Special Topic “Russian Federation”

2013. Vol.12
Special Topic “Russian Federation”
Major Power of Eastern Europe
with the World’s Largest Land.
The Russian Federation is the
country that boasts the world’s
largest area at 17.09 million sq.
kilometers.
From the Baltic Sea to the Pacific
Ocean, the country that extends
10,000 kilometers and spans 9 time
zones from east to west, where up
to nine hours of time difference exist
by region.
With population and industry
concentrated in the western area
near Europe, and as a result of its
cultural ties, Russia is classified as
part of Europe in general.
At the sametime, the country
spreads across to the Asia with the
Ural Mountains, which is cutting
across Russia, crossing over 2000
km from north to south, creating a
borders between Europe and Asia.
In Russia, a great portion of which
is in the subarctic zone, the cold of
winter is very severe, and in the city
of Oymyakon, an especially wellknown town in the Siberian
permafrost, the temperature of
minus 71.2 deg. C was recorded in
1926.
In the capital of Moscow, although
the average low temperature in
February is minus 9 deg. C,
(average for 1981 to 2010) it can
rise above 30 deg. C in summer
and you can see children playing in
fountains enjpying the precious hot
summer days.
①
Landscape of Russia
②
02
③
④
Landscape of Russia
Rapid economic expansion fueled
by abundant resources
The Soviet Union collapsed in 1991,
and the Russian Federation, which
introduced a market economy, has
achieved rapid economic growth,
particularly since 2000 with GDP
growth rate over 4.5% from 2000 to
2011.
Russia has promoted free trade by
participating in the WTO (World
Trade Organization), aiming at
further economic development.
Abundant natural resources,
starting with petroleum enabled
Russia to achieve rapid economic
growth. Russia is second in the
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
world production of both petroleum
and natural gas, and is also blessed
with metal resources such as iron,
copper ore and nickel.
Local traditions are alive
while European culture is embraced
Indicative of Russia’s good
economy, in the capital city of
Moscow there are many Western
luxury cars, and it has come to be
known as one of the countries with
the highest prices in the world.
The storefronts are filled with
imported goods from Europe, from
foods to daily sundries, and no
vestiges of the Soviet era
distribution queues for purchasing
black bread.
While Russia is coming to accept
European culture, tradition lives on
in the daily life and food culture of
the people. The lifestyle of enjoying
a family vegetable garden at the
“dacha” out in the countryside on
the weekends and on long holidays
is unchanged even now.
What is more, “borscht”, which is a
vegetable soup with a beet base,
and the “piroshki” bread side dish,
beef stroganoff, and “pelmeni”
Russian-style steamed dumplings,
are loved both in Russia and world
wide.
① Moscow-City with skyscrapers lined up along the
Moskva River. The area is currently under development
as a new business center in Russia.
② The Kremlin, center of Russia's politics, religion, and
culture. Uspensky Cathedral, which was the state
cathedral during the Russian Empire (left side of the
photo), and the Ivan the Great bell tower, which stands
81 M tall and was erected in 1508 (right side of the
photo).
It was the tallest building in Moscow at the time.
③ Red Square, which has the meaning of "beautiful
square.", together with Lenin's Tomb, where Lenin lies,
is a symbol of the socialist system in the past.
Nowadays, all sorts of events are held there, and it's
beloved as place of recreation for the public.
④ An ornately decorated department store. In the show
window, there are products arrayed from Russia and
abroad, and it's crowded with people enjoying
shopping.
⑤ The National Academy Bolshoi Theater, Russia's
represent ballet and opera theater.
⑥ The statue of Dostoevskii, a symbol of the Soviet era,
stands vigilant over the people even today.
⑦ Beautiful wall paintings and ornamentation adorn a
station of the Moscow subway.
⑧ Small shops that are invariably located inside stations
or on street corners sells not only drinks and magazines,
but also all kinds of including such things as clothing and
toys.
⑨ Massive apartment building, built in the Soviet era, still
standing.
⑩ A trolley bus, indispensible as a means of transport for
the public.
⑪ Traditional foods---kasha, a buckwheat gruel, and
piroshiki.
⑫ Borscht, the vegetable soup that epitomizes Russian
cuisine.
⑬ Okroshka, a soup that uses chilled kvass, a drink made
from fermented black bread. It’s characterized by a
distinctive sourness.
⑭ Landscape of Ekaterinburg, in the center of Russia.
The Ural Mountain Range is visible on the horizon.
⑭
⑬
03
BREAKTHROUGH COMPANIES
Group of Companies Danone Unimilk
Hitachi Ink Jet Printers support Danone ─ a world
famous dairy brand ─ by providing stable production
under the strictest quality control environment in Russia.
Group of Companies
Danone Unimilk
Danone Industria, Russia, Chekhov
Maintenance Manager
Mr. Igor Sandalov
In 1919 , in the City of
Barcelona, Spain, a small
yogurt factory was
established.
The yogurt plant, under the
name of“Danone”(which was
taken from the nickname of
Daniel, the son of the founder
Mr. Isaac Carasso) later
moved its headquarters to
Paris and grew into an
international food products
enterprise included affiliated
brands such as“Evian”mineral
water and“LU“ cereal.
This time, we visited the
Chekhov Plant of the Group of
Companies Danone Unimilk in
Russia.
Danone dair y products
Over 20% market share
The Danone Unimilk plant is
situated one hours drive to the
south of Moscow, within a dairy
04
The Chekhov Plant of the Group of Companies Danone Unimilk is in the suburb of
Chekhov, Moscow. With its modern facilities, it boasts the largest production
capacity within the company.
farms region covered with rich
greenery.
Danone first entered into the
Russian market in 1992 to
import the products they
produced in Europe.
Delicious and safe, and with its
refined package design,
Danone products have been
welcomed by Russian
consumers, and it become a
brand you can see at every
Russian Breakfast.
In response to the growing
Russian market demand,
together with the start of
Russian domestic production,
Danone merged with the
Russian dairy products
producer Unimilk, and
expanded its production
capacity.
Throughout the country, 30
factories have been set up and
are producing over 130
products.
Not only for the domestic
market, these products are
also exported to neighboring
countries.
The Chekhov Plant, which we
visited, has the largest
production capacity in the
Group of Companies Danone
Unimilk.
It can produce maximum 800
tons of dairy products per day
-yogurt 19 %, soft cheese
29 %, and yogurt drink 34 %.
At Danone, to match the
diverse tastes and needs of
consumers, they are
developing products
independently in each sales
country.
From the taste to the bottle
shape and then to the package
design, the products sold in
Russia are no exception;
basically these are“Russian
original,”planned and
developed in Russia.
S afe and delicious products
Created under strict quality
control.
What sort of approach does the
Group of Companies Danone
Unimilk take in producing dairy
products in Russia, where a
vast land area of approx. 9000
km from east to west, and for
delivering them to the
consumer while they are fresh?
We heard from Mr. Igor
Sandalov, the Maintenance
Manager of Group of
Companies Danone Unimilk.
“To deliver delicious and safe
products to the customer, we
must meet the quality
standards set by the Russian
Government, and in production
we also follow an even more
strict independent quality
assurance system.
As part of this, we would like to
introduce a system which we
call the“3 -day Guarantee”.
We pick a sample of our
products, keep them in a
special environment for three
days and inspect whether they
comply with our company’
s
quality control or not. If they
cannot meet the standard, all
the products including the
already shipped portion are
immediately removed from the
market. In this way, we always
provide safe products to the
customer – by checking the
actual products under a special
environment.
Moreover, with respect to
expiration dates, Danone sets
shorter time than those of
other manufactures, this is a
proof that the‘yogurt is alive.’
”
H itachi Ink Jet Printers
to high-speed lines
Hitachi Ink Jet Printers support
the strict quality controls of
the Group of Companies
Danone Unimilk.
There are 40 Ink Jet Printers
under operation at the Chekhov
Plant for printing the expiration
date and quality control
information on the finished
product package.
We understand that the reason
for installing Hitachi Ink Jet
Printers were their great
adaptability to high-speed
lines.
We heard from Mr.Alexey Trach,
①
②
③
① Based on Danone's proprietary strict quality controls, safe and delicious products are produced.
② The products are primarily for the Russian market and are“Russia original”planned and developed in Russia.
③ Beautiful package design is one of the special things about Danone products. It boasts a broad lineup from fruit flavoured yogurt to cereal-combination products.
05
There are 40 units of the PXR-H450 W models in16 lines. Ingenuity has been employed by memorizing the print settings on each
line in all of the Ink Jet Printers to enable swapping and repositioning the lines.
the Packaging Maintenance
Manager of Group of
Companies Danone Unimilk.
“Actually, in the past we were
using Ink Jet Printers from
another manufacturer , but
when we increased the
package line speed, we had
trouble with the print quality.
Then we consulted with
Forintek and were advised to
try with the Hitachi Ink Jet
Printers. As a result of our
tests, we found no printing
problems. We got a feel for its
capacity to adapt well to a highspeed line. Thus we decided to
switch to Hitachi Ink Jet
Printers at the Chekhov Plant.
Currently, there are 40 PXR
①
series Ink Jet Printers on 16
package lines. These are all
PXR-H450 W models for highspeed printing..
“We decided to standardize
with the PXR-H450 W, the highspeed printing machine, for
reasons of compatibility. The
high-speed package lines that
can handle a maximum of
36 ,000 boxes per hour are
limited so there was no need to
renew all the 40 units with the
high-speed printing machines
but giving consideration to
r e p o s i t i o n i n g t h e l i n e s and
backup in the event that
trouble were to arise with the
Ink Jet Printers, we decided to
purchase all PXR-H450 W
②
④
③
⑤
① Hitachi Ink Jet Printers can provide stable printing on high-speed lines.　②③ The clear printing
is free from spreading or misalignment.　④ The operating panel displays Russian language and
has an easy to use interface. ⑤ We sell Hitachi Ink Jet Printers in 108 countries. We work hard
to bring attractive products to our customers around the world; the multi lingual operation
manuals are one of the examples.
06
models.”
S uperior reliability and
durability Backing up stable
production
Customer chose Hitachi PXR
series for its capacity to highspeed lines. So how is the user
evaluation for Hitachi Ink Jet
Printers?
We heard from Mr. Eduard
Poveljev, Packaging
Supervisor of the Group of
Companies Danone Unimilk.
”
We don’
t have any trouble with
Hitachi Ink Jet Printers despite
the environment of high heat
and humidity. It supports
stable production.
BREAKTHROUGH COMPANIES
The PXR-H450W is inserted into a package line that is
capable of a maximum of 36,000 units per hour. Superior
reliability and durability minimize downtime and support
stable production. At the same time, maintenance cost
control is achieved.
When we were using the Ink Jet
Printers of another
manufacturer we often had
trouble, and the staff who were
in charge of maintenance
always wore clothes stained
with black ink.
Since we adopted the Hitachi
Ink Jet Printers, the downtime
has been dramatically reduced,
and as the person in charge of
the package line, I am
comfortable with using it.”
The maintenance costs of Ink
Jet Printers have come down,
since service requests have
decreased compared with our
Danone Industria, Russia,
Chekhov
Packaging Superviser
Mr. Eduard Poveljev
previous supplier. Superior
reliability and durability, which
characterize the Hitachi Ink
Jet Printers, have realized less
downtime together with
running costs.
At Hitachi Industrial Equipment
Systems, to offer our superior
Ink Jet Printers to customers
all over the world, we
aggressively conduct a design
that takes into account all
sorts of different user
environments which can differ
according to the country and
region together with multi-
Danone Industria, Russia,
Chekhov
Packaging Maintenance Manager
Mr. Alexey Trach
language handling capabilities.
Currently customers in 108
countries are using our
products.
With the feedback of the Group
of Companies Danone Unimilk
this time, Forintek and Hitachi
Industrial Equipment Systems
will work hard to develop even
more attractive products and
support system for the future.
Comments from the person in charge of Hitachi Industrial Equipment Systems products
FORINTEK Mr.Slava Averin
Hitachi Europe GmbH
I have worked for over 20 years in the continuous ink jet printers
industry. I feel Hitachi Ink Jet Printers are the most reliable and
durable machine with decent technical potential. Our Hitachi users
don’t have much complains. Most of them have been previously
using different continuous ink jet printers but trying Hitachi brand,
they switched without much hesitation. We are very pleased to
representing Hitachi.
Distribution Manager Inkjet
FORINTEK Mr.Alexander Stepanov
Hitachi is widely known and has an excellent reputation in Russia.
Our progress to the market of ink jet printers has been rapid. Hitachi
Ink Jet Printers work well at high speed, and are efficient due to their
intuitive interface. We created some of our best marketing and
advertising campaigns ever for Hitachi, which resulted in lots of
sales. It has been a great adventure and I look forward to continuing
to promote Hitachi Ink Jet Printers to our market.
Mr.Juergen Gerigk
In 2005, Forintek sold the
first Hitachi Ink Jet Printer
in the Russian Mar ket.
Within the years, Danone
became their biggest
customer, counting with
more than 40 high-speed
machines. The reliability of the machines and
the excellent service provided by Forintek
suppor ted Danone to become one of the
biggest manufacturers of dairy products in
Russia today. Within the years Forintek created
an atmosphere of trust. We are proud of having
provided excellent technical solutions and are
pleased to attend Danone’s growth in Russia.
07
Episode No. 2
From our Works
In design,
“customer’s viewpoint”
is the most important.
Air Compressor Design Dept.
Department Manager
Masaaki Toda
100th Anniversary of
Hitachi Air Compressors
~ Jump up
to the Next Stage ~
Its been 100 years since the first
air compressor produced in
Japan. Its a legacy left to us from
our predecessors over the many
years. Thanks to them, our air
compressor business has grown
to boast the domestic top share,
but with our sights set on the
world, we still see room for
growth. Reaching this milestone
year, we will accelerate our
growth more globally. In addition
to China and Southeast Asia, we
will take aggressive approaches
to countries where we have not
expanded yet.
Whether being in different
countries and areas, what
customers looking for in common
in air compressors is high energy
10
saving performance. Of course,
since energy saving is our
greatest strength, we are
confident in our ability to offer
products that will satisfy the
customer. On the other hand,
talking about the current
domestic market, mid-sized
machines and general purpose air
compressors manufactured in the
Hitachi Industrial Equipment
Systems Shimizu Works is being
shipped out to the Tohoku area;
northeastern Japan where the
earthquake hit. Its our pleasure to
contribute to reconstruction of
Tohoku area. We hear there are
many customers who switched
to our products after using
overseas compressors.
It may be indirect contribution,
but if we can serve to
“reconstruction,”through our
products even to a small extent
we feel very much honored.
For our 100th anniversary, from
this year until the end of the year
we are running the“Challenge
165”
air compressor campaign,
exerting further efforts into our
promotion to domestic sales.
Customer satisfaction
through skillful design
After working in the design field
for 25 years, I have a special
product in mind. That is the
world's first air compressor with
an on-board inverter. I now have
great memories of the days
spent on designing and
developing this compressor.
Compared to the current
products, there was a clear
difference in performance, but
timed for the era of the
switchover to energy-saving, it
was very rewarding work. Thinking
back, now I feel the customer
point of view is the most
important thing to design. It is to
satisfy the customer in terms of
cost, features, performance,
durability, and so forth. In the
case of air compressors, the
customer is the actual end user
that uses the product, as well as
the dealer and retailer along with
the department that carries out
maintenance. Skillful design
satisfies every customer. The
business cycle in general for the
air compressor is from production
to sales and through
maintenance to replacement.
Customer point of view is
necessary to carry on this“Cycleoriented business”in a
sustainable way. I wish young
designers understand this
(smile).
Deepening the
Manufacturing
Technology
In recent years, we have seen
numerous requests for solutions
such as to recover the heat given
off in the operation of air
compressors, to pursue energy
savings and so on. We do
conduct R&D in response to the
requests of customers, but there
are constraints unique to air
compressors. Because the
percentage of customers who are
replacing compressors is high,
we can't change the size of the
package (exterior shape of the
product) or the placement of
piping from that of the existing
product. If we make it smaller
because we can make it
compact, we could conceivably
cause inconvenience to the
customers. Then, is there no
innovation in air compressors?
That's not the case. There's the
“HISCREW NEXT　series”, which
is an oil injection screw air
compressor developed jointly with
our Narashino works that's been
added to our existing product
lineup. We have developed
motors and inverters in house
especially for air compressors
and that improved energy
savings, environmental
performance, and maintainability.
Our manufacturing career is
deepening our technology and
that leads to creating new
products. Bringing together the
strengths of our technology and
Finished rotors are measured individually with threedimensional indicator.This leading edge equipment
can measure down to the micron level.
know-how we are able to reduce
costs while improving functions.
Assessing the future of the
market, we would like to increase
the current share of Hitachi air
compressors in worldwide,
beyond what it is today.
Rotor fabrication equipment, of which there are only two in the world, are at Shimizu
Works. The heart of the Hitachi air compressor is born here.
A Hitachi air compressor OSP series rotor before installation in the product,
beautifully polished.
11
Hitachi Europe, Ltd.
http://www.hitachi-eu.com
Hitachi Europe Ltd.
Whitebrook Park,Lower Cookham Road
Maidenhead,Berkshire, SL6 8YA
U.K.
Tel: +44 1628 585000
Fax: +44 1628 585373
Hitachi Europe Ltd., is a wholly owned subsidiary
of Hitachi, Ltd., Japan. Headquartered in
Maidenhead, UK, it has operations in 13 countries
across Europe, the Middle East and Africa and
employs approximately 550 people. Hitachi Europe
comprises of nine business areas: rail systems;
power and industrial systems; information
systems; digital media and consumer products;
display products; industrial components and
equipment; air conditioning and refrigeration
systems; manufacturing systems; and
procurement and sourcing. Hitachi Europe also
has three Research and Development laboratories
and a design centre in Europe.
Hitachi Europe GmbH
Industrial Components and Equipment Group
Am Seestern 18
D-40547 Düsseldorf Germany
Tel.: +49 211 5283 0
Fax: +49 211 5283 649
HP: http://www.hitachi-ds.com
The representative of Hitachi Industrial Equipment Systems in
Europe is Hitachi Europe GmbH, ICEG group.
ICEG markets and distributes components for Industrial
Automation, Ink Jet Printers for coding and marking, Electric
Chain Hoists, Submersible Motors and Air Compressor
technology among others.
12
Hitachi Moscow office
Lieison office of Hitachi Europe GmbH
Moscow
FORINTEK
123592, Russia,Moscow,Kulakova St.,20,bld.1G
Tel : +7 495 757 9525
Fax : +7 499 740 2247
FORINTEK is the distributor of Hitachi Ink Jet Printers in Russia.
Since 1993, it has been actively working on promotions of the
most advanced packaging machineries from abroad to the Russian
market.
The lineup ranges from different types of industrial marking and
labeling machineries to shrink / stretch sleeve machineries. It
also provides cost-effective solutions to packaging problems;
professional advice and proficient technical service to customers.
Now Forintek is one of the largest and well-known Russian
distributors for the equipment mentioned above, operating from fully
integrated distribution centers in Moscow, Saint Petersburg and
Krasnodar.
PNEVMOMASH
Kosmonavtov av. 15, of. 405
Yekaterinburg, 620017, Russia
Tel/Fax : +7 343 311 08 01(02,03,04)
PNEVMOMASH is the distributor of Hitachi Air Compressors in
Russia. Founded in 1994, it specialized in sales, service and repair
of air compressors, compressed air systems, diesel generators and
welding machines.
The mission is to provide effective and high quality solutions for
clients through professional engineering, mutual understanding and
relations with customers.
The 17 years of professional experience allows the best services
to all customers from small private companies to the federal
enterprises.
13
Products Lineup in Russia
Programmable Logic Controllers
Hitachi PLC meets customer needs by
providing various models such as H series,
which has a long-term sales history for more
than 20 years, all-in-one compact PLC MICROEH / MICRO-EHV series, and multiple and high
function PLC EH-150 / EHV / EHV+ series.
Our PLCs are used for a wide range of
applications today such as production facilities,
plant monitoring and control, multistory car
park, energy monitoring at plants, shopping
stores and so on.
Ink Jet Printers
The Hitachi RX Series industrial small character
high-speed printer, categorized as a non-contact
marking system, prints various product information
directly on various substrates such as metals,
plastics, rubbers, films and papers. 2D codes
such as Data Matrix and QR code printing are also
available with RX series. The Hitachi RX Series
offers the consumer superior print quality, reliability
and overall performance.
Air Compressors
Since started with 75kW piston-type compressors
in 1911, Hitachi has accumulated technology
and now answers to a higher economic efficiency
and reduction of environmental burden for every
customers.
Our NEXT series offers perfect solutions for various
industries.
News The oldest and longest operationed Hitachi air
compressor is now on display at Shimizu Works.
Hitachi air compressor's history goes back to
1911, starting with the first 100 HP horizontaltype reciprocating air compressor delivered to
Hitachi Mines.
At the time, air compressors were invariably
deployed at hydroelectric and thermal power
stations construction sites and at the main
stations of the National Railway (now JR).
In addition, many Hitachi air compressors have
been used in the automobile industry and several
hundreds of the OS type units have been used in
Bullet Train operations.
The age changed from coal to heavy industry,
infrastructure industry, automotive industry, and so
The HTC-IMC 400HP(300kW horizontal-type
reciprocating air compressor made 589 km
journey from the Yasugi Plant of Hitachi Metals,
Ltd. and has been installed at the Shimizu Works.
did the Hitachi air compressors. We have been
constantly conducting development with advanced
technology to give Hitachi air compressors more
compactness, higher performance, and better
energy savings, and contributing to the
development of industry.
With Hitachi Air Compressor's 100th Anniversary
last year, a 1938 Hitachi air compressor that had
still been in operation was handed over to us by
Hitachi Metals　Co., Ltd., and has been displayed
at the Shimizu Works.
When you have a chance to visit the Shimizu
Works, please take a look at this histric
compressor.
This air compressor, which was on active duty for about 72 years, is infused with the thoughts of the
engineers engaged at that time.
Toward a new 100 years, this commemorative display has been realized.
15
1. Trade Show Name 2. Date 3. Place 4. Trade Show HP address 5. Products
1. AICD
2. June 2-4, 2013 3. Nashville, TN
4. http://www.aicd.org/meeting.htm
5. Air Compressor
1. St. Petersburg Technical Fair
2. March 12-15, 2013 3. St. Petersburg, Russia
4. http://ptfair.ru/index.en.html/
5. Ink Jet Printer
1. Global Pouch Forum
2. June 12-14, 2013 3. Fort Lauderdale, FL
4. http://www.globalpouchforum.com/
5. Ink Jet Printer
1. 2013 EASA
2. June 30-July 2, 2013 3. Las Vegas, NV
4. http://www.easa.com/convention
5. Inverter, Motor, Pump
1. Automation
2. March 19-22, 2013 3. Warszawa, Poland
4. http://automaticon.pl/english/
5. Inverter
1. Propak Vietnam 2013
2. March 20-22, 2013 3. HCMC, Vietnam
4. http://www.propakvietnam.com
5. Ink Jet Printer
1. Gulf Print & Pack 2013
2. April 8-11, 2013 3. Dubai, UAE
4. http://www.gulfprintpack.com/
5. Ink Jet Printer
1. Horeca 2013
2. April 9-12, 2013 3. Beirut, Lebanon
4. http://www.horecashow.com/en/event/Horeca-2013
5. Ink Jet Printer
1. Metaltech 2013
2. May 21-25, 2013 3. Kuala Lumpur, Malaysia
4. http://tradelink.com.my/metaltech/
5. Air Compressor, Inverters, PLC, Switches & Contactors,
Induction Motor, Chain & Rope Hoist
1. Surabaya Allpack
2. June 5-8, 2013 3. Surabaya, Indonesia
4. http://eastpackindonesia.com/
5. Ink Jet Printer
1. Propak Asia
2. June 12-15, 2013 3. Bangkok, Thailand
4. http://www.propakasia.com/
5. Ink Jet Printer
1. 24th Malaysia International Packaging & Labeling
2. July 4-7, 2013 3. Kuala Lumpur, Malaysia
4. http://malaysiapack.com.my/
5. Ink Jet Printer
[ China Mainland ]
1. 2013 SINO-PACK
2. March 4-6, 2013 3. Guangzhou, China
4.http://www.chinaexhibition.com/Official_Website/1-SinoPack_2013_-_20th_China_International_Exhibition_on_
Packaging_Machinery_and_Materials-Guangzhou-aHR0cDovL
3d3dy5jaGluYXNpbm9wYWNrLmNvbS9HUEFDMTMvTWFpbi9
sYW5nLWVuZy9JbmZvcm1hdGlvbi5hc3B4.html
5. Ink Jet Printer
1. ProPak China 2013
2. July 17-19, 2013/01/18 3. Shanghai, China
4.http://www.chinaexhibition.com/Official_Site/11-1700-ProPak_
China_2013_-_19th_International_Processing,_Packaging_
and_End-line_Printing_Exhibition.html
5. Ink Jet Printer
[ Taiwan Region]
1. TAPEI PACK
2. June 26-29, 2013 3. Taipei World Trade Center
4. http://www.taipeipack.com.tw/zh_TW/index.html
5. Ink Jet Printer
1. Taipei Int'l Industrial Automation Exhibition
2. August 28-31, 2013 3. Taipei World Trade Center
4. http://www.chanchao.com.tw/automation/
5. Vortex Blowers, Motor
1. Empack Brussels
2. April 2, 2013 3. Brussels, Belgium
4. http://easyfairs.com/.../empack-brussels2013.../e.../
5. Ink Jet Printer
1. Prodmash. Holod. Upak
2. April 2-5, 2013 3. Mink, Belarus
4. http://minskexpo.com/e_calendar2013_33/
5. Ink Jet Printer
1. Prod Tech/ Food Pack
2. April 10-12, 2013 3. St. Petersburg, Russia
4. http://old.restec.ru/exhibitions/.../interfood/index.en.ht... /
5. Ink Jet Printer
1. Pack Fair
2. April 10-12, 2013 3. Kiew, Ukraine
4. http://packexpo.kiev.ua/index.php?lang=en /
5. Ink Jet Printer
1. Forma Tool
2. April 16-19, 2013 3. Celje, Slovenia
4. http://messeninfo.de/Forma-Tool-M3377/Celje.html/
5. Ink Jet Printer
1. Food Industry
2. April 18-20, 2013 3. Krasnodar, Russia
4. http://gima.de/de/Messen.html?event=2120/
5. Ink Jet Printer
1. IFFA
2. May 4-9, 2013 3. Frankfurt, Germany
4. http://iffa.messefrankfurt.com/frankfurt/de/besucher/willkommen.html/
5. Ink Jet Printer
1. MSV
2. May 21-25, 2013 3. Nitra, Czech
4. http://bvv.cz › Messe Brünn › MSV
5. Ink Jet Printer
1. Metalloobrabotka
2. May 27-31, 2013 3. Moscow, Russia
4. http://.metobr-expo.ru/en/
5. Ink Jet Printer
1. Total Processing & Packaging
2. June 4-5, 2013 3. Birmingham, UK
4. http://totalexhibition.com/
5. Ink Jet Printer
1. Ros Upack
2. June 18-21, 2013 3. Moscow, Russia
4. http://rosupack.com/
5. Ink Jet Printer
1. JECA FAIR 2013
2. May 29- 31, 2013　3. Tokyo Big Sight, Japan
4. http://jecafair.jp/index_e.html
5. Transformers, Switches & Breakers, Surveillance devices, etc.
1. FOOMA JAPAN 2013
2. Jun 11- 14, 2013　3. Tokyo Big Sight, Japan
4. http://www.foomajapan.jp/2012/english/index.html
5. Ink Jet Printer, Lazer Marker, Marking Checker
VoltAge21 (ヴォルテージ 21 ), an information bulletin
with a circulation of 30,000 in Japan, is globalized, and
the English version is now delivered to you. The
original version provided customers in Japan with
information about the environment and energy saving,
as well as our products. It has been delivered to a
number of customers and supported by them. We wish
to enlarge the boundaries of such communication to
the world. Your continued support would be highly
appreciated.
AKS Bldg., 3, Kanda Neribei-cho, Chiyoda-ku, Tokyo, 101-0022 Japan
TEL : +81(3)4345-6063
JQA-EM0449
JACO-EC97J1095
JQA-EM5428
JACO-EC97J1107
JACO-EC99J1053
JACO-EC99J2009
Hitachi Industrial Equipment Systems Co.,Ltd.
(Head Office, Sales & Survice Branches)
Narashino Division
NAKAJO Division
Air Compressor Systems Division
Ebina Division
Energy Saving Systems Division
http://www.hitachi-ies.co.jp/english
© Hitachi Industrial Equipment Systems Co.,Ltd. 2012 Printed in Japan