deburring cutting punching drilling heben lifting

www.alfra.de
PUNCHING
DRILLING
HEBEN
LIFTING
CUTTING
DEBURRING
11/2015
Hydraulic Devices
battery driven-Compact Flex™
Compact Flex™
Technical Data:
Technical Data:
Punching capacity
(subject to correct choice of ALFRA punching tools)
Round holes: up to 152 mm Ø
in 3,0 mm mild steel
up to 120 mm Ø
in 2,0mm stainless steel
Punching capacity
(subject to correct choice of ALFRA punching tools)
Round holes: up to 152 mm Ø
in 3,0 mm mild steel
up to 120 mm Ø
in 2,0mm stainless steel
Shaped holes: up to 138 x 138 mm
in 2,5 mm mild steel or 2.0 mm stainless steel
Drive
Punching force 75 kN, 16800 lbs with pressure control
valve up to 680 Bar/9850 psi
Pressure sensor auto-recognition of the punching
breakthrough
Rechargeable battery 18 V, Li-Ion 1.5 Ah
Charging time
30 min. after complete discharge
Weight
2.5 kg / 5.5 lbs incl. 1.5 Ah battery
Shaped holes: up to 138 x 138 mm
in 2,5 mm mild steel or 2.0 mm stainless steel
More Highlights
• Automatic return
• USB-slot, readout data
• Service interval indicator
SKP-1
Hydraulic cylinder
Technical Data:
Hydraulic cylinder SKP-1 with quick coupling (up to 11 t)
Weight: 2.5 kg
Prod.-No. 02012
SKP-1
Mini
Hydraulic cylinder
Punching force: 75 Kn
Operating pressure max.: 650 bar
Hydraulic hose length: 600 mm
Weight: 2.0 kg
Contents:
• 1 Compact Flex™ hand hydraulic punch
• 1 Hydraulic screw Ø 19.0 x 9.5 mm
• 1 HSS pre-drill Ø 11.0 mm
• 1 Set of distance bushes, 3 pieces
In a sturdy and practical plastic case with exactly cutted inlay
and rubberized handle for easy handling.
In a sturdy and practical plastic case with exactly cutted inlay
and rubberized handle for easy handling.
Technical Data:
Prod.-No. 02082
Compact™
Hand-operated Hydraulic Punch Driver Straight
Prod.-No. 02065
CompactCombi™
Hand-operated Hydraulic Punch Driver 90°
Technical Data:
Technical Data:
Punching capacity
(subject to correct choice of ALFRA punching tools)
Round holes: up to 152 mm Ø
in 3,0 mm mild steel
up to 120 mm Ø
in 2,0mm stainless steel
Punching capacity
(subject to correct choice of ALFRA punching tools)
Round holes: up to 152 mm Ø
in 3,0 mm mild steel
up to 120 mm Ø
in 2,0mm stainless steel
Shaped holes: up to 138 x 138 mm
in 2,5 mm mild steel or 2.0 mm stainless steel
Punching force: 75 Kn
Operating pressure max.: 680 bar
Weight:
1.45 kg
Shaped holes: up to 138 x 138 mm
in 2,5 mm mild steel or 2.0 mm stainless steel
Prod.-No. 02001
Punching force: Operating pressure max.: Weight:
75 Kn
680 bar
1.75 kg
Hydraulic cylinder SKP-1 Mini with quick coupling (up to 7 t)
Weight: 0.86 kg
Prod.-No. 02013
AHP 03-01
Electro hydraulic pump
Prod.-No. 02050
Technical Data:
Compact™ hand hydraulic Straight
Punching set TriCut™ M16 - M40
CompactCombi™ hand hydraulic 90°
Punching set TriCut+™ M16 - M40
Contents:
• 1 aluminium Compact™ hand hydraulic punch
• 5 TriCut™ punches and dies M 16 - M 40
• 1 Hydraulic screw Ø 19 mm
• 1 Hydraulic screw Ø 19 x 9.5 mm
• 1 HSS pre-drill Ø 10 mm
• 1 set of distance bushes (3 pieces)
Contents:
• 1 aluminium CompactCombi™ hand hydraulic punch
• 5 TriCut+™ punches and dies M 16 - M 40
• 1 Hydraulic screw Ø 19 mm
• 1 Hydraulic screw Ø 19 x 9.5 mm
• 1 HSS pre-drill Ø 10 mm
• 1 set of distance bushes (3 pieces)
for mild steel S 235
Prod.-No. 01765
www.alfra.de
for mild steel S 235
Motor voltage: 230 V/50 Hz
(110 V/50 Hz + 60 Hz on request)
Motor output: 0.55 kW
Max. operating pressure: 700 bar
Pump capacity: 0.52 l/min. at 50 Hz
Tank volume: 2.5 l/useful volume 1.5 l
Weight: 17 kg
Dimensions L x W x H: 330 x 180 x 350 mm
Contents:
Electro-hydraulic pump AHP 03-1 with hand switch, 2.0 m
hydraulic hose with quick coupling
Prod.-No. 03853
Prod.-No. 01766
Option:
Foot switch with 2 pedals, start-stop function
Prod.-No. 03866
Punching
Special tools
FormCut™ square
• For mild steel (S 235)
• All punchers have a lateral ejection for the waste piece. No
jamming inside the die
• The punchers are delivered in robust and practical plastic cases
• When placing an order for hydraulic operation please
specify the hydraulic model
Punching tools for hydraulic operation, 46 x 46 mm, max.
material thickness 3 mm S235)
FormCut™ rectangular
for heavy connectors
• For mild steel (S235) and hydraulic operation
• The punching tools are delivered in robust plastic case
• When die and punch are pressed against each other, the
drilling position is marked on the metal sheet between
them. These 4 marks can then be used as a drilling
template.
Punching tool complete for hydraulic operation, 36.0 x 112.0
mm, 24-pin, max. material thickness 2.0 mm (S235)
Prod.-No. 01328
Prod.-No. 01305
FormCut™ rectangular
• For mild steel (S 235)
• All punchers have a lateral ejection for the waste piece. No
jamming inside the die
• The punching tools are delivered in robust plastic case
• Special accessories at hydraulic operation
Punching tool complete for hand- or hydraulic operation, 22.0
x 30.0 mm, max. material thickness 2.0 mm (S235)
FormCut™ Sub-Min-D
• All punchers have a lateral ejection for the waste piece. No
jamming inside the die
• For punching the cut-outs for 9 – 50-pin connectors. Antitwist-protected axes are used as tie bolts for punch and die
• The punching tools are delivered in robust plastic case
• Special accessories at hydraulic operation
Punching tool complete, 9-pin, 19.8 x 11.3 mm, max. material
thickness 2.0 mm (S235)/1.5 mm (stainless steel)
Prod.-No. 01366
Prod.-No. 01319
Punching set
TriCut™
™
ut
C
Tri
Punching set
TriCut+™
+™
ut
C
Tri
Punching set TriCut™ M12 - M40
Punching set TriCut+™ M16 - M40
Contents:
• 1 punch and die each
• M12 – M16 – M20 – M25 – M32 – M40
• 1 BB-screw Ø 6.0 x 40.0 mm
• 1 BB-screw Ø 9.5 x 50.0 mm
• 1 BB-screw Ø 19.0 x 55.0 mm
• 1 pre-drill HSS Ø 10.0 mm
• 1 tin of lubricating paste
• in practical transport case
Contents:
• 1 punch and die each
• M 16 – M 20 – M 25 – M 32 – M 40
• in practical transport case
for mild steel S 235
Prod.-No. 01754
www.alfra.de
for mild steel (S235) and stainless steel sheets
Prod.-No. 01652
FormCut™ Punching Tool
with Notch
• For mild steel (S 235)
• All punchers have a lateral ejection for the waste piece. No
jamming inside the die
• The punching tools are delivered in robust plastic case
• Special accessories at hydraulic operation
Punching tool complete Ø 22.5 with 3 mm nose, max. material
thickness 2.0 mm (S235)
Prod.-No. 01420
Notch pliers
• Easily and quickly punches notches in sheet metal up to
2.0 mm thick
• Notch sizes 3.2 mm and 4.8 mm possible
• Max. material thickness 2.0 mm mild steel (S235)
• Easy punching thanks to large leverage
• Plastic coated handles
• Weight 1.3 kg
Prod.-No. 03015
Mounting Tables
Wiring Duct Cutting Device
Profile Rail Cutting and Punching Device
MOUNTING TABLES
AMT 150
Prod.-No.
Simple and variable fixing of mounting
plates using quick-acting clamps
Intelligent clamping system permits the
unrestricted processing of the complete
mounting plate
Continuously adjustable from vertical to
horizontal position
Continuous height adjustment
AMTE 200
031002
031001
✔
✔
✔
✔
✔
✔
by hand crank or cordless drill
by battery-operated electric motors
by battery-operated electric motors
using angle of tilt
using angle of tilt
by battery-operated electric motors
by battery-operated electric motors
✔
✔
✔
✔
0 - 80°
fixed: 90 cm
0 - 80°
variable: 80 - 110 cm
Electric motor
-
Battery operation
Adjustable angle of tilt
Working height
4 lockable casters
Max. size of mounting plates W x H
Max. load-bearing capacity
Space required
Weight
Scope of supply:
AMTE 250
03100
0 - 80°
fixed: 100 cm
✔
✔
✔
1.100 x 1.900 mm
200 kg
1.400 x 1.200 mm
83 kg
Mounting Table AMT 150
2 x clamping unit with screw
2 x clamping unit with quick release
Screw adapter for operation with cordless drill
1.100 x 1.900 mm
200 kg
1.400 x 1.200 mm
93 kg
Electricatl Mounting Table AMTE 200
2 x clamping unit with screw
2x clamping unit with quick release
External charger for the battery
1.100 x 1.900 mm
300 kg
1.400 x 1.200 mm
140 kg
Electrical Mounting Table AMTE 250
2 x clamping unit with screw
2x clamping unit with quick release
External charger for the battery
Wiring Duct Cutting Device
VKS 125
ALFRA Profile Rail Cutting and Punching
Device PSG5+
For DIN carrier rails, for hand lever operation
for cutting pieces to length and punching holes
lengthways and crossways.
Standard version profiles 35/7.5 – 35/15
C-Profile – 15/5.5 – Cu 10.0 x 3.0 mm
Cuts wiring ducts and covers up to 125
mm width exactly and effortlessly in
seconds.
Technical Data:
• With a reinforced eccentric,
located directly above the
shearing blade
• Burr-free cutting without
waste
• Maintenance-free
• Anodised, laser-engraved length
stop 1,000 mm long with rail-support element for accurate
angled cutting, with millimetre and inch scales
Technical Data:
• Hand lever operation
• Burr-free cutting without waste
• Accurate 90° cuts
• Full-surface support with laser engraving
• Easy to fit to the workbench
Contents:
basic unit with punch for cross and oblong holes 12 x 6.4 mm
1,000 mm length stop and rail-support element
Prod.-No. 031920
Prod.-No. 03001
ALFRA Profile Rail Cutting Device
PSG DUO
For the most common DIN carrier rails,
with hand lever operation
Cuts profile rails 35/7.5 + 35/15 mm
exactly and effortlessly
Technical Data:
Contents:
Complete basis device with length stop and rail support element
11/2015
• With rail-support element for
accurate 90° cuts
• Maintenance-free
• Cutting without waste
• Anodised, laser-engraved length stop 1000 mm long with railsupport element for accurate angled cutting, with millimeter
and inch scale
Prod.-No. 03199
Subject to our general sales conditions
ALFRA Alfred Raith GmbH • 2. Industriestrasse 10 • DE-68766 Hockenheim • Phone: +49 (0) 62 05/30 51-0
Fax.: +49 (0) 62 05/30 51-135 • Internet: www.alfra.de • E-mail: [email protected]
www.alfra.de
PUNCHING
DRILLING
LIFTING
HEBEN
CUTTING
DEBURRING