law enforcement models

Transcription

CATALOG 2013
V.2
“Building Decades of Experience into America’s Rifle”
Made In
www.windhamweaponry.com
The U.S.A.
TABLE OF CONTENTS
1
3
4
5
6
7
8
9
10
11
12
16
18
20
23
24
26
28
30
31
32
The Windham Weaponry Story
Windham Weaponry’s Warranty
Why A Windham Weaponry Rifle?
The CDI Rifle
The MPC Rifle
The SRC Rifle
The HBC Rifle
The VEX & Snow Camo VEX Rifles
The Carbon Fiber SRC
Law Enforcement Models
Barreled Upper Receiver Assemblies/Parts
A Visual Guide to the WW-15 Rifle
Barrel Kits / Barrels / Barrel Parts
Lower Receiver Parts & Parts Kits
Magazines & Magazine Accessories
Buttstocks, Buttstock Parts & Accessories
Pistol Grips, Forends & Accessories
Sights & Optics / Sight Parts
Gunsmithing Supplies & Accessories
Windham Weaponry Apparel & Accessories
Ordering Instructions, Returns, Shipping,
Gunsmithing, Gift Certificates, Order Form
Downrange...
Carbon
Fiber
Windham Weaponry’s Carbon Fiber SRC will be at your
FFL dealer soon. With durable and lightweight receivers
molded of Carbon Fiber composite and unique “billet” styling,
it features our highly accurate M4 barrel, six position telestock,
Picatinny rails on the gas block and receiver that are ready to
mount the sights of your choice, and a quality 30 round
magazine. For more details, see Page 10.
Welcome to the
second issue of the
Windham Weaponry
Catalog in 2013. Our “collage” Cover reflects
just some of purposes that fine Windham
Weaponry rifles are being used for by the
shooting public.
Opponents of “America’s Rifle” say they are
not used for hunting, but a look at the happy
face of 10 year old Dawson Black will convince
you otherwise. Dawson bagged his first deer
with a WW SRC after learning to shoot with his
dad at their local Fish & Game Club.
Below Dawson is one of our Law Enforcement
friends, and we’ve made many - in Police and
Sherrif’s Departments around the country. When
they have the opportunity to try our LE models,
the quality, accuracy, reliability and warranty
prove that “we’ve got your back” - to quote our
advertising!
Morgan Rogers - shown lower left with our
Snow Camo VEX-SS - is an Air Force Veteran and
avid shooter. You can see her (often as co-host)
on Jeff Zimba’s YouTube Channel called
“Bigshooterist”, and on Facebook.com/
GunTestVids. We thank Jeff for that photo, and
Morgan for making the VEX look great in the
woods of a Maine Winter!
Our friend Steve Markwith, shown above
Morgan, spent some quality range time sighting
in one of our CDI’s - with very accurate results
and the satisfaction of shooting a fine firearm.
Finally, we show another young shooter who
also has been learning his skills from his Dad Harley. With that target as evidence, 11 year old
Eli Ryan is obviously well schooled - he has a
sharp eye and an accurate WW SRC! Eli did the
research, saved his money, and with Dad’s help
selected Windham Weaponry as his AR of choice.
We hear he’s used his SRC to bring down some
awesome feral hogs as well!
As always, we encourage you to take firearms
safety seriously, to enjoy the great outdoors, and
to communicate with us any time you like. We’d
love to see photos of how you use your Windam
Weaponry rifle! Visit us on Facebook, or go to
WWW.WINDHAMWEAPONRY.COM
Best wishes and thanks from the
WINDHAM WEAPONRY TEAM
Model: R16M4FTT-CF1
Caliber: 223. Rem./5.56mm NATO
16” M4 Chrome Lined Barrel
The Windham Weaponry Story... A team of the finest firearms manufacturers in the U.S.A. has been re-assembled to bring to market the highest quality AR type
rifle possible. These good Maine folks - most of whom are former employees of
Bushmaster Firearms - offer many years of experience in the industry, and all look
forward to working with you, to serving your needs, and to building you a great rifle.
When the people who bought Bushmaster in 2006 decided to move it “lock, stock and barrel” out of Maine to
New York in 2011, the original Bushmaster owner, Mr. Richard Dyke was left with both a dilemma and an
opportunity. Almost to the day of the 2011 move, Mr. Dyke’s non-compete clause expired. He still owned the
property where Bushmaster had been built, and knew all the workers - now laid off - who had helped him build it.
He made a decision to “get back in the game” and promptly put an email out to many of his former employees and
friends asking if there was interest in joining him for a new project. With a resounding “yes” of support, he
gathered the financing in two days, and started bringing people back into their long-time Windham manufacturing home. Phoenix-like, Windham Weaponry was on the rise.
Within three months, the first productions models of the new Windham Weaponry line had been perfected
and delivered. Quality, fit, finish, durability, accuracy and value were all superb - giving creedence to Windham
Weaponry’s motto “The Quality Goes In, Before The Rifle Goes Out”. The firearms industry and consumers
welcomed this new effort warmly, old friends and contacts were re-established, and sales grew. In less than a year
and a half, Windham Weaponry had brought back almost 70 employees, benchmarked impressive sales numbers,
and established their name as one of the pre-eminent firearms manufacturers in the country. The press heralded it
as “truly an American success story”, and all due to the vision of its founder.
Further growth for Windham Weaponry has already been planned and implemented. A “Carbon Fiber
Division” has been established in Phoenix through a partnership with Patriot Ordnance Factory, and JC Machine
and Motorsports LLC. The three companies have jointly occupied a new 12,000 square foot production facility in
Phoenix which will produce rifles and firearms parts, and serve as a design and development center for new
firearms products. Watch www.windhamweaponry.com for further developments as the Windham Weaponry
story continues to unfold. Some of the members of the Windham Weaponry team are introduced below.
Richard Dyke
Windham Weaponry Chairman and Principal
Owner
Allen Faraday
Windham Weaponry Executive Vice President
of Operations
“I was Chairman of Bushmaster, and Principal Owner from
1976 to 2006. I’m very pleased to have brought this fine
group back together, and I’m delighted at the progress and
products we’ve made in such a short time.”
“I worked for the original Bushmaster for 14 years. I’m
excited to be back in the business with a great new
company and a great team!”
Jeff Dyke
Windham Weaponry Treasurer
“I have worked for, and been involved with the original
Bushmaster company for over 25 years, and I’m looking
forward to helping build Windham Weaponry into another
great company that we can all be proud of.”
Yung Edwards
Windham Weaponry Carbon Fiber Division
Manager
“I was a Manager for the old Bushmaster Carbon 15
Division for 5 years. It’s exciting to be a part of such a
dynamic new company.”
Kim Burnham
Windham Weaponry Chief Financial Officer
Mark Eliason
Windham Weaponry Vice President of Sales &
Marketing
“I’m delighted to be able to bring my 8 years of experience
in the firearms industry to Windham Weaponry, I‘m anxious
to acquire and renew relationships with our future
customers, vendors and employees.”
“I’m excited to be starting this new adventure called
Windham Weaponry with my friends and former
co-workers. We’ll make and sell rifles that you can all be
proud to own.”
Warren Dyke
Windham Weaponry Vice President of
Production Planning
Todd Coons
Windham Weaponry Law Enforcement Sales
Manager
“I’m excited to be involved with a company where the
atmosphere is contagious from such engaged people, who
are so dedicated to quality and customer satisfaction.
That’s what makes Windham Weaponry a great company!”
“After a career with the City of Portland Police Dept., I
welcome the opportunity to bring my experience to help
Windham Weaponry meet the needs of Law Enforcement
Departments and Officers all around the country.”
Cheryl Eliason
Windham Weaponry Customer Service
Manager
Dale Lauten
Windham Weaponry Invoicing Manager
“I worked for Bushmaster Firearms in Customer Service for
12 years. I am looking forward to be working with great
people to offer you the best products and customer service
with this exciting new company. “
“I previously worked for Bushmaster for 21 years. I am so
thrilled to be back in the gun business and looking forward
to establishing ourselves as THE BEST IN THE BUSINESS!”
At right, the Windham Weaponry Business Park in
the beautiful Sebago Lakes Region of Southern Maine,
home of the finest AR15 rifle makers in America.
Windham Weaponry, Inc.
Windham Business Park • 999 Roosevelt Trail
P.O. Box 1900 • Windham, ME 04062
Office: 1-207-893-2223 • Fax: 1-207-893-1623
Toll Free: 1-855-808-1888 • www.windhamweaponry.com
“The Quality Goes In Before The Rifle Goes Out”
1
Though the Windham Weaponry team continues to grow, we wanted to offer this
glimpse of some of the dedicated people of our team. They all help to make this the
great organization it is. We
introduce you to these fine
Matt Hasty
Maine folks so you’ll be able to
Windham Weaponry Retail Sales Manager
put a face on the quality of your rifle. When you call
“I worked for Bushmaster for 12 years in Inventory Control,
Customer Service, Sales and Project Management. I am
Windham Weaponry, you won’t get a menu or a
very excited to be a part of Windham Weaponry and to
recording - at least during regular business hours. We
have the opportunity to work with a great group of
look forward to hearing from you.
people.”
Doug Price
Windham Weaponry Production Manager
Tammy Hadley
Windham Weaponry Quality & Outsourcing
Manager
“I worked for Bushmaster for 17 years, first as an
assembler, then 11 years as Production Manager. I'm
excited and honored to be a part of Windham Weaponry
and with great fellow employees.“
“I worked for Bushmaster for 12 years in Quality Control,
and then as Outsourcing & Transportation Manager. I'm
very excited to bring my knowledge to this new, Maine
based company with such wonderful ownership.”
Sherrie Nickerson
Windham Weaponry Purchasing Manager
Leon Douglas
Windham Weaponry Receiving Manager
“I worked for Bushmaster for 13 years in Purchasing, and I
look forward to a bright future with this great Windham
Weaponry team in our new company.”
“I worked for Bushmaster Firearms for 9 years, and I’m
very excited to be involved with this new company as a
member of this great Windham Weaponry team.”
Erik Winter
Windham Weaponry Gunsmith
Ted Lauten
Windham Weaponry Logistics Team
“I worked for Bushmaster Firearms for 13 years as part of
the production team and gunsmithing department. I am
looking forward to helping provide excellent quality and
customer service with this great new company and
dedicated Windham Weaponry team!”
“I previously worked for Bushmaster for 17 years. I am
pleased to be working with my gun family again, and
striving to provide the best products possible.”
Bill Buchanan
Windham Weaponry Production Team
Glenn Edwards
Windham Weaponry Maintenance Manager
“I worked for Bushmaster for 12 years. I'm really enthused
about the new company and about making another
superior product with a knowledgeable group of
professional employees.”
“As a member of the Bushmaster family for 12 years, it was
hard to see it leave. But now I have the great honor to be
a part of a whole new company in the gun industry.”
Jackie Eliason
Windham Weaponry Invoicing Department
Nicole Caron
Windham Weaponry Accounting Department
“After 17 years with Bushmaster I was sorry to see it end.
Now with the start of Windham Weaponry I am very happy
to be reunited with old friends, and looking forward to
exciting growth here.”
“This is a dream come true to work with such a great team.
I previously worked for Bushmaster Firearms for 10 years. I
am very excited to be part of this new adventure with
Windham Weaponry.”
Mary Galipeau
Windham Weaponry Compliance Specialist
Emil Braley
“I was previously with Bushmaster Firearms for 10 years as
their Compliance Specialist. I am delighted to be part of
the exciting new challenge ahead, and to working with this
very experienced and professional Windham Weaponry
team!”
“I worked for Bushmaster for 8 years in production &
assembly. I’m proud to work for Windham Weaponry
whose priority is the highest quality and dependability in
the gun industry.”
Karen Moore
Windham Weaponry Shipping Department
Karen Fogarty
Windham Weaponry Assistant to the V.P. of
Sales & Marketing
“Hi, I worked for the Bushmaster Team for 11 years. I am so
thrilled to be a part of the new Windham Weaponry Team
that has been my family for so long. We will be the Best of
the Best in performance, quality and customer service.”
“I worked for Bushmaster for 6 years, first as Executive
Administrator and then managing HR. I am proud to be a
part of this team of extraordinary people providing
exceptional products and outstanding customer service.”
Percy Dieppa
Windham Weaponry Information Technology
Manager
Ron Roberts
Windham Weaponry Customer Service
“I worked for Bushmaster 12 years. I'm elated to have the
opportunity to be part of this great team. I'm extremely
proud of everyone's dedication and attention to detail.
That is what makes this company a great company!”
“I worked for Bushmaster for 12 years until the company
closed. I'm thankful to Mr. Dyke and family for this
opportunity to bring my production experience to this new
company, and to once again to be associated with this
great group that I've known for a very long time.”
Joel Sanborn
Roger Cote
Windham Weaponry Quality Control Team
“I'm happy to once again be a part of a group of talented
people that have nearly 400 combined years of experience
in the firearms business.”
“I bring my 10 years of Military service and weapons
repair skills to a wonderful company - making what I
believe are the best AR rifles on the market. I worked for
Bushmaster for 3 years and look forward to many more
years of making great rifles for Windham Weaponry.”
Windham Business Park • 999 Roosevelt Trail • P.O. Box 1900 • Windham, ME 04062
Office: 207-893-2223 • Fax: 207-893-1623 • Sales Line: 855-808-1888 • www.windhamweaponry.com
2
Windham Weaponry – Protecting Your Firearm Investment
Backing up our commitment to producing the finest rifles possible, every Windham Weaponry
rifle includes our Transferable Lifetime Warranty - the best in the business!
TRANSFERABLE LIMITED LIFETIME WARRANTY
Windham Weaponry, Inc. (WWI) will warranty all firearms manufactured by
WWI against any and all manufacturer’s defects in material and workmanship
which affect reasonable operation for the lifetime of the firearm to the purchaser.
This warranty is transferable from the original purchaser to a subsequent buyer.
Warranty is established by registering online at:
http://www.windhamweaponry.com
or by phone with our Customer Service Department at 855-808-1888.
Warranty claims may be made by contacting Customer Service, either in writing
or by phone for a Return Authorization number prior to delivering the unloaded
firearm to Windham Weaponry, Inc., 999 Roosevelt Trail, Windham, Maine
04062, freight prepaid by the purchaser. Firearms and ammunition must be
shipped separately. No COD shipments will be accepted.
WWI will repair or replace only those parts determined to be defective by the
factory. This warranty does not apply to normal wear and tear of any parts or
protective finishes.
The following are specifically excluded from coverage under this warranty and
will cause said warranty to become null and void:
Damage or malfunction resulting from accident, negligence, misuse or
unauthorized repair or alteration; barrel obstruction; use of ammunition other
than NATO and/or SAAMI specification new production ammunition; use of
any hand loaded, reloaded, imported or factory re-manufactured ammunition;
failure to provide reasonable and necessary maintenance as described in the
Operator’s Manual accompanying the firearm; rust or corrosion; use of
replacement parts other than parts authorized by WWI for use in WWI firearms;
any unauthorized repair or any alteration, including of a cosmetic nature,
performed on the firearm by an individual, organization, company or entity other
than WWI; unreasonable or excessive use of the firearm.
Any finished products that are not assembled at our facilities, or are assembled
using imported or used parts. This includes complete rifle kits, upper receivers,
lower receivers, barrel assemblies, etc.
No implied warranties of any kind are made herein. Limited Lifetime Warranty
does not apply
to any•accessory
items.Trail • P.O. Box 1900 • Windham, ME 04062
Windham
Weaponry
999 Roosevelt
Telephone:
2223for
• Fax:
207 893
• Sales Line:
855 808
1888
WWI
assumes207
no 893
liability
accidental
or 1623
consequential
damages.
Some
states
do not
[email protected]
the exclusion or limitation of accidental
or consequential damages
E-mail:
www.windhamweaponry.com
and therefore this limitation may not apply to you.
Windham Weaponry • 999 Roosevelt Trail • P.O. Box 1900 • Windham, ME 04062
Telephone: 207 893 2223 • Fax: 207 893 1623 • Sales Line: 855 808 1888
E-mail: [email protected] www.windhamweaponry.com
The Windham Weaponry Limited Lifetime Warranty can be easily activated online
(www.windhamweaponry.com), or by calling Toll-Free: 1-855-808-1888
By following the simple instructions on the Website Warranty Page, your Windham Weaponry
Firearm’s Warranty will be in effect imediately upon completion. The Windham Weaponry Team
is dedicated to ensuring your satisfaction with their fine products, and hope you enjoy them safely
for many years. If you need parts, service or advice concerning your rifle, we are never more than a
phone call away, and will be pleased to help you.
3
Why a Windham Weaponry rifle
is your best firearms value...
★
LIFETIME WARRANTY - transferable to any future owner.
★ AN EXPERIENCED TEAM - dedicated to quality Customer Service – we
service what we sell! Superior AR Weapons Systems built in the State of Maine
by experienced people who care.
★ BARRELS - of 4150 Chrome Moly Vanadium 11595E Steel with Chrome
Lining in Bore and Chamber for long wear and ease of cleaning. Standard
barrels are chambered for 5.56 NATO ammo, and are safe for both .223 and
5.56 NATO. Air Gauging is a standard step to help ensure accuracy. Final
finish is military grade Black Manganese Phosphate for protection against
rust and corrosion. On Varmint models, barrels are Precision 416R
Stainless Steel, Fluted, with a Matte Finish. That barrel features a
Compass Lake Specification Firing Chamber with Matched Bolt.
★ HANDGUARDS - we use the superior M4 Double Heat Shielded
Handguards on most models. Varmint rifles are fitted with custom
aluminum free-float forends.
★ ALL PARTS MADE IN THE USA - and “Q-C’d” in the factory by
experienced professionals.
★ BARREL EXTENSIONS - on all WW models are machined with the
reliable M4 Feed Ramps for consistent cartridge feeding.
★ BOLTS - machined from Carpenter 158 Steel for strength and
durability.
★ BOLT CARRIERS - Chrome Lined inside
for durability, and machined from highest
quality steel. Chrome Lined Gas Keys are
staked on by our professional Gunsmiths.
★ TRIGGERS - are precision machined before being finished
in Black Manganese Phosphate - then ground with a sharp
release lip for smooth take up and a crisp release.
★ TRIGGER GUARD - A premium Aluminum Trigger
Guard - much stronger than plastic varieties - is
standard on our rifles.
★ RECEIVERS - CNC machined from Forged 7075
T6 Aircraft Aluminum - bead blasted to a
non-reflective matte surface before final finishing in
Hardcoat Black Anodize.
★ SAFETY SELECTOR INDICATOR MARKINGS are stamped
on both sides of the Lower Receiver for added safety.
Made In
The U.S.A.
© 2013, Windham Weaponry, Inc.
4
CDI Model
NOTE: FFL required for purchase of complete rifles.
The Windham Weaponry CDI was developed as a result of numerous
customer requests for a rifle that includes many of our most popular
accessories. Think of it as the firearms equivalent of a Shelby Mustang already factory equipped for maximum performance!
Model:
Caliber:
Type:
Action:
Capacity
Safety:
Receiver:
Receiver Material:
Receiver Finish:
Bolt Material:
Barrel:
Barrel Material:
Barrel Extension:
Rifling:
Stock:
Forend:
Foregrip:
Pistol Grip:
Trigger Guard:
Rear Sight:
Front Sight:
Packaging:
Including:
Weight:
Length Overall:
Warranty:
M.S.R.P.:
R16M4SFSDHT
.223 Rem. / 5.56mm NATO
Rifle
Semi-Automatic, Gas Impingement System
30 + 1- Ships with one 30 Rd. Magazine (accepts all std. sizes)
Manual Lever with Indicator Markings on Both Sides of Receiver
M4A4 Type Flat Top Upper Receiver
Forged 7075 T6 Aircraft Aluminum
Hardcoat Black Anodize Finish
Carpenter 158 Steel
16” M4 Profile, Chrome Lined with Vortex Flash Suppressor
4150 Chrome Moly Vanadium 11595E Steel
Machined with M4 Feed Ramps
1 Turn in 9” - Right Hand Twist
Magpul MOE 6-Position Telescoping Buttstock
Diamondhead Free-float Forend
Magpul AFG Angled Foregrip
Magpul MOE Pistolgrip
Machined Aluminum Trigger Guard
Diamondhead Dual Aperture Flip-up
Diamondhead Front Flip-up Sight
Foam Lined, Hard Plastic Gun Case
Black Web Sling & 32 Page Full Color Operators Manual
7.025 Lbs. (without Magazine)
36.125” (32.375” with Telestock collapsed)
Windham Weaponry Transferable Lifetime
$1680.00
California Compliant CDI Model
Model: R16M4SFSDHT-CA
M.S.R.P.: $1712.00
Capacity: 10 + 1
A “Compliant” model of the Windham Weaponry CDI
is available for legal sale in the State of California. It
includes a 10 Round Magazine and unique”Bullet
Button” Magazine Release that requires a tool for
Magazine removal.
Made In
The U.S.A.
5
MPC Model
The Windham Weaponry MPC has - from day
one - been our “most popular carbine”.
Accuracy, durability, fit, finish, value, this carbine has it all, and with
our Lifetime Transferable Warranty, you know it will retain its value for
years to come.
Model:
Caliber:
Type:
Action:
Capacity
Safety:
Receiver:
Receiver Material:
Receiver Finish:
Bolt Material:
Barrel:
Barrel Material:
Barrel Extension:
Rifling:
Stock:
Forend:
Pistol Grip:
Trigger Guard:
Rear Sight:
Front Sight:
Packaging:
Including:
Weight:
Length Overall:
Warranty:
M.S.R.P.:
R16M4A4T
.223 Rem. / 5.56mm NATO
Rifle
M4A4 Type Flat Top Upper Receiver with Detachable Carry Handle
Carpenter 158 Steel
16” M4 Profile, Chrome Lined with A2 Flash Suppressor
6-Position Telescoping Buttstock with Windham Weaponry Logo
M4 Double Heat Shield Handguards
A2 Black Plastic Pistolgrip
A4 Dual Aperture Elevation & Windage
Adjustable: 300 - 600 M
Adjustable Height Square Post in A2
Standard Base
Black Web Sling & 32 Page Full Color
Operators Manual
$1086.00
Compliant MPC Models
for States of CA • NY • NJ • MA • CT • MD
NY-NJ-MA-CT
Model shown
CA Model: R16M4A4T-CA
M.S.R.P. for both: $1111.00
NY-NJ-MA-CT Model: R16M4A4PT-NY
“Compliant” Windham Weaponry MPC models are available for
legal sale in those States. The CA Model includes a 10 Round
Magazine with a ”Bullet Button” Magazine Release that requires
a tool for magazine removal, and a standard telestock.
The NY-NJ-MA-CT Model has a fixed length Telestyle Stock, 10
Round Magazine and compliant welded muzzle brake.
Maryland’s only restriction limits magazine capacity to 20 rounds.
6
Made In
The U.S.A.
SRC Model
The Windham Weaponry SRC “sight ready
carbine” was created for those AR shooters who
intend to add their own aftermarket sights, scopes or optics, and want a
rifle that offers the option of not purchasing factory sights. The SRC offers
all the Windham Weaponry quality with the flexibility of front and rear
same plane Picatinny Rails.
Model:
Caliber:
Type:
Action:
Capacity
Safety:
Receiver:
Receiver Material:
Receiver Finish:
Bolt Material:
Barrel:
Barrel Material:
Barrel Extension:
Rifling:
Stock:
Forend:
Pistol Grip:
Trigger Guard:
Rear Sight:
Front Sight:
Packaging:
Including:
Weight:
Length Overall:
Warranty:
M.S.R.P.:
R16M4FTT
.223 Rem. / 5.56mm NATO
Rifle
M4A4 Type Flat Top Upper Receiver with Picatinny Rail
Carpenter 158 Steel
None - ready for accessory sights/optics
None - Picatinny Rail Gas Block ready for
accessory sights
Operators Manual
$1040.00
Made In
The U.S.A.
Compliant SRC Models
for States of CA • NY • NJ • MA • CT • MD
CA Model: R16M4FTT-CA
M.S.R.P. for both: $1055.00
NY-NJ-MA-CT Model: R16M4FTPT-NY
“Compliant” Windham Weaponry MPC models are available for
legal sale in those States. The CA Model includes a 10 Round
Magazine with a ”Bullet Button” Magazine Release that requires
a tool for magazine removal, and a standard telestock.
The NY-NJ-MA-CT Model has a fixed length Telestyle Stock, 10
Round Magazine and compliant welded muzzle brake.
Maryland’s only restriction limits magazine capacity to 20 rounds.
7
HBC Model
The Windham Weaponry HBC model, our
“heavy barreled carbine”, is a close cousin to the
MPC model except for its barrel - see the barrel comparison below.
Some shooters feel the heavy profile provides more rigidity and
accuracy, but either way its all 100% Windham Weaponry quality.
Model:
Caliber:
Type:
Action:
Capacity
Safety:
Receiver:
Receiver Material:
Receiver Finish:
Bolt Material:
Barrel:
Barrel Material:
Barrel Extension:
Rifling:
Stock:
Forend:
Pistol Grip:
Trigger Guard:
Rear Sight:
Front Sight:
Packaging:
Including:
Weight:
Length Overall:
Warranty:
M.S.R.P.:
R16A4T
.223 Rem. / 5.56mm NATO
Rifle
M4A4 Type Flat Top Upper Receiver with Detachable Carry Handle
Carpenter 158 Steel
16” Heavy Profile, Chrome Lined with A2 Flash Suppressor
A4 Dual Aperture Elevation & Windage
Adjustable: 300 - 600 M
Adjustable Height Square Post in A2
Standard Base
Operators Manual
$1096.00
Heavy Barrel Profile & M4 Barrel
Profile Comparison...
.980”
.950”
.850”
.750”
Heavy Profile
.745”
.700”
M4 Profile - 9.6 oz. lighter
.980”
.640”
.845”
.750”
.720” .610”
.745”
The Heavy Barrel profile features more thickness under the
handguard area, and a straight machine turning from the sight
base forward to the slight step before the muzzle threading.
The M4 Barrel profile is turned thinner and lighter under the
handguards. The .610” step cut forward of the sight base is
designed for mounting an M4 Grenade Launcher.
8
.700”
Made In
The U.S.A.
VEX-SS Model
The Windham Weaponry VEX-SS is our “varmint
exterminator”, and was designed with the varmint
hunter in mind. Its highly accurate 20” stainless steel barrel is matte finished
to cut reflection and fluted to reduce weight. Aftermarket sights, scopes or
optics can be mounted - scope riser blocks are included to provide a comfortable cheek weld on the skeleton stock. A knurled and vented forend with
bipod stud and sling swivel free floats the barrel for optimum accuracy.
Model:
Caliber:
Type:
Action:
Capacity
Safety:
Receiver:
Receiver Material:
Receiver Finish:
Bolt Material:
Barrel:
Barrel Material:
Chamber:
Rifling:
Stock:
Forend:
Pistol Grip:
Trigger Guard:
Rear Sight:
Front Sight:
Packaging:
Including:
Weight:
Length Overall:
Warranty:
M.S.R.P.:
R20FSSFTSKV
.223 Remington
Rifle
5 + 1- Ships with one 5 Round Magazine (accepts all std. sizes)
M4A4 Type Flat Top Upper Receiver with Optics Riser Blocks
Carpenter 158 Steel
20” Stainless Steel - Fluted - Matte Finish
Precision 416R Stainless Steel
Compass Lake Specification with Matched Bolt
1 Turn in 8” for heavier varmint bullets - Right Hand Twist
Skeleton Stock with Sling Swivel
Knurled, Vented Aluminum Free-Floating Forend with Sling Swivel
Hogue Rubber Pistol Grip
None - ready for sights or optics on Picatinny Rail platform
None - Picatinny Rail Gas Block ready for accessory sights
Black Web Sling & 32 Page Full Color Operators Manual
38.5”
$1295.00
For Winter Hunting...
The Snow Camo VEX-SS
Made In
The U.S.A.
Model: R20FSSFTS-C1
M.S.R.P.: $1470.00
The Snow Camo VEX-SS is almost
completely covered in our unique
winter camoflage pattern - perfect
for winter varmint hunting.
CA Compliant VEX-SS Model CA Model: R20FSSFTSKV-CA
M.S.R.P.: $1320.00
Windham Weaponry offers a VEX-SS model
compliant with regulations there. The CA
Model includes a 5 Round Magazine with a
”Bullet Button” Magazine Release which
requires a tool for magazine removal.
Other than that, specs are same as the
VEX-SS described above.
9
CARBON FIBER Models
The Windham Weaponry Carbon Fiber SRC was born
out of the latest carbon fiber composite molding
technology to bring you an AR type rifle of incredibly light weight - without
sacrificing any Windham Weaponry quality, durability, accuracy or value. All
the same high quality components of our standard models are married with
carbon fiber molded receivers, and with our Lifetime Transferable Warranty,
you can be guaranteed we will stand behind its quality for a lifetime.
Model:
Caliber:
Type:
Action:
Capacity
Safety:
Receiver:
Receiver Material:
Receiver Finish:
Bolt Material:
Barrel:
Barrel Material:
Barrel Extension:
Rifling:
Stock:
Forend:
Pistol Grip:
Trigger Guard:
Rear Sight:
Front Sight:
Packaging:
Including:
Weight:
Length Overall:
Warranty:
M.S.R.P.:
R16M4FTT-CF1
.223 Rem. / 5.56mm NATO
Rifle
30 + 1 - Ships with one 30 Rd. Magazine (accepts all std. sizes)
M4A4 Type Flat Top Upper Receiver with molded Picatinny Rail
Molded Carbon Fiber Composite
Carbon Fiber Matte Black - as molded
Carpenter 158 Steel
Integral Molded Carbon Fiber
None - ready for accessory sights or optics
None - Picatinny Rail Gas Block ready for
accessory sights
Operators Manual
$958.00
Made In
The U.S.A.
Carbon Fiber Molded Technology
for the next generation of AR15 rifles...
Windham Weaponry’s carbon fiber composite molded receivers bring much
more than light weight to the range! Carbon fiber receivers will dissipate heat
faster than aluminum, have no surface finish to wear off, and the carbon fiber composite has an
inherent lubricity that enhances long wear. Windham Weaponry’s receiver molds were created at a
state of the art design facility to yield a
superior fit and function while utilizing
many standard AR parts.
Our Carbon Fiber Receivers retain all
the recognizeable features of the AR
platform, but are molded with a unique
“billet machined” appearance – think
Darth Vader meets the AR world!
The Carbon Fiber SRC is available
at your FFL dealer now, with other
models being developed to follow.
10
LAW ENFORCEMENT MODELS
When you need the right tool for the job,
WE’VE GOT YOUR BACK.
Windham Weaponry brings its superb quality, accuracy and durability to this line of
fine Law Enforcement models. Beyond our standard models shown here, we encourage officers, agents and departments to contact our Law Enforcement Sales Manager
so that we can create exactly the configuration that will meet your specific needs. As
always, Windham Weaponry is proud to offer a Lifetime Transferable Warranty on all
its rifles. See www.windhamweaponry.com for complete details.
Made In
The U.S.A.
• .223 Rem. / 5.56mm NATO Caliber
• 16” M4 Barrel of 4150 Chrome Moly Vanadium 11595E
Steel w. M4 Feed Ramps, Chrome Lined, Rifled 1 x 9“ RH
• Semi-Automatic, Gas Impingement System
• Ships with one 30 Rd. Magazine (accepts all sizes)
• M4A4 Type Flat Top Upper Receiver with DiamondModel: R16M4FTT-SB02
head Dual Aperture Flip-Up Sight • Diamondhead Front
Flip-Up Sight on Picatinny Rail Gas Block • Carpenter 158 Steel Bolt • 6-Position Telescoping Buttstock with
single point QD Sling Adapter • A2 Black Plastic PistolGrip • Diamondhead 2-Piece Aluminum Handguard w.
Quad Rails • Weight w/out Magazine: 6.55 lbs. • Length: 36.125” (32.375” - stock collapsed)
• 11.5” Barrel of 4150 Chrome Moly
Vanadium 11595E Steel w. M4 Feed
Ramps, Chrome Lined, Rifled 1 x 9“ RH
w. Vortex Flash Hider • Semi-Automatic, Gas
Impingement System • Ships with one 30 Rd.
Model: R11FTT-SBO1QDS
Magazine (accepts all sizes) • M4A4 Type Flat Top Upper
Receiver with Diamondhead Dual Aperture Flip-Up Sight • Diamondhead Front Flip-Up Sight on Picatinny Rail
Gas Block • Carpenter 158 Steel Bolt • 6-Position Telescoping Buttstock with single point QD Sling Adapter
• A2 Black Plastic PistolGrip • Diamondhead 2-Piece Aluminum Handguard w. Quad Rails & Mission First
Tactical Vertical Grip • Weight w/out Magazine: 7.0 lbs. • Length: 32” (28.25” - stock collapsed)
• 11.5” Barrel of 4150 Chrome Moly Vanadium 11595E
Steel w. M4 Feed Ramps, Chrome Lined, Rifled 1 x 9“ RH
• Semi-Automatic, Gas Impingement System
• Ships with one 30 Rd. Magazine (accepts all sizes)
Model: R11A4T
• M4A4 Type Flat Top Upper Receiver with A4
Also available with 14.5” Bbl.
Removable Carry Handle • A2 Front Sight • Carpenter 158
Steel Bolt • 6-Position Telescoping Buttstock • A2 Black Plastic PistolGrip • M4 Fiberglass Double Heat Shield
Hand Guards • Weight w/out Magazine: 6.65 lbs. • Length: 32” (28.25” - stock collapsed)
For additional models, complete details and pricing, contact: Law Enforcement Sales
LE Sales Line: 1-855-808-1888 • E-mail: [email protected]
11
Barreled Upper Receiver Assemblies
Windham Weaponry Barreled Upper Receiver Assemblies are sold in a variety of configurations to
allow the shooter or home assembler many choices. The “RANGE-READY” assemblies are just that completely assembled with all necessary parts, ready to snap onto your lower receiver and take to
the range for firing. Because many AR shooters may already have a Bolt Carrier Assembly, a
Charging Handle, or perhaps an A4 Removable Carry Handle, we offer configurations that allow
them to save money and utilize these components. Regardless of configuration, you can be assured
that a Windham Weaponry Barreled Upper Receiver Assembly is the same high quality and superb
accuracy that we use when assembling our complete rifles.
Range-Ready MPC 16” M4 Profile Upper
Receiver/Barrel Assembly - $665.00
Part# UR16M4A4B
Includes Bolt Carrier Assembly, Charging Handle, A4 Carry Handle
This 16” M4 Profile Barreled Upper Assembly from our popular “MPC” carbine, is complete and ready to snap onto your
Lower Receiver. The highly accurate 16” M4 barrel is machined from 4150 Chrome Moly Vanadium 11595E steel - rifled 1 x 9”
Right Hand Twist, and chrome lined for long wear and easy cleaning. An A2 Flash Suppressor and standard A2 Front Sight are
fitted, and the machined aluminum flat top Upper Receiver is complete with Bolt, Bolt Carrier Assembly, Charging Handle,
Forward Assist, Ejection Port Cover, and Removable A4 Carry Handle with 300 - 600 meter Dual Aperture Rear Sight.
MPC 16” M4 Upper Receiver/Barrel Assembly
- Less Carry Handle - $570.00
Part# UR16M4LHB
Includes Bolt Carrier Assembly & Charging Handle
MPC 16” M4 Upper Receiver/Barrel Assembly
- Less Bolt Carrier and Charging Handle
$520.00 - Part# UR16M4A4
Includes A4 Carry Handle with 300 - 600 Meter Rear Sight
16” M4 Profile Upper Receiver/Barrel Assembly
- Less Bolt Carrier, Charging Handle and
A4 Removable Carry Handle
$425.00 - Part# UR16M4LH
16” M4 “BAN COMPLIANT” Upper Receiver/Barrel Assemblies for NY / NJ / CT / MA
Compliant 16” MPC M4 Profile Upper
Receiver Barrel Assembly - $695.00
Part# UR16M4A4PBB
This range ready M4 Barreled Upper Receiver Assembly is
compliant with regulations in the States of CT, MA, NJ and NY. Differences from the MPC Assemblies above are the
permanently affixed A2 birdcage style compensator (shown at left), and the bayonet lug has been machined off. Standard A2
Front Sights are fitted. The aluminum flat top Upper Receiver is complete with Bolt, Bolt Carrier Assembly, Charging Handle,
Forward Assist, Ejection Port Cover, and A4 Removable Carry Handle with 300 - 600 meter Dual Aperture Rear Sight.
Ban Compliant 16” MPC M4 Upper Receiver/Barrel
Assembly - Less Carry Handle
$600.00 - Part# UR16M4LHPBB
Includes Bolt, Bolt Carrier Assembly & Charging Handle
Compliant MPC 16” M4 Upper Rec./Bbl. Assembly
- Less Bolt Carrier and Charging Handle
$550.00 - Part# UR16M4A4PB
Includes A4 Carry Handle with 300 - 600 Meter Rear Sight
Ban Compliant MPC 16” M4 Profile Upper Rec./Bbl.
Assembly- Less Bolt Carrier, Charging Handle and
$455.00 - Part# UR16M4LHPB
12
Range-Ready 16” SRC M4 Profile Upper
Part# UR16M4FTB
Includes Bolt Carrier Assembly and Charging Handle
This is the complete M4 Barreled Upper Assembly from our unique "SRC” rifle. Its tack-driving 16” M4 profile barrel is
chrome lined and machined from 4150 Chrome Moly Vanadium 11595E steel - rifled 1 x 9” Right Hand Twist - fitted with an
A2 Flash Suppressor. A Picatinny Rail gas block with sling swivel and bayonet lug allows the attachment of a variety of Front
Sights. M4 dual heat shield Handguards complete the barrel. The machined aluminum flat top Upper Receiver is complete with
Bolt, Bolt Carrier Assembly, Charging Handle, Forward Assist, and Ejection Port Cover - ready for rear sight/optics of choice.
16” SRC M4 Profile Upper Receiver/Barrel
Assembly - Less Bolt Carrier
& Charging Handle
$430.00 - Part# UR16M4FT
16” SRC “BAN COMPLIANT” Upper Receiver/Barrel Assemblies for NY / NJ / CT / MA
Ban Compliant 16” SRC M4 Profile Upper
Part# UR16M4FTPBB
This M4 Barreled Upper Receiver Assembly from our SRC
Rifle is compliant with regulations for the States of CT, MA, NJ and NY. The accurate 16” M4 profile barrel is chrome lined and
machined from 4150 Chrome Moly Vanadium 11595E Steel with M4 feed ramps, rifled 1 x 9” RHT. The barrel includes a
permanently affixed A2 birdcage style compensator (shown at left), and its bayonet lug has been machined off. The Gas Block
is our Picatinny Rail type - ready for the addition of accessory front sights. The machined aluminum flat top Upper Receiver is
complete with Bolt, Bolt Carrier Assembly, Charging Handle, Forward Assist and Ejection Port Cover.
Ban Compliant SRC 16” M4 Profile Upper Rec./Bbl.
Assembly - Less Bolt Carrier, Charging Handle &
$460.00 - Part# UR16M4FTPB
20” Varmint Exterminator Upper Receiver/Barrel Assembly
Part# UR20FSSFTVB
$775.00
This superbly accurate Assembly - from our VEX-SS “Varmint Exterminator Rifle” - is ready for
the range or varmints. Precision machined from 416R Stainless Steel, it includes a matched bolt and carrier machined from
Carpenter 158 Steel which is machined to mate with the Compass Lake specification chamber for highest possible accuracy.
The barrel is matte finished to avoid reflective glare, and is fluted to reduce weight, increase barrel surface and add rigidity. A
Picatinny Rail Gas Block is included should you want to attach a front sight, as are 1/2” high "mini-risers” for the easy
attachment of a scope or optic. Button rifling is 1 turn in 8 inches - right hand twist for optimum accuracy with a wide range
of heavier .223 Rem. / 5.56mm NATO varmint bullets. NOTE: This assembly is in compliance with regulations in the States of
NY / NJ / CT / MA as it has no bayonet lug or flash hider.
Range-Ready HBC 16” Heavy Upper
Part# UR16A4B
Includes
Bolt Carrier Assembly, Charging Handle, A4 Carry Handle
This heavy barreled Upper Assembly is complete and ready to snap onto your Lower. A highly accurate 16” heavy profile
barrel - chrome lined and machined from 4150 Chrome Moly Vanadium 11595E steel is rifled 1 x 9” RHT. An A2 Flash
Suppressor and standard A2 Front Sight are fitted. The machined aluminum flat top Upper Receiver is complete with Bolt, Bolt
Carrier Assembly, Charging Handle, Forward Assist, Ejection Port Cover, and Removable A4 Carry Handle with 300 - 600 meter
Dual Aperture Rear Sight.
HBC 16” Heavy Upper Receiver/Barrel Assembly
- Less Carry Handle - $560.00
Part# UR16LHB
13
14.5” “SHORT BARRELLED” Upper Receiver/Barrel Assemblies (continued)...
THESE ASSEMBLIES MUST BE USED IN - OR WITH - A TITLE II RECEIVER (NFA REGISTERED) FOR LEGALITY.
14.5” M4 Upper Receiver/Barrel Assembly
Less Bolt Carrier & Charging Handle
$520.00 - Part# UR14M47A4
Includes A4 Carry Handle
14.5” M4 Profile Upper Receiver/Barrel Assembly
Less Bolt Carrier, Charging Handle
& A4 Carry Handle $425.00 - Part# UR14M47LH
Upper Receivers / Parts
AR15/M16 Flat-Top Upper Receiver Assembly - $155.00 - Part# URA-FT
Partially assembled with an Ejection Port Cover and Forward Assist Assembly, this
quality CNC machined Upper is 7075T6 Aircraft Aluminum finished in Hard Black
Anodize to a non-reflective matte surface for protection against corrosion. It features
an integral Picatinny Rail that will accept a wide variety of rear sights, optics, or the A4 Removable Carry Handle.
AR15/M16 Stripped Flat-Top Upper Receiver - $135.00 - Part# UR-FT
Build your AR15/M16 from a quality base. CNC Machined from 7075T6 Aircraft
Aluminum with an integral Picatinny Rail, this quality Upper with brass deflector is
finished in Hard Black Anodize for a non-reflective matte surface and protection
against corrosion. Ready for installation of an Ejection Port Cover Kit and Forward Assist Assembly.
Mini Scope Riser Block for Flat-top Receivers - $14.95 - Part# MR-01
Raises scope or optic above
the flat-top upper (purchase 2). Black anodize finished aluminum with screws (1 3/8” long - adds 1/2” height).
A4 Removeable Carry Handle - $110.00 - Part# 12951011
For versatility on Picatinny Rail Flat-Top Uppers, nothing beats the A4 Removable
Carry Handle. Clamp it on when carrying or using its Dual Aperture 1/2 M.o.A.
Elevation and Windage Adjustable 300 - 600 Meter Iron Sights or remove to attach
scopes or optics. Machined from Hard Anodized Aircraft Aluminum with Steel Thumb Nuts, Clamping Bar and Sight Parts.
Complete Charging Handle Assembly for AR15/M16 (A) - $24.95 - Part# 8448517
Machined from high quality 7075T6 Aircraft Aluminum, and Hard Black Anodize
finished, this complete Charging Handle Assembly includes the Latch and its Spring
(A)
and Spring Pin - ready to slide into your Upper Receiver.
(B)
Charging Handle Latch Only (B) - $3.50 - Part# 8448519
(C)
(D)
High quality steel Charging Handle Latch with locking tab - black phosphate finish.
Charging Handle Latch Spring Only (C) - $0.50 - Part# 8448520
Badger Tactical Latch for AR15/M16
High tensile strength spring steel wire for positive Latch function.
$19.95 - Part# TAC-LATCH
Latch Spring Pin Only (D) - $0.50 - Part# 8448521 1/16” x 1/4”
An extended latch for rapid
TacOps-1 Ambidextrous Charging Handle
operation of the charging
$74.95 - Part# 8448517-TACOPS-1
handle with right or left hand, with gloves, or in mud
and snow. Perfect for use with a scope, it replaces the
Developed to offer
standard latch. 8620 ordnance steel with parkerized Mil
ambidextrous operation and ease of use with large
Spec finish. In service with Marines, SEALs, Rangers,
scopes. "T” shaped handles extend for quicker grasp and
Special Forces and tactical units worldwide.
dual mode push button latch extends for easier right hand
operation from prone position. A 42% larger roll pin and heavier
Complete Charging Handle Assembly with a
stainless steel latch spring keeps it locked onto receiver. 7075 billet Badger Tactical Latch Installed...
aluminum with a black hard anodize finish. Made in U.S.A.
$42.95 - Part# 8448517-TAC
Round Forward Assist Parts Kit - $13.50 - Part# KIT-FWDASSIST-RD
Build a new Upper or renew worn parts. Includes black phosphate finished Forward Assist
(pre-assembled with Pawl, Detent, Spring and Pin), Forward Assist Spring, and Spring Pin.
Round Forward Assist Only (A) - $12.95 - Part# 9349086
Round Forward Assist Spring Only (B) - $0.50 - Part# 8448540
Round Forward Assist Spring Pin Only (C) - $0.50 - Part# MS16562-121
AR15/M16 Ejection Port Cover Parts Kit - $7.95 - Part# KIT-EPC
To build a new Upper, or replacing lost parts, this Ejection Port Cover Parts Kit includes
black phosphate finished Ejection Port Cover (with latch and spring loaded detent installed),
Ejection Port Cover Rod, Cover Rod "C” clip and high tensile strength coil spring.
Ejection Port Cover Only (A) - $5.95 - Part# 8448525
Ejection Port Cover Rod Only (B) - $1.50 - Part# 8448533
Ejection Port Cover Spring Only (C) - $0.50 - Part# 8448532
Ejection Port Cover “C” Clip Only (D) - $0.50 - Part# MS16632-3012
(A)
(C)
(B)
(A)
(B)
(C)
(D)
15
DUAL HEATSHIELD HANDGUARDS
P/N: DS4-HANDGUARD
BUFFER SPRING P/N: 9390022
FRONT
SIGHT
BASE
TELESTOCK
PLATE
P/N: 9390021
CARBINE GAS TUBE P/N: 1005-914-3504
WELD SPRING
P/N: 8448555
TELESTOCK KIT
P/N: KIT-TELESTK
CHARGING
HANDLE LATCH
P/N: 8448519
FORWARD ASSIST
SPRING PIN
FORWARD ASSIST
P/N: MS16562-121
SPRING
P/N: 8448540
CHARGING HANDLE
SPRING PIN
P/N: 8448521
CHARGING HANDLE SPRING
P/N: 8448520
BARREL EXTENSION
GAS TUBE SPRING PIN P/N: MS16562-106
P/N: 9349054-W2BE BARREL NUT
HANDGUARD CAP
P/N: 9349054BBLN P/N: HCAP-RDHVYM4
M4 PROFILE CHROME LINED 16” BARREL
4150 CHROME MOLY VANADIUM 11595E STEEL
BARREL ASSEMBLY w. M4 CUTAWAY
TELESTOCK
LOCKING RING
P/N: 9390020
SNAP RING
DELTA RING
P/N: MS16626-1137 P/N: 8448712
BUFFER RETAINER
P/N: 8448582
BOLT CATCH
P/N: 8448628
BUFFER RETAINER
BOLT CATCH SPRING PIN
SPRING
P/N: MS16562-119
P/N: 8448583
EJECTION PORT COVER
BOLT CATCH
BOLT CATCH PLUNGER
P/N: 8448525
PLUNGER
SPRING P/N: 8448633
P/N: 8448634
FORWARD ASSIST
ASSY. ROUND
P/N: 9349086
FRONT SIGHT TAPER PIN (2 REQUIRED)
P/N: 8448575
SLING SWIVEL
P/N: 8448571
SLING SWIVEL RIVET
P/N: 8448697
EJCT. PORT COVER SPRING
P/N: 8448532
EJCT. PORT
COVER ROD C-CLIP
P/N: MS16632-3012
EJCT. PORT COVER ROD
P/N: 8448533
FRONT SIGHT POST
P/N: 9349056
FRONT SIGHT POST DETENT SPRING
P/N: 8448574
Complete AR Rifles...
and Everything to Keep Them Complete.
TAKEDOWN PIN
P/N: 8448584
PIVOT PIN
DETENT SPRING
P/N: 8448586
PIVOT PIN
P/N: 8448621
PIVOT PIN
DETENT
P/N: 8448585
TAKEDOWN PIN TAKEDOWN
DETENT SPRING PIN DETENT
P/N: 8448586 P/N: 8448585
ALUMINUM
TRIGGER
GUARD ASSY.
P/N: 8448587
SAFETY SELECTOR AR
P/N: 9381367-AR
Made in
SAFETY DETENT
P/N: 8448631
SAFETY DETENT SPRING
P/N: 8448516
PISTOL GRIP WASHER
P/N: MS35335-61
PISTOL GRIP SCREW
P/N: AN501D416-18
DISCONNECTOR AR
P/N: 8448635-AR
DISCONNECTOR
SPRING
P/N: 8448594
TRIGGER
GUARD
SPRING PIN
P/N: MS16562-129
TRIGGER SPRING
P/N: 8448593
TRIGGER AR
P/N: 8448592-AR
HAMMER/TRIGGER PIN
P/N: 8448609
PISTOL GRIP
P/N: 9349127
16
© Windham Weaponry, Inc. 2013
“The Quality Goes In
Before The Rifle Goes Out”
FRONT SIGHT POST DETENT
P/N: 8448573
CHARGING HANDLE ASSEMBLY
P/N: 8448517
The U.S.A.
CRUSH WASHER
FOR A2 FLASH A2 FLASH
SUPPRESSOR SUPPRESSOR
P/N: 12991533 P/N: 9349051
CARBINE BUFFER
P/N: 1005-914-4578
a visual guide
to the ww-15 rifle
MAGAZINE CATCH
P/N: 8448638
MAGAZINE CATCH BUTTON
A4 CARRY HANDLE GROUP
P/N: 8448636
FIRING PIN
WITH 300-600 M REAR SIGHT
RETAINING
PIN
P/N: 12951011
MAGAZINES
P/N: 8448504 BOLT CAM PIN
30 / 20 / 10 / 5 ROUND MAGAZINE CATCH
P/N:
8448502
SPRING
GAS KEY SCREWS (2)
P/N: 8448637
EJECTOR SPRING
HAMMER W. J PIN AR
BOLT CARRIER KEY
P/N: 8448508
BOLT
P/N: 8448516
P/N: 9349110-AR
P/N: 8448506 GAS RINGS (3)
BOLT CARRIER
EJECTOR CARTRIDGE
P/N: KIT-GASRINGS
WITH KEY
P/N: 8448515
P/N: 8448505
EJECTOR SPRING PIN
HAMMER/TRIGGER PIN
P/N: MS16562-98
P/N: 8448609
BOLT ASSEMBLY COMPLETE
P/N: 8448509
HAMMER SPRING
EXTRACTOR SPRING INSERT
EXTRACTOR CARTRIDGE
P/N: 8448611
FIRING PIN-M16
P/N: 8448755-INSERT
P/N: 8448512
P/N: 8448503
EXTRACTOR SPRING
EXTRACTOR PIN
P/N: 8448755
M16 BOLT CARRIER ASSEMBLY
P/N: 8448513
EXTRACTOR “O”RING
P/N: 8448501
P/N: 8448755-ORING
For Parts Call Toll Free: 1-855-808-1888 — or Order Online: www.windhamweaponry.com
17
Windham Weaponry Barrel Kits, Barrels and Parts are all the highest quality we can produce. Barrel
blanks start as raw 4150 Chrome Moly Vanadium 11595E steel - the finest and most appropriate steel for
a gun barrel. After drilling, the button rifling process takes place. Most are rifled 1 turn in 9” - right hand
twist - which we have found to be the best compromise for the widest range of bullet weights. Rifling is
altered for specific applications: VEX-SS barrels are 1 in 8” twist for the generally heavier bullets used in
varmint hunting; some short LE barrels are done in 1 x 7” for stability in a short barrel.
After rifling, the barrel is lathe turned to the particular barrel profile, and hardened to Rockwell C26
- 33. A Chrome Lining is applied to the barrel and chamber (except the Stainless Steel VEX) as the chrome
finish offers easier cleaning, protection against corrosion and rust, and longest wear possible - lasting
thousands of rounds longer than non-chromed barrels. The chrome lining in the barrel and chamber also
adds a natural lubricity which improves chambering and extraction, and improves bullet velocity.
In final steps, steel barrels are finished in Black Manganese Phosphate to a rich matte black, non
reflective surface that also protects against rust and corrosion. The stainless steel VEX barrels are matte
finished to reduce reflection and improve hunting concealment.
Windham Weaponry Barrel Kits contain all necessary parts forward of the receiver - kit descriptions
will list exact contents. We also sell barrel “sub-assemblies”, that are basically the barrel only with
necessary parts that enable the home gunsmith to economically replace a worn barrel or change a barrel
configuration utilizing their existing handguards, flash hiders, etc.
MPC 16” Barrel Kit - $245.00
Part# KIT-BA16M4
This premium Barrel Kit from our "MPC” Rifle - 16” in length, turned with
the M4 profile, includes all parts forward of the Upper Receiver including
Barrel Extension (with M4 Feed Ramps), Barrel Nut, Delta Ring, Weld Spring,
Snap Ring, Gas Tube, Gas Tube Spring Pin, M4 Double Heatshield Handguards,
Front Handguard Cap, A2 Standard Sight Base with
Sling Swivel, Front Sight Post, Front Sight Detent,
Bayonet Lug and A2 Flash Hider with Crush Washer.
Machined from 4150 Chrome Moly Vanadium 11595E
Steel, Chrome lined in bore and chamber, and Black
Manganese Phosphate finished for protection against
rust and corrosion. Button rifled 1 turn in 9 inches right hand twist for optimum accuracy with a wide
range of .223 / 5.56mm ammunition.
MPC 16” Barrel Sub-Assembly - $215.00
Part# BA16M4
This M4 profile sub-assembly is perfect for replacing
an old, worn or inaccurate barrel. Machined from 4150
Chrome Moly Vanadium 11595E Steel, chrome lined for long wear and easy cleaning, button rifled 1 turn in 9” (RHT). The Black
Manganese Phosphate finish protects against rust and corrosion. Includes Barrel with M4 feed ramps, Front Sight Base
(installed with Front Sight Post, Detent, Detent Spring, Sling Swivel and Rivet), Barrel Nut, and Handguard Cap.
HBC 16” Heavy Barrel Kit - $235.00
Part# KIT-BA16HB
Our highly accurate 16” Heavy Barrel Kit includes all parts needed
for complete assembly. Machined from 4150 Chrome Moly
Vanadium 11595E Steel with a Chrome lining for long wear and easy
cleaning, this Heavy Profile barrel is .950“ diam. under
the handguards, and .745” straight from the sight base
forward. Button rifling is 1 turn in 9” (RHT), and finished
in Black Manganese Phosphate for protection against
rust and corrosion. Includes the Barrel Sub-Assembly
with M4 feed ramps, M4 Dual Heatshield Handguards,
Delta Ring, Weld Spring, Snap Ring, Gas Tube, Gas Tube
Spring Pin, Crush Washer, and A2 Birdcage Flash Hider.
HBC 16” Barrel Sub-Assembly - $205.00
Part# BA16HB
In Heavy Profile under the handguard area, and
turned straight from the sight base forward to the
threaded muzzle, this sub-assembly makes a great replacement or part of your new rifle build. 4150 Chrome Moly Vanadium
11595E Steel with a chrome lining and button rifling (1 turn in 9” RHT). Finished in Black Manganese Phosphate for protection
against rust and corrosion. This Barrel Sub-Assembly includes Barrel with M4 type feed ramps, Front Sight Base (installed with
Front Sight Post, Detent, Detent Spring, Sling Swivel and Rivet), Barrel Nut, Handguard Cap and Threaded Muzzle.
18
Highly accurate, and light weight, these components are from our "SRC” Rifle - similar to
SRC 16” Barrel Kit
the 16” MPC barrel but with a Picatinny Rail Gas Block attached (using taper pins). Mount a
$255.00
variety of accessory front sights on it or, leave it "bare” if you intend to use a scope. 4150
Part# KIT-BA16M4FT Chrome Moly Vanadium 11595E Steel with Chrome lining in bore and chamber for long wear
and ease of cleaning, Black Manganese Phosphate
finished. Button rifled 1 turn in 9” (RHT), for optimum
accuracy with a wide range of .223/5.56mm ammo.
This kit includes Barrel Extension (with M4 Feed
Ramps), Barrel Nut, Delta Ring, Weld Spring, Snap Ring,
Gas Tube, Gas Tube Spring Pin, M4 Double Heatshield
Handguards, Handguard Cap, Picatinny Rail Gas Block
with Sling Swivel, Bayonet Lug and A2 Flash Hider with
Crush Washer.
SRC 16” Barrel Sub-Assembly - $225.00
Part# BA16M4FT
This Sub-assembly from our SRC Rifle has the M4
profile with a Picatinny Rail Gas Block attached with
taper pins. Mount a variety of accessory front sights, or, leave it "bare” if you intend to use a scope. Barrel material is 4150
Chrome Moly Vanadium 11595E Steel, and it is chrome lined in both Bore and Chamber for long wear and ease of cleaning.
Button rifled 1 turn in 9“ (RHT) for optimum accuracy with a wide range of .223 / 5.56mm ammunition. Black Manganese
Phosphate finished, includes the Barrel Extension (with M4 Feed Ramps), Barrel Nut, Handguard Cap, Picatinny Rail Gas Block
with Sling Swivel, and Bayonet Lug. Muzzle is threaded 1/2” x 28 T.P.I. to accept a variety of flash hiders or muzzle brakes.
SRC 16” Heavy Barrel Kit - $245.00
Part# KIT-BA16FT
This Kit is much the same as the SRC M4 Kit above but substitutes
the 16” Heavy Profile Barrel. Includes a taper pinned Picatinny Rail
Gas Block. 4150 Chrome Moly Vanadium 11595E Steel with chrome
lining in Bore and Chamber - button rifled 1 turn in 9”
(RHT) - Black Manganese Phosphate finished. Includes
the Barrel Extension (with M4 Feed Ramps), Barrel Nut,
Spring Pin, M4 Double Heatshield Handguards,
Handguard Cap, Picatinny Rail Gas Block with Sling
Swivel, Bayonet Lug and A2 Flash Hider with Crush
Washer, Muzzle is threaded 1/2” x 28 T.P.I.
SRC 16” Heavy Barrel Sub-Assembly
$215.00 - Part# BA16FT
Like the SRC M4 Sub-Assembly above but with our
Heavy Barrel. Picatinny Rail Gas Block attached with taper pins, button rifled 1 turn in 9“ (RHT), Black Manganese Phosphate
finished. Includes Barrel Extension (with M4 Feed Ramps), Barrel Nut, Handguard Cap, Picatinny Rail Gas Block with Sling
Swivel, and Bayonet Lug. Muzzle is threaded 1/2” x 28 T.P.I. to accept a variety of flash hiders or muzzle brakes.
Our highly accurate Varmint Exterminator Barrel - with all parts forward
of the upper receiver - is precision machined of 416R Stainless Steel, and
button rifled 1 turn in 8” (RHT) for optimum accuracy with a wide range of
heavier .223 varmint bullets. The matte finish reduces reflection,
and fluting keeps weight to a minimum, increases barrel surface
heat loss and adds rigidity. A matched bolt of Carpenter 158
Steel is machined to mate with the
Compass Lake specification chamber for
utmost accuracy. A Picatinny Rail Gas Block
with set screws is included should you want
to attach a front sight. A rifle length gas
tube, gas tube spring pin, and our 6061
Sub-Assembly - $340.00
machined aluminum Free-Float Forend with
specialized barrel nut, rear knurled locking
ring and sling swivel / bipod stud are also
included.
VEX-SS 20” Barrel Kit - $415.00
Part# KIT-BA20FSS
VEX-SS 20” Barrel
Part# BA20FSS
Our Varmint Exterminator Barrel Sub-Assembly is precision turned from 416R Stainless Steel and includes a Carpenter 158
Steel Matched Bolt which is machined to mate with the Compass Lake specification Chamber for highest possible accuracy.
The barrel is matte finished to avoid any varmint spooking glare. It is fluted to reduce weight, increase barrel surface heat loss
and add rigidity. A Picatinny Rail Gas Block with set screws is included for front sight attachment. Button rifling is 1 turn in 8”
(RHT) for optimum accuracy with a wide range of the heavier .223 Rem. varmint bullets.
19
WINDHAM WEAPONRY “SHORT” BARRELS... NOTICE: These parts must be used in - or
with - a Title II Receiver (NFA Registered) for legality as required in accordance with Title 27
Code of Federal Firearms Regulations [Subpart B-Definitions (479.11) (a) thru (g) under
Firearms]. For any questions the Alcohol, Tobacco, & Firearms Bureau (local listings available
at: http://www.atf.gov/ ). A “short” barrel is any barrel less than 16” in length used on a rifle. These can
only be used on weapons registered as a full-auto, or legal short barreled rifle. Our Law Enforcement Sales
Manager may be able to answer other questions regarding this BATF restriction.
14.5” Short Barrel Kit
$245.00
Part# KIT-BA14M4-7
This premium 14.5”Short Barrel Kit has the M4 profile (designed for mounting a grenade
launcher) and must be used with a Title II receiver. It includes all parts forward of the Upper
Receiver: Barrel Extension (with M4 Feed Ramps), Barrel Nut, Delta Ring, Weld Spring, Snap
Ring, Gas Tube, Gas Tube Spring Pin, M4 Double Heatshield Handguards, Handguard Cap,
A2 Standard Sight Base with Sling Swivel, Front Sight Post, Front
Sight Detent, Bayonet Lug and A2 Flash Hider with Crush
Washer. Machined from 4150 Chrome Moly Vanadium 11595E
Steel, chrome lined in both bore and chamber, and Black
Manganese Phosphate finished for protection against rust and
corrosion. This barrel is button rifled 1 turn in 7” - right hand
twist (RHT) to stabilize bullets from 50 to 77 grains.
14.5” Short Barrel Sub-Assembly - $215.00 - Part# BA14M4-7
This short M4 Barrel - 14.5” in length - has the M4 turning for
mounting a grenade launcher, and the barrel extension has the M4 style
feed ramps. Also included are the Barrel Nut, Front Handguard Cap, A2
Standard Sight Base with Sling Swivel, Front Sight Post, Front Sight Detent, and Bayonet Lug. Machined from 4150 Chrome
Moly Vanadium 11595E Steel, chrome lined in both Bore and Chamber, and Black Manganese Phosphate finished for
protection against rust and corrosion. Button rifled 1 turn in 7“ (RHT) to stabilize bullets from 50 to 77 grains Muzzle is
threaded 1/2” x 28 tpi to accept a variety of flash hiders or muzzle brakes.
WINDHAM WEAPONRY “COMPLIANT” BARRELS... Have permanently affixed A2 birdcage style
compensators that make them legal for sale in the States of New York / New Jersey / Massachusetts and Connecticut.
The compensator is pinned on, and then welded over before finishing. Attempted removal will destroy the muzzle.
MPC 16” Compliant M4 Barrel Kit Similar to our "MPC” Barrel Kit with exception of a permanently
affixed A2 birdcage style compensator to comply with CT, MA, NJ and
$275.00 - Part# KIT-BA16M4-PB NY regulations. M4 profile turned with all parts forward of the Upper
Receiver: Barrel Extension (with M4 Feed Ramps), Barrel Nut,
Spring Pin, M4 Double Heatshield Handguards, Handguard
Cap, A2 Standard Sight Base with Sling Swivel, Front Sight
Post and Front Sight Detent. 4150 Chrome Moly Vanadium
11595E Steel, chrome lined bore and chamber, Black
Manganese Phosphate finish. Button rifled 1 in 9” (RHT).
SRC 16” Compliant M4 Barrel Kit - $285.00 - Part# KIT-BA16M4FT-PB
With its permanently affixed A2 birdcage style
compensator (complies with CT, MA, NJ and NY regulations),
this “SRC” barrel features a Picatinny Rail Gas Block (taper
pin attached) for mounting accessory front sights, or leave it
“bare” if you intend to shoot with a scope or optics. M4
profile with all parts forward of the Upper Receiver. Machined
from 4150 Chrome Moly Vanadium 11595E Steel, chrome
lined in bore and chamber and Black Manganese Phosphate finished. Button rifled 1 turn in 9” (RHT).
ALSO AVAILABLE: 14.5” M4 Barrel Kit with A2 Extended “Birdcage” Flash Hider - $275.00
Part# KIT-BA14M4-7-A2X - All parts forward of Receiver, Rifled 1 x 7, Pinned & Welded Extended Birdcage, 16” overall.
14.5” M4 Barrel Kit with Phantom Flash Hider - $275.00 - Part# KIT-BA14M4-7-PHAN5C2
- All parts forward of Receiver, Rifled 1 x 7, Pinned & Welded Phantom, 16” overall legal length.
14.5” M4 Barrel “Only” with A2 Extended “Birdcage” Flash Hider - $245.00 - Part# BA14M4-7-A2X
14.5” M4 Barrel “Only” with Phantom Flash Hider - $245.00 - Part# BA14M4-7-PHAN5C2
Windham Weaponry Picatinny Rail Gas Block Windham Weaponry has developed a solid steel Gas Block
with an integral Picatinny Rail to allow mounting the
$59.95 - Part# KIT-PICBLOCK accessory front sight of your choice, or leave it “bare”if you choose to shoot with a
20
scope or optics. Replaces your existing 3/4” internal diameter front sight/gas block. Slip on
fit is then tightened with supplied set screws. It has a pre-drilled gas path hole, gas tube hole
and gas tube spring pin hole, and includes the Windham Weaponry "WW” machined into
the front face. This rugged unit is machined from solid billet stock, bead blasted, and then
black manganese finished for a durable non-reflective surface.
Barrel Parts
Low Profile Gas Block - $45.00 - Part# GB-LOPRO-SI
These quality machined steel Gas
Blocks are lightweight, strong and small enough to use with almost any handguard. Mounted with set
screws on the bottom (if your barrel has nocorresponding "dimples”, some drilling/gunsmithing may
be required). Use Green Loctite on the gas block, and Red Loctite on the set screws when installing.
This gas block will fit on .750” diameter barrels. Black phosphate finished - made in the U.S.A.
Front Sight Parts Due to the difficulties of retro-fitting the A2 Front Sight Bases to
barrels, Windham Weaponry does not sell this part. All other A2 Front Sight parts are available.
A2 Square Front Sight Post
A2 Square Front Sight Post - .040” Taller Height
$4.95 - Part# 9349056
$4.95 - Part# 9349056-MOD
A2 Square Front Sight Post .260" in height / .070 "wide. Black
manganese phosphate finished steel.
Fits standard A2 Front Sight Base.
The .040” taller Sight Post is required in the A2 Standard Front
Sight Base when used with a Colt A4 Removable Carry Handle. It’s
also needed with the Diamondhead RS-10001 Rear Flip Sight.
Quality gun steel - finished in black manganese phosphate.
Front Sight Post Detent
$0.95 - Part# 8448573
Front Sight Post Detent Spring
$0.50 - Part# 8448574
Front Sight Taper Pin
$0.95 - Part# 8448575
This machined steel Detent
engages the notches on the Sight
Post to lock it at the desired
height when sighting in your rifle.
Provides pressure for the Front
Sight Post Detent to hold the
Sight Post in position. High
tensile strength spring steel.
The correct way to affix a Front
Sight Base to a barrel - two
required. Tapered machined steel
with black phosphate finish.
Delta Ring Kit for AR15 / M16
$10.95 - Part# KIT-DELTARING
Front Sling Swivel & Rivet
Rivet - $0.95 - Part# 8448697
Swivel - $2.95 - Part# 8448571
AR15/M16 standard front sling swivel for
the front sight base. Black phosphated steel
with rubberized coating for quiet operation. The 1/8” x 7/16”
black rivet is specifically sized to fit the A2 Front Sight Base.
Round Handguard Cap for .75” Bbl.
$2.95 - Part# HCAP-RDHVY
The Handguard Cap locks the front of the
carbine handguards onto the barrel so they
won't rotate or rattle. Stamped steel, with gas
tube hole - black manganese phosphate finish.
Gas Tubes for AR15/M16 Rifles & Carbines...
Rifle Length (20”+ Bbl.) $11.95 - Part# 8448567
CAR Length $11.95 - Part# 1005-914-3504
This kit includes a machined aluminum
Delta Ring, a spring steel Weld Spring, and
the steel Snap Ring that retains these pieces
on the Barrel Nut. Top quality, made in USA.
Individual Parts:
Delta Ring - $6.95 - Part# 8448712
Weld Spring - $4.50 - Part# 8448555
Snap Ring - $1.50 - Part# MS16626-1137
Barrel Nut for AR15/M16
$7.95 - Part# 9349054BBLN
Assembled before the barrel extension is
torqued, the barrel nut is the crucial link
between barrel assembly and upper receiver.
Highest quality steel - black manganese phosphate finish.
Gas Tube Spring Pin 5/64” x 5/16”
$0.50 - Part# MS16562-106
A2 Birdcage Type Muzzle Brake
$59.95 - Part# MB-A2-PB
High quality stainless steel - drilled with gas and spring pin holes, designed
to function perfectly in any AR15/M16. Choose the length to fit your barrel.
A2 Flash Hider for AR15/M16
$6.95 - Part# 9349051
Standard A2 "Birdcage” Flash
Patterned after the standard A2 Birdcage,
Hider with five venting slots on top and sides. Bottom is
it fits standard thread AR15/M16 barrels, and
closed to avoid a dust signature when shooting prone.
is shipped with a peel washer for proper port
High quality steel, threaded 1/2” x 28 T.P.I., with
timing. When pinned and welded on a 16” or longer
Black Phosphate finish. This Flash Hider should
barrel, it complies with regulations for use in NY, NJ, CT and MA.
be installed with a Crush Washer for proper
Machined steel with a black manganese finish.
"timing” (positioning) of gas venting slots.
< A2 Flash Hider Crush Washer - $2.95 - Part# 12991533
The Crush Washer is sold separately here:
Extended Length A2 “Birdcage” Flash Hider for AR15/M16 - $35.95 - Part# FS-A2X
This version of the A2 Bird Cage Flash Hider makes a 14.5” barrel a legal length of 16” when
pinned and welded over (one hole for pinning and welding located on the bottom), or it can be
threaded onto any standard 16“ barrel. Threaded 1/2” x 28 T.P.I., with Black Phosphate finish.
Overall length is 2 ¼”. Should be installed with a Crush Washer for proper port "timing”
Phantom Flash Hider - $34.00 The Phantom controls
Part# FH-PHANTOM-5C2 muzzle flash effectively with
Vortex Flash Hider
$59.95 - Part# FH-VORTEX
five longitudinal vents, and
reduces dust signature when
shooting prone. The grooved
base accepts training attachments and sound suppression
devices for LE / military personnel. Threaded ½” – 28 t.p.i.
- includes a crush washer for proper “timing”. High quality
steel with black manganese phosphate finish.
With specially angled helical flutes,
the Vortex effectively hides flash, and aligns exiting barrel gas to
improve accuracy. A base ring groove allows integration of Blank
Firing Attachments for LE trainers, and permits installation of
Smith Enterprise SEI Direct Connect Sound Suppressors.
Threaded ½” - 28 t.p.i. - no crush washer required. 8620 bar
stock - heat-treated and Parkerized matte black.
21
Lower Receiver Parts / Parts Kits
WINDHAM WEAPONRY does not sell Lower Receivers separately as the “Lower” is the
part of the weapon system that can only be sold to a Federally Licensed Firearms Dealer.
Complete Lower Receiver Parts Kit for AR15
$68.95 - Part# KIT-LOWER-AR
This complete Windham Weaponry Lower Receiver Parts Kit will give you
everything needed to build up a stripped Lower, or keep your AR functioning
in the toughest conditions. All highest quality parts, this kit includes: AR
Hammer with J-Pin; Hammer Spring; AR Safety Selector Lever; Safety Detent;
Safety Detent Spring; Bolt Catch; Bolt Catch Spring Pin; Bolt Catch Plunger;
Bolt Catch Spring; Magazine Catch; Magazine Catch Spring; Magazine Catch
Button; Takedown/Pivot Pin Detents (2); Takedown/Pivot Pin Springs (2); Pivot
Pin; Takedown Pin; AR Trigger; Trigger Spring; AR Disconnector; Disconnector
Spring; Trigger Guard (Aluminum); Trigger Guard Spring Pin; Hammer/Trigger
Pins (2); Pistol Grip; Pistol Grip Screw; Pistol Grip Washer; Buffer Retainer;
Buffer Retainer Spring.
Aluminum Trigger Guard Parts Kit for AR15/M16 - $7.25 - Part# KIT-TRIGGUARD-ALUM
If you broke the old plastic trigger guard on your AR in last winter’s cold, or just
want to upgrade to the strength and beauty of an aluminum piece, this is the kit.
Includes a finely machined black anodized aluminum trigger guard with a spring
loaded detent pin already installed. A new steel ¼ X 5/8 spring pin is included.
(B)
(A)
Aluminum Trigger Guard Only for AR15/M16 (A) $6.95 - Part# 8448587
Trigger Guard Spring Pin Only for AR15/M16 (B) $0.50 - Part# MS16562-129
Magpul Enhanced Trigger Guard - $19.95 - Part# 8448587-MP-ENHANCED
This black anodized aluminum drop-in replacement for the AR15/M16 weapons platform
features a shallow "V" shape for better use with gloves in tactical shooting or cold weather. It is
non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger
guard. Mounting hardware - a spring pin and special long allen head screw is included.
Fire Control Parts Kit for AR15 - $44.95 - Part# KIT-FIRECONTROL-AR
Here are all the critical Windham Weaponry Fire Control Parts Kit necessary to
keep your AR range-ready. Highest quality parts includes: AR Hammer with J-Pin;
Hammer Spring; AR Safety Selector Lever; AR Trigger; Trigger Spring; AR
Disconnector and Disconnector Spring. Essential spares for all emergencies.
(C)
(G)
(A)
AR15 Hammer with J-Pin Only (A) $15.95 - Part# 9349110-AR
AR15 Hammer Spring Only (B) $1.50 - Part# 8448611
AR15 Disconnector Only (C) $5.95 - Part# 8448635-AR
AR15 Disconnector Spring Only (D) $0.50 - Part# 8448594
AR15 Trigger Only (E) $12.95 - Part# 8448592-AR
AR15 Trigger Spring Only (F) $0.95 - Part# 8448593
AR15 Safety Selector Only (G) $9.95 - Part# 9381367-AR
(D)
(F)
(E)
(B)
POF Ambidextrous Safety for AR15/M16 - $24.95 - Part# AMBI-SFTY-AR
Through our partnership with Patriot Ordnance, we can now offer their high quality Ambidextrous Safety.
These black nitride finished steel parts are machined to close tolerances for crisp operation from either side of the receiver. An
easy installation for any AR15 or M16 that will enhance the safe handling of your rifle. Made in U.S.A.
Safety Selector Detent for AR15/M16 - $0.95 - Part# 8448631
Safety Selector Detent Spring for AR15/M16 - $0.50 - Part# 8448516
Magazine Catch Parts Kit for AR15/M16 - $7.95 - Part# KIT-MAGCAT
New original Windham Weaponry parts to replace the malfunctioning magazine catch on your rifle
- a black phosphate finished Magazine Catch with a black anodized aluminum Magazine Catch
Button and a new, high tensile strength coil spring - easily installed to properly retain the magazine.
(A)
Magazine Catch for AR15/M16 Only (A) $4.95 - Part# 8448638
Magazine Catch Button Only (B) $3.50 - Part# 8448636
Magazine Catch Spring Only (C) $0.50 - Part# 8448637
(B)
(C)
Hammer/Trigger Pins for AR15 - $1.25 ea. - Part# 8448609
Black finished, machined Steel Pins to hold either the Hammer or Trigger in the Lower Receiver. Two
are required per rifle (sold individually) the same part is used for both applications.
Buffer Retainer for AR15/M16 (A) - $1.50 ea. - Part# 8448582
Buffer Retainer Spring for AR15/M16 (B) - $0.50 - Part# 8448583 (A)
See Catalog center spread - Pages 16/17 - to identify where any of these parts are used in the AR15/M16 rifle.
22
(B)
Lower Receiver Parts / Parts Kits
Takedown Pin for AR15/M16 (A) - $3.95 - Part# 8448584
The Take Down Pin locks the Upper & Lower Receivers together, and is held "captive” within the (A)
Lower by its spring tensioned detent to avoid loss. Machined steel with black phosphate finish.
Pivot Pin for AR15/M16 (B) - $3.95 - Part# 8448621
The black phosphate finished steel Pivot Pin acts as the “hinge” between the Upper and
Lower and is locked within the Lower Receiver by its spring tensioned detent to avoid loss.
(B)
Takedown & Pivot Pin Detent for AR15/M16 (C) $0.50 - Part# 8448585
(D)
Takedown & Pivot Pin Detent Spring (D) $0.50 - Part# 8448586
(C)
Two Detents and two Detent Springs are required in the Lower Receiver - the same respective parts are used for both
applications. They help retain and position both the Take Down & Pivot Pins in the Lower Receiver.
Bolt Catch Parts Kit for AR15/M16 - $9.95 - Part# KIT-BOLTCAT
These high quality Windham Weaponry parts will restore your rifle’s Bolt Catch operation to new
standards. The steel Bolt Catch, and Bolt Catch Plunger are in black phosphate finish, and the high tensile
strength Bolt Catch Bolt Catch for AR15/M16 Only (A) $7.95 - Part# 8448628
Plunger Spring and new Bolt Catch Spring Pin Only (B) $0.50 - Part# MS16562-119
Steel Spring Pin will
Bolt Catch Plunger Only (C) $1.95 - Part# 8448634
provide long life.
(A)
(C)
(B)
(D)
Bolt Catch Plunger Spring Only (D) $0.50 - Part# 8448633
A2 Pistol Grip Parts Kit for AR15/M16 - $6.50 - Part# KIT-PISTOLGRIP-A2
(B)
This standard A2 Black Pistol Grip features checkered side panels, forward finger ridge and serrated
back strap. Molded from a Nylon 6/6 resin enhanced to improve toughness, impact resistance and heat
stability, the grip mounts easily onto the Lower Receiver with a black phosphated Allen Head Pistol
Grip Screw and External Tooth Lock Washer (supplied). Use a long 3/16" Allen wrench for installation.
A2 Black Plastic Pistol Grip Only (A) $5.95 - Part# 9349127
A2 Pistol Grip Screw Only (B) $0.95 - Part# AN501D416-18
A2 Pistol Grip Toothed Washer Only (C) $0.50 - Part# MS35335-61
(C)
(A)
POF Drop In Trigger/Hammer Assembly for AR15 - $189.95 - Part# 8448592-1STAGE
This high quality assembly from Patriot Ordnance easily drops into your receiver to replace the
existing trigger, hammer, disconnector and springs. The black nitride finished steel components
are permanently assembled into a red anodized block of solid aircraft aluminum to offer a crisp
single stage trigger pull and durable longevity. Average "pull weight” of this trigger assembly is
4.5 to 5 lbs., and included with the kit are a hammer and trigger pin and "lock plates” that mount
on the outside of the lower receiver. The supplied Allen Head screws are Loctite treated so the
hammer and trigger pins won’t "walk out” under fire. Made in U.S.A.
CMMG 2-Stage Trigger Kit for AR15/M16 - $119.95 - Part# 8448592-2STAGE-C
This high quality drop-in trigger/hammer system requires no gunsmithing to give your small-pin
AR-15 a rugged, reliable trigger. CMMG custom grinds 10 separate contact surfaces on the trigger,
disconnector, and hammer for a crisp, precise, consistent two-stage pull. Each trigger is function
tested at the factory, brass bushings reduce friction for an ultra-smooth pull and fast lock time. A
rounded, low mass hammer further speeds lock time and reduces wear on contact surfaces, and
trigger pull weight is approximately 5 to 7.5 lbs. Manufactured of black oxide finished steel with
brass bushings. Standard weight trigger and hammer springs are included, and this kit will work
with aftermarket reduced-power springs. The CMMG Two Stage Trigger Kit works with small pin
(.154” diameter) AR-15 Rifles and .308 Mk3 Rifles - also functions well in .22 LR conversions.
Most Wanted Parts Kit for AR15/M16 - $14.95 - Part# KIT-MOSTWANTED
Here are all those critical little parts that seem to go missing when you’re working on your
rifle - the ones that pop out of sight under the bench - disappear somewhere into the toolbox you know what we mean. Included in the "Most Wanted Kit” are: Pivot Pin Detents (4); Pivot
Pin Detent Springs (4); Safety Detents (2); Safety Detent Springs (2); Firing Pin Retaining Pins (2);
Buffer Detents (2); Buffer Detent Springs (2); Extractor Springs (2); Extractor Spring Inserts (2);
Extractor O-Rings (2). Never be troubled by the loss of critical "Most Wanted Parts” again!
Field Repair Kit for AR15/M16 - $34.95 - Part# KIT-FIELDREPAIR
This Kit is designed to provide every part you would need to keep
your rifle fully functional in the field - the perfect emergency
selection to stow in your rifle case! All are top quality Windham
Weaponry parts including: an M16 Firing Pin; a Firing Pin Retaining
Pin; Bolt Cam Pin; Extractor Cartridge; Extractor Pin; Extractor
Spring; Extractor Spring Insert; Extractor O-Ring; a set of 3 Bolt Gas
Rings; Hammer and Trigger Springs; Disconnector Spring; Hammer
and Trigger Pins; a Front Sight post (taller .040” height); an A1/A2
Front Sight Adjusting Tool and a CP-02 Chamber Plug/Safety Tool.
Never be without that critical part to keep your rifle firing!
23
Magazines / Magazine Accessories
.223/5.56mm 30 Round Magazine for AR15/M16 - $19.95 - Part# 8448670
The Windham Weaponry 30 Rd. Magazine is manufactured to the highest possible standards to offer you the
utmost in reliability, performance and durability. They incorporate the best Magpul® Gen III self leveling
follower featuring a four way anti-tilt design with spring stabilizers on top of a 17-7 PH stainless steel spring.
The 6061-T6 aluminum magazine box is black Teflon® coated inside and outside. A Windham Weaponry Logo
stamped base plate is removable for cleaning. Made in USA.
Due to state regulations this magazine cannot be shipped to California, District of Columbia, Maryland,
Massachusetts, New Jersey, New York, or Hawaii.
.223/5.56mm 20 Round Magazine - $19.95 - Part# 8448670-20
Like the 30 Round above, the Windham Weaponry 20 Rd. Magazine offers reliability,
performance and durability. With a Magpul® Gen III self leveling follower, four way anti-tilt
design and 17-7 PH stainless steel spring, this 6061-T6 aluminum magazine box is black
Teflon® coated inside and outside. A Windham Weaponry Logo stamped base plate is
removable for cleaning. Made in USA.
Due to state regulations this magazine cannot be shipped to California, District of
Columbia, Maryland, Massachusetts, New Jersey, New York or Hawaii.
.223/5.56mm 10 Round Magazine for AR15/M16 - $19.95 - Part# 8448670-10
.223/5.56mm 5 Round Magazine for AR15/M16 - $19.95 - Part# 8448670-5
While Windham Weaponry 10 Rd. Magazines and 5 Rd. Magazines are similar in appearance, they still have
all the reliability, performance and durability of their higher capacity brothers. Magpul® Gen III self leveling
followers - 17-7 PH stainless steel springs - 6061-T6 aluminum boxes with black Teflon® coating inside and out,
and the Windham Weaponry Logo stamped on a removable base plate for easy cleaning. Made in USA.
Magpul PMAG 30 Round Magazine - $14.95 - Part# 8448670-PMAG
The Magpul PMAG is a 30-round 5.56x45 NATO (.223 Rem.) AR15/M16 compatible magazine. It features
an advanced impact resistant polymer construction, a pop-off Impact/Dust Cover for storage, and an easy
to disassemble design with a flared floorplate for positive magazine extraction from pouches. The PMAG
30 utilizes a resilient stainless steel spring for corrosion resistance and an anti-tilt, self-lubricating
follower for increased reliability. This high quality magazine has been updated with a new body ribbing
design which allows for better compatibility with aftermarket mag couplers, and a new follower which
provides smoother loading with military stripper clips. Its Impact/Dust Cover can be snapped onto the
floorplate when not in use to prevent possible loss. Made by Magpul in the U.S.A.
Due to state regulations this magazine cannot be shipped to California, District of Columbia,
Maryland, Massachusetts, New Jersey, New York or Hawaii.
Magpul PMAG 20 Round Magazine - $13.95 - Part# 8448670-20-PMAG
The Magpul PMag 20-round polymer magazine for 5.56x45 NATO (.223 Rem.) is
constructed from advanced polymers with superior impact resistance and light weight. It fits all AR15/M16
rifles, and features advanced impact resistant polymer construction and a straight body to keep a low
profile in the rifle. A controlled-tilt follower keeps ammo feeding consistently, and a high quality stainless
steel spring ensures proper tension. Also included is a pop-off Impact/Dust Cover to protect the feed lips
from impacts and debris while in storage, and it can be snapped onto the floorplate when not in use to
prevent possible loss. The magazine body’s textured finish and flared floorplate improved handling over
standard magazines - the flared floorplate offers positive magazine extraction from pouches, and the design
of the floor plate offers simple disassembly using the impact cover or a punch for cleaning and maintenance.
Made in U.S.A.
Due to state regulations this magazine cannot be shipped to California, District of Columbia, Massachusetts,
New Jersey and New York, Hawaii.
Mission First Magazine Coupler for AR15/M16 - $11.95 - Part# MAG-CPLR-MFT
This molded lightweight polymer unit joins two magazines together to increase ammunition capacity.
It saves reloading time, and won't scratch or deform magazines. Magazines are held securely by two
tightening screws in the center of the unit. Made in the U.S.A by Mission First Tactical.
Blackhawk Telestock Magazine Pouch - $24.95
Part# MAGPOUCH-TELE-BH-BLK
A high quality Magazine Pouch that is designed to strap
onto the Telestock of the M4 type Carbine, this Blackhawk
Buttstock Mag Pouch features an adjustable closure flap to
accomodate 20 or 30 Round magazines. Sewn of heavy, 1000
denier abrasion resistant nylon and webbing, its dimensions
are 3”W x 4 1/8”H x 1”D.
(The magazine shown in the photo is not included.)
24
(Magazines shown are not included.)
Buttstocks & Buttstock Parts
Complete 6 Position Telestock Kit for AR15/M16
$69.95 - Part# KIT-TELESTK
(A)
This high quality Telestock Kit includes the Stock with molded-in W-W
logo and Locking Latch, 6 Position Receiver Extension, the Locking Nut
and Positioning Plate, Rear Sling Loop, high tensile strength Action
Spring, and standard CAR Buffer with aluminum body and solid weights.
CAR Length Buffer Spring Only (A) - $3.95 - Part# 9390022
Wound from high tensile strength spring steel, the Carbine Length
Buffer Spring is sized to fit within any M4 type carbine length buffer tube.
It provides the resilience to push the Buffer and Bolt Carrier forward in the
action cycle while at the same time dampening the recoil.
Carbine Buffer Only (B) - $12.95 - Part# 1005-914-4578 2.96 oz.
Heavy Carbine Buffer - $24.95 - Part# 8448730B-M
(B)
(C)
(D)
Slows the cycle rate in the AR15/M16 for improved reliability and
reduced recoil. H-Buffer (marked H on the end) weighs 3.76 oz.
Ambidextrous Telestock Endplate for
AR15/M16 - $9.95 - Part# ENDPL-AMBI
Telestock Locking Nut Only (C) - $5.95 - Part# 9390020
A replacement endplate for standard
telestocks offering solid mounting
points on either left or right side of the
carbine for single point or other slings.
Made of stamped steel with black
manganese phosphate finish.
Machined steel with a black phosphate finish. Tighten with Armorer’s
Wrench to avoid damage. See Gunsmithing Section in this catalog.
Telestock Plate Only (D) $4.95 - Part# 9390021
Stamped steel plate correctly positions Telestock and prevents any
rotation as the stock is mounted onto the Lower Receiver. Stamped &
machined steel with a black phosphate finish, for all AR15 or M16s.
Nonadjustable Tele-Style Stock Kit for use in States
of NY, NJ, CT, MA - $69.95 - Part# KIT-TELESTK-FIXED
This kit contains all the “Telestock” parts in a Fixed Length version to comply
with regulations in NY, NJ, CT & MA. It installs just like a regular telestock.
Includes the Receiver Extension, Locking Nut and Receiver End-plate, Rear
Sling Loop, a stainless steel Action Spring, and a CAR Buffer with aluminum
body and solid weights.
A2 Solid Buttstock for AR15/M16 - $64.95
Part# STK-STDKIT
This A2
solid stock
with storage
compartment is
great for building a
varmint rifle or replacing a
telestock. Includes a rifle length stainless
steel action spring, a standard buffer, the A2
standard receiver extension, an A2 stock spacer and screw,
and "trapdoor” stock with serrated buttplate and sling loop.
Rifle Length Skeleton Stock Kit for AR15/M16
$119.95 - Part# STK-SKELKIT
Comfortable and lightweight, this rifle length stock kit will
replace your telestock or standard stock and includes all
necessary parts from the receiver back. A neoprene sleeve
offers a great cheekweld for left or right handed shooter, and
the sling swivel can be mounted forward on either side, or at
the bottom of the buttplate frame. A molded rubber buttplate
absorbs recoil and won’t slip on your shoulder.
Rubber Telestock Buttpad
$9.95 - Part# BUTTPAD-6POS
Makes the telestocked Carbine more
comfortable and "non-slip” at the same
time. This molded rubber buttpad is
designed to fit most 6 position telestocks
with a simple slip-on fit. Black rubber,
made in the U.S.A.
CAR Skeleton Stock Kit for AR15/M16
$119.95 - Part# STK-SKELKIT-CAR
A carbine length version of the Ace Skeleton Stock. A
rugged aluminum and tubular steel frame mounts to the CAR
length aluminum receiver extension and a high density
neoprene foam tube slips over the black anodized receiver
extension to offer a comfortable check weld for left or right
handed shooters. Includes molded rubber buttpad, sling
swivel (mounts forward ambidextrously or at the bottom of
the buttplate frame), quality CAR Buffer and Buffer Spring.
Complete with kit assembly instructions - Made in U.S.A.
25
Buttstocks & Buttstock Parts
Mission First BULS Telestock for AR15/M16 - $109.95 - Part# STK-BULS-BLK
Mission First Tactical’s BULS - Battlelink™ Telestocks offer features
that will make your old tele obsolete. Its a slide-on replacement for
any commercial buffer tube (1.168” diam.), and offers quick
target acquisition, reduced operator strain and accurate shot
placement. Its angled rubber buttpad makes for quick
shouldering of the weapon - even with body armor on. Two quick
detach sling mounting points afford flexible attachment of any type of
sling. The buttpad flips down to open a waterproof battery / small parts
compartment fitted with customizable quiet foam storage block with a quick
access tab. The BULS stock is molded from reinforced, super tough polyamide
from DuPont's Military Plastic Division. Made in U.S.A. by Mission First Tactical.
MFT BULS Stock
storage compartment
open.
Mission First BUS Telestock for AR15/M16 - $109.95 - Part# STK-BUS-BLK
The Mission First Tactical BUS - Battlelink™ Stock is the next
evolution of the battlefield telestock. Molded of reinforced
polyamide from DuPont's Military Plastic Division, it fits all
standard commercial (1.168” diam.) buffer tubes. Features
include a flip-down, waterproof buttpad storage compartment
for batteries and small parts in a customizable foam storage block
MFT BUS Stock
with a quick access tab. It accepts any type of sling configuration, and
storage compartment
will mount custom accessories like a GPS unit. This stock reduces operator
open.
strain and fatigue, increases effectiveness, target acquisition and accurate
shot placement. The angled non-slip buttpad allows faster presentation with
body armor on, and two quick detach sling mounting points are positioned for flexible sling mounting. Made in the U.S.A.
Mission First E-Volv (E2) Telestock Cheekpiece
$29.95 - Part# STK-CKPIECE-MFT
The Mission First Tactical E-Volv (E2) Telestock Cheekpiece offers a solid
cheekweld for either right or left-handed shooters, and includes two
removable battery "sleds" (compartments). Mounting components feature
a Sling Slot, and QD Sling Mounting Point, to allow attachment of various
tactical slings. Also included are 2 sets of screws and an Allen Wrench for
installation. Molded of lightweight polymer - made in the U.S.A. Faded
telestock image shows cheekpiece as mounted (telestock is not included).
Magpul MOE
Adjustable Stock - $59.95 - Part# STK-MOE-BLK
The Magpul MOE (Magpul Original Equipment) Stock is part of their line of
accessories designed to provide a high-quality, economical alternative to standard
weapon parts. The MOE line distinguishes itself with simplified features, but maintains
Magpul’s engineering and material quality. The Magpul MOE Stock is a drop-in replacement
buttstock for AR15/M16 carbines using commercial-spec sized receiver extension tubes. Designed
for light, fast action, the streamlined A-frame profile avoids snagging and shields the release latch to
prevent accidental activation. An extended 0.55" rubber butt-pad is included to provide positive shoulder
purchase, and accommodates the longer, slanted back common to most commercial-spec tubes. Made in U.S.A.
Pistol Grips / Forends & Parts
See Page 23 for Standard
A2 Pistol Grip Kit & Parts
ERGO SureGrip for AR15/M16 - $26.95 - Part# 9349127-ERGO-AMBI
This comfortable, ambidextrous, ergonomically designed replacement grip for the AR15/M16
features smooth finger groves, an upper rear extension that supports the web of your hand, and a superior
textured finish that minimizes slip with either bare or gloved hands. The Suregrip has an overmolded
rubber surface to offer a little "give”. An interior storage compartment offers space for small parts or
tools, and is sealed with a molded rubber grip plug. A bonus feature is the Ergo "Gapper” - included
to fill the gap between the receiver (at the rear of the trigger guard) and the grip to offer knuckle
cushioning and a more finished look to your rifle. Installation utilizes your existing grip screw and
washer. Made in the U.S.A.
ERGO Tactical Deluxe Pistol Grip - $59.95 - Part# 9349127-ERGO-TAC
With it’s unique "palm shelf”, this comfortable, ambidextrous grip offers smooth finger groves and a
heavier tactical design with rear upper hand web support. Its highly textured finish minimizes slippage for
bare or gloved hands and the palm shelf (adjustable for height) stabilizes your grip for improved trigger
pull, rifle control and accuracy. The Tactical Deluxe grip is molded of material that is virtually impervious
to oils and solvents - made in the U.S.A.
26
Magpul MOE Pistol Grip for AR15/M16 - $20.95 - Part# 9349127-MOE-BLK
Tactile comfort, and durability in a quality economical, easily installed upgrade for the standard AR15/M16/M4
pistol grip - the ergonomic design combines aggressive texturing with storage core capability. Rugged one-piece
reinforced polymer construction provides durability, and the MOE Grip accepts optional storage cores for gear
stowage. A basic grip cap is included as well as all mounting hardware. Made in the USA by Magpul.
Hogue Overmolded Pistol Grip - $23.95 - Part# 9349127-HOGUE
With a palm swell, finger grooves and soft rubber molded over a durable fiberglass core, the
Hogue Overmolded Pistol Grip improves the comfort of your AR15 like no other accessory grip. Its an easy
replacement for the standard grip, and the unique texture ensures a solid, non-slip grip under any conditions.
Mission First Tactical Engage™ Pistol Grip - $34.95
Part# 9349127-MFT-ENGAGE The MFT Engage Pistol Grip
provides ergonomic comfort for any hand with a set of 6 panels for front and rear that vary the
number of finger swells and the thickness of the backstrap for a custom fit. The grip core
includes a watertight storage compartment with foam storage block to diminish parts rattle.
Molded extensions cover that uncomfortable “receiver gap”. Made in the USA, and designed
for the M16/M4/AR15/HK416. Manufactured by Mission First Tactical with lifetime warranty.
CAR Double Heatshield M4 Type Handguard
These are the heavyy
$19.95 - Part# DS4-HANDGUARD
duty, oval shaped M4 Carbine typee
Handguards, featuring dual aluminum heatshields, and are molded of heavy black plastic..
The mirror image design allows either piece to be fitted - top or bottom - on the rifle.
Magpul MOE CAR Length
Handguard Set for AR15/M16
$29.95 - HGD-MOE-CAR-BLK
Fits any Carbine barrelled AR15/M16. Installs into front handguard cap and rear delta
ring. Light weight (6.85 oz.), with slots at 2, 6, and 10 o'clock positions to attach optional
Picatinny rail sections, and other accessories for mounting tactical lights, slings, grips, etc. Relieved area at
the top rear accommodates many overhanging optic mounts. Reinforced, heat-resistant polymer
construction with integral aluminum heat shield for durability without the weight of an aluminum rail hand guard. Front
extensions and lip protects operator from hot front sight burns. This set is compatible with most piston-driven gas systems.
Windham Weaponry Tubular Aluminum
Free-Float Forends for AR15/M16
Rifle - $74.95 - Part# HGD-ASTD-A
Carbine - $64.95 - Part# HGD-ACAR-A
These superbly machined, ultralight forend assemblies add a custom look and a
comfortable grip to rifle or carbine. 6061 Aluminum tube is knurled and grooved for a
solid grip, and slotted vents all around dissipate barrel heat. The tube threads onto the
supplied barrel nut which turns onto the Upper Receiver and is drilled for the gas tube.
A rear knurled locking ring allows for final tube rotation so the supplied sling swivel/bipod stud will be correctly positioned. All
parts are finished in hard black anodize. Rifle weight is 13 oz. / length: 12.5”. CAR weight is 8 oz. / length: 7 1/8”.
Mission First Tactical 2-Piece Picatinny Rail Handguard Set
$124.95 - Part# HGD-MFT-CAR-2PC
This 6061 aluminum AR-15 Carbine Integrated Rail Forend System is a drop in,
screwless installation - fits the standard delta ring and handguard cap. Four Picatinny
Rails provide a secure platform for mounting any accessories. A continuous top rail
eliminates the gap between the receiver and rail. Overall length is 7 inches. Finished in
hard coat anodize. As this set fits tight, we recommend our handguard removal/installation tool to help with installation
(available on our website - Part #HGD-TOOL). Made in the USA, with a Lifetime Warranty from Mission First Tactical.
Diamondhead 2-Piece Aluminum CAR Handguard - $109.00 - Part# HGD-DH-CAR-2PC
Diamondhead’s V-RS Modular Drop-In Handguard platform offers forend
versatility for the M4 with almost limitless accessory configuration. The 2 piece
design splits horizontally - mounts to delta ring and handguard cap like standard
handguards. Add more side rails as additional accessories are needed (see
Diamondhead Rails below). Diamond shaped vents (proprietary to this Windham
Weaponry version) cool the barrel under rapid fire. The full length upper rail is in Mil. Std. 1913 Picatinny rail dimensions.
Construction is durable Type III anodized 6061 T6 aluminum, and it fits all M4/AR15/M16 variants. Made in the U.S.A.
Diamondhead Accessory Rail Segments... Fit Diamondhead’s V-RS
9” - $26.00 - Part# HGD-DH-RAIL-9 Modular Drop-In Handguard above or
the V-RS Free-Float Forend (next page). Mil. Std.
7” - $22.00 - Part# HGD-DH-RAIL-7 1913 Picatinny rail dimensions - anodized Mil.
2” - $15.00 - Part# HGD-DH-RAIL-2 Spec. Type III 6061 T6 aluminum. Hex head screws included.
27
Diamondhead V-RS Free-Floating Rifle Forend - $159.00 - Part# HGD-DH-FF-10
The Diamondhead V-RS Free-Floating Rifle Forend is
designed to give a factory installed appearance to your
rifle. It requires removal of both delta ring and factory
barrel nut and replacement of the front sight with a low
profile gas block. The V-RS kit includes a proprietary replacement barrel nut that allows for easy installation, and elimination
of barrel nut timing issues. Multiple diamond shaped vents (proprietary to this Windham Weaponry version) keep your barrel
cool. It is pre-dilled and tapped for Diamondhead’s accessory rail segments (see below) when you want to add additional
accessories, lights, etc. Length: 10.25”, machined from Mil. Spec. Type III anodized 6061 T6 aluminum. Made in the U.S.A.
ERGO 7 Slot and 18 Slot Low Profile Picatinny Rail Covers...
Protect, cover and smooth Picatinny rails with these molded black plastic rail covers. Low profile design
makes rifle handling comfortable while protecting the critical rail profile. Reduces snagging on clothing
and gear. Can be trimmed to fit around mounted accessories, lights or grips. Sold individually - the 2”
long cover (A) fits over 7 slots; the 7” long cover (B) fits over 18 slots.
(A)
ERGO 7 Slot Rail Cover - $4.95 - Part# HGD-RAILCOVER-LADDER-2
ERGO 18 Slot Rail Cover - $8.50 - Part# HGD-RAILCOVER-LADDER-7
(B)
Mission First Tactical EvolV™ 2.2” Picatinny Rail - $9.95 - Part# HGD-MFT-RAIL-2
2.2” long Picatinny rail segment attaches to 6 or 7 vent hole handguards without modifications.
(mounting screws through two vent holes) to add a mounting point for a vertical grip, flashlight or
other accessory. Molded of rugged plastic, it’s slight wedge shape aligns the rail surface perfectly with the barrel/bore.
Mission First React Short Foregrip for AR15/M16 Magpul RVG Forend Grip for Picatinny Rails
$24.95 - Part# VGRIP-MFT-SHORT
$24.95 - Part# VGRIP-RVG-BLK
Fits any AR15/M16 Picatinny Rail to offer
a non-slip grip. Helps stabilize your rifle in
rapid fire and offers faster target acquisition. It
features a water tight, battery or small parts
storage compartment with customizable foam
storage block to reduce rattle of contents.
Storage compartment door has a flat, non-slip
bottom which aids in supported firing positions.
Weight: 2 ounces / Height: 3.9” Made in the U.S.A.
Fits Picatinny railed handguards as a
traditional vertical grip, but is also
optimized for the "thumb break method"
of shooting taught by Magpul Dynamics.
Includes mounting hardware plus a universal
mounting rail segment for custom fitting to
many factory plastic hand guards. Durable
reinforced polymer plastic with an aggressive
textured surface for positive weapon control.
Magpul Angled Vertical Foregrip - $34.95 - Part# VGRIP-AFG-BLK
Compatible with most 1913 Picatinny-railed hand guards, the Magpul AFG
(Angled Fore-Grip) uses natural body mechanics to provide a comfortable, stable user
interface reducing fatigue and allowing precise weapon control. Positions shooter's hand
high on bore centerline to reduce recoil and facilitate faster, more accurate follow-up shots.
Harris #5 BiPod Adapter - $13.50
Part# BIPOD-ADAPT-HB5
Mounts the Harris Bipod
to standard AR15/M16 handguards through the hole in
handguard. Includes rectangular
interior plate, exterior washer, a
threaded QD stud and QD Sling Swivel.
Manganese phosphated steel - made in U.S.A.
Quick Detach
Sling Swivel - $8.00 - Part# SLINGSWIVEL-14
A quality Quick Detach Sling Swivel offering quick sling
removal for bench shooting or cleaning/maintenance. Machined
steel with spring loaded release screw, 1 1/4” wide sling loop,
designed to attach to our BiPod Stud or other similar studs.
BiPod Stud & Spacer Kit - $2.95 - Part# KIT-BIPODSTUD
Easily mount a BiPod or Quick Detach Sling Swivel to various
accessory handguards. Machined steel with Black Manganese
Phosphate finish. Stud is threaded 10/32.
Yankee Hill BiPod Adapter for AR15/M16 - $33.95 - Part# BIPOD-ADAPTER-YHM
Attaches to any Picatinny type rail to accept most bipods. Machined aluminum with 7/64ths Allen
Head Screws - black anodized finish hardcoated to Mil Spec - with steel bipod mounting stud.
Sights & Optics
See Barrel Parts - Page 21 - for
Standard A2 Front Sight Parts
EoTech EXPS2 Holographic Sight for AR15/M16 - $559.00 - Part# EOT-EXPS2-0
The EOTech EXPS2 Holographic Weapon Sight is their shortest model sight yet. Smaller and lighter
than other HWS sights, it runs on a single 123 battery to reduce sight length. The single battery
configuration requires only 2 3/4” rail space leaving more room for rear iron sights, magnifiers
or Night Vision. The Battery Cap with improved O-ring is tethered to the sight body to avoid
loss. Average battery life at brightness level 12 is roughly 600 hours. Made in the U.S.A.
Optics: Transmission holography - parallax free / Magnification: 1x / Eye Relief: Unlimited
/ Length/Width/Height: 3.5"x2.4"x2.8" (91.4x60.9x71mm) / Weight: 11.2 oz (317grams) /
Temperature: -40° to 150° F / Waterproof to 10 ft depth / Fogproof internal optics / Adjustment
(per click): 0.5 MOA (1/2" at 100 yds). See www.windhamweaponry.com for complete details
28
Sights & Optics
EoTech G33.STS 3X Magnifier for AR15/M16 - $589.00 - Part# EOT-3XMAGNIFIER
Shorter and lighter than previous models, the EoTech G33 Magnifier offers a new and
improved mount for faster transitioning from 3x to 1x, tool free azimuth adjustment, larger field
of view and an adjustable diopter for improved, more precise focusing. It offers split-second
transitioning from CQB to medium range targeting with superior light transmission, large field of
view, and more eye relief with windage and elevation adjustments that can be manipulated by
hand without any tools. The new slap to side mount is incredibly durable and operates with the slap of your
hand, knocking the mount to the side. The G33 also offers a locking, quick detach lever for easy attachment
and removal of both the optic and the mount. This magnifier aligns perfectly with standard height sights
and comes with a 7mm riser to accommodate the 7mm raised sights. Made by EoTech in the U.S.A.
EoTech Model 517 Holographic Sight - $509.00 - Part# EOT-517-A65
The EOTech 517 A65 includes buttons that allow easy brightness adjustments on the left side for instant
access, allowing a magnifier or a back up iron sight to fit closely to the sight body when a magnifier is
mounted behind it. It uses standard AA 1.5v batteries (included) as a power source. In addition
it has a cantilevered base that allows one to mount a part of the Holographic Sight over
standard hand guards of an M4 Rifle or an AR15/M16 Rifle. Made in the U.S.A.
A.R.M.S.® #40L Front Flip Up Sight - $107.95 - Part# ARMS40L-FRONT
This is a low profile, rail mounted, fold down front sight that can be mounted to picatinny rail
type gas blocks when the rifle has a "same plane” sighting system. Its unique design
ensures constant in-battery action and repeat zero, and its low profile allows an
unobstructed sighting view when using optics. A spring loaded quick release lever prevents
the sight from being accidentally engaged, but is quick to release even with gloves/mittens.
Utilizes a standard M4 / AR-15 front sight post and accepts most aftermarket sight posts. A small
stainless steel security cable prevents loss of the rail locking screw. Made by A.R.M.S. in the USA.
A.R.M.S.® #40L Rear Flip Up Sight - $129.95 - Part# ARMS40L-REAR
A quality companion to the #40L Front Sight above offering lower profile (folded height
.610"), clearance for mounting optics, and "same plane” design. It has .75 MOA click point of
impact shift, a unique spring loaded design to ensure constant battery action and repeat zero. A
quick release lever prevents the sight from being accidentally engaged, but it can be deployed with gloves or mittens. When
released into battery, the 250-300 meter aperture is ready for immediate close combat use. The initial elevation zero utilizes
the standard M16/M4 front sight bead. For longer ranges the leaf sight aperture is rotated to access the 500-600 capability
with a built in horizon line to help lead distant targets. A stainless steel security cable prevents loss of the rail locking screw.
Diamondhead Front Flip Sight for AR15/M16 - $109.00 - Part# DH-FRONTFLIP
This sight’s unique diamond-shaped housing frames and centers the target - especially when
integrated with its companion Rear Sight (below). It flips up quickly for rapid deployment, and
folds down at the push of a button. This sight will stay up securely and remains zeroed in
combat situations, and its elevation adjustments are secure and accurate. Easily installed on
Picatinny Rail Gas Blocks. A standard A2 Front Sight post is included, and construction is Mil.
Spec. Stainless Steel and Type 111 black anodized 6061 T6 Aircraft Aluminum.
Diamondhead Rear Flip Sight for AR15/M16 - $129.00 - Part# RS-10001
A premium back up iron sight, the Diamondhead Rear’s detent button locks the sight in a
deployed position and folds down with the push of a button. Its unique diamond-shaped
aperture places the front post perfectly in the rear aperture’s center. Short and long range
apertures are on the same plane, and same height as factory A2 sights (note: if using this sight
with an A2 standard front sight base, an .040” taller sight post will be required). Windage adjustments are 0.5
MoA accurate, small or large aperture can be active in either deployed or stowed mode. Folded height is a compact 0.435”.
Construction is Mil. Spec. Stainless Steel and Type 111 black anodized 6061 T6 aircraft aluminum. Made in the U.S.A.
A.R.M.S.® #71 Front Flip Up Polymer Sight - $40.95 - Part# ARMS71-FRONT
This economical yet precision Polymer Flip Up Front Sight fits all AR15/M16s with a Picatinny Rail
Gas Block. Of durable, metal-reinforced polymer construction, it is adjustable for elevation with its
Steel Front Sight Post. Height is .600" from the top of the rail when folded down. A spring loaded
mechanism deploys the sight quickly when its forward locking latch is depressed.
A.R.M.S.® #71 Rear Flip Up Polymer Sight - $58.95 - Part# ARMS71-Rear
The ARMS #71 Flip Up Rear Sight fits all AR15/M16 rifles with a "flat-top” Picatinny Rail Upper
Receiver. Its durable, metal-reinforced polymer construction offers both economy and precision.
Height is .600" from the top of the rail when in folded position. A spring loaded mechanism deploys
the sight quickly when its forward locking latch is depressed, and the #71-Rear features the same
windage adjustable metal dual apertures utilized in the A.R.M.S. #40L sight above.
A.R.M.S. #71L Front & Rear Sight Combination - $96.95 - Part# ARMS71L F/R
A1/A2 Sight Adjustment Tool - $6.95 - Part# SIGHTTOOL-A1-A2
Essential in your AR15 range bag, it adjusts height of both "5 notch” A1 and "4 notch” A2
Front Sight Posts - even the flip-up sights with taller "ears” on either side of the sight post.
29
Gunsmithing / Accessories
CMMG .22 LR Conversion Kit for AR15/M16 Harris Adjustable BiPod
$219.95 - Part# KIT-22LR-CONV
$119.95 - Part# BIPOD-S-LM
This .22 LR
Conversion
System comes
completely assembled and ready to install in
any AR15/M16. No gunsmithing or rifle
alterations required - it uses your factory
upper receiver, barrel, fire control system,
buffer and spring. Just replace the bolt and
carrier with the CMMG conversion unit,
closing the receivers, and load up the included
magazine with high-velocity round-nose .22 LR ammo. Test
fired to ensure correct function, precision machined from
high-grade stainless steel and brass for proper fit in any mil.
spec. .223 / 5.56mm rifle or carbine. One gray polycarbonate
25 round magazine is included - features self-lubricating
anti-tilt follower and constant-force spring to help ensure
reliable feeding. Made by CMMG in the USA.
Due to state regulations this magazine cannot be shipped
to CA, District of Columbia, MD, MA, NJ, NY, Hawaii.
Extra CMMG .22 LR Conv. Kit Magazines
$19.95 - Part# 22LR-CONV-MAG
Black Web Sling - $4.95 - Part# 12624561
A quality sling - we include one with
every gun we sell. Heavy 1 1/4" width black
nylon webbing, two black phosphate
finished steel buckles - overall length 52".
Chamber Plug/Multi-Tool for AR15/M16
$7.50 - Part# CP-02 Bright yellow, high strength
composite plastic, this handy tool shows the rifle
is unloaded when inserted in the chamber, it can
be used as push pin tool for pivot and take down pins,
and it’s also a magazine unloading tool.
Tetra ValuPro Gun Cleaning Kit
$17.95 - Part# CLEANKIT-TETRA
This kit offers the highest quality and
versatility all in an attractive, compact plastic
case - everything the shooter needs to
maintain, clean and lubricate a firearm.
Includes Tetra Gun Grease (10g), 2 oz. Triple
Action (cleaner - lubricant - protectant), .223
cal. bronze bore brush, cotton patches, patch
holder, cleaning rod, and extension pieces.
Tetra Gun Cleaning Pack - $19.95
Part# GUNCLEANINGPACK
Tetra’s "4 in 1” Gun Cleaning Pack
cleans, lubricates and protects your
firearms with a complete chemical
cleaning set for the true firearm
enthusiast. Contains: 3.75 oz. Tetra
Spray Lubricant, 1 oz. Tetra Lubricant, 1
oz. Tetra Gun Grease, 4 oz. Copper
Solvent, and a Tetra "Gun Cleaning Made Easy" DVD.
WW Magnetic Gun Cleaning Mat - $23.95
Part# CLEANINGMAT Our gunsmith discovered this
great mat and has used one ever since. 54” x 16” Industrial
Grade PVC Membrane with two magnetic strips to hold
springs, detents and small parts in place while you work.
Withstand solvents and bore cleaners and will not absorb
chemicals. Custom screen printed with a gold Windham
30 Weaponry logo. From Armor Industrial Products - U.S.A.
Harris bipods quickly attach and
detach on a variety of rifles. They
mount to a quick detach sling swivel
stud (see Page 28) and offer adjustable
height legs. The legs extend by spring action,
height settings are adjustable from 9 to 13”
(adjustment height range is from resting
surface to center of bore), notches on the
legs help with leveling. Legs fold out of the way
when not in use. Constructed of aluminum and high
carbon steel, anodized black finish. Made in USA.
Blackhawk 1 Point Storm Sling
$32.95 - Part# SLING-BH1PT-BK
The rugged Blackhawk 1 Point
Storm Sling is made from
high-quality 1.25” nylon webbing,
adjusts 46” to 64” (diam.) with a
tri-glide buckle to fit all body sizes
or over bulky tactical gear.
Single-point attachment design
makes it ambidextrously functional
and user friendly. An elliptical bungee
segment provides comfort and support,
and offers 4” of flex for weapon agility and
CQB tactics. The bungee section is encased in compressed
tubular nylon sheathing to limit bounce and enhance
retention, and the elastic-encased mash clip provides quiet
single-point weapon attachment. Made in the USA.
Handguard Removal Tool for AR15/M16
$15.95 - Part# HGD-TOOL A necessity for any AR
style rifle shooter or agency armorer, this tool eases removal
of standard handguards on M4 carbines, mid length and rifle
length AR15 rifles by applying even pressure on the delta
ring. One piece construction, the tool is covered with
protective plastic to prevent damage to the finish of your
rifle. The hooked end locks into the magazine well, and as you
squeeze the two lever handles, even downward pressure
compresses the delta
ring to allow the
handguard halves to
pop off. Made in U.S.A.
Wipe-Out Patch-Out Brushless Bore Cleaner
$13.95 - Part# CLEANER-PATCH-OUT
This effective product has impressed us. Heavily
fouled barrels come clean in a very short time with no destructive brushing and no pitting. It will
dissolve brass, bronze, and copper, and will degrade
lead so it can be pushed out with a patch. It cannot
cause rust, will not gum or form solids, and is safe
for all barrel steels - carbon and stainless. 8 Fluid
ounces - made in the U.S.A.
Wipe-Out Tactical Advantage Bore Cleaner
$15.95 - Part# CLEANER-TACADV
Designed for the tactical shooter, this very
"carbon aggressive” bore cleaner removes copper
and powder fouling with a minimum of effort. It
dissolves carbon on contact, is easy to use, less
messy, and odorless. It protects all metal parts
against corrosion and rust and is safe for all steels
and all metal plating (including chrome lined
barrels). 8 fluid ounces - made in the U.S.A.
Gunsmithing / Accessories / Apparel
Dewey 30” Barrel Cleaning Rod
$28.95 - Part# CLEANINGROD-30
Dewey Chamber Cleaning Rod with Brush Dewey Rods are famous throughout the shooting world for their
$15.95 - Part# CLEANINGROD-CHAMBER quality and durability. For all .22 / .223 / 5.56mm barrels, the 30”
rod is nylon coated to protect rifling and has a heavy plastic handle with internal ball bearings to allow the rod to track the
rifling in the bore as you clean. Included with the 30“ rod is an 8/32 male to female thread adapter and a jag.
The Dewey Chamber Cleaning Rod is specifically for the AR15/M16 platform rifle and includes a .223 / 5.56mm chamber
brush. The 16” heavy brass rod and handle are long enough to easily reach the chamber through the rear of the receiver.
Dewey Military Thread Adapter - $3.95
Part# CLEANINGROD-ADAPT
This little brass piece from Dewey is the necessary link to
connect 8/32 thread .22 Cal. Rods to 8/36 thread military style
brushes. Machined from solid brass, and made in the USA.
W-W .223/5.56mm Bore Brush - $1.95
Part# BRUSH-BORE-223
A top quality Bore Brush for .223/5.56mm caliber barrels.
Finest phosphor bronze bristles, threaded 8/32 to fit most
commercial .22 cal. cleaning rods.
W-W "Visual Guide” Countermat - $9.95
Part# ACC-COUNTERMAT
An indispensable visual
guide to our WW-15 Rifle,
every part of the rifle is
printed in full color on heavy
stock, laminated for counter
top protection, with a
non-skid foam backing. 18” x 12” size - makes a great gift.
W-W Logo Sticker
$1.95 - Part# ACC-DECAL
Display your brand loyalty for
the finest AR15 type rifle made
with this Windham Weaponry adhesive logo sticker. Apply it to
car/truck bumpers, tool boxes or any smooth surface. Printed
in bright blue & gold on white adhesive vinyl, it measures - 6”
x 2.5” in size. Show your Windham Weaponry allegiance.
W-W .223 / 5.56mm Chamber Brush - $4.50
Part# BRUSH-CHAMBER-223 A Mil. Spec quality
Chamber Brush - threaded 8-32 to fit standard rods. Bronze
bristles scrub out the chamber while the longer, stainless
steel tufts clean the locking lug recesses - all
necessary to help preserve
the accuracy of your AR rifle.
Telestock
Wrench for
AR15/M16 - $8.95
Part# WRENCH-TELE
An essential tool for the
armorer or AR Carbine owner,
this dual function steel Telestock Wrench fits the castellated
nut that locks the Telestock to the Receiver. It includes a
cutout that fits the end of the receiver extension tube. The
handle is plastic dip coated for comfort. Machined from black
manganese phosphate coated steel - made in the U.S.A.
Windham Weaponry 25 Meter
Zeroing-In Targets - 10 Pack
$3.95 - Part# KIT-TARGET
As an aid to achieving all the accuracy
built in to your rifle, these well designed
Zeroing-In Targets have a center mass
target as well as 4 individual zeroing
targets with instructions for front &
rear sight adjustment. Ten 14” x 20”
targets printed black on non-glare
tan stock in a waterproof poly bag.
W-W “Static-Cling” Logo Sticker - $1.95
Part# ACC-WINDOWDECAL Same logo image as above
The Windham Weaponry Blue Polo Shirt
Men’s & Women's Sizes - $28.95
reverse printed on clear static-cling vinyl for use on windows.
This high quality blue
Windham Weaponry Polo
Shirt is at home on the
range or anywhere you roll.
The Windham Weaponry
script logo is embroidered
in gold on comfortable "silk
touch” royal blue knit fabric
- a 5 oz., 65/35 poly/cotton
pique - very lightweight and
silky soft with minimal
shrinkage. They feature flat
knit collar and cuffs; metal
buttons with dyed-to-match plastic rims; double-needle
armhole seams and hem. Adult Sizes: S through XXXXL.
Women’s sizes are tailored appropriately.
MEN’S PART NUMBERS:
WOMEN’S PART NUMBERS:
Small: ACC-POLO-M-S
Small: ACC-POLO-W-S
Medium: ACC-POLO-M-M
Medium: ACC-POLO-W-M
Large: ACC-POLO-M-L
Large: ACC-POLO-W-L
XLg.: ACC-POLO-M-XL
XLg.: ACC-POLO-W-XL
XXLg.: ACC-POLO-M-XXL
XXLg.: ACC-POLO-W-XXL
XXXLg.: ACC-POLO-M-XXXL
XXXLg.: ACC-POLO-W-XXXL
For XXXL sizes, add $2.00
XXXXLg.: ACC-POLO-M-XXXXL
XXXXLg.: ACC-POLO-W-XXXXL
For XXXXL sizes, add $4.00
For XXXXL sizes, add $4.00 31
Windham Weaponry Royal Blue Hat - $14.95
Part# ACC-BCAP-ROYBL A lighter weight material
cap for warm weather use, Windham
Weaponry's Royal Blue Hat keeps
you cool and looks sharp with
its gold embroidered Windham
Weaponry logo. 100% Cotton
construction with an
adjustable Velcro back-strap
(one size fits all).
Windham Weaponry
Duck Brown Hat
Hat - $19.95
Part# ACC-BCAP-BRWN
The Windham Weaponry
Duck Brown Hat is for active
outdoor people. It’s sewn in a low profile design from
lightweight cotton fabric to keep you cool and comfortable.
One size fits all with an adjustable Velcro back-strap.
Windham Weaponry logo is embroidered in gold on the front.
Apparel
Windham Weaponry “Camo” Hat
$19.95 - Part# ACC-BCAP-CAMO
In the Advantage Timber camo
pattern, this comfortable, low
profile hat features a gold
embroidered Windham
Weaponry logo. Made in U.S.A.
Keeping warm at the range or the game with this
high quality Windham Weaponry Blue & Gold
"Hoodie” Sweat Shirt. The W-W classic script logo is
embroidered in gold on the left breast of this royal blue
sweatshirt. Nine oz. 60/40 ring spun, combed cotton/poly
soft fleece is sewn in a full athletic cut for easy movement.
It features gold accents on the shoulders, on the half rib knit
/ half fabric cuffs and on the rib knit waistband. The neck is
twill taped, and the sleeves are raglan cut. A front pouch
pocket offers convenient storage and handwarming.
Windham Weaponry Blue
& Gold "Hoodie” Sweat
Shirt for Men & Women
$44.95
“UNISEX” SIZES S-4XL
PART NUMBERS:
Small: ACC-HOODIE-S
Med.: ACC-HOODIE-M
Large: ACC-HOODIE-L
XLg.: ACC-HOODIE-XL
XXLg.: ACC-HOODIE-XXL
For XXL sizes, add $2.00
XXXLg.: ACC-HOODIE-XXXL
XXXXLg.: ACC-HOODIE-XXXXL
For XXXXL sizes, add $8.00
Ordering Instructions / Returns / Shipping
Payment: Windham Weaponry accepts Visa, Master Card and Discover. However, we regret that we are unable to
accept international credit cards. The billing address you provide must be the cardholder's address. That is the address the bank
has on record. It is also the address where your credit card billing statements are sent. If you do not accurately provide this
information, your order could be delayed in processing. We will not process your credit card until your order is shipped.
We also accept US Postal money orders, Bank money orders, and personal checks. These orders will be held for 10 days to
give time for the payment to clear.
Returns & Repairs: Windham Weaponry offers a 30-day money back guarantee on all parts and accessories. If
you need to return a product, please be advised of the following policies.
• All items being returned for repair/upgrade/warranty work require a Return Merchandise Authorization number (RMA)
which is provided by our Customer Service team toll free at 855‐808‐1888. Returns must be in new condition and within 30
days from original purchase date.
• After you receive your RMA, please fill out an RMA information form, and include it with your shipment. You can download
this form at: http://www.windhamweaponry.com/rma.pdf
• A restocking fee of 15% will be charged for returns over 30 days. No restocking fee will be charged if the return is the result
of a WW error.
• Please include in the package, a copy of the original invoice and the RMA number.
• All damage claims due to shipping must be made directly to the carrier as soon as you receive your shipment.
• All repairs must be sent shipping prepaid as COD's will not be accepted. Windham Weaponry strongly suggests that you
insure your return as most carriers will only cover up to $100 if no additional insurance is purchased. Please remove all
accessories not required for repairing the item such as optics, lasers, flashlights, bipods, etc. If you are having an item installed
that you purchased from Windham Weaponry, then the installation is free of charge.
Ship All Returns To:
Windham Weaponry, Inc.
999 Roosevelt Trail
Windham, ME 04062
Sales Phone Number (Toll Free): 855-808-1888
Phone Number: 207-893-2223
Sales Fax Number: 207-893-1623
E-mails to: [email protected]
• If the repair is not covered by Warranty, then you will be called with an estimate of the gunsmithing charges plus return
shipping for your approval prior to any work being done. Gunsmithing charges are $65.00/hour (min. 1 hour, and billed in 1/4
hour increments)
• We do not accept Class III returns or repair without prior notification and appropriate BATFE transfer paperwork.
Shipping: FedEx is our preferred shipper. Some small packages may be shipped through FedEx's SmartPost program,
where FedEx delivers the package to your local Post Office and USPS will then deliver it to your PO Box or to your door. Shipping
rates vary by State and dollar amount. See all Rate Charts at: www.windhamweaponry.com/shipping.asp
• If an order is partially shipped, then the balance of the order will be shipped with free shipping.
• Orders will not be shipped COD.
• Sales Tax will apply to all Maine Shipments unless we have a Tax Exempt Certificate on file.
• We offer Free Shipping to all Maine addresses.
• Certain items, such as lower receivers, lower assemblies and rifles will be shipped "Adult Signature Required".
• In stock orders requesting expedited Next Day, Two Day Std, or Three Day Express Saver must be received no later than 2pm
Eastern Time or they will ship the next business day.
• All Non Warranty RMA shipments will be charged $19.50 for return ground shipping which includes Adult Signature
Required. For Saturday Deliveries, please call Customer Service.
32
Gunsmithing / Gift Certificates
Some parts and accessories should be installed by a qualified gunsmith. If you are purchasing these parts from us you should
send the rifle (or upper or lower as necessary) for installation. We do not charge gunsmithing fees for installation of parts
purchased from Windham Weaponry - and you can be assured the installation will be done correctly and safely.
Any rifle being returned for warranty repair work - once the weapon has been evaluated and approved for warranty repair
- will be repaired free of charge. If the repair is not covered under warranty, you will be called with an estimate of the
gunsmithing charges plus return shipping for your approval prior to any work being done. Gunsmithing charges are
$65.00/hour (minimum one hour) and billed in 1/4 hour increments.
Please remove any optics or accessories not required in the repair to avoid damage in shipping before sending us any rifle.
We will make repairs on AR15s of other manufacturers provided those firearms use mil spec parts that are interchangeable
with those used by Windham Weaponry. If the repair is for a functionality problem, the caliber must be .223/5.56mm NATO.
Gift Certificates:
Windham Weaponry now offers Gift Certificates in the amount of your choice. Order on-line or by calling 1-855-808-1888.
You can redeem them by mailing it in with an order, or by giving us the Gift Certificate Number on-line. Gift Certificates can
not be used for complete rifle purchase (or part of a rifle purchase), as FFL regulations apply.
Order Form
You can order on-line at: www.windhamweaponry.com
or Telephone Orders are Toll Free at: 1-855-808-1888
NAME: ____________________________________________________________________
ADDRESS: _________________________________________________________________
CITY: _____________________________________________________________________
STATE: ________________________________________________ ZIP: ________________
TEL. #: ____________________________________________________________________________
PAYMENT: ❍ MASTERCARD ❍ VISA ❍ DISCOVER ❍ CHECK OR MONEY ORDER
CREDIT CARD ACCOUNT #: ____________________________ EXPIRATION DATE: __________
SIGNATURE: ________________________________________________________________
PART #
DESCRIPTION
Basic Fed-Ex Shipping Rates. Priority/Overnight Services available at extra
cost. Call 1-855-808-1888 or see www.windhamweaponry.com
$0.00 - $19.99
$20.00 - $49.99
$50.00 - $99.99
$100.00 - $249.99
$250.00 - $499.99
$500.00 and above
$ 6.50
$ 9.00
$12.00
$14.50
$18.00
$21.00
QUANTITY PRICE
AMOUNT
SUBTOTAL
Maine Residents Add 5% Sales Tax
Shipping, Handling & Insurance
TOTAL AMOUNT
WINDHAM WEAPONRY, INC. • 999 Roosevelt Trail • P.O. Box 1900 • Windham, Maine 04062 U.S.A

law enforcement models

Transcription

Similar documents

if you`re not first you`re last!

Directions to Windham High School

Jeff K.`s `M1917 Enfield`

Jeff K.`s `Remington 700 Target Rifle`

Equipment Catalogue.

steyr aug a1 / a2 - Steyr Mannlicher

Bruce Potts is surprised as he tests the SMK XS19

IO INC June 2016 News Press Release.indd

Assault Rifle Cases ARC - Elite Survival Systems