16 Lintrose Pl., Mount Pearl, NL, A1N-5K2 Tel: 709-368

Transcription

Bas Cleary
Director
Environmental Assessment Division
Department of Environment and Conservation
Government of Newfoundland and Labrador
File Ref No. 200.20.2352
Dear Mr. Cleary,
Please accept our application for registration of our undertaking for the above referenced file
number.
We have included in this proposal, what we hope is all the relevant information relating to our
particular undertaking, in order to assist in the completion of this process.
While we have endeavoured to provide all the information requested, should something be
missing or should you have any questions regarding our submittal or any other issue, please feel
free to contact me at your convenience.
___________________
Stephen Crane
President, C&W Offshore
c.c
Mr. Christopher Hardy, City of Mount Pearl
Mr. Paul Carter, Dept. of Environment and Conservation
16 Lintrose Pl., Mount Pearl, NL, A1N-5K2
Tel: 709-368-4300
Fax: 709-368-4301
www.cwoffshore.ca
Table of Contents
Section:
01
02
03
04
05
06
07
Description:
Registration Form
Engineers Report
Equipment Data Sheets
Stamped Facility Drawings
Propane System Stamped Drawings
Propane System Permit
Compressed Air System Permit
16 Lintrose Pl., Mount Pearl, NL, A1N-5K2
Tel: 709-368-4300
Fax: 709-368-4301
www.cwoffshore.ca
Environmental Assessment Registration
C&W Offshore Ltd. Blast and Paint Facility
REGISTRATION FORM
Pursuant to Part cE-14.2 of the Environmental Protection Act
NAME OF UNDERSTANDING: Commercial Spray Painting Booth
C&W Offshore Ltd.
16 Lintrose Pl.
Donovan’s Industrial Park
Mount Pearl, NL
PROPONENT:
(i)
Name of Corporate Body:
C&W Offshore Ltd.
(ii)
Address:
16 Lintrose Pl.
Mount Pearl, NL
A1N-5K2
(iii)
Chief Executive Officer:
Stephen Crane
President
16 Lintrose Pl.
Mount Pearl, NL
A1N-5K2
(iv)
Principal Contact:
Stephen Crane
President
16 Lintrose Pl.
Mount Pearl, NL
A1N-5K2
[email protected]
16 Lintrose Pl, Mount Pearl, NL, A1N-5K2
Tel: 709-368-4300
Fax: 709-368-4301
www.cwoffshore.ca
1.0 The Undertaking:
1.1 Background:
C&W Offshore has been operating a fabrication facility at 16 Lintrose Place since April
2011, and in Donovan’s Industrial Park since May 2005. Since that time, we have been
subcontracting painting services to various local companies, often, at cost to our own
company. Recently, C&W was awarded two large projects for the Hebron Project, much
larger and complex than what our regular painting subcontractors could take on. For this
reason, C&W Offshore set out to build the most advanced, safest, and environmentally
friendly paint facility in the province, converting an existing warehouse at its Mount Pearl
location.
1.2 Nature of the undertaking:
C&W Offshore has recently converted an existing warehouse at their facility on Lintrose
Place, and has developed that building into a painting facility. The building is a
completely explosion proof, fireproofed and fire suppressed facility with state of the art
blast and paint equipment which can take large fabricated items and perform a complete
surface protection system in a temperature and environmentally controlled indoor climate.
1.3 Purpose / Rationale / Need for the Undertaking:
C&W Offshore requires building a blast and paint facility for the following reasons:
-
Current painting subcontractors cannot physically fit the units we are currently
building into their existing blast and paint facilities.
Our existing subcontractors cannot meet the quality requirements of our client..
Safety is a number one priority to us as a company. Our current subcontractors cannot
meet the safety requirements of our ongoing projects.
For years C&W has been at the mercy of subcontractors when it comes to scheduling
for paint etc.
Also as we could not control the price of our painting for jobs and therefore lost
countless jobs because our pricing was too high.
We have also had many requests from customers for us to re-furbish some of their
existing equipment and at times have not been able to accommodate.
Tel: 709-368-4300
Fax: 709-368-4301
www.cwoffshore.ca
2.0 Description of the Undertaking:
2.1 Geographical Location:
The civic address of the proposed facility is 16 Lintrose Pl, Donovan’s Industrial Park,
Mount Pearl. (See Figures 1 – 3 for additional location information).
2.2 Physical Features:
-
The physical features of the existing building are pretty much unchanged with the
exception of a few additions in order to accommodate the specialized equipment.
-
The nearest residential home to 16 Lintrose Pl is approximately 1km, straight line
distance.
-
The adjacent buildings (looking from the road) are:
East Side – Strongco Equipment and the JMP building on Glencoe Dr.
North Side – Urban Flooring
Donovan’s Industrial, where the site is located, is zoned by the city as “Industrial Light
Use”. The definition as the city defines it is:
“Light industry, service station, restaurant, take-out food service, recreational
open space, general garage, educational and shop use in association with light
industrial use, office, general service, communications, taxi stand, police station,
indoor market (auction hall), automotive sales, and health club, furniture and
appliance showroom, existing dwellings, and civic use.”
This definition is far from accurate, as there are numerous industrial and heavy industrial
facilities operating in the park. There are three other blasting and painting facilities within a 1 km
Radius of 16 Lintrose Place, along with companies performing high pressure testing, storage of
radioactive materials, toxic and hazardous chemicals and storage of explosives.
2.3
Construction:
The blast and paint facility has been installed in a previously built warehouse. The
installation of the equipment has been completed and commissioned.
Tel: 709-368-4300
Fax: 709-368-4301
www.cwoffshore.ca
2.4
Operation:
2.4.1
Description of Operation
The operation at this facility will typically involve sandblasting, painting and packaging
for shipment. Items being processed will include structural steel frames, stairs, shipping
containers etc. The hours of operation are Monday to Friday, 8:00 am to 4:30 pm. We
have two large filter banks built into the facility which capture 99% of air borne particles
over 20 microns. It has been sized at approximately 100,000 CFM for our requirements
by Professional Engineers licensed to practice here in Newfoundland and Labrador.
Painting will be occurring in the same space as sandblasting, all be it at different times. A
complete PLC control system has been installed as well as explosion proof equipment to
ensure that both operations are as safe as possible and also can’t be done concurrently.
Please see the attached engineers report for additional information on the design
philosophy and equipment being used.
The development of this facility is subject to a discretionary use permit from the City of
Mount Pearl as well as this environmental assessment.
2.4.2
Estimated Period of Operation
This facility will be a permanent operation used to support the fabrication work of our
main facility on Lintrose Place.
2.4.3
Potential Source of Pollution
The paints we use are typically epoxy and urethane based. These are standard in the
industry and used in various paint shops in the area. We will have our paint booth fitted
with filters which can remove up to 99.84% of particulates in the air. The particulates will
then be collected in a dedicated container and collected by a certified waste management
company. All paint will be stored in accordance with government policies for similar
materials.
We have two makeup air units which help cure the paint and also provide clean air to our
painters. Combined they change the air at 100,000 cubic feet per minute and have a total
of approximately 8.2 million BTU’s of heat for ventilation during painting and heating
the air during the curing cycle. The system has been designed to ensure any fumes are
dispersed with enough velocity so as to not be noticeable to the surrounding area. For
more information on this, please see the attached Engineers Design Report.
Tel: 709-368-4300
Fax: 709-368-4301
www.cwoffshore.ca
The blast media we will be using is steel shot, and not a silica based product. All blast
media will be recycled using a blast recovery system. Steel shot is re-useable, and can be
used up to 100 times. Most of our competitors and current subcontractors currently use a
copper slag or similar product, which is not re-useable. As previously mentioned, dust
will be collected by a bank of dust collectors operating at 45,000 cubic feet per minute of
air flow.
Because of the industry we are in and our concern for the environment in general, we aim
to have ZERO discharge. Being in the offshore industry, our clients hold us and we hold
ourselves to the highest of standards. Being safe and non threatening to the environment
are two of our priorities. All waste, including old paint, dust and used filters will be
disposed of in a manner suitable to the application. All equipment has been procured in a
manner as to assure the most efficient and quiet operation. It is our goal for our neighbors
not to know we are operating. During testing, it was noted that with all the equipment
running, the overall noise produced from the facility is less than that of the ambient road
noise from the adjacent highway.
2.4.4
Occupants and Job Creation
There will be a total of approximately 4 persons working at the 16 Lintrose Place facility.
Two sandblaster / painters and two laborers. All administrative and management will be
run from our main office. These 4 positions will be new. The NOC identifiers for the
positions would be NOC 9496-C for the Painters and Blaster, and NOC 9612 for the
Labours.
3.0 Project Related Documents:
The following documents accompany this submission:
- Design report from Rowsell-Appleby-Newton Engineering Inc., the third party tasked
to ensure all the relevant regulatory requirements were met or exceeded.
- Facility drawings
- Propane system engineering drawings and permit
- Compressed air system engineering drawings and permits
There are no environmental related documents to accompany this application.
4.0 Schedule:
-
An application was filed with the City of Mount Pearl on November 10th, 2014.
November 12th a letter went in the paper seeking input from concerned parties:
Tel: 709-368-4300
Fax: 709-368-4301
www.cwoffshore.ca
-
o There were two inquiries. Both parties submitted written questions and
indicated they would be attending the briefing session.
A briefing session was held December 2nd to answer questions of any surrounding
business’.
This application was submitted on December 18th.
A response to this application is expected 45 calendar days after submittal.
The facility is fully constructed and certified. Commissioning has been completed and we
are ready to commence operations.
5.0 Funding:
There has been no funding for this project from any government body. We have invested all
funds from our own coffers. The estimated total investment for this project is in the range of
$2,000,000.00
We would like to thank the director in advance for his time and for the consideration of this
application. We have endeavored design the safest, sandblasting and painting facility
possible, and to provide all the relative information required for this submittal. Should there
be any additional information required, by all means, please contact me at your earliest
convenience,
Kindest regards,
____________________
Stephen Crane
President
C&W Offshore
June 13, 2011
Tel: 709-368-4300
Fax: 709-368-4301
www.cwoffshore.ca
Figure 1 – Map of 16 Lintrose Place
Figure 1 – Map of 16 Lintrose Place
#16
C&W Fab
Shop
Appendix 2:
C&W Paint
Shop
Tel: 709-368-4300
Fax: 709-368-4301
www.cwoffshore.ca
Figure 2 – 16 Lintrose Place Site Plan
Tel: 709-368-4300
Fax: 709-368-4301
www.cwoffshore.ca
Figure 3 – 16 Lintrose Place Street View
Tel: 709-368-4300
Fax: 709-368-4301
www.cwoffshore.ca
Abrasive Blasting and Paint Hall
Mechanical and Electrical
Design Report
1.0 Mechanical Overview
1.0.1 Fire Protection
Design Codes:
• NFPA 10 - Portable Fire Extinguishers, Latest Edition
• NFPA 13 - Installation of Sprinkler Systems, Latest Edition
• NFPA 33 - Standard for Spray Application Using Flammable or Combustible
Materials.
• NFPA 91 - Standard for Exhaust Systems for Air Conveying of Vapors, Gases,
Mists, and Noncombustible Particulate Solids
• The National Fire Code of Canada, Latest Edition
Materials and Equipment:
Extinguishing agents located in general areas will be ABC rated multipurpose dry
chemical (MPDC).
Portable fire extinguishers are multi-purpose dry chemical type “BC” for
electrical room locations
Other Design Contributions:
Fire protection system has been designed by Martin’s Fire Safety Ltd located in
Mount Pearl, NL. The system is a dry chemical system and is integrated into
ventilation systems in accordance with NFPA.
1.0.2 Ventilation
Design Codes
• The Regulations of the Province of Newfoundland.
• The National Building Code of Canada, 2010
• The National Energy Code of Canada for Buildings, 2005
• Industrial Ventilation: A Manual of Recommended Practice, 27th Edition
• CSA B149.1-10 Natural Gas and Propane Installation Code, 2010
• SMACNA, HVAC Duct Construction Standards - Metal and Flexible, 1985.
• NFPA 33 – Standard for Spray Application Using Flammable or Combustible
Materials.
• NFPA 91 – Standard for Exhaust Systems for Air Conveying of Vapors, Gases,
Mists, and Noncombustible Particulate Solids
• ANSI Z9.4-1985, "Abrasive Blasting Operations–Ventilation and Safe
Practices."
• Province of Newfoundland and Labrador Boiler, Pressure Vessel and
Compressed Gas Regulations.
• ASME B 31.3
2
Mechanical Overview
This facility is an abrasive blasting and industrial painting shop. Each operation is
controlled through an industrial control system which is located in an adjacent
control area. Each system is interlocked so that they cannot operate
simultaneously or with the doors open. Devices will be suitable for Explosion
Proof usage (Division 1, Class 1) where required.
Painting/Blasting Area
The entire paint/blasting area is rated for explosion proof operation and each door
is equipped with an explosion proof door contact. An explosion proof emergency
vehicle exhaust system is installed so material can be loaded and off loaded
safely.
Painting Operation
In accordance with NFPA 33 the mechanical ventilation system is designed to
collect overspray with paint arrestance filters and to remove vapors associated
with painting. The vapors are discharged to a safe location 1830mm above the
roof line and the concentration of vapors in the exhaust air stream are kept lower
than twenty five percent of their flammable limit. There are explosion proof
differential pressure switches which monitor filter cleanliness to ensure safe
operation and the least amount of impact on the environment as possible. Paint
area differential pressure is monitored as well to detect any possible issues with
the ventilation system.
Painting Ventilation Equipment
Six roof mounted paint exhaust fans (EF-1 to 6) discharge 46525L/s of air and
two propane fired makeup units (MUA-1/2) provide 42965L/s to provide a cross
sectional spray area velocity of 0.508m/s (Cross sectional area of building is
91m2).
Painting Sequence of Operation
1. System shall only start up if filter differential pressure, booth pressure, door
contacts and all other safeties are within safe parameters. Solenoid valve
controlling compressed air to shop shall close when system is started. If any
safeties are outside of safe parameters alarm shall display at panel to identify
unsafe condition.
2. When paint mode is enabled with safe conditions the fresh air dampers on
makeup air units (MUA-1,2) shall open. End switch required to confirm damper is
open.
3. After paint mode is enabled all paint exhaust fans (EF-1,2,3,4,5,6) shall be
enabled. Airflow: 46525l/s.
3
4. Once exhaust air flow has been confirmed all makeup air units to be enabled
(MUA-1,2). Airflow: 42965l/s. When all units are confirmed enabled, solenoid
valve may now open and the exterior light shall indicate operation in process.
5. Control panel shall have supply air temperature adjustment.
6. Once painting is complete and operator shuts down system solenoid valve shall
close and system shall continue in purge cycle for a minimum of five minutes at
full system flow. Purge shall be adjustable to higher purge times.
7. Once purge cycle has ended operator has the option of selecting cure cycle.
During cure cycle mua-2 shall operate at full flow (16525l/s) and fans EF-3,4,5,6
shall operate at full flow (18200l/s). There shall be a timer to allow the curing to
run up to twelve hours.
8. After purge and cure cycles have ended compressed air solenoid may open.
9. When paint, purge, and/or cure cycle is enabled all blasting equipment shall be
locked out so they cannot function.
10. Opening the exterior doors shall shut down the system.
Blasting Operation
In accordance with ANSI Z9.4 Abrasive Blasting the system is designed to
provide safe blasting operation. There is a blast curtain installed to reduce the area
of the building so that such velocities can be maintained. The blasting medium is
metal shot and only low-toxicity materials such as abrasives of steel oxide and
contaminants such as iron oxide scale having permissible exposure limits of
5mg/m3.
Blasting Equipment
Four cartridge filter booths (DC-2 to 5) filter 17240L/s to provide a cross sectional
velocity of 0.305m/s in accordance with ANSI Z9.4-1985. All air is recirculated
within the space through the ProTura Nanofiber medium and dust is collected
from the unit by the user. Ductwork has been added to the discharge of the booths
to provide enhanced recirculation range.
Blasting Sequence of Operation
1. System shall only start up if door contacts and all other safeties are within safe
parameters. Solenoid valve controlling compressed air to shop shall close when
system is started. If any safeties are outside of safe parameters alarm shall display
at panel to identify unsafe condition.
2. Cartridge dust collectors shall be enabled from control panel.
3. Solenoid valve to supply shop air shall open.
4. Opening the exterior doors shall shut down the system.
4
Blasting Recovery Equipment
After blasting, abrasive that is found on the floor can be swept into the floor
hopper. The high efficiency fan will carry the abrasive to the cyclonic system.
The cyclonic system will separate the dust from good abrasive. The dust will then
be transferred to the dust collector (DC-1). The good abrasive is retained in the
storage hopper until the pressure vessel requires filling.
Ventilation Pressurization System
The non-explosion proof electrical/controls area is provided with a pressurization fan
(SF-1) which will pressurize the area anytime the painting process is engaged. Since
the Paint Hall is negatively pressurized this system provides a secondary safety
feature.
Vehicle Exhaust System
The building is provided with two fans (EF-7,8) and fresh air intakes which will be
activated by Nitrogen Oxide and Carbon Monoxide sensors/transmitters. Once
activated the system will remove 2080L/s of air and replace it with fresh air until gas
levels are within safe operating parameters. This allows safe offloading of material
and the complete system is explosion proof.
Breathing Air System
The system is designed to provide Grade “D” Breathable air for compliance with
OSHA 29 CFR 1910.134. The system effectively removes liquid water, oily gaseous
hydrocarbons, dirt, rust, scale and other potentially dangerous contaminants, to
provide safe compressed breathing air. The onboard carbon monoxide monitor
continuously samples the air supplied for compliance with current OSHA standards.
A complete Quality Air Breathing System consists of four stage filtration, automatic
float drain, broad band monitor, audible and visual alarms, self relieving regulator
with gauge, and quick connects, all panel mounted. Operators will wear self
contained pressurized breathing suits when painting or blasting
Compressed Air
A variable speed compressor (COMP-1) provides 895kPa compressed air to a 500
gallon receiver (T-1) for facility requirements. The cartridge filter booths (DC-2 to 5)
and recovery system dust collectors (DC-1) utilize compressed air for pulse cleaning
of the filter cartridges, paint spray pumps use air as the propellant, the breathing air
system converts compressed air to breathing air. The compressed air system is
provided with an 4400L/s ventilation system (SF-2) to prevent overheating.
5
Miscellaneous Design Requirements
• Galvanized steel for general ventilation systems.
• Exterior ductwork to be insulated with 50mm rigid insulation and wrapped with
weather guard ductwork covering.
• Ducts will be routed to permit reasonable access for cleaning.
• Ductwork diffusers and air moving equipment will be designed to provide
maximum air coverage over entire length of building while meeting owners space
requirements.
• Propane system has been designed and installed by Superior Propane
• Compressed air piping will be threaded steel pipe to ASTM A53.
1.0.3 Controls
Painting System
Programmable Logic Controller will provide the control logic to operate the paint
system sequence of operation and safety interlocks. Sensors, transmitters and similar
devices will use industry standard protocol and be explosion proof design where
required.
Blasting System
The blasting and blasting recovery system have manufacturer provided line voltage
control panels which allow enabling and disabling of the equipment. There is a
pneumatically operated kill switch on the blasting system in case of emergency
Breathing Air System
Manufacturer supplied controls will indicate when dangerous breathing conditions
exist and alert the worker.
Vehicle Exhaust System
Programmable Logic Controller will provide the control logic to operate system.
6
2.0 Electrical
2.0.1 Life Safety
Fire Alarm
The building will be provided with a fire alarm system to the requirements of the
National Building Code of Canada. The system will be single stage and will include
thermal and smoke detectors, manual pull stations, alarm horns and strobe lights,
where required. The system alarms will be visible and audible throughout the
building, taking into consideration occupants who may be hearing impaired. The
control panel shall be microprocessor-based, supervised, with space for future
expansion. Bypass switches will be provided on the panel to allow testing of bells,
fan shut down or remote station notification. All fire alarm field initiating devices
will be addressable including heat and smoke detectors. A passive graphic will be
located in the main lobby displaying the layout and zoning for fire department
officials. Devices will be suitable for Class 1, Division 1 usage where required.
Exit Lighting Systems
Exits and means of egress will be marked by electrically illuminated exit signs. Exit
signs will use energy efficient LED lamps, be self powered through internal batteries
and meet the requirements of the National Building Code of Canada and Life Safety
Code. “Running Man” type exit signs will be used. Where required, signs will be
suitable for Class 1, Division 1 installation.
Emergency Lighting Systems
Emergency lighting will be provided throughout the building in accordance with the
requirements of the National Building Code of Canada and the Life Safety Code
(NFPA 101). Emergency Lighting will be provided throughout the entire building.
Lighting units will use batteries as power supply and shall have capacity sufficient to
provide illumination for 90 minutes. Conventional battery packs will be used as
appropriate. Fixtures installed in Class 1, Division 1 locations will be rated for Class
1, Division 1 use.
2.0.2 Electrical Service
Electrical Distribution Overview
Based on the size of the building and our past experience with similar projects, the
expected demand load is in the order of 364kW. We expect the electrical service
shall be sized 600A, 347/600V. Generally, mechanical, lighting, heating, and other
large loads will be supplied at 347/600V while receptacles and general power will be
supplied at 120/208V.
7
Exterior Load Break Switches
A set of pole-mounted exterior load break switches will be supplied and installed by
the electric power utility. The electrical consultant will coordinate with the utility to
provide any required information.
Interior Switchgear
Distribution equipment shall consist primarily of moulded-case style distribution and
panel boards.
Distribution Transformers
Pole-mounted transformers will be supplied and installed by the electric power
utility. The electrical consultant will coordinate with the utility to provide any
required information. The transformers will be installed on the existing service pole
and replace the existing transformer bank. The new owner supplied drop pole will be
located as close as possible to the building while maintaining the required clearances.
Underground transformer duct bank location will also be selected to be lower than
the main electrical room in order to prevent water entry through the service conduits.
A cash allowance shall be used to cover any contribution in aid of construction.
Underground Service
Underground ducts will be installed on the low voltage side of the transformers.
Service Entrance Equipment
The main service entrance will consist of two sections a switchboard incorporating a
main breaker rated at 600A complete with a utility metering compartment and a
circuit breaker style distribution section
2.0.2 Electrical Equipment
Conductors
Wire size for power or lighting circuits will be minimum No. 12 AWG with bonding
conductors a minimum of No. 14 AWG. In general, wire type will be copper with
RW90 XLPE insulation. Insulation ratings will be a minimum of 600V. Aluminum
alloy conductors will be acceptable for feeders and branch circuits #6AWG and
larger, in order to achieve cost savings.
Conductors running exposed through the paint hall shall be of a type acceptable for
installation in Class 1, Division 1 explosion-proof environments. Generally this shall
be Teck cable. Rigid galvanized conduit will also be acceptable.
8
Dry-Type Transformers
Transformers will have high efficiency at low loads and have a minimum K7
harmonic current capacity. Transformers will be equipped with hinged doors to
decrease shock and arcing hazards during maintenance.
Disconnect/Safety Switches
Fused and non-fused disconnect switches will be required for code compliance in
association with mechanical systems. Disconnects shall be capable of being locked in
either position, with mechanically interlocked doors.
Equipment Enclosure
Equipment enclosures shall be rated NEMA 1 and will be equipped with sprinkler
shields and water-tight connections.
All equipment located in the paint hall shall be equipped with Class 1, Division 1
rated explosion-proof enclosures.
Junction Boxes
Junction boxes shall meet the requirements of the Department of Transportation and
Works master specification. Where junction boxes are installed in the paint hall they
shall be rated for a Class 1, Division 1 explosion-proof environment.
Wiring Devices
Generally, receptacles, switches, and other wiring devices shall be ivory in colour,
specification grade, with stainless steel cover plates. Circuit tags shall be affixed to
wiring devices to aid in future maintenance. All wiring devices installed in the paint
hall shall be rated for a Class 1, Division 1 explosion-proof environment.
Circuit Breakers
All moulded case circuit breakers shall be bolt-on type.
Conduits
All interior conduits installed above ground shall be thin wall EMT, except in the
paint hall where they shall be rigid galvanized conduit. Underground and in-slab
conduit will be PVC. All exterior conduits installed above ground shall be epoxy
coated rigid galvanized.
9
Motor Starters
Where possible, motor starters shall act as both actuating devices and physical
disconnects. Hand-Off-Auto operation will be typical of most starters.
Grounding
All ground conductors will be copper. The ground system shall consist of rod-type
electrodes connected with a bare, stranded grounding conductor. The water entrance
pipe shall not be used as the main electrode, though it may be connected to the
ground bus in order to improve the system ground.
Contactors
Contactors shall be installed for the control of exterior lights and other systems on
automatic time control.
Electric Heating
Backup electric heating will be provided to the mechanical heating systems. Unit
heaters will be used in most areas. Where heaters are installed in the paint hall they
shall be rated for installation in Class 1, Division 1 explosion-proof environments.
Lighting
Lighting systems will use fluorescent lamps. Where lights are installed in the paint
hall they shall be rated for installation in Class 1, Division 1 explosion-proof
environments.
10
Innovation and Leading Technology
pneumatic recovery system
for blast rooms
ECO is a leader in its field in the design, fabrication and installation of sandblasting rooms.
Depending on your surface treatment requirements, we can provide a complete turn-key
solution including a new room, or provide the necessary equipment and technical support
to guide you in the self manufacturing of your room. This option makes it possible to save
substantially on your construction expenses.
With minimal to no maintenance required, the ECO Pneumatic System will provide a safe
and efficient indoor surface treatment environment, independent of outdoor weather
conditions. The result is a safer environment for the operators as well as providing protection
against harmful sandblasting dust.
The ECO pneumatic recovery system feature the safest and most effective process in
surface treatment while recycling the most popular abrasives such as glass bead, aluminum
oxide, steel shot, and steel grit. Manufacturers achieve substantial consumption savings of
abrasives (recycling rates of 95% and more can be realized).
Features
Technical
ECO offers various types of recovery floor configurations which can be adapted according to your
space and production requirements. Mounted on the surface or excavated, dimensions can vary from
4 feet in length for compact installations, to more than 40 feet for high output industrial facilities. The
configurations are pratically infinite.
Our shallow and space saving recovery design is easy to install and requires limited maintenance.
Most excavated installations only require a 17’’ excavation. Our recovery systems can utilize your
existing blast and safety equipment. The fundamentals behind an effective Recovery Systems are to
recover, recycle and re-use the abrasive.
R.O.I. (Return on investment)
Recycling abrasives will enable the user to achieve considerable savings in abrasives consumption
while protecting the environment from harmful sandblast dust.
Steel grit abrasives can be recycled and used up to 100 times compared to only on use with the nonrecyclable media.The non-recyclable sandblasting abrasives are low in cost but they can only be used
for one sandblasting cycle. Because of their fragile molecular structure, they deteriorate quickly while
generating harmful sandblasting dust and significantly reduce the visibility of the operators.
Recyclable Abrasives vs Non-Recyclable Abrasives (consumption @ 4 000 lbs / day)
Description
Silica Sand
Steel Grit
Savings $/ day
lbs. per day
4 000
4 000
--/--
($0.12 x 4000)
x100 % = $ 480
($0.75 x 4000) x 5 %
= $ 150
$ 330.00
Cleaning
4h x $ 25
2h x $ 25
$ 50.00
Abrasive disposal cost
$8 / day
$0.40 / day
$ 7.60
$0.00 / day
$6.00 / day
- $ 6.00
Abrasive (price/lbs) x % breakdown
Additional electrical cost
(600V - 8A)
Total savings per day : $ 381.60
Please contact one of our specialists in surface treatment. They will be able to analyze your
needs and evaluate all the technical and financial benefits associated with our recovery and
recycling systems.
06-19-2013
Sandblasting Rooms
2
MRS200 recovery system with options
Optional muffler
High efficiency
Blower
Cyclonic system
Large particles
screening
DCM200 dust
collector
Media storage
hopper
Pressure vessel
Optional dust
barrel with leg
extension to
accommodate a
55 gal. drum
06-19-2013
Floor recovery
trough
Sandblasting Rooms
33
How it works
Recycler
Dust collector
Lighting
Optional
rubberized
walls
Storage
hopper
Pressure
vessel
Doors
Floor
Recovery pit
The operation of a pneumatic recovery system is very simple. Following the blasting process, the residual
abrasives accumulated on the floor can be manually or mechanically swept into the recovery pit.
The pneumatic recovery system collects and conveys the used abrasive to the recycler to be cleaned
and recycled. The clean abrasive is then deposited in the pressure vessel to be used again for disposal
blasting process, while the dust is conveyed to the filtration system.
recyclable Abrasives
Type of abrasive
Hardness
Durability
Density
Glass Beads
SAE Steel Shot
50-60 Rc (5-7 Mohs)
42-65 Rc (6-8 Mohs)
5-8 cycles
100-200 cycles
2.6 g/cc
7.4 g/cc
Stainless Steel Shot
Plastic Media
Aluminium oxide
Ultra Soft Shot
20 Rc (work hardens to 60 Rc)
3-4 Mohs
50-65 Rc (5-7 Mohs)
3-3.5 Mohs
3500-4500 cycles
4-6 cycles
25-40 cycles
100-200 cycles
7.0 g/cc
1.5 g/cc
3.7 g/cc
7.4 g/cc
06-19-2013
Sandblasting Rooms
4
operator’s air filtration system
ECO povide a 4 stages filtration system for operator’s breathable air fed hood.
System will remove moisture, oil vapors, gaseous hydro carbons, dirt rust scale and other potentially dangerous
contaminants to provide clean sorte compressed breathing quality air.
The onboard carbon monoxide monitor constantly samples the supplied air for compliance with OSHA standards.
Main air
inlet
DCM200
To sandblast room dust collector
Option : 4 stage filter
Pressure vessel
06-19-2013
Sandblasting Rooms
55
choices of Pressure vessel
We have a large range of heavy duty portable and stationary sandblast pots.
Model 346
3.5 pi3 capacity
Model 646
6.5 pi3 capacity
Pressure hold system
• Reduce abrasive consumption
• Reduce moisture problems
• Lower air consumption
• Less mechanical wear
• Smooth start and stop
06-19-2013
Model 1046
10 pi3 capacity
Sandblasting Rooms
6
blast room electrical control panel
ECO can supply a prewired main control panel for easy control access to all majors components, with motor
overload and emergency stop button.
Main Control Panel
06-19-2013
Sandblasting Rooms
77
blastroom dust collector
A wide selection of models is available, up to 50 000 CFM.
Vertical design of the our cartridges provides more efficient pulsing of dust, eliminating uneven dust
loading associated with horizontally mounted cartridges.
Automatic pulse cartridge cleaner
Simple and safe cartridge replacement system
that does not require any tool.
A warning light indicates when the cartridges
must be replaced.
06-19-2013
Sandblasting Rooms
8
Sand blast room systems
We offer a vast choice of customized systems to meet your needs.
06-19-2013
Sandblasting Rooms
99
some examples of Sand blast room interiors
Full recovery floor
Triple or dual recovery floor
06-19-2013
Sandblasting Rooms
10
Pressure vessel c/w storage Hopper example
06-19-2013
Sandblasting Rooms
11
11
Our mission
Who we are
ECOblast is a leading industrial manufacturer of standard and custom engineered
equipment for the surface treatment industry and the solvent recycling industry.
Mission
ECOblast is dedicated to being an innovative and trusted supplier in the conception,
fabrication and distribution of surface treatment equipment and recycling equipment.
The success of our mission relies on the following core values :
Innovation
Integrity
Quality
Markets served
The products, technologies and industry expertise of ECOblast are used in a wide
range of manufacturing and industrial applications, including but not limited to :
•
General Manufacturing & Construction
• Industrial Equipment
• Aerospace and Military
• Shipyards
• Automotive & Railroads
• Foundry & Forge
• Power & Energy
• Steel Fabrication
For more details about other options and available accessories, sales, warranties,
distribution and service, contact us at :
1 877 629-8202
450 963-5122
Head office : 4160 Industrial
12 Blvd. Laval Quebec Canada H7L 6H1
Tel. :
Tel. :
450 963-2200
Fax :
www.ecoind.com • [email protected]
½®±-- ª»²¬·´¿¬·±² ½¿®¬®·¼¹» ¼«-¬ ½±´´»½¬±®
ÜÝóîôíôìôë
ÓÝÞ ÍÛÎ×ÛÍ
ÓÝÞ ÍÛÎ×ÛÍ
É¸»² ·¬ ½±³»- ¬± -«°»®·±®
ÌØÛ ÓÑÍÌ
»ºº·½·»²¬ô ¯«·»¬
ßÒÜ
½±-¬ó»ºº»½¬·ª»
ÍÇÍÌÛÓ ÚÑÎ
½´»¿²»® º¿½¬±®§ ¿·®ò
¿ª¿·´¿¾´» ¿- ¿ -·²¹´» «²·¬
±® ·² ½±³¾·²¿¬·±² ©·¬¸ ¿
½±²¬¿·²³»²¬ ¾±±¬¸ò
ß É×ÜÛ ÎßÒÙÛ
ÑÚ ßÐÐÔ×ÝßÌ×ÑÒÍ
¾»¬¬»® ½¸±·½» ¬¸¿² ¬¸»
×¼»¿´ º±® ¿°°´·½¿¬·±²- ©¸»®»
ÓÝÞ Í»®·»- Ý®±-- Ê»²¬·´¿¬·±²
-±«®½» ½¿°¬«®» ·- ·³°®¿½¬·½¿´ô
Ý¿®¬®·¼¹» Ü«-¬ Ý±´´»½¬±®ò
ÓÝÞ «²·¬- ®»³±ª» º·²»
Ü»-·¹²»¼ ¾§ ¬¸» ´»¿¼·²¹ ¿·®
¿·®¾±®²» ¼«-¬ ®»-«´¬·²¹ º®±³ ¿
¯«¿´·¬§ »¨°»®¬- ¿¬ Ë²·¬»¼ ß·®
ª¿®·»¬§ ±º º·²·-¸·²¹ ±°»®¿¬·±²-ò
Í°»½·¿´·-¬-ô ¬¸·- ½±³°´»¬»´§
Þ»½¿«-» ©±®µ»®- ¾»²»º·¬
-»´ºó½±²¬¿·²»¼ -§-¬»³ °®±ª·¼»-
º®±³ ½±³°´»¬» º®»»¼±³ ±º
¸·¹¸óº·´¬®¿¬·±² »ºº·½·»²½§ô
³±ª»³»²¬ô »¨½»´´»²¬ ´·¹¸¬·²¹
º®»»¼±³ º®±³ -±«®½» ½¿°¬«®»
¿²¼ ¿ ½´»¿² ¾®»¿¬¸·²¹ ¦±²»ô
±¾-¬®«½¬·±²- ¿²¼ »¿-§
¬¸»§ ½¿² »¿-·´§ °»®º±®³
³¿·²¬»²¿²½»ò Ð´«-ô ·¬ ±ºº»®-
¿²§ ¬§°» ±º ³¿²«º¿½¬«®·²¹
¿ª¿·´¿¾´» ¿- ¿ -·²¹´» «²·¬
-¿²¼·²¹ ¿²¼ ©»´¼·²¹ ¬±
±® ·² ½±³¾·²¿¬·±² ©·¬¸ ¿
¿¾®¿-·ª» ¾´¿-¬·²¹ô ¾¿¬½¸
½±²¬¿·²³»²¬ ¾±±¬¸ò
³·¨·²¹ ¿²¼ °±©¼»® ½±¿¬·²¹ò
ÑÒÛ ÝÑÍÌóÛÚÚÛÝÌ×ÊÛ ÐßÝÕßÙÛ
Ù×ÊÛÍ ÇÑË ßÔÔ ÌØÛÍÛ
Þ¿½µ©¿®¼ó×²½´·²»¼ ß·®º±·´ É¸»»´ ú
ÊßÔËßÞÔÛ ÚÛßÌËÎÛÍæ
Ô±© ÎÐÓ Ó±¬±®
Ø·¹¸óÛºº·½·»²½§ Ü«-¬ Ú·´¬®¿¬·±²
Ð®»ª»²¬- º·²» ¼«-¬ º®±³ ³·¹®¿¬·²¹ ¬±
¿®»¿- ©·¬¸ -»²-·¬·ª» »´»½¬®·½¿´ ¿²¼
®»¼«½·²¹ º¿½·´·¬§ ³¿·²¬»²¿²½»ò
Ð®±ª·¼»- ¬¸» ¯«·»¬»-¬ ¿²¼ ³±-¬ »ºº·½·»²¬
±°»®¿¬·²¹ -§-¬»³ ·² ¬¸» ·²¼«-¬®§ò
Ð±©¼»®
Ý±¿¬»¼ Ú·²·-¸
ß´´ ½±³°±²»²¬- ¸¿ª»
»´»½¬®±-¬¿¬·½¿´´§ ¿°°´·»¼
°¿·²¬ ¬¸¿¬ °®»ª»²¬º¿¼·²¹ ¿²¼ ½¸¿´µ·²¹ò
×²¬»®²¿´ Ð«´-»
Ý´»¿²·²¹ Í§-¬»³
Û²-«®»- »¨¬®»³»´§
¯«·»¬ ±°»®¿¬·±²ò
Û²´¿®¹»¼
Ô±«ª»® Ü±±®Ê»®¬·½¿´ ¼±±®- ©·¬¸
·²½®»¿-»¼ ¸»·¹¸¬
»ºº»½¬·ª»´§ -©»»°
Ø·¹¸óÛºº·½·»²½§ Ú·´¬»®Ð®±ª·¼» ´±²¹ º·´¬»® ´·º» º±® ¿
ª¿®·»¬§ ±º ¿°°´·½¿¬·±²-ò
Ý«-¬±³·¦»¼ Þ±±¬¸
Ý±²º·¹«®¿¬·±²ßª¿·´¿¾´» ¬± ³»»¬ -°»½·º·½ ®»¯«·®»³»²¬-ô
¿- ©»´´ ¿- -»ª»®¿´ ±°¬·±²- º±® »²½´±-«®» ¿²¼
©¿´´ ³¿¬»®·¿´-ò
Ó±¼«´¿® Ü»-·¹²
ß´´±©- º±® °®±°»® -·¦·²¹ º±® »¿½¸ -°»½·º·½ «-»®
¿²¼ ½«-¬±³»® ¿°°´·½¿¬·±²ò
Ý¿³ó¿½¬·±²
Ô±½µ·²¹ Ü»ª·½»
Ú¿½·´·¬¿¬»- º¿-¬ô -·³°´» ¿²¼
¬±±´óº®»» ½¿®¬®·¼¹» º·´¬»®
·²-¬¿´´¿¬·±² ¿²¼ ®»°´¿½»³»²¬ò
¦±²» ±º °±¬»²¬·¿´´§
¸¿®³º«´ ½±²¬¿³·²¿²¬-ò
Í·²¹´»óÍ·¼»¼
Í»®ª·½» ß½½»-Ó¿µ»- ·¬ »¿-§ ¬± ¾¿½µ
«²·¬- «° ¿¹¿·²-¬ ¬¸»
©¿´´ -¿ª·²¹ ª¿´«¿¾´»
º´±±® -°¿½»ò
ß´«³·²«³ Ü«-¬ Ü®¿©»®©·¬¸ Ü«¿´ Ø¿²¼´»Ñºº»®- ´¿®¹» ½¿°¿½·¬§ ¼«-¬ -¬±®¿¹» ¿®»¿
©·¬¸ -¬«®¼§ô §»¬ ´·¹¸¬©»·¹¸¬ ½±²-¬®«½¬·±²
¬± ¿´´±© º±® »¿-§ ¼«-¬ ®»³±ª¿´ò
ïðóÇÛßÎ
ÉßÎÎßÒÌÇ
Í×ÆÛÍ ßÒÜ
Ü×ÓÛÒÍ×ÑÒÍ
Ê»®-¿¬·´» ½±²º·¹«®¿¬·±²¿²¼ ³«´¬·°´» ¿·®º´±©
±°¬·±²- ¿´´±© º±® ±°¬·³«³
»¯«·°³»²¬ -·¦·²¹ ¿²¼
-»´»½¬·±²ò ß¼¼·¬·±²¿´´§ô
½«-¬±³ ¾±±¬¸ -·¦»- ¿²¼
½±²º·¹«®¿¬·±²- ¿®» ¿ª¿·´¿¾´»
¬± ³»»¬ «²·¯«» ¿°°´·½¿¬·±²-ò
çù
Ó±¼»´
Þ ø·²÷
ß ø·²÷
êù
Ý´»¿² ß·®º´±© ø½º³÷
íù
ßª»®¿¹» Ú¿½»
Ê»´±½·¬§ øº°³÷
ÍÌÜ ÚÔÑÉ Ø×ÙØ ÚÔÑÉ ÍÌÜ ÚÔÑÉ Ø×ÙØ ÚÔÑÉ ÍÌÜ ÚÔÑÉ Ø×ÙØ ÚÔÑÉ
ÓÝÞóðí
ÓÝÞóðêóðïóÈ
ÓÝÞóðçóïðóÈ
ÓÝÞóïîóðîóÈ
ÓÝÞóïëóïïóÈ
ÓÝÞóïèóðíóÈ
ÓÝÞóïèóîðóÈ
ÓÝÞóîïóïîóÈ
ÓÝÞóîìóðìóÈ
ÓÝÞóîìóîïóÈ
ÓÝÞóîéóíðóÈ
íê
èð
ïïê
ïëí
ïèç
îîê
îîë
îîë
îçè
îçè
ííì
Òñß
ïðìòïê
ïðëòêê
ïðìòïê
ïðëòêê
ïðìòïê
ïðëòêê
ïðëòêê
ïðìòïê
ïðëòêê
ïðëòêê
çéòêç
ïðëòêê
ïðêòêê
ïðëòêê
ïðêòêê
ïðëòêê
ïðêòêê
ïðêòêê
ïðëòêê
ïðêòêê
ïðêòêê
Òñß
êôéëð
ïðôïîë
ïíôëðð
ïêôèéë
îðôîëð
îðôîëð
îíôêîë
îéôððð
îéôððð
íðôíéë
ìôëðð
çôððð
ïíôëðð
ïèôððð
îîôëðð
îéôððð
îéôððð
íïôëðð
íêôððð
íêôððð
ìðôëðð
Òñß
ïëð
ïëð
ïëð
ïëð
ïëð
ïëð
ïëð
ïëð
ïëð
ïëð
îðð
îðð
îðð
îðð
îðð
îðð
îðð
îðð
îðð
îðð
îðð
Ò±ò ±º Ú·´¬»® ß®»¿
Ý¿®¬®·¼¹»øº¬î÷
ì
è
ïî
ïê
îð
îì
îì
îè
íî
íî
íê
ïôíêð
îôéîð
ìôðèð
ëôììð
êôèðð
èôïêð
èôïêð
çôëîð
ïðôèèð
ïðôèèð
ïîôîìð
ÑÐÌ×ÑÒÍ ßÒÜ ßÝÝÛÍÍÑÎ×ÛÍ
Þ±±¬¸ Û²½´±-«®»ß½½±«-¬·½¿´ Ó»¬¿´ °®±ª·¼»-«°»®·±® -±«²¼ ¿¾-±®¾¬·±²
¿²¼ ³¿¨·³«³ ¼«®¿¾·´·¬§ò
ß½½±«-¬·½¿´ Ú¿¾®·½ ±ºº»®´±©»® ½±-¬ -±«²¼
½±²¬¿·²³»²¬ ¿´¬»®²¿¬·ª»ò
Ê·²§´ Ú¿¾®·½ °®±ª·¼»´±©ó½±-¬ ¼«-¬
½±²¬¿·²³»²¬ ±°¬·±²ò
ß¼¼·¬·±²¿´ ×¬»³Ü«-¬óÎ»-·-¬¿²¬ Ô·¹¸¬ Ú·¨¬«®»r
Ù¿¹»
r
Ù¿¹»
Ú·´¬»®ïò Ú·®» ®»¬¿®¼¿²¬
øÍ«°®¿óÒ»¬óÚÎ÷
îò Ø¿´ºó°´»¿¬
øÍ«°®¿óÚ·¾®±«-÷
íò Ø¿´ºó°´»¿¬ º·®» ®»¬¿®¼¿²¬
øÍ«°®¿óÚ·¾®±«-óÚÎ÷
×ÓÐÎÑÊÛÍ
ÉÑÎÕÛÎ ÐÎÑÜËÝÌ×Ê×ÌÇ
ßÒÜ ÍßÚÛÌÇ
Ñ«® ÓÝÞ Í»®·»- ¸¿¾»»² ¼»-·¹²»¼ ©·¬¸ §±«®
»³°´±§»»- ·² ³·²¼ò
Ø»´°·²¹ §±«® º¿½¬±®§
½±³°´§ ©·¬¸ ÑÍØß
®»¹«´¿¬·±²-ô ·¬ ±ºº»®-æ
Ú®»»¼±³ ±º ³±ª»³»²¬
Í·²½» ¬¸»®» ¿®» ²± ±¾-¬®«½¬·±²º®±³ -±«®½» ½¿°¬«®» ¼»ª·½»-ô
©±®µ»®- ½¿² °»®º±®³ ¬¸»·® ¶±¾©·¬¸±«¬ ¬¸» ²»»¼ º±® º«³»
¿®³-ô ¸±±¼- ±® ±¬¸»® ¾¿®®·»®-
Ì¸» ³±-¬ »ºº·½·»²¬
º«³» ®»³±ª¿´
¬¸¿¬ ½¿² ·²¬»®º»®» ©·¬¸
Ì¸» ÓÝÞ «²·¬ ½®»¿¬»-
¿²¼ °¿®¬ ³±ª»³»²¬ò
³¿²«º¿½¬«®·²¹ ±°»®¿¬·±²-
½®±--ó¼®¿º¬ ª»²¬·´¿¬·±² ¬¸¿¬
»´·³·²¿¬»- ¸¿¦¿®¼±«-
ÎÛÜËÝÛÍ ÍÛÎÊ×ÝÛ
Ì×ÓÛ ßÒÜ ÝÑÍÌ
Ñ«® ÓÝÞ «²·¬- ¿´-± ¹®»¿¬´§
®»¼«½» ¿·® ½´»¿²·²¹ ½±-¬-ò
Ì¸» ´±©»-¬ -±«²¼ ´»ª»´-
½±²¬¿³·²¿²¬- ¾»º±®»
®»½·®½«´¿¬·²¹ ½´»¿² ¿·®ò Ð´«-ô
¯«·»¬»-¬ »²ª·®±²³»²¬¿´ ½±²¬®±´
¬¸» ÓÝÞ °®»ª»²¬- º·²» ¼«-¬
¾±±¬¸ô ¬¸» ÓÝÞ «²·¬ «-»- ¿²
º®±³ ³·¹®¿¬·²¹ ¬± ¿®»¿-
»²½´±-»¼ °«´-» ½´»¿²·²¹
©·¬¸ -»²-·¬·ª» »´»½¬®·½¿´ ¿²¼
-§-¬»³ ¬¸¿¬ ´·³·¬- -±«²¼
´»ª»´- «° ¬± ëðû ´»-- ¬¸¿²
®»¼«½·²¹ º¿½·´·¬§ ³¿·²¬»²¿²½»ò
½±³°»¬·¬·ª» ³±¼»´-ò
Û¿-§ ·²-¬¿´´¿¬·±²
¿²¼ ·²-°»½¬·±²
Î»¯«·®·²¹ ²± ¼«½¬ ©±®µô º»©»®
¿--»³¾´§ ³±¼«´»- ¿²¼ ´»-»´»½¬®·½¿´ ¸±±µ«°- ¿²¼ ³±¬±®-ô
¬¸» ÓÝÞ «²·¬ ·- -·³°´» ¬±
·²-¬¿´´ò Ð´«-ô ·¬ ®»¯«·®»- ²± ®»¿®
»¿-§ ¿²¼ ±°¬·³·¦·²¹ º´±±® -°¿½»ò
Ú»©»® ½¿®¬®·¼¹»
½¸¿²¹» ±«¬Ë-·²¹ ¿¼ª¿²½»¼ ½±³°«¬»®
³±¼»´·²¹ô ±«® »²¹·²»»®- ¸¿ª»
¼»ª»´±°»¼ ¿ -«°»®·±® ½´»¿²·²¹
-§-¬»³ ¬¸¿¬ »¨¬»²¼- ½¿®¬®·¼¹»
º·´¬»® ´·º»ò
Î»¼«½»¼ «¬·´·¬§ ½±-¬ß -«°»®·±® ´±«ª»® ¼±±® ¼»-·¹²
»²-«®»- ±°¬·³¿´ ¿·®º´±© ¿½®±-·²¬± ®»¼«½»¼ -§-¬»³ ´±--»¿²¼ »²»®¹§ ®»¯«·®»³»²¬-ò
©©©ò«¿-·²½ò½±³
º»¿¬«®·²¹ Ð®±Ì«®¿r Ò¿²±º·¾»® ¬»½¸²±´±¹§
Ü « - ¬ Ý± ´´ »½ ¬ ± ® Î »°´ ¿ ½ »³ » ²¬ Ú ·´ ¬ »® -
Ý¿®¬®·¼¹» Ú·´¬»®-
Ü·-½±ª»® ¬¸»
¼·ºº»®»²½» ·²
°»®º±®³¿²½»
¿²¼ ª¿´«»
×ÒÊÛÍÌ ×Ò ÌØÛ ÞÛÍÌ
Õ»»° §±«® ¼«-¬ ½±´´»½¬±®- ®«²²·²¹ »ºº·½·»²¬´§ ¿²¼ »²»®¹§
-³¿®¬ ©·¬¸ ¸·¹¸ó¯«¿´·¬§ ½¿®¬®·¼¹» º·´¬»®- º®±³ Ë²·¬»¼ ß·®
Ð®±Ì«®¿r
°»®º±®³¿²½»ô »ºº·½·»²½§ ¿²¼ ª¿´«»ò É¸»¬¸»® ·²²±ª¿¬·²¹ ²»©
º·´¬®¿¬·±² ³»¼·¿ô ·³°®±ª·²¹ ½¿®¬®·¼¹» º·´¬»® °»®º±®³¿²½» ±®
¼»-·¹²·²¹ ¿²¼ ³¿²«º¿½¬«®·²¹ -°»½·¿´¬§ º·´¬»®-ô ËßÍ ¼»´·ª»®- ¬¸»
¸·¹¸»-¬ ¯«¿´·¬§ ¿²¼ ª¿´«»ó¾¿-»¼ -±´«¬·±²ò
Õ»»° ·² ³·²¼ ¬¸¿¬ ²±¬ ¿´´ ½¿®¬®·¼¹» º·´¬»®- ¿®» ½®»¿¬»¼ »¯«¿´ò
Ô±©ó½±-¬ ½±³³±¼·¬§ º·´¬»®- ¬§°·½¿´´§ ¸¿ª» ¿ -¸±®¬»® º·´¬»® ´·º»
½§½´»ô ´±©»® »ºº·½·»²½§ ®¿¬·²¹ ¿²¼ ¿½¬«¿´´§ ½±²¬®·¾«¬» ¬± ¿²
·²½®»¿-» ·² ¬¸» »²»®¹§ ¼»³¿²¼- ±º ¿ ¼«-¬ ½±´´»½¬·±² -§-¬»³ò
×² ¬¸» ´±²¹ ®«²ô «-» ±º ¹»²»®·½ º·´¬»®- ¼®·ª»- «° ±°»®¿¬·±²¿´
½±-¬- ¼«» ¬± ¬¸» ²»»¼ º±® ³±®» º®»¯«»²¬ º·´¬»® ®»°´¿½»³»²¬-ô
·²½®»¿-»¼ ½±³°®»--»¼ ¿·® ½±²-«³°¬·±² ¿²¼ ¸·¹¸»®
³¿·²¬»²¿²½»ò
ÌØÛ ÒÛÉ ÍÌßÒÜßÎÜ ×Ò
Ú×ÔÌÎßÌ×ÑÒ ÌÛÝØÒÑÔÑÙÇ
r
Ò¿²±º·¾»® ¬»½¸²±´±¹§ ¸¿- ¾»»² ·²¼»°»²¼»²¬´§ °®±ª»² ¬±
¿½¸·»ª» ¸·¹¸»® ·²·¬·¿´ »ºº·½·»²½§ô ½´»¿²»® ¿·®ô ´±©»® °®»--«®»
¼®±° ¿²¼ ¹®»¿¬»® »²»®¹§ -¿ª·²¹- ¬¸¿² ½±³³±¼·¬§ º·´¬»® ³»¼·¿ò
Ì¸·- ·- ¿½½±³°´·-¸»¼ ¾§ ¿°°´§·²¹ ¿² »¨¬®»³»´§ º·²» ©»¾ó´·µ»
³»¼·¿ò Ì¸» ½±¿¬·²¹ô ±® ²¿²±º·¾»® ´¿§»®ô ¬¸»² µ»»°- ¼«-¬ ±²
½±³°®»--»¼ ¿·® ½´»¿²·²¹ ½§½´»ò ß- ¿ ®»-«´¬ô «-»®- ¾»²»º·¬ º®±³
-»ª»®¿´ ¿¼ª¿²¬¿¹»-ô ·²½´«¼·²¹æ
¿²¼ ®»¼«½¬·±² ±º ¼«-¬
½±´´»½¬±® »³·--·±²- º±® ½´»¿²»® ¿²¼ -¿º»® ©±®µ°´¿½» ¿·®
¬± »²¸¿²½» ¼«-¬ ½¿µ»
®»´»¿-»ô ´»¿¼·²¹ ¬± »¨¬»²¼»¼ º·´¬»® ´·º»
r
©·¬¸ º»©»® °«´-»- ¿²¼
-·¹²·º·½¿²¬´§ ´»-- ½±³°®»--»¼ ¿·® «-¿¹»
±ª»® ¬¸» ´·º» ±º ¬¸» º·´¬»® ¿²¼ ´»-±ª»®¿´´ »²»®¹§ ½±-¬ ¬± ±°»®¿¬» ¬¸» -§-¬»³
Ò¿²±º·¾»® ¬»½¸²±´±¹§ ¸¿- ¾»»² ·²¼»°»²¼»²¬´§ °®±ª»² ¬±
¿½¸·»ª» ¸·¹¸»® ·²·¬·¿´ »ºº·½·»²½§ ¬¸¿² ½±³³±¼·¬§ º·´¬»® ³»¼·¿ò
Ú×ÔÌÛÎ ÛÚÚ×Ý×ÛÒÝÇ ÎßÌ×ÒÙÍ ÚÑÎ ÝßÐÌËÎÛ ÑÚ ÝÑÓÓÑÒ ÝÑÒÌßÓ×ÒßÒÌÍ
Ý±³°±-·¬»
ßª»®¿¹»
Ð¿®¬·½´» Í·¦»
Î»³±ª¿´
Ûºº·½·»²½§ û
ËÒÜÛÎÍÌßÒÜ×ÒÙ
ÓÛÎÊ ÎßÌ×ÒÙÍ
Ý¿² ÓÛÎÊ Î¿¬·²¹- Ü»¬»®³·²» Ü«-¬ Ý±´´»½¬±® Ð»®º±®³¿²½»á
©¸·´» ·² ½±²¬®¿-¬ ¼«-¬ ½±´´»½¬±® °»®º±®³¿²½» ·- ³»¿-«®»¼ ¬¸®±«¹¸ ¬±¬¿´
»³·--·±²- ©¸·½¸ ¿®» ¬¸» ®»-«´¬ ±º ±²¹±·²¹ ¼«-¬ ¿½½«³«´¿¬·±²ô ±°»®¿¬·²¹
°®»--«®» ¿²¼ º·´¬»® ½´»¿²·²¹ ½§½´»-ò Û³·--·±²- ¿®» ³·²·³·¦»¼ ¾§ ®»¬¿·²·²¹
¼«-¬ ±² ¬¸» ³»¼·¿ -«®º¿½» ³¿µ·²¹ ·¬ »¿-·»® ¿²¼ ´»-- º®»¯«»²¬ ¬± ½´»¿²
±ººò Ì¸»®»º±®»ô ¬¸» ¾»-¬ º·´¬»® º±® ·²¼«-¬®·¿´ ¼«-¬ ½±´´»½¬±®- ©·´´ ±ºº»® ¸·¹¸
»ºº·½·»²½§ô ´±© °®»--«®» ¼®±° ¿²¼ »¨½»´´»²¬ -«®º¿½»ó´±¿¼·²¹ ½¿°¿½·¬§ ¬±
®»¼«½» »³·--·±²-ô ´±©»® ±°»®¿¬·²¹ ½±-¬- ¿²¼ »²-«®» ´±²¹»® º·´¬»® ´·º»ò
»ºº·½·»²½§ ·- ßÍØÎßÛ ëîòîô ©¸·½¸ ·- ¬¸»
³»¬¸±¼ º±® ¬»-¬·²¹ ¹»²»®¿´ ª»²¬·´¿¬·±²
¿·®ó½´»¿²·²¹ ¼»ª·½»- º±® ®»³±ª¿´
»ºº·½·»²½§ ¾§ °¿®¬·½´» -·¦»ò Ë-·²¹ ¬¸·¾»²½¸³¿®µô º·´¬»®- ¿®» ¿--·¹²»¼ ¿
ÓÛÎÊ øÓ·²·³«³ Ûºº·½·»²½§ Î»°±®¬·²¹
Ê¿´«»÷ ®¿¬·²¹ ¬± ¼»¬»®³·²» ¸±© ©»´´
¬¸»§ ½¿°¬«®» ¼«-¬ ¾¿-»¼ ±² °¿®¬·½´» -·¦»ò Ì¸» ¸·¹¸»®
¬¸» ÓÛÎÊ ®¿¬·²¹ô ¬¸» ³±®» »ºº·½·»²¬ ¬¸» º·´¬»® ·- ¿¬
®»³±ª·²¹ -³¿´´»® °¿®¬·½«´¿¬»ò
îð
ïè
ïê
ß´¬¸±«¹¸ ÓÛÎÊ ·- ·³°±®¬¿²¬ô ·¬ ½¿² ¿´-± ¾»
³·-´»¿¼·²¹ò ß º·´¬»® ³¿§ ¿½¸·»ª» ¿ ¸·¹¸ ÓÛÎÊ ®¿¬·²¹
¾«¬ ®»-«´¬ ·² ¸·¹¸»® °®»--«®» ¼®±°ò Í± ¾» ¿©¿®» ±º
º·´¬»®- ¬¸¿¬ «-» ®»-¬®·½¬·ª» -«®º¿½» ´¿§»®- ¬± ¾±±-¬
»ºº·½·»²½§ ¿- ¬¸»§ «´¬·³¿¬»´§ ´»¿¼ ¬± ¿² ·²½®»¿-» ·²
°®»--«®» ¿²¼ º®»¯«»²¬ º·´¬»® ®»°´¿½»³»²¬ò
Ý±³³±¼·¬§ º·´¬»®-
ïì
ïî
ïð
è
ïð
ïë
ïí
ïï
Ð®±Ì«®¿r Ò¿²±º·¾»® ½¿®¬®·¼¹» º·´¬»®- ²±¬ ±²´§ ±ºº»®
¿ ÓÛÎÊ ïë ®¿¬·²¹ ¾«¬ ¿´-± ¼»´·ª»® ¬¸» «´¬·³¿¬»
½±³¾·²¿¬·±² ±º ¸·¹¸ »ºº·½·»²½§ô ´±© ±°»®¿¬·²¹ ½±-¬¿²¼ ´±²¹»® º·´¬»® ´·º»ò
×²¼»°»²¼»²¬ ´¿¾ ¬»-¬·²¹ ¸¿- ½»®¬·º·»¼ Ð®±Ì«®¿r Ò¿²±º·¾»® º·´¬»®- ¿¬ ÓÛÎÊ ïëô ©¸·½¸ ³»¿²- ¬¸»§ ¿®»
«° ¬± çëû »ºº·½·»²¬ ±² ðòí ¬± ïòð ³·½®±² -·¦» ¼«-¬ò
©©©ò«¿-·²½ò½±³
ÍÛÔÛÝÌ×ÒÙ ÌØÛ Î×ÙØÌ Ú×ÔÌÛÎ ÓÛÜ×ß
Ý±²-·¼»® ¬¸»-»
º¿½¬±®- ¬± ¸»´° §±«
½¸±±-» ¬¸» ¾»-¬
º·´¬»® ³»¼·¿ º±® §±«®
·²¼«-¬®·¿´ °®±½»--
Ûºº·½·»²½§ ±º ¬¸» º·´¬»®
¿- ·¬ ®»´¿¬»- ¬± ¼«-¬
°¿®¬·½´» -·¦»
ß¾·´·¬§ ¬± º±®³ ¿²¼
»¿-·´§ ½´»¿² ¿ ¼«-¬ ½¿µ»
±² ¬¸» ³»¼·¿ -«®º¿½»
Ô±©»® ®»-·-¬¿²½»
¬± ¿·®º´±© ±ª»® ¬¸»
´·º» ±º ¬¸» º·´¬»® «-»´»-- »²»®¹§
ß³¾·»²¬ ¿·®
½¸¿®¿½¬»®·-¬·½¬¸¿¬ ³¿§ ¿ºº»½¬
¬¸» º·´¬»®
Û²¸¿²½»³»²¬- ¬±
·²½®»¿-» »ºº·½·»²½§ô
¼«®¿¾·´·¬§ô ½±®®±-·±²
®»-·-¬¿²½» ¿²¼
º·´¬»® ´·º»
Ú×ÔÌÛÎ ÑÐÌ×ÑÒÍ
Ú·´¬»® Ó»¼·¿
Í°»½·¿´ Ý¸¿®¿½¬»®·-¬·½-
ËòÍò Ûºº·½·»²½§
Î¿¬·²¹
øÓÛÎÊ÷ö
Û«®±°»¿²
Ûºº·½·»²½§
Î¿¬·²¹öö
Í«®º¿½»ó
Ô±¿¼·²¹
Ý¿°¿½·¬§
Ð®»--«®»
Ü®±°
É¿-¸¿¾´»
Ð®±Ì«®¿r Ò¿²±º·¾»®
Ø·¹¸ó»ºº·½·»²½§ Ð®±Ì«®¿ r Ò¿²±º·¾»® ³»¼·¿ °®±ª·¼»-«°»®·±® °»®º±®³¿²½» ±² »¨¬®»³»´§ º·²» ¼«-¬- ä ï
³·½®±²ò ß´-± °®±ª·¼»- »¨½»´´»²¬ -«®º¿½»ó´±¿¼·²¹ ¿²¼
°¿®¬·½´» ®»´»¿-»ò
ïë
Þ×ß Ó
ÛÒ ééçóÚç
Û¨½»´´»²¬
Ô±©»®
Ò±
Ð®±Ì«®¿r Ò¿²±º·¾»® Ú·®» Î»¬¿®¼¿²¬
øÚÎ÷
Í¿³» ¿- Ð®±Ì«®¿ r Ò¿²±º·¾»® ³»¼·¿ ©·¬¸ ¬¸» ¿¼¼»¼
¾»²»º·¬ ±º º´¿³» ®»¬¿®¼¿²¬ °®±°»®¬·»-
ïë
Þ×ß Ó
ÛÒ ééçóÚç
Û¨½»´´»²¬
Ô±©»®
Ò±
Ð®±Ì«®¿r Ò¿²±º·¾»® É·¼» Ð´»¿¬
Í¿³» ¿- Ð®±Ì«®¿ r Ò¿²±º·¾»® ³»¼·¿ ©·¬¸ ¬¸» ¿¼¼»¼
¾»²»º·¬ ±º ©·¼» °´»¿¬ -°¿½·²¹ ©¸·½¸ °®±ª·¼»»¨½»´´»²¬ -«®º¿½» ´±¿¼·²¹ ¿²¼ °¿®¬·½´» ®»´»¿-» ±º
º·¾®±«- ¿²¼ ¿¹¹´±³»®¿¬·ª» °¿®¬·½´»-
ïë
Þ×ß Ó
ÛÒ ééçóÚç
Û¨½»´´»²¬
Ô±©»®
Ò±
Ý»´´«´±-»ñÐ±´§»-¬»® Þ´»²¼ Ú·®»
Î»¬¿®¼¿²¬ øÚÎ÷
Û²¸¿²½»¼ °»®º±®³¿²½» ±ª»® ½±³³±¼·¬§ ½»´´«´±-»
³»¼·¿ ¼«» ¬± «²·¯«» ½±³¾·²¿¬·±² ±º º·¾»® -·¦»- ¿²¼
°±´§»-¬»® ¾´»²¼ô ©·¬¸ ¬¸» ¿¼¼»¼ ¾»²»º·¬ ±º º´¿³»
®»¬¿®¼¿²¬ °®±°»®¬·»-
ïð
Þ×ß Ô
ÛÒ ééçóÚë
Ð±±®
ßª»®¿¹»
Ò±
Í°«²¾±²¼ Ð±´§»-¬»®
Ø·¹¸ó-¬®»²¹¬¸ ³»¼·¿ ©·¬¸ ¿ª»®¿¹» °¿®¬·½´» ®»´»¿-»
½¸¿®¿½¬»®·-¬·½- ¿²¼ ©·¼» °´»¿¬ -°¿½·²¹
ïï
Þ×ß Ó
ÛÒ ééçóÚê
ßª»®¿¹»
Ø·¹¸»®
Ç»-
Ì¸»®³¿´´§óº«-»¼ Í°«²¾±²¼ Ð±´§»-¬»®
©·¬¸ Ø·¹¸ó»ºº·½·»²½§ »ÐÌÚÛ
Ó»³¾®¿²»
Ø·¹¸ó-¬®»²¹¬¸ ³»¼·¿ ©·¬¸ »ÐÌÚÛ ³»³¾®¿²»
°®±ª·¼»- »¨½»´´»²¬ °¿®¬·½´» ®»´»¿-»ò ß´-± ®»°»´©¿¬»® ©¸·´» ¿´´±©·²¹ ¿·® ¿²¼ ³±·-¬«®» ª¿°±® ¬± °¿--
ïê
Þ×ß Ó
ÛÒ ééçóÚç
Û¨½»´´»²¬
Ê»®§ Ø·¹¸
Ç»-
Ì¸»®³¿´´§óº«-»¼ Ý¿®¾±² ×³°®»¹²¿¬»¼
Í°«²¾±²¼ Ð±´§»-¬»® ©·¬¸ Ø·¹¸ó
»ºº·½·»²½§ »ÐÌÚÛ Ó»³¾®¿²»
Í¿³» ¿- ¬¸»®³¿´´§óº«-»¼ -°«²¾±²¼ °±´§»-¬»® ©·¬¸
¸·¹¸ó»ºº·½·»²½§ »ÐÌÚÛ ³»³¾®¿²» ©·¬¸ ¬¸» ¿¼¼»¼
¾»²»º·¬ ±º ½±²¼«½¬·ª» °®±°»®¬·»-
ïê
Þ×ß Ó
ÛÒ ééçóÚç
Û¨½»´´»²¬
Ê»®§ Ø·¹¸
Ç»-
ö ÓÛÎÊ øÓ·²·³«³ Ûºº·½·»²½§ Î»°±®¬·²¹ Ê¿´«»÷ ±º ¬¸·- ½¿®¬®·¼¹» ¸¿- ¾»»² ¼»¬»®³·²»¼ «-·²¹ ßÍØÎßÛ ëîòî ¬»-¬ -¬¿²¼¿®¼öö Þ×ß ½»®¬·º·½¿¬·±² ¾¿-»¼ ±² ¼«-¬ ½´¿--·º·½¿¬·±² Ü×Ò ÛÒ êðííëóîóêç
ÎÑËÒÜ ÝßÎÌÎ×ÜÙÛÍ
ÑÊßÔ ÝßÎÌÎ×ÜÙÛÍ
ÝËÍÌÑÓ ÝßÎÌÎ×ÜÙÛÍ
Ñ«® ®±«²¼ ½¿®¬®·¼¹» º·´¬»®- ®¿²µ ¿³±²¹
¬¸» ¸·¹¸»-¬ ·² °»®º±®³¿²½»ô »ºº·½·»²½§
¿²¼ ª¿´«»ò É» -¬±½µ ¿ ©·¼» ®¿²¹» ±º
ÑÛÓó-°»½·º·»¼ ®±«²¼ ®»°´¿½»³»²¬
½¿®¬®·¼¹» º·´¬»®- º±® «-» ·² ²»¿®´§
¿´´ ³¿¶±® ¾®¿²¼- ±º ¼«-¬ ½±´´»½¬·±²
-§-¬»³- ¿²¼ ·²¼«-¬®§ ¿°°´·½¿¬·±²-ò
Ì¸»§ ¿®» ¿ª¿·´¿¾´» ·² ¿² ¿--±®¬³»²¬
±º ³»¼·¿ô ·²½´«¼·²¹ ±«® °®±°®·»¬¿®§
Ð®±Ì«®¿r Ò¿²±º·¾»® º·´¬»®-ô ©¸·½¸ ¿®»
®¿¬»¼ ¿¬ ÓÛÎÊ ïë ¿²¼ ¿®» «° ¬± çëû
»ºº·½·»²¬ ±² òðí ¬± ïòð ³·½®±² -·¦» ¼«-¬ò
Ñ«® ±ª¿´ ®»°´¿½»³»²¬ ½¿®¬®·¼¹»
º·´¬»®- ¿´-± °®±ª·¼» -«°»®·±® º·´¬®¿¬·±²
¼«» ¬± ±«® ¿¼ª¿²½»¼ °®±°®·»¬¿®§
Ð®±Ì«®¿r Ò¿²±º·¾»® º·´¬®¿¬·±²
¬»½¸²±´±¹§ò Ì¸·- ¬»½¸²±´±¹§ ·-½·»²¬·º·½¿´´§ °®±ª»² ¬± ¿½¸·»ª»
¸·¹¸»® »ºº·½·»²½§ô ½´»¿²»® ¿·®ô ´±©»®
°®»--«®» ¼®±°ô ´±²¹»® º·´¬»® ´·º» ¿²¼
¹®»¿¬»® »²»®¹§ -¿ª·²¹- ¬¸¿² ¿²§
±¬¸»® ³»¼·¿ «-»¼ ·² ½¿®¬®·¼¹» º·´¬»®-ò
Ñ«® ±ª¿´ ®»°´¿½»³»²¬ ½¿®¬®·¼¹»
º·´¬»®- ¿®» ·² -¬±½µ ¿²¼ ®»¿¼§ ¬± -¸·°ò
×º §±« ®»¯«·®» ¿ ½«-¬±³ º·´¬»® ¬± ³»»¬
¿ -°»½·¿´ ¿°°´·½¿¬·±² ²»»¼ ±® ¿- ¿
®»°´¿½»³»²¬ º·´¬»® º±® ¿²±¬¸»® ¾®¿²¼ô
©» ½¿² ¼»-·¹² ¿²¼ ³¿²«º¿½¬«®» ¬¸»
®·¹¸¬ º·´¬»® ¬± ³»»¬ §±«® -°»½·º·»¼
®»¯«·®»³»²¬-ò Ý±³¾·²»¼ ©·¬¸ ±«®
»¨¬»²-·ª» ²»¬©±®µ ±º º·´¬®¿¬·±² »¨°»®¬©¸± ¿®» ½±²¬·²«¿´´§ ¼»ª»´±°·²¹ ²»©
º·´¬®¿¬·±² ¬»½¸²±´±¹§ô ±«® ¿°°´·½¿¬·±²
-°»½·¿´·-¬- ©·´´ ¸»´° §±« -»´»½¬ ¬¸»
¾»-¬ ³»¼·¿ ¿²¼ º·´¬»® ½±²º·¹«®¿¬·±² ¬±
º·¬ §±«® «²·¯«» ¿°°´·½¿¬·±²ò
Ó¿¨·³«³
Ñ°»®¿¬·²¹
Ì»³°»®¿¬«®»
ß¾®¿-·±²
Î»-·-¬¿²½»
Ý¸»³·½¿´
Ì±´»®¿²½»
ïèðp Ú ñ èîp Ý
Ù±±¼
ßª»®¿¹»
Ó±-¬ ¿°°´·½¿¬·±²- ©·¬¸ »¨¬®»³»´§ º·²» ¿²¼ ²±²óº·¾®±«- ¼«-¬
¿²¼ -±³» ¿¾®¿-·ª» ¼«-¬
ß¾®¿-·ª» ¾´¿-¬·²¹ô Ý¿®¾±² ¾´¿½µô Ü®§ ½¸»³·½¿´ °®±½»--·²¹ô
Ù»²»®¿´ ·²¼«-¬®·¿´ô Ó»¬¿´´«®¹·½¿´ °±©¼»®-ô Ð¸¿®³¿½»«¬·½¿´
½±³°±«²¼-ô Ð±©¼»® °¿·²¬
Ù±±¼
ßª»®¿¹»
ß°°´·½¿¬·±²- ©¸»®» ¬¸»®³¿´´§ó¹»²»®¿¬»¼ º«³»ô ·²½´«¼·²¹ ´·ª»
-°¿®µ-ô ½±«´¼ »²¬»® ¼«-¬ ½±´´»½¬±®
Ü®§ ©»´¼ º«³»ô Ú´¿³» ½«¬¬·²¹ô Ô¿-»® ½«¬¬·²¹ô Ó»¬¿´ ¹®·²¼·²¹
¼«-¬ô Ó»¬¿´´·½ º«³»ô Ð´¿-³¿ ½«¬¬·²¹ô Ì¸»®³¿´ -°®¿§·²¹
Ù±±¼
ßª»®¿¹»
ß°°´·½¿¬·±²- ©¸»®» ´¿®¹»® ±® ·®®»¹«´¿®´§ -¸¿°»¼ °¿®¬·½´»- »²¬»®
¼«-¬ ½±´´»½¬±®
Ý»®¿³·½-ô Ý±³°±-·¬» ¹®·²¼·²¹ô Ý±¬¬±²ô Ú·¾»®¹´¿--ô
Ú±±¼ô Ù®¿·² ¸¿²¼´·²¹ô Ô»¿¬¸»® º·²·-¸·²¹ô Ð¸¿®³¿½»«¬·½¿´
½±³°±«²¼-ô Ì»¨¬·´»-ô Ì±¾¿½½±ô É±±¼©±®µ·²¹
Ù±±¼
ßª»®¿¹»
Ù»²»®¿´ ¿°°´·½¿¬·±²- ©·¬¸ ¼®§ô ½±¿®-» °¿®¬·½«´¿¬» ¿²¼ ´¿®¹»®
¬¸»®³¿´´§ó¹»²»®¿¬»¼ º«³» °¿®¬·½´»-ò Ý¿² ¿´-± ¾» «-»¼ ©¸»®»
´·ª» -°¿®µ- ½±«´¼ »²¬»® ¼«-¬ ½±´´»½¬±®ò
Ý±½±¿ô Ý±ºº»»ô Ü»¬»®¹»²¬-ô Ù»²»®¿´ ·²¼«-¬®·¿´ô Ó»¬¿´
¹®·²¼·²¹ô Ó»¬¿´ -¿²¼·²¹ô Ó·´µ °±©¼»®ô Í¿´¬ô Í¬»¿®¿¬»-ô
Í«¹¿®ô Ì»¨¬·´»-
±®
îéëp Ú ñ ïíëp Ý
Û¨½»´´»²¬
Û¨½»´´»²¬
ß°°´·½¿¬·±²- ©¸»®» ¸·¹¸ó-¬®»²¹¬¸ô ³±·-¬«®»ó®»-·-¬¿²¬
³»¼·¿ ¿²¼ ¹±±¼ ®»´»¿-» ½¸¿®¿½¬»®·-¬·½- ¿®» ²»½»--¿®§ò
Î»½±³³»²¼»¼ ©¸»² °®±¼«½¬ ½±²¬¿³·²¿¬·±² ³«-¬ ¾»
³·²·³·¦»¼ò
Ý¿®¼¾±¿®¼ô Ý»³»²¬ô Ý»®¿³·½-ô Ý±¬¬±²ô Ú·¾»®¹´¿--ô Ù§°-«³ô
Ô·³»ô Ð¿°»®ô Ð±´·-¸·²¹ô Ð±©¼»® ½±¿¬·²¹ô Î«¾¾»® ¹®·²¼·²¹ô
Í¸±¬ ¾´¿-¬ô Ì±¾¿½½±
±®
Û¨½»´´»²¬
Û¨½»´´»²¬
ß°°´·½¿¬·±²- ¼»³¿²¼·²¹ «´¬®¿ó¸·¹¸ »ºº·½·»²½·»- ±® ¼·ºº·½«´¬
¼«-¬ ½¿µ» ®»´»¿-»ò Ø·¹¸´§ ®»½±³³»²¼»¼ º±® ½¸»³·½¿´ô º±±¼
¿²¼ ·²¼«-¬®·¿´ °®±½»--·²¹ ©¸»² °®±¼«½¬ ½±²¬¿³·²¿¬·±² ³«-¬
¾» ³·²·³·¦»¼ò Û¨½»´´»²¬ °»®º±®³¿²½» ±² ³±·-¬ô ¸§¹®±-½±°·½
±® ¿¹¹´±³»®¿¬·ª» ¼«-¬ò
ß¹¹´±³»®¿¬·²¹ ³¿¬»®·¿´-ô ß-¾»-¬±-ô Ý¸»³·½¿´ °®±½»--·²¹ô
Ú´«·¼·¦»¼ ¾»¼ ¼®§»®-ô Ú±±¼ °®±½»--·²¹ øÚ´±«®ô Í¬¿®½¸ô Í«¹¿®ô
É¸»§÷ô Ð»-¬·½·¼»-
±®
Û¨½»´´»²¬
Û¨½»´´»²¬
ß°°´·½¿¬·±²- ©¸»®» ½±²ª»§»¼ ¼«-¬ ³¿§ ¹»²»®¿¬» -¬¿¬·½
½¸¿®¹»- ¬¸¿¬ ®»¯«·®» ¼·--·°¿¬·±²ò Ý¿² ¾» «-»¼ ·² »¨°´±-·ª»
¼«-¬ ¿°°´·½¿¬·±²- ¬± ´»--»² ¬¸» ®·-µ ±º ·¹²·¬·±² -±«®½»- ¼«» ¬±
-¬¿¬·½ »´»½¬®·½·¬§ ¼·-½¸¿®¹»-ò
Ý¸»³·½¿´ °®±½»--·²¹ô Ý±¿´ô Ú±±¼ °®±½»--·²¹ô Ù»²»®¿´
·²¼«-¬®·¿´ô Ð¸¿®³¿½»«¬·½¿´ô Ð´¿-¬·½-ô Ð±©¼»®»¼ ³¿¬»®·¿´-
ß°°´·½¿¬·±²-
×²¼«-¬®·»- ñ Ü«-¬ Ì§°»-
©©©ò«¿-·²½ò½±³
ÍËÎÚßÝÛ ÔÑßÜ×ÒÙ ÛÈÝÛÔÍ ÑÊÛÎ ÜÛÐÌØ ÔÑßÜ×ÒÙ
ËßÍ Ð®±Ì«®¿r Ò¿²±º·¾»® º·´¬»®- º»¿¬«®» ¿² «´¬®¿ó¬¸·² -«®º¿½» ´¿§»® ±º -§²¬¸»¬·½ º·¾»®- -± »¨¬®»³»´§ º·²»ô ¬¸»§ ¿®»
³»¿-«®»¼ ·² ²¿²±³»¬»®-ô ±® º®¿½¬·±²- ±º ¿ ³·½®±²ò Ì¸» ´¿§»® °®±ª·¼»- »¨½»´´»²¬ -«®º¿½»ó´±¿¼·²¹ ½¿°¿¾·´·¬·»- ¼«» ¬± ¬¸»
²¿²±ó-·¦» ·²¬»®º·¾»® °±®»- ¬¸¿¬ ³¿µ» «° ¬¸»·® ©»¾ó´·µ» -«®º¿½» ½±¿¬·²¹ò Ð®±Ì«®¿ Ò¿²±º·¾»®ô ¬¸»®»º±®»ô ¿½¬- ¿- ¿ -¸·»´¼
¿ ®»-«´¬ô ¼«-¬ °¿®¬·½´»- ¿®» »¿-·´§ ®»´»¿-»¼ º®±³ ¬¸» -«®º¿½» ´¿§»® ©¸·´» ¬¸» ³»¼·¿ -«¾-¬®¿¬» ®»³¿·²- ½´»¿² ´»¿¼·²¹ ¬±
º»©»® ½´»¿²·²¹ ½§½´»- ®»¯«·®»¼ô ´±©»® °®»--«®» ¼®±°ô ®»¼«½»¼ ±«¬´»¬ »³·--·±²- ¿²¼ ·²½®»¿-»¼ º·´¬»® ´·º»ò
r
Ý±³³±¼·¬§ ½¿®¬®·¼¹» º·´¬»®- ¿´´±© °¿®¬·½«´¿¬» ¬± »³¾»¼ ¼»»°
©·¬¸·² ¬¸» -«¾-¬®¿¬»ô ³¿µ·²¹ ¬¸»³ ³±®» ¼·ºº·½«´¬ ¬± ½´»¿²ò Ë²´·µ»
Ð®±Ì«®¿ Ò¿²±º·¾»® ½¿®¬®·¼¹»-ô ¬¸»-» ¼»°¬¸ó´±¿¼·²¹ º·´¬»®- ¸¿ª»
´¿®¹» -°¿½»- ±® °±®»- ©·¬¸·² ¬¸»·® ¾¿-» ³»¼·¿ º·¾»®- ©¸·½¸ ¿´´±©
°¿®¬·½´»- ¬± °»²»¬®¿¬» ¼»»° ©·¬¸·² ¬¸» ³»¼·¿ -«¾-¬®¿¬» ·²½®»¿-·²¹
°®»--«®» ¼®±°ò Í«¾-»¯«»²¬´§ô ¬¸»§ °´«¹ ¿¬ ¿ º¿-¬»® ®¿¬» ®»¯«·®·²¹
³±®» º®»¯«»²¬ ½´»¿²·²¹ ©¸·½¸ ´»¿¼- ¬± ·²½®»¿-»¼ ¿¾®¿-·±²ô ©»¿®
¿²¼ ®»¼«½»¼ º·´¬»® ´·º»ò Í±³» ½±³³±¼·¬§ º·´¬»®- ·²½´«¼» -«®º¿½»
¬®»¿¬³»²¬- ¾«¬ ¬¸»·® ½±¿¬·²¹- º±®³ ´¿§»®- ïðð ¬·³»- ±® ³±®»
¬¸·½µ»® ¬¸¿² Ð®±Ì«®¿ Ò¿²±º·¾»® ¬¸«- ½®»¿¬·²¹ ¿¼¼·¬·±²¿´ ¼»°¬¸ó
´±¿¼·²¹ ´¿§»®- ©¸·½¸ º«®¬¸»® ¼»½®»¿-»- ½±³³±¼·¬§ º·´¬»® ´·º»ò
ÌØÛ ÊßÔËÛ ÑÚ ÐÎÑÌËÎß
ÒßÒÑÚ×ÞÛÎ
ËßÍ Ð®±Ì«®¿ Ò¿²±º·¾»® º·´¬»®- ¼»´·ª»® ±«¬-¬¿²¼·²¹
°»®º±®³¿²½» ¿²¼ ¯«¿´·¬§ ¬± ©¸·½¸ ¬¸» ®»-«´¬- ¿®» ©»´´
¼±½«³»²¬»¼ ¿²¼ ¬·³» °®±ª»²ò Ð®±Ì«®¿ Ò¿²±º·¾»® ±ºº»®¼®¿³¿¬·½ -¿ª·²¹- ¿²¼ ª¿´«» ½±³°¿®»¼ ¬± ½±³³±¼·¬§
±® ¹»²»®·½ ¾´»²¼»¼ º·´¬»®- ·²½´«¼·²¹ ¬¸±-» ©·¬¸ ·²º»®·±®
-«®º¿½» ½±¿¬·²¹ ¬®»¿¬³»²¬-ò Ð®±Ì«®¿ Ò¿²±º·¾»® º·´¬»®- ¸»´°
§±« ³¿¨·³·¦»æ
Ô±©»® °®»--«®» ¼®±° ¿²¼ º»©»® °«´-» ½´»¿²·²¹ ½§½´»®»-«´¬ ·² «° ¬± ¼±«¾´» ¬¸» ´·º» ¿²¼ ¸¿´º ¬¸» ®»°´¿½»³»²¬
½±-¬- ©·¬¸ ²¿²±º·¾»® º·´¬»®-ò
¼«®·²¹ ½´»¿²·²¹ ¾»½¿«-» ·¬ ®»³¿·²- ±² ¬¸» ²¿²±º·¾»®
-«®º¿½» ´¿§»® ¿²¼ ¼±»- ²±¬ »³¾»¼ ©·¬¸·² ¬¸» ³»¼·¿
¾¿-» -«¾-¬®¿¬»ò ß- ¿ ®»-«´¬ô ¬¸» ²«³¾»® ±º ½±³°®»--»¼
¿·® °«´-» ½´»¿²·²¹ ½§½´»- ·- -·¹²·º·½¿²¬´§ ´»-- ¬¸«¼®¿³¿¬·½¿´´§ ®»¼«½·²¹ ½±³°®»--»¼ ¿·® «-¿¹»ò
ßÜÊßÒÌßÙÛÍ ÑÊÛÎ
ÑÎÜ×ÒßÎÇ ÒßÒÑÚ×ÞÛÎ
Ý±³°¿®»¼ ©·¬¸ ±¬¸»® ¼«-¬ ½±´´»½¬·±² ²¿²±º·¾»®
¬»½¸²±´±¹§ô Ð®±Ì«®¿ Ò¿²±º·¾»® ®¿¬»¼ ÓÛÎÊ ïë
·- «° ¬± ëðû ³±®» »ºº·½·»²¬ ±² -«¾³·½®±² -·¦»¼
°¿®¬·½´»- ¬¸¿² ±®¼·²¿®§ ²¿²±º·¾»® ®¿¬»¼ ÓÛÎÊ ïíò
ËßÍ Ð®±Ì«®¿ Ò¿²±º·¾»®- ¿®» ¿´-± «° ¬± éðû º·²»®ô
³±®» ¼«®¿¾´» ¿²¼ -«°»®·±® ·² ¿¼¸»-·±² ¬± ¬¸»
³»¼·¿ -«¾-¬®¿¬» ±ª»® ±®¼·²¿®§ ²¿²±º·¾»®-ò
×²¼»°»²¼»²¬ ´¿¾ ®»-«´¬- ¼»³±²-¬®¿¬» ¬¸¿¬ Ð®±Ì«®¿
Ò¿²±º·¾»® ·- ¿¾´» ¬± »²¼«®» ®·¹±®±«- »²ª·®±²³»²¬¿´
¬»-¬·²¹ ½±²¼«½¬»¼ ·² ¿ ¬»-¬ ½¸¿³¾»® ¿¬ ïìðpÚ ¿²¼
ççòçû ®»´¿¬·ª» ¸«³·¼·¬§ò
éðóïëð ²¿²±³»¬»®øðòðé ¬± ðòïë ³·½®±²÷
¼®¿³¿¬·½¿´´§ ®»¼«½»- °®»--«®» ¾«·´¼ «° ®»-«´¬·²¹ ·²
®»¼«½»¼ »²»®¹§ ®»¯«·®»³»²¬- ¬± ±°»®¿¬» §±«® -§-¬»³ò
¼®±° ¿²¼ º»©»® ½´»¿²·²¹ ½§½´»- ®»-«´¬ ·² -·¹²·º·½¿²¬´§
®»¼«½»¼ ±«¬´»¬ »³·--·±²- º®±³ -§-¬»³ ±°»®¿¬·±² ¿²¼ ¿
¸»¿´¬¸·»® ©±®µ »²ª·®±²³»²¬ò
îððóíðð ²¿²±³»¬»®øðòîð ¬± ðòíð ³·½®±²÷
Ø×ÙØóÏËßÔ×ÌÇ ÝßÎÌÎ×ÜÙÛ ÓßÒËÚßÝÌËÎ×ÒÙ
É·¬¸ ³±®» ¬¸¿² éë §»¿®- ±º »¨°»®¬·-» ·² ³¿²«º¿½¬«®·²¹ ½¿®¬®·¼¹» º·´¬»®-ô ±«®
½±³³·¬³»²¬ ¬± ¯«¿´·¬§ -¸±©- ·² »ª»®§ º·´¬»® ©» ³¿µ»ò Ñ«® ¿¼ª¿²½»¼ ®»-»¿®½¸ô
¼»-·¹²ô »²¹·²»»®·²¹ ¿²¼ ¬»-¬·²¹ º¿½·´·¬·»- ¿´´±© «- ¬± ®»³¿·² ±² ¬¸» ´»¿¼·²¹ »¼¹»
±º ·²²±ª¿¬·±²ò
Ë¬·´·¦·²¹ -¬¿¬»ó±ºó¬¸»ó¿®¬ °®±¼«½¬·±² °®±½»--»-ô ©» ¾«·´¼ ¿²¼ ·²-°»½¬ »ª»®§
½¿®¬®·¼¹» ¬± »²-«®» ¬¸» ¸·¹¸»-¬ ¯«¿´·¬§ ·- ¿½¸·»ª»¼ ¬± ³»»¬ ¬¸» °»®º±®³¿²½»
®»¯«·®»³»²¬- ±º §±«® ¿°°´·½¿¬·±²ò É¸»¬¸»® §±« ¸¿ª» ¿ ËßÍ ¼«-¬ ½±´´»½¬±® ±®
¿²±¬¸»® ¾®¿²¼ô ±«® µ²±©´»¼¹»¿¾´» ¿²¼ »¨°»®·»²½»¼ ¿°°´·½¿¬·±² -°»½·¿´·-¬-ô º·»´¼ó
¬± ¿--·-¬ §±« ¬± -»´»½¬ ¬¸» ®·¹¸¬ º·´¬»®ò
ÌØÛ ËßÍ ßÜÊßÒÌßÙÛ
Ë²·¬»¼ ß·® Í°»½·¿´·-¬- ¼»´·ª»®- ¿ «²·¯«» ¿¼ª¿²¬¿¹» ¾§ ¼»-·¹²·²¹ô ³¿²«º¿½¬«®·²¹ ¿²¼ -»´´·²¹ ²»¿®´§ »ª»®§ ¿-°»½¬ ±º ¬¸»
-±´«¬·±² ¿²¼ ·¬ ·- ½´»¿® ©¸§ ±«® ½«-¬±³»®- ¾®»¿¬¸» »¿-§ ©·¬¸ ËßÍ º·´¬»®- ¿²¼ »¯«·°³»²¬æ
r
×ÒÒÑÊßÌ×ÊÛ ×ÒÜËÍÌÎÇ ÍÑÔËÌ×ÑÒÍ
Ú×ÔÌÛÎ ÓÛÜ×ß ÎúÜ
Ê¿´«»ó»²¹·²»»®»¼ »¨°»®¬·-»
Ý±³³·¬³»²¬ ¬± ¬»½¸²±´±¹§ ·²ª»-¬³»²¬
Ý«-¬±³»®ó¼®·ª»² -±´«¬·±²-
Ð®±°®·»¬¿®§ Ð®±Ì«®¿r Ò¿²±º·¾»® º·´¬»® ³»¼·¿
Õ²±©´»¼¹»¿¾´» -«°°±®¬
ÝÔßÎÝÑÎ Ú·´¬®¿¬·±² Î»-»¿®½¸ Ý»²¬»® øÝÚÎÝ÷
Ø×ÙØ ÐÛÎÚÑÎÓßÒÝÛ
ÛÏË×ÐÓÛÒÌ
Ð¿¬»²¬»¼ ·²¼«-¬®§ó´»¿¼·²¹
¼»-·¹²Ô»ª»®¿¹» ¾»²»º·¬- ±º ³»¼·¿
¿²¼ ½¿®¬®·¼¹» ¼»-·¹²
Ì±¬¿´ ¯«¿´·¬§
³¿²«º¿½¬«®·²¹
Ý´»¿² ß·® Í±´«¬·±²
Í°»½·¿´·-¬ÏËßÔ×ÌÇ ÝßÎÌÎ×ÜÙÛ
Ú×ÔÌÛÎÍ
Û²¹·²»»®»¼ º·´¬»® ½¿®¬®·¼¹»Í¬¿¬»ó±ºó¬¸»ó¿®¬ °®±¼«½¬·±²
°®±½»--»Ó±-¬ ³¿¶±® ¾®¿²¼- ·² -¬±½µ
©©©ò«¿-·²½ò½±³
ÛÚóïôî
ÌßÙæ
ß·® Ü»²-·¬§æ ðòðéë ´¾-ñº¬Âí
Ú¿²Í»´»½¬ ê ó Ö¿²«¿®§ îðïî ª»®ò êòëòë
ÛÚóîôíôìôëôê
Ø±³» ñ ØÊßÝ ¿²¼ Î»º®·¹»®¿¬·±² ñ Ì«¾»¿¨·¿´ Ú¿²- ¿²¼ ß½½»--±®·»- ñ Þ»´¬óÜ®·ª»² Ì«¾»¿¨·¿´ Ú¿²- ñ
Ê·»© Ð®±¼«½¬ Ú¿³·´§
Ú¿²ô Ì«¾»¿¨·¿´ô íð ×²
Ì»½¸²·½¿´ Í°»½×¬»³
Ì«¾»¿¨·¿´ Ú¿²
Ó±«²¬·²¹ Ð±-·¬·±²
Ê»®¬·½¿´ñØ±®·¦±²¬¿´
Ü®·ª» Ì§°»
Þ»´¬
Ø±«-·²¹ Ó¿¬»®·¿´
Í¬»»´
Þ´¿¼» Ü·¿ò
íðþ
Ø±«-·²¹ Ú·²·-¸
Þ¿µ»¼ Û²¿³»´
ÝÚÓ à ðòðððó×²ò ÍÐ
ïîôïçð
Þ´¿¼» Ó¿¬»®·¿´
Í°¿®µ Î»-·-¬¿²¬ ß´«³·²«³
ÝÚÓ à ðòïîëó×²ò ÍÐ
ïïôéïð
Ø¦
êð
ÝÚÓ à ðòîëðó×²ò ÍÐ
ïïôïèð
Ó±¬±® ÎÐÓ
ïéíë
ÝÚÓ à ðòëððó×²ò ÍÐ
çççð
Ø»·¹¸¬
ìêóëñèþ
ÝÚÓ à ðòéëðó×²ò ÍÐ
èìèë
É·¼¬¸
ííóëñèþ
Í±²»- à ðòîëðó×²ò ÍÐ
ìï
Ó¿¨ò Ü»°¬¸
îìþ
Ø±«-·²¹ Ü·¿ò ©ñÓ¬¹ò
ííóëñèþ
à ë Ú¬ò
Ó±¬±® ØÐ
î
Ú´¿²¹»
Ó¿¨ò ÞØÐ
ïòçð
Ø±«-·²¹ Ü·¿ò ©ñ± Ó¬¹ò
Ú¿² ÎÐÓ
ïïìê
Ú´¿²¹»
Ó±¬±® Û²½´±-«®»
Ì±¬¿´´§ Û²½´±-»¼ Ú¿² Ý±±´»¼
Ð¸¿-»
í
Ê±´¬¿¹»
Ó¿¨ò Ó±¬±® Ø»·¹¸¬
îðèóîíðñìêð
ïðþ
Í¸¿º¬ Ü·¿ò
ïóíñïêþ
Ò«³¾»® ±º Þ´¿¼»-
ê
Ú«´´ Ô±¿¼ ß³°-
êòðóëòìñîòé
Ó±¬±® Ì§°»
íóÐ¸¿-»
Ó¿¨ò ×²´»¬ Ì»³°ò
îðð Ü»¹®»»- Ú
Ó¿¨ò ß³¾·»²¬ Ì»³°ò
ïðì Ü»¹®»»- Ú
Þ»¿®·²¹ Ì§°»
Þ¿´´
íðóïñîþ
×²´»¬ Ü·¿ò
íðóëñèþ
Ñ«¬´»¬ Ü·¿ò
íðóëñèþ
Þ±´¬ Ý·®½´» Ü·¿ò
íîóïñìþ
Î»°´¿½»³»²¬ Ú¿²
íÝìïè
Þ´¿¼» Í¬±½µ Ò±ò
Ý±³°¿²·±² Ú´¿²¹»
íÝììð
Í¬±½µ Ò±ò
Í¬¿²¼¿®¼-
ßÓÝß
×²½´«¼»-
Þ»´¬ ¹«¿®¼
Ü·³»²-·±² ß
ííóëñèþ
Ü·³»²-·±² Þ
ïçóïñìþ
Ü·³»²-·±² Ý
íðóïñîþ
Ü·³»²-·±² Ü
îìþ
ÛÚóéôè
ÛÚóç
Printed Date: ðéñïðñîðïì
Job: ÝúÉ Ñºº-¸±®» Ð¸¿-» î
Mark: ÛÚóç
îìòèè
Ü·¿ò
Þ»´¬ Ü®·ª» Ë°¾´¿-¬ Ý»²¬®·º«¹¿´ Î±±º Û¨¸¿«-¬
Ú¿²
ö
îèòîë
Dimensional
Ï«¿²¬·¬§
É»·¹¸¬ ©ñ± ß½½ù- ø´¾÷
éð
É»·¹¸¬ ©ñ ß½½ù- ø´¾÷
çí
Ó¿¨ Ì Ó±¬±® Ú®¿³» Í·¦»
ïòéë
ëê
Ñ°¬·±²¿´ Ü¿³°»® ø·²ò÷
Î±±º Ñ°»²·²¹ ø·²ò÷
ïéòíè
ï
ïî ¨ ïî
ïç
ïìòë ¨ ïìòë
Î»º»®»²½» ¿--»³¾´§ ª·»© ¼®¿©·²¹- º±® ¿½¬«¿´
¼·³»²-·±²- ©·¬¸ ³±«²¬»¼ ¿½½»--±®·»öÑª»®¿´´ ¸»·¹¸¬ ³¿§ ¾» ¹®»¿¬»® ¼»°»²¼·²¹ ±² ³±¬±®
Performance
Î»¯«»-¬»¼ Ê±´«³» øÝÚÓ÷
ïèð
ß½¬«¿´ Ê±´«³» øÝÚÓ÷
ïèð
Û¨¬»®²¿´ ÍÐ ø·²ò ©¹÷
ðòéë
Ì±¬¿´ ÍÐ ø·²ò ©¹÷
ðòéë
Ú¿² ÎÐÓ
ïìëð
Ñ°»®¿¬·²¹ Ð±©»® ø¸°÷
ðòï
Û´»ª¿¬·±² øº¬÷
ïôììì
ß·®-¬®»¿³ Ì»³°òøÚ÷
éð
ß·® Ü»²-·¬§ øº¬í÷
ðòðéï
Ü®·ª» Ô±-- øû÷
îìòì
Ì·° Í°»»¼ øº¬ñ³·²÷
ìôîîì
Í¬¿¬·½ Ûººò øû÷
îç
Motor
Ó±¬±® Ó±«²¬»¼
Ç»-
Í·¦» ø¸°÷
ÊñÝñÐ
ïñì
ïïëñêðñï
Û²½´±-«®»
ÛÈÐ
Ó±¬±® ÎÐÓ
ïéîë
É·²¼·²¹ÒÛÝ ÚÔßö øß³°-÷
ï
ëòè
Notes:
Sound Power by Octave Band
Í±«²¼
Ü¿¬¿
×²´»¬
êîòë
ïîë
îëð
ëðð
éê
éí
êî
ëê
ïððð îððð ìððð èððð Ô©ß
ëè
ëî
ìè
ìì
êí
¼Þß Í±²»ëî
êòê
ß´´ ¼·³»²-·±²- -¸±©² ¿®» ·² «²·¬- ±º ·²ò
öÚÔß ó ¾¿-»¼ ±² ¬¿¾´»- ïëð ±® ïìè ±º Ò¿¬·±²¿´ Û´»½¬®·½¿´
Ý±¼» îððîò ß½¬«¿´ ³±¬±® ÚÔß ³¿§ ª¿®§ô º±® -·¦·²¹ ¬¸»®³¿´
±ª»®´±¿¼ô ½±²-«´¬ º¿½¬±®§ò
Ô©ß ó ß ©»·¹¸¬»¼ -±«²¼ °±©»® ´»ª»´ô ¾¿-»¼ ±² ßÒÍ× Íïòì
¼Þß ó ß ©»·¹¸¬»¼ -±«²¼ °®»--«®» ´»ª»´ô ¾¿-»¼ ±² ïïòë ¼Þ
¿¬¬»²«¿¬·±² °»® Ñ½¬¿ª» ¾¿²¼ ¿¬ ë º¬ ó ¼Þß ´»ª»´- ¿®» ²±¬
´·½»²-»¼ ¾§ ßÓÝß ×²¬»®²¿¬·±²¿´
Í±²»- ó ½¿´½«´¿¬»¼ «-·²¹ ßÓÝß íðï ¿¬ ë º¬
ÝßÐÍ
ÄÄÓÝÔîÄÓ½´ÄÓÝÔÄÖ±¾
ìòïëòïëïî
Ú·´»-ÄîðïìÄïìêèóÝúÉ Ñºº-¸±®» Ö»²µ·²- ú Ð±©»® Ü·®»½¬ º·®»¼ °®±°¿²» «²·¬ÄÐ¸¿-» î ÝúÉ Ð¿·²¬ Ø¿´´ÄÝúÉ Ñºº-¸±®» Ð¸¿-»Ð¿¹»
îò¹º½¶
é ±º ç
Mark: ÍÚóï
ÍÚóï
×²´·²»
Ü·-½¸¿®¹»
Þ»´¬ Ü®·ª» Ý»²¬®·º«¹¿´ ×²´·²» Ú¿²
Ó±¬±®
Ý±ª»®
×²´»¬
ÐÔßÒ Ê×ÛÉ
Dimensional
Ï«¿²¬·¬§
Ó±¬±®
Ý±ª»®
ï
É»·¹¸¬ ©ñ± ß½½ù- ø´¾÷
çì
É»·¹¸¬ ©ñ ß½½ù- ø´¾÷
ïíï
Ó¿¨ Ì Ó±¬±® Ú®¿³» Í·¦»
ïìë
Ñ°¬·±²¿´ Ü¿³°»® ø·²ò÷
×²´·²»
Ü·-½¸¿®¹»
ÞÔÑÉÛÎ
ØÑËÍ×ÒÙ
×²´»¬ ïëòèéë
ïîòë
Ó±¬±®
Ý±ª»®
ïç
×²´»¬
ïê ¨ ïê
ïòð
îï
ÛÔÛÊßÌ×ÑÒ Ê×ÛÉ
ïòð
ïç
ÛÒÜ Ê×ÛÉ
Performance
Î»¯«»-¬»¼ Ê±´«³» øÝÚÓ÷
ïôëçð
ß½¬«¿´ Ê±´«³» øÝÚÓ÷
ïôëçð
Û¨¬»®²¿´ ÍÐ ø·²ò ©¹÷
ðòê
Ì±¬¿´ ÍÐ ø·²ò ©¹÷
ðòê
Ú¿² ÎÐÓ
ïêçð
Ñ°»®¿¬·²¹ Ð±©»® ø¸°÷
ðòë
Û´»ª¿¬·±² øº¬÷
ïôììì
ß·®-¬®»¿³ Ì»³°òøÚ÷
éð
ß·® Ü»²-·¬§ øº¬í÷
ðòðéï
Ü®·ª» Ô±-- øû÷
èòì
Ì·° Í°»»¼ øº¬ñ³·²÷
ëôèðè
íí
Motor
Ó±¬±® Ó±«²¬»¼
Ç»-
Í·¦» ø¸°÷
ÊñÝñÐ
íñì
îðèñêðñí
Û²½´±-«®»
ÛÈÐ
Ó±¬±® ÎÐÓ
ïéîë
ï
íòë
Notes:
Í±«²¼
Ü¿¬¿
×²´»¬
Î¿¼·¿¬»¼
êîòë
ïîë
îëð
ëðð
èî
èí
éé
éç
éê
éð
éê
éð
éð
êë
êé
êï
êí
ëé
ëé
ëí
éé
éî
¼Þß Í±²»êë
êð
ïíòé
ïðòè
ß´´ ¼·³»²-·±²- -¸±©² ¿®» ·² «²·¬- ±º ·²ò
öÚÔß ó ¾¿-»¼ ±² ¬¿¾´»- ïëð ±® ïìè ±º Ò¿¬·±²¿´ Û´»½¬®·½¿´
Ý±¼» îððîò ß½¬«¿´ ³±¬±® ÚÔß ³¿§ ª¿®§ô º±® -·¦·²¹ ¬¸»®³¿´
±ª»®´±¿¼ô ½±²-«´¬ º¿½¬±®§ò
Ô©ß ó ß ©»·¹¸¬»¼ -±«²¼ °±©»® ´»ª»´ô ¾¿-»¼ ±² ßÒÍ× Íïòì
¼Þß ó ß ©»·¹¸¬»¼ -±«²¼ °®»--«®» ´»ª»´ô ¾¿-»¼ ±² ïïòë ¼Þ
¿¬¬»²«¿¬·±² °»® Ñ½¬¿ª» ¾¿²¼ ¿¬ ë º¬ ó ¼Þß ´»ª»´- ¿®» ²±¬
´·½»²-»¼ ¾§ ßÓÝß ×²¬»®²¿¬·±²¿´
Í±²»- ó ½¿´½«´¿¬»¼ «-·²¹ ßÓÝß íðï ¿¬ ë º¬
ÝßÐÍ
ìòïëòïëïî
îò¹º½¶
ì ±º ç
Mark: ÍÚóî
ÍÚóî
×²´·²»
Ü·-½¸¿®¹»
Þ»´¬ Ü®·ª» Ý»²¬®·º«¹¿´ ×²´·²» Ú¿²
Ó±¬±®
Ý±ª»®
×²´»¬
ÐÔßÒ Ê×ÛÉ
Dimensional
Ï«¿²¬·¬§
Ó±¬±®
Ý±ª»®
ï
É»·¹¸¬ ©ñ± ß½½ù- ø´¾÷
íéé
É»·¹¸¬ ©ñ ß½½ù- ø´¾÷
ìëî
Ó¿¨ Ì Ó±¬±® Ú®¿³» Í·¦»
îïë
Ñ°¬·±²¿´ Ü¿³°»® ø·²ò÷
×²´·²»
Ü·-½¸¿®¹»
ÞÔÑÉÛÎ
ØÑËÍ×ÒÙ
×²´»¬
íìòèéë
ïê
Ó±¬±®
Ý±ª»®
íç
×²´»¬
íë ¨ íë
ïòë
ïòë
íì
íç
ÛÔÛÊßÌ×ÑÒ Ê×ÛÉ
ÛÒÜ Ê×ÛÉ
Performance
Î»¯«»-¬»¼ Ê±´«³» øÝÚÓ÷
çôíîè
ß½¬«¿´ Ê±´«³» øÝÚÓ÷
çôíîè
Û¨¬»®²¿´ ÍÐ ø·²ò ©¹÷
ðòë
Ì±¬¿´ ÍÐ ø·²ò ©¹÷
ðòë
Ú¿² ÎÐÓ
ïðíï
Ñ°»®¿¬·²¹ Ð±©»® ø¸°÷
îòèé
Û´»ª¿¬·±² øº¬÷
ïôììì
ß·®-¬®»¿³ Ì»³°òøÚ÷
éð
ß·® Ü»²-·¬§ øº¬í÷
ðòðéï
Ü®·ª» Ô±-- øû÷
ìòì
Ì·° Í°»»¼ øº¬ñ³·²÷
êôêïë
îé
Motor
Ó±¬±® Ó±«²¬»¼
Ç»-
Í·¦» ø¸°÷
ÊñÝñÐ
í
ëéëñêðñí
Û²½´±-«®»
ÛÈÐ
Ó±¬±® ÎÐÓ
ïéîë
ï
íòç
Notes:
Í±«²¼
Ü¿¬¿
×²´»¬
Î¿¼·¿¬»¼
êîòë
ïîë
îëð
ëðð
èé
çð
èé
èè
çí
èç
èí
éé
éç
éï
éç
êì
éî
ëì
êê
ëð
èè
èî
¼Þß Í±²»éê
éï
îé
ïçòï
ß´´ ¼·³»²-·±²- -¸±©² ¿®» ·² «²·¬- ±º ·²ò
öÚÔß ó ¾¿-»¼ ±² ¬¿¾´»- ïëð ±® ïìè ±º Ò¿¬·±²¿´ Û´»½¬®·½¿´
Ý±¼» îððîò ß½¬«¿´ ³±¬±® ÚÔß ³¿§ ª¿®§ô º±® -·¦·²¹ ¬¸»®³¿´
±ª»®´±¿¼ô ½±²-«´¬ º¿½¬±®§ò
Ô©ß ó ß ©»·¹¸¬»¼ -±«²¼ °±©»® ´»ª»´ô ¾¿-»¼ ±² ßÒÍ× Íïòì
¼Þß ó ß ©»·¹¸¬»¼ -±«²¼ °®»--«®» ´»ª»´ô ¾¿-»¼ ±² ïïòë ¼Þ
¿¬¬»²«¿¬·±² °»® Ñ½¬¿ª» ¾¿²¼ ¿¬ ë º¬ ó ¼Þß ´»ª»´- ¿®» ²±¬
´·½»²-»¼ ¾§ ßÓÝß ×²¬»®²¿¬·±²¿´
Í±²»- ó ½¿´½«´¿¬»¼ «-·²¹ ßÓÝß íðï ¿¬ ë º¬
ÝßÐÍ
ìòïëòïëïî
îò¹º½¶
ï ±º ç
ÓËßóï
Í«¾³·¬¬¿´
Ú·´» ²¿³»æ Ö»²µ·²- ú Ð±©»® Ü·®»½¬ Ú·®»¼ Ë²·¬ ÌÓÝ
Prepared By
Ó»½¸¿²·½¿´ Ý±³°±²»²¬- Ô¬¼ò
Ö¿-±² Ù¿´´¿²¬
Prepared For
Ö»²µ·²- ú Ð±©»®
ïïç Ý´§¼» ßª»ò
Ð¸±²»æ éðçóéìéóçéëð
Ý»´´ Ð¸±²»æ éðçóêçïóìîíê
Ú¿¨æ éðçóéìéóééëð
Û³¿·´æ ¶¿-±²à³½´·³·¬»¼ò½¿
èñïïñîðïì
Í«¾¶»½¬æ Ç±«® Ì»³°®·¬» Ü·®»½¬ Ú·®»¼ Í«¾³·¬¬¿´
Ü»¿® Í·®ñÓ¿¼¿³æ
Ç±«® ½«-¬±³·¦»¼ Ì»³°®·¬» «²·¬ ¸¿- ¾»»² ½±²º·¹«®»¼ ¿- º±´´±©-æ
Model: TMC-230
ìôèððôððð ÞÌËñØ ×²°«¬ º±® éèòêp Ú Ì»³°»®¿¬«®» Î·-» ©·¬¸ óìðp Ú ×²´»¬ Ì»³°»®¿¬«®»
ëîôððð ÍÝÚÓ ó ×ÍÐæ ïòðð ñ ß½½»--±®§ ÍÐæ òëð ñ Ü«½¬ ÍÐæ òëð ñ ÌÛÍÐæ ïòðð ñ ÌÍÐæ îòðð
ß°°®±¨·³¿¬» Ë²·¬ Í¸·° É»·¹¸¬ ø»¿½¸÷æ ìôìêë ´¾Discharge Option: Þ¿½µ ·²´»¬ô ¬±° ±«¬´»¬
Any duct work that is attached to the top of the unit must be fully supported as the unit is
not built to hold the weight of duct work
Complete with the following:
Þ¿-·½ Ú®¿³» øýîððð÷
×²´»¬ Ø±±¼ ¿²¼ Þ·®¼-½®»»² ©·¬¸±«¬ Ú·´¬»®- øýîððî÷
ÊóÞ¿²µ Ú·´¬»® Í»½¬·±² ©·¬¸ Ð´»¿¬»¼ Ú·´¬»®- ó Ï¬§ øíê÷ îðþ¨îëþ¨îþ øýîððíÐ÷
Ó±¬±®·¦»¼ ×²´»¬ ß·® Ü¿³°»® øýîððë÷
ïîþ Ø·¹¸ Î±±º Ý«®¾ ±² Þ¿-·½ Ú®¿³» øýîðïðÞ÷
×²-«´¿¬·±² ±²æ
óÞ¿-·½ Ú®¿³» øýîðïï÷ óÚ·´¬»® Í»½¬·±² øýîðïîÚ÷
Ú·²·-¸ ó Þ®·¹¸¬ Í°¿²¹´»¼ Ú·²·-¸
Ü·-½¸¿®¹» Ý±²º·¹«®¿¬·±²æ ØÎÞ ó Ø±®·¦±²¬¿´ô Î·¹¸¬ Ø¿²¼ô Þ±¬¬±³
Þ«®²»® ¿²¼ Ý±²¬®±´- øýîðëðÒ÷
Þ«®²»® Ó±¼«´¿¬·±²æ Ø·¹¸ Ì«®²¼±©² Ó±¼«´¿¬·±²
Ù¿- Ó¿²·º±´¼æ Í¬¿²¼¿®¼ ßÒÍ× Ù¿- Ì®¿·² øýîðëðÒ÷
Ú«»´æ Ò¿¬«®¿´ Ù¿- à Ñª»® ï ó î ÐÍ×Ù ×²´»¬ Ð®»--«®»
Ø·¹¸ Ð®»--«®» Ù¿- Ì®¿·² øýîðëëÒ÷
Ó±¬±® ØÐæ ìð ØÐ Ó±¬±® ¿²¼ Í¬¿®¬»® øýîðéïÝ÷
Ó±¬±® Ì§°»æ Í·²¹´» Í°»»¼ Ø·¹¸ Ûºº ÌÛÚÝ ïèðð ÎÐÓ ñ Ê±´¬¿¹»æ ëéëñíñêð
Þ´±©»® ß³°-æ ìïòð ñ Ý±²¬®±´ Ì®¿²-º±®³»® ß³°-æ òç ñ Ì±¬¿´ ß³° Ü®¿©æ ìïòç
Ü·-½±²²»½¬ øýîðéçÜ÷
Î»³±¬» Ý¬®´ Ð¿²»´óÓÜÌ Ý¬®´ Í§-¬»³ º±® ÞßÝ²»¬ Ð®±¬±½±´ øýîðèéÝ÷
ËÊ Ú´¿³» Í»²-±® øÓ·²·óÐ»»°»®÷ øýîðèè÷
Ý´±¹¹»¼ Ú·´¬»® ×²¼·½¿¬·±² øýîðèç÷
Û¨¸¿«-¬ ×²¬»®´±½µ øýîðçï÷
×²¬»®´±½µ·²¹ Î»´¿§ øýîðçî÷
ò
Í·²½»®»´§ô
Ö¿-±² Ù¿´´¿²¬
Ú¿½¬±®§ Ë-»æÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÌÓÝîíðØÎÞßîïíïððÞïððÞìððððððððßîÝìÝëÛïÛî
ÐÜÜðëîðððïðððððððð
ðìèðððìÛïÜÛ
Ê»®-·±² ïðòð
Ú·´» ²¿³»æ ÓÝÔ Ö¿-±²òÌÓÝ
Ü·®»½¬óÚ·®»¼ Ø»¿¬·²¹ô Ê»²¬·´¿¬·±²
ß²¼ Ð®»--«®·¦¿¬·±² Í§-¬»³-
ÞóÍ»®·»Ü·³»²-·±² ¿²¼ Í»´»½¬·±² Ù«·¼»
ïòèððòîëëòíìïê
©©©ò¾¿²¿²¦¿ò½±³
CA N A DA :100% O UTSIDE A IR O N LY
ÞóÍ»®·»- Í»´»½¬·±² Ù«·¼»
ÝÚÓ ø³íñ¸÷
ÓÑÌÑÎ ØÐ øµÉ÷ ßÌ ï
·² ©½ øîòë ³¾¿®÷
ÓÑÜÛÔ
ÛÈÌÛÎÒßÔ ÍÌßÌ×Ý
ÐÎÛÍÍËÎÛ
¼Þ þßþ ßÌ ï ·² ©½
øîòë ³¾¿®÷öö
ÛÈÌÛÎÒßÔ ÍÌßÌ×Ý
ÐÎÛÍÍËÎÛ
ØÛßÌ ×ÒÐËÌ ßÌ
ÓßÈò ÌÛÓÐò Î×ÍÛ
øÞ¬«ñ¸÷ ¨ ïððð
ÒÙ
ÔÐÙ
Ó×Ò×ÓËÓ
×ÒÔÛÌ
ÙßÍ ÐÎÛÍÍËÎÛ
·² ©½ ø³¾¿®÷ööö
ÓßÒ×ÚÑÔÜ
Í×ÆÛ
·² ÒÐÌ
ø³³÷
ðòéë øïç÷
ïôððð øïôéðð÷
Þóíëð
î øïòë÷
éð
çé
éê
é øïéòë÷
îôððð øíôìðð÷
Þóíëð
î øïòë÷
éð
ïçì
ïëï
é øïéòë÷
ðòéë øïç÷
íôððð øëôïðð÷
Þóíëð
í øîòî÷
éð
îçî
îîé
é øïéòë÷
ðòéë øïç÷
ìôððð øêôèðð÷
Þóíëð
í øîòî÷
éð
íèçö
íðî
é øïéòë÷
ðòéë øïç÷
ìôððð øêôèðð÷
Þóêëð
í øîòî÷
êç
ìíî
íìê
é øïéòë÷
ïòð øîë÷
ëôððð øèôëðð÷
Þóêëð
í øîòî÷
êè
ëìð
ìíî
é øïéòë÷
ïòð øîë÷
êôððð øïðôîðð÷
Þóêëð
ë øìòð÷
êé
êìè
ëïè
é øïéòë÷
ïòð øîë÷
éôððð øïïôçðð÷
Þóêëð
ë øìòð÷
êê
éëêö
êðë
é øïéòë÷
ïòð øîë÷
èôððð øïíôêðð÷
Þóêëð
ë øìòð÷
êê
èððö
êçï
é øïéòë÷
ïòð øîë÷
çôððð øïëôíðð÷
Þóêëð
éòë øëòë÷
êé
èððö
ééè
é øïéòë÷
ïòð øîë÷
ïðôððð øïéôððð÷
Þóêëð
éòë øëòë÷
êè
èððö
èðð
é øïéòë÷
ïòð øîë÷
éôððð øïïôçðð÷
Þóïððð
ë øìòð÷
êê
éëê
êðë
é øïéòë÷
ïòîë øíî÷
èôððð øïíôêðð÷
Þóïððð
ë øìòð÷
êê
èêì
êçï
é øïéòë÷
ïòîë øíî÷
çôððð øïëôíðð÷
Þóïððð
éòë øëòë÷
êé
çéî
ééè
é øïéòë÷
ïòîë øíî÷
ïðôððð øïéôððð÷
Þóïððð
éòë øëòë÷
êè
ïôðèð
èêì
é øïéòë÷
ïòîë øíî÷
ïïôððð øïèôéðð÷
Þóïððð
ïð øéòë÷
êè
ïôïèè
çëð
é øïéòë÷
ïòîë øíî÷
ïîôððð øîðôìðð÷
Þóïððð
ïð øéòë÷
êç
ïôîçê
ïôðíé
é øïéòë÷
ïòîë øíî÷
ïíôððð øîîôïðð÷
Þóïððð
ÝÚ
ÝÚ
ïôìðì
ïôïîí
é øïéòë÷
ïòîë øíî÷
ïìôððð øîíôèðð÷
Þóïððð
ÝÚ
ÝÚ
ïôëïî
ïôîïð
é øïéòë÷
ïòîë øíî÷
ïîôððð øîðôìðð÷
Þóîððð
éòë øëòë÷
éí
ïôîçê
ïôðíé
ç øîîòë÷
ïòë øíè÷
ïìôððð øîíôèðð÷
Þóîððð
ïð øéòë÷
éí
ïôëïî
ïôîïð
ç øîîòë÷
ïòë øíè÷
ïêôððð øîéôîðð÷
Þóîððð
ïð øéòë÷
éê
ïôéîè
ïôíèî
ç øîîòë÷
ïòë øíè÷
ïèôððð øíðôêðð÷
Þóîððð
ïë øïïòð÷
éé
ïôçìì
ïôëëë
ç øîîòë÷
ïòë øíè÷
îðôððð øíìôððð÷
Þóîððð
ïë øïïòð÷
éé
îôïêð
ïôéîè
ç øîîòë÷
ïòë øíè÷
îîôððð øíéôìðð÷
Þóîððð
îð øïëòð÷
éé
îôíéê
ïôçðï
ç øîîòë÷
ïòë øíè÷
îëôððð øìîôëðð÷
Þóîððð
îð øïëòð÷
éé
îôéðð
îôïêð
ç øîîòë÷
ïòë øíè÷
îëôððð øìîôëðð÷
Þóíððð
ïë øïïòð÷
éì
îôéðð
îôïêð
ïï øîéòë÷
îòð øëð÷
îéôëðð øìêôéðð÷
Þóíððð
ïë øïïòð÷
éë
îôçéð
îôíéê
ïï øîéòë÷
îòð øëð÷
íðôððð øëïôððð÷
Þóíððð
îð øïëòð÷
éê
íôîìð
îôëçî
ïï øîéòë÷
îòð øëð÷
íîôëðð øëëôîðð÷
Þóíððð
îë øïèòë÷
éé
íôëïð
îôèðè
ïï øîéòë÷
îòð øëð÷
íëôððð øëçôëðð÷
Þóíððð
îë øïèòë÷
éç
íôéèð
íôðîì
ïï øîéòë÷
îòð øëð÷
íéôëðð øêíôéðð÷
Þóíððð
íð øîîòë÷
éç
ìôðëðö
íôîìð
ïï øîéòë÷
îòð øëð÷
ìðôððð øêèôððð÷
Þóíððð
ÝÚ
ÝÚ
ìôíîðö
íôìëê
ïï øîéòë÷
íëôððð øëçôëðð÷
Þóìððð
îë øïèòë÷
éé
íôéèð
ïòë ó íòð øíè ó éê÷
íéôëðð øêíôéðð÷
Þóìððð
íð øîîòë÷
éé
ìôðëð
ìðôððð øêèôððð÷
Þóìððð
íð øîîòë÷
éé
ìôíîð
ìîôëðð øéîôîðð÷
Þóìððð
ìð øíðòð÷
éé
ìôëçð
îòð øëð÷
Òñß
ìëôððð øéêôëðð÷
Þóìððð
ìð øíðòð÷
éé
ìôèêð
ìéôëðð øèðôéðð÷
Þóìððð
ìð øíðòð÷
éè
ëôïíð
Ý±²-«´¬ Ú¿½¬±®§
ìëôððð øéêôëðð÷
Þóëððð
íð øîîòë÷
éé
ìôèêð
ìéôëðð øèðôéðð÷
Þóëððð
íð øîîòë÷
éé
ëôïíð
ëðôððð øèëôððð÷
Þóëððð
ìð øíðòð÷
éé
ëôìðð
ëîôëðð øèçôîðð÷
Þóëððð
ìð øíðòð÷
éè
ëôêéð
ëëôððð øçíôìðð÷
Þóëððð
ìð øíðòð÷
éè
ëôçìð
ëéôëðð øçéôéðð÷
Þóëððð
ìð øíðòð÷
éç
êôîïð
êðôððð øïðïôçðð÷ Þóëððð
ëð øíéòë÷
èð
êôìèð
Òñß
ÝÚ ã Ý±²-«´¬ Ú¿½¬±®§
ö Ì»³°»®¿¬«®» ®·-» ¿¬ ¬¸·- ÝÚÓ ·- ´»-- ¬¸¿² ¬¸» ³¿¨·³«³ ¬»³°»®¿¬«®» ®·-»ò
öö ¼Þ þßþ ·- ³»¿-«®»¼ ¿¬ ïðù øí ³÷ º®±³ «²¼«½¬»¼ ¼·-½¸¿®¹»ò
ööö Ó¿¨·³«³ ×²´»¬ Ù¿- Ð®»--«®»æ ßÒÍ× ó Ý±³°´·¿²¬ Ó¿²·º±´¼ øÞóíëð ó Þóíððð÷ ã ïì ·² ©½ øíìòç ³¾¿®÷
ßÒÍ× ó Ý±³°´·¿²¬ Ó¿²·º±´¼ øÞóìððð ó Þóëððð÷ ã ë °-· øíììòé ³¾¿®÷
ÚÓ ¿²¼ ÈÔ ×²-«®¿²½» øº±®³»®´§ó×Î×÷ ó Ý±³°´·¿²¬ Ó¿²·º±´¼ øß´´ Ó±¼»´-÷ ã ë °-· øíììòé ³¾¿®÷
î
Þóìððð ú Þóëððð Ó¿²·º±´¼ Í»´»½¬·±² Ý¸¿®¬Ü×ÎÛÝÌ×ÑÒÍæ
Ì± Ý¿´½«´¿¬» ÝÚØæ
ó Ú±® ÒÙ Ë²·¬æ ï ÓÞØ ã ïôððð Þ¬«ñ¸ ã ï ÝÚØ ã ðòðîè ÝÓØ ø³íñ¸÷
ó Ú±® ÔÐÙ Ë²·¬æ ï ÓÞØ ã ïôððð Þ¬«ñ¸ ã òêë ÝÚØ ã ðòðïè ÝÓØ ø³íñ¸÷
Í»´»½¬ ¿ °±·²¬ ±² ¬¸» ½¸¿®¬ ¬¸¿¬ ®»°®»-»²¬- ¬¸» ·²¬»®-»½¬·±² ±º ¬¸» ·²´»¬ ¹¿- °®»--«®» ¿²¼ ¬¸» «²·¬ ÝÚØò
Í»´»½¬ ¬¸» ³¿²·º±´¼ -·¦» ¬± ¬¸» ®·¹¸¬ ±º ¬¸·- °±·²¬ò
Ò¿¬«®¿´ Ù¿- Ú´±© ª-ò Ð®»--«®» Ü®±° «-·²¹ ¬¸» Ó¿¨±² ÒÐ ¾«®²»® º±® Þóìððð ú Þóëððð ø-°»½·º·½ ¹®¿ª·¬§ ã ðòêì÷
Ú±® ±¬¸»® ³±¼»´-ô -»» °¿¹» î º±® ³¿²·º±´¼ -·¦»-ò
Î»¯«·®»¼ Ù¿- Ð®»--«®» à Ó¿²·º±´¼ ×²´»¬ ø·² ©½÷
íïòð
îçòð
îéòð
îëòð
ïòëþ
îíòð
îïòð
îòðþ
ïçòð
ïéòð
ïëòð
ïíòð
îòëþ
ïïòð
íòðþ
çòð
éòð
ð
ïððð
îððð
íððð
ìððð
ëððð
êððð
éððð
èððð
Ý«¾·½ Ú»»¬ °»® Ø±«® øÝÚØ÷
Ò¿¬«®¿´ Ù¿- Ú´±© ª-ò Ð®»--«®» Ü®±° «-·²¹ ¬¸» Ó¿¨±² ÒÐ ¾«®²»® º±® Þóìððð ú Þóëððð ø-°»½·º·½ ¹®¿ª·¬§ ã ðòêì÷
Ú±® ±¬¸»® ³±¼»´-ô -»» °¿¹» î º±® ³¿²·º±´¼ -·¦»-ò
Î»¯«·®»¼ Ù¿- Ð®»--«®» à Ó¿²·º±´¼ ×²´»¬ ø³·´´·¾¿®-÷
ééòî
éîòî
êéòí
êîòí
íè ³³
ëéòí
ëîòí
ëï ³³
ìéòí
ìîòí
íéòì
êì ³³
íîòì
éê ³³
îéòì
îîòì
ïéòì
ð
îèòí
ëêòê
èìòç
ïïíòí
ïìïòê
Ý«¾·½ Ó»¬»®- °»® Ø±«® ø³íñ¸÷
ïêçòç
ïçèòî
îîêòë
í
Þóíëð Ë°®·¹¸¬ Ó±¼»´ Ü·³»²-·±²ß
Ý
ÛÜ
Ú
Ò
ÛÜ
Ô·º¬·²¹ Ô«¹
øÑ²» Û¿½¸ Ý±®²»®÷
Ú
Ü
Ï
Û
ÔÜ ±® ÎÜ
Ü
ÔÜ
ÎÜ
Þ
Ó
ÝÛóÑØ
ÝÛ
Í
ÝÛ
Õ
ÙÝ
ÙÝ
Ù
Ú·´¬»®
ß½½»--
ÍÌßÒÜ
øÑÐÌ×ÑÒßÔ÷
Ú·´¬»®
ß½½»--
Ñß
Ñß
Ë
Í×ÜÛ Ê×ÛÉ
ÛÒÜ Ê×ÛÉ
ÝßÞ×ÒÛÌ Ü×ÓÛÒÍ×ÑÒÍ
ÓÑÜÛÔ
Þóíëð
ì
ÝÚÓ
ß
Þ
Ý
Ü
Û
Ú
Ù
Õ
Ô
Ó
Ò
Ð
Ï
Í
Ë
É
È
ø·²÷
ø½³÷
ïôððð ó íôððð
íîòí êðòí îèòí
èîòð ïëíòî éïòç
ïðòì
îêòì
êòè
ïéòí
ïïòë
îçòî
îéòð
êèòê
ïïéòí
îçéòç
ïòë
íòè
èòð
îðòí
çòí
îíòê
ïòè
ìòê
íòï
éòç
íëòî
èçòì
íðòð
éêòî
îëòî
êìòð
íèòì
çéòë
ø·²÷
ø½³÷
ìôððð
íîòí êðòí îèòí
èîòð ïëíòî éïòç
ïíòè
íëòï
éòê
ïçòí
èòî
îðòè
îéòð
êèòê
ïïéòí
îçéòç
ïòë
íòè
èòð
îðòí
ïëòè
ìðòï
ïòè
ìòê
íòï
éòç
íëòî
èçòì
íðòð
éêòî
îëòî
êìòð
íèòì
çéòë
Þóíëð Ø±®·¦±²¬¿´ Ó±¼»´ Ü·³»²-·±²ÙÝ
Ú·´¬»® ß½½»--
Ü
ÝÛ
Û
Ú
Ó
Í
ß
ÌÜ ±® ÞÜ
ÛÜ Ò
Ñß É
ÝÛóÑØ
È
Ù
×ÒÔÛÌ ØÑÑÜ
Ú×ÔÌÛÎ ÍÛÝÌ×ÑÒ
ÐÔßÒ
Ê×ÛÉ
Ú
Þ
Ô·º¬·²¹ Ô«¹øÑ²» Û¿½¸ Ý±®²»®÷
Ú·´¬»® ß½½»-- Ô
ÌÜ
ÝÛ
Ñß
Ý
ÛÜ Ü
ÙÝ
ÞÜ
Ð
ÛÍÌ×ÓßÌÛÜ ÍØ×ÐÐ×ÒÙ ÉÛ×ÙØÌÍ
ÓÑÜÛÔ
Þóíëð
ø´¾÷
øµ¹÷
ß×Î
ØßÒÜÔÛÎ
ÍÕ×Ü
ìëðòð
îðìòï
ëðòð
îîòé
ÔÛÙÛÒÜ
Í×ÜÛ
Ê×ÛÉ
Ï
×ÓÐÑÎÌßÒÌ ÒÑÌÛÍæ
Í¸·°°·²¹ ©»·¹¸¬- ¿°°´§ ¬± ¾±¬¸ ¸±®·¦±²¬¿´ ¿²¼ «°®·¹¸¬ ³±¼»´-ò
ß´´ ¼·³»²-·±²- ¿²¼ ©»·¹¸¬- ¿®» -«¾¶»½¬ ¬± ½¸¿²¹» ©·¬¸±«¬ ²±¬·½»ò
Ñ«¬¼±±® ¿·® ¼«½¬ -·¦» ª¿®·»-ò Ý±²-«´¬ º¿½¬±®§ò
Ý±²¬®±´ »²½´±-«®» ·- ´±½¿¬»¼ ±² ¬¸» ´»º¬ -·¼» ±º ¬¸» ¿·® ¸¿²¼´»®
©¸»² ´±±µ·²¹ ¼±©²-¬®»¿³ ·²¬± ¬¸» ·²´»¬ »²¼ò
ÞÜ ã Þ±¬¬±³ Ü·-½¸¿®¹»
ÝÛ ã Ý±²¬®±´ Û²½´±-«®»
ÙÝ ã Ù¿- Ý±²²»½¬·±²
ÛÜ ã Û²¼ Ü·-½¸¿®¹»
ÔÜ ã Ô»º¬ Ü·-½¸¿®¹»
Ñß ã Ñ«¬-·¼» ß·®
Îß ã Î»¬«®² ß·® øÑ°¬·±²¿´÷
ÎÜ ã Î·¹¸¬ Ü·-½¸¿®¹»
ÌÜ ã Ì±° Ü·-½¸¿®¹»
ÑØ ã Ñ°°±-·¬» Ø¿²¼
ë
Þóêëðô Þóïðððô Þóîððð ú Þóíððð Ë°®·¹¸¬ Ó±¼»´ Ü·³»²-·±²ÛÜ
Ú
ÛÜ
Ô·º¬·²¹ Ô«¹
øÑ²» Û¿½¸ Ý±®²»®÷
ß
Ý
Ð
Ü
Ú
Ì
Û
ÔÜ ±® ÎÜ
Ü
ÔÜ
ÎÜ
Þ
Ø
Ù
Ø
Ö
Ç
ÕÕ
ÝÛ
Ë
Îß
ÙÝ
Ó
ÝÛóÑØ
Ê
Îß
ÝÛ
ÜÜ
ÙÝ
Ò
ÛÛ
Í
Ú·´¬»®
ß½½»--
Ú·´¬»®
ß½½»--
Ñß
ÍÌßÒÜ
ÝÝ
ÛÒÜ Ê×ÛÉ
Í×ÜÛ Ê×ÛÉ
ÓÑÜÛÔ
ß
Þ
Ý
Ü
Û
Þóêëðñ ø·²÷ ììòî çîòí îîòð ïçòð ïðòë
Þóïððð ø½³÷ ïïîòí îíìòì ëëòç ìèòí îêòé
Ú
Ù
Ø
Ö
Ó
Ò
Ð
Ï
Î
Í
Ì
Ë
Ê
ïïòï
îèòî
íéòç
çêòí
íòî
èòï
ïìòð
íëòê
ö
ö
îçòê
éëòî
íîòé
èíòï
ìèòï
ïîîòî
íëòï
èçòî
ïòê
ìòï
íòð
éòê
ïðòð
îëòì
íòì
èòê
É
Ç
Æ
ëêòì íéòî íìòð
ïìíòî çìòë èêòí
Þóîððð
ø·²÷ ëêòð ïïêòî íïòë íïòë ïíòè
ø½³÷ ïìîòî îçëòï èðòð èðòð íëòð
ïîòí ììòí êòð ïéòð ïèèòî ëîòê ëêòï êçòê
íïòî ïïîòë ïëòî ìíòî ìééòè ïííòê ïìîòë ïéêòè
îíòí
ëçòî
ïòë
íòè
íòç
çòç
îêòë êòð èçòí ììòð íïòð
êéòí ïëòî îîêòè ïïïòè éèòé
Þóíððð
ø·²÷ êèòð ïïêòî íêòè íêòè ïéòð
ø½³÷ ïéîòé îçëòï çíòë çíòë ìíòî
ïëòê ëêòí êòð ïéòð ïèèòî ëêòê êðòï êçòê
íçòê ïìíòð ïëòî ìíòî ìééòè ïìíòè ïëîòé ïéêòè
îíòí
ëçòî
ïòë
íòè
íòç
çòç
íðòë êòð èêòç ììòð íïòð
ééòë ïëòî îîðòé ïïïòè éèòé
öÎ»º»® ¬± Óö ·² -¬¿²¼ ½¸¿®¬ ¾»´±©ò
ÓÑÜÛÔ
Þóêëðñ
Þóïððð
Þóîððð
Þóíððð
ø·²÷
ø½³÷
ÞÞ
îèòè
éíòî
ÝÝ
öö
öö
ÜÜ
îèòê
éîòê
ÛÛ
ïòë
íòè
ÚÚ
ïòï
îòè
ÙÙ
ìïòð
ïðìòï
ØØ
ðòë
ïòí
ø·²÷
ø½³÷
ø·²÷
ø½³÷
ìçòé
ïîêòî
êìòï
ïêîòè
ëîòè
ïíìòï
ëêòè
ïììòí
éîòð
ïèîòç
éîòð
ïèîòç
ííòð
èíòè
ííòð
èíòè
îòð
ëòï
îòð
ëòï
ïòï
îòè
ïòï
îòè
ëîòð
ïíîòï
êêòì
ïêèòé
ðòì
ïòð
ðòì
ïòð
ööÎ»º»® ¬± ÝÝöö ·² -¬¿²¼ ½¸¿®¬ ¬± ¬¸» ®·¹¸¬ò
ê
ÍÌßÒÜÍ
ßß
íèòè
çèòê
ÕÕ
êòë
ïêòë
Òñß
Òñß
ÓÑÜÛÔ
Þóêëðñ
Þóïððð
Óö
ØÛ×ÙØÌ ÝÝöö
ø·²÷
ø½³÷
ïìëòí
íêçòï
ëíòð
ïíìòê
ø·²÷
ø½³÷
ïêìòí
ìïéòí
éîòð
ïèîòç
Þóêëðô Þóïðððô Þóîððð ú Þóíððð Ø±®·¦±²¬¿´ Ó±¼»´ Ü·³»²-·±²ÙÝóÑØ
ÝÛóÑØ
Ü
ÚÚ
Û
Ø
Ñß ÙÙ ßß
Ê
Ë
Ú
ÌÜ ±® ÞÜ
Ù
ß
ÐÔßÒ
Ê×ÛÉ
ÛÜ Ü Ò Ð
Í×ÜÛ
Ê×ÛÉ
ÛÜ
Ý
Îß
Ú
Ø
ÚÚ
ØØ
ÝÛ
Ö
Ú·´¬»® ß½½»-Ç
É
Æ
×ÒÔÛÌ ØÑÑÜ
ÙÝ
Þ
Ô·º¬·²¹ Ô«¹
øÑ²» Û¿½¸ Ý±®²»®÷
Ú·´¬»® ß½½»-- Í
ÌÜ
ÜÜ
ÞÞ
ÝÛ
Ñß
ÙÝ
ÛÛ
Îß
Î
Í«°°±®¬ Þ®¿½»
ÓÑÜÛÔ
ß×Î
ØßÒÜÔÛÎ
ÍÕ×Ü
Þóêëðñ
Þóïððð
ø´¾÷
øµ¹÷
éððòð
íïéòë
ïìðòð
êíòë
Þóîððð
ø´¾÷
øµ¹÷
ïôìððòð
êíèòð
íìðòð
ïëìòî
Þóíððð
ø´¾÷
øµ¹÷
ïôêëðòð
éìèòì
íêëòð
ïêëòê
ÞÜ
Ì
Ï
Í¸·°°·²¹ ©»·¹¸¬- ¿°°´§ ¬± ¾±¬¸ ¸±®·¦±²¬¿´ ¿²¼ «°®·¹¸¬ ³±¼»´-ò
ß´´ ¼·³»²-·±²- ¿²¼ ©»·¹¸¬- ¿®» -«¾¶»½¬ ¬± ½¸¿²¹» ©·¬¸±«¬ ²±¬·½»ò
Ñ«¬¼±±® ¿·® ¼«½¬ -·¦» ª¿®·»-ò Ý±²-«´¬ º¿½¬±®§ò
-»½¬·±² ¿²¼ ·²´»¬ ¸±±¼ ¿®» ®»¯«·®»¼ò Í«°°±®¬ ¾®¿½» °®±ª·¼»¼ ¾§
º¿½¬±®§ò
Ý±²¬®±´ »²½´±-«®» ·- ´±½¿¬»¼ ±² ¬¸» ®·¹¸¬ -·¼» ±º ¬¸» ¿·® ¸¿²¼´»®
©¸»² ´±±µ·²¹ ¼±©²-¬®»¿³ ·²¬± ¬¸» ·²´»¬ »²¼ò
ÔÛÙÛÒÜ
ÞÜ ã Þ±¬¬±³ Ü·-½¸¿®¹»
ÝÛ ã Ý±²¬®±´ Û²½´±-«®»
ÙÝ ã Ù¿- Ý±²²»½¬·±²
ÛÜ ã Û²¼ Ü·-½¸¿®¹»
ÔÜ ã Ô»º¬ Ü·-½¸¿®¹»
Ñß ã Ñ«¬-·¼» ß·®
Îß ã Î»¬«®² ß·® øÑ°¬·±²¿´÷
ÎÜ ã Î·¹¸¬ Ü·-½¸¿®¹»
ÌÜ ã Ì±° Ü·-½¸¿®¹»
ÑØ ã Ñ°°±-·¬» Ø¿²¼
é
Þóìððð ú Þóëððð Ë°®·¹¸¬ Ó±¼»´ Ü·³»²-·±²ÛÜ
ÛÜ
ÖÖ
Ý
Ç
ÚÚ
ÙÙ
Ü
Ú
ÞÞ
ÔÜóÑØ
±®
ÎÜóÑØ
ÔÜ
±®
ÎÜ
ÝÝ
ÔÜ ß
ÎÜ
ÎßóÑØ
Ð
Ö
Æ
Îß
ÝÛ
ÜÜ
Îß
ÞÞ
Ú·´¬»®
ß½½»--
Ñß
ÔÛÙÍ
Ñß
Ú·´¬»®
ß½½»--
ÛÒÜ Ê×ÛÉ
Í×ÜÛ Ê×ÛÉ
ÓÑÜÛÔ
ß
Ý
Ú
Ö
Ó
Ð
Ê
É
È
Ç
Æ
ÞÞ
ÝÝ
ÜÜ
ÖÖ
Þóìððð
ø·²÷
ø½³÷
ìðòê
ïðíòï
íïòë
èðòð
ïîòì
íïòë
íïòê
èðòí
êðòí
ïëíòð
ëòè
ïìòé
èêòð
îïèòì
ïíèòè
íëîòê
íìòð
èêòì
ïêðòð
ìðêòì
ïîîòë
íïïòî
ëòð
ïîòé
ïððòï
îëìòí
îèòê
éîòê
ëèòð
ïìéòí
Þóëððð
ø·²÷
ø½³÷
ìêòí
ïïéòê
íëòí
èçòé
êòë
ïêòë
íïòê
èðòí
êðòí
ïëíòð
ëòè
ïìòé
èêòð
îïèòì
ïíèòè
íëîòê
íìòð
èêòì
ïêðòð
ìðêòì
ïîîòë
íïïòî
ëòð
ïîòé
ïððòï
îëìòí
îèòê
éîòê
ëèòð
ïìéòí
ÞÑÌÌÑÓ Ü×ÍÝØßÎÙÛ
ÓÑÜÛÔ
Þóìððð
Þóëððð
è
ø·²÷
ø½³÷
ø·²÷
ø½³÷
Ü
ìéòê
ïîðòç
ìîòð
ïðêòé
ÚÚ
îíòè
êðòë
ïèòî
ìêòî
ÙÙ
èèòí
îîìòí
ççòï
îëïòé
ÛÒÜñÌÑÐ Ü×ÍÝØßÎÙÛ
Ü
ìéòç
ïîïòé
ìîòì
ïðéòé
ÚÚ
îìòï
êïòî
ïèòé
ìéòë
ÙÙ
èéòè
îîíòð
çèòê
îëðòì
ÓÑÜÛÔ
ÜÚéððß
ÜÚéððÞ
ø´¾÷
øµ¹÷
ø´¾÷
øµ¹÷
ß×Î ØßÒÜÔÛÎ
íôíëðòð
ïôëîðòð
íôèððòð
ïôéîíòé
Þóìððð ú Þóëððð Ø±®·¦±²¬¿´ Ó±¼»´ Ü·³»²-·±²Ê
È
ÝÝ
ÞÞ
ÜÜ
Ð
ÝÛóÑØ
Îß
ÚÚ
ÞÜ
±®
ÌÜ
ÙÙ
Ñß
ÛÜ
ÐÔßÒ
Ê×ÛÉ
ÖÖ Ó ÛÜ
Í×ÜÛ
Ê×ÛÉ
Ç
Æ
É
ÞÜóÑØ
±®
ÌÜóÑØ
ÎßóÑØ
Ö
Ú·´¬»® ß½½»--
×ÒÔÛÌ ØÑÑÜ
Ü
ÝÛ
ÌÜ
ß
Ú·´¬»® ß½½»--
ÞÞ
Ú
Ý
Ñß
Îß
ÔÛÙÛÒÜ
ÞÜ ã Þ±¬¬±³ Ü·-½¸¿®¹»
ÝÛ ã Ý±²¬®±´ Û²½´±-«®»
ÙÝ ã Ù¿- Ý±²²»½¬·±²
ÛÜ ã Û²¼ Ü·-½¸¿®¹»
ÔÜ ã Ô»º¬ Ü·-½¸¿®¹»
Ñß ã Ñ«¬-·¼» ß·®
Îß ã Î»¬«®² ß·® øÑ°¬·±²¿´÷
ÎÜ ã Î·¹¸¬ Ü·-½¸¿®¹»
ÌÜ ã Ì±° Ü·-½¸¿®¹»
ÑØ ã Ñ°°±-·¬» Ø¿²¼
ÞÜ
Í¸·°°·²¹ ©»·¹¸¬- ¿°°´§ ¬± ¾±¬¸ ¸±®·¦±²¬¿´ ¿²¼ «°®·¹¸¬ ³±¼»´-ò
ß´´ ¼·³»²-·±²- ¿²¼ ©»·¹¸¬- ¿®» -«¾¶»½¬ ¬± ½¸¿²¹» ©·¬¸±«¬ ²±¬·½»ò
Ñ«¬¼±±® ¿·® ¼«½¬ -·¦» ª¿®·»-ò Ý±²-«´¬ º¿½¬±®§ò
-»½¬·±² ¿²¼ ·²´»¬ ¸±±¼ ¿®» ®»¯«·®»¼ò Í«°°±®¬ ¾®¿½» °®±ª·¼»¼ ¾§
º¿½¬±®§ò
Ý±²¬®±´ »²½´±-«®» ·- ´±½¿¬»¼ ±² ¬¸» ®·¹¸¬ -·¼» ±º ¬¸» ¿·® ¸¿²¼´»®
©¸»² ´±±µ·²¹ ¼±©²-¬®»¿³ ·²¬± ¬¸» ·²´»¬ »²¼ò
ç
Ú·´¬»® Í»½¬·±²Þóíëð Ú×ÔÌÛÎ ÍÛÝÌ×ÑÒ
ÞóêëðñÞóïððð Ú×ÔÌÛÎ ÍÛÝÌ×ÑÒ
×²´»¬
×²´»¬
Ú·´¬»® ß½½»-- Ü±±®
Þ
Ý
Ù
ß
Ø
Ú·´¬»® ¿½½»-- ¬¸®±«¹¸
-·¼» ¿½½»-- ¼±±®ò
×²´»¬
Ú·´¬»®
Ú
Ü
Û
Ú
Ý
ß
Þ
Í×ÜÛ Ê×ÛÉ
ÐÔßÒ Ê×ÛÉ
ÞóìðððñÞóëððð Ú×ÔÌÛÎ ÍÛÝÌ×ÑÒ
ÞóîðððñÞóíððð Ú×ÔÌÛÎ ÍÛÝÌ×ÑÒ
Ø·²¹»¼ Ú·´¬»®
ß½½»-- Ü±±®
Ý
Ú
Þ
Ý
ß·®º´±©
ËÐÎ×ÙØÌ
×²´»¬
Ý
ß
×²´»¬
Ü Û
Ý
ß Þ
Þ
ØÑÎ×ÆÑÒÌßÔ
Ù
Ú
Í×ÜÛ Ê×ÛÉ
Ø
Ø·²¹»¼ Ú·´¬»®
ß½½»-- Ü±±®
Ý
ß
ß·®º´±©
ÐÔßÒ Ê×ÛÉ
Ú×ÔÌÛÎÍ
ÓÑÜÛÔ
ß
Þ
Ý
Ü
Û
Ú
Ü×ÍÐÑÍßÞÔÛ ÉÛ×ÙØÌ
ÐÑÔÇÛÍÌÛÎ
ÐÛÎÓßÒÛÒÌ
ßÔËÓ×ÒËÓ ÓÛÍØ
Ù
Ø
Í×ÆÛ
ÏÌÇ
Í×ÆÛ
ÏÌÇ
´¾-
µ¹
Þóíëð
ø·²÷ îèòí îéòð íîòí
Òñß
ø½³÷ éïòç êèòê èîòï
Òñß Òñß Òñß Òñß
îð ¨ îë ¨ î
ëðòè ¨ êíòë ¨ ëòï
î
îð ¨ ëð ¨ ï
ëðòè ¨ ïîé ¨ îòë
ï
ïððòð ìëòì
ÞóêëðñÞóïððð
ø·²÷ íèòè ìíòì îòí îèòè íîòé ïòç íìòð ðòë
ø½³÷ çèòê ïïðòî ëòç éíòî èíòï ìòç èêòí ïòí
îð ¨ îð ¨ ï
ëðòè ¨ ëðòè ¨ îòë
è
îð ¨ ìð ¨ ï
ëðòè ¨ ïðïòê ¨ îòë
ì
ïððòð ìëòì
Þóîððð
ø·²÷ ìçòé ëëòé íòð ëîòè ëëòé ïòì íïòð ðòì
ø½³÷ ïîêòî ïìïòë éòê ïíìòï ïìïòë íòê éèòé ïòð
îð ¨ îë ¨ ï
ëðòè ¨ êíòë ¨ îòë
ïî
îð ¨ ëð ¨ ï
ëðòè ¨ ïîé ¨ îòë
ê
îîðòð ççòè
Þóíððð
ø·²÷ êìòï êèòí îòï ëêòè êðòé ïòç íïòð ðòì
îð ¨ îð ¨ ï ú îð ¨ îë ¨ ï
ïê ú è
îð ¨ êð ¨ ï
ø½³÷ ïêîòè ïéíòë ëòí ïììòí ïëìòî ìòè éèòé ïòð ëðòè ¨ ëðòè ¨ îòë ú ëðòè ¨ êíòë ¨ îòë ïê ú è ëðòè ¨ ïëîòì ¨ îòë
è
îéðòð ïîîòë
ÞóìðððñÞóëððð
ËÐÎ×ÙØÌ
ø·²÷ ïìíòð ëíòê íìòç
Òñß
ø½³÷ íêíòî ïíêòï èèòê
îð ¨ îð ¨ ï
ëê
îð ¨ ïìð ¨ ï
ëðòè ¨ íëëòê ¨ îòë
è
ëëðòð îìçòë
ØÑÎ×ÆÑÒÌßÔ
ø·²÷ ïíèòè ëéòç íìòð
Òñß
ø½³÷ íëîòê ïìéòï èêòì
îð ¨ îð ¨ ï
ëê
îð ¨ ïìð ¨ ï
ëðòè ¨ íëëòê ¨ îòë
è
ëèðòð îêíòï
ïð
×²´»¬ Ø±±¼Þóíëð ×ÒÔÛÌ ØÑÑÜ
Õ
ÞóìðððñÞóëððð ×ÒÔÛÌ ØÑÑÜ
Ñß
Ø Ö
Õ
ÐÔßÒ Ê×ÛÉ
Ù
Ñß
ß
Þ
ß
Ý
Û Ü
Ñß
Í×ÜÛ Ê×ÛÉ
Ú
ÐÔßÒ Ê×ÛÉ
Þóêëð ó Þóíððð ×ÒÔÛÌ ØÑÑÜÕ
Ö
Þ
Ñß
ÙØ
Ý
Ö
Ú
ÐÔßÒ Ê×ÛÉ
Í½®»»² Ó»-¸ Ô±½¿¬·±²
øÑ°¬·±²¿´÷
Í×ÜÛ Ê×ÛÉ
Õ
ß
Ú·´¬»® Î¿·´
Ó±·-¬«®»
Ô·³·¬»® Î¿·´
øÑ°¬·±²¿´÷
Í½®»»² Ó»-¸ Ô±½¿¬·±²
øÑ°¬·±²¿´÷
×²´»¬ ¸±±¼ ·- ¿´-± ¿ª¿·´¿¾´» ©·¬¸ -½®»»² ³»-¸ô
Û Ü
×²´»¬ ª¿®·¿¬·±² ±º -½®»»² ³»-¸ ©·¬¸±«¬
Ñß
±º Þóìððð ¿²¼ Þóëððð ø´»-- ïîð ´¾-ñëì µ¹ ¬±
Ú·´¬»® Î¿·´
Þ
Ý
ÓÑÜÛÔ
Ñß
Ó±·-¬«®» Ô·³·¬»® Î¿·´
øÑ°¬·±²¿´÷
Í×ÜÛ Ê×ÛÉ
×ÒÔÛÌ ÊßÎ×ßÌ×ÑÒÍ øÍÛÛ ÒÑÌÛÍ÷
ÐÛÎÓßÒÛÒÌ
ÓÑ×ÍÌËÎÛ
ßÔËÓ×ÒËÓ ÓÛÍØ
Ô×Ó×ÌÛÎ
Ú×ÔÌÛÎÍ
×ÒÔÛÌ ØÑÑÜ Ü×ÓÛÒÍ×ÑÒÍ
Þóîððð
ø·²÷ èçòí
ø½³÷ îîêòè
Þóíððð
ø·²÷ èêòç
ø½³÷ îîðòé
Þìðððñ
Þóëððð
ø·²÷ ïíéòë
ø½³÷ íìçòí
íïòç
èïòð
ïòì
íòê
Ù
ðòç
îòí
ìíòð
ïðçòð
Ø
îçòî
éìòî
íèòç
çèòè
Ö
Õ
îëòð îòï
êíòë ëòí
î
îð ¨ îð ¨ ï
ê
ïïðòð ìçòç
îð ¨ îë ¨ ï
ïòí
ëòð
ëîòè ëëòí ïòí ëîòï ìçòé ïòî ïòï
ïð
ïçðòð èêòî
íòí
ïîòé ïíìòï ïìðòë íòí ïíîòí ïîêòî íòð îòè ëðòè ¨ êíòë ¨ îòë
îð ¨ îð ¨ ï ú
ïð ú ë
îð ¨ îë ¨ ï
ïòí
ìòé
ëêòè ëçòí ïòí êêòè êìòï ïòí ïòï
îìðòð ïðèòç
íòí
ïïòç ïììòí ïëðòê íòí ïêçòé ïêîòè íòí îòè ëðòè ¨ ëðòè ¨ îòë ú
ïð ú ë
ëðòè ¨ êíòë ¨ îòë
èêòð ëèòð
îì ¨ îì ¨ î
Òñß
Òñß Òñß Òñß
Òñß Òñß Òñß
îì
êððòð îéîòî
îïèòì ïìéòí
êïòð ¨ êïòð ¨ ëòï
îçòð
éíòé
Ú
éòí
ïèòë
îð ¨ îë ¨ î
ëðòè ¨ êíòë ¨ ëòï
ø·²÷ ëêòì
ø½³÷ ïìíòî
ìòí
ïðòç
Û
îéòí
êçòí
ÉÛ×ÙØÌ
´¾µ¹
Þêëðñ
Þóïððð
ïòë
íòè
Ü
îêòì
êéòï
ÏÌÇ
Þ
íèòì
çéòë
Þóíëð
Ý
ïòî
íòð
Í×ÆÛ
ß
ø·²÷ íéòî
ø½³÷ çìòë
îòð
ëòï
ïòï
îòè
êðòð
îéòî
Í×ÆÛ
ÏÌÇ
ÉÛ×ÙØÌ
´¾µ¹
Òñß
Òñß
Òñß
Òñß
ïî ¨ êð ¨ ëòë
íðòë ¨ ïëîòì ¨ ïìòð
í
ïîðòð
ëìòì
ïî ¨ çê ¨ ëòë
íðòë ¨ îìíòè ¨ ïìòð
ì
îïðòð
çëòí
ë
îêðòð ïïéòç
ïî
éïðòð íîîòð
ïï
Ü·-½¸¿®¹» Ø»¿¼Þóíëð ó Þóíððð ÌØÎÛÛóÉßÇ Ü×ÍÝØßÎÙÛ ØÛßÜ
ÞóìðððñÞóëððð ÑÒÛóÉßÇ Ü×ÍÝØßÎÙÛ ØÛßÜ
Ý
Ý
Û
ß
Þ
Û
Ü
Û
Ü
Þ
Ü
ß
Ü
Ü
Û
ÌØÎÛÛóÉßÇ Ü×ÍÝØßÎÙÛ ØÛßÜ
ÓÑÜÛÔ
ÑÒÛóÉßÇ Ü×ÍÝØßÎÙÛ ØÛßÜ Ü×ÓÛÒÍ×ÑÒÍ
ÉÛ×ÙØÌ
ß
Þ
Ý
Ü
Û
ø·²÷
ø½³÷
ïçòð
ìèòí
ìðòè
ïðíòë
îíòè
êðòí
îïòð
ëíòí
îòð
ëòï
ø·²÷
ø½³÷
îîòì
ëêòç
ìðòè
ïðíòë
îìòð
êïòð
ïçòì
ìçòí
îòð
ëòï
èðòð
Þóîððð
ø·²÷
ø½³÷
íïòç
èïòð
ìíòí
ïðçòç
îïòë
ëìòê
ííòç
èêòï
îòð
ëòï
ïîðòð ëìòì
Þóíððð
ø·²÷
ø½³÷
íêòç
çíòé
ìèòí
ïîîòê
îîòë
ëéòî
íêòç
çíòé
îòð
ëòï
ïêðòð éîòê
Þóíëð
ïî
´¾-
ÓÑÜÛÔ
µ¹
Þóìððð
ëðòð
îîòé
Þóëððð
íêòí
ß
Þ
Ý
Ü
ø·²÷
èéòè
íçòè
íðòð
íòð
ø½³÷
îîîòç
ïðïòï
éêòî
éòê
ø·²÷
ïðíòè
ìèòë
íðòð
îòð
ø½³÷
îêíòë
ïîíòî
éêòî
ëòï
ÉÛ×ÙØÌ
´¾-
µ¹
îïëòð çéòë
íëëòð ïêïòð
Ü·-½¸¿®¹» ¸»¿¼ ¸¿- ³¿²«¿´´§ ¿¼¶«-¬¿¾´» ¸±®·¦±²¬¿´
¾´¿¼»-ò
Í°´¿-¸ Ð´¿¬»-
Þóíëð ó Þóíððð ÍÐÔßÍØ ÐÔßÌÛ
Ü
ß
Ñß
ß·® Ø¿²¼´»®
Ø
Ù
ÞÜ
Ü
ß
Þ
ÞóìðððñÞóëððð ÍÐÔßÍØ ÐÔßÌÛ
Ý
Í°´¿-¸
Ð´¿¬»
Ü
Ø
Ó±¼»´- Þóíëð ó Þóíððð
Ó±¼»´- ÞóìðððñÞóëððð
ïþ øîòë ½³÷ Ü«½¬´·²»®
øÐ®±ª·¼»¼÷
Ò«¬- ¿²¼
É¿-¸»®øÐ®±ª·¼»¼ ¾§ Ñ¬¸»®-÷
Ò«¬- ¿²¼ É¿-¸»®øÐ®±ª·¼»¼ ¾§ Ñ¬¸»®-÷
Ú
ïþ øîòë ½³÷ Ü«½¬´·²»®
øÐ®±ª·¼»¼÷
ïñîþ ¨ ïí Ì¸®»¿¼»¼ ®±¼ ¿²¼ ²«¬øÐ®±ª·¼»¼ ¾§ Ñ¬¸»®-÷
Ý
Þ
Û
Û
ß
ÍÐÔßÍØ ÐÔßÌÛ Ü×ÓÛÒÍ×ÑÒÍ
ÓÑÜÛÔ
ß
Þ
Ý
Ü
Û
Ú
Ù
Ù
ø³·²÷ ø³¿¨÷
Ø
ÉÛ×ÙØÌ
´¾- µ¹
Þóíëð
ø·²÷
ø½³÷
îîòð
ëëòç
ïçòë
ìçòë
ðòç
îòî
îëòð
êíòë
ïòí
íòî
ðòê
ïòê
ïëòð
íèòï
îðòð
ëðòè
Òñß
îðòð
çòï
Þêëðñ
Þóïððð
ø·²÷
ø½³÷
ììòð
ïïïòè
ìïòë
ïðëòì
ðòç
îòî
ììòð
ïïïòè
ïòí
íòî
ðòê
ïòê
ïèòð
ìéòë
îéòð
êèòê
Òñß
ìðòð
ïèòï
ø·²÷ ëìòè
ø½³÷ ïíçòï
ø·²÷ ëìòè
ø½³÷ ïíçòï
ø·²÷
ëïòð
ø½³÷ ïîçòë
ëïòí
ïíðòî
ëïòí
ïíðòî
ïïðòì
îèðòì
ïòè
ìòì
ïòè
ìòì
íòð
éòê
ëìòè
ïíçòï
ëìòè
ïíçòï
ëëòî
ïìðòî
ïòè
ìòì
ïòè
ìòì
îòð
ëòï
ðòè
îòð
ðòè
îòð
ïòð
îòë
îëòð
êíòë
íðòð
éêòî
îëòð
êíòë
íèòð
çêòë
ìëòð
ïïìòí
íèòð
çêòë
Òñß
êðòð
îéòî
Òñß
êðòð
îéòî
ïòè
ìòê
ïéðòð ééòï
Þóîððð
Þóíððð
Þóìðððñ
Þóëððð
Þóíëð ó Þóíððð ®»¯«·®» º±«®
¬¸®»¿¼»¼ ®±¼-ò
Þóìððð ¿²¼ Þóëððð ®»¯«·®»
-·¨ ¬¸®»¿¼»¼ ®±¼-ò
ïí
Ô»¹Þóíëð ó Þóíððð ÔÛÙÍ
Ý
Þ
ÝÛ
ÝÛ
×ÒÔÛÌ
ß
×ÒÔÛÌ
Ø
ÝÛ
Ú
Ù
Û
Ù
Ù
Ü
×ÒÔÛÌ Ê×ÛÉ
Ù
Ú±«® Í«°°±®¬ Ô»¹- Î»¯«·®»¼
Î×ÙØÌ Í×ÜÛ Ê×ÛÉ
ÔÛÙ Ü×ÓÛÒÍ×ÑÒÍ
ÓÑÜÛÔ
ß
Þ
Ý
Ü
Û
Ú
Ù
Ø
ÉÛ×ÙØÌ øÛßÝØ ÔÛÙ÷
´¾-
µ¹
Þóíëð
øÍ»» Ò±¬»÷
ø·²÷
ø½³÷
îèòí
éïòç
êðòí
ïëíòî
íîòí
èîòð
íïòï
éçòð
íòï
éòç
ìêòð
ïïêòè
ïìòê
íéòï
éîòë
ïèìòî
îêòð
ïïòè
ø·²÷
ø½³÷
íîòé
èíòï
çîòí
îíìòì
ììòî
ïïîòí
êíòï
ïêðòí
ïëòð
íèòï
ìêòð
ïïêòè
ïìòê
íéòï
ééòî
ïçêòï
îêòð
ïïòè
Þóîððð
ø·²÷
ø½³÷
ëêòï
ïìîòë
ïïêòï
îçìòç
ëêòð
ïìîòî
èêòç
îîðòé
îêòè
êèòï
ìêòð
ïïêòè
ïìòê
íéòï
ïððòï
îëìòí
îêòð
ïïòè
Þóíððð
ø·²÷
ø½³÷
êðòï
ïëîòé
ïïêòï
îçìòç
êèòð
ïéîòé
çêòç
îîðòé
íèòè
çèòê
ìêòð
ïïêòè
ïìòê
íéòï
ïðìòï
îêìòì
îêòð
ïïòè
ÞóìðððñÞóëððð ÔÛÙ Ü×ÓÛÒÍ×ÑÒÍ
ÞóìðððñÞóëððð ÔÛÙÍ
ÉÛ×ÙØÌ øÛßÝØ ÔÛÙ÷
ÔÛÙ ØÛ×ÙØÌ
Ú±«® Í«°°±®¬ Ô»¹- Î»¯«·®»¼
Ô»¹ Ø»·¹¸¬
´¾-
µ¹
ø·²÷
ø½³÷
îìòð
êïòð
îêòí
ïïòç
ø·²÷
ø½³÷
íêòð
çïòì
íëòð
ïëòç
ø·²÷
ø½³÷
ìèòð
ïîïòç
ìíòè
ïçòç
ø·²÷
ø½³÷
êðòð
ïëîòì
ëíòè
îìòì
ø·²÷
ø½³÷
éîòð
ïèîòç
êîòë
îèòì
ø·²÷
ø½³÷
èìòð
îïíòì
éïòí
íîòì
ø·²÷
ø½³÷
çêòð
îìíòè
èïòí
íêòç
Þóíëð ½±²¬®±´ »²½´±-«®» ·- ´±½¿¬»¼ ±² ¬¸» ´»º¬ -·¼» ±º ¬¸»
¿·® ¸¿²¼´»® ©¸»² ´±±µ·²¹ ¼±©²-¬®»¿³ ±º ¬¸» ·²´»¬ »²¼ò
îìþ øêï ½³÷ ¿²¼ íêþ øçïòì ½³÷ ´»¹ ¸»·¹¸¬- ¿®» ²±¬ ¿ª¿·´¿¾´» º±® «°®·¹¸¬
«²·¬-ò
Í×ÜÛ Ê×ÛÉ
ÐÔßÒ Ê×ÛÉ
Þóìðððò
Þóëðððò
ïì
Í¬¿²¼Þóíëð íðþ ËÐÎ×ÙØÌ ÍÌßÒÜ
Þ
Ú
Û
Û
Û
Ü ß
Ý
Û
ÚÎÑÒÌ Ê×ÛÉ
Í×ÜÛ Ê×ÛÉ
ÐÔßÒ Ê×ÛÉ
íðþ ËÐÎ×ÙØÌ ÍÌßÒÜ Ü×ÓÛÒÍ×ÑÒÍ
ÓÑÜÛÔ
ø·²÷
ø½³÷
Þóíëð
ß
Þ
Ý
Ü
Û
Ú
îèòè
éíòð
ííòï
èìòï
íðòð
éêòî
îîòè
ëéòè
íòð
éòê
îéòï
êèòç
ÉÛ×ÙØÌ
´¾-
µ¹
éëòð
íìòð
Þóêëð ó Þóíððð ëíþñéîþ ËÐÎ×ÙØÌ ÍÌßÒÜ
Ù
Þ
Ú
Û
Ý
Û
Û
Ü ß
Û
ÚÎÑÒÌ Ê×ÛÉ
Í×ÜÛ Ê×ÛÉ
ÐÔßÒ Ê×ÛÉ
ëíþñéîþ ËÐÎ×ÙØÌ ÍÌßÒÜ Ü×ÓÛÒÍ×ÑÒÍ
ÓÑÜÛÔ
øëíþ÷
øéîþ÷
Þóîððð
Þóíððð
ø·²÷
ø½³÷
ø·²÷
ø½³÷
ø·²÷
ø½³÷
ø·²÷
ø½³÷
ß
Þ
Ý
Ü
Û
Ú
Ù
ííòè
èëòé
ííòè
èëòé
ëéòë
ïìêòï
êçòë
ïéêòë
ìëòí
ïïìòç
ìëòí
ïïìòç
ëéòë
ïìêòï
êïòè
ïëêòè
ëêòí
ïìîòç
éëòí
ïçïòï
éëòí
ïçïòï
éëòí
ïçïòï
îéòè
éðòë
îéòè
éðòë
ëïòï
ïîçòè
êíòë
ïêïòí
íòð
éòê
íòð
éòê
íòð
éòê
íòð
éòê
íçòí
ççòé
íîòë
èîòê
ëïòë
ïíðòè
ëëòè
ïìïòê
íòí
èòí
íòí
èòí
íòí
èòí
íòí
èòí
ÉÛ×ÙØÌ
´¾µ¹
ïêðòð
éîòê
ïçðòð
èêòî
îíðòð
ïðìòí
íððòð
ïíêòï
ïñìþ ¿²¹´» ·®±² ½±²-¬®«½¬·±²ò
ïë
Í«-°»²-·±² Õ·¬Þóíëð ÍËÍÐÛÒÍ×ÑÒ Õ×Ì
ïñîþ ¨ ïí Ì¸®»¿¼»¼ ®±¼ ¿²¼ ²«¬øÐ®±ª·¼»¼ ¾§ Ñ¬¸»®-÷
Í«-°»²-·±² Û²¼
Í«-°»²-·±² Û²¼
ß
Þ
ÞóêëðñÞóïððð ÍËÍÐÛÒÍ×ÑÒ Õ×Ì
ïñîþ ¨ ïí Ì¸®»¿¼»¼ ®±¼ ¿²¼ ²«¬øÐ®±ª·¼»¼ ¾§ Ñ¬¸»®-÷
Í«-°»²-·±² Û²¼
Í«-°»²-·±² Í·¼»Ù¿-µ»¬ Ì¿°»
øÐ®±ª·¼»¼ ¾§ Ñ¬¸»®-÷
Þ
Í·²¹´» Ò«¬
øÐ®±ª·¼»¼ ¾§ Ñ¬¸»®-÷
Í«-°»²-·±² Û²¼
Û
Ý
øÝ»²¬»® Ô·²»÷
Þ
Ò«¬- ¿²¼ Þ±´¬øÐ®±ª·¼»¼÷
Ü±«¾´» Ò«¬øÐ®±ª·¼»¼ ¾§ Ñ¬¸»®-÷
Ü
ß
Û
Þ
Û
Û
ß
ÍËÍÐÛÒÍ×ÑÒ Õ×Ì Ü×ÓÛÒÍ×ÑÒÍ
ÓÑÜÛÔ
Þóíëð
ïê
ø·²÷
ø½³÷
ø·²÷
ø½³÷
ß
Þ
ëçòí
éíòð
ìèòð
ïîïòç
íêòë
èìòï
ìêòð
ïïêòè
Ý
Ü
Û
Òñß
Òñß
çðòð
îîèòê
ìîòð
ïðêòé
ÉÛ×ÙØÌ
´¾-
µ¹
Òñß
ïíòð
ëòç
ïòð
îòë
ïìðòð
êíòë
Î±±º Ý«®¾Þóíëð ó Þóëððð ÎÑÑÚ ÝËÎÞ
ß
Ü
Ý
Þ
Ü
Ý¿«´µ ®»¯«·®»¼ º±® ±«¬-·¼» °»®·³»¬»®
±º ®±±º ½«®¾ ¿¬ ¾±´¬»¼ ¶±·²¬-ò
Í»¿³
ïçþ øëð ½³÷
ïòëþ øíòè ½³÷
íþ øéòê ½³÷
Û²¼ °·»½» ¬±° º´¿²¹» ·- º´«-¸
©·¬¸ -·¼» ¬±° º´¿²¹»ò
Û²¼ Ð¿²»´
ø×²´»¬ ±® ¼·-½¸¿®¹»÷
Ì±° Ó±«²¬·²¹
Ú´¿²¹»
Í·¼» Ð¿²»´
Þ®¿½µ»¬- ³±«²¬ ¬± ¬¸»
±«¬-·¼» ±º ¬¸» °¿²»´-ò
ÎÑÑÚ ÝËÎÞ Ü×ÓÛÒÍ×ÑÒÍ
ÓÑÜÛÔ
ß
Þ
Ý
Ü
Þóíëð
ø·²÷
ø½³÷
îéòð
êèòê
ëéòë
ïìêòï
îèòè
éíòî
ø·²÷
ø½³÷
ìîòð
ïðêòé
èèòð
îîíòë
Þóîððð
ø·²÷
ø½³÷
ëíòð
ïíìòê
Þóíððð
ø·²÷
ø½³÷
ø·²÷
ø½³÷
ÉÛ×ÙØÌ
´¾-
µ¹
Òñß
éëòð
íìòð
íèòè
çèòê
Òñß
ïïðòð
ìçòç
ïïíòð
îèéòð
ìçòè
ïîêòë
ëêòë
ïìíòë
ïëðòð
êèòð
êëòð
ïêëòï
ïïíòð
îèéòð
êïòè
ïëéòð
ëêòë
ïìíòë
ïêðòð
éîòê
çèòð
îìèòç
ïëéòé
ìððòé
çìòè
îìðòè
éèòè
îððòí
îêéòð
ïîïòï
Ý«®¾ ·- -¸·°°»¼ «²¿--»³¾´»¼ò
ß´´ ¼·³»²-·±²- ¿®» º®±³ ¬¸» ±«¬-·¼»ò
Ý«®¾ ³¿¬»®·¿´ ·- ïê ¹¿«¹» ¹¿´ª¿²·¦»¼ -¬»»´ º±® Þóíëð ó Þóíððð ¿²¼
ïì ¹¿«¹» ¹¿´ª¿²·¦»¼ -¬»»´ º±® Þóìððð ¿²¼ Þóëðððò
Ò«¬- ¿²¼ ¾±´¬- øíñèþ ¨ ïþ÷ ¿®» º«®²·-¸»¼ò
Ý¿«´µ ¿´´ ¶±·²¬- ¾»º±®» ¿--»³¾´·²¹ò øÝ¿«´µ °®±ª·¼»¼ ¾§ ±¬¸»®-÷ò
Þóîððð ó Þóëððð ¸¿ª» -»¿³ ·² ®±±º ½«®¾ò
©·¼¬¸ ±² ¾±¬¸ -·¼»-ò
ïé
×²´»¬ Ü¿³°»®Þóíëð ó Þóïððð ÓÑÌÑÎ×ÆÛÜ ×ÒÔÛÌ ÜßÓÐÛÎ
ß
Þ
Ý
Ý
Ý
Û Ü
ß·®º´±©
Ý
Ù
Ú
ÞóîðððñÞóíððð ÓÑÌÑÎ×ÆÛÜ ×ÒÔÛÌ ÜßÓÐÛÎ
ß
Ý
Û
Û
ß·®º´±©
Ë°°»® Ü¿³°»®
Þ
ß
Ý
Û
Û
Û
ß·®º´±©
ÓÑÜÛÔ
Ü
Ô±©»® Ü¿³°»®
Þóîððð
Þóíððð
Û
ÜßÓÐÛÎ
ËÐÐÛÎ
ÉÛ×ÙØÌö
´¾-
µ¹
íìòð
ïëòì
ÔÑÉÛÎ
ìïòð
ïèòê
ËÐÐÛÎ
ìêòð
îðòç
ÔÑÉÛÎ
êïòð
îéòé
ÓÑÌÑÎ×ÆÛÜ ×ÒÔÛÌ ÜßÓÐÛÎ Ü×ÓÛÒÍ×ÑÒÍ
ÓÑÜÛÔ
Þóíëð
Þóêëðñ
Þóïððð
Þóîððð
Þóíððð
ø·²÷
ø½³÷
ø·²÷
ø½³÷
ø·²÷
ø½³÷
ø·²÷
ø½³÷
ß
Þ
Ý
Ü
Û
Ú
Ù
îïòð
ëíòí
ííòí
èìòë
ìéòí
ïîðòð
ëçòí
ïëðòê
ïçòð
ìèòí
íðòè
éèòï
îìòì
êíòð
îìòì
êíòð
ïòí
íòí
ïòí
íòî
îòð
ëòï
îòð
ëòï
îëòé
êëòî
îçòð
éíòé
îçòë
éìòç
ííòë
èëòï
îíòì
ëçòë
îêòí
êêòé
ïòë
íòè
ïòë
íòè
ëòð
ïîòé
ëòð
ïîòé
íòí
èòí
íòí
èòí
Òñß
Òñß
öÎ»º»® ¬± ½¸¿®¬ ¿¾±ª» º±® ÜÚîéð ¿²¼ ÜÚìïð ©»·¹¸¬-ò
ïè
ÉÛ×ÙØÌ
´¾-
µ¹
ìðòð
ïèòï
êðòð
îéòî
Òñß
ö
ö
Òñß
ö
ö
Ü·-½¸¿®¹» Ü¿³°»®Þóíëð ó Þóíððð ÓÑÌÑÎ×ÆÛÜ Ü×ÍÝØßÎÙÛ ÜßÓÐÛÎ
ß
Þ
Ý
Ý
Ú
Ý
ß·®º´±©
Û Ü
Ý
ÓÑÌÑÎ×ÆÛÜ Ü×ÍÝØßÎÙÛ ÜßÓÐÛÎ Ü×ÓÛÒÍ×ÑÒÍ
ÓÑÜÛÔ
Þóíëð
Þóêëðñ
Þóïððð
Þóîððð
Þóíððð
ß
Þ
Ý
Ü
Û
Ú
ø·²÷
ø½³÷
îïòð
ëíòí
ïçòð
ìèòí
ïòð
îòë
ïçòð
ìèòí
ïéòð
ìíòî
çòð
îîòç
ø·²÷
ø½³÷
ø·²÷
ø½³÷
ø·²÷
ø½³÷
îéòð
êèòê
íéòð
çìòð
ìîòð
ïðêòé
îëòð
êíòë
íìòð
èêòì
íçòð
ççòï
ïòð
îòë
ïòë
íòè
ïòë
íòè
îíòë
ëçòé
íêòð
ìîòð
ìîòð
ïðêòé
îïòë
ëìòê
ííòð
èíòè
íçòð
ççòï
èòð
îðòí
ïðòð
îëòì
ïðòð
îëòì
ÉÛ×ÙØÌ
´¾-
µ¹
ìðòð
ïèòï
êðòð
îéòî
ïððòð
ìëòì
ïëðòð
êèòð
Ò«³¾»® ±º ´±«ª»®- ©·´´ ª¿®§ ¾§ ³±¼»´ò
×²´»¬ ¼¿³°»®- ¿®» ³±«²¬»¼ «°-¬®»¿³ ±º ¬¸» ¿·® ¸¿²¼´»®ô
¼·®»½¬´§ ¬± ¬¸» ¿·® ¸¿²¼´»®ò
×²´»¬ ¼¿³°»®- ¿´-± ¿ª¿·´¿¾´» ¬± -¸·° ´±±-»ò
×²´»¬ ¼¿³°»®- º±® ÓËß -¬§´» «-» ¾±¬¸ ¬¸» «°°»® ¿²¼ ´±©»® ¼¿³°»®- º±®
Þóîððð ¿²¼ Þóíðððò
×²´»¬ ¼¿³°»®- º±® ÚÎô ßÓô ÍÝô ÍÝî ¿²¼ ÊßÊ -¬§´»- ±²´§ «-» ¬¸» «°°»®
¼¿³°»® º±® Þóîððð ¿²¼ Þóíðððò
Ü·-½¸¿®¹» ¼¿³°»®- ¼± ²±¬ ³±«²¬ ¼·®»½¬´§ ¬± ¬¸» ¿·® ¸¿²¼´»®å ¬¸»§ ³±«²¬
¼±©²-¬®»¿³ ±º ¬¸» ¿·® ¸¿²¼´»® ·² ¼«½¬©±®µò
ïç
Í»®ª·½» Ð´¿¬º±®³
ÞóìðððñÞóëððð ÍÛÎÊ×ÝÛ ÐÔßÌÚÑÎÓ
ß·® Ø¿²¼´»®
Þ
Ý
ß
Ô»¹- øÐ®±ª·¼»¼ ¾§ Ñ¬¸»®-÷
Ô¿¼¼»® øÐ®±ª·¼»¼ ¾§ Ñ¬¸»®-÷
ÍÛÎÊ×ÝÛ ÐÔßÌÚÑÎÓ Ü×ÓÛÒÍ×ÑÒÍ
ÓÑÜÛÔ
ø·²÷
ø½³÷
ß
Þ
Ý
ëéòð
ïììòè
ìçòð
ïîìòë
ìíòð
ïðçòî
ÉÛ×ÙØÌ
´¾-
µ¹
íîëòð
ïìéòð
×²-¬¿´´¿¬·±² Ý±¼» ¿²¼ ß²²«¿´ ×²-°»½¬·±²-æ
ß´´ ·²-¬¿´´¿¬·±² ¿²¼ -»®ª·½» ±º ÞßÒßÒÆß r
-»®ª·½» ±º »¯«·°³»²¬ -±´¼ ¿²¼ -«°°´·»¼ ¾§ Þ¿²¿²¦¿ ¿²¼ ½±²º±®³ ¬± ¿´´ ®»¯«·®»³»²¬- -»¬ º±®¬¸ ·² ¬¸» ÞßÒßÒÆß r ³¿²«¿´- ¿²¼ ¿´´ ¿°°´·½¿¾´»
¹±ª»®²³»²¬¿´ ¿«¬¸±®·¬·»- °»®¬¿·²·²¹ ¬± ¬¸» ·²-¬¿´´¿¬·±²ô -»®ª·½» ¿²¼ ±°»®¿¬·±² ±º ¬¸» »¯«·°³»²¬ò Ì± ¸»´° º¿½·´·¬¿¬» ±°¬·³«³ °»®º±®³¿²½» ¿²¼
r
»¯«·°³»²¬ ¿²¼
°»®º±®³ -»®ª·½» ©¸»®» ²»½»--¿®§ô «-·²¹ ±²´§ ®»°´¿½»³»²¬ °¿®¬- -±´¼ ¿²¼ -«°°´·»¼ ¾§ Þ¿²¿²¦¿ò
Ú«®¬¸»® ×²º±®³¿¬·±²æ ß°°´·½¿¬·±²-ô »²¹·²»»®·²¹ ¿²¼ ¼»¬¿·´»¼ ¹«·¼¿²½» ±² -§-¬»³- ¼»-·¹²ô ·²-¬¿´´¿¬·±² ¿²¼ »¯«·°³»²¬ °»®º±®³¿²½» ·¿ª¿·´¿¾´» ¬¸®±«¹¸ ÞßÒßÒÆß r ®»°®»-»²¬¿¬·ª»-ò Ð´»¿-» ½±²¬¿½¬ «- º±® ¿²§ º«®¬¸»® ·²º±®³¿¬·±² §±« ³¿§ ®»¯«·®»ô ·²½´«¼·²¹ ¬¸»
×²-¬¿´´¿¬·±²ô Ñ°»®¿¬·±² ¿²¼ Í»®ª·½» Ó¿²«¿´ò
Ì¸·- °®±¼«½¬ ·- ²±¬ º±® ®»-·¼»²¬·¿´ «-»ò
Ì¸·- ¼±½«³»²¬ ·- ·²¬»²¼»¼ ¬± ¿--·-¬ ´·½»²-»¼ °®±º»--·±²¿´- ·² ¬¸» »¨»®½·-» ±º ¬¸»·® °®±º»--·±²¿´ ¶«¼¹³»²¬ò
Þ¿²¿²¦¿
ïïðð Í»ª»² Ó·´» Î±¿¼ ÒÉ
Ý±³-¬±½µ Ð¿®µô Ó× ìçíîï
Ì»´»°¸±²»æ õïòêïêòéîêòèèðð
Ì±´´ Ú®»»æ èððòîëëòíìïê
Ú¿¨æ õïòêïêòéîêòèèðé
©©©ò¾¿²¿²¦¿ò½±³
w îðïð Î±¾»®¬-óÙ±®¼±² ÔÔÝ ß´´ ®·¹¸¬- ®»-»®ª»¼ò Ò± °¿®¬ ±º ¬¸·- ©±®µ ½±ª»®»¼ ¾§ ¬¸» ½±°§®·¹¸¬- ¸»®»·² ³¿§ ¾» ®»°®±¼«½»¼ ±® ½±°·»¼ ·² ¿²§ º±®³ ±®
¾§ ¿²§ ³»¿² ¹®¿°¸·½ô »´»½¬®±²·½ô ±® ³»½¸¿²·½¿´ô ·²½´«¼·²¹ °¸±¬±½±°§·²¹ô ®»½±®¼·²¹ô ¬¿°·²¹ô ±® ·²º±®³¿¬·±² ¬±®¿¹»
¿²¼ ®»¬®·»ª¿´ §¬»³ ©·¬¸±«¬ ©®·¬¬»² °»®³··±² ±º Î±¾»®¬óÙ±®¼±² ÔÔÝò
Ð®·²¬»¼ ·² ËòÍòßò
ÞÒîÜÍÙÒß
ïÓ ðéïð Î»ª ß
ÓËßóî
ß¬´¿- Ý±°½±
ÝÑÓÐóï
Ñ·´ó·²¶»½¬»¼ Î±¬¿®§ Í½®»© Ý±³°®»--±®Ùß íðõóçðñÙß íéóçð ÊÍÜ øíðóçð µÉñìðóïîë ¸°÷
Ìóï
Xtreme Airless Sprayers
®
The Latest in High-Performance, High-Pressure Technology
Xtreme Sprayers with NXT Technology
®
Discover the Next Generation of Xtreme Power and Performance
NXT Air Motor Technology lasts up to 10 times longer!
We’ve taken the best and made it even better. With the Xtreme NXT, you get a new airless sprayer that sets a higher standard for long-lasting durability. In
fact, the NXT Air Motor is proven to last 10 times longer than its predecessor, the Graco King.™ Built to handle the toughest protective coatings and corrosion
control applications, the Xtreme NXT also provides easy access to the modular air valve, a de-icing feature and reduced noise. And with more models and
configurations to choose from, you get the precise pressure and output you need for your high performance coatings spraying applications.
DataTrak Control
™
NXT Air Motor
•Modular design for
easier maintenance
• Rugged body armor
won’t rust or dent
• Runaway protection
• Pump diagnostics
• Material usage
• Optional accessory
• Highest technology air
motor on the market
Modular Air Valve
•De-ice control reduces icing
•Up to 50% quieter than
previous models
• Modular air valve
-Reduces stalling
-Easy-to-repair
Quick Disconnect
•Makes for easier service
Graco Xtreme Pump Lower
with Built-In Filter
•Lower cost of ownership
• Longer-lasting rod
with Chromex™ coating
• Quick knockdown
2
The Rules Have Changed
Raising the Bar for High-Performance Airless Spraying
Reliability. Durability. More Choices.
Less pulsation for better results
Xtreme Sprayers… choose the package that fits your
demanding spraying applications.
Xtreme NXT technology provides a smooth, rapid
changeover for a better, more consistent finish
and less user fatigue.
A
B
XTREME WITH
NXT TECHNOLOGY
C
D
Xtreme Sprayer with
Lightweight Cart
Xtreme Sprayer with
Hopper Feed Kit
and Heavy-Duty Cart
0
200
400
600
TIME (milliseconds)
A Less than
1
⁄15 of a second changeover!
Quick changeover and recovery
B with less pulsation
C Pressure spike at changeover
D Longer changeover causing pulsation
Noise-reduction technology
The quiet, low-noise NXT air motor operates around
87 decibels, while other comparable motors operate
up to 103 dB(A).
105
100
95
LOUDER
Zinc Xtreme Package
with Circulation and
Heavy-Duty Cart
CURRENT
STANDARD
MOTORS
103 dB(A)
100 dB(A)
COMPETITOR
KING
96 dB(A)
NXT 6500
De-Ice
87 dB(A)
NXT 6500
Low-Noise
90
85
80
* All pressures 100 psi
3
Selecting the Right Xtreme Sprayer
PACKAGES
X x x x x x
Product Identifier:
X=Xtreme Sprayer
Motor Type:
D: De-icing
50:
55:
60:
70:
80:
90:
6500cc motor/250cc lower
3400cc motor / 85cc lower
COMPLETE
Package Ratio:
25: 3400cc motor/290cc lower
XTREME SPRAYER
SPECIFICATIONS
Three air motor sizes and 12 models to fit all your demanding applications
L: Low noise
Mount Type:
H: Heavy-duty cart
L: Lightweight cart
Example:
Package/DataTrak :
1: Complete package with DataTrak
X46DH2 is a 46:1,
2: Bare package with DataTrak
De-Ice, heavy-duty,
bare package with DataTrak 3: Complete package, no DataTrak
4: Bare package, no DataTrak
W: Wall-mount
Notes: Packages sold with XSeal_LTH packings only. Packages sold with built-in filter only. Complete packages sold with
XTR™ gun, 50 ft x 3/8 hose and 6 ft x 1/4 whip hose. Wall-mount packages are only available bare, but include 10 ft suction
hose with 55 gal suction tube.
BARE
5: Complete hopper package with DataTrak
6: Complete hopper package, no DataTrak
7: Complete package, no DataTrak,
no built-in fluid filter*
SPRAYERS
™
WITH HOPPER
* Only available on X45, X60 or X70 De-ice, heavy-duty or lightweight cart packages.
Product Identifier:
P=Xtreme Pump
Motor/DataTrak:
D: De-icing: None
E: De-icing: DataTrak
Example:
P70DC2 is a 70:1
De-Ice, with built-in
filter and no air control
3400cc motor / 85cc lower
L: Low noise: None
M: Low noise: DataTrak
Lower Material:
C: Carbon steel
Filter/Air Controls:
1: No built-in filter, no air controls
2: Built-in filter, no air controls
Note: Pumps sold with XSeal_LTH packings only.
4
50:
55:
60:
70:
80:
90:
3: No built-in filter, air controls
4: Built-in filter, air controls
PUMPS
Pump Ratio:
BARE
Px x xC x
WALL-MOUNT
PUMPS
X25
X30
X35
X40
X45
X46
X50
X55
X60
X70
X80
X90
Output per cycle
Motor Size
290cc
NXT 3400
220cc
NXT 3400
115cc
NXT 2200
180cc
NXT 3400
290cc
NXT 6500
145cc
NXT 3400
250cc
NXT 6500
115cc
NXT 3400
220cc
NXT 6500
180cc
NXT 6500
85cc
NXT 3400
145cc
NXT 6500
Maximum Working Pressure
psi (bar, MPa)
2375
(164, 16.4)
3150
(217, 21.7)
3800
(262, 26.2)
3800
(262, 26.2)
4550
(313, 31.3)
4750
(327, 32.7)
5200
(359, 35.9)
5950
(410, 41.0)
6000
(417, 41.7)
7250
(500, 50.0)
7250
(500, 50.0)
7250
(500, 50.0)
Maximum Air Input Pressure
psi (bar, MPa)
100
(7, 0.7)
100
(7, 0.7)
100
(7, 0.7)
100
(7, 0.7)
100
(7, 0.7)
100
(7, 0.7)
100
(7, 0.7)
100
(7, 0.7)
100
(7, 0.7)
100
(7, 0.7)
100
(7, 0.7)
80
(5.5, .55)
Maximum Free Flow Output
gpm (lpm)
13.8
(52.2)
10.0
(38)
6.0
(22.7)
8.5
(32)
13.8
(52.2)
7.5
(28)
11.3
(43)
6.0
(22.7)
10.0
(38)
8.5
(32)
4.5
(17)
7.5
(28)
Output at 60 CPM gpm (lpm)
4.6 (17)
3.4 (12.9)
2.0 (7.6)
2.9 (11)
4.6 (17)
2.3 (8.7)
4.0 (15.2)
2.0 (7.6)
3.4 (12.9)
2.9 (11)
1.5 (5.7)
2.3 (8.7)
MOTOR
TYPE
MOUNT
TYPE
DATATRAK
INCLUDED
PACKAGE
X25
X30
X35
X40
X45
X46
X50
X55
X60
X70
X80
X90
D
D
D
D
L
L
L
L
D
D
D
D
L
L
L
L
D
D
D
D
L
L
L
L
D
D
L
L
H
H
L
L
H
H
L
L
H
H
L
L
H
H
L
L
H
H
L
L
H
H
L
L
W
W
W
W
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
C
C
C
C
C
C
C
C
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
B
B
B
B
X25DH1
X25DH3
X25DL1
X25DL3
X30DH1
X30DH3
X30DL1
X30DL3
X35DH1
X35DH3
X35DL1
X35DL3
X40DH1
X40DH3
X40DL1
X40DL3
X46DH1
X46DH3
X46DL1
X46DL3
X35DH2
X35DH4
X35DL2
X35DL4
X40DH2
X40DH4
X40DL2
X40DL4
X25DH5
X25DH6
X25DL5
X25DL6
X30DH5
X30DH6
X30DL5
X30DL6
X35DH5
X35DH6
X35DL5
X35DL6
X40DH5
X40DH6
X40DL5
X40DL6
X25DW2
X25DW4
X30DW2
X30DW4
X35DW2
X35DW4
X40DW2
X40DW4
X60DH1
X60DH3
X60DL1
X60DL3
X60LH1
X60LH3
X60LL1
X60LL3
X60DH2
X60DH4
X60DL2
X60DL4
X60LH2
X60LH4
X60LL2
X60LL4
X60DH5
X60DH6
X60DL5
X60DL6
X60LH5
X60LH6
X60LL5
X60LL6
X60DW2
X60DW4
X60LW2
X60LW4
X70DH1
X70DH3
X70DL1
X70DL3
X70LH1
X70LH3
X70LL1
X70LL3
X70DH2
X70DH4
X70DL2
X70DL4
X70LH2
X70LH4
X70LL2
X70LL4
X70DH5
X70DH6
X70DL5
X70DL6
X70LH5
X70LH6
X70LL5
X70LL6
X70DW2
X70DW4
X70LW2
X70LW4
X80DH1
X80DH3
X80DL1
X80DL3
X30DH2
X30DH4
X30DL2
X30DL4
X50DH1
X50DH3
X50DL1
X50DL3
X50LH1
X50LH3
X50LL1
X50LL3
X50DH2
X50DH4
X50DL2
X50DL4
X50LH2
X50LH4
X50LL2
X50LL4
X50DH5
X50DH6
X50DL5
X50DL6
X50LH5
X50LH6
X50LL5
X50LL6
X50DW2
X50DW4
X50LW2
X50LW4
X55DH1
X55DH3
X55DL1
X55DL3
X25DH2
X25DH4
X25DL2
X25DL4
X45DH1
X45DH3
X45DL1
X45DL3
X45LH1
X45LH3
X45LL1
X45LL3
X45DH2
X45DH4
X45DL2
X45DL4
X45LH2
X45LH4
X45LL2
X45LL4
X45DH5
X45DH6
X45DL5
X45DL6
X45LH5
X45LH6
X45LL5
X45LL6
X45DW2
X45DW4
X45LW2
X45LW4
X90DH1
X90DH3
X90DL1
X90DL3
X90LH1
X90LH3
X90LL1
X90LL3
X90DH2
X90DH4
X90DL2
X90DL4
X90LH2
X90LH4
X90LL2
X90LL4
X90DH5
X90DH6
X90DL5
X90DL6
X90LH5
X90LH6
X90LL5
X90LL6
X90DW2
X90DW4
X90LW2
X90LW4
MOTOR
TYPE
BUILT-IN
FILTER
DATATRAK
INCLUDED
AIR
CONTROLS
X25
X30
X35
X40
X45
X46
X50
X55
X60
X70
X80
X90
D
D
D
D
D
D
D
D
L
L
L
L
L
L
L
L
YES
YES
YES
YES
NO
NO
NO
NO
YES
YES
YES
YES
NO
NO
NO
NO
NO
NO
YES
YES
NO
NO
YES
YES
NO
NO
YES
YES
NO
NO
YES
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
P30DC2
P30DC4
P30EC2
P30EC4
P30DC1
P30DC3
P30EC1
P30EC3
P30LC2
P30LC4
P30MC2
P30MC4
P30LC1
P30LC3
P30MC1
P30MC3
P35DC2
P35DC4
P35EC2
P35EC4
P35DC1
P35DC3
P35EC1
P35EC3
P35LC2
P35LC4
P35MC2
P35MC4
P35LC1
P35LC3
P35MC1
P35MC3
P40DC2
P40DC4
P40EC2
P40EC4
P40DC1
P40DC3
P40EC1
P40EC3
P40LC2
P40LC4
P40MC2
P40MC4
P40LC1
P40LC3
P40MC1
P40MC3
P45DC2
P45DC4
P45EC2
P45EC4
P45DC1
P45DC3
P45EC1
P45EC3
P45LC2
P45LC4
P45MC2
P45MC4
P45LC1
P45LC3
P45MC1
P45MC3
P46DC2
P46DC4
P46EC2
P46EC4
P46DC1
P46DC3
P46EC1
P46EC3
P46LC2
P46LC4
P46MC2
P46MC4
P46LC1
P46LC3
P46MC1
P46MC3
P50DC2
P50DC4
P50EC2
P50EC4
P50DC1
P50DC3
P50EC1
P50EC3
P50LC2
P50LC4
P50MC2
P50MC4
P50LC1
P50LC3
P50MC1
P50MC3
P55DC2
P55DC4
P55EC2
P55EC4
P55DC1
P55DC3
P55EC1
P55EC3
P55LC2
P55LC4
P55MC2
P55MC4
P55LC1
P55LC3
P55MC1
P55MC3
P60DC2
P60DC4
P60EC2
P60EC4
P60DC1
P60DC3
P60EC1
P60EC3
P60LC2
P60LC4
P60MC2
P60MC4
P60LC1
P60LC3
P60MC1
P60MC3
P70DC2
P70DC4
P70EC2
P70EC4
P70DC1
P70DC3
P70EC1
P70EC3
P70LC2
P70LC4
P70MC2
P70MC4
P70LC1
P70LC3
P70MC1
P70MC3
P80DC2
P80DC4
P80EC2
P80EC4
P80DC1
P80DC3
P80EC1
P80EC3
P80LC2
P80LC4
P80MC2
P80MC4
P80LC1
P80LC3
P80MC1
P80MC3
P90DC2
P90DC4
P90EC2
P90EC4
P90DC1
P90DC3
P90EC1
P90EC3
P90LC2
P90LC4
P90MC2
P90MC4
P90LC1
P90LC3
P90MC1
P90MC3
X46DH2
X46DH4
X46DL2
X46DL4
X46DH5
X46DH6
X46DL5
X46DL6
X46DW2
X46DW4
X55DH2
X55DH4
X55DL2
X55DL4
X55DH5
X55DH6
X55DL5
X55DL6
X55DW2
X55DW4
LEGEND: Motor Type: D=De-Ice, L=Low-Noise Mount Type: H=Heavy-Duty Cart, L=Lightweight Cart, W=Wall Mount Package: C=Complete Hose & Gun, B=Bare
X80DH2
X80DH4
X80DL2
X80DL4
X80DH5
X80DH6
X80DL5
X80DL6
X80DW2
X80DW4
5
Ordering Information & Accessories
To get genuine Graco accessories, see your nearest Graco Distributor, or call Graco at 877-844-7226.
NXT Package Configurations
28797840:1 with External Filter Wall Mount Package with Low Noise
NXT Air Motor with DataTrak
28797530:1 Heavy-Duty Cart AA Package (G40 Spray Gun and Hoses)
with De-Icing NXT Air Motor with DataTrak
28797640:1 Heavy-Duty Cart AA Package (G40 Spray Gun and Hoses)
28797125:1 Heavy-Duty Cart Zinc Package, no hose or gun,
with De-Icing NXT Air Motor
28797240:1 Heavy-Duty Cart Zinc Package, no hose or gun,
28797325:1 Heavy-Duty Cart Zinc Package (Silver Spray Gun 238591and Hoses)
28797440:1 Heavy-Duty Cart Zinc Package (Silver Spray Gun 238591and Hoses)
28798023:1 Dura-Flo Sprayer Package (Silver Spray Gun and Hoses)
287979
23:1 Dura-Flo Sprayer Bare with De-Icing NXT Air Motor
28798132:1 Dura-Flo Sprayer Package (Silver Spray Gun and Hoses)
XN3DH2
NXT 3400 De-Icing with DataTrak on a Bare Heavy Duty-Cart *
XN3DH4
NXT 3400 De-Icing on a Bare Heavy-Duty Cart *
XN3DL2
NXT 3400 De-Icing with DataTrak on a Bare Lightweight Cart *
XN3DL4
NXT 3400 De-Icing on a Bare Lightweight Cart *
XN6DH2
NXT 6500 De-Icing with DataTrak on a Bare Heavy-Duty Cart *
XN6DH4
NXT 6500 De-Icing on a Bare Heavy-Duty Cart *
XN6DL2
NXT 6500 De-Icing with DataTrak on a Bare Lightweight Cart *
XN6DL4
NXT 6500 De-Icing on a Bare Lightweight Cart *
247312
Cart adapter for NXT2200 Air Motor
287919
Lightweight base cart
287884Heavy-duty base cart
* Add any Xtreme Lower (Sizes 145cc-290cc) to make a Package. Includes tie rods, coupling kit and a suction hose.
Xtreme Lowers
Part #
Output per Packing
Filter
Rod
Cylinder
Rebuild Kits*
cycle (cc)
L085C1 85Xseal_LTH None 24B81915F682 24F973
L085C2 85 Xseal_LTH Built-In24B819 15F682 24F973
L085C3
85
Tuff-Stack (5)
None
24B819
15F682
262507
L085C4
85
Tuff-Stack (5)
Built-In
24B819
15F682
262507
L115C1115Xseal_LTH None 24B820 15F656 24F972
L115C2 115 Xseal_LTH Built-In24B820 15F656 24F972
L115C3
115
Tuff-Stack (5)
None
24B820
15F656
262508
L115C4
115
Tuff-Stack (5)
Built-In
24B820
15F656
262508
L145C1145Xseal_LTH None 24B821197315 24F971
L145C2 145 Xseal_LTH Built-In24B821 197315 24F971
L145C3
145
Tuff-Stack (5)
None
24B821
197315
262510
L145C4
145
Tuff-Stack (5)
Built-In
24B821
197315
262510
L180C3
180
Tuff-Stack (5)
None
24B822
197316
24F970
L180C4
180
Tuff-Stack (5)
Built-In
24B822
197316
24F970
L220C3
220
Tuff-Stack (5)
None
24B823
197317
24F968
L220C4
220
Tuff-Stack (5)
Built-In
24B823
197317
24F968
L250C3
250
Tuff-Stack (5)
None
24B824
197318
24F966
L250C4
250
Tuff-Stack (5)
Built-In
24B824
197318
24F966
L290C3
290
Tuff-Stack (5)
None
24B825
197319
24F964
L290C4
290
Tuff-Stack (5)
Built-In
24B825
197319
24F964
244849
Connection Kit. Includes tie rods and coupler to adapt
Xtreme lower to King, Senator® or Bulldog® motors
* Includes seals for both old and new series filter caps.
L x x x C x
Product Identifier:
L = Xtreme Lower
Lower Volume:
085: 85cc Xtreme
115: 115cc Xtreme
145: 145cc Xtreme
180: 180cc Xtreme
220: 220cc Xtreme
250: 250cc Xtreme
290: 290cc Xtreme
Lower Material:
C: Carbon Steel
Example:
L115C1 is a 115cc
Xtreme lower with
no built-in filter
Filter/Packings:
1: No built-in filter with Xtreme Seal (3) Leather (2)
2: Built-in filter with Xtreme Seal (3) Leather (2)
3: No built-in filter with TuffStack (5)
4: Built-in filter with TuffStack (5)
Replacement Screen Filter Elements
2-Pack 25-PackDescription
224458 238436
30 Mesh (595 micron)
224459 238438
224468 238440
Filter Support
186075 Poly filter support
179801 Carbon steel filter support
New X-Tuff Repair Kits
262789 X-Tuff Repair Kit, 85 cc lowers
Filter Cap Conversion Kit
24F975 (85-290cc lowers)
see manual 406882
™
Xtreme Seal ™ (UHMWPE/LTH). Good for abrasive
materials. Standard in new Xtreme Sprayers.
Tuff-Stack ™ (PTFE). Ideal for chemical resistance
and higher temperatures. Not ideal for abrasive
applications.
X-Tuff ™ (UHMWPE/PTFE). Good for chemical
resistance and durability in applicationons below
140°F (60°C).
Airless Guns
XTR-5 Airless Spray Gun
Maximum working pressure: 5000 psi (345 bar, 34.5 MPa)
One inch round handle, four-finger trigger, no tip
XTR500
XTR501
One inch round handle, four-finger trigger, 519 flat tip
XTR502
Oval-insulated handle, four-finger trigger, 519 XHD RAC tip
XTR503
Oval-insulated handle, two-finger trigger, 519 XHD RAC tip
XTR504
One inch round handle, four-finger trigger, 519 XHD RAC tip
XTR505
One inch round handle, two-finger trigger, 519 XHD RAC tip
6
XTR-7 Airless Spray Gun
XTR700
Round handle, four-finger trigger, no tip
XTR701
Round handle, four-finger trigger, 519 flat tip
XTR702
Oval-insulated handle, four-finger trigger, 519 XHD RAC tip
XTR703
Oval-insulated handle, two-finger trigger, 519 XHD RAC tip
XTR704
Round handle, four-finger trigger, 519 XHD RAC tip
XTR705
Round handle, two-finger trigger, 519 XHD RAC tip
XHF Airless Spray Gun
262854
XHF Gun, includes XHD 429 tip (see brochure 348891)
248834
XHF Gun Swivel
Gun Accessories
Accessories
287450
287449
287451
246294
246295
246296
Two-finger Trigger Kit
Four-finger Round Trigger Kit
Four-finger Oval Insulation Trigger Kit
10 in (254 mm) Gun Extension, 7250 psi (500 bar, 50 MPa)
Xtreme-Duty High-Pressure Hoses
H x x x x x
Hose Diameter:
25: 1/4 in (6.4 mm)
38: 3/8 in (9.5 mm)
Example:
H53850 is a 5600 psi,
3/8 in, 50 ft hose
Gun splitter, 7250 psi (500 bar, 50 MPa)
180º spray nozzle, 7/8-14 UNC-2B, 7250 psi (500 bar, 50 MPa)
Gun Repair Kit, Includes Gasket, Needle and Seat
Filter, 60 Mesh
Filter, 100 Mesh
Filter, 60 and 100 Mesh Combination
4500 psi
5600 psi
7250 psi
Choose the Right Hose for the Job
Product Identifier:
H = Hose
Pressure Rating:
4: 4500 psi
5: 5600 psi
262826
246297
248837
287032
287033
287034
Working pressure............... 4500 psi (310 bar), 5600 psi (386 bar), or 7250 psi (500 bar)
Temperature rating (all sizes)....................................................-40˚ to 180˚F (-40˚ to 82˚C)
7: 7250 psi
Chemical resistance.... Hose cover resistant to a wide variety of solvents, acids and bases
50: 1/2 in (12.7 mm)
Length:
03: 3 ft (0.9 m)
06: 6 ft (1.8 m)
10: 10 ft (3.0 m)
Weather resistance...................................Hose cover has outstanding resistance to oxygen,
ozone, sunlight and general weather conditions
Electrical properties..................................Conductive hose
25: 25 ft (7.6 m)
50: 50 ft (15.2 m)
1X: 100 ft (30.5 m)
New 3/4 - Inch Hoses
H67550
3/4 in x 50 ft (15.2 m), 6500 psi, (448 bar, 44.8 MPa)
H77550
3/4 in x 50 ft (15.2 m), 7250 psi, (500 bar, 50.0 MPa)
XHD™ RAC® SwitchTip
Graco XHD GuardXHD Tips
XHD001
For pressures up to 7250 psi (500 bar, 50.0 MPa)
XHD_ _ _
XHD005
For pressures up to 7250 psi (500 bar, 50.0 MPa); XHD003
for guns with 11/16 in thread
Use numbers in table above to complete the part number
XHD RAC housing, SST – wrench-tight for extended life
Xtreme NXT Spray Accessories
Part #
288347
255143
245132
NXT206
NXT306
NXT606
NXT107
262230
262231
NXT112
NXT102
Description
Hopper Feed Kit
Wall-Mount Bracket
Xtreme Floor-Stand Kit
DataTrak Upgrade Kit for the NXT 2200
NXT Air Motor Valve – fits all three sizes
External Air Controls for Lightweight Xtreme Package Carts
External Air Controls for Heavy-Duty Xtreme Package Carts
De-Ice Control Knob (5-Pack)
De-Ice Control Repair Kit
Part #
Description
NXT100
Replacement Poppet Valve Kit
181072
Round Suction Tube Strainer
191635
Tube Strainer
245176
Suction Kit, Replaces OEM Suction Assembly (6 ft, 1.8 m hose)
288687
Suction Kit, Wall Mount Version (10 ft, 3 m hose)
24513655 gal (200 l) suction tube extension,
245190
Inlet Ball Spring Load Kit: 145cc, 180cc
245191
Inlet Ball Spring Load Kit: 220cc, 250cc, 290cc
245127
Carbide piston ball for 145 or 180 cc lower, 3-pack
244841
Lubricator – NXT Air Motor
206995
TSL, 1 qt (0.9 L)
7
ABOUT GRACO
Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products
move, measure, control, dispense and apply a wide range of fluids and viscous materials used
in vehicle lubrication, commercial and industrial settings.
The company’s success is based on its unwavering commitment to technical excellence, world-class
manufacturing and unparalleled customer service. Working closely with qualified distributors, Graco
offers systems, products and technology that set the quality standard in a wide range of fluid handling
solutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication,
and dispensing sealants and adhesives, along with power application equipment for the contractor
industry. Graco’s ongoing investment in fluid management and control will continue to provide
innovative solutions to a diverse global market.
GRACO LOCATIONS
MAILING ADDRESS
P.O. Box 1441
Minneapolis, MN 55440-1441
Tel: 612-623-6000
Fax: 612-623-6777
AMERICAS
ASIA PACIFIC
Graco Australia Pty Ltd.
Suite 17, 2 Enterprise Drive
Bundoora, Victoria 3083
Australia
Tel: 61 3 9468 8500
Fax: 61 3 9468 8599
Graco Hong Kong Ltd.
India Liaison Office
Room 432, Augusta Point
Regus Business Centre 53
Golf Course Road
Gurgaon, Haryana
India 122001
Tel: 91 124 435 4208
Fax: 91 124 435 4001
CHINA
JAPAN
AUSTRALIA
MINNESOTA
Worldwide Headquarters
Graco Inc.
88 -11th Avenue N.E.
Minneapolis, MN 55413
EUROPE
BELGIUM
European Headquarters
Graco N.V.
Industrieterrein-Oude Bunders
Slakweidestraat 31
3630 Maasmechelen,
Belgium
Tel: 32 89 770 700
Fax: 32 89 770 777
SALES/
DISTRIBUTION/
SERVICE
INDIA
Graco Hong Kong Ltd.
Shanghai Representative Office
Room 118 1st Floor
No.2 Xin Yuan Building
No.509 Cao Bao Road
Shanghai, 200233
The People’s Republic of China
Tel: 86 21 649 50088
Fax: 86 21 649 50077
Graco K.K.
1-27-12 Hayabuchi
Tsuzuki-ku
Yokohama City, Japan 2240025
Tel: 81 45 593 7300
Fax: 81 45 593 7301
KOREA
Graco Korea Inc.
Shinhan Bank Building
4th Floor #1599
Gwanyang-Dong, Dongan-Ku,
Anyang-si, Korea 431-060
Tel: 82 31 476 9400
Fax: 82 31 476 9801
Call today for product information or to request a demonstration.
877-84GRACO
(1-877-844-7226) or visit us at www.graco.com.
Graco Inc. is registered to I.S. EN ISO 9001
North America
Customer Service
800-328-0211
Fax 877-340-6427
©2011-2013 Graco Inc. 300578 Rev. I 9/13 All written and visual data contained in this document are based on the latest product
information available at the time of publication. Graco reserves the right to make changes at any time without notice. All other brand
names or marks are used for identification purposes and are trademarks of their respective owners.

16 Lintrose Pl., Mount Pearl, NL, A1N-5K2 Tel: 709-368

Transcription

Similar documents

準備するもの

For use with Kenmore Series or Designer Series models: Kit

Pavel Tsatsouline - Beyond Bodybuilding

Loosen, discharge, and dose complex bulk solids from silo/container

Z 4 01 0 / GE