pricing - Davis Distribution

Transcription

pricing - Davis Distribution
13
PRICING 20
Wireless Audio
PZ System
PZ Receiver
PZ Pre/Rcvr
- Transmitter Supports Up To 8 Wireless Receivers
- 2 Transmitters Can Be Used in Close Proximity
- Wirelessly Transmits High-Quality Audio 90 Feet
- Receiver Has 35W x 2 Channel Digital Amplifiers
- Transmits 3 Discrete Channels of Audio
- RF Audio Signal: 2.4GHz
- IR Remote Included for Wireless Receiver
- Optional Proficient Wireless Preamp/Receiver
- Optional Proficient 40W x 2 Digital Amp
- Optional Wireless Range Extender
- Transmitter (HxWxD):H 1-1/4”* x 7-1/16” x 5-1/2”
- Receiver (HxWxD): H 1-1/4”* x 7-1/16” x 5-1/2”
- 35W x 2 Stereo Amplified Receiver
- Local Input Allows Connection Of External Sources
- Use Up To 8 Wireless Receivers Per Transmitter
- Transmission/Receiver Range: 90 Feet
- RF Audio Signal: 2.4GHz
- IR Remote Included
- Optional Proficient ZERO™ Wireless Music System
- Optional Proficient Wireless Preamp/Receiver
- Optional Proficient 40W x 2 Digital Amp
- Optional Wireless Range Extender
- Dimensions(HxWxD):H 1-1/4”* x 7-1/16” x 5-1/2”
- Local Input for Connection of External Sources
- Use Up To 8 Wireless Receivers Per Transmitter
- Transmission/Receiver Range: 90 Feet
- Transmission/Receiver Range: 90 Feet
- RF Audio Signal: 2.4GHz
- Optional Proficient ZEROTM Wireless Music
System
- Optional Proficient Wireless MultiRoom Receiver
- Optional Proficient 40W x 2 Digital Amp
- Optional Wireless Range Extender
- IR Remote Included
- Dimensions(HxWxD):H 1 1/4”* x 7-1/16” x 5-1/2”
MSRP $680.00
MSRP $430.00
MSRP $280.00
PZ 80W Amp
PZ Extender
- Class D Digital Amplifier
- A super-compact digital amplifier
- 40 Watts/Ch RMS at <0.9% THD,
20Hz to 20kHz
- Frequency Response: 20Hz – 20kHz
- Sensitivity: 892 mV
- Large Positive Spring Terminals Accept 12ga Wire
- Dimensions (HxWxD): H 1-1/4” x 7-1/16” x 5-1/2”
- Extends RF Range by 150 Feet
- The Wireless Range Extender
- RF Channel Selection Switch
- LED Status Indicator
- Plug & Play – No Software Needed
- Includes Power Supply
- Sender/Repeater (HxWxD): H 1-1/16”* x 4-3/4” x 4-1/2”
- Converts 2.4GHz to 5.8GHz for Rebroadcast
MSRP $250.00
MSRP $500.00
Multiroom controller
M6
M4
- Multiroom Receiver
- Six zone audio controller
- Six source inputs + 2 AM/FM Tuners
- Power: 30 watts x 12 channels
- Doorbell & telephone paging mute
- All digital amplification
- Six PMKIR master keypads with IR
- Six IR Single Flashers
- Programmable via Proficient Editor software
- Four Zone Audio Controller
- Six Source Inputs
- 30 Watts x 8 Channels
- Telephone Paging & Doorbell Mute
- All Digital Amplification
- Four PMKIR Master Keypads with IR
- Six IR Single Flashers
- Programmable Via Proficient Editor Software
- Premium Cast Aluminum Faceplate
MSRP $2870.00
MSRP $1520.00
1
13
PRICING 20
Amplifiers
M8
M2
M3
- 8 Channel Power Amplifier
- Power: 35 watts per channel @ 0.05% THD +/-3dB
- High Current Discrete Amplifier Design
- Pass Through Output
- Premium Cast Aluminum Faceplate
- 4 pos. source selection switch on each channel
- Odd-Even Pairs are Bridgeable for Higher Power
- Remote Power Power-On Via Signal Switching
- Includes Bolt-On Rack Ears
- 2 Channel Power Amplifier
- Power: 125W per channel @ 0.05% THD +/-3dB
- Amplifier Stable to 2 Ohms
- High Current Discrete Amplifier Design
- Pass Through Output
- Premium Cast Aluminum Faceplate
- Auto Sensing Power On/Off
- Stereo Line Level Input
- Individual Input Level Adjustments
- High-current mono amp with built-in crossover
network
- Designed for use with the IWS10 inwall subwoofer
- 180 watts single channel
- Variable low pass crossover: 35Hz-150Hz
- LFE input
- Pass through output
- Phase switch
- Remote power-on switching via signal sensing
MSRP $835.00
MSRP $625.00
MSRP $500.00
The Source
SOURCEKEYPAD-BLK
SOURCEKEYPAD-WHT
SOURCEDOCKBLK
SOURCEDOCKWHT
- High-Res, 64K Color LCD Display
- Menu, Source Component & Metadata Display
- Fully Retrofit Compatible with PMKIR Installations
- Volume Control Knob w/Back-Lit Level Indicator
- 7 Back-Lit, Configurable ‘Hard Keys’
- Built-In IR Receiver
- White Version Includes White bezel
- Black version includ. black, bone & almond bezels
- Converts iPod Audio Into a Balanced Audio Signal
- Converts iPod Serial Data to RS485 Data
- RJ45 Jack for CAT5 Connection
- Specifically for M4 & M6
- 1 iPod Compatible Source Dock
- 1 Source Dock Adapter
- 1 Stereo Mini to RCA Audio Cable
- Requires The Source Power Supply
MSRP $500.00
MSRP $250.00
SOURCEPOWERAUPPLY
- 24V DC 2.5 Amp Power Supply for The Source.
- Supports up to six Dock Adapters
MSRP $50.00
M4 & M6 Keypads
PMKIR
PMK
- Single-gang keypad excluding source selection.
- Built-In IR Receiver.
- 8 source select buttons.
- 7 source buttons
- 4 additional buttons can be programmed
for any function exc. source selection.
- Extra buttons for custom configuration.
- White, bone & almond plates & inserts.
- Single-gang keypad
- 8 source select buttons
- 7 source buttons can be programmed for
function control
- 5 additional buttons can be programmed
for any function excl. source selection
- Extra buttons for custom configuration
- White, bone & almond plates & inserts
MSRP $125.00
MSRP $110.00
2
13
PRICING 20
M4 & M6 Keypads
PFK
PNK
- Function Keypad
- 14 configurable buttons.
- Ribbon cable for connection to PMKIR or
PMK Master keypads.
- Extra buttons for custom configuration.
- White, bone and almond inserts
- Numeric Keypad
- 16 configurable buttons.
- Ribbon cable for connection to PMKIR
or PMK Master keypads.
- Extra buttons for custom configuration.
- White, bone and almond inserts
MSRP $60.00
MSRP $60.00
M4 & M6 Accessories
COMMANDERINTERFACEKIT
CONTROLMODULE
RJA-1.1-ADAPTER
- (1) Command Interface
- (1) USB to DB9 adapter cable
- (1) 6’ DB9 to quad 3.5mm plug transfer cable
- (1) Proficient Editor Software CD
- (1) Power supply, (1) Carrying case
- Communication interface for M4 or M6
- Expansion Port RS232 Buffer for External Control
- Connects via Cat5 to M4 or M6 Expansion Port
- RS232 9-Pin Male Data I/O
- For use when RJ-45 terminated connection is
preferred to bare wire connection to Proficient
Master Keypads. Connects data, power and IR
signals between the keypad and the M4 or M6
- Contains 6 Adapters
MSRP N/A
MSRP $200.00
MSRP $80.00
Signature Series Subwoofers
GS10
GS6
- 10” Subwoofer, Power: 250 Watts RMS
- Frequency Response: 28Hz - 200Hz
- Input: Left & Right Line Level, LFE
- Phase Switch: 0 - 180
- Protection: Overload Protection Circuit
- Power On/Off: Auto Sensing
- Crossover: 50Hz - 150Hz
- Dimensions (H x W x D): 131/2” x 131/2” x 141/2”
- Powered subwoofer w/ 6.5” long-excursion
composite paper cone woofer
- Power: 30 Watts RMS, Phase Switch: 0 - 180
- Frequency Response: 28Hz - 200Hz
- Input: 3.5mm Jack for Stereo Line Level
- Protection: Overload Protection Circuit
- Power On/Off: Auto Sensing, Rear Port
- Dimensions (H x W x D): 9-5/8” x 9” x 10”
MSRP $900.00
MSRP $300.00
GS2.1 (Sub/Sat System)
- Compact 2.1-channel sound system that equals
the fidelity of larger systems but fits almost un
seen into any room
- Sub Power: 30 Watts RMS
- Satellite Power: 10 Watts x 2 Channels
- System Frequency Response: 35Hz - 20kHz
- Input: 3.5mm Jack for Stereo Line Level
- Master Volume and Subwoofer Level Controls
- Phase Switch: 0 - 180
- Protection: Overload Protection Circuit
- Power On/Off: Auto Sensing
- Subwoofer Dimensions (H xWxD): 9-5/8”x9”x10”
- Satellite Dimensions (H x W x D): 7”x5-5/8”x 43/4”
MSRP $600.00
3
13
PRICING 20
Inwall Sub System
IWS82
IWS100
- Dual 8” In-Wall Sub
- 200 Watts RMS
- 30 Hz-120 Hz Frequency Response
- Long Ecursion Graphite Woofers
- Fits in a Standard 2x4 Stud
- Designed to use w/ the M3 Amp/Crossover
- Wall Cut Out 18-1/2” x 9-3/4”
- In-Wall 10” Subwoofer
- 250 Watts RMS
- 36 Hz-150 Hz Frequency Response
- Inverted Neodymium Magnet
- Baffle Dimensions 13-5/8” x 13-5/8”
- Wall Cut Out 12-1/16” x 12-1/16”
MSRP $625.00
MSRP $500.00
ICS10
BB-IWS10
- 10” Passive Ceiling Sub
- 175 Watts RMS
- 30 Hz-120 Hz Frequency Response
- Long Ecursion Graphite Woofers
- Designed to use w/ the M3 Amp/Crossover
- Ceiling Cut Out 11-7/8”
- MDF Back Box for IWS10
- Fits any Standard 16” Stud Bay
- Cuts Down on Translation Energy Vibration
MSRP $375.00
MSRP $250.00
PS Series Subs
PS12
PS10
PS8
- 12” Subwoofer
- 250 Watts RMS
- 28 Hz-200 Hz Frequency Response
- Low Frequency Effects Input
- Overload Protection Circuit
- Auto Power Via Signal Sensingt
- 10” Subwoofer
- 120 Watts RMS
- 32 Hz-200 Hz Frequency Response
- Low Frequency Effects Input
- Overload Protection Circuit
- Auto Power Via Signal Sensing
- 8” Subwoofer
- 80 Watts RMS
- 45 Hz-200 Hz Frequency Response
- Low Frequency Effects Input
- Overload Protection Circuit
- Auto Power Via Signal Sensing
MSRP $600.00
MSRP $500.00
MSRP $360.00
4
13
PRICING 20
Ceiling LCR Speakers
C1030
C870
C840
- One 10” In-Ceiling LCR Speaker w/ Kevlar Woofers
- 3” Pivoting Kevlar Midrange
- 1” Pivoting Aluminum Dome Tweeter
- 200 Watts Power Handling
- 40 Hz-22 kHz Frequency Response
- 4 Ohm Impedance
- 92dB 1W/1m Sensitivity
- One 8” In-Ceiling LCR Speaker w/ Kevlar Woofers
- 1” Pivoting Aluminum Dome Tweeter
- 175 Watts Power Handling
- 28 Hz-22 kHz Frequency Response
- 8 Ohm Impedance
- 92dB 1W/1m Sensitivity
- One 8” In-Ceiling LCR speaker w/ graphite woofers
- 1” Pivoting Silk Dome Tweeter
- 150 Watts Power Handling
- 40 Hz-22 kHz Frequency Response
- 8 Ohm Impedance
- 92dB 1W/1m Sensitivity
MSRP $690.00
MSRP $465.00
MSRP $400.00
PCB-C1000
Pre-Construction Bracket
MSRP $60.00
CPC-800
Speaker Cover Plate
MSRP $40.00
CPC-800
Speaker Cover Plate
MSRP $40.00
C660
C655
C650
- 1 6.5” in-ceiling LCR speaker w/ graphite woofers
- 1” Pivoting Aluminum Dome Tweeter
- 125 Watts Power Handling
- 36 Hz-22 kHz Frequency
Response
- 8 Ohm Impedance
- 92 dB 1W/1m Sensitivity
- One 6.5” In-Ceiling LCR Speaker w/
Graphite Woofer
- 1” Pivoting Silk Dome Tweeter
- 100 Watts Power Handling
- 45 Hz-20 kHz Frequency
Response
- 8 Ohm Impedance
- 91dB 1W/1m Sensitivity
- One 6.5” In-Ceiling LCR w/ Polypropylene Woofers
- 1” Pivoting Silk Dome Tweeter
- 100 Watts Power Handling
- 40 Hz-22 kHz Frequency
Response
- 8 Ohm Impedance
- 91dB 1W/1m Sensitivity
MSRP $300.00
MSRP $250.00
MSRP $190.00
CTB-C600
Ceiling Tile Bracket
MSRP $35.00
CPC-600
Speaker Cover Plate
MSRP $40.00
Inwall LCR Speakers
IW650
IW625
- One 6.5” In-Wall LCR Speaker
- Two 6.5” Kevlar Woofers
- 1” Pivoting Aluminum Dome Tweeter
- 150 Watts Power Handling
- 50 Hz-20 kHz Frequency Response
- 8 Ohm Impedance
- 90dB 1W/1m Sensitivity
- One 6.5” In-Wall LCR Speaker
- Two 6.5” Graphite Woofers
- 1” Pivoting Soft Dome Tweeter
- 125 Watts Power Handling
- 55 Hz-20 kHz Frequency Response
- 8 Ohm Impedance
- 90dB 1W/1m Sensitivity
MSRP $580.00
MSRP $490.00
PCB-IW600 Pre-Construction Bracket
PCB-IW600 Pre-Construction Bracket
MSRP $35.00
MSRP $35.00
5
13
PRICING 20
Inwall LCR Speakers
IW550
IW525
- One 5.25” In-Wall LCR Speaker
- Two 5.25” Kevlar Woofers
- 1” Pivoting Aluminum Dome Tweeter
- 125 Watts Power Handling
- 60 Hz-20 kHz Frequency Response
- 8 Ohm Impedance
- 88dB 1W/1m Sensitivity
- One 5.25” In-Wall LCR Speaker
- Two 5.25” GraphiteWoofers
- 1” Pivoting Soft Dome Tweeter
- 100 Watts Power Handling
- 65 Hz-20 kHz Frequency Response
- 8 Ohm Impedance
- 88dB 1W/1m Sensitivity
MSRP $390.00
MSRP $330.00
PCB-IW500 Pre-Construction Bracket
PCB-IW500 Pre-Construction Bracket
MSRP $35.00
MSRP $35.00
Onwall LCR Speaker
F400GB (Gloss Black)
- One 4” On-Wall LCR Speaker w/ Graphite Woofers
- 1” Pivoting Aluminum Dome Tweeter
- ±3dB Bass & Treble Contour Switches
- 100 Watt Power Handling
- Frequency Response: 62Hz-20kHz
- 4 Ohm Impedance
- Sensitivity: 86dB 1W/1m
MSRP $540.00
Inwall Speakers
W850 (Pair)
W800 (Pair)
W690 (Pair)
- One 8” Pair In-Wall Speakers w/ Kevlar Woofer
- 1” Pivoting Aluminum Dome Tweeter
- 175 Watts Power Handling
- 28 Hz-22 kHz Frequency Response
- 8 Ohm Impedance
- 92 dB 1W/1m Sensitivity
- One 8” Pair In-Wall Speakers w/ Graphite Woofer
- 1” Pivoting Aluminum Dome Tweeter
- 150 Watts Power Handling
- 28 Hz-22 kHz Frequency Response
- 8 Ohm Impedance
- 92 dB 1W/1m Sensitivity
- One 6.5” Pair In-Wall Speakers w/ Kevlar Woofer
- 1” Pivoting Aluminum Dome Tweeter
- 150 Watts Power Handling
- 32 Hz-22 kHz Frequency Response
- 8 Ohm Impedance
- 92 dB 1W/1m Sensitivity
MSRP $660.00
MSRP $550.00
MSRP $575.00
PCB-W800
MSRP $35.00
Pre-Construction Bracket
PCB-W800
MSRP $35.00
Pre-Construction Bracket
PCB-W600
Pre-Construction Bracket
MSRP $35.00
6
13
PRICING 20
Inwall Speakers
W680 (Pair)
W670 (Pair)
W665 (Pair)
- One 6.5” Pair In-Wall Speakers w/ Graphite Woofer
- 1” Pivoting Aluminum Dome Tweeter
- 125 Watts Power Handling
- 32 Hz-22 kHz Frequency Response
- 8 Ohm Impedance
- 92 dB 1W/1m Sensitivity
- One 6.5” Pair In-Wall Speakers w/
Polypropylene Woofer
- 1” Pivoting Silk Dome Tweeter
- 100 Watts Power Handling
- 36 Hz-20 kHz Frequency Response
- 8 Ohm Impedance
- 91 dB 1W/1m Sensitivity
- One 6.5” Pair In-Wall Speakers w/
Polypropylene Woofer
- .75” Fixed Soft Dome Tweeter
- 75 Watts Power Handling
- 45 Hz-20 kHz Frequency Response
- 8 Ohm Impedance
- 90 dB 1W/1m Sensitivity
MSRP $460.00
MSRP $350.00
MSRP $200.00
PCB-W600
CPW-600
Pre-Construction Bracket
MSRP $35.00
DAVIS $80.00
Speaker Cover
MSRP $40.00
InCeiling Speakers
C850 (Pair)
C800 (Pair)
C790 (Pair)
- One Pair 8” In-Ceiling Speaker
w/ Kevlar Woofer
- 1” Pivoting Aluminum Dome
Tweeter
- 175 Watts Power Handling
- 28 Hz-22 kHz Frequency
Response
- 8 Ohm Impedance
- 92 dB 1W/1m Sensitivity
- One 8” Pair In-Ceiling Speaker
w/ Graphite Woofer
- 1” Pivoting Aluminum
Dome Tweeter
- 150 Watts Power Handling
- 28 Hz-22 kHz Frequency
Response
- 8 Ohm Impedance
- 92 dB 1W/1m Sensitivity
- One 8” 2 in-ceiling speaker w/
polypropylene Woofer
- 1” Pivoting Soft Dome
Tweeter
- 125 Watts Power Handling
- 36 Hz-20 kHz Frequency
Response
- 8 Ohm Impedance
- 92 dB 1W/1m Sensitivity
MSRP $660.00
MSRP $560.00
MSRP $360.00
PCB-C800
PCB-C800-EW
- Pre-Construction Bracket
CTB-C800
CPC-800
- 15” Extension Wing
- Ceiling Tile Bracket
- Speaker Cover Plate
MSRP $35.00
MSRP $40.00
MSRP $35.00
MSRP $12.00
C645 (Pair)
C640 (Pair)
C625 (Pair)
- One 6.5” Pair In-Ceiling Speaker
w/ Kevlar Woofer
- 1” Pivoting Aluminum Dome
Tweeter
- 150 Watts Power Handling
- 32 Hz-22 kHz Frequency
Response
- 8 Ohm Impedance
- 92 dB 1W/1m Sensitivity
- One 6.5” 2 in-ceiling speaker
w/ graphite woofer
- 1” Pivoting Aluminum Dome
Tweeter
- 125 Watts Power Handling
- 32 Hz-22 kHz Frequency
Response
- 8 Ohm Impedance
- 92 dB 1W/1m Sensitivity
- One 6.5” Pair In-Ceiling Speaker
w/ Graphite Woofer
- 1” Pivoting Silk Dome
Tweeter
- 100 Watts Power Handling
- 45 Hz-20 kHz Frequency
Response
- 8 Ohm Impedance
- 91 dB 1W/1m Sensitivity
MSRP $540.00
MSRP $440.00
MSRP $330.00
PCB-C600
PCB-C600-EW
CTB-C600
CPC-600
Pre-Construction Bracket
15” Extension Wing
Ceiling Tile Bracket
Speaker Cover Plate
MSRP $35.00
MSRP $12.00
MSRP $35.00
MSRP $40.00
7
13
PRICING 20
InCeiling Speakers
C620 (Pair)
C610 (Pair)
C605 (Pair)
- One 6.5” 2 In-ceiling speaker
/ polypropylene woofer
- 1” Pivoting Silk Dome Tweeter
- 100 Watts Power Handling
- 36 Hz-20 kHz Frequency
Response
- 8 Ohm Impedance
- 91 dB 1W/1m Sensitivity
- One 6.5” 2 in-ceiling speaker
w/ polypropylene woofer
- 1” Pivoting Soft Dome Tweeter
- 85 Watts Power Handling
- 40 Hz-20 kHz Frequency
Response
- 8 Ohm Impedance
- 91 dB 1W/1m Sensitivity
- One 6.5” 2 in-ceiling speaker
w/ polypropylene woofer
- .75” Fixed Soft Dome Tweeter
- 75 Watts Power Handling
- 45 Hz-20 kHz Frequency
Response
- 8 Ohm Impedance
- 90 dB 1W/1m Sensitivity
MSRP $290.00
MSRP $240.00
MSRP $190.00
PCB-C600
PCB-C600-EW
CTB-C600
CPC-600
Pre-Construction Bracket
15” Extension Wing
Ceiling Tile Bracket
Speaker Cover Plate
MSRP $35.00
MSRP $12.00
MSRP $35.00
MSRP $40.00
C600
- Ceiling Speaker
- 61/2” Polypropylene Woofer
- 1/2” Fixed Polyethylene Tweeters
- Power Handling: 75 Watts
- Frequency Response: 55Hz - 20kHz
- Impedance: 8Ω
- Sensitivity: 89dB 1W/1m
- Diameter x Depth: 9” x 31/2”
- Ceiling Cut Out: 7-11/16”
MSRP $130.00
C500
C800TT
C600TT
- One 5.25” Pair In-Ceiling
w/ Polypropylene Woofer
- .5” Pivoting Polyamide Hard
Dome Tweeter
- 40 Hz-20 kHz Frequency
Response
- 75WPower Handling
- 8 Ohm Impedance
- 90 dB 1W/1m Sensitivity
- One 8” In-Ceiling w/Dual
Voice Coil Kevlar Woofer
- Twin Pivoting 1” Aluminum
Dome Tweeter
- 28 Hz-22 kHz Frequency
Response
- 150W Power Handling
- 8 Ohm Impedance
- 92 dB 1W/1m Sensitivity
- One 6.5” in-ceiling 2 voice
coil polypropylene woofer
- Twin .5” Hard Dome Tweeter
- 36 Hz-20 kHz Frequency
Response
- 75W Power Handling
- 8 Ohm Impedance
- 92 dB 1W/1m Sensitivity
MSRP $200.00
MSRP $315.00
MSRP $175.00
PCB-C500
Pre-Construction Bracket
PCB-C500-EW
15” Extension Wing
Speaker Cover Plate
PCB-C800-EW
CTB-800
15” Extension Wing
Pre-Construction Bracket
CTB-600
Ceiling Tile Bracket
MSRP $35.00
Ceiling Tile Bracket
MSRP $35.00
CPC-800
PCB-C600
MSRP $35.00
MSRP $12.00
MSRP $12.00
MSRP $40.00
Pre-Construction Bracket
MSRP $35.00
MSRP $35.00
CPC-500
PCB-C800
CPC-600
Speaker Cover Plate
MSRP $40.00
Speaker Cover Plate
MSRP $40.00
8
13
PRICING 20
Signature Series Speaker
GL6
- GL6 LCR Speaker
- Power Handling: 125 Watts
- Frequency Response: 46Hz - 20kHz
- Impedance: 4Ω
- Sensitivity: 89dB 1W/1m
- Bookshelf Design
- Dimensions (H x W x D): 8” x 24” x 101/2”
MSRP $750.00
TV Sound Bars
GSB3
MT2
- TV Sound Bar
- This single enclosure contains all three front speakers—left, center & right—
for a 5.1 or 7.1 system, in one 36” long, matte-black bar that mounts above
or below your TV
- Surface and wall mounts are included
- Power Handling: 100 Watts
- Frequency Response: 90Hz - 20kHz
- Impedance: 4Ω
- Sensitivity: 85dB 1W/1m
- Surface and Wall Mount Brackets Included
- Dimensions (H x W x D): 6” x 36” x 4-1/8”
- Max TV, TV Speaker with Bluetooth
- Built-in Bluetooth lets you connect a smartphone or computer
wirelessly, so you can enjoy your music collection or Internet radio
through the MaxTV MT2’s powerful speakers.
- Stereo Down-Firing 51/4” Treated Paper Subwoofers
- Two 1” Silk Dome Tweeters
- Bi-Amped, 80 Watts Total Amplification
- Matte Black Finish
- Four 2 1/2” Treated Paper Midranges
- Inputs: RCA Analog, Optical and Coax Digital
- Frequency Response: 35Hz - 20kHz
- Includes IR Remote Control
- Dimensions (H x W x D): 4” x 28” x 16 1/2”
MSRP $625.00
MSRP $599.00
Rock Speakers
R800G (Granite)
R800S (Sandstone)
R650G (Granite)
R650S (Sandstone)
R800TTG (Granite)
R800TTS (Sandstone)
- One Pair 8” Rock Speaker w/ Graphite Woofer
- 1” Polyamide Dome Tweeter
- 90 Watts Power Handling
- 65 Hz-20 kHz Frequency Response
- 8 Ohm Impedance
- 95 dB 1W/1m Sensitivity
- One Pair 6.5” Rock Speaker w/ Graphite Woofer
- 1” Polyamide Dome Tweeter
- 60 Watts Power Handling
- 80 Hz-20 kHz Frequency Response
- 8 Ohm Impedance
- 88 dB 1W/1m Sensitivity
- 8” Dual Voice Coil Graphite Woofer
- Two 1” Polyamide Dome Tweeters
- 90 Watt Power Handling
- Frequency Response: 65Hz - 20Hz
- 8 Ohm Impedance
- 90 dB 1W/1m Sensitivity
MSRP $500.00
MSRP $375.00
MSRP $375.00
9
13
PRICING 20
Indoor/Outdoor
AW600TT-BLk
AW600TT-WhT
AW500TT-BLK
AW500TT-WhT
AW830-BLK
AW830-WHT
- One Indoor/Outdoor Speaker
- 6.5” Dual VC Polypropylene Woofer
- Two 1” Pivoting Supernil Soft Dome Tweeters
- 125 Watts Power Handling
- 50 Hz-20 kHz Frequency Response
- 4 Ohm Impedance
- 91 dB 1W/1m Sensitivity
- One Indoor/Outdoor Speaker
- 5.25” Dual VC Polypropylene Woofer
- Two 1” Pivoting Supernil Soft Dome Tweeters
- 100 Watts Power Handling
- 60 Hz-20 kHz Frequency Response
- 4 Ohm Impedance
- 89 dB 1W/1m Sensitivity
- One Pair Indoor/Outdoor Speakers
- 8” Polypropylene Woofer, 3” Graphite Midrange
- 1” Pivoting Soft Dome Tweeters
- 175 Watts Power Handling
- 35 Hz-20 kHz Frequency Response
- 4 Ohm Impedance
- 89 dB 1W/1m Sensitivit
MSRP $390.00
MSRP $290.00
MSRP $690.00
AW650-BLK
AW650-WhT
AW525-BLK
AW525-WHT
AW400-BLK
AW400- WHT
- One Pair Indoor/Outdoor Speaker
- 6.5” Polypropylene Woofer
- 1” Pivoting Supernil Soft Dome Tweeters
- 150 Watts Power Handling
- 37 Hz-20 kHz Frequency Response
- 4 Ohm Impedance
- 89 dB 1W/1m Sensitivity
- One Pair Indoor/Outdoor Speaker
- 5.25” Polypropylene Woofer
- 1” Pivoting Supernil Soft Dome Tweeters
- 125 Watts Power Handling
- 45 Hz-20 kHz Frequency Response
- 8 Ohm Impedance
- 88 dB 1W/1m Sensitivity
- One Pair Indoor/Outdoor Speaker
- 4” Polypropylene Woofer
- .75” Supernil Soft Dome Tweeters
- 100 Watts Power Handling
- 55 Hz-20 kHz Frequency Response
- 8 Ohm Impedance
- 87 dB 1W/1m Sensitivity
MSRP $525.00
MSRP $400.00
MSRP $300.00
Center Channel
CC550
CC540
CC400
- One 5.25” Bookshelf Center Channel w/ Kevlar Woofer
- 3” Kevlar Midrange
- 1” Aluminum Dome Tweeter
- 125 Watts Power Handling
- 40 Hz-20 kHz Frequency Response
- 8 Ohm Impedance
- 88 dB 1W/1m Sensitivity
- One 5.25” Bookshelf Center Channel w/ Graphite Woofer
- 3” Graphite Midrange
- 1” Aluminum Dome Tweeter
- 100 Watts Power Handling
- 70 Hz-20 kHz Frequency Response
- 8 Ohm Impedance
- 89 dB 1W/1m Sensitivity
- One 4” Bookshelf Center Channel Speaker
- 4” Polypropylene Woofer
- 1” Aluminum Dome Tweeter
- 85 Watts Power Handling
- 80 Hz-20 kHz Frequency Response
- 8 Ohm Impedance
- 89 dB 1W/1m Sensitivity
MSRP $415.00
MSRP $315.00
MSRP $225.00
10
13
PRICING 20
Infrared Kits
IRSHELFTOPKIT
IRPLASMAKIT
- (1) IR Shelf Top Receiver
- (1) IR Router
- (1) IR Power Supply-200mA
- (4) IR Single Flshers
- (1) IR Plasma Receiver
- (1) IR Router
- (1) IR Power Supply-200mA
- (4) IR Single Flshers
MSRP $200.00
MSRP $330.00
IRMINIKIT-BLK
IRFISHEYEKIT
- (1) IR Mini Receiver
- (1) IR Router
- (1) IR Power Supply-200mA
- (4) IR Single Flshers
- (1) IR Fish Eye Receiver
- (1) IR Router
- (1) IR Power Supply-200mA
- (4) IR Single Flshers
MSRP $290.00
MSRP $295.00
Infrared Components
IRPLASMARECEIVER
IRFISHEYERECEIVER
IRMINIRECEIVER-BLK
Surface-mount IR plasma receiver.
The “Smart Circuit” blocks interference
from plasmas or CFLs. LEDs indicate
systemstatus and IR activity. IR Terminal included
Ambient Noise Suppression and LEDs to indicate
system status and IR activity. Includes four bezels
(white, black, almond, and bone) and 2 Ambient
Light Restrictor(ALR) bezels for severe plasma or
CFL environments. IR Terminal included
Surface-mount mini IR receiver features Ambient
Noise Suppression and LEDs to indicate system
status and IR activity. IR Terminal included
MSRP $225.00
MSRP $180.00
MSRP $175.00
IRSHELFTOPRECEIVER
IRSHELFTOPALRRECEIVER
IRROUTER
Shelf-top IR receiver features Ambient Noise
Suppression and LEDs to indicate system status
and IR activity. IR Terminal included
Shelf-top IR receiver with Ambient Light Restrictor.
ALR minimizes interference from plasma and CFL
environments. Features LEDs to indicate system
status and IR activity. IR Terminal included.
Central router for Proficient IR systems. Controls
IR receivers and Flashers. Equipped with 3.5mm
mini jacks. Multiple IR Routers can be cascaded.
MSRP $100.00
MSRP $100.00
MSRP $75.00
IRPOWERSUPPLY-250MA
IRPOWERSUPPLY-1.2A
12V DC, 200mA regulated power supply designed for use in small to moderate IR systems.
Powers the IR Receivers, IR Router, IR Hub and
IR Flashers
12V DC, 1.2 Amp regulated power supply designed for use in larger IR systems. Powers the IR
Receivers, IR Router, IR Hub and IR Flashers.
MSRP $20.00
MSRP $75.00
IRSINGLEFLASHER
IRDUALFLASHER
LED flashes red to indicate operation. Features
docking port which allows quick installation of IR
Flasher on a component, as well as easy removal
of IR Flasher. Includes an 8’ wire for painless
hookup to IR Router or IR Hub
LEDs flash red to indicate operation. Features
docking ports which allow quick installation of IR
Flashers on components, as well as easy removal
of IR Flashers. The Dual IR Flasher splits to two
8’ wires for easy hookup to IR Router or IR Hub.
MSRP $20.00
MSRP $30.00
11
13
PRICING 20
Speaker Selectors
SS4VC
SS8P
SS4P
- 4 Pair Transformer-Based On/Off Speaker Selector
with Volume Controls
- Power Handling: 60 watts per channel.
- Frequency Response: 20Hz - 20kHz.
- Protection: Front mounted switch & rear override.
- Includes Area Labels.
- 8 Pair Speaker Selector
- Power Handling: 125 watts per channel.
- Frequency Response: 20Hz - 20kHz.
- Protection: Front mounted switch & rear override.
- Includes Area Labels.
- 4 Pair Speaker Selector
- Power Handling: 125 watts per channel.
- Frequency Response: 20Hz - 20kHz.
- Protection: Front mounted switch & rear override.
- Includes Area Labels.
MSRP $370.00
MSRP $230.00
MSRP $140.00
Volume Controls
VC60I
VC45I
VCS60
- 60W impedance-balancing volume control
with autoformer
- Fits in most single-gang J-boxes and plaster rings
- Includes white, bone and almond plates, inserts
and knobs
- Frequency Response: 20Hz - 20kHz
- Total Attenuation: 42dB (max)
- 45W impedance-balancing volume control
with autoformer
- Fits in most single-gang J-boxes and plaster rings
- Includes white, bone and almond plates, inserts
and knobs
- Frequency Response: 20Hz - 20kHz
- Total Attenuation: 42dB (max)
- 60W stereo volume control with autoformer
- Fits in most single-gang J-boxes and plaster rings
- Includes white, bone and almond plates, inserts
and knobs
- Frequency Response: 20Hz - 20kHz
- Total Attenuation: 42dB (max)
MSRP $70.00
MSRP $40.00
MSRP $55.00
VC60SL
VC60AW
- 60W slider stereo volume control
- Fits in most single-gang J-boxes and plaster rings
- Includes white, bone and almond plates, inserts
and knobs
- Frequency Response: 20Hz - 20kHz
- Total Attenuation: 42dB (max)
- 60-watt weather resistant volume control
- Fits onto 3/4” conduit or can be surface mounted
- Available in Gray
- Frequency Response: 20Hz - 20kHz
- Total Attenuation: 42dB (max)
MSRP $85.00
MSRP $100.00
12
13
PRICING 20
Back Boxes
BB-C650
BB-W600
BB-C800
- One metal back box for W665/670/680/690
inwall speakers. UL-263-03 1-hour fire rating.
- One metal back box. UL-263-03 1-hour fire rating.
- Fits C790/800/850/870/800TT/850TTeiling
speakers
- One metal back box. UL-263-03 1-hour fire rating.
- Fits C605/610/620/640/645/650/660/600
TT ceiling speakers. CMB-24 Mounting bars are
needed when installing in ceiling joists 24” oncenter or suspended
MSRP $105.00
MSRP $105.00
MSRP $105.00
CMB-24
- 24” Mounting Bars For BB-C650
- These 24” mounting bars are designed to fit the
Proficient BB-C650 back box and allow the back
box to be mounted to 24” ceiling joists.
MSRP $30.00
13