14 Sparkly Craft Projects eBook from Krylon

Transcription

Find more ways to sparkle at www.KrylonGlitterBlast.com.
2
3
How to Create
14 Sparkly Craft Projects
using Krylon® Glitter Blast™
Copyright 2011 by Prime Publishing LLC
All rights reserved. No part of this book may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying, recording, or by any information storage or retrieval
system, without written permission from the publisher, except in the case of brief quotations embodied
in critical articles and reviews.
Trademarks are property of their respective holders. When used, trademarks are for the benefit of the
trademark owner only.
Published by Prime Publishing LLC, 3400 Dundee Road, Northbrook, IL 60062 – www.primecp.com
Free Craft Projects
4
Letter from the Editors
Dear Reader:
Until now, glitter sprays have delivered a few flecks of glitter to project surfaces - a nice effect, but not
incredibly dazzling. New Krylon® Glitter Blast™ Glitter Paint changes all of that. You’ve never seen
anything like it. More glitter, more sparkle, more intensity, more depth than ever before. So you can put
the glitz and glam on virtually any project with any surface – wood, plastic, metal, ceramic, craft foam,
and more.
This book includes basic instructions for projects ranging from simple, inexpensive ideas to more
complex décor and craft ideas - all with complete materials lists and instructions to make it easy for you
to get incredible results.
For more Krylon® Glitter Blast™ information, inspiration and ideas, visit www.Krylon.com or
www.KrylonGlitterBlast.com.
We would like to thank www.FaveCrafts.com for helping create this eBook.
Sincerely,
Krylon
www.Krylon.com
5
14 Sparkly Craft Projects
Table of Contents
Holiday Projects .............................. 7
Fancy Spider ................................................... 7
Prized Pumpkins ............................................. 8
Glittering Holiday Pinecones .......................... 9
Holiday Ornament Tree ............................... 10
Dazzling Easter Eggs ..................................... 11
For The Home ............................... 12
Peace Lamp .................................................. 12
Bold and Brilliant Mailbox ............................ 13
Sparkling Jeweled Votives ............................ 14
Sparkling Jeweled Photo Frames ................. 15
Sparkling Polka-Dot Halloween Topiary....... 16
Fun Stuff ........................................ 18
Radical Stripes Skateboard .......................... 18
Technology Trio............................................ 19
Here’s to a Fabulous Helmet........................ 20
Glimmering Guitar ....................................... 21
6
Holiday Projects
Fancy Spider
By Melony Bradley
With Krylon® Glitter Blast™ Glitter Paint and a
craft foam ball, spider crafts don’t have to be
scary. It’s easy to spray the craft foam ball and
egg with this new paint. Whimsical
embellishments take the scary out of this spider
– fancy spider crafts are fun for all.









1” round craft mirror
Silk flower
12”-length of 7/8" pink satin ribbon
Aleenes® Original Tacky Glue
Scissors
Toothpick
Skewer
Scrap of craft foam
Straight pins
INSTRUCTIONS:
1. Insert toothpick into one end of egg. Remove
and place glue on end of toothpick. Insert the
glue side of the toothpick back into the hole
created in the egg. Using the opposite side of
the toothpick, repeat the same steps for the
ball, to join shapes together to form spider
head and body. Place skewer in bottom end
of egg.
2. Spray shapes with black Krylon® Short Cuts®
Paint spray paint, using several light coats for
complete coverage. When paint is dry, spray
shapes with several light coats of Glitter Blast
Starry Night until desired glittery look is
achieved. Place end of skewer into scrap of
foam to dry.
3. Cut chenille stems to 8” pieces. Insert stem
into side of body for leg. Remove stem and
place glue on end of stem, reinsert. Repeat
steps for remaining legs.
MATERIALS:
 Craft foam: 2” ball, 3” egg
 1 can Krylon® Short Cuts® Paint, Black
 1 can Krylon® Glitter Blast™ Glitter Paint,
Starry Night
 8 black chenille stems
 11–10mm round acrylic flat backed stones
 2–6mm pearl beads
 Glittered cardboard stickers: silver swirl by
Recollections®
4. Place glue on one end of straight pin. Thread
through bead and insert into head for eye.
Repeat steps for second eye. Place sticker on
head for crown. Glue one flat backed stone to
end of each leg with tacky glue. Glue
remaining stones for buttons on front of egg
shape.
5. Tie ribbon around “neck” in a bow. Glue craft
mirror and silk flower to bow as shown.
7
Prized Pumpkins
By the Krylon® Design Team
Pumpkins and gourds add elegance to your
table when they glisten like this. Beautiful
metallic paints add a grown-up touch to the
holiday. Simply spray paint a pumpkin or gourd;
for these prized pumpkins, designs could be
added as well if desired. I’m sure these will
inspire you to have more ideas for painted
pumpkins.
MATERIALS:
 Several small pumpkins or gourds
 1 can Krylon® Indoor/Outdoor Primer
 2 cans Krylon® Glitter Blast™ Glitter Paint in
desired colors
 Masking tape
 Drop cloth
INSTRUCTIONS:
1. Clean pumpkins to be painted, making sure
surfaces are free of dirt and dust. Mask off
stems.
2. Apply several light coats of Krylon®
Indoor/Outdoor Primer. Move from side to
side in a sweeping motion, beginning off the
surface and ending off the other side. Allow
to dry.
3. Spray with Krylon® Glitter Blast™ Glitter Paint.
Apply multiple thin coats to avoid runs and
drips. Wait approximately 1 to 2 minutes
between coats, shaking can before each coat.
4. Remove masking tape from stems when
Glitter Blast is dry to handle, usually in 24
hours.
Tip: Slightly elevate pumpkins approximately 4”
off of work surface to allow access to the
rounded bottoms of the pumpkin while
spraying.
8
Glittering Holiday Pinecones
You’ll love these painted pinecones; craft your
way through the winter this year. We’ve used
gold and silver Glitter Blast™ paint to adorn
these glistening pinecones, but you can choose
whatever color you desire. Whether you choose
to use the pinecones as decorations on their own
or incorporate them into sparkly holiday crafts,
these glittering holiday pinecones are simply
stunning.
MATERIALS:
 Pinecones (as many as you would like!)
Golden Glow
 1 can Krylon® Glitter Blast™ Glitter Paint, Silver
Flash
 Pushpins
 Fishing line
 Masking tape
 Drop cloth
INSTRUCTIONS:
1. Make certain that the pinecones to be painted
are clean from dirt and dust.
2. Spray with Krylon Glitter Blast. Apply multiple
thin coats to avoid runs and drips. Wait
approximately 1 to 2 minutes between coats,
shaking can before each coat. Let dry
Tip: To make all sides of the pinecones easily
accessible and even easier to spray, create a
makeshift closeline and hang pinecones from
string or fishing line.
9
Holiday Ornament Tree
This holiday ornament tree is great for a
contemporary setting or small spaces. Though
you can paint any size of ornament for Christmas
trees, ornaments for mini Christmas trees are
quick to make. We even tell you how to revamp
the metal ornament tree – this rubbed bronze
version is modern and shows off the sparkly
decorations.
MATERIALS:
 Metal ornament tree
 10 - 12 small ornaments
 1 can Krylon® Brushed Metallic Paint, Oil
Rubbed Bronze
Sparkling Water and Silver Flash
 Masking tape
 String or fishing line
 Drop cloth
INSTRUCTIONS
1. Clean all objects to be painted, making sure
the surfaces are free of dirt and dust.
2. Mask off ornament hangers.
3. Prime the Ornament Tree. Apply several light
coats of Krylon® Indoor/Outdoor Primer. Spray
from side to side in a sweeping motion
beginning off the surface and ending off of the
other side.
4. Paint ornament tree with Krylon® Brushed
Metallic Oil Rubbed Bronze. Apply multiple
thin coats to avoid runs and drips. Wait
approximately 1 to 2 minutes between coats.
Let dry
5. Spray ornaments with Krylon® Glitter Blast™.
(We sprayed half with Glitter Blast™ Silver
Flash and half with Glitter Blast™ Sparkling
Waters.) Apply multiple thin coats. Wait
shaking can before each coat. Let dry.
6. Remove masking tape or replace ornament
hangers after Glitter Blast™ is dry to handle,
approximately 24 hours.
Tip: Make it easier to spray all sides of the
ornaments by creating a makeshift closeline and
hang ornaments from string or fishing line.
10
Dazzling Easter Eggs
Simple paper mache eggs are transformed into
dazzling Easter eggs with various colors of
glittering paint. Spray paint eggs for your Easter
table or for a grown-up Easter basket. These
beautifully shaded eggs welcome spring!
MATERIALS:
 Paper eggs from craft store
 1 can Krylon® Glitter Blast™ Glitter Paint, Posh
Pink
Sparkling Water
Twilight Sky
 1 can Krylon® Glitter Blast™ Glitter Paint, Citrus
Dream
 Push pins
 Fishing line
 Masking tape
 Drop cloth
INSTRUCTIONS:
1. Clean all objects to be painted, making sure all
surfaces are free of dirt and dust.
2. Spray eggs with Krylon® Glitter Blast™. Apply
multiple thin coats. Wait approximately 1 to 2
minutes between coats, shaking can before
each coat. Let dry.
Tip: Make it easier to spray all sides of the eggs
by hanging them from a makeshift closeline.
Take a pushpin and insert it into one end of an
egg. Attach fishing line to the pushpin and hang
from the clothes line.
11
For The Home
Peace Lamp
By Roxi Phillips
Any old lamp can be updated with
indoor/outdoor paint and glittery paint. Add to
the sparkle and shine by coating the peace sign
and flower power cardstock shapes with glitter
paint. A glittering peace lamp will be a welcome
addition to a kid’s room.
MATERIALS:
 Lamp base and shade
 Cardstock shapes (i.e. peace signs and
flowers)*
Starry Night
Pink
Twilight Sky
 1 can Krylon® Indoor/Outdoor Paint, Black
 1 can Krylon® Easy Tack
 Masking tape and paper
 Craft glue or glue dots
*TIP: Cardstock shapes may be purchased or cut
with die-cut machine or craft punches.
INSTRUCTIONS
1. Remove shade from lamp. Clean all objects to
be painted, making sure the surfaces are free
of dirt and dust. Mask off all electrical parts.
2. Spray lamp base with Krylon® Indoor/Outdoor
black paint. Apply several light coats to avoid
runs and drips. Spray from side to side in a
sweeping motion beginning off the surface and
ending off of the other side. Let dry.
3. Spray lamp base with Krylon® Glitter Blast™
Glitter Paint Starry Night. Repeat coats as
necessary for complete coverage. Wait
shaking can before each coat. Let dry 24 hours
before handling.
4. Spray backside of cardstock shapes with
Krylon® Easy Tack; adhere to masking paper.
Spray shapes with Krylon® Glitter Blast™
Glitter Paint in desired colors. Let dry.
5. Remove glittered pieces from masking paper
and apply to lampshade using glue dots or
craft glue.
6. Reassemble lamp.
12
Bold and Brilliant Mailbox
While you can paint your mailbox any glittering
color you want, but this cherry bomb color
makes a bold and brilliant statement. If you’ve
wondered how to paint a metal mailbox, these
step-by-step instructions will help you succeed.
Everyone in the neighborhood will come to you
for tips on how to paint a mailbox.
INSTRUCTIONS:
1. Cover your work area with newspaper or a
drop cloth. Make sure you are in a wellventilated area.
2. Remove the flag from the mailbox.
3. If you are painting an old mailbox that is rusty
or worn, sand the areas until smooth and use a
primer. The surface should be clean, dry and
dull. If mailbox is in good condition, skip to
step 6.
4. Prop the mailbox open side down (with door
hanging open) on an object such as a 2x4,
foam cube or tall container so that all exterior
surfaces are free of obstructions.
5. Prime the mailbox with Krylon®
Indoor/Outdoor Primer. Apply several light
coats of primer. Spray from side to side in a
sweeping motion, beginning off the surface
and ending off of the other side. Allow to dry.
(Note: If you are using a plastic mailbox, you do
not need to use a primer before applying
Krylon® Glitter Blast™.)
6. Spray multiple light coats of Krylon® Glitter
Blast™ Glitter Paint until you reach the level of
coverage you want. Wait 1 to 2 minutes
Allow to dry.
MATERIALS:
 Standard mailbox
 Krylon® Indoor/Outdoor Primer
 Krylon® Glitter Blast™ Glitter Paint, Cherry
Bomb (or any color you desire)
 Krylon® Glitter Blast™ Clear Sealer
 Screwdriver
 Sandpaper
 Newspaper or drop cloth
7. Apply 2-4 coats of Krylon® Glitter Blast™ Clear
Sealer. Allow to dry.
8. Spray the flag if you wish, repeating the steps
above.
9. Reattach flag.
13
Sparkling Jeweled Votives
Craft candle cups to match your décor using
glittering paint. The easy-to-add accents make
these sparkling jeweled votives one of a kind.
These are an easy project; you’ll love to make
them as gifts after you make some for your own
home.
MATERIALS:
 Glass votives
Diamond Dust
Sparkling Waters
 Adhesive-backed gems or glue-on gems and
appropriate glue (optional)
 Masking tape
 Paper towels
 Drop cloth
INSTRUCTIONS:
1. Clean votive holders, making sure surfaces are
clean of dirt and dust.
2. Place votive upside down on painting surface
to prevent spray from going inside.
3. Spray with Krylon® Glitter Blast™. Apply
multiple thin coats until desired finish is
achieved. Wait approximately 1 to 2 minutes
Let dry.
4. If desired, arrange and attach glue-on or
adhesive-backed gems.
14
Sparkling Jeweled Photo Frames
There are so many ways to make sparkling
jeweled photo frames. Whether you paint the
whole frame or tape off sections and paint
accent areas, you can make some great frames
that will make a statement. Get your glisten on
and start painting those plain frames.
MATERIALS:
 Assorted picture frames
Pink
Twilight Sky
 Masking tape
 Drop cloth
 Adhesive-backed jewels or embellishments
INSTRUCTIONS:
1. Disassemble frames, removing glass insert and
back.
2. Clean surfaces to be painted, making sure they
are free of dirt and dust.
3. Mask off any areas you do not want to spray.
multiple thin coats until desired glitter finish is
achieved. Wait approximately 1 to 2 minutes
Spray in a sweeping motion beginning off the
surface and continuing each pass off the other
side. Let dry.
5. If desired, apply adhesive-backed jewels or
embellishments for extra pizazz.
Tip: Use small pieces of wood for support to raise
the frame above the surface so that the edges
may be thoroughly painted and frames will not
stick to the flat surface.
15
By Sharon Currier




Quick and easy decorations for Halloween are a
great solution to your Halloween decoration
dilemma. The sparkling polka-dot Halloween
topiary sparkes with Glitter Blast™ and a few
embellishments. This topiary could be adapted
to sparkle any time of the year, for any holiday,
or even for a wedding or baby shower. So get
your craft foam at the ready and get to work!
INSTRUCTIONS:
1. Before you start, carefully read label on the
can of Glitter Blast™. Cover work area with
newspapers. Spray cone with Orange Burst
Glitter Blast™. Let dry. (Glitter Blast™
darkens as it dries, so be careful to not
overspray. If you overspray, the finish can
run.)
Sparkling Polka-Dot Halloween
Topiary
Toothpick
Scissors
Rubber gloves
Sewing machine OR needle and thread
2. Insert toothpick into 2” ball. Spray with
Orange Burst Glitter Blast™. Insert toothpick
into scrap of foam and let dry.
3. Make your polka-dot masks. If using contact
paper, cut out 2” circles. Remove backing
from circle stickers or contact paper circles
and arrange randomly on painted cone. Pay
special attention to the edges, pressing them
down firmly so the paint doesn’t bleed under
the masks.
MATERIALS:
 Craft foam: 12” cone (or other sizes of your
choice); 2” ball; scrap of foam
 Krylon® Gitter Blast™ Glitter Paint: Starry
Night, Orange Burst
 Circle stickers, 2” OR contact paper
 Crepe paper roll, black
 Ribbon, 3/8” wide
 Newspaper
 Low temp glue gun and glue sticks
16
4. Carefully peel away your stickers or masks to
reveal polka dots.
5. Spray entire cone with Starry Night Glitter
Blast™. Let dry. Carefully remove stickers.
6. Set sewing machine on longest basting
stitch. Stich down center of crepe paper;
crepe paper will ruffle as you stitch. Glue
ruffled strip around top and bottom of cone.
Or, using a needle and thread, hand stitch
down center of crepe paper strip, gently
pulling to create a ruffle as you go.
7. Glue ribbon around middle of crepe paper
ruffle.
8. Glue orange glittered ball to top of cone.
17
Fun Stuff
Radical Stripes Skateboard
Make a bold statement with a radical stripes
skateboard. You can customize your own design
to transform that old board by using masking
tape to block off areas in certain colors.
MATERIALS:
 Skateboard
Orange Burst
 1 can Krylon® Glitter Blast™ Glitter Paint, Citrus
Dream
 1 can Krylon® Glitter Blast™ Clear Sealer
 Masking tape
 Drop cloth
INSTRUCTIONS:
1. Clean skateboard, making sure surface is free
of any grease, dirt or dust. Remove wheels and
mask any areas not to be painted.
2. Prime the entire skateboard. Apply several
light coats of Krylon® Indoor/Outdoor Primer.
Spray from side to side in a sweeping motion
beginning off the surface and ending off of the
other side. Let dry.
3. Spray entire board with Krylon® Glitter Blast™
Glitter Paint. Apply thin coats until desired
finish is achieved, usually between 2 and 4
coats. Wait approximately 1 to 2 minutes
Let dry.
4. Spray board with several coats of Krylon®
Glitter Blast™ Clear Sealer. Allow to dry.
5. Use masking tape to create a cool design, then
apply a second color of Glitter Blast™ and
allow to dry. Remove masking tape when dry.
6. Repeat step 4. (If additional colors of Glitter
Blast™ are desired, repeat step 5.)
7. Remount wheels.
18
Technology Trio
Can you believe you can even use Krylon® Glitter
Blast™ Glitter Paint on the covers for your
electronics? Spray painting crafts are perfect for
the non-crafter techie in your life because they
are easy and promise success! Spice up your
technology trio by adding glitter paint in cheery
colors.
MATERIALS:
 Covers for Nintendo, iPhone, and a computer
mouse
 1 can Krylon® Glitter Blast™ Glitter Paint in
color of your choice
 1 can Krylon® Glitter Blast™ Clear Sealer
 Masking tape
 Drop cloth
INSTRUCTIONS:
1. Clean all surfaces to be painted, making sure
they are free of grease, dirt and dust.
2. Tape off any areas not to be painted (i.e.,
moveable parts on the mouse).
Apply multiple thin coats until desired glitter
finish is achieved. Wait approximately 1 to 2
minutes between coats, shaking can before
each coat. Let dry.
Tip: Raising the item off of your work surface will
make it easier to cover the edges and will
prevent it from sticking to the surface.
19
Here’s to a Fabulous Helmet
Cheers! Here’s to a fabulous helmet that’s also
fashion-forward. Whether you paint the entire
helmet with Krylon® Glitter Blast™ Glitter Paint
or whether you tape off a pattern to add even
more style, a personalized helmet is a fun and
functional accessory for your outdoor sports.
MATERIALS:
 Bike helmet
 Krylon® Glitter Blast™ in your choice of color
(we used Sparkling Waters)
 Krylon® Glitter Blast™ Clear Sealer (optional)
 Painter's tape
INSTRUCTIONS:
1. Clean helmet, making sure any areas to be
painted are clean and free of grease, dirt and
dust.
2. Mask off any areas of the helmet that you do
not want to spray.
multiple light coats until you have achieved the
glittery look you want. Wait approximately 1 to
2 minutes between coats, shaking can before
each coat. Let dry.
4. While applying the Krylon® Glitter Blast™ Clear
Sealer is not required, a few coats of clear will
make the surface smoother, allowing you to
wipe it clean after using it. Let dry.
5. Remove tape.
20
Glimmering Guitar
Gaming guitar, glimmering guitar … glitter up
your guitar with your favorite color. The
spotlights will make your guitar shine, even if it’s
just the guitar you use for gaming. While you
may not want to glitter your Gibson Les Paul,
you’ll love to have a glittering guitar of your own.
MATERIALS:
 Guitar (we used a guitar for gaming, but this
works on musical instruments equally well)
 Glitter Blast™ in your choice of color (we used
Citrus Dream)
 Krylon® Glitter Blast™ Clear Sealer (optional)
 Painter's tape
 Newspaper
INSTRUCTIONS:
1. Wipe down the surface of the guitar body that
you will be painting, making sure it is clean and
dry.
2. If you can remove the neck of the guitar, do so.
Otherwise, wrap the neck in newspaper and
tape it in place. Tape off all surfaces on the
body of the guitar that you do not want to coat
with glitter.
Apply multiple light coats until you have
achieved the glitter look you want. Wait
shaking can before each coat. Let dry.
4. While applying the Krylon® Glitter Blast™ Clear
Sealer is not required, a few coats of Clear will
make the surface smoother, ensuring that it
doesn't catch on your clothes and making it
easier to clean. Let dry.
5. Remove the tape and newspaper.
21
How to Paint with Spray Paint:
14 Sparkly Craft Projects using Krylon® Glitter Blast™ Glitter Paint
Until now, glitter sprays have delivered a few flecks of glitter to project surfaces - a nice effect, but not
incredibly dazzling. New Krylon® Glitter Blast™ Glitter Paint changes all of that. You’ve never seen
anything like it. More glitter, more sparkle, more intensity, more depth than ever before. So you can put
the glitz and glam on virtually any project with any surface – wood, plastic, metal, ceramic, craft foam,
and more.
Included in this eBook:
Holiday Projects



Shiny Painted Pumpkins, p. 7 (left)
Little Ornament Tree, p. 9
Fancy Painted Eggs, p. 10 (right)
Projects for the Home



Bold and Brilliant Paint on Mailbox, p. 12
Painted Personalized DIY Picture Frames, p. 14
(below, left)
Sparkling Polka-Dot Halloween Topiary, p. 16
Fun Stuff


Creative Take on Technology, p. 17 (below, right)
Glimmering Gaming Guitar, p. 19
22

14 Sparkly Craft Projects eBook from Krylon

Transcription

Similar documents

12/12/12: Kanye West bringing Caravaggio`s 1603 Entombment of

Sweetness 12 x 12 Layout

Glitter!Shine! Sparkle!

Portamatite esagonale decorato con pennarelli, glitter e lustrini

tapes, adhesives, fixatives 233

How to Spray Paint Vinyl Shutters | Krylon®

Plain canvas slip-ons have never looked better.

Terramundi 2016/17 Catalogue