drilco - Richard Irvin

M&E Project Services Case Study
DRILCO
Installation of Mechanical
and Electrical Services
Richard Irvin Energy Solutions / ME-CS-09-0615 / Case Study
DRILCO
Scope: Installation of Mechanical and Electrical Services
Location: Fit-out of Office and Workshop Premises for Drilco, Badentoy Industrial Estate, Portlethen, Aberdeenshire
Duration: 4 Months, January 2015 – April 2015
Value: £400,000
A CAT 5 break tank and booster set arrangement was also installed
within the Workshop Area to provide fluid category 5 backflow
protection in accordance with Water Byelaw requirements. The
external mains cold water service was electric trace heated.
A dedicated close control air conditioning system – cooling,
heating and humidification, was provided to serve the Gauge Store
to maintain the desired environmental conditions within the area.
The air conditioning system comprises internal floor mounted close
control unit – up flow discharge, external air cooled condenser
unit, interconnecting refrigeration pipework, cable tray support
arrangement, power and control cabling.
Natural gas pipework was extended within the Workshop Area to
create a distribution header arrangement for future connection.
OVERVIEW
An Office and Workshop Development at Badentoy Industrial
Estate, Portlethen, Aberdeenshire was built by Dandara Limited,
completed January 2015, with Drilco taking possession of the
building at this time to facilitate a Fit-out Contract, primarily to the
Workshop Area but also with alterations to the Office Area. The
Fit-out was to ensure that the Development complied with Drilco’s
operational requirements.
Richard Irvin Energy Solutions were appointed by Carden Project
Management Limited to undertake the fit-out works associated with
the Mechanical and Electrical Services.
Within the Workshop Area existing services were extended
throughout the building to pre-determined locations, provided by
the Client’s representative, for connection to specialist equipment.
These Services included the provision of cooling water, compressed
air, mains cold water, boosted cold water, sub-mains electrical
distribution boards, small power and data.
Additional services i.e. heat recovery mechanical ventilation system,
intruder alarm, door access, CCTV together with modifications to
the existing services - LPHW heating, small power, fire alarm system
were undertaken within the office area to accommodate the
Clients finalised internal partitioning layout.
KEY FEATURES
Socket fusion polypropylene pipework utilised for the cooling
water system
u
u
LED high bay luminaires within the Workshop Area
u
External high definition colour / mini dome IP cameras located
around the Workshop Area, on the Office Building and on
lighting columns within the Storage Yard
For more information, please contact: Richard Irvin Energy Solutions
Irvin House, Hareness Road, Altens Industrial Estate, Aberdeen AB12 3LE
tel. +44 (0) 1224 367000
www.richard-irvin.com