Dylusions Paints
Transcription
Dylusions Paints
Last Updated: May 15 2016 Dylusions Paints Your creative life is just about to get more colourful! Dylusions Paints are gorgeous, vibrant acrylic paints from Ranger Ink USA and Dyan Reaveley, creative mind behind the Dylusions product line. These paints complement and coordinate with Dylusions Ink Sprays. They are easily blendable, yet waterproof, and dry quickly to a matte finish! They are perfect for creative journaling, mixed media and more! General information: • • • • • • • • • Dylusions Paints are quick drying and waterproof. They are semi-opaque, can be blended together and dry to a matte finish. Dylusions Paint colours coordinate with Dylusions Ink Spray colours. They can be applied with brushes, blending tools, brayers, baby wipes, fingers and more! Dylusions Paints can be mixed in small amounts to create different colours. They work great with stencils and stamps. You can use Dylusions Paint to stamp with! Dylusions Sprays can be used over the top of Dylusions Paints. If the paint starts to thicken up over time, mix in a little water to create a more fluid paint - Dylusions Paints won’t lose their vibrancy! Tools to have on hand: • • • • • • • • • • • IBT40965 Ink Blending Tool - Mini IBT40972 Ink Blending Tool - Mini Replacement Foams MIS30676 Mister Bottle NSC20677 Non-Stick Craft Sheet 15x18 7156 Paint Brush - Artist Brush Set (7) 9757 Stamp Cleaning Pad 5479 Tools - Brayer MDAD41818 Tools - Palette Knife Kaszazz Stencils Paper towel Baby wipes Kaszazz Pty Ltd | ABN 22 068 137 075 | PO Box 2371 • Port Adelaide • South Australia 5015 | Ph (08) 8244 3220 • Fax (08) 8244 3102 Last Updated: May 15 2016 Dylusions Paint Techniques: Technique tips • • • • Working from the lid of your paint pot allows you to take small amounts of paint at a time. To get the best results when blending, dip the blending tool into the lid and then blend onto the Non-Stick Craft Sheet. This allows the tool to have even coverage and blends off any excess paint. It is always best to start off with less paint than too much! Clean up all your tools as soon as you have finished, do not leave paint to dry on them. Use a 9757 Stamp Cleaning Pad with a little water to scrub your rubber stamps clean. Blending Tools and Stencilling 1. Add a small amount of paint to the blending tool, and then prime the tool by blending it onto a NonStick Craft Sheet to give the tool an even coverage. 2. Then, using a circular motion blend the paint onto your paper. 3. Paint can be added in layers, because they are semi-opaque. Applying one colour over another will create different colours! 4. After applying paint you can then stamp or spray over the top. 5. To get two tones out of one colour apply the first layer of paint very thinly (it may look a little uneven and the blending marks may show, but don’t worry), then go back over the top with a second layer in places. This works well using a stencil on the second layer. Brayering 1. Add a small amount of paint to a Non-Stick Craft Sheet. 2. Spritzing with water can help if you’re using more than one colour and you want them to blend a little. 3. Roll the Brayer over the paint several times until the Brayer has an even coverage of paint. 4. The finished look that you want will determine how much paint to layer on to the Brayer. 5. Roll the Brayer over your project. You can apply the paint haphazardly or in a specific area. 6. Several colours can be layered over each other, or next to each other. 7. After applying paint, you can then stamp and spray over the top! Baby Wipes 1. Dip the baby wipes into the lid of the paint pot picking up a small amount of paint. 2. Then apply the paint to your project by wiping over the area you wish to cover. This will give a more subtle application and the wetness of the wipe allows colours to be easily blended together. 3. This technique is great for large areas! Stamping 1. Apply the paint to the stamp of your choice (using a blending tool primed as explained previously). 2. Paint only needs to be applied in a thin layer to the stamp. If applied too thick it will seep into the recesses of the rubber stamp and the image will bleed out and be fuzzy! 3. Always clean the stamp immediately after use. Using the 9757 Stamp Cleaning Pad is recommended. Paint Brushes 1. Dylusions Paints can be used to paint just like any other acrylic paints. Mix the colours to create different colours and tones. 2. Apply to your project with brushes just as a famous artist would paint a masterpiece! 3. Browse the Kaszazz customer events gallery for workshops that use Dylusions paints. Kaszazz Pty Ltd | ABN 22 068 137 075 | PO Box 2371 • Port Adelaide • South Australia 5015 | Ph (08) 8244 3220 • Fax (08) 8244 3102
Similar documents
Brayer-InformationSheet
bottom. Moving quickly, roll the Brayer upwards until the Tag is covered. The colours will blend together in a great pattern. Add a stamped image over the top for great effect. Stamping with emboss...
More information