MISC3068-03-EE-XX TruLink Hearing Control App User

TruLink Hearing Control
App User Guide
GET CONNECTED
In order to use TruLink™ Hearing Control app, you must first pair your
hearing aids with your iOS device.
IMPORTANT: Before completing the following steps, ensure Bluetooth®
is enabled on your iOS device. Within the Settings menu go to Bluetooth
and toggle to On.
1. Locate, then tap the Settings icon
on your iOS device.
2.Within the Settings menu go to General > Accessibility >
Hearing Aids.
3.While the iOS device searches for the hearing aids, open and close
the battery door on your hearing aids (this puts the hearing aids into
“pairing” mode).
4a.If your name does not appear in the “Devices List” within 5-7 seconds,
tap Accessibility in the upper left corner, then tap Hearing Aids.
4b.You will see your first name and hearing aid (e.g. “Matt Hearing Aids”
or “Matthew H/As” depending on the length of the first name) when
the iOS device first discovers the hearing aids.
5.Tap on the Hearing Aid Name to connect the hearing aids to the
iOS device.
6.You will see two pairing requests (one for each hearing aid). Select
Pair for each request. These requests may be several seconds apart.
7. Pairing is complete.
GENERAL
The TruLink Hearing Control app provides advanced remote control functionality for your Made for
iPhone Hearing Aid(s):
• Control volume for audio that is streamed from the iOS device or picked up by the hearing aid(s).
• Change between memories that have been programmed by your hearing professional.
• Create and modify memories for your unique listening situations.
• Tie memories to a specific location for automatic activation.
The TruLink Hearing Control app contains a help feature to explain the function of each screen. Tap on the
Help icon
to view the ‘Coachmarks’.
Coachmarks
Hearing aid
battery status
Device Settings
iOS device to hearing aid
connection status
Current memory
Memory Shade
Individual right
or left hearing aid
volume adjustment
Slidepad for simultaneous
volume adjustment both
hearing aids
Mute hearing aid
TruLink app
functionality
TruLink offers a widget that is available in the iOS Notification Center. The TruLink widget allows for quick
access to increase/decrease the hearing aid volume, mute the hearing aid or launch the TruLink app.
Widgets can be accessed by swiping down from the top of your screen at any time regardless of what app
you are currently using. The TruLink widget (like all widgets) must first be enabled.
REMOTE SCREEN
STATUS
The Remote screen provides a status icon for the current battery level of
each hearing aid and a status icon to show connection to your iOS device.
HEARING AID VOLUME
Increase/decrease the microphone volume level on your hearing aid(s)
by dragging the volume slider for each side or by sliding your finger on
the slidepad (between the left and right volume sliders) to adjust both
sides simultaneously. Double-tap anywhere on the slidepad to return
your volume to the default setting that was prescribed by your hearing
professional.
MUTE
Tap on the Mute button to mute the microphones on both hearing aids.
Tap again on the Mute button to unmute the hearing aids and return
the volume to the position prior to muting.
MEMORY
The current memory is displayed and can be changed in the memory
shade at the top of the screen.
To change memories, tap on or pull down the memory shade to see
all available memory options. Tap on the name of the memory you
want to use.
The selected memory will be sent to the hearing aid, and the shade
will retract. The new hearing aid memory name will be shown as the
current memory.
MEMORY HUB
To access advanced memory features, tap on or pull down the memory
shade and tap the icon to the right of the memory name. This places you
in the memory hub where you have options to change memory name,
add location triggers, adjust automatic settings for memories, launch
SoundSpace to create custom memories, or delete a memory.
MEMORY NAME
From this field you can edit the name of any TruLink (custom) memory
that you’ve created.
MEMORY LOCATION
The memory location section is used to manage location based memory
changes. If the memory in view is currently selected for automatic memory
change, that will be displayed here. Tapping this section launches into
a map view for placing a geotag which automatically triggers a memory
change whenever you enter/exit that physical location. When entering the
map screen, your current location will be represented by a blue dot in the
center of the map. Tapping the geotag icon in the bottom right will add/
remove a geotag.
Tapping Cancel will ignore all changes made and return to the memory
hub. Tapping Save will keep all changes and return to the memory hub.
AUTOMATIC MEMORIES
The automatic memories section is used to manage automatic memory
changes for phone calls, audio streaming or for travel in vehicles (car).
Tapping this section allows you to select the current memory to be used
for Phone calls, Audio streaming or when traveling in a car. When in the
detailed view, the current memory in use is displayed at the top of the
screen. In each section, the currently selected memory will be shown to
the right of the section label. Example: Phone – (current: None).
To set the current memory to be used for Phone or Audio, tap on the Set
button and then choose the hearing aid microphone reduction setting
to be used when in phone call or streaming audio. Options are: None,
Decreased, or Mute.
To set the current memory to automatically engage when traveling in a
car, tap the On for this memory button.
Tapping Cancel will ignore all changes made and return to the memory
hub. Tapping Save will keep all changes and return to the memory hub.
SOUNDSPACE
Tapping in the SoundSpace™ section launches the SoundSpace tool for
creating customized memory settings. See the SoundSpace Screen section
for details.
DELETE
To delete a memory, tap on the Delete button and confirm that you want
to delete the current memory.
SOUNDSPACE SCREEN
The SoundSpace screen allows you to turn your iOS device into a personal
settings adjustment tool for your hearing aid(s). It provides you the
ability to modify the response for any of your professionally programmed
memories to better suit a particular environment.
Tap on the Start button
to begin using SoundSpace. As you
move your finger around the blank screen, the settings in your hearing
aid(s) will temporarily change so you can listen to a variety of options.
Once you’ve found a spot that sounds good for the current listening
environment, you can tap on the Save button
. Follow the
prompts to save this as a new memory.
To exit SoundSpace without saving a memory, just tap on the Cancel
button
.
MICROPHONE SCREEN
The Microphone screen enables you to use your iOS device as an extra
microphone for receiving, recording, saving and delivering audio directly
to your hearing aid(s). To access the Microphone screen, tap Microphone
on the Remote screen.
REMOTE MICROPHONE
To turn the remote microphone on/off, tap the Power button
on the
Microphone screen. This will start/stop streaming of audio from the iOS
device microphones to the hearing aids.
If the iOS device is already streaming audio and you turn on the remote
microphone, the current audio will stop streaming.
When the remote microphone is on, a blue-colored waveform will show
the current input to the iOS device microphone. A red-colored waveform
will show when input is being recorded.
Blue-colored waveform
RECORD
The remote microphone can record and save audio picked up by your iOS
device. Simply tap on the Record button
, and all audio collected by
your iOS device will be recorded until the Record button is tapped again.
At that point, you will be prompted to name that recording.
You can listen to a saved recording by tapping on the List icon
to
review and select a recording for playback.
From the list view, you can email the recording by tapping on the
Email icon. You can delete a recording by swiping it from right to left
and tapping on the Delete button that appears.
TRULINK MENU
The TruLink menu is accessed from the Remote screen by tapping on the
gear-shaped Settings icon
. The TruLink menu provides a variety of
options including the ability to find a lost hearing aid, adjust TruLink app
settings, get Help, access the User Manual or view information about the
app version number and privacy policies.
FIND MY HEARING AIDS
Find My Hearing Aids is the top left icon on the TruLlink menu labeled
Find. When accessed, it allows you to see the last known geographic
location of your hearing aid(s) on a map view.
•Tap on the Find icon in the TruLink menu.
•The TruLink app will change to a map screen with an icon
indicating the location where your hearing aid(s) was last
connected.
• If the hearing aids are close enough to the phone to be detected,
you can tap on the Search button and you’ll see a gauge to let
you know how close or far away the phone is from the hearing
aid(s). (NOTE: the battery must be in the hearing aid.)
Search view searching
for hearing aids (not yet
connected).
Search view with iOS device
away from hearing aids.
Search view with iOS
device next to hearing aids.
SETTINGS
Settings is the top right icon on the TruLink menu. When opened,
it includes several options.
Option to show Comfort Boost* when turned on will place the Comfort
Boost button on the Remote screen allowing you to turn on/off the
Comfort Boost feature. Comfort boost allows you to aggressively reduce
noise while optimizing sound quality in noisy environments with an ondemand control on the Remote screen.
Demo Mode is an option that allows you to use the TruLink Hearing
Control app without hearing aids connected. Turn on Demo Mode and
then shut down and restart the app. To shut down the app, double click
the Home button and then swipe up on the TruLink app.
Reset App is an option that allows you to reset the TruLink App to the
default settings. This will delete all custom memories and geotags.
Help is the bottom left icon on the TruLink menu and provides you with
specific troubleshooting instruction steps. The troubleshooting tips are
online and will be updated as needed.
Manuals is the bottom right icon on the TruLink menu and provides you
with a user manual that outlines all of the features and functions in the
TruLink app. The manual is based online and will be updated as needed.
APPLE’S IOS CONTROLS
Your iOS device also features controls that allow you to adjust your
hearing instruments without accessing the TruLink Hearing Control app.
With this control you can quickly access the volume adjustment for your
hearing aids without unlocking your iOS device. Just click your iOS
device’s Home button three times for quick access to volume adjustment.
*Important Note: The Comfort Boost feature is available with TruLink 2.0 and updated products. Please consult with your
Hearing Care Professional for updates and more information about Comfort Boost.
Halo and TruLink are compatible with iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPad Air 2, iPad Air, iPad (4th generation), iPad mini 3, iPad mini with Retina display, iPad mini, iPod touch
(5th generation) and Apple Watch. Use of Apple Watch requires iPhone 5 or later. “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed
to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. Apple, the Apple logo, iPhone, iPad and
iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
Bluetooth is a registered trademark of Bluetooth Special Interest Group.
© 2015 Paradigm, Inc. All Rights Reserved. 7/15 MISC3068-04-EE-XX