Leather Craft Catalog - Tippmann Industrial Products, Inc.

TOLL FREE: 866-286-8046 • www.TippmannIndustrial.com
Become a fan of the
Tippmann “BOSS” on
facebook.com/TippmannBoss
View our other product lines @
Propane H a m m e r. c o m
Propane Powered Post Driving Equipment and Accessories
Tippma n n C l i c k e r. c o m
Air Powered Die Cutting Equipment and Accessories
TOLL FREE: 866-286-8046 • w w w. Ti p p m a n n I n d u s t r i a l . c o m
PRODUCTS
THE “BOSS”
Make..............................................................Tippmann
Model.................................................................... Boss
Type Feed.................................................. Needle Feed
Type Stitch.................................................. Lock Stitch
Type Bed.......................... Cylinder (Flat Bed Optional)
Stitch Cycle Rate.......................... 0 to 90 + Per Minute
Throat Depth........................................................... 6.5”
Pressor Foot Clearance............................................ 7/8”
Maximum Sewable Thickness................................ 3/4”
Needle System.................... 794 Series and 7 x 3 Series
Thread Sizes..................................................... 69 - 415
Stitch Adjuster......................................... 4 -16 per inch
Bobbin Winder................................................... Manual
Machine Weight................................................... 22 lbs.
The Tippmann “Boss” manual hand
stitcher sewing machine is designed to
sew leather and almost any other material
up to 3/4” thick, and will sew up to 90
stitches per minute.
The Boss needle-feed, lock stitch sewing
machine is designed and built to achieve
precision quality stitching, while offering
extreme durability.
Each pull of the “BOSS’S” heavy duty
handle completes a perfect lock stitch,
with fully adjustable stitch length.
Just raise the presser foot with the
squeeze grip and insert
your material. A simple pull
of the handle is all it takes to
start stitching. This machine
is hand operated and
requires no electricity.
THE
“BOSS”
14”
SPECIFICATIONS: THE “BOSS”
Hand Stitcher Sewing Machine
Sew Leather
up to 3/4” Thick
$1,495
Machine ships with:
All leather work on bike and garments was created using
Tippmann Leather Crafting Equipment.
1.
Tippmann Industrial Products, Inc. • 3518 Adams Center Rd. • Fort Wayne, IN 46806
• Assortment of 10 needles
• 1lb. spool of white thread
• 2 thread bobbins
• “BOSS” tool kit
• Instructional DVD
• Operators manual
Leasing Available
TO L L F R E E : 8 6 6 - 2 8 6 - 8 0 4 6 • w w w. Ti p p m a n n I n d u s t r i a l . c o m
2.
PRODUCTS
THE “BOSS”
Make..............................................................Tippmann
Model.................................................................... Boss
Type Feed.................................................. Needle Feed
Type Stitch.................................................. Lock Stitch
Type Bed.......................... Cylinder (Flat Bed Optional)
Stitch Cycle Rate.......................... 0 to 90 + Per Minute
Throat Depth........................................................... 6.5”
Pressor Foot Clearance............................................ 7/8”
Maximum Sewable Thickness................................ 3/4”
Needle System.................... 794 Series and 7 x 3 Series
Thread Sizes..................................................... 69 - 415
Stitch Adjuster......................................... 4 -16 per inch
Bobbin Winder................................................... Manual
Machine Weight................................................... 22 lbs.
The Tippmann “Boss” manual hand
stitcher sewing machine is designed to
sew leather and almost any other material
up to 3/4” thick, and will sew up to 90
stitches per minute.
The Boss needle-feed, lock stitch sewing
machine is designed and built to achieve
precision quality stitching, while offering
extreme durability.
Each pull of the “BOSS’S” heavy duty
handle completes a perfect lock stitch,
with fully adjustable stitch length.
Just raise the presser foot with the
squeeze grip and insert
your material. A simple pull
of the handle is all it takes to
start stitching. This machine
is hand operated and
requires no electricity.
THE
“BOSS”
14”
SPECIFICATIONS: THE “BOSS”
Hand Stitcher Sewing Machine
Sew Leather
up to 3/4” Thick
$1,495
Machine ships with:
All leather work on bike and garments was created using
Tippmann Leather Crafting Equipment.
1.
Tippmann Industrial Products, Inc. • 3518 Adams Center Rd. • Fort Wayne, IN 46806
• Assortment of 10 needles
• 1lb. spool of white thread
• 2 thread bobbins
• “BOSS” tool kit
• Instructional DVD
• Operators manual
Leasing Available
TO L L F R E E : 8 6 6 - 2 8 6 - 8 0 4 6 • w w w. Ti p p m a n n I n d u s t r i a l . c o m
2.
PRODUCTS
A.
A: Shows Embosser set up
for creasing.
B: Shows Embosser set up
for strap cutting.
C: Shows Embosser set up
for embossing.
B.
THE “EMBOSSER
Embossing / Creasing / Cutting Machine
The Tippmann Embosser is a hand operated
embossing, creasing and cutting machine.
This machine is built to achieve precision
embossing, creasing and cutting of leather.
Tippmann Industrial Products, Inc. has designed
the Embosser for extreme durability of the
machine itself and maximum owner satisfaction
for many years.
The Tippmann Embosser
is compatible with
McMillen, Weaver, Tandy
as well as other
embossing rolls from
various manufacturers.
SPECIFICATIONS: THE “EMBOSSER”
Make...................................................................Tippmann
Model................................................................. Embosser
Approximate Shipping Weight................................ 36 lbs.
Overall Dimensions......................... 20”W x 6”D x 9.5” H
Standard Embossing Die Size........ Outside Diameter 1.5”
Optional Embossing Die Size............Outside Diameter 2”
THE
“EMBOSSER”
$995
Creasing Rolls
EMBOSSER ACCESSORIES
A. DOUBLE CREASE:
We offer both single and double creasing roll sets in
a variety of sizes. You can mix and match, whether
you want a beveled or flat edge. (Single Crease is only
offered with a flat roller.) Items are available as
individual creasers, or in complete sets.
Sizes: 1/2” • 5/8” • 3/4” • 7/8” • 1” • 1 1/8” • 1 1/4” • 1 1/2”
$30
B. SINGLE CREASE
$30
Each Size
Each Size
A.
B.
$200
Complete set double crease: $200
Complete set single crease:
Embossing Rolls
Choose from a wide selection of embossing patterns
1” Morning Glory
$60.00 EM-44 1” Celtic
$60.00 EM-73 1” Braided Belt
$60.00
1”Chevron
$60.00 EM-43 1” Fish
$60.00 EM-72 3/4”Basket Weave
$60.00 EM-40A
1” Aztek
$60.00 EM-66
1” Kent
$60.00 EM-68 1” Southwest
$60.00
1” Yahoo
$60.00 EM-65
1” Great Outdoors
$60.00 EM-70
1 1/4” Basket Weave BRASS
1 1/2” Basket Weave BRASS
$10000
$100.00
1” Strawberry Patch
$60.00 EM-74
1” Eagle
$60.00 EM-48
1” Horsehead
$60.00 EM-47
1” Maple Leaf
$60.00 EM-46 1” Horses
$60.00 EM-77
1/4” Serpentine
$60.00
EM-41
1” Motoworks
$60.00 EM-71
$60.00 EM-69
1/2” Barbed Wire
$60.00
EM-78
1 1/4” Oak Leaf
$60.00 EM-45
EM-75
Machine ships with:
• 1/4” border embossing roll
• cutting blade
• 2 single line grooving rolls
• Set of 1” flat single edge
creasing rolls
• Set of 1” domed double edge
creasing rolls
• 2 allen wrenches
• Instructional DVD
• Operators manual
EM-67
EM-40B
EM-40C
9.5”
C.
Leasing Available
3.
Tippmann Industrial Products, Inc. • 3518 Adams Center Rd. • Fort Wayne, IN 46806
1” Flame
TO L L F R E E : 8 6 6 - 2 8 6 - 8 0 4 6 • w w w. Ti p p m a n n I n d u s t r i a l . c o m
4.
PRODUCTS
A.
A: Shows Embosser set up
for creasing.
B: Shows Embosser set up
for strap cutting.
C: Shows Embosser set up
for embossing.
B.
THE “EMBOSSER
Embossing / Creasing / Cutting Machine
The Tippmann Embosser is a hand operated
embossing, creasing and cutting machine.
This machine is built to achieve precision
embossing, creasing and cutting of leather.
Tippmann Industrial Products, Inc. has designed
the Embosser for extreme durability of the
machine itself and maximum owner satisfaction
for many years.
The Tippmann Embosser
is compatible with
McMillen, Weaver, Tandy
as well as other
embossing rolls from
various manufacturers.
SPECIFICATIONS: THE “EMBOSSER”
Make...................................................................Tippmann
Model................................................................. Embosser
Approximate Shipping Weight................................ 36 lbs.
Overall Dimensions......................... 20”W x 6”D x 9.5” H
Standard Embossing Die Size........ Outside Diameter 1.5”
Optional Embossing Die Size............Outside Diameter 2”
THE
“EMBOSSER”
$995
Creasing Rolls
EMBOSSER ACCESSORIES
A. DOUBLE CREASE:
We offer both single and double creasing roll sets in
a variety of sizes. You can mix and match, whether
you want a beveled or flat edge. (Single Crease is only
offered with a flat roller.) Items are available as
individual creasers, or in complete sets.
Sizes: 1/2” • 5/8” • 3/4” • 7/8” • 1” • 1 1/8” • 1 1/4” • 1 1/2”
$30
B. SINGLE CREASE
$30
Each Size
Each Size
A.
B.
$200
Complete set double crease: $200
Complete set single crease:
Embossing Rolls
Choose from a wide selection of embossing patterns
1” Morning Glory
$60.00 EM-44 1” Celtic
$60.00 EM-73 1” Braided Belt
$60.00
1”Chevron
$60.00 EM-43 1” Fish
$60.00 EM-72 3/4”Basket Weave
$60.00 EM-40A
1” Aztek
$60.00 EM-66
1” Kent
$60.00 EM-68 1” Southwest
$60.00
1” Yahoo
$60.00 EM-65
1” Great Outdoors
$60.00 EM-70
1 1/4” Basket Weave BRASS
1 1/2” Basket Weave BRASS
$10000
$100.00
1” Strawberry Patch
$60.00 EM-74
1” Eagle
$60.00 EM-48
1” Horsehead
$60.00 EM-47
1” Maple Leaf
$60.00 EM-46 1” Horses
$60.00 EM-77
1/4” Serpentine
$60.00
EM-41
1” Motoworks
$60.00 EM-71
$60.00 EM-69
1/2” Barbed Wire
$60.00
EM-78
1 1/4” Oak Leaf
$60.00 EM-45
EM-75
Machine ships with:
• 1/4” border embossing roll
• cutting blade
• 2 single line grooving rolls
• Set of 1” flat single edge
creasing rolls
• Set of 1” domed double edge
creasing rolls
• 2 allen wrenches
• Instructional DVD
• Operators manual
EM-67
EM-40B
EM-40C
9.5”
C.
Leasing Available
3.
Tippmann Industrial Products, Inc. • 3518 Adams Center Rd. • Fort Wayne, IN 46806
1” Flame
TO L L F R E E : 8 6 6 - 2 8 6 - 8 0 4 6 • w w w. Ti p p m a n n I n d u s t r i a l . c o m
4.
PRODUCTS
THE “CLICKER 1500”
SPECIFICATIONS:
“CLICKER 1500”
Make................................................. Tippmann
Model........................................ Clicker 15 Ton
Cutting Pressure.................................... 15 Ton
Cutting Beam.................................... 12” x 24”
Cutting Area........................ 11.875” x 23.875”
Common Die Height(‘s)............. .937” & 1.25”
Maximum Material Thickness................. .875”
Daylight..................................................... 2.5”
Approximate Shipping Weight............. 560 lbs.
Operating Pressure.......................... 80-110 PSI
Overall Dimensions....... 25”W x 20”D x 14”H
The Tippmann “Clicker” was originally
designed to cut leather, but is now used
to die cut all kinds of soft goods, with 3
different types of dies.
• Steel Rule Dies: Thin Blade Dies,
mounted in wood with ejection foam.
• Clicker Dies: Thick Blade Welded
Steel Dies. These die are unmounted.
• Forged Dies: Thick Blade Forged
Steel Dies. These dies are also unmounted.
* View more information on the different
dies on page 10 (Clicker Accessories).
THE “CLICKER 700”
CLICKER DIE CUTTING PRESSES
The Tippmann Line of “Clickers” offer powerful air-powered die cutting at the touch
of a button. These machines operate off of 80-110 psi (pounds per square inch) and
will die cut leather, fabric, gasket material, plastic, paper/card stock, etc.
These machines are compact in size, easy to operate and simple to maintain.
SPECIFICATIONS:
Clicker 700 & 1500
• No electricity or hydraulics
are required
• Side or front loading
• Compact Size
• Large Cutting Capacity
• Heavy duty cast iron “C”
frame construction
• Very low maintenance with
few moving parts
“CLICKER 700”
Make................................................. Tippmann
Model.......................................... Clicker 7 Ton
Cutting Pressure...................................... 7 Ton
Cutting Beam.................................... 12” x 12”
Cutting Area........................ 11.875” x 11.875”
Common Die Height(‘s)............. .937” & 1.25”
Maximum Material Thickness................. .875”
Daylight..................................................... 2.5”
Approximate Shipping Weight............. 260 lbs.
Operating Pressure.......................... 80-110 PSI
Overall Dimensions....... 12”W x 19”D x 13”H
24”
12”
12”
$3,200
Machine ships with:
Leasing Available
5.
”
12
• Manual
• Instructional DVD
Tippmann Industrial Products, Inc. • 3518 Adams Center Rd. • Fort Wayne, IN 46806
$1,650
Machine ships with:
• Manual
• Instructional DVD
Leasing Available
TO L L F R E E : 8 6 6 - 2 8 6 - 8 0 4 6 • w w w. Ti p p m a n n I n d u s t r i a l . c o m
6.
PRODUCTS
THE “CLICKER 1500”
SPECIFICATIONS:
“CLICKER 1500”
Make................................................. Tippmann
Model........................................ Clicker 15 Ton
Cutting Pressure.................................... 15 Ton
Cutting Beam.................................... 12” x 24”
Cutting Area........................ 11.875” x 23.875”
Common Die Height(‘s)............. .937” & 1.25”
Maximum Material Thickness................. .875”
Daylight..................................................... 2.5”
Approximate Shipping Weight............. 560 lbs.
Operating Pressure.......................... 80-110 PSI
Overall Dimensions....... 25”W x 20”D x 14”H
The Tippmann “Clicker” was originally
designed to cut leather, but is now used
to die cut all kinds of soft goods, with 3
different types of dies.
• Steel Rule Dies: Thin Blade Dies,
mounted in wood with ejection foam.
• Clicker Dies: Thick Blade Welded
Steel Dies. These die are unmounted.
• Forged Dies: Thick Blade Forged
Steel Dies. These dies are also unmounted.
* View more information on the different
dies on page 10 (Clicker Accessories).
THE “CLICKER 700”
CLICKER DIE CUTTING PRESSES
The Tippmann Line of “Clickers” offer powerful air-powered die cutting at the touch
of a button. These machines operate off of 80-110 psi (pounds per square inch) and
will die cut leather, fabric, gasket material, plastic, paper/card stock, etc.
These machines are compact in size, easy to operate and simple to maintain.
SPECIFICATIONS:
Clicker 700 & 1500
• No electricity or hydraulics
are required
• Side or front loading
• Compact Size
• Large Cutting Capacity
• Heavy duty cast iron “C”
frame construction
• Very low maintenance with
few moving parts
“CLICKER 700”
Make................................................. Tippmann
Model.......................................... Clicker 7 Ton
Cutting Pressure...................................... 7 Ton
Cutting Beam.................................... 12” x 12”
Cutting Area........................ 11.875” x 11.875”
Common Die Height(‘s)............. .937” & 1.25”
Maximum Material Thickness................. .875”
Daylight..................................................... 2.5”
Approximate Shipping Weight............. 260 lbs.
Operating Pressure.......................... 80-110 PSI
Overall Dimensions....... 12”W x 19”D x 13”H
24”
12”
12”
$3,200
Machine ships with:
Leasing Available
5.
”
12
• Manual
• Instructional DVD
Tippmann Industrial Products, Inc. • 3518 Adams Center Rd. • Fort Wayne, IN 46806
$1,650
Machine ships with:
• Manual
• Instructional DVD
Leasing Available
TO L L F R E E : 8 6 6 - 2 8 6 - 8 0 4 6 • w w w. Ti p p m a n n I n d u s t r i a l . c o m
6.
BOSS ACCESSORIES
BOSS ACCESSORIES
Part #SM 16-2
$37.00
Allows you to sew
close to right edge.
Left Presser Foot
Part #SM 16-4
$37.00
Commonly used in
boot and shoe production
and repair.
Nylon Thread
Tan
Natural
Needle 7 x 3 110..................................... $1.99
Needle 7 x 3 130..................................... $1.99
Needle 7 x 3 160..................................... $1.99
Needle 7 x 3 180..................................... $1.99
Needle 7 x 3 200..................................... $1.99
Needle 7 x 3 230..................................... $1.99
Needle 7 x 3 250..................................... $1.99
10 Pack of one size................................$12.99
Round point needles are used for non
leather applications.
See needle and thread guide pgs. 11-12
Black
Needle 794 S Serv 1 160..........................$1.99
Needle 794 S Serv 1 200..........................$1.99
Needle 794 S Serv 1 250..........................$1.99
10 Pack of one size................................$12.99
Chisel point needles are used in leather
crafting applications.
See needle and thread guide pgs. 11-12
White
Round Point 7 x 3 NEEDLES
Brown
Chisel Point 794 NEEDLES
Durable, bonded, high strength nylon thread.
Tippmann offers American Efird Thread in a
variety of colors and sizes.
Colors
Brown
Black
Natural
Tan
(White)
Sizes 1 lb. Spools
Z69
Z99
Z138
Z207
Z277
Z346
Z 415
Colors $30.80 Each
White $26.40 Each
If you need help determining which size and
type of needle and thread
you should use, view our
needle and thread guide on
pgs. 11-13
Wooden Cobblers Bench
Center Presser Foot
7.
Tippmann Industrial Products, Inc. • 3518 Adams Center Rd. • Fort Wayne, IN 46806
Part #SM-140
$37.00
Allows you to sew
close to left edge. This
foot is also referred to
as a zipper foot.
$19.99
Part #SM-141
$24.99
Dyno Silicone
Thread lubricant.
Thread lubricant
box for “BOSS”
Hand Stitcher.
Container Size:
1 Pint
Right Presser Foot
Part #SM 16-5
$37.00
Part #SM-59 Part #SM-52
$42.50
$5.00
Used with wool, fleece,
or any other material prone
to snagging.
Fleece and Padded
Material Foot
Thread Shuttle
SAVE:
BUY 4 GET 1 FREE
Steel Thread Bobbins
Part #SM-55
Part #CMG-1
$74.99
$119.99
Material Guide
Attachment
Stirrup
Attachment
• Raises the material off of
the needle plate.
• Allows you to guide
material around any shape.
• Allows user to sew into crevices.
• Insures consistent
stitching.
• Simple 1 bolt installation.
1 Bolt Installation
The Tippmann Cobblers Bench offers a sturdy work
surface for using the “BOSS” Hand Stitcher. Lightweight
and compact in size, this bench is ideal for any work shop.
Hand Crafted by local Amish Wood Workers.
• Simple to Assemble
• Attractive Addition to Any Work Shop
• Features Durable Steel Riser
Part #CHS 210
• Very Comfortable
$214.50
Part #SM 16-3
When not in use, simply
flip it out of the way.
Retractable
Part #CSM 38
Simple To Install
$135.00
Flat Bed
Attachment
• Allows user to sew
thin materials without
the material shifting
out of place.
• Includes material
guide, which flips
out of the way
when not in use.
TO L L F R E E : 8 6 6 - 2 8 6 - 8 0 4 6 • w w w. Ti p p m a n n I n d u s t r i a l . c o m
8.
BOSS ACCESSORIES
BOSS ACCESSORIES
Part #SM 16-2
$37.00
Allows you to sew
close to right edge.
Left Presser Foot
Part #SM 16-4
$37.00
Commonly used in
boot and shoe production
and repair.
Nylon Thread
Tan
Natural
Needle 7 x 3 110..................................... $1.99
Needle 7 x 3 130..................................... $1.99
Needle 7 x 3 160..................................... $1.99
Needle 7 x 3 180..................................... $1.99
Needle 7 x 3 200..................................... $1.99
Needle 7 x 3 230..................................... $1.99
Needle 7 x 3 250..................................... $1.99
10 Pack of one size................................$12.99
Round point needles are used for non
leather applications.
See needle and thread guide pgs. 11-12
Black
Needle 794 S Serv 1 160..........................$1.99
Needle 794 S Serv 1 200..........................$1.99
Needle 794 S Serv 1 250..........................$1.99
10 Pack of one size................................$12.99
Chisel point needles are used in leather
crafting applications.
See needle and thread guide pgs. 11-12
White
Round Point 7 x 3 NEEDLES
Brown
Chisel Point 794 NEEDLES
Durable, bonded, high strength nylon thread.
Tippmann offers American Efird Thread in a
variety of colors and sizes.
Colors
Brown
Black
Natural
Tan
(White)
Sizes 1 lb. Spools
Z69
Z99
Z138
Z207
Z277
Z346
Z 415
Colors $30.80 Each
White $26.40 Each
If you need help determining which size and
type of needle and thread
you should use, view our
needle and thread guide on
pgs. 11-13
Wooden Cobblers Bench
Center Presser Foot
7.
Tippmann Industrial Products, Inc. • 3518 Adams Center Rd. • Fort Wayne, IN 46806
Part #SM-140
$37.00
Allows you to sew
close to left edge. This
foot is also referred to
as a zipper foot.
$19.99
Part #SM-141
$24.99
Dyno Silicone
Thread lubricant.
Thread lubricant
box for “BOSS”
Hand Stitcher.
Container Size:
1 Pint
Right Presser Foot
Part #SM 16-5
$37.00
Part #SM-59 Part #SM-52
$42.50
$5.00
Used with wool, fleece,
or any other material prone
to snagging.
Fleece and Padded
Material Foot
Thread Shuttle
SAVE:
BUY 4 GET 1 FREE
Steel Thread Bobbins
Part #SM-55
Part #CMG-1
$74.99
$119.99
Material Guide
Attachment
Stirrup
Attachment
• Raises the material off of
the needle plate.
• Allows you to guide
material around any shape.
• Allows user to sew into crevices.
• Insures consistent
stitching.
• Simple 1 bolt installation.
1 Bolt Installation
The Tippmann Cobblers Bench offers a sturdy work
surface for using the “BOSS” Hand Stitcher. Lightweight
and compact in size, this bench is ideal for any work shop.
Hand Crafted by local Amish Wood Workers.
• Simple to Assemble
• Attractive Addition to Any Work Shop
• Features Durable Steel Riser
Part #CHS 210
• Very Comfortable
$214.50
Part #SM 16-3
When not in use, simply
flip it out of the way.
Retractable
Part #CSM 38
Simple To Install
$135.00
Flat Bed
Attachment
• Allows user to sew
thin materials without
the material shifting
out of place.
• Includes material
guide, which flips
out of the way
when not in use.
TO L L F R E E : 8 6 6 - 2 8 6 - 8 0 4 6 • w w w. Ti p p m a n n I n d u s t r i a l . c o m
8.
CLICKER ACCESSORIES
CLICKER ACCESSORIES
Clicker Stands
A.
The Clicker 700 and 1500 table
top surface line up perfectly
with the cutting deck, which allows you to slide the material in and out of the Clicker
with ease. These stands are constructed of heavy duty
steel with a wood table top surface.
A. Part #CCLK-50
CLICKER 1500 STAND
WITH TABLE TOP
• 48”W x 32”D x 35”H
B.
Clicker Dies
$450
C. Part #CL-100
C.
D.
$120
CLICKER STAND CASTERS (set of 4)
• You can turn your Tippmann Clicker Press into a
mobile workstation by adding easy glide casters to
your Clicker 700 Stand or your Clicker 1500 Stand.
These need to be ordered when purchasing your stand
D. Part #CCLK-34
$220
E. Part #CCl-33
$450
Die Specs
• 1 1/4” side face double bevel
Guidelines for price quoting:
B. Part #CL7-STAND $250
CLICKER 700 STAND
WITH TABLE TOP
• 32”W x 24”D x 35”H
• Casters sold separately
Tippmann Industrial offers a complete Clicker die service.
We will custom manufacture just about any Clicker die that
you can imagine. Speedy die service at a competitive price.
We can custom make
just about any die!
• Cost per linear inch • Cost per punch
• Cost per slit
• Cost per slot punch
• Minimum die charge
$2
$8
$10 (price may vary)
$30 (price may vary)
$50
In order to serve you, we can accept die patterns directly
through our web site www.TippmannIndustrial.com or you
can fax your pattern to: 260-441-8264
Delivery time depends on die compexity. Please specify due
date when ordering. Rush delivery is available.
SLIDE DECK (FOR THE CLICKER 1500)
• The slide deck allows you to slide the entire cutting
deck in and out of the machine in order to load the
material and the die. This will allow you to view the
exact location of your die and material when loading.
E.
AIR ACCUMULATOR SYSTEM
• Speed up your cycle time by adding an air accumulator system. This cost effective upgrade will cut your
cycle time in half. This system is available for
both the Clicker 700 and the
F.
Clicker 1500.
F. Part #CL-2H
TWO HAND ANTI-TIE DOWN
PALM CONTROLS
$650
• Gives a maintained output signal
if both the left and the right buttons
are pressed within .3 seconds and held.
Available for the Clicker 700 and
the Clicker 1500. (OSHA APROVED)
9.
Tippmann Industrial Products, Inc. • 3518 Adams Center Rd. • Fort Wayne, IN 46806
Clicker Dies may be single or double edged
and have a common height of 1.25”. These
welded steel dies are bent to a pattern to
match a customers sketch or drawing.
Depending on the type of material, Clicker
dies enable you cut through more than one
layer at a time. Clicker dies are similar to a
heavy duty cookie cutter.
Steel Rule Dies are thin blade
dies, mounted in wood or
various types of plastic. These
dies ordinarily have some type
of ejection foam and are usually
used to cut one layer at a time.
The common heights of a steel
rule die are .937 and .918
Forged High Dies are a type
of feed through clicker die,
made from 1.25” high single
edge stock. This type of die is
made so that the back of the die
is larger than the edge, allowing the cuts to easily move up
into the die, providing simple
removal of parts. This type of
die is ideal for cutting several
layers at one time.
TO L L F R E E : 8 6 6 - 2 8 6 - 8 0 4 6 • w w w. Ti p p m a n n I n d u s t r i a l . c o m
10.
CLICKER ACCESSORIES
CLICKER ACCESSORIES
Clicker Stands
A.
The Clicker 700 and 1500 table
top surface line up perfectly
with the cutting deck, which allows you to slide the material in and out of the Clicker
with ease. These stands are constructed of heavy duty
steel with a wood table top surface.
A. Part #CCLK-50
CLICKER 1500 STAND
WITH TABLE TOP
• 48”W x 32”D x 35”H
B.
Clicker Dies
$450
C. Part #CL-100
C.
D.
$120
CLICKER STAND CASTERS (set of 4)
• You can turn your Tippmann Clicker Press into a
mobile workstation by adding easy glide casters to
your Clicker 700 Stand or your Clicker 1500 Stand.
These need to be ordered when purchasing your stand
D. Part #CCLK-34
$220
E. Part #CCl-33
$450
Die Specs
• 1 1/4” side face double bevel
Guidelines for price quoting:
B. Part #CL7-STAND $250
CLICKER 700 STAND
WITH TABLE TOP
• 32”W x 24”D x 35”H
• Casters sold separately
Tippmann Industrial offers a complete Clicker die service.
We will custom manufacture just about any Clicker die that
you can imagine. Speedy die service at a competitive price.
We can custom make
just about any die!
• Cost per linear inch • Cost per punch
• Cost per slit
• Cost per slot punch
• Minimum die charge
$2
$8
$10 (price may vary)
$30 (price may vary)
$50
In order to serve you, we can accept die patterns directly
through our web site www.TippmannIndustrial.com or you
can fax your pattern to: 260-441-8264
Delivery time depends on die compexity. Please specify due
date when ordering. Rush delivery is available.
SLIDE DECK (FOR THE CLICKER 1500)
• The slide deck allows you to slide the entire cutting
deck in and out of the machine in order to load the
material and the die. This will allow you to view the
exact location of your die and material when loading.
E.
AIR ACCUMULATOR SYSTEM
• Speed up your cycle time by adding an air accumulator system. This cost effective upgrade will cut your
cycle time in half. This system is available for
both the Clicker 700 and the
F.
Clicker 1500.
F. Part #CL-2H
TWO HAND ANTI-TIE DOWN
PALM CONTROLS
$650
• Gives a maintained output signal
if both the left and the right buttons
are pressed within .3 seconds and held.
Available for the Clicker 700 and
the Clicker 1500. (OSHA APROVED)
9.
Tippmann Industrial Products, Inc. • 3518 Adams Center Rd. • Fort Wayne, IN 46806
Clicker Dies may be single or double edged
and have a common height of 1.25”. These
welded steel dies are bent to a pattern to
match a customers sketch or drawing.
Depending on the type of material, Clicker
dies enable you cut through more than one
layer at a time. Clicker dies are similar to a
heavy duty cookie cutter.
Steel Rule Dies are thin blade
dies, mounted in wood or
various types of plastic. These
dies ordinarily have some type
of ejection foam and are usually
used to cut one layer at a time.
The common heights of a steel
rule die are .937 and .918
Forged High Dies are a type
of feed through clicker die,
made from 1.25” high single
edge stock. This type of die is
made so that the back of the die
is larger than the edge, allowing the cuts to easily move up
into the die, providing simple
removal of parts. This type of
die is ideal for cutting several
layers at one time.
TO L L F R E E : 8 6 6 - 2 8 6 - 8 0 4 6 • w w w. Ti p p m a n n I n d u s t r i a l . c o m
10.
NEEDLE AND THREAD GUIDE
About Tippmann
Needles and Thread.
Tippmann offers quality needles at an
affordable price. Manufactured in Germany, Groz
Beckert has been offering the highest quality
standard in the industry since 1884. Tippmann
stocks over 5000 needles, so that you can be
assured that the needles you need, are available
and ready to ship.
NEEDLE AND THREAD GUIDE
Needle Identification
If you do not have your needle package, or if the kit provided with the
“BOSS” is open or has spilled, you may not know what type and size of
needle you have. In order to identify your needle, you will need a
magnifying glass or microscope. You will find a small inscription on
the side (shaft) of the needle (e.g. 230 / 26, as shown in the
illustration on the right. The first three numbers represent
the size of the needle you will need when
Experience the difference with American & Efird
thread, offered through Tippmann. Tippman has
replaced the Rice thread, offered through 2005,
with the finest quality thread on the market today,
American & Efrid.
After Rice shut down operations in 2005 we tested thread by several manufacturers, and the best
choice by far was American & Efird. Tippmann
is proud to distribute A & E thread and would be
happy to send you a free thread sample kit.
Selecting the Correct Needle
(Rule of Thumb)
After selecting desired thread and needle point, place
the thread through eye of needle and hold the thread
as pictured in image of left. Your hands should be
approximately 10 inches apart. If needle does not slide
freely down the thread, you will need to select a
larger needle.
ordering and the last two numbers represent the size of the
needle in metric.
Needle Inscription
Needle Size
110 / 16
7 x 3 110
130 / 21
7 x 3 130
160 / 23
7 x 3 160 or 794 160
180 / 24
7 x 3 180 or 794 180
200 / 25
7 x 3 200 or 794 200
230 / 26
7 x 3 230 or 794 230
230 / 27
7 x 3 250 or 794 250
Now that you know the size of your needle, you will need to determine whether it is a
round point or chisel point needle. A round point needle has a sharp point and the cross
section of the needle is round. A chisel point needle does not have a sharp point and the
cross section of the needle is not round, but arched.
(794) Chisel Point Needle
11.
Tippmann Industrial Products, Inc. • 3518 Adams Center Rd. • Fort Wayne, IN 46806
(7x3) Round Point Needle
TO L L F R E E : 8 6 6 - 2 8 6 - 8 0 4 6 • w w w. Ti p p m a n n I n d u s t r i a l . c o m
12.
NEEDLE AND THREAD GUIDE
About Tippmann
Needles and Thread.
Tippmann offers quality needles at an
affordable price. Manufactured in Germany, Groz
Beckert has been offering the highest quality
standard in the industry since 1884. Tippmann
stocks over 5000 needles, so that you can be
assured that the needles you need, are available
and ready to ship.
NEEDLE AND THREAD GUIDE
Needle Identification
If you do not have your needle package, or if the kit provided with the
“BOSS” is open or has spilled, you may not know what type and size of
needle you have. In order to identify your needle, you will need a
magnifying glass or microscope. You will find a small inscription on
the side (shaft) of the needle (e.g. 230 / 26, as shown in the
illustration on the right. The first three numbers represent
the size of the needle you will need when
Experience the difference with American & Efird
thread, offered through Tippmann. Tippman has
replaced the Rice thread, offered through 2005,
with the finest quality thread on the market today,
American & Efrid.
After Rice shut down operations in 2005 we tested thread by several manufacturers, and the best
choice by far was American & Efird. Tippmann
is proud to distribute A & E thread and would be
happy to send you a free thread sample kit.
Selecting the Correct Needle
(Rule of Thumb)
After selecting desired thread and needle point, place
the thread through eye of needle and hold the thread
as pictured in image of left. Your hands should be
approximately 10 inches apart. If needle does not slide
freely down the thread, you will need to select a
larger needle.
ordering and the last two numbers represent the size of the
needle in metric.
Needle Inscription
Needle Size
110 / 16
7 x 3 110
130 / 21
7 x 3 130
160 / 23
7 x 3 160 or 794 160
180 / 24
7 x 3 180 or 794 180
200 / 25
7 x 3 200 or 794 200
230 / 26
7 x 3 230 or 794 230
230 / 27
7 x 3 250 or 794 250
Now that you know the size of your needle, you will need to determine whether it is a
round point or chisel point needle. A round point needle has a sharp point and the cross
section of the needle is round. A chisel point needle does not have a sharp point and the
cross section of the needle is not round, but arched.
(794) Chisel Point Needle
11.
Tippmann Industrial Products, Inc. • 3518 Adams Center Rd. • Fort Wayne, IN 46806
(7x3) Round Point Needle
TO L L F R E E : 8 6 6 - 2 8 6 - 8 0 4 6 • w w w. Ti p p m a n n I n d u s t r i a l . c o m
12.
NEEDLE AND THREAD GUIDE
WEB SITE FEATURES
Round Point vs. Chisel Point
There are two differnt styles of needles to use when sewing with the Tippmann “BOSS”
Hand Stitcher. You can choose from chisel point or Round point as referred to in the
pictures below.
(794) Chisel Point Needle
(7x3) Round Point Needle
Round Point (7x3) needles are “universal” needles, and work well in just about any material,
including rubber, vinyl, cloth, leather etc.
Chisel Point (794) needles ared used specifically for leather. Instead of punching a hole in the
material like a round point, the Chisel Point (794) needle “slices” through the leather.
Slicing through the leather can help prevent bottom side “blowout” on dry hard leathers.
Chisel Point (794) needles are not recommended for woven fabrics such as nylon halters because
they tend slice the strands of nylon. If your style of sewing requires a short stitch length (10 per
inch or more), you should not use a chisel point (794) needle because the material can tear from
hole to hole. If sewing more than 10 stitches per inch, you would then want to use a Round Point
(7x3) needle.
Note: Change your needle to a round point needle when stitching fabrics other than leather.
TippmannIndustrial.com
Tippmann Industrial has one of the most useful, user
friendly web sites in the leather crafting industry.
Dennis Tippmann would like to invite you to view his
entire line as well as enjoy some the exciting features
on www.TippmannIndustrial.com
• Product and Accessories: View our entire line of
exciting, innovative leather crafting tools and accessories.
• Product Videos: We offer an extensive online product instructional and information
video library. These videos are available for online viewing as well as downloading.
• Part Finder: You can quickly view an interactive parts schematic for each machine in the
Tippmann Line. The products schematic section offers an exploded view as well as a detailed
description for each item.
• Needle and Thread Guide: Easy to follow guide lets you know which thread to use for
varying types of applications.
• Site Map: Quickly navigate around the Tippmann Industrial Site by clicking on the site
map link.
• Monthly Newsletter: Visit www.TippmannIndustrial.com to sign up for the Tippmann
monthly newsletter. Each month, the Tippmann Newsletter features a Tippmann Customer, as
well as a special offering for the month, along with a leather crafting tip or trick.
Enjoy these features, along with much....much more, by visiting us @
www.TippmannIndustrial.com
facebook.com/TippmannBoss
Tippmann Boss Facebook Page: Share your leather crafting stories and pictures. This new feature has replaced
the Tippmann Industrial Forum.
13.
Tippmann Industrial Products, Inc. • 3518 Adams Center Rd. • Fort Wayne, IN 46806
TO L L F R E E : 8 6 6 - 2 8 6 - 8 0 4 6 • w w w. Ti p p m a n n I n d u s t r i a l . c o m
14.
NEEDLE AND THREAD GUIDE
WEB SITE FEATURES
Round Point vs. Chisel Point
There are two differnt styles of needles to use when sewing with the Tippmann “BOSS”
Hand Stitcher. You can choose from chisel point or Round point as referred to in the
pictures below.
(794) Chisel Point Needle
(7x3) Round Point Needle
Round Point (7x3) needles are “universal” needles, and work well in just about any material,
including rubber, vinyl, cloth, leather etc.
Chisel Point (794) needles ared used specifically for leather. Instead of punching a hole in the
material like a round point, the Chisel Point (794) needle “slices” through the leather.
Slicing through the leather can help prevent bottom side “blowout” on dry hard leathers.
Chisel Point (794) needles are not recommended for woven fabrics such as nylon halters because
they tend slice the strands of nylon. If your style of sewing requires a short stitch length (10 per
inch or more), you should not use a chisel point (794) needle because the material can tear from
hole to hole. If sewing more than 10 stitches per inch, you would then want to use a Round Point
(7x3) needle.
Note: Change your needle to a round point needle when stitching fabrics other than leather.
TippmannIndustrial.com
Tippmann Industrial has one of the most useful, user
friendly web sites in the leather crafting industry.
Dennis Tippmann would like to invite you to view his
entire line as well as enjoy some the exciting features
on www.TippmannIndustrial.com
• Product and Accessories: View our entire line of
exciting, innovative leather crafting tools and accessories.
• Product Videos: We offer an extensive online product instructional and information
video library. These videos are available for online viewing as well as downloading.
• Part Finder: You can quickly view an interactive parts schematic for each machine in the
Tippmann Line. The products schematic section offers an exploded view as well as a detailed
description for each item.
• Needle and Thread Guide: Easy to follow guide lets you know which thread to use for
varying types of applications.
• Site Map: Quickly navigate around the Tippmann Industrial Site by clicking on the site
map link.
• Monthly Newsletter: Visit www.TippmannIndustrial.com to sign up for the Tippmann
monthly newsletter. Each month, the Tippmann Newsletter features a Tippmann Customer, as
well as a special offering for the month, along with a leather crafting tip or trick.
Enjoy these features, along with much....much more, by visiting us @
www.TippmannIndustrial.com
facebook.com/TippmannBoss
Tippmann Boss Facebook Page: Share your leather crafting stories and pictures. This new feature has replaced
the Tippmann Industrial Forum.
13.
Tippmann Industrial Products, Inc. • 3518 Adams Center Rd. • Fort Wayne, IN 46806
TO L L F R E E : 8 6 6 - 2 8 6 - 8 0 4 6 • w w w. Ti p p m a n n I n d u s t r i a l . c o m
14.
TOLL FREE: 866-286-8046 • www.TippmannIndustrial.com
Become a fan of the
Tippmann “BOSS” on
facebook.com/TippmannBoss
View our other product lines @
Propane H a m m e r. c o m
Propane Powered Post Driving Equipment and Accessories
Tippma n n C l i c k e r. c o m
Air Powered Die Cutting Equipment and Accessories
TOLL FREE: 866-286-8046 • w w w. Ti p p m a n n I n d u s t r i a l . c o m