Jones Stephens Corp. • PlumBest™ • LTConnections™

Transcription

SECTION G - TOOLS.................................................... 284-310
G
283
Tools
Tub And Shower Valve Wrench Set
Element Wrench
• Zinc plated steel
• For removing heater elements
• Complete set with handle includes: 21/32” x 27/32, 29/32” x
31/32”, 1 1/32” x 1 3/32”, 1 11/32” x 1 7/16”
• Plated steel
PART NO.
J40002
J40000
J40001
J40006
J40008
DESCRIPTION
Valve wrench set
21/32” x 27/32” wrench only
1 1/32” x 1 3/32” wrench only
29/32” x 31/32” wrench only
1 11/32” x 1 7/16” wrench only
CTN/MSTR
1/20
20/100
20/100
20/100
50
Garbage Disposal Wrench
G
CTN/MSTR
50/100
25/50
Sillcock Key
• Die cast
• 5/16” and 1/4”
PART NO. DESCRIPTION
1/4” Sillcock key
J40003
5/16” Sillcock key
J40004
• 1/2” steel
• 10” long
Disposal wrench
J40025
Regular unit wrench
J36100
Heavy duty wrench
J36101
CTN/MSTR
25/50
CTN/MSTR
1/400
1/400
14 Piece Folding Hex Key Wrench Set
• Chrome plated steel case
• Fourteen fractional U.S. sizes
4-Way Key
• Plated steel
• For valve, faucet and sillcock sizes
1/4”, 9/32”, 5/16” and 11/32”
Hex key wrench set (carded)
J40015
Carded
4-way key (carded)
J40005
CTN/MSTR
50/100
CTN/MSTR
12/72
Basin Wrenches
No Hub Torque Wrench
• Automatic release at 60 in.lb.
• Built-in reversing lever
• Ratchets one way
• Chrome vanadium socket
B11010
B11012
B11011
B11013 Replacement Jaw
• Spring-hinged jaw
• Telescoping body allows for
easier use in hard-to-reach
areas
• Swivel head operates from
either right or left side
• Use on hard-to-reach basin
nuts, ballcocks and flush
valves
Carded
No hub torque wrench (carded)
T60060
CTN/MSTR
20/80
Mega Torque Wrench
• Slide down locking reversing feature
• Heavy duty construction with chrome vanadium sockets
• 60 lb. = 5/16” socket/80 lb = 3/8” socket
PART NO.
B11010
B11011
B11012
B11013
PART NO.
T60065
T60080
T60081
T60066
284
DESCRIPTION
60 lb. - Mega Torque Wrench
80 lb. - Mega Torque Wrench with 3/8” Socket
80 lb. - Mega Torque Wrench with 5/16” Socket
5/16” Socket kit
CTN/MSTR
15/60
15/60
1
1
DESCRIPTION
10”-17” telescoping
11 3/8” long non-telescoping
9 1/2” - 16 1/2” telescoping
Spring hinged replacement jaw for
B11011
JAW
1 1/4”
1 1/4”
2”
CTN/MSTR
10/30
10/40
15/30
-
20/100
Radiator Spud Wrench
• Plated malleable iron
• For use as spud key and wrench
Radiator spud wrench
J40030
CTN/MSTR
10/20
Toll Free Phone 1-800-35-JONES (355-6637) • Toll Free Fax 1-800-462-6991 • Website www.plumbest.com
Tools
4-Way P.O. Plug Wrench
Seat Wrench For Recessed Seats
• For installing or removing basket strainers, tub drains and
p.o. plugs
4-way p.o. plug wrench
J40026
CTN/MSTR
20/60
Seat wrench for recessed seats
S62005
• Install stops easily
• Tightens 3/8” supply nuts
4-way countersunk plug wrench
J40040
CTN/MSTR
1/20
4-Way Countersunk Plug Wrench
• For installing or removing countersunk plugs
CTN/MSTR
5/15
6-Way Countersunk Plug Wrench
Dual Kwik Tie Wrench
J40490
• Lightweight, high strength plastic
• For 7/8” metal or plastic hex nuts
• Extra long to reach mounting nuts on faucets, sprayers, and
ballcocks
Lavatory Nut Removal Tool
J40035
Faucet Seat Repair Kit
CTN/MSTR
1/50
G
Universal Drain Wrench
Carded
CTN/MSTR
1/20
CTN/MSTR
15/60
Lavatory Nut Removal Tool
• 4 head sizes for square plugs
• 2 head sizes for slotted plugs
• Extra-strong iron construction
6-way wrench
J40042
CTN/MSTR
1/100
Dual Kwik Tite Wrench
4-Way Plug Wrench
4-way countersunk plug wrench
J40041
• Works in hard-to-reach recessed seats
• 6” long
• Die cast aluminum
• Installs and removes tub drains and
closet spuds
• Prevents damage to decorative finishes
• Use crescent wrench or screwdriver to
turn tool
Universal drain wrench (carded)
J45010
CTN/MSTR
12/48
Angle Compression Stop Wrench
• Reversible cone
• 4 sizes of cutters
• Hardened steel cutters smooth worn seats
• Saves repair costs; stops faucet drips
• Kit includes faucet washers and bibb screw
• Fits 3/8” compression or 1/2” male IPS outlet threads on
angle stops
• Protects finishes
Carded
Faucet seat repair kit
J40007
CTN/MSTR
12/120
Faucet Seat Wrench
• Tapered for use on
all sizes and types
of seats
PART NO.
S62001
S62002
S62003
S62004
DESCRIPTION
Straight tapered wrench
Angle tapered wrench
Straight stepped wrench
Angle stepped wrench
CTN/MSTR
100/200
20/60
100/200
20/60
Angle compression stop wrench
J40491
CTN/MSTR
10/60
Extract-a-Drain Tub Drain Removal
Tool
• Removes old or rusty drains - even drains with missing crossbars!
• Fits both 1 3/8” and 1 1/2” tub drains
• Jaws expand to firmly grip the inside of the drain
• Prevents damage to your tub’s finish
• A wrench is the only other tool that you’ll need to complete this job
Extract-a-drain tool
J40018
CTN/MSTR
1/25
285
Tools
Compression Sleeve Puller
Sink Drain Wrench
• Removes leaking compression
sleeves without damaging walls
• Unique armless design - screws
directly into compression nut for
fast removal
• For 5/8” compression nuts
• Made in the U.S.A. (J40021)
J40021
• Fits kitchen, bath & laundry tub basket
strainers, “P” traps, wing nuts and tub
drains
• Made in the U.S.A.
Sink drain wrench
J40023
CTN/MSTR
1/24
Moen Stem And Cartridge Wrench
• Removes Moen stems and cartridges
• Works on plastic and brass faucet and shower valves
J44661
Compression sleeve puller (carded)
J40021
Compression sleeve puller - 1/2” OD
J44661
CTN/MSTR
1/35
10/40
Compression Sleeve Puller Adapter
• Converts any standard faucet handle puller to remove
compression sleeves
G
Adapter
J40013
CTN QTY
10
E-ZEE Pull Deluxe Faucet Handle
Puller
• 4” bracket width
• Pulls all size handles
• Forged steel with case - hardened pin
E-ZEE pull deluxe faucet handle puller
J40012
J40011
CTN/MSTR
25/50
Carded
CTN/MSTR
25/50
15/30
Quick Drain Wrench
286
• Fits closet spuds, basket strainers, lock nuts and slip nuts
• Adjustment 7/8” to 3 1/8”
• Plated
Strainer & spud wrench
J40022
CTN/MSTR
20/40
Spud Wrench
Spud wrench
J40305
Spud wrench with hinged arm
J40306
CTN/MSTR
20/40
CTN/MSTR
30/60
Spanner/Strainer Wrench
• Plated malleable iron
• Used for basket strainer jam nuts
Spanner/strainer wrench
J40024
• Installs no caulk shower drains quickly
• Provides tongue to seal drain
Quick Drain Wrench
J40235
Adjustable Strainer And Spud Wrench
Spud Wrench With Hinged Arm
• Plated steel
• Removes faucet and valve handles
Standard unit (carded)
J40010
Heavy duty impact unit
J40011
CTN/MSTR
12/72
• For strainer, lock and slip nuts
• 1” - 3” capacity
• Heat treated forging
Faucet Handle Pullers
J40010
Stem and cartridge wrench (carded)
J45015
CTN/MSTR
25/50
CTN/MSTR
10/60
Tools
Strainer Wrench
Adjustable Wrench
• For use on basket strainers and tub drains with cross bars
• Long handle for leverage
• Plated steel
Strainer wrench
J40028
CTN/MSTR
20/60
Plumb Easy Sink Strainer Wrench
• Fits most basket strainers
• Installs and removes basket strainers with ease
• Drop forged
• Chrome plated
• Manufactured to Federal
Specification GGG-W-631-B Type I Class I
PART NO.
J40075
J40076
J40077
J40078
J40079
LENGTH
6”
8”
10”
12”
15”
CAPACITY
13/16”
15/16”
1 3/16”
1 3/8”
1 3/8”
CTN QTY
5
5
5
5
1
Curb Box Wrench
Plumb Easy sink strainer wrench
J40128
CTN/MSTR
4/32
Do All Plumbers Wrench
• Longer, more comfortable handle allows greater leverage
for tightening or loosening locknuts
• Fits most standard size basket strainers including:
Opella,Duo,Twist Lock and PB Duo. Use on any strainer
which uses a standard 3 3/8” locknut
• Fits most shower stall drains
• Fits the following drain styles:
2” Plastic No Caulk for plastic pipe
2” Brass No Caulk for plastic pipe
2” Receptor Base for plastic pipe
2” Drop In style for plastic pipe
Do All plumbers wrench (Carded)
J40019
CTN/MSTR
10/40
• Manufactured to U.S. Specification GGG-W651 Type II
Class A
• Upper and lower jaws forged and tempered
• Nodular cast iron handle
ROTHENBERGER
7.0150
7.0151
7.0152
7.0153
7.0154
7.0155
7.0156
LENGTH
8”
10”
12”
14”
18”
24”
36”
CAPACITY
1”
1 1/2”
2”
2”
2 1/2”
3”
5”
CTN QTY
6
6
6
4
2
4
4
Aluminum Pipe Wrench
• Manufactured to U.S. Specification GGG-W651 Type I
Class B
• Forged and tempered handle, bottom jaw and nut
• Alloy handle
PART NO.
J40071
J40072
J40073
J40074
J40106
ROTHENBERGER
7.0159
7.0160
7.0161
7.0162
7.0163
LENGTH
10”
14”
18”
24”
36”
CAPACITY
1 1/2”
2”
2 1/2”
3”
5”
Curb box wrench
M25900
CTN/MSTR
1/100
Box Wrench
G
• For B and MC tanks
Box wrench
J40230
CTN QTY
1
Bibb Seat Tool Set
• Set includes:
3/8” x 7/16” ratcheting box wrench
small hex/large hex tapered bibb seat tool
small square/large square tapered bibb seat tool
small square /large square straight bibb seat tool
Heavy Duty Pipe Wrench
PART NO.
J40065
J40066
J40067
J40068
J40069
J40070
J40105
• For pentagon curb boxes
• Thin wall socket fits most boxes
CTN QTY
4
6
6
6
4
Bibb seat tool set
J40308
CTN/MSTR
10/20
Strap Wrench
• For chrome fittings and nipples
7” strap wrench
J40307
11” strap wrench
J40311
CTN/MSTR
25/50
8/24
Twist-Off Strap Tool
• Grips when wet
• Will not scratch
• High density polyethylene handle
• Heavy duty rubber strap
Carded
Twist-off Strap Tool(carded)
J40325
CTN/MSTR
15/60
287
Tools
Hydrostatic Pressure Pump
Copper Fitting Brush
• Carbon steel
• CARTON QUANTITIES ONLY
• Maximum pressure 700 PSI
• 1/2” NPT hose connection
• Three gallon tank capacity
PART NO. ROTHENBERGER DESCRIPTION
CTN QTY
6.1004
Complete pressure pump unit
1
J40223
6.1313
0 - 700 PSI gauge
1
J40224
6.1300
Piston
1
J40225
RP 30 Hydrostatic Test Pump
• For quick pressure testing
and/or air tight testing
• Ideal for use in small spaces
• Steel reinforced test hose
• Test up to 440 lbs
• No false reading from any bulging of the hose!
Hydrostatic Test Pump
J40123
CTN QTY
1
Wire Handle
Wooden Handle
Wire Handle
PART NO.
B28025
B28375
B28050
B28051
B28075
B28076
B28100
B28125
B28150
B28200
ID
1/4”
3/8”
1/2”
1/2”
3/4”
3/4”
1”
1 1/4”
1 1/2”
2”
OD
3/8”
1/2”
5/8”
5/8”
7/8”
7/8”
1 1/8”
1 3/8”
1 5/8”
2 1/8”
CTN/MSTR
12/72
12/72
12/72
100-bulk
12/72
100-bulk
12/72
6/36
12/72
6/36
ID
1/4”
3/8”
1/2”
1/2”
3/4”
3/4”
1”
1 1/4”
1 1/2”
2”
OD
3/8”
1/2”
5/8”
5/8”
7/8”
7/8”
1 1/8”
1 3/8”
1 5/8”
2 1/8”
CTN/MSTR
12/72
12/72
12/72
100-bulk
12/72
100-bulk
12/72
6/36
6/36
6/36
Wooden Handle
High Pressure Hose with Fitting
• For hydrostatic pressure pump
G
High pressure hose with fitting
J40198
CTN QTY
1
Air Pump
• Large diameter
• Heavy metal construction
• Pressure gauge included
PART NO.
B29025
B29375
B29050
B29051
B29075
B29076
B29100
B29125
B29150
B29200
4-N-1 Copper Tube Fitting Brush
Heavy duty pump
P10001
• Includes four long lasting high carbon steel brushes for
1 1/2” and 3/4” copper tube and fittings
CTN/MSTR
1/10
Economy Air Pump
Copper tube and fitting brush
B10004
CTN/MSTR
1/10
Female Copper Tube Brush
1 1/2” x 18” air pump
P10002
Water Pump
• Excellent for draining water meter boxes
• High impact PVC; non-sparking; lightweight
• No priming necessary- removes 35 ounce/stroke
• Remove foot valve to clean
36” pump with 72” discharge hose
P13600
288
• For cleaning copper tubing
CTN/MSTR
1/12
PART NO.
B29625
B29875
B29999
DESCRIPTION
CTS OD 5/8” copper tube brush
CTS OD 7/8” copper tube brush
CTS OD 1 1/8” copper tube brush
CTN QTY
6
6
6
CTN QTY
1
Tools
Socket Savers
Heavy Duty PVC Pipe Cutters
• Removes Schedule 40 plastic pipe
• Cuts ABS or PVC DWV pipe
below slab
• Fits 1/2” variable speed power drill
• Carded for display
PART NO.
J44050
J44075
J44100
J44150
J44200
J44300
J44400
DESCRIPTION
1/2” Socket Saver
3/4” Socket Saver
1” Socket Saver
1 1/2” Socket Saver
2” Socket Saver
3” Socket Saver
4” Socket Saver
CTN/MSTR
36/144
30/120
24/96
24/96
12/72
12/48
20/40
Inside Pipe Cutter
• High carbon steel blades
• Repair kits includes all screws and springs needed to
repair cutter
• Aluminum alloy handles
PART NO.
P70010
P70011
P70012
P70002
P70006
P70016
• Easy one-handed ratchet cutting action
• Spring loaded blade
• Heat treated hardened steel blade for straighter cuts longer life
• Contractor quality - great for plumbers, pool contractors,
electricians, etc.
• Cuts up to 2” pipe (2 1/2” OD)
CTN/MSTR
1/50
10
2” PVC One-handed pipe cutter
P70035
2” replacement blade
P70036
CTN/MSTR
24/192
1/100
PVC Pipe Cutters
• High carbon steel blades
• Repair kits includes all screws and springs needed to
repair cutter
• Aluminum alloy handles
• Ratchet action
DESCRIPTION
1” pipe cutter (carded)
1” repair kit
G
• Rustproof
• Capacity to 1 1/4” diameter PVC
• The blade is non-electro nickel plated which ensures a
sharper blade
• Locking hook can be used to deburr pipe
• Cuts PVC and ABS pipe
• High speed steel blade with zinc-plated shaft
PART NO.
P70001
P70005
P70015
CTN/MSTR
6/24
10/100
Professional PVC Pipe Cutter
PlumBest E-Z Shear Inside Pipe
Cutter
E-Z shear inside pipe cutter
J40830
Two (2) E-Z shear replacement blades
J40831
CTN/MSTR
1/60
1/100
1/100
1/20
1/100
1/100
PVC One-Handed Pipe Cutters
• Cuts 2” and larger plastic pipe
• Fits electric drill
3” shaft with 2 blades
P70023
3 replacement blades
P70029
DESCRIPTION
1” heavy duty pipe cutter (boxed)
1” heavy duty replacement blade
1” repair kit
2” pipe cutter (boxed)
2” repair kit
CTN/MSTR
10/50
25/300
1/100
PART NO.
P70018
P70019
P70020
DESCRIPTION
1 1/4” PVC pipe cutter (carded)
Replacement blade for P70018
Repair kit
CTN/MSTR
5/30
10/100
10/100
Vinyl Tubing Cutter
• Plastic body
• Cuts up to 1” vinyl tubing
Vinyl tube cutter
P70030
Vinyl tube cutter replacement blade
P70031
CTN/MSTR
12/72
1/50
Telescopic Tubing Cutter
• Extra wheel in handle
• Grooved roller
• 1/4”- 1 1/4” cutter
• Imported
• Built-in deburring tool
PART NO.
P70050
P70055
P70056
DESCRIPTION
Telescopic tubing cutter
Replacement cutter wheel
Two (2) Replacement cutter wheels
CTN/MSTR
10/100
1/100
50/100
289
Tools
Telescoping Tubing Cutter
Mini Tubing Cutter
• Enclosed feed mechanism
• Grooved rollers for close-toflare cuts
• Anodized body for corrosion resistance
• Allows cut with shorter arc
• Fold-away reamer
• Spare cutter wheel stored in body
PART NO.
J40240
J40241
J40242
J40243
J40244
ROTHENBERGER
7.0010
7.0011
7.0007
51250
51240
DESCRIPTION
CTN QTY
1/8” - 1 1/8” O.D. capacity
1
1/4” - 1 5/8” O.D. capacity
1
1
Cutter wheel pin
1
Cutter wheel pin retaining ring
1
PART NO.
J40213
J40214
J40215
J40228
ROTHENBERGER
7.0001
7.0002
7.0003
7.0006
DESCRIPTION
5/8” capacity tubing cutter
7/8” capacity tubing cutter
Cutter wheel screw
CTN/MSTR
1/24
1/24
1
6/48
Mini Tubing Cutter
• 1/8”- 1/2” cutter
Enclosed Feed Tube Cutter
• Extra cutter in knob
• Heavy duty one piece slide
• Polished rollers for easy rotation
• Cuts: Copper, brass, aluminum
tubing, thin-wall conduit
Retractable
Deburring
Blade
G
1/8” x 1 3/16”
P70064
Two (2) Replacement cutter wheels
P70056
CTN/MSTR
10/100
50/500
PART NO.
P70051
P70060
P70067
DESCRIPTION
Mini tubing cutter - 1/8”-7/8”
Mini tubing cutter- 1/8”- 1 1/8”
Replacement blades (slide blister)
Mini Tubing Cutter
Quick Release Tubing Cutter
• Good for all soft metal tubing
• Spring-loaded for quick size
adjustment
• Spring cutter wheel in handle
• Imported
P70069 Carded
1/4” - 2” O.D. Capacity tubing cutter
P70065
Two (2) Replacement cutter wheels (carded)
P70069
CTN/MSTR
6/48
1
Quick Release Tubing Cutter
PART NO.
P70052
P70053
P70067
ROTHENBERGER
7.0030
7.0005
7.0028
7.0006
• Self-clamping and self-aligning
• Easy to use in close quarters
• Cuts copper and PVC quickly and easily
DESCRIPTION
CTN/MSTR
1/4” - 2 5/8” heavy duty cutter
1
Repl. cutter wheel for metal
1
Repl. cutter wheel for plastic
1
Cutter wheel screw
1/10
PART NO.
J40260
J40261
J40263
DESCRIPTION
1/2” Copper tube cutter
3/4” Copper tube cutter
Replacement blades for J40260 & J40261
•Screw-feed
• Zinc plated
CTN/MSTR
10/100
50/500
• Cuts multiple sizes of copper, aluminum tubing, and thinwall conduit
• Long handle for more leverage
1/4”-3/4” Ratcheting handle copper tube cutter
J40262
290
CTN/MSTR
10/100
10/60
1
Ratcheting Handle Copper Tube
Cutter
Economy Tube Cutter
1/8”- 1 1/8”
P70066
P70067
DESCRIPTION
CTN/MSTR
Mini tubing cutter-1/8”-7/8” (uses P70055 repl. blade) 12/120
Mini tubing cutter- 1/8”- 1 1/8”
1
50/500
Copper Tube Cutter
• Spring-loaded ratchet allows
for quick size adjustment and
release
• Spare cutter wheel in handle
PART NO.
J40217
J40218
J40219
J40228
CTN/MSTR
20/200
25/100
50/500
CTN/MSTR
6/48
Tools
E-Z Stroke Pipe Saw
S49005
S49007
Cable Saws
S49008
• For smooth, fast, accurate cutting
• Tri-edge teeth are borazon wheel ground
• Pull-stroke cutting action
• Cuts plastic pipe and wood
• Replaceable blade
PART NO.
S49005
S49006
S49008
S49007
DESCRIPTION
8” E-Z stroke pipe saw
8” Replacement blade
12” E-Z stroke pipe saw
Bagged with Header
CTN/MSTR
10/100
50/250
10/100
50/200
PART NO.
S49136
S49148
S49036
S49048
DESCRIPTION
36” cable saws with display
48” cable saws with display
36” cable saw
48” cable saw
• For cutting PVC pipe
• Strong and comfortable t-handles
• Polybagged with header card
• Great for use in tight spots
• Long-lasting stainless steel cutting cable
• Die cast aluminum handle
• Quickly cuts PVC, ABS, wood, sheetrock, etc.
• Large comfortable grip
• Flame hardened blade
• 18” blade has 10 teeth/inch
DESCRIPTION
18” PlumBest saw
Handle only
Bagged with Header
CTN QTY
6
10
10
36” cable saw
S49236
CTN QTY
1
Close Quarters Hacksaw
• High quality carbon steel blade
• Great for sheetrock, wallboard, gypsum, plywood, wood
and plastic pipe
• 6” 8 TPI aggressive tooth design ensures super sharp, fast
& easy cut
• Comfortable grip with thumb stop for greater leverage
• Handy wrist strap
CTN/MSTR
1/10
1/300
• Die cast aluminum handle
• Case hardened steel blade
• Deburrs as it cuts
• Cuts up to 4” PVC pipe
• 8 1/2” blade; 10 teeth/inch
• Unique nose teeth permit starting cuts on flat surfaces
CTN QTY
1
1
Hardwood 250 Speed Handsaw
• Great for hardwood and laminated wood
• Tri-edge and impulse hardened teeth for accurate rip, cross
and slant cuts
Hardwood 250 Speed Handsaw
S49200
Replacement blade
S49201
S50060
PART NO.
S50060
S50061
S50062
S50063
S50062
DESCRIPTION
6” close quarters hacksaw
Replacement blades for S50060
6” adjustable hacksaw
Replacement blades for S50062
CTN/MSTR
1/50
5/800
12/144
5/500
PlumBest Hacksaw
Jr. Plumber’s Saw
Jr. Plumber’s saw
S49004
8 1/2” Replacement blade
S49000
G
• Nickel plated steel frame
• Cuts wood, plastic, brass,
aluminum and steel
Drywall Saw
Drywall saw
S49012
Replacement blade
S49013
CTN QTY
36
24
1
1
T-Handle Cable Saw
PlumBest Plastic Saw
PART NO.
S49001
S49002
S49010
• For cutting PVC pipe
• For tight spots offering little clearance
• Fits easily into tool box and pocket
• Faster and easier than hacksaws in close
quarters
• Individually bagged with header card
• Heavy square tubing and die cast construction
• Stores extra blades
• Blade tensioning adjustment
• Cuts flush with surface
Hacksaw with blade
S49003
CTN/MSTR
6/36
Utility Knife
• Heavy duty construction
• Supplied with extra blade
• Coated case
Utility knife
K50041
Five replacement blades per pack
K50042
CTN/MSTR
12/120
100/1000
CTN QTY
10/60
50/100
291
Tools
Snap Knife
Economy Shovels
• Seven point snap-off blade
• Counter display box has 30 pcs.
• Replacement blades
• 10 per tube, priced each
PART NO.
K50001
K50002
K50003
DESCRIPTION
Snap knives with display box
7 point snap knife
7 point replacement blade
CTN/MSTR
30/300
40/480
10/200
S49431 (15-047)
S49432 (15-049)
Long handle round point
S49431
Long handle square point
S49432
AMES #
15-047
15-049
BUNDLE QTY
6
6
Specialty Shovels
Deluxe Autolock Snap Knife
• Blade automatically locks into position
• Contoured shape for a more comfortable grip
Deluxe autolock snap knife
K50005
CTN QTY
20/200
Compact utility shovel
S49429
Fiberglass Handle Shovels
G
S49411 (SFGLR)
S49416 (SFGD16)
PART NO.
S49411
S49412
S49416
S49413
S49412 (SFGLS)
• STINGER SERIES - Fiberglass
handle is 40% stronger than
Federal Strength Test for long
handle wood tools.
• Large steel collar adds maximum
strength to handle/socket connection.
• Forward - turned step for secure
foot placement
S49413 (SFGDSL)
DESCRIPTION
D-Handle 16” drain spade
Long handle 16” drain spade
AMES #
SFGLR
SFGLS
SFGD16
SFGDSL
S49429 (15-663)
• KODIAK CUB - smaller design for easier use in tight
spaces
• 16 gauge tempered steel blade
• Forward turned step
• 27” overall length
BUNDLE QTY
6
6
6
6
Premium Grade Wood Handle
Shovels
AMES #
15-663
BUNDLE QTY
6
Long Handle Round Point Fiberglass
Shovel
• Long fiberglass handle
• Round point
S49400
BUNDLE QTY
6
Cold Chisels
• Designed for cutting cast iron or steel
1” wide x 8” regular length
J41002
CTN/MSTR
1/24
Short Nose Caulking Tools
• For finishing lead joint
S49421 (BMTLR)
S49422 (BMTLS)
• Lacquered ash handle
• Premium blade
5/8” wide x 7 1/2” long
J41008
CTN/MSTR
1/24
Inside Caulking Tools
S49417 (BMTDR)
PART NO.
S49421
S49422
S49417
S49423
S49425
S49427
292
S49423 (15-738)
DESCRIPTION
D-Handle round point
D-Handle 16” drain spade
LH trenching shovel 4” blade
LH trenching shovel 5” blade
S49425 (15-566)
AMES #
BMTLR
BMTLS
BMTDR
15-738
15-566
15-567
BUNDLE QTY
6
6
6
6
6
6
5/8” wide x 7” long
J41009
CTN/MSTR
1/24
Tools
Outside Caulking Tools
Striking Tools
5/8” wide x 7” long
J41010
• Made in the USA
• Hickory handles
• Long life - high quality
CTN/MSTR
1/24
Broad Curve Nose Caulking Tools
• Used for packing Oakum tight
• For first pass on lead
5/8” wide x 8” x 1 1/2”
J41011
CTN/MSTR
1/24
17 Pound Digging/Tamping Bar
• For digging holes, cutting roots or tamping
1” x 69” post hole digger
S49500
CTN QTY
1
PART NO.
J40144
J40142
J40143
• Hardwood handle
• 5 pound head
5 lb. pick mattock with handle
J40141
CTN. QTY.
1
Utility Pry Bar
14” utility pry bar
S49489
CTN/MSTR
1/4
Probing Rod
CTN/MSTR
1/5
Manhole Cover Lifter
G
• Weather resistant fiberglass
• Eliminates danger of shock
• Tip is not replaceable
4’
P27048
• 14” long
• Hang tab included
DESCRIPTION
Slim bar 360 nail puller
CTN QTY
2
3
3
Pick Mattock
Slim Bar 360 Nail Puller
PART NO.
J40-400
DESCRIPTION
3 lb. engineers hammer
6 lb. sledgehammer
8 lb. sledgehammer
CTN QTY
5
Steel Probing Rod
• Stainless steel tips
• Cushion vinyl handle
• Welded steel construction
PART NO.
P27004
P27005
P27001
DESCRIPTION
4’
5’
Stainless steel tip
CTN QTY
5
5
5
Steel Probing Rod With Ball Point
• Steel shaft
• Vinyl handle for comfort
• Carbon steel ballpoint will not
puncture soft pipe
• Tip is not replaceable
• 25” long
Ballpoint Tip
Manhole cover lifter
S49490
CTN/MSTR
1/10
3’ metal probing rod
P27003
4’ metal probing rod
P27040
CTN QTY
1
1
Gooseneck Wrecking Bar
• Painted and polished
• Claw on end removes nails
30” wrecking bar
S49501
CTN/MSTR
1/10
293
Tools
Water Meter Keys
Polybutylene Crimping Tools
• Rebar shaft and handle for greater strength
• Vinyl covered handle comfort
PART NO.
M25127
M25136
M25148
M25527
M25536
M25560
M25736
M25760
M25772
M25784
DIAMETER x LENGTH
1/2” x 27”
1/2” x 36”
1/2” x 48”
5/8” x 27”
5/8” x 36”
5/8” x 60”
3/4” x 36”
3/4” x 60”
3/4” x 72”
3/4” x 84”
• Single crimp and combo
tools
• Made in the USA
• Accurate and easy to use
• Unit can be calibrated in the field
BUNDLE QTY
5
5
5
5
5
5
5
5
5
5
Combo Water Meter Key
1/2” regular crimping tool
J42002
3/4” regular crimping tool
J42003
1/2”- 3/4” combo crimping tool
J42004
Note: These tools cannot be returned for repair.
CTN QTY
1
1
1
Pex Crimp Set
• For use on crimping PEX pipe
with copper crimp rings and stainless steel bands
J40950
J40952
J40965
J40966
• Rebar shaft and handle for greater strength
• Vinyl covered handle comfort
• Combo lid key and meter key
G
PART NO.
M25130
SIZE
1/2” x 30”
BUNDLE QTY
5
Gate Valve Key
PART NO.
M25100
SIZE
30”
CTN QTY
5
PART NO.
J40950
J40951
J40952
J40953
J40954
J40955
J40960
J40965
J40966
DESCRIPTION
PEX crimp set with 3/8”, 1/2”, 3/4”
3/8” PEX crimp tool
1” PEX crimp tool
PEX crimp sizing tool
PEX crimp ring cutter
One hand PEX SS clamp tool
PEX SS clamp tool
Oetiker® 3-Handle Ratcheting Crimp Tool
Copper Sizing Tool
• Tool will not release until clamp is
properly closed
• Robust fastener with assist lever
• Single handed installation
possible
• For type “M” copper tubing
• Impact type to reround tube
PART NO.
J40750
J40775
J40800
DESCRIPTION
1/2” Copper sizing tool
3/4” Copper sizing tool
1” Copper sizing tool
CTN/MSTR
10/60
10/40
10/30
3” hand crimp tool
J40967
J40369
• Use J40375 on 1/4”, 5/16”, 3/8”, 1/2”, and
5/8” copper tube
• Use J40369 on 5/8”, 7/8”, and 1 1/8”
copper tube
• Heat-treated carbon steel
• Can also be used on soft copper, aluminum or any other thin-walled tubing
Copper swedge tool
J40375
Copper swedge tool (up to 1 1/8”)
J40369
294
CTN QTY
1
Flaring Tool
• Makes smooth flare
• For O.D. sizes 3/16”, 1/4”, 5/16”,
3/8”, 1/2” and 5/8”
Copper Swedge Tool
J40375
CTN QTY
1
1
1
1
1
1
1
1
1
Bar flaring tool
J40080
CTN/MSTR
6/24
CTN/MSTR
25/100
12/24
Tools
Swing Release Flaring Tool
Carbide Tipped Masonry Drill Bit
• 3/16”- 5/8” O.D.
• 45° single flare
45° flaring tool
J40220
CTN/MSTR
1/12
Deburring Tool
• Easily removes burrs inside and outside of copper and
plastic
• Handle stores spare blades
Deburring tool with blade
J40221
Replacement blade only
J40222
CTN/MSTR
40/180
1
Nipple Extractor Sets
Nipple extractor set - 3/8”, 1/2”, 3/4”
J40054
Nipple extractor set - 3/8”, 1/2”, 3/4”, 1”
J40055
CTN QTY
1
1
Internal Pipe Nipple Extractors
• Heat treated and cad plated
• Removes or inserts nipples
PART NO.
J40050
J40051
J40052
J40053
DESCRIPTION
3/8” nipple extractor
1” nipple extractor
CTN/MSTR
100/200
20/120
50/100
25/50
Nipple And Screw Extractors
• Left hand spiral
• Removes nipples, bolts, and screws without thread damage
PART NO.
J41103
J41104
J41105
J41106
J41107
J41108
PIPE SIZE
1/8”
1/4”
3/8”
1/2”
3/4”
1”
DRILL SIZE
1/4”
19/64”
13/32”
17/32”
13/16”
1 1/16”
BOLT SIZE
9/32” - 3/8”
3/8” - 5/8”
5/8” - 7/8”
7/8” - 1 1/8”
1 1/8” - 1 3/8”
1 3/8” - 2”
PART NO.
S41349
S41351
S41350
S41352
S41353
S41354
S41355
S41356
S41357
REGULAR LENGTHS
5/32” x 4”
3/16” x 4”
1/4” x 4”
5/16” x 4”
3/8” x 6”
7/16” x6”
1/2” x 6”
9/16” x 6”
5/8” x 6”
SHANK SIZE
3/16”
3/16”
1/4”
1/4”
1/4”
3/8”
3/8”
1/2”
1/2”
CTN QTY
1
1
1
1
1
1
1
1
1
Dual Auger Wood Bits
Screw Point
• Up to 1” for use in 3/8” or 1/2” power drill; 1” and up for use
in 1/2”
PART NO.
B21625
B21075
B21087
B21100
B21112
B21125
B21150
DESCRIPTION
5/8” x 6” long
3/4” x 6” long
7/8” x 6” long
1” x 6” long
1 1/8” x 6” long
1 1/4” x 6” long
1 1/2” x 6” long
CTN QTY
1
1
1
1
1
1
1
G
Flat “Paddle” Wood Bits
PART NO.
B24375
B24050
B24056
B24063
B24075
B24081
B24088
B24100
B24113
B24125
B24150
SIZE
3/8”
1/2”
9/16”
5/8”
3/4”
13/16”
7/8”
1”
1 1/8”
1 1/4”
1 1/2”
CTN QTY
1
1
1
1
1
1
1
1
1
1
1
CTN QTY
1
1
1
1
1
1
295
Tools
Straight Shank Drill Bits
Neon Precision Tape
• High speed steel
• Jobber’s length
G
PART NO.
B20062
B20078
B20094
B20109
B20125
B20141
B20156
B20172
B20188
B20203
B20219
B20234
B20250
B20266
B20281
B20297
B20313
B20328
B20344
B20359
B20375
B20391
B20406
B20422
B20438
B20453
B20469
B20484
B20500
• Sure grip case
DESCRIPTION
1/16” drill
5/64” drill
3/32” drill
7/64” drill
1/8” drill
9/64” drill
5/32” drill
11/64” drill
3/16” drill
13/64” drill
7/32” drill
15/64” drill
1/4” drill
17/64” drill
9/32” drill
19/64” drill
5/16” drill
21/64” drill (1/8” pipe tap)
11/32” drill
23/64” drill
3/8” drill
25/64” drill
13/32” drill
27/64” drill
7/16” drill (1/4” pipe tap)
29/64” drill
15/32” drill
31/64” drill
1/2” drill
CTN QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Pipe Taps
1” x 25’ neon orange tape
J40086
1” x 25’ neon yellow tape
J40087
CTN/MSTR
6/48
6/48
Long Tape
• Hook blade
• Pop-open handle
3/8” x 50’ tape
J40088
3/8” x 100’ tape
J40089
CTN/MSTR
6/36
6/24
Locking Measuring Tape
Call Us for Private Labeling
• Unbreakable chrome plated case
• Power return
• Double riveted tang
• Cushion stop
• Positive lock
• Yellow tape
1” x 25’ tape
J40046
3/4” x 16’ tape
J40045
CTN/MSTR
6/48
12/144
• NPT
• High carbon steel
PART NO.
T41001
T41002
T41003
T41004
T41005
T41006
T41009
T41007
T41008
DESCRIPTION
1/8” NPT pipe tap
1/4” NPT pipe tap
3/8” NPT pipe tap
1/2” NPT pipe tap
3/4” NPT pipe tap
1” NPT pipe tap
1 1/4” NPT pipe tap
1 1/2” NPT pipe tap
2” NPT pipe tap
CTN QTY
1
1
1
1
1
1
1
1
1
• 1” locking blade with push button
lock
• Offset fractions for easy reading
• Auto recoil; belt clip and wrist
strap
• Red stud markings and joist
markings
296
• Round file style
• Renewable flint
• Flints priced per pack of 5 renewals
Striker
J40048
Pack of 5 flint renewals
J40049
CTN/MSTR
25/200
50/200
Three Flint Friction Lighter
PlumbRule Tape Measure
1” x 25’ tape
J40101
Flint Striker
• Flints priced per pack of 4 renewals
Three flint friction lighter
J40047
Flint renewal unit (4/card)
J40044
CTN/MSTR
6/48
1
CTN/MSTR
6/48
Tools
PlumBest MAPP & Propane Cylinders
• Temperatures for burning: Propane 2300°, MAPP 3300°
• LTL TRANSPORTATION ONLY
• NO UPS/FED EX
14.1 oz. Propane
J40601
16 oz. MAPP
J40600
CTN QTY
12
12
Uniweld Torches
J40529
PART NO.
J40529
J40329
J40629
J40429
• Meets ASTM B-813
• Water soluble for faster flushing
from pipe lines
• Super detergent action cleans as it solders
• Non-acid, non-toxic and lead free
• Contains no zinc chloride
• Use with all lead free and common soft solders
• For use on most metal types
4 oz. Flux-Rite 90® Flux
S95104
1 lb. Flux-Rite 90® Flux
S95105
CTN/MSTR
1/24
1/12
Phos-Copper Brazing Rod
J40629
DESCRIPTION
Hand torch with swivel tip and self-igniter
UT6 replacement tip for J40529
Hand torch with swivel tip
UT5 replacement tip for J40629
CTN QTY
6
1
6
1
• Includes valve, stem, and burner
• For MAPP or propane
Pencil flame torch
J40229
CTN QTY
1
Solder Shield Protective Blanket
• For use when combustible material is present during soldering
• 9” x 12” protection area
• Protects up to 2300°F for five minutes
• Smoke and odor free non-asbestos material
• Lends a clean, professional appearance to
your work
• Durable woven ceramic holds up well in
multiple uses
9” x 12” Solder shield
J40812
CTN QTY
1
Flux Paste
• Meets ASTM B813
• Water flushable for faster rinsing from pipe lines
• Super detergent action cleans as it solders
• Non-acid, non-toxic, lead-free
• Contains no zinc chloride
• Use with all lead-free and common soft solders
• For use on copper, brass, galvanized iron, lead, zinc, tin,
silver, nickel, mild steel, terne plate, and malleable iron
• Meets Mil. Spec. Mil-F-4995 Type II
DESCRIPTION
4 oz. Flux Paste
4 oz. Flux Paste with brush in cap
1 lb. Flux Paste
• 92.9% copper/ 7.1% phos
• Tensile strength 91,000 PSI
• Self-fluxing
• Liquid 1460°F, solid 1310°F
• Working temp 1350°-1500°F
• 1 pound plastic tubes
1 lb. tube brazing rod
J41021
CTN/MSTR
1/10
2% Silver Solder
G
• 91% copper/ 7% phos/ 2% silver
• Meets AWS A5.8QQB-650 B Cup-6
Pencil Flame Torch
PART NO.
S95102
S95106
S95103
Flux-Rite 90® Flux
1 lb. tube 2% silver solder
J41022
CTN/MSTR
1/10
5% Silver Solder
• Meets AWS A5.8-81-BCup3 Fed QQB650B
• Working temperature 1300°-1550°F
1 lb. 5% silver solder
J41023
CTN/MSTR
1/10
15% Silver Solder
• Meets AWS A5.8-81-BC7P3 Fed QQB650B
• Working temperature 1300°-1500°F
1 lb. tube 15% silver solder
J41024
CTN/MSTR
1/10
CTN QTY
48
48
24
297
Tools
Freeze Fix Pipe Jackets
• Fast, easy way to freeze pipe up to 4”
• Saves time and money on pipe repairs
• Repairs can be made without draining the
water out of the line
Griplock Tongue & Groove Water
Pump Pliers
• Comfort grips
Quick Way to Freeze Pipes for Easy Repair!
PART NO.
J40801
J40802
J40803
J40804
J40805
J40806
J40807
J40808
DESCRIPTION
3/8” - 3/4” jacket
3/4” - 1 1/2” jacket
1 1/2” - 3” jacket
3” - 4” jacket
8’ hose and connectors for CO2 kit
Tee connector for CO2 freeze kit
Freeze fix carry bag
CO2 empty cylinder (20 lb. size)
L xW
8” x 4 1/2”
10 1/2” x 7”
14” x 8 1/2”
16” x 11”
-
CTN QTY
1
1
1
1
1
1
1
1
Files
J40410
J40411
• Durable plastic handles
• Top quality alloy steel
DESCRIPTION
8” mill bastard file with handle
10” mill bastard file with handle
12” half round file
14” half round file
CTN/MSTR
1/4
1/4
1/4
1/4
Sure Sweat Dissolvable Pipe Plugs
1/2” kit (7 plugs per box)
H56050
3/4” kit (5 plugs per box)
H56075
CTN/MSTR
1 box of 7/24
1 box of 5/24
Slip Jaw Pliers
• Plated finish
• Plastic grips
2 1/8” capacity / 10” long
P60001
CAPACITY
CTN QTY
1 1/4”
2 1/4”
5
5
CTN QTY
5
• Drop forged vanadium steel;
black epoxy powder coated
• Cushion grip
• Self-locking on pipe
ROTHENBERGER
7.0521
7.0522
7.0523
LENGTH
7”
10”
12”
• 2 1/8” jaw opening
• Smooth jaws for non-arring surfaces (chrome, polished
brass)
• Cushioned vinyl grips
10” Smooth jaw pliers
P60003
CTN QTY
6
6
6
CTN/MSTR
10/50
Tongue & Groove Pliers
• Right angle teeth
• Undercut tongue and groovewon’t slip
• Comfort grips
PART NO.
J40401
J40402
J40403
J40404
J40405
CHANNEL
LOCK NO.
426
420
430
440
460
LENGTH
6 1/2”
9 1/2”
10”
12”
16”
NO.
ADJ.
5
5
7
7
8
CAPACITY
CTN QTY
7/8”
1 1/2”
2”
2 1/4”
4 1/4”
5
5
5
5
2
Curved Jaw Tongue & Groove Pliers
• Curved jaw for use on round
stock and tubing
• Right angle teeth
PART NO.
CAPACITY
1”
1 1/4”
1 1/2”
CTN/MSTR
4/40
10” Smooth Jaw Pliers
Water Pump Pliers
298
10”
12”
NO.
ADJ.
5
6
• 10” comfort cushion grips
• Unique handle design prevents pinched fingers
• 1 3/4” jaw capacity
• Drop forged; plated finish
• Stop water from inside the pipe
• Dissolve safely and completely
with water
PART NO.
J40210
J40211
J40212
LENGTH
“No Pinch” Pipe Wrench Pliers
J41205
PART NO.
J41201
J41202
J41205
J41206
CHANNEL
LOCK NO.
GL10
GL12
10” Pipe wrench pliers
P60002
J41201
G
PART NO.
J40407
J40408
CHANNEL
LOCK NO.
422
442
LENGTH
9 1/2”
12”
NO.
ADJ.
5
7
CAPACITY
CTN QTY
1 1/2”
2 1/4”
5
5
Tools
Smooth Jaw Tongue & Groove Pliers
• Smooth jaws for non-marring
surfaces (PVC, chromes, etc.)
• Undercut tongue and groovewon’t slip
• Comfort grips
PART NO.
J40406
CHANNEL
LOCK NO.
415
LENGTH
10”
NO.
ADJ.
7
• For insert type bits
• Magnetic
1/4” drive x 3” long
S41307
CAPACITY
CTN QTY
2”
5
4 in 1 Screwdriver
• Alloy tool steel bits
• Ground and polished
• Heat treated for maximum strength
• High impact handle
• Floating ball bearing for tight fit
S41001 - 12 pk Display
PART NO.
S41001
S41002
S41003
Bit Holders
DESCRIPTION
Phillips and slotted
Slotted bit for 4 in 1 or 6 in 1
Phillips bit for 4 in 1
CTN QTY
12
1
1
Phillips Bits
Insert Type
PART NO.
S41306
DESCRIPTION
#2 point 1/4” hex 1” long
CTN QTY
1
DESCRIPTION
# 2 point 1/4” hex 11 5/16” long
CTN QTY
1
Long Insert Type
PART NO.
S41308
100% Silicone Tub And Tile Sealant
6 in 1 Screwdriver
• Shaft ends are 1/4” and 15/16” hex
size for use as nut drivers
• Each bit has two sizes
S41006 - 12 pk Display
PART NO.
S41006
S41002
S41007
DESCRIPTION
6 in 1 screwdriver
Slotted bit for 4 in 1 or 6 in 1
Phillips bit for 6 in 1
CTN QTY
12
1
1
Magnetic Power Nut Setters
DESCRIPTION
1 3/4” long 1/4” head size
CTN QTY
1
1
1
1
DESCRIPTION
3/16” Nut driver
1/4” Nut driver
5/16” Nut driver
3/8” Nut driver
7/16” Nut driver
1/2” Nut driver
PART NO.
J40199
J40197
J40200
J40201
J40200
J40201
DESCRIPTION
2.8 oz. tube CLEAR caulk
2.8 oz. tube WHITE caulk
G
CTN QTY
12
12
12
12
• Flexible, easy to use
• 50 year life
• Will not stain or bleed
• Seal, bond or insulate
J40208
J40288
CTN QTY
12
12
25-Year Siliconized Acrylic Caulk
Nut Driver
PART NO.
S06014
S06015
S06016
S06017
S06018
S06019
J40197
J40199
• Ideal for tubs, sinks,
toilets, showers and
resetting loose tiles
• Warranted to last as long as the fixture
• Contains potent mildewcide
• Application temperature range -10°F to 100°F
• Service temperature range -60°F to 400°F
PlumBest 100% Silicone Caulk
• 1/4” hex shaft
PART NO.
S41300
S41301
S41302
S41303
CTN QTY
1
CTN QTY
10
10
10
10
10
10
• Cleans up with water
• Paintable
• Application temperature range 40°F to 90°F
• Service temperature range 0°F to 200°F
J40202
CTN QTY
12
299
Tools
Acrylic Tub And Tile Caulk
Fire Seal-136 Firestopping Caulk
•Long-lasting watertight
seal around tubs, showers, and sinks
• Cleans up with water
• Odorless, mildew resistant
• Paintable
• Application temperature range 40°F to 90°F
• Service temperature range 0°F to 200°F
PART NO.
J40203
J40204
J40206
DESCRIPTION
5.5 oz. ALMOND caulk
5.5 oz. WHITE caulk
10.1 oz. WHITE caulk
CTN QTY
12
12
12
Latex Caulk
10.3 oz. tube
J40287
CTN QTY
12
Putty Knives
• USDA approved, UL listed,
meets NSF 51
• Temperature from 65°F to 650°F
Counter Display
• No tools required - manual installation allows for no time
wasted applying and removing thread tape after each use!
Cost-effective, too!
• Reusable - long lasting
• Caps and 1/2” male thread for testing
• 9” barrel
• Drop-in half barrel type
• Painted steel
CTN QTY
10
Professional Caulking Gun
CTN QTY
12
Firestop 814+ Intumescent
Firestopping Sealant
J40284
J40286
5 gallons
J40284
10.3 oz. tube
J40286
300
1/2” FIP Handicap
H54100
CTN QTY
1
Lumber Crayon
• Fade-proof, waterproof and smear- proof
• Will work on wet or dry wood, metal and
concrete
• 4 1/2” long by 1/2” diameter
• Parallel hex rod frame
• Seal puncture tool
• Thumb release
• E-Z thrust mechanism
• Spout cutter
• Ladder hook
Parallel hex rod caulking gun
C35091
CTN QTY
25
Handicap
Caulking Gun
Caulking gun
C35090
• Combination test plug and stub-out for drop eared ell
• No tools required - manual installation allows for no
time wasted applying and removing thread tape after
each use! Cost-effective, too!
• No thread seal required
• Reusable - long lasting
• Smooth at thread end for easy plastering
• Time and labor savings
1/2” MIP Handi-Plug
H54050
CTN QTY
12
CTN/MSTR
12/144
12/144
PlumBest Handi-Plug
Red Silicone Caulk
G Hi-Temp 100%
• 100% silicone
Hi-temp 100% silicone caulk
J40285
CTN QTY
12
1 1/4” putty knife
K50015
3” putty knife
K50016
• General purpose
• Dries quickly
• Paintable
10.1 oz. WHITE caulk
J40207
• Resumes integrity of fireblocks 1 & 2 family construction
• Meets ASTM-E136 test standards
• Fulfills all residential fireblocking code requirements
• Colored red for ease of inspection
• Fulfills residential and commercial
firestopping code requirements
• Meets ASTM-E814/UL 1479 test
standards
• Resumes integrity for 1 & 2 hour fire
rated assemblies
PART NO.
J40350
J40351
J40352
J40353
DESCRIPTION
Black lumber crayon
Yellow lumber crayon
Red lumber crayon
Blue lumber crayon
CTN QTY
12
12
12
12
Carpenters Pencil
• Flat black lead makes wood marking crisp and accurate
• Long-lasting and easy sharpening
Carpenters pencil
J40360
CTN QTY
12
CTN QTY
1
12
Tools
PlumBest® Spray Weld
Marking Products
• High-performance industrial
marking products
• Permanent paint
• Quick drying
PART NO.
J40330
J40331
J40332
J40333
J40334
J40335
J40336
J40337
J40338
J40339
J40340
J40341
J40342
J40343
DESCRIPTION
Dura Ink 15 Marker Red
Dura Ink 15 Marker Black
Dura Ink 55 Marker Red
Paint Marker White
Paint Marker Yellow
Paint Marker Red
Paint Marker Black
Paint Marker Blue
Paint Marker Display
Round Counter Display Black
Round Counter Display Red/Black
CTN QTY
72
72
48
48
48
24
48
48
48
48
48
1
1
1
Industrial Choice Precision-Line
Inverted Marking Paint
• Features a distance tip for easy-to-read, bright, vivid markings
• Marks more linear feet than the competition
• Virtually no overspray
• Fast-drying and non-clogging
• Can be applied down to 25°F
• Dries in 5 minutes or less
• Easy-to-use, spray through cap guaranteed not to clog
• “No Mess” spray tip keeps paint off finger
• Locking tip keeps tip from popping off
• Best resistance to premature chalking and fading
• GROUND TRANSPORTATION ONLY
PART NO.
J40380
J40381
J40382
J40383
J40384
J40385
J40387
DESCRIPTION
White marking point
Yellow marking point
Red marking point
Blue marking point
Green marking point
Orange marking point
Pink marking point
CTN QTY
12
12
12
12
12
12
12
Paint Spotter Hand-Help Wand
• For quick, easy one-hand application of marking point
Paint spotter
J40386
CTN QTY
1
• Cleaner, Primer & Cement all-in-one!
• No Mess – No Waste
• Spray Any Angle
• Goes twice as far as brush and
can method
• Work in a wider range of temperatures
PART NO.
S30800
S30801
S30802
S30803
DESCRIPTION
11 oz. with purple primer
4.5 oz. with purple primer
11 oz. with clear primer
4.5 oz. with clear primer
CTN. QTY.
12
12
12
12
Whitlam “Blue Magic” Pipe Joint
Compound
• ORM-D
• NSF Approved
• Slow set
• Meets FED spec TT-S-1732
• Use on plastic and metal threads
PART NO.
S95710
S95711
S96014
S96016
DESCRIPTION
1/2 pint brush top can joint compound
1 pint brush top can joint compound
1/4 pint joint compound
1 quart pipe joint compound
G
CTN QTY
24
12
24
12
Whitlam Seal Unyte
• Hard set
• Dark gray
• Semi-paste
• Use on all metal threaded connections and flanges
PART NO.
S95012
S95014
S96012
S95016
DESCRIPTION
1/2 pint Whitlam seal unyte
1/4 pint Whitlam seal unyte
1 pint Whitlam seal unyte
1 quart Whitlam seal unyte
CTN QTY
24
24
12
12
Whitlam “Select Unyte” Teflon Pipe
Joint Compound
• ORM-D
• NSF Approved
• Soft set, white virgin teflon (PTFE)
• Use on plastic and metal threads
• For use on air, steam, petroleum, water, gas and chemical lines
1/2 pint brush top can joint compound
S95712
1 pint brush top can joint compound
S95713
CTN QTY
24
12
301
Tools
Drain King® Mini Snake
Whitlam “Green Blaster” Drain
Opener
• ORM-D
• Dry granular composition for clearing grease, hair and other
organic matter from drains
• Non-acid - safe for chrome, polished brass, plastic and fixtures
• Safe for septic tanks
1 lb. canister drain opener
S95714
2 lb. canister drain opener
S95715
CTN QTY
24
12
Slic-tite® Heavy Duty Thread Sealing
Compound
• Working pressures: to 10,000
psi (liquids), 3,000 (gases)
• Temp: -50°F to +500°F
• Use for threaded connections on steel, aluminum, brass,
PVC, CPVC & ABS
G
8 fl. oz. Slic-tite® HD Thread Sealing Compound
S95011
Cool Gel®
CTN QTY
24
• Unclogs sinks, showers, bath drains & urinals
• Safe, easy to use
• No chemicals
PART NO.
D18190
1 qt. Cool Gel®
S95100
1 pt. Cool Gel®
S95101
CTN QTY
12
24
Visu-Glow Leak Detector
CTN. QTY.
36
A.C. Coil Cleaner
• No fumes
• Professional strength - non-corrosive citric
acid formula
• Ready to use - No mixing, no measuring,
no mess
• Convenient trigger sprayer
• Removes grease, oil and heavy soil
deposits
• Color coded liquid for quick and easy
product recognition
• ORM-D
y
Readse!
to U
For Interior Coils
PART NO.
S95721
• Protects surfaces and components
from heat damage such as piping,
drywall, and shower valves
• Used for any soldering or brazing job
• Safe, non-toxic, and harmless to the skin
• Will evaporate in 24-48 hrs. eliminating cleanup
• Unique gelling formula sticks to any surface without dripping or
running off
DESCRIPTION
Mini snake
DESCRIPTION
1 quart (RTU) A.C. Coil Cleaner
For Exterior Coils (also available as a concentrate)
PART NO.
S95722
S95725
DESCRIPTION
1 gallon (Conc) Cond. Coil Cleaner
1 gallon (RTU) Cond. Coil Cleaner
CTN QTY
4
4
Plumber’s Faucet And Valve Grease
• Lubricates faucet stems, threads, o-rings,
packing, gaskets
• Resists high temperatures
• Counter display
2.0 fl.oz. tins in counter display
S95709
• Fluorescent gas leak detector
CTN QTY
12
CTN QTY
12
Plumber’s Putty
8 oz. Visu-Glow Leak Detector
S95200
CTN QTY
24
Floweasy Drain Cleaner
• Organic digester; biodegradable
• Dissolves grease, hair, sanitary napkins, sludge, soap and
paper
• Environmentally safe
• ORM-D (S95701/S95703)
• HAZMAT (S95705)
PART NO.
S95701
S95703
S95704
S95705
302
DESCRIPTION
1 pint Floweasy drain cleaner
1 quart Floweasy drain cleaner
1/2 gallon Floweasy drain cleaner
1 gallon (HAZMAT) Floweasy drain cleaner
CTN QTY
12
12
6
4
• Use on sinks, strainers, faucets and other fixtures
wherever a non-drying watertight seal is needed
• DO NOT USE ON MARBLE OR PLASTIC!!!
• Meets Federal Specification TT-P-1536
14 oz. putty
P40014
5 lb. putty
P40080
CTN QTY
24
6
Plumber’s Epoxy Putty
• Seal leaks in sink traps, water tanks, pipe joints,
drain leaks and radiators
• Stop leaks in pools and drain lines
• Repair cracked porcelain wall tiles, floor tiles
and fixtures
4 oz. Epoxy putty tubes in counter display
P40004
CTN QTY
12
Tools
Plumber’s Goop Adhesive
• 3.7 oz. tube
• Watertight bond for use on PVC, tile or porcelain
• ORM-D
3.7 oz. tube plumber’s goop adhesive
J45100
2CanCaddy™
CTN QTY
12
• Grab and go handle
• Special velcro strap to keep cans organized and secure
• Works well with all size cans up to 32 oz.
• Made of extremely durable polymer
• Easily cleans, stain resistant and virtually indestructible
• Perfect for...Plumbers, Electricians, Painters & More
2CanCaddy™
S95015
CTN QTY
12
Steel Nipple Caddy Tray
• Steel construction
• Baked epoxy finish
• Push away handles
• Nipple storage range (close-6”)
PART NO.
N70050
N70075
N70016
N70020
N70024
N70032
SIZE
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
DIMENSIONS
10 1/2” x 7” x 6 1/2”
12 1/2” x 7” x 6 1/2”
14 1/8” x 7 3/4” x 6 1/2”
18” x 8” x 6 1/2”
19 1/2” x 6 1/2” x 6 1/2”
23 7/8” x 8 1/2” x 6 1/2”
CAPACITY CTN/MSTR
77 pieces
1/8
66 pieces
1/8
50 pieces
1/6
40 pieces
1/8
30 pieces
1/8
27 pieces
1/4
1/2” & 3/4” Combo Nipple Caddy
• Holds 39 1/2” x close-6”
• Holds 33 3/4” x close- 6”
• Steel construction with baked epoxy finish
• Fold over handle
PART NO.
N70575
DIMENSIONS
12 1/8” x 7” x 6 1/2”
DESCRIPTION
Combo Caddy
CTN/MSTR
1/8
Fitting Tote Tray
• Excellent for copper and PVC fittings
• Steel construction with baked epoxy finish
• Inside compartments measure 4 7/8” x 4 7/8” x 3 7/8”
• 8 compartments
• Fold over handle
PART NO.
N70500
DIMENSIONS
20” x 10 1/2” x 5”
DESCRIPTION
Fitting Caddy
CTN/MSTR
1/4
Plastic Nipple Caddy
SIZE
1/2”
3/4”
1”
1 1/2”
2”
DIMENSIONS
11” x 7 1/2” x 6 1/2”
13 1/4” x 7 7/8” x 6 1/2”
14 3/4” x 8 1/8” x 6 1/2”
21” x 7” x 6 1/2”
23 1/4” x 8 1/2” x 6 1/2”
• Lightweight, durable, high impact plastic
PART NO.
T60100
DIMENSIONS
10” x 15” x 5”
DESCRIPTION
Tote tray
T60122
T60121
T60124
T60123
PART NO.
T60121
T60122
T60123
T60124
T60125
T60126
T60127
DESCRIPTION
12” x 24” x 6” deep tray with 4 dividers
12 1/2” x 18” x 4 1/2” deep tray
Extra dividers for T60121
Bucket Caddies
T60101 Red Bucket with
Black Lid and Trays
T60103
T60104
T60108
PART NO.
T60101
T60102
T60103
T60104
T60105
T60106
T60107
T60108
T60110
T60111
• High density
polyethylene construction resistant
to acids, chemicals, oils and glues
• Removable dividers
• Reinforced metal handle
CTN QTY
5
10
10
5
4
4
4
G
• 5 gallon high-impact red
plastic bucket holds 4
combinations of trays- 3
large; 6 small; 1 large with 4
small; and 2 large with 2 small
• All trays have 4 sections; use tray subdividers to increase small tray capacity up to 8
sections
• Tool apron fits 5 and 3 1/2” gallon buckets;
apron straps on or can be permanently
secured (hardware included)
DESCRIPTION
5 gallon bucket with 6 small trays
5 gallon bucket with 1 large tray & 4 small trays
Large trays (4 1/2” deep)
Small trays (2 1/2” deep)
Lid for 5 gallon bucket
5 gallon bucket only
Subdividers for small trays (4 pack)
20-pocket tool apron
5 gallon bucket with 2 large and 2 small trays
5 gallon bucket with 3 large trays
CTN QTY
8
8
3
6
1
1
1
1
1
1
Anti-Vibration Synthetic Leather Gloves
• Neoprene knuckle protection
• Flexible 4-way stretch
• Sure GripTM reinforced thumb saddle
• Gel-padded Sure GripTM patch palm
• Machine-washable ParityTM
Nitrile Gloves
CAPACITY CTN QTY
77 pieces
4
66 pieces
4
50 pieces
4
30 pieces
2
27 pieces
2
CTN QTY
12
Tool Totes
Pair synthetic leather gloves
G50211
• High impact plastic
• Strong and lightweight
• Will not rust or corrode
• Nipple storage range (close-6”)
PART NO.
N70150
N70175
N70200
N70250
N70300
Utility Tote Tray
CTN QTY
72 pairs
• 3/4 coating offers more protection
• Micro foam nitril offers great grip
• Coating draws oil and water aside to allow
for enhanced grip
• Good abrasion resistance
• Silicone free and Antibacterial
Pair nitrile gloves
G50215
CTN QTY
144 pairs
303
Tools
Work Gloves
BROWN JERSEY GLOVE
• 100% Brown cotton
• One size fits all
• Knit wrist
• 8 ounce
Nemesis® Safety Glasses
LEATHER PALM WORK GLOVE
• Split leather palm, thumb,
fingers and knuckle
• 100% cotton back
and liner
• Safety cuff
• Soft-touch temples
• Light weight construction
• Single-lens wrap-around protection
• 99.9% UV resistant
• Meets ANSI Z87.1 + standards
Display
Glasses
G50200
G50210
COTTON GLOVES
with Rubber Grippers or Palms
• Durable 100% cotton canvas
• No-slip grip dots or rubber on palm
and fingers
• Knit wrist
G50204
G50214
DRIVERS’ STYLE LEATHER GLOVES
• Durable and long lasting - conforms
to your hand with time
• Grain leather glove
• Elastic cuff
G50205
G50206
G50208
G50218
G
CTN/MSTR
12/300
12/120
12/120
Display Carton Display-Each pair carded (Priced per Pair)
PART NO.
G50210
G50214
G50218
DESCRIPTION
Brown cotton jersey
Leather palm low safety cuff
Drivers’ style leather
CTN/MSTR
216 pair
96 pair
48 pair
Special Use Gloves-Bulk Only (Priced per Pair)
PART NO.
G50205
G50206
DESCRIPTION
White cotton with rubber grippers
White cotton with rubber palms
• Durable
• Excellent in wet conditions
• Protects hands during rugged jobs
CTN/MSTR
12/240
Vinyl Gloves
• 5 mil.
• Lightly powdered
• 100 reversible gloves (50 pair)
100 vinyl gloves
G50250
CTN/MSTR
1/10
• Ready to Hang or Place on Shelf
• Rolled cuff
• Lightly powdered for easy on and off
304
Clear
PART NO.
G30015
G30016
G30017
Smoke
DESCRIPTION
Hellraiser clear safety glasses
Hellraiser smoke safety glasses
Hellraiser blue mirror safety glasses
Blue Mirror
CTN QTY
12
12
12
Visio Safety Glasses
• One-piece frame
• Adjustable temples
• Sleek, lightweight and comfortable
• Meets ANSI z87.1
PART NO.
G30003
G30004
G30005
DESCRIPTION
Visio clear safety glasses
Visio blue mirror safety glasses
Visio silver indoor/outdoor glasses
CTN QTY
12
12
12
Clear Safety Goggles
• Direct ventilation
• Economical protection
Clear safety glasses
G30001
Vinyl Disposable Gloves
20 pack disposable gloves
G50251
CTN QTY
Includes: 12 pair Smoke Mirror, 6 pair Blue Mirror, 6
1
G30000
pair Clear, Free Display
Includes: 12 pair Camo/Bronze, Free Display
1
G30030
CTN/MSTR
12/240
12/240
All Purpose Latex Palm/Mesh Back Gloves
Latex palm/mesh back gloves
G50202
CTN QTY
12
12
12
12
Hellraiser Safety Glasses
Carded for Display (Priced per Pair)
DESCRIPTION
Brown cotton jersey
Leather palm low safety cuff
Drivers’ style leather
DESCRIPTION
Nemesis® Clear
Nemesis® Smoke Mirror
Nemesis® Blue Mirror
Nemesis® Camo/Bronze
Display
PART NO.
G50200
G50204
G50208
PART NO.
G30011
G30012
G30013
G30014
CTN QTY
200
Dust Masks
• 50 per box
• Disposable
• Non-toxic
Dust mask
G30021
CTN/MSTR
1/20
CTN/MSTR
1/20
Tools
Safety Hats
Protective Shoe Covers
• Fits sizes 6 1/2- 8
• Meets ANSI z89.1 requirement
• Short peak design creates greater upward visibility
• Comfortable 4-point suspension with terrycloth sweatbands
• Low nape strap and rain trough features
• Universal slots to accommodate hearing, welding and face
shield accessories
PART NO.
H40001
H40002
H40003
H40004
DESCRIPTION
Yellow with 4-point pin lock suspension
White with 4-point pin lock suspension
Yellow with 4-point ratchet suspension
White with 4-point ratchet suspension
CTN QTY
12
12
12
12
• Fits easily over work shoes and boots
• Elastic top allows fit up to size 12
• Keeps dirt and grime outside
• Carton holds 200 pieces (100 pair)
• SOLD BY FULL CARTON OR 10 PAIR PACK
Protective shoe covers
B05010
Protective shoe covers (10 pair)
B05011
Shubee Shoe Covers
• Dark blue
• Fits easily over work shoes and boots
• Elastic top allows fit up to size 12
• Keeps dirt and grime outside
• Carton holds 150 pair
Knee Pads
K01120
K012000
• Lightweight and water-resistant
• Comfortable while kneeling, standing or walking
• Won’t pinch or bind behind knee
• Soft, breathable inner lining for
coolness and comfort
• Velcro closures on straps
• Heavy duty knee cap on K012000
Heavy duty foam economy
K01120
K012000 Heavy duty knee cap
CTN QTY
1 pair
1 pair
CTN/MSTR
1/10
1/15
Shubee Shoe Covers
B05015
CTN QTY
1
Disposable Coverall
• Tear and puncture resistant
• Use when comfort and coolness is a priority
G
Industrial Back Supports
• Adjustable, comfortable support
promotes proper lifting techniques
PART NO.
S49601
S49602
S49603
DESCRIPTION
Medium 33-38” waist
Large 39-44” waist
X-Large 45-49” waist
CTN QTY
1
1
1
Ready Fit Corded Ear Plugs
CTN QTY
100
• Black UV rated for outdoor use
• UL Listed
CTN QTY
100 per bag
100 per bag
Cable Ties
• Standard size
• Nylon
Hornet & Wasp Spray
• Long range spray- shoots a stream up to 20 feet, reaching
nests far above ground, letting you keep a comfortable
distance from the nest
• Contains no CFCs which deplete the ozone layer
• ORM-D
20 oz. can hornet & wasp spray
J40393
CTN/MSTR
25
5/20
50 Pound UV Black Cable Tie
7” long
J40116
11” long
J401167
• Display box included
Ready fit corded ear plugs
E85000
Large disposable coverall
B05020
X-large disposable coverall
B05021
CTN QTY
12
Natural Color
Black
Natural Color
PART NO.
J40107
J40111
DESCRIPTION
7” long (1/16” - 1 3/4”)
11” regular (1/16” - 3”)
CTN/MSTR
100/6600
100/18700
DESCRIPTION
15” (5/16”)
CTN/MSTR
100/2300
Black
PART NO.
J40115
305
Tools
Cable Tie Assortment
• 400 pieces in kit: 100 pieces of 11”, 100 pieces of 7”, 200
pieces of 4”
Cable tie assortment
J40108
Duct Straps
CTN/MSTR
1/10
CTN QTY
50
Heavy Duty Utility Straps
G
• Made in the USA
• Plated S-hooks
• Meets or exceeds ASTM standards
• Weather and wear resistant
PART NO.
S20015
S20021
S20031
S20041
DESCRIPTION
15” Heavy duty utility strap
CTN QTY
25
25
25
25
Ratchet Tie Down Strap
CTN/MSTR
1/4
Camouflage Strap With Hooks
• 1” wide/300 lb. working load limit
• 2 hooks included with each strap;
pack of 4 ratchet straps
1” x 9’ Camo strap with hooks
S20301
2” x 27’ Ratchet strap with step release J-hooks
S20302
CTN/MSTR
1/8
• 1” wide / 750# test nylon straps
• All colored straps and threads are UV resistant
• Straps are secured by a heavy duty zinc plated metal cam buckle, which will not
slip even in wet conditions
• Ideal for handling loads for all kinds of contractor needs
• Call for details about Cam Strap Display
• S20999 Display includes: One 2’ x 2’ peg board, Six peg hooks and reorder cards,
1 Display header card, Includes an assortment of 72 straps
PART NO.
S20100
S20101
S20102
S20103
S20104
S20105
S20106
S20999
DESCRIPTION
1” x 2’ Black
1” x 4’ Red
1” x 6’ Yellow
1” x 8’ Green
1” x 10’ Blue
1” x 12’ Purple
1” x 20’ Black
Cam Straps Display
CTN/MSTR
24/144
24/144
24/144
24/144
24/144
24/144
24/144
1
Twin Packs
• 1” wide/400 lb. working load limit
• Comfort grip handles
• Weather and corrosion resistant
• PVC coated hooks that will not scratch
• Cut and abrasion resistant webbing
1” x 16’ Ratchet tie down strap
S20300
• 2” wide/ 3,333 lb. working load limit
• Step by step release action
• Gradually releases tension with double J-hook
• Flex grip handle
Cam Strap
• HVAC application
• Natural nylon
• Up to 10” diameter
34” Duct straps
J40134
Ratchet Strap With Step Release
J-Hooks
CTN/MSTR
1/6
PART NO.
S20200
S20201
S20202
S20203
S20204
DESCRIPTION
1” x 2’ Black - Twin Pack
1” x 4’ Red - Twin Pack
1” x 6’ Yellow - Twin Pack
1’x 8’ Green - Twin Pack
1” x 10’ Blue - Twin Pack
CTN QTY
1
1
1
1
1
3-N-1 Tubing Bender
• For 1/4”, 5/16” or 3/8” tubing
3-N-1 tubing bender
T50001
CTN/MSTR
10/20
Spring Tubing Bender
• Spring prevents collapse of the wall at bending point
• Allows fast free-form bending of soft copper and aluminum
tube
PART NO.
J41030
J41031
J41032
306
DESCRIPTION
3/8” spring tubing bender
CTN QTY
1
1
1
Tools
WD-40® Lubricant
Gas Line Marking Labels
• Yellow self adhesive stickers
• Clearly identifies gas lines from
other utility and water lines
• 100 labels per roll
• Cleans
• Protects against rust and corrosion
• Lubricates
• ORM-D
• Penetrates stuck metal parts
• Displaces moisture
8 oz. can lubricant
S95700
CTN QTY
12
2 PSI gas line stickers
J40481
Gas line stickers
J40482
E-Z Light
• Extendable for lighting flames from a distance
• Safe and convenient for torch, fireplace, or any hard-toreach area
Soap Stones And Holders
• ROUND- Pen size lightweight aluminum
holder with built-in chuck
• FLAT- Stainless steel spring tension with
locknut
• Soap stones sold in carton quantities only
PART NO.
J40060
J40061
J40062
J40063
DESCRIPTION
Round soap stone holder
Flat soap stone holder
Round soap stone
Flat soap stone
CTN QTY
6
6
144/box
144/box
E-Z Light
J40450
• Solid brass
• Removable tip
• Extendable, magnetized arm for easy retrieval of small
metal parts
• Great for shop or job site
CTN QTY
1
• Makes hard-to-reach areas accessible using retractable
fingers
CTN/MSTR
10/80
1
G04001:
• 500 PSI burst strength
• Kink-free construction
• Heavy-duty solid brass nickel plated coupling
• Built-in spring at faucet end to prevent hose damage
• Nylon reinforced
24” Grab-it tool
J40020
CTN QTY
6
6
6
CTN/MSTR
1/50
Steel Wool
• Packaged 16 pads per bag, 12
bags per carton
• Priced per bag
G04002 and G04000:
• 300 PSI burst strength
• Solid brass couplings
• Reinforced green nylon construction
DESCRIPTION
5/8” x 60’ (500 PSI) garden hose
G
24” Grab-It Tool
Garden Hoses
PART NO.
G04001
G04002
G04000
CTN QTY
1
E-Z Reach
E-Z Reach
J40451
Brass Plumb Bob
8 oz. brass plumb bob
J42008
12 oz. brass plumb bob
J42012
CTN/MSTR
1/100
1/100
Size 00 steel wool
B29300
Size 0 steel wool
B29310
CTN QTY
12
12
Plumber’s Candle
Caution Tape
• Black print on safety yellow
• 3 mil thickness
3” x 300’
J43300
3” x 1000’
J43310
CTN/MSTR
1/16
1/8
1 1/8” x 5”
J46118
CTN QTY
120
307
Tools
Copper Cleaning Pads
Torpedo Level
• Reusable
• Use wet or dry - will not clog
• Nylon impregnated fine maroon
• Good general cleaner for removing rust, corrosion, etc.
• Deoxidizes and cleans copper tube and fittings for soldering
PART NO.
B29400
SIZE
4” x 6 1/4” x 1/4”
CTN/MSTR
10/710
Acid Brushes
• Manufactured to rigid requirements
• Professional quality
• Aluminum construction
• Magnetic sides
• 7 1/2” length
Torpedo level
J40100
Plastic Magnetic Level
• Tin handle
PART NO.
B29700
B29701
B29702
B29699
SIZE
3/8” x 6”
1/2” x 6”
9/16” x 6”
1/4” x 3”
• Has front vial viewer
• Saves time and money
• Eliminates neck and back strain
• Internal aluminum frame for accuracy and strength
• Magnetic
• Integrated Euroslot hanging hole
CTN/MSTR
144/1728
144/1428
144/1008
144/1428
10” Plastic magnetic level
J42101
• Ideal for use with pipe cleaners, thread cutting oil, paint,
pipe dope
SIZE
1”
2”
CTN/MSTR
36
24/432
• The ultimate plumbing level
• Set accurate slopes of 1 and 2 percent
• Includes conversion of pitch and slope
• Accuracy: 0.5mm/ M-0.029” on all vials
• Length: 60cm/24”
• U.S. patent 6,209,211
24” length gradient level
J42200
PART NO.
B29900
SIZE
1”
• Contractor grade construction
• Sure grip rubber handles
F20016
CTN/MSTR
12/72
Lead Joint Runners
308
DESCRIPTION
#1 - 2” - 4” pipe size
#2 - 4” - 6” pipe size
#3 - 6” - 10” pipe size
#4 - 10” - 14” pipe size
#5 - 16” - 20” pipe size
#6 - 20” - 24” pipe size
#7 - 24” - 30” pipe size
#8 - 30” - 36” pipe size
#9 - 36” - 42” pipe size
#10 - up to 48” pipe size
CTN QTY
10
10
5
1
1
1
1
1
1
1
F20017
Flashlight for AA batteries
F20016
Flashlight for D batteries
F20017
CTN QTY
6
6
Rayovac Floating Lantern & Battery
F20003
PART NO.
L42011
L42012
L42013
L42014
L42015
L42016
L42017
L42018
L42019
L42023
CTN/MSTR
1/6
Industrial Swivel-Lite Flashlights
Wire Brush
• For cleaning rough surfaces
• Stiff steel wire bristle
• Polished hardwood handle
CTN/MSTR
1/6
Top Grade Gradient Level
Brush
G Paint And Dope
• Natural bristles
PART NO.
B29801
B29802
CTN/MSTR
1/10
F20004
F20005
• 6-volt F20004 battery included
• Heavy duty battery priced each
PART NO.
F20003
F20004
F20005
DESCRIPTION
Floating lantern with battery
6 volt spring top - battery only
6 volt screw top - battery only
CTN QTY
6
12
4
Tools
Rayovac Industrial Flashlights
Cutting Oil
• Yellow flashlights with ring hangers
2 cell D size flashlight
F20001
3 cell D size flashlight
F20002
• Medium brown color
CTN QTY
6
6
• Contractor grade construction
• Krypton bulb, spare bulb holder
• Floats in water (with beam up)
• Long range beam
• 45° swivel for hands-free use
• Comfort-grip handle, push-button switch
• No batteries included
• Can use 6V lantern battery for additional power
4D/ 6-Volt Swivel-Lite
F20018
CTN/MSTR
1/6
• New technology unique 3-way hands-free
L.E.D. system
• Close range use super white L.E.D., “Night
vision” 2 super red L.E.D., Long range beamkrypton bulb
• Batteries last 20 times longer with L.E.D. bulbs
than normal bulbs
• Rubber spot-flood reflector, head rotates 180°
compact design, comfort-grip band
• Weatherproof, heavy duty construction
Sportsman L.E.D. Head-Lite
F20019
CTN/MSTR
1/4
Rayovac Heavy Duty Industrial
Batteries
• List price is for each battery
• PACK QUANTITIES ONLY
Heavy duty C batteries
F20006
Heavy duty D batteries
F20007
• 10 x 12 pre-moistened towels; 50 count
• Lower price per tub
• Conveniently sized tub
• All of the towels can be used before they dry out
50-count dispenser tub
B05007
Wypall display (32 tubs)
B05008
CTN QTY
8
1
Wypall® Teri® Towels
Sportsman L.E.D. Head-Lite
CTN/MSTR
6/72
6/72
Rayovac Heavy Duty Alkaline
Industrial Batteries
• List price is for each battery
• PACK QUANTITIES ONLY
DESCRIPTION
AAA alkaline batteries
AA alkaline batteries
9 volt alkaline batteries
C alkaline batteries
D alkaline batteries
CTN QTY
6
Wypall® Waterless Hand Wipes
4 D/6 Volt Swivel-Lite
PART NO.
F20012
F20008
F20009
F20010
F20011
Premium all-purpose oil (gallon)
J45005
CTN/MSTR
8/96
6/96
6/72
6/72
6/72
• Strong and durable, wet or dry
• 125 reusable sheets per boxequivalent to 18 lbs. of rags
• Reinforced HYDROKNIT® provides extra scrubbing power
• CASE QUANTITIES ONLY
9 3/4” x 16 3/4” x 125 sheets
B05003
G
CTN QTY
10
Wypall® Waterless Hand Wipes
• Full-sized pre-moistened hand towels- smooth for wiping
on one side, tough for scrubbing on the other
• Natural d’limonene cleaning agent tough on grease, grime,
ink & paint
• CASE QUANTITIES ONLY
12” x 12” x 75 sheets
B05002
CTN QTY
6
Box of Rags
• Colored cotton sweatshirt material
• 100% recycled
• Pull out dispensing
4 lb. box of rags
B05001
CTN QTY
1
Poly Sheeting
• Clear
• 4 mil super tough plastic
• Hundreds of uses
8’ x 100’ poly sheeting
S08100
10’ x 100’ poly sheeting
S10100
CTN QTY
1
1
309
Tools
Cotton Plumbers Handy Towels
Garbage Disposal Cords
• 100% cotton heavy duty shop towels are washable, reusable & nonabrasive
• Ideal for cleaning hands, wiping spills, removing grime from
tools & parts
• 12 towels per bag
Plumbers handy towels
B05004
CTN QTY
12
Commercial Sponges
• Commercial grade cellulose
sponges- made to last!
• Deeply textured top makes
cleanup easier
DIMENSIONS
S50001
6-3/4” x 4-3/8” x 3/4”
S50002
8” x 4-1/2” x 3/4”
Medium Cellulose sponge
S50001
Large Cellulose sponge
S50002
G
CTN QTY
24
24
• Medium duty 1 mil plastic
• Convenient pleat fold pack design
• Protects furniture, appliances and carpets
CTN/MSTR
1/48
Trash Bags
• Hundreds of uses
• Keep the jobsite clean
G02042
G02033
42 gallon 3 mil. / 10 per bag
G02042
33 gallon .95 mil / 40 per box
G02033
CTN QTY
6
6
• Economical to use for leak testing when filled with soapy
water
• Clear bottle with various color tints based on availability
310
PART NO.
E25015
E25016
E25017
E25018
E25017
E25018
DESCRIPTION
3’ straight disposal cord
6’ straight disposal cord
3’ angle disposal cord
6’ angle disposal cord
CTN QTY
50
50
50
50
• Complete with 3 wire nuts and connector coupling
• 16/3 gauge wire
• Polybagged
PART NO.
E25115
E25116
E25117
E25118
DESCRIPTION
Kit for 3’ cord w/ straight plug
Kit for 6’ cord w/ straight plug
Kit for 3’ cord w/ angle plug
Kit for 6’ cord w/ angle plug
CTN QTY
6
6
6
6
Screw-On Wire Connectors
• Clamshell Packaging
• Ready to Hang!
PART NO.
E25125
E25126
E25127
E25128
E25129
DESCRIPTION
Gray
Blue
Orange
Yellow
Red
CTN QTY
100
100
100
100
50
Leak Alert Water Detector
• Loud alarm sounds with direct water contact
• Floats and signals for up to 72 hours
• Fully automatic operation - no wiring required
• Low battery indicator for optimum safety and performance
Spray Bottle
16 oz. clear spray bottle
B25001
E25015
E25016
Garbage Disposal Wiring Kits
Plastic Drop Cloth
9’ x 12’ plastic drop cloth
D50000
• 16/3 gauge wire
Leak alert water detector
L95400
CTN/MSTR
1/12
CTN/MSTR
1/60

Jones Stephens Corp. • PlumBest™ • LTConnections™

Transcription

Similar documents

INSIDE OUTSIDE BACKROOM

Vinyl Composition Tile

Saebo Long Term Care Program

Rapid Clean Geelong

Alu-Rex Pro Series Brochure

Commercial Tile

Saebo Evaluation and Treatment Kit

march madness! - Office Supply Centre

NCLI Merchandise - Pheasants Forever

For HOTEL SOLUTIONS - Sangyug Enterprises Ltd