MAX AGV Fork (FX) and Carrier (CX)

Automated Guided Vehicle (AGVs)
MAX AGV Fork (FX) and Carrier (CX)
The AGVs are fully automatic, extremely
accurate and safe. They handle all type of
loads without accidents or damage to the
goods.
MAX AGV handles the load either with forks or as a carrier. It has
fully automatic opportunity and maintenance charging.
MAX AGV navigates by laser or wire, driving with combinations
of single/dual drive, single/dual/eccentric steer.
Safety is one of the keywords for our AGVs. Speed dependent laser
bumper front and rear, side protection, load sensors, MP3 sound,
lights and buzzer are some of the safety features.
•Safe, Reliable & Robust
•Operational 24/7
•No Damage to Goods
•All Types of Loads
•Energy Saving
•Easy to Use & Maintain
•Flexibility & Freedom
The AGV is safe and reliable working close together with people
and infrastructure.
Return of investment is normally between one and two years.
www.maxagv.com
Soft Design is a leading turnkey AGV
supplier, with more than 20 years of AGV
system design experience.
The FX is a fork type that comes in 2 main models, FX15 and FX30,
depending on lift height and load weight. It can handle different size
of pallets and compatible loads.
The CX is a carrier type, handling pallets and many different types of
special loads.
Soft Design supplies
AGV systems for all
kinds of industries
around the world!
SPECIFICATIONS
Driving general
Max speed 1,5 m/s
Our AGVs mechanic, electrical and software are modular and
built from well tested and standardised parts ensuring quality and
robustness.
Single/dual drive, Single/dual/eccentric steer
Load handling
Max weight 10 ton, Max lift height 8 m
Positioning accuracy +/- 5 mm
MAX AGV has standard solutions for most type of common actuators
e.g. forklift, roller bed, chain conveyor, fork spread, side shift, table
lift, support legs.
Navigation
Laser navigation on 0,5m to 5 m height
Wire navigation (in floor)
Dead reckoning navigation
Electrical system
24 V or 48 V, Automatic charging or Manual charging
Battery type as required (lead/acid, Gel, NiCad)
Safety
Laser bumper in front/rear, Side protection, Fork safety
Audible warning Buzzer / MP3 sound, warning lamps
Environment
Working in temperature range -20°C to 45°C
”Declaration of Conformity“
Soft Design are successfully working in the
following industries:
- Automotive
- Newsprint
- Food & Beverage
- Pharmaceutical
- Warehouse
- Distribution Centres
- End of Line Production
- Manufacturing
Soft Design RTS AB Energigatan 10A, SE-434 37 Kungsbacka, Sweden
Phone: +46 (0)300 358 00 · Fax: +46 (0)300 358 10 · [email protected] · www.softdesign.se
© 2010 Soft Design RTS AB
CE certification is issued for each AGV,
specifying which directives this particular
vehicle complies with.