Premium Line Service Valves

Transcription

lndustry Compliance
Access fittings manufactured and
sold by C&D Valve meet ARI
Standard 720-2002 and are
manufactured and packaged
in the U.S.A.
Guarantee
C&D Valve products are
unconditionally warranted
against detective material
and workmanship, and will
perform to complete
satisfaction when used
with our instructions.
Custom Parts
C&D Valve has the ability to customize parts to meet special
requirements. Combine an existing brass body from our
wide selection ... ar a new one with tu bes of different sizes,
bent, swagged and flared.
P/easecontact us for more information at
1-800-654-9233 or [email protected]
www.cdvalve.com
•G>N
iliENTS
PremiumLineServiceValves ...........
. .. . . . ...... . .. Page 4
StandardLineServiceValves . .. . . . .. .. . . .. . . ..... . . . . Page 5
EconomyLineServiceValves ..........................
BrassAccessBodies ...........
Page 5
. . ..... .... . . ..... . . . ... Page 6
CopperAccessTees .......................
. ..... . . . ... Page 7
Braze-OnServiceValves . .. ..... .. ..... .... . . . ..... Pages 8, 12
Cla_mp-On
ServiceValves . . .. .. .. . . ... .. ... .. ..... .. ... Page 9
BV-CRT's
and ServiceTools ... . . .... .. .... .. ..... . .... Page 1o
CoreRemovalTools ..... . .... . . . .... . .. .. . . .. ... . . .. . Page 11
CRTAccessories.. .. ..... . .... . . . ..... .. .. . . .. ... . . .. . Page 12
SuperheatKits .. .... ... . . .. .. . . . .. .. .. . . . ... . .. . . . . .. Page 13
ServiceKits .... .. .... . .. ..... .. ..........
.. ..... . .... Page 13
CoreDepressors . ...... . ..... .. ..... . .... .. ..... . .... Page 14
"SureSeal"RetainingCouplers. .... ... ... . . .. ... . . ... Page 14
Adapters/Couplers .... . ..... .. ..... . .... .. .... . .. ... Page 15
TeeConnectors . . .. ... . ...... . . . . . .. . .... . . .. . . . . .. . . Page 16
Other Connectors..... .. ..... .. .. . .. . .... . . ... . . . .... Page 17
BlowerWheel Pullers.. .. ..................
"FasTap"
Pliers.. ..............
.. .... .. ... Page 18
. .... .. . ... . . ..... . . .... Page 18
LockingCapsand Keys . ..... .. ... .... . . . ...... . ..... Page 19
Oil Cap/CapTubes/CoreHolders ...... . . . ...... . ..... Page 20
Caps/Parts/0-Rings.......................
Productlndex .........................
. ... .. . . ... Page 21
.. ..........
.. . Page 22
Termsand Conditionsof Sale .. .... ... ... . . ... .... .. . Page 23
Warning: Safety glassesshould alwaysbe worn when working with refrigerants.
Contact with refrigerants may causeinjury.
© copyright 2015 C&DValve,LLC
Manufacturedand packagedin U.S.A.
Premium Line ServiceVa/ves
PART#CD3434 PKGQTY: 6
3/ 16" coppert ubing , 1/8 " coppe r
bu shin g, wrench cap and core
PART# CD3436 PKG QTY: 6
1/4" copper tubing , 3/16" copper
bu shin g, wrench cap and core
PART# CD3456 PKGQTY: 6
5/ 16" coppertubing , 1/ 4" copper
bu shing , wrench cap and core
1/4" copper tubing, 3/16" & 1/8"
copper bushings, w rench cap
and core
3/16" copper tub ing, w rench cap
and core
1/ 4" copper tu bing , w rench cap
and core
1/8" copper tu bing, wrenc h cap
and core
PART# CD3688 PKGQTY : 25
1/8" 10 ho le, 3/ 16: 1/ 4'; 5/ 16"step s
Used with T36 Series.
2 lock nut s include d wit h
packaged access valves.
1/ 8" MPT belo w hex w rench cap and core
CD3600 val ve can be adap ted t o serve
yo u in the follo w ing w ays:
1/ 8"
copp ertube
5/ 16"
coppertube
i
1
1
1
1 1
1/ 4"
coppe rtu be
1/ 2"
copper tub e
,,---r:r-n
\J
!. ______
1
1
1
1
1
1
3/ 8"
coppe r tube
\I,
braze 3/16" t ip
into 1/ 4" line
or larger
Standard Line Service Valve
PART#CD1010 PKG QTY:6
1/8" copper tubing
wrench cap and core
PART#CD1212 PKG QTY: 6
3/ 16" copper tubing
wrench cap and core
1/ 4" copper tubing
wren ch cap and core
5/16" copper tubing
wrench cap and core
3/ 8" copper tubing
wrench cap and core
1/8 " ID hole, 3/ 16'; 1/ 4'; 5/ 16" steps
wren ch cap and core
Economy Line Service Valve
1/8 " coppertubing
cap and core
cap and core
1/4" copper tubing
cap and core
cap and core
3/ 8" copper tubing
cap and core
1/ 8" ID hole, 3/ 16'; 1/ 4'; 5/ 16" steps
CD2245 cap and core
3/ 16" IDho le,
1/4: 5/ 16" OD steps
PART#CD1960 PKGQTY:6
Fiare 9/ 16"1ong, Hex 7/16 "deep , 1/4"0D step
1/4" ID hole, 1/4" ,
5/16" OD step
1/ 4" ID hole, 3/8" OD step
1/8" 1D hole, 3/ 16: 1/4",5/ 16"step, CD2245 capa nd core
BULKHEAD
3/16" ID hole, 1/4"0D step,
3/8" OD steps
1/ 4" ID hole, 3/ 8"0D step,
7/ 16" OD steps
Fiare length extended to 3/4: solde r end - 1/B" ID,
3/ 16~ 1/4: 5/ 16"0D steps (CD2217 cap)
PART# CD3358 PKG QTY:4
5/16" ID, 1/2" OD step
Fiare leng th exte nd ed to 5/8:
PART# CD3368 PKGQTY:4
solde r end - 1/4" 1D, 11/32"0D
3/8 " ID, 1/2" OD step
PART
# CD4545 PKGQTY:6
9/32" ID and 1/4" OD steps
PART
# CD3600 PKGQTY:6
1/B"IDhole, 3/ 16: 1/4~ 5/16 : steps, 1/ 8"MPT
below hex wre nch cap and core
7/ 32" and 5/ 16" OD steps
Copper AccessTees
3/ 8"x 3" tube, expanded to 3/8" 1Don oneen d
For 1/4' coppertube
For3/ 4" coppert ube
PART# CD8416 PKG QTY:2
For 5/ 16" rnppe r tube
1/2" x 3" tub e, expanded to 1/2" 1D on one end
For 718" copper tube
For 3/8' copper tu be
5/ 8"x 3" tube, expanded to 5/S" ID on oneen d
1/4"x 3" tube , expanded to 1/4" ID on one end
PART# C08412 PKG QTY: 2
For 1/2" copper tube
PART# C08429
PKG QTY: 1
PART# CD842S PKG QTY: 2
3/ 4" x 3" tub e, expanded
to 3/4" ID on one end
5/16"x 3" tube, expanded to 5/16" on one end
For 5/ 8' copper tube
PART# CD8431
PKG QTY: 1
7/S" x 3" tub e, expanded
to 3/4" ID on one end
PART# CDS421 PKG QTY: 2
PART# C08S0S PKG QTY: 2
5/16"x 2· refrigeration tube
5/16" 1D and 3/S" OD
3/ 8"
.~-__.
---'--
--+"=
L ....
········ r ····:,
1/4' 1D and 5/16 " 0D
wi ll service 114: 5/ 16: 3/8 "
1/4' 1Dand3/8"0 D
PART# C08S06 PKG QTY: 2
3/8"1D and 1/2"0D
PART# C08432
PKG QTY: 1
1-1/8" x 4• t ube, expanded
to l- 1/8" IDononeend
M-SERIES
Braze-on Service Valves
The M-Series is the first and best braze-on , self-p iercing copper saddle valve. lt is widely used and
easily install ed on a charged line. After brazing the saddle portion onto lin e, the steel pin with valve
core penetrates th e lin e and is locked int o place simply by tightening the cap. Available in sizes
ranging from 1/ 4" to 1-1/ 8".
Copper saddlefor 1/2" 1ine
Copper saddlefor 1-1/ S" lin e
Copper saddle far 3/ 4" lin e
Copper sadd le far 5/ 16" lin e
Copper sadd le far 5/8 " lin e
Copper saddlefor 7/ 8" 1ine
Copper sadd le far 1/ 4" lin e
Copper saddl e fa r 3/ 8" lin e
,,...... ..
~
PART
# CD2814 PKGQTY:6
'
'
1/ 4" brass saddle
5/ 16" brass saddle
3/ 8" brass sadd le
PART
# CD2812 PKGQTY:4
General Specifications:
• Valve core and cap.
• Plated steel body. COA360 brass saddle.
• Four-way seal between body and saddle.
1/ 2" brass saddle
lnstallation lnstruction:
• Presssaddle onto line firmly (use pliers).
3/ 4" brass sadd le
• Apply flux and braze to line.
• Al low to cool.
7/ 8" brass saddle
• Screw body with core into saddle.
PART
# CD2818 PKGQTY:2
1-1/ 8" brass saddle
• Evacuateand charge system. Replacecap.
Clamp-on Service Valves
A line tap valve that is easy
to use. Five individual sizes
for special access jobs .
Step 1
Place aluminum channel
on line. lnsert aluminum
slide into grooves
on channel.
Viton gasket for
heat extremes.
Step 2
Grip slide and channel
with pliers. Place steel
pin in body and
screw into place.
Step 3
Holding grip on channel
and slides, tighten steel
housing . Unique torque
action provide s
permanent clamp.
For 1/ 4" lines.
For 5/ 16" lines.
For 3/8" lines.
For 1/2" lines.
For 5/8" lines.
l!INE TAP VAL\lE
The CD4338 and CD4358 line tap valves pierce with a
needle which automatically retracts and back seats when
work is complete. The refrigerant line remains free of
any restriction. No special installation tools are needed
beca use socket head screws and hex wrench are
included with every valve. These dependable
and field-proven valves are easy to install
and suita ble with ali refrigerants .
Fits 1/2" and 5/ 8" tu bes.
Fits 1/ 4", 5/ 16" and 3/ 8" tubes.
Step4
Continue to tighten
steel housing. Neoprene
gasket on pin gives
long-life seal.
Premium Line Service Valves
The original CRThas been improved with a ba/1 va/ve design.
Two BV-CRTmodels from
which to choose.
Compact size for working
in close quarter s.
Works with existing
CRTaccessories.
More durable w ith a stainless
steel ball and brazed side fitting .
More convenient to use.
The BV-CRTworks the same as our original CRT. lt removes a valve core from a 1/4" male
fiare access fitting without loss of refrigerant. Because it has a ball valve inside rather than
a stem-type valve, the tool can be closed with justa quarter turn .
With the valve core out , many operations can be performed including :
• Replacing a bad core
• Adding or removing refrigerant
• Measuring interna! temperature (CD3975 required - see next page)
• Measuring system pressure by attaching a gauge to the wide port of CD3930
Interna! Tempera ture Thermometers ..... .
Thread Chaser ............................
Pick...... . ........ . ..........
.. ..........
Extractor Rod .............................
Tube Piercing Attachment.... . . . . . . . . . . . .
CD3975
CD3916
CD3915
CD5577
CD3090
CD3920 PKGQTY: 1
BV-CRTfor 1/ 4" flare
connections .
/
CD3930 PKGQTY: 1
BV-CRTfor 1/4" flare
connections and has
1/4"male fiare side
access port.
CD39S6 PKGQTY: 1
BV-CRTfor 5/ 16" fiare
connections and has
1/4"male fiare side
access port.
Front Coupler
1/ 4" Fiare
Core Removal Tools
Al/ accessory too/s are compatible with
CD3900, CD3910, CD3920, CD3930, and CD3956
Valve core grappler and extractor .
Remo ves core without loss of refrig erant.
PART
# CD3090 PKGQTY: 1
Punches a ho le in cop per tubin g through
a V-Series fittin g (see page 12) for the
in st allat ion of acore with o ut loss
of refri geran t.
A th ermom eter to obtain a
temper ature reading through an
access fitting far calculating
sup erheat (see page 12).
PART#CD3910
PKGQTY: 1
Our or iginal 1/ 4" fiar e thumb screw shut -off core
remo val too l. Has 1/ 4" male fiar e sid e access
port w ith bra ss cap.
A thre ad cha ser to clean and align
the interna! threads of an
access fitting .
t
CD391 S and CD3916 tog eth er as a kit.
A pick to extracta bro ken core
from a hou sing with out loss of
refrig erant. Has left hand thr eads.
Same as th e CD3910 except w ith no
sid e port. Works with all accessories.
C&D Val ve guarantees it s
workma nship .
Grappler and Extractor Rod-Push down,
grab core, unscrew and pull up.
\
Shut-off valve w ith neoprene
sleeve expa nds, closing off
system after core is removed /
1/4" F emale Fiare Coupler
o-r ing sealing system
\
1/4" Male Fiare - Hose may be attached,
shut - off valve opened , and vacuum pulled if desired.
CRTAccessoriesand
Replacement Parts
•
•
•
•
•
LCD Read Out
Swivel Head
On-Off Swit ch, Hold Test Switch
Spare Battery
Temperature Range 58° -+ 302 F 0
lnstallation lnstructions
1. Braze V-Series fitting onto line.
2. Attach main body of CRTto fitting.
3. Attach TPAto the CRT body , screw
down needle to pierce hole in tubing
until it bottoms out. lt will not go
through the other side of tube .
4. Pull back TPA hand le. Shut off system
with CRT shut off valve. Remove TPA
from the CRT. Attach regular CRT rod
with core. Open shut-off valve. Screw
core into V fitting. Remove CRT.
~ALVES
V-Series
1/4"
(03094
5/ 16" (03096
PKG QTY: 6
PKG QTY:6
3/8"
(03098
PKG QTY: 6
1/2"
(03092
PKG QTY: 4
5/8"
(03095
PKG QTY: 3
3/4"
(03034
PKG QTY: 2
7/8"
(03078
PKG QTY: 2
1-1/8" (03018
PKG QTY: 2
PART# CDSSSS
PKGQTY:1 Set
AII the rings necessary to repair
any CRT,except the ones in the
chuck that grab th e core stem.
The shut-off stem wit h molded
neop rene shut-off gland for
(03900 and (03910. Brass stem knob,
retaining nut and gland, all in one piece.
The brass rod wit h ch uck,
rear end sealing nut, and knob,
all in one piece.
PART# CD3970
PKGQTY: 1
Combines CD391o
With CD3930BV-CRT and
CD3975thermometer
-- ---·¡---·
--·....
---CD,_,
CONO>
CDM04
CDl401
CD3113
CD.JeOS
CDN11
c.....
.. ___
c.....
"""'°
CDS5U
...:_WII..
c,,
,.. ....,.,v,('/t''UIIII
.... ->
........
l~": -
""'"--'
..""'"'-••t'
..
'IJr••_..,
l
COS050
CD20H
..
•
'.«)
CD4338
......
•..~·
.,...
_, ....
CDUOO
_,,
COMO>
CDMoe
CD8'03
--·-
·---
.·.:-·,.
C DH45
... _-:,
Access Fitting Service Kit
Appliance Service Kit
Part# CD9510SVK - case size 8.5 x 4.5"
Part# CD9530SVK - case size 8.5 x 4.5"
C 0 &43"
\,~
1
1 ::,,,, __ }
1
f
. .. .-·! -·~
-.---·- .-·I ...-··r--·-··
··
cos s, ,
coss>e
c a &sk
cos.s7•
c ososo
'
·-
- ~02.u!
CD840J
COl"OS
CD961 1
-
_ c .~ss1.• •
1
,. _
Refrigeration Service Kit- 9560
Refrigeration Service Kit - 9580
Part# CD9560SVK - case size 8.5 x 11"
Part# CD9580SVK - case size 8.5 x 11"
These thumbs crew core
dep ressors are d esig n ed to
be used on th e end of a
charging hose. When atta ched
t oa n access fitting , th ey can
depr ess th e valve core and
contr o l th e flow of gas.
For 1/ 4" male flar es.
For 3/ 16" m ale fiar es.
This also means the core can
be shut off before di sconnectin g,
thu s avoiding a spit back on
yo ur hand . The seals in each
part have broad comp atibilit y
w ith a II ref rigera nts.
The CD2070 is uniqu e in th at
it has an int ern a! shut -o ff th at
also hold s gas in th e hose
w hen di sconnect ed.
For 1/4" male fiares. Depr esses valve core
and control s flow . Back seat s and retain s
gas in the hou se.
For 1/ 4" male flar es. Made sm all for use
in tight qu art ers.
5/16 " F. fiare com pact thumb screw
cor e depressor.
5/ 16" F. fi are comp act th u mb screw co re depressor.
Reliable and easy to use, th e bod y ofthis valve is
construct ed with th e sam e dur abl e design as our
BV-CRT's. l nstall th e CD4040 o n th e end of a
charging hose and minimiz e refrig erant loss during
C&D
servicing . A quarter turn of the handl e makes qui ck
work of shutting on and off . Straight flo w through
design o ffers maximum flow rate. The brass depressor
tip full y engag es valve cor e.
1/ 4" female fiare swivel, d epressor tip x 1/ 4" m . fiare.
When attach ed to an
access fitting , th e "Sure
Seal " Ret aining Coupler
auto matically opens and
d e presses th e val ve core
all in o ne actio n. When
di sconnected , it trap s
refrigerant in the
charging hose. Leave it
perman ently installed on
th e end of th e ho se. The
seals are compatibl e with
newer refrigerant s, and if
int erna! part s need
replacing , a parts kit
is availabl e.
1/4" female fiar e retain er x 1/4" FPT.
1/ 4" female fi are "Sure Seal" retain er
x 1/ 4" male fiare.
1/ 4" female fiare ret ain er x 1/8" FPT.
90º 1/ 4" female fi are retainer x 1/4" male fi are.
1/ 4" female fiare ret ainer x 3/ 8"
m ale flare.
1/ 4" female fiar e retain er x 1/ 4" MPT.
COUPLERS
(CD2250cap) 1/4"flare
accessx 1/4" MPT
1/4" female fiarehex
x 1/2" maleAcme
PART
# CC1414 PKGQTY:2
(CD2245cap)
1/4" flareaccessx 1/4"
fiare, valve coreand fiare
nut included(no cap).
PART
# CD1818 PKGQTY:6
(CD2250cap) 1/4"flare
accessx 1/8" MPT
PART
# CC1818 PKGQTY:6
(CD2245cap)
(CD2250cap) 1/4" flare
accessx 1/8" MPT,elbow,
1/4" 1Don MPTend.
PART
# CC1819 PKGQTY:3
(CD2245cap)
PART
# CD2000 PKGQTY: 1
1/4"female fiare swivel
x 1/4" malefiareaccess.
Depressor tip and seal,
no valve core.
PART#CD201 O PKGQTY: 1
1/4"female fiare swivel
x 1/4" malefiareaccess.
90°configuration.Depressor
tip and seal, no valvecore.
1/4" female fiare swivel
x 1/2" male Acme.
Depressor tip and seal.
PART
# CD2014 PKGQTY:1
1/4" female fiareswivel
x 1/4" malepipe thread.
1/4" female fiareswivel
x 1/8" malepipe thread.
Depressortip and seal.
1/4" femalefiareswivel
x 1/8" female pipe threads.
3/8"femalefiare hex
x 1/2" maleAcme
1/2"Acmefemaleswivel
x 1/4" malefiare.
PART
# CD2023 PKGQTY:1
1/4"femalefiare swivel
x 3/8" malefiare.
1/4"femalefiarex 1/4"
femalepipe threads.
5/ 16female fiarex 1/4"
malefiareadapter.
PART#CD5013
PKGQTY:1
Rl 34aretrofit adapter,
straight low sidestem
(13MM)x 1/4"f. fiare,
bluecap.
PART#CD5016
PKGQTY:1
Rl34aretrofit adapter
straight high side stem
(16MM)x 1/4" female
fiare,red cap.
PART
# CD5014 PKGQTY: 1
Sameas CD5036except
for 1/4" male fiare.
1/4" adapter to 3/ 16" fittings
(GMcars, for instance),
contains depressorpin.
PART#CD9601
PKGQTY: 2
1/4" male fiare x 1/4" flare
nut with /depressor tip
x 1/4" male fiare on the
branch with one valve core.
PART# CD9602
PKG QTY: 2
1/4" male fiare with valve
core x 1/4" male fiare x
1/4" female fiare nut with
depressortip on the branch.
PART#CD9603
PKGQTY: 2
AII brass 1/4" female fiare nut
with valve core x 1/4" female
fiare nut with depressor
tip on the branch.
PART#CD9621
PKGQTY: 2
Sameas CD9601but
without depressor tip.
PART#CD9622
PKGQTY: 2
Sameas CD9602but
without depressor tip.
PART#CD9623
PKGQTY: 2
1/4" male fiare x 1/4"
male fiare with two
valve cores but no caps.
PART#CD9606
PKG QTY: 2
1/4" male fiare accessx 1/4"
male fiare nut with depressor
x 1/4" fiare nut with depressor
tip on the branch, cap and
valve core included.
PART# CD9611
PKG QTY: 2
Forged brass tee, 1/4" female
fiare n ut w ith d epressor
tip x 1/4" male fiare accessx
1I 4" male fla re accessx 1/4"
male fiare accesson branch
w ith one valve core.
PART#CD9627
PKG QTY: 2
Sameas CD9603but
without depressor tip .
PART#CD9627
PKG QTY: 2
Sameas CD9611but
without depressortip.
A/11/4" Fiares are Threaded for Va/ve Cores
Forged brasstee, 1/4" MPTx 1/4" m.
fiare x 1/4" m. fiare on branch, one
cap and valve core.
Forged brass tee, 1/4" m. fiare x 1/8"
MPTx 1/4" m. fiare on branch,
one cap and valve core.
Forged brasstee, 1/4" m. fiare x 1/4"m.
fiare x 1/4" MPT on branch, one
cap and valve core.
Forged brasstee, 1/4" m. fiare x 1/4" m.
fiare x 1/8" MPTon branch, one
cap and valve core.
PART#CD2613
PKG QTY: 1
Two l /4"female connect ions
with o-ring seals and 1/4"
male fiare (wit hout core)
1/ 4" female swive l fiare x l / 4" female
swive l fiare. No depressor tips.
PART# CD1450
PKG QTY: 2
1/ 4" male fiare access
x 1/4"f. fiare adapter ,
with one valve core
and copper gasket.
at right ang le for
connec tin g needs.
PART#CD5044
PKG QTY: 1
On the branch is a 1/4"
male fiare, no core, and
the other end a 1/4 "
fema le fiare swivel with
an o-ring seal.
PART#CD8725
PKGQTY: 2
The CD8725 has a gasket in the
PART#CD1454
PKGQTY: 2
1/ 4" male fiare swivel nut x l / 4" access
with in stalled valve core, all brass tube
has depressor tip .
l /4 " hex nut. The valve body is
stationary . When threads of existin g
system fittings are stripp ed anda
new core won 't go in, use this.
lt has a core and no depressor tip.
PART#CD9640
PKG QTY: 1
Two 1/4" male fiares, one
wit h core in a U shape. At
the side is a 1/ 4" fema le
fiare with depressor tip.
A l -l / 4" piece of l / 4" copper tubing, double
flared on onee nd wi th a l / 4" female fiare nut
and a depressed tip.
PART#CD9644
PKG QTY: 1
Same as (09640,
with th e
addition of a l /4" male fiare
opposite th e 1/ 4" fema le fiare.
The same as CD2594, only the end oft he
copper tube oppos ite the fema le fla re has
been swaged to allow 1/4" copper tube
in serted for brazing .
The same as CD2594, only a 1/ 4" mal e fiare
fitting has been brazed on. Acore may be
in serted in the l / 4" male fiare, but not
provided. For special OEM needs, we can
extend the coppe r tubing to any lengt h.
For specific OEM needs C&D Va/ve
a/so manufactures custom
components and assemblies
A Professional Tool
Fast and easy! A simple method to remove blower whee/ from
shaft without damage to blower, blower motor or shaft.
PART# CD3SOS PKGQTY: 1
1-1/ 4" hub only
PART#CD3S1SPKG QTY: 1
1-3/ 8" hub only
PART#CD3S70 PKGQTY: 1
Blower w hee l puller kit conta in s all sizes
PART# CD3S2S PKGQTY: 1
1-1/ 2" hub only
PART# CD3S40 PKGQTY : 1
Drive bolt
PART# CD3S4S PKG QTY: 1
Drive bolt and shank
PART# CD3S3S PKGQTY: 1
1-5/ 8" hub only
PART#CD3SOO PKG QTY: 1
Drive bolt, shank and 1- 1/4" hub
PART#CD3S10 PKGQTY : 1
••-
PART#CD3SSS PKGQTY : 3
Set screw
Allen wrench - 5/ 32"
Drive bolt, shank and 1-3/8" hub
PART#CD3520 PKGQTY : 1
Drive bolt, shank and 1- 1/2" hub
PART#CD3530 PKGQTY : 1
Drive bolt, shank and 1-5/ 8" hub
Fast refrigerant recovery with pliers that
clamp on and pierce tube. Workson tubing sizes
from 1/4" to 7/ 8''. Pliersare simple to use and
light weight. Piercingtip is self sharpening,
but also easily replaceable.
PART#CD4314
PKG QTY: 1
Replacement piercing tip .
lnstructions:
Connect service ho se to fitting on
pliers . Size locking plier s to tubing for
proper clamping. Align tip to center of
tubing and clamp down. Recove r refrigerant.
Replacementgasketsfor pliers.
Refrigerant
Locking Cap Driver
PART
# CD3830 PKGQTY: 1
Your one too/ to remove
industry standard /ocking caps
• 3 bits for access
to C&DValve, *Novent
and *ShieldCap.
Cap Driver
Replacement Bits
PART
# CD3831 / Red- Novent
PART
# CD3832 / Green- Novent
PART
# CD3833 / Silver - C&D - Shield
• Noventis a registeredtrademarkof the
Rector Sea! Corporationand Shieldis a
registered trademarkof JB Industries/ne.
• 3 driver bits.
• Magnetic tip securelyholds
bits in place.
• Bits stored in handlefor convenient
access and storage.
• Compactdesign helps allow access
in tight spots.
Valve Core
Torque Driver
PART
# CD3815 PKG QTY: 1
Calibrated to install standard refrigeration valve
cores to 4-5 in-lbs. per ARI 720-2002 .
Driver has torque "breakaway" feature that disengages
the driver w hen the proper torque is reached.
No need to listen far a "click".
Driver torque in reverse is non-limiting .
This allows foras much torque as necessary to remove difficult cores.
Locking
Refrigerant
Safety Cap
Keep Refrigerant
Where lt Belongs ...
Workswith Standard
va/ve corekey
• HelpPreventUnauthorizedAccess
• Locksin place to preventrefrigerantloss
• MeetsCMC(CaliforniaMechanicalCode)
and Title24
• 1106.3.1RefrigerantServicePorts
• Meets/MC7701.10and/RCM7411.6
'~
~
1/4" locking Caps
5/16" locking Caps
PART
# CD2290/2 PKGQTY: 2
PART
# CD2295/2 PKGQTY: 2
PART
# CD2290/10 PKGQTY: 10
PART
# CD2295/10 PKGQTY: 10
PART
# CD2290/50 PKGQTY: SO
PART
# CD2295/50 PKGQTY: SO
The Oil Tapis in stalled on a semi-hermetic compressor for the changing
of oi l and testing procedures. The int erna! pressure helps discharge the oil
from the crankcase and acid tests can be made wh ile the comp ressor is
running. lt allows the add iti o n by vacuum or remova l by pressure of oil
whi le compressor is running. You can detect hazardous refrigerant
pooling in the crankcase before start -up and contro l the removal using
a compound gauge. The oil tap can be perm anent ly installed.
Factory made double fiare connection, used
in such ways asan externa! equa lizer tube on
an expansion valve. 36" of copper tube with
doubl e fiares on swivel on each end,
no depr essor tips.
Same as CD2540, w ith a depressor tip on one end.
Same as CD2540, w ith a depressor tip on each end.
PART# CD2540
Core conta iner w ith wrenc h, all brass
w ith knurl for easy handling , compact
design holds three valve cores.
PART# CD3805 PKGQTY: 1O
Plastic tube container with six valve
cores and one core wrench tool.
Only available in a display box of 1o.
Two (2) tool s - acore w rench and thread
chaser. Comes w ith six (6) cores.
Overall length is 3-1/2".
CD2210
CD2213
CD2214
CD2215
CD2216
CD2217
CD2218
CD2220
CD2221
CD2225S
CD2225T
CD2235
CD2245S
CD2245T
CD2250S
CD2250T
CD2255
CD2260
CD2265
l/4"flare blackglass-filled nylon cap w ith neoprene o- ring seal ............................................................
25
3/ l 6"flare black glass-lilled nylon cap with neoprene o-ring seal ... ..................
. .......................................
6
10mm - 1.25 blackglass-filled nylon cap w ith neoprene o-ring seal ..........................................................
6
1/4" flare black glass-filled nylon cap with reta iner strap and neoprene o-ri ng seal ...........................................
6
12mm - 1.5 blackglass-filled nylon cap with neop rene o-r ing seal ............................................................
6
l / 4"flare blackglass-filled nylon cap with black retainer strap and neopr ene o-ring seal ......................................
6
3/8" fiar e black glass-filled nylo n cap with black retain er str ap and neopre ne o-ring seal ......................................
6
1/2" Acme black glass-filled nylo n cap with neoprene o-ring seal. ............................................................
6
1/2" Acme black glass-filled nylon cap w ith retainer strap and neoprene o-ring seal
. .. .. . .. .... . .. ..... ... . ..... . ..... . .... 6
1/4"flare flex brass cap, use with M-Series line -cap val ves or with copper gasket (CD0500) for metal to metal seal .. .... ..... . . 6
1/ 4" flare flex brass cap, use with M-Series line -cap val ves or with copper gasket (CD0500) for metal to metal seal . . ..... . ..... 25
l / 4"flare heavy-duty hex brass cap w ith neoprene seal ......................................................................
6
1/ 4" flare heavy-duty ro und brass cap with neop rene o-ring seal ............................................................
6
1/4" flare heavy-dut y round brass cap with neop rene o-ring seal ...........................................................
25
l / 4"flare heavy-dut y round brass cap with core wre nch tool and neoprene o-ring seal .......................................
6
l / 4"flare heavy-duty round brass cap with core w rench tool and neoprene o-ring seal ......................................
25
l / 4"flare heavy-dut y round brass cap with neop rene o-ring seal and security wire ...........................................
6
1/ 4" flare heavy-duty rou nd brass cap w ith neop rene gasket seal ............................................................
6
1/ 4" flare round brass cap w ith neop rene o-ring seal, attached keeper chain to prevent lo ss of cap . . ..... . .. . .... .. . . .. .. .... . 6
CD2217
CD2213
CD0400
CDOSOO
CD2577
CD44605
CD4460T
CD5038
CD5161
CD5501
CD7466
CD2214
CD2215
CD2216
CD2218
l /4 " flareforged nut (short ) ........................................
....... 5
Copper gasket, for use with CD2225 cap .................................
1o
l /4 " flare hex nut. .........................................................
6
Val ve core w ith Teflon seal, tapered , positi ve-stop barrel ...........
. .. .. . . . 6
Val ve core with Teflon seal, tapered , positi ve-stop barrel ...........
. .. .... 25
1/2"0D hose grommet for 3/8"charging ho ses .......................
.... . 6
5/l 6" 0D x 5/16 " neoprene hose grommet ...............................
25
Teflon o-ring seals for M-Series .........................................
25
1/2 " Acme lock nut for use w ith Acme bulkhead fittings ...................
5
CDOSOO
CD5501
CD7466
CD0066
CD0077
CD0099
CD0101
CD0111
CD1050
CD1060
CD1070
CD1090
1/8" 1D, 1/ 4" OD........................................................
5/32" ID, 9/32" OD ....... CRT accessory tool s, B-Seriesvalves ... .. . . .. ..
7/32" ID, 11/32"0D ...... CD5050co upler .......................
.......
1/4" ID, 3/8" OD ........................................................
5/ 16" ID, 7/16" OD .. . .. . CRT,core depressor couplers .................
5/32" 1D, 11/ 32" OD ....................................................
3/ 16" ID, 3/8" OD ........
CD2223, CD2235, CD2250, CD2255 cap
7/ 32" ID, 13/ 32" 0D ...... CD2219, CD2245, CD2265 cap ................
5/ 16" 1D, 1/ 2" OD ........
CRT,coredepressorcouplers ............
.....
10
10
10
10
1O
10
10
10
10
CD3688
o
CD5555
P.ARTS
CoreRemovalToo/
CD5555
CD5560
CD5577
0-rings necessary to repair a CRTexcept th ose contained in the chuck .. . . . 1
Shut-offthem w ith molded neoprene gland, includes brass stem, knob,
retaining nut and gland ......................................
1
Brass rod and chuck, rear end sealing coupler and knob all in one piece .... 1
"SureSeal"RetainingCoupler
CD5171
Set repair kit containing o-rings , washer, val ve depressor and springs ......
1
CD5577
CD5038
Orders
Orders are subject to w ritte n acceptance by C&D Valve, LLC, home offi ce and are subj ect
to st rikes, accidents, delays by suppliers, and oth er causes beyond our cont rol. Receipt of an
order w ill be understood as acceptance of th ese t erm s and conditi ons unl ess specific agreement
to th e cont rary has been made in w ritin g prior to order placement .
$50 Minimum Order
Prices
Prices show n apply to quantiti es on a single shipment to a single destin ation and do not includ e
any sales tax w hich may apply. A II prices are subj ect t o change w ith out noti ce and all shi pment s
w ill be invo iced at prices in eff ect at t ime of shipm ent.
Terms
Terms are 1% 1O days, net 30. 1- 1/2 % per mont h ( 18% annum ) service charge w ill apply to
past due invo ices.
Freight
F.O.B. shipping point w ith fr eight allow ed or prepaid vía cheapest w ay on single order of $600
or more t o a single destin ation in th e U.S.A. except Alaska and Hawa ii. Shipm ents under $600
are sent collect or prepaid and charged.
Damages
Damages in tr ansit are th e responsibility of th e carrier, and such claims should be fil ed w ith
th e carrier, not C& D Valve, LLC, as our responsibilit y ends u pon recei pt of the
mat erial by th e carrier.
Shortages C laims for shortages mu st be made w ithin 1O days of delivery.
Returns
Return s w ill not be accepted w ith out return authori zati on fr om home offi ce.
Warranty
Product s sold by C& D Valve, LLC are war rant ed for a period of one year fr om date of
shipm ent by C& D Valve, LLC and w e limit thi s w arranty t o th e repair, replacement , or
credit at invoice price (oúr option) of product s w hich in our opini on are defective due to
defect s in workm anship and/ or materials. Thi s express warranty is in lieu of and excludes all
oth er wa rranti es, guarantees and/ or representation s, express or impli ed, of C& D Valve, LLC
and / or th e manufa ctur er of such products who make NO WARRANTY OF MERCHANTABILITY
O R FITNESS FO R A NY PA RTICULAR PURPOSE.
Technical inform ati on, recommendati ons and advice as to properti es and usage of materi aIs,
design, installati on and use of produ ct s, engineering and oth er matt ers are provid ed as an
accommodation and are int ended only as suggesti ons. Alth ough th ey are believed to be
accurat e, based on C& D Valve's know ledge and experience, C&D Valve assumes no
obligation or liabilit y for any result s obtain ed in th eir use or appli cation, and th ey are not to
be constru ed as est ablishing any wa rranty, express or im plied. In no event shall C& D Valve
be liable fo r claims fo r any damages w hatsoever (w heth er direct, imm ediate, fo reseeable,
consequential , or special) suff ered by buyer or anyone else arising out of any breach
by C& D Valve, LLC. C& D Valve makes no wa rranty t o th ose defin ed as consumers in
th e M agnuson-M oss Warranty - Federal Trade Commi ssion lm provement Act .
Warning
C& D Valve, LLC products are design ed fo r use by t echnically t rained Air Conditi oning and
Refri geration Service Engineers only. Due to th e high pressures encountered in th ese systems,
plus th e dangers due to th e physical and chemical natu re of refri gerants and oil s present in th e
syst ems, misapplicati on could result in injur y or death. C& D Valve, LLC expressly w arns
again st th e sale t o or use of th e product s by oth er th an professionally tr ained personnel.
Saf ety gogg les should always be worn w hen wo rking with refrig erants. Contact with
refrig erant s may cause injur y.
Note
Design, specifications and mat eriaIs are subj ect to change w ithout notice.
U nless agreed in wr iting , th ese t erms w ill constitut e our entire obligation upon our acceptance of any
order, regardless of th e t erms, stipulati ons, etc. in any request for quotati ons, or as may appear in any
order form now or later submitt ed by th e buyer.
P.O. Box13250,0klahomaCity,OK73113
• 405 .843 .5621 • 800.654 .9233 • FAX:405.840 .0443
Visit our website: www.cdvalve .com • [email protected]

Premium Line Service Valves

Transcription

Similar documents

Sqwincher Powder Pack - Clark-McKibben Safety Products, Inc.

Beat the Heat - Kent

Saebo Long Term Care Program

The Caledonian Society of Cincinnati`s

Saebo Evaluation and Treatment Kit

NCLI Merchandise - Pheasants Forever

K-CUPS $15/BOX OF 12

EXPORT

View Dr van Niekerk`s presentation

Ticket Order Form - LuCille Tack Center for the Arts