9 FLO ATING POWER DRIVE REAMER

FLOATING POWER DRIVE REAMER
ADAPTER
Precision made of blued steel, this floating
adapter will allow the reamer to find it’s own
center when using 1/2” or 3/8” capacity variable
speed drills, drill presses or lathes as a power
source.
Stock #
For Colonial™ Tools
11-FAPDA
For Clymer™ Tools
13-FAPDA
FLOATING ADAPTER WITH MORSE
TAPERS FOR USE IN LATHES
Colonial™ Tooling
Stock #
#1 Morse Taper
11-FA1MT
#2 Morse Taper
11-FA2MT
#3 Morse Taper
11-FA3MT
Clymer™ Tooling
Stock #
#1 Morse Taper
13-FA1MT
#2 Morse Taper
13-FA2MT
#3 Morse Taper
13-FA3MT
TYPE 11 TOOLING
COLONIALREAMER ADAPTER
The Colonial Reamer Adapter allows the ream er to properly connect and seat with the pilot
when encountering those guns with longer than
normal chokes by extending the shank one inch
in length.
Stock#
10-12-16-20 Ga.
11-R2ADP
28-410 Ga.
15-R2ADP
COLONIALARMS
FLOATING TAPWRENCH
Colonial Arms Floating Tap Wrench is designed
to prevent mis-alignment of the reamer or tap
while reaming or threading for choke tube
installations. The end of the wrench, which
attaches to the shank of the tool, is floating
allowing it to find its own center.
Stock #
For Colonial™ Tools
11-FTWRN
For Clymer™ Tools
13-FTWRN
CENTERING MANDREL
Centers 12 Gauge over/under and double barrel
shotgun barrels in a lathe for choke tube installation. (Special order adapters available for
other gauges.)
Stock #
15-CMODB
BARRELHONE
Self-aligning and self-centering with adjustable
tension, smooth action for perfect finishes,
operates with all drills.
Stock #
11-ADHON
REPLACEMENT STONES
11-RSHON
COLONIALARMS
CHOKE TUBE WRENCH
Colonial’s Choke Tube Wrench is designed to
carry in your wallet, pocket or key chain. One
size fits all gauges.
Stock #
BARRELSEATING SPACER
The Barrel Seating Spacer is placed on the
choke tube reamer for the initial cutting operation, stopping the reamer before final seat is
cut allowing the tap to bottom. The reamer is
then reinserted to make the final cut producing a nice clean seating surface with no
marks from the tap.
Stock#
10 Ga. (.865x44)
10-RMBSS
12 Ga. (.795x44)
12-RMBSS
12 Ga. (Rem-Choke®/ Invector)
(Winchoke®) (.812x32) 12-RVBSS
12 Ga. (Thin Wall) (.774x44)
12-TWBSS
16 Ga. (.718x44)
16-RMBSS
20 Ga. (.675x44)
20-RMBSS
28 Ga. (.613x44)
28-RMBSS
410 Ga. (.478x44)
41-RMBSS
SNAPRINGS
Secures hollow Bronze Pilot Bushings to
Type II Reamers and Taps.
Stock#
10-12-16-20 Ga.
11-SNPT2
28-410 Ga.
15-SNPT2
COLONIAL
REAMER-TAPPING FLUID
An extremely high
grade Reaming and
Tapping Oil that
can replace straight
oils in most applications.
Allows
maximum production and tool life,
more accurate sizing, and has low
surface tension. 1
quart
Stock#
1 Quart 11-RTOIL
COLONIAL BARRELHONING OIL
Colonial Barrel
Honing Oil keeps the
pores of stones open
and free from loading
up. Prevents galling
and ringing on interior
surfaces. Fast cutting,
it produces a mirror
surface in much less
time than other oils. 1
pint.
1 Pint
Stock#
11-HNOIL
11-CTWRN
9