New Flexsteel® 250 CB-20 Steam Hose takes your

I N D U S T R I A L
F l e x s t e e l
H O S E
®
2 5 0
C B - 2 0
S t e a m
H o s e
New Flexsteel 250 CB-20 Steam Hose
takes your Applications Full Steam Ahead
®
Introducing the premium Flexsteel® 250 CB-20 Steam Hose from the manufacturer
of Goodyear Engineered Products. With enhanced working pressure to burst
factor of 20 to 1, it has TWICE the burst factor rating than standard steam hose*.
*Maximum 10:1 working pressure is standard per Rubber Manufacturers Association, Inc., Hose Handbook Washington, D.C.: THE RUBBER MANUFACTURERS ASSOCIATIONS, INC., 2003.
• Permanently crimped couplings reduces steam leaks,
saving considerable money and energy
In addition to its outstanding working pressure,
the Flexsteel® 250 CB-20 Steam Hose offers
numerous other advantages over competitive
CB (chlorobutyl) steam hose:
• Available with permanently crimped couplings; eliminates
bulky bolt clamps and reduces the potential for injury or
damage from clamps snagging on personnel or property
• Ferrule “bites” into reinforcement wire for electrical
continuity that reduces dangerous static discharge
PARTNER
To learn more go to goodyearep.com/energystar
I N D U S T R I A L
H O S E
F l e x s t e e l
®
2 5 0
C B - 2 0
S t e a m
H o s e
Flexsteel® 250 CB-20
The reliable steam hose that saves money and energy!
APPLICATION:
BRANDING:
Flexsteel 250 CB-20 improves protection for workers handling
hose with its enhanced working pressure to burst ratio (20 to 1)
and by reducing leaks and dangerous electrostatic charge
when used with a crimped fitting. Additionally, the security of
a crimped fitting solution can save as much as $6,200 per
coupling every steam season.*
Continuous brand example: Goodyear
Flexsteel 250 CB-20 Steam 250 psi WP
Drain after using. Made in U.S.A.
®
CONSTRUCTION:
COUPLINGS:
MxM, MxF, MxMS, FxF, FxMS. All female ends must
have low-profile nut or wing nut
NON-STOCK/SIZES:
Tube: Chlorobutyl blended synthetic rubber
Cover: Red Pyrosyn® wrapped finish, pin-pricked
Reinforcement: (2) Braided steel wire
Contact your Goodyear Engineered Products
representative for special production run
minimum requirements
TEMPERATURE:
ORDER CODES:
0ºF to 425ºF (-18ºC to 218ºC)
¾ inch: 539-580-024 (red)
PACKAGING:
Reels, cut lengths, coupled assemblies
Female Wing Nut
Female Wing Nut with
Female NPT Spud
Female Low Profile Nut with
Female NPT Spud
Male NPT Swivel
Available as Male NPT
ID
Nom. ID
Max. WP
Weight
inches
mm
inches
mm
psi
inches
lbs/ft
code
3/4
19.1
1 1/4
31.75
250
1.72
0.59
0.88
* Based on an approximate steam loss of 2.6lbs/min @ $11/1000lbs. steam over a 5 month period. Figures courtesy of CampbellFittings.com.
The GOODYEAR (and Winged Foot Design) trademark is used by Veyance Technologies, Inc. under license from The Goodyear Tire & Rubber Company. Goodyear Engineered Products are manufactured and sourced exclusively
by Veyance Technologies, Inc. or its affiliates. The Flexsteel® trademark is licensed to Veyance Technologies, Inc. by The Goodyear Tire & Rubber Company. ©2008 Veyance Technologies, Inc. All Rights Reserved.
700-821-947-526
goodyearep.com
Aftermarket Parts - Automotive and Commercial Truck, Conveyor Belt Heavyweight and Lightweight, Home and Garden, Hydraulics, Industrial Hose,
Military, Power Transmission Products, Powersports, Rubber Track,
Seawing Offshore Oil Hose
08GHOS049-9/08