Untitled - Farmer Boy Ag

(800) 845-3374
www.FarmerBoyAg.com
Medicators
HN55
“The Original Diaphragm Medicator”
Accurate and dependable injection. The HN55 is a proportional liquid chemical
injector that injects a precise amount of chemical in proportion to a volume of
water. The HN55 runs off of water flow, rather than electricity. The HN55 can
run off of water flows as low as one gallon per hour, and will work with gravity
via a water drop of as little as 5 feet!
• Water powered, no electricity needed!
• Chemilizer injectors are immune to electrical surge and power failure.
The water powered motor works even when your lights are not!
• Wide range of water flow rates: .02 - 11 GPM
• Corrosion Resistant Construction - silicone and viton components available
to withstand your most aggressive chemicals
• Resistant to wear and tear; the chemical is injected after the motor
preventing chemical contact with critical motor parts
• Durable and rugged performance
• Simple to install, quick and easy maintenance
• 2 year manufacturer’s motor warranty
• The Chemical Pump is not covered under warranty.
Chemilizer Improvements:
• Improved Low Flow Performance
• More accurate over a wider range of applications
• More durable to reduce downtime and service costs
• Pump O-Ring - increased resistance to a broader range of medications and line cleaners
• New Kynar Sleeve - high chemical resistance and longer lasting
Valve Changes:
• Bore Diameter, O-Ring seats and valve lengths
By-Pass Arm and Piston Guide Bushing:
• Extends the life of linkages and tension bands
• Reduces downtime and service costs
• New material decreases wear on the bushing which increases the life of the
piston guides
Don't Forget Your
Agitator Pump!
See
Page
186
Item No.
Description
Price
12040023
HN55 1:128
209.09
181
Your Best in VALUE and CUSTOMER SUPPORT
Medicators
HN55 Medicator Parts Breakdown
FG8023
10095092
Item No.
Vendor #
Description
Price
12050270
12050221
12050227
12050228
12050229
*FG5003
*FG9927
*FG5040
*FG5042
*FG5043
*FG8013
*FG8015
*FG8016
*FG8017
*FG8019
*FG8020
*FG8023
*F11010
10095067
10095058
*F12232
10095053
10095054
31-03130-1032
641755
10095092
10095078
10097374
Diaphragm
Hose Chemical Assembly
MPDI050 Inlet/ Outlet Valve Assembly
Pivot Arm Assembly
Actuator Arm Assembly
Top Cap Assembly
Main Top Body Assembly
Housing Bottom Cap
Top By Pass Assembly
Inlet Tee
Outlet Tee
Twist Vent Cap
Jaco Elbow ¼"
O-ring
O-ring (inlet/outlet vls)
Tension Band
O-ring (inlet/outlet tees)
O-rings
S.S. Nut
Screw 8 x ½"
Stainless Steel Screw
Piston Clip
Kynar Sleeve 1% ratio
59.30
7.35
12.13
12.17
10.42
59.00
99.00
60.89
11.27
6.78
6.78
8.10
2.86
0.22
1.95
1.60
0.90
1.42
0.30
0.46
0.34
2.61
22.14
12050268
12050263
12050264
12050236
12050255
12050241
12050262
12050222
31-03130-1032
FG5043 FG8017
FG8013
FG5042
FG24060
10095062
10095054
FG5040
10095058
10095092
31-03130-1032
FG8019
FG8020
FG5003
641755
10095078
10095053
10095067
HN55 Pump Kits & Parts
FG8015
FG11001
10095054
31-03130-1032
10095092
FG9927
FG8016
12050217
FG11001
12050044
Item No.
Description
Price
12050220
12050271
12050272
12050300
1:128 Pump Chl-Med
Pump Rebuild Kit Chl-Med 1%
Pump Rebuild Kit Chl-Med 2%
O-Ring 1% Viton Repair Kit -1:128
**Newly updated Viton handles any chemical
O-Ring for Pump Stem 1%
Motor Rebuild Kit
Adjustable Pump for Chemilizer
Pump Rebuild Kit for Adjustable Pump
Strainer/Filter for Dosmatic & Chemilizer
3/4" x 4' Hose for Chemilizer Medicator
44.48
14.96
14.93
13.91
12050305
12050217
12050341
12050347
12050044
12050345
12050341
12050220
3.44
86.34
80.99
10.62
10.25
12.75
12050271, 12050272
Rich Line Cleaning Pump
Our line of Adjustable Ratio Pumps will retrofit to any Chemilizer. This pump is used
for injecting water line cleaning products at a 128:1 ratio. Adusts from (5% - 0.2%).
Item No.
Description
Price
12050346
Line Cleaning Pump
99.17
182
(800) 845-3374
www.FarmerBoyAg.com
Medicators
AquaBlend
The AquaBlend injector was specifically engineered to accurately medicate and/or
treat water in most agricultural environments. AquaBlend is offered in a 1:128 fixed
ratio model and is designed to handle both liquid chemicals & wettable powders.
Features & Benefits:
• Durable, rugged construction
• Unique tool-free maintenance
• Easy installation and use
• Water Flow Range: .04 - 11 GPM
• Pressure Range: 5 - 90 PSI
• Connections: ¾” NPT (also includes garden hose adapters)
• Weight: 6 lbs.
Specifications
Housing
Dosing Accuracy
Repeatability
Pressure Loss
Maximum Temperature
Minimum Temperature
Maximum Vertical Suction of
Concentrate
Maximum Horizontal Suction
of Concentrate
Self-Priming
Seal Material Available
Maximum Viscosity
Recommended Accessories
Polyacetal (POM)
+/- 10% of Ratio
+/- 5%
Available Upon Request
100°F/38°C
34°F/1°C
13 Feet/396 Centimeters
49 Feet/1493 Centimeters
Yes
Viton - Acids, Oils & Pesticides
Alternative Material Upon Request
2000 cP (Ex. Honey)
140+ Mesh Filter, Check Valve,
Pressure Regulator, Flow
Restrictor
Don't Forget Your
Agitator Pump!
See
Page
186
12050348
12050344
12050343
Item No.
Description
Price
12040034
AquaBlend 1:128
175.00
Kit B - Dosage Gasket & Piston
Kit D - Check Valve Assembly
Motor Spring Kit (Pack of 2)
15.63
18.20
7.05
Replacement Parts
12050343
12050344
12050348
183
Your Best in VALUE and CUSTOMER SUPPORT
Medicators
SuperDos
Dosmatic SuperDos mid-high flow, fluid (water) -driven proportional injectors offer a low cost alternative to
traditional electric technology. Unlike traditional electric pumps, the SuperDos injectors eliminate the need for
electricity and can operate in remote areas. Easy to install and maintain making them ideal for mid-high-flow
injection applications. Most commonly used by animal and livestock producers with the need for adjustability in
dosing settings while injection is in use.
• Flow Rate: 0.05 GPM to 20 GPM
• Feed Ratio: 0.20% to 2.5% (1:500 - 1:40)
Kits
Kit A - Wear Parts
Kit (Dosage Piston &
O-rings)
Kit B - Wear Parts Kit
(Kit A & Shaft)
Kit C - Wear Parts Kit
(Kit A, Inner Cylinder, &
O-ring)
Kit D - Suction Tube
Fitting Assy (Check
Poppet, O-0ring, Spring,
Fitting, Twistlock
Kit E - Wear Parts Kit
(Kits C & D, Shaft,
Gasket)
Kit F - Lower End Cylinder Kit (Inner & Outer
Cylinder, Ratio Adjuster,
O-rings, Pins, Gasket)
Kit G - Complete Lower
End, Filter, Solution Tube
• Operating Pressure: 5 - 100 PSI
• Inlet/Outlet: 1” NPT
Description
14, 17, 44
Manual
Reference
Part #
011850V
011945V
14, 17, 44, 51
7
10
11
194404P
194418H
194417
011850CV
7, 14, 17, 44, 64
12
011463V
10, 11, 12, 13, 80
13
14
011833PV
7, 10, 11, 12, 13,
14, 16, 17, 44, 51,
64, 80
7, 16, 61, 64, 65, 66,
67, 79
212120
*Must Specify
Material
011453A
212005
*Must Specify
Material
194004
010016
212005
*Must Specify
Material
010025
011017
Cylinder, Inner
Spring
Fitting, Suction Tube,
1/4”
O-ring
011961V
011843PV
Kit H - Motor Piston
011863
Assy
Kit M - Mounting Brack- 011432
et Kit (Mounting Bracket,
4 Hex Caps & Nuts)
7, 10, 11, 12, 13, 14,
15, 16, 17, 25, 27,
44, 51, 61, 64, 65,
66, 67, 71, 79, 80
9, 21
56, 57, 58
15
16
17
25
27
44
51
61
64
67
71
010044P
194301F
194406P
212017
*Must Specify
Material
194310D
212025
*Must Specify
Material
194407P
194414
79
80
194410SS
194415
65
66
Don't Forget Your
Agitator Pump!
See
Page
186
Check Poppet
O-ring
Seal Retainer, O-ring
Lower End Gasket
O-ring
Suction Tube, 1/4” x 5’
Filter, for Suction Tube,
1/4” I.D.
Dosage Piston
Shaft
Ratio Adjustment Sleeve
O-ring, Inner Cylinder,
Lower End
Pin, Upper Interlock
O-ring, Outer Cylinder,
Lower End
Cylinder, Outer
Nut, Suction Tube
Fitting
Pin, Narrow Interlock
Twistlock
Item No.
Description
Price
12040031
SuperDos 20
310.00
Kit B - Lower Pump Repair Kit
Kit D - Suction Tube Fitting Assembly
Kit F - Lower End Cylinder Kit
Kit G - Lower Pump Assembly
15.90
27.46
51.02
100.95
Replacement Parts
12050356
12050260
12050062
12050355
Filters & Hose
Item No.
Description
Price
Qty. (100’)
24060010
12050044
¼" ID x 3/8" OD Clear Hose
Filter for Dosmatic & Chemilizer
0.31
10.25
0.27
184
(800) 845-3374
www.FarmerBoyAg.com
Medicators
D128 R
“The Original Flat Top”
.09 to 7 GPM
Dosatron chemical injectors are:
• Water-powered (no electricity needed)
• Easy to use
• Reliable, accurately inject chemicals into water lines
• Proportional, the chemical mix remains the same regardless of pressure and flow
When water enters the injector, it triggers the hydraulic motor which begins moving up and down inside
the body of the injector. On the up stroke, the Dosatron draws fluid up from the concentrate tank in an
action similar to a hypodermic syringe. On the down stroke, the concentrate is displaced into the mixing
chamber, where it is mixed with the water flowing through the unit. Then the water and chemical mixture is
discharged into the water lines.
• Pipe Size: 3/4” NPT
• Weight: 4 lbs
• Dimensions: 13” x 6.25”
• GPM: 0.09 to 7
• Pressure: 7 to 70 PSI
• Ratio: 1:200/1:128/1:100
• Percentage: 0.5% - 5%
• Included Accessories: bypass, mounting bracket,
suction hose with strainer and weight, operating
manual
• Pressure Range - 7-70 PSI
• Ratio 1:200 / .5%
• Ratio 1:128 / .8%
• Ratio 1:100 / 1.0%
Don't Forget Your
Agitator Pump!
See
Page
186
12050038
Item No.
Vendor #
12040010
Description
Price
D128 R
210.00
Replacement Parts
12050133
12050129
12050105
12050207
12050243
12050085
12050146
*
*
*
12050142
*
*
*
12050170
12050173
24060010
12050153
12050119
12050104
12050140
12050190
*
12050099
12050247
12050015
12050242
*
*
12050038
J002VF
J003VF
J005VT
J006VT
J007VT
J042
M003
M005
M006
M007
M009
M011
M012
M103
MP001
MP014
P001
P004
P008
P009
P010
P011
P012
P013
P041
P153
P154
P159
PC005
Upper Dosing Seal
Lower Dosing Seal
Push Rod Seal
Outlet Valve Seal
Admission Valve Seal
Top Cap O-ring Seal
Valve Slide Spring
Valve Slide Pin
Washer
Screw
Actuator Spring
Screw
Delivery Valve Support
Delivery Valve Screw
Actuator Assembly
Wishbone Spring Valve Assembly
Suction Hose (per foot)
Stem Sleeve
Push Rod
Piston Plugger
Slide Valve
Top Cap
Outlet Valve
Piston Shell
Wall Bracket
¼" Suction Hose Retain. Nut
Stem Cap
Body
Piston Assembly 1%
Dosatron Filter
3.13
2.34
2.04
6.95
8.87
2.44
1.09
1.74
2.65
27.70
17.18
0.31
5.93
8.93
11.13
5.54
35.99
26.60
6.16
2.49
1.33
5.00
185
Your Best in VALUE and CUSTOMER SUPPORT
Medicators
DM11F - 11GPM
0.02 to 11 GPM
The DM11F uses a totally redesigned hydraulic, piston-free motor, which allows the
medicator to work properly even in environments with sand, algae, or high mineral
content in the water supply. It also features a highly chemical resistant housing
allowing usage of a wide range of chemicals, including Ph water treatment chemicals
and other substances commonly used to combat bio-film. The DM11F automatically
compensates for flow and pressure changes providing consistent, repeatable results
for your animals. It is perfect for day-old chicks and also for weaners, with flow as
low as .02 GPM.
Features & Benefits:
• Low flow starting at 0.02 GPM - Treats day-old chicks and weaners
• High flow up to 11 GPM - Higher flow for growing animals and larger houses
• Fewer parts - Easy to maintain and field serviceable, no special tools needed
• Larger capacity - Less strain on motor parts for a longer life
• No metal parts - Standard injection parts are resistant to most chemicals and there is no need to
change parts for different chemicals
• Standard bypass - You are able to run clear water at the turn of a switch, without the need for
pre-plumbing
• Easy maintenance - Wear parts are easily accessible, for a quick clean out
• Additional replacement parts available.
Item No.
Vendor #
Description
Price
DM11F
224.12
DM11F Filter
Plunger O-ring (Mid-Section)/
Check Valve O-ring
3/16” x 5/16” O.D. Clear Hose
8mm Hose
Plunger
6’ Suction Hose
Seal Kit
Stem Injector New Style
O-ring Compact Seal/Injector Stem
O-ring Isolation
Diaphragm Assembly
Gasket Pump Body
Check Valve
Check Valve Assembly
10.10
7.03
2.04
0.22
1.12
4.66
8.75
21.23
99.60
21.93
26.10
42.38
7.70
38.21
39.92
12040017
Replacement Parts
12050302
12050295
MPDI207
JDI105VT
24060009
12050301
12050294
12050303
12050304
12050315
12050316
12050317
12050318
12050319
12050292
12050174
110-09
8MM
PDI848
PD1806
M006
JDI100HT
8J040HT
PJDI127HT
JDI127HT
PJDI115HTA
PJDI11
Agitator Pump
MedicatoRx
This pump keeps your medication in suspension instead of all the medication settling
to the bottom and your medicator sucking up chunks of medication, shortening the
life of your seals.your animals. It is perfect for day-old chicks and also for weaners,
with flow as low as .02 GPM.
• Provides lubrication where needed
• Helps lubricate seal
• Quick and easy to use
• No scrubbing
• Flushes
• Will not harm medicator
• Can be soaked or injected
• For best results, soak for 4 hours
• A solution to help maintain medicator performance
• Acts as a cleaner when medicator parts are
soakedfect for day-old chicks and also for weaners,
with flow as low as .02 GPM.
• Eliminates medication clumping
• Perfect for Tetracycline and vitamins
• 115V with 6’ cord
• Suggestion: Attach your medication hose
approximately 4” from the bottom of your
bucket
Item No.
Description
Price
Item No.
Description
Price
12040029
Agitator Pump
67.18
99050812
MedicatoRx
11.00
186
(800) 845-3374
www.FarmerBoyAg.com
Medicators
D25 F
Gator XL
.05 to 11 GPM
• Pressure Range - 3-120 psi
• Ratio 1- 1:28
• 2 to 600 gallons/hour
12050286 Seal Kit Includes:
• 1 - *P169 Check Valve Barb
• 1 - *J024 Injection Sleeve O-Ring
• 1 - *MDPI122 Check Valve Assembly
• 1 - J051 Check Valve Seal
• 1 - *J009 Plunger Seal
Features:
• Pressure Range - 4.3 to 85 PSI
• 5-stage internal mixing chamber
• Proven piston technology
• Open port, self cleaning check valve
• Ratio 1:128 fixed/.8%
Don't Forget Your
Agitator Pump!
Don't Forget Your
Agitator Pump!
See
Page
186
See
Page
186
3010
3020-1
8039
1051-A2
1041
4012
3040
1021
2020
8063-A1
3042-1
2001
1042
8031
8038
2004
1043
2005
1043-A2
4013
1092-A1
1011-A2
3042-1
2011
1071-A1
1032-A1
2001
1022
Item No.
Vendor #
12040025
Description
Price
Gator XL
189.70
Pump Replacement Kit
Pump Piston Quick Clip
Pump Check Valve (pack of 2)
Tension Band (set of 2)
Pump Stem O-ring (set of 2)
Main Motor Body Assembly
Motor Top Cap
Motor Bottom Cap
Pump Stem Assembly with O-rings
Actuator Stops
Pressure Ring
I/O Valve Seat
I/O Valve Assembly
Pump Body Assembly
Motor Piston Assembly
Hose Adapter (Set of 2)
Motor Cap O-ring
Valve Seat Seal (Set of 4)
Valve Seal (Set of 4)
Pressure Fitting
Chemical Pressure Tube
Spacer Washer (Pack of 10)
Retainer Clip (Pack of 10)
Chemical Filter
Actuator Arm Connector
Motor/Pump Connector
Motor & Pump Rebuild Kit
Seal Replacement Kit
11.50
1.95
1.95
1.10
1.10
$1.10
2.44
2.49
6.16
0.31
5.00
7.40
Replacement Parts
12050251
12050275
12050276
12050277
12050278
Item No.
Vendor #
12040005
Description
Price
D25 F
195.19
Seal Kit
Plunger Seal
Check Valve Seal
Injection Stem O-ring
Check Valve Assembly
Check Valve Barb
O-ring for Lid
Nut End
Bracket Mount
1/4” I.D. x 3/3” O.D. Clear Hose
Filter with Insert
Spring Actuator
43.35
7.03
18.12
$2.09
13.64
$1.10
2.44
2.49
6.16
0.31
5.00
7.40
Replacement Parts
12050286
12050296
12050290
12050288
12050085
12050015
12050247
24060010
12050038
12050198
PJ117AF
*J009
*J051
*J024
*MPDI122
*P169
J042
P153
P041
PDI042
PDI043
M238
8031
8039
8038
2020-P
2011-P
*1011-A2
*1021
*1022
*1032-A1
*1041
*1042
*1043
*1043-A2
*1051-A2
*1071-A1
*1092-A1-P
*2001
*2004-P
*2005-P
*3010
*3020-1
*3040-P
*3042-1-P
*3063-A1
*4012
*4013
*8032
*8036
187
Your Best in VALUE and CUSTOMER SUPPORT
Medicators
Stenner Medicator M128 Pump
Stenner Econ Integrator Pump
PERISTALTIC METERING PUMP
Reliable injection of 1 ounce of
solution to 128 ounces of water /
1:128 Ratio. Specifically developed
to treat livestock water with antibiotics, vaccines, dietary supplements,
acids, oxidizers (iodine, chlorine
dioxide, peracetic acid & hydrogen
peroxide), and disinfectants.
The Econ Integrator™ provides proportional injection for
water treatment on livestock farms without the
expense of additional equipment.
M128 Series Benefits:
• Potentiometer on the back of the pump
features “standby” setting that disables
the pump while water consumption still
registers to the controller in livestock
operations
• Adjustable to work with a dry contact water meter with pulse rates of 1, 2, 4, or 10 pulses per
gallon or 1 pulse per liter
• No need for filters upstream to pull out grit, sand and debris
• No need for back pressure valves
• Optional panel system for turnkey installation
• Water and water line disinfection; pH adjustment
• Injection of nutrients and supplements into water lines
• Oxidation of iron, hydrogen sulfide or manganese
• Injection of polyphosphate solutions for corrosion and
scale control on plumbing fixtures
• Patented quick release pump head for periodic tube
replacement, without tools
• Inject common undiluted chemicals without harm to the
pump; eliminate daily stock solution maintenance
• Solid one piece pump tube construction
• Flow rate: 16 gallons per day (gpd)
*Pulse Water Meter sold separately.
The M128 injects at a fixed amount per pulse which is actuated by a dry contacting water meter. The pump has a cable with four lead wires, two that must be
connected to the water meter. Installations with a house controller can utilize the two
remaining wires to register water consumption to the controller.
*Pulse Water Meter sold separately.
*Medicator must be installed after a 25 PSI or lower pressure reducer.
Item No.
Description
Price
Item No.
Description
Price
12040030
24990161
24990005
M128 Medicator/Model M05 25 psi/95 gpd - 120V
Pulse Water Meter Vertical
Pulse Water Meter Horizontal
455.97
192.92
93.34
12050357
24990161
24990005
Econ Integrator Fixed Pump with PCM - 120V
Pulse Water Meter Vertical
Pulse Water Meter Horizontal
268.57
192.92
93.34
Stenner Fixed Rate Chemical
Metering Pump
Stenner Replacement Parts
Pump can be adjustable with the
PCM (Pump Control Module)
• Used to inject chlorine and other
chemicals at well pump
• 3-point roller design assists in anti-siphon protection
• Pump head requires no valves, allows
for easy maintenance
• Self-priming against maximum working pressure, foot valve not required
• Pump does not lose prime or vapor
lock
• Pumps off-gassing solutions and can run dry
• Output volume is not affected by back
pressure
• Injection check valve included with models
rated up to 100 psi (6.9 bar)
*Pulse Water Meter sold separately.
Pump
Tubes
• Easy to change
pump tube; lubrication is not required
• Pump tubes and pump heads interchange
between models
• Flow rate: 3 gallons per day (gpd)
12050314
12050335 - The PCM – “Pump Control Module" utilizes
very reliable, microcontroller timer technology with a
durable relay output, all enclosed in a chemical resistant
ABS plastic housing. A simple knob provides adjustment
of the ontime (.1-1.0 seconds) required per input signal.
Internal jumpers allow user to change models.
Item No.
Description
Price
12040035
12050335
24990161
24990005
Fixed Rate Chemical Pump - 3 gpd, 110V
Power Pump Control Module (PCM1) - 120V
Pulse Water Meter Vertical
Pulse Water Meter Horizontal
224.74
156.39
192.92
93.34
188
12050311
12050313
12050340
Item No.
Description
Price
12050311
12050323
12050324
12050312
12050358
12050313
12050314
12050340
12050349
¼" x 20" Suction/Discharge Tubing
#1 Pump Tube (Pack of 2) for 12040035
#2 Pump Tube (Pack of 2)
#5 Pump Tube (Pack of 2) for 12040030
Tube “G” 16 GPD (Pack of 2) for 12040036
¼" Connecting Nut
¼” Ferrule
Check Valve
Check Valve Duck Bill (Pack of 5)
9.03
25.71
25.71
25.71
24.35
1.35
6.20
13.49
14.64