Gear Pumps / Motors

Transcription

Gear Pumps / Motors

Gear Pumps / Motors
Series PGP / PGM
Fixed Displacement Pumps,
Cast-Iron and Aluminium Designs
parker.com/pmde
Catalogue HY30-3300/UK
Table of contents
Heavy-duty Pumps and Motors
Series PGP, PGM
ContentsPage
Series 500 Aluminium
PGP, PGM 500Characteristics............................................................................ 5
PGP 502 Ordering code..........................................................................6-7
PGP 505 Ordering code..........................................................................8-9
PGP, PGM 511 Ordering code......................................................................10-11
PGP 517 Ordering code......................................................................12-13
PGP 502 Performance data..................................................................... 14
PGP, PGM 511 Performance data..................................................................... 16
PGP 502 Technical Data / Dimensions...............................................18-19
Mounting flange options........................................................... 20
Port options.............................................................................. 21
Drive shaft options.................................................................... 22
PGP 505
Technical Data / Dimensions...............................................23-24
Port options.............................................................................. 26
PGP, PGM 511
Mounting flange options......................................................31-34
Outboard Berings..................................................................... 35
Port options.........................................................................36-37
Drive shaft options...............................................................38-40
PGP 517
Port options.............................................................................. 44
Drive shaft options...............................................................46-48
PGP 511
Operating Conditions................................................................ 49
PGP 517
Operating Conditions................................................................ 50
2
Parker Hannifin
Pump and Motor Division
Chemnitz, Germany
Table of contents
Series PGP, PGM
ContentsPage
Series 600 Cast-Iron
PGP, PGM 600
Characteristics..................................................................................................51
PGP, PGM 620
Ordering code............................................................................................. 52-53
PGP, PGM 640
Ordering Code............................................................................................ 54-55
PGP, PGM 620
Performance data..............................................................................................56
PGP 625
PGP, PGM 640
PGP, PGM 620
Technical Data / Dimensions.............................................................................59
PGP, 625
PGP, PGM 620
PGP 625
PGP, PGM 620/PGP 625
Mounting flange options.............................................................................. 63-64
Port options................................................................................................. 65-66
Drive shaft options...................................................................................... 67-68
PGP, PGM 640
Technical Data / Dimensions....................................................................... 69-71
PGP 640/625Dimensions.......................................................................................................72
PGP, PGM 640
Mounting flange options.............................................................................. 73-74
Port options................................................................................................. 75-76
Drive shaft options...................................................................................... 77-78
PGP, PGM 500/600
Shaft Loads / Fluids..........................................................................................78
List of available pump combinations.................................................................79
Valve options
PGP 500/600
PGP511/517/620/625//640
PGM511/620/640
PGP, PGM 500/600
Pressure relief valve / adjustable internal vent..................................................80
Valve options / Priority Flow Divider / Ordering code.................................. 81-82
Side Mounted Priority Flow Divider (Load Sense or Fixed Flow)......................83
Load Sensing Priority Valve..............................................................................84
Single Pressure Relief Valve.............................................................................86
Single Pressure Relief Valve with Anti-Cavitation.............................................87
Cross Port Pressure Relief Valves....................................................................88
Cross Port Pressure Relief Valves with Anti-Cavitation....................................89
Cross Port Pressure Relief Valves with Anti-Cavitation + Check Valves...........90
Solenoid Proportional Pressure Relief Valve....................................................91
Speed Sensor...................................................................................................92
Standard Seal Kits for pumps/motors 500 + 600..............................................93
Ordering examples...................................................................................... 94-95
3
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM
WARNING – USER RESPONSIBILITY
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS
CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide
product or system options for further investigation by users having technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components
and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The
user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning
the product in the current product catalogue and in any other materials provided from Parker or its subsidiaries or authorized
distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or
specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and
sufficient for all applications and reasonably foreseeable uses of the components or systems.
Offer of Sale
Please contact your Parker representation for a detailed ”Offer of Sale”.
4
Parker Hannifin
Chemnitz, Germany
Characteristics
Heavy-duty aluminium Pumps and Motors
Series PGP, PGM 500
PGP 500 pumps offer superior performance, high efficiency
and low noise operation at high operating pressures. They
are produced in four frame sizes (PGP 502, PGP 505,
PGP 511, PGP 517) with displacements ranging from
0.8 to 70 cm³/rev. A wide variety of standard options is
available to meet specific application requirements.
Characteristics
• High efficiency
Pressure balanced bearing blocks assure maximum
efficiency under all operating conditions.
• Up to 280 bar continuous operation
High strength materials and large journal diameters provide low bearing loads for high pressure
operation.
• Application flexibility
International mounts and connections, integrated
valve capabilities and common inlet multiple pump
configurations provide unmatched design and application versatility.
• Low noise
PGP 502 - 9 tooth gear profile, PGP 505 and
517 - 13 tooth gear profile, PGP 511 - 12 tooth
gear profile and optimized flow metering provide
reduced pressure pulsation and exceptionally quiet
operation.
• Large range of integrated valves
Characteristics
Fluid viscosity
Range of operating viscosity
8 to 1000 mm²/s (511 & 517)
20 to 1000 mm²/s (502 & 505)
Max. permissible operating pressure
dependent on viscosity.
Pump type
Heavy-duty, aluminium, external gear.
Mounting
SAE, rectangular, thru-bolt standard
specials on request.
Ports
SAE and metric split flanges and others
Shaft style
SAE splined, keyed, tapered, cylindrical
tang drive, specials on request
Speed
500 - 5000 rpm, see Technical Data
Theor. displacement
See Technical Data
Drive
Drive direct with flexible coupling is
recommended.
Range of ambient
temperature
-40 °C to +70 °C
Axial / Radial load
Units subject to axial or radial loads must
be specified with an outboard bearing.
Filtration
According to ISO 4406 Cl. 19/17/13
Inlet pressure
Operating range 0.8 to 2 bar abs.
Min. inlet pressure 0.5 bar abs. Short time
without load. Consultation is recommended.
Direction of rotation
(looking at the drive
shaft)
Clockwise, counter-clockwise or double.
Attention! Drive pump only in
indicated direction of rotation.
Outlet pressure
See Technical Data
Pressure rising rate
Max. 3000 bar/s
Multiple pump
assemblies
Flow velocity
See Nomograph for Pipe Velocity
Hydraulic fluids
Hydraulic oil HLP, DIN 51524-2
Fluid temperature
Range of operating temperature
-15 to +80 °C.
dependent on fluid temperature.
Temperature for cold start -20 to -15 °C
at speed ≤ 1500 rpm.
Max. permissible operating pressure dependent on fluid temperature.
• Available in two or three section
the limitations shown in the shaft loading
rating table in this catalogue.
• Max. load is determined by adding
the torque values for each pumping
section that will be simultaneously
loaded.
Separate or common
inlet capability
Separate inlet configuration:
• Each gear housing has individual inlet
and outlet ports.
Common inlet configuration:
• Two gear sets share a common inlet.
Viscosity range for cold start
1000 to 2000 mm²/s at
operating pressure p≤10 bar and
speed n ≤1500 rpm.
5
Parker Hannifin
Chemnitz, Germany
Series PGP 502
Ordering code
PG
502
Gear Type
Design
Code
P
Type
Pump
Code
Unit
Pump
Single unit
Multiple
unit
A
B
Unit
Displace- Rotation Shaft
ment
Flange
Side
Shaft
Side
Rear
Rear
Seal Suction Pressure Suction Pressure
Port
Port
Port 1) Port 1)
Displacement
Code
ccm
0008
0.8
0012
1.2
0016
1.6
0021
2.1
0025
2.5
0033
3.3
0036
3.6
0043
4.3
0048
4.8
0058
5.8
0062
6.2
0079
7.9
Code
C
A
Rotation
Clockwise
Counter clockwise
Code
H1
Shaft
Ø10, 3.0 Key, no thread, 36L,
parallel
Ø9.35, 8.8L, 2.4 Key, M6,
taper 1:8
5x6.5 long shaft w/o coupling
tang drive
P2
V1
Not all variances of ordering codes can be offered. Please check available part numbers first.
For not yet implemented part numbers or special requests please contact Parker Hannifin.
6
1)
Only coded
for the last
section.
Parker Hannifin
Chemnitz, Germany
Series PGP 502
Ordering code
3)
502
Section Connection
Unit
Displacement
Shaft
Seal
Side Side Pres- Rear Rear PresSuction sure Port Suction sure Port 1)
Port
Port 1)
Code
S
C
Section Connection
Separate inlets
Common inlets
Code
B1
D22)
D32)*
E1
E2
E3*
G12)
G32)*
J1*
Port Options
No ports
9/16 - 18 UNF thread
3/4 - 16 UNF thread
1/4 - 19 BSP thread
3/8 - 19 BSP thread
1/2 - 14 BSP thread
M14x1.5 thread
M18x1.5 thread
8 mm - Ø26 mm - M5
square flange
J2*
10 mm - Ø26 mm - M5
square flange
J3*
8 mm - Ø30 mm - M6
square flange
J4*
12 mm - Ø30 mm - M6
square flange
2) Non standard, on request only
*) Not usable for rear ports
Code
X
N
V
Code
D1
H1
P1
Shaft Seal
No seal
NBR
FPM, FKM
Flange
52.2x72.0 - Ø25.4
rectangular
82.5 - Ø50.8 SAE "A-A"
2 bolt flange
40.0x40.0 - Ø32.0 w/ seal
ported, thrubolt flange
3) For further "B" triple unit repeat
displacement,
shaft seal between sections,
side suction port,
side pressure port,
rear suction port,
rear pressure port.
7
Parker Hannifin
Chemnitz, Germany
Series PGP 505
Ordering code
PG
505
Gear Type
Design
Code
P
Code
A
B
C
Unit
ment
Flange
Side
Shaft
Side
Rear
Rear
Port
Port
Port 1) Port 1)
Type
Pump
Unit
Pump
Single unit
Multiple unit
—
Displacement
Code
ccm
0030
3.0
0040
4.0
0050
5.0
0060
6.0
0070
7.0
0080
8.0
0100
10.0
0120
12.0
Code
C
A
Rotation
Clockwise
Counter clockwise
Code
A1
J1
K1
Q2
Shaft
9T, 16/32DP, 32L, SAE "A"
spline
Ø12.7, 3.2Key, no thread, 38L,
parallel
Ø15.88, 4.0Key, no thread,
32L, SAE "A", parallel
Ø14.25, 5.5L, 3.0Key, M10x1,
taper 1:8
Code
D2
H1
H2
Flange
56.0x73.0 - Ø30.0
rectangular
82.5 - Ø50.8 SAE "A-A"
2 bolt flange
106.4 - Ø82.55 SAE "A"
2 bolt flange
8
1)
Only coded
for the last
section.
Parker Hannifin
Chemnitz, Germany
Series PGP 505
Ordering code
3)
505
Section Connection
Unit
Displacement
Shaft
Seal
Port
Port 1)
Code
S
C
Section Connection
Separate inlets
Common inlets
Code
B1
D22)
D32)
D4*
D5*
E2
E3*
E5*
G1
G3*
G4*
J3*
Port Options
No ports
3/4 - 16 UNF thread
7/8 - 14 UNF thread
1 1/16 - 12UN
3/8 - 19 BSP thread
1/2 - 14 BSP thread
3/4 - 16 BSP thread
M14x1.5 thread
M18x1.5 thread
M22x1.5 thread
8 mm - Ø30 mm - M6
square flange
J4*
12 mm - Ø30 mm - M6
square flange
J5*
15 mm - Ø35 mm - M6
square flange
J7*
20 mm - Ø40 mm - M6
square flange
Code
X
N
M
W
Shaft Seal
No seal
NBR
Double NBR
Double FPM
displacement,
side suction port,
side pressure port,
rear suction port,
rear pressure port.
9
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 511
Ordering code
PG
511
Gear Type
Design
Code
P
M
Flange
Side
Shaft
Side
Rear
Rear
Port
Port
Port 1) Port 1)
Unit
A
Pump
Single unit
B
Multiple unit
C
—
D
Single distributor
unit
Displacement*
Code
ccm
0060
6.0
0080
8.0
0100
10.0
0110
11.0
0140
14.0
0160
16.0
0190
19.0
0230
23.0
0270
27.0
0330
33.0
*) Others
ment
Type
Pump
Motor
Code
M
Unit
on request
Motor
Standard Motor
without checks
Standard Motor
with two checks
Standard Motor
w. one anti cavitation check (ACC)
Standard Motor
w. one ACC +
restrictor
—
Code
X
N
V
M
W
Shaft Seal
No seal
NBR
FPM, FKM
Double NBR
Double FPM
Code
A1
Shaft
9T, 16/32DP, 32L, SAE "A"
spline
C1
11T, 16/32DP, 38.2L,
SAE 19-4 spline
K1
32L, SAE "A", parallel
L6
Ø19.05, 4.8 Key, no thread,
32L, SAE 19-1, parallel
S1
Ø17.0, 7.7L, 3.0 Key,
M12x1.5, taper 1:5
S2
Ø16.65, 12.0L, 3.2 Key,
M12x1.5, taper 1:8
V5
8x6.5 short shaft,
tang drive
S8*
Ø20, 9.4L, 4.0 Key, M14x1.5,
taper 1:5
F5
B8x32x36 DIN ISO 14
spline (similar to DIN 5462)
*) To be used with outboard bearing only
Code
C
A
B
Rotation
Clockwise
Counter clockwise
bi-directional
10
1)
Only coded
for the last
section.
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 511
Ordering code
4)
511
Motor
Drain
Option3)
Drain Section ConPosinection
tion 3)
Unit
Displacement
Shaft
Seal
Port
Port 2)
Code
S
C
Code
2
3
4
5
6
Code
Motor Drain Option
B1
no drain
7/16-20 UNF thread
A2)
C
9/16-18 UNF thread
G
1/4 BSP thread
M10x1 metric thread
N2)
M12x1.5 metric thread
P2)
Code
D3
Flange
71.4x96.0 - Ø36.47
rectangular
D4
72.0x100.0 - Ø80
rectangular
H2
106.4 - Ø82.55 SAE "A"
2 bolt flange
H3
146.1 - Ø101.6 SAE "B"
2 bolt flange
60.0x60.0 - Ø52.0 w/o seal ,O'
Q12)
thrubolt flange
Q2
60.0x60.0 - Ø50.0 w. seal ,O'
'thrubolt flange
60.0x60.0 - Ø52.0 w/o seal ,O'
Q32)
thrubolt flange
Q4
60.0x60.0 - Ø50.0 w. seal
,O',thrubolt flange
F4
72.0x100.0 - Ø80.0 rect., w.
OBB and cont. drive shaft
C3
80x80 - Ø80.0
4 bolt flange
3)
Code
B1
D22)
D32)
D42)
D52)
D62)*
D72)*
E2
E3
E4*
E5*
E6*
E7*
G12)
G32)
G42)
G52)*
G72)*
J32)*
J42)*
J5*
J62)*
J7*
J8*
J9*
Section Connection
Separate inlets
Common inlets
Drain Position
Drain on bottom
Drain on top
Rear drain
Drain right view on drive shaft
Drain left view on drive shaft
Port Options
Code
Port Options
No ports
L1*
13 mm-Ø30 mm-M6 diamond
L2*
3/4 - 16 UNF thread
1/2"-5/16-18UNC SAE
N12)*
Split Flange
7/8 - 14 UNF thread
3/4"-3/8-16UNC SAE
N22)*
1 1/16 - 12 UN thread
Split Flange
1 5/16 - 12 UN thread
1"-3/8-16UNC SAE
N32)*
1 5/8 - 12 UN thread
Split Flange
3/8 - 19 BSP thread
1 1/4"-7/16-14UNC SAE
N42)*
1/2 - 12 BSP thread
Split Flange
5/8 - 14 BSP thread
P1*
12.7 mm - M8
3/4 - 14 BSP thread
1/2" Metric Split Flange
1 - 11 BSP thread
P2*
19.0 mm - M10
1 1/4 - 11 BSP thread
M14x1.5 thread
P3*
25.4 mm - M10
M18x1.5 thread
1" Metric Split Flange
M22x1.5 thread
P4*
31.8 mm - M10
M26x1.5 thread
1 1/4" Metric Split Flange
M30x1.5 thread
2)Non standard, on request only
8 mm - Ø30 mm - M6 square *)Not usable for rear ports
12 mm - Ø30 mm - M6 square
Only for motors
4)
For further "B" triple unit repeat
displacement,
side suction port,
side pressure port,
rear suction port,
rear pressure port.
11
Parker Hannifin
Chemnitz, Germany
Series PGP 517
Ordering code
PG
Gear Type
Design
Code
P
Code
A
B
M
517
Unit
ment
Flange
Side
Shaft
Side
Rear
Rear
Port
Port
Port 1) Port 1)
Type
Pump
Unit
Pump
Single unit
Multiple unit
Single distributor
unit
Displacement*
Code
ccm
0160
16
0190
19
0230
23
0280
28
0330
33
0380
38
0440
44
0520
52
0700
70
*) Others
on request
Code
D1
E1
Code
C
A
M1
Rotation
Clockwise
Counter clockwise
M2
T1
Shaft
13T, 16/32DP, 41.2L,
SAE "B" spline
15T, 16/32DP, 46L,
SAE "B-B" spline
41.2L, SAE "B", parallel
Ø25.4, 6.3Key, no thread, 46L,
SAE "B-B", parallel
Ø21.59, 11.2L, 4.0 Key,
M14x1.5, taper 1:8
12
1)
Only coded
for the last
section.
Parker Hannifin
Chemnitz, Germany
Series PGP 517
Ordering code
3)
517
Section Connection
Code
S
C
Code
X
N
V
M
W
Code
D7
H3
K6
Unit
Displacement
Shaft
Seal
Side
Suction
Port
Side
Rear
Rear
Pressure Suction Pressure
Port
Port 1)
Port 1)
Section Connection
Separate inlets
Common inlets
Shaft Seal
No seal
NBR
FPM, FKM
Double NBR
Double FPM
Flange
98.4x128.2 - Ø50.77
rectangular
146.1 - Ø101.6 SAE "B"
2 bolt flange
146.1 - Ø101.6 SAE "B"
2 bolt flange, aluminium
Code
B1
D32)
D42)
D52)
D62)
D72)*
D8*
E3
E4
E5
E6
E7*
E8*
G42)
G52)
G72)
G82)
G92)*
J5*
J7*
J8*
J9*
Port Options
No ports
3/4 - 16 UNF thread
7/8 - 14 UNF thread
1 1/16 - 12 UN thread
1 5/16 - 12 UN thread
1/2 - 12 BSP thread
5/8 - 14 BSP thread
3/4 - 16 BSP thread
1 - 11 BSP thread
M22x1.5 thread
M26x1.5 thread
M30x1.5 thread
M33x2 thread
M42x2 thread
Code
L1*
L2*
L3*
N12)*
Port Options
1/2"-5/16-18UNC
SAE Split Flange
3/4"-3/8-16UNC
N22)*
SAE Split Flange
1"-3/8-16UNC
N32)*
SAE Split Flange
1 1/4"-7/16-14UNC
N42)*
SAE Split Flange
1 1/2"-1/2-13UNC
N52)*
SAE Split Flange
12.7 mm - M8
P12)*
P2*
19.0 mm - M10
P3*
25.4 mm - M10
P4*
31.8 mm - M10
P5*
38.1mm - M12
displacement,
side suction port,
side pressure port,
rear suction port,
rear pressure port.
13
Parker Hannifin
Chemnitz, Germany
Performance data
Series PGP 502
PGP 502 - 0.8 CC
PGP 502 - 1.6 CC
PGP 502 - 3.6 CC
PGP 502 - 7.9 CC
Fluid Temperature = 45± 2°C
Viscosity = 36 mm2/s
Inlet Pressure = 0.9 + 0.1 bar absolute
14
Parker Hannifin
Chemnitz, Germany
Series PGP 505
Performance data
PGP 505 - 3.0CC
PGP 505 - 6.0 CC
16
15
14
Flow [l/min]
Input power [kW]
PGP 505 - 10.0 CC
PGP 505 - 12.0 CC
32
30
Flow n=2800 rev/min
28
13
26
12
24
11
22
10
20
9.0
18
8.0
16
7.0
14
6.0
12
5.0
10
4.0
8.0
3.0
6.0
2.0
4.0
1.0
2.0
0
0
I. Power n=2800 rev/min
Flow n=1500 rev/min
Flow n=500 rev/min
0
50
100
150
200
250
300
Pressure [bar]
15
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 511
Performance data
14
30
28
13
26
12
24
Flow n=4000 rev/min
20
19
18
17
Flow [l/min]
15
PGP 511 - 10.0 CC
32
Input power [kW]
16
Flow [l/min]
Input power [kW]
PGP/PGM 511 - 6.0 CC
40
38
34
16
32
15
30
14
28
13
26
11
22
10
20
9.0
18
8.0
16
10
20
7.0
14
9.0
18
6.0
12
5.0
10
4.0
8.0
3.0
6.0
2.0
4.0
1.0
2.0
0
0
Flow n=500 rev/min
0
50
PGP/PGM 511 - 19.0 CC
100
150
200
250
300
Pressure [bar]
Flow n=3600 rev/min
36
12
24
11
22
8.0
16
7.0
14
6.0
12
5.0
10
4.0
8.0
3.0
6.0
2.0
4.0
1.0
2.0
0
0
Flow n=1500 rev/min
Flow n=500 rev/min
0
50
100
150
200
250
300
Pressure [bar]
PGP 511 - 33.0 CC
16
Parker Hannifin
Chemnitz, Germany
Series PGP 517
Performance data
PGP 517- 16.0 CC
PGP 517 -28.0 CC
65
130
60
120
55
110
50
100
45
90
40
80
35
70
30
60
25
50
20
40
15
30
10
20
5,0
10
0
0
55
Flow n=2800 rev/min
120
110
80
75
70
Flow [l/min]
60
120
90
55
110
40
80
50
100
35
70
45
90
40
80
30
60
35
70
25
50
30
60
20
40
25
50
15
30
20
40
15
30
10
20
10
20
5.0
10
5
10
Flow n=1500 rev/min
Flow n=500 rev/min
0
0
0
50
200
250
300
100
150
200
Flow n=2700 rev/min
140
60
45
150
150
130
100
100
160
65
50
50
PGP 517- 52.0 CC
130
Input power [kW]
65
Flow [l/min]
Input power [kW]
PGP 517 - 44.0 CC
0
Flow n=1500 rev/min
Flow n=500 rev/min
0
250
300
Pressure [bar]
0
50
100
150
250 300
200
Pressure [bar]
17
Parker Hannifin
Chemnitz, Germany
Series PGP 502
Technical Data / Dimensions
PGP 502 Pump Specification - Standard Displacements
Pump Displacement
Code
0008
0012
0016
0021
0025
0033
0036
0043
0048
0058
0062
0079
cm³/rev
0.8
1.2
1.6
2.1
2.5
3.3
3.6
4.3
4.8
5.8
6.2
7.9
Max. Continuous Pressure
bar
280
280
280
280
280
280
260
250
230
200
180
160
Minimum Speed
@ Max. outlet press.
rpm
500
500
500
500
500
500
500
500
500
500
500
500
Maximum Speed
@ 0 Inlet & Max. outlet press.
rpm
5000
5000
5000
4500
4500
4000
4000
3500
3000
3000
3000
3000
Pump Input Power
@ Max. Press. and 1500 rpm
kW
0.82
1.1
1.4
1.7
2.0
2.5
2.6
2.6
2.4
2.8
2.9
3.0
Dimension "L"
mm
35.3
36.8
38.3
39.9
41.5
44.5
45.6
48.5
50.0
53.8
55.3
61.6
kg
1.1
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.4
1.4
1.5
1.6
Approximate Weight
1)
1)
Single pump with Flange D1 and Port end cover B1
Single Unit PGP 502
“L”
“F”
“L/2”
19
9.5
70
68 Across body max.
Dimension "L" see table above
Dimension "F" see flanges on page 20
Dimension Shafts see page 22
18
Parker Hannifin
Chemnitz, Germany
Series PGP 502
Dimensions
Single Unit PGP 502 with rear ports
68 Across body max.
“L”
19
70
9.5
“F”
12
12
Dimension "L" see table on page 18
Tandem Unit PGP 502
“L”
“F”
“L/2”
42.5
“L/2”
19
9.5
70
68 Across body max.
“L”
19
Parker Hannifin
Chemnitz, Germany
Series PGP 502
Mounting flange options
PGP 502 Mounting Flange
Code D1
68
52.4
10
Ø19
Ø25.4 f7
72
88
26.2
34
4
Ø7.2
15
Code H1
103
82.5
6.3 -0.2
Ø19
76.5
10+0.5
64
Ø50.8 h8
32
7.5
25.7
60
Code P1
8
40
O-ring
9.25x1.78
40
Ø9.2
9.5
70
10.5
Ø19
Ø32 f8
O-ring
26.64x2.62
Pressure Port
20
23
Ø8.7
20
Parker Hannifin
Chemnitz, Germany
Series PGP 502
Port options
PGP 502 Porting
ØB
G1
T2
T1
G2
Code E British Standard Pipe Parallel (BSPP)
Code G Metric straight thread
90°
ØD
45°
T1
G1
Code J European flange
Code D SAE straight thread
PGP 502
Code
D2
D3
E1
E2
E3
G1
G3
J1
J2
J3
J4
G1
9/16-18 UNF
3/4-16 UNF
1/4-19 BSP
3/8-19 BSP
1/2-14 BSP
M14x1.5
M18x1.5
G2
M5
M5
M6
M6
T1
12.7
14.3
12.0
12.0
14.0
12.0
12.0
ØB
ØD
T2
8.0
10.0
8.0
12.0
26.0
26.0
30.0
30.0
12.0
12.0
12.0
12.0
21
Parker Hannifin
Chemnitz, Germany
Series PGP 502
Drive shaft options
PGP 502 Drive Shaft
Square Key
3x3x22
22
3
-0.009
Ø10
±0.13
11.2
3
Code H1
36
Spring Washer
Code P2
Nut M6 DIN934
M6
Tightening torque
6 ± 2 Nm
1.1
Woodruff Key 2.4x5 Ø13
Ø9.35
Taper 1:8
+1
8.8
10.4
29 +1
Ø10
-0.06
5 -0.09
Code V1
6.5 -0.2
12 -0.4
PGP/PGM 502 - Shaft Load Capacity
Code
Description
Torque Rating
[Nm]
H1
Ø10,3.0 KEY, no thread, 36L
parallel
30
P2
Ø9.95, 8.8L, 2.4 KEY, M6
taper 1:8
30
V1
5x6.5 long shaft w/o coupling
tang drive
20
Displacement [cm3/rev] x Pressure [bar]
Torque [Nm] =
57.2
22
Parker Hannifin
Chemnitz, Germany
Series PGP 505
PGP 505 Specification - Standard Displacements
Pump Displacement
Code
0030
0040
0050
0060
0070
0080
0100
0110
0120
cm³/rev
3.0
4.0
5.0
6.0
7.0
8.0
10.0
11.0
12.0
bar
275
275
275
275
275
275
250
250
220
Minimum Speed
@ Max. outlet pressure
rpm
500
500
500
500
500
500
500
500
500
Maximum Speed
@ 0 Inlet & Max. outlet pressure
rpm
4000
4000
4000
3600
3300
3000
2800
2400
2400
Pump Input Power
@ Max. Pressure and 1500 rpm
kW
2.3
3.0
3.8
4.5
5.3
6.0
6.9
7.6
7.5
Dimension "L"
mm
41.1
43.8
46.5
49.1
51.8
54.5
59.8
62.5
65.2
kg
2.22
2.27
2.32
2.38
2.43
2.48
2.58
2.63
2.68
Approximate Weight1)
1)
Single pump with Flange D3 and Port end cover B1
Single Unit PGP 505
“L”
75 Across body max.
“L/2”
17
13.1
82
“F”
Dimension "F" see flanges on pages 25
Dimension Shafts see pages 27 and 28
23
Parker Hannifin
Chemnitz, Germany
Series PGP 505
Dimensions
75 across body max.
“F”
“L”
13.1
82
27
15.1
15.1
Tandem Unit PGP 505
“L”
“L/2”
“L”
5 “L/2”
19
13.1
“F”
24
Parker Hannifin
Chemnitz, Germany
82
75 Across body max.
Series PGP 505
68
5.5
9.8
56
85
73
Ø30 f8
24.5
30.5
Code D2
15.2
Ø6.5
101.6
Code H1
6.1
9.8
85.9
Ø10.3
Ø50.8 h8
31.8
82.6
15.2
130.2
Code H2
9.8
106.4
101.8
Ø11.1
Ø82.55 -0.06
47.7
6.1
15.2
25
Parker Hannifin
Chemnitz, Germany
Series PGP 505
Port options
PGP 505 Porting
Code J
European flange
Code E
British Standard Pipe
Code G
Metric straight thread
90°
G1
T1
45°
ØD
Code D
SAE straight thread
T1
G1
ØB
T2
G2
PGP 505
Code
Thread
D2
D3
D4
D5
E2
E3
E5
G1
G3
G4
J3
J4
J5
J7
K5
G1
Thread
9/16-18 UNF
3/4-16 UNF
7/8-14 UNF
1 1/16-12 UN
3/8-19 BSP
1/2-14 BSP
3/4-14 BSP
M 14x1.5
M 18x1.5
M 22x1.5
G2
T1
∅B ∅D
Dimensions
S
T2
12.7
14.3
16.7
19.0
12.0
14.0
16.0
12.0
12.0
14.0
M6
M6
M6
M6
1/4UNC 14.2
8.0
12.0
15.0
20.0
30.0
30.0
35.0
40.0
12.0
12.0
12.5
13.0
25.15 13.0
26
Parker Hannifin
Chemnitz, Germany
Series PGP 505
Drive shaft options
PGP 505 Drive Shaft
Woodruff Key
3x5 DIN6888
Nut M10x1
DIN934
11.5
Tightening torque
17 ± 5 Nm
Ø14.25
(5.5)
Ø12
Ø16
M10 x1
1.7
Code Q2
Spring Washer
20.9
Taper 1:8
35
32.2
23.8 Full spline
Ø16
Code A1
Spline SAE “A”
9T - 16/32DP
Flat root side fit
32
27
Parker Hannifin
Chemnitz, Germany
Series PGP 505
Drive shaft options
PGP 505 Drive Shaft
Code J1
35.5
19
Square key
3.2x3.2x19
Ø14.2-0.26
Ø16
Ø12.7-0.03
3.2
3.2
38.1
Code K1
32.2
Square key
4x4x19
19
Ø17.73 -0.26
Ø15.88 -0.03
4
Ø16
3.2
31.8
PGP 505 - Shaft Load Capacity
Code
A1
Description
9T,16/32DP, 32L, SAE“A“
Torque Rating
[Nm]
spline
108
J1
Ø12.7, 3.2 KEY, no thread, 38L
parallel
43
K1
Ø15.88, 4.0 KEY, no thread, 32L, SAE“A“
parallel
85
Ø14.25, 5.5L, 3.0 KEY, M10x1
taper 1:8
68
Q2
Multiple pump connection shaft
Torque [Nm] =
36
57.2
28
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 511
PGP/PGM 511 Specification - Standard Displacements
Pump Displacement
Code
0060
0080
0100
0110
0140
0160
0190
0230
0270
0330
cm³/rev
6.0
8.0
10.0
11.0
14.0
16.0
19.0
23.0
27.0
33.0
bar
250
250
250
250
250
250
250
225
190
155
Minimum Speed
rpm
500
500
500
500
500
500
500
500
500
500
Maximum Speed
rpm
3500
3500
3500
3500
3500
3500
3250
2750
2350
2000
Pump Input Power
kW
4.5
6.0
7.5
8.3
10.5
12.0
14.3
14.7
14.9
17.3
Dimension "L"
mm
50.1
53.3
56.5
58.0
62.8
65.9
70.6
76.9
83.2
92.6
kg
3.40
3.47
3.55
3.57
3.71
3.79
3.91
4.06
4.21
4.45
Approximate Weight 1)
1)
Single pump with Flange Q1 and Port end cover B1
Distributor Unit PGP 511
Drive shaft with
internal spline
Connection for next
section possible
“L”
90 across body max.
“L/2”
21
15.9
“F”
102 max.
Single Unit PGP/PGM 511
Dimension "F" see flanges on pages 31 to 34
Dimension Shafts see pages 38 to 40
29
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 511
Dimensions
Single Unit PGP/PGM 511 with rear ports
90 across body max.
“L”
30
15.8
102 max.
“F”
19.2
19.2
Tandem Unit PGP/PGM 511
“F”
“L/2”
5.8
“L/2”
21
15.9
90 across body max.
“L”
30
Parker Hannifin
Chemnitz, Germany
102 max.
“L”
Series PGP, PGM 511
90 max.
PGP/PGM 511 Mounting Flange
Code D3
5
71.4
-0.03
Ø36.5 -0.08
96
114 max.
32.5
40.5
12.7
18.7
Ø8.5
91 max.
Code D4
12.7
72
34.5
100
119 max.
-0.06
Ø80 -0.11
43.5
7.2
18.7
Ø9
131 max.
12.7
106.4
114 max.
Ø11.2
Ø82.55 -0.05
6
47.6
Code H2
18.7
31
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 511
Code H3
12.7
146
127 max.
Ø14.3
Ø101.6 -0.05
60.3
9.4
176 max.
18.7
86 max.
Code Q1
7.2
60
35.1
18
Ø10.7
15.9
32
Parker Hannifin
Chemnitz, Germany
101.6 max.
60
14.2
Ø35
-0.03
Ø52 -0.08
O-ring
45x2.5
Series PGP, PGM 500
Code Q2
86 max.
7.2
101.6 max.
-0.02
Ø50 -0.06
60
14.2
35.1
60
Ø10.7
15.9
86 max.
18
Ø10.7
15.9
86 max.
7.2
60
60
60
101.6 max.
-0.02
Ø50 -0.06
14.2
35.1
Code Q4
101.6 max.
35.1
Ø35
-0.03
Ø52 -0.08
60
7.2
O-ring
45x2.5
14.2
Code Q3
Ø10.7
15.9
33
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 511
Code F4
92
13
72
100
120
-0.06
Ø80 -0.11
34.5
44.5
36
Code C3
Ø9
108
26.5
80
66
80
120
-0.03
Ø80 -0.06
Code C3
Tell Tale
9 11
Ø13
4 Holes
34
Parker Hannifin
Chemnitz, Germany
108
8
Series PGP, PGM 511
Outboard Berings
Outboard Bearing PGP-PGM 511
Bearing loads for code F4
Units subject to axial or radial loads, for instance drive
with V-belts or gear wheels, must be specified with an
outboard bearing.
The diagrams below show the maximum axial or radial
loads that can be tolerated referred to a bearing life of
LH = 1000 h.
Fr is reduced by 0,7 Fa when axial loading is applied.
Outboard Bearing Code F4
Fr
a
Shaft load for outboard bearings PGP/PGM 511
1400
1200
n = 1000
rev/min
Fa
Fr [ N ]
1000
n = 1500
rev/min
800
600
n =2000
rev/min
400
n = 3000
rev/min
n = 4000
rev/min
200
0
0
10
35
20
30
a [ mm ]
40
50
Parker Hannifin
Chemnitz, Germany
60
Series PGP, PGM 511
Port options
PGP/PGM 511 Porting
Code E
Code G
T1
G1
Code D
SAE straight thread
Code L
4-Bolt flange
PGP/PGM 511
T1
Dimensions
12.7
14.3
16.7
19.0
19.0
19.0
12.0
14.0
16.3
16.0
18.0
20.0
12.0
12.0
14.0
16.0
12.0
Ø
D
D2
D3
D4
D5
D6
D7
E2
E3
E4
E5
E6
E7
G1
G3
G4
G5
G7
G1
Thread
9/16-18 UNF
3/4-16 UNF
7/8-14 UNF
1 1/16-12 UN
1 5/16-12 UN
1 5/8-12 UN
3/8-19 BSP
1/2-14 BSP
5/8-14 BSP
3/4-16 BSP
1-11 BSP
1 1/4-11 BSP
M 14x1.5
M 18x1.5
M 22x1.5
M 26x1.5
M 30x1.5
ØB
G2
T2
Code
36
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 511
Port options
PGP/PGM 511 Porting
C
Code N
SAE Split flange
90°
45°
ØD
W
Code P
SAE Split flange
metric thread
Code J
European flange
ØB
T2
G2
PGP/PGM 511
Code
J3
J4
J5
J6
J7
J8
J9
K1
K2
K3
K4
L1
L2
N1
N2
N3
N4
P1
P2
P3
P4
G2
Thread
M6
M6
M6
M8
M6
M8
M8
5/16-18 UNF
M8
M6
M6
M6
M8
5/16-18 UNC
3/8-16 UNC
3/8-16 UNC
7/16-14 UNC
M8
M10
M10
M10
∅B
∅D
8.0
12.0
15.0
15.0
20.0
18.0
26.0
19.0
19.0
19.0
16.0
13.0
19.0
12.7
19.0
25.4
31.8
12.7
19.0
25.4
31.8
30.0
30.0
35.0
40.0
40.0
55.0
55.0
S
C
Dimensions
W
T2
17.48
22.23
26.19
30.17
17.48
22.23
26.19
30.17
12.0
12.0
12.5
15.0
13.0
15.0
15.0
15.0
15.0
13.0
13.0
13.0
15.0
15.0
14.0
20.6
20.6
15.0
20.6
21.4
20.6
30.48
30.48
32.00
25.15
30.0
40.0
38.10
47.63
52.37
58.72
38.10
47.63
52.37
58.72
37
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 511
Drive shaft options
PGP/PGM 511 Drive Shaft
Ø 11.9
Spline SAE “A”
9T - 16/32 DP
Flat root side fit
Ø 17.5
Code A1
7.6
24.3
32
Ø 19
Spline SAE 19-4
11T-16/32 DP
Flat root side fit
Ø 15
Code C1
7.6
30.1
38.2
31.3
Code K1
Square key
4x4x19
19
55
31.8
17.73 -0.26
Ø15.88 -0.03
4
3.2
B8x32x36 DIN ISO 14
spline (similar to DIN 5462)
27.8
1.6 H13
Code F5
Ø8.1
25
37.1
38
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 511
Drive shaft options
34
Square key
4.8x4.8x22.2
22.2
3.2
21.23 -0.26
Ø19.05 -0.03
4.8
Code L6
31.8
Code S1
Woodruff Key
3x5 DIN 6888
Spring Washer
30
Nut
Taper 1:5
M12x1.5
3
Ø17
1.8
17
Tightening torque
28 ± 5 Nm
(7.7)
37.7
27.7
Woodruff Key
3.2x6.5xØ16
Spring Washer
Nut
Ø17
1.5
15.4
39.7
Ø16.65
(12)
M12x1.5
3.2
Code S2
39
Tightening torque
28 ± 5 Nm
Taper 1:8
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 511
Drive shaft options
Code S8
Spring Washer
Nut
Taper 1:5
M14x1.5
Ø20
Woodruff Key
4x6.5 DIN 6888
Tightening torque
50 ± 10 Nm
45.0
6.6
Code V5
Ø18 -011 TANG
Ø30
7.95±0.03
8
12
Code
A1
C1
F5
K1
L6
S1
S2
S8
V5
Description
9T, 16/32DP, 32L, SAE“A“
11T, 16/32DP, 38.2L, SAE 19-4
B8x32x36 DIN ISO 14 (similar to DIN 5462)
Ø15.88, 4.0 KEY, no thread, 32L, SAE“A“
Ø19.05, 4.8 KEY, no thread, 32L, SAE 19-1
Ø17.0, 7.7L, 3.0 KEY, M12x1.5
Ø16.65, 12.0L, 3.2 KEY, M12x1.5
Ø20, 9.4L, 4.0 KEY, M14x1.5
8x6.5 short shaft
Torque [Nm] =
Torque Rating
[Nm]
spline
spline
spline
parallel
parallel
taper 1:5
taper 1:8
taper 1:5
tang drive
86
166
166
75
145
193
198
110
60
110
57.2
40
Parker Hannifin
Chemnitz, Germany
Series PGP 517
PGP 517 Specification - Standard Displacements
Pump Displacement
Code
0160
0190
0230
0280
0330
0380
0440
0520
0700
cm³/rev
16.0
19.0
23.0
28.0
33.0
38.0
44.0
52.0
70.0
bar
250
250
250
250
250
250
220
200
160
Minimum Speed
rpm
500
500
500
500
500
500
500
500
500
Maximum Speed
rpm
3400
3300
3300
3100
3000
3000
2800
2700
2400
Pump Input Power
kW
11
13.1
15.8
19.3
22.7
26.1
27
28.6
31.2
Dimension "L"
mm
70.3
73.3
77.4
82.4
87.5
92.5
98.6
106.7
124.9
kg
8.00
8.12
8.29
8.50
8.70
8.91
9.16
9.49
10.24
Approximate Weight
1)
1)
Single pump with Flange H3 and Port end cover B1
Single Unit PGP 517
“L”
“F”
“L/2”
26
21.1
130
112 across body max.
41
Parker Hannifin
Chemnitz, Germany
Series PGP 517
Dimensions
“F”
“L”
33
21.1
130
25.9
25.9
Tandem Unit PGP 517
“L”
“L”
“F”
“L/2”
5.8
“L/2”
26
21.1
130
42
Parker Hannifin
Chemnitz, Germany
Series PGP 517
122
98.4
24
Ø50.77 -0.03
128.2
147
52
42.9
5
Code D7
28
Ø11
174.6
9.4
146
Ø14.3
Ø101.6 -0.05
60.3
12.7
146.5
Code H3/K6
28
43
Parker Hannifin
Chemnitz, Germany
Series PGP 517
Port options
PGP 517 Porting
Code E
Code G
Code D
SAE straight thread
G1
T1
T1
G1
PGP 517
Code
D2
D3
D4
D5
D6
D7
D8
E2
E3
E4
E5
E6
E7
E8
G4
G5
G7
G8
G9
G1
T1
Thread
Dimensions
9/16-18 UNF
3/4-16 UNF
7/8-14 UNF
1 1/16-12 UN
1 5/16-12 UN
1 5/8-12 UN
1 7/8-12 UN
3/8-19 BSP
1/2-14 BSP
5/8-14 BSP
3/4-16 BSP
1-11 BSP
1 1/4-11 BSP
1 1/2-11 BSP
M 22x1.5
M 26x1.5
M 30x1.5
M 33x2
M 42x2
12.7
14.3
16.7
19.0
19.0
19.0
19.0
12.0
14.0
16.3
16.0
18.0
20.0
22.0
14.0
16.0
12.0
18.0
20.0
44
Parker Hannifin
Chemnitz, Germany
Series PGP 517
Port options
PGP 517 Porting
Code J
European flange
Code L
4-Bolt flange
ØB
G2
Ø
T2
D
90°
ØB
45°
ØD
T2
G2
Code N
SAE split flange
Code P
SAE split flange metric thread
PGP 517
∅B
∅D
Thread
J5
J7
J8
J9
L1
L2
L3
L4
N1
N2
N3
N4
N5
P1
P2
P3
P4
P5
M6
M6
M8
M8
M6
M8
M10
1/4-20 UNF
5/16-18 UNC
3/8-16 UNC
3/8-16 UNC
7/16-14 UNC
1/2-13 UNC
M8
M10
M10
M10
M12
S
C
W
T2
17.48
22.23
26.19
30.17
35.71
17.48
22.23
26.19
30.17
35.71
12.5
13.0
15.0
15.0
13.0
15.0
18.0
13.0
15.0
14.0
20.6
20.6
20.6
15.0
20.6
21.4
20.6
20.6
G2
Dimensions
15.0
20.0
18.0
26.0
13.0
19.0
27.0
13.0
12.7
19.0
25.4
31.8
38.1
12.7
19.0
25.4
31.8
38.1
35.0
40.0
55.0
55.0
30.0
40.0
51.0
30.0
38.10
47.63
52.37
58.72
69.82
38.10
47.63
52.37
58.72
69.82
T2
G2
C
W
Code
ØB
45
Parker Hannifin
Chemnitz, Germany
Series PGP 517
Drive shaft options
PGP 517 Drive Shaft
Code D1
43.6
Spline SAE “B”
13T - 16/32 DP
Flat root side fit
Ø 27
33.3 Full spline
41.2
Code E1
50.8
38.1 Full spline
Ø 27
Spline SAE “B-B”
15T - 16/32 DP
Flat root side fit
46
46
Parker Hannifin
Chemnitz, Germany
Series PGP 517
Drive shaft options
PGP 517 Drive Shaft
Code M1
44.3
Square key
6.3x6.3x25.4
25.4
23.9
-0.3
25.1
4.8
Ø 22.22 -0.03
1.5
Ø 27
6.3
3
41.2
Code M2
49.1
Square key
6.3x6.3x31.7
31.7
28.2 -0.2
Ø 25.4-0.05
Ø 27
6.3
3
46
47
Parker Hannifin
Chemnitz, Germany
Series PGP 517
Drive shaft options
PGP 517 Drive Shaft
Code T1
Woodruff key
4x7.5 DIN 6888
Spring washer
20.8
Nut
DIN 934 M14x1.5
M14x1.5
Ø 27
1.5
14.5
Ø 21.59
(11.2)
Tightening torque
50 ± 10 Nm
Taper 1:8
46.5
Code
D1
E1
M1
M2
T1
Description
13T,16/32DP, 41.2L, SAE“B“
15T, 16/32DP, 46L, SAE“B-B“
Ø22.2, 6.3 KEY, no thd, 41.2L, SAE“B“
Ø25.4, 6.3 KEY, no thd, 46L, SAE“B-B“
Ø21.59,11.2 L,4.0 KEY, M14x1.5
Torque [Nm] =
Torque Rating
[Nm]
spline
spline
parallel
parallel
taper 1:8
345
530
251
395
250
228
57.2
48
Parker Hannifin
Chemnitz, Germany
Series PGP 511
Operating Conditions
Pressure p [bar]
Pressure depending on speed
250
4.0 TO 16.0 cc
4.0 TO 19.0 cc
23.0 cc
19 cc
200
27.0 cc
31.0 cc
150
33.0 cc
100
500
1000
1500
2000
2500
3000
3500
Speed n [rpm]
Pressure depending on viscosity
250
Pressure p [bar]
4.0 TO 19.0 cc
23.0 cc
200
27.0 cc
31.0 cc
150
100
33.0 cc
8
10 12 15
20
50
100
Viscosity ν
49
[mm2/s
200
500
1000
(cSt)]
Parker Hannifin
Chemnitz, Germany
Series PGP 517
Operating Conditions
Pressure p [bar]
Pressure depending on speed
250
14.0 and 16.0 cc
14.0 to 38.0 cc
19.0 and 23.0 cc
33.0 and 38.0 cc
44.0 cc
52.0 cc
200
25.0 and 28.0 cc
150
100
500
1000
1500
2000
2500
3000
3500
Speed n [rpm]
Pressure p [bar]
Pressure depending on viscosity
250
14.0 to 38.0 cc
44.0 cc
200
52.0 cc
150
100
8
10 12 15
20
50
100
200
500
1000
Viscosity ν [mm2/s (cSt)]
50
Parker Hannifin
Chemnitz, Germany
Characteristics
Heavy-duty cast-iron Pumps and Motors
Series PGP, PGM 600
Over many years Parker Hydraulics has supplied gear
pumps and motors for mobile and industrial markets
worldwide, especially for materials handling, commercial
grass cutting and construction equipment applications.
Many Parker pumps and motors have been developed
and tested for the specific needs of these industries.
Parker’s defined strategy to provide engineered solutions,
coupled with an award winning flexible manufacturing system, has resulted in a wide range of SAE/DIN/European
and other special options being available as standard.
Features
• Patented interlocking body design
• Pressure balanced design for high efficiency
• 12 tooth gears, bronze balance plates
• Tandem, triple and cross-frame pumps available
• Reduced system noise levels compared to earlier
models
• Common inlets available for tandem and triple pumps
• High power through-drive capability
• Continuous operating pressures up to 310 bar
• Wide range of integral valves for power steering,
power brakes, fan drivers and implement hydraulics
• Production run-in available to suite OEM application
conditions and to provide optimized volumetric
efficiencies
• Load sense and solenoid operated unloading valves
Characteristics
Pump type
Heavy-duty, cast iron, external gear.
Mounting
SAE, rectangular, thru-bolt standard
specials on request.
Ports
SAE and metric split flanges and others
Shaft style
SAE splined, keyed, tapered, cylindrical
tang drive, specials on request
Speed
500 - 3500 rpm, see Technical Data
Theor. displacement
See Technical Data
Drive
Drive direct with flexible coupling is
recommended.
Axial / Radial load
Units subject to axial or radial loads must
be specified with an outboard bearing.
Inlet pressure
Operating range 0.8 to 2 bar abs.
Min. inlet pressure 0.5 bar abs. Short time
without load. Consultation is recommended.
Outlet pressure
See Technical Data
Flow velocity
See Nomograph for Pipe Velocity
Hydraulic fluids
Hydraulic oil HLP, DIN 51524-2
Fluid temperature
Range of operating temperature
-15 to +80 °C.
Temperature for cold start -20 to -15 °C
at speed ≤ 1500 rpm.
Fluid viscosity
Range of operating viscosity
8 to 1000 mm²/s.
dependent on viscosity.
Viscosity range for cold start
1000 to 2000 mm²/s at
operating pressure p≤10 bar and
speed n ≤1500 rpm.
51
Range of ambient
temperature
-40 °C to +70 °C
Filtration
According to ISO 4406 Cl. 19/17/13
Direction of rotation
(looking at the drive
shaft)
Clockwise, counter-clockwise or double.
Attention! Drive pump only in
indicated direction of rotation.
Multiple pump
assemblies
• Available in two or three section
configuration.
• Max. shaft load must be conform to
the limitations shown in the shaft loading
rating table in this catalogue.
• Max. load is determined by adding
the torque values for each pumping
section that will be simultaneously
loaded.
Separate or common
inlet capability
Separate inlet configuration:
• Each gear housing has individual inlet
and outlet ports.
Common inlet configuration:
• Two gear sets share a common inlet.
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 620
Ordering code
PG
Gear
Design
Code
P
M
Type
Unit
ment
Flange
Side
Shaft
Side
Rear
Rear
Port
Port
Port 1) Port 1)
Type
Pump
Motor
Design
Pump and Motor
Pump
620
625
Code
Unit
A
Pump
Single unit
B
Multiple unit
C
—
Motor
Standard Motor
without checks
Standard Motor
with two checks
Standard Motor
Code
X
N
V
M
W
Displacement
Code
Design
620
625
ccm
ccm
0160
16
–
0190
19
–
0230
23
–
0260
26
–
0290
29
–
0330
33
–
0360
36
36
0370
37
–
0410
41
41
0440
44
–
0450
–
45
0500
50
50
0520
52
–
Code
C
A
B
Shaft Seal
No seal
NBR
FPM, FKM
Double NBR
Double FPM
Code
D1
Shaft
13T, 16/32DP, 41.2L,
SAE ”B” spline
E1
15T, 16/32DP, 46L,
SAE ”B-B” spline
14T, 12/24 DP, 55.6L,
E44)
SAE ”C” spline
M3
Ø25.4, 6.3 Key, M8, 46L,
SAE "B-B", parallel
T1
Ø21.59, 11.2L, 4.0 Key,
M14x1.5, taper 1:8
T25) Ø25.0, 12L, 5.0 Key, M16x1.5,
taper 1:5
4) ( via drive adaptor)
Rotation
Clockwise
Counter clockwise
bi-directional
52
1)
Only coded
for the last
section.
2)
Only for motors
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 620
Ordering code
3)
Motor
Drain
Option 2)
Drain Section ConPosinection
tion 2)
Unit
Displacement
Shaft
Seal
Side Side Pres- Rear
Rear PresSuction sure Port Suction sure Port 1)
Port
Port 1)
Design
Pump and Motor
Pump
Code
S
C
620
625
Section Connection
Separate inlets
Common inlets
Code
Drain Position
Drain on bottom
26)
Drain on top
36)
4
Rear drain
Code
B1
C
G
Code
A3
A4
D7
H2
H3
L3
Flange
89.8x89.8 - Ø101.6,
SAE "B" 4 bolt square
114.5x114.5 - Ø127,
SAE "C" 4 bolt square
98.4x128.2 - Ø50.77
rectangular
106.4 - Ø82.55
SAE "A" 2 bolt flange
146.1 - Ø101.6
SAE "B" 2 bolt flange
89.8x89.8 - 101.6
SAE “B” 2/4 bolt flange
Code
B1
D36)
D46)
D56)
D66)*
D76)*
D86)*
E3
E4
E5
E6*
E7*
E8*
J5*
J7*
J8*
J9*
L1*
L2*
L3*
Port Options
No ports
3/4 - 16 UNF thread
7/8 - 14 UNF thread
1 1/16 - 12 UN thread
1 5/16 - 12 UN thread
1/2 - 14 BSP thread
5/8 - 14 BSP thread
3/4 - 16 BSP thread
1 - 11 BSP thread
Motor Drain Option
no drain
9/16-18 UNF thread
1/4 BSP thread
Code
S26)*
Port Options
3/4"-3/8-16 UNC
SAE Split Flange
1"-3/8-16 UNC
S36)*
SAE Split Flange
1 1/4"-7/16-14 UNC
S46)*
SAE Split Flange
1 1/2"-1/2-13 UNC
S56)*
SAE Split Flange
2"-1/2-13 UNC
S66)*
SAE Split Flange
T2*
19.0 mm - M10
T3*
25.4 mm - M10
T4*
31.8 mm - M10
T5*
38.1 mm - M12
T6*
50.8 mm - M12
displacement,
side suction port,
side pressure port,
rear suction port,
rear pressure port.
53
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 640
Ordering Code
640
PG
Type
Gear
design
Code
P
M
Unit
Dis- Rotation Shaft
placement
Side
Rear
Rear
Flange Shaft Side
seal Suction Pressure Suction Pressure
Port
Port
Port 1) Port 1)
Type
Pump
Motor
Code
Unit
A
Pump
Single unit
B
Multiple unit
C
—
Motor
Standard Motor
without checks
Standard Motor
with two checks
Standard Motor
Displacement
Code
ccm
0300
30.0
0350
35.0
0400
40.0
0450
45.0
0500
50.0
0550
55.0
0600
60.0
0650
65.0
0700
70.0
0750
75.0
0800
80.0
0900*
90.0
0100
100.0
*) Non standard, on
request only
Code
C
A
B
Code
D1
E1
E4
N1
Code
X
N
V
T
Rotation
Clockwise
Counter clockwise
Bi-directional
Code
A3
Shaft
13T, 16/32DP, 41.2L,
SAE ”B” spline
15T, 16/32DP, 46.0L,
SAE ”B-B” spline
14T, 12/24DP, 55.6L,
SAE ”C” spline
1 1/4" Keyed SAE-C
A4
H3
K3
54
Shaft Seal
No seal
NBR
FPM
PTFE
(motors only)
Flange
89.8x89.8 - Ø101.06,
SAE "B" 4 bolt square flange
114.5x114.5 - Ø127, SAE "C"
4 bolt square flange
146.1 - Ø101.06
SAE "B" 2 bolt flange
181.0 - Ø127
SAE ”C” 2 bolt flange
1)
Only coded for
the last section.
2)
Only for motors
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 640
Ordering code
B 1 B 1
No rear ports
(rear ports on request)
3)
640
Motor
Drain
Option 2)
Drain
Section
Posi- Connection
tion 2)
Unit
Displace- Shaft
Side
Side Pres- Rear Rear Presment
Seal Suction sure Port Suction sure Port 1)
Port
Port 1)
Code
B1
D54)
D64)*
D74)*
D84)*
E4
E5
E6*
E7*
E8*
J8*
J9*
L2*
L3*
Port Options
No ports
1 1/16 - 12 UN thread
1 5/16 - 12 UN thread
5/8 - 14 BSP thread
3/4 - 16 BSP thread
1 - 11 BSP thread
18 mm - Ø55 mm - M8
square
26 mm - Ø55 mm - M8
square
19 mm-Ø40 mm-M8
diamond
27 mm-Ø51 mm-M10
diamond
Code
S
C
Section Connection
Separate inlets
Common inlets
Code
2
3
4
Drain Position
Drain on bottom
Drain on top
Rear drain
Code
B1
C
G
Motor Drain Option
no drain
9/16-18 UNF thread
1/4 BSP thread
Code
S24)*
Port Options
3/4"-3/8-16 UNC
SAE Split Flange
1"-3/8-16 UNC
S34)*
SAE Split Flange
1 1/4"-7/16-14 UNC
S44)*
SAE Split Flange
1 1/2"-1/2-13 UNC
S54)*
SAE Split Flange
2"-1/2-13 UNC
S64)*
SAE Split Flange
T2*
19.0 mm - M10
T3*
25.4 mm - M10
T4*
31.8 mm - M10
T5*
38.1 mm - M12
T6*
50.8 mm - M12
displacement,
side suction port,
side pressure port,
rear suction port,
rear pressure port.
55
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 620
Performance data
60
Flow at n=3500 rpm
56
26
52
24
48
22
60
55
130
120
110
50
100
44
45
90
20
40
40
80
18
36
35
70
30
60
25
50
20
40
15
30
10
20
5
10
0
0
32
14
28
12
24
10
20
8
16
I. Power at n=3500 rpm
Flow at n=1500 rpm
12
4
8
2
4
0
0
0
50
100
150
200
160
150
Flow at n=3500 rpm
140
65
130
60
120
55
110
Flow at n=1500 rpm
0
50
100
80
200
250
300
Pressure [bar]
75
70
160
150
Flow at n=3500 rpm
140
65
130
60
120
55
110
50
100
50
100
45
90
45
90
40
80
40
80 Flow at n=1500 rpm
35
70
35
70
30
60
Flow at n=1500 rpm
30
60
25
50
25
50
20
40
20
40
15
30
15
30
10
20
10
20
5
10
5
10
0
0
0
0
Flow at n=500 rpm
0
150
PGP 620 - 52.0 CC
Input Power [kW]
70
Flow [l/min.]
75
Flow at n=500 rpm
250
300
Pressure [bar]
PGP 620 - 41.0 CC
80
Flow at n=3500 rpm
Flow at n=500 rpm
Flow [l/min.]
16
6
Input Power [kW]
65
Flow [l/min.]
28
PGP 620 - 26.0 CC
Input Power [kW]
30
Flow [l/min.]
Input Power [kW]
PGP 620 - 16.0 CC
50
100
150
200
250
300
Pressure [bar]
Flow at n=500 rpm
0
50
100
150
200
250
300
Pressure [bar]
Fluid Temperature = 45± 2 °C
56
Parker Hannifin
Chemnitz, Germany
Series PGP 625
Performance data
70
30
60
25
50
20
40 Flow at n=
1000 rpm
15
30
10
20
5
10
0
0
I. P
ow
er
at
n=
15
00
rp
m
Flow at n=1500 rpm
rpm
0
00
n=1
t
a
r
we
0 rpm
Flow at n=50
I. Po
m
0 rp
=50
r at n
we
I. Po
0
50
100
150
200
250
300
Pressure [bar]
70
30
60
25
50
20
40
15
30
10
20
5
10
0
0
rpm
t n=
24
00
35
Flow at n=1500 rpm
Flow at n=1000 rpm
rpm
00
0
=1
at n
er
ow
I. P
0 rpm
Flow at n=50
m
0 rp
0
n=5
r at
e
w
I. Po
0
50
100
150
200
250
300
Pressure [bar]
25
50
20
40
15
30
10
20
5
10
0
0
tn
=1
50
0
Flow at n=1000 rpm
I.
at
wer
I. Po
0
50
100
120
55
110
50
100
45
90
40
80
35
70
30
60
25
50
20
40
15
30
10
20
5
10
0
0
Flow at n=2400 rpm
n=
24
00
rpm
60
130
m
0 rp
0
n=5
150
r
00
10
=
tn
pm
a
r
we
Po
Flow at n=500 rpm
200
250
300
Pressure [bar]
Flow at n=1500 rpm
Flow at n=1000 rpm
I. P
ow
er a
t
Flow at n=1500 rpm
60
65
140
m
70
rp
35
70
Flow [l/min.]
90
80
Input Power [kW]
pm
100
40
30
Flow at n=2400 rpm
ra
45
110
at n
=2
40
0r
50
80
120
I. P
ow
e
55
40
PGP 625 - 50.0 CC
I. P
ow
er
60
Flow [l/min.]
Input Power [kW]
PGP 625 - 45.0 CC
Flow at n=2400 rpm
90
I. P
ow
er a
35
45
100
I. P
ow
er
at
n=
15
00
rp
m
80
m
Flow at n=2400 rpm
50
Flow [l/min.]
Input Power [kW]
90
rp
40
PGP 625 - 41.0 CC
I. P
ow
er
at
n=
24
00
45
Flow [l/min.]
Input Power [kW]
PGP 625 - 36.0 CC
pm
0r
0
15
t n=
ra
e
ow
I. P
rpm
00
0
1
=
at n
wer
.I Po Flow at n=50
0 rpm
0
50
rpm
=500
er at n
I. Pow
100
150
200
250
300
Pressure [bar]
Fluid Temperature = 45± 2 °C
57
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 640
Performance data
50
110
100
45
90
40
80
Flow at n=3000 rpm
70
30
60
25
50
15
30
10
20
5
10
0
0
Flow at n=500 rpm
0
50
100
150
200
250
300
Pressure [bar]
260
90
180
80
160
70
140
60
120
50
100
40
80
30
60
40
10
20
0
0
55
50
110
Flow at n=3000 rpm
90
80
Flow at n=1500 rpm
70
60
25
50
20
40
15
30
10
20
5
10
0
0
Flow at n=500 rpm
0
50
100
150
200
250
300
Pressure [bar]
Flow at n=500 rpm
50
100
150
260
Flow at n=3000 rpm
240
220
100
200
90
180
80
160
70
140
60
120
50
100
40
80
30
60
20
40
10
20
0
0
Flow at n=1500 rpm
0
100
30
110
20
120
120
220
200
60
130
240
100
130
Input Power [kW]
110
Flow [l/min.]
Input Power [kW]
120
65
PGP640 - 80.0 CC
PGP640 - 65.0 CC
130
140
35
40
Flow at n=3000 rpm
150
40
Flow at n=1500 rpm
20
70
160
45
35
75
Flow [l/min.]
55
120
80
Flow [l/min.]
60
PGP640 - 50.0 CC
130
Input Power [kW]
65
Flow [l/min.]
Input Power [kW]
PGP640 - 30.0 CC
200
Flow at n=1500 rpm
Flow at n=500 rpm
250
300
Pressure [bar]
0
50
100
Fluid temperature: 45± 2 °C
Viscosity: 36 mm2/s
Inlet pressure: 0.9 + 0.1 bar absolute
58
150
200
250
300
Pressure [bar]
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 620
PGP/PGM 620 Specification - Standard Displacements - Single Unit
Code
0160
0190
0230
0260
0290
0330
0360
0370
0410
0440
0500
0520
cm³/rev
16.0
19.0
23.0
26.0
29.0
33.0
36.0
37.0
41.0
44.0
50.0
52.0
bar
275
275
275
275
275
275
250
250
220
210
210
210
Minimum Speed
rpm
500
500
500
500
500
500
500
500
500
500
500
500
Maximum Speed
rpm
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3000
3000
Dimension "X"
Dimension "Y"
Approx. Weight
mm
mm
kg
79.2
82.5
86.9
90.2
93.5
97.9 101.2 102.3 106.7 110.0 116.6 118.8
122.7 126.0 130.4 133.7 137.0 141.4 144.7 145.8 150.2 153.5 160.1 162.3
12.0
12.1
12.2
12.3
12.6
12.7
12.8
12.9
13.0
13.1
13.3
13.4
20.32
Pump Displacement
134 across body
27
27
20.32
Dim ‘N’ ‘X’ ±0.5
142.2 max.
50.8 max.
Dim ‘N’ ‘Y’ ±0.5
Dimension Flanges see pages 63 to 64
59
Parker Hannifin
Chemnitz, Germany
Series PGP 625
PGP 625 Specification - Standard Displacements - Single Unit
Code
0360
0410
0450
0500
cm³/rev
36.0
41.0
45.0
50.0
bar
280
280
260
230
Minimum Speed
rpm
500
500
500
500
Maximum Speed
rpm
3500
3500
3500
3000
Dimension "X"
Dimension "Y"
Approx. Weight
mm
mm
kg
101.2
144.7
12.8
106.7
150.2
13.0
110.0
153.5
13.1
116.6
160.1
13.3
20.32
Pump Displacement
134 across body
27
27
20.32
Dim ‘N’ ‘X’ ±0.5
142.2 max.
50.8 max.
Dim ‘N’ ‘Y’ ±0.5
60
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 620
PGP/PGM 620 Specification - Standard Displacements - Tandem Unit
Pump Displacement
Dimension "X"
Code
0160
0190
0230
0260
0290
0330
0360
0370
0410
0440
0500
0520
cm³/rev
16.0
19.0
23.0
26.0
29.0
33.0
36.0
37.0
41.0
44.0
50.0
52.0
mm
79.2
82.5
86.9
90.2
93.5
97.9
101.2
102.3
106.7
110.0
116.6
118.8
mm
120.2
123.5
127.9
131.2
134.5
138.9
142.2
143.3
147.7
151.0
157.6
159.8
mm
115.2
118.5
122.9
126.2
129.5
133.9
137.2
138.3
142.7
146.0
152.6
154.8
Approximate Weight
(front section)
kg
12.0
12.1
12.2
12.3
12.6
12.7
12.8
12.9
13.0
13.1
13.3
13.4
Approx. Weight
(rear section)
kg
10.4
10.5
10.6
10.7
11.0
11.1
11.2
11.3
11.4
11.5
11.7
11.8
20.32
Dimension "Y1 "
Dimension "Y2" max.
134 across body
Dim ‘N’ ‘Y2’ max.
20.32
41 ±1
142.2 max.
Dim ‘N’ ‘X’ ±0.5
50.8 max.
Dim ‘N’ ‘Y1’
61
Parker Hannifin
Chemnitz, Germany
Series PGP 625
PGP 625 Specification - Standard Displacements - Tandem Unit
Pump Displacement
Code
0360
0410
0450
0500
cm³/rev
36.0
41.0
45.0
50.0
Dimension "X"
mm
101.2
106.7
110.0
116.6
Dimension "Y1 "
mm
142.2
147.7
151.0
157.6
mm
137.2
142.7
146.0
152.6
kg
12.8
13.0
13.1
13.3
Approx. Weight
(rear section)
kg
11.2
11.4
11.5
11.7
20.32
Dimension "Y2" max.
Approximate Weight
(front section)
134 across body
Dim ‘N’ ‘Y2’ max.
20.32
41 ±1
142.2 max.
Dim ‘N’ ‘X’ ±0.5
50.8 max.
Dim ‘N’ ‘Y1’
62
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 620 / 625
PGP/PGM 620 / 625 Mounting Flange
118
14
44.9
44.9
55.5
151.1
44.9
121
Ø101.6 -0.05
44.9
9.4
Ø14.3
Code A3
108
147
14
57.25
Ø14.3
166.1
57.25
57.25
151
Ø127 -0.05
9.7
57.25
Code A4
55.5
122
Code D7
21.5
98.4
Ø50.77 -0.05
152
128
42.65
54.9
5.1
Ø12.5
55.5
63
Parker Hannifin
Chemnitz, Germany
PGP/PGM 620 / 625 Mounting Flange
Code H2
132 max.
12
106.4
140.6
Ø11
Ø82.55 -0.05
47.5
6.4
55.5
108
Code H3
176.2 max.
14
146
151.1
Ø14.3
Ø101.6 -0.05
60.5
5.1
108
55.5
176.2 max.
Code L3
41.2
73.0
59.0
77.7
150.4
89.8
Ø101.6 -0.05
44.9
9.4
146
Ø14.3
14.0
6 holes
44.9
89.8
64
Parker Hannifin
Chemnitz, Germany
Port options
Code J
European flange
G2
G2
T2
T2
PGP/PGM 620 / 625 Porting
Code L
4-Bolt flange
90°
Ø
D
ØD
ØB
ØB
45°
Code S
SAE split flange
PGP/PGM / 625 620
15.0
20.0
18.0
26.0
13.0
19.0
27.0
19.0
25.4
31.8
38.1
50.8
19.0
25.4
31.8
38.1
50.8
W
∅D C
Dimensions
35.0
40.0
55.0
55.0
30.0
40.0
51.0
47.63 22.23
52.37 26.19
58.72 30.17
69.82 35.71
77.77 42.88
47.63 22.23
52.37 26.19
58.72 30.17
69.82 35.71
77.77 42.88
T2
G2
12.5
13.0
15.0
15.0
13.0
15.0
18.0
14.0
20.6
20.6
20.6
20.6
20.6
21.4
20.6
20.6
20.6
W
65
Parker Hannifin
Chemnitz, Germany
C
∅B
T2
J5
J7
J8
J9
L1
L2
L3
S2
S3
S4
S5
S6
T2
T3
T4
T5
T6
G2
Thread
M6
M6
M8
M8
M6
M8
M10
3/8-16 UNC
3/8-16 UNC
7/16-14 UNC
1/2-13 UNC
1/2-13 UNC
M10
M10
M10
M12
M12
ØB
Code
Code T
Port options
PGP/PGM 620 / 625 Porting
Code E
BSP - thread
Code D
SAE straight thread
G1
T1
T1
G1
PGP/PGM 620 / 625
Code
D3
G1
Thread
T1
Dimensions
3/4-16 UNF
14.3
D4
7/8-14 UNF
16.7
D5
1 1/16-12 UN
19.0
D6
1 5/16-12 UN
19.0
D7
1 5/8-12 UN
19.0
D8
1 7/8-12 UN
19.0
E3
1/2-14 BSP
14.0
E4
5/8-14 BSP
16.3
E5
3/4-16 BSP
16.0
E6
1-11 BSP
18.0
E7
1 1/4-11 BSP
20.0
E8
1 1/2-11 BSP
22.0
66
Parker Hannifin
Chemnitz, Germany
Drive shaft options
PGP/PGM 620 / 625 Drive Shaft
Code D1
Code E1
Spline SAE “B”
13T - 16/32 DP
Flat root side fit
Spline SAE “B”-”B”
15T - 16/32 DP
Flat root side fit
33.3
30.5
Ø 21.5
Ø 18.3
Ø 25.4
25.7
Ø 25.4
38.1
46
41.2
Code M3
Square key
6.3x6.3x31.7
31.7
28.2 -0.2
Ø 25.4 -0.05
19
M8x1.25
Ø 25.4
Ø 27
6.3
3
38.6
Circlip of 1.6
46
67
Parker Hannifin
Chemnitz, Germany
Drive shaft options
PGP/PGM 620 / 625 Drive Shaft
Code T1
Woodruff key
4x7.5 DIN 6888
Spring washer
20.3
Nut
M14x1.5
Tightening torque
50 ± 10 Nm
M14x1.5
Ø 25.4
1.5
15
Ø 21.59
(11.2)
Taper 1:8
47
Code T2
Woodruff key
5x7.5 DIN 6888
Spring washer
25
Nut
DIN 934 M16x1.5
M16x1.5
Ø 25.4
2.4
15
Ø 25
(11)
Tightening torque
75 ± 10 Nm
Taper 1:5
51
PGP/PGM 620 / 625- Shaft Load Capacity
Code
D1
E1
E4
M3
T1
T2
Description
13T, 16/32 DP, 41.2L, SAE “B“
15T, 16/32 DP, 46L, SAE “B-B“
14T, 12/24 DP, 55.6L, SAE ”C”
Ø25.4, 6.3 KEY, M8, 46L, SAE “B-B“
Ø21.59, 11.2L, 4.0 KEY, M14x1.5
Ø25.0, 12.0 L, 5.0 KEY, M16x1.5
Torque [Nm] =
Torque Rating
[Nm]
272
460
(272)
325
218
350
228
spline
spline
splined
parallel
taper 1:8
taper 1:5
57.2
68
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 640
PGP/PGM 640 Specification - Standard Displacements - Single Unit
Pump Displ
Code
300
350
400
450
500
550
600
650
700
750
800
900
1000
cm³/rev
30.0
35.0
40.0
45.0
50.0
55.0
60.0
65.0
70.0
75.0
80.0
90.0
100.0
bar
310
310
310
310
310
310
290
265
245
225
210
190
180
Minimum Speed
at max. outlet pressure
rpm
500
500
500
500
500
500
500
500
500
500
500
500
500
Maximum Speed
at = inlet & max. Outlet
pressure
rpm
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
Dimension "X"
mm
128.6 128.6 131.8 131.8 135.6 135.6 138.4 138.4 142.2 142.2 142.2 149.8 149.8
Dimension "Y"
mm
176.1 176.1 182.7 182.7 189.3 189.3 195.8 195.8 203.2 203.2 203.2 216.4 216.4
Aprox. Weight
Kg
20.6
20.6
21.2
21.2
22.0
22.0
22.6
22.6
23.3
23.3
25.0
25.5
DIM. "Y"
36
170.8
25.4
DIM. "X"
36
160 across body
69
Parker Hannifin
Chemnitz, Germany
25.5
Series PGP, PGM 640
Dimensions
PGP/PGM 640 Specification - Standard Displacements - Tandem Unit
Pump Displ
Code
300
350
400
450
500
550
600
650
700
750
800
900
1000
cm³/rev
30.0
35.0
40.0
45.0
50.0
55.0
60.0
65.0
70.0
75.0
80.0
90.0
100.0
Dimension "X1"
mm
128.6
128.6
131.8
131.8
135.6
135.6
138.4
138.4
142.2
142.2
142.2
149.8
149.8
Dimension "Y1"
mm
176.1
176.1
182.7
182.7
189.3
189.3
195.8
195.8
203.2
203.2
203.2
216.4
216.4
Dimension "X2"
mm
44.3
44.3
47.8
47.8
50.5
50.5
54.3
54.3
57.8
57.8
57.8
63.4
63.4
Dimension "Y2"
mm
147.5
147.5
154.1
154.1
160.7
160.7
167.2
167.2
174.6
174.6
174.6
184.2
184.2
Aprox. Weight
front section
Kg
20.6
20.6
21.2
21.2
22.0
22.0
22.6
22.6
23.3
23.3
25.0
25.5
25.5
Aprox. Weight
rear section
Kg
20.1
20.1
20.7
20.7
21.5
21.5
22.1
22.1
22.8
22.8
24.5
25.0
25.0
DIM. "X2"
170.8
DIM. "X1"
DIM. "Y2"
25.4
DIM. "Y1"
160 across body
70
Parker Hannifin
Chemnitz, Germany
Series PGP 640 / 620
Dimensions
PGP 640/620 Specification - Standard Displacements - Tandem Unit
Pump Displ. 640
Code
300
350
400
450
500
550
600
650
700
750
800
900
1000
cm³/rev
30.0
35.0
40.0
45.0
50.0
55.0
60.0
65.0
70.0
75.0
80.0
90.0
100.0
Dimension "X1"
mm
128.6
128.6
131.8
131.8
135.6
135.6
138.4
138.4
142.2
142.2
142.2
149.8
149.8
Dimension "Y1"
mm
176.1
176.1
182.7
182.7
189.3
189.3
195.8
195.8
203.2
203.2
203.2
216.4
216.4
Pump Displ. 620
Code
160
190
210
230
260
290
330
360
370
410
440
500
520
cm³/rev
16.0
19.0
21.0
23.0
26.0
29.0
33.0
36.0
37.0
41.0
44.0
50.0
52.0
Dimension "Y2"
mm
115.2
118.5
120.7
122.9
126.2
129.5
133.9
137.2
138.3
142.7
146
152.6
154.8
Aprox. Weight
front section
Kg
20.6
20.6
21.2
21.2
22.0
22.0
22.6
22.6
23.3
23.3
25.0
25.5
25.5
Aprox. Weight
rear section
Kg
10.4
10.5
10.5
10.6
10.7
11
11.1
11.2
11.3
11.4
11.5
11.7
11.8
DIM. "Y1"
170.8
25.4
41
5.1
DIM. "X"
DIM. "Y2"
160 across body
71
Parker Hannifin
Chemnitz, Germany
Series PGP 640 / 625
Dimensions
PGP 640/625 Specification - Standard Displacements - Tandem Unit
Pump Displ. 640
Code
300
350
400
450
500
550
600
650
700
750
800
900
1000
cm³/rev
30.0
35.0
40.0
45.0
50.0
55.0
60.0
65.0
70.0
75.0
80.0
90.0
100.0
Dimension "X1"
mm
128.6
128.6
131.8
131.8
135.6
135.6
138.4
138.4
142.2
142.2
142.2
149.8
149.8
Dimension "Y1"
mm
176.1
176.1
182.7
182.7
189.3
189.3
195.8
195.8
203.2
203.2
203.2
216.4
216.4
Pump Displ. 625
Code
360
410
450
500
cm³/rev
36.0
41.0
44.0
50.0
Dimension "Y2"
mm
137.2
142.7
146
152.6
Aprox. Weight
front section
Kg
22.6
23.3
25.0
25.5
Aprox. Weight
rear section
Kg
11.2
11.4
11.5
11.7
DIM. "Y1"
170.8
5.1
41
25.4
DIM. "X"
DIM. "Y2"
160 across body
72
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 640
Code A3
132
118.0
44.9
170.8
44.9
Ø101.6 -0.05
118.0
Ø14.3
44.9
44.9
9.4
15.8
2
ot
sl
84.8
s
45°
.3
14
Ø
146.5
Code A4
114.5
184.1
Ø127 -0.05
Ø14.4
57.25
15.8
.
14
Ø
4
12.6
45°
84.8
73
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 640
Code H3
174
9.4
146
15.8
170.8
Ø101.6 -0.05
60
Ø14.1
84.8
132
213
Code K3
181
90.5
15.8
184.8
Ø127 -0.05
74
12.6
Ø17.5
132
84.8
74
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 640
Port options
Code J
European flange
G2
G2
T2
T2
PGP/PGM 640 Porting
Code L
4-Bolt flange
90°
Ø
D
ØD
ØB
ØB
45°
Code S
SAE split flange
PGP/PGM 640
18.0
26.0
19.0
27.0
19.0
25.4
31.8
38.1
50.8
19.0
25.4
31.8
38.1
50.8
W
∅D C
Dimensions
55.0
55.0
40.0
51.0
47.63 22.23
52.37 26.19
58.72 30.17
69.82 35.71
77.77 42.88
47.63 22.23
52.37 26.19
58.72 30.17
69.82 35.71
77.77 42.88
T2
G2
15.0
15.0
15.0
18.0
14.0
20.6
20.6
20.6
20.6
20.6
21.4
20.6
20.6
20.6
W
75
Parker Hannifin
Chemnitz, Germany
C
∅B
T2
J8
J9
L2
L3
S2
S3
S4
S5
S6
T2
T3
T4
T5
T6
G2
Thread
M8
M8
M8
M10
3/8-16 UNC
3/8-16 UNC
7/16-14 UNC
1/2-13 UNC
1/2-13 UNC
M10
M10
M10
M12
M12
ØB
Code
Code T
Series PGP, PGM 640
Port options
PGP/PGM 640 Porting
Code D
SAE straight thread
Code E
BSP - thread
G1
T1
T1
G1
PGP/PGM 640
Code
G1
Thread
T1
Dimensions
D5
1 1/16-12 UN
19.0
D6
1 5/16-12 UN
19.0
D7
1 5/8-12 UN
19.0
D8
1 7/8-12 UN
19.0
E4
5/8-14 BSP
16.3
E5
3/4-16 BSP
16.0
E6
1-11 BSP
18.0
E7
1 1/4-11 BSP
20.0
E8
1 1/2-11 BSP
22.0
76
Parker Hannifin
Chemnitz, Germany
Series PGP, PGM 640
Drive shaft options
Code D1
Code E1
50.8
42.6
38.1
33.3
41.2
Ø 28.6
Full spline
SAE involute spline
13 teeth - 16/32 pitch
flat root side fit
major dia 21.67 - 21.79
minor dia 18.631 max.
46
Code E4
SAE involute spline
Chamfer 15 teeth - 16/32 pitch
1.5 x 45° flat root side fit
major dia 24.87 - 24.97
Code N1
55.6
55.6
60.6
38.1
Square key
7.9 x 7.9 x 38.1
SAE involute spline
14 teeth - 12/24 pitch
flat root side fit
major dia 31.06 - 31.19
1.6
7.95
3.6
34.5
6.4
77
Parker Hannifin
Chemnitz, Germany
Ø31.74 -0.02
48.4
Full spline
35.20 +0.13
-0.12
60.6
Series PGP, PGM 500/600
Shaft Loads / Fluids
Shaft loads PGP/PGM500
Code
H1
P2
V1
A1
J1
K1
Q2
A1
C1
F5
K1
L6
S1
S2
S8
D1
E1
M1
M2
T1
Description
Type
Ø10.0, 3.0 key, no thread, 36L
Ø9.95, 8.8L, 2.4 key, M6
5 x 6.5 long shaft w/o coupling
9T, 16/32DP, 32L, SAE ”A”
Ø12.7, 3.2 key, no thread, 38L
Ø15.88, 4.0 key, no thread, 32L, SAE ”A”
Ø14.25, 5.5L, 3.0 key, M10x1
9T, 16/32DP, 32L, SAE ”A”
11T, 16/32DP, 38.2L, SAE 19-4
B8x32x36 DIN ISO 14 (similar to DIN 5462)
Ø15.88, 4.0 key, no thread, 32L, SAE ”A”
Ø19.05, 4.8 key, no thread, 32L, SAE 19-1
Ø17.0, 7.7L, 3.0 key, M12x1.5
Ø16.65, 12.0L, 3.2 key, M12x1.5
Ø20.0, 9.0L, 4.0 key, M14x1.5
13T, 16/32DP, 41.2L, SAE ”B”
15T, 16/32DP, 46.2L, SAE ”B-B”
Ø22.2, 6.3 key, no thread, 41.2L, SAE ”B”
Ø25.4, 6.3 key, no thread, 46L, SAE ”B-B”
Ø21.59, 11.2L, 4.0 key, M14x1.5
Connecting shaft for multiple units
Torque rating [Nm]
parallel
taper 1:8
tang drive
splined
parallel
parallel
taper 1:8
splined
splined
splined
parallel
parallel
taper 1:5
taper 1:8
taper 1:5
splined
splined
parallel
parallel
taper 1:8
PGP 502
PGP 505
PGP/PGM511
PGP 517
30
30
20
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
20
—
—
—
108
43
85
68
—
—
—
—
—
—
—
—
—
—
—
—
—
36
—
—
—
—
—
—
—
86
166
166
75
145
193
198
110
—
—
—
—
—
110
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
345
530
251
395
250
228
Shaft loads PGP/PGM600
Code
D1
E1
E4
M3
T1
T2
N1
Description
13T, 16/32 DP, 41.2L, SAE "B"
15T, 16/32 DP, 46.0L, SAE "B-B"
14T, 12/24 DP, 55.6L, SAE ”C”
Ø25.4, 6.3 KEY, M8, 46L, SAE “B-B“
Ø21.59, 11.2L, 4.0key, M14x1.5
Ø25.0, 12.0L, 5.0 KEY, M16x1.5
1 1/4" SAE-C
connecting shaft
Type
splined
splined
splined
parallel
tapered 1:8
taper 1:5
keyed
Torque rating]
620 [Nm
625 [Nm]
640 [Nm]
272
460
—
325
218
301
—
228
272
460
(272)
325
218
—
—
228
328
503
960
—
—
—
678
407
Formula to calculate shaft load
Hydraulic fluids
Type
Fluid composition
Max. working pressure [bar]
Max. speed [min-1]
Temperature
Seal
Hydraulic fluid
Mineral oil based on
hydraulic fluid acc. to ISO/DIN
See table drawings
See table drawings
-15 ... +80 °C
-15 ... +120 °C
NBR
FPM
HFB
Water-in-oil emulsion 40/60
140
1500
+2 ... +65 °C
NBR
HFC *
Water-glycol 40/60
140
1500
-15 ... +65 °C
NBR
HFD
Phosphate ester
140
1500
-10 ... +80 °C
FPM
* to be used with cast iron pumps/motors only
Parker does not give an explicit recommendation for certain fluid product, fluid brand or fluid manufacturer
The risk of using different kind of fluids has to be taken by the customer.
Flanges for suction and discharge ports
Please refer to Parker Bulletin 4040/UK.
78
Parker Hannifin
Chemnitz, Germany
List of available pump combinations
First pump
Second pump
PGP 502
PGP 502
PGP 511
PGP 511
PGP 517
PGP 620
PGP 625
PGP 640
X
PGP 505
Reading
Direction
PGP 505
X
X
X
PGP 517
X
X
PGP 620
X
X
X
PGP 625
X
X
X
PGP 640
X
X
X
Nomograph for Pipe Velocity
Flow
Q [l/min]
1000
800
Inside Pipe Diameter
[mm] d
Flow Velocity
v [m/s]
0.10
900
700
0.15
600
500
0.20
400
0.30
300
Maximum recommended
velocity for
200
0.50
150
100
80
0.40
90
70
60
060
70
60
2.50
070
50
2.00
090
40
1.50
30
1.25
1.00
50
20
40
0.75
1.20
HFB, HFC
Oil
Tank Return
20
2.00
2.50
3.00
HFB, HFC
0.50
4.00
Outlet
10
1.50
Inlet
15
30
080
1.00
5.00
Oil
15
6.00
7.00
8.00
10
8
9.00
10.00
9
7
15.00
6
5
20.00
4
3
d [mm] =
400 Q [l/min]
6
v [m/s]
30.00
40.00
50.00
2
79
Parker Hannifin
Chemnitz, Germany
X
Valve Applications for Pumps
Series PGP 500/600
Valve options
Pressure relief valve / adjustable internal vent
Introduction:
Parker`s valve program was developed in response to requests from OEM customers to reduce the number
and total cost of components on their machines. We addressed this challenge by integrating the valves
required for machine functions into our hydraulic pumps and motors.
This integration has reduced the number of purchased components, eliminated many of the hydraulic hoses
and associated fittings (and potential leak points), and reduced assembly labor cost on the production line.
PGP 502
PGP 505
PGP 511
CODE
RDAA
RDAB
RDAC
RDAD
RDAE
RDAF
RDAG
RDAH
RDAJ
RDAK
RDAL
RDAM
RDAN
RDAP
RDAQ
RDAR
RDAS
RDAT
RDAU
RDAV
RDAW
RDAX
RDAY
RDAZ
PGP 517
PGP 620
PGP 625
Pressure
bar
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
CODE
RDPA
RDPB
RDPC
RDPD
RDPE
RDPF
RDPG
RDPH
RDPJ
RDPK
RDPL
RDPM
RDPN
RDPP
RDPQ
RDPR
RDPS
RDPT
RDPU
RDPV
RDPW
RDPX
RDPY
RDPZ
80
Pressure
bar
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
Parker Hannifin
Chemnitz, Germany
Series PGP 500/600
Valve options / Ordering code
Priority Flow Divider
1VP- / CVP100Port Confi- Port Orienguration
tation
Code Port Configuration
Priority
Port
Code
A
End Priority, End Excess
B
C
D
Side Priority, End Excess
E
Double Side Ported
Code
Function
Excess
Port
Priority
Flow
Priority Port
R/V Setting
Code R/V Setting
J1
3/4-16UNF
00
Side Priority, Side Excess
J8
9/16-18UNF
A05
Adjustable 40 - 120 bar
End Priority, Side Excess
T1
3/8 BSP
A15
Port Orientation
05
50 bar
08
80 bar
10
100 bar
Excess Port
11
110 bar
120 bar
other on request
Code
No Relief Valve
A
Priority Port on Pump Inlet Side
J2
7/8-14UNF
12
B
Priority Port on Pump Outlet Side
J3
1-1/16-12UN
13
130 bar
T2
1/2 BSP
14
140 bar
T4
3/4 BSP
15
150 bar
16
160 bar
17
170 bar
18
180 bar
20
200 bar
Code
Function
A
B
PFD with Full Flow R/V
C
PFD with Pilot R/V
other on request
other on request
Code
P
EF
Function “A”
P
Priority Flow
08
8 lpm
11
11 lpm
15
15 lpm
19
19 lpm
23
23 lpm
30
30 lpm
38
38 lpm
other on request
P
EF
Priority Flow Divider With Full Flow R/V
Function “B”
EF
Priority Flow Divider With Pilot R/V
Function “C”
81
Parker Hannifin
Chemnitz, Germany
Series PGP 500/600
Valve options
Comments:
The Priority Flow Divider provides a constant and specified flow for power steering or other priority functions.
The balance of flow produced by the pump is available from the EF port for additional functions such as open
center directional control valves, fan drives , etc. It can also be fitted with a pressure relief valve
Variations for PGP 511 / 517 / 620 / 625 / 640
without priority relief valve (Function “A”)
with full flow priority relief valve (Function “B”)
with pilot priority relief valve (Function “C”)
Pressure Range
P-port Maximum
230 bar
EF-port Maximum
250 bar
Maximum Flows
for PGP 511
P-port
32 lpm
EF-port
70 lpm
max. input flow
70 lpm
for PGP 517 / 620 / 625 / 640
P-port
45 lpm
EF-port
100 lpm
max. input flow
100 lpm
Port Configuration „A“
Port Orientation „B“
Port Configuration „D“
Port Orientation „A“
82
Port Configuration „C“
Parker Hannifin
Chemnitz, Germany
Valve options
Series PGP 500/600
Side Mounted Priority Flow Divider (Load Sense or Fixed Flow)
Comments:
Piority Flow Dividers can also be direct mounted to the pressure port to provide a constant and specified flow
for power steering or other priority functions.
without priority relief valve (Function “A”)
with full flow priority relief valve (Function “B”)
with pilot priority relief valve (Function “C”)
Note: r elief valve in the steering unit is required.
control pressure settings and priority flow settings on request
P
Pressure Range
EF
for PGP 511 / 517
P-port Maximum
230 bar
EF-port Maximum
250 bar
for PGP 517 / 620 / 625 / 640
P-port Maximum
250 bar
EF-port Maximum
310 bar
Function “A”
LS
Maximum Flows
P
EF
for PGP 511
P-port
32 lpm
max. input flow
80 lpm
for PGP 517 / 620 / 625 / 640
P-port
45 lpm
max. input flow
160 lpm
Load Sensing Priority Valve
with Dynamic Load Sensing Signal
Function “F”
83
Parker Hannifin
Chemnitz, Germany
Series PGP 500/600
Valve options / Ordering code
1VP- / CVP100Port Confi- Port Orienguration
tation
Code Port Configuration
Function
Priority
Port
Code
Excess
Port
LS Port
R/V Setting
Control
Setting LS
Priority Port
Code
Control Setting LS
J1
3/4-16UNF
052
5.2 bar static
Side Priority, Side Excess
J8
9/16-18UNF
056
5.6 bar dynamic
End Priority, Side Excess
T1
3/8 BSP
062
6.2 bar dynamic
063
6.3 bar static
070
7.0 bar static / dynamic
Excess Port
090
9.0 bar dynamic
Port Orientation
J2
7/8-14UNF
093
9.3 bar static
Priority Port on Pump Inlet Side
J3
1-1/16-12UN
104
10.4 bar dynamic
Priority Port on Pump Outlet Side
T2
1/2 BSP
126
12.6 bar dynamic
T4
3/4 BSP
140
14.0 bar dynamic
186
18.6 bar dynamic
A
End Priority, End Excess
B
C
D
Side Priority, End Excess
E
Double Side Ported
other on request
Code
Code
A
B
Code
other on request
Function
D
LSPV, Static LS
E
LSPV, Static LS with Pilot R/V
F
LSPV, Dynamic LS
G
LSPV, Dynamic LS with Pilot R/V
LS
P
Code LS Port
X2
7/16- 20UNF female
Y1
1/4 BSP male
Y3
1/4 BSP
BX2
EF
other on request
Function “F”
LS
P
7/16- 20UNF Body Port
EF
other on request
Code R/V Setting
00
No Relief Valve
A05
A15
05
50 bar
08
80 bar
10
100 bar
11
110 bar
12
120 bar
13
130 bar
14
140 bar
15
150 bar
16
160 bar
17
170 bar
18
180 bar
20
200 bar
other on request
Function “G”
84
Parker Hannifin
Chemnitz, Germany
Series PGP 500/600
Valve options
Comments:
The Load sense Priority Valve provides priority flow on demand, typically for LS power steering: The balance of the
flow produced by the pump is available from the EF port for additional functions such as open center directional
control valves, fan drives , etc. When the power steering is idle, full pump flow is available for these functions
The selection of pilot relief and static or dynamic signal is dependent on the characteristics of the selected
steering unit.
without pilot relief, dynamic LS signal (Function “G”) / with pilot relief,
dynamic LS signal (Function “F”) without pilot relief, static LS signal / with pilot relief, static LS signal
Pressure Range
P-port Maximum
230 bar
EF-port Maximum
equal to max. rating of pump
Maximum Flows
for PGP 511
P-port
32 lpm
EF-port
70 lpm
max. input flow
70 lpm
for PGP 517 / 620 / 640
P-port
45 lpm
EF-port
100 lpm
max. input flow
100 lpm
Port Confiiguration „B“
Port Confiiguration „D“
85
Port Confiiguration „E“
Parker Hannifin
Chemnitz, Germany
Valves for Gear Motor Application
Series PGM 500/600
Valve options
Single Pressure Relief Valve
Comments:
Integral relief valve to protect the motor.
Motors with this valve may be applied in series with relief valve providing a limit to the pressure differential, and
hence, the output torque.
Variations for PGM 511 / PGM 620 / PGM 640
adjustable, with internal or external drain
Applications
Fan Drives, Mower Blade Drives, Compressor Drives and Water Pump Drives
Motor Range
Ranges
PGM 511
PGM 620
PGM 640 .
Maximum Flow
75 lpm
113 lpm
113 lpm
Pressure Range
25-250 bar
25-280 bar
25-310 bar
In
Out
R
86
Parker Hannifin
Chemnitz, Germany
Series PGM 500/600
Valve options
Single Pressure Relief Valve with Anti-Cavitation
Comments:
Motors fitted with this relief valve may be applied in series with relief valve providing a limit to the pressure
differential, and hence, the output torque.
The check valve allows the motor and driven load to “spool down” when the fluid supply is shut off or reduced
due to engine speed fluctuations.
In series operation, the check valve permits the motor to come to a controlled stop should the outlet flow be
suddenly blocked.
This valve reduces the risk of damaging the motor or blowing a hydraulic line.
Motors fitted with this valve are available with side or rear facing ports.
non-adjustable, with reverse flow check with internal or external drain
Applications
Fan Drives, Mower Blade Drives, Compressor Drives and Water Pump Drives
Motor Range PGM 511 / PGM 620 / PGM 640
Pressure Range
35-250 bar
Maximum Flow
100 lpm
Motor Range PGM511 / PGM 620 / PGM 640
CODE
RMAF
RMAP
RMAR
RMAV
RMBB
RMBD
RMBK
RMBP
RMBT
Pressure
bar
50
90
100
120
150
160
190
210
230
In
Out
R
87
Parker Hannifin
Chemnitz, Germany
Series PGM 500/600
Valve options
Cross Port Pressure Relief Valves
Comments:
Integral cross port relief to protect motor and to limit torque in both directions of rotation.
Motors fitted with this relief valve cover may be operated in series with other motors downstream when using
external case drain.
Limited change to the factory set is possible .
Side ports are standard in order to minimize overall length.
adjustable with internal and external drain
Applications
Fan Drives, Mower Reel Drives, and all low-medium power reversible drives
Motor Range
Ranges
PGM 511
PGM 620
PGM 640 .
Maximum Flow
75 lpm
113 lpm
113 lpm
Pressure Range
25-250 bar
25-280 bar
25-310 bar
A
B
R
88
Parker Hannifin
Chemnitz, Germany
Series PGM 500/600
Valve options
Cross Port Pressure Relief Valves with Anti-Cavitation
Comments:
Motors fitted this relief valve may be applied in series or in hydraulic transmission with relief valve providing a
limit to the pressure differential, and hence, the output torque.
The check valves allow flow to return to the inlet of the motor to prevent cavitation.
Motor available with side ports, rear ports or combination of side and rear ports.
non-adjustable with internal or external drain
Applications
Fan Drives, Mower Blade Drives, Water Pump Drives and reversible hydrostatic transmissions
Pressure Range
35-250 bar
Maximum Flow
100 lpm
Motor Range PGM 511 / PGM 620 / PG M640
A
B
R
CODE
RMCF
RMCP
RMCR
RMCV
RMDB
RMDD
RMDK
RMDP
RMDT
Pressure
bar
50
90
100
120
150
160
190
210
230
89
Parker Hannifin
Chemnitz, Germany
Series PGM 500/600
Valve options
Cross Port Pressure Relief Valves with Anti-Cavitation + Check Valves
Comments:
Motors with cross-port relief valve and anti-cavitation check valves in case drain passages are suitable for
open-circuit applications with closed center valves and hydrostatic transmissions. The check valves allow flow
to return to the inlet of the motor to prevent cavitation.
For winches, make up flow at low pressure is introduced at the case drain port.
non-adjustable, with reverse flow check with internal or external drain
Applications
Fan Drives, Mower Blade Drives, Water Pump Drives and reversible hydrostatic transmissions,
vibration drives on vibratory, rollers and winches
Pressure Range
25-250 bar
Maximum Flow
100 lpm
A
B
R
90
Parker Hannifin
Chemnitz, Germany
Series PGM 500/600
Valve options
Solenoid Proportional Pressure Relief Valve
Comments:
In a fan drive circuit fan speed is adjusted by providing a varying Pulse Width Modulated electrical current
signal to the proportional relief valve which controls the flow to the fan motor. The proportional valve is typically a normal closed type to assure failsafe full fan speed in case of a lost signal.
The anti-cavitation check valve allows the motor to spin freely when the fan is powered down.
normally open valves, increasing pressure with increasing current
normally closed valves, decreasing pressure with increasing current with internal or tank return
Applications
Fan Drives
Motor Range
Ranges
Maximum Flow
PGM 511
PGM 620
PGM 640 .
95 lpm
95 lpm
95 lpm
In
Pressure Range
Pressure Range
standby pressure differential: 5 bar
max. : equal to the max. pressure
rating of the motor
Standard Pressure
Relief Settings
100 / 210 / 350 bar other`s on
request
Termination
on request
91
Out
Parker Hannifin
Chemnitz, Germany
Series PGM 500/600
Valve options
Speed Sensor
This rugged, weather resistant speed sensor is a Hall
effect device. When externally powered, 30 square wave
digital pulses per output shaft revolution are produced.
By signal multiplication, 60 pulses per revolution can be
obtained. The installation of this economical sensor does
not affect the torque or side load capability of the motor
into which it is installed.
The sensor has reverse polarity protection but no short
circuit protection.
Speed sensor data
Operating voltage range
4.5...24 V (DC)
Operating temperature
-30°...100° C
Operating frequency range
0...10 KHZ
Sink current
0...20 mA (max.)
Connection
4 Pin (12mm) DIN Standard
NPN Output
Formula pull-up resistor value
(0.25 Watt, 5% tol.)
Courant/Tensione
4.5...24 V
Sink current
0...20 mA
State: off
= Resistor
k Ohm
(95% +V)
+V
State: on (max. 0.4 V DC)
0V
92
Parker Hannifin
Chemnitz, Germany
Seal Kits
Standard Seal Kits for pumps/motors 500 + 600
Model Code
Pump Series
TDN
SERIES 600
Pump Series
TDN
PGP502
Single
391 1832 810
PGP620
Single
8682-023-00N
Tandem
PGP505
PGP511
("S8F4")
PGP511S
PGP517
Tandem rear
8833-023-000
Single (FPM)
391 1832 811
Tandem
4070H-023-000
Single
391 1822 101
Tandem (FPM)
3911822474
Tandem
391 1822 102
Single (FPM)
8682-023-00V
Single
8611-023-00N
Single (Large size shaft)
8611-023-Q1N
8611-023-00V
PGP625
Single (M)
3911842351
391 1832 770
PGP620/PGP511
Tandem
8766-023-00N
Tandem
8677-023-0NE
PGP620/PGP511
Tandem (FPM)
8766-023-00V
Tandem rear
8677-023-000
PGP625/PGP511
Tandem (M)
3911842352
Triple PGP511
8832-023-0NX
Triple (sealed)
3911832720
Tandem (sealed section)
3911832766
PGP620/
PGP511/511
Pump with outboard bearing
3911832133
PGP620/620/
PGP511
Triple (FPM)
3911832716
PGP640
Single
3911832598
PGP640
Single FPM
3911832611
PGP640
Tandem (M)
3911832696
PGP640/PGP511
Tandem (M)
3911832798
PGP640/620/620
Triple Pump
3911832468
Split gear
8801-023-00N
Split gear (Large size sh.)
8801-023-Q1N
Split gear (FPM)
8801-023-00V
Split gear tandem rear
8850-023-000
Single
391 1822 071
Single FPM
391 1832 772
Tandem
391 1822 072
391 1822 073
391 1832 772
PGP517 /
PGP505
Tandem
391 1822 254
PGP517 /
PGP511
Tandem
391 1822 531
Motor Series
TDN
Model Code
PGM620
PGM502
Motor BI-ROT
391 1832 812
PGM505
Motor UNI-ROT
391 1822 101
Motor BI-ROT
391 1801 304
M11 + Bearing
Motor BI-ROT + Bearing
3911801340
("S2F3", "S8F4")
PGM517
3911832635
Single (FPM)
Triple
PGM511
3911832610
...T2K5...
Triple (FPM unsealed)
FPM 517/517/511/511
Model Code
Triple Pump
PGP620
Motor (Bi + Uni-Rot.)
8301-023-00N
Motor(large size shaft)
8301-023-Q1M
Motor with outboard bearing
3911832704
Motor with plain bearing
8772-023-00S
Motor FPM
8301-023-00M
Motor FPM (large shaft)
3911832086
Motor FPM with bearing
3911832087
Motor UNI-ROT
3911801335
Motor UNI-ROT FPM
3911801410
Motor BI-ROT
3911801336
PGM640
93
Motor Series
TDN
Motor (Bi + Uni-Rot.)
8782-023-00N
Motor (Bi + Uni-Rot.)-FPM
8782-023-00V
Motor (Bi+Uni-Rotat.)
3911801451
Parker Hannifin
Chemnitz, Germany
Heavy-duty Pumps
Series PGP 500/600
Ordering examples
Series PGP 640 Single Unit
PG P
640
A
PGP
Gear Design / Type
640
Series
A
0550
C
E4
A4
N
T3
B1
B1
L3
L2
B1
B1
PARKER Gear Pump
Unit
Single Unit
Displacement
55.0 cm³/rev.
C
Rotation Direction
Clockwise
E4
Shaft
SAE „C“ Spline, 14T, 16/32 DP
A4
Flange
Mounting Flange SAE 4 bolt „C“
N
Shaft Seal
Shaft Seal NBR
T5
Side Suction Port
SAE Metric Split Flange 1 1/2"
T3
Side Pressure Port
SAE Metric Split Flange 1"
B1
Rear Suction Port
No Port
B1
Rear Suction Port
No Port
0550
T5
PG P
517
A
PGP
Gear Design / Type
517
Series
A
0230
A
D1
H3
N
PARKER Gear Pump
Unit
Single Unit
Displacement
23.0 cm³/rev.
A
Rotation Direction
Counter Clockwise
D1
Shaft
SAE „B“ Spline, 13T, 16/32 DP
H3
Flange
Mounting Flange SAE 2 bolt „B“
N
Shaft Seal
Shaft Seal NBR
L3
Side Suction Port
Ø27 Diamond Flange
L2
Side Pressure Port
Ø19 Diamond Flange
B1
Rear Suction Port
No Port
B1
Rear Pressure Port
No Port
0230
94
Parker Hannifin
Chemnitz, Germany
Heavy-duty Pumps
Series PGP 500/600
Ordering examples
PG P
620
A
PGP
Gear Design / Type
620
Series
A
0330
C
D1
H3
N
D5
B1
B1
PARKER Gear Pump
Unit
Single Unit
Displacement
33.0 cm³/rev.
C
Rotation Direction
Clockwise
D1
Shaft
SAE „B“ Spline, 13T, 16/32 DP
H3
Flange
Mounting Flange SAE 2 bolt „B“
N
Shaft Seal
Shaft Seal NBR
D6
Side Suction Port
1 5/16 - 12 UN Thread
D5
Side Pressure Port
1 1/16 - 12 UN Thread
B1
Rear Suction Port
No Port
B1
Rear Pressure Port
No Port
0330
D6
Series PGP 511 Tandem Unit
PG P
511
PGP
Gear Design / Type
511
Series
B
B
0100
A
C1
H2
N
J7
H3
Single Unit
Displacement
10.0 cm³/rev.
A
Rotation Direction
Counter Clockwise
C1
Drive shaft
SAE 19-4 Spline 11T, 16/32 DP
H2
Flange
Mounting Flange SAE 2 bolt „A“
N
Shaft Seal
Shaft Seal NBR
j7
Side Suction Port
Ø - 20 mm European Flange
J5
Side Pressure Port
S
Section Connection
Separate Inlets
511
A
0110
X
J7
J5
B1
Series Second Section
Unit
Single Unit
Displacement
11.0 cm³/rev.
X
Shaft Seal
No Seal
J7
Side Suction Port
J5
Side Pressure Port
B1
Rear Suction Port
No Port
B1
Rear Pressure Port
No Port
110
A
PARKER Gear Pump
Unit
0100
S - 511
95
Parker Hannifin
Chemnitz, Germany
B1
Parker Worldwide
AE – United Arab Emirates,
Dubai
Tel: +971 4 8127100
[email protected]
AT – Austria, Wiener Neustadt
Tel: +43 (0)2622 23501-0
[email protected]
AT – Eastern Europe, Wiener
Neustadt
Tel: +43 (0)2622 23501 900
[email protected]
HU – Hungary, Budaoers
Tel: +36 23 885 470
[email protected]
IE – Ireland, Dublin
Tel: +353 (0)1 466 6370
[email protected]
IT – Italy, Corsico (MI)
Tel: +39 02 45 19 21
[email protected]
KZ – Kazakhstan, Almaty
Tel: +7 7273 561 000
[email protected]
AZ – Azerbaijan, Baku
Tel: +994 50 22 33 458
[email protected]
NL – The Netherlands, Oldenzaal
Tel: +31 (0)541 585 000
[email protected]
BE/LU – Belgium, Nivelles
Tel: +32 (0)67 280 900
[email protected]
NO – Norway, Asker
Tel: +47 66 75 34 00
[email protected]
BG – Bulgaria, Sofia
Tel: +359 2 980 1344
[email protected]
PL – Poland, Warsaw
Tel: +48 (0)22 573 24 00
[email protected]
BY – Belarus, Minsk
Tel: +48 (0)22 573 24 00
[email protected]
PT – Portugal, Leca da Palmeira
Tel: +351 22 999 7360
[email protected]
CH – Switzerland, Etoy
Tel: +41 (0)21 821 87 00
[email protected]
RO – Romania, Bucharest
Tel: +40 21 252 1382
[email protected]
CZ – Czech Republic, Klecany
Tel: +420 284 083 111
[email protected]
RU – Russia, Moscow
Tel: +7 495 645-2156
[email protected]
DE – Germany, Kaarst
Tel: +49 (0)2131 4016 0
[email protected]
SE – Sweden, Spånga
Tel: +46 (0)8 59 79 50 00
[email protected]
DK – Denmark, Ballerup
Tel: +45 43 56 04 00
[email protected]
SK – Slovakia, Banská Bystrica
Tel: +421 484 162 252
[email protected]
ES – Spain, Madrid
Tel: +34 902 330 001
[email protected]
SL – Slovenia, Novo Mesto
Tel: +386 7 337 6650
[email protected]
FI – Finland, Vantaa
Tel: +358 (0)20 753 2500
[email protected]
TR – Turkey, Istanbul
Tel: +90 216 4997081
[email protected]
FR – France, Contamine s/Arve
Tel: +33 (0)4 50 25 80 25
[email protected]
UA – Ukraine, Kiev
Tel: +48 (0)22 573 24 00
[email protected]
GR – Greece, Athens
Tel: +30 210 933 6450
[email protected]
UK – United Kingdom, Warwick
Tel: +44 (0)1926 317 878
[email protected]
ZA – South Africa, Kempton Park
Tel: +27 (0)11 961 0700
[email protected]
© 2016 Parker Hannifin Corporation. All rights reserved.
North America
CA – Canada, Milton, Ontario
Tel: +1 905 693 3000
US – USA, Cleveland
(industrial)
Tel: +1 216 896 3000
US – USA, Elk Grove Village
(mobile)
Tel: +1 847 258 6200
Asia Pacific
AU – Australia, Castle Hill
Tel: +61 (0)2-9634 7777
CN – China, Shanghai
Tel: +86 21 2899 5000
HK – Hong Kong
Tel: +852 2428 8008
ID – Indonesia, Tangerang
Tel: +62 21 7588 1906
IN – India, Mumbai
Tel: +91 22 6513 7081-85
JP – Japan, Fujisawa
Tel: +81 (0)4 6635 3050
KR – South Korea, Seoul
Tel: +82 2 559 0400
MY – Malaysia, Shah Alam
Tel: +60 3 7849 0800
NZ – New Zealand, Mt Wellington
Tel: +64 9 574 1744
SG – Singapore
Tel: +65 6887 6300
TH – Thailand, Bangkok
Tel: +662 186 7000
TW – Taiwan, New Taipei City
Tel: +886 2 2298 8987
VN – Vietnam, Ho Chi Minh City
Tel: +84 8 3999 1600
South America
AR – Argentina, Buenos Aires
Tel: +54 3327 44 4129
BR – Brazil, Cachoeirinha RS
Tel: +55 51 3470 9144
CL – Chile, Santiago
Tel: +56 2 623 1216
MX – Mexico, Toluca
Tel: +52 72 2275 4200
Ed. 2015-04-21
Europe, Middle East, Africa
Catalogue HY30-3300/UK. POD 02/2016, ZZ
EMEA Product Information Centre
Free phone: 00 800 27 27 5374
(from AT, BE, CH, CZ, DE, DK, EE, ES, FI, FR, IE, IL,
IS, IT, LU, MT, NL, NO, PL, PT, RU, SE, SK, UK, ZA)
US Product Information Centre
Toll-free number: 1-800-27 27 537
www.parker.com/pmde
Your local authorized Parker distributor

Gear Pumps / Motors

Transcription

Similar documents

Tailor Made Gear Pumps

Truck Hydraulics F1 F2 T1 VP1 PTO info Accessories

Publication - Future home of something quite cool

1 - Hidro-Elem Kft.

LKW-Hydraulik

ROBIT® FOREPOLING PRODUCT CATALOGUE

Axial Piston Variable Pump A10V(S)O (US

Die BUCHSTAVIER - Das Dosierte Leben

DIN EN ISO 9001:2000