In this box
Transcription
In this box
USB cable OPTIONAL SMART CARD CABLES Serial cable POWER CABLE USB cable DATA CABLE ECP parallel port cable In this box: ! ! ! ! OR ! TM ! OR ! UltraGrafix Magna™ ImageCard® & Magna™ UltraGrafix® Overlay Topcoat ! ImageCard Optional Supplies Kit Open the swing arm. Put the card output stacker in place. Load cards. © 2003-2004 Datacard Corporation. All rights reserved. Printed in U.S.A. Part number 539176-102, rev A. 3 2 1 This Quick Install Chart helps technical professionals with the installation sequence for the printer and driver. If you are not familiar with printer installation or if you want more detailed steps, see Chapters 6 and 7 in the User’s Guide. 1 3 2 3 7 1 3 Spool caps 2 Supply load the supply, and Take-up 4 5 If the printer has a laminator, remove the cartridge, 6 Install the print ribbon and close the swing arm. 5 Slide on the sleeve (1), remove the cover (2), and install the continuous cleaning roller (3). 4 To install the printer: PC Connect the power cable. 1 Printer replace the cartridge. 3 1 2 2 11 Magna ™ Printer USB data cable. Click Double-click Congratulations! You’ve completed printer and driver installation. Complete the Installation Report. Compare: your sample card & the factory-printed card. 15 (With a laminator, the printer will wait to warm up.) Open the Printer Toolbox, and then click Sample Card to print a sample card. 14 Follow the prompts to install the driver. Make settings (such as ribbon type) match the printer, ribbon, and cards. 13 Connect the parallel OR 12 PC ® ™ ® ImageCard & Magna UltraGrafix Insert the CD-ROM in the PC and click Install the Printer. Power on the printer and wait for it to initialize. 10 9 8 TM