1 49 22 94 00
www.siemens.fr fi[email protected]
ACTIVITIES
Secteur Energy is a world leader and major player in the French energy market, in particular with its comprehensive
range of products, services and solutions for renewable energy production and energy transmission.
A world leader in offshore wind energy with nearly 3.4 GW installed, Siemens Wind Power offers reliable, robust,
turbines based on advanced technology, particularly in the field of blade design (Siemens IntegralBlades®) and
power electronics (Siemens NetConverter®). Design, manufacture, installation, and maintenance: Siemens wind power
generators benefit from over 25 years of experience in onshore and offshore wind turbines.
Siemens Wind Power has a sound organisation in France, with a sales team offering the entire range of Siemens
wind turbines, a project team that closely manages execution phases, and specific maintenance teams for each site,
guaranteeing a high level of availability for the 302 MW already in operation in France and the 72 MW currently
being installed. Thanks to its skills centre, which has a staff of 120 employees and constructs substations in France
and abroad, Siemens Wind Power can provide a full range of turnkey solutions for offshore wind farms, including the
civil and electrical engineering.
LOCATIONS
MANUFACTURERS
SUBSIDIARY OF SIEMENS SAS-
TRAINING CENTRES
BUSINESSES SELECTED
SIEMENS WIND POWER
S
71
SUPPLIERS
Nord, Picardy, Tarn, and Brittany.
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SUPPLIERS
V
VESTAS FRANCE
Design, manufacture, sale, installation, and maintenance of onshore and offshore
wind turbines
Siège social : 55 impasse John Locke - Parc de l’aéroport - 34470 Pérols
Etablissement de Paris : Tour Opus 12 - La Défense 9
77 esplanade du Général De Gaulle - 92914 La Défense cedex,
Siège : + 33 (0)4 67 20 22 02 Paris : + 33 (0)1 55 67 97 00
Siège : + 33 (0)4 67 20 78 99
Paris : + 33 (0)1 47 74 73 88
www.vestas.fr [email protected]
ORGANIZATION
Vestas is a world leader in wind turbine production. For 30 years, the company has specialised in developing, manufacturing,
selling, installing, and maintaining onshore and offshore wind turbine systems that use wind to produce electricity.
At the end of June 2010, Vestas had delivered more than 41,400 wind turbines around the world generating over
60 million MWh per year–enough energy to power millions of households.
ACTIVITIES
Vestas France sells, installs, services, and maintains wind turbines in France. The company has been present in France
since 2000, opening its first sales and maintenance office in Pérols near Montpellier in 2002, before opening a new
office in Paris in 2009. Today, Vestas France has nearly 200 employees, and its staff has more than doubled in the
last three years. On 30 June 2010, Vestas France had more than 534 wind turbines in operation, for a total of more
than 1,000 MW of rated power.
Vestas France is ISO 9001 and OHSAS 18001 certified.
LOCATIONS
Besides its Montpellier and Paris locations, Vestas France has created 6 maintenance centres in Ardèche, Aveyron,
Côtes-d’Armor, Eure-et-Loir, Haute-Marne, and Pas-de-Calais. The company has signed technician training agreements
(e.g. Nîmes, with the support of the Languedoc-Roussillon authorities) and has created a Product Support department,
which includes all of its technical skills for its French clients.
72
PARTNERS
BUSINESSES SELECTED
VERGNET
World leader in Farwind wind turbines
12 rue des Châtaigniers, 45140 Ormes
+33 (0)2 38 52 35 60
+33 (0)2 38 52 35 83
www.vergnet.com [email protected]
ACTIVITIES
Vergnet is the only French manufacturer of wind turbines. For more than 20 years, it has specialised in electricity
production for the Farwind® market (for areas with reduced or cyclone infrastructure) and the Proxwind® market (for
decentralised production).Thanks to their unique technology, Vergnet’s 200 kW to 1 MW wind turbines can be retracted
to the ground for maintenance or in the event of cyclones. Vergnet also plays a major role in supplying water to rural
areas in emerging countries, providing more than 50 million people with drinking water. Vergnet offers villages a
complete range of services, from pumping water to transporting and storing it using products that are easy to install
and maintain. Vergnet also works in the photovoltaic power sector, mostly in Africa to operate pumps and provide
electricity to rural areas, and in professional applications in isolated regions where the cost of electricity generated
from oil is directly affected by the price of oil.
MANUFACTURERS
The Vergnet group was founded in 1989. It works in three main areas:
• WIND TURBINES, through Vergnet SA and its subsidiaries: Vergnet Caribbean, Vergnet Pacific and Vergnet Indian Ocean
• HYDRAULICS, through Vergnet Hydro for manual pumps
• PHOTOVOLTAIC POWER, through Photalia, to provide electricity in rural Africa.
TRAINING CENTRES
ORGANIZATION
V
LOCATIONS
73
SUPPLIERS
Centre.
Cabinet d’avocats indépendant et pluridisciplinaire
composé d’une quarantaine de personnes, CGR
Legal est engagé depuis près de quinze ans dans
le secteur des énergies renouvelables.
CGR Legal is an independent multispecialised law firm with forty staff. CGR Legal
has been involved in the renewable energy
sector for nearly fifteen years.
Ses équipes accompagnent les clients
(développeurs de projets, fabricants de turbines,
opérateurs électriques et fonds d’investissement) dans le développement et la sécurisation
de leurs projets industriels - en France comme
à l’étranger - ainsi que dans le cadre d’opérations
d’acquisition ou de cession de projets Energie.
Its teams accompany clients (project developers, turbine manufacturers, electricity operators and investment funds) in developing and
securing their industrial projects, both in
France and abroad, as well as in acquisitions
or disposals of Energy projects.
Offrant une expertise transversale reconnue,
CGR Legal intervient, notamment, en :
Offering renowned across-the-board
expertise, CGR Legal is notably involved in :
droit public des affaires, droit de l’urbanisme,
droit de l’environnement, droit électrique,
contentieux administratif ;
fusions-acquisitions, capital investissement,
financement, droit des sociétés ;
droit de l’immobilier, investissements
immobiliers, et construction ;
fiscalité ;
droit social ;
droit des contrats ;
contentieux d’affaires et industriels.
public commercial law, town planning law,
environmental law, electricity law, administrative litigation;
mergers and acquisitions, private equity,
financing, company law;
real estate law, investments, construction;
taxation;
employment law;
contract law; and
commercial and industrial litigation.
35 Bd des Capucines, 75002 Paris - T 33 (0) 1 53 45 40 00, F 33 (0) 1 53 45 40 10
cgrlegal.eu
WIND TURBINE
INSTALLATION
DEVELOPERS
AND OPERATORS
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
AILENERGIE CHAMPAGNE
ARDENNE
Wind farm development
19 avenue Charles de Gaulle - BP 53, 08300 Rethel cedex
+33 (0)3 24 38 70 10
+33 (0)3 24 39 65 92
ailenergie.com [email protected]
ORGANIZATION
Founded in 2003, AILENERGIE Champagne Ardenne is a ‘société anonyme’ (limited liability company) that develops
wind farms.
ACTIVITIES
LOCATIONS
Champagne-Ardenne
MANUFACTURERS
Development, construction, and operation of wind farms in Champagne-Ardenne.
SUPPLIERS
A
76
PARTNERS
BUSINESSES SELECTED
BAYWA R.E. FRANCE SAS
Development, financing, execution and operation of wind farm projects
50 ter rue de Malte, 75011 Paris
+33 (0)1 55 31 49 80
+33 (0)1 55 31 49 88
www.baywa-re.fr [email protected]
BayWa r.e. is a wholly-owned subsidiary of BayWa AG and concentrates on renewable energy. Created in 2009,
BayWa r.e. is a holding for several wind, solar, bioenergy, and geothermics companies. BayWa r.e. France SAS, a French
subsidiary of the company, is based in Paris.
ACTIVITIES
MANUFACTURERS
BayWa r.e. works in the field of wind and photovoltaic energy, bioenergy, and geothermics. BayWa r.e. develops, codevelops, finances, executes, and operates turnkey projects. It also manages the commercial and technical operation
of power plants, provides technical consulting, and is a distributor of photovoltaic components and assembly system
components.
TRAINING CENTRES
ORGANIZATION
LOCATIONS
Île-de-France and Aquitaine.
77
SUPPLIERS
B
SUPPLIERS
X
78
© Benoît MENTREL
MANUFACTURERS
TRAINING CENTRES
BUSINESSES SELECTED
PARTNERS
PARTNERS
BUSINESSES SELECTED
BOREAS
Development, construction, and operation of wind farm projects
4 rue Marconi - Centre d’affaires CESCOM - Metz Technopôle, 57070 Metz
+33 (0)3 87 20 41 67
+33 (0)3 87 20 41 65
www.boreas.de [email protected]
BOREAS SARL was created in 2003 in Metz, France. It develops wind farms across France, especially in eastern regions.
It uses local resources and the expertise acquired by its parent company in Germany over the last 15 years.
ACTIVITIES
MANUFACTURERS
Development, construction, and operation of wind farms. With nearly 15 years of experience in wind farm development
in Europe, BOREAS handles all the phases of projects. It performs exploration and construction, financing, maintenance,
and operation for wind farms. Our early years of work culminated in the construction of our first wind farms in France in
2007, with 12 2.5 MW Nordex wind turbines erected across three farms in Boulay-Moselle, for 30 MW in rated power.
TRAINING CENTRES
ORGANIZATION
LOCATIONS
Lorraine.
79
SUPPLIERS
B
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
French producer of 100% renewable energy
2 rue André Bonin, 69316 Lyon cedex 04
+33 (0)4 72 00 69 69
+33 (0)4 72 10 66 70
www.cnr.tm.fr
ACTIVITIES
CNR is dedicated to renewable energy. It is the second-largest producer of electricity in France and the top producer of
100% renewable energy. The company was founded in 1933 to develop the Rhône River and use it for hydroelectricity
production, navigation, irrigation, and other agricultural uses. A long-standing producer of hydroelectricity and a centre
of excellence in hydraulics for GDF SUEZ in France, CNR is continuing highly active development in hydroelectricity and
wind and photovoltaic power. CNR has 3,022 MW of installed power in hydroelectricity on the Rhône and elsewhere,
301 MW in wind energy, and 15 MWp in photovoltaic power. Its goal is to be producing 4,500 MW of 100% renewable
electricity by 2015-2020. Very aware of environmental issues, extremely attentive to the surrounding populations and
mindful of local development and respect for the environment, CNR places sustainable development at the centre
of its concerns. It is involved in a broad general-interest programme to improve waterways, optimise hydroelectricity
production, protect the environment, and strengthen its commitment to the local region.
LOCATIONS
Rhône-Alpes.
MANUFACTURERS
COMPAGNIE NATIONALE
DU RHÔNE (CNR)
SUPPLIERS
C
80
PARTNERS
TRAINING CENTRES
BUSINESSES SELECTED
Exclusively renewable energy
Bollène hydroelectric power plant
Founded in 1933, the Compagnie Nationale du Rhône was given the concession for operating the most
powerful French river in 1934, with the aim of developing and harnessing it to fulfil three missions for
the community: energy production, navigation, and supplying irrigation and other uses for agriculture.
It is France’s second largest electricity producer and an acknowledged actor on the energy market.
With its energy certified 100% renewable, CNR is committed to developing renewable energies and
diversifying its methods of producing electricity. Its goals for developing and generating capacity are
ambitious, in particular in the hydropower, wind power and solar sectors. A partner of the GDF SUEZ
Group, CNR places sustainable development at the heart of its strategy.
A
fully integrated company and expert in intermittent energy management, CNR controls all the processes
from the design and operation of its production facilities to the sale of the energy it produces. Its experience
acquired from operating the Rhone also gives it expertise in river and hydropower engineering, services that
it offers in France and abroad.
Since 2004, it has carried out ambitious and voluntary programmes in the framework of its Missions in the
General Interest in concert with the parties involved. This business model, considered as a reference in the sector
of hydraulic concessions, is based on redistributing the results of the growth and sustainable development of
the territories in which the electricity is produced.
MANUFACTURERS
Fos-sur-Mer wind farm
Graphistar 01/14 : Photothèque CNR / Camille Moirenc
Saulce-Sur-Rhône solar power plant
www.cnr.tm.fr EnergyWINDUSTRY
is our FRANCE
future,
so save it!
- THE FRENCH WIND POWER INDUSTRY 2014
81
SUPPLIERS
X
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
DONG ENERGY
Development, construction, and operation of wind farms
Kraftværksvej 53, 7000 Frédéricia, Danemark
+45 99 55 11 11
www.dongenergy.dk [email protected]
ORGANIZATION
DONG Energy is one of the largest energy companies in Northern Europe. It has over 30 years of experience in wind
power, including 20 in developing, constructing and operating offshore wind farms. The company owns offshore and
onshore farms throughout Europe. Fifteen per cent of the energy produced by DONG Energy comes from wind power.
ACTIVITIES
As a seasoned player, DONG Energy has built more offshore wind farms than any other company in the world. In 2010,
it commissioned the offshore wind farm Gunfleet Sands (172 MW) off the coast of Britain. In early 2011, DONG Energy
and its partners began the construction of the offshore wind farm London Array. With 175 wind turbines with individual
capacities of 3.6 MW (for 630 MW of rated power), London Array will be the largest offshore wind farm in the world. At
the end of 2010, the total capacity of DONG Energy’s onshore and offshore wind farms in service was 1,035 MW. The
capacity of its farms under construction was 1,316 MW. DONG Energy plays an active role in all phases of a project.
As a developer, builder, and operator of offshore wind farms, the company has extremely extensive experience that
surpasses the competition. Its involvement in all phases of projects has enabled it acquire the knowledge that is of
such importance for the development and optimisation of new wind farms.
LOCATIONS
Denmark.
SUPPLIERS
D
82
PARTNERS
5 rue d’Athènes, 75009 Paris
+33 (0)1 44 63 39 98
www.eon.fr [email protected]
ORGANIZATION
E.ON France has its head office in Paris and handles all of E.ON’s activities in France (production, sales and renewable
energy). Founded in 2000, the E.ON group is a world specialist in energy solutions. Renewable energy is an integral
part of its strategy for cleaner, more efficient power. Over the next five years, E.ON intends to invest €7 billion in
renewable energy.
ACTIVITIES
E.ON France is well-established and is the third largest multienergy operator in France. It supplies gas and electricity
and produces electricity and has more than 3.2 GW of production capacity (coal, gas, wind, and solar). Benefitting from
the know-how of the pioneer group in renewable energy, E.ON France has structured its expertise around the creation
of production installations (development, construction, operation, and maintenance) and managing energy produced.
LOCATIONS
Île-de-France.
MANUFACTURERS
Multi-energy operator
TRAINING CENTRES
BUSINESSES SELECTED
E.ON
83
SUPPLIERS
E
PARTNERS
BUSINESSES SELECTED
ECO DELTA
Wind farm development
420 rue des Mattes - ZI ATHELIA 1 - Bat C, 13705 La Ciotat cedex
+33 (0)4 42 01 65 80
+33 (0)4 42 82 31 47
www.ecodd.com [email protected]
A ‘société anonyme’ (limited liability company) with executive and supervisory boards. €1,743,339 in capital. 17 employees.
ACTIVITIES
• Two types of energy: wind and solar
Many projects feature solar and wind power at the same site
• Specialised in large projects
Average size of 20 MW for wind and 8 MWp for solar
• Strong presence in the southeast of France
As well as the Central/Île-de-France area and the eastern portion
LOCATIONS
MANUFACTURERS
TRAINING CENTRES
ORGANIZATION
SUPPLIERS
E
84
PARTNERS
BUSINESSES SELECTED
ECOTERA DEVELOPPEMENT SAS
521 boulevard du Président Hoover - Le Polychrome, 59000 Lille
+33 (0)3 20 37 60 31
+33 (0)3 20 13 96 02
[email protected]
TRAINING CENTRES
ORGANIZATION
Engineering office. 6 employees: 3 engineers, 2 technicians.
ACTIVITIES
Wind, biomass, hydroelectric.
LOCATIONS
MANUFACTURERS
Nord-Pas de Calais.
85
SUPPLIERS
E
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
EDF ENERGIES NOUVELLES
Producer of green energy
100 esplanade du Général de Gaulle - Cœur Défense
Tour B, 92932 Paris La Défense cedex
+33 (0)1 40 90 23 00
+33 (0)1 40 90 23 66
www.edf-energies-nouvelles.com www.edf-en.fr
ORGANIZATION
EDF Energies Nouvelles is a major player in the renewable energy sector. It focuses mainly on wind power (which
represents 87% of its installed capacity) and photovoltaic power, but also works on other renewable energy, including
offshore wind power, marine energy, biomass, biofuel, and biogas. The company is an end-to-end industrial operator,
acting as a developer, constructor, investor/owner, and power plant operator.
MANUFACTURERS
ACTIVITIES
EDF Energies Nouvelles does everything from initiate wind and solar power projects to sell electricity, including:
• Selecting sites and conducting technical feasibility studies (evaluating resources, measuring wind and sun, etc.)
• Analysing impact on the local area and natural environment (measuring noise levels, running landscape simulations, etc.)
• Working with administrative bodies, studying power grid connections, applying for construction permits, organising
financing, and engineering and construction
• Providing operation and maintenance services through its European subsidiary EDF EN Services.
LOCATIONS
Île-de-France.
SUPPLIERS
E
86
PARTNERS
30 boulevard Pasteur, 75015 Paris
+33 (0)6 09 98 04 17
fi[email protected]
ORGANIZATION
Electrawinds France SAS is the French branch of Belge Electrawinds. It produces green energy from wind turbines,
biomass plants, and solar power plants. The company develops, constructs and operates its projects and currently
operates a rated power of nearly 200 MW. It has offices in Paris and Bordeaux.
ACTIVITIES
Electrawinds specialises first and foremost in developing, executing, and operating wind farm projects. It makes equity
investments in its projects, giving it complete control over project finances and allowing local residents to invest in
projects in the form of bonds. In Belgium, Electrawinds is a major offshore wind energy player and has been granted
four leases in partnership. It is developing wood cogeneration projects from the CRE 2 and CRE 3 calls for tenders.
Work on the first project began in October 2013.
LOCATIONS
Île-de-France, Aquitaine.
MANUFACTURERS
Development, execution and operation of wind farm projects
TRAINING CENTRES
BUSINESSES SELECTED
ELECTRAWINDS
87
SUPPLIERS
E
PARTNERS
BUSINESSES SELECTED
ENEL GREEN POWER FRANCE
Development, construction, financing, and operation of renewable energy projects
Immeuble Le Bonnel - 20 rue de la Villette, 69328 Lyon
+33 (0)4 78 92 68 70
+33 (0)4 78 42 03 44
www.enelgreenpower.com [email protected]
TRAINING CENTRES
ORGANIZATION
Enel Green Power France is the French renewable energy operator of the Enel energy group, one of Europe’s top
electricity producers. Enel Green Power is the ENEL group company dedicated to developing and managing projects
generating electricity from renewable sources in Italy and around the world. It has an installed capacity of over
8,000 MW in wind, hydroelectric, solar, geothermic, and biomass power in 16 countries in Europe and the Americas.
ACTIVITIES
LOCATIONS
Rhône-Alpes.
MANUFACTURERS
Enel Green Power France specialises in designing, developing, financing, building, and operating renewable energy
production. ENEL GREEN POWER FRANCE possesses acknowledged expertise enabling it to successfully complete
renewable energy projects from exploration to operation.
SUPPLIERS
E
88
PARTNERS
Cap Cergy - Bâtiment B - 4-6 rue des Chauffours, 95015 Cergy Pontoise cedex
+33 (0)1 30 30 60 09
+33 (0)1 30 30 52 57
www.enertrag.fr [email protected]
ORGANIZATION
ENERTRAG AG Etablissement France is the French arm of the German group ENERTRAG AG, created in 1998. It is one
of the biggest producers of clean energy in Europe, with around 440 employees in several European countries. The
company has 35 employees in France and operates in most of the country.
ACTIVITIES
ENERTRAG intervenes at all stages of the life-cycle of a wind farm project, from the initial ideas to feeding into the
grid. The group develops, finances, builds, and operates its installations, and offers a wide range of operation and
maintenance services. ENERTRAG sells the ENERTRAG Powersystem, a management system for farms in operation, as
well as its own aircraft warning light system from the EST range.
LOCATIONS
Île-de-France.
MANUFACTURERS
Development, financing, construction, and operation of wind farms
TRAINING CENTRES
BUSINESSES SELECTED
ENERTRAG
89
SUPPLIERS
E
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Development and operation of renewable energy projects
94 rue Saint-Lazare, 75009 Paris
+33 (0)1 49 70 95 30
+33 (0)1 49 70 85 20
www.eneryo.com [email protected]
ORGANIZATION
Eneryo is run by a team of professionals with extensive experience and expertise in the renewable energy sector. The
company has around ten employees. Eneryo manages the development, project ownership, financing, and operation
of renewable energy projects. The company has significant investment capacity, allowing it to undertake large-scale
projects. Eneryo develops, constructs and operates projects involving solar power (panels mounted on buildings and
on the ground), wind power, and biomass.
ACTIVITIES
A producer of green energy, Eneryo is a developer, investor/owner, and operator of power plants. Its main areas of
development are photovoltaic and wind power. Eneryo’s growth is mainly based on developing its own projects, as
well as by acquiring others.
LOCATIONS
Île-de-France.
MANUFACTURERS
ENERYO
SUPPLIERS
E
90
PARTNERS
ACTIVITIES
Eole Avenir Développement is an independent company which was founded for individuals wanting to invest in
renewable energy development and specifically in wind energy. The company’s four founders combined their
expertise in wind power technology and financial engineering to open up the industry’s profits to more than just large
corporations. Eole Avenir Développement is the first company in France that offer individuals the chance to participate
in wind farm development in partnership with industry experts. How it works: Although wind farms are part of a French
and European renewable energy objective, the creation of a wind farm is first and foremost a local project resulting
from local discussions and decision-making. Eole Avenir Développement has based its strategy on this observation,
allowing local players to take a central role in the development of the projects it is managing. To develop projects in a
manner consistent with this strategy, Eole Avenir Développement receives help from expert companies located near
project sites. Objectives: Eole Avenir Développement is developing a portfolio of wind farms with a total potential of
300 MW and a portfolio of solar power plants with a total potential of 50 MWp. The company has set itself the goal of
putting at least 100 MW online by 2013. Locations: On 1 January 2010, the company’s portfolio of wind farms was
constituted of wind farms throughout France (Midi-Pyrénées, Brittany, Auvergne, Basse-Normandie, Picardy, Nord-Pas
de Calais, Languedoc-Roussillon, and Rhône-Alpes) and in Eastern Europe. The team: Eole Avenir Développement has
four founding partners who run the company and sit on the board of directors. The partners work in pairs due to their
respective skills and experience:
• Jean-Pierre Dubouchet and Christian Ravion are in charge of relations with private individual investors and manage
the company
• Pascal Berlu and Damien Borot are in charge of the company’s strategy, the development of financial engineering
projects, and the management of these wind farms.
LOCATIONS
Île-de-France.
MANUFACTURERS
52 rue d’Aguesseau, 92100 Boulogne-Billancourt
+33 (0)1 41 31 21 72
+33 (0)1 41 31 21 41
www.eole-avenir.com [email protected]
Co-development, acquisition, financing, construction, and operation of wind farms
TRAINING CENTRES
BUSINESSES SELECTED
EOLE AVENIR DEVELOPPEMENT
91
SUPPLIERS
E
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Wind and solar project development
25 place de la Madeleine, 75008 Paris
+33 (0)1 40 07 95 00
+33 (0)1 40 07 95 06
www.eolfi.com contact@eolfi.com
ORGANIZATION
Founded in 2004, Eolfi has offices in France, Greece, and Poland and is the project development subsidiary of the
Asah Lm group, an independent company specialising in wind power. Based in Paris, Asah Lm covers the entire
renewable energy value chain through its four areas of activity:
• The development of onshore wind farms and solar power plants: EOLFI
• Assets management: EAM, the first management company in France specialising in wind power infrastructures
• Design of floating vertical-axis wind turbines: SPINFLOAT
• Design and development of projects for underwater compressed air energy storage (UW-CAES): AGNES.
Operating through their joint subsidiary, Eolfi, Asah Lm was Veolia’s exclusive partner for wind power until 2013, when
Asah Lm took back full control of Eolfi.
LOCATIONS
Île-de-France.
MANUFACTURERS
EOLFI
SUPPLIERS
E
92
PARTNERS
Development and operation of wind farm projects
9 avenue de Paris, 94300 Vincennes
+33 (0)1 41 74 70 40
+33 (0)1 41 74 70 41
www.epuron.fr [email protected]
ORGANIZATION
EPURON is a European leader in wind farm project development in France. Already well-established in France, EPURON
is dedicated to consolidating its presence by expanding its project development, acquisition and construction, and
project development activities. Since the end of 2010, EPURON has been owned by Impax Asset Management Ltd.,
an investment fund based in London specialising in renewable energy. EPURON has significant investment capacity
and has become a participant in its own right in France’s wind power sector, acting as a project developer, constructor
and producer of clean energy.
TRAINING CENTRES
BUSINESSES SELECTED
EPURON SAS
Epuron develops projects from start to finish, from identifying suitable sites to operating sites and reselling electricity.
Thanks to its expertise and an international network of skills, the company has acquired the knowledge it requires to
execute all stages of wind farm projects. Since 1998, Epuron has been committed to providing unbeatable service as
a personal advisor to government officials and bodies, landowners, and farmers. To do this, it has cultivated a strong
culture of discussion and consensus, resulting in a climate of trust where the stakeholders can express themselves.
LOCATIONS
MANUFACTURERS
ACTIVITIES
Île-de-France.
93
SUPPLIERS
E
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Development, acquisition, construction, and operation of wind farms
770 rue Alfred Nobel, 34000 Montpellier
+33 (0)4 27 04 50 49
+33 (0)4 67 99 61 82
www.eurocape.eu
ORGANIZATION
EuroCape New Energy France is an SARL (limited liability company) with its headquarters and main office at 75
boulevard Haussmann in the 8th arrondissement in Paris, and a secondary operational office at 770 rue Alfred Nobel
in Montpellier, France. It is the French subsidiary of the international EuroCape New Energy group. EuroCape New
Energy France uses its technical expertise to underpin its strong commitment to the development of renewable energy
for its public and private institutional partners.
ACTIVITIES
EuroCape New Energy France specialises in the development, acquisition, construction and operation of wind farms
in France.
LOCATIONS
Languedoc-Roussillon.
MANUFACTURERS
EUROCAPE NEW ENERGY FRANCE
SUPPLIERS
E
94
PARTNERS
5 rue Jean Macé, 35700 Rennes
+33 (0)2 23 45 06 99
+33 (0)2 23 45 06 21
www.falckrenewables.eu
ORGANIZATION
Falck Energies Renouvelables is the French subsidiary of Falck Renewables SpA, a European leader in the energy
production exclusively from renewable sources.
ACTIVITIES
Development, financing, construction, and operation
BUSINESSES SELECTED
Development, financing, construction, and operation of wind farms
TRAINING CENTRES
FALCK ENERGIES RENOUVELABLES
LOCATIONS
MANUFACTURERS
Brittany.
95
SUPPLIERS
F
PARTNERS
BUSINESSES SELECTED
GDF SUEZ
Energy producer
1 place Samuel de Champlain - Faubourg de l’Arche, 92930 Paris La Défense cedex
+33 (0)1 44 22 39 94
+33 (0)1 44 22 26 11
gdfsuez.com [email protected]
TRAINING CENTRES
ORGANIZATION
As the world’s leading independent producer of energy, GDF SUEZ’s mission is to satisfy energy needs, ensure the
security of the supply, fight climate change and optimise the use of resources. Renewable energy subsidiaries and
affiliates in France:
• Wind power: Futures Energies SARL, La Compagnie du Vent, Maïa Eolis, CN’Air
• Photovoltaic/thermal power: Clipsol, Energia, Panosol, Futures Energies SARL, La Compagnie du Vent, CN’Air, Inéo
• Biomass: Cofely
MANUFACTURERS
ACTIVITIES
Control of the entire energy chain:
• Electricity: production, sale, trade and marketing, transmission and distribution networks, infrastructure design and
construction
• Natural Gas and LNG: purchase, production and marketing, exploration/production, distribution networks, transportation
infrastructure, storage, methane terminals
• Energy Services: on-site management of urban power and utilities grids, design and construction of installations, a
portfolio of multi-technical services, energy services
• Environment: water and sanitation services, water treatment engineering, cleaning services
LOCATIONS
Île-de-France.
SUPPLIERS
G
96
97
SUPPLIERS
X
MANUFACTURERS
TRAINING CENTRES
BUSINESSES SELECTED
PARTNERS
SUPPLIERS
98
© ENERTRAG
X
MANUFACTURERS
TRAINING CENTRES
BUSINESSES SELECTED
PARTNERS
PARTNERS
Development and operation of wind farms
17 rue de la Frise - BP 183, 38042 Grenoble cedex 9
+33 (0)4 76 84 89 21
[email protected]
ACTIVITIES
GEG ENeR is the renewable energy production subsidiary of the Gaz Electricité Grenoble group (GEG SAEML), a local
energy company. It owns 11 hydroelectric plants, one wind farm, 18 photovoltaic power plants, and a dozen small gas
cogeneration plants that it operates mostly with its own personnel. GEG ENeR’s project team works on development
with the backing of the Caisse des Dépôts et Consignations and/or partners from all the hydroelectric, wind power,
photovoltaic power, biogas and cogeneration sectors.
MANUFACTURERS
LOCATIONS
TRAINING CENTRES
BUSINESSES SELECTED
GEG ENERGIES NOUVELLES ET
RENOUVELABLES
Rhône-Alpes.
99
SUPPLIERS
G
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
GEOLIS
Development and construction of wind farms
VCF OUEST - BP 46, 44220 Coueron
+33 (0)2 51 11 25 79
+33 (0)2 51 11 28 48
www.geolis.eu fl[email protected]
ORGANIZATION
With its extensive experience in wind farm construction, VINCI Construction France embarked on the development of
projects with the launch of the Geolis brand. Geolis uses its expertise to provide assistance to executive directors of
VINCI Construction France. With nearly 400 locations in France, projects are overseen by local companies.
ACTIVITIES
Wind power: Geolis’ expertise ranges from identifying suitable sites to constructing wind farms.
Pays de la Loire.
MANUFACTURERS
LOCATIONS
SUPPLIERS
G
100
PARTNERS
SUBSIDIARY OF GLOBAL WIND POWER EUROPE A/S-
Wind projects development
15 rue Jean Jaurès, 92800 Puteaux
+33 (0)1 73 00 67 85
+33 (0)1 73 00 67 99
www.globalwindpower.fr [email protected]
ORGANIZATION
ACTIVITIES
• Development of wind projects (Greenfield)
• Acquisition of wind projects with partners
• Construction and implementation of wind projects (Turnkey and semi-turnkey)
• Sale of wind projects and running farms - Global Wind Power is not a producer of electricity
• Technical and commercial management of wind projects
LOCATIONS
Located in Puteaux, the team is focused on the northern half of France. 22 MW are under construction and 40 MW
under instruction in Champagne-Ardenne, 8 MW have recently started to produce in Pas-de-Calais.
MANUFACTURERS
In 2009, the French company “Vent Invest”, wind energy project developer since 2002, became Global Wind Power
France, a subsidiary of the Danish company Global Wind Power Europe A / S, specialised in the development, the
implementation and the management of wind investment projects since 1999.
Global Wind Power now has 8 employees in France and 40 in the group. Since its creation, Global Wind Power has
participated in the implementation of 610 MW throughout Europe and carries on the development of a 600 MW
pipeline, including 200 MW in France.
In France, Global Wind Power built in 2010 the first public park (8 MW) of France, in Montdidier (Somme - 80), and
is in charge of the technical and commercial management since then.
TRAINING CENTRES
BUSINESSES SELECTED
GLOBAL WIND POWER FRANCE
101
SUPPLIERS
G
PARTNERS
BUSINESSES SELECTED
Development of renewable energy projects
5 rue Paule Raymondis, 31200 Toulouse
+33 (0)5 61 20 16 92
+33 (0)5 61 20 60 85
www.hyseo.fr [email protected]
ACTIVITIES
Development of renewable energy projects.
LOCATIONS
Midi-Pyrénées.
MANUFACTURERS
TRAINING CENTRES
HYSEO
SUPPLIERS
H
102
PARTNERS
Development
Developm
p ent of renewable energy
energgy pr
pprojects
ojjects
8 rue Escudier, 92513 Boulogne-Billancourt cedex
+33 (0)1 47 12 44 71
+33 (0)1 47 12 42 65 www.idex-groupe.com
ORGANIZATION
Headquartered in Boulogne-Billancourt, Idex is France’s leading independent operator in energy and environmental
services. For more than 30 years, Idex has firmly established its activity in business related to renewable energy by
performing major operations in diverse sectors:
• Construction of the first WIND farm in France (Port-La-Nouvelle in 1992)
• GEOTHERMAL power plants providing urban heating (Le Mee/Seine in 1980)
• Anaerobic METHANISATION of household waste (Amiens in 1992)
• Multiple operations in WOOD and SOLAR thermal energy
• Regional and agricultural methanisation (Géotexia in Saint-Gilles-du-Mené)
Idex has formed teams that specialise in setting up renewable energy projects and work closely with the 54 agencies
throughout France.The teams offer fixed-term guarantees regarding the performance of installations through maintenance
contracts and operation of the sites and/or projects developed.
MANUFACTURERS
ACTIVITIES
TRAINING CENTRES
BUSINESSES SELECTED
IDEX SAS
Idex works in the fields of:
• Wind power
• Wood energy
• Waste recovery
• Photovoltaic and solar thermal energy
• Energy and cogeneration optimisation.
Idex is a unique operator in that it is active at all stages of the project, including:
• Feasibility studies and expert assessment
• Financial and legal engineering
• Leading and/or executing construction projects
• Managing the completed structures
• Technical operation with guarantee of results.
Idex serves a wide range of clients:
• Local authority and public project owners
• Farmers associations
• Public and private industrialists
• Investors.
LOCATIONS
I
103
SUPPLIERS
Île-de-France.
PARTNERS
BUSINESSES SELECTED
INITIATIVES & ENERGIES LOCALES
Installer and producer of renewable energy
41 ter boulevard Carnot, 22000 Saint-Brieuc
+33 (0)2 30 96 02 21
+33 (0)2 96 01 99 69
www.iel-energie.com
[email protected]
MANUFACTURERS
TRAINING CENTRES
ORGANIZATION
SUPPLIERS
I
Founded in January 2004, IEL is an independent group specialising in the development, installation, and operation
of renewable energy projects. Based in Saint-Brieuc in France in a low-energy-consumption building, IEL has 30
employees and is continuing its controlled growth.
Since it was founded, IEL has developed more than 70 MW in wind power, 50 MW of which is currently in operation.
The company is continuing its wind energy activities with studies concerning a portfolio of more than 200 MW in
advanced projects. Backed by its extensive experience in wind power, IEL also develops solar power projects with
panels mounted both on buildings and on the ground with a view to operating them. Almost 100 MW of solar power
is currently in development in the Grand Ouest area of France.
Since 2007, IEL has been designing, installing, and maintaining solar power plants mounted on buildings for industrial
clients, farmers and local authorities Working through its subsidiary, IEL Etudes & Installations, IEL has become one
of the main players in the photovoltaic power sector in the Grand Ouest area and is an acknowledged expert in the
field. IEL remains true to its philosophy by working exclusively with European manufacturers.
IEL has been working as a producer of electricity since 2008 through its subsidiary, IEL Exploitation. Its operations
portfolio currently contains 4.5 MW of wind power and 2 MW of solar power. The company will launch a number of
other production units in 2013 and 2014.
IEL has been working in the methanisation sector since 2011, in partnership with Odipure. This partnership, formalised
by IEL’s majority involvement in the capital of Odipure, develops and operates methanisation projects, allowing the
recycling of waste from agriculture, the food industry, and local authorities.
ACTIVITIES
In the wind power industry, IEL conducts studies prior to obtaining construction permits, finances construction projects,
oversees their installation, and handles their operation. IEL is involved throughout all the phases of the project life-cycle
with multidisciplinary development teams, teams of project financing specialists, and an operations centre. A single
contact today and tomorrow for the local elected officials: IEL.
LOCATIONS
IEL South Loire
1 rue de la Belle Allée - 85290 Mortagne-sur-Sèvre - France
Tel.: 09 67 21 31 62
104
PARTNERS
BUSINESSES SELECTED
JMA ENERGIES
Development and operation of wind farms and photovoltaic power installations
Corn-Ar-Hoat, 29150 Cast
+33 (0)2 98 16 12 60
+33 (0)2 98 16 12 60
[email protected]
TRAINING CENTRES
ORGANIZATION
Family business working in development and operation.
ACTIVITIES
Development and operation of wind farms and photovoltaic power plants.
LOCATIONS
MANUFACTURERS
Brittany.
105
SUPPLIERS
J
PARTNERS
BUSINESSES SELECTED
JP ENERGIE ENVIRONNEMENT
Creator of renewable energy
57 rue de la Chaussée d’Antin, 75009 Paris
+33 (0)1 44 50 55 47
+33 (0)1 44 50 55 46
www.jpee.fr [email protected]
SAS (Simplified private limited company) with capital of €1,245,000.
ACTIVITIES
JP Energie Environnement develops, finances, builds, and operates power plants that produce electricity from all types
of renewable sources, including wind, photovoltaic, hydroelectric and biomass. In 2013, JPEE was operating 6 wind
farms and 53 photovoltaic power plants, for a total of 94 MW in installed power, enough to power around 56,000
homes. More new farms will be built this year which will double JPEE’s installed power. JPEE’s projects are mainly
financed by private investors. To date, more than 2,000 shareholders have already entrusted their renewable energy
investments to JPEE.
LOCATIONS
Head office: Caen
Engineering offices: Paris
Satellite offices: Le Mans, Nantes
MANUFACTURERS
TRAINING CENTRES
ORGANIZATION
SUPPLIERS
J
106
PARTNERS
Le Triade II - Parc d’activités Millénaire II, 215, rue Samuel Morse
CS 20756, 34967 Montpellier cedex 2
+33 (0)4 99 52 64 70
+33 (0)4 99 52 64 71
www.compagnieduvent.com
ORGANIZATION
La Compagnie du Vent, part of the GDF SUEZ group, had 143 employees in 2013. It has installed and currently operates
23 wind farms and 2 photovoltaic power plants.
ACTIVITIES
A wind energy pioneer in France, today La Compagnie du Vent is one of the leading players in renewable energy. At
end 2013, it was behind more than 30 installations (wind and photovoltaic) in operation or construction in France and
Morocco, for rated power of nearly 400 MW. The company also initiated the offshore wind farm project ‘Deux Côtes’ off
the Somme and Seine-Maritime coast and is working on the project in conjunction with GDF SUEZ. La Compagnie du
Vent has undertaken a promising diversification into solar power with the operation of the largest photovoltaic tracker
power plant in France (Porette de Nérone in Corsica) and has seven projects under way, for a rated power of 66 MWp.
Key numbers:
• 23 wind farms installed in France and 2 in Morocco, and 2 photovoltaic power plants in France
• Rated power: 359 MW (in France and Morocco), of which 63 MW are project managed
• Number of wind turbines: 299 (in France and Morocco), of which 99 are project managed
• Production in 2012 (in France): approximately 500 million kWh, or enough electricity for almost 280,000 people
(source: RTE 2011 - excluding heating)
• Turnover in 2012: €42.7 millions
• Capital: €13,872,375.
LOCATIONS
Head office in Montpellier, Languedoc-Roussillon.
MANUFACTURERS
Production of electricity using wind and photovoltaic power
SUBSIDIARY OF GDF SUEZ GROUP-
TRAINING CENTRES
BUSINESSES SELECTED
LA COMPAGNIE DU VENT
107
SUPPLIERS
L
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Wind power professionals
Tour de Lille - Boulevard de Turin, 59777 Lille
+33 (0)3 20 214 214
+33 (0)3 20 131 231
www.maiaeolis.fr [email protected]
ORGANIZATION
Maïa Eolis, a subsidiary of the Maïa group, owns owned at 49% by GDF SUEZ. Founded in 2006, it has a capital of
€230,040,000 and develops, constructs, operates, and manages the maintenance of its wind farms in France.
ACTIVITIES
Maïa Eolis has around 60 employees, engineers, and technicians based in Lille and Lyon and at our maintenance
centres in Picardy and Lorraine developing and operating wind farms in France. We are your sole contact, covering all
the stages of the life-cycle of a wind farm project: studies and development, financing, construction, operation, and
maintenance services for our wind farms.
LOCATIONS
Nord-Pas de Calais.
MANUFACTURERS
MAÏA EOLIS
SUPPLIERS
M
108
PARTNERS
Our regions need all our energy sources
1 rue Etienne d’Orves - Base de Keroman, 56100 Lorient +33 (0)2 97 37 56 06
+33 (0)2 97 37 56 54 www.nass-et-wind.com [email protected]
BUSINESSES SELECTED
NASS&WIND SAS
Founded by Peter Nass and Nathalie Le Meur in Morbihan, France in 2001, Nass&Wind is today one of the leaders
in renewable energy development in France. Nass&Wind’s subsidiaries develop renewable energy projects across
France (e.g. offshore wind energy, photovoltaic power, and wood energy), from exploring potential sites to operating
them, including financing and building power plants.The company’s reputation hinges in particular on the quality of its
environmental and technical surveys, the importance it places on consultation, the involvement of local players in the
development and finalisation of projects, and the relevance of the technical and financial arrangements. Nass&Wind is
an independent French group with capital of €40 million. It is located in Lorient (Morbihan) and has about 40 employees.
TRAINING CENTRES
ORGANIZATION
LOCATIONS
Brittany.
1. In 2012, Nass&Wind Offshore was a joint winner–along with EDF EN, DONG Energy, and Alstom–in the first call for
tenders for the installation of offshore wind farms. Currently, the company is working on several offshore wind farm
projects off the coast of France (in the Atlantic, English Channel, and North Sea), thereby contributing to national and
regional energy production goals.
2. Nass&Wind Industrie offers an extensive range of engineering services for offshore wind farms and is leading the
Winflo floating offshore wind turbine project launched in 2007 in close partnership with DCNS, and with the help
of IFREMER and ENSTA Bretagne. The aim of this project is to design, industrialisation, and sell an innovative, multimegawatt floating offshore wind turbine system that is effective from a depth of 50 metres. A demonstration model
will be launched in 2013 off the coast of France. A pilot farm with several machines will be installed in 2016, paving
the way for the installation of an initial commercial farm, which will be operational by 2020. Production ramp-up will
create several thousand jobs in France. The project was certified by the Mer Bretagne competitiveness cluster in 2008
and has received support from ADEME as a future investment.
3. The group’s other subsidiaries are dedicated to acquiring and operating photovoltaic power plants (Nass&Wind
Invest) and forests (Nass&Wind Forêts), and using global solutions to help local authorities and professionals finance,
build, and operate wood boilers to produce heat or heat and electricity (Nass&Wind Bois Energie).
MANUFACTURERS
ACTIVITIES
109
SUPPLIERS
N
PARTNERS
BUSINESSES SELECTED
NEOEN
Energy producer
Tour Maine Montparnasse - BP 108 - 33 avenue du Maine, 75775 Paris cedex 15
+33 (0)805 160 022
+33 (0)1 70 91 62 20
www.neoen.com [email protected]
neonen develops, finances, constructs and operates green energy power plants such as wind farms (onshore and
offshore), solar power plants, and biomass units. neonen’s goal is to become one of the top five independent producers
of green energy in France. Present in France and Portugal, neonen is striving for a diversified, complementary portfolio
of 1,000 MW in assets by 2016. It is breaking into high-potential markets in Central America, North America, Africa,
and Australia.
ACTIVITIES
neonen performs all the stages of power plant projects, from development, financing, and construction to operation and
dismantlement.To develop its production infrastructures, neonen is turning to farmers, local authorities and businesses,
offering them flexible solutions adapted to local areas. neonen helps its clients understand the main issues linked
to projects and guides them through the administrative processes required to successfully complete these projects.
LOCATIONS
Île-de-France.
MANUFACTURERS
TRAINING CENTRES
ORGANIZATION
SUPPLIERS
N
110
PARTNERS
BUSINESSES SELECTED
NOUVERGIES
Development and operation of wind farms
21a boulevard Jean Monnet, 94357 Villiers-sur-Marne
+33 (0)1 77 61 55 60
+33 (0)1 77 61 55 03
www.nouvergies.com [email protected]
ACTIVITIES
Nouvergies was founded in 1999. It is committed to developing and supporting new projects that address current
issues concerning the control of energy consumption and the use of resources that do not emit greenhouse gases.
Its projects have a regional focus and aim to contribute to local development to meet residents’ environmental, social,
and economic expectations. After acquiring the Goulien and Assigny wind farms in 1998 and 2005, the company’s
teams assisted with the commissioning of the Trémeheuc wind farm in Ille-et-Vilaine (2 MW 6xV90). With 10 years
of experience in the wind power sector throughout France, Nouvergies is continuing its growth as an independent
developer. Its teams assist local authorities and landowners in the design of high-quality, participatory projects that
comply with regulations, promote the region’s development, and are environmentally-friendly.
LOCATIONS
Île-de-France.
MANUFACTURERS
Nouvergies: Operation of wind farms in Haute-Normandie and Brittany, and development in France.
TRAINING CENTRES
ORGANIZATION
111
SUPPLIERS
N
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
OSTWIND INTERNATIONAL
SUBSIDIARY OF OSTWIND AG-
Development, design, construction, and operation of wind farms
1 rue de Berne - Espace Européen de l’Entreprise, 67300 Schiltigheim
+33 (0)3 90 22 73 40
+33 (0)3 90 20 09 48
www.ostwind.fr [email protected]
ORGANIZATION
The OSTWIND group, located in Ratisbonne, Germany, is an independent family business that operates throughout
Europe via a team of around a hundred employees. Its French subsidiaries, OSTWIND International and OSTWIND
Engineering, employ more than 30 people across seven sites.
ACTIVITIES
OSTWIND develops, designs, builds, and operates wind farms. The company is involved in every step of the execution
of a wind farm project. Its strength lies in its thorough understanding of all the parameters necessary to design
wind farms that reflect their region: preliminary investigations, an analysis of constraints, coordination of studies
consultations, authorisation procedures, the design stage, legal and financial arrangements, construction, project
management and operation.
OSTWIND also produces electricity. It owns 32 MW out of the 235 MW currently available in France.
LOCATIONS
In addition to its engineering office near Strasbourg, OSTWIND International has six local offices:
• in Fruges, Toulouse, Tours, Amiens, and Lyon for development
• in Tincques for operations.
Between 1999 and 2013, OSTWIND connected wind farms in the following areas:
• Ardèche (Saint Clément, 1.2 MW)
• Pas-de-Calais (Canton de Fruges Communauté de Communes (joint local authorities), 140 MW; Atrébatie Communauté
de Communes, 54 MW),
• Basse-Normandie (Saint-Jacques-de-Néhou, 10 MW)
• Meurthe-et-Moselle (Deux Rivières Communauté de Communes, 30 MW).
SUPPLIERS
O
112
PARTNERS
Domaine de Patau, 34420 Villeneuve-les-Béziers
+33 (0)4 67 26 61 28
+33 (0)4 67 01 32 97
www.quadran.fr [email protected]
ORGANIZATION
Quadran is one of the leading independent integrated producers of renewable energy (wind power, photovoltaic power,
hydroelectricity, and biogas/biomass) in France and abroad. Quadran was formed by the merger of JMB Energie and
Aérowatt on June 30, 2013. Since then, it has drawn on the combined experience and undeniable expertise of each
company. From its knowledge of wind resources (through its subsidiary Winergy) to the production of electricity (with
136 power plants in operation), Quadran is a fully-integrated group. Quadran is an independent company backed by
specialised financial partners (Demeter, IRPAC, and SORIDEC).
ACTIVITIES
The Quadran group is involved in all the stages of the life-cycle of a power plant: the search for sites and the
administrative processes, wind studies, technical studies, searching for financing, construction, operation, sale of
electricity and dismantling.
LOCATIONS
MANUFACTURERS
Free energy, developer, builder, and operator of renewable energy power plants
TRAINING CENTRES
BUSINESSES SELECTED
QUADRAN (JMB énergie +
Aérowatt)
113
SUPPLIERS
Q
PARTNERS
BUSINESSES SELECTED
SAINT-LAURENT ÉNERGIE
Hydroelectric, wind and photovoltaic operation
2 rue du Char d’Argent, 88000 Epinal
+33 (0)3 29 64 14 46
+33 (0)3 29 32 31 12
[email protected]
Saint Laurent Energie is a holding composed of 14 companies. Saint Laurent Energie develops and operates hydroelectric
and photovoltaic power plants and wind farms.
ACTIVITIES
Saint Laurent Energie SNC started out in 1984 working in renewable energy and hydroelectric plants. It had six power
plants in operation with a capacity of 10 MW and an annual turnover of €2 million. In 2003, the company made its
wind power debut, acquiring several wind farms under development in partnerships. The company is also developing
photovoltaic power plants.
LOCATIONS
Lorraine.
MANUFACTURERS
TRAINING CENTRES
ORGANIZATION
SUPPLIERS
S
114
PARTNERS
BUSINESSES SELECTED
SAMEOLE
Producer of wind energy
rue du Poirier, 14650 Carpiquet
+33 (0)2 31 29 20 00
+33 (0)2 31 29 20 09
www.sameole.fr sameole@samfi-invest.fr
TRAINING CENTRES
ORGANIZATION
Developer, investor, and operator of wind farms.
ACTIVITIES
MANUFACTURERS
• Development of wind farm projects
• Arranging of financing
• Project management services
• Technical management for wind turbine construction sites
• Supervision, maintenance and management of wind farms.
Wind farms in operation for 75 MW:
• SAUCOURT (Somme)
• MEAUTIS-AUVERS (Manche)
• MAISNIERES (Somme)
• PITHIVIERS (Loiret)
• GUEHENNO (Morbihan)
• BAZOCHES (Loiret)
• ST-MARTIN-DE-CRAU (Bouches-du-Rhône)
• PLOUISY (Côtes-d’Armor)
Seven wind farms with a projected total of 104 MW.
Over 100 MW in development.
LOCATIONS
Lower Normandy.
115
SUPPLIERS
S
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SERGIES
Development, financing, construction, and operation of wind farms and photovoltaic
power plants
78 avenue Jacques Cœur - CS 10000, 86068 Poitiers cedex 9
+33 (0)5 49 44 79 42
+33 (0)5 49 60 54 30
www.sergies.fr [email protected]
ORGANIZATION
Founded in 2001, SERGIES is a Société d’Economie Mixte Local (semi-public company) with executive and supervisory
boards. Eighty-five per cent of its €10,100,010 in capital is held by the Syndicat Intercommunal d’Electricité et
d’Equipement of the Vienne ‘département’ (Syndicat ENERGIES VIENNE), and fifteen per cent by institutional partners.
ACTIVITIES
In response to the expectations of the 265 communes which are members of the Syndicat ENERGIES VIENNE, SERGIES
is positioned as a local public investor committed to the carefully planned and controlled development of its projects.
SERGIES owns the largest wind farm (12 wind turbines) in Vienne. The farm is currently under construction in the
communes of St-Macoux, Lizant, St-Gaudent, and Voulême. SERGIES has also built the largest photovoltaic surfaces in
Vienne, with more than 150,000 m2 of roofing covered by photovoltaic panels so far. It has also worked in bioenergy
(landfill gas, methanisation) and in promoting the control of the energy demand.
LOCATIONS
Poitou-Charentes.
SUPPLIERS
S
116
PARTNERS
BUSINESSES SELECTED
STATKRAFT FRANCE SAS
European leader in renewable energy
Cité Internationale de Lyon - 66 quai Charles de Gaulle, 69463 Lyon cedex 06
+33 (0)4 78 94 94 86
+33 (0)4 78 94 94 87
www.statkraft.fr [email protected]
Statkraft’s sole shareholder is the Norwegian government. The company was founded in 1895 when a waterfall was
acquired for the purpose of producing electricity.
ACTIVITIES
Statkraft is a leading producer of hydroelectricity in Norway, Sweden, Finland, Germany, and the United Kingdom. It has
a rated power of 16,430 MW, including 13,000 MW of hydroelectricity. Statkraft also produces power from onshore
and offshore wind farms and owns several biomass production plants.
MANUFACTURERS
LOCATIONS
TRAINING CENTRES
ORGANIZATION
Rhône-Alpes.
117
SUPPLIERS
S
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SOFIVA ENERGIE
Independent engineering office specialising in renewable energy
Route de Montélimar - BP 70 - Parc d’activités commerciales du Moulon,
07202 Aubenas cedex
+33 (0)4 75 35 40 41
+33 (0)4 75 93 35 52
sofi[email protected]
ORGANIZATION
The activity covers everything from construction to operation. The office works exclusively with energy engineers and
manufacturers of turbines and parts for renewable energy projects to co-develop wind and solar power projects. Due
to its work in wind power in late 1995, the company became a partner and later, an associate, of Enron and then
GE Energy. In 2005, Sofiva extended the development of existing wind farms on its own behalf, and it participated in
explorations and administrative and technical studies in Spain aiming to develop of solar power plants, (in France
as well) up until June 2010. In 2006, Sofiva Energie opened several wind farms in the Languedoc-Roussillon and
Rhône-Alpes regions, co-developing them with a major operator on the market. In 2014, Sofiva Energie will continue
co-developing wind and solar power plants before moving on to the operational phase in late 2015.
ACTIVITIES
Sofiva Energie’s development services cover all technical and administrative operations, from exploration to industrial
commissioning according to the contracts signed with its partners or associates in the wind power sector. Despite
current shortages in the market, Sofiva is studying wind power, photovoltaic power and concentrated solar power
both in France and abroad.
Key numbers:
• Nine employees.
• Capacity under co-development: approximately 70 to 120 MW in wind power and solar (in France and abroad).
LOCATIONS
Rhône-Alpes.
SUPPLIERS
S
118
PARTNERS
Immeuble le Régent - 4 rue Jules Ferry, 34000 Montpellier
+33 (0)4 67 58 22 70
+33 (0)4 67 92 58 61
www.theolia.com
ORGANIZATION
THEOLIA France began as an engineering office in 2001 and was incorporated into the THEOLIA group in May 2005.
Today,THEOLIA France employs close to 50 people and has three locations for better proximity: its headquarters, located
in Montpellier, the northwest office based in Rouen, and the eastern office, located in Strasbourg. The company has
all the technical, administrative, and financial skills it needs to function for the entire life cycle of a wind farm project,
from exploration to operation.
ACTIVITIES
As a developer, builder, and operator of wind farms, THEOLIA France is an expert in all the phases of wind farm
construction: identification of suitable sites, development and financing of projects, construction of the farms and
maintaining and operating them.
LOCATIONS
MANUFACTURERS
Designer of wind farms
TRAINING CENTRES
BUSINESSES SELECTED
THEOLIA FRANCE
119
SUPPLIERS
T
PARTNERS
BUSINESSES SELECTED
UNITE
Production of renewable energy
2 rue Président Carnot, 69293 Lyon cedex
+33 (0)4 72 41 08 08
+33 (0)4 72 77 97 97
www.unit-e.fr [email protected]
TRAINING CENTRES
ORGANIZATION
Founded in 1985, UNITe is a veteran in renewable energy. The group’s three main development structures are:
• UNIT ENERGY SAS in Lyons: hydroelectric, photovoltaic, and wind energy production
• HYDROWATT SAS in Lyons: hydroelectric engineering, new builds, site renovation, operation, and maintenance
• ALTERNATIVE TECHNOLOGIQUE (AL TECH) in Nantes: development of wind and photovoltaic power projects, an
environmental engineering office (AL TECH has developed more than 250 MW in wind energy for third parties).
HYDROWATT owns two plants, in St-Girons (in Ariège) and Charézier (in Jura), that manufacture hydromechanic and
electrical equipment. It also has five maintenance sites in France.
MANUFACTURERS
ACTIVITIES
UNITe is a specialist in the production of renewable energy. The UNITe group works in the following sectors:
• Hydroelectricity: installed power of 43 MW across 25 plants throughout France
• Wind energy: installed power of 20 MW across 3 installations
• Photovoltaic power: own installed power of 8 MW.
UNITe operates renewable energy sites with more than 100 MW of rated power for itself and on behalf of third parties.
The annual production of renewable energy sold directly by the UNITe group stands at around 250 GWh. In addition
to its production activities, the UNITe group is also an industrial engineering company which handles all the phases
of project development, construction and maintenance of installations.
LOCATIONS
Rhône-Alpes.
SUPPLIERS
U
120
PARTNERS
BUSINESSES SELECTED
VELOCITA ENERGIES
Development, financing, construction, and operation of onshore wind farms
65 avenue Kléber, 75116 Paris
+44 207 952 2232
www.velocitaenergy.com [email protected]
ACTIVITIES
Development, financing, construction, and operation of onshore wind farms in Europe.
Velocita Energies currently has around 20 projects under development in France, for a potential total power of more
than 700 MW. In France, the regions involved include Franche-Comté, Champagne-Ardenne, Midi-Pyrénées, Burgundy,
Rhône-Alpes, Alsace, and Lorraine.
In the UK, an initial project in operation (24 MW), one project under construction (12 MW), and about 15 projects in
development in Scotland, for a potential of 450 MW.
LOCATIONS
Île-de-France.
MANUFACTURERS
General Director: Pierre-Antoine Tetard ([email protected])
Operations Manager: Eric Caradec ([email protected])
TRAINING CENTRES
ORGANIZATION
121
SUPPLIERS
V
PARTNERS
BUSINESSES SELECTED
VENDÉE ENERGIE
Development and operation of wind farms and photovoltaic power installations
3 rue du Maréchal Juin, 85036 La Roche-sur-Yon cedex
+33 (0)2 51 45 88 86
+33 (0)2 51 45 88 99
[email protected]
Vendée Energie is an energy-producing Société d’Economie Mixte Locale (SAEML) (French semi-public company)
created by the SyDEV (Syndicat Départemental d’Energie et d’équipement for the Vendée region) in 2012 to replace
the Régie d’Electricité de Vendée (REVe). With a capital of €3,778,264, 75% of Vendée Energie’s shares are held by
SyDEV, 10% by Caisse des Dépôts, 10% by SOREGIES, and 5% by SERGIES.
ACTIVITIES
Vendée Energie develops, invests in, and operates power plants, especially plants that produce renewable energy
(wind, photovoltaic, methanisation, etc.), in conjunction with all the economic players (local authorities, farmers,
industrialists). Vendée Energie operates six wind farms with a total of 50 MW in rated power and 36 photovoltaic
power plants of 2.5 MWp installed on public buildings.
LOCATIONS
Pays de la Loire.
MANUFACTURERS
TRAINING CENTRES
ORGANIZATION
SUPPLIERS
V
122
PARTNERS
BUSINESSES SELECTED
VENT D’EST SAS
Operator
9 boulevard Thiers, 88201 Remiremont cedex
+33 (0)6 42 71 33 90
www.vent-d-est.com [email protected]
TRAINING CENTRES
ORGANIZATION
Vent d’Est brings together private investors and residents living near production sites.
ACTIVITIES
Generation of wind energy
LOCATIONS
MANUFACTURERS
Champagne-Ardenne, Lorraine.
123
SUPPLIERS
V
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
VENTS D’OC ENERGIES
RENOUVELABLES
Development and construction of wind farms and photovoltaic power installations
14 rue Bourrely, 34000 Montpellier
+33 (0)4 67 47 86 61
+33 (0)4 99 64 08 31
www.ventsdoc.com
ORGANIZATION
Vents d’Oc - Energies Renouvelables is associated with German company Windwärts Energie GmbH, located in Hanover,
Germany. Since its creation in 1994, Windwärts Energie has developed renewable energy projects in Germany, Italy,
and France.
MANUFACTURERS
ACTIVITIES
Developer of wind farms and photovoltaic power plants. Vents d’Oc assists with all stages of project development
and execution, from looking for a suitable site, feasibility studies, and authorisation procedures to technical planning
and commissioning. It also organises the monitoring and management of wind and photovoltaic power plants. Its
partner, Windwärts Energie, develops, finances, and operates wind farms and photovoltaic power plants, and also
acquires projects in all stages of development. As a general contractor, the company develops and builds turnkey
photovoltaic power systems.
LOCATIONS
SUPPLIERS
V
124
PARTNERS
1350 avenue Albert Einstein - PAT Bât 2, 34000 Montpellier
+33 (0)4 11 95 00 30
+33 (0)4 11 95 00 31
www.vol-v.com [email protected]
ORGANIZATION
Vol-V is a group with a capital of €18.9 billion. Its head office is located in Montpellier and it has two satellite offices
in Rouen and Rennes. Mid-2013, Vol-V employed around 35 people.
ACTIVITIES
Vol-V designs, develops, monitors construction, obtains financing and operates renewable energy power plants on its
own behalf based around three areas of activity:
• Vol-V Eole: develops and operates wind farms
• Vol-V Solar: develops and operates photovoltaic power plants installed on buildings
• Vol-V Biomass: develops local power plants that produce biomethane from agricultural or agribusiness materials.
LOCATIONS
Languedoc-Roussillon, Upper Normandy and Brittany.
MANUFACTURERS
Designer of renewable energy solutions - Independent producer of green energy
TRAINING CENTRES
BUSINESSES SELECTED
VOL-V SAS
125
SUPPLIERS
V
PARTNERS
BUSINESSES SELECTED
VOLTALIA
Producer of renewable energy
12 rue Blaise Pascal, 92200 Neuilly-sur-Seine
+33 (0)1 40 88 96 10
+33 (0)1 40 88 96 11
www.voltalia.com [email protected]
Founded in 2004, Voltalia is a French société anonyme (limited liability company) with a capital of €72,760,537.05.
Voltalia’s majority shareholder is Voltalia Investissement, a holding whose majority shareholder is Creadev, an investment
vehicle owned by the Mulliez family. Voltalia has been listed on the Open Market (NYSE Euronext) since May 2006.
ACTIVITIES
A fast-growing producer of renewable energy, Voltalia has 80 employees in France, Guiana, Greece, and Brazil. It
develops, builds, and operates power plants according to a multi-energy strategy, using the best technology for each
site: wind, solar, hydroelectricity, or biomass. Voltalia manages all steps of a project, from obtaining land and the proper
authorisations to financing, building, and operating/management of the power plants.
LOCATIONS
Île-de-France, Provence-Alpes-Côte d’Azur, and Guiana.
Greece and Brazil.
MANUFACTURERS
TRAINING CENTRES
ORGANIZATION
SUPPLIERS
V
126
PARTNERS
La Neuvillette - 47 rue Louis Pasteur, 51100 Reims
+33 (0)3 26 35 29 72
+33 (0)3 26 35 62 80
www.windvision.com [email protected]
ORGANIZATION
Windvision is an international company founded in 2002 specialising in the production of renewable energy from
wind turbines.
ACTIVITIES
Windvision coordinates all the processes for building a wind farm: searching for the ideal site, negotiating with landowners
and authorities, scheduling, conducting studies, obtaining building permits, financing, construction, operation, and
maintenance of the farm. It places special emphasis on consulting project stakeholders and keeping them informed
to create a real partnership with them. A pioneer in the development of 7.5 MW machines, Windvision continues to
pursue its ambitions for development in France and abroad.
LOCATIONS
Champagne-Ardenne.
MANUFACTURERS
TRAINING CENTRES
BUSINESSES SELECTED
WINDVISION
127
SUPPLIERS
W
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
WPD OFFSHORE FRANCE
Development of offshore wind farms
94 rue Saint -Lazare, 75009 Paris
+33 (0)1 82 72 61 00
www.wpd-offshore.fr [email protected]
ORGANIZATION
The WPD group operates in 20 countries and has been specialising in developing, financing, constructing and operating
onshore and offshore wind farms since 1996. With 1,500 turbines in operation representing 2.5 GW of rated power,
WPD is a European leader in the wind power sector. The group’s financial soundness is proven by the ‘A’ rating it has
received from Euler Hermes (a subsidiary of Allianz) every year since 2003. WPD Offshore currently has 18 projects
under way in six countries, for total power of over 10 GW. Eight of the projects have already received authorisation
(five in Germany, two in Sweden, and one in Finland) and are at different stages of completion. WPD Offshore France,
a subsidiary formed in 2007, is developing wind farm projects off the coast of France on the English Channel - North
Sea coast and on the Atlantic coast with the aim of constructing and operating these installations. These projects
are developed in close collaboration with the regional players and represent a potential rated power of 2,500 MW.
ACTIVITIES
In Germany, WPD Offshore developed the first offshore wind farm in the Baltic Sea (Baltic I, inaugurated in 2011), and
in February 2013 the company finalised financial arrangements for Butendiek (80 wind turbines in the North Sea
built with an investment of €1.3 billion), construction of which will be under the responsibility of WPD Offshore and
is scheduled to begin in Spring 2014. WPD Offshore France draws on the wind power expertise of the WPD group
and its subsidiary WPD Offshore Solutions, a specialist in the construction and operation of offshore wind farms. In
France, WPD Offshore won its two longstanding projects in consortium with EDF Energies Nouvelles and DONG Energy,
and with Alstom as the exclusive supplier: Fécamp (Seine-Maritime) and Courseulles-sur-Mer (Calvados), totalling
948 MW. On 29 November 2013, WPD Offshore, in association with EDF EN, submitted bids for the Tréport, Île d’Yeu,
and Noirmoutier sites. As part of the second call for tenders for offshore wind energy in France, these projects will
strengthen the company’s ambitious industry plans already agreed with Alstom. By taking up this challenge, WPD
Offshore France is utilising its local expertise and knowledge of offshore wind energy to propose viable projects that
will help create a new industry in France and bolster regional development.
LOCATIONS
Paris, Nantes.
SUPPLIERS
W
128
WIND POWER
INDUSTRY
SUPPLIERS AND
SUBCONTRACTORS
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SUPPLIERS
3
3E FRANCE
Engineering office and independent consultant
1 rue du poids de l’huile, 31000 Toulouse
+33 (0)5 81 18 07 70
+33 (0)5 81 18 07 71
www.3e.eu [email protected]
ORGANIZATION
3E is an international engineering office specialising in renewable energy, energy efficiency, and sustainable management
of energy consumption (electrical grids, processes, sites, etc.) 3E advises and assists clients throughout the development
and operation of projects. 3E also has an R&D cell and develops high-performance, online monitoring software. The
company employs around a hundred people and has offices in Toulouse, Brussels, Istanbul, Beijing, and Cape Town.
ACTIVITIES
• Onshore and offshore wind farms: Feasibility, measurement of wind resources, analysis of production potential, design
and optimisation of wind farms, wind power development zones, connection studies, second opinions, operational
monitoring (production and maintenance), and autonomous and hybrid systems.
• Photovoltaic:Technical, economic, and administrative feasibility, project management for the preparation of an entire
project, second opinions, and monitoring and analysis of system performance using specialised SynaptiQ Solar software.
• Thermal solar: Feasibility, production potential, design and optimisation of installations, expert assessment and
project management.
• Energy in buildings and green neighbourhoods: Design of very high performance energy sites and energy-positive
sites, renewable energy feasibility studies, dynamic thermal simulations of buildings, project management support
for High Quality Environmental standards, and energy audits.
• Applied research and innovation in photovoltaic power and power grid connection.
LOCATIONS
Midi-Pyrénées.
130
PARTNERS
Your renewable energy production system under the protection of our expertise
45 rue Merlot - Zone d’activité la Louvade, 34130 Mauguio +33 (0)4 67 29 74 43
+33 (0)6 72 66 80 97 www.8p2.fr [email protected]
BUSINESSES SELECTED
8.2 FRANCE
The Group has offered its multidisciplinary competences in the Renewable Energy domain since 1995. Today, 95% of
8.2 France’s turnover is generated in the wind energy business with a turnover of 1 million € in 2013.
We offer to our customers monitoring and supervising packages by experts, at any stage of completion, from planning,
financing, as well as construction and operation, up to plants dismantling.
Our services consist of integrated solutions, and a complete system, based on various components, which allow
completing a project successfully:
Technical inspections and supervision
• spot or online vibration monitoring with analysis
• video-endoscopy
• predictable maintenance analysis
• blade inspection on rope or cherry picker
• various measurements: insulation, soil, mechanical displacement etc.
• expertise on composite materials
Due Diligence and Consulting
• support contract negotiation
• supervision of technical documents and legal support
• evaluation of expertise reports
Construction
• support to wind farm owners
• construction supervision
• approval/take-over of various project milestones
• punchlist clearance follow-up
LOCATIONS
MANUFACTURERS
ACTIVITIES
8.2 France is a subsidiary of 8.2 Consulting AG, a German Group of experts in the Renewable Energy. The dynamic
French team, consisting of nine employees, is supported by a large network of engineers and experts from the 8.2
Group, achieving specific missions or to reinforce the team in case of a punctual excessive demand. The company
counts 24 independent offices including its subsidiaries abroad, and keeps growing nationally and internationally.
TRAINING CENTRES
ORGANIZATION
131
SUPPLIERS
Germany, France, Portugal, Austria.
8
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Products and services for energy and automation technology
3 avenue du Canada - Immeuble Athos, 91978 Courtaboeuf
+33 (0)1 64 86 88 00
+33 (0)1 64 86 98 00
www.abb.fr [email protected]
ORGANIZATION
ABB is a world leader in energy and automation technologies with activities in five main areas: energy products, energy
systems, automation products, process automation, and robotics.
ACTIVITIES
ABB offers both asynchronous and synchronous generators for wind turbines.Tailored to each client’s specifications, ABB’s
generators use technology that has been tested and shown to be reliable in other motor and generator applications, in
particular in permanent magnet technology. The Energy Products and Systems unit designs and supplies substations
and high-voltage switches adapted to the wind power market.
LOCATIONS
Throughout France.
SUPPLIERS
MANUFACTURERS
ABB
A
132
PARTNERS
Wind power / Renewable energy maintenance
10 rue Jules Verne - Z.A. de l’Orée du Golf, 59790 Ronchin
+33 (0)3 20 41 55 70
+33 (0)3 20 41 55 71
www.acces-difficiles.com contact@acces-difficiles.com
ORGANIZATION
Head office in Ronchin (59790).
Office ADS Picardy: 4 Rue de la Tour Roland in Lassigny (60310).
ACTIVITIES
MANUFACTURERS
Backed by its experience in assembly and preventive and corrective maintenance, ADS carries out operations on
your wind parks and installations (assembly, inspections, monitoring, diagnoses, handling of emergencies) as part
of HSE organisation.
ADS is MASE-certified and offers services focusing on quality performance and feedback in a strict safety environment.
TRAINING CENTRES
BUSINESSES SELECTED
ACCES DIFFICILES SERVICES
LOCATIONS
133
SUPPLIERS
Nord-Pas de Calais, Picardy.
A
PARTNERS
BUSINESSES SELECTED
ACOEM, 01DB-METRAVIB SAS
Predictive maintenance
200 chemin des Ormeaux, 69578 Limonest cedex
+33 (0)4 72 52 48 00
+33 (0)4 72 52 47 57
www.acoemgroup.com [email protected]
MANUFACTURERS
TRAINING CENTRES
ORGANIZATION
OneProd is a brand owned by ACOEM.
ACOEM expertise is based on acoustic and vibration technology. The company has been growing for 40 years thanks
to its innovations in the fields of industry, the environment, and defence.
Its areas of expertise are threefold for lasting reliability:
• Monitoring, through predictive maintenance and quality or performance surveillance systems
• Diagnostics and related recommendations to evaluate and adjust designs or prevent production failures
• Solutions, using dedicated tools, co-design development and systems that help clients meet their objectives in
terms of reliability, quality, and comfort.
ACTIVITIES
The OneProd Wind System was designed as a simple, robust solution for reliable upstream detection of mechanical
and electrical failures in wind turbines.
The OneProd Wind System has proven, innovative features reinforced by specific analysis methods, for unrivalled
reliability in the monitoring of the wind turbine’s various elements including the turbine’s very slow moving main
bearing, the gearbox, and the generator.
The OneProd Wind System: 3 key points for non-stop productivity:
• Reliable monitoring
Why: No time wasted with false alarms.
How: By including trigger conditions for similar measurements.
• Intelligent parameters like ShockFinder
Why: To efficiently monitor wind turbines, from the main shaft to the generator.
How: By creating appropriate parameters specific to wind turbines.
• Extended analysis capabilities
Why: For reliable, robust diagnostics.
How: By integrating powerful, ergonomic analysis software based on industry experience.
LOCATIONS
SUPPLIERS
Alsace, Lower Normandy, Île-de-France, Nord-Pas de Calais, Provence-Alpes-Côte d’Azur.
A
134
PARTNERS
BUSINESSES SELECTED
ACROPHOTO
Supply and installation of turnkey met masts
42 avenue du 8 mai 1945, 38130 Echirolles
+33 (0)950 704 705
+33 (0)955 704 705
www.acrophoto.com [email protected]
ACROPHOTO possesses unique expertise, offering comprehensive solutions for all your needs.
Our structures are inspected by APAVE and VERITAS and can withstand even the harshest conditions.
Our strict standards and patented bases guarantee the quality of your measurements.
ACTIVITIES
ACROPHOTO installs, inspects, and maintains several dozen met masts across Europe for the main renewable energy
developers and producers.
Activities, products, and services:
• Design, manufacture, and installation of turnkey met masts from 3 to 100 metres tall
• Consulting and project assistance to meet even your most specific needs
• Preventive and corrective maintenance for met masts
• Installation of measuring instruments and aircraft warning lights
• Aircraft warning lights for wind turbines
• Installation and inspection of safety equipment
• Installation of solar met masts to conduct research for photovoltaic projects
MANUFACTURERS
TRAINING CENTRES
ORGANIZATION
ACROPHOTO is located in Rhône-Alpes but its employees travel anywhere throughout France and Europe.
Its Polish subsidiary was formed in 2010 to better serve development projects in Eastern Europe.
135
SUPPLIERS
LOCATIONS
A
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
ACTEMIUM
SUBSIDIARY OF VINCI-ENERGIES-
Electricity and industrial data processing
22 rue Gaston Planté - ZI de Kergaradec - BP 70076, 29802 Brest cedex 9
+33 (0)2 98 34 64 00
+33 (0)2 98 42 32 22
www.actemium.com/brest [email protected]
ORGANIZATION
Actemium executes electrical and industrial data processing studies. It operates in workshops or on-site. Onshore and
offshore operations (for oil platforms). Maintenance.
ACTIVITIES
LOCATIONS
Brittany, Finistère.
SUPPLIERS
MANUFACTURERS
Electricity and industrial data processing. Power plants, wind farms. Electrical and fibre optics networks. Industrial data
processing: automation, human-machine interfaces, supervision, databases, traceability.
A
136
PARTNERS
SUBSIDIARY OF VINCI-ENERGIES-
New constructions and maintenance
24 route de Fort-Mardyck - BP 70004, 59430 Saint-Pol-sur-Mer
+33 (0)3 28 26 73 91
+33 (0)3 28 25 96 10
www.actemium.com [email protected]
ORGANIZATION
The VINCI Energies group is present worldwide and has a structure with over 800 companies in Europe.
ACTIVITIES
Manufacture and assembly of metal structures, walkways, and control and process booths. Electricity, automation,
mechanics, and instrumentation. Maintenance of wind turbines at Total’s Dunkirk site. Wind turbine assembly for individuals.
MANUFACTURERS
LOCATIONS
TRAINING CENTRES
BUSINESSES SELECTED
ACTEMIUM DUNKERQUE
137
SUPPLIERS
Nord-Pas de Calais, Picardy.
A
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SUPPLIERS
A
AGRAFE ENR
SUBSIDIARY OF THE BEMORE GROUP-
Employment agency for fixed-term and permanent contracts and temporary work
Technolac BP371 - 19 rue du lac Saint-André, 73372 Le Bourget-du-Lac cedex
+33 (0)4 79 44 03 51
+33 (0)4 79 44 03 52
www.agrafe.fr [email protected]
ORGANIZATION
Agrafe EnR is an employment agency specialising in hiring and deploying personnel for positions in the wind power
industry. Six full-time staff manage a team of over 400 technicians recruited from all over France.
ACTIVITIES
To date, Agrafe EnR has supplied 500,000 hours of work in the wind power industry and provides technicians for:
• assembly
• electrical maintenance
• preventive and corrective maintenance
• inspections
Agrafe EnR has helped companies hire more than 100 employees for jobs as diverse as mast-fitter, team leaders,
maintenance technicians, supervisors, commissioning, and project managers.
LOCATIONS
Agrafe EnR has two management centres: one located in “Solar Valley” in Technolac in Savoie, and one in Lausanne
in Switzerland.
Our technicians are recruited from around the country and work in France and throughout Europe.
Belgium, Germany, Austria, Switzerland, Italy, Portugal, Sweden, UK, etc.
138
PARTNERS
BUSINESSES SELECTED
AINELEC
Manufacture of inverters
ZI de la Boitardière, rue Ernest Mabille, 37400 Amboise
+33 (0)2 47 23 67 67
+33 (0)2 47 23 67 60
www.ainelec.com [email protected]
ACTIVITIES
Ainelec’s conversion products (inverters, chargers, and converters) are interfaced between the source (solar, hydroelectric or
wind) to which a backup can be added (such as a genset) and the application (lighting, communication, refrigeration, etc.)
Our recognised expertise in converters used for renewable energy such as wind and solar, has led us to develop
innovative products for fuel cells.
LOCATIONS
139
SUPPLIERS
Centre.
MANUFACTURERS
Ainelec is part of the HAP group (€5.6 billion). Since 1990, it has been specialising in the design and production of
low- and medium-power “smart” electronic products. It has an engineering office staffed by engineers and technicians
who work closely with the production unit for total command of our products. The company is ISO 9000:2000 certified,
so our partners can be assured of the quality of the production and maintenance studies carried out on our products.
Ainelec is the only French company that manufactures grid-connected inverters.
TRAINING CENTRES
ORGANIZATION
A
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SUPPLIERS
A
ALIOS INGENIERIE
SUBSIDIARY OF ALIOS GROUP-
Geotechnical and geological engineering
26 avenue Ferdinand de Lesseps - ZAC Actipolis, 33610 Canéjan
+33 (0)5 57 35 41 90
+33 (0)5 57 35 41 91
www.alios-eolien.com [email protected]
ORGANIZATION
ALIOS Ingénierie is a subsidiary of ALIOS.
It is an SARL (limited liability company) with capital of €40,000.
Total number of employees: 60, including 16 engineers, 10 technicians, 27 surveyors, and 7 administrative staff.
ACTIVITIES
Founded in 1995, ALIOS Ingénierie is a geotechnical engineering office acknowledged for its soil and subsoil surveys.
In 2003, ALIOS Ingénierie decided to become involved in the development of alternative energy, creating a department
exclusively for wind power. This strategic decision has helped it gain extensive experience in the field to become one
of the top soil engineering offices in wind generator construction.
ALIOS Ingénierie conducts surveys for 150 to 200 wind power foundations in France every year. It also conducts
numerous surveys abroad (in Turkey, Morocco, and Poland, among others).
ALIOS Ingénierie works on all aspects of geotechnical surveys, including:
• In situ reconnaissance work conducted by drilling and testing teams in powerful, high-performance workshops
• Laboratory testing on samples
• Geotechnical surveys that follow the sequencing of geotechnical tasks required by standard NF P 94-500:
- Preliminary geotechnical surveys of a site
- Pre-project geotechnical surveys
- Geotechnical surveys for projects
- Geotechnical surveys for execution and monitoring
- Geotechnical supervision during execution
- Geotechnical diagnostics
LOCATIONS
Originally located in the southwest of France, ALIOS Ingénierie now has nine offices across France: Bordeaux, Biarritz,
Dijon, Héricourt, Niort, Périgueux, Tarbes, Toulouse, and Valence. The offices are located near wind turbine construction
zones for better responsiveness and more efficient supervision of construction sites.
ALIOS Ingénierie abroad: In 2011, the company opened an office in Poland called ALIOS Polska. Created in partnership
with a Polish geotechnical engineering office, ALIOS Polska has already conducted numerous geotechnical surveys,
in particular for the wind power industry.
140
PARTNERS
BUSINESSES SELECTED
Geotechnical studies:
The solid
Geotechnical studies and dia
gnos
tics
ı
Hydroge
ology
ı
TRAINING CENTRES
foundation guarantee
Expertise
Your projects deserve
full attention…
and the best skills!
MANUFACTURERS
A network of wind turbine specialists
The particularity of ALIOS Ingénierie Company is the
creation of a special wind turbine department.
Furthermore, always the same persons, enjoying several
years of experience, treat and assess the data: these
are wind turbines specialists.
ı A network of 10 agencies in France ı Means in men and material
ı Expertise that has proven ı Expertise that exports
Z AC Actipolis - 26, avenue Ferdinand WINDUSTRY
de Lesseps
33610
CANEJAN
- FRANCE
FRANCE-- THE
FRENCH WIND
POWER INDUSTRY
2014
141
Phone +33 5 57 35 41 90 - Fax +33 5 57 35 41 91 - eolien @ alios.fr
www.alios.fr ı www.alios-eolien.com
© SERVICE COMMUNICATION GROUPE ALIOS.
ALIOS Ingénierie :
SUPPLIERS
supervision…
ı In Situ tests ı Laboratory tests ı Advice, geotechnical feasibility
studies ı Execution studies ı Execution monitoring ı Geotechnical
X
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Preventive and corrective maintenance
44 bis avenue de Gerbéviller, 54300 Lunéville
+33 (0)3 83 73 15 15
+33 (0)3 83 76 39 95
www.your-energy-solution.com [email protected]
ORGANIZATION
The Alliance Lorraine Maintenance Energies Alternatives (ALMEA) is an economic interest grouping formed in 2010 by
three complementary companies already offering various services for the wind power industry. By joining forces, ALMEA
was able to form a 180-person team to provide more comprehensive solutions for the maintenance of wind farms.
ACTIVITIES
• Turnkey CMS solutions for predictive maintenance
• Global preventive maintenance and blade inspection
• Corrective maintenance and blade repair
• All types of rope access work: painting, sanding, interior and exterior cleaning, etc.
• Inspection of safety equipment
• Training in suspended access and rescue at heights
LOCATIONS
Lorraine, Grand Est.
SUPPLIERS
MANUFACTURERS
ALMEA
A
142
PARTNERS
Special transport, lifting, assembly, and maintenance
Rue du Moulin Neuf, 85800 Le Fenouiller
+33 (0)2 51 55 54 07
+33 (0)2 51 54 30 11
www.altead.com www.augizeau.online.fr [email protected]
ORGANIZATION
The company currently has 2,400 employees. In 2011, the AltéAd group achieved a turnover of €250 million.
The head office of the AltéAd group is located near Nantes.
ACTIVITIES
Special transport, handling, and lifting.
Assembly, transmission, maintenance, wind power sector. AltéAd is a multi-activity company providing transport, lifting,
assembly, and maintenance services for wind turbines in France and worldwide.
MANUFACTURERS
LOCATIONS
TRAINING CENTRES
BUSINESSES SELECTED
ALTEAD
143
SUPPLIERS
60 locations in France and abroad. Morocco, Belgium, Italy, Poland, Switzerland.
A
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
ANDRE LAURENT
Manufacture of specially designed mechanical fastener components
ZI de Bayon, 42150 La Ricamarie
+33 (0)4 77 59 32 80
+33 (0)4 77 80 62 64
www.andre-laurent.fr [email protected]
ORGANIZATION
The company has 131 employees. Its head office is in Loire.
ACTIVITIES
André Laurent designs and produces fasteners and connectors by hot forging, machining, thread rolling, nuts and
bolts, and special screws for the energy sector. It is an expert in working with metals such as low-alloy steels, stainless
steels, tool steels, superalloys, titanium, nickel, copper, aluminium, and cobalt.
Rhône-Alpes and Île-de-France.
SUPPLIERS
MANUFACTURERS
LOCATIONS
A
144
PARTNERS
Engineering office
Immeuble AXEO29 - Avenue Aristide Briand - CS 10006, 94117 Arcueil cedex
+33 (0)1 57 63 14 00
+33 (0)1 57 63 14 01
fr.anteagroup.com/fr [email protected]
ORGANIZATION
Antea Group has 3,000 employees and experts worldwide, more than 550 being in France.
ACTIVITIES
Engineering project management, expertise in the areas of Infrastructure, Environment, Water, Urban planning more
than 1,000 wind turbines since 2004.
TRAINING CENTRES
BUSINESSES SELECTED
ANTEAGROUP
LOCATIONS
145
SUPPLIERS
MANUFACTURERS
20 locations in France, the Antilles, Guiana, Reunion, and around the world.
A
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Manufactures and sells rubber-based anti-vibratory solutions for the railway, energy,
water, military markets as well as industrial applications
Usine des Caillots - BP01, 58302 Decize cedex
+33 (0)3 86 77 31 09
www.anvisindustry.com [email protected]
ORGANIZATION
Anvis Industry are constantly looking for customerspecific solutions and using their R&D resources for the benefit
of their clients and promote innovation (rubber with low creep, compensation system, complete assemblies, largedisplacement expansion joints, resistance, ...).
ACTIVITIES
Anti-vibratory mounts, designed on demand, are used to reduce vibration and mechanical noise in all industrial sectors
(transport, energy, navy, etc.).
Expansion joints under the brand name Dilatoflex® are renowned worldwide and equip all kinds of pipe systems
exposed to high-temperature or vibrations.
LOCATIONS
Burgundy.
SUPPLIERS
MANUFACTURERS
ANVIS INDUSTRY
A
146
PARTNERS
9,800 employees, including 7,000 engineers and technicians. €763.9M in turnover in 2012. 130 offices across France.
47 locations abroad. 143 training sites. 31 test laboratories and centres.
ACTIVITIES
Apave strives to control risk using its comprehensive offer of quality technical and intellectual services: inspections,
buildings, testing and measurements, training, and advice. All our services aim to keep people and property safe and
protect the environment. They apply to all areas of activity: electricity, automation, pressurised equipment, construction
supervision, non-destructive testing, energy control and management, construction equipment (lifting, handling,
machines), construction and civil engineering, the environment, fire prevention, and health and safety.
Its work in renewable energy includes:
• Technical inspections of construction and civil engineering
• Risk prevention at work sites and during operation
• Operations safety (equipment reliability, machine safety, safety reports, etc.)
• The environment (impact studies, noise studies and measurements)
• Acceptance (initial verifications, performance measurements, etc.)
• Assistance in operation and maintenance (non-destructive testing, measurements of energy and mechanical
performance, inspections, diagnostics, etc.)
LOCATIONS
All of France.
147
MANUFACTURERS
ORGANIZATION
191 rue de Vaugirard, 75015 Paris
+33 (0)1 45 66 99 44
+33 (0)1 45 67 90 47
www.apave.com [email protected]
SUPPLIERS
Assists companies and local authorities in the control of
technical, environmental, and human risks
TRAINING CENTRES
BUSINESSES SELECTED
APAVE
A
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
SUBSIDIARY OF SOFIPLAST-
Application of innovative coatings
Parc d’entreprises - Les Portes de l’Artois Plantin, 62190 Lilliers
+33 (0)3 21 54 10 77
+33 (0)3 21 54 10 78
www.sofiplast.fr [email protected]
ORGANIZATION
Sofiplast: around 100 employees.
Engineering office (Rhône), management (Rhône) and technical management, methods and production (Pas-deCalais), project managers (Pas-de-Calais).
ACTIVITIES
Application of innovative surface coatings and treatments, including fluoropolymers, resins, and LAM’LCOAT for
lubrication, anti-corrosion, anti-adherence, and anti-fouling purposes on turbines, masts, composite structures, and more.
Metal boilermaking for mast construction.
LOCATIONS
Nord-Pas de Calais, Rhône-Alpes.
SUPPLIERS
MANUFACTURERS
APPLISURFACES
A
148
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
ƉƉůŝ^ƵƌĨĂĐĞƐ
ZsdDEd^^W/hy
Η>ĞƐWŽƌƚĞƐĚĞů͛ƌƚŽŝƐΗͲWůĂŶƟŶͲϲϮϭϵϬ>/>>Z^
dĠů͗нϯϯ;ϬͿϯ͘Ϯϭ͘ϱϰ͘ϭϬ͘ϳϳ
&Ăǆ͗нϯϯ;ϬͿϯ͘Ϯϭ͘ϱϰ͘ϭϬ͘ϳϴ
ͲŵĂŝů͗ĐŽŵŵĞƌĐŝĂůΛĂƉƉůŝƐƵƌĨĂĐĞƐ͘Ĩƌ
ϰŵĂũŽƌƉŽůĞŽĨĐŽŵƉĞƚĞŶĐĞ͗
^hZ&^&hEd/KE>/d/KE
^ƚĂŶĚĂƌĚĐŽĂƟŶŐƐͬŝŶŶŽǀĂƟǀĞĐŽĂƟŶŐƐ
Ed/͗&Z/d/KE^>/W͕,^/KE͕Z^/KE͕KZZK^/KE͕'>>/E'͕tZ͕^,K<͕
Kyŝd/KE͕d,ZD>Ͳ>dZ/>/E^h>d/KE͕^>/E'͕Wd,/E'͙
^dZ/WW/E'WZK^^t/d,K>K'/>D/^
MANUFACTURERS
ƵƐƚŽŵͲŵĂĚĞ
^dZ/WW/E'ĂŶĚ>E/E'KEÊ^/d/s^h^dZd^
s>KWDEdE/DW>DEdd/KEKE^/d
ĞƐŝŐŶ͕ĞǀĞůŽƉŵĞŶƚĂŶĚŝŵƉůĞŵĞŶƚĂƟŽŶŽŶͲƐŝƚĞŽĨƐƵƌĨĂĐĞĞŶŐŝŶĞĞƌŝŶŐƉƌŽĐĞƐƐĞƐ
ƚŽŽƉƟŵŝǌĞƐŽůƵƟŽŶĨŽƌzKhZďƵƐŝŶĞƐƐĂŶĚzKhZĞŶǀŝƌŽŶŶĞŵĞŶƚ
K/>ZD</E'
WƌŽĚƵĐƟŽŶŽĨƉĂƌƚƐŽƌŝŶĚƵƐƚƌŝĂůĂƐƐĞŵďůŝĞƐĨƌŽŵƉůĂŶƐ͗
dĂŶŬƐ͕ďƌŝĚŐĞƐ͕ĨƌĂŵĞ͕ŵĂĐŚŝŶĞĨƌĂŵĞƐ͕ǁŽƌŬďĞŶĐŚĞƐ͙
149
SUPPLIERS
ǁǁǁ͘ƐŽĮƉůĂƐƚ͘Ĩƌ
X
PARTNERS
BUSINESSES SELECTED
ARCADIS
Geotechnical surveys
y and foundations
9 avenue Réaumur, 92354 Le Plessis-Robinson cedex
+33 (0)1 46 23 77 77
+33 (0)1 46 01 35 80
www.arcadis-fr.com [email protected]
TRAINING CENTRES
ORGANIZATION
Arcadis is an international group that provides services in project management, consulting, and engineering to improve
mobility, sustainable development, and quality of life.
Arcadis develops, conducts studies, implements, and manages projects in the fields of infrastructures, buildings, and
the environment.
Arcadis France: 600 employees with 10 regional offices; developing from the merger of 3 well-known companies:
Europe Etudes Gecti, Simecsol, and Gester.
MANUFACTURERS
ACTIVITIES
Thanks to its multidisciplinary teams, Arcadis offers services for fields where geotechnics are directly applicable (such as
geological engineering or the mechanics of soil and rocks), as well as for applications related to the design, execution,
supervision, and even consolidation of structures where the behaviour of the ground is crucial. In geotechnics, as the
part which is known is always limited due to the random nature of the formation of the subsoil, Arcadis provides expert
analysis of geotechnical risks for all projects, regardless of the stage of design or execution.
LOCATIONS
SUPPLIERS
The company has 10 offices in the following regions: Île-de-France, Nord-Pas de Calais, Rhône-Alpes, Provence-AlpesCôte d’Azur, Pays de la Loire, Brittany, Languedoc-Roussillon, and Alsace.
A
150
PARTNERS
SUBSIDIARY OF AREVA-
Maintenance
27 rue de l’Industrie - BP 189, 59573 Jeumont cedex
+33 (0)3 27 69 90 00
+33 (0)3 27 56 33 90
www.areva.com [email protected]
ORGANIZATION
AREVA NP - Etablissement de Jeumont is a subsidiary of the Areva group specialising in the manufacture of mobile
power plant equipment (pumps and mechanisms) and maintenance and operation of wind farms.
TRAINING CENTRES
BUSINESSES SELECTED
AREVA NP - ETABLISSEMENT DE
JEUMONT
Nord, Drôme, Aude, Côtes-d’Armor.
151
LOCATIONS
SUPPLIERS
Areva NP specialises in the manufacture of mobile equipment (pumps and mechanisms) for nuclear power plants
and the maintenance and operation of wind farms.
With a background in manufacturing J48 wind turbines and 10 years of experience in wind farm manufacturing,
assembly, and operation projects, Areva NP offers comprehensive management for your installations, including:
• Complete maintenance of wind farm sites
• Wind farm operation and management, including remote monitoring and installation resets
• Technical audits of wind farms and machines
• Coordination of external companies and HSE management for a site
• Improving machine reliability
• Design, installation, and operation of CMS gearboxes, generators, etc.
• Revamping
• Training in wind power technology and specialities
MANUFACTURERS
ACTIVITIES
A
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
ARTELIA EAU ET ENVIRONNEMENT
Engineering specialists
6 rue de Lorraine, 38130 Echirolles
+33 (0)4 37 65 56 00
www.arteliagroup.com
[email protected]
ORGANIZATION
Artelia is an engineering group with multiple specialities. It is 100% employee-owned, guaranteeing independence
in the accomplishment of its assignments. Artelia is especially known for its expertise in renewable energy and
energy efficiency. It has all the all the technical and financial analysis skills it needs in-house to work on any stage of
renewable energy projects, including diagnostics, feasibility studies, project management, regulatory studies, audits,
and due diligence.
SUPPLIERS
MANUFACTURERS
ACTIVITIES
A
Artelia helps develop hydroelectric projects, photovoltaic power plants, thermodynamic solar power plants, wind
farms, and hydro-kinetic power plants. It integrates the exploitation of geothermal, biogas and biomass resources
and creates innovations in marine energy. Artelia provides and implements solutions to improve the energy efficiency
of buildings, industrial sites, and public facilities, develops strategies to reduce greenhouse gas emissions, evaluates
the vulnerability and impacts of climate change and offers strategies for adjustment.
LOCATIONS
ARTELIA has 35 locations in France and 75 worldwide over 35 countries.
Jérôme MERCIER - Branche Reneable energy
Tel. : 04 37 65 56 00 - [email protected]
Sébastien LEDOUX - Marine energy
Tel. : 02 28 09 18 49 - [email protected]
152
PARTNERS
AAA perfoms for more than 20 years, all technical services (production, quality, industrialization) on sets often substract
on custumers’ site and in our unit of Tarbes. We operate in the fields of aviation, nautical and rail according to custumer
contracts in France and abroad, with dedicated teams constituted and managed by AAA.
ACTIVITIES
AAA, through its 2,000 formed and experimented employees, has the capacity to provide our custumers with the
flexibility and reactivity in their development while ensuring compliance with quality requirements, skills’ reliability
and staff’s qualifications.
AAA operates in the following main domains:
• Manufacturing of subset in composite and in metal/composite
• Assembly structure, electricity and system
• Controllers, Inspectors, Quality control managers, NDT Experts
• Technical Assistance, Logistics and Technical Supports for the production
• Creation of “work packages”
LOCATIONS
We are located in the north of France, the West, Bordeaux, Toulouse, Trabes, the South East, Central and Paris.
We have got also sites in Germany, in Morocco, in Canada, in China and Philippines.
153
MANUFACTURERS
ORGANIZATION
10 rue Mercoeur, 75011 Paris
+33 (0)1 48 06 85 85
+33 (0)1 48 06 32 19
www.aaa-aero.com [email protected]
SUPPLIERS
Technical services on custumers’ sites or in our unit of Tarbes
TRAINING CENTRES
BUSINESSES SELECTED
ASSISTANCE
AERONAUTIQUE ET
AEROSPATIALE
A
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
ATV
Blade manufacture
CD3, 83560 Rians
+33 (0)4 94 78 35 38
+33 (0)4 94 80 94 67
atv.tm.free.fr [email protected]
ORGANIZATION
ATV was founded in 1988 under the name Atout Vent and initially produced small, carbon wind turbine blades.
ACTIVITIES
Design and manufacture of wind turbine blades.
LOCATIONS
SUPPLIERS
MANUFACTURERS
A
154
PARTNERS
Assembly of wind measurement towers
7 rue de l’industrie - Bâtiment A - ZI de Vic, 31320 Castanet Tolosan
+33 (0)6 79 47 68 63
+33 (0)5 61 54 06 42
[email protected]
ORGANIZATION
SARL (French limited liability company) - 7 employees.
ACTIVITIES
Assembly of wind measurement towers. Instrumentation for operation towers. Sales of equipment. Sunshine measurement
stations. Sixteen years of experience.
TRAINING CENTRES
BUSINESSES SELECTED
AUTAN ENVIRONNEMENT
LOCATIONS
155
SUPPLIERS
MANUFACTURERS
Midi-Pyrénées, Languedoc-Roussillon, and Brittany (Toulouse/Montpellier/Vannes).
A
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
AVENISENSE
Design, manufacture, and sale of measurement instruments and related products
and services
Savoie Technolac - 17 allée du Lac Léman, 73374 Le Bourget-du-Lac
+33 (0)4 57 08 02 25
+33 (0)4 57 08 02 25
www.avenisense.com [email protected]
ORGANIZATION
Avenisense is a group of experts specialising in the design and manufacture of microsensors for the instantaneous
analysis of fluids. Avenisense is active in the fields of chemistry, refining, energy, and maritime transport and works
with both laboratories and industrials. Using its innovative measurement systems, Avenisense helps clients increase
the profitability of their industrial processes, perform more detailed and more flexible quality controls, and monitor
the health or rotating machines. Avenisense’s technologies are suitable for both fixed and on-board applications and
for harsh environments.
ACTIVITIES
Avenisense is the leader in on-board lubricant monitoring, thanks to its Cactus® line, featuring in situ systems that
diagnose oil quality. With Cactus®, you can reduce maintenance costs while improving wind farm output by monitoring
the physicochemical properties of lubricants in real time. By analysing viscosity, temperature, water activity (relative
humidity), and particulates, you can anticipate maintenance stoppages, reduce the risk of failures, and adjust the load
of your installations based on their age. In short, you can control what happens inside your wind turbines.
SUPPLIERS
LOCATIONS
A
All of France.
156
PARTNERS
Special transport and lifting
82 avenue Didier Daurat – BP80564, 64010 Pau cedex
+33 (0)5 59 32 15 58
+33 (0)5 59 62 15 56
www.ayala.fr [email protected]
ACTIVITIES
Ayala is a player in the transport sector, including special transport, lifting, factory transfers, handling, and storage. It
owns special equipment for transporting wind turbine nacelles, blades, and masts.
LOCATIONS
157
SUPPLIERS
MANUFACTURERS
Midi-Pyrénées and Île-de-France.
TRAINING CENTRES
BUSINESSES SELECTED
AYALA
A
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
BATTERIES GLOBAL SERVICES
Design, installation and maintenance (on/offshore) of industrial battery packs
6b rue de l’Elorn, 29400 Landivisiau
+33 (0)2 98 24 99 38
+33 (0)2 98 46 91 04
www.batteries-global-services.com [email protected]
ORGANIZATION
Founded in 2005, BGS specialises in supplying, installing, and maintaining industrial batteries.
ACTIVITIES
All types of fixed and mobile industrial batteries (lead-acid, NiCad, and lithium), technical accessories and equipment
(chargers/converters, remote surveillance, accessories), and on-site and in-workshop maintenance.
SUPPLIERS
MANUFACTURERS
LOCATIONS
B
158
PARTNERS
Manufacture of wind turbine masts - Transport of wind turbine parts
60 rue de la Brosse, 45110 Chateauneuf-sur-Loire
+33 (0)2 38 46 38 46
+33 (0)2 38 46 38 47
www.baudinchateauneuf.com [email protected]
ORGANIZATION
Located near Orléans, Baudin Châteauneuf has been a steel construction company for 90 years. In 2007, it began
manufacturing masts and foundation components. Its subsidiary, STEX, provides special transport for wind turbine
components (e.g. towers, nacelles, blades) from its workshops in Châteauneuf-sur-Loire or from any other manufacturing
plant or unloading port to construction sites.
ACTIVITIES
TRAINING CENTRES
BUSINESSES SELECTED
BAUDIN CHATEAUNEUF
MANUFACTURERS
Since 2007, Baudin Chateauneuf has made more than 200 foundation parts and 30 80-foot wind turbine towers. Its
goal is to be producing 40 masts and 80 foundation parts per year within two or three years.
LOCATIONS
159
SUPPLIERS
Centre.
B
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
BECK CRESPEL
SUBSIDIARY OF BECK INDUSTRIES-
Standard and specialised bolting
40 rue des Fusillés, 59280 Armentières
+33 (0)3 20 77 78 88
+33 (0)3 20 77 82 00
www.beckcrespel.com [email protected]
ORGANIZATION
Special connectors and mechanical components: Beck Crespel is a leading European manufacturer of connectors
for specific industries, including energy (wind, gas, hydroelectric and steam turbines), the nuclear industry and diesel
engines. Beck Crespel also makes connectors for the petrochemicals industry (offshore platforms), the engineering
industry and equipment (public works and construction).
Special connectors for the wind power industry: offshore wind farms, turbines, parts with high tensile strength, double-end
studs, studs for all threaded parts, forged parts, heavy hex nuts with high tensile strength, screws, anchor bolts, and studs.
LOCATIONS
Nord-Pas de Calais.
SUPPLIERS
MANUFACTURERS
ACTIVITIES
B
160
PARTNERS
Earthworks and foundation work
Rue du Moulin - BP 26, 55320 Dieue-sur-Meuse
+33 (0)3 29 87 60 70
+33 (0)3 29 87 73 45
www.berthold-btp.com [email protected]
ORGANIZATION
Berthold is the Grand Est subsidiary of the Baudin Chateauneuf group.
ACTIVITIES
Berthold is comprised of several business departments: the structural engineering department, the general business
department, the metal bridges department and the metal frames department. Each of these departments has its own
engineering office. Berthold also has an equipment and transport service, an administration service, and a workshop
dedicated to steel construction. Since 2006, Berthold has been constructing concrete wind turbine foundations, as
well as access tracks and access platforms for wind turbine assembly.
LOCATIONS
161
SUPPLIERS
Lorraine.
MANUFACTURERS
SUBSIDIARY OF BAUDIN CHATEAUNEUF-
TRAINING CENTRES
BUSINESSES SELECTED
BERTHOLD
B
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
BEUZIT FRANCOIS SARL
SUBSIDIARY OF BREMAT GROUP-
Travaux de terrassement et fondations
CS 57839, 29678 Morlaix cedex
+33 (0)2 98 88 73 26
+33 (0)2 98 88 70 22
www.beuzit.fr [email protected]
ORGANIZATION
Beuzit François is a subsidiary of the Bremat group, which currently works in four trades related to public works and
industrial bodywork.
ACTIVITIES
LOCATIONS
Brittany. Morbihan and Finistère.
SUPPLIERS
MANUFACTURERS
Beuzit François is a specialist in the mechanised laying of cables and HDPE throughout France. The company works
with high-speed networks, buries cables for MV networks, and connects wind turbines.
B
162
PARTNERS
Port logistics
Zone portuaire de Mielles - BP 161, 50110 Tourlaville
+33 (0)2 33 88 66 15
www.blp.bollore.com [email protected]
ORGANIZATION
With 18 offices in 15 of France’s main ports, BLP, a subsidiary of the Bolloré group, is one of the leaders in specialised
port handling in France. BLP’s 600 employees handle about 10 million tonnes of merchandise on the national market
for bulk (biomass, fertiliser, livestock feed, etc.), industrial projects (wind turbines, EPR, heavy packages), and other
conventional industries (wood, paper pulp, iron and steel, etc.)
BUSINESSES SELECTED
SUBSIDIARY OF BOLLORE GROUP-
TRAINING CENTRES
BLP (Bolloré Logistique Portuaire)
Over the past few years, BLP has developed a division specialising in port logistics and dedicated to wind farm
projects. The division has also been working for many months on the logistics problems relating to offshore wind
energy and hydro-kinetic power development in France. Thanks to its presence at 15 ports, including Cherbourg and
Saint-Nazaire/Montoir, and its partnerships with specialised transporters, lifting contractors and barge charters, BLP
is able to respond to any logistics problem related to MRE development. With significant storage capacities at each
port, BLP also transports biomass.
MANUFACTURERS
ACTIVITIES
LOCATIONS
163
SUPPLIERS
Nord-Pas de Calais, Normandy, Brittany, Pays de la Loire, Poitou-Charentes, Provence-Alpes-Côte d’Azur, and Île-de-France.
B
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
BMP
Plastic boilermaking and composite materials
ZAC de la Grande Plaine - 1 rue des Entrepreneurs, 14760 Bretteville-sur-Odon
+33 (0)2 31 26 66 21
+33 (0)2 31 26 70 93
www.bmp-chaudronnerie-plastique-composites.com [email protected]
ORGANIZATION
For more than 15 years, BMP has been manufacturing custom parts, individually or in very small numbers, for the
following industries:
• plastic boilermaking
• composite materials
Our production site currently has 14 employees qualified to work at height (N1/N2 CACES), including:
• 1 project manager
• 1 workshop manager
SUPPLIERS
MANUFACTURERS
ACTIVITIES
B
1) Plastic boilermaking: digital cutting, forming, thermoforming, marking
2) Composites:
• polyester, monolithic or sandwich on PVC foam or honeycomb structures
• carbon with an accuracy of 0.2 mm, resistant, rigid and light-weight
• machining to an accuracy of 0.05 mm for large-volume parts up to 6 x 2 x 3 metres
3) Construction sites: lamination, repairs, maintenance
Examples of our work:
• Protection for antennae, radomes, and markers
• Tubs, vats, and tanks
• Retention tanks and retention mats
• Housings, machine guards, covers
• Plumbing and ventilation
• Lamination of tubs and vats
• Plastification of floor and walls
LOCATIONS
Lower Normandy.
164
PARTNERS
Solutions for power transmission and movement control
13 rue Eugène Pottier – ZI Moimont II, 95670 Marly-la-Ville
+33 (0)1 34 47 45 10
+33 (0)1 34 68 88 00
www.bonfiglioli.fr fr01.btf@bonfiglioli.com
ORGANIZATION
Bonfiglioli Transmissions is the French subsidiary of the Italian leader in Bonfiglioli drive systems. Bonfiglioli offers
specific solutions for power transmission and movement control. The company has 75 employees, and its head office
and assembly plant are located in Marly-la-Ville, near Roissy.
ACTIVITIES
The third largest operator on the power transmission market, Bonfiglioli offers a complete range of geared motors,
drivetrains, and epicyclic gear motors constituting an integrated offer specific to each application. Bonfiglioli provides
solutions for the industrial and mobile sectors. For sustainable development and specifically the wind power industry,
we have a wide range of products dedicated to setting in motion the pitch, yaw, and drive in wind turbine installations.
LOCATIONS
165
SUPPLIERS
Head office: Marly-la-Ville.
Sales engineers throughout France.
A large network of distributors available across France.
MANUFACTURERS
SUBSIDIARY OF BONFIGLIOLI-
TRAINING CENTRES
BUSINESSES SELECTED
BONFIGLIOLI TRANSMISSIONS
B
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SUPPLIERS
B
BOSCH REXROTH
SUBSIDIARY OF BOSCH GROUP-
Solutions for power transmission and movement control
91 boulevard Joliot Curie, 69200 Vénissieux
+33 (0)4 78 78 52 52
+33 (0)4 78 78 68 90
www.boschrexroth.fr [email protected]
ORGANIZATION
Bosch Rexroth is one of the world’s leading specialists in drive and control technologies. Under the brand name of
Rexroth, the company supplies over 500,000 clients with custom drive, control, and movement solutions for industrial
applications and automation, mobile applications, and renewable energy. Bosch Rexroth is capable of adapting to the
specific needs and demands of each market. The Drive and Control Company, Bosch Rexroth, develops, produces, and
sells components and systems in over 80 countries. In 2011, the company in the Bosch group had close to €6.4 billion
in turnover and 38,400 employees.
ACTIVITIES
Since the beginning, Bosch Rexroth has been contributing to the technical development of wind turbines. It has become
an important partner and multi parts manufacturer through its hydraulics and gear offering. Bosch Rexroth has been
investing for several years and has created a division dedicated entirely to wind power grouping its know-how and
technological skills in three plants: two in Europe and one in China.
Wind turbine drivetrains face many challenges: variable wind loads, increasing power, small spaces, minimal mass,
and changing weather.To meet these challenges, Rexroth has developed comprehensive regulation, control, and safety
mechanisms specific to wind power applications and turbines.These include main gearboxes, slewing reduction gears,
hydraulic and electromechanical controls for regulating rotor blade pitch, central differentials, braking systems for the
main transmission, and slew brakes.
LOCATIONS
Geographical coverage throughout France.
Head office in Rhône-Alpes (Vénissieux).
Offices in the Paris area, Strasbourg, Lille, and Toulouse.
166
PARTNERS
103 boulevard Denfert-Rochereau - BP 77, 38502 Voiron cedex
+33 (0)4 76 05 22 36
+33 (0)4 76 65 75 28
www.fonderie-bot.fr [email protected]
ORGANIZATION
Société anonyme (Limited liability company) with an executive board.
ACTIVITIES
Fonderie BOT has been working for industry since 1913. It is a specialist in the production of individual parts or
small runs made of cast iron, EN-GJL, EN-GJS, haematite, or cast iron alloys (Ni-hard and Ni-resist) weighing 50 kg to
10 tonnes (max. 7 tonnes for EN-GJS) (up to 500 parts/year).
For the wind power industry in particular, Fonderie BOT can produce EN-GJS 400-18 LT type parts made of spheroidal
graphite cast iron resilient to low temperatures (e.g., hubs, blade roots, and shafts).
Fonderie BOT also offers stabilisation, painting, and machining services for ready-to-install parts.
Its tools range from simple polystyrene models for single parts to complex wood and resin tools for the production of
repetitive parts. Fonderie BOT is also available to perform feasibility and design studies for clients.
LOCATIONS
167
SUPPLIERS
Rhône-Alpes.
MANUFACTURERS
Cast iron
TRAINING CENTRES
BUSINESSES SELECTED
BOT FONDERIE
B
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
SUBSIDIARY OF VINCI CONSTRUCTION FRANCE-
Foundations
5 rue Ernest Flammarion - ZAC du Petit le Roy, 94550 Chevilly-Larue
+33 (0)1 49 61 48 00
+33 (0)1 49 61 48 01
www.botte-fondations.fr [email protected]
ORGANIZATION
Botte Foundations is a subsidiary of Vinci Construction France dedicated to special foundations.
ACTIVITIES
Botte Foundations is part of the Vinci Construction France group. It makes all types of special foundations: pile
foundations (all kinds), underpinning, micropile foundations, injection grouting, quarry work, anchors, diaphragm walls,
support, drilling, foundations for pylons and wind turbines.
LOCATIONS
Île-de-France, Rhône-Alpes, Provence-Alpes-Côte d’Azur, Nord-Pas de Calais, Ouest, Sud-Ouest, Alsace, Lorraine,
Champagne-Ardenne.
SUPPLIERS
MANUFACTURERS
BOTTE FONDATIONS
B
168
PARTNERS
Geotechnical surveys and foundations
25 allée du parc de Garlande, 92227 Bagneux cedex
+33 (0)1 49 61 48 00
+33 (0)1 49 61 48 01
www.botte-sondages.fr [email protected]
ORGANIZATION
Botte Sondages is an independent soil engineering office.
ACTIVITIES
Bottes sondages provides consulting services to project owners, project supervisors, and companies for soil and
foundation adaptation issues. A few years ago, Botte Sondages expanded into diagnostics for soil and underground
water pollution and structure surveys.
MANUFACTURERS
LOCATIONS
TRAINING CENTRES
BUSINESSES SELECTED
BOTTE SONDAGES
169
SUPPLIERS
Île-de-France and Brittany.
B
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Remote vibration monitoring of wind turbines
46 rue Champoreux, 91540 Mennecy
+33 (0)1 69 90 63 86
+33 (0)1 64 57 02 45
www.bkvibro.com [email protected]
ORGANIZATION
Brüel & Kjaer Vibro is part of the Spectris group. The company has two plants (in Germany and Denmark) where
the brand’s products are developed and manufactured. It also has several diagnostics centres for remote vibration
monitoring of wind turbines. The company operates in 62 countries through various subsidiaries and agents. It has
been providing vibration monitoring solutions for all types of rotating machinery for over half a century.
ACTIVITIES
Brüel & Kjaer Vibro is an independent leader in all types of machine manufacture for predictive maintenance systems. It
offers specific solutions for remote monitoring of wind turbines, allowing very early detection of failures and mechanical
wear, accurately evaluate changes, and perform precise diagnostics (performed by Brüel & Kjaer Vibro engineers,
who are wind power specialists and ISO 18436-2 and -3 certified). This remote monitoring helps prevent machine
breakdowns and optimises production and maintenance.
LOCATIONS
Île-de-France.
SUPPLIERS
MANUFACTURERS
BRÜEL & KJAER VIBRO
B
170
PARTNERS
Bureau Veritas, your partner for safe, long-lasting, high-quality, environmentallyfriendly installations
67/71 boulevard du Château, 92571 Neuilly-sur-Seine cedex
+33 (0)1 55 24 70 00
www.bureauveritas.fr [email protected]
ORGANIZATION
Bureau Veritas is a world leader in testing, inspections, and certifications (TIC). We help clients improve performance
by offering innovative services and solutions that go beyond simple compliance with standards in order to reduce
risks, improve performance, and promote sustainable development. Bureau Veritas is recognised and accredited by
the largest national and international bodies.
TRAINING CENTRES
BUSINESSES SELECTED
BUREAU VERITAS
All of France.
171
LOCATIONS
SUPPLIERS
Bureau Veritas offers solutions for all types of needs. Its skill sets cover the entire life cycle of your project, including
feasibility, authorisation, design, construction, installation, operation, transfers, and dismantling.
• Offshore and onshore wind turbines: Assistance handling HSE risks and regulatory compliance. Safety reports,
environmental impact studies, collision risk studies, review of ocean meteorology studies and the hydrodynamic
behaviour of foundations. Review of wind turbine design. Technical evaluation of suppliers and first- and second-party
inspections. Technical inspections of constructions, coordination of health and safety, periodic regulatory inspections.
Maintenance optimisation advice. Certification services through Bureau Veritas Certification for certification of wind
turbine types (or parts) and projects.
• Photovoltaic and biomass: Feasibility studies. Risk analysis: supplies, production, distribution. Administrative and
contract assistance. Verification of load capacity of existing structures. Examination of sealing and existing roofing
insulation. Provisional inspections of installations. Evaluation of overall annual output.
MANUFACTURERS
ACTIVITIES
B
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Manufacturer of parts and systems for fluid measurement and control
BP 21, 67220 Triembach-au-Val
+33 (0)3 88 58 91 11
+33 (0)3 88 57 20 08
www.burkert.fr [email protected]
ORGANIZATION
Bürkert’s trading subsidiary in France currently has 50 employees, including 18 sales engineers and 12 office-based
sales staff. Its head office is located in Alsace, near Strasbourg. The company operates throughout France through its
distribution network.
ACTIVITIES
Bürkert is the market leader in fluid process management. Bürkert develops products and systems used to measure,
monitor, and regulate liquid and gaseous fluids. Over the years, the company’s skills centres have developed unique
lines of products such as solenoid valves, process and analysis valves, pneumatic pilot valves, and sensors. Thanks to
its expertise, Bürkert offers complete solutions and products based on its client’s needs for applications that include
plastics, thermal, and mechanical processes.
LOCATIONS
Throughout France.
SUPPLIERS
MANUFACTURERS
BURKERT CONTROMATIC FRANCE
B
172
PARTNERS
SUBSIDIARY OF CAHORS GROUP-
Construction of MV distribution and transformer substations and concrete building
envelopes
TRAINING CENTRES
33 avenue du Général Leclerc, 65203 Bagnères-de-Bigorre
+33 (0)5 62 91 44 66
+33 (0)5 62 91 44 54
www.groupe-cahors.com [email protected]
BUSINESSES SELECTED
CAHORS DIVISION MOYENNE
TENSION
ORGANIZATION
Group involved in photovoltaic power, wind power, and bioenergy.
Initially an electrical engineering company, today the Cahors group is a coherent commercial and industrial entity
organised around six main trades:
• MV / LV transformers • Distribution, connection, and metering (of electricity, gas, and water) • MV / LV connector
technology • Equipment for telecommunications networks • Cutting-edge electronics and satellite reception • Services.
Cahors uses its synergy of expertise to research, design, and implement global scalable solutions to optimise energy
and fluid distribution. Transfix and Pommier offer a complete line of products to connect wind turbines to public highvoltage electrical grids.
MANUFACTURERS
ACTIVITIES
173
SUPPLIERS
Basse-Normandie / Brittany / Pays de la Loire / Poitou-Charentes : Patrice GESTIN - [email protected]
Mobile : 06 85 53 83 08
Île-de-France : Cyril LAUDET - [email protected] - Mobile : 06 07 66 29 32
Haute-Normandie / Nord-Pas de Calais / Picardie : Arnaud LOT - [email protected] - Mobile : 06 42 11 68 44
Alsace / Lorraine / Champagne-Ardenne Luc GUNIA - [email protected] - Mobile : 06 79 04 02 04
Centre : Dimitri BALY - [email protected] - Mobile : 06 30 55 69 04
Rhône-Alpes / Burgundy / Auvergne / Franche-Comté : Hassan BENNOUNA - [email protected]
Mobile : 06 85 22 26 88
Aquitaine / Charentes : Christophe MARTINS - [email protected] - Mobile : 06 72 27 61 66
Limousin / Midi-Pyrénées / Roussillon : Laurent LEVILLAYER - [email protected] - Mobile :
06 86 20 28 14
PACA / Languedoc : Christophe LACOMBE - [email protected] - Mobile : 06 73 68 41 04
DOM TOM : Bruno MICHEL - [email protected] - Mobile : 06 07 85 37 83
LOCATIONS
C
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SUPPLIERS
C
CAP INGELEC
Electrical connection engineering for wind turbines
47 allée des Palanques - BP12, 33127 Saint-Jean-D’Illac
+33 (0)5 56 68 83 20
+33 (0)5 56 68 83 39
www.capingelec.com [email protected]
ORGANIZATION
Founded in 1992, Cap Ingelec is an engineering firm specialising in electrical engineering. It has 250 engineers and
technicians and achieved €33 billion in turnover in 2010.
ACTIVITIES
Cap Ingelec can handle the following operations on wind power electrical grid projects:
• Pre-project design
• Project design
• Assistance in selecting companies to carry out the work
• Management of construction work.
Cap Ingelec also conducts the following types of studies and expert assessment:
• Designing electrical grids (and HV/MV substations) for the connection of wind turbines to power grids, and optimising
cable sections (to minimise electricity loss)
• Verifying the compatibility of wind turbine electrical infrastructure with electrical grids (harmonics and flicker)
• Ensuring that the quality of electricity produced by wind turbines complies with legislation
• Designing voltage maps
• Making electrical comparisons to verify voltage levels at each level of production (100%, 75%, 50%, etc.)
• Conducting high-voltage protection selectivity studies
• Conducting stability studies.
Cap Ingelec draws on the knowledge of 50 experts in HV and MV electrical grids and uses the following software:
• EMTP-RV (www.etmp.com): used to create electricity simulations to optimise electrical stability
• ETAP (www.etap.com): used to create electricity simulations to improve electrical grid design.
LOCATIONS
Île-de-France, Champagne, Centre, Pays de la Loire, Aquitaine, Midi-Pyrénées, Rhône-Alpes, and Provence-Alpes-Côte d’Azur.
174
PARTNERS
BUSINESSES SELECTED
CAPELLE
Special transport
Mas David, 30360 Vezenobres
+33 (0)4 66 25 55 00
+33 (0)4 66 25 55 09
www.transports-capelle.fr [email protected]
TRAINING CENTRES
ACTIVITIES
Capelle specialises in transport, logistics, assembly, and access road construction.
LOCATIONS
175
SUPPLIERS
MANUFACTURERS
C
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
CATEXE-CATEOLE
Special transport
31 rue des frères Lumière, 68000 Colmar
+33 (0)3 89 41 87 10
+33 (0)3 89 24 25 87
www.catexe.com [email protected]
ORGANIZATION
A team of eight to ten people working throughout France and Europe for over 25 years.
ACTIVITIES
Catexe Cateole is a player specialised in organising special transport, logistics, freighting, surveys, authorisations,
and access studies.
Alsace, Lorraine.
SUPPLIERS
MANUFACTURERS
LOCATIONS
C
176
PARTNERS
BUSINESSES SELECTED
CATHIE ASSOCIATES
Offshore geotechnics and marine geoscience
1 rue de Craïova, 92000 Nanterre
+33 (0)1 47 32 48 30
www.cathie-associates.com [email protected]
TRAINING CENTRES
ACTIVITIES
• Management of surveys (specifications, scope of work, supervision).
• Desktop studies, site evaluation, cable route selection. Foundation design (feasibility, FEED, basic, detailed).
• Installation engineering : pile driving or drilling analyses, cable trenching assessments.
• Pile dynamic load testing, Certification dossier.
LOCATIONS
177
SUPPLIERS
MANUFACTURERS
Île-de-France.
C
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
CEGELEC RENEWABLE ENERGIES
Electrical engineering, electricity transmission and distribution, foundations
1 rond-point du Général Eisenhower - CS 40605, 31106 Toulouse cedex 1
+33 (0)5 62 87 01 28
+33 (0)5 62 87 01 30
www.cegelec-renewable-energies.fr [email protected]
ORGANIZATION
Cegelec Renewable Energies is a company in the VINCI Energies Group. The Group’s 64,000 professionals are at
the service of businesses and public authorities to deploy, equip, operate and optimise their energy, transport and
communications infrastructure, industrial facilities and buildings. The leader in France and a major player in Europe,
VINCI Energies is present worldwide.
ACTIVITIES
As a general contractor, member of a consortium, or through separate contracts, Cegelec Renewable Energies makes
the engineering, procurement and construction of windfarms infrastructure (electrical works LV, MV, HV, access roads
and crane pads, foundations, networks and if applicable windturbine erection).
Cegelec Renewable Energies works in close relationship with project developers during the permitting process,
making them benefit of more than 15 years of experience (ERDF and RTE connections, contact with local authorities,
infrastructure cost optimization through micrositting, support for administrative process…). For international projects,
Cegelec Renewable Energies teams up with the Group’s companies and local partners to bid for important windfarms
in countries such as Morocco, Algeria, Bulgaria, Brazil, Turkey, Romania etc.
SUPPLIERS
LOCATIONS
C
Cegelec Renewable Energies is based in Toulouse, France, and has site managers based on windfarms under
construction. This enables us to work everywhere in France and internationally thanks to the strong network provided
by the VINCI Group.
178
PARTNERS
Immeuble Arago 1 - 41 boulevard Vauban, 78280 Guyancourt
+33 (0)1 34 52 10 80
+33 (0)1 34 52 27 30
www.cgglobal.fr [email protected]
ORGANIZATION
CG France (formerly PAUWELS France) has 50 employees across its 2 entities:
• CG Sales Network France, based in Paris (Yvelines) and Lyons (Rhône), sells the range of CG products.
• CG Services Systems France, based in Fécamp (Seine-Maritime) and Avignon (Vaucluse), provides services and
maintenance for transformers.
BUSINESSES SELECTED
Supplier of equipment, solutions, and services - Conversion and distribution of highvoltage electricity
TRAINING CENTRES
CG SALES NETWORKS FRANCE
LOCATIONS
Île-de-France.
179
SUPPLIERS
Supplier of equipment, solutions, and services for the transformation and distribution of electrical energy.
CG Sales France offers:
• Turnkey project solutions for transformer substations, with particular expertise in connecting onshore and offshore
wind farms to the high-voltage grid
• Distribution transformers, including SLIM transformers specifically for wind turbines
• Power transformers
• A complete line of HV and MV equipment, both conventional and shielded GISs (circuit breakers, isolators, current
and voltage transformers, etc.)
CG Services Systems specialises in the construction of transformer substation installations, transformer maintenance
and services, and substation equipment.
MANUFACTURERS
ACTIVITIES
C
PARTNERS
BUSINESSES SELECTED
CHOMARAT
Technical textiles
39 avenue des Chabannes, 07160 Le Cheylard
+33 (0)4 75 29 81 00
+33 (0)4 75 29 20 12
www.chomarat.com [email protected]
TRAINING CENTRES
ORGANIZATION
Chomarat is an international textile group which employs 1,500 people. The group operates on diverse markets and
technologies, and is organised in three areas of activity: composites, textiles, and fashion.
ACTIVITIES
Chomarat develops uni- and multi-directional reinforcement using fibreglass and carbon. The reinforcements are used
in the manufacture of blades and nacelles.
The Chomarat group has been located in Rhône-Alpes for more than 100 years. It also operates in the United States,
Tunisia, and China.
Thanks to its global presence, it assists clients in their development abroad–a major advantage for markets such as
wind power which are going global.
SUPPLIERS
MANUFACTURERS
LOCATIONS
C
180
PARTNERS
Mechanised welding, supports, power plant pipework
57 rue de Franche-Comté, 21760 Lamarche-sur-Saône
+33 (0)3 80 77 11 00
+33 (0)3 80 77 11 03
www.cita-production.fr [email protected]
ACTIVITIES
Cita Production is a mechanised welding company specialising in structure support. It works directly with major nuclear
pipework players whose clients include Areva and EDF.
LOCATIONS
181
SUPPLIERS
MANUFACTURERS
Burgundy.
TRAINING CENTRES
BUSINESSES SELECTED
CITA PRODUCTION
C
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
CLM INDUSTRIE
Small production runs of mechanically-welded parts and assemblies (machining,
boilermaking, assembly)
3 impasse du champ chardon - Parc excellence 2000, 21800 Chevigny-Saint-Sauveur
+33 (0)3 80 74 40 10
+33 (0)3 80 74 47 22
www.clm-indutrie.com [email protected]
ORGANIZATION
• Small industrial OEM (having an industrial organisation with the responsiveness of a small business).
• Experience working with the major energy players (such as EDF and Areva).
• ISO 9001 certification v2008.
• Welding qualifications.
• Completely independent document management (manufacturer files).
• Precise engineering.
• Expertise from an integrated mechanical engineering office.
• Assembly and test area.
ACTIVITIES
Target segment: Mechanical and mechanically-welded parts and assemblies weighing less than one tonne for small
or offshore wind turbines - Prototypes, individual and small-scale production (<250 items).
LOCATIONS
SUPPLIERS
Burgundy.
C
182
PARTNERS
SUBSIDIARY OF CIF DE BUSSY GROUP-
Manufacture of gears, reducers, and gearboxes
36 avenue de l’Europe, Immeuble l’Etendard – BP 43, 78142 Vélizy-Villacoublay
+33 (0)1 34 63 12 24
+33 (0)1 34 63 12 12
www.cmdgears.com [email protected]
ORGANIZATION
For more than a century, CMD has been designing and producing gears, reducers, and gearboxes for low-speed, hightorque installations, including wind generators, which currently require gears several metres in diameter.
The company was founded in 1901. In 2008 it achieved a turnover of €90 billion, 70% of which came from export. It
has 430 employees, including 60 engineers and executives.
TRAINING CENTRES
BUSINESSES SELECTED
CMD GEARS
• Mori Seiki horizontal machining centres: Ø 1,100, length = 6,000, max. mass = 7 tonnes
• BERTHIEZ TV13 vertical lathe: Ø 13,000, height = 2,700, max. mass = 70 tonnes
• Internal and external gear cutting: PFAUTER P4500: Ø 4,500, module = 32, max. mass = 70 tonnes
• 2 SCHIESS RF30 internal/external: Ø 12,700, module = 50, max. mass = 100 tonnes
• Internal and external gear grinding: PFAUTER P4500 G, Ø 4,350, module = 46, max. mass = 40 tonnes, precision = ISO3
• KLINGELNBERG PNC260 monitoring machine: Ø 2600, module = 50, max. mass = 20 tonnes
MANUFACTURERS
ACTIVITIES
LOCATIONS
183
SUPPLIERS
Head office and plant in Cambrai (Nord), 539 avenue du Cateau, 59400 - Cambrai.
Plants in Fourchambault and Guérigny (Nièvre).
Subsidiaries in Germany, the United States, and Canada.
Sales offices in Lille, Lyon, Rennes, and Vélizy.
C
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SUPPLIERS
C
CMI TECH 51 PASTOR
SUBSIDIARY OF CMI GROUP-
Wind turbine maintenance and assessment
Lot n°34 la Feuillane, 13770 Fos-sur-Mer
+33 (0)4 42 40 05 00
www.cmigroupe.com [email protected]
ORGANIZATION
French Société par actions Simplifiées (Simplified limited company).
ACTIVITIES
CMI Tech 5I Pastor is active in the onshore and offshore wind energy sector, offering a wide range of services:
• Machine commissioning with help from the manufacturers
• Preventive maintenance
• Corrective maintenance
• Predictive maintenance
• Troubleshooting, repair
• Vibration analysis and monitoring
• Oil sample analysis
• Reliability and availability analysis
• End-of-warranty evaluations
• Specific tasks (gearbox or generator replacement, etc.)
LOCATIONS
Provence-Alpes-Côte d’Azur region.
184
PARTNERS
6(59,&(6
commissioning
scheduled and unscheduled maintenance
fault finding fault diagnosis and trouble shooting
predictive maintenance (MINT)
reliability and availability analysis
assessment after warranty period
heavy equipment on site works such as gearboxes
or generator replacement
Education and training of CMI skilled
technicians:
CMI Services has selected and trained high level
technicians
a successful education of Bachelor or master
in electro-mechanics is the minimum required
before employment
CMI Teams Strength:
familiar with HSE plan and risks assessments, dully
trained for:
BOSIET, HUET (Opito)
helicopter winching
first aid
working and rescue at height
TRAINING CENTRES
CMI teams are:
CMI references
Wind turbine farm operators:
Belwind
C-Power
La Compagnie du Vent
EDF EN
Wind turbine manufacturers:
REpower
Vestas
Nordex
Alstom Ecotechnia
Gamesa
MANUFACTURERS
Safety first
continuous awareness of HSE rules, health safety
environment and working conditions dedicated to
our Client’s needs
fully equipped workshops with large capacity for
supporting operational teams
policy of continuous training
ISO 9001 certification
Contact
CMI Services
Windturbine Technology Pole
CMI Tech5i/Pastor
Lot 34 La Feuillane 13770 Fos sur Mer cedex
Tel: +33 4 42 40 05 00
Email: [email protected]
www.cmigroupe.com/services
185
Since 2008 CMI Services is active in wind turbines
maintenance offshore and on shore as well
supplying its customers with a wide range of high
level services:
JIF?
AS
.?=BHIFI
SUPPLIERS
CMI Services is involved in Wind
turbines maintenance
#(
1#(./,
BUSINESSES SELECTED
Your partner in wind turbines
X
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SUPPLIERS
C
CMR FRANCE (Contrôle Mesure
Regulation)
SUBSIDIARY OF CMR GROUP-
Instrumentation, engineering, industrial data processing, automation
Technopole de Château Gombert - 7 rue John Maynard Keynes, 13013 Marseille
+33 (0)4 91 11 37 00
+33 (0)4 91 11 37 02
www.cmr-group.com [email protected]
ORGANIZATION
Founded in 1959 in Marseille (France), CMR is an international group of 8 subsidiaries located around the world.
Today, 500 people including 40 engineers develop and market in perfectly equipped premises a full range of products
from sensors to complete supervision systems. CMR is ranked amongst the French 100 most successful SMEs/ETIs
(according to the French “Express” magazine, ...).
8% of the turnover of CMR is dedicated to the research of new technologies whose reliability is strictly controlled by
Classification Societies. Our Group is ISO 9001:2008 certified by the AFAQ Certification. CMR FAR EAST, a subsidiary
of CMR Group in Singapore is specialized in the manufacture of low an medium-voltage switchboards.
ACTIVITIES
Design, development and marketing of a full sensor range for rotating machines, harnesses and monitoring and
control/command systems meeting the requirements of the industry sector dedicated to the production of energy.
Engineering is also a strong business of CMR which is able to offer solutions for monitoring, automation and supervision
for end-users even in offshore or far distant areas.
LOCATIONS
In France: Provence-Alpes-Côte d’Azur region.
Abroad: USA, UK, Tunisia, Germany, India, China, Singapore.
186
PARTNERS
18 allée de Montréal - BP439 Ville-La-Grand, 74108 Annemasse
+33 (0)4 50 87 72 50
+33 (0)4 50 37 67 51
www.cobham.com/sliprings [email protected]
ACTIVITIES
Cobham Sliprings has been designing and manufacturing electrical slip rings since 1962.
Electrical slip rings create an electrical connection between a stationary part and a rotating part in multi-turn rotations
when cable transmission is not possible.
Standard or custom, with or without bore.
Transmission of low-level or high-frequency signals up to 500 MHz.
Transmission of video, RS 422, RS 485, and Profibus signals, field networks, and ethernet.
Power transmission up to several hundred amperes.
Since 1997, over 35,000 wind turbines have been equipped with Cobham electrical slip rings.
Wind turbine applications:
• Electrical or hydraulic pitch control
• Generator excitation
• Transmission of power, signals, bus networks, etc.
• Blade heating power supply
LOCATIONS
MANUFACTURERS
Design and manufacture of electrical slip rings
TRAINING CENTRES
BUSINESSES SELECTED
COBHAM SLIPRINGS
187
SUPPLIERS
Rhône-Alpes.
C
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SUPPLIERS
C
COFELY ENDEL
SUBSIDIARY OF GDF SUEZ-
Industrial Maintenance and associated services
Tour Voltaire - 1 place des Degrés, 92059 Paris La Défense cedex
+33 (0)1 57 60 90 00 www.cofelyendel-gdfsuez.com
[email protected]
ORGANIZATION
ENDEL SAS is a GDF SUEZ subsidiary.
ACTIVITIES
French leader for industrial maintenance and associated services, and privileged partner of industrial companies,
Cofely Endel pilots or accompanies complex projects in a number of different sectors. With a staff of 5,500, and more
than 140 sites, the subsidiary of the Energy Services Business Line of GDF SUEZ today achieves a turnover of almost
700 million Euros.
Its primary objective is to allow its clients to remain centered on their core businesses and improve the dependability
and performance of their installations with an ongoing concern for safety and security. The professionalism of the
Cofely Endel teams is expressed through its many specific abilities such as boiler making, electromechanical, piping,
maintenance and realization engineering, project management, research and logistical skills, …
To improve the industrial performance of its clients, Cofely Endel is committed to a process of energy and environmental
efficiency. Its eco-solution experts are therefore available for the entire range of businesses – to analyze and meet
its clients’ energy efficiency needs.
Key sectors:
• Aeronautics/space industry • Agro-food • Army • Wind turbines • Rail • Gas • Hydraulics • Engineering • Naval •
Nuclear • Petrochemical • Pharmacy / cosmetics • Port authorities • Steel • Thermal.
LOCATIONS
140 sites in France and overseas departments and territories (French Guiana & Reunion).
188
PARTNERS
BUSINESSES SELECTED
COFELY INEO
Execution of wind farm infrastructures
Tour Voltaire - 1 place des degrés, 92059 Paris La Défense
www.cofelyineo-gdfsuez.com [email protected]
Cofely Ineo works on projects for industrial and tertiary-sector electrical installations, energy networks, public lighting,
transportation and telecommunications infrastructures, overall security, energy production, information systems, and
outsourcing. Cofely Ineo is part of GDF SUEZ Energy Services, european leader of multi-technical services and one of
five business lines of GDF SUEZ, a leading worldwide energy company.
ACTIVITIES
MANUFACTURERS
Cofely Ineo, GDF SUEZ, is a leading supplier of renewable energy solutions. As a wind turbine infrastructure manufacturer,
Cofely Ineo provides integrated solutions from feasibility studies to grid connection. As an installer and a system
integrator, Cofely Ineo designs and develops turnkey photovoltaic solutions suitable for various setup: roof-mounted
solar panels or photovoltaic plants.
TRAINING CENTRES
ORGANIZATION
LOCATIONS
189
SUPPLIERS
300 facilities in France and 15,500 employees.
C
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
COLAS
Construction and maintenance of transport infrastructure
7 place René Clair, 92653 Boulogne-Billancourt
+33 (0)1 47 61 76 93
+33 (0)1 47 61 74 72
www.colas.fr [email protected]
ORGANIZATION
The Colas group is a leader in the construction and maintenance of transport infrastructures. Colas operates in 50
countries through a network of 800 establishments and 1,400 equipment production sites. It has 66,000 employees
and executes 110,000 construction sites each year, using resources from a dense network of quarries, emulsion
plants, and coating sites. In 2012, Colas had a consolidated turnover of €13 billion, 42% of which came from abroad.
In France, Colas operates through its 450 locations grouped in seven regional subsidiaries, as well as its subsidiary
SPAC, specialised in network activities.
SUPPLIERS
MANUFACTURERS
ACTIVITIES
C
Colas has been working on construction sites for energy production (wind, solar, biomass, etc.) for several years, providing:
• Know-how from its construction units in earthwork, roadways, foundations, and networks
• A single contact nationwide following cases and local monitoring of the execution of your projects
• The ability to conduct studies anywhere in France
• A global work offer or in separate work packages
• Technical solutions suitable for all types of land
• Construction optimisation that meets quality standards and deadlines.
Thanks to its numerous locations, Colas employs locals at all its construction sites.
LOCATIONS
Île-de-France.
190
PARTNERS
ORGANIZATION
Comer Industries is a world leader in the design and production of power transmission engineering systems.
The company is a player various sectors:
• Agriculture
• Industrial
• Mobile
• Energy
It has 1,300 employees and turnover of more than €330 billion.
Comer Industries is a reliable partner with a reputation for its continuous improvement, flexibility, rapid response to
client needs, and collaboration in co-engineering projects. It has strategically-placed premises, the ability to innovate,
and highly-qualified international staff.
ACTIVITIES
Comer Industries is a strategic partner to major manufacturers of renewable energy machines in over 60 countries
around the world.
Its power transmission solutions have been used by some of the world’s topmost players in wind power.
Comer Industries has developed a wide range of drivetrains that set pitch, yaw, and drive in motion in wind turbines
up to 10 MW.
LOCATIONS
Île-de-France.
191
MANUFACTURERS
1 avenue Christian Doppler, 77700 Serris
+33 (0)1 60 31 70 50
+33 (0)1 60 31 03 71
www.comerindustries.com [email protected]
Design and execution of engineering systems for power transmission
SUPPLIERS
SUBSIDIARY OF COMER INDUSTRIES SPA-
TRAINING CENTRES
BUSINESSES SELECTED
COMER INDUSTRIES
C
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
CORDIAL
SUBSIDIARY OF PROMAN-
Hiring and deployment of wind turbine assembly and maintenance specialists
(fixed-term and permanent contracts and temporary positions)
ZI Sud-Est , Immeuble « Le Lotus » - 22 rue du Bignon, 35000 Rennes
+33 (0)2 23 41 20 50
+33 (0)2 23 41 20 51
www.cordial-interim.fr [email protected]
ACTIVITIES
HR management solutions: Hiring, deployment, and management of technicians. Fixed-term and permanent contracts
and temporary jobs.
LOCATIONS
SUPPLIERS
MANUFACTURERS
National and international deployment.
C
192
PARTNERS
Manufacture of gears
Zi de Tavannes - BP 50099, 55103 Verdun cedex
+33 (0)3 29 84 33 89
+33 (0)3 29 84 17 99
www.cordm.com [email protected]
ORGANIZATION
For 30 years, CORDM has been manufacturing straight-cut, helical, and conical gears up to 1,600 mm in diameter
and a maximum module of 25. Its gears meet ISO 1328-4 standards.The company works with client drawings and can
provide comprehensive manufacturing services or à la carte machining, cutting, or tooth correction only, as needed.
All services are accompanied by complete quality documentation.
Our head office and production facilities are located at the same site in Verdun in France. Thanks to its significant
investment policy, CORDM has a newly-renovated 6,000 m2 plant equipped with around 50 cutting-edge machines.
TRAINING CENTRES
BUSINESSES SELECTED
CORDM
Quality measurement has been our top priority for many years. Our efforts are focused both on our quality management
system (CORDM is ISO 9001-certified) and inspection of our products. CORDM has a three-dimensional WENZEL
WGT1000 measurement centre and a facility for magnetic particle inspection and chemical attack (Nital etching)
for non-destructive testing.
Thanks to the quality of its products, CORDM has doubled its turnover in the past three years. It supplies gears to the
some of the largest prime contractors in the world in diverse markets, including railways, wind power, crushing, heavy
industry, oil and gas, tunnel boring, and mining machinery, etc.
MANUFACTURERS
ACTIVITIES
Lorraine (Verdun).
193
SUPPLIERS
LOCATIONS
C
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
CTE WIND CIVIL ENGINEERING
Wind turbine foundation engineering
33 rue du Haut Chemin, 35780 La Richardais
+33 (0)3 89 66 60 58
+33 (0)2 23 15 09 10
www.cte-wind.com [email protected]
ORGANIZATION
A LLC created in 2012 and located in Dinard (Brittany). CTE WIND is part of the CTE group, based in Mulhouse (Alsace),
which has been active in the wind energy sector since 2003.The corporate group owns subsidiaries in Poland (Warsaw),
Germany (Freiburg im Breisgau), Portugal (Lisbon), Vietnam (Hanoï) and Brazil (Porto Alegre).
CEO : Thierry Hummel.
Director : Alexander Martin.
MANUFACTURERS
ACTIVITIES
An experienced design office specializing in the analysis and design of onshore wind turbine foundations. CTE WIND
also offers consulting and expertise services for the design of foundations.
Share of the wind sector in our activity: 100%
Staff: 15 employees
Achievements: foundation design for more than 4,800 wind turbines (8,600 MW) in more than 670 farms, in France
and in over twenty countries throughout the world (Germany, Belgium, Poland, Romania, Turkey, Canada, Mexico,
Uruguay, Brazil, Vietnam etc.).
Future work: reinforced concrete towers, strengthening of our activity in Eastern Europe and Africa.
SUPPLIERS
LOCATIONS
C
Britanny and Alsace.
194
PARTNERS
663 avenue de la première armée française
ZIP Brégaillon, 83500 La Seyne-sur-Mer
+33 (0)4 94 11 54 20
+33 (0)4 94 06 62 67
www.d2m-group.com [email protected]
ORGANIZATION
Independent private company founded in 1986.
Team: naval architects, structural engineers, systems engineers, hydrodynamic engineers, anchor engineers, engineers
specialising in ocean and meteorology studies and designers.
ACTIVITIES
LOCATIONS
La Seyne-sur-Mer (Var) and Le Pecq (Yvelines).
195
SUPPLIERS
Naval architecture and marine engineering studies focusing on:
• Foundations, anchors, and structures for marine renewable energy systems (wave, current, wind)
• Studies of a site’s environmental conditions: analysis and processing of ocean meteorology data, statistics, and
extreme conditions
• Engineering for offshore construction, installation procedures, maritime capabilities
• Studies of floating and bottom-fixed platforms for the offshore oil industry
• Anchoring of offshore oil structures
• Marine operations (marine procedures for installation and transport, maritime and mechanical tools, lifting at sea,
towing)
• Ship design, especially lay barges, crane sizing, and dynamic positioning
• Risk studies.
MANUFACTURERS
Engineering office for naval architecture and marine engineering
TRAINING CENTRES
BUSINESSES SELECTED
D2M ENGINEERING
D
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
DAHER INTERNATIONAL
SUBSIDIARY OF COMPAGNIE DAHER-
Engineering - Manufacture - Integration - Industrial logistics
1 allée Maryse Bastié, 91325 Wissous
+33 (0)1 49 75 98 47
+33 (0)1 49 75 98 33
www.daher.com [email protected]
ACTIVITIES
• Aeronautics: design - manufacture - systems integration (metal and composite expertise).
• Nuclear: nuclear environment authorisations and certifications.
• Consideration of safety and security and environmental impact.
LOCATIONS
SUPPLIERS
MANUFACTURERS
Île-de-France.
D
196
PARTNERS
Naval defence applications and energy innovation
40-42 rue du Docteur Finlay cedex 15, 75732 Paris
+33 (0)1 40 59 50 00
+33 (0)1 40 59 58 75
www.dcnsgroup.com [email protected]
ACTIVITIES
MANUFACTURERS
DCNS is a world leader in the naval defence sector and an innovator in energy. An international, high-tech company,
DCNS serves its clients using its exceptional expertise and unique industry capabilities. The group designs, builds, and
maintains submarines and surface ships and related systems and infrastructure. It also provides services to construction
sites and naval bases. DCNS also offers a wide range of energy solutions, particularly for marine renewable energy.
DCNS is committed to sustainable development and was one of the first players in its sector to achieve ISO 14001
certification. DCNS was awarded France’s Trophée national de l’entreprise citoyenne (national corporate citizenship
trophy under the patronage of the President of the Senate.) The prize was awarded to the company for its knowledge
transfer programme ‘Les Filières du Talent DCNS’. The company has 12,000 employees and a turnover of €2.4 billion.
TRAINING CENTRES
BUSINESSES SELECTED
DCNS
LOCATIONS
197
SUPPLIERS
Île-de-France.
D
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
DEC+
Thermal cutting and the machining of metal components
8 rue du Creusot - BP 34, 71210 Montchanin
+33 (0)3 85 80 27 49
[email protected]
ORGANIZATION
6,500 m2 storage facility with 14 overhead cranes near a railway freight station.
ACTIVITIES
Dec+ provides computerised thermal cutting, machining and chamfering on one single machine and shot-blasting
for Wind-industry companies.
Burgundy.
SUPPLIERS
MANUFACTURERS
LOCATIONS
D
198
PARTNERS
9 rue du Saule Trapu, 91882 Massy cedex
+33 (0)1 60 13 81 81
+33 (0)1 60 13 81 00
www.def-online.com [email protected]
ORGANIZATION
Established in France in 1958, DEF provides services to the fire trade for over 50 years. DEF designs, supplies, installs,
commissions and services a wide range of fire detection and fire extinguishing systems.
DEF’s mission is to provide you with the best fire protection solutions to “protect your future”.
ACTIVITIES
Fire fast “out of control” and can evolve into a catastrophy. It is the only event that has a high impact on loss of life,
environmental exposure, and costs. Fire endangers the continuity of an operation and a early detection and extinguishing
is the only way to prevent a fire developing into a catastrophe.
As for the wind energy activity, European reference tables recommend to integrate fire safety systems in the hazardous
areas such as nacelles, transformers, switchgear cabinets, and electric power stations.
LOCATIONS
199
SUPPLIERS
The DEF Group counts 30 companies, 1,700 employees, local branches in 8 countries and 30 local agencies in France
– among with agencies dedicated to specific activities (Nuclear, Telecom, Transport and Wind Energy), 6 factories, 4 in
France, 1 in Italy and 1 in China for a turnover of € 175 million in 2012.
MANUFACTURERS
Solutions and services for fire safety systems
TRAINING CENTRES
BUSINESSES SELECTED
DEF
D
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Technical and human risk prevention
34-36 rue Alphonse Pluchet - CS 60002, 92227 Bagneux cedex
+33 (0)1 55 48 22 63
+33 (0)1 55 48 23 60
www.dekra-industrial.fr [email protected]
ORGANIZATION
DEKRA Industrial SA is a holding grouping the various subsidiaries in the group and is a branch of the DEKRA International
group dedicated to risk prevention at all project stages (design, construction, operation, and transfer).
ACTIVITIES
Equipment inspection, construction inspection, HSE recommendations, consulting in property matters and technical
audits, property and real estate diagnostics, and management systems certification training.
LOCATIONS
Île-de-France.
SUPPLIERS
MANUFACTURERS
DEKRA INDUSTRIAL
D
200
PARTNERS
9 rue de Bourgogne, 89250 Chemilly-sur-Yonne
+33 (0)3 86 40 92 10
+33 (0)3 86 40 92 15
www.delta-box.fr [email protected]
ORGANIZATION
Delta Box is a French company specialising in the design and manufacture of aircraft warning lights. With 20 years
of experience in obstacle warning lights, Delta Box’s products meet ICAO (International Civil Aviation Organisation)
guidelines.The company’s research and development department is constantly producing innovations to offer products
that use the latest technology, such as LEDs and solar power.
Delta Box offers four different ranges of low-, medium-, and high-intensity obstacle warning lights:
• LEDEO: LED technology
• SERA: Neon technology
• STROBEO: Strobe technology
• SOLEO: Solar technology
Delta Box’s products are particularly suitable for warning lights on telecommunications towers, airport towers, buildings,
cranes, wind turbines, and large civil engineering structures.
ACTIVITIES
LOCATIONS
Burgundy.
201
SUPPLIERS
Delta Box has developed a complete line of solutions for met masts (solar) and wind turbines (synchronised and with
backup) that meet current regulations. All Delta Box products are certified by STAC (Service Technique de l’Aviation Civile).
Delta Box’s products feature LED technology, solar-powered systems, and UPS cabinets.
It offers various types of synchronisation depending on clients’ needs.
MANUFACTURERS
Manufacturer of aircraft warning lights
TRAINING CENTRES
BUSINESSES SELECTED
DELTABOX-SERA
D
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
DEUBLIN SARL
Precision rotating joints
61 bis avenue de l’Europe - ZAC de la Manoue, 77184 Emerainville
+33 (0)1 64 61 61 61
+33 (0)1 64 61 63 64
www.deublin.com [email protected]
ORGANIZATION
The Deublin group is a world leader in the manufacture of precision rotating joints. Deublin is present on every continent,
with four modern production facilities and 18 subsidiaries, plus a network of exclusive distributors around the world.
ACTIVITIES
Thanks to its know-how, Deublin has been supplying wind turbine developers, builders, and users with:
• Single- and multi-way hydraulic rotating joints
• LV, MV and HV electrical slip rings
• A comprehensive inventory of rotating joints and spare parts available instantly anywhere in France and abroad
• Specialists to provide technical support, after-sales service, and studies to find a suitable technical solution
• Repair service on-site or at our facilities.
Deublin has become an essential partner to the wind power industry, with tens of thousands of rotating joints sold
to first tier manufacturers.
LOCATIONS
SUPPLIERS
Operating from its base in Emerainville (Seine-et-Marne), Deublin SARL delivers rotating joints and spare parts and
can operate anywhere in France.
D
202
PARTNERS
21 rue François Garcin, 69003 Lyon
+33 (0)4 27 46 22 70
+33 (0)4 27 46 22 79
www.dewi-france.fr
[email protected]
ORGANIZATION
The DEWI group currently employs 160 people and has been part of the Underwriters Laboratories company since
June 2012. UL is an international certification and safety body that has been in existence for over 100 years. DEWI’s
parent company is located in Germany and has subsidiaries in Spain, France, Italy, Turkey, Canada, Brazil, and China.
ACTIVITIES
As a one of the world’s leading wind energy consultants, DEWI offers all types of measurement, analysis, and study
services, onshore and offshore certifications for wind turbines and other components, in-depth training, and technical
and financial consulting services to wind power developers and banks. Visit our websites for more information:
www.dewi.de / www.dewi-occ.de / www.ul.com.
Wind measurement; studies of wind potential and forecasted resources; measurement of power curves; measurement
of mechanical load; acoustic and vibration measurements; integration, quality, grid connection conditions; technical due
diligence; wind turbine inspections; R&D; training and seminars; certification (DEWI-OCC) of turbines and components.
LOCATIONS
MANUFACTURERS
Measurements, analyses, and studies, onshore and offshore certifications
TRAINING CENTRES
BUSINESSES SELECTED
DEWI FRANCE
203
SUPPLIERS
Rhône-Alpes.
D
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Electrotechnical engineering
ZA des Alleux, 7 rue du noroît, 22100 Taden
+33 (0)2 96 87 48 00
+33 (0)2 96 87 48 01
www.dynalec.com [email protected]
ORGANIZATION
A “Société Coopérative et Participative à forme anonyme” (worker cooperative in the form of a limited liability company)
with variable capital. 15 employee associates. €2.5 billion in turnover.
ACTIVITIES
Development, studies, design, manufacture, and installation of electrical cabinets and control and command cabinets
for the process industry. Commissioning. Design and construction of all kinds of systems for supervision, remote
management, automation, and industrial data processing. After-sales service hotline. Sale and resale of machines,
accessories, and supplies. One R&D office.
LOCATIONS
Head office in Dinan in Côtes-d’Armor in Brittany. Long-standing trading region: France.
SUPPLIERS
MANUFACTURERS
DINALEC SCOP SA
D
204
PARTNERS
Ditribution boards
16 rue des Cortots, 21121 Fontaine-lès-Dijon
+33 (0)9 62 21 17 62
www.dmtableaux.com [email protected]
ORGANIZATION
The company employs 7 technicians, four of whom have 20 years of experience in industrial wiring as well as trainees
on various courses.
Proactive in cost estimates and production, with a 620 m2 workshop space, DM Tableaux produces small and middlesized series.
LOCATIONS
TRAINING CENTRES
BUSINESSES SELECTED
DM TABLEAUX
205
SUPPLIERS
MANUFACTURERS
Burgundy.
D
PARTNERS
BUSINESSES SELECTED
DNV GL (ex GL GARRAD HASSAN
France)
Technical consultingg
69, rue du Chevaleret, 75013 Paris
www.dnvgl.com
+33 (0)1 44 50 56 10
+33 (0)1 44 50 56 20
[email protected]
MANUFACTURERS
TRAINING CENTRES
ORGANIZATION
DNV GL is the world leader in technical consulting in the field of renewable energy. An acknowledged expert in services
for the wind power industry, the company also has cutting-edge expertise in solar and marine energy.
ACTIVITIES
DNV GL provides assistance to project owners (developers, investors, equipment manufacturers, etc.) at all stages of
their project, from initiation to operation.
Development/financing:
• Wind measurements (conventional, LiDAR, SoDAR)
• Site identification (feasibility and impact studies)
• Studies of production potential (wind, solar, ocean)
• Banking audits (due diligence: review of supply, construction, and maintenance contracts)
• Project audits for investors (buyers or sellers)
• Complete engineering services for onshore and offshore wind farms (civil and electrical engineering, marine
construction, maintenance and operation plans).
Supply/construction:
• Construction site management and acceptance of structures
• Comprehensive project management for offshore wind farm projects.
Operation:
• Monitoring and optimisation of project performance, operation audits
• Commissioning and end-of-warranty inspections, routine inspections
• Power curve measurements
• Measurement of electrical and acoustic properties
• Short-term projections of renewable energy production.
Manufacturing:
• Machine design (wind turbines, hydro-kinetic) and monitoring systems.
Training, strategy and policy studies, market studies.
Software: WindFarmer (for wind farm design), Bladed (to model wind turbines), SCADA (for supervisory control and
data acquisition during operation).
SUPPLIERS
LOCATIONS
D
Île-de-France.
206
PARTNERS
Designer and manufacturer of hydraulic cylinders, hydraulic systems, piston
accumulators, and Jarret Structures shock absorbers
2 rue de l’Industrie - BP 20213, 80303 Albert cedex
+33 (0)3 22 74 31 00
+33 (0)3 22 74 78 43
www.doucehydro.com [email protected]
ACTIVITIES
A prototype for a retractable wind turbine is currently being tested. Douce-Hydro designs and manufactures counterweight
and lifting cylinders.
LOCATIONS
TRAINING CENTRES
BUSINESSES SELECTED
DOUCE-HYDRO SAS
207
SUPPLIERS
MANUFACTURERS
Picardy.
D
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
DUFF NORTON EUROPE
Manufacture of rotating joints and check valves
45 route nationale, 02310 Romeny-sur-Marne
+33 (0)3 23 70 70 00
+33 (0)3 23 70 70 10
www.duffnorton.fr [email protected]
ORGANIZATION
The company was founded in 1927 under the name Raccord Gautier but became Duff Norton Europe in 1998 when
it was bought by the Colombus McKinnon group. Its production facilities and head office are based in Romeny-surMarne in Aisne. Duff Norton Europe has about 30 employees and makes 50% of its turnover from export, mostly
within Europe. The Duff Norton subsidiary based in Charlotte, North Carolina, in the US has helped strengthen the
company’s world presence.
Duff Norton Europe is a manufacturer of rotating unions, swivel joints, and check valves.The experience of its sales and
technical teams, backed by the engineering office, allow it to conduct studies and offer specific solutions according
to clients’ needs.
LOCATIONS
Picardy, Languedoc-Roussillon.
SUPPLIERS
MANUFACTURERS
ACTIVITIES
D
208
PARTNERS
Transport and handling
21-23 route de Bourbourg, 59380 Spycker
+33 (0)3 28 25 36 22
+33 (0)3 28 60 37 97
www.dufour-transport.fr [email protected]
ORGANIZATION
Dufour Transports et Manutentions SA owns France’s largest fleet of high-capacity construction cranes on the wind
power sector:
• Lattice boom crawler cranes (all types up to 600 tonnes)
• Lattice boom wheel cranes (all types up to 750 tonnes)
• Wheel cranes with telescopic boom (all types up to 700 tonnes)
TRAINING CENTRES
BUSINESSES SELECTED
DUFOUR
Dufour Transports et Manutentions SA specialises in crane operations, transport of indivisible parts, and wind turbine
assembly. It has lifting cranes and cranes that can lift nacelles to great heights, suitable for wind turbine dimensions.
LOCATIONS
209
SUPPLIERS
Nord-Pas de Calais.
MANUFACTURERS
ACTIVITIES
D
PARTNERS
BUSINESSES SELECTED
EADS ASTRIUM
Design and manufacture of wind turbine blades and related solutions
Avenue du Général Niox - BP 20011, 33165 Saint-Médard-en-Jalles
+33 (0)5 56 57 30 00
SUPPLIERS
MANUFACTURERS
TRAINING CENTRES
ORGANIZATION
E
Astrium is a wholly-owned subsidiary of the EADS group. It is dedicated to civil and military space systems and services
and launched a Wind Energy entity five years ago.
ACTIVITIES
Using its experience and expertise in the space sector, EADS Astrium develops innovative solutions for the wind power
sector. It designs differentiating technologies, provides maintenance support, and offers solutions to optimise energy
production for manufacturers of wind turbines and wind farm operators.To guarantee the reliability and competitiveness
of its services, EADS Astrium focuses its innovation on engineering activities (development and industrialisation of new
blades or kits for specific issues, analyses of blades damaged in operation, etc.) while aiming for optimisation of the
entire system. EADS Astrium provides clients with services they can trust and helps clients stay ahead of the competition:
• Design of light, reliable blades
• Licences for innovative solutions for specific needs: as lightning protection, blades with low radar interference, and
blades with linkages
• Manufacture of prototype and pre-series blades
• Optimisation, automation, and reliability-improvement in blade manufacturing processes (production lines, tools
and processes)
• Non-destructive inspection methods for blades on-site or coming off the production line
• Optimised wind farm operation solutions and energy storage management.
EADS Astrium also has a dedicated industrial site that can be used as needed for additional high-quality production.
LOCATIONS
Aquitaine.
210
PARTNERS
Manufacturer of equipment for special machines
100 rue Chalant, 59790 Ronchin
+33 (0)3 20 88 70 70
+33 (0)3 20 88 70 99
www.ecl.fr [email protected] [email protected]
ORGANIZATION
• 500-person site: Design, support, project management, and machine installation at the client’s site
• 250-person workshop: Scheduling, supplies, methods, project management, manufacturing and testing, quality, and ESS
• 8 subsidiaries with 250 employees: UAE, India, China, Australia, Canada, Netherlands, South Africa, Mozambique.
ACTIVITIES
• Steel plate cutting machines (plasma, laser, oxy-acetylene)
• Manual and automated welding, machining, painting/shotblasting, assembly (mechanical, hydraulic, pneumatic,
electrical, automation) and operational testing
• Parts from 15 kg to 50 tonnes with 47 bridge cranes from 5 to 50 tonnes; 60 davit arms.
LOCATIONS
211
SUPPLIERS
Nord-Pas de Calais.
MANUFACTURERS
SUBSIDIARY OF RIO TINTO ALCAN-
TRAINING CENTRES
BUSINESSES SELECTED
ECL
E
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
EDF EN SERVICES
SUBSIDIARY OF EDF ENERGIES NOUVELLES-
Operation, Maintenance
10 rue de la Jasse -ZA Viargues, 34440 Colombiers
+33 (0)4 67 09 82 00
www.edf-en.fr [email protected]
ORGANIZATION
A wholly-owned subsidiary of EDF Energies Nouvelles, EDF EN Services operates and maintains green power plants in
Europe for EDF EN and for third parties. The activity groups over 350 specialists dedicated to operation, maintenance,
and engineering services. EDF EN Services operates 1,261 MW of power through strategic partnerships with the
players in the sector. EDF EN Services has achieved certification for ISO 9001 (quality management), OHSAS 18001
(health and safety), and ISO 14001.
MANUFACTURERS
ACTIVITIES
Safety • Industrial risk management • Safety inspections, supervision and performance monitoring • 24/7 access
control (for plants and substations) • Remote systems reboots • Grid manager relations • Troubleshooting • Preventive
and corrective maintenance • Replacement of major wind farm components • On-call 7 days a week • Engineering
• Cutting-edge expertise in mechanics, electricity, and automation • End-of-warranty wind farm inspections • Resources
• Qualified personnel trained by the company • A cutting-edge monitoring centre for remote control of equipment, data
analysis, support to teams on the ground • Local maintenance offices to optimise lifespan and reduce production losses.
SUPPLIERS
LOCATIONS
E
Colombiers (Languedoc-Roussillon, head office), Saint-Gilles (Brittany), Caen (Lower Normandy), Saint-Quentin (NordPas de Calais), Toul (Lorraine), Salles-Curan (Midi-Pyrénées), Eyguilles (Provence-Alpes-Côte d’Azur), Fresnay-l’Évêque
(Centre), Losses (Aquitaine).
212
PARTNERS
6 rue des Essarts, 38610 Gières
+33 (0)4 76 42 63 69
+33 (0)4 76 42 63 70
www.egsol.fr [email protected]
ORGANIZATION
EG Sol was founded in 1993 when it set up its first office near Grenoble.
ACTIVITIES
EG Sol specialises in geotechnics, geology, project management of special foundation projects, the environment,
and expert assessment.
TRAINING CENTRES
BUSINESSES SELECTED
EG SOL
213
SUPPLIERS
Île-de-France, Lower Normandy, Brittany, Poitou-Charentes, Rhône-Alpes, Languedoc-Roussillon, and Provence-AlpesCôte d’Azur.
MANUFACTURERS
LOCATIONS
E
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
SUBSIDIARY OF EIFFAGE-
Construction - Civil engineering
6 rue Jean Rostand - BP 242, 76142 Le Petit-Quevilly cedex
+33 (0)2 35 58 82 00
+33 (0)2 35 68 12 49
www.eiffage.com [email protected]
ORGANIZATION
Within the Eiffage group, France’s third largest and Europe’s sixth largest group in the building and public works sector,
Eiffage Construction combines all the trades related to urban development, real estate, construction, operations,
maintenance, and facility management.
LOCATIONS
Le Havre - Rouen - Caen.
SUPPLIERS
MANUFACTURERS
EIFFAGE CONSTRUCTION HAUTE
NORMANDIE
E
214
Eiffage Construction Métallique is a subsidiary of the Eiffage group. Its historical metal construction business activities
include building, civil engineering structures, mechanical construction, boilermaking, industrial plants, and turnkey
contracts for various sectors, including the offshore industry. Eiffage Construction Métallique is present in France with
over 20 industrial sites and numerous construction sites, including one construction site on the Mediterranean coast
at Fos-sur-Mer mainly dedicated to the offshore industry and the construction of wind turbine masts.
ACTIVITIES
Backed by years of experience and its engineering resources, Eiffage Construction Métallique has the capacity to
develop any onshore or offshore project. Its manufacturing capabilities, skills, and expertise are recognised in major
projects, such as the Millau viaduct, which required 40,000 tonnes of steel, and in marine projects such as references
acquired in construction and installation in the offshore oil sector. Eiffage Construction Métallique has all the skills
and resources necessary to undertake major construction on land and offshore requiring considerable resources. In
2007, Eiffage Construction Métallique built a plant entirely dedicated to the construction of metal masts. The plant
has a capacity of 80 masts per year. The company recently expanded its onshore expertise to offshore applications
by acquiring the Smulders group. With over 10 years of experience, Smulders has manufactured over 950 steel
foundations for offshore wind turbines and is a world leader in this sector.
LOCATIONS
Île-de-France, Provence-Alpes-Côte d’Azur.
215
BUSINESSES SELECTED
PARTNERS
ORGANIZATION
TRAINING CENTRES
48/50 rue de Seine, 92707 Colombes cedex
+33 (0)1 47 60 47 00
+33 (0)1 47 60 47 05
www.eiffagemetal.com
MANUFACTURERS
Construction of foundations, masts, and electrical substations for offshore wind farms
SUBSIDIARY OF EIFFAGE-
SUPPLIERS
EIFFAGE CONSTRUCTION
METALLIQUE
E
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
SUBSIDIARY OF VINCI CONSTRUCTION-
Offshore Installation, equipment supplier, port operator, more products service
2 boulevard de l’Europe - CS 10128, 44603 Saint-Nazaire cedex
+33 (0)2 40 11 29 00
+33 (0)2 40 11 29 01
www.entreprise-emcc.fr [email protected]
ORGANIZATION
Foundations, port infrastructure, and service vessels, 250 floating units: jack-up platforms, floating cranes, dippers, suction
dredgers, multicats, and barges. Foundation equipment: cranes, drills, hydraulic drills, vibrodrills, rock-breaking masts, etc.
ACTIVITIES
Dredging and rock-breaking with and without explosives. Maritime, subaquatic, and river construction work: sheet
pile driving, bridge construction, jetties. Handling and installation of pre-fabricated items. Installation of sealines and
underwater outlet pipes.
LOCATIONS
Pays de la Loire.
SUPPLIERS
MANUFACTURERS
EMCC
E
216
PARTNERS
Ester Technopole - 1 avenue d’Ester, 87069 Limoges
+33 (0)5 55 36 28 39
www.encis-energiesvertes.com [email protected]
ORGANIZATION
For more than seven years, the engineering office of Encis Energies Vertes SAS and its independent, multi-disciplinary
team have been providing reliable, high-quality expert assessment of wind power potential to determine the production
of future wind farms.
ACTIVITIES
Encis Energies Vertes uses its expertise in renewable energy technical engineering to serve public and private project
owners.
Its primary wind power services include:
• Wind studies (collecting and analysing meteorological data, extrapolating this in the long-term, and modelling
wind resources)
• Calculations of production potential and optimising wind farm energy
• Financial simulations
• Technical and financial feasibility studies
• Wind farm safety reports
MANUFACTURERS
Technical and environmental engineering
TRAINING CENTRES
BUSINESSES SELECTED
ENCIS ÉNERGIES VERTES
LOCATIONS
217
SUPPLIERS
Head office in Limoges, Encis Energies Vertes’ team operates throughout France.
E
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
ENCIS WIND
Wind measurement - Aircraft warning lights
17 rue Charles Lindbergh, Parc d’activités d’Océalim, 87270 Couzeix
+33 (0)5 55 489 490
+33 (0)5 55 489 321
www.enciswind.com [email protected]
ACTIVITIES
Encis Wind offers project developers and wind farm operators turnkey installations of wind measurement masts. Encis
Wind also supplies and installs Obelux LED night-time aircraft warning light systems on all types of structures. Lights
are available in all intensities and are STAC-certified.
LOCATIONS
SUPPLIERS
MANUFACTURERS
The company is based in Limousin but operates throughout France, in neighbouring countries, and further abroad.
E
218
PARTNERS
High-pressure hydraulics
32 avenue de la Baltique, 91140 Villebon-sur-Yvette
+33 (0)1 60 13 68 68
+33 (0)1 69 20 37 50
www.enerpac.com [email protected]
ORGANIZATION
Enerpac is the undisputed world leader in high-powered tools and equipment used on the industrial market.
ACTIVITIES
Always at the cutting edge of technology, Enerpac has developed a range of products and solutions for the wind
power industry. Manufacturers of wind turbines and parts, installers, and maintenance and servicing providers can all
count on Enerpac for practical solutions. With its experience in products for the oil and gas industry, Enerpac provides
appropriate, sought-after solutions for both onshore and offshore installations.
LOCATIONS
219
SUPPLIERS
Île-de-France.
MANUFACTURERS
SUBSIDIARY OF ACTUANT CORPORATION-
TRAINING CENTRES
BUSINESSES SELECTED
ENERPAC
E
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Manufacture of wind turbines with a power rating of less than 36 kW
2 ZA La Cigalière, 84250 Le Thor
+33 (0)4 90 31 28 16
+33 (0)4 90 31 29 11
www.eole-system.com [email protected]
ORGANIZATION
Eole System is a French company founded in 2008. It is located in the Rhône valley, one of the windiest regions in
Europe. Eole System has invested heavily in R&D to develop simple, innovative products that are robust and reliable.
The company has an engineering office that can develop custom wind turbines for specific applications. It also designs
and builds helicopter blades, offering complete control of the aerodynamics and composite materials.
ACTIVITIES
Currently, Eole System’s catalogue features two wind turbine models: a 3 kW turbine 4.10 m in diameter, and a 10 kW
turbine 8 m in diameter. Eole System designs and develops wind turbines. Blades are manufactured and assembled
at its facilities. The company uses local suppliers (machiners, boilermakers, etc.) and works directly with installers,
providing them with all the materials necessary to complete an installation. Eole also trains installers in how to install
and maintain its equipment.
LOCATIONS
Provence-Alpes-Côte d’Azur (Vaucluse).
SUPPLIERS
MANUFACTURERS
EOLE SYSTEM
E
220
PARTNERS
BUSINESSES SELECTED
EOLECLEAN
Waste collection and management, clean-up
Rue de la Fère, 02100 Neuville-Saint-Amand
+33 (0)3 23 09 98 63
+33 (0)9 71 70 63 77
www.eoleclean.com [email protected]
TRAINING CENTRES
ORGANIZATION
• Teams of technicians and engineers
• Installation of containers for special waste
• Establishment of comprehensive clean-up procedures (technical, operational, and administrative aspects).
ACTIVITIES
Collection and management of waste from renewable sources, including wind power waste. Clean-up of wind farm
sites, collection and processing of photovoltaic panels.
MANUFACTURERS
LOCATIONS
221
SUPPLIERS
Picardy.
E
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
EOLTECH
Wind energy expert
39 chemin de Fournaulis, 31170 Tournefeuille
+33 (0)5 61 15 44 13
www.eoltech.fr [email protected]
ORGANIZATION
Established in 2002, Eoltech is an independent consultancy whose core business is focused on the analysis of the
wind resource. With over 10 years experience in this field, our company has expanded its range of services and is
now the leading French player in this market.
Totally independent from any project development, Eoltech is a trusted third party and thus meets the requirement of
independence which is necessary in the financing phase of wind projects.
SUPPLIERS
MANUFACTURERS
ACTIVITIES
E
From the assessment of the theoretical wind energy potential in the development phase of a project to the re-analysis
of the production data of wind farms in operation, Eoltech offers a wide range of services all related to the assessment
of the wind resource and the associated risks.
• Measurement and analysis of wind data,
• Assessment of wind potential in the development phase,
• Re-evaluation of wind potential of operating parks,
• Pre-diagnosis of operating wind farms,
• Control of the overall performance of operating parks,
• Estimation of the impact of project specific curtailments (noise, bats, etc.),
• Training.
These areas of expertise are offered to our clients mainly through technical assistance, audits and due diligence.
Whether on the French territory or abroad, Eoltech has gained significant experience with more than 5 GW of wind
projects analyzed for major players in the energy sector. Over 1.5 GW of these parks are currently in operation.
LOCATIONS
Midi-Pyrénées / France.
222
PARTNERS
Design and construction of small wind turbines
Route de la Châtaigneraie, 85120 Saint-Hilaire-de-Voust
+33 (0)2 51 50 10 99
+33 (0)2 51 00 50 38
www.eolys-re.com [email protected]
ORGANIZATION
SAS (simplified private limited company) with a capital of €100,000.
ACTIVITIES
Eolys Ressources et Energies is a manufacturer of wind turbines under 36 kW. Its product line is called ‘La Métronome’.
The company has three products: La Métronome 6 kW, La Métronome 12 kW and La Métronome 36 kW.
MANUFACTURERS
LOCATIONS
BUSINESSES SELECTED
SUBSIDIARY OF BOUY AUSARE-
TRAINING CENTRES
EOLYS RESSOURCES ET ENERGIES
223
SUPPLIERS
Pays de la Loire.
E
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
EPSILON COMPOSITE
Manufacture of carbon-fibre parts
5 route de Hourtin - BP 30 052, 33340 Gaillan-en-Médoc
+33 (0)5 56 73 47 74
+33 (0)5 56 73 40 80
www.epsilon-pultrusion.com [email protected]
ORGANIZATION
Epsilon Composite has its head office in Gaillan-en-Médoc (33) in France, and has a young, dynamic team of
150 employees (10% of whom work in innovation).The company has a worldwide market, with a turnover of €18 million
in 2008, 80% of which came from abroad (> 30% from Japan and 25% from Germany).
ACTIVITIES
Epsilon Composite is the world leader in the pultrusion of carbon-fibre shapes for diverse industries, including niche
markets, energy with offshore oil drilling and wind energy, civil engineering, and more.
Epsilon Composite is expert in the techniques of carbon fibre and epoxy resin pultrusion and pullwinding, and in
various bonding and assembly techniques.
With 20 pultrusion lines, Epsilon Composite produces more than 3.5 million metres of round technical profiles per
year, (Ø 6 to 200 mm tubes in standard production and solid rods Ø 6 to 25 mm), square tubes (30 x 30 mm to 101 x
101 mm), flat bars 30 to 200 mm long and 1.2 to 4 mm thick, parts made from these bars and special profiles in
various shapes. Epsilon Composite also includes HS, IM, HM, and UHM products (up to 450 GPa for some).
LOCATIONS
SUPPLIERS
Aquitaine.
E
224
PARTNERS
Cap Alpha - Avenue de l’Europe, 34830 Clapiers
+33 (0)4 67 59 30 35
+33 (0)9 81 70 30 65
www.erneo.fr [email protected]
ORGANIZATION
Erneo is an SAS (simplified private limited company) founded in 2009 by three doctors of electrical engineering. The
company stands out for its extraordinary ability to innovate. Backed by its experience in electric motors for cutting-edge
applications, such as aeronautics, Erneo has been developing high-performance magnetic generators since 2010
for the renewable energy sector. Its patented technology has received multiple national awards, including one from a
competition held by the Ministry of Research and one from the Tremplin PME competition.
BUSINESSES SELECTED
Manufacture of permanent magnet generators for small wind turbine applications
TRAINING CENTRES
ERNEO
Erneo designs and manufactures permanent magnet generators for small wind turbine applications. It offers direct drive
generators between 2 and 50 kW. Generators are sold in kits or assembled. Erneo offers customisation (adaptation of
mechanical interfaces and voltage levels) for perfect integration into various types of wind turbines. Our generators
are characterised by their high level of output, compactness, reduced use of materials and high reliability. They are
simple to connect and unlike other products existing on the market, can operate on both active rectifiers and simple
passive rectifiers without affecting performance.
LOCATIONS
MANUFACTURERS
ACTIVITIES
225
SUPPLIERS
E
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
ETAIR MEDITERRANEE
Maintenance of wind turbine blades
2 rue Lucien Vidie, 66600 Rivesaltes
+33 (0)4 68 52 88 15
+33 (0)4 68 63 54 51
[email protected]
ORGANIZATION
ETAIR Méditerranée is a SARL founded over 10 years ago. It has 47 employees working on difficult-to-access sites,
including 12 specialists in wind turbine blade maintenance.
ACTIVITIES
• Interior and exterior inspections and diagnostics of blades.
• Repair of composites (fibreglass, carbon, polyester, epoxy).
• Interior and exterior cleaning of masts, blades, and nacelles.
• Access methods: 2 cable platforms, ropes, telescopes, and drones.
• Electrical inspections of lightning arresters. Assistance assembling wind turbines.
• Regular preventive inspections. Laying of life lines (cables, rails, etc.)
• Work in confined spaces. Fast response to lightning damage.
• Lashing of rotors and blades to the ground.
LOCATIONS
SUPPLIERS
E
226
PARTNERS
BUSINESSES SELECTED
ETHM
SUBSIDIARY OF FIPAM GROUP-
Supply of harbour equipment
TRAINING CENTRES
1 avenue du président Georges Pompidou, 92500 Rueil Malmaison
+33 (0)6 07 04 43 02
+33 (0)1 41 39 22 57
www.ethm.com [email protected]
ORGANIZATION
SARL with a capital of €7,000. Part of the FIPAM group (financial company of shareholders).
ACTIVITIES
Specialist in mooring calculations for the definition and supply of fenders and mooring systems.
MANUFACTURERS
LOCATIONS
227
SUPPLIERS
Île-de-France, Upper Normandy, Lower Normandy.
The FIPAM group has locations in the Paris and Normandy region via its shipyards.
E
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
SUBSIDIARY OF CHARIER-
Civil works, foundations, maintenance
1 rue de la mer - ZI Caen Canal, 14550 Blainville-sur-Orne
+33 (0)2 31 72 35 37
+33 (0)2 31 72 64 62
www.charier.fr [email protected]
ORGANIZATION
ETV is the subsidiary of Charier specialising in civil works.
ACTIVITIES
ETV specialises in structural engineering, maritime construction work, driven foundations, industrial civil works, and
more recently, the construction of wind turbine foundations.
LOCATIONS
Lower Normandy. Operation in a 600 km radius.
SUPPLIERS
MANUFACTURERS
ETV
E
228
PARTNERS
BUSINESSES SELECTED
EUROPE TECHNOLOGIES
Composites,
p
mechanical pprojects,
j
engineering,
g
g R&D
2 rue de la Fonderie, 44470 Carquefou
+33 (0)2 51 70 04 94
+33 (0)2 51 70 05 83
www.groupe-et.com [email protected]
LOCATIONS
Pays de la Loire. Head office and most subsidiaries are located in Carquefou (Loire-Atlantique).
229
MANUFACTURERS
• Composites Department:
With the help of its engineering department, Europe Technologies develops parts made of composite materials for its
clients. Working together with the client, the company determines the best materials and manufacturing processes
to use and tests the outcome by building prototypes and creating a validation plan. Europe Technologies also
repairs parts made of composite materials. It has a department specialised in machining assessment and in-house
equipment for metal and composite-material parts, providing clients with turnkey solutions for machining optimisation,
programming, monitoring systems, and vibration analysis systems. Its instrumentation solutions and vibration analysis
solutions allow you to monitor the operation of a machine’s moving mechanical systems in real time to help reduce
maintenance operations.
• Technology Department:
Europe Technologies’ impact surface treatment (an innovative, patented ultrasonic process) helps extend the lifespan
of metal parts and structures subject to harsh conditions.
Shot-peening is used on mechanical parts subject to high stress, new parts, or as preventive maintenance (e.g. turbine
parts, gears, shafts, etc.)
Hammering welds helps put a finish on mechanically-welded structures, thus improving their resistance to the environment.
• Mechanics Department:
The mechanics division has methods and industrial means for the industrialisation of composite and metal parts
(definition of the machining procedure, cutting tools, fitting tools, and programming).
Europe Technologies has the facilities to machine large-scale items (X=8 m Y=3 m Z=2 m, for lifting of 30 tonnes) for
the production of parts and tools made of metal or composite materials.
ACTIVITIES
SUPPLIERS
The Europe Technologies group is comprised of three divisions–Composites, Mechanical projects, and Technology–and
works in various wind power sectors.
TRAINING CENTRES
ORGANIZATION
E
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
FAUCHE AUTOMATION AQUITAINE
SUBSIDIARY OF JP FAUCHE GROUP-
High- and low-current industrial electricity, process and automation, energy,
maintenance
ZI Pessac Canéjean - 9 rue Jean Perrin, 33600 Pessac
+33 (0)5 57 26 67 80
+33 (0)5 57 26 67 89
www.fauche.com [email protected]
ORGANIZATION
The JP Fauché group has been working in four areas of activity for over 45 years: industrial electricity, processes,
energy, and maintenance.
JP Fauché is a particularly well-known player in the design and construction of all types of power plant, including
biogas cogeneration plants, photovoltaic power plants and wind farms. JP Fauché has all the experience and expertise
necessary to execute turnkey industrial projects. In 2008, it had a turnover of €165 million.
ACTIVITIES
JP Fauché is a service provider to many prime contractors in a wide range of activities including aeronautics, the
military, hospitals, major retailers, hotels, and agrifood business.
It is heavily involved in the development of renewable energy, especially wind energy. It is an expert in building and
maintaining facilities for distributing wind-generated electricity, including supplies of delivery substations, inter-turbine
cables, mast foot cubicles, and dry-type transformers.
SUPPLIERS
LOCATIONS
F
The JP Fauché group currently has over 1,000 employees across 35 sites in France and Poland. Fauché Automation
Aquitaine has locations in Pessac (Gironde) and Dax (Landes) and is one of the subsidiaries specialising in wind power.
230
PARTNERS
BUSINESSES SELECTED
FAVIER TPL
Manufacture of insulatingg sheaths
Le Bourg, 63480 Bertignat
+33 (0)4 73 82 12 93
+33 (0)4 73 82 20 62
www.favier.com [email protected]
ACTIVITIES
In terms of electromechanical engineering applied to the wind power industry, Favier TPL’s sheaths are used in
particular in alternators, transformers, and electrical cabinets to provide dielectric, thermal, and mechanical protection
for winding outlets and cable bundles.
LOCATIONS
231
SUPPLIERS
Favier TPL has a subsidiary in the US and a network of agents in numerous countries.
MANUFACTURERS
With over 80 years of experience in the manufacture of braided insulating sheaths, Favier TPL is one of the European
leaders in this field.
65% of its production is exported to 40 countries around the world.
The main areas of application for its products are electromechanics, household appliances, vehicles, lighting, railways,
and metallurgy, etc.
TRAINING CENTRES
ORGANIZATION
F
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Manufacture of wind turbine blades
Hangar d’Afrique - Quai du Maroc, 76200 Dieppe
+33 (0)5 55 10 05 80
+33 (0)5 55 10 05 81
www.fdkomposites.fr [email protected]
ORGANIZATION
SARL (French limited liability company)
ACTIVITIES
• Manufacture of wind turbine blades for onshore and offshore activities
• ‘One-set’ technology to create a blade as a single piece
• Optimisation of lifespan and reliability, and costs over the life-cycle (maintenance) reduced by up to 20%
• Refitting and repowering of blades no longer being made
LOCATIONS
Located in Upper Normandy in Dieppe Port. Blades can be built near construction sites. Innovative technology allows
manufacturing sites to be built at low cost.
SUPPLIERS
MANUFACTURERS
FDKOMPOSITES
F
232
PARTNERS
Geotechnics
BP 767, 84035 Avignon cedex 9
+33 (0)4 90 31 23 96
+33 (0)4 90 32 59 83
www.fondasol.fr [email protected]
ORGANIZATION
FONDASOL, the leader in French geotechnics, can leverage over 50 years of experience in the field.
FONDASOL is an independent engineering office with 485 employees. It conducts nearly 8,000 geotechnical surveys
every year.
Since 2001, all of its investigations and engineering studies have been conducted in accordance with ISO 9001
quality management processes certified by Bureau Veritas Certification.
TRAINING CENTRES
BUSINESSES SELECTED
FONDASOL
FONDASOL’s engineers, experts, and teams are located in 27 local offices throughout France. Each office works with
one of three regional management departments in Lyon, Nantes, or Nice.
Its International Studies Management team in Avignon can help you with your projects abroad.
233
LOCATIONS
SUPPLIERS
With more than 3,000 wind turbine studies conducted since 2005 (in mission G11, G12, G2, and G4), FONDASOL
has become an essential partner to wind power companies.
With its experience in geotechnics which affects all areas of the construction industry and land-use planning, FONDASOL
has a thorough understanding of soil dynamics and has developed expertise specific to wind turbines.
FONDASOL is composed of a team of 110 experts and engineers which relies on a dynamic, efficient organisation
structure to provide clients with top-notch services: a scientific and technical department, a geophysics and geology
department, a department for complex investigations, and four laboratories (soil identification, mechanical testing
and testing on concrete, rocks, and aggregate, etc.).
FONDASOL can help you.
FONDASOL’s engineers assist clients at every stage of their project to solve any kind of geotechnical issue: pre-project
and project studies, geotechnical surveys and monitoring during execution, geotechnical supervision during execution
and geotechnical diagnostics.
MANUFACTURERS
ACTIVITIES
F
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Earthworks, access roads, and wind turbine foundations
Site Agroparc Bât. C1 - 200 rue Michel de Montaigne
BP 41223, 84911 Avignon cedex 9
+33 (0)4 32 74 15 60
+33 (0)4 32 74 06 22
www.fondasolutions.com [email protected]
ORGANIZATION
Fondasolutions is an independent company specialising in the construction of foundations for wind turbines.
ACTIVITIES
Founded in February 2004, Fondasolutions is the French arm of Schmees Bau in Germany, which has been an integral
part of the wind industry for over 10 years. The company has built more than 500 foundations in Germany, Belgium,
Austria, the Netherlands, Poland, and France. Fondasolutions can handle any project and provides comprehensive
civil engineering services: access roads, platforms, excavations, and foundations. Fondasolutions has developed a
special formwork system for its clients’ wind turbine foundations which saves time during assembly but still allows
the use of uses concrete and steel rebars.
LOCATIONS
SUPPLIERS
MANUFACTURERS
FONDASOLUTIONS
F
234
PARTNERS
82 avenue de Bammental, 51130 Vertus
+33 (0)3 26 53 21 96
+33 (0)3 26 53 02 03
www.fondeole.com [email protected]
ORGANIZATION
The product of a Franco-German partnership, Fondéole SAS has been operating in France since 2006.The combination
of its expertise and the experience of its founders makes Fondéole a sound value in wind power civil engineering.
ACTIVITIES
Fondéole offers a global service for all wind turbine infrastructures and all types of machines. Its solutions are designed
to meet wind turbine developers’ budgets and deadlines. Its integrated engineering office develops projects anywhere
in France and now also in Eastern Europe.The company operates in three main areas: foundation construction, roadway
construction, and the installation of buried networks.
LOCATIONS
235
SUPPLIERS
Fondéole is located in Champagne-Ardenne and has helped install more than 200 wind turbines in France, for a total
of approximately 500 MW of power.
MANUFACTURERS
Foundation work, roadways, and buried networks
TRAINING CENTRES
BUSINESSES SELECTED
FONDEOLE
F
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Anticorrosion zinc and aluminum anodes manufacturing - alloys trading
201 rue Jean Jaures, 56600 Lanester
+33 (0)2 97 76 14 81
+33 (0)2 97 76 65 12
www.anodes-carenage-corrosion.com [email protected]
ORGANIZATION
Zinc and aluminum foundry since 1987, foundry Hellin is specialized in casting of corrosion protection pieces for
submerged structures, also materials and alloys trading for mechanical workshops.
ACTIVITIES
Welded and bolted zinc and aluminum anodes manufacturing (supply vessels and pleasure boats, offshore wind
turbines structures, subsea pipes). Copper and copper alloys trading activity: bronze (UE7, UE12), aluminum bronze,
brass, copper.
LOCATIONS
SUPPLIERS
MANUFACTURERS
FONDERIE HELLIN
F
236
PARTNERS
Forged and seamless rolled rings
4 rue Jules Campagne, 59330 Hautmont
+33 (0)327 697 373
+33 (0)327 697 385
www.forgital.com [email protected]
ORGANIZATION
With 3 production plants, Forgital Group is leader on the market of seamless rolled rings. We are producing rings
from 300 mm to 8,200 mm with a maximum weight of 45 tons. We can supply rings in steel, stainless steel, super
alloys, aluminium, titanium etc… We can also deliver rings up to 12.000 mm diameter made from forged segments.
ACTIVITIES
We can deliver flanges for wind mills towers, either rough rolled or fully machined and drilled. Our metalurgical expertise
enables us to offer you the grade and the heat treatment condition which will answer your technical requirements.
We also produce rings for gear boxes.
LOCATIONS
237
SUPPLIERS
Forgital Dembiermont 59330 Hautmont,
Forgital Italie 36010 Seghe di Velo,
Forgital FMDL 42500 Le Chambon-Feugerolles.
MANUFACTURERS
SUBSIDIARY OF FORGITAL GROUP-
TRAINING CENTRES
BUSINESSES SELECTED
FORGITAL DEMBIERMONT S.A.S
F
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Lifting - Industrial maintenance - Industrial pipework - Industrial cleaning - Modular
construction - Logistics & storage
530 rue Mayor de Montricher - PA Les Milles, 13798 Aix-en-Provence cedex 3
+33 (0)4 42 24 57 57
+33 (0)4 42 24 57 76
www.foselev.com [email protected]
ORGANIZATION
1,800 employees, with 450 in the Lifting/Handling/Transport department.
ACTIVITIES
FOSELEV has developed a special offer for the “Wind Power” sector. FOSELEV offers a fully integrated service, including
lifting, installing and assembling parts, performed by highly-qualified, skilled workers.
LOCATIONS
Network of 64 offices (France and export).
SUPPLIERS
MANUFACTURERS
FOSELEV
F
238
PARTNERS
SUBSIDIARY OF PELICAN VENTURE-
Manufacturer of masts, foundation pparts and internal pparts for wind turbines
100 allée Hubert Curien - Espace Harfleur 2000, 71200 Le Creusot
+33 (0)385 779 800
+33 (0)385 779 810
www.franceole.com [email protected]
ORGANIZATION
FrancEole is a wholly-owned subsidiary of Pelican Venture. A French family holding based in Paris, Pelican Venture
supplies equipment for the energy markets with top-ranking companies in their cutting-edge activities.
FrancEole has two dedicated production sites and is France’s top provider of masts and foundation parts for wind
turbines. With the support of Pelican Venture, FrancEole has set up an organisation giving it sufficient operational
autonomy to satisfy the market, involving on-going professional training for its teams, quality initiatives and certifications.
TRAINING CENTRES
BUSINESSES SELECTED
FRANCEOLE
Île-de-France, Burgundy. Head office in Paris and with both of its production sites located in Burgundy [Creusot (Saôneet-Loire) and Longvic (Côte-d’Or), near Dijon], FrancEole is conveniently located near its clients and their projects, as
well as being near a historic steel centre for the qualification of its personnel.
The company’s location allows it to work on wind turbine projects and constructions anywhere in France and
neighbouring countries.
Contact: Mathias Regnier: +33 671 328 431, [email protected]
239
LOCATIONS
SUPPLIERS
Since 2003, FrancEole’s production sites have been manufacturing masts, foundation parts and internal parts for
wind turbines using its skill and expertise in steelworking. From delivery of the raw materials to when the masts are
handed over to the clients, FrancEole manages the purchase, manufacture, assembly, protection, and design of the
internal equipment for the segments in accordance with clients’ specifications while offering an unbeatable level of
quality control.
With its dedicated, specialised teams of nearly 200 qualified staff and large-scale equipment, FrancEole can produce
600 finished, ready-to-install mast segments each year.
Thanks to its experience and the engineering office abilities, FrancEole provides consulting services, optimises design,
and supplies and assembles the internal parts on its production of masts and for external demand.
FrancEole understands its customers’ needs, providing them with a quick-response unit specialising in on-demand
construction site services, including expert assessment, inspections, adjustments, internal and external repairs, painting
touch-ups, and more.
Major builders and budding companies alike trust FrancEole with their projects. To date, FrancEole has built nearly
2,500 mast segments that have been erected in France, Spain, Belgium, Germany, and England.
MANUFACTURERS
ACTIVITIES
F
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
FRANKI FONDATION
SUBSIDIARY OF FAYAT GROUP-
Special foundations
9-11 rue Gustave Eiffel, 91350 Grigny
+33 (0)1 69 54 21 00
+33 (0)1 69 54 21 10
www.franki-fondation.fr [email protected]
ORGANIZATION
Franki Foundation is one of the four companies making up the Foundations Division of the Fayat Group, the other
companies being Sefi-Intrafor, Sotraisol, and Sols et Fondations. Through these companies, the Fayat group offers
a complete range of technical solutions for all types of foundations and soil consolidation work (piles, micropiles,
supports, diaphragm walls and beams, injections and jet grouting, quarry consolidation, drilling, etc.).
The teams from Franki Foundation operate in the field of special foundations providing a full range of piles, supports,
and soil reinforcement techniques. Franki also has an engineering office that uses the latest technology to develop
reliable, economic solutions, and a materials centre that designs and adapts tools to the needs of particular projects.
LOCATIONS
Île-de-France, Upper Normandy, Pays de la Loire, Franche-Comté, Rhône-Alpes, Provence-Alpes-Côte d’Azur.
SUPPLIERS
MANUFACTURERS
ACTIVITIES
F
240
PARTNERS
Specialised in geophysics, G-tec has been a player at world level since 1993, assisting clients with risk management
by executing investigations on sites to allow decisions to be made concerning major land-development projects.
G-tec currently has over 50 engineering geologists, geophysicists, electronics engineers, oceanologists, and biologists.
ACTIVITIES
G-tec is an engineering office specialising in geophysical exploration, assistance, and consulting.
It is an expert in using and adapting the various methods to respond to all structural issues and issues concerning
the determination of soil and seabed subsoil characteristics.
Throughout wind turbine projects, G-tec responds to needs concerning knowledge of the seabed:
• Magnetometry and gradiometry: detection of UXO, wrecks, and cables
• Seismic refraction: characterisation, compactness and rippability of materials
• Seismic reflection: structure of geological layers
• Single- and multibeam bathymetry: morphology of ocean floors
• Sidescan sonar: cartography of the properties of ocean floors
• Design, supervision, and analysis of geotechnical surveys
• Drilling inspections
• Underwater imaging
• 4D sonar imaging: for monitoring and positioning during construction
• Impact studies and compilation of regulatory documentation
• Environmental monitoring.
G-tec owns its own equipment and vessels.
The company is ISO 9001:2008 certified and is in the process of becoming OHSAS 14001 certified.
LOCATIONS
Upper Normandy.
Dieppe, Le Havre, Rouen, and the Paris area.
241
MANUFACTURERS
ORGANIZATION
120 boulevard Amiral Mouchez, 76087 Le Havre cedex
+33 (0)2 35 24 76 17
+33 (0)9 72 11 68 21
www.g-tec.eu [email protected]
SUPPLIERS
Geophysics, geological engineering, hydrography, and environmental surveys
TRAINING CENTRES
BUSINESSES SELECTED
G-TEC SA
G
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
GANTOIS SA
Manufacture of metal cloth and fabric, perforated plates, netting, and formed products
BP 307, 88105 Saint-Dié-des-Vosges cedex
+33 (0)3 29 55 21 43
+33 (0)3 29 55 37 29
www.gantois.com [email protected]
ORGANIZATION
520 employees at 2 production sites.
6 business activities:
• Weaving and forming
• Perforated sheets for industry
• Equipment for industry and for quarries
• Fencing and protection for local authorities
• Architecture and the building sector
• Distribution
ACTIVITIES
Blade de-icing • Lightening protection • Electromagnetic compatibility • Electrical conductivity • Climbing safety
• Perimeter protection.
LOCATIONS
SUPPLIERS
Île-de-France • Lyon • St-Priest • Rennes • l’Hermitage • Lille • Wasquehal • Marseille • Bordeaux • Mérignac.
G
242
PARTNERS
1 rue John H. Patterson, 91345 Massy cedex
+33 (0)1 77 31 20 00
www.ge-energy.com sofi[email protected]
ORGANIZATION
GE’s Power Conversion business uses its expertise in power conversion systems to help drive the electric transformation
of the world’s energy infrastructure. We design and supply advanced products and systems to improve industrial
processes for a cleaner, more productive future. Power Conversion supplies specialised sectors such as energy, marine
applications, industry and related services.
We provide cutting-edge technology using rotating machinery, frequency converters and automation systems to serve
the energy sector, including oil and gas, energy production, and renewable energy.
ACTIVITIES
GE Energy’s Power Conversion unit is a world leader in converters for the wind power sector, having equipped over
25 GW of turbines. It is also a specialist in wind generators–mainly permanent magnet generators–of varying speeds,
from very low speed (direct drive) to standard- and medium-speed (hybrid) wind generators. Besides supplying
products, Power Conversion can help you optimise both the entire powertrain and the quality of the energy produced,
and thanks to its engineering expertise, it can adapt wind farms to grid codes. Its innovations include high-temperature
superconductivity prototypes.
BUSINESSES SELECTED
Energy conversion
TRAINING CENTRES
SUBSIDIARY OF GENERAL ELECTRIC-
MANUFACTURERS
GE ENERGY POWER CONVERSION
243
SUPPLIERS
Lorraine, Île-de-France and Franche-Comté. Generator and motor plant in Nancy. Converter assembly workshop in
Massy. Engineering and R&D centres in Belfort and Massy.
LOCATIONS
G
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
9 boulevard de l’Europe, 21800 Quétigny
+33 (0)3 80 48 93 20
+33 (0)3 80 48 93 30
www.geotec-sa.com [email protected]
ORGANIZATION
Géotec has been manufacturing and selling tools specifically for soil and foundation studies since 1985.
ACTIVITIES
Géotec provides services and consulting in two main areas:
• Building and civil works: mechanical soil services, foundation and geology studies, including in situ surveys and testing
• Underground water and the environment (specifically, landfill and contaminated soil): hydrogeology services and
environmental studies, including water regulations, impact studies, pollution diagnostics, and sampling of polluted soil.
Géotec generally works in two phases:
• In situ surveys and testing by field teams
• Analysis and study of survey data performed by engineers, followed by a study report.
LOCATIONS
Géotec currently has around twenty offices and subsidiaries throughout France.
SUPPLIERS
MANUFACTURERS
GEOTEC
G
244
PARTNERS
Manufacture of large cast parts
2 rue de Flandres, ZI du Drout, Local 5.12, 68100 Mulhouse
+33 (0)3 89 43 13 10
+33 (0)3 89 60 14 02
www.geotech.fr [email protected]
ACTIVITIES
Geotech Industries specialises in the study, manufacture and sale of industrial parts and assemblies. It works in the
automotive, aerospace, railway, military, defence, and telecommunications industries.
LOCATIONS
245
SUPPLIERS
MANUFACTURERS
Alsace.
TRAINING CENTRES
BUSINESSES SELECTED
GEOTECH INDUSTRIES
G
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
GINGER CEBTP
SUBSIDIARY OF GINGER GROUP-
Geotechnical surveys, expert assessment, project management, inspections, analysis
12 avenue Gay Lussac, ZAC La Clef-Saint-Pierre, 78990 Elancourt
+33 (0)1 30 85 24 00
+33 (0)1 30 85 24 30
www.ginger-cebtp.com [email protected]
ORGANIZATION
Ginger CEBTP is a company specialising in building assessment and civil works.
ACTIVITIES
Ginger CEBTP is specialised in geotechnical surveys for: marine construction, civil engineering structures, masonry
mechanics and masonry pathology, geotechnics and structural restoration. Ginger CEBTP is proud to offer the following:
• Expert assessment, engineering, turnkey projects, and maintenance,
• A unique synergy of knowledge drawn from engineering offices, analysis, testing, and inspections laboratories,
• The ability to execute any project related to the design, construction, and maintenance of infrastructure and equipment
to help improve the quality and safety of living conditions,
• An offer and global project management coordinated by a single contact person, for more efficient communication
at all stages of work and greater reliability in project execution, for both project management and turnkey projects.
LOCATIONS
SUPPLIERS
Ginger CEBTP has a network of nine regional centres and 45 offices in France with over 900 employees.
G
246
PARTNERS
BUSINESSES SELECTED
GKN STROMAG FRANCE - SIME
BRAKES
SUBSIDIARY OF GKN LAND SYSTEM-
Manufacture of disc brakes
ORGANIZATION
Stromag France is a company wholly-owned by GKN Land System. Founded in 1927, GKN Stromag France has
160 employees and is the world leader in industrial disc brakes. GKN Stromag France exports over 60% of its production
through its subsidiaries, agents and distributors worldwide.
ACTIVITIES
The company is the No.1 on the industrial disc brake market. The GKN Stromag adventure started in 1927 with the
creation of SIME. Originally a manufacturer of electromagnetic separators for the mining and steel industries, the
company soon expanded into designing industrial brakes. It began selling jaw brakes in 1945, then introduced the first
industrial disc brakes to the steel industry in the early 1960s. Thanks to its consistent focus on the evolving needs of
the market and the desire to orientate its development around quality, innovative products, the company’s reputation
has spread rapidly, reaching every continent. Today, 60% of its turnover comes from exports. SIME operates in fastgrowing markets, such as wind power and port logistics, as well as in traditional industries, such as steel, nuclear, and
passenger transport, and has acquired skills of world renown.
LOCATIONS
Centre.
MANUFACTURERS
[email protected]
247
SUPPLIERS
www.stromagfrance.com
TRAINING CENTRES
Avenue de l’Europe, 18150 La Guerche-sur-l’Aubois
+33 (0)2 48 80 72 72
+33 (0)2 48 74 05 24
G
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
GROUPE INICIA - FLUIDEXPERT /
NOVIUM
Power transmission and control systems
21 rue Ampère - ZA les Blettrys - BP 70314, 71530 Champforgueil
+33 (0)3 85 47 89 00
+33 (0)3 85 41 69 28
www.hydro3m.fr [email protected]
ORGANIZATION
SARL (French limited liability company) with 97 employees.
ACTIVITIES
Fuidexpert/Novium is a specialist in industrial hydraulics and power transmission via pressurised fluids up to 1,200 bars
for stationary installations.
• Sale of hydraulic and pneumatic spare parts and accessories
• Troubleshooting and repairs of hydraulic parts
• Design, manufacture, and installation of hydraulic power plants, entire industrial automation assemblies and
didactic benches
• Preventive maintenance at industrial sites
• Training of clients in hydraulics. Certified teaching body since 1994
• Activities specific to EDF equipment
• Railway specialist.
SUPPLIERS
LOCATIONS
G
Burgundy. Rhône-Alpes. Paris area and South-West.
248
PARTNERS
SUBSIDIARY OF PROTECTOR-
Surface treatment : hot dip galvanizing & powder coating
Z.I la Gare, 56460 La Chapelle Caro
+33 (0)2 97 74 76 56
+33 (0)2 97 74 81 37
www.prestia.fr [email protected]
ORGANIZATION
Anti-corrosion surface treatment specialist (hot dip galvanizing + powder coating). Prestia is a leader in the north
of France. Prestia guarantees a high quality level, large services offers (container, packaging, training, audits, etc.).
ACTIVITIES
TRAINING CENTRES
BUSINESSES SELECTED
GROUPE PRESTIA
MANUFACTURERS
Hot dip galvanising, powder coating, shot-blasting, metallisation, dedicated logistics. Prestia is well recognized for duplex
treatments (anticorrosion + esthetics). Prestia offers you an offshore specific treatment. We are qualisteelcoat labelized.
LOCATIONS
249
SUPPLIERS
Prestia is a leader in the north of France.
G
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
GUERTON
uerton
SUBISDIARY OF NAWI GROUP-
Heavy boilermaking - Storage silos - Manufacture of parts for wind turbine masts
Z.I. Saint Gilles RN 10, 28800 Bonneval
+33 (0)2 37 97 56 00
+33 (0)2 37 96 22 36
www.guerton.com [email protected]
ORGANIZATION
Guerton is one of the companies in the Nawi Group specialising in heavy boilermaking. Guerton currently employs
70 men and women with the skills and expertise necessary to respond promptly to clients’ needs and the motivation
to satisfy them. Guerton has been qualified by GSI-SLV Saabrücken to execute steel structures in accordance with
standards EN 1090-1 and 1090-2 and by DEKRA for its ISO 9001 quality management system.
MANUFACTURERS
ACTIVITIES
Guerton is acknowledged for its experience in three main areas of activity: the manufacture of storage silos, pressure
devices, and sheet metal constructions. Guerton has also decided to diversify into the promising onshore and offshore
renewable energy markets, manufacturing wind turbine mast bases. To date, the company has produced more than
400 turbine mast bases of 3 to 4.5 m in diameter and 25 to 50 mm thick. All processing operations take place in its
workshop, including oxy-acetylene sheet metal cutting, rolling of cylindrical and conical sections, approach, welding,
non-destructive testing, flange facing for tight tolerances, shot-blasting and surface treatments, welding and assembly
of internal parts (platforms, railings, etc.), and storage at farms.
SUPPLIERS
LOCATIONS
G
Guerton is located 100 km from Paris, in Eure-et-Loir. The site covers 60,000 m2 of land and includes 10,000 m2 of
workshops.
250
BUSINESSES SELECTED
nawi
PARTNERS
!HQSGNE@MDV
EQDMBGHMCTRSQH@KFQNTONE
ANHKDQVNQJR@MCL@HMSDM@MBD
MANUFACTURERS
RP
F
SH
X
R
LJU
Z
QD
Z
ZZ
21$1'2))6+25(:,1'785%,1(6
/QNUHCHMFENTMC@SHNMR@MCEDQQTKDRENQVHMCSTQAHMDSNVDQR
2SNQ@FD(-TBKD@Q
%211(9$/ /DSQNBGDLHRSQX
"GDLHRSQX( QLR
%NNCOQNBDRRHMF
6@SDQSQD@SLDMS
-TBKD@Q
/G@QL@BX
.t.i
irod sisa
maintenance
3GDQLNMTBKD@Q
5@BTTLQDRD@QBG
QLR((MCTRSQX
(MCTRSQH@K
SQ@MREDQ
-DVVNQJR
251
SUPPLIERS
-TBKD@Q("GDLHRSQX
/G@QL@BX(1DRD@QBG
%NNCOQNBDRRHMF
gYDKC@- 6(&1.4/$2 2VHSG@B@OHS@KNEŵ2(1$-1"2/ 1(29(+DR!¤SGTMDR UDMTDCD!NTQFNFMD2 (-3.4$-+ŗ 4,-$%1 -"$
TRAINING CENTRES
groupe
X
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
HAWE-OTELEC SAS
SUBSIDIARY OF HAWE HYDRAULIK SE-
Manufacturer of hydraulic systems and components
13 rue des Pyrénées, ZAC du Bois Chaland - CE 561, 91256 Evry cedex
+33 (0)1 69 47 10 10
+33 (0)1 60 79 20 48
www.hawe.de [email protected]
ORGANIZATION
HAWE Hydraulik has been designing and producing quality hydraulic parts for targeted markets for 60 years. HAWE
Hydraulik has a worldwide presence, with 1,800 employees in its 13 subsidiaries and 30 distributors.
ACTIVITIES
HAWE Hydraulik’s exclusive use of steel for all its pressurised parts means that they can operate at high pressure
and have an extended lifespan in a compact assembly. Its leakless check valves are safe and energy-efficient. The
modular assembly of its constructions facilitates maintenance. The compactness and moderate weight of the units
mean no special handling equipment is required. The main components used in the wind power industry are compact
power plants, high-pressure radial piston pumps, poppet valves, hydraulic manifolds (study and manufacture of), and
cartridge valves.
LOCATIONS
SUPPLIERS
French head office in Evry (Essonne), with regional sales engineers and a network of partners.
H
252
PARTNERS
SUBSIDIARY OF TOTAL-
Design and manufacturing of flexible connections and/or antivibration systems
2 rue Balzac, 75384 Paris cedex 8
+33 (0)3 89 39 60 15
+33 (0)3 89 39 89 62
www.hutchinson.fr [email protected]
ORGANIZATION
Founded in 1853, HUTCHINSON is partner of the world’s top manufacturers dealing with safety, energy management,
reliability and comfort. Its close-to-customer technical centers design and produce a complete array of components
and systems using elastomers, other polymers and composite materials in 4 main activities: Sealing, Fluid Transfer,
Thermal, Vibration and Acoustic Insulation, Mobility and Transmission.
We have been widely involved in advanced technologies, particularly related to Marine activities: Navy, Offshore Oil&Gas...
TRAINING CENTRES
BUSINESSES SELECTED
HUTCHINSON
HUTCHINSON provides a wordlwide footprint through its 95 locations in 23 countries. More specifically, its French
subsidiaries Paulstra and Techlam offer dedicated to wind energy applications.
253
LOCATIONS
SUPPLIERS
We provide a full range of rubber products for motion, shock, vibration and sealing control in the most severe
environment. We promote innovative solutions adapted for any current and future developments dedicated to Marine
Renewable and Wind Energies.
Potential main applications are: Articulations for high cycling load and pressure, Anchoring devices, Bending restrictors,
Fenders, Gearbox Mounts, Installation assistance devices, Vibration and shock Absorbers
Main advantages of our solutions are:
• Easy to install and to use
• Performance and reliability
• Life duration, high operating fatigue resistance
• Free of maintenance and of operating cost
MANUFACTURERS
ACTIVITIES
H
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Manufacture of filtration and cooling systems
Technopôle Forbach Sud - BP 30260, 57604 Forbach
+33 (0)3 78 29 26 00
+33 (0)3 87 85 90 81
www.hydac.fr [email protected]
ORGANIZATION
With over 7,000 employees worldwide, Hydac is a leading company in the field of fluid technology, hydraulics, and
electronics.
ACTIVITIES
Hydac works on cooling and filtration systems for nacelles and for cable attachments inside wind turbine masts. As a
systems and fluids specialist, Hydac offers à la carte services ranging from cleaning to comprehensive maintenance,
including system optimisation. Hydac strives to increase machine availability and reduce breakdowns. Hydac’s
components are found in many wind turbines around the world and include complete systems and filtration concepts
for lubrication and hydraulics, cooling systems for transmission fluid and generators, and cable attachment systems
inside turbine masts.
LOCATIONS
Geographical coverage throughout France. Head office in Lorraine (Forbach). Offices in the Paris area, Lyon, Aix-enProvence, Bordeaux, and Montbéliard.
SUPPLIERS
MANUFACTURERS
HYDAC
H
254
PARTNERS
7KH+<'$&FRPSRQHQWVDUHLQVWDOOHGLQPDQ\
:LQG7XUELQHVWKURXJKWKHZRUOGDV
&RQGLWLRQPRQLWRULQJRIRLOFOHDQOLQHVV
DJHLQJLQK\GUDXOLFDQGOXEULFDWLRQRLOV
7HPSHUDWXUHUHJXODWLRQDQGOXEULFDWLRQV\VWHP
IRUWKHPXOWLSOLHU
&RROLQJRIJHDUER[DQGJHQHUDWRU
2SWLPL]HG¿OWUDWLRQIRUVHFXUHRSHUDWLRQ
DQGH[WHQGHGVHUYLFHOLIH
6\VWHPVDQGK\GUDXOLFFRPSRQHQWVIRUVDIHW\
DQG\DZEUDNHURWRUVWRSDQGSLWFKFRQWURO
255
SUPPLIERS
+<'$&6jUO
7pO
FRPPXQLFDWLRQ#K\GDFFRP
ZZZK\GDFFRP
TRAINING CENTRES
BUSINESSES SELECTED
:LWKRYHUHPSOR\HHVZRUOGZLGH
+<'$&LVRQHRIWKHOHDGLQJVXSSOLHUVRIÀXLG
WHFKQRORJ\K\GUDXOLFDQGHOHFWURQLFHTXLSPHQW
MANUFACTURERS
&RPSRQHQWV
6\VWHPVDQG6HUYLFH
IRU:LQG7XUELQHV
X
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
HYDRATIGHT SAS
SUBSIDIARY OF HYDRATIGHT LIMITED, ACTUANT GROUP-
Bolted assembly solutions and machining services
49-53 rue Salvador Allende, 95870 Bezons
+33 (0)1 34 10 57 17
+33 (0)1 34 10 50 81
www.hydratight.com [email protected]
ORGANIZATION
Hydratight has been providing world-class bolted assembly solutions and machining services to the oil and gas, energy
production, industry, aerospace, and subsea sectors for over 30 years.
Hydratight develops and sells products designed for the needs of the wind power sector. These products enable wind
turbine manufacturers to satisfy customer demand by reducing bolting times and achieving accurate bolt loads, first time.
MANUFACTURERS
ACTIVITIES
Hydratight sells and hires out:
• Hydraulic clamping solutions for bases, masts, and nacelles: hydraulic wrenches and hydraulic tensioners
• Hydraulic gensets
• Ultrasound measurements
• On-site machining services
• Training
LOCATIONS
SUPPLIERS
Hydratight operates around the world through a network of 35 strategic sites and a team of 1,000 employees.
H
256
PARTNERS
Geotechnical, geological, hydrogeological, and hydrological engineering applied to
buildings and the environment. Civil engineering, infrastructure, surveys, in situ and
laboratory soil tests
TRAINING CENTRES
28/30 avenue Jacques Anquetil - BP 90226, 95192 Goussainville cedex
+33 (0)1 34 38 73 63
+33 (0)1 39 88 58 23
www.hydrogeotechnique.com [email protected]
BUSINESSES SELECTED
HYDROGEOTECHNIQUE
ORGANIZATION
Société Anonyme (Limited liability company).
ACTIVITIES
MANUFACTURERS
Backed by a 70-strong team of engineers, Hydrogéotechnique is a specialist in geotechnical engineering. It performs all
geotechnical tasks, G11 and G12 geotechnical feasibility, G3 project execution, G4 geotechnical supervision, and G5
geotechnical diagnostics. It has the capabilities to perform investigations in situ (56 units) or in a laboratory (10 units).
LOCATIONS
257
SUPPLIERS
Twenty-four regional offices across France (excluding overseas departments and territories).
H
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SUPPLIERS
H
HYTORC
Torque tightening tools, hydraulic wrenches
18 avenue de la République, 91370 Verrières-le-Buisson
+33 (0)1 69 20 01 53
+33 (0)1 73 76 89 16
www.hytorc.fr [email protected]
ACTIVITIES
Development, sale, hiring, on-site assistance, and training in hydraulic torque-tightening tools:
• Hydraulic torque wrenches
• Pneumatic and electric drills
• Impact sockets and bolting accessories
• Mechanical tensioners and reaction washers.
With 40 years of experience and over a hundred patents filed for hydraulic torque wrenches, HYTORC can be considered
to have set the bar for high-power torque tightening. Whether you are a manufacturer, installer, or maintenance
provider, HYTORC’s teams are ready to help you with your requests for development, special programmes, etc. With most
varied and comprehensive line of products on the market, we will find a solution together. We can also create tools
for you that are specially adapted to your technical needs and safe and ergonomic to use. We can help you develop
customised use sheets and provide preventive maintenance and after-sales service for our tools at our own centres.
LOCATIONS
HYTORC operates throughout France via representatives and regional offices:
• Brittany, Nord, and Île-de-France: Le Mans (Pays-de-la-Loire)
• Port-de-Bouc (Provence-Alpes-Côte d’Azur)
• Central east: Tassin-la-Demi-Lune (Rhône-Alpes)
• Southwest: Saint-Loubès (Gironde).
It also operates in Europe and worldwide.
258
PARTNERS
Industrial Supply Chain logistics provider
ZAC de Cadréan - BP 55, 44550 Montoir-de-Bretagne
+33 (0)2 40 90 70 25
+33 (0)2 40 00 12 56
www.idea-groupe.fr [email protected]
ORGANIZATION
S.A.S. with assets of 1,270,000 €, IDEA Logistique is subsidiary of IDEA Groupe with 76 M€ turnover in 2012 and
750 employees.
ACTIVITIES
Industrial Supply Chain logistics provider for specific and sensitive products, IDEA offers comprehensive and dedicated
solutions. Strengthened by ten years of experience in the energy market, IDEA works with its customers on traditional
sectors (nuclear, power stations...) as well as promising new markets such as off shore windmills or solar energy. IDEA
is a partner for projects of leading actors such as ALSTOM, AREVA, EDF, MAN, SYSTOVI...
Our activities: Project engineering, Management and IT systems, Subcontractor management, Customer Service, Supplier/
Vendor-Managed inventory, Supply of assembly lines, Production outsourcing, Stock management, Preparation of Orders,
Kitting, Delayed differentiation, Shipping Management, In situ and Ex situ operations. IDEA daily manages flows of
offshore windmills components and we rely on a solid network of partners who have additional specific competencies.
MANUFACTURERS
SUBSIDIARY OF IDEA GROUPE-
TRAINING CENTRES
BUSINESSES SELECTED
IDEA LOGISTIQUE
LOCATIONS
259
SUPPLIERS
• French west region (Nantes, Saint-Nazaire, Cherbourg)
• Ile-de-France (South of Paris)
• French north region (Lille)
• French South West region (Toulouse)
• French South East region (Lyon)
I
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
IDEOL
Floating foundation solutions for offshore wind farms
Espace Mistral Bât. B - 375 avenue du Mistral, 13600 La Ciotat
+33 (0)4 86 20 80 50
www.ideol-offshore.com [email protected]
ACTIVITIES
IDEOL specialises in designing and installing new foundation solutions for offshore wind farms. Based in La Ciotat in
France, IDEOL has extensive experience in renewable energy and industries related to offshore oil and gas. In particular,
it develops floating foundation solutions based on its patented Damping Pool® technology aiming to achieve a major
transformation of the offshore wind energy potential, regardless of depth. IDEOL has received the Tremplin PME
Innov’Eco award, the 2012 Cleantech Republic grand prize, the Trophée 2012 innovation award for the Aubagne-La
Ciotat development area, and a prize at the national competition for the creation of innovative technology companies,
held by the Ministry of Research in 2011.
SUPPLIERS
MANUFACTURERS
LOCATIONS
I
260
PARTNERS
BUSINESSES SELECTED
IFM ELECTRONIC
Manufacturer of CMS solutions ((vibration analysis)
y )
Immeuble Uranus, 1-3 rue Jean Richepin, 93192 Noisy-le-Grand cedex
+33 (0)8 20 22 30 01
+33 (0)8 20 22 22 04
www.ifm.com/ifmfr/web/home.htm [email protected]
IFM ELECTRONIC is an international group specialising in the manufacture of electronic sensors. We have over 3,000
employees and are present in 70 countries around the world.
ACTIVITIES
MANUFACTURERS
IFM offers a various ranges of products for the wind power industry:
• Condition monitoring systems and vibration analysis systems
• Pressure sensors and transmitters
• Temperature sensors and transmitters
• Level probes
• Inductive sensors
• Safety sensors
• Rotation controllers
• Encoders
• Switched-mode power supplies
• Connectors with shielded cables
TRAINING CENTRES
ORGANIZATION
261
SUPPLIERS
Pays de la Loire, Rhône-Alpes.
Nantes office: Parc d’activité EXAPOLE, Bâtiment D, 275 boulevard Marcel Paul, BP 90397, 44819 Saint-Herblain cedex
Lyon office:“Bois des Côtes II”, 304 Route Nationale 6, 69578 Limonest cedex
LOCATIONS
I
X
SUPPLIERS
262
© ENERTRAG
MANUFACTURERS
TRAINING CENTRES
BUSINESSES SELECTED
PARTNERS
PARTNERS
ZA La Grande Halte, 29940 La Forêt Fouesnant
+33 (0)2 98 51 41 75
+33 (0)2 98 51 41 55
www.invivo-environnement.com [email protected]
ORGANIZATION
IN VIVO is a 30 people oceanographic and marine environmental consultancy company created in 1997. Working in
the field and availing of extensive facilities at sea and a wide range of instrumentation, IN VIVO is autonomous and
efficient right from the initial collection of data at sea. IN VIVO specialises in data collection, processing, interpretation
and use, in particular presentation of cartographical data (GIS), and project management and execution of surveys.
ACTIVITIES
LOCATIONS
La Forêt Fouesnant, Brittanny.
Carqueiranne, Provence-Alpes-Côtes d’Azur.
263
SUPPLIERS
IN VIVO provides studies and services for coastal works project developers as marine renewable energies and harbour
works. With extended and multidisciplinary knowledge of marine environment and a strong field experience, IN VIVO
has been involved in offshore windfarms, tidal turbines and ocean wave energy projects development since 2006,
from pro-project site surveys to legal authorization reports and environmental monitoring.
Hydrography, geophysics, currents, sediments, marine fauna and flora expertise, ornithology, acoustic noise measurement:
IN VIVO specialist teams work in the field with state of the art equipment at sea.
A leading consultancy company, with strong experience and knowledge of marine environment, IN VIVO watches
carefully the evolutions of regulations and techniques to carry environmental impact assessment and regulatory
studies required by the authorities.
IN VIVO also specializes in artificial reefs, fishing preservation and Natura 2000 inventories and spends 20% of its
time on R&D on its expertise areas.
MANUFACTURERS
Oceanography and marine environment consultancy
TRAINING CENTRES
BUSINESSES SELECTED
IN VIVO
I
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
INGETEAM SAS
Manufacturer specialising in power electronics
140 rue Carmin - Le Naurouze C, 31670 Labège
+33 (0)5 61 25 00 00
+33 (0)5 61 25 00 11
www.ingeteam.com [email protected]
ACTIVITIES
Manufacturer of inverters for the wind and photovoltaic power industry, wind generators, electronic automation for
renewable energy, and turnkey solutions for biomass, biogas, hydroelectricity, smart grids and thermodynamic solar
power, wind turbine and photovoltaic panel maintenance, grid voltage regulation, battery storage systems, power grids
in remote areas, and electric vehicle chargers.
LOCATIONS
SUPPLIERS
MANUFACTURERS
Midi-Pyrénées.
I
264
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Experience in wind.
Service partnership.
With + 3 GW of Wind Installed Capacity O&M
projects worldwide, Ingeteam Service can
provide you flexible solutions for wind farm
Services. Since 1999 Ingeteam Service has
been immersed in the Renewable Maintenance
Sector, gaining an intense technical background.
Wind Maintenance and Exploitation
End of Warranty Audits
Blades Services
Spare parts supply
[email protected]
READY FOR YOUR CHALLENGES
265
www.ingeteam.com
SUPPLIERS
\
\
\
\
MANUFACTURERS
The formula of the new energy
X
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SUPPLIERS
I
ITRON
SUBSIDIARY OF ITRON INC.-
Design and manufacture of electrical components
Avenue des Temps Modernes, 86361 Chasseneuil-du-Poitou
+33 (0)5 49 62 70 00
+33 (0)5 49 62 70 89
www.itron.com [email protected]
ORGANIZATION
Itron is the world leader in the supply of intelligent metering technology, data collection systems, and software solutions
for water and energy distributors.
ACTIVITIES
We are the world’s number one provider of solutions for intelligent metering, data collection, and metering data
management. Nearly 8,000 distributors around the world trust us to help them optimise their water and energy
supply and consumption. We offer electricity, gas, water, and thermal energy metres, communication infrastructure
and systems for metering data collection (AMR and AMI), data management software solutions and services such as
project management, installation, and consulting.
We sell innovative solutions to help integrate electricity produced by wind- and photovoltaic-powered production
sources while ensuring that grids remain completely safe and stable.
LOCATIONS
Poitou-Charentes.
Itron has been strongly established in France for over 130 years, with six production sites, an administrative/sales
office, four research and development centres and over 1,000 employees.
266
PARTNERS
BUSINESSES SELECTED
JADE
Work at height,
g trainingg and design
g safetyy systems
y
9 rue des Lainiers - P.A. du Beck, 59150 Wattrelos
+33 (0)3 20 68 99 47
+33 (0)3 20 68 99 48
www.reseau-jade.com [email protected]
• Development:
Safety system devising and supplying (innovative anchorage system Ancravie, ladders with safety rails, ...)
• Engineering:
Fitting the blades together - Setting up fall protection safety sytems : access ladders, anchorage points, life lines –
supervising all services (set up and maintenance)
Setting up elevators and access help systems
• Maintenance:
JADE’s work teams provide clients with maintenance for all work at height - confined spaces and dangerous work
environment - Supervising and repairing blades - Welding – checking on PPE (COFREND Certification level 2) - Anticorrosion paint - Non-destructive control – concrete and steel thickness, ...
Yearly checking on fall protection equipment and safety systems
• Training:
330ft high windmill at JADE’s training facilities for practical exercises: access at height, rescuing and evacuating
people - Rope access training (IRATA, CQP1, CQP2)
LOCATIONS
MANUFACTURERS
ACTIVITIES
JADE is a work at height and safety consultancy business which has been holding expertise in these fields for 16 years.
JADE supplies 3 complementary services which offer a package solution for safety in work at height and rescue:
• Quality rope access, work at height and safety systems supplying
• Specialist safety training centre – real technology training facilities with access to a 330ft high windmill
• Fall arrest systems – design and supply
JADE’s fifty technicians are ready to step in anywhere in France, Belgium, Luxemburg and the Netherlands, offering
top quality and safe work at height at a good rate.
JADE - MASE, VCA, QUALIBAT 1452, COFREND certifications.
JADE – a firm with assets of 1.2 million euros realizing a 5.5 million euro turnover.
TRAINING CENTRES
ORGANIZATION
267
SUPPLIERS
Lille, Dunkerque, Auray, Grenoble, Brussels.
J
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Manufacture of mechanical parts
ZI Le Tronchon BP36, 17 rue Jean Elysée Dupuy,
69542 Champagne-au-Mont d’Or cedex
+33 (0)4 37 49 74 80
+33 (0)4 37 49 74 83
www.jameswalker.biz [email protected]
ACTIVITIES
Designer and builder of sealing systems:
• Research and production of high-performance elastomers
• Development of designs for specific applications
• Numerous patented products, like the Rotabolt®, a bolt tension control system.
As a technical expert, JW:
• Helps clients upgrade their technology
• Offers comprehensive solutions that include designs, plans, and mounting the seals.
LOCATIONS
Rhône-Alpes.
SUPPLIERS
MANUFACTURERS
JAMES WALKER
J
268
PARTNERS
Welding, Machinning, Painting and Stucture Assembly - Subcontracting, codevelopment, execution
41 boulevard des marchandises, 85260 L’Herbergement
+33 (0)2 51 42 86 72
+33 (0)2 51 42 47 34
www.jefmag.fr [email protected]
ORGANIZATION
Jefmag is an equipment manufacturer supplying components and complete assemblies to its customers.
Jefmag is located in the West of France, south of Nantes. In a 15 000 m² workshop, Jefmag produce welded, machined,
painted and assembled technical structures.
Since 1977, thanks to its industrial know-how and equipment, Jefmag has been assisting its customers from the design
to the manufacturing stage, guaranteeing that their quality, cost and timeline requirements are met.
TRAINING CENTRES
BUSINESSES SELECTED
JEFMAG
LOCATIONS
PRODUCTION:
To mass-produce parts from 5 kilos to 5 tonnes in weight, and up to 7,50m in length, Jefmag has a wide range of
state-of-the-art equipment, which are operated by trained personnel.
We have:
• Bending and forming presses,
• 10 robot welding stations,
• 60 manual welding stations,
• 10 machining centres,
• Dynamic and static paint facilities,
• An assembly workshop.
QUALITY:
Jefmag has obtained certifications which guarantee that your quality requirements are met:
• ISO 9001 for the quality management system ;
• NF EN 15 085 class 1 for our welding know-how.
CUSTOMER SUPPORT:
Jefmag assists its customers from design to deliveries by even studying logistics solutions to make deliveries directly
to assembly sites.
MANUFACTURERS
ACTIVITIES
269
SUPPLIERS
Jefmag is located in Vendée, a few kilometers from Nantes, St-Nazaire or Noirmoutier.
J
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
JEUMONT ELECTRIC SAS
SUBSIDIARY OF ALTAWEST GROUP-
Electromechanical construction
367 rue de l’Industrie - BP 20109, 59572 Jeumont cedex
+33 (0)3 61 99 96 00
+33 (0)3 61 99 97 33
www.jeumontelectric.com [email protected]
ORGANIZATION
Société par Actions Simplifiée (simplified private limited company) with a capital of €16,498,592 - Valenciennes Trade
and Companies Register 444 571 772.
ACTIVITIES
LOCATIONS
Jeumont Electric Maintenance (Nantes, France); Jeumont Drives Systems (Etupes, France); Jeumont India (Mumbai);
Jeumont Middle East (Abu Dhabi).
SUPPLIERS
MANUFACTURERS
Design and construction of complete electrical systems (alternators, controls, and converters) for high-power onshore
and offshore wind turbines (1 to 6 MW).
J
270
PARTNERS
18 quai Malbert, 29200 Brest
+33 (0)4 86 82 03 60
+33 (0)1 73 72 95 85
www.jifmar.com [email protected]
ORGANIZATION
Vessels’s armament, design and achievement of complex maritime projects for the Department of Defence, MRE,
Oil&Gas and maritime transport of heavy package in France, North Sea, Baltic Sea and Africa.
ACTIVITIES
Inspection, maintenance and repair of surface and underwater systems (pipes, cables, buoys, etc.). Salvage and debris
recovery. UXO survey. Consulting and assistance to project owner maritime projects.
BUSINESSES SELECTED
Shipowner and Marine contractor
TRAINING CENTRES
JIFMAR OFFSHORE SERVICES SAS
MANUFACTURERS
LOCATIONS
271
SUPPLIERS
J
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Supervision of energy production installations
Espace Performance - 2B avenue Jean Rouxel, 44481 Carquefou cedex
+33 (0)2 28 232 555
+33 (0)2 51 13 14 90
www.keops-performance.com [email protected]
ORGANIZATION
Keops Automation specialises in monitoring rotating machinery, mainly for the power production sector. A designer
and provider of turnkey systems, Keops Automation offers innovative solutions to maintain equipment in working order
and to assist operation using appropriate dashboards.
ACTIVITIES
Keops Automation is leading the HYPERWIND project, which consists in developing a complete monitoring system for
onshore and offshore wind farms, and more generally for installations classed as marine renewable energy. Its mission
is to provide wind farm operators with a dynamic, systemic view of their installations and of their entire farms to ensure
efficient maintenance and optimise performance. Keops Automation also works alongside machine manufacturers
and maintenance providers to design control and command modules for machines.
LOCATIONS
Based in Carquefou near Nantes, Keops Performance operates throughout France and abroad.
SUPPLIERS
MANUFACTURERS
KEOPS AUTOMATION
K
272
PARTNERS
ORGANIZATION
KTR France is the French subsidiary of KTR Germany. The company has 50 years of experience in mechanical drives
and offers couplings for the output side of gearboxes in wind turbines. KTR has an annual turnover of €6 million in
France and over €100 million for the company as a whole.
ACTIVITIES
KTR has been designing and manufacturing wind turbine couplings since 1988 and has equipped more than 25,000
turbines, ranging from 250 kW to 6 MW worldwide.
RADEX-N couplings feature steel laminae and fibreglass spacers with brake discs to correct misalignment, provide
electric insulation, and reduce overloads through the inclusion of a RUFLEX torque limiter.
KTR France provides these couplings for new builds and as spare parts, as well as brake pads and callipers for aftersales service and maintenance.
LOCATIONS
Rhône-Alpes.
KTR has locations around the world, with more than 20 subsidiaries and numerous employees and distributors on
every continent.
273
MANUFACTURERS
46-48 chemin de la Bruyère, 69570 Dardilly
+33 (0)4 78 64 54 66
+33 (0)4 78 64 54 31
www.ktr.com [email protected]
Mechanical drives
SUPPLIERS
SUBSIDIARY OF KTR GERMANY-
TRAINING CENTRES
BUSINESSES SELECTED
KTR FRANCE
K
PARTNERS
BUSINESSES SELECTED
Cast iron - Machining - Painting
22 rue Joliot Curie, 08440 Vivier-au-Court
+33 (0)3 24 53 64 70
+33 (0)3 24 52 77 57
www.la-fonte-ardennaise.com [email protected]
ACTIVITIES
La Fonte Ardennaise is an expert in smelting, machining, and assembly processes.
LOCATIONS
Champagne-Ardenne.
SUPPLIERS
MANUFACTURERS
TRAINING CENTRES
LA FONTE ARDENNAISE
L
274
PARTNERS
BUSINESSES SELECTED
LEROY-SOMER
Generators and motors for backupp equipment
q p
Boulevard Marcellin Leroy - CS10015, 16915 Angoulême cedex 9
+33 (0)5 45 64 45 64
+33 (0)5 45 64 45 04
www.leroy-somer.com [email protected]
ACTIVITIES
Leroy-Somer products are made in ISO 14001-certified plants. It is an active participant in the production of electricity
from renewable sources, including:
• Solar: photovoltaic inverters and drivetrain systems for trackers
• Wind/water: generators and motors for backup
• Hydroelectricity: alternators and generators
• Biomass: alternators for cogeneration systems
LOCATIONS
MANUFACTURERS
Leroy-Somer is the world leader in industrial alternators and one of the top suppliers of electronic and electromechanic
drivetrain systems worldwide. A subsidiary of the Emerson Group, Leroy-Somer is a French company with 9,300
employees across 30 production units and 470 points-of-sale and service worldwide. In 2012, it achieved a turnover
of €1.342 billion. A veteran in energy savings and motorisation for low-emission vehicles, Leroy-Somer is continuing
to invest in environmental technologies in accordance with the principles of sustainable development.
TRAINING CENTRES
ORGANIZATION
275
SUPPLIERS
Poitou-Charentes.
L
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
LINAK FRANCE
SUBSIDIARY OF LINAK A/S GROUP (DENMARK)-
Manufacturer of low-voltage, electric linear actuators
13 rue de la Claie, 49072 Beaucouzé cedex
+33 (0)2 41 36 34 34
+33 (0)2 41 36 35 00
www.linak.fr [email protected]
ORGANIZATION
A French subsidiary of the Danish company LINAK, LINAK France is present in 35 countries and has 1,700 employees.
LINAK specialises in industrial automation, solar tracking, and MV circuit breaker switches, putting its expertise at the
service the wind power sector.
ACTIVITIES
LINAK offers an alternative to hydraulics through its line of energy-saving electric motors. The company has over
10 years of experience in wind power. Its powerful, compact, maintenance-free solutions with multiple integrated
sensors are used to improve the reliability of systems such as automatic bearing lubrication, pitch locking, rotor
locking, sluice gate activation, and opening/closing of hatches. LINAK actively participates in optimising weight and
noise and meeting size-efficiency goals.
LOCATIONS
SUPPLIERS
Based in Pays de la Loire, operations nationwide.
L
276
PARTNERS
BUSINESSES SELECTED
LOUIS DREYFUS ARMATEURS
The ppartner you
y can trust for your
y maritime challenges
g
28 quai Gallieni, 92158 Suresnes cedex
+33 (0)1 70 38 60 00
+33 (0)1 70 38 60 01
www.lda.fr
ACTIVITIES
The LOUIS DREYFUS ARMATEURS (LDA) group is one of the world’s leading players in the transport and the logistics of
dry bulk cargo, with a fleet of around 30 freighters and logistics resources. A well-known traditional and offshore port
operator, it is your ideal partner for innovative logistics around the world. It also specialises in industrial technological
partnerships (underwater cable-laying with Alcatel-Lucent, offshore seismic research with CGG, transport of heavy
specialised packages with Airbus, etc.) and other offshore services, including offshore towing of industrial installations
and rescue operations (Fairmount Marine). A pioneer in the “Motorways of the sea” concept, LDA is a major player
in vehicle and passenger transport in Europe in partnership with Danish company DFDS. Louis Dreyfus Travocean is
a wholly-owned subsidiary of the Louis Dreyfus Armateurs group specialising in underwater work, in particular the
installation, burying, and protection of underwater cables, in particular for MRE projects.
MANUFACTURERS
The Louis Dreyfus Armateurs group (LDA) is a French, family-owned group that provides maritime transport and
services. Its head office is in France. It is present worldwide and has 2,000 sea-going and shore-based employees.
The development of shipping under the French flag is central to the strategy of the LOUIS DREYFUS ARMATEURS group.
TRAINING CENTRES
ORGANIZATION
LOCATIONS
277
SUPPLIERS
Cherbourg: Cherbourg Terminal Vrac, a specialist in port logistics.
Marseille: Louis Dreyfus Travocean (head office) and Nicolas Frères (port handling).
Dunkerque: Louis Dreyfus Travocean (operational base).
Dieppe, Le Havre, Calais, St-Nazaire, Marseille: ferry terminals.
L
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
SUBSIDIARY OF LUFKIN INDUSTRIES (LUFKIN, TEXAS - USA)-
Gearbox manufacture and repair, servicing and maintenance
Avenue des Chavannes, 70220 Fougerolles
+33 (0)3 84 49 64 00
+33 (0)3 84 49 64 44
www.lufkin.com [email protected]
ORGANIZATION
Two sites in Fougerolles: an administrative site and a production site.
ACTIVITIES
Lufkin France specialises in the sale, design, manufacture, repair, and maintenance of gear drive systems, including
wind turbine gearboxes.
LOCATIONS
France: Franche-Comté.
USA: Texas.
SUPPLIERS
MANUFACTURERS
LUFKIN FRANCE
X
278
PARTNERS
Design and production of electrical cabinets
Parc d’activité Bellevues - 2 avenue du Gros Chêne - BP 90209, 95610 Éragny
+33 (0)1 34 30 17 20
+33 (0)1 34 64 99 09
www.madep.com [email protected]
ORGANIZATION
Our company is a skilled, experienced, and flexible long-standing player in the energy industry, bringing you products
tailored to your installations and electrical equipment. Lufkin France works as a partner to its clients, who come from
all areas of the manufacturing industry. We strive to establish long-term relationships, earning clients’ trust and offering
the best solutions to suit their specific needs or standards. Our production site in the Eure region is entirely dedicated
to making electrical distribution boxes and electronic power systems designed by our technical teams, using best
industry practices and in accordance with the current European standards.
TRAINING CENTRES
BUSINESSES SELECTED
MADEP
In 2005, we began designing and producing electrical cabinets for industrial applications, building and public works.
Three years ago, we developed a line of AC and DC junction boxes for photovoltaic installations, ranging from a 3 kW
kit to over 250 kW of power in AC cabinets. Based on your data we design wiring diagrams, which we submit to you
with a quote. We can deliver standard 3 kW kits from our stock. We are particularly stringent about quality control and
pay close attention to current norms and their changes in the areas of switchgear, lightening arresters, and wiring.
LOCATIONS
MANUFACTURERS
ACTIVITIES
279
SUPPLIERS
Île-de-France.
M
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
MANCHE MARINE INDUSTRIE
SUBSIDIARY OF FIPAM GROUP-
Shipbuilding and naval repairs, industrial boilermaking
19 rue Charles Blound, 76200 Dieppe
+33 (0)2 32 90 56 00
+33 (0)2 35 84 28 36
www.mim-dieppe.fr [email protected]
ORGANIZATION
• A société anonyme (Limited liability company) with 45 full-time employees and 15 fixed-term and temporary employees
• a turnover of €3.2 billion; a surface area of 25,000 m2, 10,000 m2 of which is indoors; 2 assembly halls measuring
60 m x 20 m and 75 m x 15 m
• 1 NC calculation and programming unit
• 1 NC oxy-acetylene cutting machine, 25 m x 7 m and 0 to 300 mm
• 1,200-tonne hydraulic press brake, 4 m for thin sheets
• 1,300-tonne and 1,400-tonne hydraulic arch press
• 1 pyramid roll with rolling width of 7,200 mm x 14 mm and diameter 710 mm, sheet pinched by moving lower
rolls, cone and cylinder rolling
• 2 40-tonne tower cranes
• 12 bridge cranes from 5 to 20 tonnes
• 1 vacuum spreader with vacuum pump, 3-tonne and 5-tonne
• 2 inclined planes for launching and removing from water
• 2 slipways (with width capacity of 33 m)
• and 1 railway connected to the SNCF rail network.
SUPPLIERS
ACTIVITIES
M
Subcontracted shipbuilding and repair for offshore wind farms. Metallic structures for manufacturers of wind turbines
and hydro-kinetic turbines.
LOCATIONS
Upper Normandy.
Dieppe, Le Havre, Rouen, and the Paris area.
280
PARTNERS
ORGANIZATION
MANOFFSHORE emerged in 2010 from the initiative of two leading companies of the french maritime sector, to build
up a strong provider of Port and Marine services, dedicated to the developpers of offshore wind parks in the Atlantic,
English Channel, North and Irish Seas.
HUMANN & TACONET stands as the leading independant port agency in France, with 12 fully manned offices all along
the french coast. Handling more than 3,500 ships call annually in french ports, Humann & Taconet boasts of a reputed
name amoung european and worldwide shipowners and shipping companies, but also major energy and commodity
trading houses, heavy industries, etc. The company is also involved in overseas freight forwarding activities, and offers
customs clearance,and storage services.
TERMINAUX DE NORMANDIE is the leading port terminal operator in France. Handling 2 million TEU’s, 250,000 vehicules
and 90,000 tons of general cargo and heavy lifts annually in Le Havre, the company is also involved in operations of
river terminals, and barge shipping operations on the rivers Seine and Rhône, though various partnerships.
ACTIVITIES
A one shop concept, Manoffshore offers in one single organisation a concentrate of expertise and experience in all
aspects of port operations, and project cargo logistics, including chartering of vessels, pontoons, tugs and barges,
management of port terminals dedicated to pre-assembly and handlings of heavy pieces, shipping agency, customs
formalities, wharehousing, etc.... The purpose of the company is to mutualize heavy handling equipments in one
single hub, in order to reduce the operating costs for the developpers of offshore wind parks and their subcontractors
alike, and be an interface between on and offshore operations, throughout the construction phases, and beyond that,
the maintenance period.
LOCATIONS
Le Havre.
281
MANUFACTURERS
73/75 quai de Southampton, 76600 Le Havre
+33 (0)2 35 19 39 89
+33 (0)2 35 19 39 78
www.manoffshore.fr [email protected]
Port & marine services to the wind offshore industry
SUPPLIERS
SUBSIDIARY OF TERMINAUX DE NORMANDIE ET HUMANN & TACONET-
TRAINING CENTRES
BUSINESSES SELECTED
MANOFFSHORE
M
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Manufacture of large parts and metal subassemblies
Route de Guerstling - BP 11, 57320 Bouzonville
+33 (0)3 87 39 78 78
+33 (0)3 87 39 78 92
www.manoir-industries.com [email protected]
ACTIVITIES
For many years, Manoir Industries has enjoyed a sound reputation for its technical expertise in the manufacture of highperformance moulded and forged parts and subassemblies. The company is expanding into aeronautics, armament,
the petrochemical industry, and nuclear and wind power.
Its Manoir Industries Specialties–Forges division offers steel-forged parts with high mechanical properties obtained
through:
• Stamping (up to 1000 kg – gears, shafts, pinions)
• Extrusion (solid and hollow shafts up to 2000 kg)
• Ring rolling (crowns up to 2.5 m in diameter)
• Open-die forging (shafts, discs, rollers, etc. up to 10,000 kg).
M.I.S. produces gears and shafts for wind turbine gearboxes, as well as safety parts intended mainly for the oil and
gas-related industries, building and public works machinery, and the railway and energy industries.
LOCATIONS
Lorraine.
SUPPLIERS
MANUFACTURERS
MANOIR INDUSTRIES
M
282
PARTNERS
Earthworks and foundations
3 bis rue de l’Industrie, 35730 Pleurtuit
+33 (0)2 99 88 41 54
+33 (0)2 99 88 48 47
[email protected]
ORGANIZATION
Marc SA was founded in Brest in 1876. Today, it is a leader in public works in Brittany. Located in Brest, Rennes, Lorient,
and Cherbourg, Marc SA draws on the expertise and experience of over 500 employees working in urban, rural, roadway,
railway, river, maritime, industrial, and environmental planning.
ACTIVITIES
LOCATIONS
Brittany.
283
SUPPLIERS
MANUFACTURERS
Fields of activity include:
• Networks for drinking water and sanitation
• Earthwork
• Civil and structural engineering
• Building
• Urban planning
• Marine construction
• Scaffolding design and construction
• Waste collection, sorting, transport, and recycling of waste
• Dredging
• Special works
• Telecommunication and video communication networks
• Construction of wind turbine foundations using reinforced and pre-stressed concrete
TRAINING CENTRES
BUSINESSES SELECTED
MARC S.A.
M
PARTNERS
BUSINESSES SELECTED
MASER ENGINEERING
SUBSIDIARY OF CRIT GROUP-
Maintenance of industrial pprocesses
92/98 bd Victor Hugo, 92110 Clichy
+33 (0)1 55 46 50 97
+33 (0)1 55 46 00 37
www.maser-engineering.com [email protected]
SUPPLIERS
MANUFACTURERS
TRAINING CENTRES
ORGANIZATION
M
General Management with transverse services: Technical, Commercial, HR, Accounting. 5 regional centers with:
Management, Business Officers, Administrative & Operational technicians. Or 400 employees, including 60 productive.
The Wind Turbine Division has 45 technicians on the National Territory.
ACTIVITIES
Maintenance of industrial processes is a key and strategic expertise to MASER ENGINEERING.
With experience of over 40 years in the profession of operational maintenance and maintenance engineering allows
MASER ENGINEERING to provide its customers with a global maintenance offer that meets the requirements of
availability of production means and / or exploitation and control maintenance costs.
MASER Engineering is specializes in preventive maintenance (maintenance service).
MASER Engineering teams, perform the periodic maintenance operations that are defined in the constructors
maintenances ranges.
Our maintenance offering, decline in different contractual forms according requirements. And MASER ENGINEERING
teams intervene in the context of time or annual contract with obligation of means or obligation of results.
MASER ENGINEERING has developed its maintenance sectors of renewable energies and especially in the wind thanks
to a team of experienced technicians, consisting of 38 persons involved in work such as:
• Maintenance engineering (development of maintenance plan) • Monitoring (preventive maintenance) • Repair
(corrective maintenance).
Our expertise • The maintenance engineering • Centralized management of “wind energy” activity • The expertise
of a general and independent maintainer • Monitoring / inspection (preventive maintenance • Repair of generators,
multipliers (corrective maintenance) • The contribution of our methods with service lines and optimization of existing
plans • Our risk analyzes.
Our methods • Rapid interventions through our regional offices throughout the country, as well as assembly workshops
and storage available to stakeholders • A team of 40 experienced technicians, qualified and mobile in good physical
condition and of all trades, automation, mechanics through the electromechanical • A policy HSE (Health Safety
Environment) respected by all our technicians • The protective equipment and special tools periodically checked.
LOCATIONS
Pays de la Loire, Nord-Pas de Calais, Rhône-Alpes, Midi-Pyrénées, Île-de-France. Région Centre Ouest (Allonnes - Saint
Nazaire) / Région Nord-Est (Douai-Vesoul) / Région Rhône-Alpes (Poisy) / Région Sud-Ouest (Colomiers) / Région
IDF (Roissy-Villaroche).
284
PARTNERS
Parc d’affaires Silic, 18 rue des Pyrénées - BP 30519 Wissous, 94623 Rungis cedex
+33 (0)1 56 70 27 60
+33 (0)1 56 70 27 61
www.mccf.fr [email protected]
ORGANIZATION
A subsidiary of Soletanche Bachy, the world leader in soil work, MCCF is a civil engineering and foundations company
specialising in operations related to the energy industry. Backed by its group’s resources and expertise, MCCF is involved
in projects from design to delivery, both in France and abroad.
ACTIVITIES
Over the past 10 years, MCCF has built approximately 250 wind turbine foundations on nearly 45 wind farms across
France.
LOCATIONS
285
SUPPLIERS
Île-de-France.
BUSINESSES SELECTED
Construction of special foundations
TRAINING CENTRES
SUBSIDIARY OF SOLETANCHE-BACHY GROUP-
MANUFACTURERS
MCCF
M
X
SUPPLIERS
286
MANUFACTURERS
© WeserWind - Matthias Iberler
TRAINING CENTRES
BUSINESSES SELECTED
PARTNERS
PARTNERS
BUSINESSES SELECTED
MEDIACO LEVAGE
Hiringg of telescopic
p and crawler cranes
17 avenue André Roussin, 13016 Marseille
+33 (0)4 91 03 81 91
+33 (0)4 91 09 32 82
www.mediaco.fr [email protected]
287
SUPPLIERS
MANUFACTURERS
70 offices in France, including:
Marseille • La Ciotat • Toulon • Cannes • Nice • Fos • Avignon • Manosque • Montpellier • Béziers • Narbonne
• Perpignan • Carcassonne • Toulouse • Pau • Bayonne • Agen • Bordeaux • La Rochelle • Angoulême • Nantes
• Saint-Nazaire / Brest • Rennes • Angers • Poitiers• Caen • Le Havre • Rouen • Mantes • Paris Sud • Paris Nord
• Reims • Valenciennes • Lille • Metz • Nancy • Saint-Avold • Strasbourg • Colmar • Chalampe • Mulhouse • Belfort
• Besançon • Dijon • Bourges • Mâcon • Lyon • Saint-Etienne • Clermont•Ferrand • Valence • Grenoble • Orange.
Offices in North Africa, including:
Libya • Tunisia • Algeria • Mauritania • Senegal • Niger • Nigeria • Cameroon.
TRAINING CENTRES
LOCATIONS
M
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
MENARD
SUBSIDIARY OF SOLETANCHE FREYSSINET GROUP-
Ground improvement
2 rue Gutenberg, 91260 Nozay
+33 (0)1 69 01 37 38
+33 (0)1 69 01 75 05
www.menard-web.com [email protected]
ORGANIZATION
694 employees around the world. Turnover of €178 million.
Subsidiaries: United Kingdom, Germany, Poland, Spain, USA, Canada, Middle East, Indonesia, Malaysia, Vietnam, Australia.
ACTIVITIES
Menard offers soil improvement solutions adapted to the soil encountered and to the load.
Menard uses 12 techniques:
Dynamic compaction, dynamic replacement, stone columns, bimodulus columns, controlled modulus columns (CMCs),
vibro compaction, atmospheric (or Menard vacuum) consolidation, vertical drains, jet grouting, soil-bentonite walls,
soil mixing, and compaction grouting.
Some of these techniques require additional materials, while others do not.
Jet grouting can be used to reinforce soil and for underpinning.
LOCATIONS
SUPPLIERS
North, East, Île-de-France, Rhône-Alpes, South, Southwest.
M
288
BUSINESSES SELECTED
PARTNERS
:LQG)DUP)UÅOLJQÅ
:LQG)DUP%RQQHXLO/HV(DX[
0(1$5'
UXH*XWHQEHUJ%312=$<)5$1&(
7ÅO)D[
FRXUULHU#PHQDUGPDLOFRP
ZZZPHQDUGZHEFRP
:LQGIDUP)DQWDQHOH5RPDQLD
289
SUPPLIERS
:LQG)DUP6DLQW3LHUUHGH%ÅQRXYLOOH
MANUFACTURERS
TRAINING CENTRES
*5281',03529(0(1763(&,$/,67
'\QDPLF&RPSDFWLRQ'\QDPLF5HSODFHPHQW5DSLG,PSDFW&RPSDFWLRQ
6WRQH&ROXPQV%L0RGXOXV&ROXPQV&RQWUROOHG0RGXOXV&ROXPQV
9LEUR&RPSDFWLRQ0HQDUG9DFXXP9HUWLFDO'UDLQV
-HW*URXWLQJ'LDSKUDJP:DOO6RLO0L[LQJ&RPSDFWLRQ*URXWLQJ
X
X
SUPPLIERS
290
MANUFACTURERS
© Eiffage Construction Métallique
TRAINING CENTRES
BUSINESSES SELECTED
PARTNERS
PARTNERS
BUSINESSES SELECTED
MERCERON TP
Earthworks
172 rue Carnot - BP 579, 85305 Challans cedex
+33 (0)2 51 93 05 87
+33 (0)2 51 35 01 39
www.groupe-merceron.com [email protected]
Merceron TP is a civil works company operating in three main areas of activity: earthwork, roadway construction, and
marine construction.
LOCATIONS
291
SUPPLIERS
MANUFACTURERS
Pays de la Loire.
TRAINING CENTRES
ACTIVITIES
M
PARTNERS
BUSINESSES SELECTED
MERSEN
Global expert in electrical specialties and graphite-based materials
2-3 Place des Vosges, 92400 Paris La Défense
+33 (0)1 46 91 54 00
+33 (0)1 46 91 54 01 www.mersen.com [email protected]
SUPPLIERS
MANUFACTURERS
TRAINING CENTRES
ORGANIZATION
M
Our 7,000 employees put their skills and passion to serve customers across the globe, in more than 30 countries.
ACTIVITIES
• Manufacturing of carbon brushes, brush-holders, slip rings and signal transfer systems improving the performance
of wind turbines.
• Manufacturing of overvoltage protection devices, fuse and fusegear, low voltage and high power switches, complete
cooling systems for the electrical protection of wind turbines.
Mersen specifically invests in renewable energies. Our multiple solutions for the wind industry (encompassing signal
transfer systems, carbon brushes and brush-holders, slip ring assemblies, overvoltage protection devices, fuse and
fusegear, low voltage and high power switches, cooling of power electronics) have enabled us to become a leading
supplier to the Wind Industry, in both the original equipment and replacement markets.
LOCATIONS
Over 50 subsidiaries in France and in the world.
Mersen’s addresses in France:
• MERSEN France Amiens 10 avenue Roger Dumoulin, 80084 Amiens cedex 2
Tel. : + 33 (0)3 22 54 45 00 - Fax : + 33 (0)3 22 54 46 08
web site : www.mersen.com/produits/solutions-electriques-pour-moteurs-et-generateurs.html
Email : [email protected]
• MERSEN France Gennevilliers 41 rue Jean Jaurès, 92231 Gennevilliers
Tel. : +33 (0)1 41 85 43 00 - Fax : +33 (0)1 41 85 43 15
web site : www.mersen.com/produits/solutions-et-materiaux-avances-pour-hautes-temperatures.html
• MERSEN France St-Bonnet-de-Mure 15 rue Jacques Vaucanson, 69720 St-Bonnet-de-Mure
Tel. : +33 (0) 4 72 22 66 11 - Fax : +33 (0) 4 72 22 67 13
web site : www.mersen.com/produits/surete-et-fiabilite-pour-lenergie-electrique.html
292
PARTNERS
TRAINING CENTRES
ELECTRICAL SOLUTIONS
TO IMPROVE
PERFORMANCE
AND RELIABILITY
BUSINESSES SELECTED
ENERGY
0HUVHQSURYLGHVZLQGWXUELQHDQGJHQHUDWRU2(0VZLQGIDUPRSHUDWRUVDQGPDLQWHQDQFH
VSHFLDOLVWVZLWKLQQRYDWLYHVROXWLRQVWDLORUHGWRDOORSHUDWLQJFRQGLWLRQVGHVLJQHGDQGWHVWHG
IRURSWLPXPSHUIRUPDQFH
z&DUERQEUXVKHVz%UXVKKROGHUVz6OLSULQJDVVHPEOLHVz6LJQDOWUDQVIHUV\VWHPV
z)XVHDQGIXVHJHDUz6XUJHSURWHFWLYHGHYLFHVz&RROLQJRISRZHUHOHFWURQLFV
z%XVEDUVz:LQGWUDFNHU70VHUYLFHV8SWRZHUGLDJQRVWLFVDQGWHFKQLFDOVXSSRUW
0HUVHQLVDJOREDO([SHUWLQPDWHULDOVDQGVROXWLRQVIRUH[WUHPHHQYLURQPHQWVDVZHOODV
LQWKHVDIHW\DQGUHOLDELOLW\RIHOHFWULFDOHTXLSPHQW
ZZZPHUVHQFRP
293
7OV[VZ!1\WP[LYPTHNLZ.L[[`PTHNLZ4LYZLU0THNL3PIYHY`
MANUFACTURERS
&$5%21(/255$,1(,612:0(56(1
SUPPLIERS
DF
:LQGWU
0 U7 VHUY
L
V
FH
NH
X
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
METAL DEPLOYE RESISTOR
Designs and manufactures power resistors for grounding, capacitor banks, filtering,
rail traction applications, motor control, heating and various electrical products
1 route de Semur, 21500 Montbard
+33 (0)3 58 55 58 42
www.mdresistor.com
ORGANIZATION
Today, Metal Déployé Resistor has a team of 75 employees, including 25 engineers and technicians, ready to listen to
your needs in the following fields: research and development, design, manufacture, testing, shipping, and after-sales
service for electrical power resistors.
With over half of its turnover coming from outside France, Metal Déployé Resistor is the European leader in load bank
construction, filtering, and grounding.
SUPPLIERS
MANUFACTURERS
ACTIVITIES
M
• Load banks (for testing): For testing wind turbine electrical installations under load (under real-life conditions) before
connecting them to the power grid. Testing can be performed at total or partial power, with rapid load increase and
loss (impacts, loading, load-shedding), with or without varying the power factor of the load.
• Neutral grounding resistors (for protection): To connect a transformer’s neutral point to the earth and limit the shortcircuit current in the event of a phase-to-earth fault.
• Harmonic filter resistors: To eliminate harmonics generated by electronic power converters and provide a clean
signal to the power grid. Associated with inductance coils and/or capacitance to form a filter.
• Motor control resistors: To gradually start or stop an electric motor (winch, turret, hoists, etc.). Often combined with
a frequency variator.
LOCATIONS
Burgundy.
294
PARTNERS
14 boulevard Winston Churchill, 44100 Nantes
+33 (0)2 40 71 05 05
+33 (0)2 40 71 05 06
meteodyn.com [email protected]
ORGANIZATION
SAS (French simplified limited liability company) with capital of € 87,800.
ACTIVITIES
Meteodyn develops high-technology CFD wind modelling software and brings consulting services for wind park
developers, turbine manufacturers and all actors of the wind farm industry.
• meteodyn WT software: wind resource assessment, site suitability and energy optimization.
• meteodyn Forecast: short and very short term wind production forecast system.
• UrbaWind: wind resource assessment, site suitability specific to urban areas, small wind and community projects.
• Consultancy: wind potential studies, technical and economic feasibility reports, operation and maintenance efficiency...
Meteodyn is supporting the wind energy industry at every steps, siting, design, management of wind farms.
LOCATIONS
295
SUPPLIERS
Headquarters based in Nantes - France
Subsidiaries in Beijing (China), Pune (India) and Philadelphia (USA).
MANUFACTURERS
CFD wind modeling software
TRAINING CENTRES
BUSINESSES SELECTED
METEODYN
M
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MICEL
SUBSIDIARY OF ADDEV-
Processing and distribution of insulation products and technical films for
industrial use
3 allée Léonard de Vinci - Parc d’activités Stelytec, 42400 Saint-Chamond
+33 (0)4 77 29 39 49
+33 (0)4 77 28 39 48
www.micel.fr [email protected]
ORGANIZATION
Micel is the specialist in custom solutions for electrical insulation (flexible and rigid insulation, resins and varnishes,
technical adhesives, sheaths, cables, and accessories) for motors, transformers, cables, and electrical switchgear.
Micel is a subsidiary of ADDEV specialised in high-performance technical equipment and organised around four main
activities: electrical insulation, technical films, glues and adhesives, and composites and plastics.
MANUFACTURERS
ACTIVITIES
Micel helps industrial electrical engineering clients choose flexible electrical insulation materials that meet their
needs. These materials include Nomex®, polyester Mylar®, Kapton®, Tedlar®, Teflon®, alu-pet, and laminate. Micel
delivers custom, finished products (reels, flat rolls, technical parts, kits, etc.) through its service offer, including slitting,
decoiling, die-cutting, transverse winding, lamination, hot forming, and ultrasonic welding.
For the wind power industry, Micel specialises in electrical insulation for generators and transformers.
SUPPLIERS
LOCATIONS
M
France (Saint-Chamond and Valence).
Poland.
Sales offices: Germany, United States, Czech Republic.
296
PARTNERS
Movement control components and systems
38 rue du Morvan - Parc d’affaires Silic - BP 40417, 94573 Rungis cedex
+33 (0)1 45 60 70 00
+33 (0)1 45 60 70 01
www.moog.com [email protected]
ORGANIZATION
Moog is an American company with 9,000 employees and 28 subsidiaries worldwide. It is a manufacturer of highperformance movement control components and systems for industry, aviation, space, and medicine.
ACTIVITIES
MANUFACTURERS
Moog manufactures the following products:
• Electrical actuators for wind turbine blade positioning
• Hydraulic actuators for wind turbine blade positioning
• Blade load measurement systems
• Environment monitoring systems (ice, lightning, breakage)
• Rotor stress analysis software
• Electrical slip rings
• Fibre optic rotating joints
• Hydraulic rotating joints
• Solar panel direction actuators
TRAINING CENTRES
BUSINESSES SELECTED
MOOG
LOCATIONS
297
SUPPLIERS
Île-de-France, Rungis: Industry.
Midi-Pyrénées, Toulouse: Aeronautics.
M
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SUPPLIERS
M
MOTEURS J.M.
Designer, Manufacturer and Distributor of Electric Motors for
demanding environments based on customer specifications
ZI BP 23, 61700 Domfront
+33 (0)2 33 30 73 30
+33 (0)2 33 30 14 85
www.moteurs-jm.com [email protected]
ORGANIZATION
MOTEURS J.M. is a producer of choice in Europe of protected electric motors designed for severe environments
(temperature, humidity, subsea, salinity, aggressive gas, vacuum, pressure, dust, irradiation, vibration…) in the small
to medium range of power (from 10 to 500 KW), based on client’ specification requirements.
MOTEURS J.M. designs and manufactures water cooled and air cooled electric motors according to CODAP/DESP, ATEX
certifications for clients located all over the world and clients operating in various industries.
We are dedicated to bring Quality (reliability-resistance-durability), Adaptability to clients specification (assistance,
guidance in motors conception and definition), Reactivity in design (ability to propose and innovate) and Capability
in maintaining and refitting motors to our clients.
ACTIVITIES
MOTEURS J.M. produces motors for prominent energy and marine players, such as EDF, AREVA, DCNS… .
The company can provide ventilation solution for cooling the generator, spinning of the nacelle (yaw control motors),
blade pitch control motors, hydraulic pump motors, mast elevator motors and for all other auxiliary equipments in
marine environment.
MOTEURS J.M. motors offers a high cooling effiency, compacity and electric performance.
LOCATIONS
MOTEURS J.M. sales all over the world.
Its manufacturing plant is located in Normandy, France. It consists in a design department, CNC machines, winding,
testing equipments...under a 5,000 square meter manufacturing plant.
298
PARTNERS
General mechanical engineering
409 rue des Frères Lumière, 71000 Macon
+33 (0)3 85 20 56 56
www.msbgroup.fr [email protected]
ORGANIZATION
With 150 employees and 200 machines, the MSB Group has a strong presence in Burgundy through its four facilities
in Saône-et-Loire, providing full industrial solutions for design, manufacture (mechanical welding, machining, sheet
metal welding, pipe systems), assembly, installations and maintenance.
ACTIVITIES
MANUFACTURERS
Areas of expertise: general mechanics and mounting, NC machining, sheet metal manufacture, mechanical welding,
metal work, industrial boilers and pipe systems, electrical engineering and automated systems, industrial refrigeration,
custom-built machinery...
TRAINING CENTRES
BUSINESSES SELECTED
MSB
LOCATIONS
299
SUPPLIERS
Burgundy.
M
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
NASS&WIND INDUSTRIE
Design and engineering of bottom-fixed and floating offshore wind farms
1 rue Henri-Honoré d’Estienne d’Orves, 56100 Lorient
+33 (0)2 97 37 56 06
+33 (0)2 97 37 56 54
www.nass-et-wind.com winfl[email protected]
ORGANIZATION
Nass&Wind Industrie is a subsidiary of the independent French group Nass&Wind, the specialist in the development
of projects and technologies in renewable energy. This subsidiary, located in Lorient (Morbihan), has a team of around
fifteen high-level engineers dedicated to engineering activities and assistance to project owners for offshore wind
farms. In particular, Nass&Wind Industrie leads the Winflo project for the development of a high power floating wind
turbine technology in partnership with large industrial players and French academics, including DCNS and Ifremer.
This project was certified by the Mer Bretagne competitiveness cluster in 2008.
SUPPLIERS
MANUFACTURERS
ACTIVITIES
N
Nass&Wind Industrie is leading the Winflo project, a project the aim of which is to develop innovative technology for
high-power (over 4 MW) floating offshore wind turbines effective at a depth of more than 50 m. This technology is
based on a semi-submersible (free-floating) platform that optimises nacelle motion. It will include an anchor system
that is suitable for all types of seabed and has a minimal impact on the environment. The nacelle will be optimised in
conjunction with the float for the best possible energy production.The system will require limited installation resources,
and maintenance design will be innovative and suited to distances far offshore.The initial pre-series will be manufactured
and installed beginning in 2015. A number of large pilot farms will be built between 2015 and 2020, with the creation
of a French wind power industrial sector which will generate many jobs into the bargain. Nass&Wind Industrie also
conducts engineering studies for bottom-fixed and floating offshore wind farm locations, using its expertise to provide
clients with project management support for project owners.
LOCATIONS
Brittany.
300
PARTNERS
1 rue Goethe, 67000 Strasbourg
+33 (0)3 88 14 16 00
+33 (0)3 69 20 80 44
www.naturalpower.com [email protected]
ORGANIZATION
Natural Power is an engineering office specialised in second opinions, wind studies, and the planning, construction
and operation of wind farms. Since it opened in 1995, Natural Power has built itself a sound professional experience
and an enviable reputation in the wind industry. From its British and international offices, Natural Power has earned
over 20 GW of references for a wide range of customers by supplying high-quality technical solutions and an approach
based on practical advice. Located in the heart of Europe, in our Strasbourg-based office (formerly Ventec), our team
of engineers specialising in second opinions, wind studies and assessments and construction, works both in France
and abroad. Our office in Nantes means we can be close to the French offshore sites and direct our assistance to
project owner assignments.
ACTIVITIES
As renewable energy consultants, Natural Power specialises in second opinions for banks and investors, site studies
and development for its clients, from the feasibility studies through project development, construction, machine
inspection and operations management to dismantling. It also provides a weather forecasting service that, when
combined with its technical skills, helps clients optimise wind farm maintenance and on-site work. The company’s
success is ensured by the cutting-edge technology it uses, such as the CFD software VENTOS® and Melogale&trade
(its system for analysing wind farms in service). The tools it uses to model complex land and forests are recognised
in the industry and can significantly reduce uncertainties with regard to wind resources.
Alsace.
301
SUPPLIERS
LOCATIONS
MANUFACTURERS
Studies, expert assessment
TRAINING CENTRES
BUSINESSES SELECTED
NATURAL POWER
N
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
NAVALU
Aluminium ship building
Port du Bec, 85230 Bouin
+33(0)2 51 49 06 49
+33(0)2 51 49 20 73
www.navalu.fr [email protected]
ORGANIZATION
For 30 years,The NAVALU company builds ships of aluminum work for the jobs by the sea. Since 2002, NAVALU dashed
launched into the ships of servitude and since 2008 on the market of wind offshore, catamarans and monohulls for
the transfer and the survey. NAVALU is the first French shipyard to build wind ships offshore.
ACTIVITIES
After the signature of first two contracts of catamarans of 24m for the installation and the maintenance of wind turbines
at sea for England, NAVALU continues the production of the more and more sophisticated and innovative ships to ally
efficiency in comfort at sea. The construction site is equipped with buildings to build going ships 35m. The port has
2 holds of launch, one for the boats at least of 12m and the other one for the superior boats in 12m of length. With
a naval architect, of the qualified personnel for the assembly and the soldering of hulls, constructed NAVALU of the
bâteaux of quality, following the standards of the regulations and can benefit from a certification of an international
classification company. Thanks to its fame and its know-how, NAVALU pursues its progress on the international wind
market and turned a considerable corner in term of innovation, reactivity, quality and control of the costs.
LOCATIONS
SUPPLIERS
The NAVALU company is implanted in a port on the coast of the Atlantic Ocean, in Vendée, in 30 min of Nantes arranging
all the big accesses (airport, stations, highways) necessary for its progress in France and on the international stage.
N
302
PARTNERS
Project management, multiple specialities, shipbuilding, industrial, MRE, Oil&Gas
52 boulevard Marfille - CS 12938, 29229 Brest cedex 2
+33 (0)2 98 43 15 39
+33 (0)2 98 43 20 14
www.navtis.fr [email protected]
ORGANIZATION
ISO 9001-certified. Multidisciplinary project supervision. Industrial studies, manufacture, assembly, and maintenance
for industrial sectors and civil and military naval sectors.
ACTIVITIES
Expertise in project supervision and execution in the fields of mechanics, structures and fluids, fairings, electricity,
instrumentation, and vibration control. NAVTIS works with leading manufacturing and shipbuilding companies in
France and abroad.
MANUFACTURERS
LOCATIONS
TRAINING CENTRES
BUSINESSES SELECTED
NAVTIS
303
SUPPLIERS
N
PARTNERS
BUSINESSES SELECTED
NENUPHAR
Design and manufacture of vertical-axis wind turbines for floating offshore
applications
ABM Center, 128 rue du Faubourg-de-Douai, 59000 Lille
www.nenuphar-wind.com [email protected]
TRAINING CENTRES
ORGANIZATION
Nénuphar is a limited liability company.
ACTIVITIES
Nénuphar designs vertical-axis wind turbines. It assembles its wind turbines and manufactures the blades for its machines.
LOCATIONS
SUPPLIERS
MANUFACTURERS
Nord-Pas de Calais.
N
304
PARTNERS
58 boulevard Pierre Lefaucheux, ZI Sud, 72025 Le Mans
+33 (0)2 43 60 38 10
+33 (0)2 43 60 38 11
www.net-wind.com [email protected]
ORGANIZATION
Net-Wind SAS was founded in April 2011. It expanded soon thereafter when it purchased a well-established wind
turbine maintenance company.
ACTIVITIES
Net-Wind’s technical and industrial expertise allow it to offer global maintenance services (available as annual and
multi-year contracts) and a range of services defined from a wide range of skills, including:
• Corrective, preventive, and predictive maintenance of wind farms (including high-voltage maintenance)
• Technical operations and regular reporting
• Remote surveillance and monitoring
• Performance controls and improvement
• End-of-warranty inspections and technical audits
• Structural inspections and repair (turbine blades, bases, and masts)
• Inspection and monitoring of electrical and mechanical components (gearboxes, generators, etc.)
• Replacement of main parts and large-scale machining on-site
• HSE management of the site (prevention plans, regulatory inspections, etc.)
• Management of wind farm maintenance (waste, roadways, green spaces, etc.).
Pays de la Loire.
Net-Wind is present throughout France via regional locations and partners.
305
SUPPLIERS
LOCATIONS
MANUFACTURERS
Wind turbine maintenance and technical assessment
TRAINING CENTRES
BUSINESSES SELECTED
NET WIND
N
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Manufacture of cables and wiring systems
4-10 rue Mozart, le Christophe 2, 92587 Clichy cedex
+33 (0)1 56 69 84 00
+33 (0)1 55 62 78 00
www.nexans.fr [email protected]
ORGANIZATION
Nexans is a specialist in wiring systems.
ACTIVITIES
Nexans provides custom wiring solutions for wind turbines around the world. The company recently launched its
WINDLINK® line, a set of complete wiring solutions specifically designed for wind turbines of all sizes. Products
include energy cables, control cables, special cables, and accessories. This new line includes cables and components
made of copper, aluminium, and fibre optics. Products have been fully tested under actual operating conditions
and mechanical constraints to ensure systems compatibility and longevity, helping turbine manufacturers produce
electricity as efficiently as possible.
LOCATIONS
Nexans’ head office is located in the Pays de la Loire region of France.
SUPPLIERS
MANUFACTURERS
NEXANS
N
306
PARTNERS
BUSINESSES SELECTED
NHEOLIS
Designer and manufacturer of 3D wind turbines for domestic and professional
applications
Europôle Méditerranéen de l’Arbois - Avenue Louis Philibert
Immeuble Gérard Mégie, 13857 Aix-en-Provence cedex 3
Founded in early 2006, Nheolis is headquartered in Marseilles, with offices in Aix-en-Provence and London. Nheowind
products are available in France and worldwide through a network of certified partners.
ACTIVITIES
Nheolis designs and manufactures wind turbines with a new technological dimension. The company specialises in
small wind turbines for the most competitive electricity production possible. In 2009, Nheolis revolutionised the wind
power industry with the design of its 3-dimensional blades, which were used as a world-first in the Nheowind 3D
100 CP. Nheolis improved on the design of the Nheowind still further with curved “Chistera” 3D blades, introduced in
2010 on the Nheowind 3D 50 and 3D 100. Nheolis wind turbines can be installed in both urban and rural areas and
can be adapted to clients’ needs, helping to quickly satisfy growing global demand.
Nheolis’ technology creates an original design that has achieved performance, robustness, and quietness levels never
before seen in small wind turbines. In 2010, Nheolis won the EEP Gold Award for its work.
MANUFACTURERS
ORGANIZATION
TRAINING CENTRES
+33 (0)4 42 25 98 40
+33 (0)4 42 20 51 19
www.nheolis.com [email protected]
LOCATIONS
307
SUPPLIERS
Marseille, Aix, and more than 30 certified partners throughout France.
N
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Manufacture of logistics vehicles, including for nacelle and mast transport
RN 6 - BP 3, 89290 Champs-sur-Yonne
+33 (0)6 86 40 33 88
www.nicolas.fr [email protected] [email protected]
ORGANIZATION
SARL with 67 employees.
ACTIVITIES
Transporting wind turbine parts such as masts, nacelles and blades often requires special accessories and modular
vehicles.
NICOLAS has therefore developed a line of accessories fully compatible with the various families of modular vehicles,
so you can transport your goods safely. Convoy manoeuvrability is improved and logistics tasks are simplified.
LOCATIONS
Burgundy.
SUPPLIERS
MANUFACTURERS
NICOLAS
N
308
PARTNERS
ORGANIZATION
100 employees.
ACTIVITIES
LOCATIONS
Nord-Pas de Calais.
309
SUPPLIERS
Nidaplast has an international reputation for the design of its extruded polypropylene honeycomb panels. Nidaplast
offers light-weight, resistant solutions for daily applications in the fields of transport, sailing, industrial goods, capital
equipment, and buildings. It also provides a range of products suitable for nacelle use in wind turbines, including
honeycomb panels for lamination, infusion, or RTM, depending on the parts of the nacelle. Nidaplast also offers
technical services, such as laboratory testing and development engineers to assist client projects. It also features a
Nida-Kits concept with pre-cut, ready-to-use parts (not available for infusion). The Nidaplast® 8RI is both light-weight
and resistant, both essential properties for wind turbines. When core thickness is important, Nidaplast ® 8RI takes
precedence over other materials. Both more economical and environmentally-friendly than monolithic structures,
Nidaplast®8 honeycomb structural cores use less fibreglass and resin. The recyclability of polypropylene, its excellent
mechanical properties, and its high-performance acoustical characteristics make Nidaplast® 8RI the ideal core for use
in wind turbine nacelles. Thanks to the geometry of the alveoli, polypropylene honeycombs are perfect for vibration
reduction and acoustic absorption and insulation. Honeycomb structural panels maintain all these advantages in the
long term when used in wind turbine nacelles.
BUSINESSES SELECTED
Rue Paul Vaillant Couturier, 59224 Thiant
+33 (0)3 27 44 72 00
+33 (0)3 27 44 88 05
www.nidaplast.com [email protected]
TRAINING CENTRES
Manufacturer of extruded polypropylene honeycomb cores for sandwich panels
Manufacturer of finished sandwich panels with polypropylene and aluminium cores
MANUFACTURERS
NIDAPLAST COMPOSITES
N
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
NOMA COMPOSITES SAS
SUBSIDIARY OF BFG EUROPE-
Composites manufacturing - Producer of nacelles
« La Gare », 61400 Mauves-sur-Huisne
+33 (0)2 33 85 16 16
+33 (0)2 33 83 59 55
www.bfginternational.com [email protected]
ORGANIZATION
Noma Composites is a subsidiary of BFG Europe which is a subsidiary of BFG International. BFG International is located
in Bahrein and own several plants all over the world. BFG which is a recognized market leader in the design and
manufacture of a wide and diversified range of composite products for all sectors. BFG International have a technical
center (CAD and design of parts) and a dedicted factory to manufacture the tools.
MANUFACTURERS
ACTIVITIES
Noma Composites specializes in the design and production of fiber reinforced polyester (FRP) and other composite
moldings to a designer’s specifications virtually without restraint with regard to finish, color and shape. BFG International
and Noma Composites produce Nacelle for Wind Turbines.
(http://www.bfginternational.com/bank/banking.asp)
LOCATIONS
SUPPLIERS
Bahrein, Philippines, China, India, USA, Brazil, Spain, France (2 plants - Noma Composites in Normandy & ATMC in
La Rochelle).
N
310
PARTNERS
Design and sale of vertical-axis wind turbines
53 rue du Vercors, 86240 Fontaine-le-Comte
+33 (0)5 35 54 02 04
+33 (0)5 35 54 02 13
www.noveol.com [email protected]
ORGANIZATION
10 employees.
ACTIVITIES
MANUFACTURERS
Noveol is the designer and seller of the nov’éolienne, a quiet, vertical-axis wind turbine whose unique shape allows
it to operate in all types of wind.
Nov’éolienne is an attractively-designed vertical-axis wind turbine in which art meets technology. Its small size makes
it particularly suitable for domestic use, even in urban areas. It is particularly intended for local authorities, individuals,
and in isolated areas.
TRAINING CENTRES
BUSINESSES SELECTED
NOVEOL
LOCATIONS
311
SUPPLIERS
Poitou-Charentes.
N
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SUPPLIERS
N
NTN-SNR ROULEMENTS
Design and manufacture of ball bearings
1 rue des Usines, 74010 Annecy
+33 (0)4 50 65 30 00
+33 (0)4 50 65 33 84
www.ntn-snr.com [email protected]
ORGANIZATION
NTN-SNR ROULEMENTS is a subsidiary of NTN Corporation, the world’s third leading producer of ball bearings. NTNSNR ROULEMENTS designs and manufactures very high-quality technical products. Innovation plays a key role in our
developments: smaller, lighter, more reliable, better-performing, and more environmentally-friendly ball bearings. We
are constantly innovating both with and for our clients.
ACTIVITIES
NTN-SNR’s brands are widely known and trusted. The company is very active in the automotive, industrial and
aeronautics sectors:
• Automotive: No.1 on the European vehicle market.
• Industry: A partner to leading high-tech companies working in wind power, solar power, railway, agriculture,
transmissions, etc. thanks to its dedicated teams and wide range of bearings. In the wind power sector, NTN-SNR works
closely with wind farm designers and operators to develop and manufacture bearings for rotors, gearboxes, generators,
and slewing rings. NTN-SNR also offers services to help clients optimise their bearing use. These services include
lubrication, monitoring, training, assistance with assembly and disassembly assistance, expert assessment, tools, etc.
• Aeronautics: A leader in helicopter transmissions, NTN-SNR was also a partner in the first flight of the Airbus A380.
It is a supplier to major aeronautic and space programmes (including the European launcher Ariane and the CFM56
jet engines).
LOCATIONS
Rhône-Alpes.
312
PARTNERS
SUBSIDIARY OF CITEL-
Obstruction lights
2 rue Troyon, 92316 Sèvres
+33 (0)1 41 23 50 10
+33 (0)1 41 23 50 11
www.obsta.fr [email protected]
ORGANIZATION
OBSTA is specialized in long life obstruction lights dedicated to obstacle to air navigation like broadcasting towers,
high rise buildings, stacks, transmission lines, gsm towers etc. Our products are compliant and certified by STAC in
France in accordance with ICAO annex 14 chapter 6 and for some of them compliant and certified by Intertek in US in
compliance with FAA regulations. OBSTA is part of CITEL group specilized in manufacturing surge protection devices.
TRAINING CENTRES
BUSINESSES SELECTED
OBSTA
Since beginning of 2000, OBSTA has developed and installed mainly in France complete medium intensity dual color
first xenon and now led obstruction lighting systems dedicated to windturbines. Thanks to our long experience, we
propose a complete range of obstruction lighting systems with very modular design for easy and low maintenance cost.
LOCATIONS
313
SUPPLIERS
Our commercial office is based in Sèvres close to Paris and our factory is in the city of REIMS. OBSTA also has two
subsidiaries through CITEL in Bochum (Germany) and Miami (USA).
MANUFACTURERS
ACTIVITIES
O
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SUPPLIERS
O
OILGEAR TOWLER
Design of complete electro-hydraulic systems for wind power and tidal projects
5 allée des Frères Montgolfier, 77183 Croissy Beaubourg - ZI Pariest
+33 (0)1 64 62 72 00
+33 (0)1 64 80 79 10
www.oilgear.fr [email protected]
ORGANIZATION
750 employees on 5 continents, including 170 employees in Europe (Britain, Germany, Spain, Italy, and France).
30 employees in France, with 10 in engineering (5 hydraulic specialists and 5 electronics engineers), 3 sales engineers,
and 5 after-sales service specialists (for commissioning, troubleshooting, and repair).
2012 turnover in France of €6.8 million
ACTIVITIES
Builder of hydraulic/electric parts and turnkey systems.
Oilgear Towler provides hydraulic power and functions, automation, and command and control systems for equipment
from design to commissioning and maintenance.
For more than 90 years, Oilgear Towler has working in the areas of energy (including wind and hydro-kinetic power),
industry (forging, extrusion, steel), aeronautics, structural engineering, test benches, and oil applications.
• Hydraulic/electric systems:
Global supply of equipment, including:
- Hydro-electric power stations, hydraulic manifolds with function and regulation valves, pipework, actuators
- Power and command and control cabinets, human-machine interface, wiring
- Supervision and development of PLC programs
• Products:
A line of piston pumps delivering 10 to 1,000 kW, transfer barrier pumps, standard cartridge valves, specific components
and a water hydraulic range with flow metres and electronic boards.
• Services:
Studies, custom design and development, comprehensive project management, equipment modernisation, hydraulic/
electric technical audits and assistance, maintenance contracts, remote maintenance, on-site troubleshooting, approved
repair centre, training, and a stock of parts in Europe.
LOCATIONS
Île-de-France.
314
PARTNERS
Manufacture of mechanical assemblies and wind turbine slewing rings
ZA de l’Espérance, 85600 Saint-Hilaire-de-Loulay
+33 (0)2 28 15 07 23
+33 (0)2 51 08 89 08
www.groupe-et.com [email protected]
ORGANIZATION
A Europe Technologies company, Oratech Innovation is a specialist in complex, large-scale machining for prototypes
and small production runs. Oratech also creates moulds for composite parts.
ACTIVITIES
Oratech Innovation is skilled in building mechanical assemblies such as metal moulds and machining many large,
metal parts for the aeronautics, defence, wind power, nuclear, and transport sectors. It also produces metal moulds for
composite parts. In 2008, Oratech’s activities in the wind power sector represented nearly 5% of its turnover, and it is
intending to increase this percentage. Oratech is an assembly expert. Its resources include fitter-assemblers, buildings
equipped with large lifting and handling equipment and it is considering the assembly of wind turbine parts for the future.
LOCATIONS
315
SUPPLIERS
Pays de la Loire.
MANUFACTURERS
SUBSIDIARY OF EUROPE TECHNOLOGIES-
TRAINING CENTRES
BUSINESSES SELECTED
ORATECH INNOVATION
O
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SUPPLIERS
O
ORMAZABAL - ORMAPOST
SUBSIDIARY OF VELATIA-
Ormazabal is one of the world’s leading manufacturers of medium-voltage units and
gives its clients solutions with high value-added products and services for publically
run electrical grids as well as applications for private clients
ZI, rue des Ferancins, 71210 Torcy
+33 (0)3 85 80 07 40
www.ormazabal.com [email protected]
ORGANIZATION
A range of products adapted to the ERDF network has been developed: units, transformers, prefabricated substations.
Ormazabal’s French Factory, Ormapost, in Torcy (Saône-et-Loire), received ERDF seal of approval in 2003 and has had
ISO 9001 Certification since 2005.
Ormapost manufactures transformer substations, in concrete mono-block structures, and manages every phase of
the manufacturing process.
With high industrial standards, Ormapost guarantees delivery deadlines and quality control over the entire production
and after-sales process.
ACTIVITIES
In the renewables sector, Ormazabal offers its clients optimised solutions with a full range of prefabricated substations
with modification and distribution services, according to technical specifications.
These substations (Preforma, PFU, Ormabat, CFI...) are fully equipped including units, incorporated low-voltage and
medium-voltage transformers.
LOCATIONS
Burgundy.
316
PARTNERS
ZAE La Bayette, 83220 Le Pradet
+33 (0)494 036 584
+33 (0)494 666 232
www.osean.fr [email protected]
ORGANIZATION
OSEAN is one of the European Leaders of the underwater acoustic measurement systems.
ACTIVITIES
LOCATIONS
OSEAN headquarters are in Southern France near Toulon.
OSEAN’s coverage is national and international.
317
SUPPLIERS
OSEAN designs and manufactures underwater electronic systems in the fields of Marine Renewable Energies, Defence,
Oceanographic Research.
OSEAN proposes a wide range of programmable acoustic data loggers for impact studies, construction monitoring...
Depending on the application, their main features are the following:
• Bottom-fixed or floating sytems.
• Programmable at any time (floating systems).
• 4 hydrophone inputs.
• Very low noise.
• Great autonomy thanks to low power electronic and high performance batteries.
• Large storage capacity, up to several Teraoctets.
• Wide choice of communication: WiFi, GSM, Radio, Iridium satellite or ethernet cable.
More info at: http://www.osean.fr/pdf/osean_versatile_data_loggers.pdf
OSEAN supplies underwater lighting fixtures: high power & efficiency metal halide bulbs or DMX controlled/programmable
LED modules.
More info at: http://www.osean.fr/en/illumination-lights.php
MANUFACTURERS
Bioacoustic systems to monitor and manage underwater noise impact
TRAINING CENTRES
BUSINESSES SELECTED
OSEAN
O
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
SUBSIDIARY OF MS GROUP-
Civil works, foundations, and power grids
6 A chemin des près, 38240 Meylan
+33 (0)4 76 18 95 97
+33 (0)4 76 18 95 92
www.otengineering.fr [email protected]
ORGANIZATION
SAS (Simplified private limited company) with a capital of €600,000. Turnover of €9,200,000. 48 employees.
ACTIVITIES
• Civil works for foundations (wind turbines and hydroelectric plants).
• Dry utilities (telecommunications and energy distribution).
• Solar power: underground networks and wiring.
OT Engineering provides construction activities to developers and major installers.
LOCATIONS
Head office: Rhône-Alpes, operating in France and Europe.
SUPPLIERS
MANUFACTURERS
OT ENGINEERING
O
318
PARTNERS
Manufacturer of cranes, davits, and vessels
ZA les Basseaux - BP 73, 26802 Étoile-sur-Rhône cedex
+33 (0)6 27 43 33 81
+33 (0)4 75 60 77 54
www.palfingermarine.com wind@palfinger.fr
ORGANIZATION
SA (French limited liability company) with turnover of €70 billion. Palfinger France is part of the Vincent group. It has
a staff of 45 employees at 3 assembly sites, 35 dealers and 135 after-sale service points in France.
ACTIVITIES
Palfinger BU Wind is the world’s foremost company for offshore wind turbine cranes for the handling of nacelles,
masts, and electrical and logistics platforms. Provider to all offshore wind turbine manufacturers. Owned by the
Palfinger family, the company’s head office is located in Austria, where its wind power activities are based. It works in
conjunction with plants and subsidiaries around the world. Palfinger Neddeck Marine provides evacuation solutions
for platforms (davits and boats).
LOCATIONS
319
SUPPLIERS
Rhône-Alpes.
Head office in Etoile-sur-Rhône near Montélimar and operating across France via its offices in all major cities and at
least one office per French département.
MANUFACTURERS
SUBSIDIARY OF PALFINGER AG (AUSTRIA)-
TRAINING CENTRES
BUSINESSES SELECTED
PALFINGER FRANCE
P
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Manufacturing and selling of hydraulic and pneumatic components and systems
142 rue de la forêt, 74130 Contamine-sur-Arve
+33 (0)4 50 25 80 25
+33 (0)4 50 03 67 37
www.parker.com www.parkerfrance.fr [email protected]
ORGANIZATION
With annual sales of $13 billion in fiscal year 2013, Parker Hannifin is the world’s leading diversified manufacturer of
motion and control technologies and systems, providing precision-engineered solutions for a wide variety of mobile,
industrial and aerospace markets.The company employs approximately 58,000 people in 49 countries around the world.
ACTIVITIES
Main products: fittings, hoses, quick couplings, filters, seals, cylinders, hydraulic, pneumatic and electromechanical
systems. Many value added services complete this unmatchable offer of products and systems: EDI, kitting, emergency
hose repair and replacement service… Parker offers a first class service to its customers.
LOCATIONS
Rhône-Alpes.
SUPPLIERS
MANUFACTURERS
PARKER HANNIFIN FRANCE SAS
P
320
PARTNERS
Manufacturer of hydropneumatic accumulators and heat exchangers
16 rue de Seine, 92704 Colombes cedex
+33 (0)1 41 19 17 00
+33 (0)1 41 19 17 20
www.olaer.fr www.parker.com [email protected]
ACTIVITIES
Parker Olaer supplies accumulators and heat exchangers for all manufacturing industries, especially wind power. Parker
Olaer, with its experience in this field, helps clients at all stages of their projects by the development of dedicated
determination software, simulation tools, special constructions, a wide range of Olaer accumulators (bladders,
membranes, and pistons), cooling solutions (air/oil and water/oil exchangers, circulation pumps), and international
support with sales companies around the world.
TRAINING CENTRES
BUSINESSES SELECTED
PARKER OLAER
LOCATIONS
321
SUPPLIERS
MANUFACTURERS
Île-de-France, Rhône-Alpes, and abroad.
P
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
PIRIOU
SUBSIDIARY OF PIRIOU GROUP-
Shipbuilding, repair and naval engineering
ZI du Moros - BP 521, 29185 Concarneau
+33 (0)2 98 97 09 48
+33 (0)2 98 97 20 36
www.piriou.com [email protected]
ORGANIZATION
Piriou is a specialist in shipbuilding and ship repair for medium sized vessels with high value added, thanks to high
performance engineering, combined with the worldwide locations of its industrial sites.
ACTIVITIES
LOCATIONS
SUPPLIERS
MANUFACTURERS
Global custom solutions for a large range of vessels for artisanal or industrial fishing, offshore oil&gaz service, offshore
wind service, towing, public service’s vessels and patrol duties.
P
322
PARTNERS
ZAC Marmande Sud, 47250 Samazan
+33 (0)5 53 64 22 22
+33 (0)5 53 64 20 76
www.plastinov-composite.fr [email protected]
ORGANIZATION
Plastinov SNE’s main area of expertise is the design and production of composite material parts (polyester or epoxy).
It has a team of 25 employees.
ACTIVITIES
Plastinov is active in the wind power, nautical, and aeronautical industries. Its engineering office and research and
development department allow Plastinov to cover all the manufacturing stages based on client drawings, including
master casts and moulds.
With over 25 years of experience in composites, Plastinov can adapt to client requests in particular thanks to its
various production methods, which include 5-axis numerical control, simultaneous projection, numerical cutting,
vacuum forming, infusion, and RTM.
LOCATIONS
323
SUPPLIERS
Aquitaine.
MANUFACTURERS
Manufacture of composite material parts
TRAINING CENTRES
BUSINESSES SELECTED
PLASTINOV SNE
P
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
PROMARITIME INTERNATIONAL
Freight forwarding - Port handling - Shipping office - Lifting
19 boulevard du Midi, 76108 Rouen cedex
+33 (0)2 35 73 63 10
+33 (0)2 35 73 63 93
www.promaritime.fr [email protected]
ACTIVITIES
Promaritime International has long been established in port activities in Normandy. Its experienced staff conduct
operations for shipping, handling, port lifting, heavy-package transport, ship freighting, and door-to-door logistics.
Promaritime’s trademark is its proximity to clients and its ability to implement customised solutions. The entire
Promaritime team is bilingual and available 24/7.
LOCATIONS
SUPPLIERS
MANUFACTURERS
Promaritime has been established in Normandy for many years (in Rouen and Dieppe), and recently opened three
offices on the Mediterranean coast in Fos-sur-Mer, Sète, and Port-La-Nouvelle.
P
324
PARTNERS
Distributor of aircraft warning lights
ZI Stelytec - Allée Galilée, 42400 Saint-Chamond
+33 (0)4 77 47 52 74
+33 (0)4 77 47 52 57
www.light.promic.fr [email protected]
ORGANIZATION
For over 20 years, Promic has been the preferred partner for companies using high-tech optical glass and reflectors.
Due to the need to constantly improve the optical quality of its aircraft warning lights, the French company Promic
has established a partnership with the Italian manufacturer Luxsolar to become its exclusive distributor in France.
Founded in 2005, Luxsolar has rapidly become an expert in lighting systems for high-risk areas and now manufactures
LED aircraft warning lights.
TRAINING CENTRES
BUSINESSES SELECTED
PROMIC
Promic distributes LED aircraft warning lights that are certified by STAC (the civil aviation technical department) and
compliant with ICAO (International Civil Aviation Organisation).
Whether low-intensity or high-intensity, type A, B, C, or AB, Promic distributes products adapted to aircraft warning lights
for wind turbines and wind measurement masts. It also offers GPS synchronisation and backup electrical cabinets
which are essential for aviation safety around wind farms.
Promic also makes aircraft warning light kits for wind measurement masts. The kits are completely autonomous thanks
to a solar panel and batteries incorporated in an underground box.
Through partnerships with companies that install aircraft warning lights and met masts, Promic is fully able to respond
to the requirements of wind power industry professionals.
Promic is located in Rhône-Alpes. Its products are available in all French-speaking countries.
Luxsolar is based in Italy.
325
SUPPLIERS
LOCATIONS
MANUFACTURERS
ACTIVITIES
P
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SUPPLIERS
R
REETEC FRANCE
Wind farm solutions
10 avenue de la Jasse - ZAE de Viargues, 34440 Colombiers
+33 (0)4 67 09 83 63
+33 (0)4 67 09 83 70
www.reetec.eu [email protected]
ORGANIZATION
REETEC is a company with its head office in Bremen. With over 200 employees in Europe, REETEC has been specialised
in wind power for 18 years and its unique expertise is acknowledged by all the players in the wind power industry.
ACTIVITIES
• SAFETY:
Painstaking preparation for operations, integrating safety procedures every step of the way.
• AIRCRAFT WARNING LIGHTS:
Design and manufacture of aircraft warning lighting which complies with all European standards for onshore and
offshore wind turbines - Systems incorporating highly-specific LED technology which many demanding turbine
manufacturers have selected for their machines - Installation possible on existing sites.
• BLADES:
Inspections with full reports, including very high definition photos to monitor changes in defects over time - Turnkey
repairs, from rolling to repairs of blades on the ground (turnkey solutions).
• REPLACEMENT OF LARGE COMPONTS:
Partnership with the major players in the lifting sector - Highly responsive, in France and abroad - Turnkey: REETEC
manages entire projects all the way to commissioning - Diversified expertise: replacement of gearboxes, generators,
blades, bearings, nacelles, etc.
• MAINTENANCE:
Corrective or preventive, on multiple types of turbines. Eighteen years of experience in the field.
• INSTALLATION:
In partnership with the major players in the transport and lifting sector - Turnkey assembly: from the plant all the way
to commissioning - A single point of contact throughout the project for transport, construction, and hoisting.
LOCATIONS
326
PARTNERS
Design and manufacture of seals
Zone industrielle du bois Bernoux, 71290 Cuisery
+33 (0)3 85 32 10 14
+33 (0)3 85 32 52 12
www.repack-s.com [email protected]
ACTIVITIES
Design and manufacture of seals and sealing systems, including for rotors and hydraulic cylinders. 33 employees.
Areas of expertise: PTFE, elastomers, and technical plastics.
R&D for new profiles and seals. In-house test centre/test bench.
LOCATIONS
TRAINING CENTRES
BUSINESSES SELECTED
REPACK-S
327
SUPPLIERS
MANUFACTURERS
Burgundy.
R
PARTNERS
BUSINESSES SELECTED
Lifting, handling, and special transport
26-28 boulevard Frédéric Sauvage, 13014 Marseille
+33 (0)4 42 05 60 61
+33 (0)4 42 05 69 75
www.groupe-revel.fr [email protected]
ACTIVITIES
Revel specialises in lifting, handling, work platforms, transport logistics and telecommunications. It also carries out
wind turbine lifting operations.
LOCATIONS
Revel has 13 locations with 180 employees.
SUPPLIERS
MANUFACTURERS
TRAINING CENTRES
REVEL
R
328
PARTNERS
DEPARTMENT OF DEFONTAINE SA-
Manufacture of slewing rings, including blade and yaw bearings for wind turbines
Rue Saint-Eloi, 85530 La Bruffière
+33 (0)2 51 45 94 94
+33 (0)2 51 45 92 98
www.rollix.com [email protected]
ORGANIZATION
Defontaine SA has 825 employees at its La Bruffière site.
ACTIVITIES
MANUFACTURERS
Design and manufacture of slewing rings for wind turbine blades and nacelles.The Rollix range of rings covers all wind
turbine applications, from small turbines to the latest multi-megawatt offshore turbines. Rollix rings can be found in
40,000 wind turbines around the world, representing rated power of 67 GW (including 2.1 GW off shore).
TRAINING CENTRES
BUSINESSES SELECTED
ROLLIX - DEFONTAINE
LOCATIONS
329
SUPPLIERS
Pays de la Loire.
Rollix’s main plant is located in La Bruffière, south of Nantes.
R
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
ROXTEC FRANCE SAS
Modular sealing systems
37 rue La Fayette - Bâtiment B, 75009 Paris
+33 (0)1 82 73 02 00
+33 (0)1 40 82 99 98
www.roxtec.com [email protected]
ORGANIZATION
Dedicated to safety since 1990.
Roxtec was founded due to the invention of a unique technology called Multidiameter™, which allows products to
be easily adapted to all diameters of cables and pipes using modules with peelable layers. Now a world leader on its
market, Roxtec is present worldwide through a dense network of subsidiaries that provide clients with the best possible
service and technical solutions adapted to their needs.
ACTIVITIES
Roxtec has been working in the wind power sector around the world for more than 10 years and has developed
extensive expertise in cable bushings and modular pipework. Its solutions are regularly used in all fields related to
energy production and distribution.
Its products provide varied and cumulative protection, such as fire resistance up to two hours, sealing against water
(up to 4 bars) and gas (2.5 bars), electromagnetic compatibility (EMC), and rodent protection.
Roxtec’s solutions are multi-purpose and highly versatile. They can be used in existing bushings or to provide spare
capacity in order to add or change cables in the future. In short, Roxtec helps you save money throughout the lifespan
of your installations.
SUPPLIERS
LOCATIONS
R
Île-de-France.
330
PARTNERS
SUBSIDIARY OF ORTEC GROUP-
Industrial engineering
Route du canal Bossière, 76700 Gonfreville-l’Orcher
+33 (0)2 35 25 62 50
+33 (0)2 35 25 62 59
www.som-industrie.com [email protected]
ORGANIZATION
SOM is a French engireering company created in 1980. The company has 1,000 employees and a 85 million euro
turnover.
TRAINING CENTRES
BUSINESSES SELECTED
S.O.M. (Services Organisation
Méthodes)
SOM operates across all industrial sectors. Our pragmatic approach to project management brings our clients
technological expertise and cost efficiency. SOM can provide the following services :
• Project Management
• QHSE Project Engineering
• Engineering and Regulatory Monitoring
• Maintenance Engineering
• Certified Professional Training
Aix-en-Provence (Head office), Le Havre, Paris, Lyon, Martigues.
331
SUPPLIERS
LOCATIONS
MANUFACTURERS
ACTIVITIES
S
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
www.safor.fr
Z.I de Jarry - BP 2118, 97193 Jarry cedex
+33 (0)5 90 26 76 43
+33 (0)5 90 26 94 32
[email protected] [email protected] [email protected]
ORGANIZATION
Founded in 1980, SAFOR is one of the leaders in the French Guiana region in geotechnics, special foundations, nails,
the environment, and maritime construction.
ACTIVITIES
Geotechnics is one of SAFOR’s main activities. It works in partnership with local and national soil engineering offices.
SAFOR conducts most types of soil testing, including pressuremeter tests, core drilling, SPT tests, drilling parameter
recording, water tests, piezometers, installation of pore pressure metres and settlement gauges, crosshole test drilling,
installation of inclinometric pipes, and pumping tests.
LOCATIONS
Antilles and Guiana.
SUPPLIERS
MANUFACTURERS
SAFOR
S
332
PARTNERS
Design and production of high-tech batteries for industry
12 rue Sadi Carnot, 93170 Bagnolet
+33 (0)1 49 93 18 56
+33 (0)1 49 93 19 55
www.saftbatteries.com
ACTIVITIES
Saft (Euronext: SAFT) is a world leader in the design and manufacture of advanced technology batteries for industry.
The Group is the world’s leading manufacturer of nickel batteries and primary lithium batteries for the industrial
infrastructure and processes, transportation, civil and military electronics’ markets. Saft is the world leader in space
and defence batteries with its Li-ion technologies which are also being deployed in the energy storage, transportation
and telecommunication markets. Saft’s 3,800 employees present in 18 countries, its 15 manufacturing sites and
extensive sales network all contribute to accelerating the Group’s growth for the future.
MANUFACTURERS
LOCATIONS
TRAINING CENTRES
BUSINESSES SELECTED
SAFT
333
SUPPLIERS
Île-de-France.
S
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SAIPEM
Engineering, construction, installation, and maintenance
1/7 avenue San Fernando, 78884 Saint-Quentin-en-Yvelines
+33 (0)1 61 37 85 25
+33 (0)1 61 37 62 88
www.saipem-sa.com [email protected]
ORGANIZATION
Founded over 50 years ago, the Italian group, Saipem is a world leader in services to onshore and offshore oil and gas
industries. Saipem has three units: offshore, onshore, and drilling. Saipem operates in over 35 countries and has one of
the world’s largest fleets of machines for installing offshore structures and pipelines, and onshore and offshore drilling.
The company currently has 36,500 employees of 120 different nationalities. In 2009, it made €10.3 billion in turnover.
ACTIVITIES
Saipem SA is the French subsidiary of the Saipem group. Saipem SA specialises in onshore activities, some offshore
activities, marine construction, engineering, and research and development. With the group’s offshore experience in
marine construction and oil rigs, Saipem SA has developed installation systems for offshore wind turbines both with
tubular foundations (monopile and multipod), and gravity base foundations, as well as for the installation of the wind
turbines themselves. The company has conducted numerous feasibility, design, and technical and financial pre-project
studies for French and foreign operators, and is capable of executing complete EPC projects.
LOCATIONS
SUPPLIERS
Île-de-France.
S
334
PARTNERS
BUSINESSES SELECTED
SARENS FRANCE
SUBSIDIARY OF SARENS GROUP-
Special transport and lifting
TRAINING CENTRES
54 avenue de la Gironde, 59640 Dunkerque
+33 (0)3 28 64 01 10
+33 (0)3 28 64 01 11
www.sarens.com [email protected]
ACTIVITIES
MANUFACTURERS
General activities:
• Lifting
• Engineering, handling technology
• Hiring of cranes with 30 to 2,000 tonnes of capacity (lattice and telescopic booms)
• Road, river, and maritime transport.
Wind power-related activities (company dedicated to this sector: Sarens Wind):
The company offers three types of services in this field:
• Lifting
• Combined lifting and assembly of wind turbines
• Combined lifting, assembly, and transport of wind turbines.
LOCATIONS
335
SUPPLIERS
Centre, Haute-Normandie, Basse-Normandie, and Provence-Alpes-Côte d’Azur.
S
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
SUBSIDIARY OF GENOYER GROUP-
Manufacture of flanges and forged blanks for slewing rings
La Gare - BP 6, 42130 Boën
+33 (0)4 77 96 80 00
+33 (0)4 77 96 80 50
www.sbs-forge.com [email protected]
ORGANIZATION
SBS is part of the Genoyer group, a leading industrial and commercial operator for major international petroleum,
gas, and water projects.
ACTIVITIES
SBS manufactures forged and machined parts for various industries, such as oil and gas, nuclear, mechanical engineering,
and wind power. In 2008, it achieved €43 billion in turnover, 35% of which came from export. For the wind power
industry, SBS makes parts for masts, slewing ring blanks, and various forged blanks for the production of reduction gears.
LOCATIONS
Rhône-Alpes.
SUPPLIERS
MANUFACTURERS
SBS FORGE
S
336
PARTNERS
SUBSIDIARY OF FOOK TIN TECHNOLOGIES GROUP-
Measurement specialist
Technosite Altéa - BP 501, 74105 Annemasse cedex
+33 (0)4 50 87 78 64
+33 (0)4 50 87 78 42
www.scaime.com [email protected]
ORGANIZATION
Scaime is a company specialising in the design and production of industrial weighing and measurement solutions.
The company is renowned for its technological expertise and the quality of its products. Scaime is a world leader in
its field. Its production methods are flexible enough to manufacture items individually or in mass production. It is ISO
9001-certified, guaranteeing that products comply with international norms and standards. Its growth strategy involves
investing heavily in research and development in order to constantly offer new innovative solutions.
TRAINING CENTRES
BUSINESSES SELECTED
SCAIME SAS
Rhône-Alpes.
Scaime is present in 65 countries through a network of subsidiaries and distributors.
337
LOCATIONS
SUPPLIERS
In line with its desire to bring its clients new solutions, Scaime has developed fibre-optic measurement systems. As
development on the wind turbine market is considered to be strategic, Scaime has developed a range of solutions
specially designed for this market. Scaime offers stress sensors, temperature sensors, inclinometers, and other functions
to give clients added value, as well as data acquisition units developed and produced in-house by Scaime using its
electronics expertise. The MDX400T-X is a multi-channel unit with a measurement frequency of 100 Hz. It comes in
a stainless steel box with an IP66 protection rating, and is equipped with sealed connectors. The MDX400T-X comes
with an intuitive, user-friendly web interface that lets you configure the entire system and transfer data using the TCP-IP
protocol. Communication is also possible using the CANopen protocol. Scaime’s solution can be conveniently installed
in various parts of a wind turbine, including the blades, mast, or foundations. It has many uses, from continuous
monitoring of blade loads, to managing alerts, detecting ice, and estimating remaining lifespan.
MANUFACTURERS
ACTIVITIES
S
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SCHAEFFLER FRANCE SAS
SUBSIDIARY OF SCHAEFFLER TECHNOLOGIES AG & CO. KG-
Mechanical drives
93 route de Bitche - BP 30186, 67500 Haguenau
+33 (0)3 88 63 40 40
+33 (0)3 88 63 40 41
www.schaeffler.fr info.fr@schaeffler.com
ORGANIZATION
Schaeffler develops and manufactures precision products for everything that moves – in machines, equipment, and
vehicles as well as in aviation and aerospace applications – with its INA, LuK, and FAG brands.
ACTIVITIES
For over 30 years, INA and FAG have designed and produced bearing arrangements for wind turbines. Within Schaeffler
Group Industrial, the specialists from the business unit “Wind power” work closely with designers, manufacturers
and operators of wind turbines. As early as the concept phase, detailed attention is paid to customer requirements.
Bearing selection and documentation are backed up by sophisticated calculation methods. Products developed to a
mature technical level are optimally matched to the particular task. The range is intelligently rounded off by Condition
Monitoring systems, lubricants, mounting and maintenance tools. In this way, Schaeffler Group Industrial helps to
achieve low operating costs for wind turbines.
LOCATIONS
SUPPLIERS
Alsace, France.
S
338
PARTNERS
BUSINESSES SELECTED
Low-friction INA and FAG rolling bearings are
used worldwide in the drive train of modern
wind energy turbines (from 220 KW to the
latest multi-megawatt class).
339
SUPPLIERS
The split spherical roller bearings FAG ensure
for example the proper performance of the
wind turbines and reduce the friction of the
deep groove ball bearings Generation C
implanted in electric motors by 35 %.
TRAINING CENTRES
An extensive range of products and services
are made available by Schaeffler to original
equipment manufacturers and operators of
wind energy plants.
MANUFACTURERS
Our actions today will shape
our world of tomorrow
X
PARTNERS
BUSINESSES SELECTED
SCHNEIDER ELECTRIC FRANCE
Energy
gy management
g
35 rue Joseph Monier, 92506 Rueil-Malmaison cedex
+33 (0)4 7660 5885
www.schneider-electric.com [email protected]
SUPPLIERS
MANUFACTURERS
TRAINING CENTRES
ORGANIZATION
S
A world specialist in energy management present in over 100 countries, Schneider Electric offers integrated solutions
for many market sectors.The group is a leader in energy, infrastructures, industrial processes, building automation, data
centres and networks and has a large presence in residential applications. Focused on making energy safe, reliable,
and efficient, the company’s 114,000 employees achieved a turnover of more than €18.3 billion in 2008, through an
active commitment to help individuals and organisations make the most of their energy.
ACTIVITIES
Schneider Electric offers wind power solutions that provide greater energy efficiency and reduced maintenance. These
solutions are divided into two approaches, one for wind turbine manufacturers and one for wind farm developers and
operators. Wind turbine manufacturers will find solutions for the main electrical system of turbines (from generators–
which are not included–to grid connections), for wind turbine monitoring, and for all auxiliary electric systems (nacelle
orientation, blade orientation, lighting, heating, climate control, and goods lifts). Developers and operators will find
solutions for connecting wind turbines to each other (MV electrical grid), connecting the entire wind farm to the
electrical grid, and supervising wind farms remotely.
LOCATIONS
Through Schneider Electric France’s sales offices (www.schneider-electric.fr),
Schneider Electric SA is present in France in Aix-en-Provence, Ganaches (Pringy), Belfort, Bordeaux (Pessac), Brest,
Caen (Bourguebus), Calais (Coquelles), Clermont-Ferrand (Aubière), Compiègne, Dijon (Longvic), Fontenay, Grenoble,
Lille (Seclin), Limoges, Lyon (Saint-Priest), Metz, Montpellier, Nantes, Nice - Côte d’Azur, Orléans, Paris - Massy, Paris Saint-Denis, Pau (Lescar), Reims, Rennes (Cesson-Sevigné), Rouen (Mont St-Aignan), Strasbourg (Illkirch-Grafenstaden),
Toulouse, and Tours.
Its subsidiaries manufacture: conversion substations (PV Box) and prefabricated delivery substations for photovoltaic
power plants at the St-Alban Leysse (Savoie) site, monitoring and supervision systems (Kerwin/iRIO) at the Beymost
(Rhône) site, residential photovoltaic boxes (SunEzy line) at the Sarre-Union (Bas-Rhin) site, LV and MV switchgear,
electrical cabinets and transformers for photovoltaic power plants, at the Alès (Haute-Garonne), Chalons (Saône-etLoire), Montmélian (Savoie), Libourne (Gironde), and Maizières-les-Metz (Moselle) sites.
The Project Engineering Centre (PEC) is based in Grenoble (Isère) and is a world skills centre, providing turnkey
electrical solutions for photovoltaic power systems to investors and integrators.
340
PARTNERS
Production of resins, gelcoats, and structural adhesives for the manufacture of wind
turbine blades
65 rue Sully - BP 51601, 80016 Amiens cedex 1
+33 (0)3 22 66 27 66
+33 (0)3 22 66 27 80
www.scottbader.fr [email protected]
ORGANIZATION
Scott Bader is a subsidiary of the Scott Bader Group. It has 600 employees, 10% of which work in research and
development and is present on every continent. Scott Bader is a European leader in synthetic resins and stands out
thanks to its unique financial structure that has no outside shareholders.
BUSINESSES SELECTED
SUBSIDIARY OF SCOTT BADER LTD-
TRAINING CENTRES
SCOTT BADER SA
The company is specialised in the development and production of structural adhesives and resins, as well as gelcoats
for the production of wind turbine nose cones, nacelles, and blades. Scott Bader is a leader in several industries,
including sailing, relining, polymer concrete, and transport.
LOCATIONS
341
SUPPLIERS
Picardy.
Production sites: England, France, Croatia, South Africa, and Dubai.
Distribution companies: USA, China, Scandinavia, Spain, Germany, and Czech Republic.
MANUFACTURERS
ACTIVITIES
S
X
SUPPLIERS
342
© AREVA
MANUFACTURERS
TRAINING CENTRES
BUSINESSES SELECTED
PARTNERS
PARTNERS
Manufacture and sale of gensets
12 bis rue de la Villeneuve - ZI de Kergonan, 29200 Brest
+33 (0)2 98 41 41 41
www.sdmo.com [email protected]
ORGANIZATION
SDMO is acknowledged as a world leader in gensets, welding units, and motor pumps.
ACTIVITIES
2
SDMO has 31,000 m of production facilities, not including its logistics operations. It designs, manufactures, and
installs standard gensets from 1 to 3,300 kVA. It also provides engineering expertise for the construction of custombuilt power plants. No matter the size or purpose of your genset, SDMO’s ISO 9001-certified quality processes ensure
that each product it designs meets your performance expectations and schedule.
MANUFACTURERS
LOCATIONS
TRAINING CENTRES
BUSINESSES SELECTED
SDMO
343
SUPPLIERS
Brittany.
S
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SUPPLIERS
S
SDI (Société de Dragage
International)
SUBSIDIARY OF DEME GROUP-
Construction of offshore wind farms
Parc du Pont Royal - 251 avenue du Bois, Batiment i, 59130 Lambersart
+33 (0)3 20 10 87 30
+33 (0)3 20 34 77 08
www.sdi-deme.fr
ORGANIZATION
With 150 years of experience in maritime construction and 10 years in offshore wind farms, Société de Dragage
International (SDI) offers its expertise for the construction of offshore wind farms.
Its knowledge and the assistance of its parent company, DEME, make SDI an obvious partner for offshore wind farms
and projects. Its skills cover pre-feasibility studies to assistance in wind farm operation.
SDI has a modern, versatile, innovative, scalable fleet of 90 ships and 200 auxiliary units.
ACTIVITIES
All types of offshore wind farm construction, including:
• Preliminary studies (hydrographic studies, seabed studies, mast installation, foundation sizing, and technology decisions)
• Foundations (dredging, bed, erosion protection, drilling and driving, transport, installation)
• Wind turbines (lifting, transport, assembly, installation)
• Connections (trench, directional drilling, installation)
• Maritime assistance in maintenance and operation of offshore wind farms.
SDI worked at the following offshore wind farms: Outer Thames Estuary off the North Kent Coast (UK), 2013-2015;
Borkum Riffgrund 01 (DE), 2013-2014; (Northwind) Lodewijkbank (BE), 2013-2014; Belwind II OWF (BE), 2013; Le
Tréport (FR), 2013; (Dong) Westermost Rough (UK), 2013-2014; Borkum West II (DE), 2011-2012; Thortonbank II +
III (BE), 2011-2013; Humber Gateway (UK), 2011-2012; Baltic II (DE), 2010-2013; Walney I & II (UK), 2010-2011;
Ormonde (UK), 2010; Alpha Ventus (DE), 2009; Thortonbank I (BE), 2007-2011; 2000-2007: Utgrunden (SU); Horns
Rev, Samso I, Rodsand (DK); Béatrice (UK).
LOCATIONS
Nord-Pas de Calais.
344
PARTNERS
MANUFACTURERS
TRAINING CENTRES
BUSINESSES SELECTED
Member of the DEME group
Self-elevating platform “Neptune”.
C-Power project, Belgium.
From the beginning, the “Société de Dragage International” (S.D.I.),
French branch of the DEME group, has been a real pioneer on major
marine and waterways projects in France.
Innovative marine and offshore solutions
adapted to a continuously changing environment
S.D.I. and the DEME group, propose a total solution for offshore wind
farm construction, and provide a full range of specialized services: from
geotechnical, geophysical and dimensional studies, over foundation works,
transport, lifting and installation of the wind turbines, to the electrical
connection and marine assistance during the operational phase.
With an experience of over 10 years in the offshore wind sector and over
150 years in it’s core business, the DEME team is ready to create the
offshore wind farms of the future!
345
SUPPLIERS
Société de Dragage
International “S.D.I.” sa
Parc du Pont Royal,
251 avenue du Bois, Bâtiment I
F-59130 Lambersart, France
T +33 (0)3 20 10 87 30
F +33 (0)3 20 34 77 08
[email protected]
www.deme-group.com
DEME: creating land for the future X
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Allée du traité de Rome - BP 74, 59279 Bailleul
+33 (0)3 28 50 00 15
+33 (0)3 28 50 00 16
www.sel-solutions.fr [email protected]
ACTIVITIES
SEL is a specialist in electrical engineering for wind and photovoltaic power plant infrastructure. Services include:
• Designing of all types of delivery and distribution substations
• Cable-laying
• HV and LV connections
• Fibre optics
• HV substations.
These expertises complement each other and allow the SEL group to study, design, and implement comprehensive,
scalable solutions to optimise energy production and distribution. As part of its evolution, the company has invested
in the wind power industry, a field in which it has developed real expertise. SEL expanded into the fast-growing sector
in 2002 and quickly made a name for itself. As it expanded into different markets, SEL developed and designed its
own delivery substations to connect wind turbines to the EDF power grid. Today, SEL earns 70% of its turnover from
the wind power sector.
LOCATIONS
SEL is a small business and has been located at the Bailleul site in Nord (Nord) since it was founded in 2000.
Based between Lille, Dunkerque, and Saint Omer, SEL is ideally located for its market.
SUPPLIERS
MANUFACTURERS
SEL ENERBETON
S
346
PARTNERS
Manufacture of wind turbine masts
2 rue Monge, 22000 Saint-Brieuc
+33 (0)2 96 33 42 77
+33 (0)2 96 61 38 61
www.sous-traiter.com/sema22 [email protected]
ACTIVITIES
SEMA is a boilermaking company with around 20 employees. It specialises in large-scale structures, including tubular
masts for wind turbines.
TRAINING CENTRES
BUSINESSES SELECTED
SEMA (Société d’Entreprise
Metallurgique d’Armor)
LOCATIONS
347
SUPPLIERS
MANUFACTURERS
Brittany.
S
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
SEMANTIC TS
Engineering consulting compagny specialized in acoustic oceanography R&D.
1142 chemin Saint-Roch - Quartier La Baou, 83110 Sanary-sur-Mer
+33 (0)4 94 88 24 58
+33 (0)9 55 78 63 12
www.semantic-ts.fr [email protected]
ORGANIZATION
SEMANTIC TS is an engineering consulting company devoted to acoustic oceanography, hydrograpgy and geophysics.
ACTIVITIES
Environmental measurements : hydrography, geophysics and undrwater acoustics. Bottom classification. Environmental
monitoring. Specific softwares. Measurement campaign at sea. Specific instrumentation. Survey vessel. Underwater
acoustic propagation and communication. Noise.
SEMANTIC TS is established in Provence-Alpes-Côte d’Azur (France), but does not limit its displacements while working
and surveying everywhere in the world.
SUPPLIERS
MANUFACTURERS
LOCATIONS
S
348
PARTNERS
1 bis avenue de la Méditerranée, 81240 Saint-Amans-Soult
+33 (0)5 63 98 06 15
+33 (0)4 92 61 51 17
www.serhy.com [email protected]
ORGANIZATION
SERHY SAS • Capital of €1,540,000 • Castres Trade and Companies Register B379 746 001 • SIRET 379 746 001
00070 • APE Code 7112B • Intracommunity No. FR 78 379 746 001.
ACTIVITIES
• Hydroelectricity: development, studies, execution, project management, operation, property maintenance, buying
and selling of sites, commercialisation of energy purchase contracts, and guarantee of origin.
• Wind power: development, studies, project management, engineering and substantial optimisation of electrical
connections, operation.
• Photovoltaic: development, studies, project management, engineering and optimisation of electrical connections,
operation.
LOCATIONS
349
SUPPLIERS
Midi-Pyrénées, Provence-Alpes-Côte d’Azur, Rhône-Alpes.
MANUFACTURERS
Engineering office, consulting, operation and maintenance
TRAINING CENTRES
BUSINESSES SELECTED
SERHY
S
PARTNERS
BUSINESSES SELECTED
SETEC ENERGY SOLUTIONS
Engineering and consulting
Immeuble le Crystallin - CS 20087 - 191/193 cours Lafayette, 69458 Lyon cedex 6
[email protected]
Setec Energy Solutions specialises in energy production and management in France and abroad. Setec Energy Solutions
handles all missions ranging from studies, assistance to project owners, project management, expert assessment and
assistance for private and public clients. We operate in the following fields: energy efficiency, hydroelectricity, onshore
and offshore wind farms, biomass and fossil thermal energy, geothermics, and solar.
ACTIVITIES
• Consulting: Setec Energy Solutions helps its partners and clients define their projects and develop their strategies
through feasibility studies, project management, due diligence, expert assessment and diagnostics, studies of resource
potential, and general upstream studies (master plan, carbon footprint, strategic advice and studies of energy resources).
• Engineering: Setec Energy Solutions uses its operational trades including civil engineering, hydraulics, equipment and
energy production processes. It performs all the technical studies for the project phase right through to construction
site management.
LOCATIONS
Rhône-Alpes.
SUPPLIERS
MANUFACTURERS
TRAINING CENTRES
ORGANIZATION
S
350
PARTNERS
BUSINESSES SELECTED
SGS QUALITEST INDUSTRIE
Inspections,
p
verifications, analyses
y
and certification
Domaine de Corbeville Ouest, 92100 Orsay
+33 (0)1 69 33 69 14
+33 (0)1 64 46 02 04
www.fr.sgs.com [email protected]
LOCATIONS
Île-de-France.
351
MANUFACTURERS
SGS works on all stages of industrial projects, from design to construction and operation. SGS offers a wide range of
services wind farm projects covering their entire life-cycle to ensure that machines are reliable and efficient. Services
include:
• Studies: design verification, site evaluation, project certification
• Technical consulting: due diligence, project risk management, support for calls for tenders, project owner representation,
assistance for authorisation procedures
• HSE: regulatory audits and consulting, outsourcing
• Supplier monitoring: technical audits and evaluations of suppliers, factory inspections, acceptance testing, follow-up
and reminders
• Verifications: non-destructive testing, quality control/assurance, blade inspections
• Supervision of construction and loading/unloading operations
• At acceptance: functional and safety tests, commissioning supervision, final inspection
• During operation: periodic and end-of-warranty inspections, vibration studies, oil analyses, endoscopies, blade
inspections, damage analyses.
ACTIVITIES
SUPPLIERS
Founded in 1878 in Rouen, SGS is the world leader in inspections, verifications, analyses, and certification. Acknowledged
as a reference for quality and integrity, SGS has over 78,000 employees and a network of over 1,500 offices and
laboratories around the world.
TRAINING CENTRES
ORGANIZATION
S
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SGURRENERGY
Technical consulting
34 rue de Cléry, 75002 Paris
+33 (0)1 44 88 57 10
www.sgurrenergy.com [email protected]
ORGANIZATION
With a track record of over 110 GW and its innovative technologies, SgurrEnergy is recognised as one of the world’s
largest specialists in independent technical consulting in the field of renewable energy (onshore wind energy, offshore
wind energy, photovoltaic power and marine energy).
Founded in 2002 in Scotland • 180 consultants and engineers • 10 international offices, including an office in Paris,
France, since January 2009.
ACTIVITIES
SgurrEnergy’s impartial technical expertise is called upon during the entire life-cycle of a renewable energy project
by project owners, investors (due diligence), operators and manufacturers. Objectives: To significantly reduce risk and
significantly increase project value. SgurrEnergy has developed Galion, second-generation LIDAR remote detection
technology. Objectives: Improve understanding of wind resources and optimise wind farm performance. Project
design/development • Resource measurement/analysis (using met masts, LIDAR, SODAR) • Calculation of production
potential • Selection of sites • Feasibility studies • Sizing and optimisation • CFD • Technology audits • Electrical and
civil engineering, control systems • Pre-contract phases • Completely impartial technical and financial due diligence
(financing or project transfers/acquisitions) • Consulting for operation and maintenance.
Products: Galion; Orqa (offshore measurement and data analysis platform); SgurrSCADA (SCADA data analysis software).
SUPPLIERS
LOCATIONS
S
Île-de-France.
352
PARTNERS
84 rue Edouard Vaillant, 93351 Le Bourget
+33 (0)1 49 92 80 33
+33 (0)1 49 92 80 97
www.sika.fr [email protected]
ORGANIZATION
Sika is an independent Swiss group founded in 1910. It has a worldwide presence with over 15,000 employees
in 74 countries. Sika France SA has over 650 employees and an annual turnover of more than €280 million in the
construction and industry trades.
ACTIVITIES
Sika Industry develops solutions for bonding, sealing, soundproofing, and reinforcement for industry (automotive,
marine, transport, and construction components). Its products are particularly used in windows, façades, structural
glass bonding, photovoltaic and thermal panels, and solar concentrators. With more than 30 years of experience in
developing façade solutions (bonded exterior glass), and over 15 years in renewable energy, Sika has a complete
line of adhesives for assembling photovoltaic and thermal panels and solar concentrators, as well as for building
wind turbines from the foundations (concrete additives, anti-corrosion systems) to the blades. Its adhesives for the
solar power industry have been optimised to combine performance, ease of use, and setting time to enable largescale, automated application. With worldwide assistance available for all your projects, Sika is the ideal partner for
manufacturers of solar power systems.
MANUFACTURERS
Assembly and sealing solutions for renewable energy
TRAINING CENTRES
BUSINESSES SELECTED
SIKA INDUSTRY
LOCATIONS
353
SUPPLIERS
Île-de-France.
S
X
SUPPLIERS
354
© ALSTOM
MANUFACTURERS
TRAINING CENTRES
BUSINESSES SELECTED
PARTNERS
PARTNERS
Sale of sealing components and systems and anti-vibration parts
170 rue Branly, 71020 Mâcon cedex 9
+33 (0)3 85 29 30 00
+33 (0)3 85 29 30 87
www.simrit.com [email protected]
ORGANIZATION
Freudenberg Simrit SAS has 70 employees. It is a subsidiary of the Freudenberg group, which has 35,000 employees
worldwide. Its head office in France is located in Mâcon, and the sales department in Emerainville (77). In 2009,
Freudenberg Simrit SAS had a turnover of €40 million.
ACTIVITIES
Thanks to its cutting-edge technology, Simrit already operates in numerous segments of the wind power industry, with
renowned products and solutions adapted to the requirements of the sector. The large number of products known
worldwide such as sealing rings (Simmerring), hydraulic components (Merkel), hydraulic accumulators (Integral
Accumulator), O-rings, and liquid silicone products is proof of Simrit’s positioning on the market. With specific solutions
and anti-vibration systems, Simrit has the largest selection of products in this field.
LOCATIONS
355
SUPPLIERS
Burgundy, Île-de-France.
Sales division: Freudenberg Simrit SAS
49 bis Avenue de l’Europe - La Malnoue/Emerainville
77436 Marne La Vallée cedex
Tel +33 (0)1 60 95 89 00 - Fax +33 (0)1 60 95 89 29
MANUFACTURERS
SUBSIDIARY OF FREUDENBERG GROUP-
TRAINING CENTRES
BUSINESSES SELECTED
SIMRIT
S
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Bearings manufacturer
ZA de l’Observatoire - 34 avenue des Trois Peuples - 78180 Montigny-le-Bretonneux
+33 (0)1 30 12 73 00
+33 (0)1 30 12 76 50
www.skf.com [email protected]
ORGANIZATION
The SKF group is the world’s leading supplier of bearings, lubrication systems, mechatronics, seals and services.
ACTIVITIES
SKF designs bearings, seals and couplings, as well as lubrication and vibration monitoring systems that work in tandem
with its Remote Diagnostic Centres. The company develops bespoke solutions such as gearbox kits and made-to-order
seals to help wind-turbine operators increase production and cut costs. SKF also supplies equipment such as Hydrocam
bolt tensioners, endoscopes and alignment systems.
SKF engineers and teams regularly work alongside OEMs and wind farm operators to help them improve equipment
efficiency and increase energy savings, whilst at the same time reducing their impact on the environment.
LOCATIONS
9 sites in France including:
• Avallon (89) - slewing bearings
• Saint-Cyr sur Loire (37) - generator bearings
• Montigny-le-Bretonneux (78) - Hydrocam tensioners and Remote Diagnostic Centre.
SUPPLIERS
MANUFACTURERS
SKF IN FRANCE
S
356
PARTNERS
MANUFACTURERS
7KH3RZHURI.QRZOHGJH(QJLQHHULQJ
BUSINESSES SELECTED
:LQGSRZHUPD\EHWKHDQVZHUWRPXFKRIWRGD\³V
HQHUJ\GHPDQG%XWPDLQWHQDQFHVHUYLFHDQGRSHUDWLRQ
RIZLQGWXUELQHVDUHFRVWO\DQGFRPSOH[1RWRQO\DUH
WKH\KLJKXSLQWKHDLUWKHLUORFDWLRQVDUHRIWHQUHPRWH
6RPHDUHHYHQORFDWHGRIIVKRUH
7RVLPSOLI\OLIHIRUZLQGIDUPRZQHUVDQGRSHUDWRUV
ZHRIIHUDQDUUD\RIVROXWLRQVVXFKDV6.):LQG&RQ
8VLQJZLUHOHVVWHFKQRORJ\LWHQDEOHVUHPRWHPRQLWRULQJ
RIWKHWXUELQH³VRSHUDWLQJFRQGLWLRQV7KHUHVXOWLVFRVW
HIIHFWLYHPDLQWHQDQFHDQGRSWLPDOVHUYLFHSODQQLQJ
&RPELQHGZLWK6.):LQG/XEDFHQWUDOL]HGDXWRPDWLF
OXEULFDWLRQV\VWHPLWSURYLGHVWKHEHQHILWVRILQFUHDVHG
DYDLODELOLW\DQGVDIHW\
7KHERWWRPOLQHLVDGUDVWLFDOO\UHGXFHGFRVWSHUN:K
SURGXFHG7RILQGRXWPRUHSOHDVHYLVLWVNIFRP
TRAINING CENTRES
0DNLQJFRVWO\PDLQWHQDQFH
EORZDZD\
6.)1DXWLOXV
0DWWKLDV+RIPDQQ6.)
VNIFRP
357
SUPPLIERS
&RPSDFWWXUELQHV
X
PARTNERS
BUSINESSES SELECTED
87 avenue de Aygalades, 13015 Marseille
+33 (0)4 91 61 58 00
+33 (0)4 91 61 58 13
www.snef.fr [email protected]
ACTIVITIES
The SNEF group is a specialist in electrical engineering, industrial processes, communication and safety systems,
climate engineering, and maintenance.
LOCATIONS
SNEF has 62 offices and 29 subsidiaries in France and 13 subsidiaries abroad.
SUPPLIERS
MANUFACTURERS
TRAINING CENTRES
SNEF
S
358
PARTNERS
SUBSIDIARY OF SNEF GROUP-
Shipbuilding and repair
170 rue de l’Elorn, 29200 Brest
+33 (0)2 98 44 72 69
+33 (0)2 98 46 79 75
www.snef.fr [email protected]
ORGANIZATION
SOBEC, a subsidiary of the SNEF group, has a permanent staff of 55 high-qualified employees specialising in naval
trades and in industry. Shipbuilding and repair of all types of vessels.
ACTIVITIES
TRAINING CENTRES
BUSINESSES SELECTED
SOBEC SARL
MANUFACTURERS
• Construction and fairings for port infrastructures, including floating docks, pontoons, walkways, and sea gates.
• Construction and fairings for all types of service vessels including pilot boats, and naval training vessels.
LOCATIONS
359
SUPPLIERS
S
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Import of parts and manufacture of hydraulic cylinders
ZI du Plessis Beucher - BP 52116, 35221 Châteaubourg cedex
+33 (0)2 99 00 84 00
+33 (0)2 99 00 84 09
www.socah.fr [email protected]
ORGANIZATION
Socah Division Hydraulique was founded in 1993 and today has 54 employees. Its head office is located in Châteaubourg,
near Rennes in France. It also has two other sites: a sales office in Ancenis (Loire-Atlantique) and a production plant
in Vinay (Isère) manufacturing Luce Hydro cylinders. In 2008, the company’s turnover was up by 25% at €12 million.
ACTIVITIES
Socah Hydraulique’s main areas of speciality are agriculture, vehicle bodywork, and manufacturing. Its three primary
trades are: importing parts, designing and building hydro-electric power stations, and manufacturing hydraulic cylinders
under the brand name Luce Hydro.
It has one of the largest stocks in the industry (over €3 million worth) to ensure excellent responsiveness.
In January 2008, Socah Hydraulique bought back CHS (Composant Hydraulique Service), allowing the company to
offer a complete line of components.
LOCATIONS
Châteaubourg in Brittany, Ancenis in Pays de la Loire, and Vinay in Rhône-Alpes.
SUPPLIERS
MANUFACTURERS
SOCAH DIVISION HYDRAULIQUE
S
360
PARTNERS
Port operations and services for goods and ships
Rue Des Morées, 44550 Montoir-de-Bretagne
+33 (0)2 40 90 41 42
+33 (0)2 40 90 25 37
www.sogebras.com [email protected]
ORGANIZATION
Sogebras is a subsidiary of the Sogena and Maritime Kuhn groups. Together, the two groups a network of 16 agencies
in all the major French ports and employ 600 people. Sogebras’s main activities are port operations and services for
goods and ships. It also specialises in the transport and handling of heavy, bulky items.
ACTIVITIES
Liner agency, ship agency, stevedoring, storage, forwarding, and customs.
TRAINING CENTRES
BUSINESSES SELECTED
SOGEBRAS
MANUFACTURERS
LOCATIONS
361
SUPPLIERS
Pays de la Loire, France (Maritime Kuhn and Sogena).
S
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Lifting, handling and industrial transfers
ZAC du Moulin Lamblin, 248 rue du Général de Gaulle,
59320 Hallennes-lez-Haubourdin
+33 (0)3 20 50 71 00
+33 (0)3 20 50 83 75
[email protected]
ORGANIZATION
Soliman has 50 technicians who are CACES-certified (safe driving aptitude certificate). They receive continual training
and are educated in safety awareness.
Soliman operates in a number of sectors, including industry, the construction trade, and civil works.
ACTIVITIES
Three sectors of activity: lifting, assembly/handling/industrial transfers, and leasing of equipment.
The company owns 40 of the latest telescopic cranes, 35 to 400 tonnes.
It recently created a new department for lattice boom crawler cranes.
LOCATIONS
Nord-Pas de Calais.
SUPPLIERS
MANUFACTURERS
SOLIMAN LEVAGE
S
362
PARTNERS
Harsh environment connector
RD 323, 72470 Champagné
+33 (0)2 43 54 35 14
www.souriau.com [email protected]
ORGANIZATION
SAS
ACTIVITIES
• Engineering & manufacturer of specific connectors for harsh environement including marine & offshore application
• Machining, plating, plastic injection & assembly
• Certified laboratory for electrical and environmental test
• Harnessing & overmoulding
• Full knowledge on optical technologies, Ethernet, low and high elctrical signal
LOCATIONS
363
SUPPLIERS
Plant close to “Le Mans” : 900 people.
MANUFACTURERS
SUBSIDIARY OF ESTERLINE-
TRAINING CENTRES
BUSINESSES SELECTED
SOURIAU
S
X
SUPPLIERS
364
© AREVA
MANUFACTURERS
TRAINING CENTRES
BUSINESSES SELECTED
PARTNERS
PARTNERS
70 chemin de Payssat - BP 4056, 31029 Toulouse cedex 04
+33 (0)5 61 36 77 77
+33 (0)5 61 36 75 56
www.spie.com [email protected]
ORGANIZATION
A service professional in industry, energy, and communication networks, SPIE works closely with public and private
clients from the industrial and tertiary sectors to design and produce their equipment and assist with operation and
maintenance. SPIE draws on its European network of local companies and its specialised services to develop and
implement quality solutions tailored to its clients’ current and future needs.
ACTIVITIES
Originally a project manager and installer for the construction of hydro-electric power stations, it was only natural that
in 1996 SPIE should begin working in renewable energy (wind, photovoltaic, biomass, and ORC). SPIE has the expertise
necessary to help investors develop their projects. For turnkey contracts, SPIE covers everything from earthwork to
commissioning.
LOCATIONS
365
SUPPLIERS
Midi-Pyrénées.
MANUFACTURERS
New energy
TRAINING CENTRES
BUSINESSES SELECTED
SPIE ENERGIES NOUVELLES
S
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
STE GLOBAL
Supplier and installer of met masts
10 Parc club du Millénaire - 1025 rue Henri Becquerel, 34000 Montpellier
+33 (0)4 67 20 40 50
www.ste-global.com [email protected]
[email protected]
ORGANIZATION
STE GLOBAL has its head office in Villanueva de Gallego in the province of Zaragoza in Spain, at the foot of the Pyrénées
mountain range, two hours from the French city of Pau. Since 2003, STE GLOBAL has had a satellite office in Montpellier
which has always been the company’s showcase and contact point for its French clients. In 2013, the company opened
a sales branch in Dakar, Senegal, for its new area of activity: providing and installing telecommunications aerials.
The goods for meteorological masts and the teams of technicians dedicated to them are physically located in Villanueva
de Gallego. Operations are controlled and directed from its head office. Its warehouse is used for the new equipment
for the installations and for temporary storage for some of its clients whilst seeking a new site for reassembly.
SUPPLIERS
MANUFACTURERS
ACTIVITIES
S
STE GLOBAL specialises in wind measurement. Its main area of activity is the supply and installation of meteorological
masts and measuring equipment. It provides a wide range of services, including preventive and corrective maintenance,
solutions to communication problems and electrical supply problems for heated equipment, programming of aircraft
warning lights in the data logger, replacing sensors that are broken or need recalibration, supplying and installing met
masts that are equipped and installed in accordance with IEC norms, dismantling and storage of met masts, technical
assistance, communications testing, and data downloading.
Its second area is telecommunications. STE GLOBAL opened a sales office in Dakar to expand its knowledge of metal
aerials in the growing telecommunications market. STE GLOBAL SENEGAL offers a range of metal antenna suited
to telephone, radio, and television antenna and equipment, (relay antenna, Yagi antenna and parabolic antenna).
STE GLOBAL employees travel regularly in France, Spain, and Belgium. Occasionally, they perform installation and
maintenance in Eastern Europe, North Africa, the Middle East, Mexico, Jordan, and Senegal. The company has its
own in-house installation team with extensive experience in installing, lifting, disassembling, and maintaining guyed,
self-supporting, and tubular masts. STE GLOBAL also provides and installs all equipment necessary for meteorological
measurements, including data loggers, wind gauges, weathervanes, and other sensors of all brands.
New products: LT47 guyed lattice masts, HD60 super-reinforced guyed lattice masts, self-supporting masts: new,
effective, profitable solutions. STE GLOBAL can work on several models of mast as it has the tools to disassemble or
install several of the most well-known mast models in Europe.
LOCATIONS
France, Spain, Senegal.
366
SUPPLIERS
367
X
MANUFACTURERS
TRAINING CENTRES
BUSINESSES SELECTED
PARTNERS
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
STX FRANCE ENERGIES MARINES
Design and manufacture of foundations for offshore wind turbines, electrical
substations, and specialised ships
Avenue Bourdelle - BP 90180, 44613 Saint-Nazaire cedex
+33 (0)2 51 10 90 12
+33 (0)2 51 10 48 71
www.stxeurope-offshore-energy.com [email protected]
ORGANIZATION
Organisation dedicated to marine energy, located at the former shipyard Chantier de l’Atlantique in Saint-Nazaire.
ACTIVITIES
Studies and manufacture of foundations for offshore wind turbines, electrical substations, and specialised ships;
development of concepts and manufacture of prototypes.
Services include:
• Turnkey contracts
• Engineering: basic and detailed design
• Manufacturing
• R&D.
LOCATIONS
SUPPLIERS
Pays de la Loire.
S
368
PARTNERS
89 avenue de la Grande Armée, 75116 Paris
+33 (0)1 47 78 25 53
[email protected]
ORGANIZATION
Technip is a world leader in project management, engineering, and construction for the energy industry. With sites in
48 countries on every continent, Technip has offices in Paris (head office), Lyon, and Marseille.
ACTIVITIES
From the deepest subsea developments to the largest, most complex onshore and offshore infrastructure, Technip’s
30,000 employees provide the best, most innovative solutions and technology to face the world’s energy challenges.
Technip owns cutting-edge, industrial infrastructure and a fleet of specialised ships for pipe installation and underwater
construction. As a major designer and provider of comprehensive energy solutions,Technip has delved into the renewable
energy sector, focusing on biofuels, solar and marine energy, and the capture and storage of carbon and geothermal
energy. In 2011, Technip expanded into offshore wind energy and created Technip Offshore Wind, a division dedicated
entirely to the construction and installation of European offshore wind farms. In France, Technip, along with Iberdrola,
Eole-RES, and Neoen Marine, was one of the winners of the government project to develop, build, and operate a wind
farm on the Saint-Brieuc bay. The farm will consist of 100 wind turbines and cover 80 km2.
LOCATIONS
MANUFACTURERS
Construction and installation of offshore structures
TRAINING CENTRES
BUSINESSES SELECTED
TECHNIP
369
SUPPLIERS
Île-de-France.
T
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
TEXSYS
Automation, SCADA, System Engineering
14 avenue de l’Europe, 31520 Ramonville-Saint-Agne
+33 (0)9 52 22 40 09
+33 (0)9 57 22 40 09
www.texsys.fr [email protected]
ORGANIZATION
TEXSYS is a SME specialised in the study, development and supply of automation and SCADA systems for renewable
electricity production : wind, solar, hydro, wave and tidal power.
ACTIVITIES
TEXSYS provides its system named ACTEM to wind energy producers, on wind farms either under construction or
already in operations.
This system is a full SCADA system which enables the owner to monitor in real-time the wind turbines and in the long
term to follow-up their production and performances.
Fitted also for maintenance, it allows the operators to react quickly and to minimize the unavailability of the machines.
TEXSYS also develops automation systems for managing wind farms production in conformity with the DEIE rules
imposed by ERDF.
Besides, we support our clients to define and develop with them any automation or instrumentation solution for
specific needs.
LOCATIONS
SUPPLIERS
We are implanted in Toulouse area in the Midi-Pyrénées region and we are providing our systems in wind farms
located in France or in Europe.
T
370
PARTNERS
+33 (0)3 87 38 41 41
[email protected]
ORGANIZATION
A subsidiary of the Germany group SAG, the Thepault group specialises in the construction of high-voltage and medium
voltage electrical infrastructure (overhead and underground lines and transformer stations).
The Thepault group draws on the expertise of its various subsidiaries allowing it to cover every stage of network
construction from the project phase right up to delivery of the equipment.
ACTIVITIES
The Thepault group is qualified to undertake framework contracts with some of France’s biggest prime contractors in
electricity (RTE and ERDF) and telecommunications (France Télécom), and works with private, institutional, and local
authority clients as well.
The group’s trades and skills include:
• HV, MV and LV overhead networks: engineering, foundations, assembly and lifting of supports, cable stringing,
removal and dismantlement
• Transformer substations: technical and administrative studies, civil engineering, substation construction, and
connection to the grid
• Underground networks: burying of HV, MV and LV electrical networks, telecommunications and television networks,
connections, temporary connections, junction rooms, laying of networks in tunnels and confined spaces
• Illumination and outdoor lighting: roadways, open spaces, sporting arenas, monuments, and civil engineering structures
• Special construction: mechanised laying of networks, trenching and micro-trenching, directional drilling and boring
• Alternative energy and sustainable development (wind, photovoltaic, biomass): pre-project tasks and administrative
applications, access studies, burying of networks and laying of underground connections, connections to transformers,
construction of delivery substations
• Engineering offices: studies of overhead, underground networks and transformer substations, ground surveys,
applications for construction and easement permits and right-of-way agreements
• Environmental studies: feasibility studies (overhead and underground electrical lines, gas pipelines, roadway
projects, etc.), impact studies, ensuring correctness of urban planning documents and administrative applications
(construction permits, consulting, etc.)
LOCATIONS
Lorraine. National coverage.
371
MANUFACTURERS
45 route de Metz, 57130 Jouy-aux-Arches
+33 (0)3 87 38 40 18 www.thepault.fr
Electrical engineering, foundations, and earthworks
SUPPLIERS
SUBSIDIARY OF SAG-
TRAINING CENTRES
BUSINESSES SELECTED
THEPAULT
T
PARTNERS
BUSINESSES SELECTED
TPL INDUSTRIES
Treatment of metal surfaces
ZA Auralis - La Maucarrière, 79600 Tessonnière
+33 (0)5 49 64 42 49
+33 (0)5 49 64 42 50
[email protected]
SUPPLIERS
MANUFACTURERS
TRAINING CENTRES
ORGANIZATION
T
TPL INDUSTRIES specialises in surface treatments. It has an industrial clientele, whose products can be found in over
80 countries worldwide in a wide range sectors, such as wind power (wind turbine ball bearings, structures), airports
(aircraft tugs, bag carts, stairs, and miscellaneous handling equipment), boilermaking (vats, pipes, skids, etc.), handling
(bridge cranes, scissor lifts, davit arms, etc.).
TPL INDUSTRIES has three workshops with a production area of 5,000 m2 featuring handling and treatment equipment.
In 2008, the company had around €4 million in turnover and a staff of 35 employees.
TPL INDUSTRIES offers a comprehensive line of services to help clients manage their flow. Services include picking up
parts from clients’ sites, storing products before and after treatment, and delivery. TPL INDUSTRIES also has vehicles
to do rounds to customers’ sites and can organise special transport on demand.
ACTIVITIES
TPL INDUSTRIES specialises in shot-peening, sandblasting (corundum and angular grit), metallisation, surface preparation
(sanding, filling), and applying liquid paint for corrosion protection.
TPL works hard to provide quality services and satisfy its clients by performing stringent inspections during production
(verifying surface conditions, measuring thickness, using gloss metres, and performing pull-out tests) and by training
its employees. Some of its operators are ACQPA-certified and work with OHGPI benchmarks.
TPL INDUSTRIES provides guidance and advice for anti-corrosion systems, developing an ACQPA-certified single-coat
to four-coat system to provide the solution to meet clients’ needs. Certified operators use complex systems that
guarantee treatments will last for years.
TPL INDUSTRIES performs treatments on carbon steel, galvanisation, aluminium, and stainless steel. It also applies
all types of liquid paints, including glycerophthalate paint, zinc-based primers, solvent-free and food-grade epoxy,
and polyurethane.
LOCATIONS
Head office in Poitou-Charentes.
Geographical coverage throughout France.
Workshops in Tessonnière, Louin, and Châtillon-sur-Thouet.
372
PARTNERS
Manufacture of composite RTM parts
ZI Vallée du Bois - BP 44, 62450 Bapaume
+33 (0)3 21 58 92 55
+33 (0)3 21 48 07 88
www.uniject.fr [email protected]
ORGANIZATION
Small business with 40 employees specialising in polyester and phenolic resin injection for the manufacture of largescale single skin or sandwich parts. The company works primarily in industrial bodywork, manufacturing insulated
doors for refrigerated lorries and semi-trailers, and formed parts.
ACTIVITIES
Testing for manufacture of small blades for prototypes.
TRAINING CENTRES
BUSINESSES SELECTED
UNIJECT
MANUFACTURERS
LOCATIONS
373
SUPPLIERS
Nord-Pas de Calais.
U
PARTNERS
BUSINESSES SELECTED
VALEOL
SUBSIDIARY OF VALOREM-
Facilities Management, Industry and R&D programs in wind energy
213 Parc de l’Intelligence Environnementale - Cours Victor Hugo,
33323 Bègles cedex
SUPPLIERS
MANUFACTURERS
TRAINING CENTRES
+33 (0)5 56 49 28 58
+33 (0)5 56 49 24 56
www.valeol.fr [email protected]
V
ORGANIZATION
SAS. Staff: 8 EFT
ACTIVITIES
Subsidiary at 100% of VALOREM Group, Green Energy Productor, VALEOL brings technical and industrial expertise to
develop and to implement VALOREM R&D programs.
Thanks to its Know-How and skills of its engineers and Ph.Doctors, VALEOL takes profit of its direct contact with wind
market to design and realize true applications and innovative solutions from patent to commissioning.
Nowadays, VALEOL is involved in 3 european commission founded projects and 7 national founded projects regarding
issues in Materials, Grids, Operation&Maintenance, in both On and Offshore, sharing its works with Large Companies
and 1st ranking Universities Labs.
VALEOL also provides Transportation, Mecanical Completion, Erection and Commissioning of wind turbines for Promotors,
local Utilities and turbine Manufacturers, french or foreigners.
This expertise brought VALEOL to offer services to customers or to follow them abroad in North and West Africa, Central
America, Scandinavia and Eastern Europe.
LOCATIONS
Amiens, Rouen, Nantes, Bordeaux Bègles, Carcassonne.
374
PARTNERS
Espace Champlain, 59 rue Desseaux, 76100 Rouen
+33 (0)2 35 12 29 50
www.valrea.fr [email protected]
ORGANIZATION
VALREA, a subsidiary of the VALOREM group, is specialised in project engineering, project management, assistance to
project owners and consulting for the construction of wind farms and biogas and photovoltaic power plants.
In 2010, the company had 15 employees based in Rouen and Bordeaux.
With over 380 MW under its belt since 2007, VALREA has supervised over 34 construction sites in France for a many
clients, including RWE, E.ON/Endesa, Eolfi/Veolia, VOLTALIA, RENERCO, TPF, Iberdrola, VALOREM, VIVAL ENERGIES, BL
FINANCE, RF Invest, and more.
ACTIVITIES
VALREA performs all tasks for the project management of wind farm constructions, providing pre-project and project
studies, assistance in awarding construction contracts, execution studies, approval, supervision of construction work,
construction site scheduling/coordination/management, and assistance to project owner for acceptance.
Working closely with clients, VALREA helps make projects a reality:
• VALREA stays with project owners through all the construction phases to coordinate development and operation,
from obtaining construction permits to commissioning, acceptance and final acceptance.
• VALREA provides advice and helps clients make construction choices, optimise projects, choose vendors, carry out
administrative procedures, and manage risk
• VALREA is regularly present at construction sites to structure, plan, coordinate, and organise the worksite to meet
deadlines, budgets, and quality, safety, and environmental requirements
• VALREA helps clients obtain approvals and contracts for power grid and telecoms connections and handles the
local and administrative tasks necessary to make your project successful.
Backed by its extensive experience, VALREA also offers more specific missions involving assistance to project owners,
auditing services in particular fields related to connection or construction.
It is an expert in all areas of infrastructure construction and project engineering in France and abroad.
LOCATIONS
MANUFACTURERS
Engineering, project management and assistance to project owners
SUBSIDIARY OF VALOREM-
TRAINING CENTRES
BUSINESSES SELECTED
VALREA
375
SUPPLIERS
Aquitaine and Upper Normandy.
V
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
Manufacturer of lifting and handling equipment
2 boulevard de l’Industrie - BP 20059, 28509 Vernouillet cedex
+33 (0)2 37 38 95 95
+33 (0)2 37 38 95 99
www.verlinde.fr [email protected]
ORGANIZATION
Founded in 1858, Verlinde supplied the naval and engineering industries with a revolutionary device: the wormscrew
hoist. In 1918, when electricity was making its debut, Verlinde was the first manufacturer in France to design and sell
winches and hoists.
ACTIVITIES
Verlinde is France’s number one manufacturer of lifting and handling equipment, offering ranges of equipment
specifically made for the wind power industry (electric chain hoists and electric winches for wind turbines).
LOCATIONS
Centre.
Offices worldwide.
SUPPLIERS
MANUFACTURERS
VERLINDE
V
376
PARTNERS
Power transmission, drive and control technology
21 boulevard Champy Richardets, 93166 Noisy-le-Grand
+33 (0)1 48 15 69 38
+33 (0)1 48 15 69 30
www.voith.fr [email protected]
ORGANIZATION
Voith Turbo, specialising in heavy machinery, was founded in Germany by a craftsman in 1860. Today, the Voith
group is present in around 40 countries on five continents. Through various industrial companies and commercial
subsidiaries, Voith is a leader in most of its sectors. In 2008-09, the company achieved a turnover of €5.1 billion and
employed 39,330 people.
Voith’s products include automatic gearboxes, hydrodynamic transmissions, reduction gears, fluid couplings, universal
drives, and gearboxes.
ACTIVITIES
In the wind power industry, Voith’s WinDrive is a variable hydromechanical gearbox. Its innovative technology drives
generators at a constant given speed, despite large variations in the turbine’s rotor speed. This makes it possible to
use synchronous generators, which are known for their reliability and can deliver MV currents.
The WinDrive is composed of an epicyclic gearbox and a hydrokinetic torque converter working in parallel.
The main components of the wind turbine are thus, in the direction of energy transmission: the wind turbine’s main
rotor, the main shaft, the main gearbox, the WinDrive variable gearbox, and the generator (no power electronics). The
WinDrive can transfer up to 8 MW of power.
Head office in Île-de-France.
377
SUPPLIERS
LOCATIONS
MANUFACTURERS
SUBSIDIARY OF VOITH TURBO GMBH & CO. KG-
TRAINING CENTRES
BUSINESSES SELECTED
VOITH TURBO
V
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
WESERWIND
European specialist in foundations for offshore wind turbines
Riedemannstraße 1, D-27572 Bremerhaven
+49 04 71 8 09 31 0
www.weserwind.de [email protected]
ORGANIZATION
Founded in 2002, WeserWind has a staff of over 500 employees and specialises in complex steel structures for
offshore wind farms. With over 10 years of experience, 100 tripods and 5 substations built, and major R&D, WeserWind
is an acknowledged specialist in the offshore wind energy market. Located in Bremerhaven, the European hub for
the offshore wind power industry, we also offer storage capacities for up to 60 foundations, to help you optimise your
installation strategies.
MANUFACTURERS
ACTIVITIES
• Foundation production (tripods, jackets, transition pieces). Thanks to its new Am Lunedeich production facilities,
WeserWind can produce almost any size! The largest foundations on the market were produced by WeserWind.
• Electric substation (foundation and topside). With its long experience, WeserWind is ready to face any challenge.
These two products are available in production only, or in EPC.
In association with these products, WeserWind offers O&M services to ensure the parts continue to function properly.
LOCATIONS
SUPPLIERS
Germany.
W
378
PARTNERS
Products, systems and services for wind turbine operation and maintenance
Aéroparc A13Bis - 12 rue de Caulet, 31300 Toulouse
+33 (0)5 34 51 58 16
+33 (0)9 58 67 21 60
www.wind-ds.com [email protected]
ORGANIZATION
Wind Direct Services was founded in early 2009 to provide technical services and solutions to wind power players,
including operators, maintenance firms and builders of wind turbines.
Our products, services, and solutions are the culmination of many years of experience in the sector and provide
outstanding cost-effectiveness to our partners and clients.
We are constantly striving to improve our services and solutions to make wind energy more competitive.
Our experience, quality of service, responsiveness, competitiveness, and professionalism guarantee your satisfaction.
TRAINING CENTRES
BUSINESSES SELECTED
WIND DIRECT SERVICES
ACTIVITIES
LOCATIONS
Midi-Pyrénées, Toulouse.
379
SUPPLIERS
MANUFACTURERS
Services:
• Installation of additional equipment, vibration analysis systems (CMS), and particle counting
• Technical inspections (nacelles, blades, rotors, masts, weathervanes, etc.)
• Performance monitoring and wind farm operation
• Measurements and non-destructive inspections (laser alignment, endoscopy, thermal cameras, etc.)
• Installation and replacement of aircraft warning lights
Distribution and hiring out:
• Specific tools (wrenches, hydraulic cylinders)
• Measuring devices
• Devices for non-destructive inspections
Distribution:
• Consumables
• Spare parts
• Personal protective equipment
W
PARTNERS
BUSINESSES SELECTED
TRAINING CENTRES
MANUFACTURERS
SUPPLIERS
W
WIND PROSPECT
Technical assessment, operation and construction
22 rue de Palestro, 75002 Paris
+33 (0) 175 770 680
www.windprospect.com [email protected]
ORGANIZATION
Leading service provider, Wind Prospect is an independent group of technical experts at the investors’ service.
Since 1995, Wind Prospect is a reference platform delivering audit and technical advisory, asset management, technical
inspections and construction to the renewable industry (wind, solar, hydro).
Wind Prospect has been active in France since 2007 through 6 regional offices located at the nearest of sites.
MANAGEMENT:
• French Director: Barthélémy Rouer
• Group Director: Euan Cameron
STAFF:
• France: 25 staff
• Wind Prospect Group: 200 staff
ACTIVITIES
• Audit & Advisory: On behalf of buyers, lenders or sellers, Wind Prospect has conducted audits on more than 35 GW
to date. Wind Prospect identifies the risk profile of a project from the technical, administrative and economical points
of view and advocates for the interests of its clients during negotiation phases.
• Asset Management: As a one-stop boutique for third party owners, Wind Prospect takes care of the whole administrative
and technical management. Beginning 2014, Wind Prospect operates an aggregated capacity of 850+ MW.
• Tests & Measurements – Construction: Our experts carry out more than 500 technical inspections each year. During
construction phase Wind Prospect issues calls for tenders, negotiates contracts, monitors construction works and
commissioning.
LOCATIONS
France: Amiens, Issoudun, Lyon, Nancy, Paris (HQs’), Toulouse.
Worldwide: South Africa, Australia, China, Ireland, Poland, United-Kingdom (HQs’), Turkey.
380
INDEX
ALPHABETICAL INDEX
#
BAUDIN CHATEAUNEUF ………………………… 159
3E FRANCE …………………………………… 130
BAYWA R.E. FRANCE SAS ………………………… 77
8.2 FRANCE …………………………………… 131
BECK CRESPEL ………………………………… 160
BERTHOLD……………………………………… 161
A
BESNÉ MÉCANIQUE DE PRÉCISION ……………… 37
ABB …………………………………………… 132
BEUZIT FRANCOIS SARL ………………………… 162
ACCES DIFFICILES SERVICES …………………… 133
BLP (Bolloré Logistique Portuaire) ……………… 163
ACOEM, 01DB-METRAVIB SAS ………………… 134
BMP …………………………………………… 164
ACROPHOTO …………………………………… 135
BONFIGLIOLI TRANSMISSIONS ………………… 165
ACTEMIUM …………………………………… 136
BOREAS ………………………………………… 79
ACTEMIUM DUNKERQUE ……………………… 137
BOSCH REXROTH ……………………………… 166
AETE ENERGIE …………………………………… 36
BOT FONDERIE ………………………………… 167
AGRAFE ENR …………………………………… 138
AILENERGIE CHAMPAGNE ARDENNE ……………… 76
AINELEC ……………………………………… 139
ALIOS INGENIERIE ……………………………… 140
ALIZEO …………………………………………… 59
ALMEA ………………………………………… 142
ALSTOM ………………………………………… 60
ALTEAD ………………………………………… 143
BOTTE FONDATIONS …………………………… 168
BOTTE SONDAGES ……………………………… 169
BRETAGNE DEVELOPPEMENT INNOVATION ………… 21
BRETAGNE POLE NAVAL …………………………… 22
BRÜEL & KJAER VIBRO ………………………… 170
BUREAU VERITAS ……………………………… 171
BURKERT CONTROMATIC FRANCE ……………… 172
ANDRE LAURENT ……………………………… 144
C
ANTEAGROUP ………………………………… 145
C.E.P.S. (Centre d’Etude et de Pratique de la Survie) 52
ANVIS INDUSTRY ……………………………… 146
APAVE ………………………………………… 147
APPLISURFACES ……………………………… 148
ARCADIS ……………………………………… 150
AREVA - BU OFFSHORE WIND ……………………… 62
AREVA NP - ETABLISSEMENT DE JEUMONT ……… 151
ARTELIA EAU ET ENVIRONNEMENT ……………… 152
ASSISTANCE AERONAUTIQUE ET AEROSPATIALE … 153
ATV …………………………………………… 154
AUTAN ENVIRONNEMENT ……………………… 155
AVENISENSE …………………………………… 156
AYALA ………………………………………… 157
CAHORS DIVISION MOYENNE TENSION ………… 173
CAP INGELEC ………………………………… 174
CAPELLE ……………………………………… 175
CATEXE-CATEOLE ……………………………… 176
CATHIE ASSOCIATES …………………………… 177
CCI LITTORAL NORMAND-PICARD ………………… 24
CEGELEC RENEWABLE ENERGIES ……………… 178
CG SALES NETWORKS FRANCE ………………… 179
CHOMARAT …………………………………… 180
CITA PRODUCTION ……………………………… 181
CLM INDUSTRIE ………………………………… 182
CMD GEARS …………………………………… 183
B
CMI TECH 51 PASTOR ………………………… 184
BATTERIES GLOBAL SERVICES ………………… 158
CMR FRANCE (Contrôle Mesure Regulation) …… 186
381
INDEX
COBHAM SLIPRINGS …………………………… 187
EIFFAGE CONSTRUCTION HAUTE NORMANDIE … 214
COFELY ENDEL ………………………………… 188
EIFFAGE CONSTRUCTION METALLIQUE ………… 215
COFELY INEO…………………………………… 189
ELECTRAWINDS …………………………………… 87
COLAS ………………………………………… 190
EMCC ………………………………………… 216
COMER INDUSTRIES …………………………… 191
ENCIS ÉNERGIES VERTES ……………………… 217
COMPAGNIE NATIONALE DU RHÔNE (CNR) ……… 80
ENCIS WIND …………………………………… 218
CORDIAL ……………………………………… 192
ENEL GREEN POWER FRANCE …………………… 88
CORDM ………………………………………… 193
ENERCON GMBH ………………………………… 66
CTE WIND CIVIL ENGINEERING ………………… 194
ENERPAC ……………………………………… 219
D
ENERTRAG ……………………………………… 89
ENERYO ………………………………………… 90
D2M ENGINEERING …………………………… 195
EOLE AVENIR DEVELOPPEMENT …………………… 91
DAHER INTERNATIONAL ………………………… 196
EOLE SYSTEM ………………………………… 220
DCNS ………………………………………… 197
EOLECLEAN …………………………………… 221
DDIS ……………………………………………… 65
EOLFI …………………………………………… 92
DEC+ ………………………………………… 198
EOLISSIMA ……………………………………… 26
DEF …………………………………………… 199
EOLTECH ……………………………………… 222
DEKRA INDUSTRIAL …………………………… 200
EOLYS RESSOURCES ET ENERGIES ……………… 223
DELTABOX-SERA………………………………… 201
EPSILON COMPOSITE ………………………… 224
DEUBLIN SARL ………………………………… 202
EPURON SAS ……………………………………… 93
DEWI FRANCE ………………………………… 203
ERNEO ………………………………………… 225
DIALOG …………………………………………… 38
ETAIR MEDITERRANEE ………………………… 226
DINALEC SCOP SA ……………………………… 204
ETHM ………………………………………… 227
DM TABLEAUX ………………………………… 205
ETV …………………………………………… 228
DNV GL (ex GL GARRAD HASSAN France) ……… 206
EUROCAPE NEW ENERGY FRANCE ………………… 94
DONG ENERGY …………………………………… 82
EUROPE TECHNOLOGIES ……………………… 229
DOUCE-HYDRO SAS …………………………… 207
DUFF NORTON EUROPE ………………………… 208
F
DUFOUR ……………………………………… 209
FALCK ENERGIES RENOUVELABLES ……………… 95
DUNKERQUE PROMOTION ………………………… 25
FAUCHE AUTOMATION AQUITAINE ……………… 230
E
FAVIER TPL……………………………………… 231
FDKOMPOSITES ………………………………… 232
E.ON ……………………………………………… 83
FERRY CAPITAIN …………………………………… 39
EADS ASTRIUM ………………………………… 210
FIXATOR…………………………………………… 40
ECL …………………………………………… 211
FMGC …………………………………………… 41
ECO DELTA ……………………………………… 84
FONDASOL …………………………………… 233
ECOTERA DEVELOPPEMENT SAS ………………… 85
FONDASOLUTIONS …………………………… 234
EDF EN SERVICES ……………………………… 212
FONDEOLE …………………………………… 235
EDF ENERGIES NOUVELLES ……………………… 86
FONDERIE HELLIN ……………………………… 236
EG SOL ………………………………………… 213
FORGITAL DEMBIERMONT S.A.S ………………… 237
382
FOSELEV ……………………………………… 238
ITRON ………………………………………… 266
FOURÉ LAGADEC SARL …………………………… 42
J
FRANCEOLE …………………………………… 239
FRANKI FONDATION …………………………… 240
JADE …………………………………………… 267
JAMES WALKER ………………………………… 268
G
JEFMAG ……………………………………… 269
G-TEC SA ……………………………………… 241
JEUMONT ELECTRIC SAS ……………………… 270
GAMESA EOLICA ………………………………… 67
JIFMAR OFFSHORE SERVICES SAS ……………… 271
GANTOIS SA …………………………………… 242
JMA ENERGIES ………………………………… 105
GDF SUEZ ………………………………………… 96
JP ENERGIE ENVIRONNEMENT ………………… 106
GE ENERGY POWER CONVERSION ……………… 243
K
GE WIND ENERGY ………………………………… 68
GEG ENERGIES NOUVELLES ET RENOUVELABLES … 99
GEOLIS ………………………………………… 100
KEOPS AUTOMATION …………………………… 272
KTR FRANCE …………………………………… 273
GEOTEC ……………………………………… 244
L
GEOTECH INDUSTRIES ………………………… 245
LA COMPAGNIE DU VENT ……………………… 107
GINGER CEBTP ………………………………… 246
LA FONTE ARDENNAISE ………………………… 274
GKN STROMAG FRANCE - SIME BRAKES ………… 247
LE MANS WIND CLUSTER ………………………… 27
GLOBAL WIND POWER FRANCE ………………… 101
LEROY-SOMER ………………………………… 275
GROUPE INICIA - FLUIDEXPERT / NOVIUM ……… 248
LINAK FRANCE ………………………………… 276
GROUPE PRESTIA ……………………………… 249
LOUIS DREYFUS ARMATEURS …………………… 277
GUERTON ……………………………………… 250
LP RAOUL MORTIER (Lycée des métiers des énergies et
H
des services aux entreprises) …………………… 53
LUFKIN FRANCE ………………………………… 278
HAWE-OTELEC SAS …………………………… 252
HUTCHINSON ………………………………… 253
LYCEE DHUODA …………………………………… 54
LYCEE FRANCOIS BAZIN …………………………… 55
HYDAC ………………………………………… 254
M
HYDRATIGHT SAS ……………………………… 256
HYDROGEOTECHNIQUE ………………………… 257
MADEP ………………………………………… 279
HYSEO ………………………………………… 102
MAÏA EOLIS …………………………………… 108
HYTORC ……………………………………… 258
MANCHE MARINE INDUSTRIE …………………… 280
MANOFFSHORE ………………………………… 281
I
MANOIR INDUSTRIES …………………………… 282
IDEA LOGISTIQUE ……………………………… 259
MARC S.A.
IDEOL ………………………………………… 260
MASER ENGINEERING ………………………… 284
IDEX SAS ……………………………………… 103
MCCF ………………………………………… 285
IFM ELECTRONIC ……………………………… 261
MEDIACO LEVAGE ……………………………… 287
IN VIVO ………………………………………… 263
MENARD ……………………………………… 288
INGETEAM SAS ………………………………… 264
MERCERON TP ………………………………… 291
INITIATIVES & ENERGIES LOCALES ……………… 104
MERSEN ……………………………………… 292
…………………………………… 283
383
INDEX
METAL DEPLOYE RESISTOR……………………… 294
PAUMELLE ………………………………………… 43
METEODYN …………………………………… 295
PICARDY - SOMME WIND POWER NETWORK ……… 30
MICEL ………………………………………… 296
PIRIOU ………………………………………… 322
MOOG ………………………………………… 297
PLASTIMA COMPOSITES…………………………… 44
MOTEURS J.M. ………………………………… 298
PLASTINOV SNE………………………………… 323
MSB …………………………………………… 299
PÔLE MER MEDITERRANÉE ……………………… 31
N
PROMARITIME INTERNATIONAL ………………… 324
PROMIC ……………………………………… 325
NASS&WIND INDUSTRIE ……………………… 300
PRONAL SAS ……………………………………… 45
NASS&WIND SAS ……………………………… 109
NATURAL POWER ……………………………… 301
NAVALU ………………………………………… 302
NAVTIS ………………………………………… 303
Q
QUADRAN (JMB énergie + Aérowatt)
………… 113
R
NENUPHAR …………………………………… 304
NEOEN ………………………………………… 110
REETEC FRANCE ……………………………… 326
NEOPOLIA EMR …………………………………… 28
RÉGION CHAMPAGNE-ARDENNE ………………… 32
NET WIND ……………………………………… 305
REPACK-S ……………………………………… 327
NEXANS ……………………………………… 306
REVEL ………………………………………… 328
NHEOLIS ……………………………………… 307
ROLLIX - DEFONTAINE ………………………… 329
NICOLAS ……………………………………… 308
ROXTEC FRANCE SAS…………………………… 330
NIDAPLAST COMPOSITES ……………………… 309
S
NOMA COMPOSITES SAS ……………………… 310
NORDEX FRANCE ………………………………… 69
NOUVERGIES ………………………………… 111
NOVEOL ……………………………………… 311
NTN-SNR ROULEMENTS ………………………… 312
S.O.M. (Services Organisation Méthodes) ……… 331
SAFOR ………………………………………… 332
SAFT …………………………………………… 333
SAINT-LAURENT ENERGIE ……………………… 114
SAIPEM ………………………………………… 334
O
SAMEOLE ……………………………………… 115
OBSTA ………………………………………… 313
SARENS FRANCE ……………………………… 335
OILGEAR TOWLER ……………………………… 314
SBS FORGE …………………………………… 336
ONEM (Ouest Normandie Energie Marine) ……… 29
SCAIME SAS …………………………………… 337
ORATECH INNOVATION ………………………… 315
SCHAEFFLER FRANCE SAS ……………………… 338
ORMAZABAL - ORMAPOST ……………………… 316
SCHNEIDER ELECTRIC FRANCE ………………… 340
OSEAN ………………………………………… 317
SCOTT BADER SA ……………………………… 341
OSTWIND INTERNATIONAL ……………………… 112
SDI (Société de Dragage International) ………… 344
OT ENGINEERING ……………………………… 318
SDMO ………………………………………… 343
SEL ENERBETON ……………………………… 346
P
SEMA (Société d’Entreprise Metallurgique d’Armor) 347
PALFINGER FRANCE …………………………… 319
SEMANTIC TS…………………………………… 348
PARKER HANNIFIN FRANCE SAS ………………… 320
SENVION FRANCE SAS …………………………… 70
PARKER OLAER ………………………………… 321
SERGIES ……………………………………… 116
384
SERHY ………………………………………… 349
VENDÉE ENERGIE ……………………………… 122
SETEC ENERGY SOLUTIONS …………………… 350
VENT D’EST SAS ……………………………… 123
SGS QUALITEST INDUSTRIE …………………… 351
VENTS D’OC ENERGIES RENOUVELABLES ……… 124
SGURRENERGY ………………………………… 352
VERGNET ………………………………………… 73
SIEMENS WIND POWER …………………………… 71
VERLINDE ……………………………………… 376
SIKA INDUSTRY ………………………………… 353
VESTAS FRANCE ………………………………… 72
SIMRIT ………………………………………… 355
VOITH TURBO…………………………………… 377
SKF IN FRANCE ………………………………… 356
VOL-V SAS……………………………………… 125
SNEF…………………………………………… 358
VOLTALIA ……………………………………… 126
SOBEC SARL …………………………………… 359
W
SOCAH DIVISION HYDRAULIQUE ………………… 360
SOFIVA ENERGIE ……………………………… 118
SOGEBRAS …………………………………… 361
SOLIMAN LEVAGE ……………………………… 362
SOLUTIONS COMPOSITES ………………………… 46
SOURIAU ……………………………………… 363
SPIE ENERGIES NOUVELLES …………………… 365
ST INDUSTRIES …………………………………… 47
WESERWIND …………………………………… 378
WIND DIRECT SERVICES ……………………… 379
WIND FOR FUTURE ……………………………… 34
WIND PROSPECT ……………………………… 380
WINDLAB ………………………………………… 56
WINDVISION …………………………………… 127
WPD OFFSHORE FRANCE ……………………… 128
STATKRAFT FRANCE SAS………………………… 117
STE GLOBAL …………………………………… 366
STO LOGISTIQUE ………………………………… 48
STX FRANCE ENERGIES MARINES ……………… 368
T
TE2M …………………………………………… 49
TECHNIP ……………………………………… 369
TEXSYS ………………………………………… 370
THEOLIA FRANCE ……………………………… 119
THEPAULT ……………………………………… 371
TPL INDUSTRIES ……………………………… 372
U
UBIFRANCE ……………………………………… 33
UNIJECT ……………………………………… 373
UNITE ………………………………………… 120
V
VALEOL ………………………………………… 374
VALREA ………………………………………… 375
VELOCITA ENERGIES …………………………… 121
385
INDEX
INDEX BY SPECIALITY
AIRCRAFT WARNING LIGHTS
DELTABOX-SERA…………………………………
ENCIS WIND ……………………………………
OBSTA …………………………………………
PROMIC ………………………………………
REETEC FRANCE ………………………………
201
218
313
325
326
ASSEMBLY AND MAINTENANCE
AGRAFE ENR …………………………………… 138
ALMEA ………………………………………… 142
ALTEAD ………………………………………… 143
CMI TECH 51 PASTOR ………………………… 184
COFELY ENDEL ………………………………… 188
CORDIAL ……………………………………… 192
EMCC ………………………………………… 216
EOLECLEAN …………………………………… 221
FIXATOR…………………………………………… 40
JADE …………………………………………… 267
LUFKIN FRANCE ………………………………… 278
NET WIND ……………………………………… 305
SAIPEM ………………………………………… 334
SDI (SOCIÉTÉ DE DRAGAGE INTERNATIONAL) …… 344
TEXSYS ………………………………………… 370
BLADES
ATV …………………………………………… 154
386
CHOMARAT ……………………………………
EADS ASTRIUM …………………………………
EPSILON COMPOSITE …………………………
ETAIR MEDITERRANEE …………………………
FDKOMPOSITES …………………………………
PLASTINOV SNE…………………………………
SCOTT BADER SA ………………………………
UNIJECT ………………………………………
180
210
224
226
232
323
341
373
BRAKES
CAST PARTS
BOT FONDERIE ………………………………… 167
DOMESTIC WIND POWER
EOLE SYSTEM …………………………………
EOLYS RESSOURCES ET ENERGIES ………………
NHEOLIS ………………………………………
NOVEOL ………………………………………
220
223
307
311
ELECTRICAL ENGINEERING
ACTEMIUM ……………………………………
ACTEMIUM DUNKERQUE ………………………
BEUZIT FRANCOIS SARL …………………………
CAHORS DIVISION MOYENNE TENSION …………
CAP INGELEC …………………………………
CEGELEC RENEWABLE ENERGIES ………………
COFELY INEO……………………………………
DINALEC SCOP SA ………………………………
DM TABLEAUX …………………………………
FAUCHE AUTOMATION AQUITAINE ………………
FONDEOLE ……………………………………
MADEP …………………………………………
ORMAZABAL - ORMAPOST ………………………
136
137
162
173
174
178
189
204
205
230
235
279
316
OT ENGINEERING ………………………………
SCHNEIDER ELECTRIC FRANCE …………………
SEL ENERBETON ………………………………
SNEF……………………………………………
SPIE ENERGIES NOUVELLES ……………………
THEPAULT ………………………………………
318
340
346
358
365
371
TE2M …………………………………………… 49
TEXSYS ………………………………………… 370
EXPERT ASSESSMENTS
3E FRANCE …………………………………… 130
8.2 FRANCE …………………………………… 131
ELECTRICAL MATERIALS AND COMPONENTS
ABB ……………………………………………
AINELEC ………………………………………
AVENISENSE ……………………………………
BATTERIES GLOBAL SERVICES …………………
CAHORS DIVISION MOYENNE TENSION …………
CG SALES NETWORKS FRANCE …………………
CMR FRANCE (CONTRÔLE MESURE REGULATION)
COBHAM SLIPRINGS ……………………………
DEF ……………………………………………
DEUBLIN SARL …………………………………
ERNEO …………………………………………
FAVIER TPL………………………………………
GE ENERGY POWER CONVERSION ………………
GROUPE INICIA - FLUIDEXPERT / NOVIUM ………
IFM ELECTRONIC ………………………………
INGETEAM SAS …………………………………
ITRON …………………………………………
JEUMONT ELECTRIC SAS ………………………
LEROY-SOMER …………………………………
LINAK FRANCE …………………………………
MADEP …………………………………………
MERSEN ………………………………………
METAL DEPLOYE RESISTOR………………………
MICEL …………………………………………
MOOG …………………………………………
MOTEURS J.M. …………………………………
NEXANS ………………………………………
OILGEAR TOWLER ………………………………
ORMAZABAL - ORMAPOST ………………………
PARKER HANNIFIN FRANCE SAS …………………
SAFT ……………………………………………
SCAIME SAS ……………………………………
SCHNEIDER ELECTRIC FRANCE …………………
SDMO …………………………………………
SOURIAU ……………………………………… 363
132
139
156
158
173
179
186
187
199
202
225
231
243
248
261
264
266
270
275
276
279
292
294
296
297
298
306
314
316
320
333
337
340
343
186
DEWI FRANCE ………………………………… 203
DNV GL (EX GL GARRAD HASSAN FRANCE) …… 206
EOLTECH ……………………………………… 222
G-TEC SA ……………………………………… 241
IN VIVO ………………………………………… 263
NET WIND ……………………………………… 305
OSEAN ………………………………………… 317
SEMANTIC TS…………………………………… 348
SERHY ………………………………………… 349
SGURRENERGY ………………………………… 352
S.O.M. (SERVICES ORGANISATION MÉTHODES) … 331
VALEOL ………………………………………… 374
VALREA ………………………………………… 375
FLANGES AND SLEWING RINGS
CMD GEARS …………………………………… 183
SBS FORGE …………………………………… 336
SKF IN FRANCE ………………………………… 356
387
INDEX
FOUNDATIONS AND EARTHWORKS
ARCADIS ……………………………………… 150
BERTHOLD……………………………………… 161
COFELY INEO…………………………………… 189
COLAS ………………………………………… 190
EG SOL ………………………………………… 213
EMCC ………………………………………… 216
ETV …………………………………………… 228
FMGC …………………………………………… 41
FONDEOLE …………………………………… 235
IDEOL ………………………………………… 260
MARC S.A.……………………………………… 283
MCCF ………………………………………… 285
MENARD ……………………………………… 288
MERCERON TP ………………………………… 291
SAIPEM ………………………………………… 334
THEPAULT ……………………………………… 371
WESERWIND …………………………………… 378
GEOTECHNICAL SURVEYS
ALIOS INGENIERIE ………………………………
ANTEAGROUP …………………………………
ARCADIS ………………………………………
BOTTE SONDAGES ………………………………
CATHIE ASSOCIATES ……………………………
EG SOL …………………………………………
FONDASOL ……………………………………
GEOTEC ………………………………………
GINGER CEBTP …………………………………
G-TEC SA ………………………………………
HYDROGEOTECHNIQUE …………………………
388
140
145
150
169
177
213
233
244
246
241
257
SAFOR ………………………………………… 332
SEMANTIC TS…………………………………… 348
INSPECTION OFFICES
APAVE …………………………………………
BUREAU VERITAS ………………………………
DEKRA INDUSTRIAL ……………………………
SGS QUALITEST INDUSTRIE ……………………
147
171
200
351
MASTS
FRANCEOLE …………………………………… 239
GUERTON ……………………………………… 250
SEMA (SOCIÉTÉ D’ENTREPRISE METALLURGIQUE
D’ARMOR)……………………………………… 347
MECHANICAL PARTS
BECK CRESPEL ………………………………… 160
CLM INDUSTRIE ………………………………… 182
CMD GEARS …………………………………… 183
CORDM ………………………………………… 193
DEC+ ………………………………………… 198
DEUBLIN SARL ………………………………… 202
ECL …………………………………………… 211
ENERPAC ……………………………………… 219
FIXATOR…………………………………………… 40
GANTOIS SA …………………………………… 242
HUTCHINSON ………………………………… 253
HYDAC ………………………………………… 254
HYTORC ……………………………………… 258
JAMES WALKER ………………………………… 268
JEFMAG ……………………………………… 269
KTR FRANCE …………………………………… 273
LINAK FRANCE ………………………………… 276
LUFKIN FRANCE ………………………………… 278
MOOG ………………………………………… 297
MSB …………………………………………… 299
PARKER OLAER ………………………………… 321
PAUMELLE ………………………………………… 43
REPACK-S ……………………………………… 327
SBS FORGE …………………………………… 336
SIKA INDUSTRY ………………………………… 353
SIMRIT ………………………………………… 355
SKF IN FRANCE ………………………………… 356
SOURIAU ……………………………………… 363
ST INDUSTRIES …………………………………… 47
VOITH TURBO…………………………………… 377
NACELLES
BMP …………………………………………… 164
CHOMARAT …………………………………… 180
UNIJECT ……………………………………… 373
OFFSHORE
AETE ENERGIE …………………………………… 36
DCNS ………………………………………… 197
EMCC ………………………………………… 216
ETHM ………………………………………… 227
FMGC …………………………………………… 41
G-TEC SA ……………………………………… 241
IDEOL ………………………………………… 260
IN VIVO ………………………………………… 263
MANOFFSHORE ………………………………… 281
NAVALU ………………………………………… 302
NAVTIS ………………………………………… 303
NENUPHAR …………………………………… 304
OSEAN ………………………………………… 317
PIRIOU ………………………………………… 322
PRONAL SAS ……………………………………… 45
SAIPEM ………………………………………… 334
SEMANTIC TS…………………………………… 348
SOBEC SARL …………………………………… 359
TECHNIP ……………………………………… 369
WESERWIND …………………………………… 378
PARTNERS OF THE WINDUSTRY FRANCE PROJECT
389
INDEX
CCI LITTORAL NORMAND-PICARD …………………
DUNKERQUE PROMOTION …………………………
EOLISSIMA ………………………………………
LE MANS WIND CLUSTER …………………………
NEOPOLIA EMR ……………………………………
ONEM (OUEST NORMANDIE ENERGIE MARINE) ……
PICARDY - SOMME WIND POWER NETWORK ………
PÔLE MER MEDITERRANÉE ………………………
RÉGION CHAMPAGNE-ARDENNE …………………
UBIFRANCE ………………………………………
WIND FOR FUTURE ………………………………
24
25
26
27
28
29
30
31
32
33
34
SPECIAL TRANSPORT, LOGISTICS, HANDLING, AND
HOISTING
ALTEAD ………………………………………… 143
AYALA ………………………………………… 157
BLP (BOLLORÉ LOGISTIQUE PORTUAIRE)………… 163
CAPELLE ……………………………………… 175
DIALOG …………………………………………… 38
DUFOUR ……………………………………… 209
EMCC ………………………………………… 216
FOSELEV ……………………………………… 238
MANOFFSHORE ………………………………… 281
NICOLAS ……………………………………… 308
REVEL ………………………………………… 328
SAIPEM ………………………………………… 334
SOGEBRAS …………………………………… 361
VERLINDE ……………………………………… 376
TRAINING CENTRES
C.E.P.S. (CENTRE D’ETUDE ET DE PRATIQUE DE LA
SURVIE) ………………………………………… 52
390
LP RAOUL MORTIER (LYCÉE DES MÉTIERS DES ÉNERGIES
ET DES SERVICES AUX ENTREPRISES)……………… 53
LYCEE DHUODA …………………………………… 54
WINDLAB ………………………………………… 56
WIND FARM DEVELOPERS
BOREAS ………………………………………… 79
DONG ENERGY …………………………………… 82
ECO DELTA ……………………………………… 84
ENERTRAG ……………………………………… 89
ENERYO ………………………………………… 90
EOLFI …………………………………………… 92
EPURON SAS ……………………………………… 93
GDF SUEZ ………………………………………… 96
GEOLIS ………………………………………… 100
HYSEO ………………………………………… 102
IDEX SAS ……………………………………… 103
JMA ENERGIES ………………………………… 105
MAÏA EOLIS …………………………………… 108
NASS&WIND SAS ……………………………… 109
NEOEN ………………………………………… 110
NOUVERGIES ………………………………… 111
QUADRAN (JMB ÉNERGIE + AÉROWATT) ……… 113
SAINT-LAURENT ÉNERGIE ………………………
SAMEOLE ………………………………………
SERGIES ………………………………………
SOFIVA ENERGIE ………………………………
STATKRAFT FRANCE SAS…………………………
THEOLIA FRANCE ………………………………
UNITE …………………………………………
VELOCITA ENERGIES ……………………………
VENDÉE ENERGIE ………………………………
VENTS D’OC ENERGIES RENOUVELABLES ………
VOLTALIA ………………………………………
VOL-V SAS………………………………………
WINDVISION ……………………………………
WPD OFFSHORE FRANCE ………………………
114
115
116
118
117
119
120
121
122
124
126
125
127
128
WIND FARM OPERATORS
BOREAS ………………………………………… 79
DONG ENERGY …………………………………… 82
ENERTRAG ……………………………………… 89
ENERYO ………………………………………… 90
EOLFI …………………………………………… 92
E.ON ……………………………………………… 83
EPURON SAS ……………………………………… 93
GDF SUEZ ………………………………………… 96
JMA ENERGIES ………………………………… 105
MAÏA EOLIS …………………………………… 108
NASS&WIND SAS ……………………………… 109
NEOEN ………………………………………… 110
NOUVERGIES ………………………………… 111
SAINT-LAURENT ÉNERGIE ……………………… 114
SAMEOLE ……………………………………… 115
SERGIES ……………………………………… 116
UNITE ………………………………………… 120
VENT D’EST SAS ……………………………… 123
VOLTALIA ……………………………………… 126
VOL-V SAS……………………………………… 125
WINDVISION …………………………………… 127
WIND MEASUREMENTS
ACROPHOTO ……………………………………
AUTAN ENVIRONNEMENT ………………………
DEWI FRANCE …………………………………
ENCIS WIND ……………………………………
EOLTECH ………………………………………
METEODYN ……………………………………
STE GLOBAL ……………………………………
135
155
203
218
222
295
366
WIND TURBINE MANUFACTURERS
ALIZEO ……………………………………………
ALSTOM …………………………………………
AREVA - BU OFFSHORE WIND ………………………
DDIS ………………………………………………
ENERCON GMBH …………………………………
GAMESA EOLICA …………………………………
GE WIND ENERGY …………………………………
NORDEX FRANCE …………………………………
SENVION FRANCE SAS ……………………………
SIEMENS WIND POWER ……………………………
VERGNET …………………………………………
VESTAS FRANCE …………………………………
59
60
62
65
66
67
68
69
70
71
73
72
391
INDEX
INDEX BY REGION
Alsace
Brittany
ACTEMIUM …………………………………… 136
ARCADIS ……………………………………… 150
ARCADIS ……………………………………… 150
BATTERIES GLOBAL SERVICES ………………… 158
GINGER CEBTP ………………………………… 246
C.E.P.S. (CENTRE D’ETUDE ET DE PRATIQUE DE LA
SURVIE) ………………………………………… 52
CMD GEARS …………………………………… 183
Aquitaine
CORDIAL ……………………………………… 192
CAP INGELEC ………………………………… 174
EADS ASTRIUM ………………………………… 210
EPSILON COMPOSITE ………………………… 224
DINALEC SCOP SA ……………………………… 204
EG SOL ………………………………………… 213
GANTOIS SA …………………………………… 242
FAUCHE AUTOMATION AQUITAINE ……………… 230
IN VIVO ………………………………………… 263
GANTOIS SA …………………………………… 242
JADE …………………………………………… 267
GINGER CEBTP ………………………………… 246
HYTORC ……………………………………… 258
JMA ENERGIES ………………………………… 105
MENARD ……………………………………… 288
MARC S.A.……………………………………… 283
PLASTINOV SNE………………………………… 323
VALEOL ………………………………………… 374
NASS&WIND SAS ……………………………… 109
VALREA ………………………………………… 375
NAVTIS ………………………………………… 303
Auvergne
FAVIER TPL……………………………………… 231
392
PIRIOU ………………………………………… 322
SDMO ………………………………………… 343
SEMA (SOCIÉTÉ D’ENTREPRISE METALLURGIQUE
D’ARMOR)……………………………………… 347
SKF IN FRANCE ………………………………… 356
SOBEC SARL …………………………………… 359
VERGNET ………………………………………… 73
ST INDUSTRIES …………………………………… 47
VERLINDE ……………………………………… 376
TE2M …………………………………………… 49
VOL-V SAS……………………………………… 125
Burgundy
Champagne-Ardenne
CAP INGELEC ………………………………… 174
CLM INDUSTRIE ………………………………… 182
FONDEOLE …………………………………… 235
CMD GEARS …………………………………… 183
DEC+ ………………………………………… 198
DELTABOX-SERA………………………………… 201
OBSTA ………………………………………… 313
DM TABLEAUX ………………………………… 205
RÉGION CHAMPAGNE-ARDENNE ………………… 32
FRANCEOLE …………………………………… 239
GEOTEC ……………………………………… 244
VENT D’EST SAS ……………………………… 123
WINDVISION …………………………………… 127
METAL DEPLOYE RESISTOR……………………… 294
MSB …………………………………………… 299
DROM
NICOLAS ……………………………………… 308
ALIZEO …………………………………………… 59
ORMAZABAL - ORMAPOST ……………………… 316
ANTEAGROUP ………………………………… 145
REPACK-S ……………………………………… 327
SAFOR ………………………………………… 332
SIMRIT ………………………………………… 355
SKF IN FRANCE ………………………………… 356
WIND FOR FUTURE ……………………………… 34
Foreign stakeholders active in France
DONG ENERGY …………………………………… 82
WESERWIND …………………………………… 378
Centre
AINELEC ……………………………………… 139
Franche-Comté
ALIZEO …………………………………………… 59
CAP INGELEC ………………………………… 174
DEF …………………………………………… 199
GE WIND ENERGY ………………………………… 68
GUERTON ……………………………………… 250
LUFKIN FRANCE ………………………………… 278
393
INDEX
Ile-de-France
ABB …………………………………………… 132
ENERPAC ……………………………………… 219
ENERTRAG ……………………………………… 89
ENERYO ………………………………………… 90
ALSTOM ………………………………………… 60
EOLFI …………………………………………… 92
ANTEAGROUP ………………………………… 145
E.ON ……………………………………………… 83
APAVE ………………………………………… 147
EPURON SAS ……………………………………… 93
ARCADIS ……………………………………… 150
ETHM ………………………………………… 227
FRANCEOLE …………………………………… 239
AYALA ………………………………………… 157
GANTOIS SA …………………………………… 242
GDF SUEZ ………………………………………… 96
GE WIND ENERGY ………………………………… 68
GINGER CEBTP ………………………………… 246
BUREAU VERITAS ……………………………… 171
CAP INGELEC ………………………………… 174
HUTCHINSON ………………………………… 253
HYDROGEOTECHNIQUE ………………………… 257
CMD GEARS …………………………………… 183
COFELY ENDEL ………………………………… 188
IDEX SAS ……………………………………… 103
COFELY INEO…………………………………… 189
COLAS ………………………………………… 190
MADEP ………………………………………… 279
CORDIAL ……………………………………… 192
MCCF ………………………………………… 285
MENARD ……………………………………… 288
DCNS ………………………………………… 197
MERSEN ……………………………………… 292
DEF …………………………………………… 199
MOOG ………………………………………… 297
DEKRA INDUSTRIAL …………………………… 200
NEOEN ………………………………………… 110
DEUBLIN SARL ………………………………… 202
DNV GL (EX GL GARRAD HASSAN FRANCE) …… 206
NOUVERGIES ………………………………… 111
OBSTA ………………………………………… 313
EG SOL ………………………………………… 213
PARKER OLAER ………………………………… 321
394
SAFT …………………………………………… 333
SAIPEM ………………………………………… 334
VOL-V SAS……………………………………… 125
SCHNEIDER ELECTRIC FRANCE ………………… 340
Limousin
SGS QUALITEST INDUSTRIE …………………… 351
SGURRENERGY ………………………………… 352
SIKA INDUSTRY ………………………………… 353
ENCIS WIND …………………………………… 218
SIMRIT ………………………………………… 355
Lorraine
SKF IN FRANCE ………………………………… 356
ALMEA ………………………………………… 142
BERTHOLD……………………………………… 161
TECHNIP ……………………………………… 369
BOREAS ………………………………………… 79
UBIFRANCE ……………………………………… 33
CORDM ………………………………………… 193
VOITH TURBO…………………………………… 377
VOLTALIA ……………………………………… 126
HYDAC ………………………………………… 254
MAÏA EOLIS …………………………………… 108
Languedoc-Roussillon
8.2 FRANCE …………………………………… 131
ALIZEO …………………………………………… 59
ARCADIS ……………………………………… 150
MERSEN ……………………………………… 292
SAINT-LAURENT ÉNERGIE ……………………… 114
THEPAULT ……………………………………… 371
VENT D’EST SAS ……………………………… 123
CAPELLE ……………………………………… 175
Lower Normandy
EG SOL ………………………………………… 213
BMP …………………………………………… 164
ERNEO ………………………………………… 225
DIALOG …………………………………………… 38
EG SOL ………………………………………… 213
ETHM ………………………………………… 227
ETV …………………………………………… 228
STE GLOBAL …………………………………… 366
VALEOL ………………………………………… 374
VENTS D’OC ENERGIES RENOUVELABLES ……… 124
MOTEURS J.M. ………………………………… 298
395
INDEX
BECK CRESPEL ………………………………… 160
ONEM (OUEST NORMANDIE ENERGIE MARINE) …… 29
SAMEOLE ……………………………………… 115
CMD GEARS …………………………………… 183
Midi-Pyrénées
DDIS ……………………………………………… 65
DUFOUR ……………………………………… 209
3E FRANCE …………………………………… 130
DUNKERQUE PROMOTION ………………………… 25
ECL …………………………………………… 211
AYALA ………………………………………… 157
EOLISSIMA ……………………………………… 26
CAHORS DIVISION MOYENNE TENSION ………… 173
CAP INGELEC ………………………………… 174
GANTOIS SA …………………………………… 242
GINGER CEBTP ………………………………… 246
EOLTECH ……………………………………… 222
GINGER CEBTP ………………………………… 246
JADE …………………………………………… 267
HYSEO ………………………………………… 102
INGETEAM SAS ………………………………… 264
MAÏA EOLIS …………………………………… 108
MOOG ………………………………………… 297
MENARD ……………………………………… 288
NENUPHAR …………………………………… 304
SERHY ………………………………………… 349
PRONAL SAS ……………………………………… 45
TEXSYS ………………………………………… 370
SEL ENERBETON ……………………………… 346
Nord-Pas de Calais
UNIJECT ……………………………………… 373
Pays de la Loire
ALTEAD ………………………………………… 143
ARCADIS ……………………………………… 150
ARCADIS ……………………………………… 150
396
CAP INGELEC ………………………………… 174
Picardy
EMCC ………………………………………… 216
EOLYS RESSOURCES ET ENERGIES ……………… 223
FIXATOR…………………………………………… 40
FMGC …………………………………………… 41
ENERCON GMBH ………………………………… 66
FONDASOL …………………………………… 233
EOLECLEAN …………………………………… 221
MAÏA EOLIS …………………………………… 108
MERSEN ……………………………………… 292
GEOLIS ………………………………………… 100
GINGER CEBTP ………………………………… 246
PICARDY - SOMME WIND POWER NETWORK ……… 30
HYTORC ……………………………………… 258
SCOTT BADER SA ……………………………… 341
JEFMAG ……………………………………… 269
VALEOL ………………………………………… 374
WINDLAB ………………………………………… 56
Poitou-Charentes
LE MANS WIND CLUSTER ………………………… 27
LINAK FRANCE ………………………………… 276
MERCERON TP ………………………………… 291
METEODYN …………………………………… 295
NAVALU ………………………………………… 302
NEOPOLIA EMR …………………………………… 28
NET WIND ……………………………………… 305
NEXANS ……………………………………… 306
EG SOL ………………………………………… 213
ITRON ………………………………………… 266
LEROY-SOMER ………………………………… 275
LP RAOUL MORTIER (LYCÉE DES MÉTIERS DES ÉNERGIES
ET DES SERVICES AUX ENTREPRISES)……………… 53
NOVEOL ……………………………………… 311
SERGIES ……………………………………… 116
SOGEBRAS …………………………………… 361
Provence-Alpes-Côte dAzur
SOURIAU ……………………………………… 363
ARCADIS ……………………………………… 150
ATV …………………………………………… 154
397
INDEX
CAP INGELEC ………………………………… 174
ARCADIS ……………………………………… 150
CMI TECH 51 PASTOR ………………………… 184
186
AVENISENSE …………………………………… 156
ECO DELTA ……………………………………… 84
BOT FONDERIE ………………………………… 167
EG SOL ………………………………………… 213
CAP INGELEC ………………………………… 174
EOLE SYSTEM ………………………………… 220
FONDASOL …………………………………… 233
CHOMARAT …………………………………… 180
CMD GEARS …………………………………… 183
FOSELEV ……………………………………… 238
COBHAM SLIPRINGS …………………………… 187
GANTOIS SA …………………………………… 242
CORDIAL ……………………………………… 192
GINGER CEBTP ………………………………… 246
DEWI FRANCE ………………………………… 203
HYTORC ……………………………………… 258
EG SOL ………………………………………… 213
IDEOL ………………………………………… 260
IN VIVO ………………………………………… 263
FONDASOL …………………………………… 233
LYCEE DHUODA …………………………………… 54
MENARD ……………………………………… 288
NHEOLIS ……………………………………… 307
OSEAN ………………………………………… 317
PÔLE MER MEDITERRANÉE ……………………… 31
REVEL ………………………………………… 328
SEMANTIC TS…………………………………… 348
SERHY ………………………………………… 349
SNEF…………………………………………… 358
VOLTALIA ……………………………………… 126
GANTOIS SA …………………………………… 242
GINGER CEBTP ………………………………… 246
HYTORC ……………………………………… 258
JADE …………………………………………… 267
JAMES WALKER ………………………………… 268
KTR FRANCE …………………………………… 273
MAÏA EOLIS …………………………………… 108
Rhône-Alpes
MENARD ……………………………………… 288
ACROPHOTO …………………………………… 135
MERSEN ……………………………………… 292
AGRAFE ENR …………………………………… 138
MICEL ………………………………………… 296
398
VALEOL ………………………………………… 374
VALREA ………………………………………… 375
VOL-V SAS……………………………………… 125
PARKER OLAER ………………………………… 321
PROMIC ……………………………………… 325
SBS FORGE …………………………………… 336
SCAIME SAS …………………………………… 337
SERHY ………………………………………… 349
UNITE ………………………………………… 120
Upper Normandy
AETE ENERGIE …………………………………… 36
ETHM ………………………………………… 227
FDKOMPOSITES ………………………………… 232
GINGER CEBTP ………………………………… 246
G-TEC SA ……………………………………… 241
MANOFFSHORE ………………………………… 281
PAUMELLE ………………………………………… 43
399
INDEX
ADVERTISERS
ALIOS INGÉNIERIE …………………………………………………………………………………………… 141
ALSTOM …………………………………………………………………………………………………… 61
APPLISURFACES …………………………………………………………………………………………… 149
AREVA ……………………………………………………………………………………………………… 63
ARIA ………………………………………………………………………………………………………… 20
BRETAGNE PÔLE NAVAL ……………………………………………………………………………………… 23
CGR LEGAL ………………………………………………………………………………………………… 74
CMI TECH 5I PASTOR ………………………………………………………………………………………… 185
COMPAGNIE NATIONALE DU RHÔNE ………………………………………………………………………… 81
GDF SUEZ …………………………………………………………………………………………………… 97
GUERTON …………………………………………………………………………………………………… 251
HYDAC ……………………………………………………………………………………………………… 255
INGETEAM…………………………………………………………………………………………………… 265
MENARD …………………………………………………………………………………………………… 289
MERSEN …………………………………………………………………………………………………… 293
MOTEURS JM ………………………………………………………………………………………………… 2
PEFC ………………………………………………………………………………………………………… 58
REGION CHAMPAGNE-ARDENNE ………………………………………………………………… INSIDE COVER.
SCHAEFFLER FRANCE ……………………………………………………………………………………… 339
SDI ………………………………………………………………………………………………………… 345
SKF ………………………………………………………………………………………………………… 357
STE GLOBAL ………………………………………………………………………………………………… 367
WINDLAB …………………………………………………………………………………………………… 50
400

French Wind Power Industry - Syndicat des énergies renouvelables

Transcription

Similar documents

connect communicate collaborate

Fadi Sabbagha (Born Interactive

Unleash your Holset

cycling tour - Velo

a copy of Leisure Travel Sector

CAMVAP 2007 Annual Report

Robert Tomanek STRATEGIES OF TRANSPORT HORIZONTAL

White Paper: Wind Turbine Availability Excellence

click here - Korean-American Offshore Engineers Association

Arrivederci, Buca di Beppo: Developers buy prime S. Lake Union site