Forks • Bale Handling • Pallet Forks • Grain Pushers • Safety

• Buckets
• Forks
• Bale Handling
• Pallet Forks
• Grain Pushers
• Safety Access Platforms
• Pick Up Hitches
• Headstocks/Adaptor Plates
• Headstock Conversions
• Snow Ploughs
• Weight Boxes
• Bag Lifters
• Brackets
• Trailers
www.middevonmachinery.co.uk
• British built in our
Oxfordshire factory
Telehandler Rehandling Buckets
• Each bucket is designed and
manufactured specifically for
the machine for which it is
ordered, ensuring optimum
dump and crowd angles
• Our robust and unique
design incorporates side
stiffeners, extra wear plates,
integral spill guard and 150 x
12mm flat straps that
surround all buckets for
maximum strength and
durability
• Brackets included and
bespoke designs available
All buckets fitted with a hardened steel leading
edge (bolt on and other options available)
Rolled Back
• British built in our
Oxfordshire factory
Loader Rehandling Buckets
• Each bucket is designed and
manufactured specifically for
the machine for which it is
ordered, ensuring optimum
dump and crowd angles
• Our robust and unique
design incorporates side
stiffeners, extra wear plates,
integral spill guard and 150 x
12mm flat straps that
surround all buckets for
maximum strength and
durability
• Brackets included with
bespoke designs available
k
Designed specifically for tractor
loaders and skidsteers
• British built in our
Oxfordshire factory
• Each bucket is designed and
manufactured specifically for
the JCB Teletruck range,
ensure perfect crowd and
dump capabilities
• Our robust and unique
design incorporates side
stiffeners, extra wear plates,
integral spill guard and 150 x
12mm flat straps that
surround all buckets for
maximum strength and
durability
• Brackets included
T
JCB Teletruck Rehandling
Buckets
Designed specifically for the JCB
Teletruck range
- Model : CB01FE1500
-1500mm Wide
- 0.60 cu/m Capacity
- Fits both 1200mm and 1100mm carriages
- Quick Release Teletruck Brackets as standard
- Bolt on Toe Plates Available
• British built in our
Oxfordshire factory
Grain Buckets
• Each bucket is designed and
manufactured specifically for
the machine for which it is
ordered, ensuring optimum
dump and crowd angles
• Our robust and unique
design incorporates side
stiffeners, extra wear plates,
integral spill guard and 150 x
12mm flat straps that
surround all buckets for
maximum strength and
durability
• Brackets included and
bespoke designs available
k
Our Grain Buckets are longer in the base to
allow a greater load when crowded back
• British built in our
Oxfordshire factory
Potato/Low Profile Buckets
• Each bucket is designed and
manufactured specifically for
the machine for which it is
ordered, ensuring optimum
dump and crowd angles
• Our robust and unique
design incorporates side
stiffeners, extra wear plates,
integral spill guard and 150 x
12mm flat straps that
surround all buckets for
maximum strength and
durability
• Long base for greater load
and reduction on crop damage
Tk
25mm round bar
edges
Removable side panels can be
added upon request to help
reduce crop damage
• British built in our
Oxfordshire factory
Toe Tip Buckets
• Suitable for use on a variety
of Loaders where increased
lift height i.e. loading grain
lorries is required. Cycle
times with Telehandlers can
also be reduced
• This proven design is
manufactured using only tried
and tested, quality materials.
• Available with single or twin
ram operation to suit your
individual requirements
• Welded hardened steel
leading edge as standard
k
Brackets and Hoses included
• British built in our
Oxfordshire factory
• Designed with the recycling
industry in mind, this heavy
duty, large capacity bucket is
fitted with a bolt on toe
plate, side gussets and a
heavy duty hardox grab as
standard
Heavy Duty Rehandling Bucket
With Claw
• Options include mesh on the
grab, filled in grab to form
shell and a spilt grab which
allows the two halves to open
separately
• Bespoke designs are
welcomed
k
Brackets and Hoses included
• British built in our
Oxfordshire factory
• Our robust design is
manufactured making use of a
hardened leading edge, side
gussets, integrated spill guard
and side stiffeners
• Standard specification
includes the option of a bolt
on reversible toe plate or
digging teeth
• Each bucket is designed and
manufactured specifically for
the machine for which it is
ordered, ensuring optimum
dump and crowd angles
Tel:
Heavy Duty Digging Buckets
Brackets Included
• British built in our
Oxfordshire factory
• Our superior heavy duty
design is built with many
features including a hardened
steel wear plate, 15mm side
panels and removable cheek
plates
• The top grab is operated by
two large hydraulic cylinders.
The tines can by Kvernaland
style or profile cut from
hardox steel
• Brackets, hoses and bolt on
reversible toe plate included
as standard
Tk
Multi Purpose Buckets
Other sizes are
available on
request. Just ask
our Sales Team
• British built in our
Oxfordshire factory
• Each bucket is designed and
manufactured specifically for
the machine for which it is
ordered, ensuring optimum
dump and crowd angles
• Can be used as a:-
Bucket
Grab/Clamp
Grader
Digger
• Twin ram operated
• Hydraulic hoses and brackets
included
Telk
Four in One Buckets
• British built in our
Oxfordshire factory
• Tubing fork back offers
increased visibility
• Choice of 3 fork tines
available
• Brackets included
• Upgrades available,
including replacement bottom
box section ‘denture’
• Full or half In filled middle
available to protect headstock
• Bespoke designs available
upon request
k
Manure Forks
• British built in our
Oxfordshire factory
• Tubing fork back offers
increased visibility
• Choice of 3 fork tines
available
• Brackets included
• ‘Upright’ back ensures
optimum working angles for
tractor loaders
• Full or half In filled middle
available to protect headstock
• Bespoke designs available
upon request
Tel: k
Loader/Skid Steer Forks
• British built in our
Oxfordshire factory
• Heavy duty design for large
3t plus Telehandlers
• Twin ram design
• Choice of 3 fork tines and 2
grab tines
• Full and half In filled
middles available
• Tubing fork offers increased
visibility
• Hoses and brackets Included
• Heavy duty grab
uk
Telehandler Manure Fork/Grab
For 3T Plus
Machines
• British built in our
Oxfordshire factory
• Heavy duty design for large
4t plus Telehandlers
• Twin ram design
• Choice of 3 fork tines and 2
grab tines
• Full and half In filled
middles available
• Tubing fork offers increased
visibility
• Hoses and brackets Included
• Heavy duty grab
Tk
Telehandler Manure Fork/Grab
For 4T Plus
Machines
• British built in our
Oxfordshire factory
• Designed for smaller
Telehandlers
• Twin ram design
• Choice of 3 fork tines and 2
grab tines
• Full and half In filled
middles available
• Tubing fork offers increased
visibility
• Hoses and brackets Included
• Replacement parts available
k
Telehandler Manure Fork/Grab
• British built in our
Oxfordshire factory
• Designed to fit loaders and
skidsteers
• Twin ram design
• KV style tines
• Brackets and hoses included
• Angle of fork is designed
specifically to provide
optimum crowd and dump
• Replacement pins and parts
available
k
Loader/Skidsteer Fork/Grab
• British built in our
Oxfordshire factory
• Single ram design
• Designed for light silage
work
• KV style tines as standard
• Brackets and hoses included
• Replacement pins and parts
available
• Made specifically for use on
small loaders and skidsteers
Loader/Skidsteer Fork/Grab
Single Ram
• British built in our
Oxfordshire factory
• 20mm thick profile cut arms
in grapple
• Two tube bars to strengthen
arms in grapple
• Tube style fork for increased
visibility
• Twin ram
• Choice of 3 fork tines
• Hoses and brackets included
• Bespoke designs available on
request
Telehandler Manure Fork/Grapple
• British built in our
Oxfordshire factory
• Weld mesh push offer cover
length of buck rake
• Choice of 3 tines available
• Extras include 3 point
linkage, side tines and power
grab
• Brackets, hoses and valve
included
• ‘Hollow’ back design ensures
weight is kept down, allowing
for a greater load to be
transported
Telk
Parallel Push Off Buck Rake
• British built in our
Oxfordshire factory
• Weld mesh push offer cover
length of buck rake
• Choice of 3 tines available
• Extras include 3 point
linkage, side tines and power
grab
• Brackets, hoses and valve
included
• ‘Hollow’ back design ensures
weight is kept down, allowing
for a greater load to be
transported
Tel: 01608 678 197 Fax: 01608 677 778
www.cherryproducts.co.uk
Parallel Push Off Buck Rake
• British built in our
Oxfordshire factory
• Designed to lift 40 stacked
bales
• Pressure release valve
• Brackets and hoses included
• Heavy duty design
• High quality twin ram
operation ensures a secure
grip on the bales being
manoeuvred
• Bespoke designs available to
suit your individual
requirements
Telk
40 Bale Squeezer
• British built in our
Oxfordshire factory
• This top selling bale grab is
suitable for use on anything
from a front end tractor
loader to large telehandlers
• As with all Cherry
Attachments brackets and
hoses are included
• Suitable for use on round
and rectangular bales
• Perfect for stacking bales
onto trailers
• For further information,
please contact our sales office
Over Arm Wrapped Bale
Handler
• British built in our
Oxfordshire factory
• This top selling bale grab is
suitable for use on anything
from a front end tractor
loader to large telehandlers
• As with all Cherry
Attachments brackets and
hoses are included
• Suitable for use on round
and rectangular bales
• Perfect for stacking bales
onto trailers
• For further information,
please contact our sales office
Tel: 01608 678 197 Fax: 01608 677 778
www.cherryproducts.co.uk
Over Arm Wrapped Bale
Handler
• British built in our
Oxfordshire factory
• This top selling bale grab is
suitable for use on Large Fore
End Loaders and Telehandlers
• As with all Cherry
Attachments brackets and
hoses are included
• Suitable for use on up to 2
Large Round Bales and up to 3
Large Heston Bales
• Perfect for stacking bales
onto trailers
• For further information,
please contact our sales office
uk
Multi Bale Handler
CH30
• British built in our
Oxfordshire factory
Bale Spikes
• Retractable adjustable
extensions on some models
• Folding tines ensure safety
when in road transit
• KV style tines with many
combinations available to suit
your needs
• 80 x 80 x 5mm box section
frame
• Brackets included
• Built specifically for type of
bales being used
Tel:
Folding Tines available upon
request
• British built in our
Oxfordshire factory
Bale Handling Equipment
• Claw tines ensure tight pick
up
• Tines close simultaneously
• Built specifically for the type
of bales being used
• Removable guide rail fits
both sides
• Strengthening box section
beams run length of grab
• Brackets and hoses included
Any questions about which
model is right? Please call our
sales office with the bale type or
sizes and we will be happy to
discus which model will suit your
needs.
Tel
• British built in our
Oxfordshire factory
Grain Pushers
• Efficiently increase the
capacity of your grain store
with this attachment
• Standard spec. 7ft x 5mm
front blade with 12mm thick
base
• Rubber edge available
• Frame/Headstock extensions
available – please contact our
sales office for information
• Brackets included
• Special sizes available
Tk
Working on wood? If so, ask
about our CPRE rubber edge
• British built in our
Oxfordshire factory
Safety Access Platform
• Safely perform all high level
maintenance with a Cherry
Access Platform
• Conforms to all CE
regulations
• Weld mesh back
• Safety stickers included
• Comes with brackets or tine
mounts as standard
• Non slip chequer plate floor
• Painted Yellow
T
Harness kits available
• British built in our
Oxfordshire factory
Big Bag Lifters
• Manufactured to comply
with all health and safety
regulations (supplied with CE
certificate of declaration)
• Models to suit all bag sizes
• Brackets included
• Raised arms make unloading
curtain sided lorries
straightforward (with no risk
of hitting the lorry roof)
• Please note, pallet tines are
not recommended for
transporting fertilizer bags
k
Unique ‘stoppers’ reduce the chance of
bags slipping
• British built in our
Oxfordshire factory
• Ideal for clearing heavy
snow in driveways, car parks,
yards and small roads
• 3000 x 1500 x 10mm plate
• 4ft high, bracket fixing
• CBSP10000ADJ manually
adjustable to 3 angles
• Rubber edge included
• Adjustable castors
• Optional wheels on Castors
Tel: 01608 678 197 Fax: 01608 677 778
www.cherryproducts.co.uk
Snow Ploughs
• British built in our
Oxfordshire factory
• Ideal for clearing heavy
snow in driveways, car parks,
yards
• Doubled up 2500 x 1250 x
5mm plate
• 2ft High, bracket fixing
• CBSP8000ADJ manually
adjustable to 3 angles
• Rubber edge included
• Lifting eyes
• Optional Castor Wheels
k
Snow Blades
• British built in our
Oxfordshire factory
Weight/Tool Boxes
• Three point linkage
• Gas strut lid
• Rubber mat floor
• Pad lock point
• Choice of colours
• Empty weight 900kg
• Potential weight 3000kg
• Bespoke designs available
• Many extras
A lighter weight
version is now
available
• British built in our
Oxfordshire factory
• Single ram operated
• 2tonne lift capacity
• 10tonne tow capacity
• Box section frame
• Full parts list available
• Telehandler and Forage
Harvester options
• Available for other
machines, please contact our
Sales Office for details on
John Deere and Manitou
Models
Pick Up Hitches
Headstocks
• British built in our
Oxfordshire factory
• Hydraulic or manual options
available
• Push through pin for manual
option
• Over centre handle available
on request
• Direct fit onto boom of
machine
• Can be designed to be pick
up attachments with different
brackets to machine
• Spare parts available
Tel: 01608 678 197 Fax: 01608 677 778
www.cherryproducts.co.uk
CAT to JCB Q Fit
JCB Tool Carrier HYD
Any questions?
Please contact us and we
will be happy to send out
diagrams, pictures and
information to make sure
you get the right headstock,
to fit your machine and
attachments
Adaptor Plates
• British built in our
Oxfordshire factory
• Hydraulic or manual options
• Push through pin for manual
option
• Over centre handle available
on request
Euro 8 to Farmhand
Euro 8 to Farmhand
• Easy to fit and use
• Many combinations available
– we can manufacture adaptor
plates to fit most headstock
types and pick up almost
every variety of brackets
Matbro to JCB Q Fit
• Spare parts available
Euro 8 to Manitou
Tel: 01608 678 197 Fax: 01608 677 778
www.cherryproducts.co.uk
Adaptor Plates fit onto your
existing headstock and allow
you to pick up attachments with
different brackets on them. If all
of you attachments have
different brackets to your
headstock, we advise you to
have a headstock conversion
instead of an adaptor plate
• Conversion of your
headstock so it will pick up
attachments with different
brackets
Headstock Conversions
Merlo to Matbro
• Hydraulic or manual locking
options available
• Push through pin for manual
option
Merlo to Manitou
• Over centre handle available
on request
• Direct fit onto boom of
machine
• Many combinations available
Stoll to JCB Q Fit
• Spare parts available
Tel: 01608 678 197 Fax: 01608 677 778
www.cherryproducts.co.uk
CAT to JCB Q Fit
Any questions about headstock
conversions? Please contact
us and will be happy to go
through the process and the
combinations available. We
can also explain how a
headstock conversion will
effect which pallet tines can be
used
• Suitable for telehandlers and
loaders of all sizes
• Allows quick use of forks
Pallet Fork Carriages and Tines
CP40 Pallet Fork Carriage w/ ITAIIIB
Forks
CP41 Pallet Fork Carriage
• Many combinations available
• CP32 allows Merlo tines to be
used on a Merlo headstock
conversion
CP32
• ITAII = 16’’ between top and
bottom rail
• ITAIII = 20’’ between top and
bottom rail
• Class A forks run parallel with
bottom rail
• Class B forks have 6-8’’ drop
from bottom rail to fork
Tel: 01608 678 197 Fax: 01608 677 778
www.cherryproducts.co.uk
Any questions about Pallet Fork
Carriages and Tines?
Please contact our Sales Office and we
will happy to discuss which option will
best suit your machine and your material
handling jobs. Please note, although
our carriages and forks are rated, the
lift capacity of the machine must
never be exceeded.
• Bespoke designs welcomed
• We will go through the
design process with you,
keeping you updated every
step of the way
• Innovative designs to solve
your individual materials
handling problems
• We welcome jobs to make
your designs come to life or
we can design them ourselves
with our CAD system
• All attachments backed up
by our full warranty
• Guarantied satisfaction
Tel: 01608 678 197 Fax: 01608 677 778
www.cherryproducts.co.uk
Bespoke Designs