FENNER - Distribution Center
Transcription
FENNER - Distribution Center
Solutions for the Floor, and the Roof ! Fenner Drives offers you easy, one-stop shopping. Not only does PowerTwist Plus offer great solutions for your conveying needs, it also provides unrivaled solutions for your HVAC needs. • Reduce V-belt inventory — always have the right belt in stock • Permanent replacement V-belt — just fit it and forget it! Rubber V-belts Velocity in In/Sec • Reduce drive vibration and noise for quieter running systems S-56 -M1H Motor Inboard Horizontal PowerTwist Plus 0 10 20 30 40 50 Revolution Number 60 Label: Belt Resonance Problem Conventional rubber V-belts contain an inner cord which transmits vibrations from the motor to the driven components, vibrations that cause system noise and shorten the life of your bearings. PowerTwist Plus V-Belts combine a high-performance polyurethane elastomer reinforced with multiple plies of polyester into a segmented twist-lock design. That gives you a high strength, low stretch, vibration-dampening V-belt with the same horsepower rating as classical section V-belts. PowerTwist Plus V-Belts also offer high resistance to abrasion, shock loads, and harsh environments. PowerTwist Plus V-Belts can be made to the required length by hand in seconds and rolled onto the drive like a bicycle chain. There’s no machine tear-down required and no need to dismantle drive components. No tools, no problem! Plus, they have the same cross section as other belts so they can be installed on existing pulleys with no change in setup. They are available in 3L, A/4L, B/5L, C and D sections. Upgrade to a fast, permanent replacement that keeps buildings’ occupants cool in summer, warm in winter and profitable all year long. 311 West Stiegel Street Manheim, PA 17545-1747 USA 800-243-3374 717-665-2421 Zero Downtime Solutions for your Hudson Road Leeds, LS9 7DF UK +44 (0) 870 7577007 +44 (0) 113 2493486 www.fennerdrives.com Distribution Center © 2008 Fenner Drives MSDC-003 Distribution Centers Roller Drive™ With a twist of the wrist, quickly and permanently replaces endless rubber belts on belt-driven live roller conveyor systems. • • • • • Quick installation; installs in minutes without tools. Belts are easily made to the required length by hand in seconds Increased belt flexibility for longer life on curves Runs in V- and round pulleys Any Belt, Any Time! V-Belt Driven Live Roller Conveyors • True drop-in direct replacement; same ride height as B/17 section endless V-belts • No need to dismantle head and tail drive components — just “fish” it through your drive system Zero Downtime Solutions for your Conveying Needs Twisted O-Rings Zero downtime replacement for original endless O-Rings. • Easily installed in seconds with no tools and without dismantling line shaft or rollers • Reduce downtime on live roller conveyor systems. No welding required! • Quickly connect with easy to use metal or plastic connectors • Popular 3/16" diameter always in stock, ready to ship to you! Non-stock sizes can be made in a week or less. Endless O-Rings Rapistan® Conveyor Systems (Siemens Rapistan, Dematic) • Perfectly suited to replace 9/16" round profile belts • Installs quickly without dismantling drive system components • Industry proven superior replacement for round belts in this application Blue-Green Driver Pad Don’t be fooled by the inferior yellow, black, or green copycats; we’ve got the real thing. Often imitated, never duplicated. • Manufactured to OEM specifications Replacement O-Rings for line shaft, live roller conveyors and light-duty transfer conveyors. • Elastic with excellent memory • Popular 1/8", 3/16" and 1/4" sizes always in stock • Custom sizes, colors and durometers made to order with rapid order turnaround • High coefficient of friction • Solid polyurethane construction Belt & Chain Tensioners® Eliminates the need to manually retension your drive systems. • Allows belt installation without tools • Always a consistent profile with ideal hole alignment • Maintain correct drive belt tension automatically, achieving optimum drive performance • Contains 100% virgin material, allowing maximum performance • Reduce system downtime due to periodic belt retensioning • Always in stock, ready to go to you! • Cut down operating and component replacement costs due to premature belt failure Rapistan® is a registered trademark of Dematic Corp. www.fennerdrives.com 800.243.3374 Distribution Centers Roller Drive™ With a twist of the wrist, quickly and permanently replaces endless rubber belts on belt-driven live roller conveyor systems. • • • • • Quick installation; installs in minutes without tools. Belts are easily made to the required length by hand in seconds Increased belt flexibility for longer life on curves Runs in V- and round pulleys Any Belt, Any Time! V-Belt Driven Live Roller Conveyors • True drop-in direct replacement; same ride height as B/17 section endless V-belts • No need to dismantle head and tail drive components — just “fish” it through your drive system Zero Downtime Solutions for your Conveying Needs Twisted O-Rings Zero downtime replacement for original endless O-Rings. • Easily installed in seconds with no tools and without dismantling line shaft or rollers • Reduce downtime on live roller conveyor systems. No welding required! • Quickly connect with easy to use metal or plastic connectors • Popular 3/16" diameter always in stock, ready to ship to you! Non-stock sizes can be made in a week or less. Endless O-Rings Rapistan® Conveyor Systems (Siemens Rapistan, Dematic) • Perfectly suited to replace 9/16" round profile belts • Installs quickly without dismantling drive system components • Industry proven superior replacement for round belts in this application Blue-Green Driver Pad Don’t be fooled by the inferior yellow, black, or green copycats; we’ve got the real thing. Often imitated, never duplicated. • Manufactured to OEM specifications Replacement O-Rings for line shaft, live roller conveyors and light-duty transfer conveyors. • Elastic with excellent memory • Popular 1/8", 3/16" and 1/4" sizes always in stock • Custom sizes, colors and durometers made to order with rapid order turnaround • High coefficient of friction • Solid polyurethane construction Belt & Chain Tensioners® Eliminates the need to manually retension your drive systems. • Allows belt installation without tools • Always a consistent profile with ideal hole alignment • Maintain correct drive belt tension automatically, achieving optimum drive performance • Contains 100% virgin material, allowing maximum performance • Reduce system downtime due to periodic belt retensioning • Always in stock, ready to go to you! • Cut down operating and component replacement costs due to premature belt failure Rapistan® is a registered trademark of Dematic Corp. www.fennerdrives.com 800.243.3374 Solutions for the Floor, and the Roof ! Fenner Drives offers you easy, one-stop shopping. Not only does PowerTwist Plus offer great solutions for your conveying needs, it also provides unrivaled solutions for your HVAC needs. • Reduce V-belt inventory — always have the right belt in stock • Permanent replacement V-belt — just fit it and forget it! Rubber V-belts Velocity in In/Sec • Reduce drive vibration and noise for quieter running systems S-56 -M1H Motor Inboard Horizontal PowerTwist Plus 0 10 20 30 40 50 Revolution Number 60 Label: Belt Resonance Problem Conventional rubber V-belts contain an inner cord which transmits vibrations from the motor to the driven components, vibrations that cause system noise and shorten the life of your bearings. PowerTwist Plus V-Belts combine a high-performance polyurethane elastomer reinforced with multiple plies of polyester into a segmented twist-lock design. That gives you a high strength, low stretch, vibration-dampening V-belt with the same horsepower rating as classical section V-belts. PowerTwist Plus V-Belts also offer high resistance to abrasion, shock loads, and harsh environments. PowerTwist Plus V-Belts can be made to the required length by hand in seconds and rolled onto the drive like a bicycle chain. There’s no machine tear-down required and no need to dismantle drive components. No tools, no problem! Plus, they have the same cross section as other belts so they can be installed on existing pulleys with no change in setup. They are available in 3L, A/4L, B/5L, C and D sections. Upgrade to a fast, permanent replacement that keeps buildings’ occupants cool in summer, warm in winter and profitable all year long. 311 West Stiegel Street Manheim, PA 17545-1747 USA 800-243-3374 717-665-2421 Zero Downtime Solutions for your Hudson Road Leeds, LS9 7DF UK +44 (0) 870 7577007 +44 (0) 113 2493486 www.fennerdrives.com Distribution Center © 2008 Fenner Drives MSDC-003