Thanksgiving Cornucopia Centerpiece

create. share. inspire.
project page
Thanksgiving Cornucopia Centerpiece
What you’ll need:
Create a personalized Thanksgiving
cornucopia centerpiece with a variety of
Dremel tools this season!
Dremel Moto-Saw™
MS51 Wood & Plastic
Cutting Blade
3000 Variable
Speed Rotary Tool
561 Multi-purpose
Cutting Bit
220-01 WorkStation™
VersaTip™ Butane
Soldering Torch
Other Supplies
•
•
•
•
•
•
•
•
•
•
Tracing Paper
Pencil
1/8” plywood
Stain
Paint brush
Cornucopia
Cornucopia Filler, ie gourds and leaves
Leather
Twine
Sand Paper – If not using MM45
OPTIONAL
60, 120 and 240 Grit
Sand Paper - Wood
Multi-Max™ MM45
MM14 Hook
and Loop Pad
Step-by-step instructions
First, design your plaque’s pattern on a piece of
tracing paper. One idea for the plaque is to add the
initial of your last name to personalize the
centerpiece.
create. share. inspire.
project page
Thanksgiving Cornucopia Centerpiece
Trace the outer shape on 1/8“ thick wood and cut
it out using the Dremel Moto-Saw.
Then, sand and smooth edges with MM30 and the
wood sanding pads. If you do not have an MM30,
rub sand paper around the edges.
After smoothing the wood, stain it to your
preferred color. Keep a piece of old newspaper
under your project to avoid damaging your work
space.
Rub graphite onto the back of the pattern you
designed in step 1. Lay the pattern on the plaque
and transfer pattern to the wood by firmly
pressing the paper against the wood with the side
of a pencil.
create. share. inspire.
project page
Thanksgiving Cornucopia Centerpiece
Use the VersaTip™ to enhance the pattern, using
any of the 7 VersaTip™ accessories.
Using the Dremel 3000 and the Workstation as a
drill press, drill holes at the ends of the wood.
Attach the plaque to the cornucopia with
decorative leather and twine ties. Add gourds and
colorful leaves to the cornucopia for the perfect
Thanksgiving centerpiece.