SPMWT - Wall-Tex™ call 800-333-3136
Transcription
SPMWT - Wall-Tex™ call 800-333-3136
WALL GRAPHICS S PMWT - Wall-Tex ™ 7.0 mil White Woven Polyester Fabric With a Clear Acrylic Pressure-Activated Ultra Removable Adhesive and on a 90# LayFlat Release Liner - Designed for Interior Walls Ideal Surfaces: The Mojave Digital Media family of solvent print media now includes Wall-Tex — a flexible 7.0 mil white, woven polyester fabric, coated Painted Walls Most Types of Wall Papers Wood Paneling with a clear acrylic pressure-activated ultra removable adhesive designed for interior walls, on a 90# LayFlat release liner. Wall-Tex is intended for use in high quality interior wall marking Compatible Printing Methods: Screen Latex Eco-Solvent UV-Curable Solvent or decal applications requiring durability, flexibility, and low shrinkage and edge curl, such as wall decorations and point of purchase decals. Wall-Tex is available in both roll and sheet form. Corporate Headquarters 27001 Agoura Road Suite 100 Calabasas Hills California 91301 For Wall-Tex samples and ordering information, contact your local authorized dealer or call direct: (818) 880-8060 (818) 880-1144 Atlanta Sales: (800) 922-5880 Chicago Sales: (800) 766-4939 call Phone: Fax: E-mail: [email protected] 800-333-3136 or visit www.catalinagraphicfilms.com WALL GRAPHICS S PMWT - Wall-Tex ™ 7.0 mil White Woven Polyester Fabric With a Clear Acrylic Pressure-Activated Ultra Removable Adhesive and on a 90# LayFlat Release Liner - Designed for Interior Walls Catalina Graphic Films’ Wall-Tex is ideal for Screenprint, Eco-Solvent, Solvent, UV-Based, and Latex inkjet printers. R E C O M M E N D E D A P P L I CAT I O N S OV E RV I E W • Decals Face Film 7.0 mil Flexible White, Woven Polyester Fabric • Indoor Adhesive Clear Acrylic Pressure-Activated Ultra Removable Liner 90# (6.5+- 0.3) white Opacity High Gloss Level Matte Indoor Durability 2 Years S P E C I F I CAT I O N S Application This product is intended for use in high quality interior wall marking or decal applications requiring durability, flexibility, and low shrinkage and edge curl, e.g., wall decorations and point of purchase decals. Print Methods Compatible with Screen, Eco-Sol, Latex, Solvent, and UV-curable printing. Total Product Thickness 7.0 – 7.5 mils with adhesive Minimum Application Temperature +50° F. For lower application temperature requirements, ask your Catalina representative about our other specialty adhesives. Service Temperature Range 30° F To +140° F. Adhesion 15-25 oz/in Humidity Resistance Good Solvent Resistance Good for most lower aliphatic alcohols. For ultimate solvent resistance, edge sealing is recommended. Breathability ASTM-E96 certified to be “breathable” when used in accordance with recommended Wall Graphics application practices. Shelf Life Two (2) years when stored under conditions of 70°F and 50% relative humidity. Product Variations These products are available in both roll and sheet form. Available Colors White The above information on physical and chemical characteristics is based upon tests believed to be reliable. The values are intended only as a source of information. They are given without guarantee and do not constitute a warranty. The purchaser should independently determine, prior to use, the suitability of this material for his/her specific purpose. (Data represents averages and is not intended for use as a specification.) To order or request product samples, contact your local authorized dealer or call direct Customer Service 27001 Agoura Road Suite 100 Calabasas Hills California 91301 800-333-3136 or visit our websites: (818) 880-8060 (818) 880-1144 Phone: Fax: Atlanta Sales: Chicago Sales: E-mail: (800) 922-5880 (800) 766-4939 [email protected] CatalinaGraphicFilms.com MojaveDigitalMedia.com ©2015 Catalina Graphic Films, Inc. All rights reserved. Wall-Tex is a trademark of Catalina Graphic Films, Inc. All other trademarks are the property of their respective holders. 2015-02-10