5" (13cm) CAPACITY CHIPPER/SHREDDER

Transcription

TABLE OF CONTENTS
KUBOTA COMPATIBILITY...............3
HP TO CC CONVERSION CHART.......4
FAQ................................................5
PRODUCT NOISE LEVELS..............10
CHIPPER COMMONALITIES...........11
CHIPPER/SHREDDERS..................12
Model: SC2170
Models: SC3206, SC3265, SC3306, SC3306E &
SC3342
CHIPPER/SHREDDER/BLOWER....15
Models: SC5720B
CHIPPERS.....................................16
Model: CH4400
Model: CH5653
Models: CH611DH & CH6720H
SKID STEER CHIPPERS.................31
Models: CH450H, CH500H & CH800H
LOG SPLITTERS............................32
Models: LS22 & LS27
WHEELED TRIMMERS....................33
Models: WT189, WT190, WT190T & WT190S
STUMP GRINDER..........................35
Model: SG340
WHEELED VACUUMS.....................36
Models: WV160, WV160S, WV190 & WV190S
DEBRIS LOADERS.........................37
Models: DL8, DL10
Model: DL12653, DL12720
ECHO BEAR CAT GEAR..................39
WARRANTY COVERAGE.................40
Models: CH8720iH & CH8993H
U.S. and Canada
Models: CH911DH & CH922DH
All areas Outside the U.S. and Canada
PTO MACHINES............................24
Model: SC5540
Model: SC5540B
Model: CH45540
Models: CH5540 & CH5540H
Model: CH8540
BELT REFERENCE GUIDE...............44
ROTOR & SHREDDER KNIVES KITS.45
BLADE KITS..................................46
ACCESSORIES...............................48
Models: CH9540H & CHF9540H
2
www.bearcatproducts.com
Kubota Compatibility
CH45540
15-28HP
SC5540
25-45HP
SC5540B
25-45HP
CH5540
25-45HP
CH5540H
25-45HP
CH8540
35-60HP
CH9540H
35-60HP
CHF9540H
35-60HP
CH500H
15-22GPM
CH800H
25-38GPM
BX1860
BX2360
BX2660
BX25
BX1870
BX2370
BX2670
BX25D
B2650SD
B3350HSD
B3350SUHSD
B2320
B2620
B2920
B2320DTN-1
B2320HSDN
B3000B3200HSD
B3200HSD
B3300SUB26
B3300SU
B26
L39
L45
M59
L3301
L3901
L4701
L3560
L4060
L4760
L5060
L5460
L6060
L3240
L3540
L3940
L4240
L4740
L5040
L5240
L5740
L3200
L3800
L4600
MX4700 GEAR 2WD 4WD
MX4700 HST 4WD
MX5100 GEAR 2WD 4WD
MX5100HST 4WD
M5640U
M5640SUD
M7040SU
M7040SUD
M7040SUH
M7040SUHD
M5140
M6040
M7040
M8540
M9540
M6060
M7060
SVL75
SVL75-2
SVL90
SVL90-2
888.625.4520
3
HP to cc CONVERSION CHART
GASOLINE ENGINES
cc
Gross
HP
kW
Model Number
148
3.5**
2.6
70530*
Vertical
-
5**
3.7
74050*, 73350*
Honda
Vertical-GCV
-
5**
3.7
75050*, 75350*
Subaru
Horizontal
170
5.7
4.3
SC2170, LS22
Honda
Vertical-GCV
160
4.4
3.3
WT160S (73455), WT160T (74455), WV160,
WV160S
Subaru
Vertical
190
5.5
4.1
WT24, WT24S, WT24T, WT189
Briggs & Stratton
Vertical-Intek
190
6**
4.8
WV190* (75060), WV190S* (75360)
Briggs & Stratton
Vertical-Quantum
190
6.5**
4.8
WT190* (75065), WT190T* (76065), WT190S*
(75365)
Briggs & Stratton
Vertical/Elec.-Quantum
190
6.5**
4.8
WT190SE (73265)*
Briggs & Stratton
Horizontal
205
5.5**
4.1
SC3206 (70050), SC2206
Subaru
Horizontal
210
7
5.2
LS27
Honda
Horizontal/Elec.-GX
242
8**
6.0
70385*
Subaru
Horizontal
265
9
6.7
SC3265
Honda
Horizontal-GX
270
8.5
6.4
SC3270 (70380)*, SC3270T (70580)*
Briggs & Stratton
Horizontal/Elec.
305
8**
6.0
SC3305E (70085)
Briggs & Stratton
Horizontal
305
8**
6.0
SC3305 (70080)
Briggs & Stratton
Horizontal/IC
305
8**
6.0
70180*
Briggs & Stratton
Horizontal/Elec.
306
8**
6.0
SC3306, SC3306E
Honda
Vertical-GXV
340
8.9
6.6
SG340 (73711), 75011*
Honda
Vertical/Elec.-GXV
340
8.9
6.6
75111*
Briggs & Stratton
Horizontal-Intek
342
11**
8.3
SC3342 (75311)
Honda
Horizontal-GX
390
11.7
8.7
DL8390, CH4390 (73413)*
Subaru
Horizontal
404
14
10.4
CH4400, DL8
Briggs & Stratton
Horizontal Vanguard
570
18
13.4
DL10570, DL10 (Elec. Start)
Honda
Horizontal/Elec.-GX
614
20**
14.9
SC5614 (71020)*, CH6614 (71620)*, CH6614H
(72620)*
Subaru
Horizontal/Elec.
653
22
16.4
CH5653,DL12653
Honda
Horizontal/Elec.-GX
670
24**
17.9
CH6670H (76624)*, CH8670H (76824)*,
SC5670 (75524)*, DL12670 (75124)*
Subaru
Horizontal/Elec.
720
25
18.6
DL12720,SC5720B, CH6720H
Subaru
Horizontal/Elec./Fuel
Injected
720
28
20.9
CH8720iH
Briggs & Stratton
Horizontal/Elec.-Vanguard
993
35
26.1
CH6993H (76635)*, CH8993H (76835)
Kohler
Horizontal/Elec.
730
25
18.6
CH6730H
Engine Manufacturer
Engine Type
Briggs & Stratton
Horizontal
Briggs & Stratton
DIESEL ENGINES
Engine Manufacturer
Engine Type
Liters
Kubota
1105/Mech.
1.1
Gross
HP
28
kW
Model Number
20.6
CH611DH (76628)
Kubota
1105/Mech.
1.1
28
20.6
CH911DH (72928)
Kubota
2203/Mech.
2.2
50
36.8
CH922DH (74950)
*A non-current ECHO Bear Cat model number **Horsepower rating based on Engine Manufacturer at time of manufacture
4
FAQ
CHIPPER/SHREDDERS
MODELS: SC2170, SC3206, SC3265, SC3306, SC3306E**, SC3342, SC5540, SC5540B* & SC5720B**
What are these machines designed for?
The ECHO Bear Cat chipper/shredders are designed to effectively reduce the volume of wood, leaves and other organic
material.
When should I chip?
If you don’t plan on composting the material, material is green and stringy or larger than .75" in diameter.
When should I shred?
If you plan on composting or if the material is smaller than .75", use the shredder. Shredding is also an efficient way
to reduce the volume of leaves or prunings.
How long will the chipper blades last?
Depending on the type of wood, age and cleanliness, chipper blades will work well for between 5-15 hours.
Dry, dirty wood will dull the blades faster. Alternate dry and wet material to extend blade life.
What is the maximum size of material will these machines chip or shred?
ECHO Bear Cat 2" chipper/shredders will chip up to 2" (5cm) and shred up to .75" (2cm) diameter material.
Do not attempt to put material larger than .75" in diameter into the shredder hopper. Doing so may cause
machine failure and will void the warranty.
*PTO Machines
**Electric start models do not include battery.
LOG SPLITTERS
MODELS: LS22 & LS27
What is the cycle time?
The LS22 has a cycle time of 12 seconds and the LS27 has a cycle time of 14 seconds.
Does my splitter come with hydraulic fluid?
The hydraulic system on this log splitter comes filled with high performance Automatic Transmission Fluid (ATF) to accommodate
operation in temperatures below 32 degrees F (0 degrees C). When adding or replacing ATF, use a Dexron® III or Mercon® qualified
product. Check the fluid on level ground with the jack stand in the down position.
DO NOT MIX HYDRAULIC FLUID WITH ATF. THIS MAY DAMAGE THE SYSTEM AND COULD VOID WARRANTY.
DO NOT OVERFILL.
FILL THE HYDRAULIC FLUID TANK WITH THE RAM RETRACTED.
What size logs can I split?
The maximum length of log that you can split is 24" (60.9cm) long. You can split larger diameter logs with the unit in the vertical
position.
How difficult is it to perform maintenance on the machine?
ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed
routinely with blades, belts and bearings being most important.
888.625.4520
5
FAQ
WHEELED TRIMMERS
MODELS: WT189, WT190, WT190T & WT190S
Can I operate the Wheeled Trimmer on a hillside?
The ECHO Bear Cat Wheeled Trimmer is capable of continuous operation on a slope not to exceed 15 degrees. Limited operation
on slopes greater than 15 degrees is allowed.
Do the engines have an oil pump?
No. The engines obtain lubrication from a “Splash Lube” system.
How do I change the trimming line?
To wrap the cutting string in the standard configuration, feed the cutting string through the second hole on either end of the
trimmer head leaving approximately 8 inches for the cutting surface. Total recommended string length is 20-1/2". Continue by
weaving the cutting string through the first hole directly beside the second hole. Loop the cutting string back and feed through the
first hole on the opposite end of the trimmer head. Pull the cutting string tight. Feed through the remaining second hole and pull
the cutting string tight. The cutting strings in the middle two holes should be the same length. If the length differs, cut to an even
length. It may be necessary to remove pieces of broken or worn string before new string can be properly installed.
How many speeds does the Self-Propelled Wheeled Trimmer (WT190S) have and how fast does it go?
There are three separate gears on the transmission of the Self-Propelled Wheeled Trimmers, and the speeds range from
1 to 3 mph.
What is the Sabre Tooth Blade and Triple Blade Brush Cutter used for?
The Sabre Tooth Blade (14" dia.) is designed to be used for cutting small trees, saplings, bushes etc. up to 4" in diameter.
The Nylon Blade Kit is designed for the heavy grass, weeds and brush growth.
Do the Sabre Tooth blade and Triple Blade Brush Cutter fit all WT189 & WT190 models?
Yes. By removing the mow ball both accessories will work and can be height adjusted to preference.
STUMP GRINDER
MODEL: SG340
What is the application of the Stump Grinder?
The ECHO Bear Cat Stump Grinder is designed with a compact 23" wheel base, enabling it to be used on stumps found in places
large stump grinders cannot get to.
How do I engage the Stump Grinder?
Position the stump grinder so the cutter head is adjacent to the stump. Start the stump grinder and hold up the bottom bail so
it doesn't shut off. Pull the top bail to the handle and hold it there to activate the left wheel brake, holding it so it does not turn.
Gradually, using the locked left tire as a pivot point, slowly pivot the cutter head until the cutting teeth contact the stump. Pivot
the stump grinder on the left wheel in a slow, smooth sweeping motion from left to right as the teeth grind the stump. Do not force
the cutting teeth. Check position by watching through the screen opening. Grind the stump down to a maximum of 4 inches below
ground level.
6
FAQ
CHIPPERS
MODELS: CH4400, CH45540, CH5653, CH5540, CH5540H, CH611DH, CH6720H, CH8540, CH8993H,
CH8720iH, CH9540H, CHF9540H, CH911DH & CH922DH
What are these machines designed for?
The ECHO Bear Cat chipper is designed to effectively reduce the volume of wood, branches, and other organic material.
The typical application for this product group is anywhere from light commercial to municipalities and/or rental.
What types of chippers are available?
ECHO Bear Cat makes chippers with gravity or hydraulic feed, powered by an engine package or a tractor PTO. A hydraulic feed machine
has a hydraulic driven feed roller to efficiently feed branches to the chipper rotor.
When should I buy a gravity feed machine?
If you have an infrequent need for a chipper and time is not a factor, a gravity feed machine will fit your needs.
When should I buy a hydraulic feed machine?
If time or efficiency is an issue, a hydraulic feed chipper allows you to be more productive.
What does it mean when you say hydraulic feed chippers feature an "Auto Feed" system?
"Auto Feed" refers to the way the system senses if the rotor has slowed down too much for maximum chipping performance. When this
happens, the feed roller stops feeding the material, allowing the engine and rotor RPM to recover. Once the engine and rotor RPM have
recovered sufficiently, the feed roller reengages and begins feeding material again. It has also been referred to as the "try again" feature.
Depending on the type of wood, age and cleanliness, chipper blades will work well for between 5-15 hours. Dry, dirty wood will dull the
blades faster. Alternate dry and wet material to extend blade life. Hydraulic feed chippers will have longer blade life.
Will electric start chippers include the starting battery?
No. ECHO Bear Cat products are not shipped with a battery and will need to be purchased separately.
POWER TAKE OFF (PTO) MACHINES
MODELS: CH45540, CH5540, CH5540H, SC5540, SC5540B, CH8540, CH9540H & CHF9540H
When do I buy a chipper powered by a tractor Power Take Off (PTO) vs. an engine-driven unit?
If you own a tractor a PTO chipper is a smart economic choice.
What are the tractor requirements for these chippers and chipper/shredders?
The ECHO Bear Cat 4.5" chipper requires a tractor with PTO hp ranging from 15hp to 28hp. The ECHO Bear Cat 5" chippers and chipper/
shredders require a tractor with PTO hp ranging from 25hp to 45hp. The ECHO Bear Cat 8" and 9" chippers require a tractor with PTO hp
ranging from 35hp to 60hp.
Will the chipper fit my tractor?
The ECHO Bear Cat chippers and chipper/shredders are designed to fit all Category 1 three-point hitches. Chipper weight and tractor hp
needs to be taken into consideration. All Chipper models fit a Category 1 Quick Hitch.
888.625.4520
7
FAQ
SKID STEER CHIPPERS
MODELS: CH450H, CH500H & CH800H
What is this machine designed for?
The ECHO Bear Cat chipper is designed to effectively reduce wood, brush, and other organic material while using your skid steer as the
power unit.
What is the capacity and hydraulic flow requirements of these machines?
The CH450H has a maximum capacity of 4.5" (11cm) and requires at least 11 to 15 GPM (41.6 to 56.8 LPM) on a mini skid steer.
The CH500H has a maximum capacity of 5" (13cm) and requires at least 15 to 22 GPM (56.7 to 83.3 LPM) on a low-flow skid steer.
The CH800H has a maximum capacity of 8" (20cm) and requires at least 25 to 38 GPM (94.6 to 43.8 LPM) on a hi-flow skid steer.
Will the chipper fit my skid steer?
The ECHO Bear Cat CH500H and CH800H skid steer chippers are equipped with universal attachment ends, capable of hooking up to most
skid steers. The CH450H is designed to mount to mini skid steers.
Depending on the type of wood, age and cleanliness, chipper blades will work well for between 5-15 hours. Dry, dirty wood will dull the
blades faster. Alternate dry and wet material to extend blade life. Hydraulic feed chippers will have longer blade life.
WHEELED VACUUMS
MODELS: WV190, WV190S, WV160 & WV160S
Where can I use the Wheeled Vacuum?
The Wheeled Vacuum is designed to be used for residential, commercial or municipal pickup of leaves, grass or other light debris.
How much reduction of debris will I get?
There is not much reduction; however, by passing through a six-bladed fan into the bag some natural breakage occurs allowing the
five-bushel bag to be filled. Reduction through compaction will happen.
Is it hard to push the Wheeled Vacuum on turf?
The large wheels have ball bearing hubs that allow easy movement.
How many speeds do the Self-Propelled Wheeled Vacuums have and how fast does it go?
There are three separate gears on the transmission of the Self-Propelled Wheeled Vacuum, and the speed range is 1 to 3 mph.
How many height adjustments does the Wheeled Vacuum have?
The Wheeled Vacuum can be adjusted into four different nozzle settings ranging from .25" - 4.5" (.64cm-11.4cm) to accommodate all types
of terrain.
What do I use the optional 4" (10.1cm) Vacuum Hose Kit for?
This hose kit is designed to allow vacuuming hard to reach places.
8
FAQ
DEBRIS LOADERS
MODELS: DL8, DL10, DL12653 & DL12720
What is the application for the Debris Loader?
The Debris Loader is used for commercial or municipal pickup of leaves, grass, or other light debris.
How much reduction of debris will I get?
There is very limited reduction of the material due to the design for compaction vs. reduction. The Debris Loader is designed to effectively
load leaves, grass, or other light debris from the ground to a vehicle collection bin.
Is there a rental application for this machine?
Yes. Commercial landscapers and municipalities will have a seasonal need for this piece of equipment.
Will electric start Debris Loaders include the starting battery?
No. ECHO Bear Cat products are not shipped with a battery and will need to be purchased separately.
"I have a chipper that requires the belt to be engaged. How do I
engage and disengage the belt without it squealing and causing
damage to the belt or other drive components?"
ENGAGING THE BELT:
1. AFTER engine is warmed and ready for use, move the throttle control back down to approximately 25% of full throttle.
2. When engine is running at approximately 25% of full throttle, SLOWLY engage belt by using the belt engagement .
DO NOT engage the belt with engine running at high RPM. Engaging belt while engine is running at high RPM WILL result in
significant belt squealing and possible damage.
Engaging belt while engine is running at high RPM may also damage vital drive components of the chipper or chipper/shredder,
3. If the chipper engine stalls while engaging the belt, return the belt engagement back to the START position, restart engine,
SLIGHTLY increase throttle and attempt engagement again.
4. Once the belt is engaged, SLOWLY increase throttle to 100% or full throttle.
5. ALWAYS run the machine at 100% or full throttle when chipping or shredding material.
ENGINE SHUTDOWN/BELT DISENGAGEMENT:
1. WITH THE BELT STILL ENGAGED, SLOWLY move the throttle to the SLOW position.
2. Allow the engine to run at slow idle for 30-60 seconds. This will slow the rotor down to the same RPM as the engine.
3. Stop the engine by moving the throttle to the STOP position or turning off the ignition switch.
4. Allow rotor to come to a complete stop.
5. Once the engine is off and the rotor has completely stopped, the belt can be disengaged by moving the belt engagement back to
the START position.
NEVER disengage the belt as part of the stopping or shut down process. The belt should remain engaged during the entire shutdown process.
Leaving the belt engaged is a vital part of proper shutdown and ensures the rotor stops spinning in conjunction with the engine
shutting off.
888.625.4520
9
PRODUCT NOISE LEVELS
Model
Description
dB
(Pressure)
dB
(Power Level)
CHIPPER/SHREDDERS
SC2170
2" (5cm) Capacity – Subaru SP 170cc
97
111
SC3206
3" (7.6cm) Capacity – Briggs & Stratton OHV 205cc
97
111
SC3265
3" (7.6cm) Capacity – Subaru EX 265cc
97
111
SC3306
98
112
SC3306E
3" (7.6cm) Capacity – Briggs & Stratton OHV 306cc, Electric Start
98
112
SC3342
94
114
97
120
CHIPPER/SHREDDER/BLOWER
SC5720B
5" (13cm) Capacity Chipper/Shredder/Blower Subaru 720cc
LS22
Subaru SP 170cc
N/A
N/A
LS27
Subaru SP 210cc
N/A
N/A
WT189
Subaru EA190V, 189cc
87
101
WT190
Briggs & Stratton Quantum 190cc
87
101
WT190T
87
101
WT190S
87
101
SG340
Honda GXV 340cc
73
87
LOG SPLITTERS
WHEELED TRIMMERS
STUMPGRINDER
CHIPPERS
CH4400
4" (10cm) Capacity – Subaru EX 404cc
93
107
CH5653
5" (13cm) Capacity – Subaru EH 653cc
92
109
CH611DH
6" (15cm) Capacity – Kubota Diesel 1.1 Liter with Hydraulic Feed
94
111
CH6720H
6" (15cm) Capacity – Subaru 720cc with Hydraulic feed
94
117
CH8720iH
8" (20cm) Capacity – Subaru 720cc – Turntable with Hydraulic Feed
96
114
CH8993H
8" (20cm) Capacity – Briggs & Stratton Vanguard 993cc – Turntable with Hydraulic Feed
94
114
CH911DH
9" (23cm) Capacity – Kubota 1.1 Liter Diesel with Hydraulic Feed
95
112
CH922DH
9" (23cm) Capacity – Kubota 2.2 Liter with Hydraulic Feed
95
112
PTO CHIPPERS AND CHIPPER/SHREDDERS
CH45540
4.5" (11cm) Capacity – 540 PTO – 15-28 hp Input Range
87*
107
CH5540
5" (13cm) Capacity – 540 PTO – 25-45 hp Input Range
86*
103
CH5540H
5" (13cm) Capacity – 540 PTO with Hydraulic Feed – 25-45 hp
86*
103
SC5540
5" (13cm) Capacity – 540 PTO – Chipper/Shredder – 25-45 hp Input Range
99*
113
SC5540B
5" (13cm) Capacity – 540 PTO – Chipper/Shredder – PTO - 25-45 hp
99*
113
CH8540
8" (20cm) Capacity – 540 PTO – 35-60 hp Input Range
95*
112
CH9540H
9" (23cm) Capacity – 540 PTO with Hydraulic Feed - 35-60 hp
95*
112
CHF9540H
9" (23cm) Capacity – 540 PTO with Hydraulic Feed - 35-60 hp
95*
112
WV160
Honda OHC 160cc
84
98
WV160S
Honda OHC 160cc – Self-Propelled
84
98
WV190
Briggs & Stratton OHV 190cc
84
98
WV190S
Briggs & Stratton OHV 190cc – Self-Propelled
84
98
DL8
Subaru EX 404cc – 8" (20.3cm) Intake
116
134
DL10
Briggs & Stratton Vanguard (Elec. Start) 570cc – 10" (25.4cm) Intake
120
138
DL12653
Subaru EH 653cc – 12" (30.5cm) Intake
97
120
99
122
WHEELED VACUUMS
DEBRIS LOADERS
DL12720
Subaru EH 720cc – 12" (30.5cm) Intake
*based off towable model
10
These values were obtained using harmonized EN ISO 3744:2010
CHIPPERS
CHIPPER COMMONALITIES
14" (35.6cm) rotor weighing 49 lbs. (22.2kg) fully assembled
•
•
•
•
•
•
•
1" (2.5cm) thick machine balanced cantilever rotor
Models: CH4400, CH45540 & CH450H
Standard 4.5" x 9" (11.4cm x 22.9cm) discharge chute. Optional discharge chute is 4.5" (11.4cm) square
13" x 14.5" (33cm x 36.8cm) feed chute
Two reversible heat-treated steel chipper blades
Four-sided cutter bar/anvil
Chipper Blade Kit: P/N: 76295-00
•
•
•
•
•
•
•
•
1.25" (3.2cm) thick machine balanced
4" (10cm) and 5" (13cm) chippers, Models CH5540, CH500H, CH5540H & CH5653 – same chipper body
6" (15cm) discharge chute rotating 360 degrees
5.5" x 7" (14cm x 17.8cm) feed opening
Reversible heat-treated steel chipper blades.
Four-sided adjustable steel anvil/cutter bar
Double-banded belt drive, except model CH500H is hydraulic driven – no belts
Chipper Blade Kit: P/N: 72493
26" (66cm) rotor weighing 165 lbs. (74.8kg) fully assembled
•
•
•
•
•
•
•
•
•
•
•
1" (2.5cm) thick machine balanced cantilever rotor
Chipper Models: CH6720H & CH611DH
6.7" (17cm) square discharge chute
6.5" x 13.5" (16.5cm x 34.3cm) feed chute for easy feeding of limbs
Four reversible heat-treated steel chipper blades
Four-sided anvil/cutter bar mounted on the side of the feed chute
Triple-banded belt
New style local sensing two-stage pump with live hydraulics
SmartFeed Sensor
Hand-operated belt engagement lever
•
•
•
•
•
•
•
•
9" (23cm) machine – Model CHF9540H
6" (15cm) diameter square discharge. Discharges toward the ground from a height of 34" (86cm)
9" x 9" (23cm x 23cm) feed throat opening
16 reversible heat-treated steel chipper blades
Triple-banded belt drive
•
•
•
•
•
•
•
•
•
8" (20.3cm) and 9" (23cm) machines
Models CH800H, CH8720iH, CH8993H, CH8540, CH9540H, CH911DH & CH922DH – same chipper body
8" (20.3cm) discharge chute rotating 360 degrees
9" x 9" (23cm x 23cm) feed throat opening
Four reversible heat-treated steel chipper blades
Triple-banded belt drive, except model CH800H is hydraulic driven – no belts
888.625.4520
11
CHIPPER/SHREDDERS
Model: SC2170
ENGINE
EASY TO TRANSPORT
• Max torque: 8.3 ft-lbs at 2,500 rpm, runs at 3,800 rpm
• Weight of machine is distributed evenly throughout
FUEL CAPACITY
DISCHARGE SCREEN
DIRECT DRIVE
MACHINE DIMENSIONS AND WEIGHT
FEED CHUTES
• 120 lbs. (54.4kg)
• Subaru SP 170cc
• .9 gal. (3.4 liters)
• Shredder hopper is 16" x 20" (40.6cm x 50.8cm)
• Maximum shredder capacity of up to .75" (2cm)
• Maximum chipper feed size of up to 2" (5cm)
• Easy grip wide handle
• Comes standard with 1.13" screen (2.9cm)
• LxWxH – 29" x 23" x 50" (74cm x 58cm x 127cm)
SAFETY
• Meets ISO safety decal standards
CHIPPING BLADES & SHREDDING KNIVES
PARTS & ACCESSORIES
• Blade Dimensions: 3.125" x 2" x .25" (8cm x 5cm x .6cm)
• Fine Screen .75" (2cm) (P/N: 76893-35)
• Four reversible Shredder Knives (standard)
• Wet Debris Screen (P/N: 77639-35)
• Four additional Shredder Knives optional
• Shredder Knives Kit (P/N: 77616-00)
• Two reversible heat-treated steel chipper blades
CHIPPER/SHREDDER ROTOR ASSEMBLY
• Rotor weight is 15 lbs. (6.8kg)
• Rotor turns at 3,800 rpm
• Standard Screen 1.13" (2.8cm) (P/N: 76758-35)
• Additional Shredder Knives Kit (P/N: 77618-00)
• Chipper Blade Kit (P/N: 70738)
• Hour/Tach Kit (P/N: 31605-00)
• 12.8" diameter (32.6cm)
SC2170 Debris Screens
.75" Fine
12
1.13"
Standard
Wet
Debris
CHIPPER/SHREDDERS
3" (7.6cm) CAPACITY CHIPPER/SHREDDERS
1 of 2
Models: SC3206, SC3265, SC3306, SC3306E & SC3342
ENGINES
SC3206
• Briggs & Stratton OHV 206cc
• Max torque: 9 ft-lbs. at 2,700 rpm, runs at 3,600 rpm
SC3206
• Weighs 21 lbs. (9.5kg)
SC3306
• 1" (2.5cm) diameter rotor shaft
• Max torque: 14.5 ft-lbs. at 2,800 rpm, runs at 3,600 rpm
SC3306E
• Briggs & Stratton OHV 306cc – Electric Start
SC3265
• Subaru EX 265cc
• Rotates at 3,600 rpm
• 12" diameter (30.4cm)
SC3265, SC3306, SC3306E, SC3342
• 1" (2.5cm) diameter rotor shaft
• 12" diameter (30.4cm)
CHIPPER BLADES & SHREDDER KNIVES
• Two reversible heat-treated chipper steel blades
SC3342
• Blade Dimensions: LxWxH: 3.125" x 2"x .25"
(7.6cm x 5cm x 6cm)
• Eight Reversible Shredder Knives – SC3206
FUEL CAPACITY
• Twelve Reversible Shredder Knives
SC3265, SC3306, SC3306E, SC3342
• SC3206 - .8 gal (3 liters)
• SC3265 - 1.6 gal (6.1 liters)
• SC3342 - 1 gal. (3.8 liters)
• SC3306 & SC3306E - .8 gal. (3 liters)
BEARINGS
• Two 1" (2.5cm) greasable bearings with three bolt cast
flanges
BELT DRIVE
• With manual belt engagement
• SC3206, SC3306, SC3306E – single belt driven
• SC3265, SC3342 - d
ual belt driven
• Spring-loaded belt tensioner
FEED CHUTES
• Maximum chipper feed size of up to 3" (7.6cm)
SIDE DISCHARGE
• You don’t have to move the equipment as often with a side
discharge as you do with a bottom discharge
• Heavy-duty 7 gauge steel screens available
in four different sizes to fit your needs
CONVENIENT TRANSPORTATION
• Handle placement for the best control over various terrain,
or tip it back and use the hopper handle for transporting on
a smooth surface
• Pneumatic tires feature grease zerks, enabling easy
greasing of the hub
888.625.4520
13
CHIPPER/SHREDDERS
3" (7.6cm) CAPACITY CHIPPER/SHREDDERS
2 of 2
Models: SC3206, SC3265, SC3306, SC3306E & SC3342
HEAVY-DUTY CONSTRUCTION
•Extra strength and reinforcements in areas that matter
most
• 14 gauge (1.9mm) steel construction
• Built to last with welded construction instead of bolt
together.
MACHINE DIMENSIONS
• Road Towable Chipper/Shredder Trailer
(P/N: 77353-00)
• Supplemental Adapter Kit for wide body models Serial
C03477 & below
(P/N: 77700-00)
• Supplemental Adapter Kit for model SC3206 Serial
C03477 and below (P/N: 77701-00)
PARTS & ACCESSORIES
SC3206
WEIGHTS
• Screen - Fine .375" (.95cm) (P/N: 77382-12)
• SC3206 - 195 lbs. (88.5kg)
• Screen - Medium .75" (2cm) (P/N: 77383-12)
• SC3265 - 250 lbs. (113.4kg)
• Screen - Coarse Standard 1.375" (3.5cm) (P/N: 77384-12)
• SC3306 - 233 lbs. (105.7kg)
• SC3306E - 241 lbs. (109.3kg)
• SC3342 - 263 lbs. (119.3kg)
PARTS & ACCESSORIES
• Two-Wheel Tow Kit (P/N: 77000-00)
• Leaf Tamper (P/N: 70089)
• Screen - Wet Debris (P/N: 77385-12)
• Shredder Knives Kit – SC3206 (P/N: 77589-00)
SC3265, SC3306, SC3306E, SC3342
• Screen - Fine .375" (.95cm) (P/N: 77386-12)
• Screen - Medium .75" (2cm) (P/N: 77387-12)
• Screen - Coarse Standard 1.375" (3.5cm) (P/N: 77388-12)
• Screen - Wet Debris (P/N: 77389-12)
•
Debris Bag with Handles (P/N: 17854)
• 1-speed Blower Attachment (P/N: 70251)
• All Weather Cover (P/N: 70093)
• Shredder Knives Kit (P/N: 70973)
• Tach/Hour Meter (P/N: 31605-00)
• Attachable Debris Bag (P/N: 70355-00)
3" Debris Screens
.375"
.75"
1.375"
Standard
Wet
Debris
A 1.375" debris screen is standard with three others
available depending on desired mulch size/type.
14
CHIPPER/SHREDDER/BLOWER
5" (13cm) CAPACITY CHIPPER/SHREDDER/BLOWER
Models: SC5720B
ENGINE
• Subaru EH 720cc
DOUBLE-BANDED BELT DRIVE
• Manual belt engagement
FUEL CAPACITY
FEED CHUTES
• 9 gal. (34.1 liters)
• Shredder hopper is 13" x 18" (33cm x 48.7cm)
• Machine balanced
INTEGRATED DISCHARGE
• 1.5" (3.8cm)-diameter rotor shaft
• With a 360° rotatable, 6" (15.25cm) diameter steel
tubing with adjustable spout cap allows you to put the
chips where you want them the first time
• 20.6" (52.3cm) diameter
• Discharge height is 92" (234cm)
• Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy service
UNIQUE SCREENLESS SHREDDER
CHIPPER BLADES & SHREDDER KNIVES
• Unique product, self-feed chipper/shredder without a
screen. This greatly reduces the chance of plugging,
especially with damp material
• Four reversible heat-treated chipper steel blades
• Blade Dimensions: 3.125" x 2" x .25"
(7.6cm x 5cm x 6cm)
• 36 Shredder Knives
BEARINGS
• Two 1.5" (3.8cm) greasable bearings with two bolt
cast flanges
• 7 gauge steel
HIGHWAY TOWABLE
• 50" (127cm) tread width (center to center) and 5.3-12
tires with 1,000 lb. (454kg) torsion axle suspension
enables the chipper to be easily towed down the highway
TOWING WEIGHT
• 930 lbs. (422kg) with fluids at capacity
HITCH
• 2" (5cm) ball coupler is standard
MACHINE DIMENSIONS
SAFETY
• Safety chains
• 12 volt tail lights standard
• Meets NATM Certification
PARTS & ACCESSORIES
• Shredder Knives Kit (P/N: 77613-00)
888.625.4520
15
CHIPPERS
4" (10cm) CAPACITY CHIPPER
Model: CH4400
ENGINE
• Max torque: 20 ft-lbs. achieved at 2,400 rpm
operates at 3,800 rpm
• Trailer is made of 7 gauge steel
• Subaru EX 404cc
FUEL CAPACITY
• 7 gauge steel throughout housing with welded
construction
• Tongue is 2" x 2" (5cm x 5 cm) with 11 gauge wall thickness
• 1.85 gal. (7 liters)
14" (35.6cm) DIAMETER CANTILEVER ROTOR
• 14" (35.6cm) diameter by 1" (2.5cm) thick rotor
HIGHWAY TOWABLE
• 43" (109cm) tread width (center to center) and
4.80-8 tires with 1,000 lb. (454kg) torsion axle
suspension enables the chipper to be easily towed
down the highway
• 12 volt safety and directional lighting and tow chains are standard
• 1.25" (3.2cm) diameter rotor shaft
TWO CHIPPING BLADES
TOWING WEIGHT
• 536 lbs. (243kg)
• Blade Dimensions: 5" x 4" x .5"
(12.7cm x 10.2cm x 1.3cm)
HITCH
BEARINGS
MACHINE DIMENSIONS
• Two 1.25" (3.2cm) greasable bearings with
two bolt cast flanges
BELT DRIVE
SAFETY
• Double-banded belt drive with manual belt engagement
• Safety chains
ANVIL/CUTTER BAR
• Four-sided adjustable to insure good chipping ability
• 5" long x 1.75" wide x .375" thick
(12.7cm x 4.4cm x .95cm)
FEED CHUTE
•Opening 13" x 15" (33cm x 38cm), 38" (96.5cm)
off the ground
PARTS & ACCESSORIES
• Blade Kit (P/N: 76295-00)
• Optional Discharge Chute
4.5" x 4.5" (11.4cm x 11.4cm) (P/N: 74634-00)
• Tach/Hour Meter Kit - Gas (P/N: 31605-00)
• Feed throat opening is 5" x 5" (12.7cm x 12.7cm)
• Maximum feed size of up to 4" (10cm)
• Standard Discharge
4.5" x 9" (11.4cm x 22.9cm) and discharges towards the
ground, from a height of 14" (36cm)
• Optional Discharge
4.5" x 4.5" (11.4cm x 11.4cm) square discharge with adjustable deflector, discharges at a height of 55" (140cm)
16
CHIPPERS
5" (13cm) CAPACITY CHIPPER
Model: CH5653
ENGINE
• Subaru EH engine 653cc
• .25" (6.35cm) steel housing with welded
construction
• Trailer is made of 7 gauge steel
FUEL CAPACITY
• Tongue is 2" x 2" (5cm x 5 cm) with .25" (6.35mm)
wall thickness
20" (51cm) DIAMETER ROTOR
HIGHWAY TOWABLE
• 20" (51cm) diameter by 1.25" (3.2cm) thick rotor
•44" (112cm) tread width (center to center) and 5.30-12
tires with 1,000 lb. (454kg) torsion axle suspension enables the chipper to be easily towed down the highway
• 12 volt safety and directional lighting and tow chains are standard
• Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy service
FOUR CHIPPING BLADES
TOWING WEIGHT
• 950 lbs. (431kg)
HITCH
• Four reversible heat-treated steel chipper blades
• Blade Dimensions: 3.1" x 2" x .25" (7.9cm x 5cm x .6cm)
MACHINE DIMENSIONS
BEARINGS
• Two 1.5" (3.8cm) greasable bearings with two bolt cast flanges
BELT DRIVE
ANVIL/CUTTER BAR
• Four-sided adjustable
• 5.6" long x 4" wide x .375" thick
(14.2cm x 10.2cm x .95cm)
SAFETY
• Safety chains
PARTS & ACCESSORIES
• Blade Kit (P/N: 72493)
FEED CHUTE
•Opening 27" x 28" (68.6cm x 71.1cm)
43.8" (111cm) off the ground
• Feed throat opening is 5.5" x 7" (14cm x 17.8cm)
• Maximum feed size of up to 5" (12.7cm)
•With a 360° rotatable, 6" (15.2cm) diameter steel tubing
with adjustable spout cap allows you to put the chips where
you want them the first time
• Discharge height is 95" (2.4m)
888.625.4520
17
CHIPPERS
6" (15cm) CAPACITY CANTILEVER CHIPPERS -
1 of 2
ENGINES
CH611DH
• Kubota 1.1 Liter Diesel, 69 cu in. (1.1 liter)
•Max torque: 54.2 ft-lbs. achieved at 2,200 rpm
•Operates at 3,220 rpm
CH6720H
• Subaru EH 720cc
• Max torque: 39.5 ft-lbs. (53.6 N-m) achieved at 2,500
rpm
•Operates at 3,600 rpm at full throttle
FUEL CAPACITY/CONSUMPTION
•Fuel consumption on the Subaru 720cc is estimated at 1.8
gal. (6.8 liters) per hour at full load
•Fuel consumption on the Kubota 1.1 L is estimated at
1.7 gal. (6.44 liters) per hour at full load
•26" (66cm) diameter by 1" (2.5cm) thick rotor
• Weighs 165 lbs. (75kg)
• Rotates at 1,780 rpm (CH611DH)
• Rotates at 1,650 rpm (CH6720H)
• Easily accessible through the hinged cover, when
open it exposes one half of the rotor for easy access to the chipping blades and makes for easy service
HYDRAULIC FEED SYSTEM
• Steel hydraulic reservoir, 4 gal. (15 liters) capacity on
CH611DH and a Nylon hydraulic reservoir, 3 gal.
(11.5 liters) capacity on the CH6720H
• Self-contained hydraulic feed system allows you to evenly
feed limbs into the chipper
• Variable feed rate on the CH611DH (available as
an accessory on the CH6720H) with load sensing
2-stage pump
• Feed rate 0-150 fpm (0-46 m/min)
Average 100 fpm (30 m/min)
• Self-contained system with infinite speed settings,
dedicated neutral and full reverse, pump output
6.6 GPM (25 LPM) and 4hp with maximum
pressure and maximum flow, however
this is rarely required
• Feed system operates under 2,500 psi
• Single 15" (38cm) diameter top feed roller
• 2-stage pump
PLUS+1® ELECTRONIC CONTROLLER
• Smart feed with automatic “try again” feature
• Maximizes chipping efficiency
• Minimizes fuel consumption
• Provides an Amber code that alerts the operator every
15 hours to inspect chipping blades
FEED CHUTE
• Opening 33" x 37" (84cm x 94cm) tray 30"
(76.2cm) off the ground
• Feed throat opening is 6.5" x 13" (16.5cm x 33cm)
•Four reversible heat-treated steel chipper blades
• 90° feed angle
(12.7cm x 10.2cm x 1.3cm)
• Maximum feed size of up to 6" (15.2cm)
BEARINGS
• Two 1.75" (4.5cm) greasable bearings with four bolt cast
flanges
BELT DRIVE
• Triple-banded belt drive with manual belt engagement
ANVIL/CUTTER BAR
CH6720H
tubing with adjustable spout cap
CH611DH
• With a 360° rotatable, 6.7" (17cm) square steel chute with
screw-type adjustable spout cap
• Four-sided adjustable anvil to insure good chipping ability
• 6" long x 4" wide x .625" thick (16.5cm x 10.2cm x 1.6cm)
18
CHIPPERS
6" (15cm) CAPACITY CANTILEVER CHIPPERS -
2 of 2
ADJUSTABLE TONGUE JACK
• Feed table is 10 gauge steel on the CH6720H and
7 gauge steel on the CH611DH
•Adjustable jack allows one person to easily maneuver
the chipper around and hook up to a vehicle
• Tongue is 3" x 3" (7.6cm x 7.6 cm) with 11 gauge wall
thickness
MACHINE DIMENSIONS
• .25" (6.35cm) housing with welded construction
HIGHWAY TOWABLE
CH6720H
P205-75R14 tires with 1,800 lb (816kg) torsion axle
suspension
CH611DH
•50" (127cm) tread width (center to center) and
P215-75R15 tires with 2,500 lb. (1030kg) torsion axle
suspension
• Roller wheel with 850 lbs. (385kg) rating
CH611DH
CH6720H
SAFETY
• Safety chains
TOWING WEIGHT
• CH611DH – 2,300 lbs. (1,043kg)
• CH6720H – 1,656 lbs. (751.15kg)
HITCH
• Height adjustable coupler has 3 positions in
2" (5cm)
•CH611DH has a telescoping tongue length may be
adjusted up to 18" (45cm)
PARTS & ACCESSORIES
• Blade Kit (P/N: 76293-00)
• 2 5/16" Coupler (P/N: 14519-00)
• Pintle Hitch (P/N: 14900-00)
• Spare Tire Kit (CH611DH)(P/N: 75291-00)
• Knee Bar (P/N: 76945-00)
• Adjustable Feed Speed Sensor Kit (P/N: 76820-00)
• Optional Engine Guard Plate (P/N: 70135-00)
Optional CH6720H Engine Guard Plate
CH6720H shown
888.625.4520
19
CHIPPERS
8" (20cm) CAPACITY TURNTABLE CHIPPERS -
1 of 2
ENGINES
CH8720iH
• EFI Subaru EH 720cc, Fuel injected
•Max torque: 38.5 ft-lbs at 2,800 rpm
CH8993H
• Briggs & Stratton Vanguard 993cc
• Max torque: 52.4 ft-lbs at 2,350 rpm
(12.7cm x 10.2cm x 1.3cm)
BEARINGS
• Two 1.75" (4.5cm) greasable bearings with 4 bolt cast flanges
BELT DRIVE
• 9 gal (34.1 liters)
• Fuel consumption on the Briggs & Stratton 993cc is
estimated at 3 gal. (11.3 liters) per hour at full load
• Fuel consumption on the EFI Subaru EH 720cc is
estimated at 1.5 gal (5.7 liters) per hour at full load
ANVIL/CUTTER BAR
• 9" long x 4" wide x .625" thick
(22.9cm x 8.9cm x 1.6cm)
• Steel hydraulic reservoir, 3 gal. (11.5 liters) capacity
• Variable feed rate with load sensing 2-stage pump
• Easily accessible through the hinged cover, when open
it exposes one half of the rotor for easy access to the chipping blades and makes for easy service
• Self-contained system with infinite speed settings,
dedicated neutral and full reverse, pump output 6.6 GPM
(25 LPM) and 4hp with maximum pressure and maximum
flow, however this is rarely required
• 2-stage pump
20
CHIPPERS
8" (20cm) CAPACITY TURNTABLE CHIPPERS
2 of 2
• Adjustable jack allows one person to easily maneuver
• Provides an Amber code that alerts the operator every 15
hours to change chipping blades
MACHINE DIMENSIONS
FEED CHUTE
• Roller wheel with 850 lb. (385kg) rating
• Opening 30" x 31" (76cm x 79cm)
Tray 27" (68cm) off the ground
360° ROTATIONAL BED
• Feed throat opening is 9" x 9" (23cm x 23cm)
• Brake for locking bed in place. With drop pin for positive
transport lock
• 90° Feed Angle
• With a 360° rotatable, 8" (20cm) diameter steel tubing with adjustable spout cap allows you to put
the chips where you want them the first time
• Bed can rotate 360° for ease of feeding from any direction
• Keeps work crews out of the street
SAFETY
• Safety chains
PARTS & ACCESSORIES
• .25" (6.35cm) steel on the rest of the housing
• 2 5/16" Coupler (P/N: 14519-00)
• Frame is 2.5" x 2.5" (5cm x 5cm) 7 gauge steel tubing
• Feed table is 10 gauge steel
• Low Profile Discharge Chute Kit (P/N: 74581-00)
• Tongue is 3" x 3" (7.6cm x 7.6cm) with .25" (6.35mm) wall thickness
• Knee Bar Safety Kit (P/N: 76195-00)
• .375" (.95cm) steel face plate on the rotor housing
• Blade Kit (P/N: 76293-00)
HIGHWAY TOWABLE
P215-75R15 tires with 3,000 lb (1360kg) torsion axle
suspension enables the chipper to be easily towed down
the highway
TOWING WEIGHT
• CH8720iH – 2,225 lbs. (1,009kg)
• CH8993H – 2,350 lbs. (1,066kg)
HITCH
• Height adjustable coupler. Has 3 positions in
2" (5cm) increments
TELESCOPING TONGUE
• Adjustable length and height. The length may be adjusted up to 18" (45cm)
888.625.4520
21
CHIPPERS
9" (23cm) CAPACITY -
1 of 2
ENGINES
• Kubota 1.1 Liter Diesel, 69 cu in. (1.1 liter)
CH911DH
• Max torque: 54.2 ft-lbs. achieved at 2,200 rpm
• Operates at 3,220 rpm
CH922DH
• Kubota 2.2 Liter Diesel 134 cu in. (2.2 liter)
• Max torque: 108.4 ft-lbs. achieved at 1,800 rpm
• Operates at 3,020 rpm
• Steel hydraulic reservoir, 3 gal. (11.5 liters) capacity
• Self-contained system with infinite speed settings, dedicated neutral and full reverse, pump output 6.6 GPM (25
LPM) and 4 hp with maximum pressure and maximum
flow, however this is rarely required
• 18 gal (68 liters)
• Fuel consumption on the 1.1 Liter Diesel Kubota is
estimated at 1.7 gal. (7.57 liters) per hour at full load
• 2-stage pump
• Fuel consumption on the 2.2 Liter Diesel Kubota is
estimated at 3 gal. (14.2 liters) per hour at full load
• Easily accessible through the hinged cover, when
open it exposes one half of the rotor for easy access to the chipping blades and makes for easy service
15 hours to change chipping blades
FEED CHUTE
• Opening 30" x 31" (76cm x 79cm)
• 90° Feed Angle
• Feed table is 38" (96.5cm) long
(12.7cm x 10.2cm x 1.3cm)
BEARINGS
• Two 1.75" (4.5cm) greasable bearings with four bolt cast flanges
BELT DRIVE
ANVIL/CUTTER BAR
(22.9cm x 10.1cm x 1.6cm)
22
• With a 360° rotatable, 8" (20cm) diameter steel tubing
with adjustable spout cap allows you to put the chips
where you want them the first time
• .375" (.95cm) steel face plate on the rotor
housing
• .25" (6.35mm) steel on the rest of the housing
• 4" (10cm) "C" Channel frame construction
HIGHWAY TOWABLE
P215-75R15 tires with 3000 lb (1360kg) torsion axle
suspension enables the chipper to be easily towed down
the highway
CHIPPERS
9" (23cm) CAPACITY -
2 of 2
TOWING WEIGHT
SAFETY
• CH922DH – 2,700 lbs. (1,225kg)
• Safety chains
• CH911DH – 2,480 lbs. (1,125kg)
TELESCOPING TONGUE
• Pintle hitch is standard with 2" (5cm) ball coupler available as an accessory
• Adjustable length and height. The length may be adjusted
up to 18" (45cm) with four pin settings on the pintle hitch
PARTS & ACCESSORIES
• Blade Kit (P/N: 76293-00)
• Electric Brake Kit (P/N: 72730)
• Roller wheel with 850 lbs. (385kg) rating
• 2 5/16" (5.9cm) Coupler (P/N: 14519-00)
• Adjustable jack allows one person to easily maneuver
MACHINE DIMENSIONS
888.625.4520
• Fine Chip Rotor Kit (P/N: 76775-00)
• Knee Bar Safety Kit (P/N: 76195-00)
• Hour Meter Kit - Diesel (P/N: 71921)
23
PTO MACHINES
Model: SC5540
PTO DRIVE
•One-Speed Blower Kit
(4-blade fan and 4" dia. discharge tube) (P/N: 70487)
•Recommend 25-45 hp (19-34kW) at the PTO
• Two-Speed Blower Kit
(8-blade fan and 6" dia. discharge tube) (P/N: 71110)
• V
acuum Hose Kit (8" dia. x 20') (P/N: 71125)
(requires P/N: 71110)
• Screen, Fine – .375" (.95cm) (P/N: 70703)
• Screen, Medium – .75" (2cm) (P/N: 70531)
• Screen, Standard – 1.5" (3.8cm) (P/N: 70332)
• 19" diameter
• Screen, Wet Debris (P/N: 70559)
•540 rpm input
CHIPPER BLADES & SHREDDING KNIVES
(7.9cm x 5cm x .64cm)
• 36 Reversible Shredding Knives
BEARINGS
• Two 1.5" (3.8cm) greasable bearings with two bolt cast
flanges
BELT DRIVE
• Double-banded belt drive, serial # E01244 to current
• Two single belts, serial # E01243 and earlier
FEED CHUTES
• Maximum shredder capacity up to .75" (2cm)
• 7 gauge steel chipper/shredder housing
• .75" (1.9cm) steel flywheel
•Discharge screen is .25" (6.35mm) steel
MACHINE DIMENSIONS
• Weight: 450 lbs. (204.1 kg)
SAFETY
PARTS & ACCESSORIES
• Shredder Knives Kit (P/N: 70972)
24
PTO MACHINES
5" (13cm) CAPACITY CHIPPER/SHREDDER/BLOWER
Model: SC5540B
POWER SOURCE
•540 rpm input
SAFETY
PARTS & ACCESSORIES
•Chipper Blade Kit (P/N: 72493)
•Shredder Knives Kit (P/N: 70972)
• Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out
• 20.6" (52.3cm) diameter
CHIPPER BLADES & SHREDDING KNIVES
(7.9cm x 5cm x .64cm)
• 36 Reversible Shredding Knives
BEARINGS
• Two 1.5" (3.8cm) greasable bearings with two bolt cast
flanges
BELT DRIVE
• Double-banded belt drive
FEED CHUTES
• Shredder hopper is 13" x 20" (33cm x 51cm)
CHIPPER/
SHREDDER/
BLOWER
•With a 360° rotatable, 6" (15.25cm) diameter steel
tubing with adjustable discharge
UNIQUE SCREENLESS SHREDDER
•Unique product, self-feed chipper/shredder without a
screen
•7 gauge reinforced steel bed
MACHINE DIMENSIONS
•Weight: 720 lbs. (326kg)
888.625.4520
25
PTO MACHINES
4.5" (11cm) CAPACITY CANTILEVER CHIPPER
Model: CH45540
PTO DRIVE
• 540 rpm input
FEED CHUTE
• Opening 13" x 14.5" (33cm x 36.8cm), 39" (99cm)
off the ground
14" (35.6cm) DIAMETER ROTOR
• Maximum feed size of up to 4.5" (11.4cm)
• Feed throat opening is 4.5" x 5" (11.4cm x 12.7cm)
• 14" (35.6cm) diameter by 1" (2.5cm) thick rotor
CHIPPER BLADES
• Standard discharge is 4.5" x 4.5" (11.4cm x 11.4cm)
and discharges towards the ground, from a height of
14.9" (38cm)
• Optional Discharge is 4.5" x 4.5" (11.4cm x 11.4cm) discharges with adjustable deflector at a height of
55" (140cm)
(12.7cm x 10.2cm x 1.3cm)
BEARINGS
• Two 1.25" (3.2cm) greasable bearings with two bolt cast flanges
BELT DRIVE
• 7 gauge steel throughout housing with welded construction
3-POINT HITCH
• Category 1
• Chipper weight is 361 lbs. (164kg)
MACHINE DIMENSIONS
ANVIL/CUTTER BAR
SAFETY
(14.2cm x 10.2cm x .95cm)
PARTS & ACCESSORIES
• Blade Kit (P/N: 76295-00)
• Optional Discharge Chute 4.5" x 4.5" (11.4cm x 11.4cm)
(P/N: 74634-00)
26
PTO MACHINES
5" (13cm) CAPACITY
Models: CH5540 & CH5540H
PTO DRIVE
ANVIL/CUTTER BAR
• Recommend 25-45 hp (19-34kW) at the PTO
(14.2cm x 10.2cm x .95cm)
• 540 rpm input
• Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out
CHIPPER BLADES
BEARINGS
• Two 1.5" (3.8cm) greasable bearings with two bolt cast flanges.
BELT DRIVE
HYDRAULIC FEED SYSTEM (CH5540H)
• Maximum capacity of 3 gal. (11.36 LPM) at
2,500 psi
• Electric/Hydraulic System to control feed roller direction
• 2-stage hydraulic pump
FEED CHUTE
• Opening 28" x 28" (71cm x 71cm)
• Feed throat opening is 5.5" x 7.5" (14cm x 19cm)
• Maximum feed size of 5" (13cm)
tubing with adjustable spout cap allows you to put the
chips where you want them the first time
• .25" (6.35mm) steel throughout housing with welded construction
CATEGORY 1 3-POINT HITCH
• CH5540 - Weight is 600 lbs. (272kg)
• CH5540H - Weight is 980 lbs. (445kg)
MACHINE DIMENSIONS
• CH5540 – LxWxH 50" x 45" x 90"
(127cm x 114cm x 229cm)
• CH5540H – LxWxH 68" x 49" x 90"
(173cm x 124cm x 229cm)
SAFETY
PARTS & ACCESSORIES
• Blade Kit (P/N: 72493)
• Auto Feed Kit - CH5540H (P/N: 73071)
888.625.4520
27
PTO MACHINES
8" (20cm) CAPACITY
Model: CH8540
PTO DRIVE
• 540 rpm input
BEARINGS
• Recommend 35hp to 60hp (26kW-45kW) at the PTO
• Two 1.75" (4.5cm) greasable bearings with 4 bolt cast flanges
BELT DRIVE
• Triple-banded belt drive
ANVIL/CUTTER BAR
• Four-sided adjustable anvil
(22.9cm x 10.2cm x 1.6cm)
• Easily accessible through the hinged cover, when opened,
it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out
FEED CHUTE
CHIPPER BLADES
(12.7cm x 10.2cm x 1.3cm)
• Opening 30" x 31" (76cm x 79cm)
46.5" (118cm) off the ground
• With a 360° rotatable, 8" (20cm) diameter steel tubing
with adjustable spout cap allows you to put the chips where
you want them the first time
• .25" (6.35mm) steel on the wrap around with welded construction
• Frame is 2" x 2" (5cm x 5cm), 7 gauge steel
3-POINT HITCH
• Category 1
MACHINE DIMENSIONS
• Weight: 886 lbs. (402kg)
SAFETY
PARTS & ACCESSORIES
• Blade Kit (P/N: 76293-00)
28
PTO MACHINES
9" (23cm) CAPACITY
1 of 2
PTO DRIVE
• 540 rpm input
BEARINGS
• Recommend 35hp to 60hp (26kW-45kW) at the PTO
• Two 1.75" (4.5cm) greasable bearings with 4 bolt cast
flanges
30" (76CM) DIAMETER ROTOR
BELT DRIVE
• Easily accessible through the hinged cover, when open it
exposes one half of the rotor for easy access to
the chipping blades and makes for easy service
CHIPPER BLADES
CH9540H
(12.7cm x 10.2cm x 1.3cm)
CHF9540H
• 16 reversible heat-treated steel chipper blades
• Blades are spaced on the rotor to provide maximum coverage and produce an extremely small chip
• Triple-banded belt drive
ANVIL/CUTTER BAR
• Four-sided adjustable anvil
(22.9cm x 10.2cm x 1.6cm)
• Steel hydraulic reservoir, 3 gal. (11.5 liter) capacity
• Self-contained hydraulic feed system allows you to evenly feed limbs into the chipper
• Self-contained system with infinite speed settings, dedicated neutral and full reverse, pump output
6.6 GPM (25 LPM) and 4Hp with maximum pressure and
maximum flow, however this is rarely required
• 2-stage hydraulic pump
888.625.4520
29
PTO MACHINES
9" (23cm) CAPACITY
2 of 2
• Smart feed with automatic “try again” feature to clear jams
• Maximizes chipping efficiency and manpower
15 hours to inspect chipping blades
FEED CHUTE
• Opening 30" x 31" (76cm x 79cm)
• 90° feed angle
CH9540H
• 360° rotatable, 8" (20cm) diameter steel
tubing with adjustable spout cap discharges from a height
of 93" (236cm)
3-POINT HITCH
• Category 1
• Chipper weight is 1,300 lbs. (590kg)
MACHINE DIMENSIONS
CH9540H
CHF9540H
SAFETY
PARTS & ACCESSORIES
• Blade Kit for model CH9540H (P/N: 76293-00)
• Blade Kit for model CHF9540H (P/N: 74830-00)
• Fine Chip Rotor Kit (P/N: 76775-00)
CHF9540H
• 6" (15cm) diameter square discharge. Discharges toward
the ground from a height of 34" (86cm)
• .25" (6.35mm) steel on the rest of the housing
• Frame is 2" x 2" (5cm x 5cm), 7 gauge steel
30
SKID STEER CHIPPERS
4.5" (13cm) TO 8" (20cm) CAPACITY
Models: CH450H, CH500H & CH800H
HYDRAULIC FLOW REQUIREMENTS
• CH450H (designed for mini track or skid steer loaders)
Minimum: 11 gpm - Maximum: 15 gpm
(CH450H requires a Bob-Tach mounting
adapter for Bobcat models.)
•CH500H
•CH800H
• CH500H and CH800H have two mount locations
Chipper can be mounted with feed chute facing
forward or curb side.
CHIPPER ROTOR
CH450H - Cantilever
•
•
•
•
•
14" (35.6cm) diameter by 1" (2.5cm) thick rotor
Weighs 49 lbs. (22.2kg)
Machine balanced
Rotates at 2,700 rpm at 11 gpm – 3,700 rpm at 15 gpm
1.25" (3.2cm) diameter rotor shaft
ANVIL/CUTTER BAR
HYDRAULIC FEED (CH500H AND CH800H)
• Four position manual valve control
(Reverse - Neutral - Forward - Reverse)
• Infinite speed settings with turn of a handle
FEED CHUTES
CH450H
• 4.5" x 4.5" (11.4cm x 11.4cm) chipper opening for side limbs. Maximum feed size of 4.5" (11.4cm)
CH500H
• 5.5" x 7" (14cm x 18cm) chipper opening for side limbs. Maximum feed size of 5" (12.7cm)
H800H
C
• 9" x 9" (23cm x 23cm) chipper opening for side limbs. Maximum feed size of 8" (20cm)
CH500H
• The CH450H's standard discharge is 4.5" x 9" (11.4cm x
22.9cm) and discharges towards the ground, from a height
of 10.5" (.27m)
•
•
•
•
•
• The CH500H and the CH800H have a 360° rotating, 6"
(15cm) (CH500H) or 8" (20cm) (CH800H) diameter steel
tubing with adjustable deflector cap thich allows you to put
the chips where you want them the first time. These two
models also discharge at a height of 93" (2.36m)
20" (51cm) diameter by 1.25" (3.2cm) thick rotor
Weighs 140 lbs. (63.5kg)
Machine balanced
Rotates at 2,700 rpm at 15 gpm – 4,000 rpm at 22 gpm
1.5" (3.8cm) diameter rotor shaft
CH800H
• Rotates at 1,600 rpm at 25 gpm – 2,500 rpm at 38 gpm
CHIPPING BLADES
• Reversible heat-treated chipper steel blades
• CH450H has two blades
MACHINE DIMENSIONS & WEIGHTS
CH450H
• 41" x 28" x 40" (104cm x 71cm x 102cm)
286 lbs. (129.7kg)
CH500H
• 73" x 53" x 93" (185cm x 135cm x 236cm)
1,145 lbs. (520kg)
CH800H
• 74" x 60" x 88" (188cm x 152cm x 234cm)
1,525 lbs. (693kg)
• CH500H and CH800H have four blades
• CH450 & CH800H - LxWxH – 5" x 4" x .5"
(12.7cm x 10.2cm x 1.3cm)
SAFETY
• CH500H - LxWxH – 3.125" x 2" x .25" (7.9cm x 5cm x .6cm)
BEARINGS
• Optional Discharge Chute 4.5" x 4.5" (11.4cm x 11.4cm)
(P/N: 74634-00)
• CH450H - Two 1.25" (3.2cm) greasable bearings with two bolt cast flanges
CH450H
• Chipper Blade Kit (P/N 76295-00)
• CH500H - Two 1.5" (3.8cm) greasable bearings with two bolt cast flanges
CH500H
• CH800H - Two 1.75" (4.5cm) greasable bearings with four bolt cast flanges
CH800H (Serial #804670 & up)
• Chipper Blade Kit (P/N: 76293-00)
888.625.4520
PARTS & ACCESSORIES
31
LOG SPLITTERS
Models: LS22 & LS27
ENGINES
TRANSPORT
• LS27 – Subaru SP 210cc
• Weight distributed evenly
• LS22 – Subaru SP 170cc
FUEL CAPACITY
• LS22 – .95 gal. (3.6 liters)
• LS27 – .95 gal. (3.6 liters)
TONNAGE/FORCE
• LS22 – up to 22 tons of splitting force
• LS27 – up to 27 tons of splitting force
CYLINDER
• LS22 – 4" (10cm) diameter
• LS27 – 4.5" (11cm) diameter
OPERATING POSITIONS
• Horizontal and vertical
• 4.8-8 (12cm x 20cm) wheels
• 2" (5cm) Ball Coupler
• Lights and fenders are available as an accessory
• Maximum Tow Speed – 45 mph (72 Km/h)
SAFETY
PARTS & ACCESSORIES
• Log Splitter Valve Seal Kit (P/N: 77622-00)
• Log Splitter Cradle Kit (P/N: 77189-00)
• Fenders & Tail Light Kit (P/N: 77510-00)
• 4-Way Wedge Kit (P/N: 77514-00) (Only for use on LS21,
LS22 & LS27 models, serial # C01077 thru F01052)
• Tach/Hour Meter Kit (P/N: 31605-00)
CYCLE TIMES
• LS22 – 12 Seconds
• LS27 – 14 Seconds
HYDRAULICS
• LS22 – 4 gal. (15 liters) system
with a 2-stage 14 gpm (53 liters) pump
• LS27 – 4.5 gal. (17 liters) system with a two-stage
14 gpm pump
MAXIMUM LOG LENGTH
• 24" (61cm)
CAST IRON WEDGE
• Overall LxWxH – 6.25" x 8.25" x 8"
(16cm x 21cm x 20cm)
• Splitting surface LxWxH – 5" x 5.75" x 7.75"
(12.7cm x 14.6cm x 19.7cm)
MACHINE DIMENSIONS & WEIGHTS
• LS22 – 450 lbs. (204kg)
• LS27 – 455 lbs. (206.1kg)
BEAM
• Wide end plate for greater stability in the vertical
position
• Bed Height - 30" (76cm) from ground
32
WHEELED TRIMMERS
WT189
• Subaru EA190V, 189cc
WEIGHTS
WT189 - 84 lbs. (38.1kg)
WT190 - 77 lbs. (35kg)
WT190T - 77 lbs. (35kg)
WT190S - 82 lbs. (37.2kg)
• Briggs & Stratton Quantum 190cc
• • • • FUEL CAPACITY
SOUND LEVELS
• WT189 - .25 gal. (.95 liter)
• WT190's - .25 gal. (.95 liter)
• The average dB rating at the operator is 92 dB pressure
and 99 dB power level.
TRIMMER DISC PLATE DESIGN
SELF-PROPELLED
WT190's
• Made of steel, not aluminum or plastic
• Easy line replacement design
TRIMMER SHAFT & MOW BALL
•
•
•
•
.75" (1.9cm) steel trim head shaft
Cast iron mow ball
Single belt driven cutting head
2.25" collared anti-wrap collar design
ADJUSTABLE CUTTING HEIGHT
• Trimmer disc can be reversed providing two different cutting heights
TRIMMER LINE
•
•
•
•
.155 mil round line standard
.130 mil line optional
Ten 21" (52cm) pieces of round .155 mil included
.155 & .175 mil CrossFire line available
• Model WT190S self-propelled with 3 speed transmission
• Speeds for 3-speed transmission are 1 to 3 mph.
• No off-set or tilt features on this model.
SAFETY
FEATURES
• .155 mil line standard with .130 & .175 mil lines available. .75" Steel Trim Head Shaft and 5/8" Solid Steel Axle.
Enclosed undercarriage to keep debris from getting in. Three
different handle bar height settings for operator convenience.
Padded foam gripped handlebar.
• “Off Center Trim" moves body over 13° for straight trimming
while reaching outside the wheel base. This function allows
for trimming along fences, foundations, barrier walls and
other long, sensative trim areas.
OFF-SET TRIM (WT189 & WT190)
• Body of trimmer can be pivoted to the left 13° or 4"
(10.2 cm) at the nose, to reach beyond the wheel base.
Standard Wrapping Method
TILT (WT190T)
• Three settings, 5°, 10° and 13°
• Trim and edge along fences, barriers, foundations,
walls and other obstructions
Optional Wrapping Method 1
Optional Wrapping Method 2
BUILT TO LAST
• 12 gauge steel frame & cutting head
• Enclosed housing keeps debris out
• 5/8" Solid steel axle
CUTTING SWATH
• Cutting swath is 24" (61cm), while machine is only
21" (53cm) from the outer edges of tires
WHEELS
• WT189 & WT190 - 14" (35.6cm) w/sealed ball bearings
• WT190T & WT190S - 15" (38.1cm) w/sealed ball bearings
ADJUSTABLE HANDLE BAR
• Three settings for ergonomic operation
WT189 & WT190, 13 degree off-set trim
888.625.4520
33
WHEELED TRIMMERS
14" Sabre Tooth Blade
Saplings up to 4" (10cm) in diameter
P/N: 74548-00
14" Triple Blade Brush Cutter
P/N: 32086-00
.155" diameter 10 Pack
20" pre-cut length, P/N: 32029-00
.175" diameter 10 pack
75' Donut
P/N: 32033-00
3lb. Spool
P/N: 32035-00
.155" diameter line
Round, 10 pk.
P/N: 72780
Round, 1 lb. donut
P/N: 12390
Square, 10 pk.
P/N: 72779
Square, 1 lb. donut
P/N: 12391
.155" diameter Round
10 Pack
Nylon Blade Kit
P/N: 73060
Cast Iron Mow Ball P/N: 31767-12
Proline Head
P/N: 74891-00
Heat-treated Steel Mow Ball
P/N: 72704-12
34
STUMP GRINDER
Model: SG340
ENGINE
ENGINE KILL SWITCH
• Honda GXV 340cc
• Safety feature to shut engine off if disengaged for
added safety
DOUBLE-BANDED BELT DRIVE SYSTEM
• Double-banded belt driving the cutter head for more
positive power transfer. Belt tension idler
• Reduces belt maintenance greatly
MACHINE DIMENSIONS
WEIGHT
• 195 lbs. (88kg)
CARBIDE TIPPED TEETH
• 12 carbide tipped teeth offer maximum cutting
performance. These teeth are locked into the cutter head
(8 curved, 4 straight teeth)
• The cutter head turns at 3,600 rpm with a speed at the
tips 8,460 ft/min (2578 m/min)
• A screen covered opening increases visibility to the
cutter head
SAFETY
PARTS
• 12 Blade C
utter Replacement Kit (P/N: 76292-00)
7" (17.8cm) DIAMETER CUTTER HEAD
• Large cutting diameter giving a smooth cut and can be
easily removed for quick and easy sharpening
• Cutter head at 15 degree angle
• Designed for use on stumps from 6" (15cm) above grade to
a maximum of 4" (10cm) below grade
DEBRIS FLAP
• Mounted to the stump grinder axle
LARGE ENCLOSED DRIVE SHAFT
• Prevents chips from building up in the belts and pulleys
• Large 1.5" (3.8cm) diameter drive shaft provides superior
reliability
16" (40.64cm) PNEUMATIC WHEELS
• Pneumatic tires 4.80-8 rim with ball bearing hub
SINGLE WHEEL BRAKE
• Allows the stump grinder to pivot and keep in position
while grinding effortlessly
Single Wheel Brake
888.625.4520
12 Blade Cutter
Replacement Kit
P/N: 76292-00
35
WHEELED VACUUMS
Models: WV160, WV160S, WV190 & WV190S
ENGINES
SAFETY
• WV190/WV190S – Briggs & Stratton
190cc Professional Series
PARTS & ACCESSORIES
• WV160/WV160S – Honda 160cc GCV
FAN ROTOR
• Hard Bottomed Debris Bag (P/N: 30217-00)
• 5-blade steel fan
• Caster Wheels Kit (P/N: 76967-00)
• .25" (6.35mm) Steel welded rotor construction
• 4" Diameter Hose Kit
(P/N: 73606-00)
ONE PIECE HOUSING
• Durable Nozzle Wear Plate
(P/N: 73640-00)
• Made with .20" (5mm) thick Linear Low Density
Polyurethane with a UV inhibitor
• Vacuum Wear Liner Kit (P/N: 76466-00)
• Easily removable adapter with bag
• Discharge opening 6" x 6.5" (15cm x 16.27cm)
• Intake width 27" (68.58cm)
SELF-PROPELLED
• Models WV160S and WV190S are self-propelled with three
variable speeds
• Self-propelled rear wheel drive provides more traction
• Ball bearing wheels for a smoother, easier ride
HANDLEBARS
• Four adjustable height settings
• Cushion Grip
BAG
• Large capacity, hard bottom, quick dump bag,
6-bushel capacity
• Dust reducing
• Heavy-duty, double stitched nylon zipper with
deflector flaps
• Adjustable hanger straps
ADJUSTABLE FRONT – FIVE HEIGHT SETTINGS
• .25" (.64cm) above ground, ground level set at factory
• 1.25" (3.2cm)
• 2.375" (6cm)
• 3.5" (9cm)
• 4.5" (14.5cm)
MACHINE DIMENSIONS
• 61" x 27" x 46" (155cm x 69cm x 117cm)
at maximum handle height
• WV160 – 108 lbs. (49kg)
• WV190 – 113 lbs. (51kg)
• WV160S – 121 lbs. (55kg)
• WV190S – 126 lbs. (57kg)
36
DEBRIS LOADERS
HITCH MOUNT DEBRIS LOADERS
Models: DL8, DL10
ENGINES
• DL8
Subaru EX 404cc with recoil start
• DL10
Briggs & Stratton Vanguard 570cc with electric start
FUEL CAPACITY
• DL8 - 1.85 gal. (7 liters)
• DL10 - 2.1 gal. (7.9 liters)
FAN AND HOUSING
• Wear liners made out of high strength steel
• 4-blade fan made of .375" (.9cm) steel
• Scrolled fan housing for more efficient transfer of air
• Direct drive
• One bolt access cover removal for easy fan clean out
DISCHARGE CHUTE
WEIGHTS
DL8
• 300 lbs. (136.1kg)
DL10
• 340 lbs. (154.2kg)
SAFETY
PARTS & ACCESSORIES
• Wear Liner Replacement Kit (P/N: 77398-00)
• 4' (1.2 m) Flexible Horizontal Chute Extension
(P/N: 74737-00)
• 16" (40.6cm) Vertical Chute Extension (P/N: 75888-00)
• 12 Volt Work Light Kit (P/N: 77105-00)
• Discharge Deflector Cap Kit (P/N: 77450-00)
• Receiver Bar Mount Kit (P/N: 77464-00)
• 360° Rotational 8" (20.3cm) discharge chute
BUILT TO LAST
• Heavy-duty hose swivel boom
• Light-weight aluminum handle
• 8" (20.3cm) diameter 12' (3.6m) long flex hose
(model DL8390)
(model DL10570)
CFMS
• DL8 – 3500
• DL10 – 3900
MACHINE DIMENSIONS
DL8
• LxWxH – 27" x 29" x 57"
(69cm x 74cm x 145cm)
DL10
• LxWxH – 27" x 30" x 57"
(69cm x 76cm x 145cm)
DL8 shown
888.625.4520
37
DEBRIS LOADERS
SKID MOUNT DEBRIS LOADERS
Model: DL12653, DL12720
ENGINES
DL12653
• Subaru EH 653cc with electric start
DL12720
• Subaru EH 720cc with electric start
FUEL CAPACITY
• 9 gal. (34.1 liters) polyethylene tank
SAFETY
PARTS & ACCESSORIES
• Flexible Hose 12" x 12' (30.5cm x 3.7m) (P/N: 12778)
• Wear Liner Replacement Kit (P/N: 77073-00)
• 16" (40.6 cm) Vertical Chute Extension
(P/N: 75888-00)
FAN AND HOUSING
• 4' (1.2 m) Flexible Horizontal Chute Extension
(P/N: 74737-00)
• Wear liners made out of special high strength steel
• Universal Road Towable Trailer Kit (P/N: 77041-00)
• 4-blade fan made out of .375" (9.5mm) steel
• 12 Volt Work Light Kit (P/N: 77105-00)
• Scrolled fan housing for more efficient transfer of air
DRIVE
DL12653
• Direct drive
DL12720
DISCHARGE CHUTE
• 360° rotational 8" (20cm)
BUILT TO LAST
• Heavy-duty swivel boom with hose storage
• Lightweight aluminum handle
• One bolt access cover removal for easy fan clean out
MACHINE DIMENSIONS
DL12653
DL12720
WEIGHTS
DL12653
• 595 lbs. (269.9 kg)
DL12720
• 675 lbs. (306.2 kg)
CFMS
12" model shown mounted on optional trailer kit
• DL12653 – 5100
• DL12720 – 5100
38
ECHO BEAR CAT GEAR
REUSABLE V INYL
E ARPLUGS W ITH CASE
The handy carrying case can be worn on your belt
when not in use. Cleanup is easy with just warm
water. CE and OSHA approved.
P/N: 31539-00
E AR MUFFS
These light-weight ear
muffs have an NRR of
29 dB(A) when used
as directed and meet
CE standard 3.19.
P/N: 36775-00
CE EN352-1:2002
SAFET Y GL ASSES
HELMET SYSTEM
Lightweight and impact resistant. Hard-coated opticalgrade, abrasion resistant lenses. Polycarbonate lenses
offer 99.9% protection from the most intense UV rays.
Includes
helmet, mesh
face visor and
ear protection.
P/N: 36776-00
Tech Glasses
P/N: 36773-00
Zone II Glasses
P/N: 36774-00
PREMIUM SAFET Y
VEST
Highly visible vest features
5-point tear away
panels for safety.
P/N: 36777-00 (large)
P/N: 36778-00 (xlarge)
P/N: 36779-00 (xxlarge)
ISEA 107-2004
888.625.4520
CE EN397:1995 CLASS EG & C
CE EN1663B
CE EN352-3:1997
V IBR AT ION-REDUCING
SPOR T/L ANDSCAPE GLOVES
Premium, padded-leatherpalm gloves help reduce
vibration. Also feature form
fitting fingers and
Velcro® -type wrist
band for tight fit.
P/N: 31299-00 (large)
P/N: 31300-00 (xlarge)
39
WARRANTY COVERAGE
CURRENT MODELS
1 of 2
U.S. and Canada
PRODUCT
ECHO BEAR CAT WARRANTY
CHIPPER/SHREDDERS
MODEL
ENGINE
SC2170
COMMERCIAL
RENTAL
Subaru 170cc
N/A
N/A
SC3206
Briggs & Stratton 205cc
N/A
N/A
SC3265
Subaru 265cc
SC3306
SC3306E
SC3342
SC5540
SC5540B
SC5720B
CONSUMER
3 years
PARTS
LABOR
YES
YES
1 year
6 months
CONSUMER
COMMERCIAL
RENTAL
PARTS
LABOR
3 years
1 year
6 months
YES
YES
N/A
Subaru 720cc
CHIPPERS
MODEL
ENGINE
CH4400
Subaru 404cc
CH45540
CH5540
CH5540H
N/A
CH500H
CH800H
CH5653
Subaru 653cc
CH611DH
Kubota 1.1 L
CH6720H
Subaru 720cc
CH8720iH
Subaru 720cc
CH8993H
CH8540
CH9540H
N/A
CHF9540H
CH911DH
Kubota 1.1 L
CH922DH
Kubota 2.2 L
WHEELED TRIMMERS
MODEL
ENGINE
WT189
Subaru 189cc
WT190
WT190T
CONSUMER
COMMERCIAL
RENTAL
PARTS
LABOR
3 years
1 year
6 months
YES
YES
WT190S
40
WARRANTY COVERAGE
CURRENT MODELS
2 of 2
U.S. and Canada
PRODUCT
DEBRIS LOADERS
MODEL
ENGINE
DL8
Subaru 404cc
DL10
Briggs & Stratton 570cc (elec.
start)
DL12653
Subaru 653cc
DL12720
Subaru 720cc
CONSUMER
COMMERCIAL
RENTAL
PARTS
LABOR
3 years
1 year
6 months
YES
YES
STUMP GRINDERS
MODEL
ENGINE
CONSUMER
COMMERCIAL
RENTAL
PARTS
LABOR
SG340
Honda 340cc
3 years
1 year
6 months
YES
YES
MODEL
ENGINE
WHEELED VACUUMS
WV190
WV190S
WV160
WV160S
CONSUMER
COMMERCIAL
RENTAL
PARTS
LABOR
3 years
1 year
6 months
YES
YES
CONSUMER
COMMERCIAL
RENTAL
PARTS
LABOR
3 years
1 year
6 months
YES
YES
Honda 160cc
LOG SPLITTERS
MODEL
ENGINE
LS22
Subaru 170cc
LS27
Subaru 210cc
3 YEAR WARRANTY: Valid on any ECHO Bear Cat product purchased NEW.
“Consumer” defined as: complete unit for residential or non-income producing use.
“Commercial” defined as: complete unit for commercial, institutional, agricultural, horticultural or income producing use.
“Rental” defined as: complete unit for rental purposes to produce income.
*Models SC2170, SC2206 & SC3206 are classified as Consumer grade products and will not qualify for warranty coverage if used for
Commercial or Rental purposes.
ENGINE WARRANTY: For Engine Warranty information or service needs regarding the engine of your machine, record the serial
number of the engine and refer to the Engine Owners Manual for terms and conditions of the manufacturer or see your nearest
dealer.
888.625.4520
41
WARRANTY COVERAGE
CURRENT MODELS
1 of 2
PRODUCT
CHIPPER/SHREDDERS
MODEL
ENGINE
SC2170
COMMERCIAL
RENTAL
Subaru 170cc
N/A
N/A
SC3206
N/A
N/A
SC3265
Subaru 265cc
SC3306
SC3306E
SC3342
SC5540
SC5540B
SC5720B
CONSUMER
2 years
PARTS
LABOR
YES
YES
1 year
6 months
CONSUMER
COMMERCIAL
RENTAL
PARTS
LABOR
2 years
1 year
6 months
YES
YES
CONSUMER
COMMERCIAL
RENTAL
PARTS
LABOR
2 years
1 year
6 months
YES
YES
N/A
Subaru 720cc
CHIPPERS
MODEL
ENGINE
CH4400
Subaru 404cc
CH45540
CH5540
CH5540H
N/A
CH500H
CH800H
CH5653
Subaru 653cc
CH611DH
Kubota 1.1 L
CH6720H
Subaru 720cc
CH8720iH
Subaru 720cc
CH8993H
CH8540
CH9540H
N/A
CHF9540H
CH911DH
Kubota 1.1 L
CH922DH
Kubota 2.2 L
WHEELED TRIMMERS
MODEL
ENGINE
WT189
Subaru 189cc
WT190
WT190T
WT190S
42
WARRANTY COVERAGE
CURRENT MODELS
2 of 2
PRODUCT
DEBRIS LOADERS
MODEL
ENGINE
DL8
Subaru 404cc
DL10
Briggs & Stratton 570cc (elec.
start)
DL12653
Subaru 653cc
DL12720
Subaru 720cc
CONSUMER
COMMERCIAL
RENTAL
PARTS
LABOR
2 years
1 year
6 months
YES
YES
STUMP GRINDERS
MODEL
ENGINE
CONSUMER
COMMERCIAL
RENTAL
PARTS
LABOR
SG340
Honda 340cc
2 years
1 year
6 months
YES
YES
CONSUMER
COMMERCIAL
RENTAL
PARTS
LABOR
2 years
1 year
6 months
YES
YES
CONSUMER
COMMERCIAL
RENTAL
PARTS
LABOR
2 years
1 year
6 months
YES
YES
WHEELED VACUUMS
MODEL
WV190
WV190S
WV160
WV160S
ENGINE
Honda 160cc
LOG SPLITTERS
MODEL
ENGINE
LS22
Subaru 170cc
LS27
Subaru 210cc
NOTE:
“Consumer” defined as: complete unit for residential or non-income producing use.
“Commercial” defined as: complete unit for commercial, institutional, agricultural, horticultural or income producing use.
“Rental” defined as: complete unit for rental purposes to produce income.
*Models SC2170, SC2206 & SC3206 are classified as Consumer grade products and will not qualify for warranty coverage
if used for Commercial or Rental purposes.
ENGINE WARRANTY: For Engine Warranty information or service needs regarding the engine of your machine, record the serial
number of the engine and refer to the Engine Owners Manual for terms and conditions of the manufacturer or see your nearest
dealer.
888.625.4520
43
BELT REFERENCE GUIDE
Part Number
Models
Area Used
12106
Belt, 3V670 Kevlar
72085, 72285, 72385 (SN =>21300), 75011, 75111
12119
Belt, 2RB65
73525
Drive
12273
Belt, 3B90 Banded
CH922DH (74950)
Drive
12317
Belt, 4L 53
73040, 73050, 73450, 74040, 74450, 74455, 74050, 74060, 74065, 75065, 76065,
WT160, WT160T, WT189, WT190, WT190T
Drive
12365
Belt, 3VX530
73710, SG340 (73711)
Drive
12573
Belt, 3L x 52 Kevlar
73150, 73350, 73265, 73455, 75365, WT160S, WT190S, WT190SE
Drive
12660
Belt, 4L350
CH5540H (74554), 74624, 74520
Beater Bar
Hyd Feed
16000
Belt, BX-65
70500
Drive
16043
Belt, 29”
CH6720H, CH6730H, CH6670H (76624) & CH6993H (76635)(SN>603143),
Pump
16043
Belt, 29”
SC3206 (70050) (SN>105334), SC3342 (75311) (Single Belt Drive SN<C03478), SC3305
(70080), SC3270E (70085), SC3240 (78380), 70180, SC3305E, SC3306, SC3306E
Drive
16081
Belt, 27”
SC3206 (70050) (SN<105334)
Drive
16086
Belt, BX-49
70487
Drive
16347
Belt, 2B70 Banded
SC5614 (71020), 73413, 73420, 74520, 73120, 73125, 73725, 71014,
DL12670 (75124), DL12720
Drive
16500
Belt, VGates 6958
71110, 71125
Drive
16559
Belt, 3B83 Banded
CH8720iH, CH6614 (71620), CH6614H (72620), CH911DH (72928),
CH8670H (76824), CH8993H (76835), 71825, 72825, 74824,
Drive
16636
Belt, BX-43
CH9540H (72854), CHF9540H (76854)
Hyd Feed
16660
Belt, BX-38
CH911DH (72928) & CH922DH (74950)(VIN<5VJAA00118W000989),
CH6614 (72620), 72825, 74824, 72942,
Hyd Feed
16691
Belt, 3VX500
71755
Drive
16787
Belt, 3B85 Banded
72942
Drive
16799
Belt, 2R3VX475 EL COG
71785
Drive
16911
Belt, 3V560
72085, 72285, 72385, 75011, 75111
16912
Belt, 3V600
72085, 72285, 72385 (SN<21300)
17055
Belt, BX-56 [Qty 2]
CH5540 (73454), CH5540H (74554), SC5540 (SN<E01243), 70554, 70520
Drive
17558
Belt, 4L-38
70251, 70252
Drive
Belts, 29” (Matched set)
SC3265, SC3240 (70380), SC3240T (70580), 70385,
SC3342 (Dual Belt Drive SN=>C03478)
13426-00
Belt, 2RBP56
SC5540B (73554)
Drive
13884-00
Belt, SP BEARVAC (3L32)
WV190S (75360) WV179S (77360), and WV160S (75350)
Drive
13973-00
Belt, 2RB63 Banded
SC5670B (75524)
Drive
14261-00
Belt, 3RB48 Banded
CH6720H, CH6730H, CH6993H (76635), CH611DH (76628), CH6670H (76624), 74628,
74624,
Drive
14770-00
Belt, 2RB61
CH4400, CH45342 (77412), CH45390 (77413)
Drive
14804-00
Belt, 5-5V750, Non Cog
CH123DH (7812086)
Drive
18093-00
Belt, 2RB47 [Qty 2]
CH45540 (77454)
Drive
18277-00
BX44 Belt
CH8720iH, CH8670H (76824), CH8993H (76835)
Hydraulic
18531-00
BX30 Belt
CH911DH, CH922DH (VIN>5VJAA00178W001015)
Hydraulic
18633-00
BX33 Belt
CH611DH (76628)
Hydraulic
17996
44
Description
Drive
Beater Bar
Dual Belt Drive
31460-00
Belt, 2BRP67
CH5653
Drive
31498-00
Belt, 2RB40
SC5720B
Drive
31995-00
Belt, 5L500 Wrapped Aramid
WT24, WT24S, WT24T
32124-00
Belt, 4L180
WT24S
32252-00
Belt, 3RB64
CH8540 (71854), CH9540H (72854), CHF9540H (76854)
32833-00
Belt, 2RBX56
SC5540 (SN>E01243)
Head
Transmission
Drive
ROTOR & SHREDDER KNIVES KITS
SHREDDER KNIVES REPLACEMENT KITS
All Kits contain knives, spacers, shafts, hardware and installation instructions
Part Number
Description
Models
70316
Kit, Shredder Knives
70530, 70515, 70525
70972
SC5540 (70554), SC5614 (71020), SC5670B
(75524), SC5540B (73554), 73525, 71014,
70520
70973
Kit, Shredder Knives (Wide body 3” SC models)
SC3265, SC3305 (70080), SC3305E (70085),
SC3240 (70380), SC3240T (70580), SC3270,
SC3270T, SC3342 (75311), 70385, 70180,
SC3306, SC3306E
71381
Kit, Shredder Knives (Narrow body 3” SC models)
SC3206 (70050) - Serial # C03159 and below
75502-00
SC2206
77589-00
Kit, Shredder Knives (Narrow body 3” SC models)
SC3206 - Serial # C03478 and above
77613-00
SC5720B
77616-00
77618-00
Kit, Optional Additional Shredder Knives
SC2170
COMPLETE ROTOR REPLACEMENT ASSEMBLIES
Part Number
Description
Models
70062
Replacement Rotor Assembly, 8 HP machines
(SN 25659 and below) (Shredder kit not included)
SC3265, SC3305 (70080), SC3305E (70085),
SC3240 (70380), SC3240T (70580), SC3270,
SC3270T, SC3342 (75311), 70385, 70180,
SC3306, SC3306E
70277
Replacement Rotor Assembly, 5 HP machines
SC3206 (70050)
70366
Replacement Rotor Assembly, 5” Chipper/Shredders
SC5540 (70554), SC5540B (71020), 71014,
70500
73371-00
Replacement Rotor Assembly, 5” Chipper/Shredders
SC5670B (75524), SC5540B (73554), 73525
74209-00
Rotor Replacement Assembly, 3” Chipper/Shredders
(Wide body models)
SC3265, SC3305 (70080), SC3305E (70085),
SC3240 (70380), SC3240T (70580), SC3270,
SC3270T, SC3342 (75311), 70385, 70180,
SC3306, SC3306E
75399-00
Rotor Replacement Assembly
SC2206
77591-00
SC3206
77612-00
SC5720B
77615-00
SC2170
888.625.4520
45
BLADE KITS
KITS CONTAIN ALL NECESSARY BLADES AND HARDWARE 1 of 2
MODELS
SN RANGE
VIN RANGE
KIT P/N
DESCRIPTION
0 - Current
70317
Small Chipper
Blade Kit
0 - 25658*
70205
Single Edge
Small Blade Kit
70738
Tool Steel Blade Kit
76295-00
Chipper Blade Kit
72493
Chipper Blade Kit
3" CHIPPER/SHREDDERS
70515, 70525, 70530
SC2170, SC2206, SC3206
(70050), SC3265, SC3305,
SC3306, (70080), SC3305E
(70085), SC3306E, SC3270
(70380), SC3270T (70580),
SC3342 (75311), SC3240, 70385,
70030, 72085, 72285, 70180,
25659 - Current
5VJAA00137W000009 Current
4" & 5" CHIPPERS
CH4400
CH5653, CH5540, CH4540
(73454), CH5540H (74554),
CH500H (74500), 73413
CH4614 (73420)
0 - Current
0 - Current
0 - 705078
5VJAA00197W000009 - Current
4.5" CHIPPERS
CH45342 (77412), CH45540
(77454), CH450H, CH45390
(77413)
0 - 902474
0 - 5VJAA00109W001849
74744-00
77412/13 Blade Kit
902475 - Current
76295-00
4-1/2 Chipper
Blade Kit
70453
Single Edge
Blade Kit
72493
Chipper Blade Kit
0 - 5VJAA00159W001743
74220-00
6 Inch Blade Kit
76293-00
Chipper Blade Kit
71426
8 Inch Chipper
Blade Kit
5" CHIPPER/SHREDDERS
0 - 26376*
SC5540 (70554), SC5614 (71020),
SC5540B (73554), SC5670B
(75524), SC5720B, 70500, 70520,
71014, 74520, 73525
26377 - Current
6" CHIPPERS
CH6720H, CH6730H, CH6670H
(76624), CH611DH (76628),
CH6993H (76635), 74624, 74628
CH6614 (71620),
CH6614H (72620)
46
0 - 704809
0 - 705118
BLADE KITS
KITS CONTAIN ALL NECESSARY BLADES AND HARDWARE 2 of 2
MODELS
SN RANGE
VIN RANGE
KIT P/N
DESCRIPTION
71426
8 Inch Chipper
Blade Kit
76293-00
Chipper Blade Kit
71426
8 Inch Chipper
Blade Kit
0 - 901387
71426
8 Inch Chipper
Blade Kit
901388 - Current
76293-00
Chipper Blade Kit
502304 - Current
74830-00
Blade Kit
0 - 5VJAA00109W001785
71426
8 Inch Chipper
Blade Kit
76293-00
Chipper Blade Kit
73900-00
12" Blade Kit
71445
4 Blade Stump
Cutter Kit
76292-00
12 Blade Cutter
Replacement Kit
0 - Current
76903-00
12 Blade Cutter
Retro Fit Kit
(To change from
4 blade to 12
blade system)
0 - Current
76906-00
12 Blade Cutter Upgrade
Kit
(To change from
6 bolt to 12 bolt system)
8" CHIPPERS
CH8720iH, CH8993H (76835),
CH8670H (76824)
0 - 704960
0 - 5VJAA00119W001755
904473 - Current
74824, CH800H (74800)
0 - 804669
8" & 9" PTO CHIPPERS
CH8540 (71854),
CH9540H (72854)
CHF9540H (76854)
9" CHIPPERS
0 - 704696
CH911DH (72928),
CH922DH (74950)
12" CHIPPERS
CH123DH (7812086)
500423 - Current
STUMPGRINDERS
SG340 (73711), 71755, 71785,
73710
0 - 805549
SG340
810639 - Current
73711 with 12-blade retrograde
fit kit, PN: 76256-00
0 - Current
SG340
888.625.4520
47
ACCESSORIES
Blades and Knives Kits
Blade Kit, P/N: 70738
Models: SC2170, SC3206, SC3265, SC3306
SC3306E & SC3342
Blade Kit, P/N: 74830-00 Model CHF9540H (Qty 16 blades)
Blade Kit, P/N: 76293-00
Models: CH611DH, CH6720H, CH8720iH, CH8993H,
CH911DH, CH922DH, CH8540, CH9540H
Blade Kit, P/N: 72493 Models: SC5720B, SC5540,
SC5540B, CH5653, CH5540H & CH5540
Shredder Knives Kit
P/N: 70972. Models: SC5540 & SC5540B.
Blade Kit, P/N: 76295-00
Models: CH4400, CH45540 & CH450H
Shredder Knives Kit
P/N: 77616-00. Model: SC2170.
Additional Knives Kit, P/N: 77618-00
48
ACCESSORIES
Blades and Knives Kits
3" Chipper/Shredder Screens
See model page for specific corresponding part numbers.
Fine .375"
Medium .75"
Shredder Knives Kit
P/N: 77613-00. Model: SC5720B
Coarse 1.375"
(Standard)
Wet Debris
SC2170 Screens
Fine .75"
#76893-35
Coarse 1.13"
(Standard)
#76758-35
Wet Debris
#77639-35
Shredder Knives Kit
P/N: 77589-00. Model: SC3206
Shredder Knives Kit, P/N: 70973
Models: SC3265, SC3306, SC3306E & SC3342
888.625.4520
2-handled Debris Bag, P/N: 17854
Models: Any models that discharge to the ground
49
ACCESSORIES
NEW
Attachable Debris Bag, P/N: 70355-00
Models: All 3" Chipper/Shredders
Two Wheel Tow Kit, P/N: 77000-00
Supplemental Adaptor Kit
(For Models Serial C03477 & below)
Wide Body Models
P/N: 77700-00
SC3206
P/N: 77701-00
Road Towable Chipper/Shredder Trailer, P/N: 77353-00
All Weather Cover, P/N: 70093
Blower Kit with 2-Blade Radial Fan
P/N: 70251, Models: SC3265, SC3306, SC3306E & SC3342
Leaf Tamper, P/N: 70089
50
ACCESSORIES
4.5" x 4.5" (11.4cm x 11.4cm) Discharge Chute
P/N: 74634-00. Models: CH4400, CH450H & CH45540
Low Profile Discharge, P/N: 74581-00
Models: CH8540, CH8720iH, CH8993H, CH911DH,
CH922DH, CH9540H & CHF9540H
Pintle Hitch, P/N: 14900-00
Models: CH611DH, CH6720H, CH8720iH, CH8993H,
CH911DH & CH922DH
Adjustable Feed Speed Kit, P/N: 76820-00
Hour/Tach Kit - Gas
P/N: 31605-00
Models: All gasoline engine
powered machines
Hour Meter Kit - Diesel
P/N: 71921
Models: CH611DH, CH911DH
& CH922DH
888.625.4520
12 Tooth Cutter Replacement Kit
P/N: 76292-00. Model SG340
51
ACCESSORIES
Wet Debris
#70559
Coarse 1.5"
(Standard)
#70332
Medium .75" Fine .375"
#70703
#70531
SC5540 - 5" PTO Chipper/Shredder Screens
1-speed Blower (4 blade fan w/4" dia. discharge) - P/N: 70487
2-speed Blower (8 blade fan w/6" dia. discharge) - P/N: 71110
Vacuum Hose Kit (8" dia. x 20')- P/N: 71125 (Requires 71110)
Model: SC5540
Fenders & Tail Lights Kit
P/N: 77510-00. Models: LS22 & LS27
Log Cradle Kit
P/N: 77189-00. Models: LS22 & LS27
NEW
4-Way Wedge Kit
P/N: 77514-00. Models: Only for use on LS21, LS22 &
PTO Dolly Wheels Kit - Set of 4
P/N: 71615-00. Models: All PTO models
LS27 models, serial # C01077 thru F01052
52
ACCESSORIES
14" Sabre Tooth Blade
Saplings up to 4" (10cm) in diameter
P/N: 74548-00
14" Triple Blade Brush Cutter
P/N: 32086-00
.155" diameter 10 Pack
.175" diameter 10 pack
75' Donut
P/N: 32033-00
3lb. Spool
P/N: 32035-00
.155" diameter line
Round, 10 pk.
P/N: 72780
Round, 1 lb. donut
P/N: 12390
Square, 10 pk.
P/N: 72779
Square, 1 lb. donut
P/N: 12391
.155" diameter Round
10 Pack
Nylon Blade Kit
P/N: 73060
Cast Iron Mow Ball P/N: 31767-12
Proline Head
P/N: 74891-00
Heat-treated Steel Mow Ball
P/N: 72704-12
888.625.4520
53
ACCESSORIES
NEW
10' Vacuum Hose Kit
P/N: 73606-00. Models: All Wheeled Vacuums
6-Bushel Hard Bottomed Debris Bag
Caster Wheel Kit
Debris Loader Discharge Deflector Cap Kit
P/N: 77450-00. Models: DL8 & DL10
Nozzle Wear Plate Kit (Includes hardware)
Vacuum Liner Kit (Includes hardware)
54
4' (1.2m) Flexible Discharge Extension
P/N: 74737-00. Models: All Debris Loaders
ACCESSORIES
Universal Road Towable Trailer Kit
P/N: 77041-00
Models: DL12653 & DL12720
Debris Loader Light Kit
P/N: 77105-00. Models: DL10, DL12653 & DL12720
Debris Loader Wear Liner Replacement Kits (Includes hardware)
P/N: 77398-00. Models: DL8 & DL10
P/N: 77073-00. Models: DL12653 & DL12720
16" (41cm) Vertical Chute Extension (Includes hardware)
P/N: 75888-00. Models: All Debris Loaders
To view a complete list of
ECHO Bear Cat parts and
accessory options,
please visit our website
Debris Loader Receiver Bar Kit (Includes hardware)
P/N: 77464-00. Models: DL8 & DL10
888.625.4520
and click on
Options and Accessories under the Products tab.
55
ECHO Bear Cat • 237 12th St. NW, West Fargo, ND 58078
For customer service or for your nearest
ECHO Bear Cat dealer call 888.625.4520
For International call 701.282.5520
Specifications, descriptions and illustrative material in this literature
is as accurate as known at the time of publication, but are subject to
change without notice. Illustrations may include optional equipment
and accessories and may not include all standard equipment
©2015 ECHO Bear Cat, a subsidiary of ECHO Incorporated
All Rights Reserved. Printed in the U.S.
#31768-00 • 09/15

5" (13cm) CAPACITY CHIPPER/SHREDDER

Transcription

Similar documents

Where you come to know.

CHIPPERS CHIPPER/SHREDDERS

model 1390xp

Boneng Gearboxes

The 7272 is a heavy-duty shear type shredder. The elements that

chipper/shredders

chipper shredder

- Brooks Construction

Dynamic 885 - Lynn Hendrix Equipment

Johnny Tremain by Esther Forbes Objectives