Instruction Sheet

2
AMT676
SECONDARY HULL ASSEMBLY
A
207
Cement secondary hull sides
(206,207) to secondary hull bottom
(208) as shown.
4
STARBOARD WARP DRIVE ENGINE ASSEMBLY
Cement bussard housing (209L, 210R) together. Cement dekoid (211)
to field generator (102). Cement inner warp drive radiator (100) and
outer warp drive radiator (101) to field generator (102) as shown.
Cement starboard warp drive engine (13R) to warp drive radiator.
Cement trailing vertical (212) to rear shroud outside (15). Cement
assembled rear shroud to assembled warp drive engine. Cement
assembled bussard housing rail to assembled warp drive engine as
shown. Cement nacelle winglet (216) to assembled warp drive engine.
210R
211
highly detailed 1/1000 scale plastic assembly model kit
208
®
102
209L
6
U.S.S. ENTERPRISE NCC-1701-B
TM
ASSEMBLY INSTRUCTIONS
GENERAL ASSEMBLY: This highly detailed
kit features precision-tooled parts for ease of
assembly, but care and patience must be exercised
to achieve optimal results. It is recommended that
the builder examine the instructions carefully and
do a dry test fit of parts before applying
cement. You will find this very helpful, as it will
allow you to gain a clear understanding of how
the parts fit together in order to best plan painting
and final assembly.
212
15
206
SUB-ASSEMBLIES: Note that this kit is
intended to be built in sub-assemblies. This
makes building the kit far more manageable. It
is very important to note that you will also find
it extremely advantageous to apply paint and
decals to sub-assemblies before
completing final assembly. Please see the
other side of this instruction sheet for details on
complex paint and decal placement.
101
B
3
6
round2models.com
Cement port hull bow (4), starboard hull bow (3) and rear hull
bow (21) together as shown. Cement assembled hull bow to
secondary hull deck (6). Cement navigational deflector antenna
(219) to deflector antenna housing (215) as shown. Cement
assembled antenna and shuttle bay interior (9) to secondary hull
sub-assembly. Cement secondary hull deck canopy (7) to
secondary hull deck (6) as shown. Cement secondary hull deck
assembly to secondary hull sub-assembly as shown.
4
13R
100
216
7
21
6
KEY TO NUMBERING SYSTEM
1 Opaque plastic part
1
Step number
100 Clear plastic part
5
219
Special thanks to Angelo Bastianelli for his contribution to
the development of this kit.
FINAL STARSHIP ASSEMBLY
STARBOARD WARP DRIVE
ENGINE ASSEMBLY
Buildup pictured by E James Small. For excellence in model
building, visit his web site at smallartworks.ca
PRIMARY HULL
ASSEMBLY
1
215
PRIMARY HULL ASSEMBLY
9
Cement center impulse engine exhausts
(103), impulse engine exhausts (104) , and
the impulse engine shroud (16) to the
primary hull upper (201) as shown.
Cement primary hull upper (201) to the
primary hull lower (2).
A
201
PORT WARP DRIVE
ENGINE ASSEMBLY
SECONDARY HULL
SUB-ASSEMBLY
217
218
103
SECONDARY HULL
ASSEMBLY
3
PORT WARP DRIVE ENGINE ASSEMBLY
10
104
210R
16
2
211
B
204
320
205
Cement secondary impulse engines (320, 320) to
secondary impulse engine nozzles (204, 205) as
shown. Cement assembled secondary impulse
engines, lower secondary impulse engine panels
(202, 203) to primary hull sub-assembly.
209L
Cement bussard housing (209L, 210R) together. Cement dekoid
(211) to field generator (102). Cement inner warp drive radiator
(100) and outer warp drive radiator (101) to field generator
(102) as shown. Cement port warp drive engine (13L) to warp
drive radiator. Cement trailing vertical (212) to rear shroud
outside (15). Cement assembled rear shroud to assembled warp
drive engine. Cement assembled bussard housing rail to
assembled warp drive engine as shown. Cement nacelle winglet
(216) to assembled warp drive engine.
102
17
6
Cement upper warp drive
pylon (217) to lower warp
drive pylon (218). Cement
pylon base (10) to assembled
warp drive pylon. Cement
starboard warp drive engine
assembly and port warp drive
engine assembly to assembled
warp drive pylon as shown.
Cement aft photon torpedo
launcher (17) to secondary
hull assembly. Cement primary
hull assembly and assembled
warp drive to secondary hull
assembly as shown.
DISPLAY BASE ASSEMBLY
212
15
ASSEMBLED STARSHIP
PRIMARY HULL
SUB-ASSEMBLY 1A
320
100
4
13L
203
202
& © 2010 CBS Studios Inc. © 2010 Paramount Pictures Corp. STAR TREK and related marks are
®trademarks
of CBS Studios Inc. All rights reserved. AMT is a registered trademark of Learning
Curve Brands, Inc. used under license to Round 2, LLC. ©2010 Learning Curve Brands, Inc. All
rights reserved. Round 2 and design are trademarks of Round 2, LLC. © 2010 Round 2, LLC,
South Bend, IN 46628 USA. Product and designed in the USA. Made in China. All rights reserved.
101
216
Insert metal rod into
dome base. The base can
be used with or without
the use of the ball joint. If
desired, insert ball joint
into socket and place on
top of metal rod. Insert
ball joint top into model.
It may be necessary to
add a drop of glue to the
ball joint to hold the
model steady.
BALL JOINT
SOCKET
BALL JOINT
METAL ROD
DOME BASE
AMT676-201
U.S.S. ENTERPRISE NCC-1701-B
TM
PAINT & DECAL
INSTRUCTIONS
A Duck Egg Blue . . . . . FS35622/ Model Master #1722
F Insignia Red . . . . . . . . FS31136/ Model Master #1136
B Dark Gull Gray . . . . . FS36231/ Model Master #1740
G Chrome Silver . . . . . . . FS17178/ Model Master #1790
C Light Gray . . . . . . . FS36495/ Model Master #1732
H Green Zinc Chromate . . . . . . . . . Model Master # 1734
1. Dip the decal in water for 10 seconds. For best results,
mix one drop of common dish washing detergent per
cup of lukewarm water.
D Medium Steel Gray . . FS35237/ Model Master #1721
I Clear Red . . . . . . . . . . . Model Master Acrylic #4630
2. Place the wet decal on paper towel and wait 30-60
seconds until the decal is movable on paper backing.
E Insignia Yellow . . . . . FS33538/ Model Master #1708
J Clear Blue . . . . . . . . . . . Model Master Acrylic #4658
3. Wet the area of the model to be applied to.
KEY TO SYMBOLS
20 Decal number
A
Paint area
Paint color
Cut decal
DECAL APPLICATION:
4. Hold the decal face up, in position on model and slide
backing away from under it.
20
H
21
4
28 x5
5. Once positioned correctly, absorb excess water with a
paper towel. Starting in the center of the decal, blot out
air bubbles toward the edges with a soft damp cloth.
16
6. Let decals dry completely before handling.
B
29 x4
15
B
2
B 13
A
A
E
C
B
1
A
D
A
H
12
B
A
A
B
B
A
B
A
15
36
D
D
37
A
35
B
B
C
15
11
14
15
F
32 x20
F
A
31 x7
D
A
42 x2
E
17
3
20
A
A
A
18
J
I
A
G
40 (39 ON OPPOSITE SIDE)
19 x4
A
23
8
A
24
27
30
28 x5
A
7
F
33
F
A
A
A
B
A
5
D
A
B
A
A
38
41
A
H
H
6
10 x5
34
22
18
J
I
A
A
(40 ON OPPOSITE SIDE) 39
19 x4
A
23
9
25
26