Features - Absolute Pace

PACE GT - Features
TIG Welded Aluminium Semi-Monocoque Chassis featuring adjustable suspension mounts, seatbelt
mounts etc. No substandard time consuming pop rivet panelling required.
Premium Pushrod Suspension Design Front and Rear. Incorporating CNC Billet Aluminium A Arms &
Uprights with a choice of Urethane Bush or Teflon Rod Ends. Standard brakes are large 348mm rotors,
Brembo calipers and custom PACE custom spot caliper for handbrake.
Authentic body shape with enhanced symmetry and crispness of detail. Even if you are building a modern
styled GT40 replica you will still want to have the beautiful original body lines and the detail only found
on an original GT40. Compare our body shape to our competitors so called "authentic" body shapes.
Body consists of full gloss perfectly straight panels in Carbon Composite Construction and original style
inner panels for improved durability, rigidity and protection from water, dirt and debris. Doors are
reinforced Kevlar/Carbon construction. Inner panels are epoxy bonded to the outer panels. Even our roof
section is double skinned for enhanced strength and improved appearance. Precision stainless alignment
pins ensures perfect fit, finish and operation.
Accommodates a large range of engine and transaxle choices. Engine: Ford Windsor, Ford Modular
Aluminium 5.0lt (Coyote), Gen 3 & Gen 4 Holden/Chev engines from 5.7lt - 7.0lt, normally aspirated
and supercharged. Transaxle: ZF, Porsche, Audi, Ricardo, Albins sequential. Custom engine and
transaxle fitment available.
Superior safety - with breakaway front crumple zone, high rigidity 6mm wall thickness cockpit safety cell
and rigid housings to fully enclose and protect the twin fuel tanks. The advantage of increased torsional
stiffness of a monocoque chassis design.
Industry leading quality parts – CNC cut and TIG welded door hinges, engine mounts etc. Billet CNC
roller fuel caps with separate lockable internal caps, classic analog styled electronic custom gauges.
Superior weight distribution as the engine can be moved further forward and sit lower in the chassis than
other replica brands.
Intelligent self locating engine mount plates allow for flexibility and speed of installation. Includes
additional mid drivetrain mounts for enhanced support for large HP installations.
Build time is significantly reduced as every facet of the design has been optimized for quick and easy
assembly. Full colour 200+ page build manual & DVD provided. Build time can be as little as 6 months
part time.
Enhanced interior space with combination of original body dimensions and Monocoque style cabin
chassis section.
Extensive testing and compliance work has been performed for street registration in Australia - Chassis
Torsion and Beam, Body Panels, Suspension, Handling, Braking, Seat Mounts, Seat Belt Mounts, Bump
Steer etc plus certified parts and accessories. Please contact us for recommended engineers to assist with
registration in your state.
3$&(*7
3$&(*7
*7
3$&(*7
3$&(*7
*7
&RPIRUW
3HUIRUPDQFH
3$&(*7
3$&(*7
*7
6DIHW\
;/DUJHVW&RFNSLW6L]H
;'HHS:LGH6HDWLQJ3RVLWLRQ
;·µ'ULYHUV$FFRPPRGDWHG
;)XOO6SUXQJ6HDWV
;$GM+HLJKW6WHHULQJ&ROXPQ
;(QKDQFHG6KRFN7UDYHO
;)URQW6WRUDJH&RPSDUWPHQW
;$LU&RQGLWLRQLQJ
;$GM6HDW3RVLWLRQ
;$GM3HGDO+HLJKW6SDFLQJ
;&RFNSLW)UHVK$LU9HQWV
;3RO\%XVK6XVSHQVLRQ2SWLRQ
;4XLFN$GMXVWDEOH'DPSHQLQJ
;5RFNHU6XVSHQVLRQ
;$OXPLQLXP6DIHW\&HOO
;7UDFNGD\4XLFN+HLJKW$GM
;.HYODU5HLQIRUFHG'RRUV
;7LOWRQ5DFH3HGDOV
;(QKDQFHG%RG\6WUHQJWK
;/LJKW&DUERQ6WUHHW%RG\
;:LGH$QWL,QWUXVLRQ%DUV
;/LJKW$OXPLQLXP&KDVVLV
;&ROODSVLEOH6WHHULQJ&ROXPQ
;PP6ORWWHG5RWRUV
;)XOO\(QFORVHG)XHO7DQNV
;3LVWRQ%UHPER%UDNHV
;3LVWRQ8SJUDGH%UDNHV
;$GMXVWDEOH%UDNH%LDV
;2YHUVL]HG%UDNHV
;7HIORQ5RG(QGV6WDQGDUG
;/('+LJK/HYHO%UDNH/LJKW
;&$''HVLJQHG2SWLPLVHG
;&DOLSHU6W\OH+DQGEUDNH
;3RLQW6WUXFWXUDO5ROO%DU
;2SWLPLVHG%UDNH%LDV
;/RZ'UDJ)ODW)ORRU
;([WUHPHO\/LJKW:HLJKW
PACE GT
Suitable for Full Street Registration & Track Use
$28,995 Starter Package
Plus $14,995 Roller Add-On Kit
Plus $37,995 Finishing Add-On Kit
$28,995 Starter Package
Chassis Unit, some Suspension & Brake Components & some Fitted Body Panels
Chassis
Aluminium Semi-Monocoque TIG Welded Chassis
Removable Aluminium Front Panelling for Nose
Section and Radiator Support
Integrated Mounting Points for Suspension,
Engine, Transaxle, Steering etc.
Aluminium Door Hinges with Pivot Assemblies
Aluminium Front & Rear Clip Hinges
Suspension
CNC Billet Aluminium Uprights
CNC Billet Aluminium Upper/Lower Control Arms
Manual
Full Colour 600 Page Manual
Body
Full Gloss Gelcoat Finish
Carbon Fibre Composite Body Panels: Spyder,
Lower Sills, Front Clip, Rear Clip, Nostril Panel
Carbon Fibre & Kevlar Door Assemblies
Full Inner Panels for Spyder, Front & Rear Clips
Aluminium Door Anti-Intrusion Bars
Spyder & Lowe Sills Fitted & Aligned onto Chassis
All Body Panels Removable During Build
Brakes
4 Piston Brembo Calipers Front
4 Piston Brembo Calipers Rear
300mm Vented/Slotted Rotors Front
300mm Vented/Slotted Rotors Rear
(Larger Calipers & 350mm Rotors Optional)
$14,995 Roller Add-On Kit (price includes 20% loyalty discount)
Full Rolling/Steering Chassis, Fully Fitted/Aligned Body Panels. Supplied Unassembled
(Components can be ordered separately)
Chassis
4-Point Roll Cage Assembly
Engine Cross-Brace
Zinc Plated Rear Shock Mounting Bracket
Zinc Plated Front Shock Mounting Bracket
Bolt-on Engine Mount Brackets
Bolt-on Adaptor Plate Mount Bracket
Bolt-on Transaxle Mount Bracket
Body
Front Clip, Rear Clip & Doors Fitted, Aligned and
Hinging
Door Locks & Latches Supplied & Fitted
Stainless Body Alignment Pins
Drive Shafts
Pair Race Spec Chromoly Axles
Set CV Joint Assemblies
Set CV Boots, Flanges & Stainless Ties
Grease
Chromoly Outer Stub Axles
Hardware & Tool Kit
All Mounting Hardware
3 x Compartment Boxes with Colour Labels
Small & Large Shock Spanners
36mm Ratchet Socket for Axle Nuts
CNC Bullet Shaped Fitment Tool
Brakes
Brake Pads Front and Rear
Pad Pins & Spring Clips
Rotor Hub Rings
Suspension
CNC Billet Aluminium Uprights
CNC Billet Aluminium Upper/Lower Control Arms
Zinc Plated Steering Arm Brackets
Zinc Plated Toe Link Brackets
Zinc Plated Upright Double Shear Brackets
Zinc Plated Upper Control Arm Camber Brackets
Adjustable Dampening Billet Coilover Shocks
Adjustable Ride Height
Coilover Springs
Zinc Plated Chromoly Pushrods
Zinc Plated Chromoly Toe Links
Race Quality Wheel Bearings
Zinc Plated Chassis Suspension Mount Brackets
CNC Billet Aluminium Bellcranks
Zinc Plated Bellcrank Mounting Brackets
CNC Machined Rod End Shear Spacers
HD Teflon Rod Ends (Urethane Bushes optional)
Steering
Steering Rack with Adjustable Height Mounting
Collapsible Steering Column with Height Adjust.
Teflon Lined Steering Tie-Rack Ends
Stainless Ties for Steering Rack Boots
Prices / Specifications subject to change without notice. All prices include GST.
PACE GT
Suitable for Full Street Registration & Track Use
$37,995 Finishing Add-On Kit (price includes 20% loyalty discount)
All Finishing Components to Complete the Build, Supplied Unassembled
(Components can be ordered separately)
Brakes
CNC Bent and Machine Terminated Stainless
Brake Hard Lines
Certified Flexible Braided Hoses
All Required Brake Fittings for Complete System
Tilton Aluminium Triple Pedal Assembly with
Brake Bias Adjustment
Adjustable Pedal Pad Height and Spacing
Brake Master Cylinders (2 x Brake, 1 x Clutch)
Brake Remote Reservoirs & Bracket
Brake Fail Pressure Switches
Complete Handbrake Assembly with Custom Spot
Calipers, Cables, Mounting Brackets etc.
Pair ABS Plastic Brake Cooling Ducts
Stainless Hard Line Clamps
Stainless Brackets for Flexible Braided Hoses
Stainless Spring Clips for Flexible Braided Hoses
Brake Reservoir Labels
Drivetrain
Urethane Aluminium Engine Mounts
Urethane Gearbox Mount
Urethane Adaptor Plate Mounts
Exhaust Headers
CNC Billet Aluminium Adaptor Plate
Engine Bay & Tunnel Insulation (Marked Ready to
Cut & Fit)
Mirror Stainless Heatshield Panels for Engine Bay
Aluminium Rear Clip Inner Guard Panels
Aluminium Seal Panels for Side Pods
Fuel System
Twin Fuel Tanks with In-Tank Anti-Surge System
Rubber Insulated Tank Mounts
Polished Roller Latch Fuel Caps & Filler Tubes
EFI Fuel Pump, Regulator & Filter
Stainless Braided Teflon Fuel Flexible Lines
Emissions Charcoal Canister Kit
Fuel Breather Lines
Fuel Filler Hoses
Wheels
Pin Drive Aluminium 15” BRM Style Wheels
Pin Drive Adaptors
Lugnut Locating Pins
Polished Aluminium Centre Caps
Polished Forged Spinners
Pin Drive/Knock-Off Hammer
Cooling System
Aluminium radiator & Rubber Insulated Mounting
14” Duel Electric Fans
Coolant Tubes & Stainless Clamps
Aluminium Radiator Shroud
Polished Alloy Coolant Header & Overflow Tank
Aluminium Seal Panels for Radiator
Lighting
Adjustabe Headamp Assemblies
LED Clear Front Indicators
GT40 Replica Tailights
Clear LED High Brake
Number Plate Lights
Clear Side Indicators
Custom Small Round Reflectors
All Bulbs etc included
Electrical
Complete Classic 8 Gauge Set with Integrated
Warning Lights, Dual Fuel Level Gauges and
Integrated Discreet LEDs for High Beam, Turn
Signals, Ignition/Voltage, Seatbelt, Brake Fail/
Handbrake & Security
Senders for all Gauges
Complete Switch Set to Control Headlights,
Wiper, Hazard Lights, Demister & Squirters
Dash Mounted Ignition Switch
Push Button Red Start Button on Dash
Push Button Chrome Horn Button on Dash
Column Mounted Turn Signal Switch with
Headlamp Dip Function
Twin Tone Horn Set
Air Conditioning System with Heater/Demister
3 Point Immobiliser with Proximity Keyfob
Electronic Steering Lock
Gel Cell Battery
Zinc Plated Battery Mounting Bracket
Complete Wiper System with Arms & Blades, 2
Speeds and Auto Park
Twin Chrome Squirters with Washer Bottle
Wiring Loom Kit
Battery Cut-Off Switch
Handbrake Lever Switch
Cigarette Lighter Power Socket
Seat Belt Timer for LED Warning Light
Steering
15” Classic Style Black Leather Wheel
Steering Wheel Boss
Prices / Specifications subject to change without notice. All prices include GST.
PACE GT
Suitable for Full Street Registration & Track Use
$37,995 Finishing Add-On Kit (continued)
Interior & Boot
Classic Style Alloy Seat Frames with Sprung Base
Drivers Seat Slider
Retractable Lap Sash Seat Belts
Centre Mirror with Day/Night Function
Cable Shifter Assembly - Centre or RH Mount
Polished Aluminium Gear Knob
Handbrake Lever
Polished Aluminium Handbrake Handle Grip
Dash Panel
Adjustable Fresh Air Vent System (Drv and Pass)
Interior Insulation Kit
Classic Door Exterior Handles
Classic Door Interior Handles
Retractable Seatbelts
Warning Labels - Dash/Firewall & Seatbelts
ABS Plastic Interior Trim Panels - Door Hinge
Covers, Infill Panels, Seatbelt Retractor Covers
Rubber Boots to Seal Rear Pushrods
ABS Plastic Infill Panels to Seal Suspension/Boot
Rubber Seals for Doors, Bonnet and Boot
Aluminium Rear Inner Guard Seal Panels
Side Pod Front and Rear Seal Panels
Hardware & Tool Kit
All Mounting Hardware
Compartment Boxes with Colour Labels
Specialist Tools - Shock Spanners, Axle Socket,
Bullet Tool, Switch Spanner, Lead Wheel Hammer
Support
Full colour build manual 500+ pages with DVD
Phone and Email support
In person visits to talk to our staff
Required Components to Finish Vehicle:
Engine and Associated Wiring & Accessories
Transaxle, Flywheel, Clutch etc.
Remaining Exhaust Parts from Headers
Trimming for Supplied Interrior Components
Tyres
Some miscellaneous items - fluids, adhesives etc
Paint (if required)
Kits Include all mounting hardware, brackets &
fasteners for all components listed.
Not every component supplied in each kit is
listed in this brochure, this is an overview only.
See packing lists for full listing of supplied
components.
Exterior Bright Work & Accessories
Number Plate Mounting Bracket
Gas Strut Front Clip Stays with Mounting Brackets
Gas Strut Rear Clip Stays with Mounting Brackets
Glass Windscreen
Acrylic Cover Set for Headlights, Driving Lights,
Windows, Spyder Rear Window, Rear Clip
Window
Nostril Panel Fasteners
Front & Rear Clip Latches
Rear Clip Top Locking Pin Set Kit
Door latches with enhanced 2-stage locking
Drivers & Passenger External Mirrors
Stainless Front & Rear Clip Latches
Registration Certifications
Chassis Torsional & Beaming
Suspension & Associated Mounts
Bump Steer
Seats
Seat Mounts
Seat Belt Mounts
Collapsible Steering Column
Door Anti-Intrusion Bars
Lights & Reflectors
Double Lane Change Manoeuvre
Brake Lines & Fuel Hoses
Wheels
Windscreen Wiper Swept Area
Steering Wheel & Boss
Seat Belts
Etc
Payment Scheme
$5,000 Deposit on Order of Starter Kit.
$9,500 Payment for Start of Manufacture
$7,250 Progress for Completion of Body & Chassis
$7,245 Balance Payment - Kit is Ready for Delivery
50% Deposit to order Roller Add-On Kit
50% Deposit to order Finishing Add-On Kit
(Required just before delivery of kit when Add-On
kit components are being sorted for delivery)
Full payment for options required before delivery to
allow time for the parts to be organised/reserved.
Prices / Specifications subject to change without notice. All prices include GST.
PACE GT
Suitable for Full Street Registration & Track Use
STANDARD MODEL
PRICE
GT-S (Street)
PACE
Standard Carbon Composite body structure with Kevlar/Carbon Composite Doors.



$0
Aluminium TIG Welded Chassis with CNC Billet Aluminium Suspension Arms.
OPTIONAL MODEL
PRICE
GT-SS (Super Street)
PACE
Enhanced body with significantly higher carbon content & upgraded VE resin to pro



$2485
duce lighter, stronger and more resilient panels. This is a VERY popular option.
OPTIONAL MODEL
PRICE
GT-SR (Street Race) or R (Race)
PACE
Track Package (customised to your requirements): Enhanced cabin structure for
Race Seat Fitment, Surge Tank etc. Fuel Tank, Adj Sway Bars, Shock Upgrade, Tow
 Straps etc. Can be added to a street car (SR) or fitted to a dedicated track car (R).
OPTIONAL MODEL

PACE GT-SU (Street Custom)
Chassis & Body Features. Features such as Custom Bonnet Duct, Twin Fuel
Custom
Filler Recesses, Delete Front Indicator Mounds, Custom Rear Guard Flare Size etc.
$POA
PRICE
$POA
Options & Extras
( Supplied) ( Selected)
Starter Package Options:
 Additional Nostril Panel Vent (Twin Nostril or Single)
$870.00
 Gurney Bubble Matched to Body Colour
$
 Mark Body for Cut Outs including all Lights, Body Accessories etc.
$388.00
 Cut Out Body for all Lights, Body Accessories etc. Does not include Marking.
$396.00
 Choice for Custom Gelcoat Colour for Exterior Panels - Standard Colour is White
$985.00
 Matched Gelcoat Colour for Interior Panels - Standard Colour is Black
$270.00
 Premium Gelcoat Body Finish (Detailed Finish Inside & Outside of all Body Panels)
$3,270.00
 Main Stripe Kit - Choice of Coloured Vinyl, Fully Fitted, Straight, Gulf or Custom
$1,395.00
 Incorporate Roundells to Main Stripe Kit (front and rear)
$655.00
 3M Clear Exterior Rear Wheel Arch Stone Chip Protection
$145.00
 Fitment of Delivery Caster Wheels
$195.00
 Custom Body Features
$POA
 Vertical Lift (Lamborghini Style) Doors Operation
$
 Targa Door Tops
$
 Framed, Hinging and Removable Side Windows
$
 Mirror Polished Bellcranks
$146.00
 Mirror Polished Suspension - Suspension Arms & Uprights
$526.00
Prices / Specifications subject to change without notice. All prices include GST.
PACE GT
Suitable for Full Street Registration & Track Use
Options & Extras
( Supplied) ( Selected)
Roller Add-On Kit Options:
 6-Point Roll Cage Upgrade
$
 Upgrade to Premium CV Boots, Billet Boot Retainers & 12 Point Retaining Bolts
$146.00
 Suspension/Brake Upgrade(350 Rotors/Larger 4 Piston Calipers): Req 17"+ Wheels
$892.00
 Brembo 6 Piston Monoblock Caliper Upgrade for Front (Requires 17”+ Wheels)
$1287.00
 2-Piece Lightweight Full Floating Aluminium Hat Rotor Upgrade Front & Rear
$3496.00
 Upgraded Steering Rack (Reconditioned Steering Rack -> Brand New)
$290.00
 Suspension Upgrade to Urethane Bush
$395.00
 Suspension Upgrade to Urethane Bush with Full Polished Stainless Housings 
$375.00
Upgrade to Double Adjustable Shock Absorbers (Full Car Set)
$1090.00
 Upgrade to 4-Way Adjustable Remote Canister Gas Shock Absorbers (Full Car Set)
$3286.00
 Upgrade to Full Mirror Polish on Shock Absorbers (all four, standard shocks only)
$195.00
 Fully Assemble Starter Kit & Roller Add-On Kit Components (Rolling and Steering)
$2285.00
 Perform Initial Suspension Alignment
$POA
Prices / Specifications subject to change without notice. All prices include GST.
PACE GT
Suitable for Full Street Registration & Track Use
Options & Extras
( Supplied) ( Selected)
Finishing Add-On Kit Options:
 Polished Stainless Gas Struts Upgrade (Bonnet & Boot)
$265.00
 Upgrade to 17" Wheels (Painted or Full Polished Centres)
$1,585.00
 Upgrade to 18" Wheels (Painted or Full Polished Centres)
$
 Billet Brake & Clutch Reservoir Kit (3 x Reservoirs)
$380.00
 Polished Stainless Windscreen Washer Bottle Upgrade (Polished Stainless Bracket)
$95.00
 Aluminised Cloth Insulation for underneath of Rear Clip
$135.00
 Cold Air Intake System for normally aspirated GM & Ford Coyote Engines
$886.00
 Cold Air Intake System for Australian Supercharged Ford Coyote Engines
$
 Intercooler Coolant System for AU Supercharged Coyote (Heat Exch, Intercooler,
$
Tanks, Lines, Fittings)
 Accessory System for NA GM Engine (Alternator, Pulleys, Mounts, Belt etc)
$
 Rotate GM NA Intake 180 degrees (Required for Engine Fitment)
$
 Porsche G50 Flywheel, Clutch, Pressure Plate, Throwout Bearing Kit, Pilot Bearing
$
 Porsche Miscellaneous Parts - Clutch Fork, Guide Tube
$
 Porsche G50 Starter Motor
$
 Accessory System for Normally Aspirated Coyote
$
 Billet Front Pulley Conversion for Ford Windsor 302/351
$
 Reversing Camera
$POA
 Fire Extinguisher (Chrome Finish)
$176
 Keyless Start System Kit
$
 Cross-Over Exhaust Header Upgrade
$
 Stainless Twin Inlet/outlet Muffler
$
 GM Engine Mount Ears (Pair)
$486
 Door Top Eyebrow - Original Style—Pair
$260
 Cold Air Induction Air Filter Kit for AU Supercharged Coyote - Twin Throttle Body
$730
 Filter Boxes with Twin K&N Washable Air Filter Panels for AU Supercharged Coyote
$
 Decorative Carbon Dash Upgrade
$
 Stainless Header Bolt Upgrade (Special Extra Long Bolts for our Thicker Flanges)
$95
 Carpet Set - DIY Black Carpet with UV/Weather Rating, Edged Mats with Heel Pad
 Leather Trimmed Seats
 Leather Trimmed Dash
 Leather Trimmed Door Pockets
 Brake Booster Kit - Special Remote Twin Circuit Booster
 Premium OEM Quality Wiring Loom
Prices / Specifications subject to change without notice. All prices include GST.
PACE GT
Suitable for Full Street Registration & Track Use
Options & Extras
( Supplied) ( Selected)
Finishing Add-On Kit Options:
 Genuine GM Slimline Oil Pan Conversion Kit. Required for Pan to sit above chassis.
$878
 Race Seat Belt Harness Mount Bracket
$
 Badge Fitment Machining - Wheel Centre Cap x 4
$
 Flush Valve Caps Upgrade (recommended 17/18” wheels as valve located outer rim)
$
 GM Oil Temperature/Pressure Sender Adaptor Kit (requires exchange of OFAC)
$
 Interior Insulation - Extra Large Box covers 3.6m2 (39 square feet)
$95
 Front Anti-Roll Bar (ARB) Assembly - Adjustable
$
 Rear Anti-Roll Bar (ARB) Assembly - Adjustable
$
 Gelcoat in 250mml Sample Pot
$85
 Race Aero Package for Street Registered Track Duties - Removable
$
 Additional Matching Clock for Instrument Package
$177
 Additional Matching Boost Gauge: 0 - 30 psi, Fully Programmable, Warning LED etc
$288
 Custom Coloured Gauge Upgrade e.g. white faced etc.
$85
 Super 3-in-one Insulation for Cockpit side of rear wall
$
 Passenger Seat Slider (Custom PACE Unit ADR Complianced for our seats)
$185
 Chrome Housing Upgrade for Rear Reflectors (Pair)
$59
 Track Package (customised to your requirements):
$POA
Chassis Modifications, Race Seats, Surge Tank etc.
Race Fuel Tanks, Adjustable Sway Bars, Shock Upgrade, Tow Straps etc.
 Performance Tyres Direct from Overseas (Please contact us for options)
$POA
Prices / Specifications subject to change without notice. All prices include GST.