innovation hire service - Hy

Transcription

engineering excellence
sales
innovation
hire
export
service
D E S I G N , M A N U FA C T U R E A N D S U P P LY O F S P E C I A L I S T T O O L S A N D E Q U I P M E N T
TO THE UTILIT Y INDUSTRY
Hy-Ram Engineering Co. Ltd
Our dedication to excellence…
Formed in 1976, Hy-Ram Engineering Co. Ltd has established itself as a leading design and manufacturer of
specialist equipment for both plastic and metallic distribution pipelines…worldwide!
Principally
working
across
water, gas, wastewater, landfill
and
industrial
sectors, Hy-Ram
provide a range of products and services essential for the provision, installation and maintenance of utility
distribution networks.
Hy-Ram’s core product range includes Automated Butt Fusion and Electrofusion equipment, Underpressure
Head Office - Mansfield
drilling equipment, Squeeze off and Pipe Cutting equipment. ‘In-house’ developments of specialist Water
Valves and Fittings have further diversified our comprehensive product range.
In addition, Hy-Ram also work collaboratively with ‘key’ partners, an element of this is their alignment with
‘brand leading’ suppliers in order to distribute the ‘complete utility tooling package’
Much of Hy-Ram’s success is attributed to its reputation for good quality and well engineered products…
manufactured and produced at competitive prices. To achieve this reputation, for many years, Hy-Ram has
integrated with major worldwide Gas companies and regional water companies and has developed into an
important supplier to the UK utility sector and the wider International markets.
Equipment is available for Sale or Hire from a National Sales Team and UK Depot Network. Hy-Ram’s
South East - Enfield
headquarters and principle manufacturing site is located in Mansfield, England, other facilities are strategically
located in London, Scotland and Bury.
Hy-Ram’s…commitment to quality…
Hy-Ram continues to build on over 35 years of experience by investing in systems, resources and above
all the specialist skills and dedication of our personnel. We are accredited by LRQA to BS EN ISO 9001:
2008 and understand the necessity of implementing strict procedures to control both quality and
service. The ‘scope’ of our approval covers ALL aspects of our business…. ‘The design, manufacture, sale,
hire and repair of tools, equipment and other associated products applicable to the gas, water and
Scotland - West Lothian
industrial markets’.
Every effort has been made to make the information in this brochure as accurate and up-to-date as possible.
Hy-Ram operates a policy of continuous improvement and therefore reserves the right to modify product
specifications without notice. All products supplied are subject to Hy-Ram ‘conditions of sale’ or ‘conditions of
hire’, copies of which are available on request. If you have any questions relating to the products or services in
this brochure, please contact our Sales Office 0n +44 (0)1623 422982.
Hy-Ram is associated with a number of industry trade organisations designed to influence and improve
North West - Bury
industry procedures, safe practice, equipment specification and innovation.
Hy-Ram is proud to be associated with...
contents
Equipment & Tooling
3
Butt Fusion
4
Electrofusion
7
Ancillary Equipment
15
PE Pipe Squeeze Off
17
Pipe Cutting
22
Underpressure Drilling
27
Gas Tooling
34
Water Tooling
41
Trenchless
52
Flow Stopping
54
General Tooling
58
Pipe Fittings & Valves
67
Specialist Valves & Saddles
68
Flange Adapters / Couplings
73
Electrofusion Fittings
73
Stainless Steel Fittings
74
Hire
75
Repair, Service & Calibration
77
T:
01623 422982
F:
01623 661022
E:
[email protected]
W:
www.hyram.com
2
Equipment
& Tooling
Tooling quality, reliability and performance is critical to the successful
progress of a pipeline project. The right tool for all the circumstances
is essential if unnecessary delays are to be prevented. Ease of
operation coupled with safety are important and we are continually
improving our designs with new features and innovating solutions to
help improve productivity, efficiency and safety.
Hy-Ram manufacture and supply a wide range of Equipment and Tooling for the Gas and Water
pipeline industries. Whether your requirement is for a simple hand-tool, a fully automated butt
fusion machine or for professional technical advice on any
Hy-Ram equipment - our Sales and Engineering Teams are waiting to assist.
3
Equipment & Tooling
Hy-Ram supply a comprehensive range of Butt Fusion machines and accessories for
jointing PE pipes up to a maximum of 1600mm diameter. Being a long established
manufacturer of this equipment, we can offer our expertise and advice worldwide for
any plastic pipe welding enquiry.
Our range covers small and large bore in both ‘workshop’ and ‘field’ formats. A full repair
and calibration service is also available on most types of equipment.
Butt Fusion
Small Diameter Field Butt Fusion Machines
Fully Automatic
Small Bore ‘Field’ Butt Fusion Machines: 63mm – 400mm diameter…
Hy-Ram has manufactured high quality Butt Fusion machines for the worldwide market since the early 1980’s. Our current range of Superweld machines is
available in Fully Automatic, Semi Automatic and Manual formats.
Hy-Ram supply both ‘Field’ and
‘Workshop’ Butt Fusion machines
Constantly improved in terms of practical design features and software
upgrades, the latest version brings together a machine packed with innovative
ideas in order to ensure that the Superweld range remains a favourite with both
purchasers and hirers alike.
from 63mm – 1600mm diameter.
Hy-Ram: Fully-Automatic Butt Fusion Machines -
Superweld
The Fully Automatic Superweld range incorporates all the features and
refinements expected from a leading manufacturer… including…
o Compact, lightweight, robust design
o Narrow width construction and convenient handles for trench use
o Easily converted on site for ‘pupping’ capability (most machines)
o Automatic, fully floating ‘lock-on’ Trimmer
o Roller mounted, fully floating ‘drop-on’ Hotplate
o Capacity to weld various polymers including: Polyethylene, Polypropylene and
Polybutene (Flexalen PB – pipe system)
BFM 400 Superweld Fully
Automatic Butt Fusion Machine
At the heart of the Fully-Automatic system is the Superweld Electro/Hydraulic
Control Unit featuring…
o Fully programmed ‘menu -driven’ software with all pipe Diameter/ SDR
combination welding parameters for a variety of pipe types
o Database memory with up to 500 joint history
o Joint Data Download via Handheld printer or USB Memory stick
o Bespoke Joint Data Analysis software for recording and analysing joint quality,
operator performance, joint integrity and so on.
o ‘Dummy Joint’ procedure for first weld / hotplate cleaning
o Automatic Drag measurement
o Automatic pressure, time and temperature monitoring throughout the fusion
process
o Hy-Ram’s unique method of accurate Drag assessment
o Pipe slippage detection
o Early Clamp removal detection
o Easy to understand ‘Error message’ display
o Programmable PIN access and project numbers
BFM 315 Superweld Fully Automatic Butt Fusion Machine
T:
01623 422982
F:
01623 661022
E:
[email protected]
W:
www.hyram.com
4
Fully Automatic
Models Available
Product code
Size range (Diameter) Fully-Automatic
BFM180
BFM250
BFM315
BFM400
63 – 180mm
90– 250mm
90 – 315mm
250 – 400mm
4
4
4
4
SemiAutomatic
4
4
4
4
Manual
4
4
4
4
Data Download Options…
Recent developments have meant that Hy-Ram can now offer a Joint Data
Download option via a USB Memory Stick. The Stick comes pre-programmed
with bespoke software and allows data capture and subsequent transfer to a
PC. Then by using Hy-Ram’s unique software, the joint data transferred can be
viewed, analysed and presented in a number of ways dependent on operator
requirements. Example images of Hy-Ram’s standard software package are
shown…
USB Download Option
Hy-Ram has the facility to ‘tailor-design’ software analysis programs to suit
individual customers requirements.
Printer Option
Download Software - Joint Listing
Download Software - Search Option
Download Software options for visual
representation
Manual & Semi Automatic
In the case of Semi-Automatic machines, there is an option of a Data-logging
unit which will continuously monitor and record time, pressure and temperature throughout the jointing process. These jointing parameters are stored in
memory for subsequent data-download.
BFM250 Superweld Manual
machine
5
BFM250 Superweld Semi-auto
machine
Data-Logging Unit
Available to Hire
Liners available to suit ALL pipe diameters
Repair & Service available
Eq ui p ment
& To o lin g
Small Diameter Fabrication Butt Fusion Machines
Fabrication Machines
Workshop’ Small Bore Butt Fusion Machines
Hy-Ram has expanded the range of Superweld Fully-Automatic machines.
To accompany the range of ’field’ machines... Hy-Ram has also developed
’workshop’ units up to 500mm diameter for continual welding on a production
basis.
Working in conjunction with leading fabricated pipe fitting manufacturers, we
have been able to optimise the machine capacity and functions in order to give
a very simple, highly competitive, robust, reliable unit.
The machines are all Fully-Automatic (CNC) format suitable for welding PE, PP,
PVDF and other thermoplastic pipes and fittings.
Model
Size Range (Diameter)
Power
Fully Automatic
BFM180WS
BFM250WS
BFM315WS
BFM400WS
BFM500WS
63-180
90-250
90-315
200-400
250-500
110V, 50HZ, 2.6KW
110V, 50HZ, 3.1KW
110V, 50HZ, 4.3KW
110V, 50HZ, 6.8KW
240V, 50HZ, 10.5KW
4
4
4
4
4
BFM180WS Workshop Machine
Large Diameter Field Butt Fusion Machines
Semi & Fully Automatic
Hy-Ram supply both ‘Field’ and ‘Workshop’ Butt Fusion Machines from
63mm – 1600mm diameter.
Large Bore ‘Field’ and ‘Workshop’ Butt Fusion Machines:
500mm – 1600mm diameter…
Through our ten year association with KWH... Hy-Ram are able to offer a range of
Butt Fusion machines up to 1600mm diameter.
KWH Pipe Technology are world leaders in the development of welding
technology for polyethylene pipework systems up to 1600mm diameter and up
to 20 bar pressure. The range of products includes equipment for joining straight
pipes by using butt fusion or extrusion welding, band saws, factory welding
machines for production of fittings and apparatus for supervision of welding
quality and control of welding parameters.
The PT series of ’Field’ machines offered...
PT800 with Crane
Fully-Automatic Controller
Model
Size Range (Diameter)
PT500
PT630
PT800
PT1000
PT1200
PT1600
200 – 500mm
315 – 630mm
450 – 800mm
630 – 1000mm
630 – 1200mm
1000 – 1600mm
Power
230 V, 8.4 KW
400 V, 11.5 KW
400 V, 13.9 KW
400 V, 17.4 KW
400 V, 21.7 KW
400 V, 54.0 KW
LDU Data-Logging
compatibility
FullyAutomatic
available
4
4
4
4
4
4
4
Crane with
electric Hoist
option
4
4
4
4
4
Data-Logging Unit
T:
01623 422982
F:
01623 661022
E:
[email protected]
W:
www.hyram.com
6
Electrofusion
Hy-Ram offer a complete range of tools, equipment and fittings for the electrofusion of
PE pipes. Our range, available for Sale or Hire includes; control boxes, scrapers, clamps,
drive keys, wipes and so on.
Electrofusion Control Units
Electrofusion Boxes
The New Hy-Ram Datafuse Act2/3 Electro Fusion Box
Features and Benefits summary:
o Safety, Strength, Flexibility, Reliability
o Welds all electro fusion fittings 8v to 48v (710mmØ)
o Welds long burn fittings (4500 seconds)
o Large alpha-numeric display
o Flexible welding modes
o End of weld cooling time
o Flexible data logging
o Data log download format /USB encrypted data
o Data log entry options
o Data download manager
Datsfuse Act 2/3 Electrofusion Box
o Programmable calibration periods
o Extended fault finding information
Features and Benefits summary
o Operating languages
Standard
All of the above is standard for both the Act2 and Act3.
o Barcode automatic fitting
Hy-Ram Datafuse Act3
recognition
o Full Automatic Welding using Barcode Scanner Allows only authorised welders to operate the
o Barcode scanner
equipment.
o Ambient temperature
o
Welders
information logged on every weld.
compensation
o
Works
in
conjunction with ‘Error Lock-out’ for best possible QA of Electro-fusion joint.
o Error lock out c/w supervisor
Description:
The unit can be set to lock operation when specified faults are detected. This will require a
release
supervisor
to
access the problem then unlock the unit.
o Operator ID card for QA solutions
“Prove-It”
Alignment
Clamp
o Supervisor ID card for QA solutions
o
The
PROVE-IT
Clamp
is
a new accessory to the Hy-Ram Datafuse Act3 range of equipment.
o Job location and contract cards
o
The
clamp
uses
wireless
technology to transmit a signal to the Electro-fusion control box that the
3x upgrades available:
clamp
is
present
during
the
welding cycle.
o Prove-It Clamp
o
The
unit
can
be
set
to
lock
the
electrofusion control box if not present and is logged with a unique
o Remote wireless communication
serial
number.
o GPS Location
o The unit is capable of alignment and re-rounding of 63mm to 180mm pipe and gives operators and
clients complete peace of mind that the clamp is in use as it should be.
Description: Using a wireless “mobile phone” communication, data can be received from and sent to the
welding unit. This information can be the data log memory or the error lock out.
The emailed data can be sent to any email address of your choice, and can be sent as XML format to
allow a Web Server to filter and present the data, or it can be sent as the standard USB memory pen
download format.
Prove it Clamp 63 - 180mm
MAXIFUSE™ Proxima Control Box
Hy-Ram offer the MAXIFUSE™ Proxima series of multimodal electrofusion processors. These boxes
can cater for a wide variety of fittings and can fuse most electrofusion fittings. Choose from manual,
automatic (for use with embedded resistor fittings), and bar code reading options. Fusion event locations
can also be recorded through GPS.
MAXIFUSE™ Proxima Control Box
7
Available to Hire
Eq ui p ment
& To o lin g
Electrofusion Clamping
Re-rounding tools
Re-rounding Tools
A complete range of Re-rounding Clamps from 16mm up to 400mm diameter
are available for use on PE pipes prior to electrofusion where ovality has been
caused by storage or manufacture.
A
A
B
B
B
B
B
C
C
C
C
C
C
C
D
D
D
E
E
E
B
C
D
E
Product code
Description
089-000097
089-000098
089-000099
089-000084
089-000100
089-000101
089-000085
089-000086
089-000102
089-000087
089-000103
089-000104
089-000088
089-000105
089-000106
089-000089
089-000401
089-000402
089-000403
300-000220
16-32mm Multi-size Re-rounding Tool
20mm Nutcracker Type Re-rounding Tool
63mm Hinged Collar Type Re-rounding Tool
200mm Split Collar Type Re-rounding Tool
Segmented collar 315mm with ratchet
Reducing shell set 400-355mm
Large Diameter Hydraulic Re-rounding Clamp
Used for re-rounding large diameter PE pipe prior to use with electrofusion
couplers. Operating size can be varied by addition of reducing shells.
Hydraulic Re-rounding Clamp
Product code
Description
089-000334
604-000010
604-000011
089-000335
604-000012
604-000013
089-000336
604-000014
604-000015
Hydraulic Re-rounding clamp + pump 400mm
Set of reducing shells (3 pcs) 400 to 355mm
Alignment Clamps
‘Black’ Range Electrofusion Clamps
Brand new range of precision engineered clamps designed to be tough, strong,
rigid and amongst the most accurate clamps available!
Manufactured using the latest water-jetting techniques, the clamps have a ‘feel
of quality’… more importantly they remain ‘rigid’ even under arduous pipe/site
conditions where lesser clamps would deflect and loose accuracy of alignment.
EFRAC 16-32 and 20-40 Uni-Clamp; Restraining and Alignment Clamp
Compact, powerful Clamp with capability for straight, reducing and elbow fittings.
EFRAC 16-32 Uni-Clamp
Product code
Description
Size Diameter Range
089-000433 EFRAC 16-32 Uni-Clamp
T:
01623 422982
F:
01623 661022
E:
[email protected]
W:
16, 20, 25 and 32mm
20, 25, 32 and 40mm
www.hyram.com
8
Alignment Clamps
EFRAC 16-63 Uni-Clamp; Restraining and Alignment Clamp
Compact, powerful Clamp with capability for straight, reducing and elbow
fittings.
Product code
Description
Size Diameter Range
16, 20, 25, 32, 40, 50 and 63mm
EFRAC 20 – 63 Elbow Clamp Kit, (Parts in Kit also allows adaption for use
on straight, reducer and 45˚ Couplers)
Extremely ‘handy’ and useable Clamp designed specifically for use when
connecting an elbow to a tapping saddle but also versatile for any elbow
application.
or, just dedicated Elbow Clamps can also be specified (EFRAC 32 Elbow Clamp
and EFRAC 63 Elbow Clamp).
Product code
EFRAC 32 & 63 Elbow Clamps
Description
Size Diameter
Range
089-000320 EFRAC 20 - 63 Elbow Clamp Kit (including
clamping arms for 20, 25, 32, 40, 50, and
63mm) including case
20, 25, 32, 40, 50
and 63mm
089-000318 EFRAC 32 Elbow Clamp
089-000319 EFRAC 63 Elbow Clamp
32mm
63mm
EFRAC 180 Standard and Delux Kits; Restraining and Alignment Clamp
Extremely rigid and powerful Clamp available in two Kit options and with the
option of additional accessories.
EFRAC 180 – Standard Kit
‘Click-tight’ liners for quick and easy adjustment for different pipe diameters…
screws and allen keys are not required!
The standard Clamp caters for straight and reducing fittings, whilst the Delux
Clamp can also handle elbows. Both kits come in a tough carry-bag and have the
option of additional size liners and a 90˚ arm attachment to enable the use of a
third clamp ring for welding 90˚ equal tees.
Product code
EFRAC 180 – Delux Kit
EFRAC 180 delux
with 90˚ Tee Adaptor
Clamp
Description
Size Diameter Range
089-000302 EFRAC 180 Kit – Standard,
complete with straight bar,
standard liners and bag
089-000345 EFRAC 180 Kit – Delux, complete
with knuckled bar, standard liners
and bag
089-000305 EFRAC 180 90˚ tee adaptor clamp
63, 90, 125 and 180mm
63, 90, 125 and 180mm
63, 90, 125 and 180mm
Kit Bag
Table showing all ‘click-tight’ liners available
Product code
Description
604-000005
63mm Liner, each (4 required)
604-000009
604-000004
604-000006
604-000003
604-000007
604-000008
* Note, other size liners available on request
9
Available to Hire
Eq ui p ment
& To o lin g
Alignment Clamps
Electrofusion Alignment Clamps
The Hy-Ram range of Electrofusion Alignment Clamps cover the range 16 to
400mm diameter for any combination of pipe sizes within the clamp range…
whilst also maintaining the centre-line.
EFAC 63 Alignment Clamp (no liners required)
Small, compact Service pipe Alignment Clamp ensures quick and easy clamping
of any size pipe within the range with no adjustment or loose pieces. The
standard version handles straight and reducing fittings, whilst the 45/90˚ version
also facilitates clamping of elbows.
EFAC63 Standard
Alignment Clamp
EFAC63 45/90˚
Alignment
Clamp
Product code
Description
Size Diameter Range
089-000050 EFAC 63 Alignment Clamp
089-000166 EFAC 63 45/90˚ Alignment Clamp
16 – 63mm (inclusive)
EFAC 180 Alignment Clamp (no liners required)
The ‘original’ no-liner clamp, the gear in the base ensures quick and easy
clamping of any size pipe within the clamp range with no adjustment or loose
pieces. The standard version handles straight and reducing fittings, whilst the
45/90˚ Adaptor kit also facilitates clamping of elbows and tees.
Product code
EFAC 180
Alignment Clamp
Description
Size Diameter Range
089-000048 EFAC 180 Alignment Clamp
089-000049 45/90˚ Adaptor Kit for EFAC 180
EFAC 180 Alignment
Clamp C/W 45/90 Adapter Kit
EFAC180 Alignment Clamp – ‘European’ style (no liners required)
Similar to the EFC180 except features a double clamp either side of the fitting in
order to increase rigidity. Comes complete in a strong steel carry-case.
Product code
Description
Size Diameter Range
089-000140 EFAC180 ’double’ Alignment Clamp
Kit (including steel carry case)
089-000049 45/90˚ Adaptor Kit for above
European Style
EFAC 180 Kit
EFRAC 250 Restraining and Alignment Clamp
Strong, robust ‘original’ style Clamp with liners suitable for clamping straight and
reducing fittings.
Product code
Description
Size Diameter Range
089-000093 EFRAC 250 Alignment Clamp
300-000022 Liner 250/180 (4 required)
180 - 250mm (inclusive)
EFRAC315 Restraining and Alignment Clamp
Strong, robust ‘original’ style Clamp with liners suitable for clamping straight and
reducing fittings.
Product code
Description
Size Diameter Range
089-000094 EFRAC 315 Alignment Clamp
300-000057 Liner 315/250 (4 required)
T:
01623 422982
F:
01623 661022
E:
[email protected]
W:
250 - 315mm (inclusive)
www.hyram.com
10
Manual Positioning Kit
Manual Positioning Clamps (280,315, 355, 400)
Manual Positioning Clamps are for supporting and restraining medium size pipe
work throughout the electrofusion jointing process. These clamps are for use in
line or angled joints with the correct base unit.
Product Code
Description
089-000415
089-000416
089-000417
089-000418
300-000221
300-000222
280mm Positioning Clamp
400 - 315mm Reducing Liner Set
400 - 355mm Reducing Liner Set
K Type Mains Positioning Clamp (250 & 500mm)
For positioning and supporting PE pipes and equal or reduced outlet couplers,
bends, elbows, 3 way ‘T’ fittings.
250mm, 3 way
250mm, 2 way
Product code
Description
089-000347
Mains restraining clamp K type 63-250mm, 2 way,
straight base
Mains restraining clamp K type 63-250mm, 2 way c/w
angle maker base
Mains restraining clamp K type 63-250mm, 3 way
3 way adaptor kit for 2 way K type clamp
089-000348
089-000327
089-000349
089-000165
089-000350
500mm, 2 way
500mm, 2 way c/w angle
maker base
089-000351
089-000352
Mains positioning clamp Vee type 63-500mm, 2 way,
straight base
Mains positioning clamp Vee type 63-500mm, 2 way
c/w angle maker base
Mains positioning clamp Vee type 63-500mm, 3 way
3 way adaptor kit for 2 way Vee type clamp
Large Diameter Hydraulic Restraining Clamp
Hydraulic Positioning Kit
Hydraulically powered re-rounding and positioning units for supporting and
restraining large diameter pipes and couplers throughout the electrofusion
jointing process.
Product code
Description
089-000337
604-000010
604-000011
089-000338
604-000012
604-000013
089-000339
604-000014
604-000015
089-000340
Hydraulic positioning kit 400mm
Reducing shell set 400-355mm (per end)
Hydraulic Restraining Clamp
11
Available to Hire
Eq ui p ment
& To o lin g
Top Loading Clamps
TLC250, TLC315 & TLC400 Pillar Type; Top Loading Clamp
The Hy-Ram Pillar Clamps locate in the 12mm Hexagonal drive on the cutter of
the tapping saddle. Robust design incorporates a correct load indicator and a
‘swivel’ vee base for pipe location.
(For saddles without an integral cutter, an Adaptor is available)
Branch Saddle
Adaptor
Product code
Description
Size Diameter Range
089-000429 TLC 250
Up to 250mm dia. pipe
089-000430 TLC315
Up to 315mm dia. pipe
089-000431 TLC400
Up to 400mm dia pipe
089-000343 Adaptor
63, 90mm Branch Saddles
089-000344 Adaptor
63, 90, 125mm Branch Saddles
* Important: Top Loading Clamps should be periodically calibrated in line with
manufacturers’ recommendations. Refer to Hy-Ram Portable Saddle Clamp tester for
more information see below.
TLC500 Strap Type; Top Loading Clamp
The Hy-Ram Strap Clamp locates in the 12mm Hexagonal drive on the cutter of
the tapping saddle and is especially useful where trench space is tight.
For any size of pipe (up to 500mm diameter).
TLC Pillar Type
(For saddles without an integral cutter, an Adaptor is available)
Branch Saddle
Adaptor
Product code
Description
Size Diameter Range
089-000432 TLC 500 (Strap type) Up to 500mm dia. pipe
089-000343 Adaptor
63, 90mm Branch Saddles
089-000344 Adaptor
63, 90, 125mm Branch Saddles
* Important: Top Loading Clamps should be periodically calibrated in line with
manufacturers’ recommendations. Refer to Hy-Ram Portable Saddle Clamp Tester for
more information see below.
TLC 500 Strap Type
Portable Saddle Clamp Tester
Hy-Ram developed portable Calibration / Test Unit for ensuring that Top Loading
Pillar Clamps and Strap Type Clamps for Electrofusing Tapping Tees are applying
the correct load in compliance with the relevant Gas Industry Specification (GIS).
Portable Saddle
Clamp Tester
Being battery operated for ‘field’ use, the Hy-Ram Portable Saddle Clamp Tester
is supplied in a bespoke plastic carry-case and can be used to recalibrate any
manufacture of Clamp.
Product code
Description
189-000019
Portable Saddle Clamp Tester
Electrofusion Preparation
Alcohol Wipes
Alcohol wipes are used for removing dirt and grease on a pipe spigot prior to
electrofusion. These specialised wipes are impregnated with a high specification
solution containing either 70% or 90% Isopropyl Alcohol.
Alcohol Wipes
(90%)
Alcohol Wipes
(70%)
T:
01623 422982
F:
01623 661022
E:
Product code
Description
700-000022
700-000069
Alcohol Wipes 70% (Tub of 100)
Alcohol Wipes 90% (Tub of 100)
[email protected]
W:
www.hyram.com
12
Scrapers
Hand Scrapers
Robust and easy to use hand tools for manual scraping of PE pipe prior to
electrofusion.
Harris Scraper
Spare Blades
Product code
Description
700-000001
Harris Scraper 1 ½” Width
700-000002
Harris Scraper 2 ½” Width
041-000001
Harris Scraper Blade 1 ½” Width (pack of 2)
041-000002
Harris Scraper Blade 2 ½” (pack of 2)
Uniprep Scraper
Manually operated mechanical rotary scraping tool for removal of the outer
surface of PE pipe. Uniprep scrapers incorporate a hardened blade and give a
controlled depth of cut. Available for pipe sizes between 63 and 710mm.
Product code
Description
700-000003
700-000061
700-000062
700-000063
700-000064
Uniprep 1 Mechanical Pipe Scraper 90-400mm
Uniprep 5 Double Length Mechanical Scraper 500-730mm
(Inc. Box)
041-000022 Cutting Blade - 4 tipped for Uniprep 1,2,3 & 5
041-000037 Single Edge Blade for Uniprep 4
225mm
Blade
Uniprep
Uniprep Blade
(for 1,2,3 & 5
models)
Profuse Scraper
For the removal of the protective skin on High Performance PE100 pipe.
Adjustable for up to 630mm pipe.
Profuse Scraper Aluminium
Profuse Scraper Black Plastic
Product code
Description
Spare Blade Part Code
700-000082
700-000136
Profuse Scraper - Aluminium
Profuse Scraper – Black Plastic
041-000068
n/a
Endprep Plus Rotary Scraping Tool Kit
Endprep tool with interchangeable mandrils for Ø 20, 25, 32, 63mm SDR 11 PE
pipe.
Endprep Plus Kit
Product code
Description
700-000094
041-000063
20, 25, 32, 63mm Endprep Plus Rotary Scraping Kit
Replacement Cutting Blade for Endprep Rotary Scraping
Tools
Endprep Rotary Scraping Tool
Manually-powered rotary scraping tool for the removal of the outer surface of
PE pipes prior to electrofusion. Available in one tool per pipe/pipe-wall size, from
20mm to 63mm outside diameter.
Endprep Tool
13
Product code
Description
700-000089
700-000066
700-000067
700-000080
700-000081
041-000062
20mm Ø pipe x SDR 11 wall
50mm Ø pipe x 4.6mm wall
63mm Ø pipe x 5.8mm wall
Replacement Cutting Blade for Endprep Rotary Scraping Tools
Available to Hire
Eq ui p ment
& To o lin g
Scrapers
Protecta-Line Scraper
For scraping and preparing Protecta-Line pipe for electrofusion jointing.
Protecta-Line Scrapers
Product code
Description
700-000107
700-000108
700-000109
700-000111
300-000210
300-000211
300-000212
300-000213
300-000214
300-000215
300-000216
041-000061
Protecta-line scraper kit 90-110mm
Protecta-line scraper kit 125, 160 & 180mm
Protecta-line Tool (small) 32-110mm with cutting tip
Protecta-line Tool (large) 125-180mm with cutting tip
Pipe Adapter Mandril 25mm
Pipe Adaptor Mandril Expander Type 90-110mm
Pipe Adaptor Mandril Expander Type 125mm
Adaptor Shells 160mm for 125mm Expander Mandril
Adaptor Shells 180mm for 125mm Expander Mandril
Replacement blade for Protecta-line Scraper
700-000142
700-000143
041-000087
Surprep Puriton Kit 90-110mm
Surprep Puriton Kit 125-160-180mm
Puriton Blade
Universal Patch Scraping Tool
For the scraping of Polyethelyne pipes prior the electrofusion welding of saddles.
Reciprocating action for minimal excavation.
Scrape area
Single Tool
200mm x 150 mm
Double Tool
280mm x 250mm/200mm x 150 mm
Product code
Description
700-000140
700-000141
Patch Scraping tool 200 x 150mm c/w steel box, no chains
Patch Scraping tool (Double) 280 x 250mm, 200x150mm
c/w steel box, no chains
Set of Chains 650mm (75 to 180mm OD)
Set of Chains 1000mm (125 to 315mm OD)
079-000020
079-000021
Cutter Drive Keys
Cutter drive keys for Electrofusion self-tapping saddles (12mm Hexagon drive).
Product code
Description
270-000005
Cutter Drive Key
GF Cutter Drive Key
Assembly and Tapping Key for Georg Fischer ELGEF Plus Saddles
Product code
Cutter Drive Key 12mm
GF Cutter Drive Key 17mm
T:
F:
01623 422982
01623 661022
Description
270-000138
17mm Hex Drive Key
GEOR799198047 GF Cutter Drive Key
E:
[email protected]
W:
www.hyram.com
14
Ancillary
Equipment
Hy-Ram has the full package of ancillary equipment needed to accompany piping
operations on site. Available for Sale and Hire; Hy-Ram offer; generators, pipe rollers, pipe
buggies, pipe coil trailers, shelters and so on. Call our Sales Office for no obligation help
and advice for your specific requirements.
Generators
Designed with the water and gas industries in mind, a range of TIN12 specification generators suitable for use with Butt Fusion machines and
Electrofusion boxes is available.
UIS Power Push
POWER
POW
PUSH
USHTM
PIPE
PUSHER
LEV
VEL
HEADTM
HEA
ATTACHMENT
PIPE
ENTRYTM
GUIDE
COLLAR
15
Small Model – 55mm > 180mm
Large Model – 200mm > 400mm
A new fast and safer method of inserting Gas and Water polyethylene pipe and
cables in existing metallic pipe and ducts. The UIS Power Push™ is an excavator
attachment that allows for a faster, more economic, safe and more compliant
way to insert polyethylene pipe and cable.
Key benefits…
o Simple installation and mounting of attachment
o Can be utilised to align pipe / cable in preparation for connections
o Can be utilised to re-round pipe to correct ovality and imperfections of pipe / cable
o Avoids the risk of stretching hence no ‘relaxation’ period required before
joining pipe
o No hazardous winching operations
o Long sections can be inserted in one operation
o Correction / re-rounding of pipe prior to entry in carrier pipe
o No need for winches / cobra or addition towing to site
o Action can be reversed to pull pipe back if an obstruction is met
o Shim inserts are manufactured and fitted to accommodate different pipe
diameters
o Standard excavator and hydraulic pipe mounting (suitable with most modern
manufacturers)
UIS Level Head
Historically there have been a number of serious personal injuries / near
misses associated with the handling and manipulation of coiled pipe during
insertion activities. One of the major difficulties encountered whilst pushing /
inserting and winching pipe is when the new main comes into an open service
/ connection excavation pit. Due to the P.E. pipe being coiled, this has stored
energy resulting in the pipe naturally springing upwards. The UIS Level Head™
resolves this problem with ease and is simple to install.
UIS Pipe Entry Guide
A common occurrence whilst inserting pipe through pushing or winching is that
the new P.E. main catches the original host main, therefore scraping the pipe as
it enters. With the UIS Pipe Entry Guide™, this problem is eradicated. The UIS Pipe
Entry Guide™ is a low-cost, lightweight and easy fit solution to solving the problems
incurred while inserting P.E. pipe into cast / spun / ductile iron or steel mains.
Available to Hire
Eq ui p ment
& To o lin g
UIS MBA
A new innovative method of breaking and removing a section of existing pipe,
without the health and safety risks associated with using a sledge hammer,
breaking bar or other impact type equipment.
Features…
o The Standard MBA™ (2-8” pipe) & Mid-Range MBA™ (2-6” pipe) models
are attachments that fit onto an excavator in place of the bucket, and are
hydraulically operated from inside the cab of the excavator
o The Mini Portable MBA™ (2-4” pipe) is powered by a Handpump and operated
manually rather than attached to an excavator
MBATM
MAINS
BREAKING
ATTACHMENT
Pipe Puller
For pulling together all types of gasketed joints on plastic, cast iron and concrete
pipes. Complete with two 12 ft. long anchor chains.
One man with one puller can normally handle up to 14” diameter pipe, two men
with two pullers can handle larger sizes depending on conditions.
Pipe Puller
Product code
Description
WHE4012
4 to 14 inch, (100 – 350mm) diameter
Pipe Rollers
Various sizes of pipe rollers are available to suit differing pipe diameters and site
conditions.
315 Roller
Product code
Description
681-000002
681-000010
681-000011
Pipe Roller <315mm
Pipe Roller 63-400mm, Height Adjustable
Pipe Roller 400-630mm, Height Adjustable
400
Roller
630 Roller
External Debeaders
External Debeading tools are used to remove the outer bead that is formed by
the Butt Fusion process.
External Debeader
Spare Blade
T:
01623 422982
F:
01623 661022
E:
Product code
Description
700-000101
700-000006
700-000085
700-000103
700-000105
700-000029
700-000137
700-000104
125mm External Debeader
90-400mm External Debeader (25mm Max Bead Width)
400-630mm External Debeader (35mm Max Bead Width)
900mm External Debeader (40mm Max Bead Width)
Blade to suit 125mm External Debeader
Blade to suit 90-400mm External Debeader
Blade to suit 400-630mm External Debeader
Blade to suit 900mm External Debeader
[email protected]
W:
www.hyram.com
16
Welding Shelters
A
Shelters
A complete range of flame retardant tents and shelters used for both Butt and
Electrofusion welding to keep contaminants such as rain, pollen, dust and any other
floating debris, away from the welding area.
Welding Umbrellas...
B
Product
code
C
Description
Colour
Frame
Size
Shaft
Flame
Retardant
A
D
G
E
F
H
J
Product code
047-000120 Welding
White
Metal
2.0m
Non Conductive Yes
Umbrella
Diameter Fibreglass
B 047-000121 Welding
Translucent Non Conductive 2.5m
Non Conductive Yes
Umbrella
PVC
Fibreglass
Diameter Fibreglass
C 047-000061 Welding
White
Metal
2.0m
Non Conductive Yes
Umbrella c/w
Diameter Fibreglass
Skirt
D 047-000115 Welding
Translucent Non Conductive 2.5m
Non Conductive Yes
Umbrella c/w
PVC
Fibreglass
Diameter Fibreglass
Skirt
Please note due to the vast range of umbrellas not all products available are featured. Please
discuss you needs with our Sales Office.
K
I
Welding Tents...
Available in pop-up, pole type or concertina type. Optional extras are available including;
o Company logos
o Windows made from translucent PVC
o Different colour covers
o Internal straps
o Side vents
o Rubber feet
o Heavy duty carry bags
o Variable door configurations
L
Description
Colour
Material
Frame
L(m) W(m) H(m) Flame
Retardant
E 047-000050
Service Laying
White
PE
Pop up Fibreglass
1.8 1.8
F 047-000053
Budget Mains Laying Tent
White & Yellow
PU Coated Nylon
Pop up Fibreglass
1.8 1.8
G 047-000116
Mains Laying Tent
White
PU Coated Polyester
Pop up Fibreglass
2
2
H 047-000111
Heavy Duty Mains Laying Tent
White & Yellow
8oz PU Coated Polyester
Pop up Fibreglass
1.8 1.8
I
047-000117
Premium Main Laying
Translucent
PVC
Pop up Fibreglass
1.8 1.8
J
047-000058
Site Tent
Translucent
PVC
Poles Aluminium
1.8 1.8
K 047-000119
Heavy Duty Site Tent
White
PVC
Poles Aluminium
1.8 1.8
L 047-000118
Heavy Duty Jumbo Tent
White & Blue
PVC Coated Polyester
Concertina Aluminium 3
3
Please note due to the vast range of tents not all products available are featured. Please discuss you needs with our Sales Office.
PE Pipe
Squeeze Off
1.7
1.8
2
1.8
1.8
2.3
2.3
3
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Hy-Ram has been at the leading edge of Squeeze Off innovation and manufacture for
over twenty years. Our range is the largest in the UK offering Squeeze equipment from
16mm to 500mm diameter.
Hy-Ram offer a complete repair service for any squeeze off equipment…
refer to page 77 for more details.
Squeeze Tools
Mini Sou
Mini Squeeze Off Tool
Pipe range: 16 – 32mm diameter
Mini SOU Features…
The Mini SOU is used to limit the flow in PE pipe. Squeeze off is affected by
manually turning the handle in a clockwise direction.
Mini SOU
17
Product code
Description
089-000059
Mini Squeeze Off Unit
Available to Hire
Eq ui p ment
& To o lin g
SOU32, SOU63, SOU63HF, SOU125
SOU32, SOU63, SOU63HF, SOU125 Squeeze Off Tool
These tools are used to limit the flow in PE pipe. Different diameters can be
accommodated by using the appropriate ‘Pipe stop’ setting to ensure the optimum
‘squeeze gap’.
Product code
Description
Pipe Stops - diameter (mm)
SDR
SOU32 Squeeze Off Unit
16, 20, 25, 32
20, 25, 32, 63
SOU63HF Squeeze Off Unit
20, 25, 32, 40, 50, 63
11
716-000173
Pipe Stop (pair) for SOU63HF 20, 25, 32, 40, 50, 63
11
716-000174
Pipe Stop(pair) for SOU63HF
20, 25, 32, 40, 50, 63
17
089-000187
089-000397
63, 75, 90
90, 110 125
63, 75, 90, 110, 125
11
17.6
21
63, 75, 90
90, 110 125
40,50,63,75,90,125
11
17.6
21
SOU32
089-000053
SOU32
(16 - 32mm dia.)
SOU63
SOU63
(20 - 63mm dia.)
089-000052
SOU63HF
089-000241
SOU63 HF Spare Pipe Stops
SOU125
SOU125 Spare Pipe Stops
SOU63HF
(20 - 63mm dia.)
SOU125 (63 - 125mm dia.)
716-000089
Pipe Stop(pair) for SOU125
716-000168
Pipe Stop(pair) for SOU125
SOU180
SOU180 – Hydraulic Squeeze Off Tool
SOU180 Features…
This unit has an integral hydraulic jack enabling a maximum squeeze off force of
15 tonnes.
The unit is fitted with safety check screws to prevent accidental release and also
incorporates a jack spring return mechanism. ‘Pipe stops’ are used on the unit for
each diameter/SDR combination thus ensuring the optimum ‘Squeeze gap’.
Product code
SOU180
Description
Pipe Stops - diameter (mm)
089-000054 SOU180 Squeeze Off Unit 63, 75, 90, 125, 180 SDR11
125, 180 SDR17.6
SOU180 Spare ‘Pipe stops’…
Product code
Description
Pipe Stops - Diameter/SDR
716-000021 Pipe Stop(pair) for SOU180
63/11, 75/11, 90/11, 125/11, 180/11, 125/17.6,180/17.6
110/11, 140/11, 110/17.6, 140/17.6, 160/17.6
63/11, 90/11, 110/11, 160/11, 90/17.6, 110/17.6, 160/17.6
63/11, 90/11, 110/11, 125/11, 160/11, 180/11
63/11, 75/11, 90/11, 110/11, 125/11, 140/11,160/11,180/11
63/17.6, 75/17.6, 90/17.6, 110/17.6, 125/17.6, 140/17.6, 160/17.6, 180/17.6
63/21, 75/21, 90/21, 110/21, 125/21, 140/21, 160/21, 180/21
90/11, 125/11, 180/11, 90/17.6, 125/17.6, 180/17.6
T:
01623 422982
F:
01623 661022
E:
[email protected]
W:
www.hyram.com
18
SOU200
SOU200 – Hydraulic Squeeze Off Tool
Pipe range 63-200mm Diameter
SOU200 Features…
This unit has an integral hydraulic jack enabling a maximum squeeze off force of 15
tonnes.
The unit is fitted with safety check screws to prevent accidental release and also
incorporates a jack spring return mechanism. ‘Pipe stops’ are used on the unit for
each diameter/SDR combination thus ensuring the optimum ‘Squeeze gap’.
SOU200
Product code
Description
Pipe Stops - Diameter/SDR
089-000312
SOU200 Squeeze Off Unit See table below
Stops included
Product code
Description
Pipe Stops - Diameter (mm)
716-000175
SOU 200 9 STATION STOP SDR11
63, 75, 90, 110, 125, 140, 160, 180, 200
716-000176
SOU 200 9 STATION STOP SDR17.6
63, 75, 90, 110, 125, 140, 160, 180, 200
SOU 250
SOU250 – Hydraulic Squeeze Off Unit
Gas pipe Squeeze Off unit with pioneering ‘A’ Frame design that is extremely
lightweight yet very robust for ‘in-trench’ conditions... the Frame folds and can be
locked ‘flat’ for ease of carrying and transportation.
SOU250 with
pneumatic
input / hydraulic
output power
unit
The principle of operation is that the squeeze is carried out, the Top and Bottom
beams are then mechanically locked together and then the ‘A’ Frame is detatched
and used in conjunction with a second beam set. Using this concept all four squeeze
points are accomplished using just one ‘A’ Frame assembly and one Power Unit.
Available in two options... as shown, with a pneumatic input / hydraulic output
power unit or with a hydraulic hand-pump in lieu of the power unit and ‘spring
return’ hydraulic cylinder.
The Top Squeeze beam is fitted with ‘Pipe Stops’ to suit the diameter and wall
thickness (SDR) of the pipe to be squeezed.
Product code
Qty
089-000095
089-000055
Pipe Stops
Description
SOU 250 Manual Squeeze Off Tool (Handpump)
SOU 250 Auto Hydraulic Squeeze Off Tool
(Power Unit)
Kit Includes
1
4
4
1
‘A’ Frame
Top Beam Assembly (incorporating Pipe Stops)
Bottom Beam Assembly
Power Unit (Handpump not shown)
Pipe Stops – SOU250
A set consists of 8 x Stops. Each Stop can be rotated through 180˚ thus giving 2 x Diameter / SDR combinations. Stops can be custom made for
any specified pipe. Codes as follows are for individual Stops.
Product code
Description
716-000036 125/11 and 90/11
716-000158 225/21 and 225/17.6
716-000049 250/17.6 and 200/17.6
716-000064 200/11 and 180/11
716-000008 250/11 and 180/11
716-000020 250/17.6 and 225/17.6
716-000065 200/17.6 and 180/17.6
716-000048 250/11 and 200/11
716-000159 250/21 and 225/11
716-000015 213/17.6 and 180/17.6
716-000033 250/11 and 225/11
716-000032 200/21 and 250/17.6
716-000057 225/11 and 180/11
716-000062 250/11 and 250/17.6
716-000055 250/21 and 250/17.6
716-000034 225/17.6 and 180/17.6
716-000014 250/17.6 and 180/17.6
716-000160 250/26 and 225/17.6
Other sizes available on request
19
Available to Hire
Eq ui p ment
& To o lin g
SOU400
Gas pipe Squeeze Off unit, the principle is the same as that of the SOU250...
the squeeze is carried out, the Top and Bottom beams are then mechanically
locked together and then the hydraulic cylinders are ‘unclipped’ and used in
conjunction with a second beam set. Using this concept all four squeeze points
are accomplished using just one pair of hydraulic cylinders.
The Bottom Squeeze beam is fitted with ‘Pipe Stops’. These Pipe stops form a
positive ‘stop’ between the Top and Bottom beams and hence optimise the
squeeze gap in order to ensure the pipe is not over-squeezed.
Product code
Qty
089-000073
Kit Includes
Description
SOU 400 Auto Hydraulic Squeeze Off Tool
2
4
4
1
Hydraulic Cylinders
Top Beam Assembly
Bottom Beam Assembly
Power Unit (pneumatic input/hydraulic output)
A set consists of 8 x Stops. Each Stop is unique for a fixed Diameter / SDR
combination. Stops can be custom made for any specified pipe.
Pipe OD
Pipe Stops
SDR 11
SDR 17.6
SDR 21 *
SDR 26 *
250
716-000006
n/a
716-000121
716-000120
268
n/a
n/a
n/a
716-000165
280
716-000081
716-000082
716-000123
716-000122
315
716-000002
716-000007
716-000125
716-000124
355
716-000003
716-000005
716-000127
716-000126
400
716-000001
716-000004
716-000129
716-000128
*Please note these sizes are for use with Mk1A Squeeze Off Units. Units issued with
red guide tubes (as pictured) are capable of using these size stops. Please contact our
technical department for further information.
Guide Tubes
SOU500
Pipe range 315-500mm diameter
Gas pipe Squeeze Off unit featuring a detachable Top beam with integrated
hydraulic cylinders, an intermediate beam and a Bottom beam.
As with other Hy-Ram designs, the squeeze off is carried out, the intermediate
and Bottom beams are mechanically locked together and then the Top beam
complete with the cylinders can be detached for use on the second, third and
fourth squeeze points.
SOU 500 Unit
Product code
Description
089-000148
SOU 500 Hydraulic Squeeze Off Tool
A set consists of 8 x Stops. Each Stop is unique for a fixed Diameter / SDR
combination. Stops can be custom made for any specified pipe.
Pipe OD
315mm
716-000119
355mm
716-000115
400mm
716-000111
450mm
716-000107
469mm
716-000103
500mm
716-000099
Other sizes available on request
Storage & Transport Skids
Pipe being
squeezed off
T:
01623 422982
F:
01623 661022
SDR 11
E:
SDR 17.6
SDR 21
SDR 26
716-000118
716-000114
716-000110
716-000106
716-000102
716-000030
716-000117
716-000113
716-000109
716-000105
716-000101
716-000078
716-000116
716-000112
716-000108
716-000104
716-000100
716-000096
[email protected]
W:
www.hyram.com
20
SOU Controlled Release
SOU400 – ‘Controlled Release’ Hydraulic Squeeze Off Unit
Pipe range: 250-400mm Diameter, PE100, 7 Bar
At the request of Transco (British Gas), Hy-Ram has developed a ‘special’ gas pipe
Squeeze Off unit for use on PE100 / SDR11 pipe at pressures up to 7 bar. Designed
specifically for this application, the ‘controlled release’ technique showed benefits over
conventional squeeze off in terms of reducing the risk of pipe damage, specifically crack
propagation on release of squeeze. Tests were carried out by Transco up to 315mm
diameter, however the unit has been designed to enable 400mm pipe to be installed.
Facilitates 4 simultaneous squeeze points.‘Pipe Stops’ are used to suit the diameter and
wall thickness (SDR) of the pipe.
Product code
Description
089-000159
SOU 400 Hydraulic Squeeze Off Tool Slow Release
Pipe Stops – ‘Controlled Release’
A set consists of 8 x Stops, each Stop is unique for a fixed Diameter / SDR combination.
Stops can be custom made for any specified pipe. Codes as
follows are for individual stops.
Pipe OD
SDR 11
SDR 17.6
SDR21
SDR26
250 Stop Set
280 Stop Set
716-000039
n/a
716-000038
n/a
716-000076
n/a
n/a
716-000166
315 Stop Set
355 Stop Set
400 Stop Set
716-000041
716-000043
716-000045
716-000040
716-000042
716-000044
716-000075
716-000074
716-000073
716-000069
n/a
n/a
Ancillary Squeeze Off Equipment
Re-rounding Tools
Post Squeeze Off Re-rounding Clamps
Hy-Ram post squeeze off re-rounding clamps are designed to aid re-rounding of
PE pipe after a “squeeze off” has been carried out.
Post Squeeze Rerounders
Product code
Pipe Size
Description
089-000290
63mm
Post Squeeze-off Re-rounding Clamp
089-000291
089-000292
089-000296
089-000293
089-000297
089-000298
089-000294
089-000299
089-000300
089-000295
75mm
90mm
110mm
125mm
140mm
160mm
180mm
200mm
225mm
250mm
Universal Post-Squeeze Re-rounding Tool…
This tool is universal for a range of diameters.
Universal Post
Squeeze Rerounders
Product code
Description
089-000398
089-000399
089-000400
673-000007
63 - 90mm Uni-Post-Squeeze Re-Rounder
63, 75
110 - 180mm Uni-Post-Squeeze Re-Rounder 110, 125, 140, 160
180 - 250mm Uni-Post-Squeeze Re-Rounder 180, 200, 225
24 - 30mm Podger Spanner
Liners - Dia. (mm)
Squeeze Off Tape
Squeeze Off Tape
21
Squeeze Off Applied Marker Tape
Identifies when PE pipe has been squeezed and helps prevent re-squeeze.
Product code
Description
729-000001
Squeeze Off Applied Marker Tape
Available to Hire
Eq ui p ment
& To o lin g
Hy-Ram offer a full range of Pipe Cutting equipment for most site applications up to a
maximum diameter of 1500mm.
Hy-Ram offer a complete repair service for any manufacture of pipe cutting
equipment… refer to page 77 for more details.
Pipe Cutting
Plastic Pipe Cutters
Secateurs
Hy-Ram offer a range of Secateurs from stock for cutting plastic pipes up to a maximum
of 63mm diameter.
A
B
C
Product code
Pipe Size Range
Description
A
117-000014
6 – 42mm
PE Pipe Cutter, ratchet action, plastic coated
handles, suitable for cutting plastic pipe.
C
117-000190
6 – 42mm
PE Pipe Cutter, HEAVY DUTY, ratchet action, plastic
coated handles, suitable for cutting plastic pipe.
C
117-000015
3 – 63mm
PE Pipe Cutter, ratchet action, suitable for cutting
plastic pipe.
Plastic Pipe Cutter
Facilitates fast precision cutting of all thick wall plastic tubing with spring loaded action
for fast adjustment from size to size.
Plastic Pipe
Cutters
Product code
Pipe Size Range
Max Depth of Cut
Description
Spare Wheel
Product Code
117-000143
6 - 67mm
7mm
Pipe Cutter
117-000146
117-000144
50 - 125mm
13mm
Pipe Cutter
117-000147
117-000145
110 - 168mm
16mm
Pipe Cutter
117-000148
Guillotine Cutters
Hy-Ram is a UK agent for the Virax range of Pipe Cutting equipment including Guillotine
Cutters.
The Guillotines achieve a straight, square cut with minimal blade wear. Blades are easy to
sharpen or replace.
Virax Guillotine
o Practical, fast opening
o Maximum wall thickness 18mm
o Ground Stainless Steel Blade
o Square drive 14 mm (models 125 and 225) or 17 mm (model 315) across flats. A
wrench or extension can be used for cutting pipes in deep trenches. Releasing the
catch on the hinged lower V-shaped jaw allows the cutter to be positioned anywhere
along the pipe.
Product code
Pipe size max.
OD mm
Description
Weight
Spare Blade
Product Code
117-000081
125
VIRAX Guillotine Cutter
7.5kg
041-000023
117-000030
225
VIRAX Guillotine Cutter
17kg
041-000015
117-000071
315
VIRAX Guillotine Cutter 68kg
(Not suitable for SDR11)
041-000021
Virax Guillotine
T:
01623 422982
F:
01623 661022
E:
[email protected]
W:
www.hyram.com
22
Metallic Pipe Cutters
Copper Tube Cutters
Pipe Slice
Single action copper tube cutter for use in tight locations
Copper Pipe Slice
Product code
Pipe Size
Description
Spare Wheel
Product Code
117-000104
117-000105
117-000192
15mm
22mm
28mm
Copper Pipe Slice
Copper Pipe Slice
Copper Pipe Slice
117-000165
117-000165
117-000165
Ridgid 246
Used mainly for cutting 4” cast iron pipe, this cutter is quick and convenient to
use and requires minimal clearance around the pipe.
Product code
RIDG246
Description
Ridgid 246 Pipe Cutter
Concrete pipe
4”-6”
Clay pipe
1½ “-6”
Class 22 water main
4”
Extra heavy-duty cast iron soil pipe
Ridgid 246
2”-5”
Service weight cast iron soil pipe
1½”-6”
No hub cast iron soil pipe
1½ “-6”
Hinged Cutters
The Hy-Ram Hinged Pipe Cutting Tools are designed to safely cut metallic pipe
with minimal clearance around the pipe. They will cut ductile, cast iron, stainless
steel and heavy wall steel pipe by applying manual pressure to the feed screw
whilst rotating the unit to and fro through 90˚.
Features…
o Features four wheels to cut steel, stainless steel, cast and ductile iron with only
90° to 110° handle swing
o Only 4” clearance is required around pipe
o Wheels and pins are interchangeable with other makes of Hinged Cutters
Hinged Cutter
Spare - Wheels and Pins
23
Product code
Pipe size
max. range
Description
Pin
Product Code
Wheel
Product code
117-000111
117-000001
117-000002
1-2 ½”
2 ½ - 4”
4 – 6”
Hinged Cutter
Hinged Cutter
Hinged Cutter
520-000020
520-000009/A
520-000012
117-000016
117-000006
117-000005
117-000003
117-000004
6 – 8”
8 – 12”
Hinged Cutter
Hinged Cutter
520-000012
520-000012
117-000005
117-000005
Available to Hire
Eq ui p ment
& To o lin g
Wheeler-Rex Pipe Crackers
Exclusive UK distributor…
Hy-Ram are the sole official UK agent for the Wheeler-Rex range of pipe cutting
equipment including the unique range of Hydraulic Pipe Crackers for cast iron
and concrete pipes.
These cutters are not rotated around the pipe, the application is static, the chain is
hydraulically tensioned around the pipe until the point of cracking. Minimal clearance
is required to wrap the cutter chain around the pipe to engage it in the cutter jaws.
Cutters are supplied complete with hand-pump, hose and storage / carrying box.
Benefits:
o Three models available; Model 2990, 3890 and 5590
o Ideal for cutting cast iron, tile and A/C
o Remote hydraulic hand-pump for ease and safety
o Only requires clearance of 2” – 3” around the pipe
WHE559018
WHE389012
F:
Wheeler Hydraulic Pipe Cutter (2”- 8”)
01623 661022
E:
Asbestos
Cement
Concrete
Soil Pipe (Clay)
Spun Iron Class D
Spun Iron Class C
Spun Iron Class B
Cast Iron Class D
Cast Iron Class C
Cast Iron Class B
Cast Iron Class A
Size/Type of Pipe
Pipe size max. range
Chain extension for WHE389012 (12” to 15”)
01623 422982
Pipe size max. range
WHE299008
WHE389012
WHE559018
WHE559024
RECOMMENDED CAPACITIES FOR WHEELER-REX CUTTERS
Product code
WHE382515
WHE382518
WHE382520
WHE382524
WHE552520
WHE552524
T:
Product code
2”
3”
4”
5”
6”
8”
10”
12”
14”
15”
16”
18”
20”
24”
[email protected]
W:
www.hyram.com
24
WACHS Cutter
Trav-L-Cutter
Secured by its tensioning chain, the Trav-L-Cutter can be mounted on horizontal
or vertical pipe and even used under water. To ensure accurate cuts the Trav-LCutters’ self-propelled chain drive system maintains continuous out-of-round
compensation while providing positive drive under all conditions.
Features:
o Available in both Hydraulic (HE Model) or Pneumatic (E Model) power options
o Low-profile design needs only 10” to 12” of clearance
o Can be used in explosive conditions
o High-speed milling cutters remove approximately 5mm of metal while cutting,
leaving the pipe end with a machined finish
o Any type of weld prep detail can be achieved from a common 30° or 37.5°
bevel to multiple-angle J bevels, with counter bore and taper
o Use of the accessory Guide Track and special wheels allows cutting with
machine-shop accuracy even in zero-visibility situations
Trav-L-Cutter
Capacity:
Clearance:
Weight:
Dimensions:
Hose Assemblies:
Hydraulic Power Sources (Model HE):
6” thru 72” (153 to 1829 mm) pipe, large diameter vessels - All schedules
10” to 12” (254 to 305 mm) radial, depending on pipe diameter. 20” axial (508 mm)
Operating – 98 Kg
Length: 24” (61 cm) / Width: 20” (51 cm) / Height: 10-¾” (28 cm)
5
⁄8” hose sets with quick couplers, in 45’ lengths
Electric, Petrol or Diesel Engine driven
Multipurpose Pipe Cutters
FEIN
Powered Hacksaw
Compressed air hacksaw for pipes and profiled sections up to 440mm diameter.
Product code
Pipe size range
117-000196 Up to 440mm
diameter
605-000019 n/a
Description
Spare Blade Product Code
Powered Hacksaw (Fein), ‘Starter pack’ includes: 1 x set of
keys, 1 x additional handle and 1 x hose coupling
Oiler / Lubricator
A variety of blades are available depending
on pipe material… please enquire.
n/a
Carbide Coated Blades
For use on concrete pipes
Part Code
Blade
041-000081
041-000082
041-000083
041-000084
041-000085
300mm long
400mm long
500mm long
600mm long
700mm long
TD Blades
For ductile & Cast iron pipes with cement mortar lining
Part Code
Blade
041-000046 320mm long, for pipes 80-150mm OD
041-000045 490mm long, for pipes 80-300mm OD
25
Benefits:
o Cuts steel, cast iron, ductile iron, concrete, plastics
o Ideally suited for cutting pipes and shaped sections
o Clamp and feed device available for profiles and pipes from 80 – 400mm
diameter
o Adjustable clamping devices permit mitre cuts up to 45˚.
Saw Blades
Hy-Ram offers a wide range of saw blades to suit Powered Hacksaws
HSS & HSS-SL Blades
HSS Standard
Part No.
HSS - SL To
suit Hard
Metals Part
No.
Blade
041-000051
041-000052
041-000053
041-000054
041-000071
041-000055
041-000074
041-000075
041-000076
041-000077
041-000078
041-000079
8" Long (200mm) to cut 3" dia. Pipe
12" Long (300mm) to cut 6 3/4" dia Pipe
041-000072 041-000080 31" Long (770mm) to cut 25" dia Pipe
041-000073 n/a
Available to Hire
37" Long (940mm) to cut 32" dia Plastic Pipe
Eq ui p ment
& To o lin g
Keel Cutter N450 and N600
Keel Hydraulic Pipe Cutters
Hy-Ram is an official distributor for KEEL. The KEEL range of pipe cutters consists
of two models; Model N450 (75 to 900mm diameter pipe) and Model N600 (100
to 1500mm diameter pipe).
The cutters can be used to cut virtually any pipe material… steel, cast iron, ductile
iron, clay and plastic pipe. The cutters are powered from a portable hydraulic
power unit and so are ideal for on-site use.
The cutter blade is carefully lowered into the pipe wall, the drive is engaged and the
cutter automatically tracks around the pipe cutting through the pipe wall as it travels.
Feature
For use on the following pipe materials:
Maximum Outside Diameter of Pipe:
Clearance required around pipe (min):
Approx cutting speed (circumferential):
Max. wall thickness of pipe:
Capacity to do ‘straight’ cuts:
Capacity to Bevel:
Coolant requirement:
Model N450
Model N600
Cast Iron, Ductile iron, Cement, Plastic
& Steel
700mm (900mm with additional
chain extension)
200mm
80 - 140mm / minute
1¼”
Yes
Yes (with additional attachment)
Water spray at all times (oil and water
mix with steel pipes)
Yes
& Steel
Hydraulic drive:
Window Cutting attachment to allow the cutter to be
capable of cutting both circumferential and longitudinal cuts Yes
in order to effectively cut a ‘window’.
1500mm
260mm
80mm / minute
2”
Yes
Yes (with additional attachment)
Water spray at all times (oil and water
mix with steel pipes)
Yes
Not available
Hydraulic Power Pack:
Product code
Description
954-000004 Hydraulic Power Pack for Keel N450
Blade N450:
Product Code
Description
Max. wall
Pipe materials
thickness of pipe
117-000059
117-000054
041-000018
5”/125mm Diamond Blade
6”/150mm Diamond Blade
5”/125mm TCT Blade
¾”
1¼”
¾”
Steel
Model N600 Pipe Cutter & Accessories
N600 Keel Hydraulic Cutter Kit contains:
Product code
Description
117-000090
N600 Pipe Cutter (200-1500mm)
Required Hydraulic Power Pack:
Product code
Description
954-000008
Hydraulic Power Pack for Keel N600
Blades:
Product Code
Description
Max. wall
Pipe materials
thickness of pipe
117-000121 8”/200mm Diamond
Blade
117-000157 8”/200mm TCT Blade
2”
2”
Cast Iron, Ductile
iron, Cement, Plastic
Steel
When cutting steel, the following additional items are required:
Product code
Description
379-000019 Flow Control Valve (for cutting Steel)
400-000031 Feed Screw for TCT Blade
T:
01623 422982
F:
01623 661022
E:
[email protected]
W:
www.hyram.com
26
Underpressure
Drilling
Hy-Ram manufacture and supply a variety of solutions both for water and gas
applications for drilling, tapping, valve insertion and flow stopping… all utilising
‘underpressure’ techniques.
Hy-Ram offer a complete repair service for any manufacture of drilling equipment…
Service Drilling
Hy-Ram No1 Underpressure Drilling Machine
Well proven and robust Underpressure drilling and tapping
machine for inserting ferrules into live water mains up to
48” diameter. The machines can either drill directly into the
main, or using a universal undercarriage, through a bossed
saddle strap. The Hy-Ram No.1 is compatible with other
manufacturer’s equipment, making spare parts and tools
largely interchangeable.
Supplied in a strong steel case with all tools and accessories
(excluding saddles, drill taps and undercarriages). Maximum
working pressure 16bar.
Saddles:
Universal Undercarriage
No.1 Underpressure Drilling Machine Kit:
Product code
Description
Product code
Description
Product code
Description
168-000061
080-000010
080-000001
080-000002
080-000003
080-000004
080-000012
080-000005
080-000013
080-000006
080-000007
080-000037
Rubber Saddle Ring
2” Saddle
3” Saddle
4” Saddle
5” Saddle
6” Saddle
7” Saddle
8” Saddle
9” Saddle
10” Saddle
12” Saddle
14” Saddle
080-000014
080-000015
080-000016
080-000017
080-000018
080-000019
080-000020
080-000021
080-000022
080-000023
080-000024
196-000001
15” Saddle
16” Saddle
18” Saddle
20” Saddle
21” Saddle
22” Saddle
24” Saddle
27” Saddle
30” Saddle
33” Saddle
36” Saddle
Universal Undercarriage
130-000039
Hy-Ram No.1 Drilling Machine Kit
½” - 1” BSP
Drill Taps:
Product code
Description
130-000004
130-000005
130-000006
½” Drill Tap HSS
¾” Drill Tap HSS
1” Drill Tap HSS
Hy-Ram Junior J1
J1 Drilling Machine & Accessories
Facilitates underpressure drilling on service type fittings, especially useful where
service connections are made through saddle straps, clamps and welded nipples
where inserting directly into the main is not possible.
AC Cutters
PVC Cutters
Description
Application
Cutter Sizes
Body Adaptors
Hy-Ram J1-1
Underpressure
Drilling Machine
Drilling through Saddle
Straps, Saddle Clamps,
Ferrule Straps and
Welded Nipples.
19mm &
24mm
¾” & 1” AC
¾” & 1” PVC
¾” & 1” BSP
Product code
Holesaw
Cutter
Description
130-000165 Junior J1-1 Drilling Machine Kit
Cutters & Accessories
27
Product code
Description
Product code
Description
130-000169
130-000168
130-000166
130-000167
¾” AC Cutter
1” AC Cutter
¾” PVC Cutter
1” PVC Cutter
117-000058 Holesaw Cutter 19mm (½” BSP)
117-000020 Holesaw Cutter 24mm (¾” BSP)
640-000055 J1 Drill Body Spacer (for use with EBCO Gunmetal Self Tapping Ferrule Straps)
Available to Hire
Eq ui p ment
& To o lin g
Hy-Ram Junior J2
Facilitates underpressure drilling on service type fittings, especially useful where
service connections are made through saddles straps, clamps and welded
nipples where inserting directly into the main is not possible. Robust, compact
machine - making use of the tried and tested bridle and feedscrew design.
Comes complete with strong carrying case and the option of various adaptors to
suit connection for different applications.
Description
Application
Cutter Sizes
Body
Adaptors
Hy-Ram J2
Underpressure
Drilling
Machine
Drilling through larger Saddle
Straps, Saddle Clamps, Ferrule
Straps and Welded Nipples also
compatible for use with various
drilling saddles through a gate
valve.
30mm &
38mm
1 ½”, 2”,
2 ½”
BSP
J2 Gas Drilling Machine
This kit is as per the standard J2 except the two adaptors (1 ½”–2” BSP & 1
½”–2½”) are not included in the kit and the body of the drill has a 2” BSPT thread
to fit onto gas connections.
Cutters & Accessories
Product code
Description
117-000020
117-000021
117-000173
130-000161
130-000160
661-000045
661-000046
661-000047
Holesaw Cutter 24mm (¾” BSP)
Holesaw Cutter 30mm (1”BSP)
Holesaw Cutter 38mm (1 ¼” BSP)
6mm Pilot Drill - (30mm)
6mm Pilot Drill - (38mm)
2” Extension Spindle
Product code
Description
130-000178
Junior J2 Drilling Machine c/w 2” BSPT Body Only for Gas
Pilot Drill
Extension
Spindle
Holesaws
Cutter
Hy-Ram Junior J3
Underpressure Drilling Machine designed specifically for drilling through HyRam and Erhard type service saddles with 1 ½” BSP outlet port. The brief was for
a robust, reliable, UK quality drilling machine that could stand up to the rigours
of field use. The design incorporates bridle and feedscrew design - drive is via a
standard 19mm ratchet spanner.
Typical
Application
Description
Application
Hy-Ram J3 Underpressure Drilling through service
Drilling Machine
saddles.
Product code
Description
130-000127
J3 Underpressure Drill Kit
Cutter Sizes
Body
Adaptors
38mm
1 ½” BSP
Holesaw Cutters & Pilot Drills
Holesaws Cutter
T:
Pilot Drill
01623 422982
Extension Spindle
F:
01623 661022
E:
Product code
Description
117-000173
130-000160
661-000045
661-000046
661-000047
Holesaw Cutter 38mm (1¼” BSP)
6mm Pilot Drill
[email protected]
W:
www.hyram.com
28
Hy-Ram Universal
Hy-Ram Universal Underpressure Drilling Machine
Underpressure Drilling and Tapping Machine for inserting
ferrules, nipples (Quadrina type) and plugs into live Gas and
Water mains up to 48” diameter.
Solid Drill Tap
Dependant on pipe specification, the operator can choose
from solid drill-taps, holesaw taps or screw-ended taps with
cup drills. Maximum working pressure 10 bar on body.
Product code
Screw Ended
Tap & Cup Drill
Description
130-000038 Hy-Ram Universal Drilling Machine Kit
½ - 2” BSP
Saddle
Holesaw Cutters
Undercarriage
Description
130-000028 ½” HSS Solid Pass Drill
Tap
130-000029 ¾” HSS Solid Pass Drill
Tap
130-000030 1” HSS Solid Pass Drill Tap
130-000021 1 ½” Screw Ended Drill Tap
130-000022 2” Screw Ended Drill Tap
130-000013 1-½” Cup Drill
130-000014 2” Cup Drill
130-000015 ¾” Holesaw Tap
Extension Bracket
– For use on mains
above 12” dia
Accessories:
Drill Taps/Cutters:
Product code
Ferrule
Key
Product code
Description
130-000017 1¼” Holesaw Tap
130-000018 1-½” Holesaw Tap
130-000019 2” Holesaw Tap
117-000020 Holesaw Cutter
24mm (¾” BSP)
30mm (1”BSP)
38mm (1 ¼” BSP)
44mm (1 ½” BSP)
56mm (2” BSP)
Product code
Description
270-000007
270-000008
080-000034
080-000035
080-000036
009-000019
300-000063
300-000123
½”-1” Pass Ferrule Key
1½”-2” Pass Ferrule Key
Universal Undercarriage 2 ¼”
Universal Undercarriage 3”
Universal Undercarriage 3 ½”
Extension Bracket Hy-Ram Uni
Quadrina Carrier 2”
Quadrina Carrier 2½”
Saddles
130-000016 1” Holesaw Tap
Product code
Description
Product code
Description
080-000025
080-000026
080-000027
080-000028
080-000029
Saddle 2”
Saddle 3”
Saddle 4”
Saddle 5”
Saddle 6-7”
080-000030
080-000031
080-000032
080-000033
Saddle 8 - 10”
Saddle 11 - 16”
Saddle 18 - 24”
Saddle 26 - 48”
Hy-Ram LR67
Hy-Ram LR67 Drilling Machine & Accessories
Underpressure Drilling Machine designed specifically for drilling through the
Hy-Ram Hi-Flow Drilling Saddle.
Drills up to 67mm diameter with cutters available for CI, DI, A/C, steel, PE and PVC
pipes. The design incorporates an 80mm flange for connecting directly onto the
Hi-Flow saddle. Maximum working pressure 16bar.
A pneumatic drive is also available.
Description
Application
Cutter Sizes
Flange Sizes
Hy-Ram LR67
Drilling Machine
Water Pipes – Through 80mm
flange. Designed specifically for
use with the Hy-Ram Hi-Flow.
57 and
67mm
(standard)
80mm
(standard)
Product code
Description
130-000111 LR67 Drilling Machine Kit
Bi-Metal Holesaw
29
Available to Hire
Carbide Holesaw
Pilot Drill
Coupon Retaining
Pilot Drill
Eq ui p ment
& To o lin g
Product code
Description
Product code
Description
117-000025
117-000039
117-000113
117-000093
67mm Standard Holesaw
57mm Standard Holesaw
67mm Carbide Holesaw
57mm Carbide Holesaw
130-000112
130-000121
130-000185
300-000134
12mm Pilot Drill (Std.)
12mm Pilot Drill (Carbide tipped)
Coupon Retaining Pilot Drill
Cutter Adaptor (Coupon Retaining only)
Pneumatic Air Wrench
Pneumatic Air Wrench
Product code
Description
711-000024
300-000072
Pneumatic Air Wrench (Torque 60)
Air Wrench Adaptor
Bottom Sampling Setup (for use on Bottom Sampling Hiflows 6” and under):
Range of Test
Pumps available
refer to page 51
Typical Application
Product code
Description
117-000098
46mm Holesaw Cutter Std. (3” Bottom Sampling only)
117-000096
130-000187
661-000049
053-000011
400-000057
46mm Holesaw Cutter Carbide. (3” Bottom Sampling only)
Coupon Retaining Pilot Drill (Bottom Sampling)
Extended Spindle LR67 (Bottom Sampling)
Extended Bridle LR67 (Bottom Sampling)
Extended Feedscrew LR67 (Bottom Sampling)
Branch Drilling
Hy-Ram Compact 4
Hy-Ram C4 Drilling Machine & Accessories
Compact, lightweight hand operated Underpressure Branch Drilling Machine for
‘live’ drilling into Water and Gas lines.
The C4 drills through a gate valve and is supplied as standard with 2 x ‘screw-on’
Flanges to suit 80 and 100 NP16 Flanged Valves. Cutters are available for both
metallic and plastic pipes.
Product code
Description
130-000065 Compact 4 Complete Kit
Pilot Drills
Bi-Metal Holesaw
Carbide Holesaw
Coupon
Retaining Pilot
Drill
Product code
Description
117-000032
117-000033
117-000099
117-000100
130-000045
130-000197
130-000199
70mm Bi-Metal Holesaw Cutter
70mm Carbide Tipped Holesaw Cutter
6mm Pilot Drill (Older Drills)
10mm Dia. Pilot Drill – C4
Coupon Retaining Pilot Drill – C4
T:
01623 422982
Description
F:
01623 661022
Application
Cutter Sizes
Hy-Ram
Water or Gas Pipes* - Makes
C4 Drilling
up to 4” Branch connections
Machine
(Up to 83mm diameter hole).
* Specify which option when ordering
E:
[email protected]
W:
Flange Sizes
70 and 83mm 80 and
(standard)
100mm
(standard)
www.hyram.com
30
Hy-Ram Compact 6
Hy-Ram C6 Drilling Machine & Accessories
Compact, lightweight hand operated Underpressure Branch
Drilling Machine for ‘live’ drilling into Water and Gas lines.
The C6 drills through a gate valve and is supplied as standard
with 3 x ‘screw-on’ Flanges to suit 80, 100 and 150mm NP16
Flanged Water Valves. Cutters are available for both metallic and
plastic pipes.
Bi-Metal
Carbide
Product code
Pilot Drills
Coupon
Retaining
Pilot Drill
Product code
Description
130-000064 C6 Complete Kit **
Description
Application
Hy-Ram
C6 Drilling
Machine
Water or Gas Pipes* Makes up to 6” Branch
connections (Up to
140mm diameter hole).
* Specify which option when ordering
Cutter Sizes
Flange Sizes
70, 83 and
140mm
(standard)
80, 100 and
150mm
(standard)
Bottom Sampling Accessories
Additional accessories for use when bottom sampling with Hi-Flow
drilling saddles, on sizes 6” and above.
Description
117-000032
117-000033
117-000049
117-000099
117-000100
117-000126
130-000072
130-000070
130-000201
130-000202
130-000199
6mm Dia. Pilot Drill (70 & 83mm Holesaws)
6mm Dia. Pilot Drill (140mm Holesaw)
10mm Dia. Pilot Drill (70 & 83mm Holesaw)
10mm Dia. Pilot Drill (140mm Holesaw)
Coupon Retaining Pilot Drill – C6 (70 & 83mm
Holesaws)
130-000198 Coupon Retaining Pilot Drill – C6 (140mm
Holesaw)
Additional Gas Accessories
Facilitates the use of the drill on gas type Knife gate valves.
Product code
Description
Product code
Description
300-000135
300-000134
117-000039
117-000093
130-000175
130-000174
Cutter Adaptor Plate
Cutter Adaptor
57mm Holesaw Cutter (Std.)
57mm Holesaw Cutter (Carbide.)
10mm Pilot Drill
C6/LR67 Coupon retaining pilot drill
640-000019
640-000020
640-000021
640-000033
640-000034
640-000035
80mm Spacer
100mm Spacer
150mm Spacer
Spacer Spigot 80mm NP16
Spacer Spigot100mm NP16
Spacer Spigot 150mm NP16
Peart 150 Branch Drilling Machine
Pneumatically powered ‘heavyweight’ Underpressure Drilling Machine for live ‘breakins’ up to 8” (200mm) on Gas, Water and Chemical lines of any diameter. The machine is
operated through a gate valve and utilises different machine adaptors to suit the valve/
size of branch connection. Maximum working pressure 16bar.
Supplied in a strong wooden transportation/storage box with required tools and
accessories.
Features:
o Simple to operate
o Robust construction
o Hand, air or hydraulic operation
o Depth indicator scale
o For cast iron, ductile iron and steel pipes
Air Motor Set for powering the Peart150,
contained in a strong wooden box:
31
Product code
Description
613-000023
Air Motor Set
Peart150 Drilling Machine Kit:
Product code
Description
130-000098
Peart 150 Drilling Machine in strong wooden box, c/w
Boring bar extension, Ratchet handle, Spanner, Allen key,
Gaskets, Spare Pressure Seals, Cutting Paste
Available to Hire
Eq ui p ment
& To o lin g
Drill Taps & Cutters
Drill Taps & Holesaw Cutters
Hy-Ram supply a wide range of Drills, Drill Taps, Holesaw Taps, Screw Ended
Taps, Cup Drills and bespoke Cutters to suit ALL popular drilling and tapping
machines both in the UK and USA. We have products compatible with the
following machines: Hy-Ram, WASK, Peart, Talbot, Pass and Mueller.
Regrind and Re-tipping service now available on selected ranges… ask our Sales
Office for more details!
Solid No1 Drill Taps
Used with Hy-Ram No.1 & Talbot No.1.
Talbot Style Tang
Drill Tap
Product code
Description
130-000004
130-000005
130-000006
½” Drill Tap HSS
¾” Drill Tap HSS
1” Drill Tap HSS
Screw Ended Taps & Cup Drills
Used with Talbot No. 2 & No.3 drilling machines only.
Talbot Style Tang
Cup Drill
Screw Ended Tap
Product code
Description
130-000026
130-000027
130-000013
130-000014
1 ½” Screw Ended Tap
2” Screw Ended Tap
1-½” Cup Drill
2” Cup Drill
Holesaw Taps & Cutters
Separate Holesaw Taps and Cutters are an economical method for drilling and
tapping mains.
Used with Hy-Ram Universal Drill, Pass Universal Drill and WASK drilling equipment.
Pass/WASK
Style Tang
Holesaw Tap
Holesaw Cutters
Product code
Description
Holesaw Cutter
Size/Type
130-000015
130-000016
130-000017
130-000018
130-000019
¾” Holesaw Tap
1” Holesaw Tap
1¼” Holesaw Tap
1-½” Holesaw Tap
2” Holesaw Tap
117-000020
117-000021
117-000022
117-000023
117-000024
117-000095
24 mm Bi-Metal
30 mm Bi-Metal
38 mm Bi-Metal
44 mm Bi-Metal
56 mm Bi-Metal
56mm Carbide
Solid Drill Taps
Used with Hy-Ram Universal Drill, Pass Universal Drill and WASK drilling
equipment.
Pass/WASK
Style Tang
Drill Tap
Product code
Description
130-000028
130-000029
130-000030
½” HSS Solid Pass Drill Tap
¾” HSS Solid Pass Drill Tap
1” HSS Solid Pass Drill Tap
Screw Ended Taps & Cup Drills
Used with Hy-Ram Universal Drill, Pass Universal Drill and WASK drilling
equipment.
Pass/WASK
Style Tang
T:
Screw Ended Tap/Cup Drill
01623 422982
F:
01623 661022
E:
Product code
Description
130-000021
130-000022
130-000013
130-000014
1 ½” Screw Ended Drill Tap
2” Screw Ended Drill Tap
1-½” Cup Drill
2” Cup Drill
[email protected]
W:
www.hyram.com
32
Drill Taps & Holesaw Cutters
Starrett Bi Metal Constant Pitch Holesaws…
have 6 teeth per inch and are ideal for thinner gauge materials. Constant Pitch
provides a smooth cut, with minimal tendency to bite or snag on contact with
irregular surfaces.
Bi Metal Cutters
Advantages: Smooth cut on thinner gauge materials.
Minimal tendency to bite or snag on thinner gauge materials..
Starrett Tungsten Carbide Tipped Constant Pitch...
have tough tungsten carbide tipped teeth that have a positive cutting angle
which provides fast and efficient removal of chips and swarf.
Advantages: Tungsten carbide tipped teeth provides superb product life and
cutting performance. High cutting accuracy.
Product code
Size
Cutter Type
Drive
Method*
To Suit
117-000058 19mm Bi-Metal
T
Junior J1
117-000020 24mm Bi-Metal
T
Junior J1
117-000020 24mm Bi-Metal
T
¾” Holesaw Tap
Carbide Tipped Cutters
117-000021 30mm Bi-Metal
T
Junior J2
117-000021 30mm Bi-Metal
T
1” Holesaw Tap
117-000162
35mm
Bi-Metal
T
Hydrant
Wizard
Cutter Type
Application
117-000173
38mm
Bi-Metal
LH
Junior
J2/Junior
J3
Bi-Metal
Cast Iron
117-000022
38mm
Bi-Metal
T
1
¼”
Holesaw
Tap
Ductile Iron (Bit. Lined)
117-000023 44mm Bi-Metal
LH
1 ½” Holesaw Tap
Steel
117-000024 56mm Bi-Metal
LH
2” Holesaw Tap
Carbide Tipped
Ductile (Cement Lined)
117-000095 56mm Carbide Tipped LH
2” Holesaw Tap
PE
117-000039 57mm Bi-Metal
LH
LR67
PVC
LR67
AC
117-000025 67mm Bi-Metal
LH
LR67
Clay
LR67
117-000032 70mm Bi-Metal
LH
Compact 4/Compact 6
Please note...
Hy-Ram always recommend the use of Starrett cutters due to
Compact 4/Compact 6
the backing plate being thicker than other manufacturers hence
117-000033 83mm Bi-Metal
LH
Compact 4/Compact 6
offering added strength.
Compact 4/Compact 6
LH & ED Compact 6
** Due to the nature of all holesaws, the threads are not always 117-000049 140mm Bi-Metal
sufficiently strong to hold securely to the arbour. For this reason, 117-000126 140mm Carbide Tipped LH & ED Compact 6
for certain holesaw sizes, the threads are ‘drilled out’ and 2 x
location holes added that then form the method of ‘drive’ from * Key:
the corresponding pins on the Tap.
T = THREADED LH = Pin Locating Holes added and central thread drilled out**
ED = Extended Depth
33
Available to Hire
Eq ui p ment
& To o lin g
Hy-Ram is a specialist stockist of gas test equipment, gas detection equipment, gas
safety equipment and general gas tooling.
Ask our Sales Office about your specific requirements. We offer sales, hire repair and
recalibration services.
Gas Tooling
Gas Test Equipment
Test Standpipes (Cowhorns)
Mains test Cowhorns for pressure testing Gas pipelines in accordance with NGT
GIS specification GIS/TE/P6.3:2007.
The 2 part manifold comprises a cowhorn standpipe (supplied in 3 different
pressure ratings, colour coded for ease of identification), and a common base
(common to all 3 types).
The cowhorn facilitates quick and safely controlled pressurising via a ludecke
type coupler and diaphragm valve and is also fitted with a pressure gauge and
safety pressure relief valve.
Type
Colour
Gauge
Relief valve setting
Low pressure
Medium pressure
High pressure
Common Base
Orange
Blue
Red
Yellow
63mm x 0-1 bar/0-15 psi
63mm x 0-4 bar/0-60 psi
63mm x 0-10 bar/0-160 psi
N/A
0.385 bar
3.3 bar
7.7 bar
N/A
Product code
Description
643-000064
Low pressure, complete with Common Base
643-000062
Medium pressure, complete with Common Base
643-000077
High pressure, complete with Common Base
643-000091
Common Base only
Test certificates and tagging can be supplied where requested
Multitester
Multi test cap for pressure testing PE Gas services through the Electrofusion top
tapping tee, by making use of the 12mm Hex Cutter drive. Requires either brass
or steel tee assembly.
Multitester with
Steel Tee Assembly
Product code
Description
300-000009
300-000010
300-000113
Multitester (Only)
Multitester Steel Tee assembly
Multitester Brass Tee assembly
Brass Tee Option
Manoflex Gauges
Flexible water manometers used for gas service pressure testing.
T:
01623 422982
F:
01623 661022
E:
Product code
Description
161-000113
161-000157
161-000017
161-000018
Manoflex Gauge 12”
[email protected]
W:
www.hyram.com
34
Manometer Hose
Red rubber tubing is used commonly in conjunction with manometer gauges
and general pressure testing. Rubber test hose is available in thin or thick wall.
Product code
Description
359-000098
359-000180
‘Thin wall’ Red natural Rubber tubing
‘Thick wall’ Red natural Rubber tubing
Service & Meter Testing
A range of test manifolds available for use on incoming services.
A
B
C
D
Ref
Product code
Description
A
B
C
643-000054
189-000007
643-000087
D
106-000037
Service test standpipe (orange)
Service test piece (Meter Cock)
Service test manifold, anaconda style, with valve and
nozzle
PE Service Tester 20/25/32mm
Gauges
Druck Gauges
The Druck DPI 705 Series of handheld pressure indicators combine tough and rugged design with accurate
and reliable pressure measurement.
Units can be bought to measure absolute, gauge or differential pressures in a wide range of pressure
readings. Hy-Ram offers as standard the intrinsically safe units in pressure ratings of 2, 7 & 20 Bar absolute.
These usually come as remote sensing versions.
For more information on the range of Druck Gauges available, please contact our Sales Office.
Product code
Description
DPI705IS2A
Druck Gauge, Intrinsically Safe, 2 bar absolute remote sensor
DPI705IS7A Druck Gauge, Intrinsically Safe, 7 bar absolute remote sensor
DPI705IS20A Druck Gauge, Intrinsically Safe, 20 bar absolute remote sensor
DRUCCASE
Carry Case for DPI705IS
Comark Gauges
Two multi-scale pressure meters with twin inputs and memory hold of selected scale. Both instruments
feature a dust and waterproof case to IP67 and can measure positive or negative (vacuum) and gauge
single input or differential pressures.
For more information, please contact our Sales Office.
35
Available to Hire
Eq ui p ment
& To o lin g
Gas Tooling
Drawlock Tooling
Hy-Ram is an ‘official’ stockist and distributor for the GF Drawlock range of tools and
equipment needed to install the ever popular Drawlock range of Gas pipe fittings.
A
E
F
D
Product code
Description
106-000028
106-000041
104-000001
104-000002
104-000003
104-000004
104-000018
104-000019
104-000020
104-000013
104-000014
104-000011
104-000012
104-000021
104-000022
104-000023
657-000049
657-000050
657-000051
030-000041
030-000038
030-000039
030-000040
104-000008
104-000009
104-000015
014-000012
014-000009
014-000010
Drawlock Tool Complete Kit 16-32mm (13 piece)
Drawlock Tool Complete Kit 20-32mm (12 piece)
16mm Draw-Tool c/w Expander
16mm Expander
20mm Expander
25mm Expander
32mm Expander
40mm Expander
50mm Expander
63mm Expander
¾” Cap (Spare)
1” Cap (Spare)
2” Cap (Spare)
16mm Adaptor Bush
20mm Adaptor Bush
25mm Adaptor Bush
32mm Adaptor Bush
Combination Tool c/w ¾” cap
Combination Tool c/w 1” cap
Combination Tool Stem ¾” - 1”
Draw-tool 16mm Stem
Draw-tool 20/25/32mm Stem
Draw-tool 40/50/63mm Stem
B
B
B
B
B
B
B
C
C
C
C
C
C
C
D
D
D
E
E
E
E
F
F
G
H
H
H
B
C
Ref
A
G
H
Foam Guns
Typically used for insertion of anaerobic foam in sealing meter box connections
or sealing dead mains.
Foam Gun
(Small)
Foam Gun (Large)
Product code
Description
151-000001
151-000003
Foam off Gun Small - 12"
Foam off Gun Large - 18"
Steve Vick Foam guns, for use with the Steve Vick Fullseal™ system for sealing dead
inserted gas services.
Steve Vick
Foam Guns
T:
01623 422982
F:
01623 661022
E:
Product code
Description
151-000007
151-000005
40cm Steve Vick Foam Gun
21cm Steve Vick Foam Gun
[email protected]
W:
www.hyram.com
36
Crimp Tools
WASK Crimp Tools
A one piece malleable iron tool for the rapid construction of a WASK crimp joint. Features a metal
to metal stop for accurate joint construction.
Product code
Description
Colour
WASKBE0021
WASKBE0022
WASKBE0023
WASKBE0024
WASKBE0009
16mm WASK Crimp Tool
Bronze
Green
Blue
Yellow
Orange
Plug Lifter
Plug Lifter
To operate the internal plug of a building entry tee or 2’’/63mm BET safely and without the escape of
gas. To operate the internal plug of a 2’’/63mm Top Service Tee safely and without the escape of gas.
Product code
Description
WASKBE0128
WASKEA0056
2”/63mm BET Only
2”/63mm Top Service Tee
Vent Tubes
Vent tubes allow releasing any unwanted gas to atmosphere safely during the bagging off process.
Product code
Description
051-000006
3M Vent Tube c/w Flame Trap c/w (1m + 2m tubes and 1”
BSP connections)
Live Heads
Live Heads
A Live Head is used as part of the Live Mains Insertion process; designed to safely control the flow
of gas while inserting into a host main.
Size
SDR11
SDR17
SDR21
40mm
55mm
63mm
75mm
90mm
125mm
140mm
180mm
077-000141
077-000142
077-000143
077-000071
077-000073
077-000076
077-000152
077-000154
077-000144
077-000146
077-000148
077-000150
077-000153
077-000155
077-000145
077-000147
077-000149
077-000151
077-000156
Purge Ejectors
Mini Purge Ejector
The new Mini Purge Ejector is designed as an alternative to the large purge ejectors which have
been in use since the mid 1980s. It works on the same Venturi principle but is lighter and easier to
handle. Designed for use on mains from 3” to 12” in diameter, the Mini Purge Ejector ensures a fast,
clinical and effective purge on gas pipes to be abandoned.
The Mini Purge Ejector is attached to one end of the isolated main and the vent is opened at the
other end to draw in air. Compressed air is introduced into the Mini Purge Ejector which creates
a vacuum. This has the effect of withdrawing the gas from the main; the purged gas and air are
expelled into the atmosphere.
Product code
Description
Product code
Description
359-000200 Mini Purge Ejector
359-000202 Extension Tube (Vent Stack)
* Note, 2 tubes required to reach minimum height requirements
37
Available to Hire
Eq ui p ment
& To o lin g
Gas Safety Equipment
MSA Breathing Apparatus
MSA Turbo-Flo Fresh Air Hose Breathing Apparatus
Hy-Ram is a Premier Distributor for the MSA range of breathing apparatus.
The Turbo-Flo fresh air hose breathing apparatus is an isolating respiratory
protection apparatus which can be put to use where conditions permit to draw
air from a hazard-free atmosphere.
Turbo-Flo can be used as unassisted or as assisted fresh air breathing apparatus. Since
the air supply is practically unlimited, the user can work without time restrictions.
The Turbo-Flo fresh air hose breathing apparatus is tested and approved
according to EN 138 as assisted and unassisted fresh air breathing apparatus.
Product code
Description
Mask
Metal
Storage Box
006-000030 Fresh Air Breathing Apparatus 3S
Yes
006-000059 Fresh Air Breathing Apparatus 3S
No
006-000060 Fresh Air Breathing Apparatus Advantage 3000 Yes
006-000061 Fresh Air Breathing Apparatus Advantage 3000 No
045-000161 Spare Metal Storage Case
n/a
006-000049 Turbo Flo Blower Unit 110v AC n/a
Yes
No
Martindale Breathing Apparatus
Hy-Ram is an approved distributor for the Martindale range of breathing apparatus.
The Martindale (negative pressure) unassisted Fresh Air System is a simple
respiratory protective system for use in “Confined spaces”. The simplicity and ease
of use of the system allows operators to work safely in potentially oxygen deficient
hazardous areas, breathing air from an uncontaminated source.
The Martindale (positive pressure) assisted Fresh Air System combines all the
features of the unassisted system but with the added benefit of having clean air
supplied from an uncontaminated source by an electrically driven air moving
turbine system.
Powered System
Classification - EN 138 Class 2, Mask - EN 136, Class 3.
Product code
Description
Version
006-000056
Martindale Fresh Air Breathing
Apparatus M26/400
Apparatus M26/450
Apparatus M26/500
Unpowered No
006-000057
006-000058
Unpowered System
Turbine
Included
Powered
No
Powered
Yes
For spare parts or more information, please contact our Sales Office.
Gas Detectors
Gascoseeker 2-500
Built on the success of the robust and reliable Gascoseeker MK2, the Gascoseeker
2-500 is the UK gas industry standard instrument for measuring % LEL and %
volume flammable hydrocarbons, with over 20,000 instruments in use in the UK
gas industry.
The two-button operation means the Gascoseeker 2-500 is easy to use and
operator training can be conducted quickly. The rugged design allows the
Gascoseeker 2-500 to be used in harsh environments. The Gascoseeker 2-500 is
also fully compatible with a range of calibration software and equipment.
Please contact our Sales Office for more information.
T:
01623 422982
F:
01623 661022
E:
Product code
Description
905-000011
Gascoseeker 2-500
[email protected]
W:
www.hyram.com
38
Flame Arresters
For use where gas mains are being purged or vented. Flame arresters prevent
a flame entering or getting back in to the main. Should expelled gas ignite, the
arrester is designed to contain or extinguish the flame. All flame arresters have
been tested and certified in accordance with national or international standards.
Flame arresters are available without weather hoods if required.
Product code
Description
718-000002
718-000001
718-000004
¾” Flame arrester with weather hood
1” Flame arrester with weather hood
2” Flame arrester with weather hood
Purge Hoses
All purge hoses supplied by Hy-Ram are fitted with flame arresters and are
available in a variety of sizes.
Product code
Description
359-000162
359-000129
359-000130
¾” x 5m Purge Hose c/w flame arrester
¾” x 10m Purge Hose c/w flame arrester
1” x 10m Purge Hose c/w flame arrester
Searcher Bars
Impact Searcher Bars
Used for detecting gas leaks, the spike creates a hole in soil, asphalt or concrete,
allowing a gas detection probe to then be inserted (not included). The spike is
driven into the ground by a “pile driver” action.
Type A1 - Reversible Impact Searcher Bar
The reversible impact searcher bar is specifically designed to provide two
different spike lengths without the need for separate interchangeable spikes.
Product code
Description
161-000118
8”/15” Reversible Impact Searcher Bar
Types A2-A8 - Non-Reversible Impact Searcher Bars
The range of non-reversible impact searcher bars is perfect for when one fixed
ground depth is required. Spikes of various lengths cater for ground depths
between 8” (205mm) and 59” (1.5m).
Product code
Description
161-000162
161-000163
161-000164
161-000165
161-000166
161-000167
161-000168
8” (205mm) Non Reversible Impact Searcher Bar
Non-Impact Searcher Bar
The non-impact searcher bar is designed for use in small spaces such as ditches
where the ground is reasonably soft. Therefore, it is recommended the probe is
pushed into the ground by hand only. The non-impact searcher bar can be used
both horizontally and vertically where operating space is limited. The fixed spike
can be made to a custom length to suit different requirements.
Product code
Description
161-000083
H1 Non Impact Searcher Bar
For more information on Searcher Bars, please contact our Sales Office.
39
Available to Hire
Eq ui p ment
& To o lin g
Bar Hole Plugs
Permanent and Reusable Bar Hole Plugs
Injectable resin and pre formed reusable plugs to fill bar holes and cores. The
cartridge method enables the user to inject a small amount of polymer that will
cure to form a flexible hard wearing and weather resistant plug. The cartridge
can be resealed allowing for multiple applications. The pre formed plugs are
designed to quickly inserted into bar holes providing a flexible seal, but also
allowing for removal if necessary. Additionally they will not stick together when
hot or become brittle and shatter in cold weather. Both products are available in
a variety of colours to suit the application.
Leak Detection
Gas Leak Detector with Atomiser
o Gas leak fluid with atomiser, non flammable, for detection of leaks in joints,
connections etc.
o Non corrosive.
Product code
Description
905-000020
Gas Leak Detector with Atomiser
Serviflex System
Main Features
The Serviflex® system is a versatile, safe and efficient gas service pipe replacement
system. It is capable of relining aged metallic pipework that contains short radius
bends (elbows) from the meter position, inside the property, to a convenient external
location. Insertion is achieved by use of a dual wall, gas grade, polyethylene (PE) flexible
liner. Installation of the liner is achieved by the use of specifically designed tooling
that enables the liner to be temporarily stiffened during the insertion process. This is
achieved without compromise to the long term strength of the pipe or flow capacity.
Applications
o Approved to UK gas industry standards for use up to 75mbar
o Used for relining 1’’ metallic pipes
o Maximum insertion length 16.5m
Bottom Layer
Top Layer
Tool Box
Middle Layer
Buddy Kit
T:
01623 422982
F:
01623 661022
E:
[email protected]
W:
www.hyram.com
40
Hy-Ram offer a complete range of specialist water equipment and tools including lifting
keys, valve keys, meter kits, standpipes, hoses/fittings, pressure test equipment, pumps
and so on. The range is stocked at our regional depots and we can normally source
specials within 48 hours. Call our Sales Office and discuss your specific requirements.
Water Tooling
Valve Keys & Spindles
UniKey
The design philosophy is that ‘one key fits all’ – therefore it will ‘fit’ all known valve
and hydrant spindle shapes and sizes and cater for broken or missing stem caps.
It can also be used on irregular shapes such as stop tap handles... even if they
are damaged or incomplete! The aluminium key is commonly used on hydrants
and the steel key is used on all other valves.
Used in conjunction with the shaft extensions the user is also equipped to
operate ‘deeper’ valves whilst reducing the risk of physical strain injuries.
Key features:
o One size fits all design
o Robust construction, welded and powder coated
o Available individually or as a kit
o Integral ‘Tee’ Handle with ‘Chisel’ end
o Shaft extensions available
o Suitable for gas and water valves, hydrants, etc
Features:
The UniKey is manufactured in two sizes: a ‘Small’ Key designed around Water
Valves on pipes up to 12” (300mm) diameter and Fire Hydrants and a ‘Large’ Key
for use on valves above 12” diameter.
The Kit also comes complete with two shaft extensions: 450mm and 750mm long.
Steel Uni KeyKit
The UniKey with integrated ‘Tee’ Handle is available in the following formats...
Aluminium UniKey
UniKey Head
Product code
Description
270-000139
270-000141
270-000142
270-000147
Hy-Ram Steel UniKey Kit
Hy-Ram Steel UniKey (Large Key) c/w integral bar
Hy-Ram Steel UniKey (Small Key) c/w integral bar
Hy-Ram Aluminium UniKey c/w integral bar
Valve Keys
Forged Steel Equipment
Light, medium and heavy duty keys for the operation of hydrants and sluice
valves along with keys for broken or damaged stop taps, grid lifters, chamber
cleaning scoops, ladles and grabs.
A
D
B
E
C
41
A
A
B
B
B
B
C
D
E
Product code
Description
270-000016
270-000045
270-000017
270-000131
270-000107
270-000067
270-000011
270-000082
270-000154
42” Aluminium Valve Key c/w integral bar
60” Aluminium Valve Key c/w integral Bar
42” Forged Steel Valve Key c/w integral bar
42” Forged Steel Valve Key c/w integral bar - Thames Pattern
42” Forged Steel Valve Key c/w integral bar - Liverpool Pattern
60” Forged Steel Valve Key c/w integral Bar
42” Contractor Valve Tee Key
Valve Key Forged Steel 42’’ Loop Top c/w Separate bar
42” Stainless Steel Valve Key c/w integral bar
Available to Hire
Eq ui p ment
& To o lin g
Hy-Ram Controlled Operation (CO) Valve Key Sets
Setting a new standard for operational best practice
Preventing unplanned interruptions to supply requires more than a rapid
response to bursts, operational care and maintenance is a crucial element for a
network to perform well.
Thinking differently and understanding and addressing true root causes has led
to the introduction of the ‘new style’ of Valve Key and operational procedure to
deliver best practice. In turn this has delivered significant customer benefits in
terms of reduced bursts, customer interruptions and highway excavations!
Valve operation can create network stress
A recent study has found that 63% of all interruptions occur following a valve
operation in the previous 7 days!
The operation of a Valve changes the velocity and causes a localised change in
pressure which can cause surges in the network.
The Hy-Ram Controlled-Operation (CO) Valve Key Sets allow Valves to be
operated in a slower, more controlled and safer way. The risk of creating pressure
transients is much reduced, hence pipe stress and the potential for a burst is
decreased.
Health & safety considerations
The operation of valves has had a dramatic impact on lost time across water
companies. Recent studies have found that over 20% of lost time is due to
personal injury and that more than a third of all incidents resulting in more
than 3 days of work were due to valving operations. The use of the Controlled
Operation Valve Key sets mitigates a lot of potential hazards; simple benefits include:
(i) The height at which the valve is being operated can be varied
(ii) The use of a ‘pivot’ allows for greater torque to be applied to the valving
operation with minimal effort
(iii) Potential for 2 man operation in a controlled manner.
Item
Product Code
Description
Weight
1
2
3
4
270-000196
270-000197
270-000198
023-000242
Single Key 50mm
Double Key 38mm - 35mm
Key Bar
Tommy Bar
16.5kg
19.5kg
12.5kg
2.5kg
Extension Spindles
Valve Extension Spindles
Hy-Ram offer a wide range of forged steel spindles. If the size you require is not
listed, please contact our Sales Office.
T:
01623 422982
F:
01623 661022
E:
Product code
Description
661-000029
661-000022
661-000023
661-000024
661-000025
661-000020
661-000079
661-000021
661-000083
661-000026
661-000027
661-000084
661-000085
661-000086
661-000082
661-000087
661-000066
Forged Steel Valve Extension Spindle
[email protected]
W:
Overall length
Lift length
9”
12”
15”
18”
21”
24”
27”
30”
33”
36”
39”
42”
45”
48”
51”
54”
60”
6”
9”
12”
15”
18”
21”
24”
27”
30”
33”
36”
39”
42”
45”
48”
51”
57”
www.hyram.com
42
False Tops & Cap Adaptors
Used to reduce large valve caps to facilitate the use of a standard valve key.
Value Cap Adapter
Product code
Description
661-000070
657-000040
657-000041
657-000042
657-000043
657-000044
Large Valve Cap to std Valve cap adaptor (48 - 35mm)
1" x 1 ¼" false tops
¾" x 1 ¼" false tops
1 1⁄8" x 1 ¼" false tops
1 ¼" x 1 ¼" false tops
1 ¼" x 2" false tops
Stop Tap Keys
All items featured come with a T handle. Images show base of key.
A
B
F
C
D
H
G
I
E
J
K
O
L
M
Ref
Product code
Description
A
B
C
D
E
F
G
H
I
J
K
L
270-000039
270-000015
270-000019
270-000044
270-000120
270-000041
270-000043
270-000095
270-000126
270-000127
270-000021
270-000022
M
N
O
270-000088
270-000136
270-000168
Stop Tap Key 2 pronged
Stop Tap Key 4 pronged
Stop Tap Key crutch type
Stop Tap Key – Heavy plug cock
Spherical Valve Key c/w Edge up handle & Dimple
Stop Tap Key ½” square drive female
Stop Tap Key 1” square drive female
Stop Tap Key ½” Sq Drive Male Tee
Teesside Pattern Ferrule Key 3⁄8” Male
Teesside Pattern Ferrule Key 3⁄8” Female
Broken Stop Tap Key spindle grip (Cam)
Broken Stop Tap Key body removal (Claw)
Claw Key Separate Items (Use in conjunction with H)
Standard Claw ½” Female Square drive
Heavy Duty Claw x ½” Square Drive Female
Adjusting foot c/w ½” Square Drive Adapter
N
Meter Keys
For use in either removing & installing water meters or the associated plugs.
Five Head Meter Removal Kit
A
C
43
B
D
Facilitates removal of meters from chambers.
Kit contains: 1x ½” Square Drive Tee Key
1x Type 1 Meter Removal Head
1x Type 2(S) Actaris (Schlumberger) Removal Head
1x Type 3 Kent Removal Head
1x Type 4 Kent No 4 Removal Head
1x Type 5 Kent Removal Head.
Ref
Product code
Description
A
B
C
D
270-000146
270-000103
270-000129
270-000114
Five Head Meter Removal Kit
Universal Meter Key - Strap Key
Meter Removal Strap (strap only) ½” Sq Drive Female
B/ Box Cap Removal Key Double Ended (27mm & 30mm)
Available to Hire
Eq ui p ment
& To o lin g
Water Valve & Hydrant Equipment: Standpipes & Fittings
Standpipes
Hy-Ram offer a wide variety of commonly used standpipes. From smaller bore contractors
standpipes, up to 2 ½” aluminium standpipes. Standpipes can be modified to suit individual needs
should additional fittings such as pressure gauges, meters, PE connectors be required.
A
C
E
Hy-Ram can also offer bespoke standpipes which can be supplied with a tail of polyethylene
pipe if required, with connectors of your choice. Mounting options are available from a basic
wooden post up to a lockable cabinet with insulation. Whatever your requirements please
discuss them with our Sales Office.
B
D
Product code
Outlet
Description
DCV
Base
A
B
C
D
E
643-000143
643-000105
643-000056
643-000055
643-000093
½” Hose Union Bibtap
½” Chrome Sampling Tap
¾” Hose Union Bibtap
Yes
No
No
Yes
Yes
LRT
LRT
LRT
LRT
LRT
F
643-000088 ¾” Hose Union Bibtap
Double Outlet
643-000068 1” Hose Union Bibtap
643-000045 2 ½” Female Instantaneous
Standpipe
Sampling Standpipe
Contractors Standpipe
Contractors Standpipe c/w
pressure gauge
Yes
LRT
Light Alloy Hydrant Standpipe
c/w brass test outlet
Yes
No
Yes
Yes
LRT
LRT
LRT
LRT
No
LRT
Light Alloy Hydrant Standpipe Yes
LRT
Boundary Box Standpipe
Boundary Box Standpipe c/w
16 Bar pressure gauge
Yes
Yes
BBB
BBB
Yes
No
Yes
Yes
BT
BT
BT
BT
G
H
I
J
F
K
A
E
Double Outlet
Double Outlet
643-000122 ½” Hose Union Bibtap
643-000146 ¾” Hose Union Bibtap
D
H
I
L
643-000103
643-000170
643-000090
643-000171
L
G
I
H
J
2 ½” Female Instantaneous
Double outlet
Base Options
K
London
Round
Thread (LRT)
L
Boundary Box/MSM
Base (BBB)
Belfast Thread (BT)
Hose
Hoses
Lay flat, flushing and portable hose available in a variety of colours and grades.
Hoses can be made to specific lengths and all come with wired on couplings.
Lay Flat Hose
T:
01623 422982
F:
01623 661022
E:
Product Code
Description
Length
End 1
End 2
359-000175
359-000176
359-000177
359-000164
359-000163
359-000139
359-000172
359-000170
359-000171
2 ½” General Transfer Hose
2 ½” Potable Water Hose
2 ½” PVC Flushing Hose
2 ½” General Purpose Hose
Cust. Spec.
Cust. Spec.
Cust. Spec.
5m
10m
20m
5m
10m
20m
Cust. Spec.
Cust. Spec.
Cust. Spec.
Male Inst.
Male Inst.
Male Inst.
Male Inst.
Male Inst.
Male Inst.
Cust. Spec.
Cust. Spec.
Cust. Spec.
Female Inst.
Female Inst.
Female Inst.
Female Inst.
Female Inst.
Female Inst.
[email protected]
W:
www.hyram.com
44
Instantaneous Fittings
Adaptors
Hy-Ram offer a wide range of Aluminium Adaptors and Couplers.
A
B
C
D
E
F
G
H
I
K
L
J
M
N
O
P
Item
Product code
Description
A
B
A&B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
301-000025
301-000018
301-000034
301-000015
301-000016
301-000022
301-000026
301-000032
301-000013
301-000024
301-000038
301-000053
301-000052
301-000045
301-000037
089-000144
161-000059
2 ½” Female Instantaneous x 2 ½” hose tail
2 ½” Male Instantaneous x 2 ½” hose tail
2 ½” Male and female hose tail set
2 ½” Male Instantaneous x 2” Male BSP
2 ½” Male Instantaneous x 2” Female BSP
2 ½” Female Instantaneous x 2” Male BSP
2½” Female Instantaneous x 2”BSP female thread
2 ½” Double male Instantaneous adaptor
2 ½” Double female Instantaneous adaptor
2 ½” Male Instantaneous Blanking Plug
2 ½” Female Instantaneous Blanking cap
2 ½” Instantaneous Collecting Breech
2 ½” Instantaneous Dividing Breech
2 ½” Instantaneous Male/Female 90˚ Bend
Hose Nozzle 2 ½” Male Inst x ¾” Outlet Single Piece
2 ½” Hose super-clamp
Static Test Assembly (c/w 16 BAR gauge)
Hydrant Caps & Fittings
Facilitates blanking off hydrants or utilising the outlet as a test point.
A
B
C
D
E
F
G
H
I/J
Item
Product code
Description
A
B
C
D
E
656-000083
656-000082
656-000089
656-000076
643-000117
F
G
H
I/J
I/J
643-000128
270-000085
643-000129
168-000110
168-000111
2 ½” Hydrant Blanking Caps
2 ½” Hydrant Blanking Caps D/T ¾” BSP Female
2 ½” Hydrant Blanking Caps D/T 1” BSP Female
2 ½” Hydrant Blanking Caps D/T 2” BSP Female
Hydrant Cap c/w Recoil Hose & Quick fit couplings, Blue
Powder Coated
Hydrant Cap, c/w Quick Fit coupling, Blue Powder Coat
Gunmetal b/b plug c/w recoil hose and pressure gauge
Recoil hose, c/w QF fittings both ends
2 ½” Standpipe Outlet Washers (White)
2 ½” Standpipe Base Washers (Black)
Hose Ramps
A
B
Hose Ramps allow hoses to be laid across trafficked areas without
Item Product code
Description
any damage being made to the hose or vehicles. Hy-Ram offer two
A
672-000001 Natural/Sbr Rubber Compound (14kg)
styles, Ramps (A) and Bridges (B) for use with 2 ½” lay flat hoses. Other B
672-000002 Natural/Sbr Rubber Compound/Steel (21kg)
sizes and types are available for use with cables and smaller size hose.
45
Available to Hire
Eq ui p ment
& To o lin g
Water Test Equipment
Pipe Stoppers & Test Ends
Pipe Stoppers
Hy-Ram supply a range of quality pipe stoppers. They are commonly used for air testing
pipe work, or simply blocking the end of the pipe to prevent contaminants or wildlife
entering the pipe work.
Pipe Stoppers
Product code
Description
Pipe Range (ID)
Plates
Outlet
Cap
656-000121
656-000122
656-000123
656-000143
656-000124
656-000125
656-000126
656-000127
656-000128
656-000129
656-000130
656-000131
656-000132
656-000133
656-000134
656-000135
656-000136
656-000137
656-000138
656-000139
656-000140
656-000141
656-000142
2” Pipe Stopper
3” Pipe Stopper
4” Pipe Stopper
4½” Pipe Stopper
5” Pipe Stopper
6” Pipe Stopper
7” Pipe Stopper
8” Pipe Stopper
9” Pipe Stopper
10” Pipe Stopper
11” Pipe Stopper
12” Pipe Stopper
13” Pipe Stopper
14” Pipe Stopper
15” Pipe Stopper
16” Pipe Stopper
17” Pipe Stopper
18” Pipe Stopper
20” Pipe Stopper
21” Pipe Stopper
22” Pipe Stopper
24” Pipe Stopper
26” Pipe Stopper
49-60mm
73-85mm
94-110mm
108-120mm
121-138mm
146-163mm
170-195mm
191-211mm
216-235mm
244-260mm
275-305mm
296-314mm
315-350mm
340-375mm
365-400mm
390-425mm
415-440mm
440-475mm
495-525mm
520-555mm
534-569mm
590-630mm
640-675mm
Steel
Steel
Steel
Aluminium
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
½” BSP
½” BSP
½” BSP
½” BSP
½” BSP
½” BSP
½” BSP
½” BSP
1” BSP
1” BSP
1” BSP
1” BSP
1” BSP
1” BSP
1” BSP
1” BSP
1” BSP
1” BSP
2” BSP
2” BSP
2” BSP
2” BSP
2” BSP
Plastic
Plastic
Plastic
Brass
Plastic
Plastic
Plastic
Plastic
Brass
Brass
Brass
Brass
Brass
Brass
Brass
Brass
Brass
Brass
Brass
Brass
Brass
Brass
Brass
Rim Fastening, Double seal, Nylon and twin port rim fastening stops are also available.
Pressure Test Ends
Pressure Test Ends were designed and developed using the same principles as the
expanding towing head. They are inserted into the end of a polyethylene pipe and
expanded, using a spanner, to seal and grip the pipe. The pipe installation can then be
tested by connecting compressed air to the ball valve fitted on the end.
(Please note larger sizes are available on request)
T:
01623 422982
F:
Size
SDR11
SDR17
SDR21
50mm
55mm
63mm
75mm
90mm
110mm
125mm
140mm
160mm
180mm
106-000042
106-000043
106-000044
106-000045
106-000046
106-000047
106-000048
106-000049
106-000050
106-000051
106-000052
106-000053
106-000054
106-000055
106-000056
106-000057
106-000058
106-000059
106-000060
106-000061
106-000062
106-000063
106-000064
106-000065
106-000066
106-000067
106-000068
106-000069
106-000070
106-000071
01623 661022
E:
[email protected]
W:
www.hyram.com
46
Flow Cups
Flow cups available in a number of sizes in order to test various flow rates.
Product code
Description
161-000041
161-000042
161-000043
5 Gallon Flow Cup
10 Gallon Flow Cup
35 Gallon Flow Cup
Chlorus Tablets & Spray
Chlorus Tablets
Instachlor PR1000 tablets provide a convenient means of small-scale water
chlorination.
Product code
Description
189-000010
189-000011
189-000035
PR1000 Chlorus Tablets Tub of 100
PR1000 Chlorus Tablets Tub of 300
Hy-Ram Chlorus Tablets Tub of 200
061-000001
Chlorus Spray Bottle
Customer Care Kits
Choose from our ready made flow, pressure and water testing kits contained
within hard-wearing transport cases, or contact the Sales Office and customise
to suit your requirements.
Service & Flow Pressure Testing Kit.
Allows the user to check pressure and flow rates at the same time. Kit will fit to
meter box’s and standard taps using Hozelock fittings.
Product code
Description
161-000115C
Inspectors Level of Service Flow & Pressure Testing Kit
High & Low Pressure and Flow Kit
This kit allows the user to check pressures from Fire Hydrants (using a separate
standpipe), meter box’s and common household taps. Also allows measurement
of household flow rates with the use of the flow cup.
Product code
Description
161-000046C
High & Low Pressure and Flow Kit
Multifunction Stop Tap Adaptor Kit
For use in conjunction with a ½” square drive tee key. This kit offers a solution to
most stop tap removal and operational requirements.
47
Product code
Description
161-000116C
Inspectors Multi Function Stop Tap Removal / Repair Kit
Available to Hire
Eq ui p ment
& To o lin g
General Purpose Tools
Lifting Keys
Forged Steel Equipment
Lid Lifters
A range of high quality, durable and painted Lid Lifters.
A
B
C
D
Ref
Product code
Length/Description
UOM
Duty
Handle
A
A
A
B
B
B
B
A
B
A
A
C
D
270-000018
270-000116
270-000111
270-000046
270-000023
270-000024
270-000049
270-000074
270-000078
270-000048
270-000123
270-000115
270-000117
6”
9”
12”
12”
12”
18”
18”
18” (40x15mm End)
24”
24”
18” tee handle light duty
Stopcock/Meter Box Lid Todging Bar
54’’ Pricker Bar Pointed End
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Each
Each
Light (½”)
Light (½”)
Heavy (5⁄8”)
Light (½”)
Heavy (5⁄8”)
Light (½”)
Heavy (5⁄8”)
Heavy (5⁄8”)
Heavy (5⁄8”)
Heavy (5⁄8”)
Light (½”)
n/a
n/a
T
T
T
Triangle
Triangle
Triangle
Triangle
T
Triangle
T
T
T
T
Gulley Scoops
Gulley Scoops & Box Cleaning Tools
A range of high quality, durable and painted Gully Scoops
A
B
C
Ref
Product code
Description
A
A
B
B
B
700-000071
700-000068
700-000008
700-000070
700-000098
B
B
C
C
C
D
E
700-000099
700-000070
700-000016
700-000033
700-000017
700-000034
700-000015
Mechanical Gulley Grab, 2” Square Head x 1.5m Handle
Mechanical Gulley Grab 2’’ Square Bowl x 1m Handle
Mechanical Gulley Grab 3” Round Head x 1m Handle
Mechanical Gulley Grab 3” Round Bowl x 1.5m Handle
Mechanical Gulley Grab 3 ½” Round Bowl c/w 1.5m
Handle
Gully Grab 5 ¼” Bowl x 1.5m Handle
Gully Grab 3” Bowl x 1.5m Handle
Gulley Scoop c/w vanes, small 3” head
Gulley Scoop c/w vanes, medium 5” head
Gulley Scoop c/w vanes, large 6” head
Gulley Scoop Apple Corer Type
Cleaning Tongs Scissor Action Fence Post Type
E
D
T:
01623 422982
F:
01623 661022
E:
[email protected]
W:
www.hyram.com
48
Listening Sticks
Listening sticks and stethoscopes are available in a choice of materials and
lengths to suit your needs and budget.
A
B
C/D
E
Ref
Product code
Description
A
B
B
C
D
E
F
G
161-000019
023-000094
023-000024
161-000044
161-000014
161-000040
161-000131
161-000151
8” Pocket Stethoscope
Extension Rod 0.50mtr MASP0061290
Extension Rod 1.25mtr
5ft Wooden Listening Stick, Broom Handle type
4ft Wooden Listening Stick, Broom Handle type
4ft Stainless Steel Listening Stick
5ft Diaphram Listening Stick, Angled Head, 3 piece
Bobbin Type Listening Stick, Wooden Head, Stainless
Steel Shaft
F
G
Lead Pipe Crimp Tool
Enables lead pipe to be squeezed, severed and sealed off.
Product code
Description
089-000056
Lead Crimp Tool complete with Hydraulic Hand-pump
Puriton Ferrule Key
Facilitates the installation of Puriton mechanical compression fittings.
Product code
Description
270-000132
Puriton Ferrule Key
General Water Tooling
Quick Release Couplings (Wee Cock)
o Quick release couplings
o Commonly known as a series 21 fitting
o Used widely on logging equipment and gauges
Product code
Quick Release Coupling 379-000048C
379-000049C
Description
Wee Cocks 1⁄8’’ Bsp Male Nickel Plated Couplings
Wee Cocks ¼’’ Bsp Male Nickel Plated Couplings
PTFE Water Tape
12mm x 12m Roll WRC approved PTFE Tape.
PTFE Tape
Product code
Description
729-000002
WRC approved PFFE tape
Silicone Grease
WRAS approved, water repellent and non melting.
Silicon Grease
49
Product code
Description
605-000017
Silicone Grease 500g tub
Available to Hire
Eq ui p ment
& To o lin g
Vertical Valve Injection System
The system adds an innovative step change in application, using proven
pressurised injection technology.
All operations can be carried out from above by removing the cover and
working in the existing chamber.
This has been accomplished by designing an extended drilling and jig system
that allows trained operatives to drill vertically through the valve chamber and
access the valve gland.
Once the drilling and tapping is completed, PTFE gland repair material is injected
into the void to repair the valve.
The Benefits
o No excavation required
o No risk of discolouration
o One team, one visit
Product code
o No interruption to supply
o Increased productivity
o No reinstatement required
Description
130-000206 Vertical Valve Injection System (VVIS)
182-000009 80mm x 16mm Dia. Pellet (Pk10) Expanded PTFE
Ferret - Leak Detection System
Reinventing leak detection…
The Ferret Leak reliably pinpoints leaks on smooth bore service pipelines. The
patented technology provides a fast and accurate method for finding even the
smallest leaks on plastic, copper and lead pipes.
A flexible umbilical cord attached to the Head contains a trace wire that allows
the depth and position of the buried pipeline to be traced and the exact
position of the Head / leak to be located accurately.
Key features…
o Effective in plastic, copper and lead pipes
o Interchangeable Heads for locating leaks in pipes with internal diameters from
10 to 40mm
o Heads pass easily through most types of joints and fittings
o Fifty metre leak location survey from each entry point
o Powered by water pressure
o In-built high resolution flow sensor that quantifies leaks from 0.03 to 25 litres
per minute
o In-built line and end tracing features
The basic principle...
T:
1. Ferret introduced into leaking pipe with head deflated.
2. Head pressurised with water to approximately 1 Bar
above the Drive pressure (pressure in pipe) so that the
head blocks the pipe.
3. Head pressure gradually deflated until it is approximately
the same as the Drive pressure. The Drive pressure will
push the Head along the pipe. As the Head moves along
the pipe, the Winder Handle on the Ferret rotates and the
flow meter records a positive flow.
4. The Head stops when it passes a leak as some of the
Drive pressure is lost as water escapes through the hole in
the pipe. (The Head pressure is now higher than the drive
pressure). The Winder Handle stops rotating and the flow
meter shows the flow through the leak.
01623 422982
F:
01623 661022
E:
[email protected]
W:
www.hyram.com
50
Pumps
Hogg Pumps
Offers a simple, cost effecting method of emptying flooded chambers of water.
Product code
Description
652-000035
652-000036
3’ Blue Hogg Pump
4’ Blue Hogg Pump
Sub Pumps
12v Submersible Pump
Facilitates emptying chambers of water, comes complete with a 12V plug and a
length of hose. Pump is submersible and is suitable for fresh and salt water.
Product code
Description
131-000021
12V Submersible Pump
Ponstar
2 “ heavy duty contractors submersible pump suitable for clean and black water
site drainage:
Product code
Description
131-000022
Ponstar 110v Manual 2" Submersible Pump
A wide range of submersible pumps are available. If you require a different model,
then please discuss your needs with our Sales Office.
Trash Pumps
Wheeler Rex Trash Pumps
Specifically designed pumps for heavy duty applications. Handles solids with
ease and is simple to open and clean. Standard roll cage protects pump and
engine. Steel strainer for intake hose included. Available with either Briggs &
Stratton Intek™ Pro or Honda engines.
Hydrostatic Test Pumps
Rothenberger RP50 Pump
Pressure testing pump for carrying out hydrostatic pressure tests on water
pipework systems.
Maximum Pressure: 60 bar.
Tank capacity:
12 litres
Connection:
½” BSPT
51
Product code
Description
652-000015
161-000069
RP50 Pressure Test Pump
Replacement Gauge
Available to Hire
Eq ui p ment
& To o lin g
An extensive range of moles, moling accessories, towing heads, pipe pushing and
pulling equipment is available both for Sale and Hire.
Ask our Sales Office for Sales and Technical Advice. On-site demonstrations are also
available.
Hy-Ram offer a complete repair service for any manufacture of moling equipment…
Trenchless
Moles & Accessories
Moles
Grundomat Mole
Soil displacement moles for installing underground services, able to bore up
to 50m. The unique reciprocating action stepped-cone chisel head allows
displacement of any obstructions. Available from 45mm up to 180mm diameter.
(45, 55, 65, 75, 95, 110, 130, 145, 180mm)
Mole, Hose and
Lubricator
Mole Accessories
Typical ’Pit to Pit’ Moling Application
Essig Moles
Soil Displacement moles for installing underground services. The ESSIG-IP-Mole
is powered by compressed air, which is supplied by a generator. It is driven
through the soil by a piston inside the body casing. The displacement creates a
bore, in which product pipes or conduits can either be introduced directly with
the mole or installed later.
All machines are fully reversible - no cables or turning needed, simply turn off
the supply of compressed air, pull the hose while reintroducing compressed air.
(sizes - 45, 55, 65, 70, 75, 80, 95, 110, 130, 145mm)
Mole Oil
Lubricant Oil for use with Moles:
Product code
Description
605-000010
605-000015
5l Mole Oil
5l Antifreeze Mole Oil
Moling Boots & Gloves
A range of PPE is available for increased protection in the event of an accidental
strike. Fully insulating electrical gloves and boots have a shelf life of 6 months, at
which time they need to be replaced.
Moling Glove
Dielectric Wellington
T:
01623 422982
F:
01623 661022
E:
[email protected]
W:
www.hyram.com
52
Towing Heads
Standard, Large Diameter & Fuse On Towing Heads
Standard Towing
Head
High Quality Towing Heads for pulling pipe in sizes 22 mm – 355 mm diameter
on both SDR17 & SDR11. Useful for a variety of applications including winching,
directional drilling and dispensing coiled pipe. (SDR 21 & 26 versions available)
Product code
Description
Product code
Description
Product code
Description
Product code
Description
077-000033
077-000039
077-000040
077-000041
077-000042
077-000027
25mm
32mm
40mm
50mm
55mm
63mm
077-000029
077-000034
077-000043
077-000044
077-000028
75mm
90mm
100mm
110mm
125mm
077-000045
077-000037
077-000035
077-000046
077-000061
140mm
160mm
180mm
200mm
213mm
077-000047
077-000048
077-000049
077-000050
077-000051
225mm
250mm
280mm
315mm
355mm
Large Diameter
Towing Head
Fuse on Towing
Head
Large Diameter Towing Heads are available from 400mm up to 630mm. However
above 400mm the following needs to be considered...
o Towing heads are Diameter and SDR specific
o Large Diameter SDR21 & 26 have special gripping requirements and use an
external sleeve
PE Fuse On Towing Heads from 63mm to 500mm. They have sealed eyebolts
and a stepped design at the back for easy butt fusion to either SDR11 or 17.6.
Carrots
Towing Carrot
Towing Carrots (Duct Pulling Eyes), are often used with pneumatic moles.
Product code
Description
077-000025
Towing Carrot 16-32mm
General Towing Equipment
Shackles & Swivels
Swivel Shackle
Range of
Swivels
Bow Shackle
D Shackle
Cable Swivels
Hy-Ram offer a range of high quality cable swivels.
Product code
Description
077-000060
077-000116
077-000158
3 Ton Swivel (3T SWL)
Shackles
Product code
Description
Product code
Description
703-000006
703-000007
703-000008
703-000009
703-000010
703-000011
703-000012
D Shackle 0.5 tonne x ¼” (5⁄16” Pin)
D Shackle 1.0 tonne x 3⁄8” (7⁄16” Pin)
D Shackle 1.5 tonne x 7⁄16” (½” Pin)
D Shackle 2.0 tonne x ½” (5⁄8” Pin)
D Shackle 3.25 tonne x 5⁄8” (¾” Pin)
D Shackle 4.75 tonne x 3⁄8” (7/8” Pin)
D Shackle 6.5 tonne x 7/8” (1” pin)
703-000013
703-000014
703-000015
703-000016
703-000017
703-000018
Bow Shackle 1.5 tonne
Swivel Shackle 0.5 tonne x 5⁄16” dia
Swivel Shackle 1.0 tonne x 3⁄8” dia
Swivel Shackle 1.6 tonne x ½” dia
Swivel Shackle 3.3 tonne x ¾” dia
Swivel Shackle 5.7 tonne x 1” dia
Towing Socks
Towing Socks/Pulling Stockings/Cable Grips can be either single or double eye,
depending on the available anchor points.
53
Size Range (O.D.)
Single Eye Type
Double Eye Type
Size Range (O.D.)
Single Eye Type
Double Eye Type
10-13mm
13-19mm
19-25mm
25-38mm
077-000125
077-000126
077-000127
077-000128
077-000133
077-000134
077-000135
077-000136
38-50mm
50-63mm
63-89mm
89-115mm
077-000129
077-000130
077-000131
077-000132
077-000137
077-000138
077-000139
077-000140
Available to Hire
Eq ui p ment
& To o lin g
Flow
Stopping
Hy-Ram supply a comprehensive range of products for flow stopping in water and gas
mains including PE pipe squeezing (page 17), bagging of and freezing techniques.
Gas Flow Stopping Equipment
Gas Bags
Kitemarked & WASK approved E4 Gas Bags
Sarco Stopper is the only manufacturer of Gas Bag Stoppers made to UK GIS/
E4:2006 that are tested and approved by both WASK for use in their Teeset
equipment and also by BSI to Kitemark product quality standards and fully
acceptable to all gas company requirements.
The Sarco Resistra™ Self Centring E4 Gas Bag Stopper in sizes from 50mm up to
300mm and larger sizes on request are suitable for use in pressurised Gas Mains
in Cast Iron, Ductile Iron, Steel and Polyethylene (PE) pipes operating at 75mbar
pressure in the UK (higher pressure options are also available).
Sarco Stopper has manufactured these safety critical products in the UK for
more than 40 years and has a world wide reputation for high quality stoppers.
The Resistra E4 Gas Bag has an outer cover in High Visibility Yellow Nylon with a
specially formulated PU coating to ensure easy deployment and maximum wear
resistance. The inner bladder being made of pure quality Latex and the Resistra
semi rigid spine curvature ensuring simple deployment, uniform bag inflation
and self centring feature. The key bag neck joint with ½” UNF female connector is
produced using computer assisted techniques ensuring a constant level of high
quality joint.
All bags carry the Kitemark & WASK approval markings and are leak tested prior
to despatch. Packed in standard sized packs of 10 in clear protective polythene,
a comprehensive information and instruction card is also enclosed to assist safe
working and best operating practice.
Product code
Description
Product code
Description
Product code
Description
Product code
Description
001-000001
001-000002
001-000003
001-000004
001-000005
Gas Bag 2”
Gas Bag 3”
Gas Bag 4”
Gas Bag 5”
Gas Bag 6”
001-000006
001-000007
001-000009
001-000010
001-000011
Gas Bag 7”
Gas Bag 8”
Gas Bag 9”
Gas Bag 10”
Gas Bag 12”
001-000015
001-000018
001-000016
001-000019
001-000020
Gas Bag 14”
Gas Bag 15”
Gas Bag 16”
Gas Bag 17”
Gas Bag 18”
001-000021
001-000022
001-000023
001-000024
001-000025
Gas Bag 20”
Gas Bag 21”
Gas Bag 22”
Gas Bag 24”
Gas Bag 30”
Gas Bag Pump
Used for inflating gas bags – available in plastic or brass.
Product code
T:
01623 422982
F:
01623 661022
E:
Description
652-000018
Gas Bag Pump – Brass (Requires an adaptor)
300-000011
Gas Bag Pump adaptor (Brass Pumps)
[email protected]
W:
www.hyram.com
54
Water Flow Stopping Equipment
Aquastop
Aquastop & Hydrant Wizard – ‘Water’ Line Stopping Systems…
Introduction…
Hy-Ram is proud to be an ‘official distributor’ for the complete range of WASK Gas
and Water equipment. WASK is a leading supplier of specialist Gas / Water fittings
and equipment and has been serving the utilities market in excess of 120 years.
Similar to Hy-Ram, WASK has earned a reputation for developing technically
innovative products in collaboration with leading international utility companies.
Two such products are detailed below… Aquastop and Hydrant Wizard: Products
developed in conjunction with Sarco Stopper.
Aquastop…
Flow stopping a water main enables live sections of main to be isolated for
maintenance or repair thus minimising the disruption to customers’ supplies.
WASK Aquastop can be used to line-stop cast and ductile iron, PE and PVC water
pipes up to 8” (200mm) diameter and 8 bar pressure.
Typical Aquastop ‘set-up’
Viking Johnson Drilling Saddle
used exclusively for Aquastopping
metallic mains
Product code
Description
AC0264
WASK Aquastop Kit
Aquastop – Key Features & benefits…
o Lightweight and compact in comparison to alternative equipment, resulting in
ease and speed of handling and ability to work in spaces with restricted access
including vertical pipework.
o Small diameter access holes result in reduced cost of consumable cutters as well as
closure fittings and allows quicker installation than conventional methods.
o The ability to localise a repair ensures a minimum disruption to customers. The
distance between isolation valves may be long and in this case, the number of
customers deprived of water can be considerable.
o Automatic, pressure balanced headwork means that the effort required
to launch and inflate the Sarco Aqua Hydro® bags remains low even with
increasing or fluctuating pressures, allowing the operator to concentrate on
the job in hand.
o Use of bypass allows minimum or no interruption to supply across stop off on
the majority of mains, including single fed mains.
o Sarco Aqua Hydro® bags are inflated utilising the water pressure from the
main. No additional power source is required for operation of the unit. The
danger of over or under inflating the bags is eliminated.
o Equipment is easily sterilised before each use and is made from non-corroding
materials.
Aquastop Operational diagram
55
Available to Hire
Eq ui p ment
& To o lin g
Hydrant Wizard
Hydrant Wizard…
The Hydrant Wizard has been designed to enable defective fire hydrants to be
exchanged – ‘underpressure’.
Previous practices for exchanging a hydrant involved shutting down the main
either by closing valves or using traditional line-stopping techniques. However,
valves could often be some distance away so that supplies to customers would
be interrupted. In addition, both these methods of shutting down and restoring
supply could disturb sediment in the main leading to complaints regarding
water quality.
Product code
Description
AC0304
WASK Hydrant Wizard
Hydrant Wizard – Key Features & benefits…
o During development of Aquastop, a need for stopping off of hydrants was
also identified. This also required developing a stopper bag jointly with Sarco
Stopper resulting in the Sarco Mini Hydro® Bag
o Only the Hydrant is isolated; the flow in the main is not interrupted
o Supply and water quality are unaffected and sediment in the main is not
disturbed
o Excavation is restricted to the area around the hydrant minimising the cost of
labour and materials
o The small diameter access hole does not compromise the integrity of the pipe
The only consumables are the Sarco Mini Hydro® Bag and the Mini Golf Saddle
which remains on the hydrant leg
o Easy to transport in small vehicle
o Prep tool enables easy access for the Sarco Mini Hydro® Bag regardless of
tuberculation
o The equipment is compact and lightweight and suitable for confined areas
o Sarco Mini Hydro® Bags are inflated utilising the water pressure from the main.
No additional power source is required for operation of the unit. The danger of
over or under inflating the bags is eliminated
o Equipment is easily sterilised before each use and is made from non-corroding
materials
Hydrant Wizard in use (Horizontal)
Hydrant Wizard in use (Vertical)
Hydrant Wizard Operational diagram
T:
01623 422982
F:
01623 661022
E:
[email protected]
W:
www.hyram.com
56
Jet Freezer
Portable Pipe Freezing Equipment
Jetfreezer reduces downtime and cost by eliminating the need to drain down pipe work
before maintaining, repairing or extending a system. Utilising the intensely cold properties
of solid carbon dioxide, Jetfreezer rapidly and economically creates a positive ice plug in the
required work area.
Jetfreezer Kits
Jetfreezer is available in a range of competitively priced kits to meet the needs of all users.
Outside diameter of pipe to freeze (mm)
Product code
Description
8 – 15mm
159-000008 Jetfreezer Mini
4
159-000009
159-000010
159-000004
159-000011
4
4
4
4
Jetfreezer Senior
Jetfreezer Senior Plus*
Jetfreezer Professional
Jetfreezer Professional Plus*
16 – 22mm
23 – 42mm
4
4
4
4
4
4
*Double Freeze Kits (2 jackets)
80mm and 100mm Freezes can be achieved using Professional kit and using an extra 2.4m
High Pressure hose (359-000112) and Tee Piece (301-000048) and choice of bag (Either 4380mm or 81mm-100mm)
.
Jetfreezer Jackets & Accessories
Picture Shown: Professional Kit
Product code
Jacket
Product code
Accessories
001-000017
001-000008
001-000014
001-000034
001-000036
8 – 15mm
10 – 22mm
23 – 42mm
43 – 80mm
81 – 100mm
359-000112
301-000048
904-000018
021-000001
760-000074
2.4 m high pressure hose
Tee Piece
Protective gloves
Spring balance
Metal bonded washer
Arctic Polar Kits
Polar® Freezing Kits
Polar®
Professional The Polar Freezing system is used in conjunction with a disposable canister of high performance
freezing spray. The kits are packed in convenient carrying cases and incorporate gas canisters and
jackets for double freezes. An easy to use weighing scale is included to ensure optimum gas usage.
In addition, kits
contain:
Product code
Description
Pair 8-15mm
Jackets
159-000002
159-000001
159-000003
159-000007
Polar® Professional
Polar® Commercial
Polar® Commercial Plus
Polar® Industrial
C
D
I
E
F
G
J
57
Pair 28-35mm
Jackets
4
4
4
4
4
4
4
4
Spares & Accessories
A
B
Pair 15-22mm
Jackets
4
4
4
Pair 35-42mm
Jackets
Pair 42-61mm
Jackets
4
Ref
Product code
Description
A
B
C
D
E
F
G
H
I
J
045-000062
182-000003
182-000002
182-000007
182-000010
182-000011
021-000002
310-000048
379-000050
643-000169
Polar® Canisters 700g
Polar® Freezing Jacket 8-15mm (Yellow)
Polar® Freezing Jacket 15-22 (Green)
Polar® Freezing Jacket 28-35mm (Red)
Polar® Freezing Jacket 42mm (White)
Polar® Freezing Jacket 54& 61mm (Black)
Polar® Dosing Scale
Polar® T-Piece
Polar® Valve
Polar® 1m Nylon Tube
4
Spray Canisters
1
1
2
2
H
Safety note…
PPE including Protective gloves (904-000018) and eyewear should always be worn when
handling dry ice to prevent the possibility of frost bite or ‘cold burns’ arising when dry ice is in
contact with the skin.
Available to Hire
Eq ui p ment
& To o lin g
From Spanner and hammers, cleaning straps and shovels, to cable avoidance
equipment… Hy-Ram offer a comprehensive range of tools and equipment for the
pipeline utility operative. Representing a very wide range, we source quality, industry
preferred products including Draper, Bulldog, Steve Vick, Radiodetection, Cobra and so
on.
General
Tooling
General Tools
Cable Detection & Avoidance
Hy-Ram are an official agent for supply of Radiodetection equipment.
Cable Avoidance Tools
The C.A.T (Cable Avoidance Tool) can detect signals naturally radiating from
metallic services or the Genny can be used to apply a distinctive signal that the
C.A.T can detect. The C.A.T and Genny has become the industry standard pipe
and cable avoidance tool, recognised as the leader providing performance,
ruggedness and reliability, together with affordability and low cost of ownership.
C.A.T.
StrikeAlert™ Option
Genny
Copyright 2009 Radiodetection Ltd - SPX Corporation. All rights reserved.
Radiodetection is a subsidiary of SPX Corporation. SPX and Radiodetection
are trademarks of Radiodetection Ltd. and SPX Corporation. Due to a policy of
continued development, we reserve the right to alter or amend any published
specification without notice. This document may not be copied, reproduced,
transmitted, modified or used, in whole or in part, without the prior written
consent of Radiodetection Ltd.
Key features
o Precision locate
o Optimised locate
o Avoidance Scan
o Strike Alert
o Data download
o GPS
Product Benefits
o Enhanced signal processing providing the C.A.T4 with ability to reject
unwanted signals.
o Cutting edge technology ensures fastest possible processing of data.
o Real sound
o Optional Strike alert
o Avoidance scan
Tracer Rod & Sondes
EZiROD Duct Tracer
Fibre glass sheathed copper conductor which is pushed along non-metallic
services and a signal is applied using a signal generator to allow them to be
located using a CAT.
EZiROD Duct Tracer
Product code
Description
023-000226
023-000227
023-000228
EZiROD 30m Tracer Rod
Sonde
Battery powered transmitter that can be connected to a simple drain rod system.
The signals are used to indicate the position when inserted into an underground
service.
Sonde
T:
01623 422982
F:
01623 661022
E:
Product code
Description
905-000023
EZiSYSTEM Sonde
[email protected]
W:
www.hyram.com
58
Cobra Rods / Reels
Cobra – Conduit Rods & Steel Frame Reels
Continuous Fibreglass Rods, also known as Cobras or Duct Rods, are used in pipe
and duct laying operations to assist with the installation of draw ropes, cables
and winch wires. They can also be used as part of a CCTV or pipe cleaning
system.
Cobra Rods / Steel Frame Reels
Product code
Description
023-000203
023-000204
4.5mm Cobra Reel 30m long c/w frame
023-000215
023-000216
9mm Cobra Reel 120m long c/w frame
023-000205
023-000217
023-000206
023-000218
023-000207
023-000219
023-000208
023-000220
023-000209
023-000221
023-000210
023-000222
023-000211
023-000223
023-000212
023-000224
023-000213
023-000225
023-000214
Insertion Trumpets
This cost effective simple product prevents expensive damage to PE pipes from
the “cut” edge of the existing pipe during insertion.
Product code
Description
157-000004
157-000001
157-000002
157-000005
157-000006
157-000007
157-000008
157-000009
3” Insertion Trumpet
PVC
PVC
PVC
PVC
Fibreglass
Fibreglass
Fibreglass
Fibreglass
Soil Pick
The Soil Pick© is a selective excavator. Selective in the sense that it fractures,
pulverizes and displaces porous and semi-porous soils, yet leaves nonporous
objects unaffected. The Soil Pick excavates soil without risk of damaging buried
utilities.
The Soil Pick employs converging/diverging nozzle technology to accelerate
compressed air to supersonic speed (to 1500 mph). The high velocity air stream
travels approximately 4 inches from the distal end of the Soil Pick - “the cutting
edge” - before decompressing to atmospheric pressure with sufficient violence
to pulverize and displace soil.
Non-conductive, non-sparking tools are of obvious benefit to those working
in environments that may be gas enriched and/or are in close proximity to live
electric lines.
59
Product code
Description
658-000001
658-000002
658-000003
SP80 Soil Pick
SP125 Soil Pick
SP160 Soil Pick
Available to Hire
Eq ui p ment
& To o lin g
Bosher Bar
Used for breaking up old pipework using a 10kg head. Available in two sizes.
Product code
Description
905-000024
905-000034
905-000025
54” Bosher Bar (Fat Ended)
78” Bosher Bar (Fat Ended)
78” Bosher Bar (Narrow Ended)
Shovels
Bulldog Shovels
Hy-Ram are official stockists of British-made Bulldog Shovels.
Newcastle Draining Tool
Cable Laying Shovel
No.2 S/S
Sq. Mouth
No.2 S/S
Taper Mouth
Taper Mouthed Shovel
Description
BULL5GSPL
BULL5NDPL
BULL5CLPL
BULL5TMPL
General Service Shovel
Newcastle Draining Tool Treaded Graft
Cable Laying Shovel
Taper Mouthed Shovel
The full range of Bulldog tooling is available, please contact our Sales Office to discuss
your requirements.
General Service Shovel
No.2 S/S
Round. Mouth
Product code
No OOO S/S
Sq. Mouth
PolyFibre Pro
Designed to offer a high degree of fibreglass strength along
with the comfort of a profile moulded PYD hand grip.
Shocksafe – Insulated – BS8020:2002
Every tool is flash tested to 10,000 Volts before the issue of a certificate, unique to
each implement. Insulated to BS 8020:2002
Polyfibre PRO
No0 GPO
Trencher
S/S Cable
Layer
Treaded S/S
Treaded
Spade
General Service
S/S Clay Grafter 16” Newcastle
Drainer
Polyfibre PRO
Shocksafe
Shocksafe
Description
905-000039
905-000049
No.2 S/S Sq. Mouth
905-000040
905-000050
No.2 S/S Taper Mouth
905-000041
905-000051
No.2 S/S Round. Mouth
905-000042
905-000052
No OOO S/S Sq. Mouth
905-000043
905-000053
No0 GPO Trencher
905-000044
905-000054
S/S Cable Layer
905-000045
905-000055
S/S Clay Grafter
905-000046
905-000056
16” Newcastle Drainer
905-000047
905-000057
Treaded General Service
905-000048
905-000058
Treaded S/S Spade
Please note other handles are available ie Wooden, all steel & fibreglass. Please enquire
with our sales team.
The full range of Carters products is available. Please contact our sales team.
Continuity Bonds
Temporary continuity bonds to be used when disconnecting or reconnecting
pipework in circumstances where a spark could cause a hazard.
Product code
Description
100-000058
Continuity Bond Service 1.2m with end chain
100-000043
Continuity Bond Service 1.2m with crocodile clip
100-000059
Continuity Bond Mains 7.5m with end chain
100-000010
Continuity Bond Mains 10m with end chain
Continuity bonds can be provided with test certification and tagging if required.
T:
01623 422982
F:
01623 661022
E:
[email protected]
W:
www.hyram.com
60
Pipe Cleaning Straps
Wheeler Rex Pipe Cleaning Straps
Highest quality pipe cleaning strap available in two lengths. A versatile scraper
for removing mud and scale from pipe surfaces. Generally used prior to pipe
cutting, drilling or the assembly of a pipe fitting. Angled blades promote self
cleaning. Belt material is light, strong and non-corroding. Offers better scraping,
cleaning & longevity than alternative studded type straps.
Product code
Description
WHE1300
WHE1350
Pipe cleaning strap (3” - 12” diameter pipe)
Pipe cleaning strap (12”- 36” diameter pipe)
Bursting Wedges
Bursting wedges in a choice of two sizes. Particularly useful for maintaining the
‘gap’ when carrying out pipe cutting or splitting metallic pipe sockets.
Product code
Description
084-000003
084-000004
Bursting wedge – standard – ½” thick
Bursting wedge – large – 1” thick
Extractor SHIMS
Push Fit Extractors
Facilitates the removal of pipe from pushfit fittings. The same size tool is used for
both metric and imperial pipe.
Product code
Description
300-000095
300-000096
300-000097
300-000121
300-000108
300-000098
300-000099
300-000100
300-000101
20mm Pushfit Metal Extractor (set of 2)
Draper Tooling
Draper Hand Tools
Hy-Ram are proud to stock a wide range of hand tools from the
extensive Draper range of over 7000 products. Please contact our Sales
Office with your enquiry.
OFFICIAL
D I S T R I B U TO R
Ratchets
Socket Sets
Torque Wrenches
Specialist Spanners
Allen Keys
61
General Hand Tools
Screw Drivers
Hacksaws
Available to Hire
Eq ui p ment
& To o lin g
Coil Pipe Bags
Durable bags for the transport and protection of PE pipe coils.
Product code
Description
001-000037
001-000038
001-000039
001-000040
20mm Outside Diameter Coil Pipe Bags
Bespoke Bags
Hy-Ram offer a range of bespoke bags to meet your needs. A wide variety of
colours are available, and any size and specification can be achieved. Customers
logos can also be printed in a multitude of colours and sizes. Bags can be made
to customer designs.
Pry Bars
Draper Expert - 3 Piece Soft Grip Pry Bar Set
Set of 3 Pry bars, chemically blacked blades with impact resistant, soft grip
handles. Set contains 300mm, 450mm and 600mm long bars.
Soft Grip Pry Bar Set
Draper 4 - Piece Pry Bar Set
Set of 4 Pry bars, chemically blacked blades with PVC handles. Set contains
200mm, 300mm, 450mm and 600mm long bars.
Pry Bar Set
Jumbo Pry Bar 36”
A massive 900mm of Pry Bar for use when you really need leverage.
Manufactured from Chrome Molybdenum for extra strength.
Jumbo Pry Bar Set
Product code
Description
DRAP88636
DRAP35396
023-000157
3 Piece Soft Grip Pry Bar Set
4 Piece Pry Bar Set
Jumbo Pry Bar 36”
Site Tools
One Hand Pipe Wrenches
Product code
Description
711-000081
711-000058
711-000075
7” One Hand Pipe Wrench
Podger Spanners
High quality double sized Podger Ratchet Spanner.
T:
01623 422982
F:
01623 661022
E:
Product code
Description
673-000007
673-000008
24-30mm Podger Spanner
32-36mm Podger Spanner
[email protected]
W:
www.hyram.com
62
Pipe Threaders
Rothenberger Supertronic 2000
High performance threading with versatile applications without a vice.
15-25 RPM threading with 60 RPM geared reverse. All sets supplied with a robust
carrying case. Threads ½”, ¾”, 1”, 1¼”, 1½”, 2”.
Supertronic 2000
Amigo 2
Product code
Description
117-000161
Rothenburger Supertronic 2000 Portable Power Threader
½” - 2” 110v
Rems Amigo 2 Portable Power Threader
Electric die stock with quick-change die heads. Powerful, easy-to-operate
electric tool for threading with unique, patented support bracket. Ready for use
anywhere, without vice. Pipe threads 1⁄8–2”, 16–50 mm. Bolt threads 6–30 mm,
¼–1”. REMS Amigo 2 – extremely strong up to 2”.
Product code
Description
117-000227
REMS AMIGO Pipe Threader
Swaging Tools
Swaging Tools
For use on copper pipe for expanding pipe ends.
Product code
Description
129-000003
129-000004
129-000011
129-000007
½” -¾” (15-22mm) Swaging Tool
1” (28mm) Swaging Tool
1 ¼” (35mm) Swaging Tool
1 ½” (42mm) Swaging Tool
Measuring Tools
Callipers
Stiff Joint Pipe Callipers
Stiff joint pipe callipers come with riveted joints, hardened points and are
available in a range of sizes.
Product code
Imperial Max Size
072-000008
6”
072-000003
12”
072-000004
20”
072-000005
24”
072-000006
36”
072-000012
40”
072-000010
48”
Other sizes available
Metric Max size
150mm
300mm
500mm
600mm
900mm
1000mm
1200mm
Circumference Tapes
Circumference Tape
For measuring the diameter or circumference of pipes and cylindrical objects.
A
B
C
63
Ref
Product Code
Description
A
B
C
WHE71
072-000017
072-000019
6ft (1.82m) Diameter Tape
2m Circumference Tape Steel Blade Black Etched
5m Nylon Coated Steel Diameter Tape
Available to Hire
Eq ui p ment
& To o lin g
Measuring wheels
Analogue Measuring Wheel
Analogue
Measuring Wheel
Product code
Description
161-000169
Draper Expert Measuring Wheel
Digital Measuring Wheel
Digital
Measuring
Wheel
Product code
Description
161-000108
Digital Measuring Wheel
Impact Soil Tester
Clegg Impact Soil Testers
4.5 Kg Clegg Impact Soil Testers:‘Classic’ CIST/882 Models & Data logging CIST/883
For accurate Compaction Control Testing During Trench Reinstatement.
The 4.5Kg Clegg Impact Soil Tester types CIST/882 and CIST/883 provide an
easy means for measuring soil compaction and strength during trench reinstatement.
Described in the Design Manual for Roads and Bridges (DMRB) the Tester
provides a compact instrument for monitoring the quality of reinstatements insitu while work proceeds, avoiding the need for later re-excavation.
Clegg Tester
Product code
Description
905-000021
905-000022
045-000217
4.5kg Model 882 Clegg Impact Soil Tester
4.5kg Model 883 Clegg Impact Soil Tester
Wooden Box to Suit
Pressure Gauges
We have a large range of gauges available for different applications and pressure
range requirements.
Product code
Description
161-000069
161-000097
Replacement Gauge to suit Rothenberger P50 pump
Replacement Gauge to suit Low Pressure Cowhorn
replacement Gauge - Dry
Replacement Gauge to suit Medium Pressure Cowhorn
replacement gauge - Dry
Replacement Gauge to suit High Pressure Cowhorn
replacement gauge - Dry
Pressure Gauge Test Cert
161-000098
161-000135
Wide Range of Pressure Gauges
161-000143
Digital Pressure Gauges
Hy-Ram offers the Kobold range of digital pressure gauge for use when pressure
testing water mains. Commonly supplied with ¼” BSP bottom entry. Gauges
come in a wide variety or pressure ranges including 2.5, 4, 6, 10, 16 & 25 bar.
T:
01623 422982
F:
01623 661022
E:
[email protected]
W:
www.hyram.com
64
Safety & Security
Volt Sticks
Checks the presence of an AC voltage, without making any disconnections in
cables, wall sockets, fuses, circuit breakers, junction boxes, etc. No current flow is
needed for correct operation. This high sensitivity version (testing down to 50v)
is also intrinsically safe, making it an essential ‘life-saver’ testing tool for utilities
engineers as well as for use in hazardous areas.
Product code
Description
747-000001
ATEX AC Voltage Stick LV50
Metal Detectors
WASP
The WASP box locator is an industry standard metal detector within the water industry.
Product Features
o Non-motion metal detector
o Two simple tuning controls
o Built-in loudspeaker
o Headphone socket
o Telescopic shaft
o ‘DD’ search coils
o Waterproof 20cm search head
o High visibility casing
o 20 hours’ use from 1 x PP3 battery
o Dismantled length: 74cm
o Fully extended length: 136cm
o Weight: 1.1kg
Product code
Description
161-000058
WASP Metal Detector
Internal Pipe Cleaning
Christmas Tree Scrapers
For use in metallic pipes, Christmas Tree Drag Scrapers remove hard deposits as
they are winched through. Available for all pipe sizes from 3” to 36”.
Clamped
Bolt On
Product code
Description
Product code
Description
700-000086
700-000084
700-000113
700-000091
700-000114
700-000115
700-000116
700-000117
700-000118
700-000119
700-000120
700-000121
700-000122
Clamped 3” dia
Clamped 4” dia
Clamped 5” dia
Clamped 6” dia
Bolt-on 3” dia
Bolt-on 4” dia
Bolt-on 5” dia
Bolt-on 6” dia
Bolt-on 7” dia
Bolt-on 8” dia
Bolt-on 9” dia
Bolt-on 10” dia
Bolt-on 12” dia
700-000123
700-000124
700-000125
700-000126
700-000127
700-000128
700-000129
700-000130
700-000131
700-000132
700-000133
700-000134
700-000135
Bolt-on 13” dia
Bolt-on 14” dia
Bolt-on 16” dia
Bolt-on 18” dia
Bolt-on 20” dia
Bolt-on 22” dia
Bolt-on 24” dia
Bolt-on 26” dia
Bolt-on 28” dia
Bolt-on 30” dia
Bolt-on 32” dia
Bolt-on 34” dia
Bolt-on 36” dia
Wire Brush Pull Through
Wire Brush Pull Through
For use in metallic pipes, Wire Brush Pigs remove loose debris. Available for all
pipe sizes from 3” to 12” they can be used after pulling through a drag scraper to
remove any loosened deposits.
65
Product code
Description
Product code
Description
654-000072
654-000014
654-000073
654-000074
654-000075
3” Wire Brush Pig
4” Wire Brush Pig
5” Wire Brush Pig
6” Wire Brush Pig
7” Wire Brush Pig
654-000076
654-000077
654-000078
654-000079
8” Wire Brush Pig
9” Wire Brush Pig
10” Wire Brush Pig
12” Wire Brush Pig
Available to Hire
Eq ui p ment
& To o lin g
Plungers
Plungers
For use in metallic and plastic pipes, Plungers remove debris and fluids. Available
for all pipe sizes from 3” to 36”, there are three types: single disk, double disk and
articulated. The articulated unit has a flexible joint between the disks, for use in
pipes where bends may be tight.
Double Plunger
Articulated
Size
Single
Double
Articulated
3”
4”
5”
6”
7”
8”
9”
10”
11”
12”
14”
15”
16”
18”
20”
22”
24”
26”
28”
30”
32”
34”
36”
648-000045
648-000046
648-000047
648-000048
648-000049
648-000050
648-000051
648-000052
648-000053
648-000054
648-000055
Not Available
648-000056
648-000057
648-000058
648-000059
648-000060
648-000061
648-000062
648-000063
648-000064
648-000065
648-000066
648-000022
648-000023
648-000024
648-000025
648-000026
648-000027
648-000028
648-000029
648-000030
648-000031
648-000032
648-000033
648-000034
648-000035
648-000036
648-000037
648-000038
648-000039
648-000040
648-000041
648-000042
648-000043
648-000044
648-000067
648-000068
648-000069
648-000070
648-000071
648-000072
648-000073
648-000074
Not Available
648-000075
648-000076
Not Available
648-000077
648-000078
648-000079
648-000080
648-000081
648-000082
648-000083
648-000084
648-000085
648-000086
648-000087
Foam Swabs
Foam Pig Range
Apart from maintenance activities, our foam pig range can be used for pipeline
proving, clearing accumulated debris and deposits, ensuring unhampered precommissioning work scopes.
Soft Foam Swabs
Foam swabs for clearing dirt and excess water from pipes made from any
material. Available in two densities with or without a hard plastic drive plate.
Density
T:
01623 422982
F:
01623 661022
E:
Size
Soft Foam
Soft Foam with
Drive Plate
Hard Foam
Hard Foam with
Drive Plate
2"
3"
4"
5"
6"
7"
8"
9"
10"
11"
12"
15"
16"
18"
654-000016
654-000017
654-000018
654-000019
654-000020
654-000021
654-000022
654-000023
654-000024
654-000025
654-000026
654-000027
654-000028
654-000029
654-000044
654-000045
654-000046
654-000047
654-000048
654-000049
654-000050
654-000051
654-000052
654-000053
654-000054
654-000055
654-000056
654-000057
654-000030
654-000031
654-000032
654-000033
654-000034
654-000035
654-000036
654-000037
654-000038
654-000039
654-000040
654-000041
654-000042
654-000043
654-000058
654-000059
654-000060
654-000061
654-000062
654-000063
654-000064
654-000065
654-000066
654-000067
654-000068
654-000069
654-000070
654-000071
[email protected]
W:
www.hyram.com
66
Pipe Fittings &
Valves
Hy-Ram has built up a range of ‘specialist’ Drilling Saddles and Valves
to provide cost effective solutions to ‘real’ problems within the Water
industry.
Working in collaboration with leading UK Water Companies and Contractors, Hy-Ram has designed
and developed ‘niche’ products utilising ‘underpressure’ techniques for a variety of applications
including new branch connections, retro-fitting fire hydrants and pipe-wall sampling.
In more recent years, Hy-Ram have also taken on other ranges including Stainless Steel Repair products,
Flange Adaptors and Pipe Couplers, polyethylene Electrofusion Fittings and the latest in kitemarked® Gas
Gate Valves.
With regionalised stocks on all ranges – our Sales and Technical teams are waiting to assist…
67
Pipe Fittings & Valves
Hy-Ram offer a range of water valves, fittings and drilling saddles for a variety of
specialist applications.
Our progression is led by innovation and designing products that provide solutions to
real problems consequently our range continues to grow.
Specialist
Valves &
Saddles
Hi-Flow Drilling Saddles
The System
The Hy-Ram ’Hi-Flow’ System consists of a Drilling
Saddle, Flanged Riser Tube and the LR67 Drilling
Machine. The system allows underpressure
installation of fire hydrants onto existing mains,
avoiding shutdown and subsequent recharging.
It is also an ideal method of installing Flushing
Points adjacent to ’normally kept shut’
boundary valves.
The system enables holes up to 67mm diameter to be cut into
pressurised water mains, giving excellent flow rate characteristics. The
versatility of the system will allow for other applications in the water
network.
The Benefits
o Underpressure installation with no shut down
o Excellent flow rate characteristics
o Robust pipe clamp gives a rigid base for mounting accessories
o Supports the pipe material in the area of the drilled hole
o Simple and quick to install
o Substantial cost savings
o Suits CI, DI, PVC and certain AC pipes up to
12” / DN300
Application / Specification
o Designed for all potable water and wastewater
applications up to a working pressure of 16 bar
o All materials and coatings are WRAS approved
The Identified Uses
o Underpressure installation of a fire hydrant
o Underpressure installation of an ’OXO’ type flushing point
either side of a boundary valve. (In the case of both the above
applications, it makes future changing of the hydrant achievable
without the need to shut down)
o Taking samples from the top of the pipe wall (67mm coupon).
o Forming a by-pass for the installation of a PRV or water meter
o Underpressure access into the main, for example leak detection
(Hydra phone) insertion point CCTV insertion point, Probe insertion
point, Flow meter, Chlorination point, Temperature monitor point,
Chemical analysis point, Correlator point
New...
Series III - with 80mm clear bore...
With the advent of ‘through bore’ fire hydrants, Hy-Ram introduce the
LR67 Drilling Machine NEW Hi-Flow Drilling Saddle for pipe sizes 3”NB to 12”NB complete
with PN16 - 80mm flanged outlet and 80mm clear bore.
Following the initial concept of simplicity and ‘one fitting does all’
the Hi-Flow remains a single fitting. There is no need for doubling up
or using two fittings… adding in an extra flanged joint and greater
potential for leaks..
Key benefits of the NEW Series III...
o Clear 80mm vertical bore
o ‘Solid’ Under-Clamp ensuring good connection to the main
o The Hi-Flow bolts directly to the main and offers a low ‘stack height’
o No retraining is required for the Series III... the installation method
Hi-Flow Drilling Saddle
and drilling equipment remains the same
NEW Series III - with 80mm
o
Existing Drilling Equipment can be used with no modifications
clear bore
o Pressure rating 16 bar, WRAS approved components and coating
T:
01623 422982
F:
01623 661022
E:
[email protected]
W:
www.hyram.com
68
Hi-Flow Drilling Saddles
Hi-Flows for use on Metallic and certain AC pipes:
DN mm
DN
inch
Pipe Tol.
mm (OD)
Hi-Flow for
Metallic/AC
Bottom Sampling
for Metallic/AC
Hi-Flow for PVC
Bottom Sampling
for PVC
80mm
100mm
125mm
150mm
175mm
200mm
225mm
250mm
300mm
3”
4”
5”
6”
7”
8”
9”
10”
12”
88-103
114-125
140-153
168-180
193-208
219-235
244-262
273-290
324-338
080-000064
080-000065
080-000066
080-000067
080-000068
080-000069
080-000070
080-000071
080-000072
080-000074
080-000075
080-000092
080-000076
080-000093
080-000086
080-000087
080-000088
080-000110
080-000077
080-000078
080-000079
080-000080
080-000081
080-000082
080-000083
080-000084
080-000085
080-000112
080-000113
080-000114
080-000115
080-000116
080-000117
080-000118
080-000119
080-000120
110mm and 160mm Outside Diameter Hi-Flows for use on PVC pipes:
OD mm
L mm
110mm
180
160mm
210
80mm Bore Hi-Flow:
Hi-Flow
Drilling
Saddle
NEW Series III
- with 80mm
clear bore
H mm
Product code
190
210
080-000108
080-000109
DN mm
DN inch
Pipe Tol. mm (OD)
Hi-Flow for Metallic/AC
Hi-Flow for PVC
80mm
100mm
125mm
150mm
175mm
200mm
225mm
250mm
300mm
3”
4”
5”
6”
7”
8”
9”
10”
12”
88-103
114-125
140-153
168-180
193-208
219-235
244-262
273-290
324-338
080-000245
080-000246
080-000247
080-000248
080-000249
080-000250
080-000251
080-000252
080-000253
080-000259
080-000260
080-000261
080-000262
080-000263
080-000264
080-000265
080-000266
080-000267
Top & Bottom Sampling of the Pipe Wall
By accessing the pipe just from the top, but taking samples from both
top and bottom whilst the pipe is underpressure.
The Benefits
This unique system enables a coupon to be taken from both the top and
bottom of the pipe via two passes of the drilling spindle. Analysis of the
coupons enables decisions to be made regarding whether the pipe has
been previously lined and gives an indication of the condition, hence rehabilitation programs can be planned.
Normally the pipe would have to be shutdown and drained and a section
cut out. The cost savings are substantial!
69
FIG 1
FIG 2
FIG 5
FIG 6
FIG 3
FIG 7
FIG 4
FIG 8
Pi p e
Fi t t i n gs
& Va lves
Sandwich Valve (MKI, MKII & New MKIII)
The Identified Uses
o Fitted under a Fire Hydrant or Air Valve to facilitate cleaning, changing and
removal underpressure, without shutdown. This minimises disruption and
potential contamination
o Normally open ’in line’ shut off valve
o Underpressure drilling (holesaw up to 67mm diameter) through any
Underpressure Tee having DN80 flanged outlet
o As an access point into the main for insertion of:
• Leak Detection Equipment
• Hydraphone
• Fibrescope / CCTV
• Probe Insertion Point
• Flow Meter
• Chlorination Point, etc
MkI DN80 Sandwich Valve
MkI DN80 Sandwich Valve
Typical Application
The Benefits
o Can be installed in a variety of situations in order to minimise future
shutdowns
o Simple and quick to install
o Excellent for use in tight access trenches where other services may be causing
an obstruction
o Face to face dimension of only 36mm compared to 203mm for a traditional
BS:5163 R.S. Gate Valve
o Requires minimal excavation when used in conjunction with an Underpressure
Tee and Drilling Machine
o Due to competitive pricing, more valves can be afforded within the network,
giving greater flexibility and better control
Application / Specification
o All materials and coatings are WRAS approved
Product code
Description
379-000037
250-000020
379-000038
379-000061
MkI 80mm / 3” Sandwich Valve (Max 10bar application)
M16x65 Cap Head Bolt Set (3no.)
MKI 80mm / 3” Sandwich Valve c/w M16x65 Cap Head Bolt Set
MKII Studded 80mm Sandwich Valve c/w nuts, washers & gaskets
(Max 16bar application)
Valve Plate (Sandwich)
Sandwich Valve MKIII Thru Bore c/w studs, nuts & gaskets
Valve Plate to Suit MKIII Thru Bore Sandwich Valve
Lever
645-000177
379-000071
645-000242
603-000003
MkII DN80 Sandwich Valve
New...
MkIII Sandwich Valve with
80mm Clear Bore
T:
01623 422982
F:
01623 661022
E:
[email protected]
W:
www.hyram.com
70
DSV
Hy-Ram Double Spade Valve (DSV)
The Hy-Ram DSV totally revolutionises the method for making Branch
Connections to existing Water Mains. For the first time ever - new works can be
connected, pressure tested and 100% chlorinated by alleviating the need to
‘break-down’ in order to remove the spade or temporary fittings.
Traditionally the new main is sterilised and then once again exposed to the
environment to remove the spade and temporary fittings to allow ‘piping up’ the
supply line to the distribution line.
Designed as a ‘one-use only’ installation, the utilisation of the DSV mitigates any
risk of contamination and provides a safe, efficient and easy method of making
a branch connection. Whereas traditional methods require two lengthy separate
visits to site to carry out pipe fitting operations - the DSV only requires the initial
setting up and then the secondary visit just involves removing the blades and
blanking off…the cost savings are significant!
DSV
The Benefits
o Double spade design to ensure separation between supply and distribution lines
o Alleviates the requirement to ‘break down’ mitigating the risk of chemical and
bacteriological contamination
o ‘One Hit’ new mains connector requiring only a single visit to site to carry out
pipe fitting operations
o No more ‘Hydrant to Hydrant’ or other temporary works required
o Built in flushing, chlorination and pressure testing facilities
o By-pass arrangement facilitates controlled filling of distribution line and
potential for future DMA flow rate monitoring to check leakage
Product code
Model Showing Blades
withdrawn and By-Pass Fitted
Description
379-000051 DSV80
379-000052 DSV100
379-000053 DSV150
Application
Flanges
80mm Dia. Bore. 3” Branch connections
PN16
PN16
PN16
Blade Kit
For use with DSV80, DSV100 and DSV150. Standard Blade Kit supplied with:
Blade Kit
Product code
Description
251-000002
251-000003
251-000004
DSV80 – Blade Kit
DSV100 - Blade Kit
DSV150 – Blade Kit
Locking Guard Kit
For locking the DSV Blade Kit in place ensuring security of supply.
Locking Guard Kit
Product code
Description
045-000133
045-000134
045-000135
DSV80 – Locking Guard Kit
By-Pass Kits
Hy-Ram make bespoke By-Pass Kits, supplied in strong steel carry cases to suit
individual customer requirements. The Kits normally consist of four easy to
assembly sections joined via quick release couplings. The construction is 2” NB
and typical contains a non-return valve, flow meter, ball valves, pressure test and
chlorination connections etc.
By-Pass Kit Type 2
71
Pi p e
Fi t t i n gs
& Va lves
Service Saddles
Hy-Ram Shut-Off Saddle…
The Hy-Ram Drilling Saddle is operated with a hand-held Valve Plate and is used where the
requirement is for an easily installed, quickly executed underpressure connection. Used in conjunction
with the Hy-Ram J range of Drilling Machines for a variety of underpressure applications.
The bore accepts up to a 38mm diameter Holesaw Cutter to pass through.
The Saddle is purchased with the correct Pipe Strap to suit the OD of the pipe (please refer to the table).
Product code
Description
080-000224
645-000236
Shut Off Saddle Body - 2” BSP Outlet
Valve Plate (Hy-Ram Service Saddle)
Hy-Ram Service Saddle…
The Hy-Ram Service Saddle has an integral rotating Valve Plate operated by the ‘open/close’ Spindle. The
Saddle is used where the requirement is for an easily installed, quickly executed underpressure connection.
The Saddles are used in conjunction with the Hy-Ram Junior range of drilling machines on metallic pipes
3” – 12” Nominal bore…however larger diameters can be accommodated on request.
The bore accepts up to a 32mm diameter Holesaw Cutter to pass through. The Saddle should be purchased
with the correct Pipe Strap to suit the outside diameter of the pipe (please refer to the table).
Product code
Description
080-000237
ServiceSaddle Body - 1 1/2” BSP Outlet
The Pipe Strap…
The Pipe Strap is common for both the Shut-Off Saddle and Service Saddle. Pipe Straps are supplied
together with the necessary Seal (located between Saddle Body and Pipe).
Product code
Description
080-000238
080-000239
080-000240
080-000241
080-000257
080-000242
080-000258
080-000243
080-000244
3" NB (93-103mm) Saddle Strap
7” NB (193-208mm) Saddle Strap
9” NB (244-262mm) Saddle Strap
Quadrina
Flow Probe Nipple Assemblies (Quadrina)
A range of nipples and plugs inserted directly into the main with the Hy-Ram Universal Drilling Machine
or used in conjunction with a Drilling Saddle and the Hy-Ram Junior range of Drilling Machines.
Gate Valve
Nipple
Headworks
Plug
Ferrule Key
T:
01623 422982
F:
Product code
Description
656-000017
300-000053
363-000003
656-000087
270-000007
656-000013
300-000047
363-000004
656-000086
270-000008
656-000080
300-000126
363-000019
656-000081
656-000091
270-000008
1" Quadrina Plug
1" Quadrina Nipple
1" Quadrina Gate Valve
1" Quadrina Headworks Cap
½"-1" Pass Ferrule Key
2" Quadrina Plug
2" Quadrina Nipple
2" Quadrina Gate Valve
2" Quadrina Headworks Cap
1½"-2" Pass Ferrule Key
2" Full-bore MKII (2½") Quadrina Plug
2" Full-bore MKII (2½") Quadrina Nipple
2" Full-bore (2½") Quadrina Gate Valve
2" MKII Full Bore Quadrina Headworks Cap
1" BSP Plug
1½"-2" Pass Ferrule Key
01623 661022
E:
[email protected]
W:
www.hyram.com
72
Flange
Adapters /
Couplings
Hy-Ram an authorised dealer for the GF WAGA product range. This
includes MULTI/JOINT® large tolerance fittings with end-load resistance,
MULTI/JOINT XL® fittings, MULTI/CLAMP, Plast/Joint® and so on.
George Fischer - WAGA
MULTI/JOINT® 3000 Plus (DN50 – DN400) Series
The MULTI/JOINT® 3000 Plus Series… Wide Range Couplings, Reducers, Flange
adaptors, Spigots and End caps…with restraint - Uni/Fiksers. Designed to cover
the pipe range 46-433mm diameter.
MULTI/JOINT XL Series
Overcoming any pipe connection problem in water and gas systems. Reducing
stocks and increasing the quality of the connection and the reliability of your
system.
MULTI/JOINT® XL Series for pipe sizes from DN300 up to and including DN600.
PLAST/JOINT Series
With Plast/Joint® we offer an easy to install, high quality, restraint, mechanical
connection for jointing various plastic pipes.
The PLAST/JOINT® is an alternative to electrofusion or butt fusion when welding
is not possible due to site conditions or wet areas.
Electrofusion
Fittings
Hy-Ram is an authorised distributor for the complete range of GF ELGEF Plus
Electrofusion fittings.
The range includes couplers, reducers, bends, fittings, top tees and so on. The Fields of
application are water & gas distribution, industrial pressure applications, transport and
distribution lines.
GF Electrofusion Fittings
ELGEF Plus Electrofusion Couplers
Wide range of Couplers available from 20mm to 630mm diameter PE100 SDR11
suitable for 16 bar Water, 10 bar Gas. Equipped with 4mm diameter pins and
limited path fusion indicators.
ELGEF Plus Saddles
ELGEF Plus Modular Saddles comprise a complete product package – tapping
saddles, pressure tapping valves, stop-off saddles, repair saddles and spigot
saddles.
ELGEF Plus Electrofusion Fittings
The electrofusion fitting programme is unique for two reasons. Firstly, due to
the complete range of elbows, tees, reducers and end caps extending from
d20 to d250 mm. Secondly, because of the unlimited possibilities offered when
combining such fittings in the sizes d20 to d63 mm with modular transition
adapters.
ELGEF Plus Branch Fitting
The ELGEF Plus branch fitting offers a user friendly solution for new installations
or network extensions.
ELGEF Plus Transition Fittings
The unique ELGEF Plus modular range of transition fittings permits wide product
utilisation but is, nevertheless, limited to just a few component parts: transition
couplers, 45° and 90° transition elbows, transition tees and transition reducers.
73
Pi p e
Fi t t i n gs
& Va lves
Hy-Ram is an official distributor and stockist for Stainless Steel Repair Clamps and
Fittings ranges.
Branded under our own name, the stainless steel repair clamps, drilling saddles
and underpressure tees are suitable for a wide variety of repair and live connection
applications. Contact our Sales Office for more information…
Stainless Steel
Fittings
Hy-Ram Stainless Steel T & TS Clamp
Hy-Ram Stainless Steel T & TS Clamp
T Clamp Range & Dimensions:
The T Clamp is made up of two parts and has a range of 20 mm.
For larger diameters (from DIN 500), the T Clamp is made up of three parts and
has a range of 30 mm. (Larger ranges are available on request)
The length of the clamp depends on the size of the flange and the pipe
diameter, but is a minimum of 500 mm.
TS Clamp Range & Dimensions:
The TS Clamp made up of two parts and is made to measure (i.e. no range). The
TS Clamp is extra heavy duty having a casing made from 6 mm thick stainless
steel with the fixing supports and bolts also made of extra heavy materials.
Threaded Outlet Clamps
Hy-Ram Stainless Steel Branch Clamp
The Hy-Ram Stainless Steel Branch Clamp can be supplied with various tapped
outlets.
The standard internal screw threads are ½” - 3” but alternative threads are
available on request. The Branch Clamp can also be supplied with external screw
thread or a combination of internal and external screw threads.
Other dimensions are available on request.
Repair Clamps
HY-RAM Repair Clamps, Underpressure Tees & Fittings
Branded Hy-Ram, the repair clamps and fittings are flexible; consisting of one or
more stainless steel clamp sections covered with a rubber gasket. They are used
for a quick, easy and permanent repair or connection to broken, corroded or
damaged water and gas pipes. They can be installed on Ductile Iron, Grey Cast
Iron, Steel, Asbestos Cement and Plastic pipes with working pressures up to 30
bar.
Main features:
o Manufactured in Europe to exacting standards
o Short delivery times, even on special orders (any size range catered for) & rush
orders for specials often available within 48 hrs
o Manufactured in quality Stainless Steel grade 304 (grade 316 also available)
o No special tools or skills required for installation. Less crew, equipment and
excavation is required. Repair can be made by one man!
o Stocked as standard with WRAS approved EPDM rubber seals but also available
on request with Nitrile NDR rubber waffle seals for gas applications
Hy-Ram Stainless Steel Q/QS & Snap Clamp
Applications of the Q and Snap clamps
The Hy-Ram Q and Snap clamps are suited for sealing small leaks and corrosion
holes on smaller diameters.
Applications of the QS clamps
As the Q clamp with the additional advantage that it forms a complete 360˚ seal
around the pipe.
T:
01623 422982
F:
01623 661022
E:
[email protected]
W:
www.hyram.com
74
Hire
Why consider hiring?
Project costs have to be minimised, and expenditure on capital
equipment cannot always be justified. Responsibility for maintenance
costs coupled with issues relating to testing, recalibration and
certification can be a millstone.
Hiring is often the smart solution…
Hy-Ram has an extensive ‘specialist’ Hire fleet for ‘pipelining’ applications in the Gas, Water, Sewerage,
Land fill and other associated industries.
With over 25 years experience in the hire business we have built up invaluable knowledge about the
industry, the tools, the time demands and the site conditions and requirements. We can offer the right
advice, the right equipment and a back-up service second to none.
Our depot network ensures localised stock-holding of equipment and a team of regionalised mobile
fitters to look after all aspects of the hire including prompt delivery/collection, training and breakdown
support. Help is always close at hand when you need it!
Over the years we have listened to the requirements of our customers and as a result we have invested
in a range of specialist tools and equipment for a multitude of site applications.
Call our Hire Desk with your requirements…competitive short and long term hire rates are available on
our complete range.
75
H ire
Hire
Equipment
Hy-Ram has and extensive range of equipment available for hire from our four depot
network. Service levels are second to none for a wide variety of piping operations.
Call our hire desk with your requirements.
Butt Fusion
Fully Automatic, Semi-Automatic and Manual Control.
BFM180, BFM250, BFM315, BFM400, BFM500, BFM630,
TracStar™T500, TracStar™T900
Generators, Tents, Pipe Rollers, , McElroy PolyHorse™, Debeaders
Electrofusion
Manual, Auto Recognition and Bar Code Control.
Generators, Tents, Manual and Mechanical Scrapers, Re-Rounding
Clamps, Alignment Clamps, Positioning Kits
Squeeze Off
Mechanical, Hydraulic and Controlled Release Units
SOU63, SOU125, SOU180, SOU200, SOU250, SOU400, SOU500,
SOU-Controlled Release
Pipe Cutting
Plastic Pipe: Guillotine-125, Guillotine-225, Guillotine-315, Hy-Ram
PE Power Saw
Metallic Pipe: Ridgid246, Wheeler-Rex Crackers, Hinged Cutters,
Keel Cutter, Fein Reciprocating Saw, UPC Reed Cutter
Underpressure Drilling
No.1 Drilling machine, Universal Drilling machine, WASK Teeset,
Compact 4 Branch Drill, Compact 6 Branch Drill, LR67 Hi-Flow
Drilling Machine, PEART150
Flow Stopping
WASK Gas Bagging Off Kit, WASK Bypass
Pipe Handling
Coil Trailers, Pipe Buggy’s, Pipe Rollers, McElroy PolyHorse™
Trenchless
Moles (45 – 180mm), Towing Heads (50 – 450mm), Pipe Pushing
Machines (63 - 400mm), Pipe Breakers 2 - 8”
HIRE
General Equipment
Clegg Testers, Gas Monitors, Test Pumps, Submersible Pumps,
Cable Detectors, Cobra Rods and Reels, Pip Expanders
T:
01623 422982
F:
01623 661022
E:
[email protected]
W:
www.hyram.com
76
Repair, Service
& Calibration
Equipment breakdown can result in thousands of pounds
worth of equipment standing idle, normally due to incorrect
maintenance.
In addition, poorly maintained or tested equipment can have critical Health and Safety
implications…potentially costing not only financially but also in personal harm.
Due to the dangers associated with our industry, Hy-Ram believe that a professional
service is fundamental…we understand it is better to prevent such losses.
77
Test
Maintain
Repair
Calibration
Hy-Ram Engineering Co. Ltd. provide a specialist
quality repair service for a range of Water and Gas
and other associated industries equipment.
We have repaired such equipment for over 30 years…
our team of experienced engineers, coupled with our
production team adhere to strict process and test
procedures in accordance with our Lloyds approved ISO
EN 9001 : 2008 Quality System.
Service
o Qualified engineers
o Certified repairs
o BS EN ISO9001: 2008 LRQA approved quality system
o Specially designed, semi automated test rigs for pressure testing
o Computerised Plant Management - ‘flagging’ system to automatically
recall customers equipment due for maintenance and calibration
o Availability of hire/loan equipment whilst we repair your equipment
o Excellent coverage via ‘localised’ repair depots and sales reps/route vans
to service each area efficiently
Hy-Ram repair service includes…
Repair
Collected
&
o Butt Fusion machines
Plant
Management
System
’Reminder Flag’
o Electrofusion controllers
Repair
Logged
o Generators
o Squeeze Off Units
o ‘Approved’ for WASK Flow stopping equipment
o Underpressure Drilling Machines
Update Plant
Management
System
Repair
Despatch
o Pipe Cutting equipment
Route Card
Created & Issued
o Electronic equipment
o Moles
o Compaction equipment
Repair
Completed
Tested &
Certified
T:
Repair Given
‘Go Ahead’ or
Return to
Client
01623 422982
F:
Repair Quoted
/Liase with
Client on Cost
01623 661022
Contact our Sales Office for advice with your repair and
calibration requirements…
E:
[email protected]
W:
www.hyram.com
R EPAI R , SER V IC E
Our quality, service and safety record are first class. All
work is independently inspected, pressure tested and test
certificates are issued where required.
Bespoke test rigs have been developed for critical item
testing.
C AL IB R AT I ON
Hy-Ram offer…
This systematic approach helps maintain an audit trail that
ensures that you are kept informed of progress.
Repairs can be collected and delivered anywhere in the
UK and Southern Ireland, we have excellent coverage
via ‘localised’ repair depots and sales reps/route vans to
service each area efficiently. No work is commenced until
formal approval of the quotation is received.
78
E N G I N E E R I N G
E X C E L L E N C E
Bridge
Street
Brook St
et
Stre
A56
BOLTON
M66
d St
n
Portla
BURY
r
Taylo
Walmersley Road
Hud
car L
ane
A56
Bell Lane
M66
Was
h
A58
Rochdale Road
ROCHDALE
B6222
Lane
M66
(J2)
Rochdale Road
A58
River Walk Rd
Jeffreys Rd
H Y - R A M E N G I N E E R I N G C O. LT D
HEAD OFFICE
SOUTH EAST DEPOT
SCOTLAND DEPOT
NORTH WEST DEPOT
Pelham Street
Mansfield
Nottinghamshire
NG18 2EY
Unit 2 Riverwalk
Business Park
Riverwalk Road
Enfield
EN3 7QN
18 Napier Square
Houstoun Road
Trading Estate
Livingston
West Lothian EH54 5DG
Unit 9
Portland Industrial Estate
Portland Street
Bury
Lancashire BL9 6EY
Tel: 01623 422982
Fax: 01623 661022
Tel: 0208 8058010
Fax: 0208 8056010
Tel: 01506 440233
Fax: 01506 440266
Tel: 0161 7641721
Fax: 0161 7620577
E-mail:
[email protected]
E-mail:
[email protected]
E-mail:
[email protected]
E-mail:
[email protected]
w w w . h y r a m . c o m

innovation hire service - Hy

Transcription

Similar documents

Data Sheet - Carlton

Fernco Flexible Coupling Installation - Fernco

Hymax Couplings 1.5

Chart L4: Details (sidewalks, stormwater management)

HEA TER TEMPLA TE PROP END

VIDEO SCANNER LASER FOR TV INSPECTION AND

ES-225 for Sewerage Assets™ A4

Read it here - fb

lfucg follows kytc lead and approves ads and hancor hdpe pipe for

Fernco Flexible Coupling Installation - Fernco