GreenSmart™ 2 Gas Fireplace Inserts

GreenSmart™ 2 Gas Fireplace Inserts
www.fireplacex.com
1
North America’s Most
Popular Gas Insert Line!
Fireplace Xtrordinair proudly produces our
high-quality line of gas fireplace inserts that
complement a broad range of architectural
styles and heating needs at our manufacturing
plant in Mukilteo, Washington. We utilize the
finest materials and subject them to vigorous
testing standards to make fireplace inserts that
stand up to the rigors of time. These inserts are
the best money can buy. We are proud to be
passionate about the science and the art of
making beautiful fire for your home.
Turn Your Fireplace Into
An Efficient Heat Source
Our GreenSmart™ 2 fireplace inserts are
designed to transform virtually any metal
or masonry fireplace into an efficient source
of heat. Traditional open fireplaces can
have efficiency ratings as low as 15%, and
depending on the condition can actually
draw the heat out of your home for a net
heat loss! Our heater-rated gas inserts
achieve steady state efficiency ratings as
high as 85%.
2
Gas Inserts
Model 430 GSR2 with
the Shadowbox face ,
Traditional Log Set and
Black Painted Fireback
www.fireplacex.com
3
Zone Heating
Unlike a gas furnace that ducts heat to all rooms of your
home, you can use your insert for zone heating. Zone
heating is all about focusing heat where people spend
the most time. By turning down the thermostat on your
furnace and using your gas insert as a supplemental heat
source, it’s easy to save money on home heating bills.
Direct Vent
Our gas inserts are all “direct vent,” meaning they pull
combustion air from the outside of the house and not
your living space. For indoor air quality, safety and
performance, both combustion air and exhaust gases
pass through your existing chimney via a direct vent kit.
Choose The Right Model For You
You have seven models of gas inserts to choose from
depending on your heating needs, fireplace size, and taste.
Consult with your authorized Fireplace Xtrordinair dealer
to verify which insert best suits your home heating
needs. Our dealers are trained, qualified professionals
that can provide expert installation and service on your
new gas insert.
Warranty
Your gas insert is backed by a network of Specialty
Hearth Dealers and certified factory trained installers.
Fireplace Xtrordinair warrants our products to be free
from defects in material and workmanship for a period
of 7 years from the date of purchase. All parts, electronics,
and labor are covered for a full 2 years. No other
manufacturer’s warranty can compare.
4
Gas Inserts
Model 33 DVI with the
Universal Face, Fyre-Stone Kit
and Stainless Steel Fireback
www.fireplacex.com
5
Quality and Beauty
from the Inside Out!
Personalize Your Fire
Our variety of unique face designs and interior
options give your insert a custom appearance
that not only makes a statement in any room, but
makes your fireplace look like it was designed that
was from the beginning.
Choose a Face
Fireplace Xtrordinair offers more high quality,
beautiful face designs that any other company.
With such a wide variety of faces to choose from,
you are sure to find one that complements the
style and décor of any room.
Choose Your Media
You are no longer limited to just one look for
the interior of your insert. Both traditional and
contemporary options are available with all of
our inserts that can completely transition the
look of your fire.
Choose an Interior Fireback
There are several fireback selections to choose
from which provide a dramatic backdrop to the
fire and add visual interest to the space. Pick a
fireback that best complements your face and
media selection.
6
Gas Inserts
Model 34 DVL with Ember-Fyre log set,
Bronze Patina Artisan Face, Handmade
Brick Fireback and custom painted panels.
www.fireplacex.com
7
Model 34 DVL with Ember-Fyre log set,
Black Painted Classic Arch Face,
Herringbone Brick Fireback and
Arched Panels.
8
Gas Inserts
Model 32 DVS with Ember-Fyre
log set, Carbon Patina Wilmington™
Face, Traditional Brick Fireback and
Rectangular Panels.
Model 34 DVL with Ember-Fyre
log set, Black Painted French
Country Face, Straight Brick Fireback and One Piece Panel.
www.fireplacex.com
9
Fully Loaded Deluxe Gas Insert
Models: 32 DVS and 34 DVL
The GreenSmart™2 Deluxe performance series is our
top-selling gas insert line, offering every feature and
convenience possible. This series includes full convection,
built-in fans, Accent Lights, and the GreenSmart™ 2
Wall Mounted Remote, all while boasting the highest
efficiencies and largest turndown ratios of any gas inserts.
This series is the ultimate in comfort and convenience.
GreenSmart 2 Thermostat
Wall Mount Remote Control
Basic Gas Insert
Models: 31DVI and 33 DVI
The DVI series is our basic gas insert line that offers the
same durable construction and large glass viewing area
as the top-selling Deluxe gas inserts, but is perfect for
anyone looking for a simplified operating system with
basic controls and functions. For convenient operation, a
Wall Thermostat, Thermostat Remote Control, or On/Off
Wall Timer are available to choose from.
Scan the QR Code
to watch a video
of the 32 DVS burning.
Wall Thermostat
Basic Thermostat
Remote Control
ON/OFF Wall
Timer
These four models feature a full convection chamber
that is cleverly disguised by our face designs while it
delivers heat throughout the room.
10
Gas Inserts
Scan the QR Code
to watch a video
of the 34 DVL burning.
Model 32 DVL with Ember-Fyre
log set, Black Shadowbox Face
www.fireplacex.com
11
Model 34 DVL with the
Model
34 DVL
Cypress
Facewith
and the
Black Enamel
Fireback.
and one
piece
Architectural
Double
Door
andpanel.
Cypress Face
does
not require panel.
Herringbone
Brick
Fireback.
12
Gas Inserts
Models 31DVI, 33 DVI, 32 DVS & 34 DVL Face Options
Choose from our large selection of high quality face designs in a wide variety of finishes to match virtually any décor.
Complete Face/Panel
These faces do not require Finish Panels
Universal Face
31 DVI/32 DVS Small
23-1/8” H x 37-7/16” W
31 DVI/32 DVS Large
29” H x 40-3/8” W
33 DVI/34 DVL Small
27” H x 40-3/8” W
33 DVI/34 DVL Large
33-1/2” H x 44” W
Faces That Require Panels
Artisan™ Double Door Requires backing plate Architectural™ Rectangular or Arched Double Door Requires backing plate
Backing Plate
Backing Plate
31 DVI/32 DVS Small
23-1/8” H x 37-1/2” W
31 DVI/32 DVS Large
29” H x 40-3/8” W
33 DVI/34 DVL Small
27” H x 40-3/8” W
33 DVI/34 DVL Large
33-1/2” H x 44” W
31 DVI/32 DVS Small
23-1/8” H x 37-1/2 W
31 DVI/32 DVS Large
29” H x 40-3/8” W
33 DVI/34 DVL Small
27” H x 40 -3/8” W
33 DVI/34 DVL Large
33-1/2” H x 44” W
These faces require Finish Panels to complete - see page 15 for details.
Shadowbox™
(shown with one piece finish panel)
31 DVI & 32 DVS
30 1/2” W x 20 13/16” H
33 DVI & 34 DVL
34” W x 24 7/8” H
Black Painted
Classic Arch™
Metropolitan™
31 DVI & 32 DVS
22” H x 30” W
33 DVI & 34 DVL
26 1/2” H x 34 3/4” W
31 DVI & 32 DVS
22” H x 30” W
33 DVI & 34 DVL
26 1/2” H x 34 3/4” W
Black Painted
Black Painted
Bronze Painted
Artisan™
31 DVI & 32 DVS
22” H x 30” W
33 DVI & 34 DVL
26 1/2” H x 34 3/4” W
Black Painted
French Country™
Wilmington™
31 DVI & 32 DVS
22” H x 30” W
33 DVI & 34 DVL
26 1/2” H x 34 3/4” W
31 DVI & 32 DVS
33 7/8”W x 21 1/2” H
33 DVI & 34 DVL
37 5/8”W x 25 7/8” H
Black Painted
Carbon Patina or Black
Painted
(Face design may vary)
Cypress™
31 DVI & 32 DVS
37 1/2”W x 23 1/8” H
33 DVI & 34 DVL
40 1/4”W x 27” H
Brushed Nickel
www.fireplacex.com
Brushed Nickel
Hand-Rubbed
Bronze Patina
Black Painted
(No Panels Required)
13
Models 31DVI, 33 DVI, 32 DVS & 34 DVL Finish Options
Media Options
Fireplace Xtrordinair offers a variety of interior media options so you can completely transition the look of your
insert as well as complement any architectural style. For both the Deluxe and Basic models, choose between the
Traditional Log Set, the Fyre-Stone™ Rock Kit with Glass Media or Driftwood Fire Art™ with Glass Media. The Deluxe
models also come with the choice of the award-winning Ember-Fyre™ burner with a high-definition log set for an
incredibly realistic fire.
High Definition Ember-Fyre™ Log Set
For 32 DVS and 34 DVL Only
(DVS Shown)
Traditional Log Set with Dancing-Fyre™
For All Models
Fyre-Stone™ Rock Kit with Glass
Media For All Models
Driftwood Fire Art™ with Glass Media
For All Models
Firebacks
Choose the perfect fireback to complement your media and provide a backdrop for your fire. Our fireback
selections range from simple and contemporary to decorative, traditional styles.
Handmade Brick Fireback shown with
Traditional Log Set
Common Brick Fireback shown with
Traditional Log Set
Black Enamel Fireback shown with
Driftwood Fire Art and Glass Media
14
Gas Inserts
Herringbone Brick Fireback shown with
Traditional Log Set
Stainless Steel Fireback shown with
Fyre-Stone Rock Kit and Glass Media
Finishing Your Fireplace Insert
Insert panels are used to close off the opening of your fireplace when installing a gas insert. Fireplace Xtrordinair
offers a choice of five looks. Please see page 23 for panel dimensions.
8” x 10” Arched Panel and Trim
Optional Insert Wiring Kit
This option offers the graceful arched
upper panel, which adds a desirable
element to many installations. To ensure
coverage of the fireplace opening,
consideration must be made to account
for the radius of the top panel.
If you do not want the power cord
running across your hearth, use our
optional U.L. approved Fan Wiring
Kit. This kit allows you to hard-wire
the electrical connection within your
existing fireplace for a safe and cord free
installation. Available for all gas inserts.
Rectangular Panel and Trim
The Rectangular Panel system is available
in three sizes and is the most versatile.
Go to the Fireplace Xtrordinair™
Website and Design Your Own
Fireplace Insert
Inside-Fit Panel
You can modify (cut-down) any of the
standard rectangular panels to fit the
inside opening of your fireplace.
Lower Zero Clearance Panel and Trim
Designed to be used with Rectangular
Panel systems, this lower panel offers a
finished appearance to your installation
when the existing fireplace opening is
elevated above the floor. This panel can
be cut to size and will cover up to 7” below
the insert.
Bottom Panel and Trim Only
One-Piece Panels
The one-piece panel is flat, has no trim,
or seams and does not require a hearth
extension for a very clean look. This panel
requires approximately 1” more depth,
height and width to your fireplace opening
for the insert to fit. See your Owner’s Manual
for details. 3 and 4 sided custom panels are
also available.
www.fireplacex.com
Customize the right insert for you. www.
fireplacex.com has a wide selection of
premium quality gas, wood and electric
fireplaces and fireplace inserts – each
custom-crafted with an eye for detail. But
what’s going to work in your house?
The Fireplace Xtrordinair Fire Designer
can help you customize your insert with
an easy and fun website that helps you
choose the right insert for the right space
and for the right look.
Print the specifications of the insert
you’ve designed and take them into
any of the more than 1,200 Fireplace
Xtrordinair dealers worldwide for pricing,
installation and more.
15
430, 616 & 616 Diamond-Fyre™: Traditional Hearth Fireplace Inserts
The Traditional Hearth Series showcases a very large viewing area that is second to none. A traditional
hearth look is achieved by having our ceramic glass go almost all the way to the bottom of the
unit and hearth. These gas inserts convert an existing masonry or metal fireplace into an efficient
heater while preserving the charm of a traditional fireplace.
The Traditional Hearth Series is designed to fit most
fireplace openings. Having the controls located
laterally allows for an almost 20% increase in glass
viewing area.
The Traditional Hearth Series comes complete with
fans, 3 Accent Lights (top and back), a burner and the
GreenSmart 2 Wall Mounted Remote. The Comfort
Control™ allows the middle and front burner to operate
independently of the rear burner for maximum flame
turndown.
*Not available on the 616 Diamond-Fyre.
Face Options
Universal Face
Model 430 Face Dim: 31-7/8” W x 22-3/4” H
Model 430 Glass Area: 23” W x16 ” H
Model 616 Face Dim: 35-1/2” W x 25-5/8” H
Model 616 Glass Area: 27” W x 19-3/4” H
Wilmington Face in Black Paint or Carbon Patina
Model 430 Face Dim: 31-7/8” W x 22-3/4” H
Model 430 Glass Area: 23” W x16 ” H
Model 616 Face Dim: 35-1/2” W x 25-5/8” H
Model 616 Glass Area: 27” W x 19-3/4 H
Metropolitan Face
Model 430 Face Dim: 31-1/4” W x 22-1/2” H
Model 430 Glass Area: 23” W x16 ” H
Model 616 Face Dim: 35-1/2” W x 25-5/8” H
Model 616 Glass Area: 27” W x 19-3/4” H
Shadowbox Face - Black
Model 430 Face Dim: 32” W x 21-7/8” H
Model 430 Glass Area: 23” W x16 ” H
Model 616 Face Dim: 35-1/2” W x 24-5/8” H
Model 616 Glass Area: 27” W x 18-5/8” H
Shadowbox Face - Bronze
Model 430 Face Dim: 32” W x 21-7/8” H
Model 430 Glass Area: 23” W x16 ” H
Model 616 Face Dim: 35-1/2” W x 24-5/8” H
Model 616 Glass Area: 27” W x 18-5/8” H
16
Gas Inserts
Model 616 Diamond-Fyre with the
Metropolitan Face, Black Painted
Fireback and One-Piece Panel.
www.fireplacex.com
Scan the QR Code
to watch a video
of the 616 burning.
17
Media Options
Transitional interior media options allow you to give your 616 or 430 insert a whole new appearance. The
highly detailed Traditional Log Set offers a timeless look, while Driftwood Fire Art™ transforms the appearance
of your fire completely to a more modern style. The 616 Diamond-Fyre™ features the most contemporary
media, with a bed of reflective crushed glass in three colors to choose from.
Traditional Log Set
Driftwood Fire Art
Glass Media
Model 616 DF ONLY
Fyre-Stone Rock Kit
Model 616 ONLY
Platinum
Media
Fireback Options
Bronze
Media
Cobalt
Media
Choose the perfect fireback to complement your media and provide a backdrop for your fire. Our fireback
selections range from simple and contemporary to decorative, traditional styles.
Standard Black Painted Fireback
shown with Fyre-Stone kit
Straight Brick Fireback shown
with Traditional Log Set
Herringbone Brick Fireback shown
with Traditional Log Set
Handmade Brick Fireback shown
with Traditional Log Set
Black Enamel Fireback shown with
Driftwood Fire Art
Stainless Steel Fireback shown with
Fyre-Stone Rock Kit
18
Gas Inserts
One-Piece Finish Panels
One-piece panels are available for the 616 and 430 and come
in two sizes.
Model 616
30-1/2” H x 42” W
34” H x 44” W
Model 430
25” H x 38” W
28” H x 40” W
Custom panel sizes are available through your Fireplace
Xtrordinair dealer.
Insert Wiring Kit Option
If you do not want the power cord running across your hearth use
our optional U. L. approved Fan Wiring Kit. This kit allows you to
hard-wire the electrical connection within your existing fireplace
for a safe and cord free installation. Available for all gas inserts.
Use your smart
phone or tablet to
watch a video of the
430 in action.
www.fireplacex.com
Model 430 with Wilmington
Carbon Patina Face and
Driftwood log set
19
Amazing GreenSmart™ 2 Features
Comfort Control™ (Featured on All Models Except the 616 Diamond-Fyre)
With the push of a button, Comfort Control™ will turn off the rear burner while leaving the front burner on for an
attractive flame appearance when less heat output is desired. This feature not only ensures your comfort, but does not
waste energy when less heat is desired. Comfort Control™ offers the ultimate in heating flexibility and allows you to
enjoy your fire year-round.
Accent Lights (Featured on Deluxe and Traditional Hearth Models)
Accent Lights add a warm glow to the interior of the
firebox and can be used whether the fire is on or off.
These Accent Lights serve as a perfect nightlight or
soft, indirect light for the room and allow for visual
enhancement of your insert 365 days a year.
Accent Light Off
Accent Light On
Multi-Function Wireless Thermostat Remote Control
Choice of Pilot Modes
(Featured on Deluxe and
Traditional Hearth Models)
(Featured On All Models)
Easily Switch Between Pilot Modes.
Functions of the Remote:
• Thermostat
• Flame Adjustment
• Fan Operation
• Accent Light Control
• Comfort Control™
• GreenSmart™ 2 /CPI Pilots
GreenSmart™ 2: Use this mode during the summer
or on days when mild heat is desired to reduce gas
consumption from the Pilot.
CPI-Continuous Pilot: Use Continuous Pilot during
the fall and winter months or in cold climate areas
where more heat is desired. This mode keeps the
Pilot on at all times and warms the vent system to
maintain a strong draft in the chimney and reduce
moisture condensation on the glass.
Control Settings
Flame
Adjustment
Adjusts the
height/heat of
the flame as
you desire. 6 levels of
flame height to choose
from. Not used while in
Smart Thermostat setting.
20
Convection Fans
Twin 90 CFM fans
circulate room
air around the
firebox and deliver
heated air into your home.
6 speeds to choose from.
Accent Lights
Create a warm glow to highlight
the fireplace
interior. Use
year-round to add ambiance.
6 levels to choose from.
Manual
Setting
Thermostat
Setting
Smart Thermostat
Setting
ON/OFF
Fire and fan stay
where you manually
set it.
Fireplace turns ON or
OFF to maintain your
desired home/room
temperature.
Fire height will
adjust automatically
(up or down or OFF) to
better maintain your
temperature setting.
A greener way to heat.
Gas Inserts
Comfort Control™
Turns off the back burner
which lowers the BTU
input. Allows you to burn
less gas on milder days
when you want to enjoy a fire and not
overheat your living area.
Not applicable to the 564
Diamond-Fyre model.
Use mobile device to
watch a video of how
this GreenSmart™ 2
remote works.
Model 616 DF, Bronze Glass Media
Bronze Shadowbox Face and
Black Enamel Fireback.
www.fireplacex.com
21
Installing An Efficient Gas Fireplace Insert
In Your Metal or Masonry Fireplace
1 The first step is determining whether you have a metal (zero clearance) or masonry fireplace and which insert will fit into your
fireplace. Your Fireplace Xtrordinair Design Center Professional can provide assistance if you need it. They will also provide you
with your new air intake system and exhaust vent liners. It is important that this work is done by a hearth professional.
2 Next, determine which insert is best for your home based on fireplace size and your heating requirements.
Minimum Fireplace Requirements Per Model
B
B - Width
A - Height
3-Piece
Panel Type
A
D - Hearth Ext.
1-Piece 3-Piece* 1-Piece 3-Piece
1-Piece
31DVS/32DVS
19-1/2” 20-5/8”
26-1/2” 29”
15-1/8” 16-3/8”
1-1/4”
0
33DVI/34DVL
23-3/4” 24-7/8”
31-1/2” 32-1/2”
14-1/2” 15-3/4”
1-1/4”
0
430
20-1/4”
30-1/2”
1-3/4”
616/616DF
24-1/4”
35”
C
D
1-Piece 3-Piece
C - Depth
15-1/2”
16-1/2”
12”
* Insert sits 1-1/4” further onto hearth
3
Choose your preferred style of insert panel. (Custom fit 3 and 4 sided panels are also available).
4 Select a face design and optional firebrick and you are ready to enjoy your new efficient gas insert by Fireplace Xtrordinair!
If you do not want the fan power cord running across your hearth, consider using the optional Fan Wiring Kit which allows you
to hard wire the fan’s electrical connection within your existing fireplace.
1
2
3
Existing Masonry
or Zero Clearance
Metal Fireplace
Select a Fireplace
Insert
Choose Size and
Type of Panel
4
Add Your Face
Selection
Direct Vent Kit
Looking for a clean look to finish off the top
of your chimney after your insert is installed?
Fireplace Xtrordinair offers a decorative
direct vent “Mission-Style” chimney cap and
30’ liner kit for your new gas insert.
22
Gas Inserts
For Models 31 DVI, 32 DVS and 430
Part No. 96200330
For Model 33 DVI, 34 DVL and 616 and 616 DF
Part No. 96200331
Fireplace Inserts
Specifications
Steady State Efficiency Up To (High)
Steady State Efficiency determined using maximum venting as
tested under DOE 10 CFR part 430, Subpart B, Appendix 0.
Canada Energuide Efficiency
FE Efficiency determined using CSA P4.1-02.
AFUE
Clearances To Combustibles
1 = Floor to Mantle
2 = Floor to Top Facing
3 = Insert to Sidewall
4 = Insert to Side Facing
5 = Extension onto Hearth
6 = Hearth Dimensions
3
430
616 and 616 DF
19-1/2” (495mm)
26-1/2” (673mm)
18” (457mm)
15-1/8” (384mm)
3” Exhaust - 3” Air Intake
115 lbs.
24-1/4” W x 12-3/4” H
352.5 sq. in.
180 CFM
23-3/4” (603mm)
31-1/2” (800mm)
20” (508mm)
14-1/2” (368mm)
4” Exhaust - 3” Air Intake
135 lbs.
27-3/4”W x 17” H
518.38 sq. in.
180 CFM
20-1/4” (515mm)
30-1/2” (775mm)
21” (534mm)
15-1/2” (394mm)”
3” Exhaust - 3” Air Intake
106 lbs.
23” W x 16” H
430 sq. in.
180 CFM
23-5/16” (592mm)
34” (864mm)
24” (610mm)
16” (406mm)
4” Exhaust - 3” Air Intake
133 lbs.
27-1/2” W x 19-3/4” H
616 sq. in.
180 CFM
*Heating Capacity can be affected by negative pressure in the home and by prevailing atmospheric conditions.
Contact local building or fire officials about restrictions and installation requirements in your area.
Heating Capacity*
BTU Input (NG)
BTU Input (LP)
33 DVI and 34 DVL
The dimensions and clearances on this page are for reference only. Refer to the Owner’s Manual prior to installation.
Height
Width in Front
Width in Back
Depth
Flex Vent Diameter
Unit Weight
Glass Size
(viewing glass will vary slightly with face design)
Powerful Convection Fans
Performance
31 DVI and 32 DVS
Up to 1,500 square feet
31,000 (high) - 10,700 (low)
31,000 (high) - 12,600 (low)
31 DVI
32 DVS
81.9% (NG)
82.64 (NG)
84.33 (LP)
86.13 (LP)
Up to 2,000 square feet
40,000 (high) - 11,900 (low)
40,000 (high) - 7,400 (low)
33 DVI
34 DVS
78.66% (NG) 82.71% (NG)
73.44% (LP) 82.61% (LP)
Up to 1,500 Sq. Ft.
31,000 (high) - 11,241 (low)
Up to 2,000 Sq. Ft.
39,000 (high) - 14,835 (low)
31,000 (high) - 7,702 (low)
76.3% (NG)
79.23% (LP)
39,000 (high) - 11,872 (low)
616
616 DF
77.3% (NG)
76.7% (NG)
79.23% (LP) 79.07% (LP)
70% (NG)
72.35% (LP)
67.8% (NG)
75.3% (LP)
70.05% (NG)
70.23% (LP)
69.5% (NG)
69.9% (LP)
65.29% (NG)
67.56% (LP)
68.8% (NG)
67.2% (LP)
64.38% (NG)
66.52% (LP)
69.1% (NG)
69.8% (LP)
71.08% (NG)
73.73% (LP)
75.4% (NG)
76.2% (LP)
1 = 35”* (889mm)
2 = 35” (889mm)
3 = 4-1/2” (114mm)
4 = 4-1/2” (114mm)
5 = 1-1/4”** (32mm)
6 = 0”
Note:
1 & 2 - measured from floor.
3 & 4 - measured from side of unit.
**0” If used with one piece panel
2
64.75% (NG)
66.34% (LP)
68.8% (NG)
67.2% (LP)
Installation information is available at your local Fireplace Xtrordinair dealer or online at www.fireplacex.com
* Maximum 12” mantle depth
1
72.83% (NG)
73.74% (LP)
77.3% (NG)
79.4% (LP)
1 = 35-1/2”* (902mm)
2 = 35-1/2” (902mm)
3 = 4” (102mm)
4 = 4” (102mm)
5 = 1-1/4”** (32mm)
6 = 0”
1 = 36-1/2”* (927mm)
2 = 35-1/2” (902mm)
3 = 6” (152mm)
4 = 5” (102mm)
5 = 0”
6 = 12” (305mm)
Note:
1 & 2 - measured from floor.
3 & 4 - measured from side of unit.
* Maximum 12”
mantle depth
1 = 36-1/2”* (927mm)
2 = 35-1/2” (902mm)
3 = 6” (152mm)
4 = 5” (102mm)
5 = 0”
6 = 12” (305mm)
* Maximum 12”
Mantle depth
* Maximum 12” mantle depth
**0” If used with one piece panel
4
6
Panel Sizes
5
Measurements for each panel is for maximum fireplace opening coverage - Panels not used on Architectural and Universal Faces.
3 and 4 sided Custom Fit Panels are available from your Fireplace Xtrordianir dealer.
Arched 8” sides x 10” top
Rectangular 4” sides x 6” top
Rectangular 8” sides x 10” top
Rectangular 10” sides x 13” top
(all can be trimmed for inside fit of fireplace opening)
One Piece Small
One Piece Large
40-3/8” w x 23-1/2” h, side
40-3/8” w x 28-7/8” h top
37-1/8” w x 25” h
40-3/8” w x 28-7/8” h
44-3/8” w x 31-7/8” h
44-3/16” w x 28-1/4” h side
44-3/16” w x 33-3/8” h top
40” w x 29” h
44-3/16” w x 33-3/8” h
48-3/16” w x 36-3/8” h
38” w x 25” h
40” w x 28-1/2” h
42” w x 30-1/2” h
44” w x 34” h
38” w x 25” h
40” w x 28” h
42” w x 30 1/2” h
44” w x 34” h
Tested and Certified by to ANSI Z21-88a-2009, applicable sections of UL307b-1995
Note: Improper installation of your gas appliance or failure to operate it in accordance to the guidelines detailed in the Owner’s Manual may negate your warranty and
endanger your home and family. Installation information is available on our website at www.fireplacex.com.
We recommend all Fireplace Xtrordinair appliances be installed and maintained on an annual basis by your Specialty Hearth Retailer.
www.fireplacex.com
23
Take the time to educate young children about the dangers of fire and the hot surface
temperatures of glass and metal surrounding the fireplace insert. Consider installing a fire
screen; make sure it’s tall enough so that children can’t climb over it, and that it’s placed far
enough away so that reaching arms can’t touch the surfaces of the insert. A few precautions
such as these will allow everyone in your home to safely enjoy the comfort and warmth of your
new gas fireplace insert.
Additional Fireplace Xtrordinair Products
If you are in the market for other hearth products, Fireplace Xtrordinair manufactures a full line of wood, gas and
electric fireplaces and electric and wood burning fireplace inserts.
Wood Burning Inserts
Electric Linear Fireplaces
High Quality Construction
Electric Linear Fireplaces
Both Flush Wood Hybrid-Fyre® insert’s are constructed from the highest quality materials at our state-of-the-art factory located in Mukilteo,
Washington. From heavy gauge steel to real masonry brick, along with a stainless steel baffle and air tubes, you can see the difference in performance
and quality. Our Flush Wood Hybrid-Fyre® inserts are built with long-lasting value and Fireplace Xtrordinair’s “Real World” Seven Year Warranty.
The Fireplace Xtrordinair Electric
Fireplaces offer the convenience of
adding a fireplace to any room within
your home. With no venting required,
installation can be completed in as
little as one hour.
They offer a selection of finish faces to
match any home decor.
Flush Wood Hybrid-Fyre® Inserts
Installation Specifications Always refer to the and use the Installation Manual for complete install information.
We suggest that you have an authorized Fireplace Xtrordinair dealer install your fireplace insert. If you install the fireplace insert yourself,
your authorized dealer should review your installation plans.
The both Flush Wood Hybrid-Fyre® Insert’s are designed for installation in masonry fireplaces and factory-built metal (Z.C.) fireplace.
Check with your local building officials for any permits required for installation of this fireplace insert and notify your insurance company
before proceeding with installation.
The both Flush Wood Hybrid-Fyre Insert’s must be installed with a Positive Flue (full chimney reline). See Owner’s Manual for details.
Minimum Fireplace Requirements
A - Height (Front)
B - Height (Rear)
C - Width (Front)
with GreenStart™ Igniter
D - Width (Rear)
E - Depth
F - Hearth Depth*
G - Hearth Width
Large Flush Wood
Small Flush Wood
23-1/2” (597mm)
22” (559mm)
33” (839mm)
19” (483mm)
19” (483mm)
27”* (686mm)
B
A
(includes 2” for power cord)
(includes 2” for power cord)
34-3/4” (883mm)
40” (1016mm)
19-1/4” (486mm)
14” (356mm)
17-1/2” (446mm) USA
19-1/2” (495mm) Canada
40-3/4” (1036mm)
20-3/4” (528mm)
19” (483mm)
18” (458mm)
47” (1093mm)
D
C
5” deep from front opening
3” deep from front opening
E
G
F
* See Owner’s Manual for complete hearth and R Value requirements
Minimum Clearances to Combustibles
Large Flush Wood
Small Flush Wood
K - Sidewall To Insert
L - Side To Facing
M - Top Facing
N - Mantle
O - Hearth Side*
P - Hearth Depth*
10-1/2” (267mm)
5-1/2” (140mm)
37” (940mm)
41” (1042mm)
8” (204mm)
18” (458mm)
R - Mantel Breastplate
S - Mantel Column
T - Extension on Hearth
Q - Any Room Combustible
37” (940mm)
5-1/2” (140mm)
0”
36” (915mm)
11-5/8” (296mm)
6-1/4” (159mm)
37-1/2” (953mm)
37-1/2” (953mm)
8” (204mm)
16” (406mm) USA
18” (458mm) Canada
37-1/2” (953mm)
6-1/8” (156mm)
1-1/2” (39mm)
36” (915mm)
* See Owner’s Manual for complete hearth clearances
K
N
CLEANEST
BURNING
WOOD INSERTS
IN THE
WORLD
R
S
P
M
T
L
Q
Testing
O
Tested and certified by Intertek Laboratories Inc. Report #500346479PRT-001 Safety Tested to U. L. 1482 and ULC S628-1993
Fireplace Xtrordinair offers two flush
to the fireplace wood burning inserts.
The 33 Elite Plus and the Large Flush
Wood Hybrid-Fyre® inserts that feature
a super clean burn, high efficiency
and the revolutionary GreenStart™
automatic wood igniter.
See our complete line of fireplaces
Visit us online: www.fireplacex.com
www.fireplacex.com
GreenSmart™ 2 Gas Fireplaces
Flush
Hybrid-Fyre®
Photos
andWood
illustrations
are for descriptiveInserts
purposes only. We reserve the right to improve or change our products without prior notification.
Hybrid-Fyre™ and all other trademarks belong to Travis Industries, inc. Consult the Owner’s Manual for complete installation requirements.
© Copyright T. I. 03/2014
Printed in the U. S. A.
www.fireplacex.com
98800725
Gas Fireplaces
Tempest Torch™
Fireplace Xtrordinair offers a complete
line of heater rated gas fireplaces in
both landscape and portrait-style
designs. There are Fireplace
Xtrordinair gas fireplaces in many
The Tempest Torch outdoor gas
lamp is designed to create the
ultimate in lighting enhancement.
The patent pending Tempest Torch
creates a natural venturi effect
causing the flame to spiral and
dance within the tempered glass
walls without the use of electricity.
sizes and for every heating need.
www.fireplacex.com
Linear Gas Fireplaces
For the ultimate in contemporary
design Fireplace Xtrordinair offers
a range of high performance linear
gas fireplaces that feature 36, 44 and
60 inch wide fire viewing area and a
unique Fire Sculpture™ interior art.
See our complete line of fireplaces
Visit us online: www.fireplacex.com
Photos and illustrations are for descriptive purposes only. We reserve the right to improve or change our products without prior notification. Trademarks
Gas Inserts
24
belong to Travis Industries, inc. Consult the Owner’s Manual available on the www.fireplacex.com website for complete installation requirements.
© Copyright T. I. 08/14 - Printed in the U. S. A. - 98800585