Jet City Catalog (Fall)

Transcription

JET CITY AMPLIFICATION was founded in 2009 by three experts in the
music industry and is headquartered in Seattle.
Jet City Amplification products deliver the utmost in pure, all-tube tone,
from shimmering clean to thick ‘n raunchy, while being affordable
enough for musicians slugging out a living on the small stage.
All amplifiers offered in this series, outside the PicoValve (designed by
Andy Marshall of THD), were designed by the legendary Mike Soldano
and respect his philosophy of creating high-quality instruments that are
easy to use.
Each amplifier is meticulously hand-built and rigorously tested, ensuring
100% legit tone, and unflinching reliability.
Amplifiers 2011
Welcome to Jet City
WELCOME TO
JET CITY
www.jetcityamplification.com
3
Amplifier Heads 2011
Welcome to Jet City
Channels 1
5W/2.5W Power Selector, Preamp Gain,
Controls Bass, Middle, Treble, Bright Switch, and
Master Volume
Stock Tubes
2x 12AX7 Preamp
1x 6L6 Power
EL34, 6L6, 5881, KT88, 6550, 5881, 6V6,
Compatible
EL84 (with adaptor)…see manual for
Power Tubes
exhaustive list.
Rectifier Solid state
Cabinetry Perforated, cold-rolled steel
Chassis 16 gauge, cold-rolled steel
5W/2.5W into 4, 8 or
Output Power
16-ohm speaker outputs
Input Power
Multi-tapped power transformer at
120v/220v and standard IEC connector
Dimensions 6.5”H x 7”D x 12.5”W
Weight 21 lbs net
PicoValve
Designed by Andy Marshall and licensed by THD Electronics,
PicoValve is our compact, low-wattage tone machine. With dual
12AX7s shaping the preamp voicing, and a single 6L6 in the
power section, this caged monster is the real deal. From touchsensitive and punchy cleans, to beefy, heavy rock tones, the
PicoValve will get you the tone you want without tearing the
paint off the walls. What’s more, you can custom tailor your
Pico by swapping the power tube with nearly any octal-based
tube, and there’s no re-biasing necessary. Looking to complete
the package? The Pico mates perfectly with the JCA12XS for a
handsome and compact micro-stack.
5
Channels 1
Controls
Tubes
Preamp Gain, Bass, Middle,
Treble, Master, Presence
3x 12AX7 Preamp
2x EL84 Power
Rectifier Solid State
Cabinetry Void-free plywood
Output Power
JCA20H
Pure, simple, and full of tube tone, JCA20H delivers from a
single-channel amp with absolutely no gimmick features to
dilute the all-tube signal path. Elegance of design both inside and
out deliver unflinching reliability in an amp good-looking enough
to make a girlfriend jealous. With full EQ control and separate
Preamp and Master volumes, JCA20H can deliver spanky cleans
through crunchy overdrive.
20 watts into 16-ohm or
2x 8-ohm speaker outputs
Multi-tapped power transformer
Input Power at 100v/120v/220v/240v
and standard IEC connector
Dimensions 9”H x 9”D x 19.5”W
Weight 21.3 lbs net
Welcome to Jet City
DESIGN BY
soldano
7
Channels 2 - Crunch and Overdrive (foot-switchable)
Crunch Gain, Overdrive Gain, Bass, Middle,
Controls Treble, Crunch Master, Overdrive Master,
Presence
Effects Loop Tube-Buffered, serial
Tubes
5x 12AX7 Preamp
2x EL84 Power
Footswitch Single button - Crunch/Overdrive
(included) channel selection
JCA22H
You asked for it, and here it is! We took the legendary JCA20H
and added a second, footswitch-accessible overdrive channel,
along with a tube-buffered, serial effects loop. Poised to change
the amp world…again, the JCA22H is elegance in design both
inside and out, delivering unflinching reliability and everything
you’d want in an amp. With full EQ control and separate preamp
gain and master volumes, the JCA22H can deliver spanky cleans
all the way through saturated, Soldano high-gain overdrive.
Output Power
Dimensions 9”H x 9”D x 19.5”W
Weight 21.3 lbs net
Welcome to Jet City
Normal Gain, Overdrive Gain, Bass, Middle,
Controls Treble, Normal Master, Overdrive Master,
Presence
Tubes
5x 12AX7 Preamp
2x 6L6 Power
Rectifier Solid state
Footswitch Single button - Normal/Overdrive
soldano
DESIGN BY
Channels 2 - Normal and Overdrive (foot-switchable)
Output Power
50 watts into single 4-ohm, parallel 8-ohm
or parallel 16-ohm speaker outputs
Dimensions 9.5”H x 9.5”D x 25”W
Weight 40 lbs net
JCA50H
50 watts from a pair of 6L6 power tubes and all the features
of our JCA100H makes our JCA50H ideal for gigging musicians
who need plenty of stage volume with some nice power amp
distortion. The Normal channel can range from clean tones to
dirty rock riffs. The Overdrive channel is THE Soldano high-gain
lead tone. Pair it up with our JCA48S for a powerful half-stack, or
one or two of our JCA24S 2×12 cabs for extra versatility.
9
soldano
DESIGN BY
Welcome to Jet City
Presence
Tubes
5x 12AX7 Preamp
4x 6L6 Power
Output Power
100 watts into single 4-ohm, parallel
8-ohm or parallel 16-ohm speaker outputs
Weight 43.6 lbs net
JCA100H
With two channels of Soldano tone and 100 watts of pure tube
power, this amp was made for the big stage. The Normal channel
has plenty of headroom to deliver clear, bright clean tones and can
be driven hard enough to get downright raunchy. The Overdrive
channel is the circuit that made Soldano famous. It’s been
modeled and imitated, but this is the real-effing-high-gain-deal.
11
Presence, Depth, 100W/50W
Tubes
5x 12AX7 Preamp
4x 6L6 Power
JCA100HDM
Our new flagship is based on our popular JCA100H – two channels
of Soldano tone and 100 watts of pure tube power. The Crunch
channel has plenty of headroom to deliver clear, bright clean
tones and can be driven hard enough to get downright raunchy.
The Overdrive channel is the circuit that made Soldano famous.
The HDM version also includes the famous Soldano Depth Control,
and a metal front baffle, standard. The 100W/50W brings the
pain from four 6L6 output tubes in 100W mode, or in 50W, two
tubes are turned off, causing the power section to work harder to
reach the desired output level, resulting in some pretty hot power
amp distortion. Rounding out the feature set is the wire-mounted
blue LED, just because it looks cool. This LED is socket mounted
so it can be replaced with other colors, a daisy-chain of several
LEDs, or removed entirely.
Footswitch Single button - Crunch/Overdrive
Output Power
100/50 watts into single 4-ohm, parallel
8-ohm or parallel 16-ohm speaker outputs
Weight 43.6 lbs net
Welcome to Jet City
DESIGN BY
soldano
13
Channels 1
Controls
Preamp Gain, Bass, Middle,
Treble, Master, Presence
3x 12AX7 Preamp
Tubes 2x 12AX7 Reverb
2x EL84 Power
Output Power
JCA2112RC
JCA2112RC is a combo of our JCA20H and JCA12S, with tubedriven reverb included. Easy-access speaker connectors on the
rear panel allow JCA2112RC to drive external cabinets either with
or without the internal Jet City Eminence Custom driver. Stacked
on an additional JCA12S, the speaker volume doubles and the
added height brings the controls to arm’s length in a small club.
Amplifier Combos 2011
Driver
1x 12” Jet City Custom Eminence Driver
at 100 watts RMS
Dimensions 20”H x 21”D x 11”W
Weight 38.7 lbs net
Welcome to Jet City
DESIGN BY
Channels 2 - Crunch and Overdrive (foot-switchable)
soldano
Crunch Gain, Overdrive Gain, Bass, Middle,
Controls Treble, Crunch Master, Overdrive Master,
Presence
Effects Loop Tube-buffered, serial
Tubes
5x 12AX7 Preamp
2x EL84 Power
Output Power
Driver
at 100 watts RMS
Weight 38.7 lbs net
JCA2212C
A combo version of our JCA22H, it’s the complete package, with
two foot-switchable channels and crazy tube tone that ranges
from clean and jangly, to full-on Soldano high gain. Easy-access
speaker connectors on the rear panel allow JCA2212 to drive
external cabinets either with or without the internal Jet City
Eminence Custom driver. Stacked on an additional JCA12S, the
speaker volume doubles and the added height brings the controls
to arm’s length in a small club.
15
Presence
Tubes
5x 12AX7 Preamp
2x 6L6 Power
Footswitch Single Button - Normal/Overdrive
Cabinetry Void-free Plywood
Output Power
JCA5012C
The JCA5012 is the combo version of our JCA50H. It gives you
50 watts from a pair of 6L6 power tubes and all the features of
our JCA100H. It’s ideal for gigging musicians who need plenty
of stage volume with some nice power amp distortion. The
Normal channel can range from clean tones to dirty rock riffs.
The Overdrive channel is THE Soldano high-gain lead tone. Pair it
up with our JCA48S or JCA12S for extra versatility.
Amplifier Combos 2011
Driver
at 100 watts RMS
Weight 40 lbs net
Welcome to Jet City
DESIGN BY
Channels 2 - Clean and Crunch (foot-switchable)
soldano
Clean: Volume, Bass, Middle, Treble. Crunch:
Controls Gain, Bass, Middle, Treble, Crunch Master.
Global: Presence and foot-switchable Reverb.
Tubes
6x 12AX7 Preamp
2x 6L6 Power
Footswitch 2-button - Normal/Overdrive channel
(included) selection plus Reverb on/off
Cabinetry Void-free Plywood
Output Power
8-ohm speaker outputs
Driver
at 100 watts RMS
Weight 45 lbs net
JCA5212RC
The JCA5212RC is an all-original Soldano design for Jet City
Amplification. Soldano’s “Crunch” circuit is featured here again
– a preamp capable of a wide range of character – from clean
and bright to muscular and powerful. And our top-of-the-line
combo also includes Soldano’s “Clean” circuit – previously only
available in the Soldano Lucky 13, the Clean channel is wideopen with no gain control. Each channel also has a dedicated EQ,
for added tonal versatility.
There are a few more tubes here, too – both the 3-spring reverb
and the effects loop are tube-driven for rich, warm effects. And
like all Soldano designs, it’s all about the purity of tone in 5212
again – not a mini-switch, pull-pot, or other secret-sauce knob
will be found anywhere on this amp.
17
JCA12XS
Cabinet 1x12”
The JCA12XS uses the same 100-watt, custom Eminence driver as the
12S, 24S and 48S cabinets, but conveys more of a midrange “growl”
thanks to its compact footprint. With its matching perforation pattern
and mini badge, it’s the perfect companion for the 5-watt PicoValve, but
is fully capable of cranked, 100-watt operation. A convertible rear panel
allows you to operate the 12XS in half-open or closed-back configuration,
so “tuning for the room” is as simple as removing 3 screws.
JCA12S
Cabinet 1x12”
With a Jet City Custom Eminence driver and a single input, the JCA12S
is our straightforward tone box. Use it as the foundation of a 20 watt
half stack with JCA20H or even in a full stack configuration. It’s also
the same dimensions as our JCA2112RC so stack them up for increased
speaker volume.
Inputs 1× 16-ohm, ¼”
Power Handling 100 watt RMS
Driver 1× 12” Jet City Custom Eminence Driver
Dimensions 14”H x 14” W x 7”D
Weight 18 lbs net
Amplifier Cabinets 2011
Inputs 1× 16-ohm
Driver 1× 12” Jet City Custom Eminence Driver
Weight 26.6 lbs net
Welcome to Jet City
JCA48S
Cabinet 4x12”
This is the same design as Soldano’s signature 4×12, and we’ve loaded
it with Jet City Custom Eminence Drivers and added switchable mono/
stereo operation. JCA20H sounds big and mean when it moves a lot of
air through this cabinet, but pair it with JCA100H and really experience
what a high-gain half stack can do.
JCA24S
Cabinet 2x12”
A pair of Jet City Custom Eminence drivers and switchable mono/
stereo input jacks gives JCA24S speaker volume and connection options
together in one package. JCA24S is a good mate for any of the Jet City
heads. Move the feet and stand it up on one end to make a great looking
rig which also brings the controls of your JCA20H within easy reach.
Inputs
Power Handling
1x 8ohm for mono or
2x 16ohm for stereo operation
200 watts RMS mono or 100 watts RMS per
channel for stereo operation
Drivers 2× 12” Jet City Custom Eminence Drivers
Weight 40.2 lbs net
Inputs (1) 16-ohm - ¼” mono, (2) 8-ohm - ¼” stereo
Power Handling
400 watts RMS mono or 200 watts RMS per
channel for stereo operation
Drivers 4× 12” Jet City Custom Eminence Drivers
Weight 69.5 lbs net
19
JCA24S+
Cabinet 2x12”
The JCA24S+ takes our tried and true 24S a step beyond, with THD
porting and an integrated Jet Direct – speaker-emulated output box
designed by Doug Roberts of Roberts Retrovalve. Mic the custom-voiced
Eminence drivers traditionally or take the Jet Direct’s simulated “mic’d
speaker” output directly to the board via XLR. The 24S+ has a ¼”
Thru output that allows you to power a second cabinet in parallel, a
convertible back baffle that allows for closed or partially open-back
operation and switchable mono/stereo operation.
JCA12S+
Cabinet 1x12”
The JCA12S+ takes our tried and true 12S a step beyond, with THD porting
and an integrated Jet Direct – speaker-emulated output box, designed by
Doug Roberts of Roberts Retrovalve. Mic the custom-voiced Eminence
driver traditionally or take the Jet Direct’s simulated “mic’d speaker”
output directly to the board via XLR. The 12S+ has a ¼” Thru output that
allows you to power a second cabinet in parallel, AND a convertible back
baffle that allows for closed or partially open-back operation.
Inputs 1× 16ohm ¼”
Direct Output 1x XLR speaker-mulated Line Level
Thru Output 1x ¼” Parallel 16ohm Speaker Level
Cabinetry Void-Free Plywood
Drivers 1× 12” Jet City Custom Eminence Driver
Weight 26.6 lbs net
Inputs
Outputs
Power Handling
1× 8ohm ¼” for mono or
2x 16ohm ¼” for stereo operation
1x 16ohm ¼” Thru (speaker level) output
1x XLR speaker-emulated (line level) output
200 watt RMS or 100 watt RMS per channel for
stereo operation
Drivers 2x 12” Jet City Custom Eminence Drivers
Dimensions 20”H x 28”W x 12” D
Weight 40.2 lbs net
Welcome to Jet City
JCA48S+
Cabinet 4x12”
The JCA48S+ takes Soldano’s signature 4×12 a step beyond with an
integrated Jet Direct speaker-emulated output box, designed by Doug
Roberts of Roberts Retrovalve. Mic the custom-voiced Eminence drivers
traditionally or take the simulated “mic’d speaker” output directly to the
board via XLR. The 48S+ has a ¼” Thru output that allows you to power
a second cabinet in parallel and switchable mono/stereo operation.
JCA48ST
Cabinet 4x12”
This is the same design as Soldano’s signature 4×12 cabinet. We’ve
loaded it with Jet City Custom Eminence Drivers and added switchable
mono/stereo operation. JCA48ST has a straight front, so you can pair it
with JCA48S+ for a full stack, or use it on its own for a modern-looking
half stack.
Inputs
Outputs
Power Handling
(1) 16-ohm - ¼” mono
(2) 8-ohm - ¼” stereo
1x 16ohm ¼” Thru (speaker level) output
1x XLR speaker-emulated (line level) output
400 watt RMS mono or
200 watt RMS per channel for stereo operation
Weight 69.5 lbs net
Inputs
Power Handling
(1) 16-ohm - ¼” mono
(2) 8-ohm - ¼” stereo
400 watt RMS mono or
200 watt RMS per channel for stereo operation
Weight 69.5 lbs net
21
JetStream ISO12
The JetStream ISO12 from is a great solution for a variety of applications.
Wanna CRANK your tube amp in a home recording environment? Need
to manage your stage volume and feed the mains in a club?
We turned to our allies at EMINENCE SPEAKER for their expertise in
this great new product. Eminence designed this ISOLATION cab to our
specifications, and handled the super-smart stuff in the acoustic design
too. Then we loaded it with our Custom Eminence Jet City 12” driver.
Plug your tube amp into the speaker input, and set up your amp tone –
go ahead and turn it up! Clip in your favorite guitar-recording mic and
position it how you prefer. Then close up the JetStream’s front door,
greatly reducing the sound level in the room. Connect the ISO12’s XLR
output to a recording workstation and capture screaming amp tones
without waking the neighbors, or send it to the front-of-house PA system
for a cranked amp quality at a controlled listening level.
Inputs 1× 16ohm, ¼”
Outputs 1× XLR – microphone-level
Drivers 1× 12” Jet City Custom Eminence Driver
Weight 55 lbs net
Welcome to Jet City
Input 1x ¼” input
Output 1x ¼” output
Control
Independent control of Overdrive and
“Afterburner” boost stage
True Bypass
Will not “suck” the tone from your rig
Operation
Volume Control Adjusts the overall output level
Tone Control Adjusts the overall tone
Overdrive Control Adjusts the amount of OD for the first stage
Boost Control Adjusts the level of the second stage
On/Off Switch Engages/bypasses the pedal
Boost Switch Engages/bypasses the 2nd OD stage
On/Off and
For high visibility on the darkest stage
Boost LEDs
Aluminum and
Strength and durability for the gigging pro
Steel Housing
Power Supply 9V Adapter or battery powered
AFTERBURNER
The Afterburner is a two stage overdrive in a road-ready,
aluminum and steel housing. The first stage is a straight-up
overdrive for adding gain to the front-end of a tube amp. The
second stage is a gain boost to increase saturation and sustain
for solos, etc.
23
Input 1x ¼”
Output 1x ¼”
True Bypass
Will not “suck” the tone from your rig
Operation
Gain Control Adjusts the amount of gain applied to the signal
Tone Control Adjusts the overall tone
Volume Control Adjusts the distorted signal’s overall output level
On/Off and
Boost LEDs
Aluminum and
Steel Housing
SHOCKWAVE
DISTORTION
The Shockwave is a full-on, raucous-yet-refined distortion
pedal, suited for use with nearly any amp. With tones ranging
from lower-gain “British” crunch, to a riff-inspiring, full-blown
saturation, this box is a must-have for the serious and versatile
guitarist. Apply it to a clean amp setting and the Shockwave adds
a “lead channel” to your single-channel amplifier, complete with
a separate tone control.
Amplifier Pedals & Boxes 2011
Welcome to Jet City
GUITARSLINGER
OVERDRIVE
The GuitarSlinger Overdrive, designed by international guitar
hero Alex Beyrodt, was previously only available through
GuitarSlinger’s one-at-a-time, hand-built operation. This truly
boutique pedal is capable of pushing your amp’s clean channel
into a fat crunch, or distorted channel into a heavy lead
distortion. The additional bright switch adds high-frequency
clarity and definition.
Input 1x ¼”
Output 1x ¼”
On/Off LED For high visibility on the darkest stage
Aluminum and
Steel Housing
25
GUITARSLINGER
HIGH-GAIN BOOST
The GuitarSlinger High Gain Boost, designed by international
guitar hero Alex Beyrodt, was previously only available through
GuitarSlinger’s one-at-a-time, hand-built operation. This truely
boutique pedal will give your amp’s distorted lead tone more gain
saturation, and the boost feature will allow you to cut through
the mix handily during solos.
Input 1x ¼”
Output 1x ¼”
Aluminum and
Steel Housing
Welcome to Jet City
JHS A/B BOOST
We partnered with JHS Pedals to develop this unique and
powerful hybrid. The JHS A/B Boost allows dual amp players to
switch amps on the fly, with the added flexibility of an adjustable
boost for cutting through the mix when needed. Just like that,
we doubled the available voices in your 2-amp rig, and we did it
in a streamlined, 2-button, 1-knob footswitch.
Input 1x ¼”
Output 1x ¼”
Boost Knob For adjusting the boost output level
A/B Switch For switching between A and B outputs
Boost Switch For engaging/disengaging the boost circuit
A/B and Boost
LEDs
Aluminum and
Steel Housing
27
JHS BOOST
OVERDRIVE
Another JHS/Jet City collaboration that yielded an absolute
dream box for the single-channel amp player. Add just the right
amount of gain to the front end of your amp with the adjustable
“drive” control and set your output level for solos and additional
power tube break-up.
Input 1x ¼”
Output 2x ¼”
Drive Knob
For adjusting the amount of overdrive applied
to the signal
Volume Knob For adjusting the output volume
Aluminum and
Steel Housing
Welcome to Jet City
FLOOD–ANALOG
DELAY
We set out to create the most affordable and best sounding
analog delay on the planet, and this was the result. Introducing
The Flood, Analog Delay. It’s a straight-forward stomp-box with
the controls you need, in a layout that’s easy to tweak on the
fly. With 550 milliseconds of delay at your disposal, you can take
the Flood anywhere from a simple slap back delay to a full-on
swirling chaos of noise and everywhere in between.
Input 1x ¼”
Output 1x ¼”
Time Knob Adjust the time between delay repetitions
Repeats Knob Adjust the amount of delay repetitions that occur
Level Knob
Adjusts the amount of delay
applied to the original signal
Aluminum and
Steel Housing
29
JET DIRECT
Always wanted a line out for your guitar amplifier but didn’t want
to pay for an expensive mod? The JetDirect is your answer.
Put this inconspicuous little “black box” between your head
and cabinet and voila! Thanks to Doug Roberts’s emulation
circuitry, the XLR line output actually sounds like a mic’d speaker.
Eliminate stage mics all together, making the sound-man’s job a
little easier or use the line signal as an additional layer for your
“wall of sound”.
Aluminum and
Steel Housing
Welcome to Jet City
DESIGN BY
soldano
31
P.O. Box 468 | Redmond, WA 98073
Phone: (425) 698-1296 | Fax: (206) 260-8824
Mon-Fri 8:30AM – 5:00PM PST
[email protected] | [email protected]
[email protected]

Jet City Catalog (Fall)

Transcription

Similar documents

H. Alexander Dumble Suite Two Musical Sound

SUPERWINCH OVERDRIVE Kit Part No. 811 / RTC8020

1986 Dumble OverDrive Special

H1 / Jet Asia Airways (JF)

World famous as the ultimate jet boat experience, Shotover Jet has

sport jet - Hewescraft

805- overdrive pedal user`s guide

User manual HB-10G Guitar Amplifier

....aka, the Reno Air Races are held year- ly at Reno