taim weser sea co. ltd

Transcription

Table of Contents
NO.
1
COMPANY
FOCUS AREA
ALGATECH SDN BHD
Energy, High Value Chemical, Eco-product, Bio-
PAGE
1
Remediation, CO2 Sequestration
2
APAVE MALAYSIA SDN BHD
Biomass Certification
4
3
AUTECH TRADE SDN BHD
Energy
6
4
BIOTECHNOLOGY DIVERSIFIED INDUSTRIES SDN BHD
Energy, High Value Chemical, Eco-product, Animal
7
Biofeed, BioMaterial
5
BIOTECH ALLIANCE INTERNATIONAL SDN BHD
Eco-Product
8
6
BUILDERS BIOMASS SDN BHD
Energy
10
7
CHE METAL WORKS SDN BHD
Oil and Gas, Energy, Waste Water and
12
Environmental Management, Biomass / Biofuel,
Pharmaceutical, Food and Beverages, Chemical
and Minerals, Fertiliser
8
CHRONOSPHERE ENGINEERING SDN BHD
Energy, High Value Chemical Biomass Briquette,
14
Pyrolysis Oil/ Bio-Oil
9
COMPOSITE TECHNOLOGY WOOD SDN BHD
Eco-Product, Building Material
16
10
CE TECHNOLOGY BERHAD
Energy
18
11
CENTURY TITAN SDN BHD
Eco-Product
20
12
DALAC MARINE ENGINEERING AND SERVICES SDN BHD
Eco-Product
21
13
DR COPP BIOF2 SDN BHD
Energy, High Value Chemical, Eco-product,
23
14
ECOGREEN BIOMASS SDN BHD
-
24
15
ENMARK (MALAYSIA) SDN BHD
Energy
24
16
EVERISE CRIMSON (MALAYSIA) SDN BHD
Eco-Product
25
17
FUTENCO
Energy
27
18
GEORGE KENT (MALAYSIA) BHD
Energy
28
19
GDF SUEZ
Energy
29
20
GREEN & SMART SDN BHD
Energy
30
21
GREENTREO SDN BHD
Energy
32
22
GLOBAL GATEWAY MOVERS AND FORWARDERS SDN BHD
Freight Forwarders
33
23
GREENEARTH (INTL) HOLDINGS SDN BHD
Eco-Product
34
24
HARIGOLD SDN BHD
Palm Kernel Shell
36
25
HEXGEN ENERGY CORP SDN BHD
-
37
26
HK KITARAN SDN BHD
Eco-Product
37
27
INDOCHINE BIO PLASTIQUES (ICBP) SDN BHD
Biodegradable & Biobased Resin & Finished
38
Process Equipment for Eco-Product
Products
28
IPALM (MALAYSIA) SDN BHD
Energy, Eco-Product
40
29
IRIS ECO POWER SDN BHD
Energy, Eco-Product
41
30
KONSULTANT PROSES SDN BHD
-
42
31
KASTRACO ENGINEERING (M) SDN BHD
Energy
43
i
32
MAGENKO RENEWABLES (ASIA) SDN BHD
Energy
44
33
MALAKOFF CORPORATION BERHAD
Water
46
34
MASTER JAYA ENVIRONMENTAL SDN BHD
Air pollution Control & Industrial Equipment and
47
35
MILLENNIUM PARTNERS (M) SDN BHD
High Value Chemical
49
36
MYAGRI NUTRIBIO SDN BHD
Agro-Biotech
50
37
NGAN & NGAN HOLDINGS SDN BHD
-
51
38
NEXUS MARITIME (M) SDN BHD
Energy
52
39
OSK INVESTMENT BANK
Financial, Advisory and Investment Services
53
40
PAHANG BIODIESEL CORPORATION SDN BHD
-
54
41
PJI HOLDINGS BERHAD
Property Development and Various Engineering
55
System
Activities
42
POIC SABAH SDN BHD
Palm Oil and Biomass
57
43
PROMISE EARTH (M) SDN BHD
Eco-Product
58
44
PZ BIO ENERGY SDN BHD
Energy, Eco-product, Bio Fuel-Diesel
61
45
RONSER BIO-TECH SDN BHD
Energy, Eco-Product
64
46
RUBBERFLEX SDN BHD
Energy
65
47
SJ SECURITIES SDN BHD
Consultancy, M & A
66
48
SP MULTITECH RENEWABLE ENERGY SDN BHD
Energy, Eco-product, Biogas Plant Development
67
49
SYARIKAT KAMAJU SDN BHD
Energy, Bioethanol from Molasses (Biofuel)
69
50
SAWIPAC SDN BHD
Energy, Eco-Product
71
51
TC ENERGY RESOURCES
Palm Oil Products
72
52
TCOM POWER SDN BHD
Energy, Telecommunication
73
TAIM WESER SEA CO. LTD
Energy, Eco-product, Material Handling
53
Equipments
74
76
54
VATA VM SYNERGY (M) SDN BHD
Eco-Product
55
WARIS NOVE SDN BHD
High Value Chemical
78
56
WEIMAR ENTERPRISE SDN BHD
De-Compositing System for the Organic Waste
80
ii
Algaetech Sdn Bhd
Focus Area: Energy, High Value Chemical, Eco-product, Bio-Remediation, CO2 Sequestration
Organisation Profile:
Algaetech International Sendirian Berhad (Sdn. Bhd.) is a Malaysia-based company whose activities are
in the field of micro algal research, development and consultancy, as well as the production and
marketing of renewable energy and high value products.
Algaetech began the algal research in 2004 and has been awarded grants by the Malaysian Government
for its algal research projects into renewable energy and high value functional foods. Algaetech’s
researchers and consultants actively pursue algal research and development projects that directly
contribute towards the commercialization of algal products and technologies in order to build a socially
responsible, successful and profitable business. Algaetech intends to be a turn-key company in algal
technology and our focus is to provide start-to-end algae based technology services in order to provide
clients with solutions and products such as mitigation of carbon dioxide (CO2) emissions, wastewater and
sewage treatment, health foods and bio-diesel.
Throughout the years, Algaetech has established itself as a pioneer and leader of algae technology, and
aims to become a premier producer and supplier of algae biomass for commercial and industrial
requirements. Algaetech also provides the green technology solution which can contribute to the human
health and a greener world.
Potential Business and Environmental Collaboration to Offer/Request:
Products:
All of ASB’s products are made out of 100% natural and non-genetically manipulated microalgae at the
Algaetech Production Centers in Malaysia, Brunei, Indonesia and Thailand. The products and production
centers are of Halal and GMP standards, and in compliance with all international health and safety
regulatory rules.
•
Algae Biomass, Algae Cake and Algae Powder for
o Haematoccocus
o Spirulina
o Nannochloropsis
o Chlorella
o Tetraselmis
o Dunalliela
•
End-Products - PREMIA ™ Product Line : products made for human consumption out of all
natural products to promote a balanced and healthy lifestyle
o PREMIA Spirulina-Ex
o PREMIA Protein Bar
o PREMIA Cereals
o PREMIA Herbal Tea and Slimming Tea
o Biscuits & Snacks
1
•
Value-Added Products and High Value Products
o Natural Astaxanthin
o C-Phycocyanin
o Bio-Fertilizers
o Pharmaceuticals
o Nutraceuticals
Services:
ASB offers customized services and solutions for the implementation of algae technology. This is an
orchestration between the biological, technical and business experts to offer a full and complete
beginning-to-end process for algae cultivation and production.
•
•
•
Research & Development and Consultation Services
o Feasibility Study
o Algae Identification and Analysis
o Development of Pilot Projects
o Laboratory and Training Services
Technology Provider
o Algae Integrated Management System (AIMSys)
o CO2 Sequestration technology
o Renewable Energy
Biomass
Biogas
Bio Fuels
o Bio-Remediation
Waste Water Treatment
Palm Oil Mill Effluent (POME) Treatment
Project Development and Implementation
o Creation of business plan
o Building of plant
o Operating of plant
Algaetech is seeking funding or financial partners to enhance its Research & Development scopes,
through the acquirement of new laboratory equipment and technologies to nurture and stimulate
development and offers very niche opportunities to identify key research areas. This research would be
further implemented in the scale up of technology and projects to increase and improve the output of
algae for commercialization.
2
Organisation's Achievements:
•
•
•
•
•
•
•
•
•
Awarded a research grant by the Ministry of Science, Technology and Innovation (MOSTI) for the
research in Bio-Fuel from Algae
Leads the research and development in the production of Bio-Jet Fuel from algae projects from
the Aerospace Malaysia Innovation Centre (AMIC) and the European Aeronautics, Space, and
Defense Company (EADS).
Algaetech is a turn-key contractor and technology provider for the Malaysian Integrated Algae
Valley, the largest algae farm for bio-diesel in the world;
Algaetech was awarded the Frost & Sullivan 2011 Best Practice Award “Asia Pacific Green
Excellence Award for Service Innovation in Algae Technology”;
Algaetech designed, developed and implemented the “Algae Integrated Management System
(AIMSys), an end-to-end process for microalgae cultivation featuring combination of biological
and high technology system for algae and currently the largest photo bioreactor in the world for
nannochloropsis;
Main consultant and collaboration partners for algae projects with global blue-chip companies,
including TATA Power Company Ltd and Indah Water Konsortium (IWK);
Exclusive partner for research and development in microalgae and algae technology with the
National University of Malaysia (UKM);
Recognized to be in the top 100 Small – Medium Enterprises in Malaysia in 2011 by SME
Magazine;
Recipient of the 2011 SME 100 Award, for Small Medium Enterprise - New Business Invention.
We Offer: Contract Manufacturing, Import/ Export, Management Contract, Marketing Service, Trading of
Carbon Credit, Contract Research, Commercialisation of R & D, Joint R & D ,Proprietary Consultanc,
Technical Assistance, Technology Acquisition, Technology Licensing, Technology Transfer, CDM
Development, CDM Development
We Request: Collaboration of Public Procurement, Distributorship/ Agency, Global Product Sourcing,
Joint Production, Joint Venture, Resellership, Green Procurement, Foreign Direct Investment (FDI),
Merger and Acquisition, Project Financing, Venture Capital
Number of Staff: 40
Annual Business Turnover (€):< 2 million
Contact Person(s):
Syed Isa Syed Alwi, Chief Executive Officer
3
APAVE MALAYSIA SDN BHD
Focus Area: Biomass Certification
APAVE Malaysia, a member of APAVE Group from France that was founded in 1867 – an international
leading organization specializes in the risk control business and provides a complete range of technical
and intellectual services in the areas of inspections, assistance, buildings, tests & measurements,
certification, training and consulting. All are designed to enhance the safety of people and property, and
optimize the performance of organizations with a team of 9,600 risk management professionals, including
7000 engineers and technicians undertaking the mission of trust daily for our clients in Europe, Asia, the
Middle East, the Indian Ocean and Africa.
1. Inspection and Technical Assistance – Energy and fluids, Mechanical equipment, Pressure
Equipment, Transport of dangerous goods, Fire prevention, Electrical installation, Waves and
radiation.
2. Construction and Civil Engineering – Industrial, public and commercial buildings, Historical
monuments, Housing, Temporary construction, Civil engineering works.
3. Testing and Measurement Laboratories – Chemical analysis, Environmental analysis, Industrial
hygiene, Product evaluation, Industrial water, Metrology, Material metallurgy
4. Training – Design-construction installation, Operator-production-maintenance, Training
engineering and skills, Safety of people and property, Management organization.
5. Technical Assistance – Environmental protection, Quality and management, Food safety, Human
safety, Healthcare safety and quality, Added value and performance
6. Certification – ISO9001, ISO14001, ISO/TS16949, ISO13485, OHSAS18001, ISO27001,
ISO22000, AS9100, SA8000, HACCP, CE Mark, NF Mark, Biomass, Energy Management,
Carbon Footprint, etc.
Sustainable Biomass Certification to ISCC (International Sustainability and Carbon Certification)
Scheme by GUTCert/ Germany (Accredited Certification Body)
Renewable Energies are becoming increasingly important around the world. Climate change and
resource scarcity are the only two arguments to promote the generation of energy from renewable.
The European Union (EU) has published a directive on renewable energies (2009/28/EC) in 2009 and
thereby sets a worldwide trend. With this directive the EU intends to promote the generation of energy
from Biomass, among others by targeting a proportion of 20% biomass use for total energy production in
2020 and a 10% share of biofuels in the transport sector for the same year.
In that respect biomass has become an important resource for renewable energy production worldwide,
especially within the EU. Its market relevance will continue to grow strongly in the future. It provides an
environmentally-friendly alternative to fossil energy resources, contributing to the reduction of carbon
emissions and protecting the climate.
The trend for sustainable biomass generation has been set within the energy and biofuel sector. Also in
other areas (such as cosmetics and the food industry) this topic increasingly gains importance.
Furthermore, the air traffic might demand large amounts of biofuel in near future as the aviation sector will
be included in the emissions trading system of the EU in 2013.
4
The demand for sustainably produced biomass will intensively increase within the next years which will be
reflected in the pricing. First studies on price development of biomass show that prices for sustainable
palm oil are already 25-30€ higher than the conventional palm oil, whereas the certification costs are
being expected to stay below 3-10% of this price, depending on the overall amount to be certified. Thus, it
is highly attractive to get sustainable grown biomass certified and sell it as that on the international,
especially the EU market.
Target sectors:
1. The whole Supply chain of Biomass and biofuel [Farm/Plantation owner (oil palm, corn, Jetropha,
sugarcane, etc) – Oil Mill – warehouse – Conversion Unit – Refinery/Biodiesel plant - transporter]
2. Other Biomass and Biofuel players like Importer, Exporter, Trader.
1. APAVE Malaysia working with AFNOR/France (One of the Top Certification Body), has certified
and issued several hundred ISO certificates (ISO9001, ISO14001, ISO/TS16949, ISO13485,
OHSAS18001, ISO27001, ISO15001) to diversify sector of customers.
2. Since 2010 till 2011, GUTCert has issued total of 185 certificates and statement of Conformities
to Farms, First gathering point, Oil Mill/Refinery/Conversion unit, Biogas plant, Supplier and
Trader for Biomass.
3. APAVE/GUTCert jointly provides Biomass Certification (ISCC Scheme) in Malaysia, Indonesia,
Singapore and other surrounding countries. We have certified 1 warehouse and in the process to
certify 14 plantations, 9000 smallholders, 6 oil mills, 3 operating offices and 1 warehouse.
We Offer: Technical Assistance, Biomass Certification Service to ISCC Scheme
Number of Staff: 10
Annual Business Turnover (€): 380,000
Contact Person(s):
K W Leong, Managing Director
Steve Cheong, Business Consultant
5
AUTECH TRADE SDN BHD
Focus Area: Energy
Number of Staff: 8
Annual Business Turnover (€): 2000000
Contact Person(s):
Tashrul Talib, Managing Director
Zul Akmal Adnan, Executive Director
* Updated Business Collaboration Profile will be provided in the next edition.
6
Biotechnology Diversified Industries Sdn Bhd
Focus Area: Energy, High Value Chemical, Eco-product, Animal Biofeed, BioMaterial
Our company’s policy for doing business is to produce safe and quality products that are consistent with
customers’ requirements and regulatory standards. Our company also strives for continuous quality
improvement and cost effectiveness through excellent managed operations that cause less stress on the
environment. We are in the process of establishing an efficient and effective environmental management
system (EMS) ISO 14001 and also increased employee awareness and understanding of global
environmental issues.
The potential collaborators which we seek could be as follow:i) established manufacturers who have the operation and management expertise/experience; or
ii) established machinery/equipment fabricators; or
iii) established research institutes with the technology and operation know-how; or
iv) others that can contribute to our project
Some of our company’s achievements are as follow:
Recipient of TechnoFund Grant in 2007 from Ministry of Science, Technology & Innovation (MOSTI)
- with this partial financial assistance from MOSTI’s TechnoFund grant, we successfully set-up a pilotscale plant to carry out trial production of value-added products that utilizes locally available raw
material-Sago starch as feedstock
Recipient of BioNexus Status in 2011 from Malaysian Biotechnology Corporation Sdn Bhd (BiotechCorp)
- the BioNexus Status entitled our company to have special tax exemptions
Recipient of financial assistance in the implementation of ISO14001 under EU-BEMP managed by
Biomass-SP
- this financial assistance helped our company to implement ISO14001 quality system into our
manufacturing activities
We Offer: Contract Manufacturing, Distributorship/ Agency, Import/ Export, Joint Production, Joint
Venture, Trading of Carbon Credit , Green Procurement , CDM Development , Commercialisation of R &
D, Contract Research, Joint R & D, Proprietary Consultancy, Technical Assistance, Technology
Acquisition, Technology Licensing, Technology Transfer, CDM Development
We Request: Distributorship/ Agency, Import/ Export, Joint Production, Joint Venture, Trading of Carbon
Credit , Green Procurement , CDM Development , Commercialisation of R & D, Contract Research, Joint
R & D , Proprietary Consultancy , Technical Assistance , Technology Acquisition , Technology Licensing ,
Technology Transfer , CDM Development , Global Product Sourcing
Number of Staff: 15
Annual Business Turnover (€):1.0 - 2.0milion
Contact Person(s):
Ho Bee, Ivan, Chief Executive Office
Lim Wee Loo, Assistant General Manager
7
BIOTECH ALLIANCE INTERNATIONAL SDN BHD
Focus Area: Eco-product
Biotech Alliance International Sdn. Bhd. (hereinafter referred to as BAI) offers an outright purchase for a
waste management system, namely the technology transfer of BAI’s integrated biogas and BAIGUS™
Advance Furrow Composting System. BAI is capable of designing any waste management projects
according to the needs and budget of the project entity and is therefore in a unique position to transfer
their environmental friendly process in the form of an EPCC package involving engineering, procurement,
construction, and commissioning.
Our composting technology was derived from Australia but the Founder of BAI has since modified this
technology to suit the local tropical environment and developed, through its R&D, a Palm Waste
Management System. The use of a cocktail of locally cultured decomposting and lignolytic inoculums
designed by BAI’s consultant microbiologist has also been incorporated into the waste management
system to accelerate the decomposting process.
Besides, we also possess soil enhancement microorganisms (nitrogen fixer, phosphate solubilisers and
zinc holder) which can be value added to the organic compost to qualify product as a bio-fertiliser.
We also possess bio-fungicide (Trichoderma) which acts as an efficient biological control agent for the
treatment of several soil pathogenic fungi & suppression of various disease causing fungal pathogens.
Product
: Explore overseas market for the green product that we recycle from the biomass.
Technologies: We are an R&D company possessing the unique technological system, process & control
in the bioremediation of palm oil mill wastes & their downstream activities. We possess
vast experience not only in addressing the problems of the above but we are capable of
breaking down any biodegradable wastes & turn them into a useful product for multipurpose usage. We are very innovative & are interested to collaborate or hold hand with
any technological partners to further develop the biotechnology business.
YEAR
January 2008
ACHIEVEMENTS
Company being awarded BioNexus Status by Malaysia Biotech Corporation which
the company can enjoy tax exemption for 10 years.
December 2008
Company being awarded Seed Fund Grant of RM 2.5 mil by Malaysia Biotech
Corporation to improve the R&D laboratory
February 2009
Collaboration with Swinburne University Sarawak Campus for the R&D of our
composting technology
October 2009
The company Chief Executive Officer had been invited to do a presentation for the
BioCamp 2009
8
February 2010
Completed Tian Siang Composting Project which is a Clean Development
Mechanism (CDM) project
September 2010
The company participated in POMREQ 2010 and won 3 prize in BEST
DECORATED BOOTH
October 2010
Completed Trolak Composting Project which is a Clean Development Mechanism
(CDM) project
November 2010
The company’s technology has won a Gold Medal Award in BioInno Award during
BioMalaysia 2010
rd
We Offer: Commercialisation of R & D Technology Transfer
We Request: Contract Manufacturing, Distributorship/ Agency, Import/ Export, Joint Production, Joint
Venture, Marketing Service, Foreign Direct Investment (FDI), Merger and Acquisition, Project Financing
Number of Staff: 13
Annual Business Turnover (€): 1 million
Contact Person(s):
Shirley Koh, Chief Executive Officer
9
BUILDERS BIOMASS SDN BHD
Focus Area: Energy
Organisation Profile: Builders Biomass, part of the Builders Corporation Group, is an energy provider
and specializes in the production of solid biofuel for power generation as a form of renewable energy.
Leveraging on local biomass feedstock, Builders Biomass's proprietary technology converts biomass
residues into solid biofuel in the form of high-energy fuel pellets under the trademark BiOEn. Builders
Biomass's technology also enables different varieties of biomass residues to be pelletized, hence creating
novel innovative products utilizing different composition of biomass residues to produce the highest
biological efficiency for different purposes. The award-winning BiOEn solid biofuel pellets are a perfect
clean fuel for co-firing in power plants, cogeneration, and boilers for industrial users and for domestic
residential heating. BiOEn is high in calorific value, density and mechanical durability as well as low in
moisture and ash content. Quality control is at the heart of the whole production process. Its state-of-theart manufacturing facilities coupled with stringent quality management systems ensure continuously
consistent quality and quantity throughout the entire production chain as well as timely delivery of exports
to the destination. Combustion time of BiOEn pellets is longer and there is zero wastage, hence is cost
effective for users. As for its services division, Builders Biomass provides EPC for biomass production
plants, licenses its technology, operates and maintains the plants, and supplies steam using clean
energy.
The core competencies and competitive advantages of Builders Biomass can be summarized as follows:
1.
Builders Biomass is in a strong, stable and reliable position to supply consistent quality and
quantity of biomass pellets up to 120,000MT per annum for long-term contracts.
2.
Builders Biomass possesses advanced manufacturing skills together with engineering precision
with superior knowledge in the science and art of pelletizing of Malaysia varied biomass residues.
3.
Builders Biomass understands and satisfies the requirements of customers for consistent quality
of pellets right up to the appropriate type of packaging involved.
4.
Builders Biomass has in-depth logistics knowledge, covering transportation from its facilities
including loading, unloading and receiving facilities.
5.
Builders Biomass has in-depth understanding of business practices in the energy feedstock
business and truly understands the whole biomass pellets industry.
6.
Builders Biomass is fully appraised of world market dynamics of supply and demand, biomass
pellets movement, Governmental mandates, policies and Governmental intervention.
With the above, Builders Biomass is open to mutual business opportunities with organizations who are
interested in synergistic cooperation in terms of products, services, projects, technologies and/or finance.
This ranges from the offering of our products and/or services as well as requests that are relevant to our
business.
10
Organisation's Achievements: Builders Biomass is the first solid biofuel producer in the world to be
certified to ISO9001:2008 and ISO14001:2004 standards. The ISO certification assures compliance to
international standards on the quality of its production as well as the impact to the environment. Hence,
whilst attention is duly given to the guarantee of consistent product quality, at the same time its business
and production process complies with a world-class environmental management system.
Builders Biomass is professionally managed, fully licensed by the Malaysian Government with Pioneer
Status and is an Honouree of the European Union-Malaysia Biomass Entrepreneurs Nurturing
Programme. Builders Biomass’s patent pending proprietary technology is energy efficient and produces
zero wastage. Any excessive feedstock from the process will be recycled back in the technological
process.
Builders Biomass has gained significant international recognitions and has achieved corporate milestones
throughout its journey. Most recently, Builders Biomass has won the prestigious 2011 Asia Pacific
International Entrepreneur Excellence Award for the category of “Excellence Emerging Entrepreneur” and
“Product Excellence” awarded by the Minister in the Prime Minister’s Department, Malaysia. Builders
Biomass takes pride in being the only green organization to have won these awards and has been
selected over hundreds of nominated shortlisted companies.
The President and Chairman of Builders Biomass are internationally recognized as leaders in this field.
International conference organizers and world energy publications constantly seek them out. The
President and Chairman are regularly invited to speak at international conferences as well as contribution
nd
to publications. The Chairman has presented a paper at the 2 Biomass Pellets Trade Asia in Seoul,
Korea in September 2011 and more recently at the Bioenergy International Asia Expo & Conference in
December 2011. The article titled “Seeing the Wood through the Trees” in the December 2011 edition of
Bioenergy Insight showcases the President’s views on a holistic outlook of the biomass pellets industry in
Asia.
We Offer: Contract Manufacturing, Import/ Export, Joint Production, Joint Venture Management
Contract, Foreign Direct Investment (FDI), Merger and Acquisition, Project Financing, Venture Capital,
Joint R & D, Proprietary Consultancy, Technical Assistance, Technology Acquisition, Technology
Licensing, Technology Transfer
We Request: Collaboration of Public Procurement, Contract Manufacturing, Distributorship/ Agency,
Global Product Sourcing, Import/ Export, Joint Production, Joint Venture, Marketing Service, Joint R & D,
Proprietary Consultancy, Technical Assistance, Technology Acquisition, Technology Transfer, Foreign
Direct Investment (FDI), Merger and Acquisition, Project Financing, Venture Capital
Number of Staff: 33
Annual Business Turnover (€): More than 1 Million
Contact Person(s):
Dato’ Zakri Abdullah Kuah, President & CEO
Ms. Ooi Suan Kim, Chairman
Mr. Ooi Diang Ling, General Manager
11
CHE METAL WORKS SDN BHD
CHE was incorporated in 1991 and our service has been recognized as premium fabricator in the market.
To list some of our manufacturing facilities:
CNC Laser Cutting I High Definition 3D Auto Plasma |Automatic Welding | Orbital Welding | Precision
Machining Center
CHE manufacture wide ranges of Industrial Processing Equipments and we are also serving the
industries as:
• Equipment Manufacturer (OEM or CEM)
• Turn-key Project
• Fabrication Service
The industries that we are serving are:
Oil & Gas | Oil & Fats | Refineries | Oleochemical | Food & Beverages | Chemical | Petrochemical |
Ingredient | Mineral | Fertiliser, Agri, Agro | Pharmaceutical | Power Plant | Palm Oil Mill | Environmental
Pollution Control | Waste Water Treatment | Biomass / Biofuel | Renewable Energy
Organisation's Role and Main Activities (Products & Services):
CHE is in the process of providing new service to our existing customers and we have been investing
extensively into our Equipments Manufacturing Plant. With so many years of doing business with
European and American companies serving as quality fabricators, CHE has therefore exposed to the
international standard of manufacturing. Our customers are mainly operating regionally namely
Singapore, Malaysia, Thailand, Indonesia and Vietnam.
For local, renewable energy business will need to inject with advanced and efficient technologies and
therefore CHE objective is to provide advanced European technologies being locally manufactured to
provide local affordable price.
CHE being a premium fabricator for the past 20 years, our local market positioning enable us to deliver
our services without prioritising price as competing factor. With our operating manufacturing facility in
Malaysia, we have the advantage of allowing customers to visit our factory and witnessing our
manufacturing setup, and thus giving confidence to our customers that we can deliver a value for money
and local affordable products. As the local market always have the impression that European
Technologies are too costly to implement, CHE will now be able to convince the market that the
technologies from Europe now can be affordable.
We intend to market and provide Green Energy Technology Solution to our customers and we are
seeking for strategic business collaborator of advanced technologies companies from Europe to
synergise. It is our pleasure to present to you our proposal for strategic business collaboration:
a)
b)
c)
d)
e)
f)
g)
h)
i)
CHE will promote Collaborator’s Technologies to our clients.
CHE will present our Collaborator’s Technologies during participation in exhibition
CHE will support Collaborator to localize their product fabrication for cost effectiveness.
CHE to serve as Original Equipment Manufacturer or Contract Equipment Manufacturer.
CHE will share existing customers within the region mentioned.
CHE will joint develop technologies to process local available Biomass.
CHE will support Collaborator to set up local pilot plant to run product trial.
CHE will set up Authorised Service Center for our Collaborator in sales service.
CHE will build up Spare Parts Inventories to support the market.
12
j) CHE will support Collaborator to create regional strategic distribution network.
k) CHE will assist to follow up with Collaborator’s customers available within the region.
l) Collaborator can bring along with their customers for Factory visit and if in case Collaborators is
not present, CHE can make arrangement for the factory visit.
Our Core Competency – Pressurised Processing Equipment Manufacturing
• ISO 9001 2008 UKAS Moody International Certification
•
Authorised Malaysia Licensed Pressure Vessel Manufacturer, DOSH JKKP, Reg. No : BT21/ 519
•
Authorised ASME Stamp Holder, ASME ‘U’ (Cert No 41130) & ‘R’(Cert No R-8374) Stamp
•
Malaysia Licensed Manufacturing Warehousing Certification
•
JPK Malaysia, National Departmental Of Skill Development Certification
•
ANSI-ASQ National Accreditation Board
•
BIOMASS SP Certification
Number of Staff: 145
Annual Business Turnover (€): 2.5 Million
We Offer: Contract Manufacturing, Marketing Service
We Request: Distributorship/ Agency, Commercialization of R&D, Contract Research, Joint R&D,
Proprietary Consultancy, Technical Assistance, Technology Acquisition, Technology Licensing,
Technology Transfer, CDM Development.
Contact Person(s):
Chek CC Chong, Business Director
13
CHRONOSPHERE ENGINEERING SDN BHD
Focus Area: Energy, High Value Chemical Biomass Briquette, Pyrolysis Oil/ Bio-Oil
Incorporated
: 2006
Company
: Private Limited / SME
Core Business :
1) Telco Engineering & Consultancy Services
2) Engineering, Consultancy & EPCM Services in the Field of Renewable & Alternative Energy
3) Producers of Biomass Briquette & Bio-Oil
4) R&D Works in Biomass to Energy
Key Personnel Specialization/ Experience;
ENERGY
– Power Plant Projects (Coal Fired/ Gas Fired/ Mini Hydro)
TELCO SERVICES
– Field work Services (Network Optimization/ Benchmarking/ Engineering)
OFFER :
(AA) IMPORT/ EXPORT
- Exporting RAW Biomass or Densified Biomass & Bi-Oil for EU market (Power Generation &
Industry).
(BB) JOINT R&D
- Execute research on the actual volume of potential LOCAL biomass & related properties.
- Execute feasibility studies for any EU investors that wish to develop biomass related projects in
Malaysia.
(CC) GLOBAL PRODUCT SOURCING
- As an outsource agent for any biomass resources within ASEAN for EU buyers/ traders.
REQUEST:
(AA) DISTRIBUTORSHIP/ AGENCY
- Products
(1) Gasification/ Pyrolysis Technology
(2) Biomass Densification Technology
(3) Biomass to Liquid Technology
(4) Biomass Torrefaction Technology
(5) Biomass [MSW] Treatment Technology
- Services
(1) Engineering & Consultancy
(2) Carbon Trading/ CER
(3) Plant Operation & Maintenance
14
(BB) JOINT-VENTURE
(1) Biomass Trading
(2) EPCC Services
(3) O&M Services
(4) Engineering & Consultancy
(CC) TRADING OF CARBON CREDIT/ CDM DEVELOPMENT
(DD) COMMERCIALIZATION OF R&D
- Technology: Pyrolysis Prototype Plant
- Products: Bio-Oil/ Torrefied Biomass
(EE) TECHNOLOGY TRANSFER
- As per areas related to (AA) above.
(FF) FINANCIAL ALLIANCE
- Project Financing/ VC:
(1) To seek for own project financing & VC partner
(2) To be as agent/ representative in offering project financing/ VC; on behalf of Principals from
EU.
We Offer: Import/ Export, Joint R & D
We Request: Distributorship/ Agency, Marketing Service, Trading of Carbon Credit, CDM Development,
Project Financing, Venture Capital, Technology Transfer CDM Development, Joint R&D
Number of Staff: 15
Annual Business Turnover (€): RM 2 Million per Year
Contact Persons:
Ashaari Bakar, Chairman
Norlela Mohammad, Director
Romie Romaizi, General Manager
15
COMPOSITE TECHNOLOGY WOOD SDN BHD
Focus Area: Eco-Product, Building Material
Composite Technology Wood Sdn Bhd (CT WOOD®) was established in year 2002 and invested in year
2004 for Wood Plastic Composite (WPC). CT WOOD products are made from the polymer resin (Plastic)
and bio-waste (rice husk), which are environmental friendly.
CT Wood is more related to
Building Material (Architecture & Landscape)
(ceiling panel, wall cladding, decking, picket fencing, pillar, railing, furniture lining )
All CT wood products are water resistant, termite free, fire retardant, durable and maintenance free.
Recognition & Awards:
Pioneer Status in 2005 from Malaysian Industrial Development Authority
Green Label from Singapore Environment Council
A Good Feeling With CT Wood
CT Wood does not only look like wood – it also feels like it. In order to achieve the typical “tropical wood
feeling” a special procedure is applied. CT Wood surface stays free from cracks and splinters in the long
term. Injuries caused by wooden splinters are therefore a thing of the past. Even after years, the CT
Wood material ensures an agreeable feeling.
Technique&Characteristics
CT Wood. Like natural model it can be sawn, drilled, painted or sanded. However, there is one decisive
advantage: CT wood does neither crack nor splinter and its cutting wastes are 100% recyclable.
We also provide customized designs/profiles/colors molding and components upon our most valuable
customers' demand. OEM services available too
Saving the tropical rain forests is easier said than done, because the demand for tropical woods is still
increasing. With CT Wood, everyone can contribute to the protection of the rain forests, since it is
absolutely wood free.
CT WOOD products are more in building material such as decking, ceiling, wall panel, furniture lining,
pillar, railing, hand rail, roof shingle and etc.
We need the architect or the council to recognise our product and with the recognition among the expert
or council our product can be accepted by the market as the platform to the market and government
agency.
Timber deck, building material distributors and traders can be our potential customers who can use our
product to supercede their existing product.
Besides that, we also provide OEM service which customer can offer their own design or profile, colour
and using our material to produce it. We can make all things feel like wood because our in material,
special finishing is applied.
16
CT WOOD has been awarded Pioneer Status in 2005 from Malaysian Industrial Development Authority,
Green Label from Singapore Environment Council.
We will never end up with these awards at this stage; CT wood material will continue to innovate to
receive more recognition among the experts.
We Offer: Collaboration of Public Procurement, Distributorship/ Agency, Import/ Export, Marketing
Service, Green Procurement.
We Request: Collaboration of Public Procurement, Distributorship/ Agency, Import/ Export, Marketing
Service, Green Procurement.
Number of Staff: 23
Annual Business Turnover (€):1.5 million
Contact Person(s): Lim Chin Boon, Marketing Manager
17
CE TECHNOLOGY BERHAD
Focus Area: Energy
CE Technology Berhad (CET) is a 100% Malaysian owned company and commenced commercial
operations in October 2002.
Our principal business is in the research, development, manufacturing and sales of Cleanroom Gloves
mainly serving the needs of the high end Critical Environment (CE) industries such as disk drive,
semiconductor, biotech, labtech, etc.
Cleanroom gloves are used as contamination control and electrostatic discharge (ESD) preventive device
in the above industries. Among the many end users of Cleanroom gloves manufactured by CET are
leading global MNCs.
Through the excellent support and co-operation given by the business partners of CET and more
importantly the employees since inception, the company has expanded in a short period of nine years
from ¾ acres rented premises to a fully owned site of 7 acres today.
CET is also the youngest company to win the Enterprise 50 award from SMIDEC in 2006 and among the
early SMEs to be accredited with QMS9001, EMS14001 with OHSAS18001 in the pipeline.
In line with our CSR, CET recently embarked on a full switch from fossil fuel to the use of green
renewable energy using Biomass from waste woodchips to generate heat energy for the use in its
manufaturing process.
1. CET is looking to work closely with a long term partner that can support its objective of further
diversifying the use of biomass in its plant e.g. generation of green electricity.
2. CET needs a partner who has the capability to finance its future investment and expansion in its
biomass project with justified returns to the partner.
3. Further improvement using better technologies in the running of its biomass system and support are
also needed.
4. CET is also looking at a long term buyer for its VER credits.
18
2003- Best New Distributer Award from Ansell.
2005- Selected by DOSH Perak (SMI Category) for National DOSH Excellence Award.
2006- Golden Bull Award for oustanding SMEs from SME International Association of Malaysia Nanyang
Siang Pau/ Ernst & Young.
2007- Awarded Financial Grant form SMIDEC for achieving ISO 14001: 2004 Environmetal Management
System.
2011- Selected for participation as the pioneer batch of Malaysian SMEs in the EU-BENP Programme
(EU- Malaysian Biomass Entrepreneur Nurturing Programme) which is fully funded by the EU Biomass
Association.
We Offer: We Request: Trading of Carbon Credit, Project Financing, Technical Assistance
Annual Business Turnover (€): 7.5 Million Euros
Contact Person(s):
Teoh Swee Sun, Chief Executive Officer
Lee Ee Leng, Assistant Manager-Lab/Safety and Health Officer
19
Century Titan Sdn Bhd
We can supply Wood Pellet and EFB Pellet in bulk
We Request: Distributorship/ Agency, Joint Production, Import/ Export, Resellership, Technical
Assistance, Technology Acquisition, Technology Transfer, Project Financing, Venture Capital
Number of Staff: 5
Annual Business Turnover (€): 3000k
Contact Person(s):
Hai Cher Teck, General Manager
20
DALAC MARINE ENGINEERING & SERVICES SDN BHD
This company is a core business of Holding Company being design & fabrication of customized light-tomedium – size surveillance, patrol and interception speed boats, as well as maintenance and repair of
such vessels for the Enforcement Authorities in Malaysia.
The Company ventured into biomass & waste resource conversion technologies in Year 2007, having
technical collaboration with, amongst others, Hangzhou Project & Research Institute of Electro –
Mechanic in Light Industry of the P.R. China to promote pulp & paper manufacturing technology using
palm-EFBs as feedstock .
The Technology Provider as mentioned above is a reputable paper technology research & project EPCC
institute, having set up numerous medium to large scale paper production Plants which use various
biomass feedstock such as sugarcane bagasse, bamboo, paddy/wheat straws, etc. and is an accredited
Test Center for pulp & paper products in P.R. China. Total assets (@ Year 2010) are some RMB 94
million, with turnover of RMB 100 million.
We welcome investors, esp. stakeholders of palm–EFB biomass, to set up pulp & paper manufacturing
plants using our technology which is proven in the very first palm-EFB derived paper products
manufacturing factory commissioned in Year 2008, located in the Johor State, West Malaysia.
Our paper manufacturing technology enables feasible & lucrative small–scale plant set-up, using
available waste products from the palm-oil milling industry; unlike the case of timber–based paper
production ventures which require relatively large-scale investment of hardware, energy and water
demand, and huge area of land bank ( for cultivation of specific trees ) in order to be economically
feasible .
Product buy-back can be arranged by the Technology Provider, if desired.
Project financing can also be arranged by an associated Company of the Technology Provider, if
conditions are met.
The Biomass Resource Development division of the Company has conducted several promotional public
talks on the said palm-EFB derived paper production technology, over the past few years, besides
actively involved in project feasibility study for some potential investors who are stakeholders of palm
biomass.
Though there has not been any successful project implementation till now, possibly owing to scarce
funding for such biomass resource conversion projects, amongst others, we are of the view that with our
recent offer of financial aid & product buy-back initiatives by our Principal, there will be renewed interests
for such green / eco-friendly ventures.
21
We Offer: Joint Venture, Management Contract, Project Financing, Technology Transfer
We Request: Joint Venture, Foreign Direct Investment (FDI)
Number of Staff: 40 +
Annual Business Turnover (€): RM 8 ~ 10 million
Contact Person(s):
KH Leong, Business Advisor
Janice Goh, Director (Biomass Division)
22
DR COPP BIOF2 SDN BHD
Focus Area: Energy, High Value Chemical, Eco-product, Process Equipment for Eco-Product
We are a small Company focusing on Biomass to Fuel/Food processes. We have successfully
patented/designed/built and operated the last official licensed biodiesel Plant in Malaysia using Cavitation
Technology.
We have modified and fine-tuned a new system for processing Empty Fruit Bunch into Solid Fuel
Briquettes using 40% less power than comparable systems. (50kw for 2.0ton finished product)
We have built the lowest power consuming Oil Seed Press for Jatropha and Palm Kernel using 100kw for
2 ton output.
We have built Low Cost Algae Reactors to work in Palm Oil Mills.
We want to sell Palm Kernel Shell and EFB briquettes to European Buyers.
We are looking for Co-Investment into Production Facilities for EFB Briquettes.
We are looking for Joint Venture to produce Briquetting Equipment.
Biodegradable Packaging Flupis and Fill-It since 1998 including complete Plant Manufacture and
Installation.
Various Reactor Installations for local universities.
Last official License for Biodiesel plant in Malaysia using Cavitation Technology.
High Efficiency Oil Seed Press.
Low Power Briquetting System especially for Empty Fruit Bunch.
We Offer: Import/ Export, Joint Production, Joint Venture, Green Procurement, Commercialisation of
R &D, Proprietary Consultancy, Technical Assistance, Technology Transfer
We Request: Collaboration of Public Procurement, Project Financing, Venture Capital
Number of Staff: 5
Annual Business Turnover (€): 1M
Contact Person(s): Dr. Richard Cropp, Managing Director
23
ECOGREEN BIOMASS SDN BHD
* Business Collaboration Profile will be provided in the next edition.
ENMARK (MALAYSIA) SDN BHD
Focus Area: Energy
We are an Engineering and Technology based company (established since 1987), offering an array of
world-class solutions in Green Technology, Process & Environmental Controls, Drying and
Dehumidification Systems, Key products and solutions offered are:
1. Energy efficient airless dryer (using either steam or electric heating)
2. Crusher (converting long palm fibre into small particle)
3. Pellet machine
4. Briquette machine
5. Boiler & Burner controls
6. Renewable energy power plant
We hope to expand our activities in the biomass renewable energy field by:
1. Exporting the airless dryer, crusher, pellet & briquette machines
2. Possible joint venture in the production & exporting of palm fibre pellet & briquette
Since our inception, we are proud with the following milestones:
1. Invention of the energy efficient airless dryer capable of drying the palm fibre down to 6%
moisture content without the risk of catching fire besides saving about 40% energy
2. One of the consortium members in the design & production of the Four-Season Climate House
(spring, summer, autumn & winter) in Malaysia
3. Design, install & commission the process control for the first tactyl glove plant for a multinational
company in Thailand
We Offer: Import and Export
We Request: Project Financing
Contact Person(s):
SK Yong, Manager
24
EVERISE CRIMSON (MALAYSIA) SDN BHD
Focus Area: Eco-Product
Everise started cultivation of kenaf in middle of 2009 on more than 30 hectares land leased from farmers,
at Pasir Putih, Kelantan. We have achieved in cultivating an eco-friendly plant, i.e. kenaf, on a piece of
rehabilitated acidic land not cultivated for over 35 years due to poor soil condition, and value-adding this
bio-mass into high value natural fibre composite products for construction materials.
Everise produces kenaf composite building materials from Kenaf plant that is fast growing, absorb high
rate of carbon dioxide, thus making it a leading bio-fibre source that would help improve the green index
for building industry. The plastics mixed into the composite can be recycled ones. Profiles produced look
and feel of wood but none of the maintenance hassle of wood. They are durable, can be moulded to
realistic wood appearance, with desired shapes and sizes. The profiles are used at domestic hotels,
resorts, offices and houses, and as decks and walkways. The decks are currently being fixed at goat
barns, too. The profiles can be redesigned into garden and household furniture.
Tests are underway under SIRIM Ecolabelling Scheme for company to achieve ISO4001.
Everise requires:
• Technical advisory to realise green agriculture and manufacturing practices to achieve cradle to
grave green compliance.
• To upgrade machinery that could improve technical and production efficiency, utilising green and
clean technologies, thus resulting in product manufactured that cause less stress to the
environment. This includes the post-harvest drying mechanism for fibre.
• To look into the formulation for the compound to ensure chemical utilised complies with Green
Manufacturing Product Standards and RoHS.
• Collection or processing centre to assist farmers to value-add kenaf fibre sold and get better
income from the semi-processed kenaf fibre. The processes undertaken by the farmers would
depend on the type of fibre the kenaf downstream manufacturers require.
Everise plans to broaden the scope of kenaf composite to the construction industry in general and help to
improve the green index for that industry.
• Capital and working capital funding to commercialise products being developed with research
institutions for
1. The development of low carbon and sustainable building products utilising Kenaf bast and
core, such as light weight wall panels, ceiling, bricks and roof tiles.
2. Hybrid of Kenaf and steel rod for structural applications.
1.
2.
November 2009: Everise obtained 100% tax exemption for 10 years from Eastern
Corridor Economic Region Development Council (ECERDC).
Malaysian Eco-labelling:
a) September – December 2010: SIRIM invited Everise as Working Group For EcoLabelling Criteria on Biofibre Composites Construction Material.
b) October 2010: Everise selected to participate in the Pilot Programme for Green
Procurement and Eco-Labelling Scheme operated by SIRIM QAS.
25
3.
4.
5.
6.
7.
8.
Managing Director of Everise appointed as the first President for Malaysian Kenaf
Entrepreneur Association (MyKenaf), which was approved by ROS on 10 Jan 2011.
February 2011: Everise among 50 SMEs in Malaysia selected to participate in EU-Malaysia
Biomass Entrepreneurs Nurturing Programme (EUM-BENP) under SWITCH ASIA.
March 2011: Everise was invited by PEMANDU to present and discuss about kenaf
industry.
International Natural Fibre Organisation (INFO)
March 2011: Everise was invited by INFO to participate in the development of Foresight
Study Framework and Methodology –for future development of fibre producers and industry
in developing and emerging economies.
July 2011: Everise appointed as industry representative for Development of Green
Composite Material for Non-Load-Bearing Applications under AEROSPACE MALAYSIA
INNOVATION CENTRE (AMIC).
August 2011: Secured RM400,000 order from Felda Engineering to supply composite
profiles for 14 goat barns.
We Offer: Contract Manufacturing, Import/ Export, Joint Production, Joint Venture, Foreign Direct
Investment (FDI), Venture Capital.
Contact Person(s):
Rusila Kamarulzaman, Managing Director
Mohd Rashidi Awang, Production Director
26
Futenco
Focus Area: Energy
Futenco is a company with Focus on biomass collection, processing and energy production. Our main
focus is currently in the Philippines where we are pioneers in public/private cooperation working on a
large scale project to recycle and reuse biomass in the Philippines; however we are expanding our
business across Asia.
We are seeking partners and clients in Malaysia and Indonesia to assist in developing complete business
models for the collection and processing of biomass. We are interested in win-win partnerships or simply
access to biomass from palm trees or other sources of biomass. Our aim is to create win-win situations
for all stakeholders involved and more importantly long term sustainable business models.
Futenco is the first and only partner of the Philippines government for a public/private partnership working
on a large scale project to reuse biomass to produce energy for the Philippines. President Aquino has
personally endorsed this project.
We Offer: Joint Production, Joint Venture, Management Contract
We Request: Global Product Sourcing, Project Financing, Venture Capital
Annual Business Turnover (€): 5000000
Contact Person(s):
Sven Maikranz, Chief Executive Officer
Carey Nash, Chief Operating Officer
27
GEORGE KENT (MALAYSIA) BHD
Focus Area: Energy
George Kent ( Malaysia ) Berhad was established since 1936 in Malaysia with key activities in water
meter manufacturing, water treatment projects, building automation system, green technology projects,
and international infrastructure investment in water related projects.
Exploring and seek out technical collaboration with high technology companies from EU on biogasification projects and renewable energy bio-mass projects with potential of applying for the Fit-in-tariff
on-grid projects.
Seek out R&D partners with green technology for building industry and services
Biggest facilities in Asia for manufacturing water meter and brass components
We Offer: Foreign Direct Investment (FDI)
We Request: Collaboration of Public Procurement , Contract Manufacturing , Distributorship/ Agency,
Joint Production , Joint Venture , Foreign Direct Investment (FDI) , Commercialisation of R & D , Contract
Research , Technology Acquisition , Technology Licensing , CDM Development
Contact Person(s):
Ralph Yew, Business Development Manager
28
GDF SUEZ
Focus Area: Energy
We Offer: Distributorship/ Agency
We Request: Green Procurement
Number of Staff: 1
Contact Person(s):
Willemse Rudy
29
GREEN & SMART SDN BHD
Focus Area: Energy
Green & Smart Sdn Bhd was established in 1980 using the name Mardec Engineering Sdn Bhd,
subsidiary of Mardec Berhad and later in 1994 changed its name to Green & Smart Sdn Bhd due to
ownership. It provides consultancy service to the industry at large. Now it’s a Bionexus Status Company
involved in Industrial Biotechnology R&D and products development.
From 1980, it was a major consultant in Natural Rubber processing and setting up NR products
manufacturing factories. It was also involved in pollution control works, mainly on ponding systems. In
1984 it started developing anaerobic tank digestors with European partners. Then it went on to develop
sewage treatment plants using anaerobic technology (GRASS™) in 2002 and palm oil mill effluent
(POME-MAS℠) treatment using tank digestors since 2007.
With vast experience in its own and with international synergistic partners/universities in the fields of
POME Treatment, Biogas Harnessing & Utilization, Effluent treatment for various industries & sewage,
Energy efficiency, Combined Heat & Power & Biomass Power Plant.
Green & Smart has more than 140 references in Malaysia & overseas including consultancy works for
World Bank, Asian Development Bank & Food and Agricultural Organization and at present, it main focus
is on industrial biotechnology
We would like technology collaborators for Biogas purification to methane and co₂.
Also we would be pleased to meet investors for the above technologies for S.E. Asia projects.
Awarded the Ministry of International Trade and Industry 1998 “Export Excellence (Service)
Award” (Anugerah Kecemerlangan Industri 1998) by the then Prime Minister of Malaysia, Tun Dr.
Mahathir Mohamad.
Awarded at 2006 Malaysian Technology Expo “Innovation Award” for the “GRASS™” reactor –
Anaerobic Treatment System for sewage and other waste waters by the Ministry of Science and
Technology and Innovation Malaysia.
Pioneers in many types of Anaerobic waste water treatment systems since 1984 and some of
them are using biogas in their boiler as fuel and others are flaring. More than a total of 30
anaerobic reactors of different types (UASB,
Were built in Malaysia, Cambodia, India and Thailand.
30
TM
Pioneers in introducing anaerobic sewage treatment system in Malaysia- GRASS Reactor
(Patented). 50% less energy use and 45% less sludge production compared to normal systems in
the market.
Completed R&D on a new design for individual septic tank with brand name GREENPAK using
“Innovation Fund” grant from MOSTI (Patent applied). Developing a commercial model.
TM
GREENPAK reduces sludge production and gives better BOD reduction compared to other
ISTs in the market.
Received SME award 2009
TM
We Offer: We Request: Technology Acquisition, Project Financing, Technology transfer and implementation –
Financial help. Angel investors
Number of Staff: 8
Annual Business Turnover (€): 2 Million
Contact Person(s):
Ir. R.M. Subbiah, Managing Director
31
GREENTREO SDN BHD
Focus Area: Energy
Greentreo Sdn Bhd, a bumiputera status company was incorporated on the 2nd October 2009 under the
Companies Act 1965. Presently, the company has been awarded a concession agreement and now is
preparing and planning the development of its first commercial POME biogas plant to recover biogas from
the organic effluent using biotechnological process for a state Government linked corporation (GLC) in
southern state of Malaysia.
Our flexible and advantageous solutions present our clients with various options for biogas utilization i.e.
electricity supply to national grid, boiler or additional internal power consumption with Clean Development
Mechanism (CDM) incorporated in our biogas projects.
We are looking to collaborate with palm oil mill owners interested to develop sustainable, renewable
energy solution to reduce their dependency on fossil fuel-based electricity without incurring huge initial
capital outlay, operational expenditures and bearing the technology risks.
We are also interested in pursuing with technology collaborations with both local universities and
research institutions to develop in house technology towards establishing ourselves as a technology
developer in the future. This is part of our long term planning towards establishing Greentreo as a
recognized renewable energy player in the country and regionally.
Lastly, in order to attract financial collaborations, we would need to establish and secure projects before
convincing potential investors to participate in our ventures. We would welcome to have discussions with
interested parties but at the moment we’re yet to be able to put an attractive proposition to investors as
projects are not forthcoming as planned.
We’ve so far managed to secure the Green Technology Financial Scheme (GTFS) from Green
Technology Corporation Malaysia, a government guarantee worth RM 8 million. However, our certification
has expired after two extensions due to lengthy project delays.
Greentreo was one of the 50 privileged companies selected by Biomass-SP under EUM-BENP
Programme to nurture potential companies participating in biomass industry.
We’ve so far managed to secure the Green Technology Financial Scheme (GTFS) from Green
Technology Corporation Malaysia, a government guarantee worth RM 8 million. However, our certification
has expired after two extensions due to lengthy project delays. Greentreo was one of the 50 privileged
companies selected by Biomass-SP under EUM-BENP Programme to nurture potential companies
participating in biomass industry.
We Offer: Contract Manufacturing, Joint Production, Joint Venture, Management Contract, Marketing
Service, CDM Development
We Request: Distributorship/ Agency, Technology Licensing, Technology Transfer, CDM Development
32
Number of Staff: 2
Annual Business Turnover (€): N/A
Contact Person(s):
Norwin Mahir, Director-Operations
Global Gateway Movers & Forwarders Sdn Bhd
Focus Area: Freight Forwarders
Potential Business and Environmental Collaboration to Offer/Request: Freight Forwarders
Number of Staff: 5
Annual Business Turnover (€): RM 1500,000
Contact Person(s):
Mr. Supramaniam, Director
33
GREENEARTH (INTL) HOLDINGS SDN BHD
Our company’s main business focuses in handling biomass or waste generated from the mainstream
palm oil manufacturing industry which Millers find them hard to eliminate. We have perfected a Biological
Technological Process to consume all waste water and Cellulose generated by the Industries. The all
natural system requires patience and let natural process convert the by-product “EFB” to high quality, low
C:N ratio Organic Bio-Fertilizers for soil rejuvenation and fertilization. In our Factories located in Malaysia
facilities producing complimenting fortified Bio-fertilizers, liquid nutrient supplements suitable for all home,
market gardens, commercial and industrial farms.
We have three main businesses in our operation, namely:Palm Oil Mills Waste Management, Recycling, Renew, Rejuvenate and Reduce landfills and pollutions
from toxic leachate, and fertilization of our soils the organic way.
We offer our products
•
•
•
Holistic Palm Oil Mills waste management fulfilling International Zero Waste and Zero Discharge
Policy.
Bio-Organic Fertilizers complying with AS4454
Bio-Organic Germination/Planting Blocks
Each customer has different requirements, we will satisfy each and every customer’s needs from Palm Oil
Mills waste management to fertilization of their plantations; we can tailor our bio fertilizer based on
customer’s requirement.
Currently our production capacity is 5000Mt per month of bio fertilizer for local and international markets.
Investor Opportunities:We are also looking for bona fide investors in Malaysia and Indonesia for further development of the
biomass conversion into high value product
We have successfully converted Palm Oil Mill Effluence, Fibers, Semi Solids and Boiler Ash and Old
Palm trees into high quality bio fertilizer suitable for all crops. Besides, we have achieved outstanding
performance, such as work closely together with UITM on carbonization of Cellulose EFB. We are
currently collaborating with our fellow Biomass-SP SME MTS Fibromat Sdn Bhd converting felled Palm
Trees (OPT & OPF) into high quality Organic Bio-Fertilizer.
We Offer: Contract Manufacturing, Import/ Export, Joint Production, Joint Venture Management Contract,
Green Procurement, Proprietary Consultancy, Technology Licensing.
We Request: Project Financing, Venture Capital
34
Contact Person(s):
Kester Chin, Marketing Director
Jackson Tan Hong Siang, Marketing Director
Lennon Yap Chun Yen, Marketing
35
HARIGOLD SDN BHD
Focus Area: Palm Kernel Shell
We are at Bintulu which is located at central Sarawak and the crude palm oil and it related products were
exported through the well facilitated Bintulu Deep Water Port.
Beside the PKS from our own palm oil mill, we also buy Palm Kernel shell from palm oil mill all over
Sarawak. We have stockyard which can stock up to 50,000 metric tons of Palm kernel Shell with facilities
of 18 meters length Weigh Bridge, shovels and transportation prime movers and is only 3 KM from Bintulu
Deep Water Port.
We are interested in long term buyers for Palm Kernel Shell which we can supply between 5,000 to
60,000 metric tons per shipment.
Potential Business and Environmental Collaboration to Offer/Request: Organisation's Achievements:
15,000 hectares of Oil Palm Plantation
One palm oil mill with capacity of 120 metric tons per hour
25,000 metric tons of Palm Kernel Shell per month
We Offer: Distributorship/ Agency, Import/ Export, Joint Venture
Annual Business Turnover (€):12 million
Contact Person(s):
Julian Ha, Managing Director
36
HEXGEN ENERGY CORP SDN BHD
*Business Collaboration Profile will be provided in the next edition.
HK KITARAN SDN BHD
HK Kitaran Sdn Bhd was founded in 2010. Our company is a leading global manufacturer of Coconut
Fibre, Palm Fibre, Cocopeat, Palm Trunk Pellet and Palm Leaf Pellet.
Coconut fibre is used to produce hawsers, ropes, cords, runners, mats, brooms, brushes, mattresses, car
seat, and some upholstered furnitures.
Palm Fibre is a superior substitute to coconut fiber due to its strong bond that are commonly used in
making mattress and cushion production, rope manufacturing, rugs and carpets production, erosion
control, soil stabilization, compaction, landscaping and horticulture, ceramic and brick manufacturing,
thermoplastic filler, flat board manufacturing, paper production, acoustic control, livestock care, compost,
fertilizer, animal feed and many others.
Cocopeat is a proven natural alternative to mined peat moss. Using cocopeat helps save precious water
resources and decreases the use of chemical nutrients. So, it is an excellent replacement for fertigation.
HK Kitaran is expanding rapidly on local and export market today. Besides that, we also have excellent
reputation for product quality, pricing and delivery. Currently our export countries are: China and Korea.
HK Kitaran Sdn Bhd is already exporting to China and ASEAN, and has established the market
acceptance there. We are looking forward to expand the business to the European Union (EU), and
seeking for any potential business partners to act as distributor or importer of green biomass raw material.
We are very interested to be affiliated with industrial and furniture associations, to promote the usage of
green biomass raw material in making their mattress projects. Besides that, the important thing is to
present on “GREEN TECHNOLOGY” and deliver a “GREEN MESSAGE” to every corner.
The future developments of material technology are based on the term “back to nature”. Then,
researchers and academia search the opportunities in finding new environmentally and friendly materials
as alternatives to inorganic materials especially polymeric composite materials.
37
• Malaysian Industrial Development Authority (MIDA) 2010
• Golden Bull Award 2010 – The 8th Malaysia Emerging SMEs
• SME 100: Malaysia Fast Growing Company 2011
We Offer: Distributorship/Agency, Resellership
We Request: Import/Export, Marketing Service, Commerciallisation of R & D, Technical Assistance,
Technology Acquisition, Technology Transfer
Number of Staff: 150 workers
Annual Business Turnover (€):Contact Person(s):
Wan Qi Chong, Export Marketing Manager
Jarret Yeoh Chee Hiong, Export Sales Manager
INDOCHINE BIO PLASTIQUES (ICBP) SDN BHD
Focus Area: Biodegradable & Biobased Resin & Finished Products
th
Incorporated: 4 October 2005
Factory: D09, Jalan Tanjung A/4, Free Trade Zone, Port of Tanjung Pelepas, 81560 Johor, Malaysia.
Premise: Factory is situated on a 6 acre site in the Free Trade Zone of the Port of Tanjung Pelepas.
Factory occupies a built up area of 2.5 acres, complete with 30 loading bays, leveling docks and an in
house state of the art laboratory and research facilities.
We are Indochine Bio Plastiques (ICBP) Sdn. Bhd, a leading green alternative bio plastic resin
manufacturer.
Our ICBP Bio Resin is made from tapioca starch a renewable resource; it is biobased and degradable
producing a very low carbon footprint.
ICBP Bio Resin is well suited for disposable items in injection molding applications such as disposable
cutleries, tableware’s, containers, casings, trays, automotive components etc.
Naturally ICBP’s green technology is geared towards developing a series of bio composites as
alternatives to conventional plastic applications, which are currently based on fossil fuel derivatives.
In a few months, our ICBP Bio Resin product range shall include bio resins for film and blow molding
applications.
38
ICBP Bio Resin is environmentally friendly and we have successfully reduced our carbon footprint in the
production cycle by many folds, increased efficiency and lowered energy consumption.
Currently our annual manufacturing capacity is at 24,000 tons.
-
AIB-Vincotte, Belgium certifies ICBP Bio Resin for OK Biobased Certification, which conforms to
ASTM 6866 standards. We are waiting for the test results for EN13432 from DIN Certico,
Germany.
-
ICBP was awarded the “Green Project Certificate” from the Ministry of Energy, Green Technology
and Water of Malaysia in 2009.
-
ICBP also achieved the prestigious “HALAL” Certification recognized in many countries around
the world which is similar to Kosher standards.
We Offer: Distributorship/ Agency, Import/ Export, Joint Production, Joint Venture, Technology
Licensing, Technology Transfer
We Request: Marketing Service, Resellership, Green Procurement, Contract Manufacturing, and
Contract Manufacturing
Number of Staff: 9
Annual Business Turnover (€): Contact Person(s):
Amir Bin Abul Hasan Ashari, Managing Director
Iskandar Bin Abd Aziz , General Manager
39
IPALM (MALAYSIA) SDN BHD
Focus Area: Energy, Eco-product
Organisation Profile: IPALM started in 2005 as a supply chain management company for the Nee Soon
Tat group of companies, IPalm has grown from that import/export business model into a well-known Palm
Oil Plant’s main contractor as well as front runner in introducing many Renewable Energy Technologies
namely being among the first to build EFB Pellet Plant in the world for FELD to completing the RM 42
million ringgit Sime Darby NURI Refinery OSBL Package.
IPalm is also actively promoting the POME Biogas Technology to the Palm Oil Industry with our well
proven technological partners from Thailand as well as local Malaysian. Besides these, IPalm has over
the years been entrusted by big multinationals from Germany as well as Japan to build as OEM
Manufacturer for their respective oil seed press as well as briquetting machines among others.
Recently IPalm also has launched its own brand of Industrial Gear Reducer together in a JV with a wellknown Korean Manufacturer.
We are very progressive company dedicated and passionate about bringing the latest technology,
predominantly into our core industry, the Palm Oil Industry.
IPalm has been actively involved in the field of BIOMASS gasification and densification (briquette and
pellet). We are also involved in Biogas for POME implementation.
Our Partners in technology include Satake Corporation Japan and ERDI Chiangmai which is a subsidiary
of Chiangmai University for the field of biogas from POME.
IPalm could provide full turn-key solution as we are experienced in construction especially in Palm Oil
Refinery (we were main contractors for 2 palm oil refineries, the latest being for Sime Darby in North
Port).
We propose to promote a fully sustainable solution for the palm oil industry by proposing biomass
densification to produce solid fuel which then could be used to replace fossil fuel (e.g. LFO, MGO & NG)
in the palm oil refining by means of biomass gasification.
Some of our major achievement
1
2
3
4
2006-ASSAR Refinery, Kuching Sarawak (Mechanical)
2006-TEPCO EFB Briquette Pilot Plant in FELDA PENGGILI
2010-Sime Darby Nuri Project (mechanical Main contractor)
2010-Felda Itochu 4MT EFB Pellet Plant (Main Contractor)
We Offer: Joint Venture, Joint R & D
We Request: Foreign Direct Investment (FDI), Merger and Acquisition, Project Financing, Venture Capital
Contact Person(s):
Low Mok Keen, Managing Director
40
IRIS ECO POWER SDN BHD
IRIS Eco Power Sdn Bhd (IEP) is a technology integrator and project developer. As a developer, its
business model is based on securing long term concessions (15 to 30 years), from which it derives
revenue in the form of tipping fees, sale of renewal power and carbon credit. As a technology integrator, it
collaborates with technology partners to design, fabricate, integrate and build each plant so that proven,
state-of-the-art technologies, are made affordable and commercially viable. It also has the capability to
undertake turnkey projects.
IEP’s business focus includes the following activities:
a. Total Waste Management Solutions
• Master Plan and Financial Modeling
• Waste Reduction, Reuse and Recycling
• Waste Storage System
• Waste Collection, Transfer and Transportation System
• Technology-based Waste Treatment Facility
• Final Waste Disposal Site/ Landfill
b. Renewable Energy
• Waste-to-Energy Plants
• Bio-Gas Plants
Its market focus is on the energy-starved, developing countries of Asia and Africa. Currently, IEP’s
projects include a biomedical waste incineration plant in Banting and two waste-to-energy plants in
Thailand. Most of the projects are financed through local banks and overseas partners.
Potential Business and Environmental Collaboration to Offer/Request: Due to our parent company’s existing business, we have an extensive network of clients in developing
countries of Asia and Africa. We always source for the most feasible technologies in the areas of total
waste management solutions and renewable energy. We also source for project financing and form
strategic alliances with technology suppliers.
Project
Location
Plant Capacity
Amata Industrial Waste Power Plant
Bangkok, Thailand
60 ton/day of waste;
Generating 1.5 MW
Paper Mobile Incinerators
Kuala Lumpur, Malaysia
500 kg/day of waste
Medical waste Incineration
Banting, Malaysia
MSW-to-energy Power Plant
Phuket, Thailand
2 ton/day of waste
700 ton/day of waste;
Generating 8 MW
We Offer: -
41
We Request: Collaboration of Public Procurement, Global Product Sourcing, Import/ Export, Joint
Venture, Management Contract, Technical Assistance, Technology Acquisition, Foreign Direct Investment
(FDI), Project Financing, Venture Capital
Number of Staff: 12
Contact Person(s):
Su Thai Ping, Managing Director
Mohamad Azdan Bin Ashari, Senior Project Manager
KONSULTANT PROSES SDN BHD
42
Kastraco Engineering (M) Sdn Bhd
Focus Area: Energy
We are an Engineering company that operate through out South East Asia,China & Australia .Our
corporate HQ is in Jakarta ,Indonesia and we have our country office in Shanghai, China, Puchong and
Kota Kinabalu in Malaysia, Singapore and Sydney, Australia. We are specialising in various Biomass Fuel
Preparation System on the Energy Sector, ranging from Biomass Fuel Preparation, storage,
transportation, bulk handling system, stacker reclaimer, silo, chipping plant, pelletising plant, ship loader
system and also a complete Small Scale Cogeneration Biomass Power Plant of 5mw to up to 50mw.
We design and sell complete Various Biomass Fuel Preparation System Starting from all type of Biomass
from Palm Trunk, Palm Frond, EFB, green wood, waste wood, urban wood, barks and to turn into various
forms from of shredded fibers, Chips, microchips, or pellets. We sell and design Biomass pellet and wood
pellet plant with capacity of 10,000 - 500,000 TPY production capacity. We handle the project from as
EPC contractor to build and transfer or based on the requirement of our customers. For customer who do
their own engineering and design, we sell various type of stand alone Biomass Preparation Machines or
System from chippers, shreeder, waste Biomass Grinder, Sceening station, drying system, Tubulator
conveyor system for various Biomass Bulk transportation system as Biomass Fuel or as for further
processing or storage. For those who handle massive amount of Biomass Chips or Fiber, or Fossil Fuel
such as coal, or dolomite or any solid raw material we have various types of design of stacking and
reclaiming System.
Design and build the Biomass Fuel Preparation System for cogeneration power plants for Shinyang in
Miri,Bintulu, GT plywood in Sibu,Sarawak and Ikutmaju in Tawau, Sabah. Design and build complete
chipping line with starting with Debarker for green wood to tubulators for the transportation of chips for
Evergreen in Nilai, Negeri Sembilan. Design and Build various chipping plant and line for Yanox in
Kuantan, Middlewood and Megascope in Sibu, Aramijaya in Pasir Gudang. Design and Build Stacker
Reclaimer for APP Hainan Design and Built Complete Biomass Power Plant in Irian Jaya, Indonesia. We
have also designed many palm Biomass Preparation Systems from the palm trunks, palm frond and EFB.
We Offer: Proprietary Consultancy, Technical Assistance, EPC Contractor for Biomass Preparation
System
Number of Staff: 5
Contact Person(s):
Chen Fong Main, Sales Manager
Bruks, Project Manager
Oei Teck Jin, Project Manager
43
MAGENKO RENEWABLES (ASIA) SDN BHD
Focus Area: Energy
Magenko, based in Europe, is having operations that are international in scope and extending across a
variety of clean and renewable energy (C.R.E.) sectors. The company's strategy is to increase
shareholder value through the expansion of its portfolio and the diversification of its operations. In order to
meet these goals Magenko has made a commitment to ensuring quality, health and safety (QHSE) and
sustainability, always by the highest ethical standards.
Magenko has examined and researched the diverse opportunities to be found in South East Asia's
countries, and is well versed in the potential economic and environmental impact of C.R.E. sources, and
the expansion and gains to be made by prudent project development. The importance of C.R.E. in this
area merited a strong presence through Magenko's dedicated company with local partners.
Potential Business and Environmental Collaboration to Offer/Request:Magenko's representation in the region is complemented by the consultants and experts that have been
selected to represent the company. They have been chosen on the basis of their experience and
expertise in the target sectors, and their ability to assess and propose relevant projects.
These professionals have invaluable connections and influential contacts, and consequently possess
extensive experience in design and implementation of projects related to C.R.E.
The aforementioned elements are applicable to our key associates and partners as well.
1. “Organics” builds systems for the control and minimization of pollution, develops and employs
renewable energy technologies and constructs facilities for the recycling of resources. It is staffed
with highly specialized and experienced professionals who have been involved in approximately
300 installations since 1985.
2. “Asver Overseas Ltd”, with numerous years of accumulated experience, provides specific expert
advice and knowledge in the field of Waste Management, Utilization and Energy.
Currently, Magenko has secured two (2) RE projects in Malaysia:1.
Landfill Gas to Energy Project – recovery of methane gas from municipal solid waste and
generation of electricity for exporting to national grid.
2.
POME to Energy Project – production of methane gas from anaerobic digestion of palm oil mill
effluents (POME) for generation of steam for industrial use.
Two (2) projects in Indonesia:POME to Energy Project – production of methane gas from anaerobic digestion of palm oil mill effluents
(POME) for generation of electricity for exporting to local grid (x 2 projects).
One (1) project in Thailand :Gasification of MSW to Energy Project – production of energy from gasification of municipal solid waste
and supply to national grid.
44
We Offer: CDM Development, Technical Assistance, Foreign Direct Investment (FDI)
We Request: Joint Venture, Project Financing, Venture Capital
Number of Staff: 1 senior representative in Malaysia
Contact Person(s):
Liew Shan Sern, General Manager
Dr. Dennis Saw, Advisor
45
MALAKOFF CORPORATION BERHAD
Focus Area: Water
Malakoff is one of the leading independent power and water producers based in Malaysia with a world
class reputation. Our core business includes power generation, water desalination & operation &
maintenance services. In Malaysia, we own an effective capacity of 5,020MW comprising of 6 power
stations that run on gas, oil and coal. Malakoff plans to continue expanding its growth in power and water
related projects as well as emphasis on new project development in the Green Technology and
Renewable Energy (RE) sector. Green Technology Initiative Unit has been established early last year in
order to realize opportunities in the RE development ventures both locally and internationally and at the
same time to support National Renewable Energy target set by the Government.
Potential Business and Environmental Collaboration to Offer/Request:One of the aims in the formation of our Green Technology Initiative department is to venture into projects
in Renewable Energy through utilization of sustainable ingenious resources for power generation. Locally
Malakoff would like to explore business opportunities and to develop core expertise in this Renewable
Energy sector not only limited to biomass and biogas but solar and small-hydro as well. Potential
collaboration we currently looking into in particular for biomass development projects are as follows :- a)
Potential technology provider from Renewable Energy Generation from the application of biomass &
biogas b) Potential feedstock supplier for power generation biomass project c) Project financing on RE
projects d) Technical assistance or consultant for Renewable Energy projects e) Locating marketing
services or resellership for value added products (e.g. organic fertilizer/pellets) f) Processing raw material
to biofertiliser / organic fertiliser quality standards g) Renewable energy project acquisition or project
ventures, local or overseas
Organization milestones in Renewable Energy are as follows : a) Establish collaboration with national sewage treatment plant operator for development of biogas
demonstration plant based on sewage & organic (food) waste co-digestion projects
b) Actively pursuing biogas projects utilizing animal waste as primary feedstock
c) Identified potential biomass incineration project in Sabah utilizing palm oil waste as main feedstock
d) Conducting feasibility studies for Waste to Energy Projects which serve as an efficient option for
Municipal Solid Waste (MSW) management and resource recycling
e) In works to acquire & develop Mini-hydro projects in Malaysia
We Offer: Merger and Acquisition
We Request: Joint Venture, Marketing Service, Resellership, Green Procurement, CDM Development,
Proprietary Consultancy, Technical Assistance, Technology Licensing, Project Financing
Annual Business Turnover (€): 1.34 Billion
Contact Person(s):
Mohd Hilmi Hasni, Executive
Mohd Azmir Zainul Abdin, Engineer
Nik Nuruhafiz Muhd Noor, Senior Manager
46
MASTER JAYA ENVIRONMENTAL SDN BHD
Focus Area: Air pollution Control & Industrial Equipment and System
Master Jaya Environment is an engineering, manufacturing, contracting and sales & service company
specialized in the field of Industrial Ventilation and Air Pollution Control.
We are a total solution provider for the full range of Air Pollution Control Equipment & Systems which
include Bag Filter Dust Collector, Gas Scrubber, Cyclones & Multi Cyclone, Oil Mist Filter and
Electrostatic Air Cleaner, Thermal Oxidizer, Solvent Recovery and Odour Control Activated Carbon
Column/ Carbon Filter.
Our scope of business, supply and services cover Consultancy, Design, Steel Fabrication, Supply,
Installation, Testing & Commissioning, DOE & DOSH Submission & Approval, Spare Parts & After-sales
Service and conduct of Certified Training Courses on Air Pollution Control.
Potential Business and Environmental Collaboration to Offer/Request:Master Jaya Environmental Sdn Bhd is an Engineering, Manufacturing Contracting, Sales and Service
Company specialized in Industrial Ventilation, Air Pollution Control, Steel Fabrication and Powder
Handling System.
Master Jaya has all the necessary pre-requisites as a specialist company in Air Pollution Control, to seek
potential business collaboration in environmental and green engineering sectors on the biomass
development projects.
For effective and mutually beneficial business and environmental collaboration, Master Jaya is capable
and serious to offer our potential and prospective collaborators and business Partners our Products,
Equipment and Systems, technical services and after sales service connected with Industrial Ventilation
and Air Pollution Control for all related biomass plant and projects.
We are also open and happy to offer our Steel and Sheet Metal Fabrication facilities to fabricate
components, equipment & machinery and even complete systems for biomass plant and systems. We
can act as your Steel Fabrication Contractors and Equipment and System Installation Contractors for your
Biomass plants.
Master Jaya is also interested to work as an Agent/ Distributor for any Biomass Plant and Machinery and
new technologies to market, sell, install and service such systems and technologies in Malaysia and the
ASEAN countries.
Master Jaya Environmental Sdn Bhd has had proven track record of success and experience in the field
of Industrial Ventilation and Air Pollution Control as we have designed, manufactured, installed and
successfully commissioned more than 1,000 sets of Air Pollution Control reference plant in Malaysia,
ASEAN Countries, etc. over the last 28 years of our business operation.
Besides having built up a strong team of engineering and technical personnel specialized in Air Pollution
Control, Master Jaya has also invested substantially in our Modern Office and Steel Fabrication
Production Plant & Machinery and full Training facilities. We have so far established a diversified
customer base in almost all manufacturing and process industries in Malaysia and other foreign
countries.
47
Our sales territories cover Malaysian, ASEAN Countries, Africa, Japan, Sri Lanka, Bangladesh, etc.
We have strong team of qualified experienced and competent engineers & technicians, supervisors,
foreman, fitters, welders, etc to handle Sales, Project, Production, Installation and After-Sales Service.
We are a One-Stop-Centre to solve your Industrial Air Pollution Problems.
We Offer: Contract Manufacturing, Joint Production
Number of Staff: 60
Annual Business Turnover (€): 3.8 million
We Request: Distributorship/ Agency, Technology Acquisition, Technology Licensing, Technology
Transfer
Contact Person(s):
Ir. AK Woo, Managing Director
Jocelyn Wee, General Manager
48
Millennium Partners (M) Sdn Bhd
Focus Area: High Value Chemical
Organisation Profile: Our business began in the year 2000 as a raw material supplier and we are
currently supplying vegetable oil based solvent and cleaners applicable on industry such as printing ink,
paint, coating, lubricant, cleaning chemicals and others. We have begun looking at the biomass raw
materials
for
continuous
business
sustainability
and
profitability.
Our range of vegetable oil based industrial solvents and general cleaning agents are an effort of
continuous research and development work done by Malaysia Palm Oil Board (MPOB), a leading institute
in palm oil industry to assist us in enhancing our competitive edge in the market.
Our range of products are mainly derived from palm oil, however some products are produced from
various types of oil due to logistics, availability and other reasons.
We aim to become the preferred environmental friendly solvent and cleaners’ supplier to commune and
partner; as we at Millennium Partners aim to achieve.
We are looking for potential venture with European companies in either the following:
1) Contract manufacture bio based solvent in Malaysia.
2) Technology of pyrolysis lignocellulosic biomass materials to bio-oil and then further make into
bio based solvent.
3) Investor who are interested and passionate in investing in bio based solvent and cleaners
businesses or manufacturing plant.
1) Gold medalist in the 15th International Invention, Innovation, Industrial Design and
Technology Exhibition in Malaysia (ITEX) (2004)
2) First Eco-label
category(2005)
certification
license
in
Malaysia
–
Biodegradable
cleaning
3) Silver Medalist in Salon International Des Invention Geneva, Switzerland (2006)
4) Forga Germany certification of Inxbio Wash NX 860 for offset printing machines (2007)
Number of Staff: 12
Annual Business Turnover (€): Approx. 600,000.00 (TCI Graphics (M) Sdn Bhd)
Contact Person(s):
William Tong, Managing Director
Stephanie Chong, Director
49
agent
MYAGRI NUTRIBIO SDN BHD
Focus Area: Agro Biotech
MYAGRI Nutribio Sdn. Bhd. (MNSB) is a Strategic Bio-nutrient Recycling Company promoting the Total
Nutrient Recycling of Green Waste into Bio-Nutrients in the form of Bio-Organic fertilizer.
MNSB is a Service Provider for Bio-nutrients recycling for Plantation and Agriculture Industry. It provides
consultation, management, technical and operational services for total nutrient recycling solution through
composting process, with composting microbial concoction. The recycling process of oil palm waste
materials thru composting will allow plantation companies to incorporate bio-organic fertilizer in their
supplementation regime.
MNSB Bio-Organic Program allows the Plantation and Agriculture Industry to implement nutrient and bioresources recycling, and reduce or complement the application of chemical or inorganic products.
Furthermore, this will promote the use of beneficial microbes for growth enhancement to become
‘commodity’ products rather than ‘special needs’ products.
Under the program, MNSB assists companies to convert all Green Wastes available at the Oil Palm Mill
such as Empty Fruit Bunch (EFB), Mesocarp Fiber, Decanter Cake, Boiler Ash and Pal Oil Mill Effluent
(POME) Sludge. These materials are treated and composted until they become mature Organic material.
They are later enriched with the beneficial microbes to produce Bio-Organic fertilizer.
The Bio-organic program also provides an opportunity for the companies to participate in the initiatives
towards achieving Carbon Neutral under the Clean Development Mechanism as promoted by the Kyoto
Protocol.
Potential Business and Environmental Collaboration to Offer/Request:Requests seek in terms of products, services, technologies and finance - on Green Biomass Conversion,
particularly in composting, bio-nutrients development; and algae based bioremediation and product
developments
MNSB provides its management, technical and operational services in Bio-organic plants for the
plantation industry. It is established in 2004 and is part of the Myagri® Group of Companies which is a
group of biotechnology companies dedicated to providing more efficient, effective and environmentally
friendly solutions to challenges faced by current agricultural and environmental based industries. The
development of the Bio-organic program started in 2005 and has successfully produced bio-organic
fertilizer in 2008.
Under the Bio-Organic Program, MNSB has secured contracts with 18 oil palm mills in Malaysia under
various business and technical management arrangements to convert the waste especially empty fruit
bunches to Bio Organic fertilizers. A total of 33,443MT of bio-organic fertilizer worth RM17.5 Million has
been produced under this program since 2008. In 2011, MNSB has also received the Green Certification
under the Green Technology Financing Scheme offered by the Government of Malaysia.
We Offer: Contract Manufacturing, Distributorship/ Agency, Import/ Export, Joint Production, Joint
Venture, CDM Development, Commercialization of R&D, Joint R&D, Proprietary Consultancy, Technical
Assistance, Technology Licensing, Merger and Acquisition.
50
We Request: Contract Manufacturing, Joint Production, Joint Venture, Commercialization of R&D, Joint
R&D, Proprietary Consultancy, Foreign Direct Investment (FDI), Project Financing
Contact Person(s):
Hayati Taib, Group Managing Director
NGAN & NGAN Holdings Sdn Bhd
51
NEXUS MARITIME (M) SDN BHD
Focus Area: Energy
We started as a logistic provider in Port Klang since 2005. Involved in the 1st palm kernel shell export
from Port Klang in year 2004 to Europe and followed the supply chain since. Involved and experienced
with PKS export from Padang,Sumatra.
Oversees the price of PKS from USD20+/mt to current near USD60/mt FOB Sumatra main ports.
Believing next generation palm biomass should come into market soon with the growing demand and
readily available market. We will provide consultation to any potential buyers and sellers with hope of
eventual ‘solid’ deal.
Currently representing the biggest PKS buyer from Italy and also performed 8 shipments of PKS (7000mt
to 11,000mt /shipment) to Japan since year 2008 with Japanese Company. We are the first company to
handle PKS export to Europe in huge quantity specifically Rotterdam in year 2002. We have satisfied
buyers and sellers with continuous dealings.
We Offer: Distributorship/ Agency, Import/ Export, Marketing Service
We Request:Number of Staff: 2
Contact Person(s):
Jimmy Teo, Managing Director
52
OSK Investment Bank
Focus Area: Organisation Profile:
A track record of rapid growth attests to the commitment and dynamism of the OSK Group which offers a
wide spectrum of financial, advisory and investment services. A listed company in Bursa Malaysia, the
Group operated in Malaysia, Singapore, Hong Kong and Shanghai, and has a reputation of
professionalism, integrity and innovation amongst its clients and partners
Venture Capital & Private Equity
In OSKVI, we are dedicated to provide the following value added services:
•
•
•
•
Growth and Expansion funding
Business and corporate development e.g. Assist invested companies to grow into profitable, well
run enterprises
Capital market strategic guidance e.g. identify value arbitrage windows in capital market
conditions and
Create cross selling and strategic alliance opportunities among investee companies to leverage
on each other’s strength
Debt Capital Financing
With our expertise in structuring a wide range of cost efficient and optimal debt financing programmes via
private debt securities instruments, Conventional or Islamic. Services offered such as:
• Advising and arranging for the issuance of debt securities
• Arranging or providing “Bridging Loans” pending the issuance of debt securities
• Underwriting and subscribing the issuance of debt securities
• Placement of debt securities
• Agency role throughout the tenure of the debt securities
Foreign Exchange
Provide FX product-Spot, Forward, and swap to suit client’s requirement
OSK has over 57 offices across Malaysia and has a presence in the following countries:
•
•
•
•
•
Singapore
Hong Kong
Shanghai
Indonesia
Cambodia
53
In April 2008, Bank Negara approved OSK’s plan to set up a commercial bank in Cambodia to undertake
commercial banking activities. OSK Indochina Bank Ltd had on October 10, 2008 commenced
commercial banking operations in Phnom Penh. The bank offers the full range of retail and commercial
banking products and services as well as foreign exchange and capital market expertise.
Contact Person(s):
Ler Pei Fen, Senior Associate
Bernice Chan, Senior Associate
Pahang Biodiesel Corporation Sdn Bhd
54
PJI HOLDINGS BERHAD
PJI Holdings Berhad (PJIH) was incorporated in 1999 and is public-listed on Malaysian Stock Exchange
since 2001 with its original business started with PJ Indah Sdn Bhd operated in 1994.
PJIH comprises a number of companies which are involved in various spectrums of business like property
development and specializing in engineering activities for civil, building, mechanical & electrical,
infrastructure, power substations, transmission lines, water treatment plants, renewable energy,
environment services and other related engineering works. Each company within PJI Group focuses on
its own area of expertise and niche market segments, but together as a group, the combined range of
services and products provide an integrated package of highly specialized electrical, mechanical, civil,
building and infrastructure works. PJI Group is able to manage large-scale turn-key projects, all of which
offers superior quality service to its customers.
The Group has developed a project management system that is effective, efficient, and flexible with
emphasis on continued enhancement of project management control and implementation techniques,
emphasis on innovative design and value engineering, as well as development of new technological
products and value-added services in exceeding its customers’ specifications and expectations.
Potential Business and Environmental Collaboration to Offer/Request:1. Joint Venture in the development of Solar Farm Power Plant.
2. Sourcing of Financial instrument to finance Biomass Power Plant, Solar Farm Power Plant.
3. Offering our services as the EPCC for Biomass Power Plant, Solar Farm Power Plant and Mini
Hydro Power Plant.
PJI Group of Companies has involved in the Mechanical & Electrical Engineering Services since 1990
and has also venture into Power and Water Infrastructure Works.
PJI Group of Companies has been accredited with BS EN ISO 9001: Quality Assurance Certification
(2008) and OHSAS 18001:2007 Certificate of Compliance Occupational Health & Safety Management
System (2004).
The group has also been awarded the following the Industrial Awards by various authorities:
1) The Malaysian CIDB Lower Medium Scale Project Award (2001)
2) Enterprise 50 Award (2001)
3) Kuala Lumpur Stock Exchange : Corporate Sectoral Award (2003) – Second Board Trading /
Services Category
4) The Malaysian CIDB Builders Award for Best Electrical Project Category (2002)
5) ASEAN Federation of Electrical Engineering Contracts “Best Electrical Contractor Award (2004)
6) Energy Industry Award under the category of Contractor Excellence Award by the Energy
Commission (2011)
We Offer: Management Contract
55
We Request: Joint Venture, Trading of Carbon Credit, Project Financing, Venture Capital
Number of Staff: 81
Annual Business Turnover (€): RM 85 Million
Contact Person(s):
Lim Chong Ling, Managing Director
Ho Wing Na, General Manager
56
POIC Sabah Sdn Bhd
POIC is located near the township of Lahad Datu in southeastern Sabah. It is at the centre of the State's
1.3 million hectares of oil palm plantations. The first two phases covering 1,150 acres focuses on major
palm oil industries such as refineries, oleochemicals and critical support industries such as central steam
provider, bulking installations and dedicated jetties.
In the next phase covering about 3,300 acres, a broader based cluster is planned to encompass biomass,
energy intensive sectors, cocoa, ship repairs and construction, marine, furniture and machinery sectors. A
halal hub comprising1,000 acres is also targeted to capture the sizable global halal market.
We are interested in the following potential collaboration partners:-
investors who are looking to invest in manufacturing high value added biomass based products
technology
providers
for
downstream
biomass
manufacturing
activities
equipment and machinery providers for e.g. harvesting of EFB
Number of Staff: 51
Contact Person(s):
Rose Pun, Senior Manager, Marketing & Sales
Veve Lo, Assistant Manager, Marketing & Sales
57
Promise Earth (M) Sdn Bhd
Name of Company; Promise Earth (M) Sdn. Bhd
Date of Establishment: 10th December 2008
Business Address: 46A and 48A-1, 1st Floor, Lebuh Enggang, Off Jalan Meru, 41050 Klang, Selangor.
Business Registration: Private Company Limited By Shares
Registration No:841164-V
Board of Director:
Chong Yeun Yeian
Chong Shan Ei
Koh Boon Khui
Takahiro Imamura
Shareholder:
Chong Yeun Yeian
Chong Shan Ei
Koh Boon Khui
Lee Boon Tang
Yasuhiro Kurauchi
Takahiro Imamura
Board of Director:
Chong Yeun Yeian
Chong Shan Ei
Koh Boon Khui
Takahiro Imamura
Yasuhiro Kurauchi
Business Enquiries:
Mr. Chong Yeun Yeian -Managing Director
Mr. Chong Shan Ei-Marketing Manager
Mr. Koh Boon Khui-Senior Researcher
Ms. Lee Wei Inn-Researcher/Microbiologist
Mr. Lee Boon Tang-Technical Department
Ms.Josephine Lee-Executive Secretary
Authorised Capital: RM 100,000.00
Paid- Up Capital: RM 100,000.00
No. of Employees: 7 persons
58
Product Range:
1.
BIO-MATE® On- site,High Speed , Reduce, Reuse, Recycle Organic Waste Composting System.
2.
Inozyme (Enzyme)
Business Partner: N.I.TECHNO CO., LTD (Japan)
Research Partner : University Putra Malaysia (UPM)
Member of: Malaysian Biotechnology Corporation Sdn Bhd (Bionexus)
Association of Environmental Consultants and Companies of Malaysia (AECCOM)
EU-Malaysia Biomass Sustainable Production Initiative (Biomass SP)
Promise Earth (M) Sdn. Bhd. is a biotechnology company involved in treatment of organic waste through
fermentation and composting process. Promise Earth (M) Sdn. Bhd. is proud to introduce Bio-Mate, a
high-speed on-site organic waste composting technology. Bio-Mate is unique in its ability to compost
organic waste generated from food sources, agricultural resources, marine products, sewage sludge
within 8-48 hours into viable compost fertilizer or animal feed.
Customers Profile:
Putrajaya
Cyberjaya (Cyberview Sdn Bhd)
Majlis Perbandaran Subang Jaya (MPSJ)
Kuching City Council
Alam Flora Sdn Bhd
Sime Darby Research Sdn Bhd
Rumah Sembelih Johor Bahru
Rumah Sembelih Kota Bahru and Abattoir Jajahan Pasir Mas, Kelantan
Persatuan Pengusaha-pengusaha Pulau Perhentian Terengganu.
D-Aryna Global Sdn Bhd
Marushin Canneries (M) Sdn Bhd
Swiss-Garden Golf & Resort, Damai Laut, Perak
Berjaya Hills Berhad
Cycle Trend Industries Sdn Bhd
59
J-Biotech Environment Sdn Bhd
AsiaBio Process Technologies Sdn Bhd
We Offer: Distributorship/ Agency, Technology Acquisition, Joint Venture, Technology Licensing,
Technology Transfer
We Request: Collaboration of Public Procurement, Foreign Direct Investment (FDI), Merger and
Acquisition, Project Financing, Venture Capital.
Number of Staff: 9
Contact Person(s):
Chong Yeun Yeian, Managing Director
Chong Shan Ei, Marketing Manager
Alias Bin Daud, Sales Manager
60
PZ BIO ENERGY SDN BHD
Focus Area: Energy, Eco-product, Bio Fuel-Diesel
PZ Bio Energy Sdn Bhd (POWERZONE®) is a growing eco-friendly company; offering, renewable
alternative energy fuels using waste crops of various and multi feed stock such as used cooking oil, waste
vegetable oil, bulk vegetable oil, waste palm oil, and jatropha oil. Giving a proprietary biotechnology to
produce high-value performance improved formulated biofuels. Large existing and rapidly emerging new
demand exists for these products in additives, lubricants, renewable biodiesel and green fuels.
POWERZONE® making biofuels sustainable
To move towards a future with a sustainable energy supply and healthy consumer goods production,
every solution is important. For this reason, energy use must become more and more efficient, production
processes must be improved and the full potential of new technologies must be realized. Industrial
biotechnology with its competitive, clean and clever use of bio-based technologies can play a key role in
making biofuels more sustainable.
PZ Bio Energy Sdn Bhd is playing it role towards helping Malaysia to reduce CO₂ and moving forward
towards Green Energy and calls for greater efforts on Sustainable development of Biofuel.
PZ Bio Energy Sdn Bhd recognizes the importance of standards to ensure sustainability, and believe that
the best way to achieve them is to engage directly with those who have to implement and enforce them
on the ground. However we eliminates the controversy by using non-edible crops and focus is on the
supply natural or agricultural resources such as used cooking and waste oil. It is also a great source of
renewable alternative energy to reduce carbon emissions for our healthy planet earth. Our biodiesel is
produced from natural-renewable sources which offer socio economic benefits for a cleaner world.
With a competitive funding to undertake the development of bio-aquatic technologies that has
commercial potential in Biodiesel technology Industry, it could boost the economy especially in the
alternative fuel energy to the transport sector and towards the government vision heading Green
Technology. These technologies have the commercial potential to create new businesses and
economic wealth for Malaysia. Biodiesel from fish residue/waste could also promote more efficient
utilization of aquatic living resources. It could therefore have a positive impact on food security and
energy security
We are also hoping the Biomass-SP could assist us on the following matters:
1. All Biodiesel manufacturer or producer to be given a subsidy. It is very competitive to sell
biodiesel against the subsidy price of conventional diesel.
2. Stop exporting waste oil such as Used Cooking Oil or Waste Vegetables Oil.
3. Control the collection of waste oil including Used Cooking Oil or Waste Vegetables Oil to make
sure that all collection of waste oil are collected “NOT FOR HUMAN USE AND CONSUMPTION”
4. Set up cooperative to do all the collection of all waste oil.
5. Add or amend the act on The Environmental Protection Act places a Duty of Care on every
individuals, companies and industry to ensure "that all reasonable steps are taken to look after
any waste you have and prevent its illegal disposal by others and wrongly use for human use and
consumption", this includes waste cooking oils and fats.
6. Educate the public about the important and the knowledge about the affect of using used cooking
oil for human consumption. Create awareness to the public about the hazards.
61
PZ BIO ENERGY SDN BHD is willing to open the opportunity with potential business partners from the
European countries to secure orders in the European Union (EU) region for biodiesel or biofuel sales in
both industrial and domestic applications. The partners should also be buyers who are able to provide
advice in production of biodiesel or biofuel that meet the end-users’ requirements and specifications.
Investors who are interested in investing for renewable biodiesel or biofuel manufacturing are also
welcomed to explore possibilities of production expansion.
a) Environment performance plan (EPP):
Alternative fuel is on the rise across the globe and biofuel or biodiesel, set to be the one of the energy
sources in the world, undoubtedly has a big potential to contribute towards reducing the world’s
dependency on fossil fuels and mitigating climate change. To this, PZ Bio Energy Sdn. Bhd. is playing its
role to help Malaysia’s move towards reducing its greenhouse gas (GHG) emissions by developing
Biofuel plant which utilises used cooking oil or waste oil. Such undertaking creates not only economic, but
environmental value via conversion of waste to Biofuel or Bio Diesel and GHG emission reduction (via
CDM). The 2000Mt Biofuel plant in Ulu Tiram, Johor Bahru, and Johor will be commissioned by February
2011 and it is expected to generate 30000 tons/year CO₂ deductions toward transportation sector.
b) To be at the forefront of environment conscience in the industry, PZ Bio Energy Sdn Bhd aims to
implement the Environmental Management System (EMS) ISO 14001 by 2012 to improve the
environmental performance its biodiesel or biofuel manufacturing plant.
c) Offer an investment terms to potential investor.
d) Heading IPO.
e) Offer to promote & sell our Bio-fuel products
POWERZONE® Achievement & Complimentary
1. Biodiesel License from Ministry of Plantations Industries and Commodities, License No: 01013 –
2010.
2. Green Technology Project Certificate from Malaysia Green Technology Corporation, Ministry of
Energy, Green Technology and Water. Cert No: GTFS/T/C0001 – 2010.
3. Pioneer Status from Malaysia Industrial Development Authority (MIDA) – 2010.
4. Manufacturing License from Ministry of International Trade & Industry (MITI). License No:
A017964 – 2010.
5. Diesel Fuel-Specification, MS 123:2005; Malaysian Standard from SIRIM SAQ International Sdn
Bhd – 2010.
6. MPOB license from Malaysia Palm Oil Board. License No: 530858017000 – Since 2009.
7. DYNAMOMETER Test passed from School of Automotive Engineering Faculty, Army
Engineering Institute (INSTITUTE KEJURUTERAAN TENTERA DARAT-IJED), Ministry of
Defense, Port Dickson, Negeri Sembilan, Malaysia.- 2009.
8. Won the Gold Award For Excellence & Business Prestige at the Quality Summit New York 2009.
9. Compliment letter & support letter from the Malaysian Chief Armed Force, General Tan Sri Abdul
Aziz Zainal in 2009.
10. Compliment letter from Beijing Department of Health, People Republic of China in 2009
11. Compliment letter from Mr. Raywat Areerob, Member of Parliament Phuket, and Thailand in
2010.
12. Support letter from the Malacca Chief Minister Office, State of Malacca in 2010
13. Participating in the Melaka Technology Hijau Program - 2010
14. Awarded the Crown Award at the International Quality Summit in London 2010
62
15. MOU with Malacca State government agency, Perbadanan Hang Tuah Jaya for the “Program
Biodiesel Melaka” Malacca Biodiesel Program)-2011.
We Offer: Collaboration of Public Procurement, Contract Manufacturing Distributorship/Agency,
Import/Export, Project Financing, Venture Capital, Joint Venture, Reseller ship
Number of Staff: 12
Contact Person(s):
Irwan Mohd Yusof, Chief Executive Officer
Foong Ah Sam, Managing Director
63
RONSER BIO-TECH SDN BHD
Ronser Bio-Tech Sdn Bhd, a bionexus status company and waste water treatment specialist is the owner
TM
TM
of AnaEG and BioAX , two advanced technologies in treating high-organic waste water treatment for
agro-industries such as Palm oil Mill, ethanol industry, paper and pulp and municipal waste water up to
the recycled grade. Biogas (Bioenergy) captured from AnaEG can be utilized for boiler and power
generation.
Ronser has a portfolio of clients that includes China’s biggest brewery, China Resources Snow Brewery,
China Petrol, Coca Cola and China’s largest instant noodle manufacturer, Master Kang, Penang Apparel,
Vietnam Apparel, China Textile, Sang Soon Seng, Johor, AVM POME Columbia.
1. Biogas capturing for palm oil Mill for power generation and boiler use.
2. Solve palm oil mill waste water treatment problem to meet Standard A/B & water recycling
required.
3. Solve other industries waste water treatment plant problem who cannot meet DOE requirement or
would like to recycle their water for reuse.
1. Secure some project in textile factories waste water treatment system in Penang, China &
Vietnam
2. Successfully commissioning Palm oil Mill Zero discharge plant in Labu, Malaysia
3. Have secured many projects in Ethanol waste water treatment plants in China
We Offer: Collaboration of Public Procurement, Contract Manufacturing, Distributorship/ Agency, Global
Product Sourcing, Joint Venture, Marketing Services, Trading of Carbon Credit, Foreign Direct Investment
(FDI, Joint R &D, and Proprietary Consultancy
We Request: Green Procurement, CDM Development, Foreign Direct Investment (FDI), Merger and
Acquisition, Project Financing, Venture Capital, Proprietary Consultancy, Technology Acquisition
Number of Staff: 17
Annual Business Turnover (€): RM 2 Million
Contact Person(s):
Alan Tong, Marketing Manager
64
Rubberflex Sdn Bhd
Focus Area: Energy
Rubberflex was incorporated in 1986 with the specific aim of producing the best available rubber thread
from natural latex. Rubberflex has become the largest and most advanced manufacturer of extruded latex
threads in the world, with a marketing arm that encircles the globe. Rubberflex was the first rubber thread
company to export throughout the world from Malaysia and this unique position requires the company to
meet industry demands for specialty threads
Rubberflex is currently looking for biomass fuel supply in terms of palm kernel shell and wood pallet that
can generate heat.
Rubberflex was granted ISO 9001:2008, which is the international benchmark standard for ‘quality
management’. This is what we do to enhance our customers’ satisfaction and meets their requirements.
Rubberflex is World's Largest Manufacturer of Quality Latex Thread. We export throughout the world and
provide full count range from 16 to 140. We produce full range of qualities in RX form which include the
food grade, high modulus, super heat resistant, etc. Rubberflex was awarded Industry Excellence Award
Rubber Products Sector 2010/2011.
We Request: Collaboration of Public Procurement, Contract Manufacturing, Distributorship/ Agency ,
Global Product Sourcing, Import/ Export, Joint Production, Joint Venture Management Contract,
Marketing Service, Resellership, Trading of Carbon Credit, Green Procurement, CDM Development,
Commercialisation of R & D, Contract Research, Joint R & D, Proprietary Consultancy, Technical
Assistance, Technology Acquisition, Technology Licensing, Technology Transfer, CDM Development,
Foreign Direct Investment (FDI) Merger and Acquisition, Project Financing, Venture Capital
Number of Staff: 2
Contact Person(s):
Long Cheng Cheng, Purchasing Executive
Chan Sze Yean, Purchasing Assistant
65
SJ SECURITIES SDN BHD
Focus Area: Consultancy / M & A
We have clients (Public Listed Companies) and SMEs who are keen to look for mergers and acquisition
opportunities especially in the area of green energy and biomass related businesses.
Potential Business and Environmental Collaboration to Offer/Request: Organisation's Achievements:We Offer:
Trading of Carbon Credit, Green Procurement, Proprietary Consultancy, Technical
Assistance, Technology Acquisition
We Request: Trading of Carbon Credit, Green Procurement, Proprietary Consultancy, Technical
Assistance, Technology Acquisition, Foreign Direct Investment (FDI), Merger and Acquisition, Project
Financing, Venture Capital
Contact Person(s):
Peter Lim, Deputy Managing Director
66
SP MULTITECH RENEWABLE ENERGY SDN BHD
Focus Area: Energy, Eco-product, Biogas Plant Development
SP Multitech Renewable Energy Sdn Bhd is part of the well-established SP Multitech Group of
Companies which has been involved in environmental engineering projects since 1996. The company is
dedicated to the promotion and development of green or renewable energy, specializing in biogas
technology and green electricity generation, and providing ‘waste to energy’ solutions. We design and
build biogas plants, and supply biogas technology equipment, including biogas power generators.
Using German technology for both wet and dry fermentation anaerobic digestion processes, we are able
to convert all kinds of organic wastes into renewable energy in the form of biogas or green electricity.
We would like to offer:
Biogas technology equipment, including biogas power generators (CHP), assembled or fabricated in
Malaysia in order to get a competitive pricing advantage. From our client’s biogas plants, or our own
plants in the future, we also have biofertilisers which we can offer competitively after the specifications
have been sorted out with potential buyers.
We request:
Marketing services for the above products.
For future large projects, we will need the support of financiers or venture capitalists. Such projects
include the ‘zero-waste parks’ for treating and disposal of large quantities of municipal solid wastes, using
the dry fermentation anaerobic digestion (DFAD) technology for the organic portion to produce biogas
and generate electricity.
Over the last 16 years, the Group has completed more than 300 sewage treatment plants, pumping
stations and leachate treatment facilities in Malaysia. As an environmentally conscious organization, and
in view of the serious threats posed by the global warming phenomenon, we have set up SP Multitech
Renewable Energy Sdn Bhd to venture into green technology, specializing in ‘waste to energy’ solutions
via biogas technology and biogas power generation. To fast track our technological capability, and
knowing that Germany is the most advanced in this field, we have identified a German technology partner
and signed a Transfer of Technology Agreement with them.
After actively promoting biogas ‘waste to energy’ technology in Malaysia over the past two years, we have
been awarded an EPCC contract to build the first commercial scale biogas plant for a large chicken layer
farm, due for commissioning soon. This is the first in Malaysia, and encouraged by this first project, other
large layer farm operators are now seriously negotiating with us to build biogas plants for them. We
expect to achieve similar successes with our ‘waste to energy’ solutions for Municipal Solid Waste (MSW)
and palm oil mill effluent (POME) very soon.
We Offer: Contract Manufacturing, Distributorship/ Agency, Import/ Export, Joint Production
We Request: Import/ Export, Marketing Service, Project Financing, Venture Capital
67
Number of Staff: 50
Annual Business Turnover (€):6 million
Contact Person(s):
William Tan Soo Peng, Chief Executive Officer
K Y Lim, Director
68
SYARIKAT KAMAJU SDN BHD
Focus Area: Energy, Bioethanol from Molasses (Biofuel)
st
This company starts up in 1 August 1986. We are the Trading House with White Sugar Distributor and
Wholesaler of the Malayan Sugar Manufacturing Co. Bhd. and Kilang Gula Felda Perlis Sdn. Bhd from
PENANG STATE. Then in 1996 onwards we were full considered as the Distributor of MSM because we
do more support in the SME or SMI in Food and Beverages Industries since most of the factories are
doing export and looking for the Certificate of Analysis support. The MSM is the largest SME, SMI
Industries with the share of 46% and Felda Perli Sugar Factory which is owned by the Sugar King, Robert
Kuok, has the share of 10% in the white sugar supplies to the Malaysia Market. We are a subsidy
Marketing Arm presenting MSM to involve in the White sugar industries supplies and we are one of the
largest suppliers in the Northern Region by 2004.
We are appointed as a Sugar Cane Molasses Distributor which is also the Northern Region Largest
Suppliers. Currently the MSM Holding (MALAYSIA) Bhd is a Public Listed Company in Bursa Malaysia
Main Board by 2011 and is taking over by Felda Global Venture Sdn Bhd by October 2010 which is a
Government Link Company under Felda Group of Companies.
Waste to Bioethanol, we have the Raw Materials to do Bioethanol which is called as Sugar Cane
Molasses. Currently we are looking for Technology Transfer or Joint Venture in biofuel industries in
Malaysia though the biomass to biofuel or biofertiliser, biogas and bioenergy to generate the electricity.
We are also looking into the use of sugar bagasse as biomass to produce bioethanol and generate
electricity as Energy Efficiency. We are seeking for the Funding to set up our plants refinery for the
Biofuels, also looking for the Joint Venture in the Technologies transfer or technologies undertaken or
Technologies licensing. Besides that, we are seeking for Venture Capital to be a partner for future expend
need, we will be looking for the International Bioethanol Business n Molasses Business deal n Supplies.
We are currently the Biggest White Sugar Suppliers in Penang State and the only Molasses supply in the
northern region on behalf of MSM Sugar Refinery, in 2008. We are one of the Top 5 Winners in the
Malaysia White Sugar Suppliers list by Malayan Sugar Manufacturing co. Bhd. Currently we are still the
main supply to the SME, SMI Industries. Our major customers are from Food and Beverages Industries,
and most of the customers are big players in the industries. We have served the industries for almost 25
years.
We Offer: Contract Manufacturing, Distributorship/ Agency , Global Product Sourcing , Import/ Export ,
Joint Venture, Marketing Service , Reseller ship, Trading of Carbon Credit , Green Procurement, CDM
Development , Foreign Direct Investment (FDI), Merger and Acquisition , Project Financing , Venture
Capital , Contract Research , Joint R & D , Technology Transfer , CDM Development.
We Request: Contract Manufacturing , Distributorship/ Agency , Global Product Sourcing , Import/ Export
, Joint Venture , Marketing Service , Reseller ship, Trading of Carbon Credit , Green Procurement , CDM
Development , Foreign Direct Investment (FDI) , Merger and Acquisition , Project Financing , Venture
Capital , Proprietary Consultancy , Technical Assistance , Technology Acquisition , Technology
Licensing ,Technology Transfer , CDM Development.
69
Number of Staff: 10
Annual Business Turnover (€): 2.4 million
Contact Person(s):
Tommy Neoh Choo Soon, Director
70
SAWIPAC SDN BHD
Sawipac was established in 1996 and core businesses are providing Palm Oil Industry with New Process
Systems and Biomass Energy Solutions (refer www.sawipac.com)
Today, Sawipac Products are exported globally to world Palm Oil Growers Countries – West Africa,
Asean, Papua New Guinea and Latin America. Sawipac also undertakes Turn-key Projects for New
Process and Biomass process.
Sawipac has developed Biomass Energy products which process Palm Oil Biomass Residue and Waste
woods into value Added Products briquette and pellets.
Today, Sawipac is interested to venture into Biomass briquette and Pellet Production Plant and is
sourcing for financial Assistance for the New Venture.
Sawipac achievements are as follows:1) Certified ISO Company in 1996 on
- Quantity Management system.
- Design and Manufacturing Palm oil System and Module.
2) Obtained Manufacturing Licence in 2011.
3) Shortlisted 3 firma lists for Sirim 2011, Innovation Awards.
4) 2011, Top 20 SME E50 Awards.
We Request: Marketing Service, CDM Development, Project Financing
Number of Staff: 39 persons
Annual Business Turnover (€): € 4 MILLION
Contact Person(s):
Neo Teck Siong, Manager Director
71
TC ENERGY RESOURCES
TC Energy established since the year 2008. The company has established to focus in local and export
trading palm oil related agriculture product, such as oil palm fruit, oil palm fibre (mesocarp fibre),
shredded EFB, palm kernel shell, wood chip, wood briquette, sawdust and sawdust briquette.
Our products were mainly used by the industrial sector as biomass fuels and green energy sectors which
include power plant. We covered in logistic service through-out Malaysia.
Thus, we will do the best on our part to ensure that our products and services are always at its best
quality and we are looking forward to cooperating with buyers form local and overseas to create mutual
benefit for all parties concerned.
We are looking for oversea genuine customers who import solid fuels.
We are looking forward to implement the technology in order to invent solid fuel to fulfill oversea
customers and demands.
Proposal of biomass development will be discussed.
We Offer: Import/ Export
We Request: Import/ Export
Number of Staff: 10
Annual Business Turnover (€): RM 6 mil
Contact Person(s):
Bryan Teh, Sales Director
Nick Lim, Sales Executives
72
TCOM Power Sdn Bhd
Focus Area: Energy, Telecommunication
TCOM Power Sdn Bhd and its subsidiary T-C-O-M Power INC (Philippines) are involved in green,
efficient and advanced technology for
A) turn-key energy projects and
B) Off grid projects either for rural communities or Telecoms.
Further we provide Consulting-, Engineering-, Installation & Commissioning-, Implementation and O&M
services. In terms of Biomass dedicated Biomass production (crops and algae) and its use in gasification
for energy production are our interests.
We offer to open the market for potential key technology holders to Malaysia and the Philippines.
Energy production from Biomass – we are interested in advanced technology – operation and
maintenance. Projects shall be developed together with technology holder.
Financing includes equity position to be discussed.
TCOM Power Sdn Bhd was incorporated in Malaysia in December 2011. As a start up company
achievements are not available at the time of submission of this from.
We Offer: Distributorship/ Agency, Joint Production, Joint Venture, Resellership, Trading of Carbon
Credit, CDM Development
We Request: Trading of Carbon Credit, CDM Development, Commercialisation of R & D, Contract
Research
Number of Staff: <10
Annual Business Turnover (€): n.a.
Contact Person(s):
Dipl. Ing. Rainer Gehrling, Director
Gladys Yanong, VP - Business Development
73
TAIM WESER SEA CO. LTD
Focus Area: Energy, Eco-product, Material Handling Equipments
TAIM WESER is the world leading company with the field of Renewable Energy (Biomass and Wind
power), material handling, lifting equipment, waste treatment plant, committed to innovation and
technology.
2
Our head office is located in Zaragoza (Spain) in a 64,000m factory. We have central office in
Oeynhausen (Germany), factory in Curitiba (Brazil) and branch and representative office in almost
countries all over the world.
We have an R+D+I department where research programs are carried out for creating new products, and
an Engineering Department where we develop our projects with our own technology and patents.
We supply turn-key products with a high technological degree in any country in the world. We have highly
specialized workshops, equipped with state of the art machinery, which manufacture the key components
according to the most demanding quality controls, and through our team for erection and commissioning,
we ensure the best fulfillment of the whole manufacturing process.
Our commitment continues after delivery. With our after sales service, we ensure our clients quick
assistance to whatever eventually and a fast response to solutions and spare parts.
All this have turned TAIM WESER into an international point of reference and places our company in the
best conditions to offer our clients the most advanced and, at the same time, the most competitive
solutions.
TAIM WESER owns technology, amongst other fields (bulk material handling, lifting, urban waste
treatment), in the gasification of woodchips for the high performance production of electrical and thermal
power (grid connected or island). The company also holds strong know-how and experience in renewable
energy projects development (biomass energy and wind energy). The company is willing to explore
business opportunities in the region through potential partnerships for the installation of its gasification
technology. We are looking for synergies with local companies interested in cooperating with us through
the whole product lifecycle (commercial/development, production/sourcing, installation, commissioning,
service).
The technology development has its roots in the in-house skilled team as well as in the cooperation with
Universities and Technology Institutions (i.e., the biomass gasification product is a sample of how the
company usually acts in R&D, setting projects where the basic research is done in the University
/Technology Institution and the development is performed by TAIM WESER specialized teams. This way
we can offer leading-edge products in our four core activities, as, as an example, in biomass gasification.
We Offer: Collaboration of Public Procurement, Contract Manufacturing, Distributorship/ Agency, Import/
Export, Joint Production, Joint Venture, Green Procurement, CDM Development, Commercialisation of R
& D, Joint R & D, Technical Assistance, Technology Acquisition, Technology Transfer, CDM
Development, Foreign Direct Investment (FDI), Merger and Acquisition
We Request: Global Product Sourcing, Management Contract, Marketing Service, Commercialisation of
R & D, Contract Research, and Joint R & D
74
Annual Business Turnover (€): 80 millions
Contact Person(s):
Luis Monge, Director Renewable Energy
Simon A. Whalley, Sales Director
Enzo Filoni, Sales Manager SEA
75
VATA VM SYNERGY (M) SDN BHD
Vata VM is involved in the production of premium quality organic fertilizer and soil conditioner thru
composting process using biomass produce from palm oil mills such as empty fruit bunch (EFB) and
POME. Conversion of EFB and POME into compost offers an alternative solution to oil palm industry
waste disposal. Composting system reduces methane gas generation, one of the greenhouse gases, and
minimizes the risk of river pollutions by palm oil mill effluent. Compost improves the fertility and profile.
Currently, the organic fertilizer that is produced is marketed nationwide to farm owners, plantation owners
etc. Vata VM is also involved in agro waste management together with Waste Solutions (A Member of
CPG global, New Zealand) by marketing Biogas Technology for Palm oil millers in Malaysia and
Indonesia. Biogas can be used to replace natural gas, liquid gas like petrol, diesel and boiler fuel or to
produce electricity and heat. Fourthly, the company is also a distributer to EP Asia products which is
ecofriendly nontoxic, nonflammable & Biodegradable cleaners –coating & waterproofing system.
Potential Business and Environmental Collaboration to Offer/Request: We have established a JV company with the largest Cooperative in the Country, National Land Finance
Corporation (NLFCS). Our JV Company Minsawi Vata Biofertiliser Sdn Bhd has been formed to convert
NLFCS palm oil mill waste into organic fertilizer/soil conditioners to be applied back to NLFCS plantations.
We have applied for GTFS fund; however we are open to third party investment.
VATA has also drawn up collaboration plan with 4 entities:
1. Sime Darby Plantation.
2. Kuala Lumpur Kepong Plantation KLK
3. Private Millers.
We are already in negotiation with some of the above entities to establish a composting plant to produce
biofertilizer and compound fertilizer. Some of them who have Plantations with mill, therefore the end
product can be applied to their plantation under a guaranteed buyback scheme with a set period of
concession. Private millers usually do not have plantation, therefore we plan collaborate with Our plan is
to forerunner in establishing our brand “VATA ASLI” range of fertilizer to be marketed locally and for
exports.
We aim to implement ISO 14001 Environmental Management System (EMS) in our composting plant
which is currently under construction and expected to be ready for implementation of EPP in 12-18
months’ time.
Conversion of EFB and POME into compost offers an alternative solution to oil palm industry waste
disposal. Composting system reduces methane gas generation, one of the greenhouse gasses, and
minimizes the risk of river pollution by palm oil mill effluent. Compost improves the soil fertility and profile.
More importantly, the use of compost could reduce the use of inorganic fertilizer and manuring cost. The
current utilization of EFB and POME as compost has yet to be maximized due to the dependency on
inorganic fertilizer as nutrient supplement.
76
The organic fertilizers are safe for use and promotes healthy and improved environment for inhabitants.
The organic fertilizer produced via this project contains insoluble nitrogen and are slow release fertilizers
whereby their effectiveness can be greater than conventional nitrogen fertilizers. It promotes high crop
yield by preventing crop disease, increases the output and improves quality of the crops. The usage of
organic fertilizer promotes organic industries which is essential in supporting sustainable eco system that
will ensure the quality of life on our planet.
•
Mr. Murugesu M.Narasimha, Our Managing Director, is one of the members in the panels
th
involved in drawing up the Technology Roadmap for Biomass in SIRIM on 7 to April 2010.
•
The company’s composting project is recognized by the Green Technology Financing Scheme.
•
Vata has qualified to receive “Green Tag” for its process under the producer category. Hence we
are eligible for a RM 50 million soft loan under the Green Tech Financing Scheme from the
Government.
We are one of 44 SME selected by Bio-Mass SP under their Nurturing programme.
•
Waste Solution (our partner in providing biogas technology solutions) presented a paper on cost
effective Biogas Entrapment from POME for power generation during the international conference
on palm oil business OCT 2010 at MATRADE.
We Offer: Export, Joint Venture, Joint R&D
We Request: Distributorship /Agency, marketing Service, Foreign Direct Investment (FDI)
Number of Staff: 6
Contact Person(s):
Datuk Sahadevan, Advisor
Sivashanmuga Reddy, Director
77
WARIS NOVE SDN BHD
Focus Area: High Value Chemical
th
Waris Nove Sdn Bhd is a fully owned Malaysian Company which incorporated on 20 August 2004. The
Company was set up by a group of professionals to actively manufacture biomass to produce
Carboxymethylcellulose (CMC) from Agro-Based product. This project represents commercialization of
research results which comes under the programme of ‘Transfer of Technologies (TOT)’ by Malaysian
Palm Oil Board (MPOB). The Company signed the Memorandum of Agreement (MOA) with MPOB to
nd
commercialize their technology to produce CMC from Oil Palm Empty Fruit Bunch (EFB) on 22 May
2008.
From MPOB’s R&D process technology, we develop the process and equipment design for a commercial
plant set-up to produce Cellulose, as an intermediate product and CMC as a final product with an annual
capacity of 1200mt. CMC is an anionic, water soluble and biodegradable polymer on natural basis and it
is also the most versatile of all water soluble hydrocolloids. Thus, CMC is a Hydrophilic Polymer that can
act in increasing the viscosity and the stability of foodstuff. CMC is widely used in various industries such
as food, pharmaceuticals and cosmetics. Other industries for example detergents, drilling fluids, glue,
ceramics, dye and paint stuffs also make use of CMC.
Waris Nove will initially produce CMC of technical grade to cater the detergent industry for import
replacement before developing for food grade CMC within two years of operation.
The company requires assistance in achieving the ISO 14001 on Environmental Management System
(EMS). We need the coaching based on zero knowledge from all aspect.
From business’s view, we need the assistance on market potential for EU, business matching coaching
and the possible on business ventures for future expansion and also looking in the area of product quality
to match the need of EU market. This may be in the form of existing standards by EU markets or to
develop new products standards.
Environment Performance Plan:
Oil Palm Empty Fruit Bunch (EFB) which is a by-product of Oil Mill factory is widely available of which
about 65% of EFB is either incinerated for bunch ash or recycled back to plantation as mulching or used
as solid fuel in the boilers to generate steam and electricity for the mills. By removing the lignin in the
EFB, we are able to produce Cellulose which is bio-polymer, bio-degradable, tasteless, odourless and
non-toxic which has various application for food and non-food industry. Cellulose from EFB in the form of
its derivatives, Carboxymethylcellulose is also bio-degradable, odorless, tasteless and non-toxic.
By maximizing the utilization of empty fruit bunches to form products of high value which not only comply
with the zero waste strategy, but also contributes to the reduction of greenhouse gases (GHG) to further
mitigate global warming. The Company is planning to implement Environmental Management System
(EMS) ISO 14001 in the company manufacturing operation to ensure that the environmental aspects in
producing Cellulose and CMC are carefully managed.
78
1. This project represents commercialization of research results which comes under the programme
of ‘Transfer of Technologies (TOT)’ by Malaysian Palm Oil Board (MPOB). The company
signed the Memorandum of Agreement (MOA) with MPOB on the production of
nd
Carboxymethylcellulose from Oil Palm Empty Fruit Bunch on 22 May 2008.
2. The company has been acknowledged by Malaysian Industrial Development Authority (MIDA)
through approval of Pioneer Status application; Galakan Taraf Perintis Di Bawah Akta
Penggalakan Pelaburan, 1986 Bagi Mengeluarkan ‘Cellulose and Carboxymethylcellulose
th
from Palm Oil Empty fruit Bunch’ on 19 January 2010.
3. Free Trade Sales Certificate for the product Cellulose from Ministry of Health Malaysia (MOH)
4. Patent No. MY-142372-A (Granted & Published) from Intellectual Property Corporation of
Malaysia (MyIPO).
5. Non-Disclosure Agreement (NDA) with Universiti Malaysia Pahang (UMP) in “The Recovery of
th
Sodium Hydroxide in the Filtrate” project. The NDA was signed on 7 April 2011.
6. Memorandum of Agreement (MOA) with FELCRA BERHAD on production of Cellulose from Oil
th
Palm Empty Fruit Bunch. The MOA has been signed on 15 November 2011.
7. Trademark Registration Application No. 2011003653 with Intellectual Property Corporation of
Malaysia (MyIPO). Our Trademark already being registered at Malaysia, India and Indonesia.
We Offer: Export, Joint Venture, Joint R & D, Joint R & D
We Request: Joint R & D, Contract Research, Marketing Service, Project Financing, Venture Capital
Number of Staff: 18
Annual Business Turnover (€): N/A
Contact Person(s):
Razmi Alias, Chief Executive Officer
Ahmayuddin Ahmad, Chairman
Nadzrihan Hassan, Senior Vice President, Business Development
Mohd Zulkarnaini Wahab, Senior Vice President, Project
79
WEIMAR ENTERPRISE SDN BHD
Focus Area: De-Compositing System for the Organic Waste
WESB is a Vertical Integration business model in a Combination of Three (3) Main Industries, which are;
1. Organic Waste Management Industry
2. Recycling Industry in De-composting Field
3. Developing a Sustainable Production (SP) of Municipal Biomass Industry
The main intention of the company is completing the cycle of waste recovery to a sustainable production
of resources through agricultural activities. Biological technology process is the key stone to transform
organic waste to a renewable energy. WESB had been involved in environmental business activities for
well over a decade
Potential Business and Environmental Collaboration to Offer/Request: A successful sustainable business model is to fulfill human need, we should contribute the climate
change mitigation effort to reduce methane and greenhouse gas release from landfill or during garbage
truck transportation to landfill, and we can eliminate this problem through On-Site aerobic de-composting
system. Following of rehabilitated of organic waste, we also can researching on recycle compost as a bio
fertilizer to enrich the mother earth nutrient beside to provide local municipalities with a feasible and costeffective alternative to increase landfill waste. With the reaps benefits from the upstream industry,
compost made from organic waste will fertile to the soil and it will harvest some good and quality organic
vegetable and fruits beside on using chemical fertilizer which will be harmful to the soil and human health.
Ultimately, we aim to integrate this business model into one sustainable business cycle.
We are searching for a potential European partner who can collaborate with the company in the sales
expansion of Bio Compost Fertilizer to the EU countries by providing advisory service and market access.
Technology providers whose expertise in regulating the quality of organic fertilizer will be taken into
serious consideration for partnership possibility
We Offer: Collaboration of Public Procurement, Contract Manufacturing, Distributorship/ Agency, Global
Product Sourcing, Management Contract, Resellership, Green Procurement, Proprietary Consultancy,
and Technology Licensing, Technology Transfer
We Request: Import/ Export, Joint Production, Joint Venture, Marketing Service, Trading of Carbon
Credit, CDM Development, Commercialization of R&D, Contract Research, Joint R&D, Technical
Assistance, Technology Acquisition, CDM Development, Foreign Direct Investment(FDI), Merger and
Acquisition, Project Financing, Venture Capital
Number of Staff: 25
Annual Business Turnover (€): € 735,000 or MYR 3,000,000
Contact Person(s):
Khor Jin Wei, Division Manager
Wallace Lee Wan Heng, Key Account Manager
80

taim weser sea co. ltd

Transcription

Similar documents

Zhulian-USM Joint Laboratory - School of Industrial Technology

Ridingon clean power

Synopsis and proposal

FA Newsletter 3rd edition

Majulia 2014 v5

Brahim`s caps meals at RM10

Harta Packaging Industries (Selangor) Sdn. Bhd.

Innovating New Directions - Konsultant Proses Sdn Bhd

progressive impact corporation berhad (“picorp”) a total

Natural Wellness Industries