docr - The 2mm Scale Association
download 
Report Transcription
r - The 2mm Scale Association
The 2mm Scale Association Loco Chassis Kits, etch reference drawing and general arrangements. BR Class 03/04 Diesel, for Bachmann-Farish body BR Class 08 Diesel, for Bachmann-Farish body GWR 14xx, for Dapol body GWR 2251, for Peco body GWR 57xx, for Farish body LMS 4F 0-6-0, for Raithby etched body LMS Jinty, for Farish body LNER J94, for Farish body LNER J39, for Farish body SR AIX (Terrier) for Dapol body SR M7 for Dapol body Bachmann etched replacement 03/04 chassis etch Crank overlays Frame assembly jig Inside frames The 2mm Scale Association BR Class 03/04 Shunter Bachmann replacement chassis Class 03 Balance weights Class 04 Balance weights 3-680 30:1 Foldup gearbox Brakeblocks Foldup coupling rods Bachmann etched replacement 03/04 chassis arrangement 30:1 worm drive from 8mm motor in bonnet Rear spacer below cab length 4.4mm 14:14 spur gear Brakeblock drive to rear axle holes Simpson springing hole Front spacer below nose length 4.4mm Bachmann etched replacement 08 chassis etch Outside frames with foldup axleboxes Foldup coupling rods Balance weights Brakeblocks Frame assembly jig Outside cranks Inside frames Foldup gearbox 32 30:1 The 2mm Scale Association BR Class 08 Shunter Bachmann replacement chassis 3-681 Front bufferbeam Rear bufferbeam Front bufferbeam overlay Bufferbeam stays Front steps Rear bufferbeam overlay Brake rigging Cab steps Bachmann etched replacement 08 chassis arrangement Fold out to form mounting holes to body and outside frame locations Central spacers above wheels and gears length 5mm 30:1 worm drive from 10mm motor in bonnet Fold in to locate frame spacers Fold in to locate frame spacers Mounting point for front tanks Front spacer Simpson springing hole below nose length 9.5mm Brakeblock holes 14:18 spur gear double reduction drive to rear axle Rear spacer below cab Length 9mm Fold out to form mounting holes to body and outside frame locations Dapol etched replacement GWR 14XX chassis etch Foldup gearbox Frame assembly jig Inside frames The 2mm Scale Associaition Balance weights Dapol 14XX Autotank replacement chassis Foldup coupling rods 30:1 Bufferbeam overlays 3-620 Brakeblocks Outside frames for rear axle Dapol 14XX Autotank replacement chassis Brake rod Dapol etched replacement 14XX chassis arrangement 30:1 worm drive from 8mm motor in cab Simpson springing hole Front spacer below smokebox saddle length 5mm Central spacer (vertical) length 3.75mm Brakeblock hole 14:16 spur gear drive to centre axle Slot for outside frame Rear spacer below cab length 5mm Fold outwards to support outside frame Peco etched replacement GWR 2251 chassis etch Foldup gearbox Frame assembly jig Foldup coupling rods 30:1 Inside frames Peco 2251 Brakeblocks Bufferbeam overlay The 2mm Scale Association 3-622 Peco 2251 replacement chassis Peco etched replacement 2251 chassis arrangement 30:1 worm drive from tender concealed in firebox Simpson springing hole Brakeblock hole 2mm hole for spigot drilled through spacer Front spacer below smokebox saddle length 5mm Central spacer (vertical) length 3.75mm 14:22 spur gear drive to rear axle Rear spacer below cab length 4mm Farish etched replacement GWR 57XX chassis etch Inside frames Balance weights Frame assembly jig Foldup coupling rods Bachmann 57XX Pannier 30:1 Foldup gearbox Bufferbeam overlays Masterclass Models N Bachmann 57XX Pannier replacement chassis Brake rods Brakeblocks 3-621 Farish etched replacement 57XX chassis arrangement 30:1 worm drive from 10mm motor in firebox/cab Brakeblock hole Simpson springing hole Front spacer below smokebox length 4.25mm 14:18 spur gear Central spacer drive to centre axle length 5mm Rear spacer below cab length 5mm 2mm etched replacement LMS 4F chassis etch Frame assembly jig Sandboxes Balance weights 30:1 The 2mm SA 2mm LMS 4F replacement chassis Inside frames Foldup gearbox Frame assembly jig 2mm LMS Johnson/Fowler tender replacement chassis LMS Johnson/Fowler tender replacement chassis 3-651 Brake mounts Brakeblocks Tender Brakeblocks Foldup coupling rods Front Sandboxes 2mm etched replacement LMS 4F chassis arrangement 30:1 worm drive from tender concealed in firebox Simpson springing hole Front spacer below smokebox saddle length 5mm Slots for sandbox Brakeblock hole Central spacer (vertical) length 3.5mm 14:18 spur gear Slot for drive to rear axle brake bracket Rear spacer below cab length 4mm Farish etched replacement LMS 3F Jinty chassis etch Inside frames Frame assembly jig Sandboxes Foldup coupling rods 30:1 Foldup gearbox Bachmann LMS 3F Jinty replacement chassis The 2mm Scale Association Bachmann LMS 3F Jinty replacement chassis 3-650 Brake rods Brakeblocks Balance weights Farish etched replacement LMS Jinty chassis arrangem 30:1 worm drive from 8mm or 10mm motor in firebox/cab Brakeblock hole Front spacer below smokebox length 5mm Simpson springing holes 14:18 spur gear drive to centre axle Central spacer length 5mm Slots for sandbox Rear spacer below bunker length 7mm Farish etched replacement Hunslet Austerity/J94 chassis etch Footplate strengtheners (not for Farish body) Inside frames Balance weights Frame assembly jig Balance weights Brake rods 30:1 The 2mm Scale Association Bachmann J94/Hunslet replacement chassis Foldup coupling rods Foldup gearbox Brakeblocks 3-640 Sandboxes Bufferbeam strengtheners Bufferbeam overlays Farish etched replacement Austerity/J94 chassis arrangement 30:1 worm drive from 8mm motor in boiler Slots for sandbox Rear spacer below cab length 9.5mm Optional spacer if coupling pocket removed length 7.5mm Slot for footplate bracket Slot for bufferbeam bracket 14:18 spur gear drive to rear axle Simpson springing holes Brakeblock hole Front spacer below smokebox length 5mm Bachmann etched replacement LNER J39 chassis Frames Inside frame strengtheners The 2mm Scale Association Farish J39 replacement chassis 30:1 Foldup gearbox Frame assembly jig Brakeblocks Balance weights 3-641 Foldup coupling rods Steps Footplate Farish LNER 4200 gallon tender chassis Inside frame strengtheners Functional Frames Brakeblocks Cosmetic outside frames Bachmann LNER J39 chassis arrangement 30:1 worm drive from tender concealed in firebox Simpson springing Brakeblock hole hole Central spacer (vertical) length 5.5mm Front spacer below smokebox saddle length 5mm Front spacer 4.5mm long Simpson springing hole 14:22 M0.4 or 16:32 M03 spur gear drive to rear axle Brakeblock mounting holes Rear spacer 4mm long Rear spacer below cab length 6mm Dapol etched replacement A1X Terrier chassis Balance weights Frames Frame assembly jig Brakeblocks The 2mm Scale Association Dapol Terrier replacement chassis Dapol Terrier 3-661 Foldup coupling rods Brake rodding Inside frame strengtheners Dapol A1X Terrier chassis arrangement 30:1 worm drive from 8mm motor in tanks Brakeblock hole Front spacer below smokebox length 6mm 14:22 M0.3 spur gear drive to front axle Simpson Rear spacer Central spacer springing below cab length 8mm length 8.5mm hole Dapol etched replacement LSWR M7 chassis Inside frame strengtheners Brake rodding Balance weights Brakeblocks Frames Frames Foldup coupling rods The 2mm Scale Association Dapol M7 replacement chassis 3-660 Dapol M7 replacement chassis Trailing axle bearing if building as 0-4-2-2T Cut bogie here if building as 0-4-2-2T Frame assembly jig Bogie Dapol LSWR M7 chassis arrangement 30:1 worm drive from motor in tanks Simpson springing hole Front spacer below smokebox saddle length 6mm Brakeblock hole Middle spacer 14:28 M0.3 length 14mm drive to fromt axle Trailing axle bearing if building as 0-4-2-2T Rear spacer below cab length 10mm Alternative bogie mounting points
