Needlepoint Belt Finishing Instructions
Transcription
Needlepoint Belt Finishing Instructions
FINISHED SIZE = Measurement from end of buckle on current belt to best fitting hole. ? Finished Size Manufactured belt. Not available. ? ? ? ? NOTE: Needlepoint belt size is NOT the same as manufacturer’s size or pant size. Length to Stitch = FINISHED SIZE minus 6”. Finished Size Length of Stitching Design Size 2” 2” 1-1/2” 1-1/2” COVERED COVERED 1-1/2” COVERED Length to Stitch = FINISHED SIZE minus 4”. 2” 1-1/2” COVERED Finished Size Length of Stitching Design Size 2” 1-1/2” COVERED The stitched width of the belt MUST include turn rows. These extra rows will be rolled under in the finishing process and some will be unseen. (See edge of belt on left.) We do not suggest a binding stitch. For recommended STANDARD 1-1/4” wide finished belt, stitch 1-1/2”. (A child’s belt may be narrower.) For finished widths of 1”, 1-1/8”, or 1-1/2”, stitch the desired width plus 2 extra rows on top and bottom. NOTE: Painted belt widths vary greatly, so you will need to measure. NOTE: BASKETWEAVE IS THE PREFERRED METHOD FOR STITCHING BELTS