Assembly manual
Transcription
Assembly manual
2 AMT667 5 PYLONS LOWER HULL STARBOARD PORT 13 15 16 14 18 17 PORT NACELLE ASSEMBLY 2 highly detailed 1:537 scale plastic assembly model kit 24 ® STARBOARD NACELLE ASSEMBLY 2 PORT NACELLE ASSEMBLY 1 23 U.S.S. RELIANT NCC-1864 TM ASSEMBLY INSTRUCTIONS GENERAL ASSEMBLY: This highly detailed kit features precision-tooled parts for ease of assembly, but care and patience must be exercised to achieve optimal results. It is recommended that the builder examine the instructions carefully and do a dry test fit of parts before applying cement. You will find this very helpful, as it will allow you to gain a clear understanding of how the parts fit together in order to best plan painting and final assembly. SUB-ASSEMBLIES: Note that this kit is intended to be built in sub-assemblies. This makes building the kit far more manageable. It is very important to note that you will also find it extremely advantageous to apply paint and decals to sub-assemblies before completing final assembly. Please see the other side of this instruction sheet for details on paint and marking decal placement. A full set of aztec paneling decals are available separately. Check with your regular source for hobby supplies or check in at round2models.com for availability. STARBOARD NACELLE ASSEMBLY 1 Cement the upper inner pylon (16) and lower inner pylon (18) to the outer pylon (14). Cement the assembled pylon to the assembled starboard engine nacelle. Cement the upper inner pylon (15) and lower inner pylon (27) to the outer pylon (13). Cement the assembled pylon to the assembled port engine nacelle. 3 HULL ASSEMBLY 4 104 Cement the assembled pylons to the assembled hull as shown. Cement the pylon cover plates (24 & 23) to the assembled pylon assemblies. Then cement the lower sensor dome (19) to the clear sensor dome insert (104). Cement the sensor dome to the assembled hull. 19 FORWARD HULL KEY TO NUMBERING SYSTEM 1 1 Opaque plastic part (1-27) Step number (1-7) 100 Clear plastic part (101-109, 201 & 202) 1 27 25 round2models.com 6 SENSOR ARRAY ENGINE NACELLES PORT 1 20 26 100 5 101 6 2 3 11 22 4 Cement the warp drive intercooler (22) to the warp drive engine half (20) as shown. Then cement the warp drive engine halves (20 & 11) together. Cement photon torpedo launchers (5 &6) between upper and lower sensor array (1 & 4). Cement rear sensor array (26) to array assembly. Cement upper sensor array braces (2 & 3) to lower brace assembly. Cement the lower impulse drive core (101) to the lower hull as shown. Then cement the upper impulse drive core (100) to the upper hull (14). Cement the upper hull to the lower hull. Then cement the docking port (27) to the bridge dome (25). Then cement the assembled bridge dome to the assembled hull. STARBOARD Cement the warp drive intercooler (22) to the warp drive engine half (12) as shown. Then cement the warp drive engine halves (12 & 21) together. 4 AFT HULL FORWARD HULL ASSEMBLY 3 12 201 103 105 200 7 FINAL ASSEMBLY Cement the assembled sensor array to the assembled hull. Cement phasers emitters (7) to the array brace / pylon junctions. 4 7 7 SENSOR ARRAY ASSEMBLY 6 7 10 102 21 105 22 & © 2010 CBS Studios Inc. © 2010 Paramount Pictures Corp. STAR TREK and related marks are ®trademarks of CBS Studios Inc. All rights reserved. AMT is a registered trademark of Learning Curve Brands, Inc. used under license to Round 2, LLC. ©2010 Learning Curve Brands, Inc. All rights reserved. Round 2 and design are trademarks of Round 2, LLC. © 2010 Round 2, LLC, South Bend, IN 46628 USA. Product and designed in the USA. Made in China. All rights reserved. Cement the docking lights (105) into the aft hull bulkhead (10) as shown. Then cement the shuttle bays (102 & 103) to the aft hull bulkhead (10). Cement the impulse engine ports (201 & 200) to the aft bulkhead (10). HULL ASSEMBLY 4 A667-200 4 PAINT & DECAL INSTRUCTIONS 5 K 3 20 A Decal number 10 1 Cut decal Paint area Paint color 2 A B C D E F F K KEY TO SYMBOLS Duck Egg Blue . . . . . Model Master #1722 Light Ghost Gray . . . Model Master #1728 Flat Black . . . . . . . . . Model Master #1749 British Crimson . . . .Model Master# 2009 Insignia White . . . . . Model Master #1745 Intermediate Blue . . . Model Master #1720 H Aluminum . . . . . . . . . . . . . Testors #1181 Flat Yellow . . . . . . . . . . . . . .Testors #1169 Gloss Black . . . . . . . Model Master #1747 Copper . . . . . . . . . . . . . . . . Testors #1251 Green . . . . . . . . . . . Model Master #1734 Insignia Red . . . . . . Model Master #1705 G H I J K L A K A H C H 8 F A A E A 9 H D 26 A 27 A A F D C H F 3 6 L C F 22 14 A 23 F A A L A 20 24 H B B H 15 F 13 B 12 F F E F A G H H F H F K 23 22 F 21 25 A F C A 19 F (apply to both sides) C A 14 17 (16 on opposite side) 18 7 E 11 A C E L 4 D G L F 1 25 A 10 H A
Similar documents
Instruction Sheet
bow (21) together as shown. Cement assembled hull bow to secondary hull deck (6). Cement navigational deflector antenna (219) to deflector antenna housing (215) as shown. Cement assembled antenna a...
More informationPOL895 C-57D Instrucitons
trademarks of and © Turner Entertainment Co. (s13) POLAR LIGHTS and ROUND 2 and design are trademarks of Round 2, LLC ©2013 Round 2, LLC, South Bend, IN 46628 USA. Product and packaging designed in...
More information