300-400 P/W

Polymat 300-400 P/W + Accessories
730-300
732-300
731-300
733-300
732-400
733-400
Transport
width mm
Polymat 300-24W
3000
Polymat 300-32W
3000
Polymat 300-24P
3000
Polymat 300-32P
3000
Polymat 400-32W
4000
Polymat 400-32P
4000
730-931-002
730-931-003
730-931-004
730-931-005
730-931-006
730-931-007-001
730-931-007-002
730-931-008
730-931-009
730-931-014
730-931-016-001
730-931-016-002
730-931-017-001
730-931-017-002
730-931-020
730-931-015
730-931-019
Accessories Polymat P / W
Low seed level signalling device + lamp
Manual valve
Mechanical hectaremeter
Solo hitch for Polymat W
Hydraulic coulter pressure adjustment
Distributor cover 24/12 - 32/12
Distributor cover 24/16 - 32/16
Full-width sowing coulter instead of standard coulter
TDS coulter instead of standard coulter
Conversion kit 1000 RPM - 540 RPM
Depth limitationskids 3 metres
Depth limitationskids 4 metres
Single asymmetric hydraulic pre-emergence marker kit
Double symmetric hydraulic pre-emergence marker kit
Hydraulic drive of fan (1000 RPM)
Hopper extension 280 litres
Non-delivery Polytronic E + tramline system
Article number
Description
Wheeltrack
mm
3080
3080
--4080
--
Number
of coulters
24
32
24
32
32
32
Filling height
mm
1800
1800
1950
1950
1800
1950
Weight
kg
960
995
910
945
1070
1040
300-400 P/W
ROTERRA
per coulter
per coulter
MULTITERRA
MULTIDISC
MULTIDISC PLUS
MULTIVATOR
POLYTRONIC E on-board computer: The POLYTRONIC
includes a control system, hectare counter and a tramline
system. A number of important functions such as hopper
seed level, fan speed, voltage and correct seed flow are
monitored. Dosing fertilizer and insecticide can easily be
done by laying down tramlines. This is achieved by blocking off seed flow to certain coulters in a pre-determined
rhythm. This rhythm depends on the working width of the
machine and the working width of the spreader or spray
machine.
The POLYTRONIC E offers a choice of 18 different tramline
rhythms. The tramlines can be laid in either one or two
working passes, depending on the situation. The tramline system is fitted with a special distributor housing which has an actuator (spindle motor) which
automatically opens or closes 1 to 6 outlets. When outlets are in the closed position, seed is returned
directly back into the hopper. A special pin can be supplied to allow the seeds from closed outlets to
be sown in adjacent rows if required.
ROTARYTILLER
POLYMAT
CENTERLINER
EN
Peeters Agricultural machinery
Munnikenheiweg 47, 4879 NE Etten-Leur (NL)
Tel.: 0031 (0)76-5046666, Fax: 0031 (0)76-5046699
[email protected], www.tulipindustries.com
Changes or misprints reserved
756-104-001-001 (03-2007)
300-400 P/W
Accessoiries:
• Polytronic E + tramline system
• Low seed level signalling device + lamp
• Magnet valve
• Mechanic hectare counter
• Solo-linkage
• Hydraulic coulter pressure adjustment
• Distributor cover 24-12, 32-12, 24-16, 32-16
• Full-width sowing coulters
• TDS coulters
• Conversion kit 1000 rpm – 540 rpm
• Depth limitation skids
• Hydraulic pre-emergence marker kit (single or double)
• Hopper extension
Polymat 300-400 P/W
POLYMAT pneumatic seed drills are available in two versions.
The wheel version “W” ensures a perfectly level seed bed when
used in conjunction with a ROTERRA power harrow.
The coupling linkage allows the power harrow and seed drill
to float up and down independently whilst in work, eliminating
weight from the drill being exerted onto the roller or harrow, reducing wear and tear. The POLYMAT “W” can be linked
directly to the tractor by means of an easy to fit linkage kit for
use without a power harrow. With the version “P” the seed drill
rest’s on a packer roller Ø500 mm. The POLYMAT “P” is linked
to the ROTERRA by means of a special linkage kit.
This allows the power harrow to float up and down independently of the roller and the POLYMAT. Both versions can
also be combined with the MULTITERRA.
Standard equipment:
•Universal metering device for cereals and prilled seeds.
•Output of 1.5 to 360 kg/ha (peas and beans approx.
450 kg/ha)
•Central and individual coulter pressure adjustment.
•Filling platform accessible from the side.
•Seed coverage harrow is lifted simultaneously with the coulters, the metering wheel and the
markers when turning on headlands.
• Parts for linkage to the ROTERRA machines.
• Hydraulic markers (with shear bolts security)
• Blower driven at 1000 rpm.
Ingenious linkage: The very practical construction of the
POLYMAT allows it to be combined perfectly with a ROTERRA power
harrow or a MULTITERRA harrow. The centre of gravity of the seed
drill, in combination with a ROTERRA, is over the harrow. A unique
feature is the possibility to adjust the coulter bar within the
chassis. The centre of gravity can be kept as close as possible to
the tractor and at the same time a optimum adjustment with the
roller and/or levelling board can be created. The coupling linkage
not only allows independent floating of the POLYMAT and the
harrow but also ensures a strong linkage to the headstock. This
prevents any weight being exerted onto the gear through assembly, reducing long term wear and tear. The POLYMAT is driven by a
P.T.O. shaft coupled in a straight line from the rear of the
ROTERRA’s gearbox reducing loss of power and ensuring a quiet
operation.
Perfect dosage and distribution: Much attention has gone in to
the dosage technique and the distribution. A completely new design
of metering unit suitable for all types of seed gives a complete
range of application rates from 0.5 to 450 kg/ha. The metering unit
is infinitely adjustable and can be adapted to the use of small seeds
by means of change gears, this also allows the unit to operate at
two different speeds. The seeds are dropped into the air flow and
transported via a specially shaped elevation column, then distributed evenly by the distribution head, trough the tubes to each
coulter. A cleaning brush is standard on this machine.
Hydraulically lifted
coulter bar:
Very practical: the
hydraulically lift able
coulter bar which
can be lifted by 30º.
Ideal when turning
on headland. This
gives the coulters,
the metering wheel
and the following harrow an enormous ground clearance, even with a
full hopper. This prevents coulter blockage. The angle and the working
pressure of the following harrow can be easily adjusted to obtain the
best results for each type of soil.
3 Rows of coulters:
The coulter bar of the POLYMAT is fitted with
three rows of coulters, this gives considerably
more clearance between each coulter. Crop trash
discharge’s more easily, avoiding disruptions.
The central coulter tension is simply adjusted by
means of an easily accessible winding handle.
The coulter pressure can be adjusted individually. The metering wheel is placed between the
coulters and runs evenly on the prepared seed
bed.
TDS coulters:
For sowing after minimal soil cultivation the
TDS coulters (Twin Disc System) are available
as an option. These disc coulters grasp into
each other ensuring that they keep on turning.
They are equipped with double internal scrapers and because of their shape they do not
sink too far into the soil.
Markers: The markers switch from one side to
the other automatically with the lifting/lowering of the coulters. Disc angle is adjustable by
one bolt, a leaf spring is fitted to the marker
to prevent the disc from sinking too deep in
loose soils. The marker is fitted with telescopic
adjustment and a shear bolt safety device. Each
marker arm lifts vertically and independently if
required to clear obstacles in the field, and both
lift vertically for transport and turning.
Practical filling platform: Filling and inspecting the hopper is assured by means of
a large, easily accessible filling platform. The
platform features an anti-slip deck and heavy
duty steps. It is also designed to be easily manoeuvred alongside a trailer.
Hydraulic coulter pressure adjustment:
Hydraulic coulter pressure adjustment is available to give two different pressure settings
on the coulters. This is a distinctive advantage
when working in varying soil conditions.
Pre-emergence markers: The pre-emergence
markers make it possible to create a clearly
visible tramline during sowing. The pre-emergence marker is operated automatically with the
tramline system by the on board computer.
A single pre-emergence marker marks off
tramlines in two consecutive passes. A double
pre-emergence marker makes two tramlines in
one pass.