Marine Magic Dosing Pump

Marine Magic Dosing Pump
MM01-B (Master + Slave doser)
MM01-B-M (Master doser)
MM01-B-S (Slave doser)
Instruction Manual
(Index)
Panel Diagram
Why using Marine Magic MM01B (1+1) Dosing Pump ?
Features
Getting Started
Manual Mode
Timer Mode
Usage Instruction
Production specification
Accessories
Appendix
http://www.marinemagic-online.com
1
Product Diagram
Front
1.
2.
3.
7 Key panel to control the unit
Celluar extra sharp LCD display
Pump working LED
4.
5.
Auto mode / Timer mode LED
Quick motor-replaceable front housing.
Rear
Wall-mounted hole
Line out (Cable connect to slave)
http://www.marinemagic-online.com
2
Why using Marine Magic MM01B (1+1) Dosing Pump ?
1. SINGLE or DUAL doser
Based on your actual needs to buy it.
2. EASY-TO-USE INTERFACE
All the control process and dosing information is clearly showed in super clear LCD display.
3. FLEXIBLE DOSING TIME
Each pump could max. set 36 times on / off per week. Dosing could be set as weekly schedule. You
could set dose every other day. They are working independently.
4. FLEXIBLE DOSING SPEED
There are 4-speed settings. Each pump could work independently with its own speed.
5. HIGH ACCURACY, USE TIME TO CONTROL
Different from some traditional dosing pump, Marine Magic use time (hour / min / second) as input to
control the dosing amount. It is much accurate than using ML as an input indicator as it will be getting
inaccurate while the DC motor brush wearing and dosing tube become flatten. Using time to control
dosing rate, you could easy do the calibration by adjusting the time run.
6. SMALL AMOUNT DOSING CAPABILITY
The 4 speed is ranging from 0.05 ml – 0.65 ml / second. You could do accurate dosing as accurate as
0.1 ml.
7. DOSING STATUS MENU DISPLAY
After you set all your dosing instruction, the dosing status menu will show the coming dosing execution.
It shows the coming 3 set of dosing execution.
8. BUILD-IN Batteries Compartment for Timer backup
You could use rechargeable NIMH batteries or alkaline batteries to be the back up power supply of the
timer. Even under electric cut, the timer could still run up to 24 hours.
9. Compact and Sleek design, Front motor replaceable housing
Compact and it is wall-mountable. You could simply replace the motor by clicking the lock on the front
housing. Different from traditional doser, you need to screw off the screws from the back.
http://www.marinemagic-online.com
3
Features
1. Extra sharp cellular phone display.
2. Soft touch control panel.
3. With manual mode control as well as timer mode controls.
4. 36 on / off setting in weekly basis. Each pump operates independently.
5. Each dosing execution could set its own start time, run time and speed.
6. Small amount dosing, 4 setting dosing rate
a. S-1
0.05 ~ 0.075ml / sec. (Droplet dosing - Slow)
b. S-2
c. S-3
d. S-4
0.1 ~ 0.2 ml / sec. (Droplet dosing – Fast)
0.25 ~ 0.35 ml / sec.
0.5 ~ 0.6 ml /sec.
(The rate is based on water as media and a 6FT hose connected)
7. Memory function, after you set the dosing instruction, it will be stored in the RAM. Data could be kept
even under electric cut. Backup batteries could help to maintain the internal clock to run 24 hours.
8. Dosing display menu, showing dosing execution.
9. Use hour / min / sec. to set dosing amount. Easily to do calibration by adjusting the set time.
10. Adaptor could be adjusted in 4-direction. You could set a best position to fit the electric socket.
11. Low cost replacement for motor and pump.
http://www.marinemagic-online.com
4
Getting Started
1. Plug in the adaptor and Turn on the power
2. Set the current weekday and clock
Press ENT button to make the cursor appears.
Use the 4 way button to set current time and date you want.
Press “ENT” to make the cursor disappears
Press “Save” to enter the Main Menu.
3. Main Menu
Use up and down arrow to choose and then press ENT.
4. Manual Mode – See “Manual Mode” instruction
5. Timer Mode – See “Timer Mode” instruction
6. Time Set – You could change the current clock at anytime. See point 2 for changing the current day and
clock.
http://www.marinemagic-online.com
5
Manual Mode
In manual mode, you could operate the pump continuously or with a set time.
Warning
This pump is not designed for a continuous running usage. This is good for max. 10 min. run per dose. The
life of the motor and tube will be shortened for over times run.
1. To operate the pump continuously, set the time “00:00:00” and then move the cursor to “ON” and press
“ENT”. To turn off the motor, move the cursor to “OFF” and then press “ENT”.
2. To operate with a set time, just set the time you want to run and then move the cursor to “ON” and
press “ENT”. The pump will stop after running the time you set.
3. Under Manual mode, all the dosing instruction you set in timer mode would be suspended until you get
back to the Timer mode Display Menu.
4. The pump LED panel in the left-and-side will on while the motor and pump working
5. Press ESC to get back to Main Menu.
http://www.marinemagic-online.com
6
Timer Mode
Choosing the Timer mode in Main Manual, and then you will be entering the Dosing Display Menu first.
You will see the white LED will on and show the unit now entering into Auto time dosing.
Only under this screen the dosing pump would run the timer instruction you set.
Press “ENT” and then you will be entering in the Timer set-up menu.
Start Time
Run Time
Pump Speed
Set day
Use the cursor to the Start Time, Run Time, Pump speed and Weekday. Finish setting and then press save
you would go to next page.
There are totally 12 pages for setting up. Each page you could set 6 setting. The setting named
A1 ~ A36
B1~ B36
Every time you press “Save”, the instruction will be stored in the RAM already. Also it would move to next
page automatically. While you press “Save” at the final page (Page 12), it will jump back to the Main
Menu.
Then please select the Timer Mode and make your setting active.
http://www.marinemagic-online.com
7
Warning
•
Don’t set the timer with contraction. The overlapped one will not be carried out.
• Cannot set the start time at 00:00:00. 00:00:00 is a default set time when mean the pump is static.
• Don’t set the start time but leave the run time as “00:00:00”. If you want that entry becomes static,
please set the Start time and Run time both to be “00:00:00”.
Tips
Since each pump, motor would have tolerance, the amount you collect might have around 5% difference
between pumps.
This is advised you to do a Trail amount collected first in the Manual mode before you move to Timer
mode. Find out the time you need the pump to run for your desired amount, this is the key to dose your
solvent accurately.
http://www.marinemagic-online.com
8
Usage Instruction
General instruction
•
Keep away from water and sun exposure. Keep it away from humidity. Don’t put the unit too close
to the fish tank.
•
Don’t put anything on top of the unit
• Turn off and unplug if you do not use the unit.
• Don’t unplug the power plug by dragging the power cord.
About Pump and Peristaltic tube
•
Pump rate will be getting faster over a time of usage due to the wearing of silicon tube and brush
inside the motor. This is because the tube will become flatten and the dosing rate will become faster.
Monitor the amount you set and best to check it monthly. Use the time to adjust the amount you
want to maintain.
•
Please note peristaltic tube (Silicon tube) is consumable. Need replacement over a time of usage.
Life of the tube is more than 400 hours if only run around 10-20 minutes per day. 400 hours is
talking about the total working time, the idle time is not counting in. Generally, the tube should be
last for a year.
•
•
•
Please put the pump into the shaft gently while replacing.
Please do not put any lubricant in the pump.
If found abnormal noise of the pump, please “clip off” the pump from the unit and try to tight up the
pump. “Clip on” the pump after fix it.
•
In case the pump stalled, clip off the pump and then clip on again.
About motor
•
Please note that motor is consumable, needed replacement if needed. You could contact us for any
parts replacement. Life of DC motor is usually about 125-150 hours base on 5 min on and 5 min off
life test. A very best quality DC motor could not more than a 300 hours life generally.
•
Generally, most of the dosing pump is using DC motor to drive the pump, which is not supposed to
be a continuous running usage. Marine Magic is also using a DC motor to drive the pump working.
Life of the motor is about 150 hours and is based on a 5 minutes on and 5 minutes off to do the life
test. If you just use the pump 10-20 minutes per day, the life should be more than 150 hours and it
should be last for 1-2 years.
•
All the DC motor has carbon brush inside and it will be wearing over times. You might find there is
black debris around the motor and pump after some times usage which is usual.
About Usage
•
To protect the reef of your tank, this is not recommended to connect the dosing pump with a
container over your 5 days dose amount.
•
This device is NOT designed for a continuous running dosing. This is recommended to run the
pump max. with 10 minute on and then with 10 minutes off. Life will be reduced if running over it.
• Please don’t run the unit over 60 min. everyday or the life of the unit life will be shortened.
http://www.marinemagic-online.com
9
•
This is recommended to connect the air line with length less than 6 feet. Siphoning effect will be
getting less if longer than that.
About PCB control box.
•
Each part inside the box is replaceable and you could purchase spare parts with us. Generally, the
PCB and LCD are durable parts.
About batteries of Timer Backup
•
MM01B has build in batteries compartment for backup power in case of electric cut or blackout.
(Batteries not included.) You could use 2 x AAA alkaline batteries or rechargeable NIMH batteries
in the compartment.
•
An 1000 mAH NIMH rechargeable batteries could keep the clock run 24 hours under an electric cut.
While the batteries power getting low, the white LED (Auto) will flash.
•
Rechargeable batteries will be charged with 12V power supply.
About Check valve
•
Installation of Check valve. – There is IN / OUT marking on it. Connected the External tube to the
end with marking “IN”.

http://www.marinemagic-online.com
10
Product Specification
Model#
MM-01B / MM01B-M / MM01B-S
Input Power supply:
100V – 240V 50/60 Hz
Output Power supply:
12V, 1A, DC motor.
Rechargeable batteries:
NIMH batteries
Product Dimension:
L 70 x W 100 x H 105 mm (Master / Slave)
Box Dimension:
L 200 x W 180 x 105 mm
Net Weight:
640 g
Master – 245 g (no batteries) ,
AAA x 2 pcs
Slave – 200 g
Gross Weight:
850G
Max. Flow rate:
0.5 – 0.6 cc / sec
Min. Flow rate:
0.05 – 0.075 cc / sec
Time Control:
Hour / Min / Sec.
Continuous running:
No.
Motor Life:
150 hours. (Total run time of Motor)
Accuracy:
+- 5%
Accessories
1 x 2M external tube
1 x Plastic Tube holder
4 x Plastic connector (Connecting internal and external tube)
2 x Check valve
1 x 5FT Universal adapter (with US, Australia, UK and Europe plug choice)
Connecting cable
http://www.marinemagic-online.com
11
Appendix
Check Valve, connector and air line pack
Tube Holder
Adaptor (with 1 plug only)
Connecting cable.
http://www.marinemagic-online.com
12