4WD Accessories.indd

Transcription

ENJOY THE RIDE...
...RIDE TO ENJOY
SPRING & SUSPENSION
4x4 Accessories
Catalogue
contents
table of
contents
Accessories
iv |
x
|
xii |
xiv |
xvi |
xviii |
xix |
xx |
xxi |
xxii |
xxiii |
xxiii |
xxiv |
xxiv |
xxv |
xxvii |
xxviii|
Bull Bars
Roof Racks
Side Steps & Side Rails
Snorkels
Rear Drawers
Canopies
Dual BaƩery Trays
Air Compressors
Camping/Touring Equipment
Driving Lights
Dual BaƩery Kits
First Aid Kits
Fridge / Freezer
LiŌing Jacks
Recovery Gear
Tyre Accessories
Winches
Information
xxiv | Terms & CondiƟons
Dobinsons Spring & SuspensionTM are committed to bringing you
the very latest at all times. While our printed editions come out on a
regular basis, our online editions are constantly updated.
It is our recommendation that you verify your selection with these
online editions before ordering. You can view them at any time on our
website of using these QR Codes.
Visit our Website
4x4 Catalogue
4x4 Accessories Catalogue
While we take all care in the preparation of this catalogue, we also realise errors can occur. Please confirm that the parts you are ordering are
correct for your requirements. No responsibility is implied or taken. The names and reference numbers of manufacturers and suppliers, other
than Dobinsons Spring & SuspensionTM, used in this catalogue are shown only to assist our customers in identifying replacement parts. Under no
circumstances does Dobinsons Spring & SuspensionTM imply that the parts are of these OE manufacturers.
Pictures used in this Catalogue are for illustration purposes only
ABN: 22 751 879 972
Dobinsons Spring & SuspensionTM | www.dobinsonsprings.com
JAN14
i
ii
JAN14
JAN14
iii
NOTE
»
»
ACCESSORIES
ACCESSORIES
»
Classic Black and Classic Black Deluxe Bull Bars are supplied with a black
finish.
Stainless Loop Deluxe Bull bars are supplied with a black finish and
stainless steel loops.
Colour matching can be performed by your local spray painter.
3500 Series
Bull Bars
Classic Black
VEHICLE MAKE & MODEL
PART NUMBER
FITTING
(HOURS)
FORD
Ranger PJ / PK
Ranger PX
Suits 4x4 & 4x2
Suits 4x4 & 4x2
2007 - 09/2011
BU19-3524
3
10/2011 on
BU19-3525
3
03/2011 on
BU20-3534
3
2002 - 2006
BU21-3522
3
GREAT WALL
Great Wall V200/V240
(Face-lifted models only) T/Diesel models non-winch compatible
HOLDEN / ISUZU / CHEV
Rodeo RA
Suits 4x4 & 4x2
Rodeo RA7
Suits 4x4 & 4x2
D-Max
Suits 4x4 & 4x2
D-Max
Suits 4x4 & 4x2
Colorado
Excludes under protection kit
Suits 4x4 & 4x2
Colorado RG / Colorado 7 / Trailblazer SUV
Isuzu MU-X
Suits 4x4 & 4x2
Suits 4x4 & 4x2
2007 - 2011
BU21-3513
3
2007 - Mid Year 2012
BU21-3513
3
Mid Year 2012 on
BU21-3529
3
2008 - Mid Year 2012
BU21-3514
3
Mid Year 2012 on
BU21-3532
3
2012 on
BU21-3538
3
2007 - 09-2011
BU39-3501
3
10/2011 on
BU39-3530
3.5
MAZDA
BT50
Suits 4x4 & 4x2
BT50 B32P
Suits 4x4 & 4x2
MITSUBISHI
2009 - Mid Year 2013
BU43-3502
3.5
Triton ML
Suits 4x4 & 4x2
10/2006 - 08/2009
BU43-3502
3.5
Triton MN
Suits 4x4 & 4x2
09/2009 on
BU43-3503
3.5
Challenger (Pajero Sport USA, Thailand)
iv
JAN14 Rev.1
Excludes Face-Lifted models
Suits Flared Models
Requires a Bumper Cut
Fitting times are an estimate only. * Vehicles not fitted with OE fog lights will require an extra 0.75 hrs
NOTE
* Due to the additional weight when fitting a Bull Bar and/or Winch, the vehicles
ride height will be lowered. Dobinsons Spring & SuspensionTM suggest replacing
the springs with a matched pair of springs to suit the requirement.
ACCESSORIES
ACCESSORIES
3500 Series
Bull Bars
PART NUMBER
FITTING
(HOURS)
NISSAN
Navara D22 / NP300
Suits 4x4 & 4x2
Navara D40
Ribbed Bumper Suits 4x4 & 4x2 (Thailand Built)
Navara D40
Ribbed Bumper Suits 4x4 & 4x2 (Spain Built)
Navara D40
Smooth Bumper Suits 4x4 & 4x2 Diesel (Spain Built)
Excludes RX Single Cab & any V6 T/D
2002 on
BU45-3517
2
09/2005 on
BU45-3504
3.5
09/2005 - 04/2010
BU45-3504
3.5
05/2010 on
BU45-3526
3.5
Pathfinder R51
Excludes any V6 T/D variants
09/2005 - 04/2010
BU45-3504
3.5
Pathfinder R51
05/2010 - 09/2013
BU45-3526
3.5
1998 - 2004
BU45-3519
2
Patrol Y61 GU Wagon
(Series 1,2 & 3)
Patrol Y61 GU Wagon
(Series 4)
Patrol Y61 GU Ute
(Series 1,2 & 3)
Patrol Y61 GU Ute
(Series 4 on)
Coil Spring Models Only. Centre Under Protection Only
09/2004 on
BU45-3505
2
1998 - 2006
BU45-3519
2
2006 on
BU45-3505
2
1985 - 1990
BU59-3515
2
TOYOTA
Bundera LJ/RJ 70/73, Landcruiser FJ/BJ 70/71/73/74 SWB & MWB
Fortuner
Hilux N16, N17
Suits 4x4
Hilux Vigo N25, N26
Excludes under protection kit
2005 on
BU59-3516
2
1997 - 2005
BU59-3521
3
04/2005 - 08/2011
BU59-3510
3
Suits 4x4
09/2011 on
BU59-3527
3
Landcruiser HZJ/PZJ 70/73 MWB
1990 - 1999
BU59-3515
2
Landcruiser FZJ/HZJ 71/74 SWB & MWB
1999 - 2004
BU59-3515
2
Landcruiser FZJ/PZJ/HZJ 77 Wagon
1993 - 1999
BU59-3515
2
Landcruiser 75,78,79 Series
1984 - 2007
BU59-3515
2
Landcruiser (V8) 76,78,79 Series
2007 on
BU59-3506
2
Landcruiser LJ/RJ/KZJ 70/72/73/77/78/79
1987 - 1996
BU59-3515
2
Hilux Vigo
Suits 4x4
Landcruiser 80 Series
BU59-3518
2
(Solid Front Axle)
04/1998 on
BU59-3507
2
(Independant Front Suspension)
1998 on
BU59-3508
2
(Initial Release Only)
2008 - 02/2012
BU59-3509
3
(Facelift model)
2012 on
BU59-3533
3
12/2002 - 09/2009
BU59-3511
3
10/2009 - 09/2013
BU59-3512
3
2011 on
BU63-3523
3
Prado 120 Series
Prado 150 Series
(Initial Release Only, For Facelift Models Refer to Classic Black Deluxe)
VOLKSWAGEN
Amarok
Suits Flared Models
JAN14 Rev.2
v
ACCESSORIES
ACCESSORIES
vi
JAN14 Rev.1
NOTE
ACCESSORIES
ACCESSORIES
Bull Bars
Classic Black Deluxe
PART NUMBER
FITTING
(HOURS)
FORD
Ranger PX
Suits 4x4 & 4x2
10/2011 on
BU19-3686
3*
Mid Year 2012 on
BU21-3685
3*
Mid Year 2012 on
BU21-3687
3*
2012 on
BU21-3699
3*
10/2011 on
BU39-3694
3.5*
09/2009 on
BU43-3693
3.5*
05/2010 on
BU45-3692
3.5*
05/2010 - 09/2013
BU45-3692
3.5*
1998 - 2004
BU45-3690
2*
09/2004 on
BU45-3691
2*
1998 - 2006
BU45-3690
2*
2006 on
BU45-3691
2*
D-Max
Suits 4x4 & 4x2
Isuzu MU-X
Suits 4x4 & 4x2
Suits 4x4 & 4x2
MAZDA
BT50 B32P
Suits 4x4 & 4x2
MITSUBISHI
Triton MN
Suits 4x4 & 4x2
NISSAN
Navara D40
Pathfinder R51
Patrol Y61 GU Wagon
(Series 1,2 & 3)
Patrol Y61 GU Wagon
(Series 4)
Patrol Y61 GU Ute
(Series 1,2 & 3)
Patrol Y61 GU Ute
(Series 4 on)
Centre Under Protection Only
Centre Under Protection Only
TOYOTA
Hilux Vigo
Suits 4x4
Prado 150 Series
(Initial Release & Facelift Models)
(Initial Release & Facelift Models)
09/2011 on
BU59-3695
3*
2008 on
BU59-3696
3*
10/2009 on
BU59-3697
3*
2011 on
BU63-3680
4*
VOLKSWAGEN
Amarok
Suits Flared Models
JAN14 Rev.3
vii
NOTE
»
ACCESSORIES
»
ACCESSORIES
»
Classic Black and Classic Black Deluxe Bull Bars are supplied with a black
finish.
Stainless Loop Deluxe Bull bars are supplied with a black finish and
stainless steel loops.
Colour matching can be performed by your local spray painter.
3600 Series
Bull Bars
PART NUMBER
FITTING
(HOURS)
FORD
Ranger PJ / PK
Ranger PX
Suits 4x4 & 4x2
Suits 4x4 & 4x2
2007 - 09/2011
BU19-3676
3*
10/2011 on
BU19-3677
3*
03/2011 on
BU20-3672
3*
2007 - 2011
BU21-3663
3*
2007 - Mid Year 2012
BU21-3663
3*
GREAT WALL
Great Wall V200/V240
(Face-lifted models only) T/Diesel models non-winch compatible
Rodeo RA7
Suits 4x4 & 4x2
D-Max
Suits 4x4 & 4x2
D-Max
Suits 4x4 & 4x2
Colorado
Suits 4x4 & 4x2
Isuzu MU-X
Suits 4x4 & 4x2
Suits 4x4 & 4x2
Mid Year 2012 on
BU21-3681
3*
2008 - Mid Year 2012
BU21-3664
3*
Mid Year 2012 on
BU21-3684
3*
2012 on
BU21-3698
3*
2007 on
BU29-3670
2*
2007 - 09-2011
BU39-3651
3*
10/2011 on
BU39-3682
3.5*
2009 - Mid Year 2013
BU43-3652
3.5*
JEEP
Wrangler JK
(Single Black Loop Style) Excludes under protection kit
MAZDA
BT50
Suits 4x4 & 4x2
BT50 B32P
Suits 4x4 & 4x2
MITSUBISHI
Challenger (Pajero Sport USA, Thailand)
Excludes Face-Lifted models
Triton ML
Suits 4x4 & 4x2
10/2006 - 08/2009
BU43-3652
3.5*
Triton MN
Suits 4x4 & 4x2
09/2009 on
BU43-3653
3.5*
2002 on
BU45-3667
2*
09/2005 on
BU45-3654
3.5*
09/2005 - 04/2010
BU45-3654
3.5*
NISSAN
Navara D22 / NP300
viii
Suits 4x4 & 4x2
Navara D40
Ribbed Bumper Suits 4x4 & 4x2 (Thailand Built)
Navara D40
Ribbed Bumper Suits 4x4 & 4x2 (Spain Built)
Navara D40
05/2010 on
BU45-3678
3.5*
Pathfinder R51
09/2005 - 04/2010
BU45-3654
3.5*
Pathfinder R51
05/2010 - 09/2013
BU45-3678
3.5*
JAN14 Rev.3
Suits Flared Models
NOTE
ACCESSORIES
ACCESSORIES
3600 Series
Bull Bars
PART NUMBER
FITTING
(HOURS)
NISSAN
Patrol Y61 GU Wagon
(Series 1,2 & 3)
1998 - 2004
BU45-3669
2*
Patrol Y61 GU Wagon
(Series 4)
09/2004 on
BU45-3655
2*
1998 - 2006
BU45-3669
2*
2006 on
BU45-3655
2*
2010 on
BU45-3673
2.5*
2005 on
BU59-3666
3*
04/2005 - 08/2011
BU59-3660
3*
09/2011 on
BU59-3679
3*
Patrol Y61 GU Ute
(Series 1,2 & 3)
Patrol Y61 GU Ute
(Series 4 on)
Patrol Y62
Coil Spring Models Only
Coil Spring Models Only
Excludes TI-L Model
TOYOTA
Fortuner
Hilux Vigo N25, N26
Hilux Vigo
Suits 4x4
Suits 4x4
2007 on
BU59-3656
2*
BU59-3668
2*
(Solid Front Axle)
04/1998 on
BU59-3657
2*
(Independant Front Suspension)
1998 on
BU59-3658
2*
(Initial Release Only)
2008 - 02/2012
BU59-3659
3*
(Facelift model)
2012 on
BU59-3688
3*
1996 - 11/2002
BU59-3674
2.5*
12/2002 - 09/2009
BU59-3661
3*
10/2009 - 09/2013
BU59-3662
3*
2011 on
BU63-3675
4*
Prado 90 Series
Prado 120 Series
Prado 150 Series
(Initial Release Only, For Facelift Models Refer to Classic Black Deluxe)
VOLKSWAGEN
Amarok
BULLBAR REPLACEMENT PARTS
LED Indicator / Park Light (Single Unit)
BU80-003
Fog Light (Single Unit)
BU80-004
Fog Light Surround
BU80-006 L/R
(Specify L for Left or R for Right after the part number)
Poly Bumber Over Rider
(Specify L for Left or R for Right after the part number) Suits: Classic black & Classic Black Deluxe
BU80-007 L/R
Poly Bumber Over Rider
(Specify L for Left or R for Right after the part number) Suits: Stainless Loop Deluxe
BU80-008 L/R
BULLBAR BLANKING KIT
BU80-005K
Plug kit to cover holes when removing loops, require 1 of each p/n per bar
KIT CONTAINS:
1 x pair Poly Bumper Plug (p/n: BU80-002), 1 x pair Outer Wing Bolt Hole Plug (p/n: BU80-001)
Suits Flared Models
JAN14 Rev.3
ix
ACCESSORIES
ACCESSORIES
Features
Bull Bars
FEATURES
»
»
»
»
»
Airbag & Winch Compatible
Dual Aerial Mounts
Dual Hi-Lift Jacking Points
Driving Light Mounts, Park & Indicator Lights
Polyurethane Bumper Protectors
»
»
»
Stainless Steel Grade 304 / Triple Loop
Fog Lights 100mm
HB4 OEM High Quality Standard
»
»
»
Classic Black
High Quality Steel Components
Unique Mounting System: Winch mounts separate to Bar. Spreads Impact & Winching Loads evenly over Chassis
Split Upper & Lower Design to Allow Maximum Airflow to the Radiator
Most Dobinsons Bull Bars are Equipped with Centre and Side
Protection Plates for the Underside of the Bull Bar.
Stainless Loop Deluxe
ture
e tto
o
A Crucial Feature
he
help Protect the
Radiator and Other
Vital Engine Components when Off-road Driving.
Roof Racks
DESCRIPTION
PART NUMBER
STEEL ROOF RACK
»
»
»
»
»
Cargo Net Hook
Spare Wheel Mounting Point
Strong Brackets
Fitting Kit Included
Powder Coat Finish
Fitting Time:
approx 1.0hr
(all roofracks)
1500mm x 1250mm
Bolt on Style Bracket to Suit Canopies and Trailers
To be mounted to canopy roof rails may require some fabrication. Fibreglass canopies require internal reinforcement bars.
RR80-4100
1850mm x 1250mm
Gutter Style Mounting Bracket
Suits:
» MQ / MK Nissan Patrol
» Y60 GQ Nissan Patrol
» Y61 GU Nissan Patrol
» 60 Series Toyota Landcruiser
» 70 Series Toyota Landcruiser (1985 on - does not include FRP top)
» 90 Series Toyota Prado
» 120 Series Toyota Prado (Additional Fitting Kit P/N RR80-4113 Required)
» 100 - 105 Series Toyota Landcruiser (Additional Fitting Kit P/N RR80-4105 Required)
» 200 Series Toyota Landcruiser (Additional Fitting Kit P/N RR80-4106 Required)
x
JAN14
RR80-4101
ACCESSORIES
ACCESSORIES
Roof Racks
DESCRIPTION
PART NUMBER
2200mm x 1250mm
Suits:
» 200 Series Toyota Landcruiser (Additional Fitting Kit P/N RR80-4124 Required
RR80-4102
ROOF TOP TENT RACK
»
»
»
»
Spare Wheel Mounting Point
Strong Brackets
Fitting Kit Included
Powder Coat Finish
1500mm x 1250mm
Bolt on Style Bracket to Suit Canopies and Trailers
To be mounted to canopy roof rails may require some fabrication. Fibreglass canopies require internal reinforcement bars.
RR80-4103
1850mm x 1250mm
Suits:
RR80-4104
2200mm x 1250mm
Suits:
RR80-4115
JAN14
xi
ACCESSORIES
ACCESSORIES
Side Steps & Side Rails (Sold as Pair)
Features
FEATURES
»
»
»
»
»
»
»
xii
Durable powder coat finish
ADR and airbag compatible
Non-slip checkerplate tread steps
2mm thick 50mm heavy duty steel tube construction
Twin inner and outer tube design for maximum sill protection
Frontal swivel section for airbag compliance with airbag compliant bullbars
Can also be fitted to most other brands of bullbars
(Outer bullbar loop upright must be close to vertical)
JAN14
ACCESSORIES
ACCESSORIES
Side Steps & Side Rails (Sold as Pair)
PART NUMBER
STEPS ONLY
PART NUMBER
STEPS & RAILS
2007 - 09/2011
SS19-101
SR19-150
10/2011 on
SS19-102
SR19-151
2007 - 2011
SS21-104
SR21-153
FITTING
(HOURS)
FORD
Ranger PJ / PK
Ranger PX
Dual Cab
Dual Cab
Suits 4x4 & 4x2
Suits 4x4 & 4x2
SS-1
S+R-2
SS-1
S+R-2
Rodeo RA7 Dual Cab
Suits 4x4 & 4x2
D-Max
Dual Cab Suits 4x4 & 4x2
2007 - Mid Year 2012
SS21-104
SR21-153
D-Max
Mid Year 2012 on
SS21-105
SR21-170
2008 - Mid Year 2012
SS21-105
SR21-154
2007 - 09-2011
SS19-101
SR19-150
10/2011 on
SS19-102
SR19-151
Colorado
Dual Cab
Suits 4x4 & 4x2
SS-1
S+R-2
SS-1
S+R-2
SS-1
S+R-2
SS-1
S+R-2
MAZDA
BT50
BT50 B32P
SS-1
S+R-2
SS-1
S+R-2
MITSUBISHI
Triton ML
10/2006 - 08/2009
SS43-106
SR43-155
Triton MN
Dual Cab
09/2009 on
SS43-106
SR43-155
SS-1
S+R-2
SS-1
S+R-2
2002 on
SS45-107
SR45-156
SS-1
S+R-2
Navara D40 Dual Cab, Ribbed Bumper Suits 4x4 & 4x2 (Thailand Built)
09/2005 on
SS45-109
SR45-158
SS-1
S+R-2
Navara D40
Dual Cab, Ribbed Bumper Suits 4x4 & 4x2 (Spain Built)
09/2005 - 04/2010
SS45-109
SR45-158
SS-1
S+R-2
Navara D40
Dual Cab, Smooth Bumper Suits 4x4 & 4x2 Diesel (Spain
05/2010 on
SS45-108
SR45-157
SS-1
S+R-2
Suits 4x4 & 4x2
NISSAN
Navara D22 / NP300 Dual Cab
Built)
Suits 4x4 & 4x2
Patrol Y61 LWB GU Wagon
(Series 1,2,3)
1998 - 2004
SS45-110
SR45-159
SS-1
S+R-2
(Series 4)
09/2004 on
SS45-111
SR45-160
SS-1
S+R-2
04/2005 on
SS59-117
SR59-166
SS59-113
SR59-162
10/2009 - 09/2013
SS59-118
SR59-168
SS-1
S+R-2
SS-1
S+R-2
SS-1
S+R-2
2011 on
SS63-119
SR63-169
SS-1
S+R-2
TOYOTA
Hilux Vigo
Dual Cab
Suits 4x4
Prado 150 Series
VOLKSWAGEN
Amarok
Dual Cab
Fitting times are an estimate only. Fitting times may vary.
JAN14 Rev.1
xiii
ACCESSORIES
Increased Airflow
Maximises Engine
Performance and
Saves Fuel
ACCESSORIES
Snorkels
Designed to Increase Water Separation
Listings for Australian Delivered Vehicles
Install a Snorkel and Get your Air Intake Above the Ground and
Out of the Water
MOUNT PART NUMBER
FITTING
(HOURS)
FUEL
ENGINE
Diesel
Diesel
Diesel
3.0L Tdi
3.2L Tdi
2.2L Tdi
Left
Right
Right
SN19-3316
SN19-3384
SN19-3384
3
3
3
Diesel
Diesel
Diesel
Diesel
Diesel
Diesel
3.0L
3.0L
3.0L
3.0L
2.8L
2.8L
Right
Right
Right
Right
Right
Right
SN21-3383
SN21-3456
SN21-3383
SN21-3456
SN21-3457
SN21-3457
2
2
2
2
3
3
FORD
Ranger PJ/PK 06 - 11
Ranger PX 10/11 on
Ranger PX 10/11 on
(Excludes models with flares)
(Excludes models with flares)
D-Max (Dual & Extra Cabs ONLY) 07/08 - 05/12
D-Max 06/12 on
Rodeo RX, LX & LT (NOT Single Cab) 01/07 - 08
MU-X 12 on
Colorado RG Mid Year 12 on
Colorado 7/Trailblazer Mid Year 12 on
Tdi
Tdi
Tdi
Tdi
Tdi
Tdi
MAZDA
BT-50 06 - 11
Diesel
3.0L Tdi
Left
SN19-3316
3
BT-50 B32P 10/11 on
Diesel
3.2L Tdi
Right
SN39-3459
3
Diesel
Diesel
Diesel
3.2L Tdi
2.5L Tdi
4D56 2.5L
Right
Right
Right
SN43-3329
SN43-3329
SN43-3451
3
3
2.5
Diesel
Diesel
3.0L Tdi
2.5L Tdi
Left
Left
SN45-3382
SN45-3382
2.5
2.5
Diesel
Diesel
Petrol
Diesel
Diesel
Petrol
Diesel
Petrol
Diesel
Petrol
Diesel
Diesel
Diesel
2.5L Tdi
2.5L Tdi
4.2L, 3.0L
4.2L
2.8L Td, 4.2L Td
4.5L
4.2L Td, 3.0L Td
4.8L
4.2L Tdi, 3.0L Tdi
4.8L
3.0L Td
4.2L
4.2L Td
Left
Left
Left
Left
Left
Left
Left
Left
Left
Left
Left
Left
Left
SN45-3397
SN45-3397
SN45-3338
SN45-3338
SN45-3348
SN45-3348
SN45-3343
SN45-3348
SN45-3401
SN45-3402
SN45-3401
SN45-3348
SN45-3343
2.5
2.5
2.5
2.5
2.5
3
3
3
3
3
3
3
3
MITSUBISHI
Triton ML 10/06 - 08/09
Triton MN 09/09 on
Delica L400 94 - 06
NISSAN
Navara D22 10/01 - 12/06
Navara D22 (Single Battery Only) 01/07 on
Navara D40 Excludes Single Cab & 2010 on Spain-built (VSK Vin) ST/ST-X
R51 Pathfinder 04/05 - 2009
Patrol GQ / Ford Maverick 01/88 - 10/97
Patrol GQ / Ford Maverick (Vertical Pre Cleaner) 01/88 - 10/97
Patrol GU (Wagon Series 1) 11/97 - 03/00
Patrol GU (Wagon Series 2 & 3) 04/00 - 08/04
Patrol GU (Wagon Series 4) 09/04 on
Patrol GU (Series 4 - Coil Cab Chassis) 07 on
Patrol GU (Ute Series 1,2 & 3) 11/97 to 11/06
Dobinsons Spring & SuspensionTM Snorkels
Fitting times are an estimate only
xiv
JAN14 Rev.1
Increased Airflow
Maximises Engine
Performance and
Saves Fuel
Snorkels
Listings for Australian Delivered Vehicles
Install a Snorkel and Get your Air Intake Above the Ground and
Out of the Water
FUEL
ENGINE
MOUNT PART NUMBER
Diesel
Petrol
Diesel
Petrol
Diesel
Petrol
Diesel
Diesel
Petrol
Petrol
Diesel
Diesel
Petrol
Petrol
Diesel
Petrol
Petrol
Diesel
4.0L
4.0L
4.2L 1HZ
4.0L, 4.5L
4.2L, 4.2L Td
4.5L, 4.7L V8
4.2L Td, 4.2L Tdi
4.5L TTD V8
4.7L V8
4.5L, 4.7L V8
4.2L Td, 4.2L Tdi
3.0L Tdi
4.0L V6
3.4L V6
3.0L
4.0L V6
4.0L V6
3.0L
Right
Right
Right
Right
Right
Right
Right
Right
Right
Right
Right
Right
Right
Right
Right
Right
Right
Right
SN59-3374
SN59-3374
SN59-3375
SN59-3361
SN59-3361
SN59-3369
SN59-3369
SN59-3356
SN59-3356
SN59-3369
SN59-3369
SN59-3367
SN59-3368
SN59-3357
SN59-3355
SN59-3445
SN59-3446
SN59-3446
Diesel
2.0L Tdi I4
Right
SN63-3455
FITTING
(HOURS)
ACCESSORIES
ACCESSORIES
Designed to Increase Water Separation
TOYOTA
Landcruiser 71,73,75,78,79 Series
(Narrow Front)
01/85 - 03/07
* Does not replace genuine Toyota snorkel
Landcruiser 80 Series 01/90 - 03/98
Landcruiser 100 Series 04/98 - 09/07
Landcruiser 200 Series 08 on
Lexus LX470 04/98 - 09/07
Hilux 04/05 on
Prado 90 Series 12/97 - 12/02
Prado 120 Series 12/02 to 09/09
Prado 150 Series 10/09 on
*
*
*
3
3
2.5
3
3
2
2
3
3
2
2
2
2
2
2.5
2
3
3
VOLKSWAGEN
Amarok
(Suits Highline, Trendline, Ultimate fitted with flares only)
03/11 on
4
REPLACEMENT SNORKEL HEAD
SN80-077
77mm
85mm
SN80-085
Dobinsons Spring & SuspensionTM Snorkels
Fitting times are an estimate only
JAN14 Rev.2
xv
ACCESSORIES
ACCESSORIES
Rear Drawers
Features
FEATURES
»
»
»
»
»
»
»
»
»
»
xvi
1.6mm zinc plated robust steel construction
12mm heavy duty ply wood panels with marine carpet covering
Single side inbuilt, heavy duty fridge slide
8 x heavy duty stainless steel tie down points
Outer wing kits provide a factory fit
Aluminium edging protection
Supplied pre-assembled for simple fitment
Heavy duty lockable latches
150kg draw capacity
Heavy duty roller bearing system
JAN14
ACCESSORIES
ACCESSORIES
Rear Drawers
PART NUMBER
DRAWERS
PART NUMBER
WING KIT
FITTING
(HOURS)
1998 - 2004
RD80-1000
DW45-016K
2
09/2004 on
RD80-1000
DW45-016K
2
NISSAN
(Series 1,2 & 3)
(Series 4)
TOYOTA
RD80-1000
DW59-022K
2
(Solid Front Axle)
04/1998 on
RD80-1000
DW59-024K
2
(Independent Front Suspension)
1998 on
RD80-1000
DW59-023K
2
2008 on
RD80-1000
DW59-025K
2
Prado 120 Series
(Without Rear Air-Conditioning)
12/2002 - 09/2009
RD80-1001
DW59-028K
2
Prado 150 Series
(Without Rear Air-Conditioning)
10/2009 on
RD80-1001
DW59-029K
2
Prado 150 Series
(With Rear Air-Conditioning)
10/2009 on
RD80-1001
DW59-030K
2
JAN14 Rev.1
xvii
ACCESSORIES
ACCESSORIES
Canopies
PART NUMBER
SLIDE WINDOWS
PART NUMBER
L/UP WINDOWS
FITTING
(HOURS)
FORD
Ranger PX
Dual Cab
Suits 4x4 & 4x2
10/2011 on
CY19-3100
CY19-3150
2.5*
2009 on
CY20-3101
CY20-3151
2.5*
2002 - 04/2012
CY21-3102
CY21-3152
2.5*
GREAT WALL
V200/V240
Dual Cab
Suits 4x4 & 4x2
Rodeo RA/RA7
Dual Cab
Suits 4x4 & 4x2
D-Max
2007 - Mid Year 2012
CY21-3102
CY21-3152
2.5*
D-Max
Mid Year 2012 on
CY21-3104
CY21-3154
2.5*
2008 - Mid Year 2012
CY21-3102
CY21-3152
2.5*
Mid Year 2012 on
CY21-3103
CY21-3153
2.5*
10/2011 on
CY39-3105
CY39-3155
2.5*
09/2009 on
CY43-3106
CY43-3156
2.5*
Navara D22 / NP300 Dual Cab (Thai Built Only) Suits 4x4 & 4x2
2009 on
CY45-3107
CY45-3157
2.5*
Navara D40
09/2005 on
CY45-3108
CY45-3158
2.5*
04/2005 on
CY59-3109
CY59-3159
2.5*
2011 on
CY63-3110
CY63-3160
2.5*
Colorado
Dual Cab
Colorado RG
Suits 4x4 & 4x2
Dual Cab
Suits 4x4 & 4x2
MAZDA
BT50 B32P
MITSUBISHI
Triton MN
Dual Cab
Suits 4x4 & 4x2
NISSAN
Dual Cab, Suits 4x4 & 4x2
TOYOTA
Hilux Vigo
Dual Cab
Suits 4x4
VOLKSWAGEN
Amarok
Dual Cab
FEATURES
»
»
»
»
»
»
»
»
»
»
»
xviii
Available with sliding or lift up side windows
Pressed 0.8mm steel shell construction
Factory colour-coded and baked paint finish
Twin rotary door locks with remote central locking rear door
Includes roof rails (durable epoxy coated) static load tested to 100kg
Fully lined interor with automatic interior light
Internal door safety release
Tinted side windows
Front sliding window
Rear brake light
Rear demister for window
JAN14
Fitting times are an estimate only. * Some vehicles may require additional fitting time for wiring.
Dual BaƩery Trays
LOCATION
PART NUMBER
FITTING
(HOURS)
ACCESSORIES
ACCESSORIES
FORD
LHF Engine Bay
BT19-3200
0.5
Ranger PX*
XLT & Wildtrack Models With Factory Tub Liner (#See Note Below)
10/2011 on
Tub Mount
BT19-3201
0.5
Ranger PX*
XL & XLS Models Without Tub Liner (#See Note Below)
10/2011 on
Tub Mount
BT19-3202
0.5
Rodeo RA/RA7*
2002 on
Tub Mount
BT21-3203
0.5
D-Max*
2007 - Mid Year 2012
Tub Mount
BT21-3203
0.5
D-Max*
Mid Year 2012 on
Tub Mount
BT21-3203
0.5
Colorado*
2008 - Mid Year 2012
Tub Mount
BT21-3203
0.5
Colorado* RG
Mid Year 2012 on
Tub Mount
BT21-3203
0.5
2007 - 09-2011
LHF Engine Bay
BT19-3200
0.5
Tub Mount
BT39-3204
0.5
Ranger PJ / PK
Manual Models Only Without ECU on Left Hand Front Skirt
2007 - 09/2011
MAZDA
BT50
Manual Models Only Without ECU on Left Hand Front Skirt
BT50 B32P*
Models Without Tub Liner
10/2011 on
MITSUBISHI
Triton ML
10/2006 - 08/2009
LHR Engine Bay
BT43-3205
1.25
Triton MN
09/2009 on
LHR Engine Bay
BT43-3205
1.25
09/2005 on
Tub Mount
BT45-3206
0.5
1998 - 2004
LHC Engine Bay
BT45-3207
0.75
09/2004 on
LHC Engine Bay
BT45-3207
0.75
04/2005 on
LHR Engine Bay
BT59-3208
0.5
NISSAN
Navara D40*
Patrol Y61 GU
(Series 1,2 & 3) 4.2L T/D & 3.0L T/D Only
Patrol Y61 GU
(Series 4) 4.2L T/D & 3.0L T/D Only
TOYOTA
Hilux Vigo
2007 on
LHF Engine Bay
BT59-3211
0.75
Prado 120 Series
12/2002 - 09/2009
RHF Engine Bay
BT59-3209
0.5
10/2009 - 09/2013
RHF Engine Bay
BT59-3210
0.5
Tub Mount
BT63-3212
0.5
Under Tray
BT80-3213
0.5
Under Tray
BT80-3214
0.5
3.0L T/D Only
Prado 150 Series
VOLKSWAGEN
Amarok*
2011 on
MULTI-FIT (Under-Tray Style)
Universal To Suit 120ah Battery (Up to 330mm Long)
Requires 445mm x 175mm Mounting Area Under Tray & Hangs Down 320mm
Requires 330mm x 320mm Mounting Area
Under Tray & Hangs Down 250mm
Universal To Suit N70zz Battery
See Page xxi ‘Dual BaƩery Kits’ for Dual BaƩery Management Kit
All trays are to suit 12” N70zz battery size unless noted otherwise.
*Suits vehicles with style-side/well-back/tub. Vehicles with tray/drop-side tray use universal under-tray battery tray.
JAN14
#Vehicle uses smart charge alternator. DC to DC charger must be used on this vehicle or Ford to perform a smart charge disconnect if using EA80-3830.
xix
ACCESSORIES
ACCESSORIES
Air Compressors
DESCRIPTION
PART NUMBER
HEAVY DUTY 12V
CE Approved
»
»
»
»
»
»
Relay and Overheating Protector
Air Flow: 72 L/min - Maximum Pressure: 150 psi
40mm Cylinder
2.4m Power Cable with Battery Clips
5m PU Hose
Inline Pressure Gauge
»
Complete with Fittings & Carry Bag
AC80-3808
DESCRIPTION
PART NUMBER
DELUXE ROOF TOP TENT
Complete with Fitting Tools & Instructions
»
»
»
»
»
Covered Entrance
60mm Thick Mattress
Ladder: Aluminium Retractable 2.0m (Approx)
Fits to Roof Rack or Roof Bars
Removable Elastic Inner Straps to Assist Packup
»
Heavy Duty Waterproof PVC Protector Cover
»
Internal LED Strip Lighting
»
»
Pop Out Window Awnings with Flyscreen
Dimensions: Open 273 x 140 x 130cm - Folded 120 x 140 x 32cm
»
»
»
Raised 420D Flysheet to Allow Airflow, Control Temperature and Minimise Condensation
High Quality 600D Oxford PU Coated Waterproof, Breathable Material
Colour: Beige
DELUXE ROOF TOP TENT WITH BACK AWNING / CHANGE ROOM
CE80-3902
CE80-3924
Fully Enclosed Room (Including Floor) with zip down windows and flyscreens
LADDER EXTENSION FOR HIGH LIFT VEHICLES
CE80-3931
UNIVERSAL MOUNTING CHANNEL (SOLD SEPARATELY)
CE80-3936
Aluminium Mounting Extrusion / Channel (Standard Inclusion in all Roof Top Tents and Awnings)
1.4m long universal slide channel for roof rack and roof bar mounting of accessories
SENSU AWNING
Styled after the Traditional Japanese Sensu Folding Fan
»
»
»
»
xx
Mounted Left Hand Side
Opens 2400
Complete with Poles, Ropes and Pegs
Covers Over 10m2
JAN14 Rev.1
CE80-3903
Maximise Your
4x4 Experience...
DESCRIPTION
PART NUMBER
ACCESSORIES
ACCESSORIES
ROLL OUT AWNING
»
»
»
»
Complete with Poles, Ropes and Pegs
Made from 420D PU Oxford Polyester
Quick Lock Aluminium Poles
600 GSM UV Stabilised PVC Cover
1.4m long x 2.0m out
CE80-3934
CE80-3937
CE80-3904
Driving Lights
DESCRIPTION
PART NUMBER
HID DRIVING LIGHTS
»
»
»
»
»
»
55 Watt / 6,000K High Intensity Discharge
Internal Ballast
8.5” Waterproof Lightweight Housing
Impact Resistant Polycarbonate Lens Cover
Bullbar Friendly Housing Design
Sold as kit (contains: 2 x lights, 2 x clear lens covers and full wiring loom)
Replacement Clear Lens Covers
(also sold separately)
DL80-3755K
Fitting Time:
approx 1.75hrs
Includes Wiring
DL80-3757
LED LIGHT BARS - Single Row
»
»
»
»
»
»
»
10 - 30V DC
5 Watt / 6,000K Cree LED Bulbs
IP67 Water and Dust Proofing
Reversable and Adjustable Mounting Feet
Rubber Insulated Anti-Vibration Mounts
Polycarbonate Lens Cover
Heat Dispursing Dicast Alloy Housing
Fitting Time:
approx 0.5hrs
Using Existing Wiring
10” 30 Watt (6 x 5 Watt bulbs) Led Light Bar Single Row - 2,700 Lumens
DL80-3760
DL80-3761
DL80-3762
40” 120 Watt (24 x 5 Watt bulbs) Led Light Bar Single Row - 10,800 lumens
DL80-3763
JAN14 Rev.1
xxi
ACCESSORIES
The 1st Choice for Recreational &
Serious Off Roaders
ACCESSORIES
Driving Lights
DESCRIPTION
PART NUMBER
LED DRIVING LIGHTS
90 Watt 7” Round
»
»
»
»
»
»
»
DL80-3764K
10 - 30V DC
90 Watt / 6,500K (18 x 5 Watt Cree LED Bulbs)
7,200 Lumens each
PMMA Lens Protector
7” Alloy Bullbar Friendly Housing Design
Sold as a Kit (Contains: 2 x Lights, 2 x Clear Lens covers)
Fitting Time:
approx 0.5hrs
16 Watt 3” Square
»
»
»
»
»
»
»
10 - 30V DC
1,440 Lumens each
PMMA Lens Protector
3” Alloy Housing With Reversible Mount
Sold as Each (Contains: 1 x Light, 1 x Clear Lens Cover)
DL80-3767
Fitting Time:
approx 0.25hrs
12 Watt 4” Round
»
»
»
»
»
»
10 - 30V DC
1,000 Lumens each
PMMA Lens
Can be used to replace Fog Lights as Driving Lights
»
Sold as Each
DL80-3768
Fitting Time:
approx 0.25hrs
(May Require Some Bracket Fabrication, Not Suitable as Fog Lights)
(contains: 1 x Light, 1 x Clear Lens Cover)
LIGHTING ACCESSORIES
Wiring Harness for Light Bar
DL80-3766
(sold separately)
Fitting Time:
approx 1.5hrs
Wiring Harness for LED Driving Lights - Suits 2 Lights
(sold separately)
DL80-3765
Fitting Time:
approx 1.5hrs
2” Pipe Light Bar Mounting Kit
»
»
»
»
»
Heavy Duty Anodised Mounts
Suits 2” (51mm) Pipe
Suits Classic Black & Classic Black Deluxe Top Loops
Suits Stainless Loop Deluxe Outer Loops
Kit Includes 2 Mounts
DL80-3770K
(Excluding BU59-3533 & BU59-3656)
Fitting Time:
approx 0.3hrs
3” Pipe Light Bar Mounting Kit
»
»
»
»
xxii
Heavy Duty Annodised Mounts
Suits 3” (76mm) Pipe
Suits Stainless Loop Deluxe Centre Loops
Kit Includes 2 Mounts
JAN14 Rev.2
DL80-3771K
Fitting Time:
approx 0.3hrs
Dual BaƩery Kits
DESCRIPTION
PART NUMBER
ACCESSORIES
ACCESSORIES
DUAL BATTERY KIT
»
»
»
»
»
»
140 Amp
13.3 Volt Cut In
12.8 Volt Cut Out
Automatic Voltage Sensitive Battery Isolation
Ignition Protected
Dual Display Voltage Monitor (Backlit LCD Screen)
»
»
»
Reversible Display Screen for Overhead & Footwell Mounting
All Installation Hardware Included
All Cables 5m in Length for Rear Mounted Batteries
EA80-3830
Fitting Time:
approx 1.5hrs
(tray fitting not
included)
Displays Both Battery Readings Simultaneously
Does not suit Ford PX Ranger as vehicle is equipped with a
Smart Charge alternator
- Vehicle requires DC to DC charger for dual battery setup
Or
- Vehicle requires Ford dealer to perform Smart Charge
disconnect (may affect vehicle performance & economy)
Dual Battery Voltage Monitor
EA80-3833
(also sold separately)
First Aid Kits
DESCRIPTION
PART NUMBER
FIRST AID KIT
CE & FDA Approved
»
»
»
»
»
»
»
»
»
»
»
»
»
»
»
»
Non-Woven Swab 4 pcs
Adhesive Plasters 3 strips
Butterfly Band Aid 4 pcs
Large Size Band Aid 1 pc
Wet Tissue (Soap) 3 pcs
Wet Tissue (NaCL) 3 pcs
Scissors 5 1/2” 1 pc
Adhesive Tape 1 roll
Tweezers 1 pc
Emergency Blanket 1 pc
Elastic Bandage 1 roll
Safety Gloves 1 pair
Triangular Bandage 1 pc
Safety Pin 6 pcs
Conforming Bandage 1 roll
Plastic Box, PP(21cm x 14cm 7cm) 1 pc
our 4x4
A
ve in Y
Must Ha
FA80-3902
JAN14 Rev.1
xxiii
ACCESSORIES
Experience • Quality • Service
ACCESSORIES
Fridge / Freezer
DESCRIPTION
PART NUMBER
FRIDGE / FREEZER
CE & SAA Approved
»
Utilizes Highest Quality Danfoss Compressor -
»
»
»
»
»
»
»
»
Cooling Capacity of -15°C and can be used as a Fridge or Freezer
Digital Control Panel with Eco Mode
12/24V DC, 240V AC
Integrated Low Voltage Cut-off with Auto Restart
Heavy Duty Handles & Built In Rubber Feet
LED Internal Light with Auto Shut-off
Removable Fridge Basket
High Quality Insulation to Minimize Exterior Sizing but Maximise Internal Capacity
city
Maximum Cooling Efficiency with Minimal Power Drain
40 Litre
Single Zone
FF80-3940
50 Litre
Single Zone
FF80-3950
60 Litre
Single Zone
FF80-3960
80 Litre
Dual Zone (25L/55L Split)
FF80-3980
FRIDGE / FREEZER PROTECTOR BAG
Insulated Protective Bag
40 Litre
FF80-3941
50 Litre
FF80-3951
60 Litre
FF80-3961
80 Litre
FF80-3981
FRIDGE SLIDE
Suits 30/40/50 Litre Fridges
Includes 4x Fridge Straps
4 x Fridge Straps
FF80-3944
FF80-3945K
LiŌing Jacks
DESCRIPTION
PART NUMBER
EXHAUST JACK
CE Approved
»
»
»
»
»
»
»
»
xxiv
High Quality PVC
Lifting Capacity: 4,200Kg
6m High Temperature Exhaust Hose
Triple Protection Layer for both Top & Bottom
Double Layer Protection around Body
Collapses Flat for Easy Storage
Incorporated One Way Valve to Maintain Jack Pressure
Includes 5 Heavy Duty Ground Spikes to Improve Stability
JAN14
EJ80-3810
LiŌing Jacks
DESCRIPTION
PART NUMBER
ACCESSORIES
ACCESSORIES
HIGH LIFT JACK
CE Approved & TUV Approved under AS/NZS 2693:2003
»
»
»
»
1070mm Lift Height
Lifting Capacity: 1,050Kg
Durable Carry Bag
Can Also be used to Pull, Push, Lift and Winch
HL80-3806
Recovery Gear
DESCRIPTION
PART NUMBER
RECOVERY KIT
»
»
»
»
»
»
»
»
»
»
9m 8,000Kg Snatch Strap with Sliding Protective Sleeve
3m 12,000Kg Tree Trunk Protector
Heavy Duty Carry Bag
Heavy Duty Leather Gloves
Waterproof Work Mat (1.6m x 1.4m)
Compact Tri-fold Shovel
Heavy Duty 18,000lb Greasable Snatch Block
2 x 3.25 ton Bow Shackle
2 x 4.75 ton Bow Shackle
Digital Tyre Gauge with Auto Shut-off (psi, bar, kpa & kg/cm3)
RK80-3801
SNATCH STRAP - 9m x 75mm
»
»
»
22% Stretch Factor
8,000Kg
Sliding Protective Sleeve
SS80-3802
IMPORTANT NOTICE:
The minimum breaking strength of
the strap should be between 2 and
3 times the vehicle’s gross vehicle
mass (GVM).
SNATCH STRAP - 9m x 100mm
»
»
»
22% Stretch Factor
11,000Kg
The strap must be suited to the
GVM of the lighter of the 2 vehicles
used in the recovery process.
SS80-3803
JAN14
xxv
ACCESSORIES
ACCESSORIES
Recovery Gear
DESCRIPTION
PART NUMBER
SNATCH BAG
SS80-3805
»
»
Suits all Dobinsons Recovery Straps
SNATCH STRAP KIT
»
»
»
»
»
Heavy Duty Leather Gloves
3.25 ton Bow Shackle
4.75 ton Bow Shackle
9m x 75mm 8,000Kg Snatch Strap
SS80-3804
TREE TRUNK PROTECTOR
»
»
»
SS80-3827
3m x 75mm
12,000Kg
SAND TRACKS
For Recovery from Sand, Mud, Dirt & Snow
»
»
»
»
38 Piece Rubber Traction
1500mm x 300mm Cross Beams
High Quality Stainless Steel Cable
1 Track Complete with Wrap Bag for Easy Storage
ST80-3812
Grips like bulldozer tracks
RECOVERY HITCH
»
»
»
Tested to Australian Standard AS2741-2002
Made of High Strength Zinc Finished Steel
Fits Most Towbars
BOW SHACKLE
4.75 Ton Heavy Duty
SNATCH BLOCK
18,000lb Greasable Heavy Duty
RK80-3807
RK80-3828
SB80-3825
ACCESSORIES BAG
»
»
»
xxvi
Approximately 550mm x 180mm x 300mm (25L)
Multiple Pockets, ‘Carry More’ Design
JAN14
RK80-3829
Tyre Accessories
DESCRIPTION
PART NUMBER
ACCESSORIES
ACCESSORIES
DELUXE TYRE REPAIR KIT
Quick Repair - No need to remove the tyre
»
»
»
»
»
»
»
»
Digital Tyre Gauge
Steel Insertion Needle
Hardened Steel Reaming Tool
30 Self Vulcanising Tyre Seals
Lubricant
2 Allen Keys
Valve Core Tool
Spare Valve and Valve Caps
TYRE REPAIR CORDS
To Suit Deluxe Tyre Repair Kit
TR80-3809
TR80-3816
RAPID TYRE DEFLATOR
Removes valve stem to allow tyre deflation up to eight times
quicker than conventional methods
»
»
»
»
TR80-3837
Includes Carry Case
Corrosion Resistant Brass Fittings
Quick Release Coupling Allows Pressure to be Checked at Any Time During Deflation
0 - 60 psi Gauge with 1 psi Increments
JAN14
xxvii
NOTE
ACCESSORIES
ACCESSORIES
Winches
DESCRIPTION
PART NUMBER
HAND WINCH
CE Approved & TUV Approved
»
»
»
»
HW80-3811
Aluminium Light Weight, Corrosion Resistant Winch Body
1,600Kg Capacity
20m High Strength Galvanised Cable
ELECTRIC WINCH
CE Approved
xxviii
»
12V Compatible
»
Fully Sealed Single Solenoid
»
Steel Cable & Synthetic Rope Options
»
Winch Housing Breather
approx 1hr
»
Heavy Duty Gloves
»
Hand Held Control & Wireless Remote
(fitting with bullbar
installation)
»
Rotating Ring Gear Clutch
»
64 x 224mm Drum
»
Automatic Braking Action
»
3 Stage Planetary Gears
»
Full Face Contact Drum Seals, Motor & End Housing
Gaskets to Provide Extreme Water Resistance
JAN14
Fitting Times:
approx 1.75hrs
(fitting to existing
bullbar)
Wireless Remote Not Covered Under Warranty
Celebrating 60
Est. 1953 years of Australian
Manufacturing
Winches
DESCRIPTION
PART NUMBER
ACCESSORIES
ACCESSORIES
SYNTHETIC ROPE
»
»
»
»
High Grade Dyneema SK75
Ultra Light to Reduce Front Axle Weight
Includes Rope Protector
Stronger than Steel Cable
30m x 10mm
14,200lb (Requires EW80-3823)
EW80-3821
30m x 11mm
18,000lb (Requires EW80-3823)
EW80-3822
ALUMINIUM FAIRLEAD
Compatible with Most Bullbars
»
»
»
Manufactured from Precision Formed Aluminium
Suits Synthetic Rope
Assists in Preventing Pinching, Kinks and Frays Normally Associated with Guiding Rope
Large Body Synthetic Rope Winch Hook
EW80-3820
EW80-3823
Damper Blanket
»
»
»
Manufactured from High Quality PVC
Long Internal Velcro Straps to Reduce Slipping
Specifically Designed to Absorb the Maximum Amount of
Potential Energy in the Event the Rope / Strap Should Break
DB80-3813
JAN14
JAN1
N1
14
xxix
ENJOY THE RIDE...
...RIDE TO ENJOY
TERMS OF SALE
SPRING & SUSPENSION
Terms & Conditions
of Sale
TTerms
erms & CondiƟ
CondiƟons
ons
Interpretation
In these Terms and Conditions of Sale (“Terms”), “Goods” means the goods subject of the Contract; “Dobinsons Spring & SuspensionTM”
means the entity selling the Goods; “Client” means the entity purchasing the Goods; “Contract” means each contract between Dobinsons
Spring & SuspensionTM and Client for the sale and purchase of Goods.
Title
Title to the goods will not pass to the Client until the following is completed:
1.
Dobinsons Spring & SuspensionTM being paid in full under all Contracts.
Until the Goods pass to Client, Client must:
1.
Hold the Goods as bail for Dobinsons Spring & SuspensionTM and keep them in good order and condition; and
2.
Not remove any markings placed by Dobinsons Spring & SuspensionTM and ensure that the Goods can be readily identified and
distinguished from other property in Client’s possession; and
3.
Deliver the Goods to Dobinsons Spring & SuspensionTM immediately upon demand and, for this purpose, Dobinsons Spring &
SuspensionTM is authorized to enter at any time any premises in which the Goods may be located (the costs incidental to which will
be borne by Client).
Quotations & Orders
Any quotation made by Dobinsons Spring & SuspensionTM will not be construed or operate as an offer or obligation to sell. Dobinsons Spring
& SuspensionTM reserve the right to accept or reject in its absolute discretion any order received. Client will not be entitled to cancel or
refuse delivery of, or payment for, any order made by him, which has been accepted by Dobinsons Spring & SuspensionTM.
Price
The price payable to Dobinsons Spring & SuspensionTM by Client for the Goods will be the price agreed, failing which it will be the price
prevailing at the date the Goods are dispatched by Dobinsons Spring & SuspensionTM for delivery to Client. Prices are payable in Australian
currency and exclusive of delivery costs, taxes, duties and other imposts which, if chargeable, are payable by Client. Prices quoted in any
Dobinsons Spring & SuspensionTM price list are suggested prices only and may be changed by Dobinsons Spring & SuspensionTM without
notice.
Payment
All Goods will be paid for in full before receiving or dispatching of Goods from Dobinsons Spring & SuspensionTM unless previously arranged.
Damage
Buyer acknowledges that the Goods leaving Dobinsons Spring & Suspension’s premises are adequately packed. Claims for damage in transit
must be made against the carrier and, while Dobinsons Spring & SuspensionTM will not accept liability for any damage, details of any claim
must be promptly advised to Dobinsons Spring & Suspension M. Prior to acknowledging delivery to the carrier, Client must ensure that the
complete consignment has been received as specified in the carrier’s note. Any shortage or visible damage to outer packaging must be
endorsed on the carrier’s note. Any shortages and/or damages must be reported to Dobinsons Spring & SuspensionTM within 72 hours of
receipt.
Implied Terms, Limitation of Liability & Client Indemnity
Subject to these Terms, Dobinsons Spring & SuspensionTM will not be liable for any loss, damage, expense or injury of any kind or nature
suffered or incurred by Client or any other person, arising out of or in connection with, the Contract (including, without limitation, liability
due to negligence or wilful default of Dobinsons Spring & SuspensionTM and any delay in delivery) or any error (whether negligent or not)
in information supplied to Client in connection with its subject matter or the use, possession or delivery of the Goods or the exercise by
Dobinsons Spring & SuspensionTM of its right under Breach by Client will indemnify Dobinsons Spring & SuspensionTM in relation to any such
loss, damage, expense or injury.
Force Majeure
Despite any other term or condition of the Contract, Dobinsons Spring & SuspensionTM will not be liable for any loss, damage, expense or
injury of any kind or nature suffered or incurred by Client or any other person, arising out of or in connection with any delay in delivery, or
failure to perform any other term or condition of the Contract where that delay or failure is caused by an act of God, fire, labour dispute, civil
commotion, intervention of a government, inability to obtain labour, materials or manufacturing facilities, accidents, interruptions of or delay
in transportation or any other cause beyond Dobinsons Spring & Suspension’s reasonable control.
Breach by Client
If Client breaches a Contract or Dobinsons Spring & SuspensionTM is not satisfied of a Client’s ability to pay or otherwise comply with each
Contract, Dobinsons Spring & SuspensionTM may by notice to Client, but without compensation, terminate every Contract, suspend or cease
deliveries under all Contracts, set-off all deposits against amounts due and make all amounts then outstanding by Client to Dobinsons Spring
& SuspensionTM immediately due and payable.
Errors and Omissions
Dobinsons Spring & SuspensionTM has the right to correct any clerical errors or omissions, whether in computation or otherwise in any
quotation, acknowledgment, or document forming part of a Contract. Although care has been taken to ensure the accuracy of the data
contained in this publication, Dobinsons Spring & SuspensionTM does not assume any liability for errors or omissions.
xxx
JAN14
ENJOY THE RIDE...
...RIDE TO ENJOY
SPRING & SUSPENSION
TERMS OF SALE
Terms & Conditions
of Sale
Warranties
Dobinsons Spring & SuspensionTM at its sole discretion will repair or replace any products supplied by them that are found to be defective
in either materials or workmanship providing that Dobinsons Spring & SuspensionTM are actually notified in writing from the Client of
the alleged defect within two years (2 years) from date of invoice for Coil Springs, Leaf Springs and Shock Absorbers, and within twelve
months (12 months) from date of invoice for all other parts. Any claim not made within this period shall conclusively be deemed waived
by the Client. Repair or replacement is pre-conditioned on the examination of the goods which on instructions from Dobinsons Spring &
SuspensionTM on, should be returned for further inspection to Dobinsons Spring & SuspensionTM or to an Approved Importer.
Coil Springs listed in this catalogue have a 2 year warranty against the following:
1.
Faulty Manufacture
2.
Breakage
3.
Sagging (being loss of free height of more than 10mm).
Leaf Springs listed in this catalogue have the 2 year warranty against the following:
1.
Faulty Manufacture
2.
Breakage
3.
Sagging (being the loss of free camber by more than 12mm).
Shock Absorbers listed in this catalogue have a 2 year warranty providing the vehicle does not have a modified exhaust system.
Fridges listed in the catalogue have a 5 year warranty on the motor and a 1 year warranty on all other parts against:
1.
Faulty Manufacture
Winches listed in the catalogue have a 2 year warranty agains:
1.
Faulty Manufacture
All other accessories listed in the catalogue have a 1 year warranty against:
1.
Faulty Manufacture
Dobinsons Spring & SuspensionTM products are designed for normal use and are in no way, covered under warranty should the vehicle be
used in any form of extreme sports, competition racing or produce lift of 50mm or more. It is the responsibility of the fitter, to ensure
that the customer or the owner of the vehicle is aware of the warranty conditions under which the products have been sold. It is highly
recommended that the words ‘Suspension Components Fitted are for Normal Use Only. Warranty Void if used in extreme conditions” is
written on their receipt to avoid any confusion.
Dobinsons Spring & SuspensionTM will not pay for costs incurred in forwarding or returning goods. This warranty does not cover and
Dobinsons Spring & SuspensionTM makes no warranty with respect to; (1) any merchandise that is abused, misused, misapplied, neglected or
altered; or that is improperly or incorrectly installed or maintained or used; or that is subjected to abnormal conditions of use, temperature,
moisture, dirt or corrosive matter; (2) Goods bought for industrial, mining or agricultural use; (3) Goods no longer required by Client; (4)
Goods incorrectly chosen by Client; (5) Goods modified or altered by client; and (6) any merchandise, materials, parts or other components
supplied by someone other than Dobinsons Spring & SuspensionTM.
Dobinsons Spring & SuspensionTM shall not be liable for any expenses incurred by Client in order to remedy any defect in its product.
Dobinsons Spring & SuspensionTM shall not be liable for any consequential, special, indirect or contingent damage or expense arising Directly
or Indirectly from any defect in its products or from use of any products.
Client agrees to indemnify and hold Dobinsons Spring & SuspensionTM harmless from and against any loss, injury or damage, to person or
property, that extends beyond the warranties set forth above, whether the claims against Dobinsons Spring & SuspensionTM or the damages
are incidental or consequential.
Installation of aftermarket items to your vehicle may adversely affect, void or violate the Manufacturers terms of warranty on your vehicle.
Review the terms of your vehicle warranty prior to purchase and/or installation of any aftermarket part or accessory. Dobinsons Spring &
SuspensionTM does not make any representations or warranties of any kind as to suitability or fitness for a particular vehicle or purpose.
Dobinsons Spring & SuspensionTM shall not be responsible or liable for direct or indirect damages as a result of the purchase and/or
installation of these aftermarket products.
Terms and Condition
The only terms of the Contract are those agreed to in writing by Dobinsons Spring & SuspensionTM, these Terms (to the extent they are not
inconsistent with terms agreed to in writing by Dobinsons Spring & SuspensionTM) and those which are implied or imposed by law (including
the Trade Practices Act 1974) to the extent that it is not lawful or possible to exclude them. All other terms, conditions and warranties
are expressly excluded. If a conflict arises between the terms of any order made by Client and these Terms, these Terms will prevail. An
agreement to deliver the Goods in installments is taken to be separate Contract for each installment. The laws of Queensland govern these
Terms and Conditions and any Contract that includes them and Dobinsons Spring & SuspensionTM and Client submit to the jurisdiction of the
courts of the State. If a term is held to be unenforceable, the remaining terms will apply.
Dobinsons Spring & SuspensionTM will not be liable to the Client in the event that delivery of goods is delayed irrespective of the cause.
JAN14
xxxi
ENJOY THE RIDE...
...RIDE TO ENJOY
SUSPENSION
SPRING & SUSPENSION
Manufacturers &
Suppliers of 4x4
Suspension Components
Dobinsons Spring and SuspensionTM is a Coil and Leaf Spring manufacturer, establshed since 1953.
As well as manufacturing high quality 4WD coil and leaf springs we also supply a complete range of
4WD suspension components.
Our range of 4WD shock absorbers, steering dampers, greasable shackles, u-bolts, polyurethane
bushes, panhard rods etc... are of the highest quality.
xxxii

4WD Accessories.indd

Transcription

Similar documents

Products - Linextras

Bronica SQ-B Brochure

CAPANNOLI COMPANY PROFILE

7.49 $6.99 $2.99 $2.49 $7.99 $8.99 $1.99 $4.99 $1.99

10 % off voucher - Computer Accessories Shop

4x4 Sprinter - Rossetts Commercials

Fitting Guide Hints and Tips

sponsorships

Ods Lloyd Flanders April 24