Hand Protection

Transcription

Hand Protection

Hand Protection
Hand Protection & General Glove Information
Applicable OSHA Regulation
OSHA 29 CFR 1910.138
a) General Requirements. Employers shall
select and require employees to use appropriate hand protection when employees’ hands are exposed to hazards such
as those from:
Skin absorption of harmful substances;
•
•
•
•
•
•
Severe cuts or lacerations;
Severe abrasions
Punctures;
Chemical burns;
Thermal burns; and
Harmful temperature extremes
b) Selection. Employers shall base selec-
tion of the appropriate hand protection on
an evaluation of the performance characteristics of the hand protection relative to:
• The task(s) to be performed;
• Conditions present; and
• The hazards and potential hazards
identified
There are a variety of factors that influence proper glove selection. Follow
this general guideline to assist in the
process.
1) Analyze and evaluate the conditions
to which you will subject the glove and
thoroughly analyze any chemicals handled
2) Determine the types of physical contact, such as:
•
•
•
•
harp objects,
brasion,
Temperature, and
Contact duration
3) Choose the glove with the highest
rating for chemical and physical conditions.
4) Determine application needs and
glove requirements:
• Breakthrough Detection Time–BDT:
The time it takes for a chemical to
pass through the glove material
measured in minutes.
• Dexterity: Select unsupported
(unlined) gloves for extra dexterity
and sense of touch. If cut, snag,
puncture, or abrasion-resistance
is important, match the application’s critical factors to the glove’s
physical characteristics — whether
supported or unsupported.
• Grip: Select a grip pattern that
provides grip needed for the job.
Common patterns are diamond,
embossed, pebble, patterned,
dipped, or smooth.
• Length: Choose glove length by
the depth to which the arm will be
immersed or exposed to chemical
splash.
• Size: Correct size will ensure optimum wear comfort, dexterity, and
employee satisfaction.
5) Glove colors could be a factor in work
areas or identifying product exposure.
Types of Leather
COWHIDE
Cowhide is comfortable, durable and
abrasion resistant. It is the most commonly used leather in the glove market.
Cow leather gloves are typically chrome
tanned to promote longevity.
tance. The high lanolin content makes it
one of the softest leathers available.
DEERSKIN
Deerskin is a soft, supple and luxurious
hide. It offers excellent dexterity, durability, comfort and high tensile strength.
PIGSKIN
Pigskin offers the greatest breathability
due to large pores in the hide. Pigskin is
ideal for wet applications given its tendency to remain soft after exposure to
moisture.
GRAIN LEATHER VS. SPLIT LEATHER
Grain leather is the smooth, attractive
exterior side of the animal hide. Grain
leather is comfortable, durable and offers better dexterity and sense of touch.
GOATSKIN
Goatskin is preferred where tactile sensitivity is required. Goat provides excellent tensile strength and abrasion resis-
Split leather is the internal portion of
the animal hide. The rougher texture of
split leather makes it easy to differentiate from grain leather. Split is the most
popular hide used in manufacturing
leather palm gloves. It offers abrasion
resistance for more heavy duty applications.
Grain
Mailing Address: P.O. Box 1025 • Deer Park, TX 77536
Split
105
Information Hand Protection
Glove Selection
Types of Thumbs
Cuff Materials
RUBBERIZED
KEYSTONE THUMB
Cuff Styles
KNIT WRIST
Hand Protection Information
Keystone thumbs offer the highest
range of motion and are the most comfortable. This style offers a wide range
of applications and is the most ergonomically correct work glove.
Rubberized cuffs are made from two fabric
layers with a rubber material laminated in
between them. This cuff provides moderate
impact abrasion resistance.
Promotes warmth, fit and
helps prevent common particles from entering the glove.
WING THUMB
LEATHER CUFFS
Leather cuffs are primarily constructed
from split leather. These cuffs are launderable, durable and built for longer wear.
2-1/2” in length, this is the
most common cuff style
available. Safety cuffs help
protect the wrist area and
slide on and off easily.
DUCK CUFFS
GAUNTLET CUFF
Wing thumbs are designed for open
handed work [pushing, pulling, lifting,
etc.] The seams are not exposed to
wear when the palm is open, thus extending the life of the work glove.
STRAIGHT THUMB
Straight thumbs are designed for close
fisted work [shoveling, prying, sweeping, etc.] When the fist is closed, the
seams are out of the wear area.
KEYSTONE
STRAIGHT
WING
SAFETY CUFF
Duck cuffs are made primarily for laundering purposes. The material is made from a
single layer of heavy cotton.
4” in length, the gauntlet
cuff provides better forearm
protection.
STARCHED CUFFS
BAND TOP
Starched cuffs are made from two layers
of fabric laminated and starched together.
These cuffs provide mild impact and abrasion protection.
The band top slides easily on
and off the hand. It provides
comfort and moderate wrist
protection.
DENIM CUFFS
SLIP-ON
Denim cuffs are made from a single-ply
denim fabric. These cuffs are typically used
in economical products.
Easy to slide on and off
the hand. It provides no
substantial wrist protection.
Leather Palm Features
1) Leather Fingertips
2) Full Leather Forefinger
3) Welted Seams
4) Wing Thumb
5) Continuous Pull
6) Safety Cuff
7) Shirred Elastic Back
8) Knuckle Strap
Cut & Sewn vs. Dipped
Cut & Sewn gloves are made from a
fabric sheet of material which is cut and
then sewn into a finished product. Cut
and Sewn gloves can be made into a
Clute Cut or Gunn Pattern from leather,
jersey, canvas or terrycloth. As illustrated here, they can also be manufactured
from synthetic materials such as nitrile
or vinyl that have been laminated or impregnated into sheets of fabric.
Dipped gloves are manufactured from
dipping a formed mold covered with a
prefabricated knit, cotton canvas, string
knit, etc. shell into a predetermined
polymer such as Nitrile, PVC, Latex,
Neoprene and/or Polyurethane.
106
CLUTE CUT
(Example)
GUNN CUT
(Example)
CUT & SEWN
DIPPED
Web: www.gosafe.com • Phone: (800)330-9240 • Fax: (281)476-5394
SINGLE DIPPED OR DOUBLE
DIPPED
Double dipped PVC gloves provide better abrasion and chemical resistance
while single dipped products offer an
economical alternative.
SMOOTH & TEXTURED FINISHES
Smooth
No additional gripping capabilities, but
economical.
Cut Protection and Cut Resistance
Cut protection is the combination of
influences that tend to prevent a worker from being cut. Material properties
such as cut resistance tear strength, and
abrasion resistance as well as properties
such as grip and dexterity are all important aspects of cut protection. However,
cut protection also includes other factors
not related to protective apparel such as
machine guarding, workplace set-up,
working conditions and worker training.
Cut resistance, defined as the ability of
Rough
a material to resist damage when chalBetter gripping capabilities than smoothlenged with a moving sharp edged ob-remains economical in price.
ject, is only one component of cut protection. Because cut resistance can be
Sandpaper Finish
Enhances gripping capabilities com- measured using standard testing equipment, it’s often used when comparing
pared to rough finish.
the safety of various products.
Etched Finish
This texture is associated with our pre- Lacerations are the #1 Safety Issue in
mium PVC line and offers enhanced Most Plants and Construction Sites. The
most common causes of Hand Injury are:
gripping capabilities.
• No hand protection being worn at
time of injury
Jersey vs. Interlock
• Poor compliance to PPE programs
• Lack of proper cut protection in
• PPE program
U.S. Bureau of Labor statistics estimates annual expenses of $382,000,000
result from hand injury in the construction industry alone.
Factors to Determine “Right” Cut Resistant Glove:
• Risk of a cut
• Potential severity
• Grip issues
• Abrasion
• Puncture
• Ergonomics
Technologies Affecting Cut Resistance:
• High Performance Fibers (Kevlar,
• Dyneema, Spectra-HP-PE,
• Intcept, Dual TEC)
• Coatings-Resistance & Protection
• Combinations of Fibers
• (Steel-Polyester-Nylon)
Cut Protection and Cut Resistance
Jersey
Napped jersey lining enhances comfort EN APPROVED METHOD:
varies. The maximum weight is meaand sweat absorption
The blade moves and the weight is sured. Approved test procedure/machine
constant. The number of cycles is mea- approved by the ASTM committee to
Interlock
sured. In the European market gloves are test cut resistance uses a load-versusLightweight liner that provides a “cool” evaluated according to method EN 388, distance evaluation to determine the cutwear. Less comfortable than the jersey the mandatory performance standard for through point of a material.
lining, but more economical.
all gloves as standardized and regulated
by CEN (Committee for European Nor- Testing Process:
A cutting blade (surgical-grade razor)
malization). Using the Couptest apparatus, a circular cutting blade of specified with a specified load (weight) is moved
Cut Protection Resources
sharpness under constant weight load across a material.
www.ansi.org - ANSI
rotates back and forth over a rectangular
American National Standards Institute
The distance at which the blade traveled
test specimen for a series of five cut failures. A standard calibration reference from the original contact point to the cutwww.astm.org - ASTM
material is cut in like fashion before and through point is measured for several
American Society for Testing &
after each cut of the test specimen itself. loads (weights in grams).
Materials
These reference values are added to the
After several tests, a load-versus-distest specimen value and divided by the
www.safetyequipment.org - ISEA
average reference value, resulting in a tance curve is plotted and used to deInternational Safety Equipment Ass.
cut index. Results are classified by CEN termine the load (weight) required to cut
through the material at 25MM (reference
into six performance levels.
load).
ASTM APPROVED METHOD:
The distance is fixed (2”) and the weight
107
PVC Dipped Gloves
Chemical Resistance Guide
Introduction to the 8th Edition
When reviewing the following recommendations, remember that tests are conducted under
laboratory conditions, and that actual workplace
conditions usually dictate a combination of performance capabilities. A product’s resistance to
cuts, punctures, and abrasion must also be taken
into account as a critical usage factor. A glove
with excellent permeation resistance may not be
adequate if it tears or punctures easily. Always
factor in the physical performance requirements
of the job or application when selecting a chemical resistant glove.
Ansell’s ASTM standard permeation and degradation tests are presented on the following pages
as an aid in determining the general suitability of
various products for use with specific chemicals.
Because the conditions of ultimate use are beyond
our control, and because we cannot run permeation tests in all possible work environments and
across all combinations of chemicals and solutions, these recommendations are advisory only.
THE SUITABILITY OF THE PRODUCT FOR A SPECIFIC JOB MUST BE DETERMINED BY TESTING
BY THE PURCHASER.
Definition of Key Terms
Permeation is a process by which a chemical
can pass through a protective film without going
through pinholes, pores, or other visible openings.
Individual molecules of the chemical enter the
film, and “squirm” through by passing between
the molecules of the glove compound or film. In
many cases the permeated material may appear
unchanged to the human eye.
Chemical permeation can be described in
simple terms by comparing it to what happens to
the air in a balloon after several hours. Although
there are no holes or defects, and the balloon is
tightly sealed, the air gradually passes through
(permeates) its walls and escapes. This simple
example uses gas permeation, but the principle is
the same with liquids or chemicals.
Permeation data are presented in two values:
Breakthrough Time and Rate. Breakthrough times
(min.) are the times observed from the start of
the test to first detection of the chemical on the
other side of the sample (for test methodology,
see page 97). These times represent how long a
glove can be expected to provide effective permeation resistance when totally immersed in the test
chemical.
Permeation rates are the highest flow rates
recorded for the permeating chemicals through
the glove samples during a six-hour or eight-hour
test. These qualitative ratings are comparisons of
permeation rates to each other.
Degradation is a reduction in one or more
physical properties of a glove material due to
contact with a chemical. Certain glove materials
may become hard, stiff, or brittle, or they may
grow softer, weaker, and swell to several times
their original size. If a chemical has a significant
impact on the physical properties of a glove material, its permeation resistance is quickly impaired.
For this reason, glove/chemical combinations
rated “Poor” are usually not tested for permeation
resistance, and combinations rated “Not Recommended” are never tested for permeation resistance. Please note, however, that permeation and
degradation do not always correlate.
The overall Degradation Rating for each chemical is explained in “How To Read The Charts.”
How to Read the Charts
Three categories of data are represented for each Ansell product and corresponding chemical:
1) overall degradation resistance rating; 2) permeation breakthrough time, and 3) permeation rate.
Standards for Color-Coding
A glove-chemical combination receives GREEN
if either set of the following conditions is met:
The Degradation Rating is Excellent or Good
The Permeation Breakthrough Time is 30 minutes or greater
The Permeation Rate is Excellent, Very Good, or Good
OR
The Permeation Rating is not specified
The Permeation Breakthrough Time is 240 minutes or greater
The Degradation Rating is Excellent, or Good
A glove-chemical combination receives RED
if either set of the following conditions is met:
The Degradation Rating is Poor or Not Recommended
OR‘
The Degradation Rating is Degrades with Delamination (DD)
The Permeation Breakthrough Time is less than 20 minutes
All other glove-chemical combinations receive
YELLOW . In other words, any glove chemical
combination not meeting either set of conditions required for Green, and not having a
Red degradation rating of either Poor or Not Recommended, receives a
YELLOW rating.
Why is a product with a shorter breakthrough time
sometimes given a better rating than one with a longer breakthrough time?
One glove has a breakthrough time of just 4 minutes.
It is rated “very good,” while another with a breakthrough time of 30 minutes is rated only “fair.” Why?
The reason is simple: in some cases the rate is more
significant than the time. Imagine connecting two hoses of the same length but different diameters to a faucet using a “Y” connector. When you turn on the water,
what happens? Water goes through the smaller hose
first because there is less space inside that needs to
be filled. But when the water finally gets through the
108
larger hose it really gushes out. In only a few minutes,
the larger hose will discharge much more water than
the smaller one, even though the smaller one started
first. The situation is similar with gloves. A combination of a short breakthrough time and a low permeation rate may expose a glove wearer to less chemical
than a combination of a longer breakthrough time and
a much higher breakthrough rate, if the glove is worn
long enough.
Key to Permeation Breakthrough
>Greater than (time) <Less than (time)
Key to Degradation Ratings
E– Excellent; fluid has very
little degrading effect.
G– Good; fluid has minor
degrading effect.
F– Fair; fluid has moderate
degrading effect.
P– Poor; fluid has pronounced
degrading effect.
DD–Degrades the outer layer
and delaminates it.
NR– Not Recommended; fluid
has severe degrading effect.
DD is a new degradation rating that applies to Viton/butyl gloves versus certain
chemicals. It means “Degrades and Delaminates”. If a chemical causes severe
swelling of Viton but has little effect on
butyl, the adhesion between these two
rubber layers can be overcome under
the relatively severe continuous liquid
contact that is part of an ASTM or CEN
standard permeation test. The end result
of this stress is Viton “blisters” or even
complete layer separation. The damage
is likely to be permanent.
In cases such as these the butyl layer
is providing most of the protection. But if
the end use involves only the possibility
of splash or intermittent contact so that
the Viton layer never absorbs enough
chemical to swell and delaminate, Viton
/ butyl gloves might still be the best
choice. The ultimate decision on when to
use plain butyl and when to use Viton/
butyl will depend on the overall chemical
mix in your facility and on the degree of
exposure to each.
Specific Gloves Used for Testing
Laminated LCPTM Film
Nitrile
Neoprene Unsupported
Polyvinyl Alcohol Supported
Polyvinyl Chloride Supported
Natural Rubber Latex
Neoprene/Latex Blend
Butyl Unsupported
Viton/Butyl Unsupported
Degradation and Permeation
Barrier® 2-100 (2.5 mil/0.06 mm)
Sol-Vex® 37-165 (22 mil/0.56 mm)
29-865 (18 mil/0.46 mm)
PVATM
Snorkel®
Canners 343 (20 mil/0.51 mm)
Chemi-Pro® 224 (27 mil/0.68 mm)
ChemTek® 38-320 (20 mil/0.51 mm)
ChemTek® 38-612 (12 mil/0.30 mm)
109
110
Permeation Testing
Ansell conducts permeation testing
in accordance with ASTM Method F 739
standards. A specimen is cut from the
glove and clamped into a test cell as a
barrier membrane (see illustration). The
“exterior” side of the specimen is exposed to a hazardous chemical. At timed
intervals, the unexposed Methodology
“interior” side of the test cell is checked
for the presence of the permeated chemical and the extent to which it may have
permeated the glove material.
This standard allows a variety of
options in analytical technique and collection media. At Ansell, dry nitrogen
is the most common medium and gas
chromatography with FID detection is the
most common analytical technique. Our
Research Department also uses liquids
such as distilled water and hexane as
collecting media, and techniques such
as conductivity, colorimetry, and liquid
chromatography for analysis of the collecting liquid. 8th Edition Form No. CRGGC. 9/08 ©2008 Ansell Healthcare. All
Rights Reserved.
30 minutes. The percentage of change
in size is determined, and the patches
are then dried to calculate the percentage of weight change. Observed physical
changes are also reported. Ratings are
based on the combined data.
Degradation Testing
Patches of the test material are cut
from the product. These patches are
weighed and measured, and then completely immersed in the test chemical for
111
Methodology
Cut Resistance Guide
Terms and Definitions
ANSI/ISEA 105 - American National Standard for Hand Protection: Voluntary US standard for gloves.
ASTM F1790 - Test method specified under ANSI/ISEA 105 to measure cut resistance.
CPPT - Cut Protection Performance Test: Test machinery used to perform ASTM F1790. A test sample is cut by a straight edge
blade, under load, that moves along a straight path. The sample is cut five times each at three different loads and the data is
used to determine the required load to cut through the sample at a reference distance of 20 mm. (0.8 inches). This is referred
to as the Rating Force or Cutting Force. The higher the Rating Force, the more cut resistant the material. Cut resistance is
measured in grams and converted to levels.
Hand Protection Cut Resistant
CE - Committee de European
EN 388 - Set of CE Test Standards for Mechanical Hazards: Abrasion Resistance, Blade Cut Resistance, Tear Resistance and
Puncture Resistance.
Couptest Tester - Machinery used to determine cut resistance under CE/EN 388. A circular blade, under a fixed load, moves
back and forth across the sample until cut-through is achieved. A cotton canvas fabric is used as the reference material. The
reference material and test sample are cut alternatively until at least five results are obtained. The cut resistance is a ration
of the number of cycles needed to cut through the test sample vs. the reference material. This is referred to as the cut index.
The higher the cut index, the more cut resistant the material. The cut index is converted to levels.
Cordova Glove Cut Resistance Information Tables
Glove SKU #
Description
ASTM F1790 (CPPT)
CE/EN 388
Page #
MSG3757
Monarch™ Split Leather Palm
Cut Level 4
Cut Level 5
118
MSG3750
Monarch™ White Polyurethane Palm Coating
Cut Level 3
Cut Level 5
118
MSG3752
Monarch™ Black Polyurethane Palm Coating
Cut Level 3
Cut Level 5
118
MSG3755
Monarch™ Black HCT-Nitrile Coating
Cut Level 3
Cut Level 5
118
MSG3758
Monarch™ Black Crinkle Latex Coating
Cut Level 3
Cut Level 5
118
MSG3070
100% Kevlar® String Knit Gloves
Cut Level 3
N/A
117
MSG3075
100% Kevlar® PVC Dotted String Knit Gloves
Cut Level 3
N/A
117
MSG3050
Kevlar® Gloves with Latex Palms
Cut Level 3
Cut Level 4
112
MSG3060
Kevlar®/Cotton String Knit Gloves
Cut Level 2
N/A
117
MSG3065
Kevlar®/Cotton PVC Dotted String Knit Gloves
Cut Level 2
N/A
117
MSG3760
Premium Dyneema® Cut Resistant Gloves
Cut Level 2
Cut Level 3
121
MSG3055
Kevlar® Gloves with Nitrile Palms
Cut Level 2
Cut Level 2
112
MSG3710
White Dyneema® Shell/Polyurethane Standard
Cut Level 1
Cut Level 3
121
MSG3710G
Gray Dyneema® Shell/Polyurethane Standard
Cut Level 1
Cut Level 3
121
MSG3700
White Dyneema® Shell/Polyurethane Premium
Cut Level 1
Cut Level 3
121
MSG3700G
Gray Dyneema® Shell/Polyurethane Premium
Cut Level 1
Cut Level 4
121
ANSI
EN 388
Page #
WCHE701CRN Zone Defense™ 701CRNF Nitrile Palm
Cut Level 1
3132
119
WCHE701CRL Zone Defense™ 701CRLB Crinkle Latex Palm
Cut Level 1
3142
119
WCHE701CRP Zone Defense™ 701CRPB Polyurethane Palm
Cut Level 1
3132
119
WCHE703CON Zone Defense™ 703CONF Nitrile Palm
Cut Level 2
4343
120
WCHE703COP Zone Defense™ 703COPB Polyurethane Palm
Cut Level 2
4343
120
WCHE705CGL Zone Defense™ 705CGLB Latex Palm
Cut Level 5
4543
120
WCHE705CGN Zone Defense™ 705CGNF Nitrile Palm
Cut Level 3
4542
120
West Chester Glove Cut Resistance Information Tables
Glove SKU #
112
Description
Cut Resistance Guide
Glove SKU #
Description
ANSI/ISEA 105
EN 388
Page #
GNSPBS301X
Polar Bear® Supreme Heavy Duty Gloves
Cut Level 5
Cut Level 5
121
ANS11-501
HyFlex® 11-501 CR+
Cut Level 4
Cut Level 4
114
ANS11-511
HyFlex® 11-511 Intercept Technology® with Kevlar®
Cut Level 4
Cut Level 4
114
ANS97-505
Ansell 97-505 Construction Cut Protection Glove
Cut Level 4
N/A
115
ANS80-813
PowerFlex® 80-813 Flame Resistant & Cut Protection
Cut Level 4
Cut Level 5
115
ANS70-765
Ansell 70-765 Leather Palm Cut Protection Glove
Cut Level 4
Cut Level 4
115
ANS11-500
HyFlex®
Cut Level 2
Cut Level 2
154
ANS11-510
HyFlex®
11-510 DuPont™
Cut Level 2
Cut Level 3
114
ANS11-624
HyFlex®
11-624 Dyneema
Cut Level 2
Cut Level 3
115
ASTM F1790 (CPPT)
CE/EN 388
Page #
11-500 CR
Kevlar®
Stretch Liner
Wells Lamont Glove Cut Resistance Information Tables
Glove SKU #
Description
WHZ13452X
The Whizard® Silver Talon® Standard
Cut Level 5
N/A
122
WHZ1347XX
The Whizard® Silver Talon® Master Grip
Cut Level 5
N/A
122
WHZ33302X
WHZ13485X
WHZ133XXX
The
Whizard®
Handguard®
II White
Cut Level 5
N/A
122
The
Whizard®
Handguard®
II Gray
Cut Level 5
N/A
122
The
Whizard®
Cut Level 5
N/A
122
Heavy Duty
Slipguard®
113
Cut Resistant Hand Protection
Ansell Glove Cut Resistance Information Tables
A. HyFlex® 11-500 CR with Kevlar® Glove
HyFlex® CR has a cut-resistant stretch Kevlar® liner; is coated with unique, foam nitrile; and is
an excellent choice when working with sharp-edged materials and tools. The stretch Kevlar®
lining provides a comfortable fit with excellent protection from nuisance nicks and abrasion
and the extended cuff offers extra cut protection around the wrist. The foam nitrile coating
channels away oil from the surface of the gloves, providing a sure grip in light oil applications
and features a soil-hiding black palm coating. ANSI/ISEA 105 - Cut Level 2, EN 388 - Cut Level
2
SKU
Description
Size
UOM
ANS11-500
HyFlex CR with Kevlar Glove
6-11
DZ
B
A
Price
$72.20
B. HyFlex® 11-501 CR+ Intercept Technology Glove
Featuring Intercept Technology, jointly developed by Ansell and DuPont, this yarn incorporates
Kevlar® Stretch Armor Technology for an unprecedented combination of superior cut resistance and outstanding dexterity. Superior HyFlex oil grip, tactile sensitivity, dexterity and comfort. Cut prevention improves productivity, profitability and employee morale. ANSI/ISEA 105
- Cut Level 4, EN 388 - Cut Level 4
SKU
Description
Size
UOM
ANS11501-7
ANS11501-8
ANS11501-9
ANS11501-10
ANS11501-11
HyFlex CR+ intercept technology
7
8
9
10
11
DZ
DZ
DZ
DZ
DZ
C. HyFlex® 11-510 DuPont™ Kevlar® Stretch Liner With Spandex
Price
$169.00
$169.00
$169.00
$169.00
$169.00
C
The Ansell 11-510 DuPont™ Kevlar® stretch liner with spandex glove features a patented
Nylon and Kevlar® zonal plaiting on palm and back. To give the wearer a soft feel it also incorporates the ComfortFlex cuff. The black foam nitrile coated palm provides enhanced grip in
light oil conditions and is silicone-free and latex-free for worker and product protection. ANSI/
ISEA 105 - Cut Level 2, EN 388 - Cut Level 3
SKU
Description
Size
UOM
ANS11-510
HyFlex DuPont Kevlar stretch liner with spandex
6-11
DZ
D
Price
$81.86
D. HyFlex® 11-511 Intercept Technology® with DuPont™ Kevlar®
Ansell’s exclusive Intercept Technology® with DuPont™ Kevlar® Stretch Armor. ANSI cut level
4 reduces the risk of injury and related expenses. Offers a redesigned finger length for greater
dexterity, comfort, wear and flexibility. Enhanced Cuff Overedging (ECO) utilizes new yarn
technology and increased elasticity in cuff area. The new proprietary green foam nitrile coating provides workers with the ability to handle sharp parts and knives with confidence in light
oil or dry applications. New coating formulation provides longer wear and is silicone-free and
latex-free for worker and product protection. ANSI/ISEA 105 - Cut Level 4, EN 388 - Cut Level 4
114
SKU
Description
Size
UOM
ANS11-511
HyFlex DuPont Kevlar stretch liner with spandex
7-11
DZ
Price
$194.85
A
A. HyFlex® 11-624 Dyneema Glove
HyFlex® 11-624 gloves feature an exclusive yarn combination of DSM Dyneema®, Spandex
and nylon. HyFlex® 11-624 gloves offer the highest degree of cut protection, yet they are
lightweight, cool, comfortable and highly flexible. A polyurethane black coating provides a
medium high level of abrasion resistance while promoting a sure-grip in dry and wet applications and extending product life by not showing strains from wear. ANSI/ISEA 105 - Cut Level
2, EN 388 - Cut Level 3
Description
Size
UOM
ANS11-624
HyFlex Dyneema
6-11
DZ
B. PowerFlex® 80-813 Flame Resistant & Cut Protection Glove
The first glove to combine high levels of flame resistance, arc flash and cut protection in one
comfortable, ergonomically designed product. The PowerFlex® 80-813 gloves provide exceptional protection for workers with EN 407 Level 4 resistance to flammability, Arc Hazard Level
1 and ANSI Level 4 Cut Protection. The exclusive composite yarn in the PowerFlex® 80-813
has a glass fiber core that provides a high level of cut protection while dissipating electrostatic
charges. All components of the glove are inherently flame resistant, not chemically applied,
therefore maintaining their protective properties throughout the life of the product—even after
multiple launderings. All of this protection is in a glove so comfortable, workers will want to
wear it all day. ANSI/ISEA 105 - Cut Level 4, EN 388 - Cut Level 5
SKU
Description
Size
UOM
ANS80-813
PowerFlex flame resistance, arc flash cut protection glove
7-11
DZ
C
Price
Price
$104.12
B
FR
Cut Level 4
$203.32
C. Ansell 97-505 Construction Cut Protection Glove
This premium glove has at least 8 times more cut protection than most popular leather and
construction gloves. Featuring Stretch Armor Yarn – a unique combination of DuPont™
Kevlar® and Ansell Intercept Technology® and a foam nitrile coating delivers great wear and
grip. Designed to deliver comfort, bare hand dexterity and excellent cut resistance. ANSI/ISEA
105 - Cut Level 4
SKU
Description
Size
UOM
ANS97-505
Construction cut protection glove
8-10
PR
D. Ansell 70-765 Leather Palm Cut Protection Glove
Advanced cut protection combined with premium leather for superior grip. Durable leather pad
double-stitched with DuPont™ Kevlar® fiber to ensure superior grip and protection against
sharp snags and punctures. Engineered yarns provide high cut protection-to-weight ratio. Tengauge, medium weight cut resistant yarn and reinforced thumb crotch. Protection all the way to
the fingertips. Protects hands from intermittent heat contact up to 200ºF. ANSI/ISEA 105 - Cut
Level 4, EN 388 - Cut Level 4
SKU
Description
Size
UOM
ANS70-765
Construction high performance string knit gloves with leather palm
8-11
DZ
Price
$18.97
D
Price
$199.18
115
SKU
A
A. Tacto™ Touch Screen Gloves
The Tacto™ glove feature conductive threads in the index, middle and thumb allow for use with
touch screen devices without removing gloves. The HPPE lightweight and comfortable shell
provides ANSI 2 cut protection while the elastic wrist helps keep dirt and debris out. PU palm
coating helps provide enhanced tactile sensitivity and high levels of dexterity.
SKU
Description
Size
UOM
WCH713HUTS
Tacto™ touch screen gloves
S-2X
DZ
Price
$89.47
B
B. Kevlar® Gloves with Nitrile Palms
Kevlar/lycra string knit gloves with foam nitrile coated palms. ASTM F1790 (CPPT) - Cut Level
2, CE/EN 388 - Cut Level 2
SKU
Description
Size
UOM
MSG3055
MSG3055XL
Kevlar/lycra string knit gloves, nitrile palm coated
Kevlar/lycra string knit gloves, nitrile palm coated
S-L
XL
DZ
DZ
Price
$71.41
$71.41
C
C. Power-Cor Latex Palm Coated Kevlar® Gloves
Kevlar® string knit gloves with premium latex coated palms. ASTM F1790 (CPPT) - Cut Level
3, CE/EN 388 - Cut Level 4
SKU
Description
Size
UOM
MSG3050
MSG3050XL
100% Kevlar String knit gloves, crinkle finish latex palm coated
100% Kevlar String knit gloves, crinkle finish latex palm coated
S-L
XL
DZ
DZ
D
D. Leather Palm Kevlar® Gloves
100% Kevlar, 7-Gauge shell with premium side split leather palm.
SKU
Description
Size
UOM
MSG3090L
MSG3090XL
MSG3095L
100% Kevlar shell, premium side split leather palm
100% Kevlar shell, premium side split leather palm
Economy plaited Kevlar/Cotton Shell with Shoulder Leather Palm
L
XL
L
DZ
DZ
DZ
116
Price
$132.46
$132.46
$94.33
Price
$91.57
$94.33
A. Kevlar®/Cotton & 100% Kevlar® String Knit Gloves
A
Dupont Kevlar for high tensile strength relative to its weight - up to five times stronger than
steel. Will not melt, ignite or conduct electricity. High durability in cut resistance. High comfort
level. Allows manual dexterity. Made with FDA approved materials for use in food processing
applications. Use as gloves or glove liners. Kevlar outside/cotton Inside. Regular weight. The
100% Kevlar cut-resistant, string knit gloves are 7 gauge, medium weight. Gloves are reversible.
MSG3060: ASTM F1790 (CPPT) - Cut Level 2
Description
Size
UOM
Kevlar/cotton gloves
Kevlar/cotton gloves
100% Kevlar string knit gloves
100% Kevlar string knit gloves
S
L
S-L
XL
DZ
DZ
DZ
DZ
B
Price
$34.92
$34.92
$64.81
$68.48
B. Kevlar®/Cotton & 100% Kevlar® PVC Dotted String Knit Gloves
Kevlar/cotton and 100% Kevlar string knit gloves are 7 gauge, medium weight and feature PVC
dotted on two sides. Perfect for protection against sharp slippery surfaces. Gloves are cutresistant and reversible.
SKU
Description
Size
UOM
MSG3065
MSG3065XL
MSG3075
MSG3075XL
Kevlar/cotton PVC dotted gloves
Kevlar/cotton PVC dotted gloves
100% Kevlar PVC dotted string knit gloves
100% Kevlar PVC dotted string knit gloves
XS-L
XL
S-L
XL
DZ
DZ
DZ
DZ
Price
$41.61
$41.61
$66.19
$69.85
C
C. 100% Kevlar® Fingerless Gloves
100% Kevlar cut-resistant, string knit gloves are regular weight. Gloves are reversible.
SKU
Description
Size
UOM
MSG3079
100% Kevlar fingerless gloves
S-L
DZ
D
Price
$48.84
D. 100% Kevlar® PVC Dotted Fingerless String Knit Gloves
100% Kevlar string knit gloves are 7 gauge, medium weight and feature PVC dotted on 2 sides.
Gloves are cut resistant and reversible.
SKU
Description
Size
UOM
MSG3076
MSG3076XL
100% Kevlar PVC dotted fingerless gloves
100% Kevlar PVC dotted fingerless gloves
M-L
XL
DZ
DZ
Price
$56.35
$56.35
117
SKU
MSG3060S
MSG3060L
MSG3070
MSG3070XL
MONARCH™
The MONARCH series features TAEKI 5™ fiber, which is a unique engineered fiber with remarkable physical properties. Taeki 5 fiber is a strong,
durable, and cut-resistant multi-filament fiber created by combining Synthetic Fibers, Glass Fiber and Spandex. MONARCH™ gloves made with Taeki 5 fiber exhibit high degrees of flexibility, comfort and cut protection. All
MONARCH styles made with Taeki 5 fiber provide CE Cut Level 5 protection.
A. Monarch™ White Polyurethane Palm Coating
White, 13-Gauge Shell, Made with Taeki 5 Fiber, White Polyurethane Palm Coating. ASTM
F1790 (CPPT) - Cut Level 3, CE/EN 388 - Cut Level 5
A
SKU
Description
Size
UOM
Price
MSG3750
MSG3750XL
Monarch™ white polyurethane palm coating, cut level 5
Monarch™ white polyurethane palm coating, cut level 5
S-L
XL
PR
PR
$7.14
$7.14
B
B. Monarch™ Black Polyurethane Palm Coating
Black, 13-Gauge Shell, Made with Taeki 5 Fiber, Black Polyurethane Palm Coating. ASTM
SKU
Description
Size
UOM
Price
MSG3752
MSG3752S
MSG3752XL
MSG37522X
Monarch™ black polyurethane palm coating, cut level 5
S-L
XL
2X
PR
PR
PR
$8.54
$8.54
$8.54
C
C. Monarch™ Black HCT-Nitrile Coating
Salt & Pepper, 13-Gauge Shell, Made with Taeki 5 Fiber, Black HCT-Nitrile Coating. ASTM
SKU
Description
Size
UOM
Price
MSG3755
MSG3755XL
Monarch™ HCT-nitrile coating, cut level 5
Monarch™ HCT-nitrile coating, cut level 5
S-L
XL
PR
PR
$9.35
$9.35
D. Monarch™ Split Leather Palm
Salt & Pepper, 10-Gauge Shell, Made with Taeki 5 Fiber with Split Leather Palm. Stitched with
Kevlar Thread. ASTM F1790 (CPPT) - Cut Level 4, CE/EN 388 - Cut Level 5
SKU
Description
Size
UOM
MSG3757
MSG3757XL
MSG3757XXL
MSG37572X
Monarch™ split leather palm, cut level 5
S-L
XL
2X
PR
PR
PR
D
Price
$13.43
$13.43
$13.43
E
E. Monarch™ Black Crinkle Latex Coating
Black, 13-Gauge Shell, Made with Taeki 5 Fiber with Black Crinkle Latex Coating. ASTM F1790
(CPPT) - Cut Level 3, CE/EN 388 - Cut Level 5
118
SKU
Description
Size
UOM
Price
MSG3758
MSG3758XL
Monarch™ NRL-black crinkle latex coating, cut level 5
Monarch™ NRL-black crinkle latex coating, cut level 5
S-L
XL
PR
PR
$8.98
$8.98
Level One - Red Zone Defense Gloves - minimum cut protection. Use for maintenance, box handling, transport, light assembly, and light engineering. Do not use with sharp objects, knives, or saws.
A. Zone Defense™ 701CRNF Nitrile Palm
Zone Defense™ Red nylon shell with black nitrile palm coat for minimal cut protection and
enhanced tactile sensitivity and excellent dexterity. Features and benefits include: part of Zone
Defense color coded cut resistant glove program, nitrile coating, knit wrist, machine washable,
antibacterial, silicone free and EN 388=3132; ANSI 1, 221 gms.
SKU
Description
Size
UOM
WCHE701CRN
Zone Defense Glove, Nitrile Coating, EN 388=3132; ANSI 1
S-XL
DZ
B
Price
$33.52
B. Zone Defense™ 701CRLB Crinkle Latex Palm
Zone Defense™ Red Poly/Cotton shell with black latex palm coat for minimal cut protection and
enhanced tactile sensitivity and excellent dexterity. Features and benefits include: part of Zone
Defense color coded cut resistant glove program, crinkle latex coating, knit wrist, machine
washable, antibacterial, silicone free and EN 388=3142; ANSI 1, 480 gms.
SKU
Description
Size
UOM
WCHE701CRL
Zone Defense Glove, Crinkle Latex Coating, EN 388=3142; ANSI 1
M-2X
DZ
Price
$29.05
C
C. Zone Defense™ 701CRPB Polyurethane Palm
Zone Defense™ Red nylon shell with black PU palm coat for minimal cut protection and enhanced tactile sensitivity and excellent dexterity. Features and benefits include: part of Zone
Defense color coded cut resistant glove program, polyurethane coating, knit wrist, machine
washable, antibacterial, silicone free and EN 388 = 4131; ANSI 1, 267 gms.
SKU
Description
Size
UOM
WCHE701CRP
Zone Defense Glove, Polyurethane Coating, EN 388=3132; ANSI 1
S-2X
DZ
Price
$29.39
119
A
Level Two - Orange Zone Defense Gloves - good cut protection. Use for handling sharp objects,
material handling, automotive, and construction.
A
A. Zone Defense™ 703CONF Nitrile Palm
Zone Defense™ Orange HPPE shell with black foam nitrile palm coat. HPPE fiber is 10 times
stronger than steel and 40% stronger than blended fabric. Features and benefits include: part of
Zone Defense color coded cut resistant glove program, foam nitrile coating, knit wrist, machine
SKU
Description
Size
UOM
WCHE703CON
S-2X
DZ
Price
$112.29
B
B. Zone Defense™ 703COPB Polyurethane Palm
Zone Defense™ Orange HPPE shell with black PU palm coat. HPPE fiber is 10 times stronger
than steel and 40% stronger than blended fabric. Features and benefits include: Part of Zone
Defense color coded cut resistant glove program, polyurethane coating, knit wrist, machine
SKU
Description
Size
UOM
Price
WCHE703COP
Zone Defense Glove, Polyurethane Coating, EN 388=434; ANSI 2
S-2X
PR
$9.36
Level Three - Green Zone Defense Gloves - maximum cut protection. Use for handling very sharp
objects, glass handling, metal assembly, heavy assembly, and tool handling.
C
C. Zone Defense™ 705CGLB Latex Palm
Zone Defense™ Green HPPE shell with black latex palm coat for maximum cut protection and
enhanced tactile sensitivity and excellent dexterity. Features and benefits include: heavy duty
green hi vis shell, crinkle latex coating is flexible with good tensile strength, knit wrist, machine
washable, antibacterial, silicone free and EN388 = 4543; ANSI 5, 3805 gms.
SKU
Description
Size
UOM
WCHE705CGL
Zone Defense Glove, Latex Coating, EN388 = 4543; ANSI 5
M-2X
DZ
D
D. Zone Defense™ 705CGNF Nitrile Palm
Zone Defense™ Bright Green HPPE shell with black Nitrile palm coat. HPPE fiber is 10 times
stronger than steel and 40% stronger than blended fabric. Features and benefits include: part
of Zone Defense color coded cut resistant glove program, nitrile coating, knit wrist, machine
washable, antibacterial, silicone free and EN 388=4542; ANSI 3 1120 gms.
SKU
Description
Size
UOM
WCHE705CGN
S-2X
DZ
120
Price
$148.25
Price
$201.77
A
A. White Dyneema® Shell/Polyurethane Palm Coated Gloves
SKU
Description
Size
UOM
Price
MSG3700
MSG3700XL
MSG37002X
MSG3710
MSG3710XL
Dyneema shell/polyurethane coated, premium cut resistant
Dyneema shell/polyurethane coated, standard cut resistant
S-L
XL
2X
S-L
XL
PR
PR
PR
PR
PR
$9.26
$9.35
$9.35
$8.17
$8.24
B
B. Gray Dyneema® Shell/Polyurethane Palm Coated Gloves
MSG3700G: ASTM F1790 (CPPT) - Cut Level 1, CE/EN 388 - Cut Level 4
MSG3710G: ASTM F1790 (CPPT) - Cut Level 1, CE/EN 388 - Cut Level 3
SKU
Description
Size
UOM
MSG3700G
MSG3700GXL
MSG3700G2X
MSG3710G
MSG3710GM
MSG3710GXL
XS-L
XL
2X
S-L
XL
PR
PR
PR
PR
PR
Price
$10.28
$10.28
$10.17
$8.24
$8.24
C
C. Premium Dyneema® Cut Resistant Gloves
Premium cut resistant gloves, made with Dyneema® yarn, nitrile palm coated for additional
abrasion and liquid resistance. ASTM F1790 (CPPT) - Cut Level 2, CE/EN 388 - Cut Level 3
SKU
Description
Size
UOM
MSG3760
MSG3760XL
Premium cut resistant gloves, Dyneema yarn nitrile palm
Premium cut resistant gloves, Dyneema yarn nitrile palm
S-L
XL
PR
PR
Price
$11.28
$11.28
D
D. Dexterity Palm Coated Cut Resistant Gloves
Cut-resistant 13-gauge knit is highly dexterous, yet provides stellar cut protection. Composite
blend of Kevlar® wrapped around silica-infused fiber provides ASTM level-4 cut protection,
withstanding 2230 grams of cut force during testing.
SKU
Description
Size
UOM
Price
MSGS13KFGF
Palm nitrile coated cut resistant gloves
7-10
PR
$6.93
121
Cut resistant gloves feature high performance Dyneema fiber, and string knit shell construction
with polyurethane coated palms. They are more flexible, comfortable and conduct heat and
moisture better than others. Because Dyneema is unaffected by water or detergents, and is
highly-resistant to abrasion, these gloves can be washed and re-used without any loss of cut
resistance. Made with USDA/FDA accepted materials for use in food processing applications.
MSG3700: ASTM F1790 (CPPT) - Cut Level 1, CE/EN 388 - Cut Level 3
MSG3710: ASTM F1790 (CPPT) - Cut Level 1, CE/EN 388 - Cut Level 3
A. The Whizard® Silver Talon® Standard
A
The Whizard Silver Talon is considered the number one glove within the meat and poultry industries. The patented yarn composition combines high strength, high performance materials
with stainless steel, creating excellent tensile strength and superior cut protection. The Silver
Talon is also available with a leather palm or urethane grip pattern for applications requiring
precise gripping capabilities. Features include: High level of comfort and dexterity, outstanding
wear for a long service life, pre-washed, preshrunk and made in USA. ASTM F1790 (CPPT)
- Cut Level 5
SKU
Description
Size
UOM
WHZ134525
WHZ134526
WHZ134527
WHZ134528
WHZ134529
Silver Talon glove standard grip
XS
S
M
L
XL
EA
EA
EA
EA
EA
B. The Whizard® Silver Talon® Master Grip
SKU
Description
Hand
Size
UOM
WHZ134769
WHZ134770
WHZ134772
WHZ134773
WHZ134775
WHZ134776
WHZ134778
WHZ134779
Silver Talon glove Master Grip
Left
Right
Left
Right
Left
Right
Left
Right
S
S
M
M
L
L
XL
XL
EA
EA
EA
EA
EA
EA
EA
EA
C
Price
B
$26.98
$26.98
$26.98
$26.98
$26.98
$26.98
$26.98
$26.98
C. The Whizard® Handguard® II
The Whizard Handguard II is the original heavy duty, cut resistant glove. Handguard II uses a
unique combination of ultra-high-strength Spectra®, Vectran® and stainless steel to provide
the ultimate in hand protection against cuts and slashes. Ideal for meat, poultry and seafood
processing, material handling and deli slicer cleaning. No other glove offers this level of protection! Features include: 3” cuff for extra protection, outstanding wear for a long service life,
prewashed, preshrunk and made in USA. ASTM F1790 (CPPT) - Cut Level 5
SKU
Description
Size
UOM
WHZ333021
WHZ333023
WHZ333025
WHZ333027
WHZ134853
WHZ134854
WHZ134855
WHZ134856
Handguard II, heavy duty, cut resistant glove, white
Handguard II, heavy duty, cut resistant glove, gray
S
M
L
XL
S
M
L
XL
EA
EA
EA
EA
EA
EA
EA
EA
D. The Whizard® Heavy Duty Slipguard®
The Whizard Heavy Duty Slipguard combines heavy duty cut protection and slip resistance.
Based on the Handguard® II construction, Heavy Duty Slipguard uses a unique combination of
ultra-high-strength fibers and stainless steel to provide the ultimate in hand protection against
cuts and slashes. The polyurethane grip pattern provides a no-slip grip. Ideal for use with
glass, metal, knives or other sharp, slippery surfaces. Features include: outstanding wear for a
long service life, prewashed, preshrunk and made in USA. ASTM F1790 (CPPT) - Cut Level 5
SKU
Description
Hand
Size
UOM
WHZ133791
WHZ133792
WHZ133795
WHZ133796
WHZ133799
WHZ133800
WHZ133803
WHZ133804
Heavy Duty Slipguard
Left
Right
Left
Right
Left
Right
Left
Right
S
S
M
M
L
L
XL
XL
EA
EA
EA
EA
EA
EA
EA
EA
122
Price
$14.11
$14.11
$14.11
$14.11
$14.11
D
Price
$25.30
$25.30
$25.30
$25.30
$25.30
$25.30
$25.30
$25.30
Price
$18.89
$18.89
$18.89
$18.89
$18.89
$18.89
$18.89
$18.89
A
A. Level Six Nitrile Rubber Coated
Level Six Series gloves set the new standard for hand protection by combining industrial puncture protection with industry leading cut resistance. Made with SuperFabric® brand material
for the highest cut–resistance available on the market- Exceeds ISEA/CE Level 5 (in noted
enhanced areas). Innovative industrial puncture protection on enhanced areas from wires,
metal, wood, and glass. Comfortable cotton blend shell with wrinkle rubber palm coating for
exceptional dexterity and feel.
Description
Size
UOM
Level Six glove nitrile palm coated, cut level 5
S-XL
2X
PR
PR
Price
$15.36
$17.85
HexArmor Protection Zone- ISEA CUT: 5
B
B. Level Six Nitrile Palm Coated
Level Six Series gloves set the new standard for hand protection by combining industrial puncture protection with industry leading cut resistance. HexArmor® products are engineered to
provide the highest levels of protection in areas where risk is the greatest. Experience the
Science of Safety™ that has helped reduce injuries and lower PPE costs in the harshest work
environments. Made with SuperFabric® brand material for the highest cut–resistance available
on the market- Exceeds ISEA/CE Level 5 (in noted enhanced areas). Cut-resistant HPPE shell
with flat nitrile palm coating for great oily or dry grip- ISEA Level 4
SKU
Description
Size
UOM
HEX9010
HEX9010XL
HEX90102X
S-L
XL
2X
PR
PR
PR
Price
$26.52
$26.52
$31.37
HexArmor Protection Zone- ISEA CUT: 5
HPPE Shell - ISEA CUT: 4
C
C. BladeMaster Ultimate
The HexArmor® BladeMaster 8020 combines a knit cut resistant shell with added high cut and
puncture protection on the palm, fingers, and knuckle area. The palm has leather over cut and
puncture resistant material, providing excellent grip for oily applications. Gloves are long lasting and durable because stitching is not exposed.
SKU
Description
Size
UOM
HEX8020
HEX8020XL
HEX80202X
Blademaster glove leather palm cut level 5
M-L
XL
2X
PR
PR
PR
Price
$51.54
$51.54
$51.54
HeArmor Protection Zone - ISEA CUT: 5
DuPont™ Kevlar® Shell - ISEA CUT: 1
123
SKU
HEX9011
HEX90112X
A
A. 4020 GGT5®
Introducing the 4020 GGT5®, the most complete glove for the oil and gas industry. Gator Grip
Technology® is a design platform that combines high performance materials engineered to
provide industry-leading cut and puncture protection, and the strongest grip in any oil situation.
SKU
Description
Size
UOM
HEX4020
HEX4020XL
HEX40202X
HEX40203X
GGT5 glove green/yellow palm cut level 5
S-L
XL
2X
3X
PR
PR
PR
PR
Price
$48.55
$48.55
$54.22
$54.22
B
Hand Protection Impact-Reducing
HexArmor Protection Zone - ISEA CUT:5 CE 4542
Impact Protection
B. 4021X GGT5®Mud
Introducing the 4021 GGT5®, the most complete glove for the oil and gas industry. Mud Grip
Technology® is a design platform that combines high performance materials engineered to
provide industry-leading cut and puncture protection, and strong grip in light/medium oil situations.
SKU
Description
Size
UOM
HEX4021
HEX4021XL
HEX40212X
HEX40213X
GGT5 Mud Grip glove orange palm cut level 5
S-L
XL
2X
3X
PR
PR
PR
PR
C
Price
$51.53
$51.53
$58.02
$58.02
Impact Protection
C. Chrome™ Series: Cut Level 5 Impact Hi-Vis
Over 25 times the cut resistance of the mechanics’ gloves you’re wearing right now, and over
10 times the cut resistance of Kevlar®! Sound crazy? Not with the Chrome Series™ from
HexArmor. We’ve invested millions of dollars perfecting technology and PPE designs to shatter current ratings for cut and abrasion resistance. It’s time to ditch the flashy, non-protective
mechanics’ gloves, and upgrade to the Chrome Series™.
SKU
Description
Size
UOM
HEX4026
HEX4026XL
HEX40262X
HEX40263X
Chrome Series glove hi-viz green cut level 5 impact
S-L
XL
2X
3X
PR
PR
PR
PR
Price
$39.31
$39.31
$45.81
$45.81
D
Impact Protection
D. Rig Lizard® 2021
The Rig Lizard® sets a new precedent for oil, gas, and mining safety gloves. HexArmor’s
advanced TP-X™ technology combines the unmistakable grip advantages of a synthetic palm
with the scientific innovation that made HexArmor® the thought leader in PPE development.
After safety supervisors across the industry helped identify common on-site hazards, anything
less than our full-hand Impact Exoskeleton™ simply would not suffice. Combine these features with a pre-curve design, double palm stitch, and HexArmor’s maximum-comfort fingertip design, and you’ve unlocked the dexterity and protection needed for optimum performance.
SKU
Description
Size
UOM
HEX2021
HEX20202X
HEX20212X
Rig Lizard glove cut level 3 impact
Rig Lizard glove cut level 3 impact
XS-XL
2X
PR
PR
Price
$34.01
$37.67
Impact Protection
124
A
A. OGRE™
The 7700 OGRE™ Glove features a hi-vis green back, orange synthetic leather palm and raised
silicone dots. Also available with Micro-Porous Hipora® inserts
SKU
Description
Size
UOM
MSG7700
MSG7701
MSG7710
OGRE Glove, Orange Synthetic Leather Palm, Hi-Vis Green Back
OGRE Glove, Orange Synthetic Leather Palm, Hi-Vis Orange Back
OGRE Glove, Orange Synthetic Leather Palm, Hipora Inserts
M-3X
M-3X
M-3X
PR
PR
PR
Price
$27.60
$27.00
$30.91
B. OGRE™ Corded Canvas Palm
The 7720 & 7730 OGRE™ Glove features a hi-vis green back, corded canvas palm and MicroPorous Hipora® Inserts.
SKU
Description
Size
UOM
MSG7720
MSG7730
OGRE Glove, Corded Canvas Palm
OGRE Glove, Corded Canvas Palm, Hipora Inserts
M-3X
M-3X
PR
PR
Price
$23.19
$27.44
C
C. OGRE-KV™
The OGRE-KV™ Glove features a Kevlar® reinforced fabric palm reinforced thumb crotch, lime
four-way stretch spandex back, TPR knuckles, fingers, back of hand, wrist, and pull tab and
neoprene cuff with gusset. ANSI Cut Level 3, 1038 Grams
SKU
Description
Size
UOM
MSG7740
OGRE-KV Glove, Kevlar® Reinforced Fabric Palm
M-3X
PR
Price
$31.58
D
D. OGRE-Impact™
The 7735 OGRE-Impact™ Glove features a hi-vis lime nylon shell, black sandy nitrile palm
coating, interior foam palm padding, Kevlar® reinforced thumb crotch and Thermo-Plastic
Rubber (TPR) reinforced fingers, and back of hand.
SKU
Description
Size
UOM
MSG7735
OGRE-Impact Glove, Lime Nylon Shell, Nitrile Palm
M-2X
PR
Price
$15.79
E
E. COLOSSUS™
The Colossus™ features a hi-vis orange spandex back, foam metacarpal padding, padded
reactive knuckle strap, synthetic leather palm with PVC reinforcement, TPR fingers, neoprene
cuff, hook & loop closure and elastic pull cord.
SKU
Description
Size
UOM
MSG7745
COLOSSUS Glove, Foam Metacarpal Padding
M-3X
PR
Price
$17.55
125
Impact-Reducing Hand Protection
B
A
A. R2 Safety Rigger Glove with Long Neoprene Cuff - Orange
Hand Protection
R2 Safety has 4 way stretch spandex in back of hand, Parity™ synthetic leather palm with
Clarino™ palm and finger patches, TRP knuckle, finger and back of hand protection, extended
Kevlar® reinforced thumb saddle, Parity™ synthetic forchettes, oil resistant palm with hi
vis red silicone pattern for better visibility and grip, ID tag on cuff to place name to protect
investment, neoprene cuff with spandex for added comfort.
Features:
•TPR finger, hand and knuckle guards to protect against bumps & bruises
•Reinforced thermoplastic fingertips to reduce pinches; extended Kevlar™ reinforced thumb
saddle
•Flexible 4-way stretch form fitting spandex back with Hi Visibility fabric and oil resistant
palm providing excellent grip in wet applications
SKU
Description
Size
UOM
WCHE86712
WCHE86712XL
WCHE867122X
WCHE867123X
R2 safety rigger glove with long neoprene cuff - orange
S-L
XL
2X
3X
PR
PR
PR
PR
B. R2 Safety Rigger Glove with Hook & Loop Elastic Wrist – Orange
Price
$31.35
$31.35
$31.35
$31.35
B
Impact-Reducing
R2 Safety has 4 way stretch spandex in back of hand, Parity™ synthetic leather palm with
Clarino™ palm and finger patches, TRP knuckle, finger and back of hand protection, extended
Kevlar® reinforced thumb saddle, Parity™ synthetic forchettes, oil resistant palm with hi
vis red silicone pattern for better visibility and grip, ID tag on cuff to place name to protect
investment, neoprene cuff with spandex for added comfort.
Features:
•Reinforced thermoplastic fingertips to reduce pinches; extended Kevlar™ reinforced thumb
saddle
palm providing excellent grip in wet applications
SKU
Description
Size
UOM
WCHE86713
WCHE86713XL
WCHE867132X
WCHE867133X
R2 safety rigger glove with hook & loop elastic wrist – orange
S-L
XL
2X
3X
PR
PR
PR
PR
C
Price
$33.70
$33.70
$33.70
$33.70
C. R2 Winter Fleece Orange
R2 Winter Glove has 4 way stretch spandex in back of hand, Parity™ synthetic leather palm
with Clarino™palm and finger patches, TPR knuckle, finger and back of hand protection, Kevlar® reinforced thumb saddle, Parity™ synthetic forchettes, oil resistant palm with silicone
pattern that provides excellent grip, fleece lining for warmth, waterproof Enprotex® lining, ID
tag on cuff to place name to protect investment, neoprene extended safety cuff with spandex
for added comfort
Features:
•Reinforced thermoplastic fingertips to reduce pinches; Kevlar reinforced thumb saddle
palm providing excellent grip in wet applications, fleece lining with Enprotex®
SKU
WCHE86711
WCHE86711XL
WCHE867112X
126
Description
R2 winter fleece orange
Size
UOM
M-L
XL
2X
PR
PR
PR
Price
$37.50
$37.50
$37.50
A
A. R-24
The R-24 Glove features TPR impact protection on top of hand and full length of fingers,
extended neoprene cuff with TPR wrist bone impact protection, NEW super tough, tacky grip
system and full dorsal 3mm impact absorbing foam layer. CE Rated 4121, Level 1 Cut and
Puncture Resistance
Description
Size
UOM
RGG247-
R-24 Glove, TPR Impact Protection
S-3X
PR
Price
$29.47
B
B. Roughneck
The Roughneck glove features a TPR impact protection on top of hand and full length of fingers, high visibility for increased safety, CE rated 4232, level 2 cut and puncture resistance,
TefLoc Grip System on palm & fingers resists oil & enhances grip and extended Neoprene Wrist
Closure with SuperCuff Technology.
SKU
Description
Size
UOM
RGG267-
Roughneck Glove, Glove, TPR Impact Protection
S-3X
PR
Price
$52.00
C
C. Roughneck KevLoc
The Roughneck KevLoc glove features TPR impact protection on top of hand and full length
of fingers, high visibility for increased safety, KevLoc grip system on palm & fingers that
enhances grip, extended neoprene wrist closure with SuperCuff technology and is CE Rated
4343, Level 3 Cut and Puncture Resistance.
SKU
Description
Size
UOM
RGG297-
Roughneck KevLoc glove, impact protection, cut level 3
S-3X
PR
D
Price
$39.82
D. ProFlex® 925F(x) Dorsal Impact-Reducing Gloves
Maximum back-of-hand impact protection meets superior abrasion resistance, dexterity and
grip. Features include molded TPR armor on knuckles, fingers and carpal bone for impact
protection, pinch injury prevention, and blow deflection. Armor “flex zones” for high dexterity.
5 mm EVA dorsal pad protects vulnerable metacarpal region and 5 mm EVA palm and ulnar
padding protects against “chopping” blows. Abrasion-resistant PVC on palm and 3 fingers
limits liquid penetration. Non-slip Armortex® reinforcement zones on thumb saddle and index
finger for enhanced grip and durability. Reinforced Kevlar palm stitching for extended wear and
durability and reflective accents and hi-vis color scheme for optimal hand visibility. Contoured
neoprene cuff with reflective pull-on tab resists snagging while offering a secure fit and easy
on/off. Patent pending
SKU
Description
Size
UOM
ERG925F
ERG925FXL
ERG925F2X
ERG925WP
ERG925WPXL
ERG925WP2X
Trades dorsal impact gloves
Trades gloves dorsal impact thinsulate lined
S-L
XL
2X
S-L
XL
2X
PR
PR
PR
PR
PR
PR
Price
$36.75
$36.75
$36.75
$49.04
$49.04
$49.04
127
Impact-Reducing Hand Protection
SKU
A
A. ProFlex® 750 At-Heights Construction Gloves
At-Heights Construction Gloves: Comfort, durability and protection to climb; fit and dexterity to
do the job once you're up there. Features double layer palm and fingertips: Amara underneath
revolutionary Rovenica® for unparalleled strength and durability. EVA foam padding on upper
palm, base and middle digit sections provides comfort for climbing and rope work while maintaining superior dexterity at fingertips. Rugged stretch spandex shell for comfort and fit with
double-needle Kevlar stitching on palm and fingers for extended wear and durability. Perforated
neoprene knuckle pad and cuff offer breathable protection, convenient pass-through hole on
cuff for clipping to carabiner. Adjustable wrist cinch anchor for extra security and reflective
binding allows gloves to be easily located at night.
Hand Protection Performance
SKU
Description
Color
Size
UOM
ERG750TAN
ERG750TANXL
ERG750TAN2X
At-Heights construction gloves
Black/Tan
Black/Tan
Black/Tan
S-L
XL
2X
PR
PR
PR
Price
$44.04
$44.04
$44.04
B
B. ProFlex® 818WP Thermal Waterproof Utility Gloves
Thermal Waterproof Utility: Tough, sure gripping PVC palm and soft spandex cinch cuff. Features Amara synthetic leather with PVC reinforced palm & fingers. 40g 3M™ Thinsulate™ Insulation and Hipora breathable waterproof & windproof liner. Has a Nylon/Spandex cuff with lowprofile closure, breathable spandex back with foam knuckle pad and terry thumb brow wipe.
SKU
Description
Color
Size
UOM
ERG818WP
ERG818WPXL
ERG818WPXXL
Thermal waterproof utility gloves
Black
Black
Black
S-L
XL
2X
PR
PR
PR
Price
$39.47
$39.47
$39.47
C
C. ProFlex® 9000 Certified Lightweight Anti-Vibration Glove
Certified Anti-Vibration with Unique chloroprene rubber palm pad combined with lightweight,
breathable 7-gauge cotton/nylon knit. Features include elastic cuff for secure fit, , re-curved
design provides comfort, dexterity and flexibility and ANSI S3.40/ISO 10819-1996/EN420/
EN388 Certified.
SKU
Description
Size
UOM
ERG9000MD
ERG9000LG
ERG9000XL
ProFlex 9000 Certified Lightweight Anti-Vibration Glove
M
L
XL
PR
PR
PR
D
D. ProFlex® 9015 Certified AV Glove With Dorsal Protection
Certified Anti-Vibration Glove w/ Dorsal Protection offers max impact/vibe protection, plus
tough dorsal guard. Features include patented Nu2O2® polymer pad, pigskin leather palm and
fingers, molded TPR for extra protection on back, low-profile closure with woven elastic cuff,
anti-bacterial treatment and pull-on tab. ANSI S2.73/ISO 10819-1996/EN420 Certified
SKU
Description
Size
UOM
ERG9015
ERG9015XL
ERG9015XXL
ProFlex 9015 certified anti-vibration glove with dorsal protection
S-L
XL
2X
PR
PR
PR
128
Price
$56.58
$56.58
$56.58
Price
$23.33
$23.33
$23.33
A
A. ProFlex® 815 Utility EZ Gloves
Basic protection, dexterity, and comfort. The Utility EZ has a flair cuff for fast on and off with
Amara synthetic leather palm and breathable Air-Mesh back. Reinforced fingertips and terry
thumb brow wipe.
Description
Color
Size
UOM
ERG815B
ERG815BS
ERG815BXL
ERG815BXXL
Utility EZ gloves
Utility EZ gloves
Utility EZ gloves
Black
Black
Black
S-L
XL
2XL
PR
PR
PR
B
Price
$17.89
$17.89
$17.89
B. ProFlex® 710CR Cut Resistant Trades Glove
Superb dexterity, function, and protection for the skilled professional. The ProFlex Trades Glove
710CR are lined with 100% Kevlar® to provide cut resistance throughout the glove while still
maintaining superb dexterity and functionality. They feature Akton visco-elastic polymer to
dampen shock and impact, abrasion resistant, textured PVC on palm and fingers, breathable,
3-layer stretch spandex with neoprene knuckle pad, synthetic leather palm and fingers, terry
thumb brow wipe and reinforced fingertips for optimal durability. The regular ProFlex Trades
Glove are available in a full-finger design and a Touch Control, 3/4-finger on thumb, index, and
middle fingers design.
SKU
Description
Color
Size
UOM
ERG710CR
ERG710CR2X
ERG710
ERG710XXL
ERG720
ERG720XXL
ProFlex® 710CR Cut Resistant Trades Glove, cut level 3
ProFlex® 710CR Cut Resistant Trades Glove, cut level 3
ProFlex® Full finger mechanics glove
ProFlex® Full finger mechanics glove
ProFlex® Touch control mechanics glove
ProFlex® Touch control mechanics glove
Black
Black
Black
Black
Black
Black
S-XL
2X
S-XL
2X
S-XL
2X
PR
PR
PR
PR
PR
PR
ERG710CR
Price
$42.02
$42.02
$28.51
$28.51
$27.63
$27.63
C
C. ProFlex® 820 PVC Handler Gloves
Textured PVC palm and fingertips for a more secure grip in both wet and dry conditions. The
ProFlex PVC Handler feature textured PVC palm and fingertips, breathable, 3-layer stretch
spandex back, low-profile closure with woven elastic cuff, neoprene knuckle pad, terry thumb
brow wipe and pull tab for easy on and off.
SKU
Description
Color
Size
UOM
ERG820
ERG820XL
ERG820XXL
PVC Handler Gloves
PVC Handler Gloves
PVC Handler Gloves
Black
Black
Black
S
XL
2X
PR
PR
PR
D
Price
$24.21
$24.21
$24.21
D. ProFlex® 845 Full-Finger Lightweight Trades Gloves
Tough PVC palms and single layer spandex. Built to handle rough stuff. The Full-Finger Lightweight Trades feature a terry thumb brow wipe, breathable stretch spandex with neoprene
knuckle pads, abrasion resistant PVC on palm and fingers, low-profile closure with woven
elastic cuff, pull tab for easy on and off and full-finger with reinforced fingertips.
SKU
Description
Color
Size
UOM
ERG845
ERG845XL
Full-Finger Lightweight Trades
Full-Finger Lightweight Trades
Black
Black
S-L
XL
PR
PR
Price
$26.93
$26.93
129
Performance Hand Protection
SKU
A
A. CONTACT™ High Dexterity, Nylon, Latex Dipped Gloves
This 13-gauge, high dexterity, green nylon shell with black foam latex coated glove can be
used in applications such as assembly, handling pipes and furniture manufacturing. Safe for
food contact.
SKU
Description
Size
UOM
MSG3991
MSG3991XL
CONTACT™ green with black foam latex
CONTACT™ green with black foam latex
S-L
XL
DZ
DZ
Price
$21.72
$21.72
B
Hand Protection Palm Coated
B. CHARGER™ High Dexterity, Poly/Cotton, Latex Dipped Gloves
This 10-gauge, high dexterity, green cotton/poly shell with black foam latex coated glove can
be used in applications such wire/cable industry, durable goods assembly, and freight handling. Safe for food contact.
SKU
Description
Size
UOM
MSG3995
MSG3995XL
CHARGER™ green with black foam latex
CHARGER™ green with black foam latex
S-L
XL
DZ
DZ
Price
$22.19
$22.19
C
C. COLD SNAP™ High Dexterity, Thermal, Latex Coated Gloves
This 7-gauge, high dexterity, green loop-in, brushed acrylic terry shell with black foam latex
coated palm glove can be used in applications such commercial fishing, cold storage and
construction. Safe for food contact.
SKU
Description
Size
UOM
MSG3999
MSG3999XL
Cold Snap green with black foam latex
Cold Snap green with black foam latex
S-L
XL
DZ
DZ
Price
$46.21
$46.21
D
D. Latex Dipped Work Gloves
Cor-Grip II is a standard, gray 10-gauge glove with a poly/cotton shell and with a gray crinkle
finish latex coating. Made with FDA accepted materials for food processing applications.
SKU
Description
Size
UOM
MSG3895
MSG3895XL
10 gauge poly/cotton shell, textured latex palm coating
S-L
XL
DZ
DZ
Price
$20.59
$20.59
E
E. Premium Blue Latex Dipped Gloves
CorGrip® premium blue latex palm coated string knit gloves with a gray color shell. Made of
10 gauge, gray knit.
130
SKU
Description
Size
UOM
MSG3896
MSG3896XL
S-L
XL
DZ
DZ
Price
$22.41
$22.41
A
A. String Knit Gloves with Blue Latex Palms
Blue latex palm coated gloves are standard weight and have a natural colored string knit shell.
SKU
Description
Size
UOM
MSG3893
MSG3893XL
String knit gloves with blue latex palms
String knit gloves with blue latex palms
S-L
XL
DZ
DZ
Price
$10.09
$10.09
B
10 gauge economy string knit gloves with latex coated palms.
SKU
Description
Size
UOM
MSG3892
MSG3892XL
String knit gloves with green latex palms
String knit gloves with green latex palms
S-L
XL
DZ
DZ
Price
$10.09
$10.09
C
C. PVC Palm Coated String Knit Gloves
Regular weight, natural color string knit gloves. PVC palm coated on one side. Provides abrasion resistance.
SKU
Description
Size
UOM
Price
MSG3870S
MSG3870L
PVC Palm coated, string knit gloves
PVC Palm coated, string knit gloves
S
L
DZ
DZ
$9.35
$9.35
D
D. Tacto™ Hi-Vis Touch Screen Gloves
The Tacto™ glove feature conductive threads in the index, middle and thumb allow for use with
touch screen devices without removing gloves. The hi-vis shell is lightweight and comfortablel
while the elastic wrist helps keep dirt and debris out. PU palm coating helps provide enhanced
tactile sensitivity and high levels of dexterity.
SKU
Description
Size
UOM
WCH713SUTS
Tacto™ hi-vis touch screen gloves
S-2X
DZ
Price
$21.05
E
E. Smitty® Gloves
All-around tough glove that can reduce the number of different gloves that you keep on hand.
Nitrile coating on the palm gives a sure grip on many applications. The coating extends the life
of the glove. A precision blended knit of cotton and acrylic means coolness and comfort for
the wearer.
SKU
Description
Size
UOM
NRG81/1132M
String knit nitrile coated gloves
L
DZ
Price
$28.19
131
Palm Coated Hand Protection
B. String Knit Gloves with Green Latex Palms
A
A. ActivGrip™ Advance by TOWA
The ActivGrip™ Advance has a 13 gauge, gray nylon shell, with a black MicroFinish® nitrile
palm coating.
SKU
Description
Size
UOM
MSGAG581
MSGAG581XL
ActivGrip™ gray nylon shell, black nitrile palm coating
ActivGrip™ gray nylon shell, black nitrile palm coating
S-L
XL
DZ
DZ
Price
$41.25
$43.54
B
B. Cor-Touch™ Nylon Gloves with Nitrile Palms
The Cor-Touch™ gloves are available in white or gray, 13-gauge, polyester shell with gray or
black, flat nitrile palm coating. They are made with FDA accepted materials for food contact
applications.
SKU
Description
Size
UOM
MSG6890
MSG6890XL
MSG6890G
MSG6890GXL
Nylon gloves white color shell with gray nitrile palms
Nylon gloves white color shell with gray nitrile palms
Nylon gloves gray color shell with black nitrile palms
Nylon gloves gray color shell with black nitrile palms
S-L
XL
S-L
XL
DZ
DZ
DZ
DZ
Price
$15.22
$15.22
$15.41
$15.41
C
C. Cor-Touch II™ Polyester Gloves with Nitrile Palms
The Cor-Touch II™ gloves are gray, 13-gauge, polyester shell with gray, flat nitrile palm coating.
They are made with FDA accepted materials for food contact applications.
SKU
Description
Size
UOM
MSG6892
MSG6892XL
Polyester gloves gray color shell with gray nitrile palms
Polyester gloves gray color shell with gray nitrile palms
S-L
XL
DZ
DZ
D
D. Cor-Touch Foam™ Nylon Gloves with Nitrile Coating
The Cor-Touch Foam™ gloves are available gray, 13-gauge, nylon shell with black, foam nitrile
coating. They are made with FDA accepted materials for food contact applications.
SKU
Description
Size
UOM
MSG6893
MSG6893XL
Nylon gloves gray color shell with black foam nitrile coating
Nylon gloves gray color shell with black foam nitrile coating
S-L
XL
DZ
DZ
132
Price
$26.85
$27.13
Price
$10.00
$10.00
CONQUEST
A
™
A. Conquest™
Stretchable Seamless Spandex Shell conforms to hands for exact fit and exceptional comfort.
Flexible Foam Nitrile palm coating provide durability while minimizing hand fatigue. Maximum
tactile sensitivity for precision assembly and handling of small parts. The Conquest Glove
features a gray seamless nylon/spandex shell with a foam nitrile palm coating.
Description
Size
UOM
MSG6905
Conquest Glove Black Nitrile Palm
S-2X
DZ
Price
$31.79
B
B. Conquest™ XTRA
features a gray nylon/spandex shell with a foam nitrile 3/4 coating.
SKU
Description
Size
UOM
MSG6910
Conquest Glove Black Nitrile 3/4 Coating
XS-2X
DZ
Price
$33.53
C
C. Conquest™ PLUS
features a gray nylon/spandex shell with a foam nitrile palm coating with dots.
SKU
Description
Size
UOM
MSG6915
Conquest Glove Black Nitrile Palm and Dots
S-2X
DZ
Price
$35.18
D
D. Conquest™ MAX
features a gray nylon/spandex shell with a foam nitrile 3/4 coating with dots.
SKU
Description
Size
UOM
MSG6920
Conquest Glove Black Nitrile 3/4 Coating and Dots
XS-2X
DZ
Price
$37.77
133
SKU
A
A. Cor-Touch Foam II™ Nylon Gloves with Nitrile Coating
The Cor-Touch Foam™ gloves are available white, 13-gauge, nylon shell with gray, foam nitrile
coating. They are made with FDA accepted materials for food contact applications.
SKU
Description
Size
UOM
MSG6891
MSG6891XL
Nylon gloves white color shell with gray foam nitrile coating
Nylon gloves white color shell with gray foam nitrile coating
S-L
XL
DZ
DZ
Price
$17.25
$17.25
B
B. Glove Black Nylon/Spandex Shell 3/4 Back Nitrile With Dots
COR-TOUCH Xtra™ black nylon/spandex shell, 3/4 back black foam nitrile coating, black nitrile
dots.
SKU
Description
Size
UOM
MSG6899
MSG6899XL
MSG68992X
Glove black nylon/spandex shell 3/4 back nitrile with dots
XS-L
XL
2X
DZ
DZ
DZ
C
Price
$41.47
$41.47
$41.47
C. Cor-Touch Foam Plus
The Cor-Touch Foam Plus Glove has a black 13-gauge nylon shell with a black 3/4 micro-foam
nitrile coating.
SKU
Description
Size
UOM
MSG6897
MSG6897XL
Black nylon shell with black ¾ micro-foam nitrile
Black nylon shell with black ¾ micro-foam nitrile
S-L
XL
DZ
DZ
Price
$28.31
$29.89
D
D. Glove Gray Nylon Shell With Black Nitrile Foam 3/4 Back
Black micro foam palm coat 15 gauge gray nylon liner. This glove features 3/4 coating offers
more protection, micro foam nitrile offers great grip, provides outstanding flexibility and comfort, high dexterity, coating draws oil and water aside to allow for enhanced grip, good abrasion
resistance and silicone free and antibacterial.
SKU
Description
Size
UOM
WCHE715SNK
Glove Gray Nylon, Coated Black Nitrile Foam 3/4 Palm Coated
L-XL
DZ
Price
$39.16
E
E. Glove Gray Nylon Shell With Black Nitrile Foam Palm
Black micro nitrile foam palm coat 15 gauge gray nylon liner. This glove features a palm coating that offers better breathability, provides outstanding flexibility and comfort, high dexterity,
coating draws oil and water aside to allow for enhanced grip, good abrasion resistance and
silicone free and antibacterial.
134
SKU
Description
Size
UOM
WCHE715SNP
Glove Gray Nylon, Coated Black Nitrile Foam Palm Coated
S-2X
DZ
Price
$37.68
A. HyFlex® 11-830 Light Duty Nitrile Coated Knit Glove
Improved ergonomic design with exceptional comfort, Ansell’s Patented Zonz™ Knit Advanced
Comfort Technology provides improved fit and comfort by releasing tension in the high stress
zones of the glove, decreasing worker hand fatigue. Enhanced Cuff Overedging (ECO) allows
for easier donning and doffing. Increased comfort and fit drive product acceptance and compliance and extensive size range protects more workers. The new metallic nitrile foam coating
has a distinctive modern look for fast identification, while the new foam coating compound
provides increased wear life. Provides sure grip in dry or light oil environments ANSI/ISEA 105
- Cut Level 1, EN 388 - Cut Level 1
Description
Size
UOM
HyFlex light duty nitrile
6-11
DZ
B
Price
$40.82
B. HyFlex® 11-920 Glove with Ansell Grip Technology™
In oily, slippery conditions, the HyFlex® 11-920 glove provides optimal control along with
durable protection. Our patent-pending Ansell Grip Technology™ coating channels fluid away
from the glove’s surface, enabling workers to effectively grip wet or moderately oily objects
with less force. The blue nitrile coating provides high abrasion resistance and prevents oil penetration, reducing the risk of dermatitis and liquid exposure. Ultimately, hand fatigue is reduced
for increased comfort and productivity. ANSI/ISEA 105 - Cut Level 1, EN 388 - Cut Level 1
SKU
Description
Size
UOM
ANS11-920
HyFlex blue nitrile
6-11
DZ
Price
$49.48
C
C. HyFlex® 11-801 Glove Black Foam Nitrile Glove
Offering the same outstanding light oil grip as HyFlex Foam 11-800, the new HyFlex Foam
11-801 provides exceptional comfort using Ansell’s patented Knitted Variable Stitch Design.
Its foam nitrile coating reduces hand fatigue and promotes maximum dexterity, while its gray
colored knit liner stays clean longer, making these gloves more industrial friendly. ANSI/ISEA
105 - Cut Level 1, EN 388 - Cut Level 1
SKU
Description
Size
UOM
ANS11-801
HyFlex foamed nitrile
6-11
DZ
D
Price
$51.40
D. HyFlex® 11-800 Gray Foam Nitrile Glove
Knit-lined, dipped, color-coded cuff HyFlex foam glove provides your workers with the highest
level of comfort and protection. The foam coating is resistant to snags and abrasions, and
it provides excellent grip in light oil applications by channelling the oil away from the glove
surface. Ideal for automotive assembly and small parts handling. ANSI/ISEA 105 - Cut Level
1, EN 388 - Cut Level 1
SKU
Description
Size
UOM
ANS11-800
HyFlex glove
6-11
DZ
Price
$51.40
E
E. HyFlex® 11-600 Lite Glove
Where dexterity is the key factor, light duty, coated, multi-purpose, palm coated , white polyurethane,
knitwrist, safety without sacrificing performance. ANSI/ISEA 105 - Cut Level 1, EN 388 - Cut Level 1
SKU
Description
Size
UOM
ANS11-600
HyFlex Lite fine
6-11
DZ
Price
$32.58
135
SKU
ANS11-830
A
A
A. Cor-Touch Lite™ White
15 gauge, seamless nylon glove with white color shell and white polyurethane palm coat.
SKU
Description
Size
UOM
MSG6895
MSG6895XL
MSG6895XXL
White nylon gloves with white polyurethane palms
XS-L
XL
2X
DZ
DZ
DZ
Price
$17.10
$18.06
$18.06
B
B. Cor-Touch Lite™ Gray
15 gauge, seamless nylon glove with gray color shell and gray polyurethane palm coat.
SKU
Description
Size
UOM
MSG6895G
MSG6895GXL
Gray nylon gloves with gray polyurethane palms
Gray nylon gloves with gray polyurethane palms
S-L
XL
DZ
DZ
Price
$18.76
$19.80
C
C. Standard Nylon Shell with Polyurethane Coating
13-gauge, seamless nylon glove with black color shell and gray polyurethane palm coat.
SKU
Description
Size
UOM
MSG6896C
MSG6896CXL
Black nylon gloves with black polyurethane palms
Black nylon gloves with black polyurethane palms
S-L
XL
DZ
DZ
D
D. Cor-Brite High Visibility String Polyurethane Coated Palms
The Cor-Brite is constructed of a 13-gauge, high visibility lime green polyester shell with a high
visibility orange polyurethane palm coating.
SKU
Description
Size
UOM
MSG6901
MSG6901XL
MSG69012X
String knit glove high-vis lime with high vis orange polyurethane palms
XS-L
XL
2X
DZ
DZ
DZ
136
Price
$15.37
$16.23
$16.23
Price
$11.90
$12.56
A
A. Standard Grain Cowhide Driver/Straight Thumb
Grain cow leather gloves are smooth, attractive, comfortable and durable. Offer better dexterity
and sense of touch. Gloves are unlined and feature straight thumb and shirred elastic back.
Description
Size
UOM
MSG8201
MSG8201XL
MSG8201XXL
Standard grain cowhide driver, unlined, straight thumb
S-L
XL
2XL
DZ
DZ
DZ
B
Price
$60.54
$62.29
$67.56
B. Standard Grain Cowhide Driver/Keystone Thumb
Grain cow leather gloves are smooth, attractive, comfortable and durable. Offer better dexterity
and sense of touch. Gloves are unlined and feature keystone thumb and shirred elastic back.
SKU
Description
Size
UOM
MSG8210
MSG8210XL
MSG82102X
MSG82103X
Standard grain cowhide driver, keystone thumb
XS - L
XL
2X
3X
DZ
DZ
DZ
DZ
Price
$62.29
$64.05
$73.48
$70.00
C
C. Select Grain Cowhide Driver/Wing Thumb
Made of select grain cow these gloves are unlined and have a seamless forefinger. They feature a wing thumb.
SKU
Description
Size
UOM
MSG1200
MSG1200XL
Select grain cowhide driver, unlined, wing thumb
Select grain cowhide driver, unlined, wing thumb
XS - L
XL
DZ
DZ
D
Price
$76.94
$82.50
D. Premium Grain Cowhide Driver/Keystone Thumb
This driver’s glove is made with premium grade leather on palm and back to provide excellent
dexterity and abrasion resistance. Used in construction, machine operation, utility work, farming, roping and many other general applications. Other features include shirred elastic back
and keystone thumb. Unlined.
SKU
Description
Size
UOM
MSG8235
MSG8235XL
Premium grain cowhide driver, unlined, keystone thumb
Premium grain cowhide driver, unlined, keystone thumb
S-L
XL
DZ
DZ
Price
$84.26
$88.89
E
E. Select Grain Cowhide Driver/Ball & Tape
The 8221 unlined driver’s gloves are made of grain cow leather. Features include a keystone
thumb and a ball and tape back. The 8225 driver’s glove is made of a select grain cowhide and
features a leather pull strap back and keystone thumb.
SKU
Description
Size
UOM
MSG8221
MSG8221XL
MSG8225
MSG8225XL
Select grain cowhide leather driver’s
Select grain cowhide leather driver’s
Select grain cowhide driver, leather pullstrap back
Select grain cowhide driver, leather pullstrap back
S-L
XL
S-L
XL
DZ
DZ
DZ
DZ
Price
$73.33
$76.94
$79.04
$87.09
MSG8225
137
Driver Gloves Hand Protection
SKU
A
A. Split Back, Grain Palm Cowhide Driver
Made with grain cowhide leather with a gray split leather back and features a slip on cuff with
a shirred elastic back. Keystone thumb. Unlined.
SKU
Description
Size
UOM
MSG8230
MSG8230XL
Split back, grain palm cowhide, keystone thumb
Split back, grain palm cowhide, keystone thumb
S-L
XL
DZ
DZ
Price
$55.83
$55.83
B
Hand Protection Driver Gloves
B. Split Cowhide Driver
These select split cow leather gloves are unlined and feature a keystone thumb and shirred
elastic back. Available in gray or russet colors.
SKU
Description
Size
UOM
MSG7800
MSG7800XL
MSG7805
MSG7805XL
Russet split cowhide driver, keystone thumb
Russet split cowhide driver, keystone thumb
Gray split cowhide driver, keystone thumb
Gray split cowhide driver, keystone thumb
S-L
XL
S-L
XL
DZ
DZ
DZ
DZ
C
Price
$34.81
$35.74
$32.04
$32.04
C. Grain Pigskin Driver
This driver’s glove is made with pigskin, a more porous leather for greater breath ability. Pigskin will retain its softness even after becoming wet. Available in a keystone thumb with shirred
elastic back. Available in premium grade and regular grade. Unlined.
SKU
Description
Size
UOM
MSG8800
MSG8800XL
MSG8810
MSG8810XL
MSG8820
MSG8820XL
Economy grain pigskin driver, straight thumb
Economy grain pigskin driver, straight thumb
Economy grain pigskin driver, keystone thumb
Economy grain pigskin driver, keystone thumb
Premium grain pigskin driver, keystone thumb
Premium grain pigskin driver, keystone thumb
S-L
XL
S-L
XL
S-L
XL
DZ
DZ
DZ
DZ
DZ
DZ
Price
$58.61
$58.61
$60.46
$60.46
$67.04
$70.76
D
D. Select Split Back/Grain Palm Pigskin Driver
This select grain pig palm/split pig back driver is unlined and has a shirred elastic back. Other
features are keystone thumb and a seamless forefinger.
SKU
Description
Size
UOM
MSG8825
MSG8825XL
Select split back/grain palm pigskin driver, keystone thumb
Select split back/grain palm pigskin driver, keystone thumb
S-L
XL
DZ
DZ
E
Price
$49.84
$52.61
E. Premium Grain Goatskin Driver’s Gloves
Grain goat leather gloves are unlined and feature keystone thumb and shirred elastic back.
Goatskin is preferred where tactile sensitivity is required. Goat provides excellent tensile
strength and abrasion resistance. The high lanolin content makes it one of the softest leathers
available.
138
SKU
Description
Size
UOM
MSG8500
MSG8500XL
MSG8500XXL
Premium grain goatskin driver’s gloves, Keystone thumb
S-L
XL
2XL
DZ
DZ
DZ
Price
$82.50
$86.11
$94.34
A
A. Premium Grain Pigskin Driver/Thinsulate® Lined
This driver’s glove is made with pigskin, a more porous leather for greater breath ability. They
Are Thinsulate® lined and features a keystone thumb and a shirred elastic back.
SKU
Description
Size
UOM
MSG8942
MSG8942XL
Premium grain pigskin, Thinsulate lined, keystone thumb
Premium grain pigskin, Thinsulate lined, keystone thumb
S-L
XL
DZ
DZ
Price
$98.98
$102.59
B. Premium Grain Pigskin Driver/Red Fleece Lined
Visibly more porous leather for greater breath ability. Returns to original softness after becoming wet from application or perspiration. All general purpose applications plus requirements
for wet or insulated (cold/hot) conditions. Features a keystone thumb and shirred elastic back.
SKU
Description
Size
UOM
MSG8922
MSG8922XL
MSG89222X
Premium grain pigskin driver, red fleece lined, keystone thumb
S-L
XL
2X
DZ
DZ
DZ
Price
$84.26
$88.92
$91.67
C
C. Split Cowhide Driver/Red Fleece Lined
These gloves are made from select split cow leather in a russet color with a red fleece lining.
Features a keystone thumb and shirred elastic back.
SKU
Description
Size
UOM
MSG7910
MSG7910XL
Split cowhide driver, red fleece lined, keystone thumb
Split cowhide driver, red fleece lined, keystone thumb
S-L
XL
DZ
DZ
Price
$48.06
$48.06
D
D. Premium Grain Cowhide Driver/White Fleece Lined
This driver’s glove keeps your hands warm while allowing outstanding dexterity. Features
include white fleece lining, shirred elastic back and keystone thumb.
SKU
Description
Size
UOM
MSG8245
MSG8245XL
MSG8245XXL
Premium grain cowhide, white fleece lined, keystone thumb
S-L
XL
2X
DZ
DZ
DZ
Price
$90.23
$98.91
$103.40
E
E. Premium Grain Cowhide Driver/Red Fleece Lined
This full leather driver’s glove is made with select leather for abrasion resistance red fleece
lined for warmth and comfort. Other features include shirred elastic back and keystone thumb.
SKU
Description
Size
UOM
MSG8240
MSG8240XL
MSG8240XXL
Premium grain cowhide, red fleece lined, keystone thumb
S-L
XL
2X
DZ
DZ
DZ
Price
$103.52
$107.22
$110.83
139
Insulated Drivers Hand Protection
B
A
A. Premium Grain Cowhide Leather Palm
Glove features fully wrapped premium leather index fingers and thumbs, leather fingertips,
leather knuckle straps, wing thumb design and shirred elastic back. Choose 2-1/2” safety cuff
or 4” gauntlet cuff.
SKU
Description
Size
UOM
MSG8300
MSG8300XL
MSG8310
MSG8310XL
Premium grain cow leather palm glove, 2 1/2” Rubberized Safety Cuff
Premium grain cow leather palm glove, 2 1/2” Rubberized Safety Cuff
Premium grain cow leather palm glove, 4” Rubberized Gauntlet Cuff
Premium grain cow leather palm glove, 4” Rubberized Gauntlet Cuff
S-L
XL
S-L
XL
DZ
DZ
DZ
DZ
Price
$75.09
$78.80
$77.87
$81.57
Hand Protection Leather Palms
B
B. Heavy Side Split Cowhide Leather Palm
Constructed of heavy side split leather and sewn with Kevlar thread for greater protection and
extended wear time. The glove features include a leather knuckle strap and a 2-1/2” rubberized
safety cuff.
SKU
Description
Size
UOM
MSG7500A
MSG7500AL
MSG7500AXL
Heavy side split leather palm gloves, 2 1/2” Rubberized safety cuff
Heavy side split leather palm gloves, 2 1/2” Rubberized safety cuff
S-L
XL
DZ
DZ
Price
$51.76
$53.61
C
C. Premium Shoulder Split Cowhide Leather Palm
These premium shoulder split cow leather work gloves feature a gunn cut pattern, knuckle
strap, and 2-1/2” rubberized safety cuff.
SKU
Description
Size
UOM
MSG7300RS
MSG7300RM
MSG7300RL
MSG7300RXL
MSG7300RXXL
Premium leather palm gloves, 2 1/2” rubberized safety cuff
S
M
L
XL
2XL
DZ
DZ
DZ
DZ
DZ
Price
$28.80
$28.80
$28.80
$30.65
$34.35
D
D. Side Split Cowhide Leather Palm
Kevlar sewn gloves made of side split cow leather. Features include a gunn cut pattern, a
knuckle strap and a 2-1/2” rubberized safety cuff.
SKU
Description
Size
UOM
MSG1030
MSG1030XL
Side split leather palm gloves, 2 1/2” rubberized safety cuff
Side split leather palm gloves, 2 1/2” rubberized safety cuff
S-L
XL
DZ
DZ
E
Price
$39.43
$40.80
E. Premium Shoulder, Split Cowhide Double Palm
Double leather palms provide extra protection and extends wear time. Constructed of premium
shoulder-split cow leather with 2-1/2” rubberized safety cuff and leather knuckle strap. Gunn
cut pattern.
140
SKU
Description
Size
UOM
MSG7351RA
Premium shoulder, split cowhide double palm, 2 1/2” rubberized safety cuff
L
DZ
Price
$42.13
A
A. Select Shoulder Cowhide Leather Palm
Leather gloves are best suited for heavy material handling and general work purpose. Select
shoulder cow leather glove designed with gunn cut pattern, knuckle strap and 2-1/2” rubberized safety cuff.
Description
Select shoulder leather palm, 2 1/2” rubberized safety cuff
Select shoulder leather palm, 2 1/2” rubberized safety cuff
Size
S
L
UOM
DZ
DZ
Price
$28.96
$28.33
B
B. Split Cowhide Double Palm
Leather gloves are best suited for heavy material handling and general work purpose. This
glove features a shoulder split cowhide leather double palm, striped canvas back, gunn cut
pattern, knuckle strap and 2-1/2” rubberized safety cuff.
SKU
MSG7261
MSG7264
MSG7261JP
MSG7261JPXL
MSG7262JP
Description
Select Shoulder Leather Palm, 2-1/2” Rubberized Safety Cuff
Select Shoulder Leather Palm, 4” Rubberized Gauntlet Cuff
Select Shoulder Leather Joint Palm, Rubberized Safety Cuff
Size
M-XL
L
L
XL
Ladies
UOM
DZ
DZ
DZ
DZ
DZ
Price
$31.26
$32.16
$25.85
$27.59
$25.85
C
C. Standard Split Cowhide Leather Palm
glove features a shoulder split cow leather palm, striped canvas back, gunn cut pattern with a
knuckle strap, and an option of cuff styles. Leather gloves are best suited for heavy material
handling and general work purpose. Application examples: construction, maintenance, warehousing, assembly, fabricating and general purpose.
SKU
MSG7200R
MSG7240
Description
Shoulder split cow leather palm, 2-1/2” Rubberized Safety Cuff
Shoulder split cow leather palm, 4” Rubberized Gauntlet Cuff
Size
S-XL
L
UOM
DZ
DZ
Price
$24.48
$27.41
D
D. Split Cowhide Leather Palm
glove features a shoulder split cowhide leather palm, gunn cut pattern with a knuckle strap.
SKU
MSG7205R
MSG7200S
MSG7202S
MSG7235
Description
Shoulder leather palm gloves, 2-1/2” Rubberized Safety Cuff
Shoulder leather palm gloves, 2 1/2” Starched Safety Cuff
Shoulder leather palm gloves, 2 1/2” Starched Safety Cuff
Shoulder leather palm gloves, 4” Safety Cuff
Size
L
L
Ladies
L
UOM
DZ
DZ
DZ
DZ
Price
$22.41
$21.73
$21.73
$28.06
141
Leather Palms Hand Protection
SKU
MSG7250RS
MSG7250R
A
A. Select Split Cowhide Leather Palm/Knit Wrist
Made of shoulder split cow leather. Knit wrist with knuckle strap. General purpose applications
requiring abrasion protection and breath ability. Applications include but not limited to: assembly, construction, fabricating, landscaping, maintenance, metal working, mining and sanitation.
SKU
MSG7140L
MSG7142A
Description
Shoulder split cow leather palm gloves, knit wrist
Shoulder split cow leather palm gloves, knit wrist
Size
L
Ladies
UOM
DZ
DZ
Price
$24.02
$24.02
Hand Protection Leather Palms
B
B. Split Cowhide Leather Patch Palm
Leather gloves are best suited for heavy material handling and general work purpose. Shoulder
split cow leather patch palm glove with striped canvas back, gunn cut pattern, and 2-1/2”
striped or denim safety cuff. Application examples: construction, maintenance, warehousing,
assembly, fabricating, and general purpose.
SKU
Description
Size
UOM
MSG7210
MSG7220
Split cow leather patch palm gloves, 2 1/2” Starched Safety Cuff
Split cow leather patch palm gloves, 2 1/2” Denim Safety Cuff
L
L
DZ
DZ
Price
$18.06
$18.06
C
C. Clute Cut Cowhide Leather Palms/Knit Wrist
Shoulder leather palm gloves with striped canvas backs. These gloves feature knit wrist and a
clute cut pattern.
SKU
Description
Size
UOM
MSG7120
MSG7122
Clute Cut leather palms, Knit Wrist
Clute Cut leather palms, Knit Wrist
L
Ladies
DZ
DZ
D
D. Premium Grain Goatskin
Premium grain goatskin leather palm, red canvas back, gunn pattern and 2.5-inch rubberized
safety cuff.
SKU
Description
Size
UOM
MSG8650L
Premium Grain Goatskin Leather Palm
L
DZ
142
Price
$67.10
Price
$17.41
$16.78
A
A. Split Cowhide Leather Palm/Foam & Fleece Lined
Leather gloves are best suited for heavy material handling and general work purpose. Foam
and fleece lined, split cow leather palm glove with striped canvas back, gunn cut pattern, and
2-1/2” rubberized safety cuff. Application examples: cold weather work environments, and wet
weather work environments.
Description
Size
UOM
Split leather palms, foam & fleece lined, 2 1/2” safety cuff
L
DZ
Price
$48.94
B
B. Split Cowhide Leather Palm/Thinsulate® Lined
Thinsulate lined leather palm glove with a gunn cut pattern and a 2-1/2” rubberized safety cuff.
SKU
Description
Size
UOM
MSG7270L
Split leather palms, Thinsulate lined, 2 1/2” safety cuff
L
DZ
Price
$66.85
C
C. Split Cowhide Leather Palm/Fleece Lined
Fleece lined leather palm glove with a gunn cut pattern and a 2-1/2” rubberized safety cuff.
SKU
Description
Size
UOM
MSG7265L
Split leather palms, fleece lined, 2 1/2” safety cuff
L
DZ
Price
$39.87
D
D. Split Cowhide Leather Palm/Thinsulate® & Waterproof Lining
This Waterproof Leather Palm is Thinsulate® Lined and has a blue side split leather palm. Other
features include yellow canvas back, gunn cut pattern and 2-1/2” rubberized safety cuff.
SKU
Description
Size
UOM
MSG7465
Waterproof, Thinsulate lined leather palms, 2 1/2” Safety Cuff
M-XL
DZ
Price
$69.56
143
Premium Leather Palms Hand Protection
SKU
MSG7260L
Hand Protection Welding
STICK
IRONCAT® STICK GLOVES PROVIDE EXCELLENT PROTECTION IN HIGH HEAT WELDING CONDITIONS. ALL GLOVES
FEATURE FULLY WELTED FINGERS TO PROTECT SEAMS FROM SPARKS AND ABRASION. 14” LENGTH PROTECTS
HANDS AND ARMS FROM SPARKS AND SPATTER.
A
A. Shoulder Split Cowhide
Shoulder split cowhide provides excellent protection in high heat welding conditions at an affordable price. 14” length protects hands and arms from sparks and spatter. Welted fingers to
protect seams from sparks, wing thumb for a natural fit and cotton lining keeps hands cool.
SKU
Description
Size
UOM
WCHE9010L
Welding Glove Shoulder Split Cowhide, Gray
L
DZ
Price
$64.92
B
B. Shoulder Split Cowhide
Shoulder split cowhide provides excellent protection in high heat welding conditions at an affordable price. 14” length protects hands and arms from sparks and spatter. Welted fingers to
protect seams from sparks, wing thumb for a natural fit and cotton lining keeps hands cool.
SKU
Description
Size
UOM
WCHE9011L
Welding Glove Shoulder Split Cowhide, Russet
L
DZ
C
Price
$67.99
C. Insulated Shoulder Split Cowhide - Ladies
Shoulder split cowhide provides excellent protection in high heat welding conditions at an affordable price. Long cuff protects hands and arms from sparks and spatter. Welted fingers and
Kevlar® thread protect seams from sparks, wing thumb for a natural fit and foam and cotton
lining for increased heat resistance.
144
SKU
Description
Size
UOM
WCHE9012L
Welding Gloves Insulated Shoulder Split Cowhide, Ladies
L
DZ
Price
$91.90
A
A. Select Shoulder Split Cowhide
Select shoulder split cowhide provides excellent protection in high heat welding conditions
at an affordable price. 14” length protects hands and arms from sparks and spatter. Welted
fingers and Kevlar® thread protect seams from sparks. Reinforced straight thumb for superior
grip and reduces abrasion. Cotton lining keeps hands cool.
Description
Size
UOM
WCHE9020L
Welding Gloves Select Shoulder Split Cowhide
L
DZ
B
Price
$92.64
B. Premium Side Split Cowhide
Premium side split cowhide provides the most durable protection in high heat welding conditions. 14” length protects hands and arms from sparks and spatter. Welted fingers and Kevlar®
thread protect seams from sparks, wing thumb for a natural fit and cotton lining keeps hands
cool.
SKU
Description
Size
UOM
WCHE9030L
Welding Gloves Premium Side Split Cowhide
L
DZ
Price
$106.29
C
C. Premium Side Split Cowhide - Double Reinforced Thumb
Premium side split cowhide provides the most durable protection in high heat welding conditions. 14” length protects hands and arms from sparks and spatter. Double reinforced thumb
combines thumb strap with an added patch on thumb saddle to protect high stress area. Double reinforced straight thumb provides superior grip and reduces abrasion. Welted fingers and
Kevlar® thread protect seams from sparks and cotton lining keeps hands cool.
SKU
Description
Size
UOM
WCHE9031L
Welding Gloves Premium Side Split Cowhide, Reinforced Thumb
L
DZ
D
Price
$113.95
D. Insulated Slightly Select Cowhide
Slightly select shoulder cowhide provides excellent protection in high heat welding conditions
at an affordable price. 14” length protects hands and arms from sparks and spatter. Additional
layer of foam on palm and back of hand provides added heat insulation. Reinforced wing
thumb provides a natural fit and welted fingers and Kevlar® thread protect seams from sparks.
SKU
Description
Size
UOM
WCHE9040L
Welding Gloves Insulated Slightly Select Cowhide, Yellow
L
DZ
Price
$82.84
E
E. Insulated Slightly Select Cowhide
Slightly select shoulder cowhide provides excellent protection in high heat welding conditions
at an affordable price. 14” length protects hands and arms from sparks and spatter. Additional
layer of foam on palm and back of hand provides added heat insulation. Reinforced wing
thumb provides a natural fit and reduces abrasion. Welted fingers and Kevlar® thread protect
seams from sparks.
SKU
Description
Size
UOM
WCHE9041L
Welding Gloves Insulated Slightly Select Cowhide, Blue
L
DZ
Price
$82.84
145
Welding Hand Protection
SKU
A
A. Insulated Premium Side Split Cowhide
Premium side split cowhide provides the most durable protection in high heat welding conditions. 14” length protects hands and arms from sparks and spatter. Additional layer of foam
on palm and back of hand provides added heat insulation Reinforced wing thumb provides a
natural fit and reduces abrasion. Welted fingers and Kevlar® thread protect seams from sparks.
SKU
Description
Size
UOM
WCHE9050L
Welding Gloves Insulated Premium Side Split Cowhide
L
DZ
Price
$110.54
B
B. Insulated Premium Side Split Cowhide - Dbl Reinforced Thumb
Premium side split cowhide provides the most durable protection in high heat welding conditions. 14” length protects hands and arms from sparks and spatter. Additional layer of foam
on palm and back of hand provides added heat insulation. Double reinforced thumb combines
thumb strap with an added patch on thumb saddle to protect high stress area. Double reinforced wing thumb provides a natural fit and reduces abrasion. Welted fingers and Kevlar®
thread protect seams from sparks.
SKU
Description
Size
UOM
WCHE9051
Welding Gloves Insulated Premium Side Split Cowhide, Reinf Thumb
M-XL
DZ
C
Price
$113.27
C. Top Grain Elk
Top grain elk provides the best fit and feel in high heat welding conditions. 14” length protects
hands and arms from sparks and spatter. Additional layer of foam on back of hand provides
added heat insulation. Reinforced straight thumb provides superior grip. Welted fingers and
Kevlar® thread protect seams from sparks.
SKU
Description
Size
UOM
WCHE9060
Welding Gloves Top Grain Elk
S-XL
PR
D
D. Top Grain Elk
Top grain elk provides the best fit and feel in high heat welding conditions. 14” length protects
hands and arms from sparks and spatter. Additional layer of foam on palm and back of hand
provides added heat insulation. Reinforced straight thumb provides superior grip. Welted fingers and Kevlar® thread protect seams from sparks.
SKU
Description
Size
UOM
WCHE9061
Welding Gloves Top Grain Elk
S-XL
PR
146
Price
$18.89
Price
$19.99
MIG/TIG
IRONCAT® MIG & TIG GLOVES S TRIKE THE RIGHT BAL ANCE BETWEEN PROTECTION AND DEXTERITY. SOFT, PLIABLE
LEATHERS ALLOW FOR FREER MOVEMENT WHILE INSULATING FROM HEAT.
A
A. Heavyweight Top Grain Cowhide - MIG
Heavyweight grain cowhide glove provides a sturdy glove for all-around MIG welding. Unlined
for additional dexterity. 4” cuff protects hands and lower arms from burns. Kevlar® thread
protects seams from sparks. Wing thumb and seamless forefinger for increased dexterity.
Description
Size
UOM
WCHE6010
Welding Gloves Heavyweight Top Grain Cowhide, MIG
S-XL
DZ
Price
$121.07
B
B. Insulated Top Grain Pigskin - MIG
Grain pigskin glove provides a pliable and sturdy glove for MIG welding. Additional foam lining
on back of hand protects against heat while reinforced straight thumb minimizes abrasion. 4”
cuff protects hands and lower arms from burns. Kevlar® thread protects seams from sparks.
Pigskin is ideal for wet and oily conditions.
SKU
Description
Size
UOM
WCHE6020
Welding Gloves Insulated Top Grain Pigskin, MIG
M-L
PR
Price
$13.44
C
C. Insulated Top Grain Pigskin - MIG
Grain pigskin glove provides a pliable and sturdy glove for MIG welding. Unlined for additional
dexterity. 4” cuff protects hands and lower arms from burns. Kevlar® thread protects seams
from sparks. The straight thumb provides superior grip. Pigskin ideal for wet and oily conditions.
SKU
Description
Size
UOM
WCHE6021
Welding Gloves Insulated Top Grain Pigskin, MIG
S-XL
PR
Price
$12.20
D
D. Insulated Top Grain Deerskin - MIG
Deerrskin glove provides the softest and most comfortable glove for MIG welding. Additional
foam lining on back of hand protects against heat while reinforced straight thumb minimizes
abrasion. 4” cuff protects hands and lower arms from burns. Kevlar® thread protects seams
from sparks.
SKU
Description
Size
UOM
WCHE6030
Welding Gloves Insulated Top Grain Deerskin, MIG
M-L
PR
Price
$15.10
147
SKU
A
A. Heavy Duty MIG/Stick
Grain cowhide leather welder glove with split pigskin gauntlet cuff. MIG welder gloves are less
bulky and allow better dexterity while still having a high level of protection. It is sewn with
Kevlar® thread which is heat resistant and extremely strong.
SKU
Description
Size
UOM
WCHE9100
Weilding Gloves Heavy Duty MIG/Stick
M-XL
DZ
Price
$236.85
B
B. Premium Grain Goatskin TIG
Goatskin provides great fit and dexterity necessary for TIG welding at an affordable price. Soft
leather and seamless index finger allows wire to pass freely over glove. 4” cuff protects hands
and lower arms from burns. Kevlar® thread protects seams from sparks. Wing thumb provides
a natural fit.
SKU
Description
Size
UOM
WCHE6142
Welding Gloves Premium Grain Goatskin TIG
M-XL
DZ
Price
$115.80
C
C. Premium Top Grain Kidskin TIG
Premium top grain kidskin provides the best fit and dexterity necessary for TIG welding. Soft
leather allows wire to pass freely over glove. 2” cuff protects hands and wrists from burns
while allowing freedom of movement. Kevlar® thread protects seams from sparks. Straight
thumb provides superior grip.
SKU
Description
Size
UOM
WCHE6140
Welding Gloves Premium Top Grain Kidskin 2” Cuff TIG
S-XL
PR
Price
$11.77
D
D. Premium Top Grain Kidskin TIG
Premium top grain kidskin provides the best fit and dexterity necessary for TIG welding. Soft
leather allows wire to pass freely over glove. 4” cuff protects hands and lower arms from
burns. Kevlar® thread protect seams from sparks. Straight thumb provides superior grip.
SKU
Description
Size
UOM
WCHE6141
Welding Gloves Premium Top Grain Kidskin 4” Cuff TIG
S-XL
PR
Price
$12.98
E
E. Deerskin Split Leather TIG
Split deerskin combines a soft feeling with a snug fit ideal for TIG welding. Soft leather allows
wire to pass freely over glove. 4” cuff protects hands and lower arms from burns. Kevlar®
thread protects seams from sparks. Straight thumb provides superior grip.
148
SKU
Description
Size
UOM
Price
WCHE6130
Welding Gloves Deerskin Split Leather TIG
S-XL
PR
$9.65
A
A. Split Cow Welders
Split cow leather welding gloves feature full sock lining, one-piece back and gray color. Choose
between men’s or ladies.
Description
Size
UOM
MSG7602
MSG7605
Split cow welders, ladies
Split cow welders
L
XL
DZ
DZ
Price
$45.37
$45.37
B
B. Black Shoulder Leather Welders
These shoulder Leather welder’s gloves are a black color with reinforced palms. Features
include Kevlar® sewn and full sock lining.
SKU
Description
Size
UOM
MSG7625
Shoulder leather welder’s gloves, black
XL
DZ
Price
$69.85
C
C. Standard Grain Cow MIG/TIG Welder’s Gloves
MIG/TIG welder’s gloves feature standard grain cowhide leather and 4” split leather gauntlet
cuff for wrist and forearm protection.
SKU
Description
Size
UOM
MSG8135
MSG8135XL
Standard grain leather MIG/TIG welder’s glove
Standard grain leather MIG/TIG welder’s glove
S-L
XL
DZ
DZ
Price
$82.51
$89.83
D
D. Premium Grain Cow MIG/TIG Welder’s Gloves
Top of the line welder’s gloves feature premium grade cowhide leather sewn with Kevlar®
thread for improved durability. 4” split leather gauntlet cuff protects wrist and forearm.
SKU
Description
Size
UOM
MSG8130
MSG81302XL
Premium grain leather MIG/TIG welding glove
Premium grain leather MIG/TIG welding glove
S-XL
2X
DZ
DZ
Price
$93.42
$103.41
149
SKU
A
A. Standard Grain Cowhide With Hi-Vis Finger Tips
Standard grain cowhide drivers, unlined, shirred elastic back, keystone thumb and hi-vi orange
fingertips.
SKU
Description
Size
UOM
MSG8211HV
MSG8211HVXL
MSG8211HV2X
MSG8211HV3X
Standard Grain Cowhide With Hi-Vis Finger Tips
S-L
XL
2X
3X
DZ
DZ
DZ
DZ
Price
$73.04
$80.76
$84.34
$88.00
B
Hand Protection High-Vis
B. Hi Vis Select Shoulder Split Cow Leather Palm Gloves
Made with a select shoulder split cow leather palm and a hi vis orange back. Features reflective
tape on the back and a rubberized safety cuff.
SKU
Description
Size
UOM
MSGF7250R
Hi vis select shoulder split cow gloves, rubberized safety cuff
L
DZ
Price
$41.70
C
C. Thinsulate® Lined, Hi Vis Grain Pigskin Leather Palm
Made with a premium grain pig leather palm and Thinsulate lined. Featuring a hi vis orange
back, lime green 1-1/2” reflective tape and a 2-1/2” safety cuff.
SKU
Description
Size
UOM
MSGF8750L
MSGF8750XL
Hi Vis Grain Pigskin Leather Palm, Thinsulate lined, 2 1/2” Safety Cuff
Hi Vis Grain Pigskin Leather Palm, Thinsulate lined, 2 1/2” Safety Cuff
L
XL
DZ
DZ
Price
$104.44
$107.08
D
D. Thinsulate® Lined, Hi Vis Grain Pigskin Leather Palm W/ Knit Wrist
Made with a premium grain pig leather palm and Thinsulate lined. Features a hi vis orange
back, 1-1/2” lime green reflective tape and a knit wrist.
SKU
Description
Size
UOM
MSGF8760L
MSGF8760XL
Hi Vis Grain Pigskin Leather Palm, Thinsulate lined, Knit Wrist
Hi Vis Grain Pigskin Leather Palm, Thinsulate lined, Knit Wrist
L
XL
DZ
DZ
E
Price
$102.59
$105.24
E. Select Grain Hi-Vis Cowhide Driver Gloves With Logo
Select grain cowhide leather driver glove. Extra protection by keeping safety in mind with Hi-Vis
orange at the fingertips and a Hi- Vis reminder to “WATCH YOUR HANDS”. Keystone thumb
is durable and allows for the best flexibility. Shirred elastic wrist and welted seams on middle
fingers.
150
SKU
Description
Size
UOM
WCHE990KOT
WCHE990KOT2X
WCHE990KOT3X
Select Grain Cowhide Driver Gloves, Keystone Thumb, Hi-Vis
XS-XL
2X
3X
DZ
DZ
DZ
Price
$73.76
$86.39
$94.18
A
A. Hi Vis Cotton Canvas Gloves with PVC Dots
Hi-vis canvas gloves with black PVC dots. Features a knit wrist.
Description
Color
UOM
MSG2710
MSG2715
MSG2720
Hi vis canvas gloves with black PVC dots
Orange
Lime Green
Yellow
DZ
DZ
DZ
Price
$12.55
$12.55
$12.55
B
B. Hi-Vis, Corded, Poly-Cotton Double Palm
Hi-vis, double palm canvas gloves. Made from a poly/cotton blended, corded fabric. Features
a knit wrist.
SKU
Description
Color
UOM
MSG2800CD
MSG2810CD
MSG2820CD
Poly/Cotton, Corded Canvas Double Palm, Knit Wrist
Orange
Lime green
Yellow
DZ
DZ
DZ
Price
$18.98
$18.98
$18.39
C
C. Hi Vis Corded Cotton Canvas Double Palm Gloves
Made of 100% cotton, corded canvas. Features double palms and knit wrist. Heavy-weight.
SKU
Description
Color
UOM
MSG2830CD
MSG2840CD
MSG2850CD
100% cotton, hi-vis corded double palm gloves, knit wrist
Yellow
Orange
Lime green
DZ
DZ
DZ
Price
$20.82
$20.82
$20.82
D
D. Hi Vis Cotton Canvas Double Palm Gloves
Hi Vis double palm made of 100% cotton canvas featuring a knit wrist.
SKU
Description
Color
UOM
MSG2860C
MSG2865BD
MSG2870C
MSG2875BD
Hi-vis double palm cotton gloves
Hi-vis double palm cotton gloves, with black PVC dots
Hi-vis double palm cotton gloves
Hi-vis double palm cotton gloves, with black PVC dots
Orange
Orange
Lime Green
Lime Green
DZ
DZ
DZ
DZ
Price
$20.35
$22.19
$20.35
$22.19
151
High-Vis Hand Protection
SKU
A
A. PVC Dotted Cotton Canvas Gloves
PVC dotted, cotton canvas gloves feature clute cut and straight thumb. Knit wrist promotes
warmth, fit, and helps prevent common particles from entering the glove.
SKU
Description
Size
UOM
MSG2602
MSG2608
MSG2610
MSG2612
8 oz, PVC Dotted, Canvas Gloves, Clute Cut, Knit Wrist
Ladies
L
L
Ladies
DZ
DZ
DZ
DZ
Price
$8.89
$9.07
$10.72
$13.20
Hand Protection Canvas
B
B. Clute Cut, Cotton Canvas Gloves
Premium cotton canvas with clute cut and a knit wrist.
SKU
Description
Size
UOM
MSG2000
MSG2000V
MSG2002
MSG2100
MSG2100CD
MSG2200
8oz, Clute Cut Cotton Canvas Gloves, Knit Wrist
Standard Weight, Clute Cut Cotton Canvas Gloves, Knit Wrist
Standard Weight, Clute Cut Cotton Canvas Gloves, Knit Wrist
10 oz, Clute Cut, Cotton Canvas Gloves, Knit Wrist
10oz, Clute Cut, Corded Canvas Gloves, Knit Wrist
12 oz, Clute Cut, Cotton Canvas Gloves, Knit Wrist
L
L
Ladies
L
L
L
DZ
DZ
DZ
DZ
DZ
DZ
Price
$8.61
$7.15
$7.06
$9.08
$13.57
$10.45
C
C. Cotton Canvas Gloves with Hi Vis PVC Dots
Cotton canvas gloves with high vis orange PVC dots. Features a clute cut, a straight thumb
and knit wrist.
SKU
Description
Size
UOM
MSG2640K
MSG2650
MSG2670
12 oz, Cotton Canvas Gloves, Kevlar Sewn, Knit Wrist, Hi Vis PVC Dots
12 oz Cotton Canvas Gloves, Knit Wrist, Hi Vis PVC Dots
10 oz Cotton Canvas Gloves, Knit Wrist, Hi Vis PVC Dots
L
L
L
DZ
DZ
DZ
D
D. Cotton Canvas Double Palm Gloves
Cotton canvas gloves are primarily used for comfort and breath ability in general purpose
applications. Glove features canvas double palm/nap in or nap out and clute cut. Knit wrist
promotes warmth, fit, and helps prevent common particles from entering the glove.
SKU
Description
Size
UOM
MSG24101
MSG2430
Cotton canvas gloves w/double palm/nap out/red knit wrist
Cotton canvas gloves w/double palm/nap out/knit wrist
L
L
DZ
DZ
Price
$16.48
$15.22
MSG24101
152
Price
$16.78
$10.72
$10.53
A
A. Natural Color 2-Piece Jersey Gloves
This general purpose glove is available in natural (cotton) color, constructed of a soft, jersey
material. The durable two-piece construction glove, is reversible with knit wrists. Available in
mens and ladies sizes.
SKU
Description
Size
UOM
Price
MSG1300C
MSG1302C
Natural color, 2-piece jersey gloves, knit wrist
Natural color, 2-piece jersey gloves, knit wrist
L
Ladies
DZ
DZ
$7.15
$6.97
B. Brown Jersey Gloves
This standard weight glove is clute cut and constructed of a soft, jersey material. It provides
optimum dexterity without compromising comfort and protection. The brown jersey glove features knit wrists and is available in men’s and ladies sizes.
SKU
Description
Size
UOM
Price
MSG1400P
MSG1402
MSG1410C
MSG1430
Standard weight, brown color jersey gloves, clute cut, knit wrist
Standard weight, brown color jersey gloves, clute cut, knit wrist
100% cotton, brown color jersey gloves, clute cut, knit wrist
Extra Heavy weight, brown color jersey gloves, clute cut, knit wrist
L
Ladies
L
L
DZ
DZ
DZ
DZ
$6.48
$6.34
$8.17
$9.91
C
C. PVC Dotted Brown Jersey Gloves
High quality, jersey gloves feature PVC dotted palms for added protection and increased gripping. This soft brown glove is clute cut with knit wrists.
SKU
Description
Size
UOM
MSG1500
MSG1502
MSG1510
MSG1512
PVC Dotted brown jersey gloves, clute cut, knit wrist
PVC Dotted brown jersey gloves, clute cut, knit wrist
Micro PVC dotted brown jersey gloves, clute cut, knit wrist
Micro PVC dotted brown jersey gloves, clute cut, knit wrist
L
Ladies
L
Ladies
DZ
DZ
DZ
DZ
Price
$9.91
$9.72
$10.35
$10.17
MSG1500
D
D. Heavy Weight Light Blue Jersey Gloves
Heavy weight light blue jersey, knit wrist glove that is clute cut.
SKU
Description
Size
UOM
MSG1450
MSG14503
Heavy weight light blue jersey
Heavy weight light blue jersey
L
Ladies
DZ
DZ
Price
$12.65
$12.89
E
E. Red Fleece Lined Brown Jersey Gloves
Brown jersey gloves made of 8 oz. jersey material with knit wrist. Gunn cut with red fleece liner
and straight thumb.
SKU
Description
Size
UOM
MSG1600
Red Fleece lined, brown jersey gloves, slip-on cuff
L
DZ
Price
$14.02
153
Jerseys Hand Protection
B
A
A. Gray Poly/Cotton String Knit Gloves
Uncoated string knit gloves feature 60% cotton/40% polyester fiber content. Used in general
maintenance and other dry jobs. Glove is reversible.
SKU
Description
Size
UOM
Price
MSG3415G
MSG3185GS
MSG3185GL
Standard weight, gray color, string knit gloves
Heavy weight, gray color, string knit gloves
Heavy weight, gray color, string knit gloves
S-L
S
L
DZ
DZ
DZ
$3.70
$5.50
$5.50
B
B. Multi-Purpose String Knit Gloves
Hand Protection String Knit
Multi-Purpose string knit gloves, natural color in standard, economy or medium weight. These
gloves come in either a cotton/poly blend or you can get them made of 100% cotton. Provides
comfort and warmth and allows manual dexterity.
SKU
Description
Size
UOM
Price
MSG3400
MSG3400XL
MSG3410
MSG3411S
MSG3411L
MSG3435
Medium weight, natural color, poly/cotton string knit gloves
Medium weight, natural color, poly/cotton string knit gloves
Standard weight, natural color, poly/cotton string knit gloves
Economy weight, natural color, poly/cotton string knit gloves
Economy weight, natural color, poly/cotton string knit gloves
Medium weight, natural color, 100% cotton string knit gloves
S-L
XL
S-L
S
L
S-L
DZ
DZ
DZ
DZ
DZ
DZ
$5.17
$5.17
$4.30
$3.70
$3.70
$5.08
C
C. String Knit Gloves with PVC Dots on 2 Sides
7 Gauge, string knit gloves feature 60% cotton/40% polyester fiber content and are PVC dotted
on 2 sides. Ideal for general maintenance and other dry jobs.
SKU
Description
Size
UOM
MSG3851L
MSG3855XL
MSG3855S
Economy weight string knit gloves, PVC Dots on 2 sides
Medium weight string knit gloves, PVC Dots on 2 sides
Medium weight string knit gloves, PVC Dots on 2 sides
L
XL
S
DZ
DZ
DZ
Price
$6.96
$10.19
$9.73
D
D. String Knit Gloves with PVC Dots on 1 Side
PVC dotted on one side, string knit gloves. Made from a cotton/polyester blend. Perfect for
when a good grip is a must.
SKU
Description
Size
UOM
Price
MSG3801S
MSG3801L
MSG3805S
MSG3805L
Economy weight, natural color, poly/cotton string knit gloves, PVC Dots,1 side
Economy weight, natural color, poly/cotton string knit gloves, PVC Dots,1 side
Standard weight, natural color, poly/cotton string knit gloves, PVC Dots, 1 side
Standard weight, natural color, poly/cotton string knit gloves, PVC Dots, 1 side
S
L
S
L
DZ
DZ
DZ
DZ
$5.78
$5.78
$8.61
$8.61
E
E. Thermal Liner Gloves
Insulating Liner Glove. Unique glove is manufactured with special fibers to trap warm air near
the skin while wicking moisture away. It can be used as a liner or on it’s own. Machine washable and shrink-resistant.
154
SKU
Description
UOM
MSGFBC3730
MSGFBC3830
MSGH3677
White Thermostat® Liner
Blue Thermostat® Liner
Black Thermal Liner, Acrylic/Spandex
DZ
DZ
DZ
Price
$27.76
$31.53
$15.22
A
A. Premium High Dexterity Nitrile Dipped Gloves
Gloves feature a premium nitrile coating for abrasion and puncture resistance. The lightweight interlock liner enhances dexterity and tactile sensitivity. Actifresh treated.
SKU
Description
Size
UOM
MSG6980
MSG6980XL
Premium nitrile palm coated gloves, smooth finish, knit wrist, interlock shell
Premium nitrile palm coated gloves, smooth finish, knit wrist, interlock shell
S-L
XL
DZ
DZ
Price
$26.04
$26.04
B
Gloves are jersey lined and fully coated with premium nitrile rubber. Knit wrist keeps debris
and foreign material out of glove. Actifresh® treated.
SKU
Description
Size
UOM
MSG6951
MSG6951R
Premium nitrile palm coated gloves, smooth finish, jersey lined, knit wrist
Premium nitrile palm coated gloves, rough finish, jersey lined, knit wrist
L
L
DZ
DZ
Price
$32.62
$40.80
C
C. Premium Nitrile Dipped Gloves, Fully Coated
Premium nitrile fully coated gloves with smooth finish. These gloves have an interlock shell,
knit wrist and are ActiFresh® treated.
SKU
Description
Size
UOM
MSG6981
MSG6981XL
Premium Nitrile fully coated gloves, smooth finish, interlock lined, knit wrist
Premium Nitrile fully coated gloves, smooth finish, interlock lined, knit wrist
S-L
XL
DZ
DZ
Price
$26.05
$27.50
D
D. Premium Nitrile Palm Coated Gloves
Gloves are jersey lined and palm coated with premium nitrile rubber. 2-1/2” safety cuff
protects wrist. This synthetic rubber resists a wide range of solvents and hazardous chemicals, while providing better resistance to cuts and abrasions than neoprene or PVC gloves.
Actifresh® treated. Available with smooth or rough finished palms.
SKU
Description
Size
UOM
MSG6960
MSG6960R
Premium nitrile palm coated gloves, smooth finish, safety cuff
Premium nitrile palm coated gloves, rough finish, jersey lined, safety cuff
L
L
DZ
DZ
Price
$33.20
$41.71
E
E. Premium Nitrile Fully Coated Gloves
Premium nitrile fully coated glove with smooth finish. This glove has a jersey shell, 2-1/2”
safety cuff and is ActiFresh® treated.
SKU
Description
Size
UOM
MSG6961L
MSG6961RL
MSG6961RL
Premium nitrile fully coated gloves, smooth finish, jersey lined, safety cuff
Premium nitrile fully coated gloves, rough finish, jersey lined, safety cuff
L
L
DZ
DZ
Price
$37.13
$43.54
155
Supported Hand Protection
B. Premium Nitrile Dipped Gloves, Jersey Lined
A
A. Hylite®
Hylite combines the comfort of a cotton lining and the exceptional snag, puncture, abrasion,
and cut resistance of a nitrile coating in a medium-duty glove. The glove is a better alternative
to cotton, light- to medium-duty leather, and PVC. For extra comfort, Hylite features an interlock knit lining, generous sizing, and a contoured design. Hylite gloves outwear cotton up to 12
to 1, light leather 5 to 1, and PVC-coated gloves 3 to 1.
SKU
Description
Coating
Style
Size
UOM
ANS47-400
ANS47-400XLG
ANS47402
Hylite gloves
Hylite gloves
Hylite gloves
Palm
Palm
Fully
Knit wrist
Knit wrist
Knit wrist
S-L
XL
S-XL
DZ
DZ
DZ
Price
$46.60
$46.60
$47.63
Hand Protection Supported
B
B. Neox®
The neoprene coating on Neox gloves provides better all-around resistance to cuts, abrasions,
and chemicals than most other glove coatings, while the interlock knit cotton lining enhances
puncture and snag resistance. Curved fingers with a wing thumb provide a natural fit and
greater comfort, and the two-piece lining eliminates irritating seams.
SKU
ANS9924
ANS9928-10
Description
Neox gloves
Neox gloves
Length
14”
18”
Style
Gauntlet
Gauntlet
Size
10
10
UOM
DZ
PR
Price
$147.60
$15.64
C
C. Rubber Coated Gloves
Made with FDA accepted materials for use in food processing applications. Rough textured
natural rubber coating for greater gripping power and a higher degree of cut resistance.
SKU
Description
Size
UOM
MSG5615
Rubber coated gloves
L
DZ
D
D. Premium Rubber Coated Gloves
This rough textured, natural rubber coated glove offers greater gripping power and a higher
degree of cut resistance. Also features a crinkle finish.
SKU
Description
Size
UOM
MSG5605
Premium rubber coated gloves
L
DZ
156
Price
$37.59
Price
$27.22
A
A. Vinyl Impregnated Slip-on Glove
This vinyl impregnated glove stretches to slip over the hand. Russet in color.
Description
Size
UOM
MSG6000
MSG6000XL
Vinyl impregnated slip-on glove
Vinyl impregnated slip-on glove
M-L
XL
DZ
DZ
Price
$12.65
$12.65
B
B. Vinyl Coated Gloves
Dipped in vinyl. Seamless knit liner. Porous textured coating allows for breathability and easy
gripping, while minimizing the absorption of water, oil and grease. Actifresh® treated to help
retard odors and eliminate germs by controlling bacterial build-up.
SKU
Description
Size
UOM
MSG6500
MSG6500XL
Vinyl coated gloves
Vinyl coated gloves
XS-L
XL
DZ
DZ
Price
$38.05
$38.05
C
C. Neoprene Over Latex Gloves
The neoprene over latex glove features a premium neoprene palm and back with a latex cuff.
Features include a 30 mil thickness, flock lining and a 13” length.
SKU
Description
Size
UOM
MSG4307
MSG4308
MSG4309
MSG4300
30mil Neoprene over latex unsupported gloves, flock lined
7
8
9
10
DZ
DZ
DZ
DZ
Price
$24.20
$24.20
$24.20
$24.20
D. Chemi-Pro®
D
A unique dipping process which combines neoprene over natural rubber latex provides increased protection against a wide range of chemicals. The gloves are 27 mil thick for extra
ruggedness and durability, and the 13” length is longer than most standard gloves for added
forearm protection. A recessed diamond-embossed pattern provides added grip on wet or
dry surfaces, while a cotton flock lining absorbs perspiration and increases worker comfort.
Chemi- Pro gloves are an economical, cost-saving substitute for higher-priced, heavy gauge
nitrile and neoprene gloves.
SKU
Description
Size
UOM
ANS224-7
ANS224-8
ANS224-9
ANS224-10
Chemi-Pro 27mil unsupported gloves, flock lined
7
8
9
10
DZ
DZ
DZ
DZ
Price
$28.20
$28.20
$28.20
$28.20
157
Unsupported Hand Protection
SKU
A
A. Premium Nitrile Unsupported Gloves
Premium nitrile unsupported gloves 13” in length, 11 mil thick and unlined.
SKU
Description
Size
UOM
MSG4408
MSG4409
MSG4410
MSG4411
Premium 11 mil nitrile unsupported gloves, unlined
8
9
10
11
DZ
DZ
DZ
DZ
Price
$17.24
$17.24
$17.24
$17.24
B
Hand Protection Unsupported
B. Double Dipped Neoprene Gloves
100% Neoprene coated, double dipped gloves feature a sandpaper grip, interlock lining and
gauntlet cuff. Double dipped gloves provide better abrasion and chemical resistance. The interlock lightweight lining provides a “cool” wear. Green color. 12” and 14” long.
SKU
Description
Length
Size
UOM
MSG6872
MSG6872XL
MSG6874L
MSG6874XL
Double dipped neoprene gloves, interlock lined
12”
12”
14”
14”
S-L
XL
L
XL
DZ
DZ
DZ
DZ
Price
$76.17
$76.17
$88.93
$88.93
C
C. Scorpio®
Neoprene coated Scorpio gloves offer broad spectrum resistance to a wide range of chemicals, including oils, acids, solvents and caustics. The interlock knit cotton lining and flexible
neoprene coating stretch to provide a snug fit, and allows for easy on and off, while the twopiece lining eliminates seams, which can cause hand irritation and premature wear-through. A
dipped rough finish makes handling wet, slippery materials easier and safer.
SKU
Description
Length
Size
UOM
ANS8352ANS8354
ANS8352
ANS8354
Scorpio gloves
Scorpio gloves
12”
14”
7-10
8-10
DZ
DZ
D. AlphaTEC™
When you work with hazardous chemicals or dangerous liquids, you can’t afford any kind of
slip. That’s why the AlphaTEC glove features the revolutionary Ansell Grip Technology™. Our
patent- pending nitrile layer is filled with microscopic channels that actively repel oils and other
lubricants, giving you nearly the same grip you would have in fluid-free conditions. Combined
with an advanced ergonomic design, the AlphaTEC glove greatly increases control and comfort, significantly reducing fatigue and CTS-related injuries.
SKU
Description
Size
UOM
ANS58-535M
ANS58-535LG
AlphaTEC
AlphaTEC
M
L
DZ
DZ
158
D
Price
$87.84
$87.84
Price
$63.85
$76.08
A. Sol-Vex®
Sol-Vex gloves are made of a high-performance nitrile compound which provides an outstanding combination of strength and chemical resistance. When exposed to aromatic and petroleum solvents, as well as caustics and animal fats, Sol-Vex gloves have proven to be a superior
choice over rubber or neoprene. Sol-Vex gloves won’t swell, weaken or degrade, and they offer
better protection against snags, punctures, abrasions and cuts. And, as added benefits, SolVex gloves do not promote contact dermatitis, and their component materials comply with FDA
regulations for food contact.
Description
Thickness
Length
Size
UOM
ANS37155ANS37155
ANS37175-6
ANS37175-7
ANS37175-8
ANS37175-9
ANS37175-10
ANS37175-11
ANS37185-7
ANS37185-8
ANS37185-9
ANS37185-10
ANS37185-11
Sol-Vex embossed gloves
Sol-Vex embossed, flock-lined gloves
15 mil
15 mil
15 mil
15 mil
15 mil
15 mil
15 mil
22 mil
22 mil
22 mil
22 mil
22 mil
13”
13”
13”
13”
13”
13”
13”
18”
18”
18”
18”
18”
7-11
6
7
8
9
10
11
7
8
9
10
11
DZ
DZ
DZ
DZ
DZ
DZ
DZ
DZ
DZ
DZ
DZ
DZ
Price
$26.18
$25.00
$25.00
$25.00
$25.00
$25.00
$25.00
$120.00
$120.00
$120.00
$120.00
$120.00
B
B. 17” PVA Gloves
Hall’s Solvaseal coated gloves have all the features that provide comfort--curved fingers, wing
thumb construction and just the right weight. Developed particularly for use in Ketones, Acetones and petroleum base degreasing solvents such as Varsol and Mid-Solv.
SKU
Description
UOM
HAL88
17” PVA gloves
DZ
Price
$240.00
C
C. Premium, Double Dipped, 12” Rubber Coated Gloves
Gloves have excellent abrasion, cut and puncture resistance as well as good gripping capabilities. Features include safety cuff and interlock liner.
SKU
Description
Size
UOM
MSG5680S
MSG5680L
Premium, double dipped, 12” rubber coated gloves
Premium, double dipped, 12” rubber coated gloves
S
L
DZ
DZ
Price
$52.63
$52.63
159
SKU
A
A
A. PVC Double Dipped Gloves
Made of double dipped 100% Poly Vinyl Chloride (PVC). Features sandpaper finish and interlock lined construction.
SKU
Description
Length
Size
UOM
MSG5112SI
MSG5114SI
PVC double dipped gloves
PVC double dipped gloves
12”
14”
L
L
DZ
DZ
Price
$25.39
$28.06
B
Hand Protection Unsupported
B. PVC Double Dipped Non-Slip Gloves
Blend of PVC compound and high quality plasticizers for maximum benefit in specific industrial
applications. Maximum resistance to mild chemicals, oils and solvents, and strong acids. Double-dipped sandy finish. Flexible, non-slip grip in wet or dry applications. Actifresh® treated.
Launderable. Jersey lining. Gauntlet Cuffs.
SKU
Description
Length
Size
UOM
MSG5112SJ
MSG5114SJ
PVC double dipped non-slip gloves
PVC double dipped non-slip gloves
12”
14”
L
L
DZ
DZ
Price
$27.22
$30.79
C
C. Double Dipped PVC Gloves with Etched Finish
Made of double dipped 100% Poly Vinyl Chloride (PVC). Features etched finish and interlock
lined construction.
SKU
Description
Length
Size
UOM
MSG5112I
MSG5114I
MSG5118I
Double dipped PVC gloves with etched finish
12”
14”
18”
L
L
L
DZ
DZ
DZ
Price
$25.39
$28.06
$37.13
D
D. PVC Dipped Gloves
Made of 100% Poly Vinyl Chloride (PVC). Features an interlock lined construction.
SKU
Description
Finish
MSG5000
MSG5012
MSG5012R
MSG5014
MSG5014R
MSG5018
PVC dipped w/knit wrist
PVC dipped gloves
PVC dipped gloves
PVC dipped gloves
PVC dipped gloves
PVC dipped gloves
Smooth
Smooth
Rough
Smooth
Rough
Smooth
E
Length
Size
UOM
12”
12”
14”
14”
18”
XL
XL
XL
XL
XL
XL
DZ
DZ
DZ
DZ
DZ
DZ
Price
$15.24
$20.15
$21.06
$21.96
$23.55
$31.25
E. Snorkel®
One of our premium gloves, Snorkel features a unique PVC/Nitrile-blend rough finish which
provides outstanding chemical resistance, wear, and flexibility. The finish contains nylon particles that increase the glove’s cut/abrasion resistance and wet grip capabilities, while the PVC
compound provides greater flexibility and comfort. Fully coated, 12” gauntlet, jersey-lined.
160
SKU
Description
Size
UOM
ANS4412-10
Snorkel
L
DZ
Price
$56.08
A
A. Natural Blue™
Natural Blue gloves are 17 mil thick for superior tactile sensitivity and dexterity, as well as good
chemical, snag, puncture, abrasion- and cut-resistance. Made with component materials that
comply with FDA regulations for food contact, the gloves feature a patterned grip and a conspicuous blue color which is preferred by the poultry and food processing industries. 12” long.
Description
Size
UOM
Natural Blue gloves
7-10
DZ
Price
$12.40
B. FL100/FL200
B
These natural latex, cotton flock-lined gloves provide a high degree of tensile strength while
maintaining excellent sensitivity. Embossed pattern design provides improved grip on wet or
dry objects. Made from component materials that comply with FDA regulations for food contact.
*Caution: This product contains natural rubber latex which may cause allergic reactions in
some individuals.
SKU
Description
Thickness
Length
Size
UOM
ANS155-7
ANS155-8
ANS155-9
ANS155-10
Blue unsupported flock lined gloves
17 mil
17 mil
17 mil
17 mil
12”
12”
12”
12”
7
8
9
10
DZ
DZ
DZ
DZ
Price
$11.13
$11.13
$11.13
$11.13
C
C. Canners and Handlers™
Unsupported, unlined, medium-duty, natural rubber latex. Featuring excellent dexterity, tensile
strength, and elasticity, our 20-mil Canners and Handlers gloves are a good choice for chemical, snag, puncture, abrasion, and cut resistance. 14” length for added protection against
chemical hazards. Embossed design for excellent grip on wet or dry surfaces. Canners and
Handlers gloves are made with component materials that comply with FDA regulations for food
contact. Natural, pebble embossed, 20 mil, 12”. *Caution: This product contains natural rubber latex which may cause allergic reactions in some individuals.
SKU
Description
Size
UOM
ANS392ANS392
Canners and Handlers gloves
7-11
DZ
D
Price
$14.02
D. Orange Heavyweight
With a 29 mil palm thickness that is 50% greater than most standard flock-lined gloves, Orange
Heavyweight gloves provide added protection against chemical and physical hazards due to
their increased puncture/cut resistance and tensile strength. In addition, the 100% cotton flock
lining increases user comfort. Diamond embossed palm improves grip in wet environments.
SKU
Description
Length
Size
UOM
ANS208ANS208
Orange Heavyweight gloves
13”
7-10
DZ
Price
$25.20
E
E. Latex Flock Lined Gloves - USDA
This .018” thick glove is 12-inches in length and features an embossed grip, palm, fingers and
straight cuffs. It has USDA acceptance for use in food processing applications. One dozen pair
per poly bag.
SKU
Description
Size
UOM
MSG4250
Latex flocked lined gloves
8-10
DZ
Price
$11.74
161
SKU
ANS356ANS356
A
A. TNT® Blue Thin Nitrile Gloves
Disposable nitrile gloves set a whole new standard in durability and chemical splash protection. Features textured finger tips for exceptional grip. Recommended for manufacturing,
light-duty maintenance, automotive, intricate parts handling, laboratory analysis and technical
work. Lightly powdered in a clean polybag. Superior flexibility, puncture resistance, made of
100% nitrile. The glove contains absolutely no fillers, additives, silicones or plasticizers. Rolled
cuff gives additional cuff strength and protects the skin from chemicals running off the glove.
Complies with FDA regulations for food contact.
SKU
Description
Thickness
Size
UOM
Price
ANS92575
ANS92575XL
TNT nitrile gloves lightly powdered
TNT nitrile gloves lightly powdered
4 mil
4 mil
S-L
XL
100/BX
100/BX
$9.83
$9.83
Hand Protection Disposable
B
B. Touch N Tuff®
Touch N Tuff disposable gloves set a whole new standard in comfort, durability, dexterity
and cleanliness. Made of 100% nitrile, the gloves contain absolutely no fillers, silicones or
plasticizers. Although they are only 4 mils thick, Touch N Tuff gloves provide three times the
puncture resistance of competitive latex or vinyl gloves. 9.5 inches in length, they are available
powdered or powder-free.
SKU
Description
Size
UOM
ANS92500S
ANS92500M
ANS92500L
ANS92500XL
ANS92600S
ANS92600M
ANS92600L
ANS92600XL
Touch-N-Tuff, lightly powdered
Touch-N-Tuff, powder free
S
M
L
XL
S
M
L
XL
100/BX
100/BX
100/BX
100/BX
100/BX
100/BX
100/BX
100/BX
Price
$10.48
$10.48
$10.48
$10.48
$13.05
$13.05
$13.05
$13.05
C
C. Touch N Tuff®
Touch N Tuff 92-616 disposable gloves are made of 100% nitrile and offers three times the
puncture resistance of standard latex or vinyl gloves. They give a high level of protection
against hydrocarbons, fats, grease and alcohols and combines excellent fingertip sensitivity
with exceptional durability. Lightweight and comfortable to wear, Touch N Tuff® gloves comply
with FDA food handling requirements (21 CFR 177.2600)
SKU
Description
Size
UOM
ANS92616
Touch-N-Tuff, powder free, textured finish, blue
XS-XL
150/BX
D
D. TNT® Blue Nitrile Gloves
TNT Blue disposable nitrile gloves are durable yet soft for improved comfort, and they feature
textures fingers for exceptional grip. These gloves are 5 mil thick and 9-1/2” in length. Component materials comply with FDA regulations for food contact. TNT gloves are static dissipative.
SKU
Description
Size
UOM
ANS92675
ANS92675XL
TNT Blue nitrile gloves powder-free
TNT Blue nitrile gloves powder-free
S-L
XL
100/BX
100/BX
162
Price
$11.00
$11.00
Price
$14.80
A. Dura-Touch™ Gloves
When you need economical hand/product protection, Dura-Touch clear 5-mil PVC gloves are
the best choice. They offer near “bare hand” dexterity and sensitivity, and they’re lightly powdered. Component materials comply with FDA regulations for food contact.
SKU
Description
Size
UOM
Price
ANS34-775
ANS34-775XL
Dura-Touch gloves
Dura-Touch gloves
M-L
XL
100/BX
100/BX
$5.08
$5.08
A
B. Poly-D Disposable Gloves
Low-cost, short-term protection for a variety of uses. Ambidextrous for use on right or left
hand. USDA accepted for meat and food handling. 0.25mil 100/Box.
SKU
Description
Size
UOM
Price
ANS35112L
ANS35112L
Poly-D disposable gloves
L
100/BX
$8.95
C
C. Nitri-Cor Blue Thin Nitrile Gloves
These 4 mil nitrile disposable gloves are lightly powdered industrial/food service grade. They
are made with USDA/FDA accepted materials for use in food service applications. Rolled cuff,
9” long.
SKU
Description
Size
UOM
Price
MSG4090
MSG4090XL
Nitri-Cor, powdered
Nitri-Cor, powdered
S-L
XL
100/BX
100/BX
$7.80
$7.80
D
D. Vinyl Disposable Gloves
Non-exam food grade, blue vinyl gloves are lightly powderer with a rolled cuff. They have a
thickness of 5 mil and a 9” length.
SKU
Description
Size
UOM
Price
MSG4071
MSG4071XL
Vinyl disposable gloves
Vinyl disposable gloves
S-L
XL
100/BX
100/BX
$4.26
$4.26
E
E. Latex Disposable Gloves
These 5 mil latex disposable gloves are available in exam or industrial grade. Rolled cuff, 9”
long.
SKU
Description
Size
UOM
Price
MSG4010
MSG4010XL
MSG4015
MSG4015XL
MSG4020
MSG4020XL
Latex disposable gloves, powder free, exam grade
Latex disposable gloves, powder free, exam grade
Latex disposable gloves, powder free, industrial grade
Latex disposable gloves, powder free, industrial grade
Latex disposable gloves, powered, industrial grade
Latex disposable gloves, powered, industrial grade
XS-L
XL
XS-L
XL
S-L
XL
100/BX
100/BX
100/BX
100/BX
100/BX
100/BX
$8.89
$9.07
$7.43
$7.42
$6.89
$6.89
163
Disposable Hand Protection
B
A. High Voltage Linemen’s Gloves
A
Manufactured for outstanding protection, comfort and long-life. Rubber insulating gloves are
among the most important articles of personal protection for electrical workers. Contrasting
two color combination allows for easy inspecting of gloves for cuts and tears when the glove
is inflated or stretched. Incorporating high dielectric and physical strength, flexibility and durability,
Salisbury rubber insulating gloves have earned the reputation for superior performance - meeting and exceeding the requirements of current ASTM D120 specifications.
Hand Protection High Voltage
SKU
Description
Color
SAL2014RB8
SAL2014RB85
SAL2014RB9
SAL2014RB95
SAL2014RB10
SAL2014RB105
SAL2014RB11
SAL2014RB115
High voltage linemen’s gloves, 14”
Red/black
Red/black
Red/black
Red/black
Red/black
Red/black
Red/black
Red/black
ASTM Class
Size
UOM
II
II
II
II
II
II
II
II
8
8.5
9
9.5
10
10.5
11
11.5
PR
PR
PR
PR
PR
PR
PR
PR
Price
$172.47
$172.47
$172.47
$172.47
$172.47
$172.47
$172.47
$172.47
B. Leather Glove Protectors
ILP Series leather protectors are manufactured from grain cowhide or goatskin. These protectors provide excellent protection for rubber insulating gloves at an economical price. Cowhide
and pigskin cuffs are tough leather on palm side and orange vinyl on the back. ILP Series
protectors feature adjustable straps with non-metallic buckles and are stitched with polyester
thread for strong seams.
SKU
Description
Material
Length
Size
UOM
SALILPG10A8
SALILPG10A9
SALILPG10A10
SALILPG10A11
SALILP108.5
SALILP109.5
SALILP1010.5
SALILP1011.5
Leather glove protectors, high voltage
Leather glove protectors, low voltage
Goatskin
Goatskin
Goatskin
Goatskin
Cowhide
Cowhide
Cowhide
Cowhide
12”
12”
12”
12”
10”
10”
10”
10”
8/8.5
9/9.5
10/10.5
11/11.5
8/8.5
9/9.5
10/10.5
11/11.5
PR
PR
PR
PR
PR
PR
PR
PR
C
Price
B
$23.10
$23.10
$23.10
$23.10
$22.70
$22.70
$22.70
$22.70
C. Insulating Rubber Gloves
Salisbury by Honeywell gloves combine high dielectric and physical strength with flexibility
and durability to meet and exceed the requirements of current ASTM D120 specifications and
NFPA 70E standards. These insulating rubber gloves are Class 0 rated for low voltage use with
a maximum use voltage of 1,000. They are 11” in length.
164
SKU
Description
Size
UOM
SALE011B-8
SALE011B-9
SALE011B-10
Insulating rubber gloves
8
9
10
PR
PR
PR
Price
$64.31
$64.31
$64.31
A
A. 24 oz. Hot Mill Gloves with Band Top
100% cotton quilted with nap-out palm, thumb and index finger. Knuckle straps. Economy
weight. Band Top. Industry applications include: foundries, forging operations and other applications requiring heat protection.
Description
UOM
MSG2500
24 oz. hot mill gloves with band top
DZ
Price
$18.52
B
B. 24 oz. Hot Mill Gloves with Gauntlet Cuffs
100% cotton quilted with nap-out palm, thumb and index finger. Knuckle straps. Regular
weight. 4-1/2” Gauntlet cuffs. Industry applications include: foundries, forging operations and
other applications requiring heat protection.
SKU
Description
UOM
MSG2505
24 oz. hot mill gloves with gauntlet cuffs
DZ
Price
$22.65
C
C. Heavy Weight Hot Mill Gloves
Heavy weight hot mill gloves with 3 ply palms made of cotton-burlap-cotton. Features a knuckle strap and a band top.
SKU
Description
UOM
MSG2515
Heavy weight hot mill gloves
DZ
Price
$24.93
D
D. Kelklave Autoclave Gloves
Kelklave Autoclave Gloves have a 5” gauntlet cuff and feature a clute pattern. The Kelklave
resists heat temperatures up to 250°F, offering protection to the hands.
SKU
Description
UOM
JOM4225
Kelklave autoclave gloves
DZ
Price
$80.00
165
High Heat Hand Protection
SKU
A. Barrier™
A
A major breakthrough in flat-film glove technology, Barrier gloves feature a unique non-woven
liner that absorbs perspiration and makes the gloves comfortable to wear, especially for extended periods. In addition, the winged-thumb, hand-specific design provides greater dexterity.
Proprietary seam-fusion technology provides a secure seal against chemicals and also assures a flexible, comfortable fit for greater dexterity and reduced hand fatigue.
SKU
Description
Thickness
Size
UOM
Price
ANS2-100ANS2-100
Barrier flat film chemical resistant gloves
2.5 mil
6-11
PR
$6.65
Hand Protection Accessories
B
B. Hot Not™ Gloves
Hot Not heat-resistant gloves allow you to work around and handle hot engines, machinery,
ovens and most any hot industrial process without burning your fingers. You can constantly
handle many materials 500 °F or less and intermittently handle materials up to 700 °F. The
HOT Not glove can withstand accidental contact with flame or solid hot objects up to 2000 °F.
Comfortable, flexible and breathable. Machine washable and dryable. 100% Nomex IIIA. One
size fits all. Seamless stretch knit.
SKU
Description
UOM
ESP200
Hot Not glove
PR
C
Price
$47.28
C. Plastic Glove Dispensers
Plastic box glove dispenser with table and wall mount for easy access.
HORI5101 HORI5107 HORI5102W HORI51015
SKU
Description
Dimensions
UOM
HORI5101
HORI5102-W
HORI5103
HORI5105
HORI5107
1 box dispenser clear plastic
1 box dispenser white plastic
9 1/2”H x 11”W x 4”D
9 1/2”H x 11”W x 4”D
10”H x 11”W x 4”D
15 ¼”H x 11”W x 4”D
20”H x 11”W x 4” D
EA
EA
EA
EA
EA
HORI5103 D
D. No Spill™ Top Dispensing Glove Racks
Glove box opening faces up to prevent gloves from falling on the floor – reducing waste. Extra
gloves can easily be placed on the top of the box. Powder coated steel to resist bleaches,
solvents, and common acids.
SKU
Description
Dimensions
UOM
HORI4008
HORI4009
HORI4010
HORI4015
1 box “1 hand” top dispensing exam glove rack
2 box top dispensing exam glove rack
4 1/4”H x 11 1/2”W x 1/2”D
9 1/4”H x 14”W x 7”D
16 1/2”H x 14”W x 7”D
24 1/2"H x 14"W x 7"D
EA
EA
EA
EA
166
Price
$27.91
$46.74
$56.53
$70.81
HORI4008
HORI4015
Price
$33.39
$31.70
$45.65
$54.26
$65.77
A. Glove
Guard®
A
Holder
SKU
Description
UOM
Price
GOFIN1939
GOFIN1939YL
Granite Glove Guard with Medsafe logo
Yellow Glove Guard with no logo
EA
EA
$4.85
$4.85
B
B. Squids® Glove Grabber™
The Glove Grabber is a handy and cost effective device for improving worker safety by making
it easier than ever to keep gloves within reach at all times. Using a patent-pending design that
opens smoother and wider, the Glove Grabber holds gloves of every style and thickness and
for virtually any application.
SKU
Description
UOM
Price
ERG3400Y
Squids Glove Grabber
EA
$2.72
C
C. Glove Bag
Glove bag made from lightweight yellow vinyl with snap closures and attachment hooks.
SKU
Description
Size
UOM
SAL55-14
Yellow vinyl glove bag
16”
EA
Price
$32.17
D
D. Canvas Glove Bags
Salisbury by Honeywell bags are constructed of heavy duty canvas duck and are double
stitched at stress points for extra durability. Canvas bags feature a D-ring for hanging in trucks
or on work belts. Bags feature tapered gussets with wide opening tops for easy insertion.
SKU
Description
Size
UOM
SALGB114
SALGB116
SALGB118
Canvas glove bag, holds 14” glove
9” x 16”
9” X 18”
9” X 20”
EA
EA
EA
Price
$32.17
$35.33
$37.17
167
Accessories Hand Protection
Glove Guard with a proven record of over ten years keeps gloves close at hand while keeping
the worker safe with the patented break-away center. Made of engineered grade material that
holds its memory and resists flex fatigue as well as being non-conductive and non-corrosive,
its sleek design lies close to the body so as not to interfere with job activities.

Hand Protection

Transcription

Similar documents

neopreno TRAD AN

Mechanics, industrial/factory workers, dry cleaners, etc. can safely

MaxiFlex® Ultimate

95782G Storm Trooper

Mehndi Art Gloves - Blick Art Materials

Powder-Free Black Latex Exam Gloves

NEN AFS18 - News

The Faithful Fashionista: Power of the Purse

Zanier Sports Overview