PRO DJ LINK Setup Guide
Transcription
PRO DJ LINK Setup Guide
PRO DJ LINK Setup Guide Contents How to read this manual The instructions in this manual use the indications below. ! Button names displayed on the main unit of the product, and the screen names on the software are enclosed in [ ]. (Example: [LINK] button, [UTILITY] screen) ! The version of rekordbox for mobile devices is referred to as “rekordbox (iOS/ Android) ”. ! The version of rekordbox for Mac/Windows is referred to as “rekordbox (Mac/ Windows)”. “rekordbox” is used to indicate the versions of rekordbox and rekordbox (iOS/Android) simultaneously, as well as when referring to rekordbox functions directly. Before start Purpose of this guide........................................................................................................3 General description of PRO DJ LINK...............................................................................3 To make connections........................................................................................................4 About trademarks and registered trademarks...............................................................4 Connecting DJ player (Group A) and DJ mixer (Group A) Connecting rekordbox by wireless LAN...........................................................................5 Connecting rekordbox via cable/Setting the mobile device (iOS/Android) or storage device (USB/SD)..............................................................................................8 Connecting DJ player (Group A) and DJ mixer (Group B) Connecting rekordbox by wireless LAN.........................................................................11 Connecting rekordbox via cable/Setting the mobile device (iOS/Android) or storage device (USB/SD)............................................................................................14 Connecting DJ player (Group A) and other DJ mixers Connecting rekordbox by wireless LAN.........................................................................17 Connecting rekordbox via cable/Setting the mobile device (iOS/Android) or storage device (USB/SD)............................................................................................19 Connecting DJ player (Group B) and DJ mixer (Group A) Connecting rekordbox via cable/Setting the storage device (USB/SD).....................21 Connecting DJ player (Group B) and DJ mixer (Group B) Connecting rekordbox via cable/Setting the storage device (USB/SD).....................24 Connecting DJ player (Group B) and other DJ mixers Connecting rekordbox via cable/Setting the storage device (USB/SD).....................27 2 En Before start Before start Purpose of this guide This guide describes the procedures for making the connections required to use the PRO DJ LINK functions. General description of PRO DJ LINK To enable various PRO DJ LINK functions proposed by Pioneer, use wireless LAN or LAN cable 1 to connect a mobile device (iOS/Android) or a computer (Mac/Windows) on which DJ player, DJ mixer or rekordbox supporting PRO DJ LINK are installed. The main functions that can be achieved by PRO DJ LINK are as follows: ! Music files in various media such as smartphones and tablets 23, computer 3, USB device, or SD memory card 4 etc., are transmitted by wireless methods 2 or with LAN/USB cable, and these files can be shared/played on a maximum of 4 players 5. ! Music of a maximum of 4 DJ players can be played by automatically adjusting the tempo and beat, by installing the BEAT SYNC 2 function. ! The channel status (on air status and channel number) can be checked instantaneously. ! The quantize function makes it possible to apply beat effects in tempo with the music. Besides this, functions can be enhanced further by using a combination of DJ player and DJ mixer supporting PRO DJ LINK. For details, see the respective operating instructions. 1 2 3 4 5 Use a LAN cable of CAT5e or higher. Supports only CDJ-2000NXS/CDJ-900NXS/XDJ-1000. rekordbox must be installed. Only CDJ-2000NXS/CDJ-2000 are supported. Music files in CD/DVD cannot be shared. About SD memory cards In the subsequent explanations, SD memory card and USB device are collectively described as “Storage device (USB/SD)”. SD memory card can only be used in the supporting equipment. Type of equipment supporting PRO DJ LINK made by Pioneer This information is as of YY 2014 MM 12 DD 15. For latest information, see the Pioneer support DJ site below. http://pioneerdj.com/support/ DJ players supporting PRO DJ LINK CDJ-2000NXS/CDJ-2000/CDJ-900NXS/CDJ-900/XDJ-1000 DJ mixers supporting PRO DJ LINK DJM-2000NXS/DJM-2000/DJM-900NXS/DJM-900SRT To make maximum use of the PRO DJ LINK function PRO DJ LINK function can be utilized to a maximum using music files analyzed by rekordbox. Mobile device (iOS/Android) or computer (Mac/Windows) on which the rekordbox is installed can be directly connected to the DJ player or music files analyzed by rekordbox can be used by transferring to a storage device (USB/SD). rekordbox can be downloaded free of charge from the following website: http://rekordbox.com/ Recommended rekordbox versions rekordbox (iOS/Android) Ver.1.2.0 or greater, rekordbox (Mac/Windows) Ver.3.1.0 or greater ! For detailed connection and operation method of a mobile device (iOS/Android) or a computer on which rekordbox is installed, see the user’s manual of rekordbox (iOS/ Android) or the user’s manual of rekordbox (Mac/Windows). Mobile device (iOS/Android) that can be connected to each type of equipment with USB cable For mobile devices (iOS/Android) that can be connected by USB cable, see the operating instructions of each type of equipment. En 3 To make connections The connection procedure for using the PRO DJ LINK function differs according to the combination of devices you are using. This manual describes the connection procedures for different combinations of PRO DJ LINK-compatible Pioneer DJ players and DJ mixers. First check the combination of devices you are using on the table below, then connect following the description of the relevant page. ! Ex.: If you are using a CDJ-2000NXS and a DJM-2000NXS, you should follow procedure 1 . Proceed to page 1 . DJ player (Group A) CDJ-2000NXS/CDJ-900NXS/XDJ-1000 DJ player (Group B) CDJ-2000/CDJ-900 DJ mixer (Group A) DJM-2000NXS/DJM-2000 DJ mixer (Group B) DJM-900NXS/DJM-900SRT DJ mixer (Group A) DJ mixer (Group B) Other DJ mixers DJ player (Group A) 1 2 3 DJ player (Group B) 4 5 6 Connecting by wireless LAN ! Use the wireless router (available in the market) and access point (available in the market) which can obtain a sufficient communication speed such as IEEE802.11n, IEEE802.11g etc. Depending on the signal conditions in the usage environment or the wireless router and access point, PRO DJ LINK connections may not operate properly. ! For connection method of wireless LAN, see the operating instructions of the computer or wireless LAN equipment used. About trademarks and registered trademarks ! Pioneer and rekordbox are registered trademarks of the Pioneer Corporation. ! Windows is a registered trademark of Microsoft Corporation in the United States and other countries. ! Mac is a trademark of Apple Inc., registered in the U.S. and other countries. !Android™ is a trademark of Google Inc. ! iOS is a trademark on which Cisco holds the trademark right in the US and certain other countries. ! The names of companies and products mentioned herein are the trademarks of their respective owners. 4 En Connecting DJ player (Group A) and DJ mixer (Group A) 1 Connecting DJ player (Group A) and DJ mixer (Group A) 1-1 Connecting rekordbox by wireless LAN Equipment used ! ! ! ! ! ! CDJ-2000NXS/CDJ-900NXS/XDJ-1000 (1 to 4) Wireless router with internal switching hub or access point Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed DJM-2000NXS or DJM-2000 Audio cable LAN cables (one for each DJ player + one more) Connections diagram (when connecting two DJ players) OFF ON POWER MIC MASTER CD /DIGITAL PHONO USB 1/2 CD /DIGITAL TRIM 1 USB 3/4 LINE 2 3 TRIM OVER OVER DELAY MULTI TAP DELAY ECHO REVERB CH SELECT 4 MIC ROLL A B CD /DIGITAL M CD /DIGITAL PHONO USB 7/8 USB 5/6 LINE TRIM REV ROLL GATE TRANS - TRIM OVER 0 OVER EFFECT SELECT +9 MIC LEVEL - HI +9 10 HI 7 0 -12 +12 -12 +12 LOW TALK OFF ON OVER EQ/ -3 ISO -5 +6 JET ZIP HPF LPF -7 EQ/ ISO +6 -26/ MAX MIN MAX -3 -5 1/4 1/8 1/2 3/4 1/1 2/1 4/1 -7 LEVEL/DEPTH EQ/ ISO +6 -26/ 1 EQ/ -3 -7 -3 ISO -5 -5 +6 -26/ -7 - 10 LOW - 15 - 15 -24 - 24 dB dB MAX 2 0 -2 - 10 LOW -24 AUTO /TAP TAP MIN 4 -1 MID -2 - 15 TIME dB 7 +6 -26/ -1 MID - 10 FILTER 0 -2 -3 +6 -26/ +6 -26/ dB L R +6 -26/ FILTER ON/OFF BALANCE FILTER CUE MIN MAX MIN CUE MIN MIN -5 -24 dB PARAMETER MAX 10 4 2 1 +6 -26/ -1 MIN HI 7 2 0 +9 10 HI 7 1 -7 +9 10 4 HI - 15 -24 FILTER OVER SEND/ RETURN PHASER - 10 LOW - 15 +6 -26/ FILTER MID 0 -2 - 10 LOW SLIP ROLL LOW 1 -1 MID -2 -26/ NOISE +6 -26/ -1 MID INST FX CRUSH 0 EFFECT FREQUENCY 4 2 1 +6 -26/ 10 7 4 2 HI EQ MIN MAX LIVE SAMPLER CUE MAX MIN CUE MAX R L CUE CUE MAX SYNC MASTER LINK MONO STEREO UTILITY CUE WAKE UP 10 10 HEADPHONES MONO SPLIT 8 7 Audio cable 8 7 MIX 6 6 5 5 4 4 MIXING BOOTH MONITOR 9 9 STEREO 3 MIDI 3 REMIX 2 1 2 1 ON /OFF 0 START/STOP 0 0 SNAPSHOT CUE MASTER LEVEL LAN cable (wired) CURVE SETTING ON/OFF CH EQ CUE - 0 A THRU B A THRU B A CROSS FADER ASSIGN THRU B A THRU B CROSS FADER ASSIGN ISOLATOR EQ CH FADER PHONES Wireless CROSS FADER A B PROFESSIONAL MIXER CDJ-2000NXS DJM-2000NXS DJM-2000 nexus CDJ-2000NXS Connection procedure Creating the [PLAYER No.] setting 1 Remove the LAN cable from the equipment and unplug the mobile device (iOS/Android) and storage device (USB/SD) from the DJ player. ! When mobile device (iOS/Android) or storage device (USB/SD) are set, and when LINK connection is established, [PLAYER No.] settings cannot be changed. 2 Turn on the power supply of the DJ player and DJ mixer. 3 Open the [UTILITY] screen of DJ player, and set [PLAYER No.] to [AUTO]. ! For the display method of [UTILITY] screen, see the operating instructions of each DJ player. [PLAYER No.] setting screen ! Set the second DJ player on in the same way. ![PLAYER No.] is set to [AUTO] upon shipment from the factory. En 5 Connecting the cables (LAN cable and audio cables) 1 Connect the wireless router and DJ mixer with LAN cable. 2 Connect the LAN cable and audio cables. Connect in such a way that the DJ player’s [PLAYER No.], the channel number of the DJ mixer’s LAN cable insertion port and the channel number of the terminals to which the audio cables are connected are all the same number. Connect the wireless router/access points to [COMPUTER1] or [COMPUTER2] of DJ mixer. Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the wireless router is connected to [COMPUTER1] CONTROL CD DIGITAL POWER PHONO L CH4 CD R CH3 SIGNAL GND LINE L CH1R CH2 CD LINE CD L 3 CH CH 1 DIGITAL CONTROL OFF ON POWER OUT CONTROL CD DIGITAL CD DIGITAL CH4 CH3 IN CH2 CH1 O) R R MASTER2 REC OUT L MASTER1 R L MASTER ATT. AC IN BOOTH R TRS LINK SEND L R RETURN L(MONO) R CD SIGNAL GND L COMPUTER 1 POWER CONTROL CD DIGITAL R CH 3 CH 1 COMPUTER 1 MIDI OUT L(MONO) USB LINK -6dB -3dB 0dB CH 4 R 1GND PHONO CONTROL CD DIGITAL R CH 2 CH 4 2HOT CH 2 COMPUTER 2 COMPUTER 2 3COLD CDJ-2000NXS CDJ-2000NXS DJM-2000NXS Checking the connections Checking the DJ player’s link established by LAN connection Check that the player number indicated on the DJ player’s screen is lit in white. Connecting to LINK Cannot connect to LINK ! In case the player No. lights up gray, LINK connection is not established. When there is a DJ player that is lighted up in gray, redo the connection procedure once again. ! Similarly, check the other DJ players. Checking that the LAN cable and audio cables are synchronized Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly. Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator. If it does not match, the connection is considered to be incorrect. Redo the connection procedure once again. TRIM TRIM OVER +9 HI OVER +9 10 HI 7 +6 -26/ 4 2 2 1 1 +6 -26/ 0 -1 MID -3 ISO -5 +6 -26/ LOW CDJ-2000NXS ! Similarly, check the other DJ players. 6 En 0 -1 MID -2 EQ/ 10 7 4 -2 EQ/ -3 ISO -7 - 10 - 15 -5 +6 -26/ LOW -7 - 10 - 15 -24 -24 dB dB DJM-2000NXS Checking the device(s) connected by wireless connection 1 Connect the computer or mobile device (iOS/Android) to wireless router or access points with wireless LAN. 2 Press the [rekordbox] button. BROWSE TAG LIST INFO UTILITY BACK TAG TRACK / REMOVE Connecting DJ player (Group A) and DJ mixer (Group A) LINK INFO rekordbox MENU LINK USB SD DISC QUANTIZE TIME MODE AUTO CUE 3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection. The devices that have been recognized are indicated on the DJ player’s screen. rekordbox (iOS/Android) rekordbox (Mac/Windows) 4 Press the DJ player’s rotary selector to authorize the connection. The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen. Ex.: When connecting a mobile device (iOS/Android) and a computer (Mac/Windows) The connection completed screen appears. rekordbox (iOS/Android) rekordbox (Mac/Windows) This completes checking the connections. En 7 1-2 Connecting rekordbox via cable/Setting the mobile device (iOS/Android) or storage device (USB/SD) Equipment used ! ! ! ! ! ! ! CDJ-2000NXS/CDJ-900NXS/XDJ-1000 (1 to 4) USB cable for connecting mobile device (Use the included iPod cable to connect the iPod to the CDJ-2000NXS.) Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed Storage device (USB/SD) on which the music files analyzed by rekordbox are stored. DJM-2000NXS or DJM-2000 Audio cable LAN cables (one for each DJ player + one more) Connections diagram (when connecting two DJ players) OFF ON POWER MIC MASTER CD /DIGITAL PHONO USB 1/2 CD /DIGITAL TRIM 1 USB 3/4 LINE 2 3 TRIM OVER OVER DELAY MULTI TAP DELAY ECHO REVERB CH SELECT 4 MIC A B CD /DIGITAL M CD /DIGITAL PHONO USB 7/8 USB 5/6 LINE TRIM REV ROLL ROLL GATE TRANS - TRIM OVER 0 OVER EFFECT SELECT +9 MIC LEVEL - HI +9 10 HI 7 0 -12 +12 -12 +12 LOW TALK OFF ON OVER EQ/ -3 ISO -5 +6 JET ZIP HPF LPF -7 EQ/ +6 -26/ MIN MAX MIN MAX -7 3/4 1/1 2/1 -24 -7 EQ/ ISO LEVEL/DEPTH 1 EQ/ -3 -7 -3 ISO -5 -5 +6 -26/ -7 - 10 LOW - 15 - 15 -24 dB MAX 2 0 -2 - 10 LOW -24 AUTO /TAP TAP MIN +6 -26/ - 15 TIME dB FILTER 4 -1 MID -2 - 10 +6 -26/ 4/1 7 +6 -26/ -1 MID -3 1/2 0 -2 -5 1/4 1/8 - 15 -24 dB - 24 dB +6 -26/ dB L R +6 -26/ FILTER ON/OFF BALANCE FILTER CUE MIN MAX MIN CUE MIN MAX 10 4 2 1 +6 -26/ -1 MIN HI 7 2 0 +9 10 HI 7 1 - 10 LOW +9 10 4 HI -5 FILTER PARAMETER OVER SEND/ RETURN PHASER -3 ISO - 15 +6 -26/ FILTER MID 0 -2 - 10 LOW SLIP ROLL LOW 1 -1 MID -2 -26/ NOISE +6 -26/ -1 MID INST FX CRUSH 0 EFFECT FREQUENCY 4 2 1 +6 -26/ 10 7 4 2 HI EQ MIN MAX LIVE SAMPLER CUE MAX MIN CUE MAX R L CUE CUE MAX SYNC MASTER LINK MONO STEREO UTILITY CUE WAKE UP 10 10 HEADPHONES MONO SPLIT 8 7 Audio cable 8 7 MIX 6 6 5 5 4 4 MIXING BOOTH MONITOR 9 9 STEREO 3 MIDI 3 REMIX 2 1 2 1 ON /OFF 0 START/STOP 0 0 SNAPSHOT CUE MASTER LEVEL LAN cable (wired) CURVE SETTING ON/OFF CH EQ CUE - 0 A THRU B A THRU B A CROSS FADER ASSIGN THRU B A THRU B CROSS FADER ASSIGN ISOLATOR EQ CH FADER PHONES USB connections CROSS FADER A B PROFESSIONAL MIXER CDJ-2000NXS DJM-2000NXS DJM-2000 nexus CDJ-2000NXS Connection procedure Creating the [PLAYER No.] setting 1 Remove the LAN cable from the equipment and unplug the mobile device (iOS/Android) and storage device (USB/SD) from the DJ player. ! When mobile device (iOS/Android) or storage device (USB/SD) are set, and when LINK connection is established, [PLAYER No.] settings cannot be changed. 2 Turn on the power supply of the DJ player and DJ mixer. 3 Open the [UTILITY] screen of DJ player, and set [PLAYER No.] to [AUTO]. ! For the display method of [UTILITY] screen, see the operating instructions of each DJ player. [PLAYER No.] setting screen ! Set the second DJ player on in the same way. ![PLAYER No.] is set to [AUTO] upon shipment from the factory. 8 En Connecting the cables (LAN cable and audio cables) Connect the LAN cable and audio cables. CONTROL CD DIGITAL POWER PHONO L CH4 CD R CH3 SIGNAL GND LINE L CH1R CH2 CD LINE CD L 3 CH CH 1 DIGITAL CONTROL OFF ON POWER OUT CONTROL CD DIGITAL CD DIGITAL CH4 CH3 IN CH2 CH1 O) R R MASTER2 REC OUT L MASTER1 R L MASTER ATT. AC IN BOOTH TRS R L R L(MONO) R CD SIGNAL GND L COMPUTER 1 POWER CONTROL CD DIGITAL R RETURN CH 3 CH 1 COMPUTER 1 MIDI OUT L(MONO) USB LINK -6dB -3dB 0dB CH 4 R 1GND R LINK SEND PHONO CONTROL CD DIGITAL CH 2 CH 4 2HOT CH 2 COMPUTER 2 COMPUTER 2 3COLD CDJ-2000NXS CDJ-2000NXS DJM-2000NXS Checking the connections Checking the DJ player’s link established by LAN connection Connecting DJ player (Group A) and DJ mixer (Group A) Connect in such a way that the DJ player’s [PLAYER No.], the channel number of the DJ mixer’s LAN cable insertion port and the channel number of the terminals to which the audio cables are connected are all the same number. Connect computer to [COMPUTER1] or [COMPUTER2] of DJ mixer. Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the computer (Mac/Windows) is connected to [COMPUTER1] Check that the player number indicated on the DJ player’s screen is lit in white. Connecting to LINK Cannot connect to LINK ! In case the player No. lights up gray, LINK connection is not established. When there is a DJ player that is lighted up in gray, redo the connection procedure once again. ! Similarly, check the other DJ players. Checking that the LAN cable and audio cables are synchronized Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly. Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator. If it does not match, the connection is considered to be incorrect. Redo the connection procedure once again. TRIM TRIM OVER +9 HI OVER +9 10 HI 7 4 2 2 1 +6 -26/ 1 +6 -26/ 0 -1 MID -3 ISO -5 +6 -26/ LOW CDJ-2000NXS 0 -1 MID -2 EQ/ 10 7 4 -2 EQ/ -3 ISO -7 - 10 - 15 -5 +6 -26/ LOW -7 - 10 - 15 -24 -24 dB dB DJM-2000NXS ! Similarly, check the other DJ players. En 9 Checking the connected device(s) 1 Press one of the medium select buttons to check the connection with the respective device. — To use a computer (Mac/Windows) connected by wired LAN: Press the [rekordbox] button. — When a storage device (USB/SD) set to other players where LINK is connected is to be used: Press the [LINK] button. — To use a mobile device (iOS/Android) or USB device connected by wire to the USB (A terminal): Press the [USB] button. — To use an SD memory card: Press the [SD] button. ! The following describes examples for when the [rekordbox] button is pressed and when the [USB] button is pressed. 2 Press the [rekordbox] button. LINK INFO rekordbox BROWSE TAG LIST INFO UTILITY BACK TAG TRACK / REMOVE MENU LINK USB SD DISC QUANTIZE TIME MODE AUTO CUE ! To use a mobile device (iOS/Android) connected by wire: Press the [USB] button. 3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection. rekordbox (iOS/Android) rekordbox (Mac/Windows) The devices that have been recognized are indicated on the DJ player’s screen. Ex.: When connecting a computer (Mac/Windows) The connection completed screen appears. rekordbox (iOS/Android) rekordbox (Mac/Windows) This completes checking the connections. 10 En Connecting DJ player (Group A) and DJ mixer (Group B) 2 Connecting DJ player (Group A) and DJ mixer (Group B) 2-1 Connecting rekordbox by wireless LAN Equipment used ! ! ! ! ! ! CDJ-2000NXS/CDJ-900NXS/XDJ-1000 (1 to 4) Wireless router with internal switching hub Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed DJM-900NXS or DJM-900SRT Audio cable LAN cables (one for each DJ player + one more) Connections diagram (when connecting two DJ players) POWER MIC USB MIC1 MASTER CD/ LINE PHONO DIGITAL USB 1/ 2 CD/ LINE LINE DIGITAL USB 3 /4 CD/ LINE LINE DIGITAL USB 5/ 6 CD/ LINE PHONO DIGITAL USB 7/ 8 TRIM TRIM TRIM TRIM MIDI START / STOP ON/ OFF LEVEL LFO FORM WAKE UP UTILITY BEAT EFFECTS 0 MIC 1 OVER OVER OVER OVER 10 10 10 10 7 0 LEVEL 7 9 HI 4 2 MIC 2 12 12 12 12 6 -2 EQ DUB ECHO SPACE dB 6 COLOR GATE/ COMP dB -5 -7 -10 COLOR dB BEAT -15 -24 6 X- PAD -3 ISO 6 LOW -10 -15 -26 / ms -2 EQ/ -5 - 7 -26 / -24 6 % -1 -2 -15 -26 / 6 MID -3 ISO 6 LOW -10 -24 -26 / EQ/ -5 - 7 -26 / -15 -24 -24 -26 / COLOR 6 L dB R AUTO / TAP CRUSH FILTER CUE LOW LINK HI LOW CUE HI LOW CUE HI LOW CUE HI CUE L R FLANGER PHASER FILTER ROBOT CUE TRANS 3 STEREO ROLL ECHO REV ROLL DELAY 4 HEADPHONES MONO SPLIT SLIP ROLL SPIRAL MONO 2 MELODIC REVERB CUE FADER START 1 QUANTIZE TAP BALANCE COLOR SOUND COLOR FX NOISE 4 MS T GRID BPM 0 -26 / -1 -2 -3 6 LOW -10 -15 dB ISO -5 - 7 -26 / 6 LOW -10 EQ/ -3 ISO -5 - 7 -26 / TALK OFF ON OVER 6 MID PARAMETER 1 0 -26 / -1 -2 EQ/ -3 LOW 6 MID 3 B 2 1 0 -26 / -1 MID 2 A AUTO TAP 4 2 1 0 -26 / 7 9 HI 4 2 1 0 -1 CH SELECT 1 MIC 10 7 9 HI 4 2 1 0 HI 7 9 HI 4 OVER STEREO 10 10 10 9 9 9 8 8 8 7 7 7 6 6 6 5 5 5 4 MIXING 4 3 2 1 0 MASTER Audio cable EQ CURVE 1 0 CF.A CF.B 1 0 3 2 1 MIC 2 TIME 4 3 2 MIDI LFO SND/ RTN 4 3 BOOTH MONITOR ISOLATOR EQ 0 MASTER CUE LEVEL / DEPTH LEVEL A THRU B A THRU B A THRU B A THRU B MIN 0 CROSS FADER CROSS FADER ASSIGN LAN cable (wired) CH FADER MAX ON / OFF PHONES A CDJ-2000NXS Wireless B DJM-900NXS CDJ-2000NXS Connection procedure Creating the [PLAYER No.] setting 1 Remove the LAN cable from the equipment and unplug the mobile device (iOS/Android) and storage device (USB/SD) from the DJ player. ! When mobile device (iOS/Android) or storage device (USB/SD) are set, and when LINK connection is established, [PLAYER No.] settings cannot be changed. 2 Turn on the power supply of the DJ player and DJ mixer. 3 Open the [UTILITY] screen of the DJ player, and assign the desired number (1 to 4) in [PLAYER No.]. ! For the display method of [UTILITY] screen, see the operating instructions of each DJ player. [PLAYER No.] setting screen (ex.: when set to [PLAYER 2]) ! Set the second DJ player on in the same way. ![PLAYER No.] is set to [AUTO] upon shipment from the factory. ! Set so that no two players have the same player number. If they do, [PLAYER No.] flashes continuously. En 11 Connecting the cables (LAN cable and audio cables) 1 Connect the wireless router and DJ mixer with LAN cable. 2 Connect the LAN cable and audio cables. Connect in such a way that the DJ player’s player number and the channel number of the terminals to which the DJ mixer’s audio cables are connected are the same number. Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the wireless router is connected to the DJ mixer CH 3 LINE CH 4 PHONO CD/ LINE POWER CONTROL OFF ON RETURN R L (MONO) POWER CH 3 LINE LINE CD/ LINE R L R SEND L (MONO) L AC IN 1 GND L SIGN SIGNAL GND R L L CH 1 PHONO CD/ LINE L SIGNAL GND MASTER1 R CD/ LINE L CH 2 CD/ LINE L GND R CDJ-2000NXS CH 2 CD/ LINE L LINE L 2 HOT 3 COLD R R MASTER2 REC OUT L L TRS MASTER2 REC OUT L L R R R BOOTH LINK L R TRS L MIC2 POWER MIDI OUT CONTROL R R BOOTH CH2 MASTER OUT RR CH4 DIGITAL CH1 R L IN CH3 DJM-900NXS CDJ-2000NXS Checking the connections Checking the DJ player’s link established by LAN connection Check that the player number indicated on the DJ player’s screen is lit in white. Connecting to LINK Cannot connect to LINK ! In case the player No. lights up gray, LINK connection is not established. When there is a DJ player that is lighted up in gray, redo the connection procedure once again. ! Similarly, check the other DJ players. Checking that the LAN cable and audio cables are synchronized Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly. Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator. If it does not match, the connection is considered to be incorrect. Redo the connection procedure once again. TRIM TRIM OVER OVER 10 10 7 7 9 HI 4 2 1 0 -1 1 0 -26 / 6 -1 MID -2 EQ/ ISO -5 - 7 -26 / CDJ-2000NXS ! Similarly, check the other DJ players. 12 En -26 / 6 MID -2 -3 -10 9 HI 4 2 6 LOW ISO -5 - 7 -26 / -10 -15 -15 -24 -24 DJM-900NXS EQ/ -3 6 LOW Checking the device(s) connected by wireless connection 1 Connect the computer or mobile device (iOS/Android) to wireless router or access points with wireless LAN. 2 Press the [rekordbox] button. LINK INFO rekordbox BROWSE TAG LIST INFO UTILITY BACK TAG TRACK / REMOVE MENU LINK Connecting DJ player (Group A) and DJ mixer (Group B) USB SD DISC QUANTIZE TIME MODE AUTO CUE 3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection. The devices that have been recognized are indicated on the DJ player’s screen. rekordbox (iOS/Android) rekordbox (Mac/Windows) 4 Press the DJ player’s rotary selector to authorize the connection. The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen. Ex.: When connecting a mobile device (iOS/Android) and a computer (Mac/Windows) The connection completed screen appears. rekordbox (iOS/Android) rekordbox (Mac/Windows) This completes checking the connections. En 13 2-2 Connecting rekordbox via cable/Setting the mobile device (iOS/Android) or storage device (USB/SD) Equipment used ! ! ! ! ! ! ! ! CDJ-2000NXS/CDJ-900NXS/XDJ-1000 (1 to 4) Switching hub USB cable for connecting mobile device (Use the included iPod cable to connect the iPod to the CDJ-2000NXS.) Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed Storage device (USB/SD) on which the music files analyzed by rekordbox are stored. DJM-900NXS or DJM-900SRT Audio cable LAN cables (one for each DJ player + two more) Connections diagram (when connecting two DJ players) POWER MIC USB MIC1 MASTER CD/ LINE PHONO DIGITAL USB 1/ 2 CD/ LINE LINE DIGITAL USB 3 /4 CD/ LINE LINE DIGITAL USB 5/ 6 CD/ LINE PHONO DIGITAL USB 7/ 8 TRIM TRIM TRIM TRIM MIDI START / STOP ON/ OFF LEVEL LFO FORM WAKE UP UTILITY BEAT EFFECTS 0 MIC 1 OVER OVER OVER OVER 10 10 10 10 7 0 LEVEL 7 9 HI 4 2 MIC 2 12 12 12 12 6 -2 EQ DUB ECHO SPACE dB 6 COLOR GATE/ COMP dB -5 -7 -10 COLOR dB BEAT -15 -24 6 X- PAD -3 ISO 6 LOW -10 -15 -26 / ms -2 EQ/ -5 - 7 -26 / -24 6 % -1 -2 -15 -26 / 6 MID -3 ISO 6 LOW -10 -24 -26 / EQ/ -5 - 7 -26 / -15 -24 -24 -26 / COLOR 6 L dB R AUTO / TAP CRUSH FILTER CUE LOW LINK HI LOW CUE HI LOW CUE HI LOW CUE HI CUE L R FLANGER PHASER FILTER ROBOT CUE TRANS SLIP ROLL SPIRAL MONO 2 MELODIC REVERB CUE STEREO 3 ROLL ECHO REV ROLL DELAY FADER START 1 4 HEADPHONES MONO SPLIT QUANTIZE TAP BALANCE COLOR SOUND COLOR FX NOISE 4 MS T GRID BPM 0 -26 / -1 -2 -3 6 LOW -10 -15 dB ISO -5 - 7 -26 / 6 LOW -10 EQ/ -3 ISO -5 - 7 -26 / TALK OFF ON OVER 6 MID PARAMETER 1 0 -26 / -1 -2 EQ/ -3 LOW 6 MID 3 B 2 1 0 -26 / -1 MID 2 A AUTO TAP 4 2 1 0 -26 / 7 9 HI 4 2 1 0 -1 CH SELECT 1 MIC 10 7 9 HI 4 2 1 0 HI 7 9 HI 4 OVER STEREO 10 10 10 9 9 9 8 8 8 7 7 7 6 6 6 5 5 5 4 MIXING 4 3 2 1 0 MASTER Audio cable EQ CURVE 1 0 CF.A CF.B 1 0 3 2 1 MIC 2 TIME 4 3 2 MIDI LFO SND/ RTN 4 3 BOOTH MONITOR ISOLATOR EQ 0 MASTER CUE LEVEL / DEPTH LEVEL A THRU B A THRU B A THRU B A THRU B MIN 0 CROSS FADER CROSS FADER ASSIGN LAN cable (wired) CH FADER MAX ON / OFF PHONES A CDJ-2000NXS USB connections B DJM-900NXS CDJ-2000NXS Connection procedure Creating the [PLAYER No.] setting 1 Remove the LAN cable from the equipment and unplug the mobile device (iOS/Android) and storage device (USB/SD) from the DJ player. ! When mobile device (iOS/Android) or storage device (USB/SD) are set, and when LINK connection is established, [PLAYER No.] settings cannot be changed. 2 Turn on the power supply of the DJ player and DJ mixer. 3 Open the [UTILITY] screen of the DJ player, and assign the desired number (1 to 4) in [PLAYER No.]. ! For the display method of [UTILITY] screen, see the operating instructions of each DJ player. [PLAYER No.] setting screen (ex.: when set to [PLAYER 2]) ! Set the second DJ player on in the same way. ![PLAYER No.] is set to [AUTO] upon shipment from the factory. ! Set so that no two players have the same player number. If they do, [PLAYER No.] flashes continuously. 14 En Connecting the cables (LAN cable and audio cables) 1 Connect the switching hub and DJ mixer with LAN cable. 2 Connect the LAN cable and audio cables. Connect in such a way that the DJ player’s player number and the channel number of the terminals to which the DJ mixer’s audio cables are connected are the same number. Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the switching hub is connected to the DJ mixer CONTROL OFF ON RETURN R L (MONO) POWER CH 3 LINE LINE CD/ LINE R L R SEND L (MONO) L AC IN 1 GND L SIGN SIGNAL GND R L L CH 1 PHONO CD/ LINE L SIGNAL GND MASTER1 R CD/ LINE L CH 2 CD/ LINE L GND R CDJ-2000NXS CH 2 CD/ LINE L LINE L 2 HOT 3 COLD R R MASTER2 REC OUT L L TRS R R BOOTH LINK L R TRS L MIC2 POWER MIDI OUT CONTROL R R BOOTH MASTER2 REC OUT L L R Connecting DJ player (Group A) and DJ mixer (Group B) CH 3 LINE CH 4 PHONO CD/ LINE POWER CH2 MASTER OUT RR CH4 DIGITAL CH1 R L IN CH3 DJM-900NXS CDJ-2000NXS Checking the connections Checking the DJ player’s link established by LAN connection Check that the player number indicated on the DJ player’s screen is lit in white. Connecting to LINK Cannot connect to LINK ! In case the player No. lights up gray, LINK connection is not established. When there is a DJ player that is lighted up in gray, redo the connection procedure once again. ! Similarly, check the other DJ players. Checking that the LAN cable and audio cables are synchronized Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly. Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator. If it does not match, the connection is considered to be incorrect. Redo the connection procedure once again. TRIM TRIM OVER OVER 10 10 7 7 9 HI 4 2 1 0 -1 1 0 -26 / 6 -1 MID -2 EQ/ ISO -5 - 7 -26 / CDJ-2000NXS -26 / 6 MID -2 -3 -10 9 HI 4 2 6 LOW EQ/ -3 ISO -5 - 7 -26 / -10 -15 -15 -24 -24 6 LOW DJM-900NXS ! Similarly, check the other DJ players. En 15 Checking the connected device(s) 1 Press one of the medium select buttons to check the connection with the respective device. — To use a computer (Mac/Windows) connected by wired LAN: Press the [rekordbox] button. — When a storage device (USB/SD) set to other players where LINK is connected is to be used: Press the [LINK] button. — To use a mobile device (iOS/Android) or USB device connected by wire to the USB (A terminal): Press the [USB] button. — To use an SD memory card: Press the [SD] button. ! The following describes examples for when the [rekordbox] button is pressed and when the [USB] button is pressed. 2 Press the [rekordbox] button. LINK INFO rekordbox BROWSE TAG LIST INFO UTILITY BACK TAG TRACK / REMOVE MENU LINK USB SD DISC QUANTIZE TIME MODE AUTO CUE ! To use a mobile device (iOS/Android) connected by wire: Press the [USB] button. 3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection. rekordbox (iOS/Android) rekordbox (Mac/Windows) The devices that have been recognized are indicated on the DJ player’s screen. Ex.: When connecting a computer (Mac/Windows) The connection completed screen appears. rekordbox (iOS/Android) rekordbox (Mac/Windows) This completes checking the connections. 16 En Connecting DJ player (Group A) and other DJ mixers 3 3-1 Connecting rekordbox by wireless LAN Connecting DJ player (Group A) and other DJ mixers Equipment used ! ! ! ! ! ! CDJ-2000NXS/CDJ-900NXS/XDJ-1000 (1 to 4) Wireless router with internal switching hub Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed Other DJ mixers (DJ mixers other than DJM-2000NXS/DJM-2000/DJM-900NXS/DJM-900SRT) Audio cable LAN cables (one for each DJ player) Connections diagram (when connecting two DJ players) POWER MIC USB MIDI MASTER MIC1 CD/LINE PHONO USB 1/2 CD/LINE LINE USB 3/4 CD/LINE LINE USB 5/6 CD/LINE PHONO LEVEL USB 7/8 START / STOP ON/ OFF UTILITY WAKE UP TRIM OVER TRIM OVER TRIM OVER TRIM OVER BEAT EFFECTS 0 OVER 10 10 9 7 MIC 1 LEVEL 7 HI 4 0 -7 12 OFF 12 -5 -26 / 6 -7 LOW -10 TALK ON OVER 6 dB CRUSH FILTER LOW 2 3 HEAD PHONES MONO SPLIT STEREO HI 4 dB 6 -7 LOW LOW % ms -5 -26 / 6 -7 LOW BEAT -10 -15 -24 -26 / 6 L dB R AUTO / TAP TAP BEAT COLOR HI 4 MST BPM -2 -3 ISO -15 dB 3 B AUTO TAP 0 -1 EQ/ -10 6 2 A PARAMETER 1 6 MID -24 -26 / BEAT LOW CUE COLOR HI LOW CUE BALANCE HI CUE L CUE R CUE FILTER FLANGER PHASER TRANS REVERB ROBOT SPIRAL SLIP ROLL PITCH ECHO MONO 10 10 10 9 9 9 8 8 8 7 7 7 6 6 6 5 5 5 4 MIXING 4 3 STEREO BOOTH MONITOR ROLL ECHO REV ROLL DELAY CF.B MASTER 1 0 Audio cable 0 2 1 0 CF.A 1 TIME 3 2 1 0 SND/ RTN 4 MIC 3 2 4 3 2 CUE -5 -26 / -15 6 COLOR CUE FADER START 1 -7 -10 -24 -26 / BEAT COLOR CUTTER 6 LOW -15 -24 -26 / BEAT NOISE -5 -26 / -10 -15 -24 dB SOUND COLOR FX CH SELECT MIC 2 0 -26 / -2 -3 ISO 1 4 1 -1 EQ/ DJ mixer other than the DJM-2000NXS/ DJM-2000/ DJM-900NXS/ DJM-900SRT -5 LOW 7 2 6 MID -3 ISO HI 4 0 -26 / -2 EQ/ 9 7 1 -1 -2 -3 ISO HI 2 6 MID -1 EQ/ -3 EQ 0 -26 / 6 MID -2 12 4 1 0 -26 / -1 12 10 10 9 7 2 1 0 HI HI 4 2 MIC 2 10 9 EQ CURVE ISOLATOR EQ LAN cable (wired) MASTER LEVEL LEVEL / DEPTH A THRU B A THRU B A THRU B A THRU B CH FADER 0 MIN CROSS FADER CROSS FADER ASSIGN MAX ON / OFF Wireless PHONES A B CDJ-2000NXS CDJ-2000NXS Connection procedure Creating the [PLAYER No.] setting 1 Remove the LAN cable from the equipment and unplug the mobile device (iOS/Android) and storage device (USB/SD) from the DJ player. ! When mobile device (iOS/Android) or storage device (USB/SD) are set, and when LINK connection is established, [PLAYER No.] settings cannot be changed. 2 Turn on the power supply of the DJ player and DJ mixer. 3 Open the [UTILITY] screen of DJ player, and set [PLAYER No.] to [AUTO]. ! For the display method of [UTILITY] screen, see the operating instructions of each DJ player. [PLAYER No.] setting screen ! Set the second DJ player on in the same way. ![PLAYER No.] is set to [AUTO] upon shipment from the factory. Connecting the cables (LAN cable and audio cables) For details on connections, see the operating instructions for the respective devices. Connect the LAN cables and audio cables referring to the connections diagrams. En 17 Checking the connections Checking the DJ player’s link established by LAN connection Check that the player number indicated on the DJ player’s screen is lit in white. Connecting to LINK Cannot connect to LINK ! In case the player No. lights up gray, LINK connection is not established. When there is a DJ player that is lighted up in gray, redo the connection procedure once again. ! Similarly, check the other DJ players. Checking the device(s) connected by wireless connection 1 Connect the computer or mobile device (iOS/Android) to wireless router or access points with wireless LAN. 2 Press the [rekordbox] button. LINK INFO rekordbox BROWSE TAG LIST INFO UTILITY BACK TAG TRACK / REMOVE MENU LINK USB SD DISC QUANTIZE TIME MODE AUTO CUE 3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection. The devices that have been recognized are indicated on the DJ player’s screen. rekordbox (iOS/Android) rekordbox (Mac/Windows) 4 Press the DJ player’s rotary selector to authorize the connection. The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen. Ex.: When connecting a mobile device (iOS/Android) and a computer (Mac/Windows) The connection completed screen appears. rekordbox (iOS/Android) rekordbox (Mac/Windows) This completes checking the connections. 18 En 3-2 Connecting rekordbox via cable/Setting the mobile device (iOS/Android) or storage device (USB/SD) Equipment used CDJ-2000NXS/CDJ-900NXS/XDJ-1000 (1 to 4) Switching hub USB cable for connecting mobile device (Use the included iPod cable to connect the iPod to the CDJ-2000NXS.) Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed Storage device (USB/SD) on which the music files analyzed by rekordbox are stored. Other DJ mixers (DJ mixers other than DJM-2000NXS/DJM-2000/DJM-900NXS/DJM-900SRT) Audio cable LAN cables (one for each DJ player + one more) Connecting DJ player (Group A) and other DJ mixers ! ! ! ! ! ! ! ! Connections diagram (when connecting two DJ players) POWER MIC USB MIC1 MIDI MASTER CD/LINE PHONO USB 1/2 CD/LINE LINE USB 3/4 CD/LINE LINE USB 5/6 CD/LINE PHONO LEVEL USB 7/8 START / STOP ON/ OFF UTILITY WAKE UP TRIM OVER TRIM OVER TRIM OVER TRIM OVER BEAT EFFECTS 0 OVER 10 10 9 7 MIC 1 HI 4 0 LEVEL 12 -7 12 OFF 12 -5 -26 / 6 -7 LOW -10 TALK ON OVER -26 / 6 dB CRUSH FILTER LOW 2 3 HEAD PHONES MONO SPLIT STEREO 4 6 HI 6 -7 LOW LOW % ms -5 -26 / 6 -7 LOW BEAT -10 -15 -24 -26 / 6 L dB R AUTO / TAP TAP BEAT COLOR HI 4 MST BPM -3 ISO -15 dB 3 B -1 -2 EQ/ -10 6 2 AUTO TAP 0 6 MID -24 -26 / BEAT LOW CUE COLOR HI LOW CUE BALANCE HI CUE L CUE R CUE FILTER FLANGER TRANS PHASER REVERB ROBOT SPIRAL SLIP ROLL PITCH ECHO MONO 10 10 10 9 9 9 8 8 8 7 7 7 6 6 6 5 5 5 4 MIXING 4 3 STEREO BOOTH MONITOR ROLL ECHO REV ROLL DELAY CF.B MASTER 1 0 Audio cable 0 2 1 0 CF.A 1 TIME 3 2 1 0 SND/ RTN 4 MIC 3 2 4 3 2 CUE dB COLOR CUE FADER START 1 -26 / -15 -24 -26 / BEAT COLOR SOUND COLOR FX -7 -5 -10 -15 -24 -26 / BEAT CUTTER 6 LOW -10 -15 -24 dB NOISE -5 A PARAMETER 1 0 -26 / DJ mixer other than the DJM-2000NXS/ DJM-2000/ DJM-900NXS/ DJM-900SRT -5 LOW 1 MIC 2 1 -3 ISO CH SELECT 4 2 -1 -2 EQ/ -3 ISO 7 HI 4 6 MID -1 -2 EQ/ -3 ISO 0 -26 / 6 MID -1 -2 EQ/ HI 1 0 -26 / 6 MID -3 EQ 9 7 2 1 0 -26 / -1 -2 12 4 2 1 0 HI 10 10 9 7 HI 4 2 MIC 2 10 9 7 EQ CURVE ISOLATOR EQ LAN cable (wired) MASTER LEVEL LEVEL / DEPTH A THRU B A THRU B A THRU B A THRU B CH FADER 0 MIN CROSS FADER CROSS FADER ASSIGN MAX ON / OFF USB connections PHONES A B CDJ-2000NXS CDJ-2000NXS Connection procedure Creating the [PLAYER No.] setting 1 Remove the LAN cable from the equipment and unplug the mobile device (iOS/Android) and storage device (USB/SD) from the DJ player. ! When mobile device (iOS/Android) or storage device (USB/SD) are set, and when LINK connection is established, [PLAYER No.] settings cannot be changed. 2 Turn on the power supply of the DJ player and DJ mixer. 3 Open the [UTILITY] screen of DJ player, and set [PLAYER No.] to [AUTO]. ! For the display method of [UTILITY] screen, see the operating instructions of each DJ player. [PLAYER No.] setting screen ! Set the second DJ player on in the same way. ![PLAYER No.] is set to [AUTO] upon shipment from the factory. Connecting the cables (LAN cable and audio cables) For details on connections, see the operating instructions for the respective devices. Connect the LAN cables and audio cables referring to the connections diagrams. En 19 Checking the connections Checking the DJ player’s link established by LAN connection Check that the player number indicated on the DJ player’s screen is lit in white. Connecting to LINK Cannot connect to LINK ! In case the player No. lights up gray, LINK connection is not established. When there is a DJ player that is lighted up in gray, redo the connection procedure once again. ! Similarly, check the other DJ players. Checking the connected device(s) 1 Press one of the medium select buttons to check the connection with the respective device. — To use a computer (Mac/Windows) connected by wired LAN: Press the [rekordbox] button. — When a storage device (USB/SD) set to other players where LINK is connected is to be used: Press the [LINK] button. — To use a mobile device (iOS/Android) or USB device connected by wire to the USB (A terminal): Press the [USB] button. — To use an SD memory card: Press the [SD] button. ! The following describes examples for when the [rekordbox] button is pressed and when the [USB] button is pressed. 2 Press the [rekordbox] button. LINK INFO rekordbox BROWSE TAG LIST INFO UTILITY BACK TAG TRACK / REMOVE MENU LINK USB SD DISC QUANTIZE TIME MODE AUTO CUE ! To use a mobile device (iOS/Android) connected by wire: Press the [USB] button. 3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection. rekordbox (iOS/Android) rekordbox (Mac/Windows) The devices that have been recognized are indicated on the DJ player’s screen. Ex.: When connecting a computer (Mac/Windows) The connection completed screen appears. rekordbox (iOS/Android) rekordbox (Mac/Windows) This completes checking the connections. 20 En Connecting DJ player (Group B) and DJ mixer (Group A) 4 Connecting rekordbox via cable/Setting the storage device (USB/SD) Equipment used Connecting DJ player (Group B) and DJ mixer (Group A) ! ! ! ! ! ! CDJ-2000/CDJ-900 (1 to 4) Computer (Mac/Windows) on which rekordbox is installed Storage device (USB/SD) on which the music files analyzed by rekordbox are stored. DJM-2000NXS or DJM-2000 Audio cable LAN cables (one for each DJ player + one more) Connections diagram (when connecting two DJ players) UTILITY BROWSE TAG LIST INFO BACK TAG TRACK / REMOVE UTILITY MENU OFF ON POWER LINK UNLOCK MIC DISC EJECT CD /DIGITAL TRIM SD 1 USB 3/4 LINE 2 3 TRIM OVER OVER DELAY MULTI TAP DELAY ECHO REVERB +9 MIC LEVEL AUTO CUE - HI EQ +12 -12 RELOOP/EXIT NEEDLE SEARCH LOOP TALK OFF ON OVER RELEASE / START EQ/ -3 ISO -5 +6 IN ADJUST OUT ADJUST JOG ADJUST 4-BEAT LOOP LOOP CUTTER LIGHT HEAVY INST FX VINYL CDJ CD /DIGITAL M GATE TRANS JET ZIP HPF LPF 6 FWD 10 16 MAX MIN MAX MIN MAX 1/2 3/4 1/1 2/1 -24 EQ/ ISO -7 LEVEL/DEPTH -5 TOUCH / BRAKE MAX MIN RELOOP /EXIT LOOP NEEDLE SEARCH CUE / LOOP CALL DELETE MEMORY RELEASE / START -7 IN ADJUST - 10 LOW OUT ADJUST 4-BEAT LOOP - 15 JOG ADJUST - 24 dB dB L R REC / CALL LOOP CUTTER LIGHT +6 -26/ HEAVY +6 -26/ FILTER ON/OFF VINYL CDJ DIRECTION MIN MAX MAX MIN JOG MODE BALANCE FILTER CUE MIN OUT -5 +6 -26/ IN / CUE -3 ISO -24 dB MAX VINYL SPEED ADJUST -2 EQ/ - 15 -24 AUTO /TAP TAP MIN AUTO CUE 1 -3 -7 TIME MODE HOT CUE 2 0 -1 MID - 10 LOW - 15 TIME dB FILTER +6 -26/ - 10 - 15 +6 -26/ 4/1 4 +6 -26/ -2 -2 -5 1/4 0 -1 MID SD 7 4 2 1 +6 -26/ -3 1/8 LOCK DISC EJECT DISC 10 HI 7 2 - 10 LOW -24 WIDE PARAMETER MIN +9 10 HI 7 1 0 -7 +9 10 -1 OFF ON STANDBY UNLOCK SD OVER 4 HI TAG TRACK / REMOVE POWER 0 OVER SEND/ RETURN PHASER -5 +6 -26/ - 15 +6 -26/ FILTER MID -3 ISO dB JOG MODE TEMPO LOW 0 BACK MENU USB - TRIM INFO USB STOP CD /DIGITAL PHONO USB 7/8 USB 5/6 LINE OVER -1 -2 EQ/ FILTER DIRECTION SLIP ROLL EFFECT FREQUENCY 4 2 MID - 10 LOW NOISE CRUSH -7 10 7 +6 -26/ -2 +12 -12 DELETE MEMORY CUE / LOOP CALL 0 -1 MID -26/ REC / CALL B TRIM REV ROLL ROLL A 1 1 +6 -26/ LOW OUT +9 HI 4 2 HI TOUCH / BRAKE 10 7 0 VINYL SPEED ADJUST IN / CUE MIC EFFECT SELECT DISC SD TIME MODE CH SELECT 4 TAG LIST LINK MASTER CD /DIGITAL PHONO USB 1/2 LOCK USB HOT CUE BROWSE OFF ON POWER STANDBY USB STOP MAX TEMPO 6 FWD R L REV 10 16 WIDE REV MASTER TEMPO CUE MIN TRACK SEARCH LIVE SAMPLER CUE CUE CUE MASTER TEMPO CUE MAX SYNC MASTER LINK TRACK SEARCH WAKE UP 10 10 HEADPHONES MONO SPLIT MONO STEREO UTILITY CUE 8 7 8 7 MIX SEARCH 6 6 5 5 4 4 MIXING BOOTH MONITOR 9 9 STEREO SEARCH 3 MIDI 3 REMIX 2 1 2 1 ON /OFF 0 START/STOP Audio cable 0 0 SNAPSHOT CUE 0 CUE PLAY / PAUSE MASTER LEVEL 0 CURVE SETTING ON/OFF CH EQ TEMPO RESET REV CUE TEMPO RESET CUE - FWD 0 A THRU B A THRU B A CROSS FADER ASSIGN THRU B A THRU B CROSS FADER ASSIGN ISOLATOR EQ CH FADER PLAY / PAUSE REV FWD PHONES CROSS FADER A TEMPO MULTI PLAYER CDJ-2000 B CDJ-2000 TEMPO PROFESSIONAL MIXER DJM-2000NXS MULTI PLAYER DJM-2000 nexus LAN cable (wired) CDJ-2000 CDJ-2000 Connection procedure Creating the [PLAYER No.] setting 1 Remove the LAN cable from the equipment and unplug the storage device (USB/SD) from the DJ player. ! When storage device (USB/SD) is set, and when LINK connection is established, [PLAYER No.] settings cannot be changed. 2 Turn on the power supply of the DJ player and DJ mixer. 3 Open the [UTILITY] screen of DJ player, and set [PLAYER No.] to [AUTO]. ! For the display method of [UTILITY] screen, see the operating instructions of each DJ player. [PLAYER No.] setting screen ! Set the second DJ player on in the same way. ![PLAYER No.] is set to [AUTO] upon shipment from the factory. En 21 Connecting the cables (LAN cable and audio cables) Connect the LAN cable and audio cables. Connect in such a way that the channel number of the DJ mixer’s LAN cable insertion port and the channel number of the terminals to which the audio cables are connected are the same number. Connect computer to [COMPUTER1] or [COMPUTER2] of DJ mixer. Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the computer (Mac/Windows) is connected to [COMPUTER1] CONTROL CD DIGITAL PHONO L CH4 CD R CH3 LINE SIGNAL GND L CH1R CH2 CD LINE CD L 3 CH CH 1 DIGITAL POWER AUDIO OUT R CONTROL L OFF ON DIGITAL OUT POWER BOOTH MASTER2 REC OUT L MASTER1 R USB CH3 IN CH2 CH4 CH1 O) R R LINK OUT CONTROL CD DIGITAL CD DIGITAL L R MASTER ATT. AC IN TRS LINK SEND L R R CD SIGNAL GND L COMPUTER 1 POWER AUDIO OUT CD DIGITAL R CONTROL L DIGITAL OUT R CH 3 CH 1 COMPUTER 1 MIDI OUT L(MONO) USB LINK USB LINK -6dB -3dB 0dB CH 4 R 1GND R RETURN L(MONO) PHONO CONTROL CD DIGITAL CH 2 CH 4 2HOT CH 2 COMPUTER 2 COMPUTER 2 3COLD CDJ-2000 DJM-2000NXS CDJ-2000 Checking the connections Checking the DJ player’s link established by LAN connection (for the CDJ-2000) Check that the player number indicated on the DJ player’s screen is lit in white. Connecting to LINK Cannot connect to LINK ! In case the player No. lights up gray, LINK connection is not established. When there is a DJ player that is lighted up in gray, redo the connection procedure once again. ! Similarly, check the other DJ players. Checking the DJ player’s link established by LAN connection (for the CDJ-900) Touch and hold the [MENU/UTILITY] button of DJ player for 1 second or more to open the [UTILITY] screen, and confirm that [LINK STATUS] is set to [CONNECTED]. Connecting to LINK UTILITY PLAYER No. LINK STATUS AUTO STANDBY MIDI CHANNEL Cannot connect to LINK UTILITY PLAYER No. LINK STATUS AUTO STANDBY MIDI CHANNEL 2 CONNECTED ON – 2 NOT CONNECTED ON – ! In case [NOT CONNECTED] is displayed, LINK connection is not established. In case of the DJ player where [NOT CONNECTED] is displayed, redo the connection procedure once again. ! Similarly, check the other DJ players. Checking that the LAN cable and audio cables are synchronized Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly. Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator. If it does not match, the connection is considered to be incorrect. Redo the connection procedure once again. CD /DIGITAL PHONO USB 1/2 CD /DIGITAL TRIM USB 3/4 LINE TRIM OVER +9 HI OVER +9 10 HI 7 +6 -26/ 4 2 2 1 1 0 +6 -26/ -1 MID EQ/ -3 ISO -5 +6 -26/ -7 -2 EQ/ -3 ISO -5 +6 -26/ - 10 LOW - 15 -24 -24 dB dB CDJ-900 22 En +6 -26/ FILTER ! Similarly, check the other DJ players. -7 - 10 LOW - 15 +6 -26/ 0 -1 MID -2 CDJ-2000 10 7 4 DJM-2000NXS FILTER Checking the connected device(s) 1 Press one of the medium select buttons to check the connection with the respective device. — To use a computer (Mac/Windows) connected by wired LAN: Press the [LINK] button. — When a storage device (USB/SD) set to other players where LINK is connected is to be used: Press the [LINK] button. — To use a USB device connected by wire to the USB (A terminal): Press the [USB] button. — To use an SD memory card: Press the [SD] button. ! The following describes an example for when using a computer (Mac/Windows) connected by wired LAN (for when the [LINK] button is pressed). 2 Press the [LINK] button. UTILITY BROWSE TAG LIST INFO BACK TAG TRACK / REMOVE MENU LINK USB Connecting DJ player (Group B) and DJ mixer (Group A) SD DISC TIME MODE AUTO CUE 3 Click the [LINK] button to connect. rekordbox (Mac/Windows) The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen. Ex.: When connecting a computer (Mac/Windows) rekordbox (Mac/Windows) This completes checking the connections. En 23 Connecting DJ player (Group B) and DJ mixer (Group B) 5 Connecting rekordbox via cable/Setting the storage device (USB/SD) Equipment used ! ! ! ! ! ! ! CDJ-2000/CDJ-900 (1 to 4) Switching hub Computer (Mac/Windows) on which rekordbox is installed Storage device (USB/SD) on which the music files analyzed by rekordbox are stored. DJM-900NXS or DJM-900SRT Audio cable LAN cables (one for each DJ player + two more) Connections diagram (when connecting two DJ players) UTILITY BROWSE TAG LIST INFO BACK POWER TAG TRACK / REMOVE MENU MIC OFF ON POWER LINK UNLOCK USB MIC1 STANDBY USB STOP CD/ LINE LINE DIGITAL USB 3 /4 CD/ LINE LINE DIGITAL USB 5/ 6 CD/ LINE PHONO DIGITAL USB 7/ 8 TRIM TRIM TRIM TRIM MIC 1 DISC LEVEL CUE / LOOP CALL 12 IN ADJUST OUT ADJUST 4-BEAT LOOP JOG ADJUST LIGHT HEAVY LOW CDJ JOG MODE DUB ECHO SPACE 6 FWD 10 16 NOISE CRUSH FILTER dB 6 dB 6 dB 6 ms TOUCH / BRAKE BEAT HI LOW HI LOW 6 LOW HI L dB CUE CUE CUE CUE L AUTO / TAP TRANS STEREO REC / CALL OUT ADJUST JOG ADJUST LOOP CUTTER HEAVY 10 10 10 9 9 9 8 STEREO 8 7 8 7 6 1 MASTER TEMPO MASTER 0 3 2 2 1 1 1 0 0 0 SEARCH TIME 4 3 2 WIDE REV TRACK SEARCH CF.A CF.B 5 4 3 16 SLIP ROLL ROLL MIC 2 6 5 4 10 7 6 5 EQ CURVE ISOLATOR EQ Audio cable MASTER LEVEL / DEPTH 0 A THRU B A THRU B A THRU B A THRU B 0 CH FADER CUE TEMPO RESET MIN 0 CROSS FADER CROSS FADER ASSIGN FWD A TEMPO RESET MAX ON / OFF PLAY / PAUSE PHONES REV FWD B TEMPO TEMPO CDJ-2000 CDJ-2000 JOG MODE TEMPO 6 REV ROLL MIDI LFO SND/ RTN 4 3 BOOTH MONITOR LEVEL MULTI PLAYER VINYL FWD MELODIC ECHO DELAY MIXING REV RELEASE / START CDJ SPIRAL CUE CUE DELETE MEMORY LIGHT 4 SEARCH PLAY / PAUSE CUE / LOOP CALL DIRECTION REVERB 3 HEADPHONES MONO SPLIT IN ADJUST QUANTIZE TAP FLANGER PHASER FILTER ROBOT CUE MONO 2 NEEDLE SEARCH 4-BEAT LOOP R R FADER START 1 RELOOP /EXIT BALANCE COLOR HI CUE MASTER TEMPO VINYL SPEED ADJUST OUT LOOP -24 -26 / COLOR AUTO CUE CUE LOW LINK REV TIME MODE HOT CUE IN / CUE -15 WIDE TRACK SEARCH SD % -10 -24 -26 / COLOR DISC MS T GRID BPM -5 -15 -24 -26 / COLOR B X- PAD -7 6 LOW -10 -15 -24 -26 / GATE/ COMP ISO -5 LOW -10 -15 A PARAMETER 0 -2 - 7 -26 / 6 LOCK -3 SOUND COLOR FX TEMPO STANDBY UNLOCK -1 EQ/ -3 ISO -5 OFF ON POWER 4 AUTO TAP 4 6 MID -2 - 7 -26 / 6 LOW -10 -24 VINYL ISO -5 3 1 -26 / -1 EQ/ -3 2 2 0 6 MID -2 - 7 -26 / 6 -15 LOOP CUTTER TAG TRACK / REMOVE DISC EJECT MIC 7 9 1 -26 / -1 EQ/ HI 2 0 6 MID -3 ISO -10 dB REC / CALL BACK MENU CH SELECT 1 10 4 1 -26 / -2 - 7 -26 / 12 TALK OFF ON OVER DIRECTION INFO USB SD OVER 7 9 2 0 -1 EQ/ HI 4 1 6 MID -3 -5 12 RELEASE / START 7 9 HI 4 2 -26 / -2 EQ LOW DELETE MEMORY 7 9 HI 4 0 12 NEEDLE SEARCH OVER 10 -1 HI RELOOP/EXIT OVER 10 1 0 TOUCH / BRAKE LOOP OVER 10 2 MIC 2 VINYL SPEED ADJUST OUT OVER 10 7 0 AUTO CUE TAG LIST LINK USB STOP WAKE UP BEAT EFFECTS SD IN / CUE BROWSE LFO FORM UTILITY SD TIME MODE MIDI START / STOP ON/ OFF LEVEL 0 DISC EJECT HOT CUE UTILITY MASTER CD/ LINE PHONO DIGITAL USB 1/ 2 LOCK USB MULTI PLAYER DJM-900NXS LAN cable (wired) CDJ-2000 CDJ-2000 Connection procedure Creating the [PLAYER No.] setting 1 Remove the LAN cable from the equipment and unplug the storage device (USB/SD) from the DJ player. ! When storage device (USB/SD) is set, and when LINK connection is established, [PLAYER No.] settings cannot be changed. 2 Turn on the power supply of the DJ player and DJ mixer. 3 Open the [UTILITY] screen of the DJ player, and assign the desired number (1 to 4) in [PLAYER No.]. ! For the display method of [UTILITY] screen, see the operating instructions of each DJ player. [PLAYER No.] setting screen (ex.: when set to [PLAYER 2]) ! Set the second DJ player on in the same way. ![PLAYER No.] is set to [AUTO] upon shipment from the factory. ! Set so that no two players have the same player number. If they do, [PLAYER No.] flashes continuously. 24 En Connecting the cables (LAN cable and audio cables) 1 Connect the switching hub and DJ mixer with LAN cable. 2 Connect the LAN cable and audio cables. Connect in such a way that the DJ player’s player number and the channel number of the terminals to which the DJ mixer’s audio cables are connected are the same number. Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the computer (Mac/Windows) is connected to the DJ mixer CH 3 LINE POWER AUDIO OUT R CONTROL L OFF ON DIGITAL OUT R POWER L RETURN L (MONO) CH 2 CD/ LINE L CH 3 LINE LINE CH 2 CD/ LINE LINE L CD/ LINE L CD/ LINE SIGNAL GND CH 1 PHONO CD/ LINE L GND L SIGN SIGNAL GND MIC2 MIDI OUT POWER AUDIO OUT R R R L LINK R USB SEND L (MONO) L AC IN CDJ-2000 R MASTER1 R 1 GND L R R BOOTH MASTER2 REC OUT L L TRS R MASTER2 REC OUT L L L R R 2 HOT 3 COLD R R L BOOTH LINK TRS L CONTROL L DIGITAL OUT R CH2 MASTER OUT RR CH4 DIGITAL CH1 R L LINK USB IN CH3 DJM-900NXS CDJ-2000 Checking the connections Checking the DJ player’s link established by LAN connection (for the CDJ-2000) Check that the player number indicated on the DJ player’s screen is lit in white. Connecting to LINK Cannot connect to LINK ! In case the player No. lights up gray, LINK connection is not established. When there is a DJ player that is lighted up in gray, redo the connection procedure once again. ! Similarly, check the other DJ players. Checking the DJ player’s link established by LAN connection (for the CDJ-900) Connecting DJ player (Group B) and DJ mixer (Group B) CH 4 PHONO CD/ LINE Touch and hold the [MENU/UTILITY] button of DJ player for 1 second or more to open the [UTILITY] screen, and confirm that [LINK STATUS] is set to [CONNECTED]. Connecting to LINK UTILITY PLAYER No. LINK STATUS AUTO STANDBY MIDI CHANNEL Cannot connect to LINK UTILITY PLAYER No. LINK STATUS AUTO STANDBY MIDI CHANNEL 2 CONNECTED ON – 2 NOT CONNECTED ON – ! In case [NOT CONNECTED] is displayed, LINK connection is not established. In case of the DJ player where [NOT CONNECTED] is displayed, redo the connection procedure once again. ! Similarly, check the other DJ players. Checking that the LAN cable and audio cables are synchronized Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly. Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator. If it does not match, the connection is considered to be incorrect. Redo the connection procedure once again. TRIM TRIM OVER OVER 10 10 7 7 9 HI 4 CDJ-2000 2 1 0 -1 1 0 -26 / 6 -1 MID -2 EQ/ ISO -5 - 7 -26 / CDJ-900 -26 / 6 MID -2 -3 -10 9 HI 4 2 6 LOW EQ/ -3 ISO -5 - 7 -26 / -10 -15 -15 -24 -24 6 LOW DJM-900NXS ! Similarly, check the other DJ players. En 25 Checking the connected device(s) 1 Press one of the medium select buttons to check the connection with the respective device. — To use a computer (Mac/Windows) connected by wired LAN: Press the [LINK] button. — When a storage device (USB/SD) set to other players where LINK is connected is to be used: Press the [LINK] button. — To use a USB device connected by wire to the USB (A terminal): Press the [USB] button. — To use an SD memory card: Press the [SD] button. ! The following describes an example for when using a computer (Mac/Windows) connected by wired LAN (for when the [LINK] button is pressed). 2 Press the [LINK] button. UTILITY BROWSE TAG LIST INFO BACK TAG TRACK / REMOVE MENU LINK USB SD DISC TIME MODE AUTO CUE 3 Click the [LINK] button to connect. rekordbox (Mac/Windows) The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen. Ex.: When connecting a computer (Mac/Windows) rekordbox (Mac/Windows) This completes checking the connections. 26 En Connecting DJ player (Group B) and other DJ mixers 6 Connecting rekordbox via cable/Setting the storage device (USB/SD) Equipment used CDJ-2000/CDJ-900 (1 to 4) Switching hub Computer (Mac/Windows) on which rekordbox is installed Storage device (USB/SD) on which the music files analyzed by rekordbox are stored. Other DJ mixers (DJ mixers other than DJM-2000NXS/DJM-2000/DJM-900NXS/DJM-900SRT) Audio cable LAN cables (one for each DJ player + one more) Connecting DJ player (Group B) and other DJ mixers ! ! ! ! ! ! ! Connections diagram (when connecting two DJ players) UTILITY BROWSE TAG LIST INFO BACK TAG TRACK / REMOVE UTILITY MENU STANDBY UNLOCK BROWSE POWER OFF ON POWER LINK USB STOP MIC LOCK USB MIC1 USB PHONO USB 1/2 CD/LINE LINE USB 3/4 CD/LINE LINE USB 5/6 CD/LINE PHONO LEVEL USB 7/8 TRIM OVER TRIM OVER TRIM OVER TRIM OVER 10 9 7 LEVEL OUT RELOOP/EXIT LOOP NEEDLE SEARCH CUE / LOOP CALL -2 HI DELETE MEMORY 12 RELEASE / START 12 IN ADJUST OUT ADJUST 4-BEAT LOOP JOG ADJUST -7 12 OFF REC / CALL 12 -5 -26 / 6 -7 LOW -10 TALK ON OVER LIGHT HEAVY VINYL CDJ JOG MODE dB 6 FWD 10 16 WIDE CRUSH FILTER dB MASTER TEMPO 2 3 4 MONO SPLIT STEREO LOW 0 CUE LOW HI LOW L dB R HI L STEREO BOOTH MONITOR 8 7 6 DELETE MEMORY RELEASE / START JOG ADJUST LOOP CUTTER TAP LIGHT HEAVY VINYL CDJ DIRECTION CUE JOG MODE TEMPO 6 FWD 10 16 WIDE REV FILTER FLANGER TRANS PHASER REVERB MASTER TEMPO ROBOT SPIRAL SLIP ROLL ROLL ECHO TRACK SEARCH REV ROLL DELAY SND/ RTN 4 MIC 3 2 CF.A CF.B 1 MASTER SEARCH 6 5 5 4 TIME 4 3 3 2 0 2 1 1 1 0 0 0 EQ CURVE Audio cable ISOLATOR EQ 0 MASTER LEVEL TEMPO RESET CUE / LOOP CALL R CUE 9 7 3 OUT ADJUST 4-BEAT LOOP REC / CALL AUTO / TAP 10 8 4 NEEDLE SEARCH BALANCE CUE 9 7 RELOOP /EXIT -15 6 COLOR 10 8 2 LEVEL / DEPTH A FWD IN ADJUST BEAT -10 -24 -26 / PITCH ECHO 5 REV TOUCH / BRAKE OUT LOOP -7 MONO 9 VINYL SPEED ADJUST IN / CUE BEAT CUE 6 CUE dB COLOR HI 6 LOW -15 6 AUTO CUE ms -5 -26 / -24 -26 / BEAT CUE MIXING PLAY / PAUSE dB HOT CUE % -3 ISO -10 -15 6 10 HEAD PHONES SEARCH -7 -10 CUE FADER START 1 6 LOW COLOR HI -5 -26 / 4 MST BPM -2 EQ/ -3 ISO -24 -26 / BEAT LOW REV TRACK SEARCH -7 -15 6 COLOR CUTTER SOUND COLOR FX 6 LOW -24 -26 / BEAT NOISE TEMPO -5 -26 / -10 -15 -24 LOOP CUTTER DIRECTION -2 EQ/ -3 ISO 3 B -1 DJ mixer other than the DJM-2000NXS/ DJM-2000/ DJM-900NXS/ DJM-900SRT -5 LOW -2 EQ/ -3 ISO DISC 2 AUTO TAP 0 6 MID A PARAMETER 1 0 -26 / -1 TIME MODE CH SELECT MIC 2 1 6 MID 1 4 2 0 -26 / LOCK DISC EJECT SD 7 HI 4 1 -1 -2 EQ/ -3 EQ 9 7 2 6 MID -1 OFF ON STANDBY UNLOCK SD 10 10 HI 4 0 -26 / 6 MID 9 7 1 0 -26 / -1 IN / CUE 10 2 1 0 HI 4 2 MIC 2 9 7 HI 4 0 VINYL SPEED ADJUST TOUCH / BRAKE TAG TRACK / REMOVE USB OVER 10 MIC 1 AUTO CUE BACK MENU USB STOP UTILITY BEAT EFFECTS 0 DISC SD TIME MODE INFO POWER START / STOP ON/ OFF WAKE UP SD HOT CUE TAG LIST LINK MIDI MASTER CD/LINE DISC EJECT THRU B A THRU B A THRU B A THRU B CH FADER 0 MIN CROSS FADER CROSS FADER ASSIGN MAX CUE PLAY / PAUSE TEMPO RESET REV FWD ON / OFF PHONES TEMPO MULTI PLAYER A TEMPO B CDJ-2000 CDJ-2000 MULTI PLAYER LAN cable (wired) CDJ-2000 CDJ-2000 Connection procedure Creating the [PLAYER No.] setting 1 Remove the LAN cable from the equipment and unplug the storage device (USB/SD) from the DJ player. ! When storage device (USB/SD) is set, and when LINK connection is established, [PLAYER No.] settings cannot be changed. 2 Turn on the power supply of the DJ player and DJ mixer. 3 Open the [UTILITY] screen of the DJ player, and assign the desired number (1 to 4) in [PLAYER No.]. ! For the display method of [UTILITY] screen, see the operating instructions of each DJ player. [PLAYER No.] setting screen (ex.: when set to [PLAYER 2]) ! Set the second DJ player on in the same way. ![PLAYER No.] is set to [AUTO] upon shipment from the factory. ! Set so that no two players have the same player number. If they do, [PLAYER No.] flashes continuously. Connecting the cables (LAN cable and audio cables) For details on connections, see the operating instructions for the respective devices. Connect the LAN cables and audio cables referring to the connections diagrams. En 27 Checking the connections Checking the DJ player’s link established by LAN connection (for the CDJ-2000) Check that the player number indicated on the DJ player’s screen is lit in white. Connecting to LINK Cannot connect to LINK ! In case the player No. lights up gray, LINK connection is not established. When there is a DJ player that is lighted up in gray, redo the connection procedure once again. ! Similarly, check the other DJ players. Checking the DJ player’s link established by LAN connection (for the CDJ-900) Touch and hold the [MENU/UTILITY] button of DJ player for 1 second or more to open the [UTILITY] screen, and confirm that [LINK STATUS] is set to [CONNECTED]. Connecting to LINK Cannot connect to LINK UTILITY PLAYER No. LINK STATUS AUTO STANDBY MIDI CHANNEL UTILITY PLAYER No. LINK STATUS AUTO STANDBY MIDI CHANNEL 2 CONNECTED ON – 2 NOT CONNECTED ON – ! In case [NOT CONNECTED] is displayed, LINK connection is not established. In case of the DJ player where [NOT CONNECTED] is displayed, redo the connection procedure once again. ! Similarly, check the other DJ players. Checking the connected device(s) 1 Press one of the medium select buttons to check the connection with the respective device. — To use a computer (Mac/Windows) connected by wired LAN: Press the [LINK] button. — When a storage device (USB/SD) set to other players where LINK is connected is to be used: Press the [LINK] button. — To use a USB device connected by wire to the USB (A terminal): Press the [USB] button. — To use an SD memory card: Press the [SD] button. ! The following describes an example for when using a computer (Mac/Windows) connected by wired LAN (for when the [LINK] button is pressed). 2 Press the [LINK] button. UTILITY BROWSE TAG LIST INFO LINK USB SD DISC TIME MODE AUTO CUE 3 Click the [LINK] button to connect. rekordbox (Mac/Windows) 28 En MENU BACK TAG TRACK / REMOVE The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen. Ex.: When connecting a computer (Mac/Windows) Connecting DJ player (Group B) and other DJ mixers rekordbox (Mac/Windows) This completes checking the connections. © 2012 PIONEER CORPORATION. All rights reserved. <DRI1124-C> En 29