Assembly manual - Modele.sklep.pl
Transcription
AMT752 CADET SERIES U.S.S. ENTERPRISE™ 3 SHIP SET ® CADET SERIES U.S.S. ENTERPRISE™ NCC-1701-C KLINGON™ BIRD-OF-PREY • FERENGI™ MARAUDER ASSEMBLY INSTRUCTIONS CADET SERIES U.S.S. ENTERPRISE™ NCC-1701-D GENERAL ASSEMBLY: This highly detailed kit features precision-tooled parts for ease of assembly, but care and patience must be exercised to achieve optimal results. It is recommended that the builder examine the instructions carefully and do a dry test fit of parts before applying cement. You will find this very helpful, as it will allow you to gain a clear understanding of how the parts fit together in order to best plan painting and final assembly. SUB-ASSEMBLIES: Note that this kit is intended to be built in sub-assemblies. This makes building the kit far more manageable. It is very important to note that you will also find it extremely advantageous to apply paint and decals to sub-assemblies before completing final assembly. Please see the other side of this instruction sheet for details on complex paint and decal placement. CADET SERIES U.S.S. ENTERPRISE™ NCC-1701-E DECALS & PAINT: This kit includes extensive water slide decals. The decals do not require setting solution but they are compatible with it. Paint is not required to produce satisfactory results. However, some modelers prefer to add additional painted detail to their kits. See the diagrams on this sheet for instructions regarding decal placement and optional paint specs. For best results apply dull coat for final finish. For more model building tips and techniques, visit the Workbench section of our website at round2models.com/workbench ROMULAN™ WARBIRD ® Models not shown to scale FIND THESE EXCITING STAR TREK MODEL KITS AND MORE AT round2models.com ® & © 2012 CBS Studios Inc. STAR TREK and related marks are trademarks of CBS Studios Inc. All rights reserved. AMT is a registered trademark of Round 2, LLC. ©2012 Round 2, LLC, South Bend, IN 46628 USA. Product and packaging designed in the USA. Made in China. All rights reserved. Special thanks to E. James Small for developing the window decals included in this kit. For excellence in model building, visit his web site at smallartworks.ca KEY TO NUMBERING 1 Opaque plastic part 100 Clear plastic part 1 Step number 1 Completed Assembly round2models.com FERENGI™ MARAUDER 1 33 KLINGON™ BIRD OF PREY 1 301 16 15 13 1 14 18 12 300 10 2 11 303 302 Cement upper hull (1) to lower hull (2). Cement upper weapon deck (3) to upper hull. Cement left warp drive engine (302) and right warp drive engine (303) to underside of lower hull. Cement left hydrogen collector (300) and right hydrogen collector (301) to top of upper hull. 2 Cement left hinge cover (14) and left weapon pod (17) to left wing (12). Cement right hinge cover (15) and right weapon pod (18) to right wing (13). Cement upper fuselage half (10) to lower fuselage half (11) trapping left and right wings between halves making sure to keep the hinge area free of cement. Cement upper hinge shroud (16) to fuselage. 2 DECAL & PAINT INSTRUCTIONS Base - Burnt Sienna MM #4607 Weathering - Burnt Umber 18 MM #4605 9 7 DECAL & PAINT INSTRUCTIONS 18 13 D 15 5 19 4 B (various panels) 17 8 3 11 2 19 16 6 18 A B C D E 14 12 Pale Green . . . . . . . . . . . . . . . . . . . . . . . . . . FS342267/ Model Master #1716 Light Ghost Gray . . . . . . . . . . . . . . . . . . . . . . FS36375/ Model Master #1728 Insignia Red . . . . . . . . . . . . . . . . . . . . . . . . . FS31136/ Model Master #1705 10 18 E (indentions) (various panels) C Base - Green Zinc Chromate MM #1734 Weathering Dark Green MM #4726 D D C 22 Gun Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Model Master #1795 Flat White . . . . . . . . . . . . . . . . . . . . . . . . . . FS37875/ Model Master # 1768 21 D C 1 C 23 A Detail colors 17 HINT: For more details on paint and decal placement, refer to box art. 20
Similar documents
Assembly manual - Modele.sklep.pl
and a second set of smaller decals (primarily marking decals) are placed on top. These decals are compatable with setting solution which can be applied to conform around surface details. Paint is n...
More informationPOL895 C-57D Instrucitons
top of part #2 while trapping the hinge pins of the ramps. Be sure not to get cement on the hinge pins. It is important to glue the areas closest to the center of the saucer thoroughly and allow th...
More informationPOL820 Instr Sht Front1
glue their model, it is recommended that the instructions be examined carefully before applying cement. You will find this very helpful, as it will allow you to gain a clear understanding of how th...
More informationCement Markets in the Top 5 American Countries to 2019
The industry report package Cement Markets in the Top 5 American Countries to 2019 Market Size,Development,and Forecasts offers the most up-to-date market data on the actual market.
More informationInstruction Sheet
(211) to field generator (102). Cement inner warp drive radiator (100) and outer warp drive radiator (101) to field generator (102) as shown. Cement port warp drive engine (13L) to warp drive radia...
More information