Acellent Software Package - Acellent Technologies Inc

Transcription

Acellent Software Package - Acellent Technologies Inc
ACELLENT SOFTWARE CATALOG
Acellent Technologies, Inc.
835 Stewart Drive
Sunnyvale, CA 94085
Slide Edge
Printer Edge
Page Edge (8.5 x 11)
www.acellent.com
Tel: 408-745-1188
[email protected]
S
oftware
Acellent's software works in tandem with our sensors and hardware to
detect and characterize structural anomalies in metals and composites
due to the presence of cracks, corrosion, debonds, and delaminations.
With the push of a button, our software instructs the hardware to
interrogate the structure by collecting data. The software analyzes the
data and presents the results in a clear, easy-to-understand display.
SHM Composite
SHM Composite is our state-of-the-art structural health monitoring software for
in-field applications for detection and quantification of damage in large
composite structures. SHM Composite includes all the features needed to
perform in-field detection of damage under real-world environmental conditions.
SHM Patch
SHM Patch is Acellent next-generation software for monitoring critical and
often hard to inspect “hot-spot” areas and components, for fatigue cracks in
aircraft, helicopters, pipelines and civil structures.
AIM
Acellent's Impact Monitoring (AIM) software monitors structures for impact
events. AIM provides in real-time the location, time and force of impact events.
The information is displayed visually as well as can be “voiced” by the
computer to alert the operator that an impact event has occurred.
ACESS & In-Sight
ACESS (ACEllent Software Suite) is our lab based software that
detects damages in composite and metal structures. ACESS
provides a diagnostic image of changes to the structure that are
indicative of damage. In-Sight is our lab based software that
detects localized damage in smaller structures. It’s similar to
ACESS but is customized for use with our ScanSentry hardware.
Acellent Technologies, Inc.
835 Stewart Drive
Sunnyvale, CA 94085
Slide Edge
Printer Edge
Page Edge (8.5 x 11)
www.acellent.com
Tel: 408-745-1188
[email protected]
SHM C
omposite
SHM Composite is our state-of-the-art structural
health monitoring software for in-field applications for
detection and quantification of damage in large
composite structures. SHM Composite includes all
the features needed to perform in-field detection of
damage under real-world environmental conditions.
SHM Composite
Self-Diagnostics
Built-in sensor self-diagnostic function to ensure all sensors are working
properly and there are no open or short circuits on any of the channels.
Path Definitions
Automatically defines optimal gain settings for every actuator-sensor path
and frequency.
Automated Data
Collection
Automatically collects data at user-defined intervals, and saves data with
time stamp for later analysis.
Data Visualization Advanced Signal
Investigation
o Time History Plot
o Waveform Scatter Plot
o Waveform Zooming +/o Wave Speed Calculation
o Fast Fourier Transform
Automated Data
Analysis Capability
Automatically collects and analyzes data in real-time, calculating damage
size based on calibration curves generated in the software.
Environmental
Compensation
State-of-the-Art algorithms to automatically find the best matched baseline
data with signal manipulation (if required) to minimize environmental effects
(e.g. temperature, loading, boundary condition etc.)
Damage detection is based on the First Arrival and Reflection Time Window
Statistical Outlier to
method. The Damage Index (DI) values will be calculated based on both
Detect Damage - SHM
windows of the signal. The statistical outlier method is used to determine
Level I
the affected signal paths.
Diagnostic Imaging for Automated State-of-the-Art damage detection visualization:
Level II & III Location Location of damage position inside the given sensor network is based on a
and Size
triangulation reasoning algorithm to determine damage location and size.
Data Output Format
Data Recall
Standardized MATLAB data format allows for external data analysis.
Data is retrievable for future analysis.
Acellent Technologies, Inc.
835 Stewart Drive
Sunnyvale, CA 94085
Slide Edge
Printer Edge
Page Edge (8.5 x 11)
www.acellent.com
Tel: 408-745-1188
[email protected]
SHM P
atch
SHM Patch is Acellent next-generation software for
monitoring critical and often hard to inspect “hot-spot”
areas and components, for fatigue cracks in aircraft,
helicopters, pipelines and civil structures.
Hot-spots are specific geometric locations in a
structure that are more prone to damage under
operation and variable loading conditions.
SHM Patch
Self-Diagnostics
Built-in sensor self-diagnostic function to ensure all sensors are working properly
and there are no open or short circuits on any of the channels.
Path Definitions
Automatically defines optimal gain settings for every actuator-sensor path and
frequency.
Automated Data
Collection
Automatically collects data at user-defined intervals, and saves data with time
stamp for later analysis.
Data Visualization Advanced Signal
Investigation
Automated Data Analysis
Capability
o Time History Plot
o Waveform Scatter Plot
o Waveform Zooming +/o Wave Speed Calculation
o Fast Fourier Transform
Automatically collects and analyzes data in real-time, calculating damage size
based on calibration curves generated in the software.
Environmental
Compensation
State-of-the-Art algorithms to automatically find the best matched baseline data
with signal manipulation (if required) to minimize environmental effects (e.g.
temperature, loading, boundary condition etc.)
Statistical Distribution
based Outlier DetectionLevel I Event Detection
Damage detection based on the Damage Index (DI) values of the current data
via statistical distribution
Direct Path Image –
Level II Damage
Localization
Diagnostic Imaging Level II Damage
Localization
Level III –
Damage Quantification
Data Output Format
Data Recall
Acellent Technologies, Inc.
835 Stewart Drive
Sunnyvale, CA 94085
Slide Edge
Printer Edge
Page Edge (8.5 x 11)
Direct Path Image displays the state change of the structure within the given
sensor network.
Automated State-of-the-Art damage detection visualization:
Location of damage positions with finer spatial resolution inside/outside of the
given sensor network based on the signal reflection from damage
o Automated generation of the calibration curves from damage simulator.
o Quantification of damage size based on the calibration curves.
Standardized MATLAB data format allows for external data analysis.
Data is retrievable for future analysis.
www.acellent.com
Tel: 408-745-1188
[email protected]
AIM
Acellent's Impact Monitoring (AIM) software monitors
structures for impact events. AIM provides in real-time
the location, time and force of impact events. The
information is displayed visually as well as can be
“voiced” by the computer to alert the operator that an
impact event has occurred.
AIM
Output
Sensor Configuration
Structural Definition
Calibration
Real-Time reporting of:
o Impact Location
o Impact Force
o Time of Impact
Easily configurable sensor location & channel set-up.
User-definable structural definitions allow for visual display of sensor layouts. Structural
definitions can be easily modified and saved as an alternative workspace, allowing multiple
impact monitoring configurations with the same structure and sensor installation.
Sensor calibration through user defined compensation factors.
Impact Reporting Threshold User-definable trigger value for the impact magnitude to be detected (or ignored when
Compatibility
below threshold).
Remote Control
Real-Time Run Mode
Data Display Capability
Ability to control remotely over long-distances via internet & wireless data transmission.
Continuous Real-Time Run Mode allows for the reporting of multiple impact events over
time.
Real-Time Impact History Table is continuously populated with each new impact event
displaying the Impact Location, Impact Force and Time of Impact. Display of the previous
impact events are scrolled and updated automatically in chronological order.
Visual Feedback - Color
coding of Impact Event
Markers
Impact Severity is color coded for display on the sensor layout image, based on the force
level determined for each impact event.
Audible Feedback - Voice
Impact Location Coordinates and Impact Force can be verbally announced after each
impact.
Audible Feedback - Alarm
Three discrete alarm sounds announce Impact Severity based on the force of the impact.
Intuitive Impact Curve
Individual waveform plots of the signal captured above threshold at each sensor location
are available for individual or collective viewing.
Impact Event Database
Level-I Event Detection
Level-II Event Localization
Level-III Impact Force
Estimation
Database of Impact Force-Time History is kept for future reference.
Detection of events (Run-way Debris, Bird impact, and tool drops, etc.) based on a set
threshold
Automated State-of-the-Art impact event localization
Higher accuracy in localizing impact event
State of art technique estimates force of passive impact on the structure
Acellent Technologies, Inc.
835 Stewart Drive
Sunnyvale, CA 94085
Slide Edge
Printer Edge
Page Edge (8.5 x 11)
www.acellent.com
Tel: 408-745-1188
[email protected]
ACESS
& In-Sight
ACESS (ACEllent Software Suite) is our lab based
software that detects damages in composite and metal
structures. ACESS provides a diagnostic image of
changes to the structure that are indicative of damage.
In-Sight is our lab based software that detects localized
damage in smaller structures. It’s similar to ACESS but is
customized for use with our ScanSentry hardware.
ACESS & In-Sight
Self-Diagnostics
N/A
Path Definitions
User must to define the wave paths manually
Probability of Detection
N/A
(POD)
Data Visualization Advanced Signal
Investigation
o Time History Plot
o Waveform Scatter Plot
o Waveform Zooming +/o Wave Speed Calculation
o Fast Fourier Transform
Diagnostic Imaging Direct Path Image
Direct Path Image displays the state change of the structure.
Baseline Space
Management
N/A
Diagnostic Imaging Damage Detection
N/A
Automated Processes N/A
Damage Detection
Environmental
Compensation
Data Output Format
Data Recall
Acellent Technologies, Inc.
835 Stewart Drive
Sunnyvale, CA 94085
Slide Edge
Printer Edge
Page Edge (8.5 x 11)
N/A
Multiple standardized data formats allows for external data analysis:
o MATLAB
o Excel
o Text
Data is retrievable for future analysis.
www.acellent.com
Tel: 408-745-1188
[email protected]