henkel-hysol-0151-50..

Transcription

Material Safety Data Sheet
Henkel
Revision Number: 002.1
Issue date: 07/22/2009
1. PRODUCTAND COMPANY IDENTIFICATION
Product name;
Product type:
Hysol 0151 HARD
Epoxy Hardener
IDH number:
702120
Item number:
83069_AB0151
Region:
United States
Contact information:
Telephone: 860.571.5100
Emergency telephone: 860.571.5100
Internet: www.henkelna.com
Company address:
Henkel Corporation
One Henkel Way
Rocky Hill, Connecticut 06067
2. HAZARDS IDENTIFICATION
Physical state:
Color:
Odor:
EMERGENCY OVERVIEW
HMIS:
Paste
HEALTH:
Translucent, Amber
FLAMMABILITY:
Ammoniacal
PHYSICAL HAZARD:
Personal Protection:
DANGER:
*3
1
0
See MSDS Section 8
CAUSES EYE AND SKIN BURNS.
MAY CAUSE ALLERGIC SKIN AND RESPIRATORY REACTION.
MAY CAUSE RESPIRATORY TRACT IRRITATION.
MAY BE HARMFUL IF SWALLOWED.
Relevant routes of exposure:
Skin, Inhalation, Eyes, Ingestion
Potential Health Effects
Inhalation:
Allergic respiratory reaction. May cause respiratory tract irritation. May cause irritation to nose
and throat.
May cause skin burns. Aliergic skin reaction. Rash. Redness.
Bums. Severe eye irritation. Redness. Tissue damage.
May be harmful if swallowed. May cause burns of mouth and throat if swallowed.
Skin contact:
Eye contact:
Ingestion:
Existing conditions aggravated by
exposure:
Eye, skin and respiratory disorders. Skin allergies.
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR
1910.1200).
See Section 11 for additional toxicological information.
3. COMPOSITION / INFORMATION ON INGREDIENTS
Hazardous components
Fatty acids, C18-unsatd., dimers, reaction products with
polyethylenepolyamines
Triethylenetetramine
Silicon dioxide
CAS NUMBER
%
68410-23-1
60-100
112-24-3
7631-86-9
10-30
1 -5
4. FIRST AID MEASURES
Inhalation:
Move to fresh air. If not breathing, give artificial respiration. If breathing is
diificult, give oxygen. Get medical attention.
IDH number: 702120
Product name: Hysol 0151 HARD
Page 1 of 5
Skin contact:
Immediately flush skin vi/ith plenty of water (using soap, if available). Remove
contaminated dothing and footwear. Wash clothing before reuse. Thoroughly
clean shoes before reuse. If symptoms develop and persist, get medical
attention.
Eye contact:
Immediately flush eyes with plenty ofwater for at least 15 minutes. Get
medical attention.
Ingestion:
DO NOT induce vomiting unless directed to do so by medical personnel. Keep
individual calm. Get immediate medical attention.
5. FIRE FIGHTING MEASURES
Flash point:
> 129.5 X (> 265.1 °F); Esflmated
Autoignition temperature:
Not available
Flammable/Explosive limits - lower:
Not available
Flammable/Explosive limits - upper:
Not available
Extinguishing media:
Water spray (fog), foam, dry chemical or carbon dioxide.
Special firefighting procedures:
Wear self-contained breathing apparatus and full protective clothing, such as
turn-out gear.
Unusual fire or explosion hazards:
In case of fire, keep containers cool with water spray.
Hazardous combustion products:
Oxides of carbon. Oxides of nitrogen. Irritating organic fragments.
8. ACCIDENTAL RELEASE MEASURES
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected
personnel.
Environmental precautions:
Do not allow product to enter sewer or waterways.
Clean-up methods:
Remove all sources of ignition. Immediately contact emergency personnel.
Scrape up as much material as passible. Clean residue with soap and water.
Store in a partly filled, closed container until disposal.
7. HANDLING AND STORAGE
Handling:
Keep away from heat, spark and flame. Do not breathe
gas/fumes/vapor/spray. Keep container closed. Avoid contact v/ith eyes, skin
and clothing. Wash thoroughly after handling.
storage:
Store in original container until ready to use. Keep in a cool, well ventilated
area away from heat, sparks and open flame. Keep container tightly closed
until ready for use.
For information on product shelf life contact Henkel Customer Service at (800) 243-4874.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Employers should complete an assessment of all workplaces to determine the need for, and selection of, proper exposure
controis and protective equipment for each task performed.
IDH number: 702120
Page 2 of 5
Fatty acids, Cl 8-unsatd., dimers, reaction products
with polyethylenepolyamines
Silicon dioxide
ACGIH TLV
OSHA PEL
AIHA WEEL
OTHER
None
None
None
None
None
None
1 ppm (6 mg/m3)
TWA
(SKIN)
None
6 mg/m3 TWA
20 MPPCF TWA
0.8 mg/m3 TWA
None
3 mg/m3 TWA
Respirable fraction.
Engineering controls:
Provide adequate local exhaust ventilation to maintain worker exposure below
exposure limits.
Respiratory protection:
Use a NIOSH approved air-purifying respirator if the potential to exceed
established exposure limits exists.
Eye/face protection:
Safety goggles or safety glasses with side shields.
Skin protection:
Use chemical resistant, impermeable clothing including gloves and either an
apron or body suit to prevent skin contact. Chemical resistant, impermeable
gioves.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state:
Color:
Odor:
Odor threshold:
pH:
Vapor pressure:
Boiling point/range:
Melting point/ range:
Specific gravity:
Vapor density:
Flash point:
Evaporation rate:
Solubility in water:
Partition coefficient (n-octanol/water):
v o c content:
Paste
Translucent, Amber
Ammoniacal
Not available
Not applicable
0.01 mm hg (20 "C (68"^))
270°C(518°F)
Not available
0.98
5
> 129.5 "C (> 265.1 °F); Estimated
Not available
Not available
Not available
Not available
Not miscible or difficult to mix
Not available
0 % (value for resin and hardener together)
10. STABILITY AND REACTIVITY
Stability:
Stable
Hazardous reactions:
Polymerization is a highly exothermic reaction and may generate sufficient
heat to cause thermal decomposition and/or rupture containers.
Hazardous decomposition products:
None
Incompatible materials:
Strong acids. Strong bases. Strong oxidizing agents. Amines. Water.
Conditions to avoid:
Avoid temperatures above 38°C (100°F). Excessive heat. Store away from
incompatible materials. Avoid mixing resin (Part A) and curing agent (Part B)
unless you plan to use immediately. Failure to observe these precautions may
result in excessive heat build-up causing an exotherm.
IDH number: 702120
Page 3 of 5
11. TOXICOLOGICAL INFORMATION
OSHA Carcinogen
NTP Carcinogen
IARC Carcinogen
No
No
No
No
No
No
No
No
No
Fatty acids, C18-unsatd., dimers, reaction
products with polyethylenepolyamines
Silicon dioxide
(Specifically Regulated)
Health Effects/Target Organs
Fatty acids, Cl 8-unsatd., dimers, reaction products with
polyethylenepolyamines
Silicon dioxide
Corrosive, Imtant
Allerqen, Corrosive, Developmental, Irritant, Mutagen
Nuisance dust
12. ECOLOGICAL INFORMATION
Ecological information:
Not available
13. DISPOSAL CONSIDERATIONS
Information provided is for unused product only.
Recommended method of disposal:
Follow all local, state, federal and provincial regulations for disposal.
Hazardous waste number:
Not a RCRA hazardous waste.
14. TRANSPORT INFORMATION
U.S. Department of Transportation Ground (49 CFR)
Proper shipping name:
Triethylenetetramine solution
Hazard class or division:
8
Identification number:
UN 2259
Packing group:
II
Exceptions:
(Not more than 1 L), Consumer Commodity, ORM-D
International Air Transportation (ICAO/IATA)
Packing group:
Water Transportation (IMO/IMDG)
Packing group:
Triethylenetetramine solution
8
UN 2259
II
TRIETHYLENETETRAMINE soiution
8
UN 2259
15. REGULATORY INFORMATION
United States Regulatory Information
TSCA 12(b) Export Notification:
All components are listed or are exempt from listing on the Toxic Substances Control Act
Inventory.
None above reporting de minimus
CERCLA/SARA Section 302 EHS:
CERCLA/SARA Section 311/312:
CERCLA/SARA 313:
Immediate Health, Delayed Health
California Proposition 65:
No California Proposition 65 listed chemicals are known to be present.
TSCA 8 (b) Inventory Status:
IDH number: 702120
Page 4 of 5
Canada Regulatorv Information
CEPA DSL/NDSL Status:
WHMIS hazard class:
All components are listed on or are exempt from listing on the Canadian Domestic
Substances List.
D.2.A, D.2.B, E
16. OTHER INFORMATION
This material safety data sheet contains changes from the previous version in sections: New Material Safety Data Sheet
format.
Prepared by: Gary Pierson, Sr. Regulatory Affairs Specialist
DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However,
Henkel Corporation does not assume responsibility for any results obtained by persons over whose methods Henkel
Corporation has no control. It is the user's responsibility to determine the suitability of Henkel's products or any
production methods mentioned herein for a particular purpose, and to adopt such precautions as may be advisable for the
protection of property and persons against any hazards that may be involved in the handling and use of any of Henkel
Corporation's products. In iight of the foregoing, Henkel Corporation specifically disclaims all warranties, express or
implied, including warranties of merchantability and fitness for a particular purpose, arising from sale or use of Henkel
Corporation's products. Henkel Corporation further disclaims any liability for consequential or incidental damages of any
kind, including lost profits.
IDH number: 702120
Page 5 of 5
Material Safety Data Sheet
Henkel
Revision Number: 002.1
Issue date: 07/23/2009
1. PRODUCTAND COMPANY IDENTIFICATION
Product name;
Product type:
Hysol 0151 RESIN
Epoxy resin
IDH number:
702119
Item number:
83069_193035
Region:
United States
Contact information:
Telephone: 860.571.5100
Emergency telephone: 860.571.5100
Internet: www.henkelna.com
Company address:
Henkel Corporation
One Henkel Way
Rocky Hill, Connecticut 06067
2. HAZARDS IDENTIFICATION
Physical state:
Color:
Odor:
EMERGENCY OVERVIEW
HMIS:
HEALTH:
FLAMMABILITY:
PHYSICAL HAZARD:
Personal Protection:
Liquid
Milky, White
None
WARNING:
*2
1
0
See MSDS Section 8
MAY CAUSE ALLERGIC SKIN AND RESPIRATORY REACTION.
MAY BE HARMFUL IF SWALLOWED, ABSORBED THROUGH SKIN OR
INHALED.
MAY CAUSE EYE, SKIN AND RESPIRATORY TRACT IRRITATION.
COMBUSTIBLE LIQUID AND VAPOR.
Relevant routes of exposure:
Skin, Inhalation, Eyes, Ingestion
Potential Health Effects
Inhalation;
Allergic respiratory reaction. May be harmful if inhaled. Coughing. Shortness of breath. Mild
respiratory tract irritation.
Allergic skin reaction. May be harmful if absorbed through skin. Itching. Redness.
Severe eye irritation. If left untreated, corneal damage can occur and injury is stow to heal.
May be harmful if swallowed.
Skin contact:
Eye contact:
Ingestion;
Existing conditions aggravated by
exposure;
Eye, skin and respiratory disorders. Skin allergies. Respiratory allergies. Asthma.
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR
1910.1200).
See Section 11 for additional toxicological information.
3. COMPOSITION / INFORMATION ON INGREDIENTS
CAS NUMBER
%
Epichlorohydrin-4,4'-isopropylidene diphenol resin
Butyl 2,3-epoxypropyl ether
Silicon dioxide
25068-38-6
2426-08-6
7631-86-9
60-100
10-30
1 -5
4. FIRST AID MEASURES
Inhalation:
Move to fresh air. If not breathing, give artificial respiration. If breathing is
difficult, give oxygen. If symptoms develop and persist, get medical attention.
IDH number: 702119
Product name: Hysol 0151 RESIN
Page 1 of 5
Skin contact:
Immediately flush skin vi/ith plenty of water (using soap, if available). Remove
contaminated dothing and footwear. If symptoms develop and persist, get
medical attention.
Eye contact:
Immediately flush eyesvi/ith plenty of water for at least 15 minutes. Get
medical attenflon.
Ingestion:
DO NOT induce vomiting unless directed to do so by medical personnel. Keep
individual calm. If symptoms develop and persist, get medical attention.
5. FIRE FIGHTING MEASURES
Flash point:
> 93.3 "C (> 199.94 °F) Pensky Martens dosed cup
Not available
Not available
Flammable/Explosive limits - upper;
Not available
Extinguishing media;
Foam, dry chemical or carbon dioxide.
Special firefighting procedures;
Wear self-contained breathing apparatus and full protective clothing, such as
turn-out gear.
Unusual fire or explosion hazards:
In case of fire, keep containers cool with water spray. Closed containers may
rupture (due to buNd up of pressure) when exposed to extreme heat.
Hazardous combustion products;
Oxides of carbon. Irritating organic fragments. Acids. Aldehydes.
6. ACCIDENTAL RELEASE MEASURES
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected
personnel.
Environmental precautions;
Do not allow product to enter sewer or waterways.
Clean-up methods:
Remove all sources of ignition. Immediately contact emergency personnel.
Scrape up as much material as passible. Clean residue with soap and water.
Store in a partly filled, closed container unfll disposal.
7. HANDLING AND STORAGE
Handling:
Keep away from heat, spark and flame. Do not breathe
gas/fumes/vapor/spray. Keep container closed. Avoid contact with eyes, skin
and clothing. Wash thoroughly after handling.
storage;
Store in original container until ready to use. Keep in a coal, well ventilated
area away from heat, sparks and open flame. Keep container tightly closed
until ready for use.
For information on product shelf life contact Henkel Customer Service at (800) 243-4874.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Employers should complete an assessment of all workplaces to determine the need for, and selection of, proper exposure
controis and protective equipment for each task performed.
IDH number: 702119
Page 2 of 5
ACGIH TLV
OSHA PEL
AIHA WEEL
OTHER
None
3 ppm TWA
(SKIN)
(Sensitizer.)
None
None
None
50 ppm (270
mg/m3) TWA
None
None
20 MPPCF TWA
0.8 mg/m3 TWA
None
3 mg/m3 TWA
Respirable fraction.
Silicon dioxide
6 mg/m3 TWA
Engineering controls:
Provide adequate local exhaust venfllation to maintain worker exposure below
exposure limits.
Respiratory protection:
Use a NIOSH approved air-purifying respirator if the potential to exceed
established exposure limits exists.
Eye/face protection:
Safety goggles or safety glasses with side shields.
Skin protection:
Chemical resistant, impermeable gloves.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state:
Color:
Odor:
Odor threshold:
pH:
Vapor pressure:
Boiling point/range:
Melting point/ range:
Specific gravity:
Vapor density:
Flash point:
Evaporation rate:
Solubility in water;
Partition coefficient (n-octanol/water);
VOC content:
Liquid
Milky, White
None
Not available
Not applicable
2 mm hg (20 °C (68°F))
140°C(284°F)
Not available
1.13
Not available
> 93.3 °C (> 199.94 "F) Pensky Martens dosed cup
Not available
Not available
Not available
Not available
Not miscible or difficult to mix
Not available
< 0.05 % (value for resin and hardener together) (estimated)
10. STABILITY AND REACTIVITY
stability:
Stable
Hazardous reactions:
Polymerization is a highly exothermic reaction and may generate sufficient
heat to cause thermal decomposition and/or rupture containers.
Hazardous decomposition products:
None knovfli
Incompatible materials:
Strong acids. Strong bases. Strong oxidizing agents. Amines. Water.
Conditions to avoid:
Avoid temperatures above 38°C (100°F). Excessive heat. Store away from
incompatible materials. Avoid mixing resin (Part A) and curing agent (Part B)
unless you plan to use immediately. Faiiure to observe these precauflons may
result in excessive heat build-up causing an exotherm.
11. TOXICOLOGICAL INFORMATION
Epichlorohydrin-4,4'-isopropylidene
diphenol resin
Silicon dioxide
OSHA Carcinogen
NTP Carcinogen
IARC Carcinogen
No
No
No
No
No
No
No
No
No
IDH number: 702119
(Specifically Regulated)
Page 3 of 5
Health Effects/Target Organs
Silicon dioxide
Allerqen, Irritant
Irritant, Allerqen, Central nervous system. Liver, Mutagen
Nuisance dust
12. ECOLOGICAL INFORMATION
Ecological information:
Not available
13. DISPOSAL CONSIDERATIONS
Information provided is for unused product only.
Recommended method of disposal:
Follow all local, state, federal and provincial regulations for disposal.
Hazardous waste number:
Not a RCRA hazardous waste.
14. TRANSPORT INFORMATION
The shipping classifications in this sections are for non-bulk packaging only (unless otherwise spedfled). Shipping classification may
be different for bulk packaging.
U.S. Department of Transportation Ground (49 CFR)
Combusflble liquid, n.o.s. (n-Butyl glycidyl ether)
Combusflble Liquid
NA 1993
Packing group:
III
Exceptions:
Not regulated. Up to 450 L max per inner/primary package when shipped as
originally packaged only
International Air Transportation (ICAO/IATA)
Packing group:
Not regulated
None
None
None
Water Transportation (IMO/IMDG)
Packing group:
Not regulated
None
None
None
15. REGULATORY INFORMATION
United States Regulatory Information
TSCA 8 (b) Inventory Status:
TSCA 12(b) Export Notification:
All components are listed or are exempt from listing on the Toxic Substances Control Act
Inventory.
CERCLA/SARA Section 302 EHS:
CERCLA/SARA Section 311/312:
CERCLA/SARA 313:
Immediate Health, Delayed Health, Fire
California Proposition 65:
This product contains a chemical known in the State of Califomia to cause cancer. This
product contains a chemical known to the State of Califomia to cause birth defects or other
reproductive harm.
Canada Regulatory Information
CEPA DSUNDSL Status:
WHMIS hazard class:
All components are listed on or are exempt from listing on the Canadian Domesflc
Substances List.
B.3, D.2.A, D.2.B
IDH number: 702119
Page 4 of 5
16. OTHER INFORMATION
This material safety data sheet contains changes from the previous version in sections; New Material Safety Data Sheet
format.
Prepared by: Gary Pierson, Sr. Regulatory Affairs Specialist
DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However,
Henkel Corporation does not assume responsibility for any results obtained by persons over whose methods Henkel
Corporation has no control. It is the user's responsibility to determine the suitability of Henkel's products or any
production methods mentioned herein for a particular purpose, and to adopt such precautions as may be advisable for the
protection of property and persons against any hazards that may be involved in the handling and use of any of Henkel
Corporation's products. In iight of the foregoing, Henkel Corporation specifically disclaims all warranties, express or
implied, including warranties of merchantability and fitness for a particular purpose, arising from sale or use of Henkel
Corporation's products. Henkel Corporation further disclaims any liability for consequential or incidental damages of any
kind, including lost promts.
IDH number: 702119
Productname: Hysol0151 RESIN
Page 5 of 5

henkel-hysol-0151-50..

Transcription

Similar documents

Material Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION Revision Number:

BONDERITE® M-NT 1820TM Pretreatment

(eoo) o+s-rzzo (rre) eoe-ozzr

(aoo) ear-rzzo (nre) soa-ozzr

(aoo) oas-rzzo (sre) aas-ozzr

(soo) oas-rzzo (sro) eoa-ozzr

46747 QUAD MAX sell sheet.ai

(MSDS) Kukui Nut Oil RBDW

robaL fo tnemtrapeD .SU teehS ataD ytefaS lairetaM

Untitled

Chemical Name: All Natural Laundry Detergent Manufacturer: Ecos

(aoo) oas-rzzo (rro) soe-azzr

Henkel Smile 2008

senai cimatec idh