Selecta Product Range

Transcription

Selecta Product Range
Born to Perform
Born to Perform
2011 - 2012 Buyers Guide
COPYRIGHT © SILVAN AUSTRALIA PTY. LTD. 2011
All prices are recommended prices and exclude any dealer installation and/or freight charges and are effective from 1st of November 2011. The company reserves the right to
change recommended prices and specifications without notice. All items in this Catalogue have been included in good faith on the basis that the goods described were available
at the time this Catalogue was published. Failure of suppliers to deliver in accordance with samples, descriptions, or at all, or other unintentional causes may result in some
lines being unavailable. Space may prevent some dealers from stocking all items. All brand names and product names used in this publication are trade names, registered trade
marks, or pending trade marks of their respective owners.
Reference No. SELNZ-BG-11
Reference No. SELNZ-BG-11
22 Sunshine Ave Te Rapa, Hamilton
Telephone: 07 849 6030 Fax: 07 849 6070
Dealer Enquiries Call:
Hayden Mills on 021 554 987 Email: [email protected]
2011 - 2012 Selecta Product Range
Selecta Product Range
Reference No. SELNZ-BG-11
Selecta Product Range
2011 - 2012 Buyers Guide
Index
SELECTA WAREHOUSE, DANDENONG, VICTORIA
62-65
9-18
19
52-55
31-33
25, 27, 28
24
29
76-79
20, 21
17, 25-27
28, 98
117
66
20-22
56-58
21, 33
67-75
59-61
49
36-44, 76-77
40, 41
44 - 47
48
49-55
4, 5
23
109-112
34-35
29-30, 85
75
118- 127
33
108
66
72
81-85
20-22
Hose
Hose Fittings
Hose Reels
Hypro Boomless Nozzle Kit
Knapsack Sprayers
Lightfoot Trailed Sprayers
& Accessories
Motorised Pumps
Mister
Motorised Sprayer, Pumps
& Accessories
Nozzles - By Droplet Spectrum
Nozzle Care & Maintenance
Nozzle Application & Drop Charts
Nozzle Broadacre (by Droplet)
Nozzle Drift reduction
Nozzle Specialty
Nozzle Caps, Holders & Accessories
Nozzle Adjustable
Oil pump
PakPumps 12 Volt & Accessories
Polytuff Tanks
Pumps - 12, 24 & 240 Volt & Accessories
Pumps - Adblue
Pumps - Diesel
Pumps - Energy Saving
Pumps - Garden Watering
Pumps - Household Pressurised
Pumps - Hypro
Pumps - Shurflo
Pumps - Selecta power
Pumps - Clear Water & Waste Water
Pumps - P.T.O Diaphram & Accessories
Pressure Gauges
Pressure Relief Valves & Regulator
Rakpak Portable Sprayers
Ramps ATV & Mower
Retractable Hose reels
87
84,114-117
29, 85-86
28
20, 21
16- 17
62,124
22
18, 62
89-100
91
92-93
89
95-98
89-100
101-107
84
48
65
76-79
62-65
52-54
45-47
123
120-121
122
66
62-65
124
125-127
60-70
108
59,75
13
24
49, 86
Reels Hose
Ropewick Applicators
Rotating Beacons
Safety Products
Selecta Blue range
Selecta Power Motor & Pump
Shurflo Pumps & Accessories
Solenoids
Spotpak Portable Sprayers
Spray Guns & Accessories
Spreaders
Squatpak Portable Sprayers
Stripperdome & Shields
Submersible Pumps
Tank Lids, Components & Fittings
Tanks Bare Chemical/Water
Tanks Bare Diesel
Tilt Trailer
Trailed Sprayers
Trailed Spreader
Trolley Sprayers
Trukpak & Utepak Sprayers
Water sensitive Paper
Water Transfer Pumps
Weather Meters & Accessories
Weedpak 12 Volt Sprayers
Weedpak Portable Sprayers
MERCHANDISE
TERMS AND CONDITIONS
FORM - ORDER FORM
FORM - CLAIM FORM
FORM - WARRANTY FORM
CUSTOM BUILD QUOTATION FORM
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
29, 49, 85-86
80
34
58
52-55
29, 124
62-65
73-74
9-11
80-84
23
18
14, 17
119,125-127
113-116
78-79
76-77
23
16
23
15
12
91
124
98
14
20
4-5
128
129
130
131
132
Index
12, 24 & 240 Volt Pump & Acc
12 volt Sprayers
Accessories Table 12 Volt Pumps
Adblue Pumps & Accessories
Air & Foam Compressors
ATV Sprayers & Accessories
Aluminium Loading Ramps
Bare Engines
Bare Tanks
Backpack Sprayer
Booms
Boomless Nozzles
Brass Connectors & Fittings
Centrifugal Pumps
Chapin Hand sprayers
Chemical Transfer & Handling
Compressor, Air & Foam
Control Boxes, Valves, Meters
Diaphragm Pumps & Accessories
Diesel Hose reels
Diesel Transfer Tanks
Diesepro Tanks
Dieselpak Tanks
Dieselpower Tanks
Diesel Pumps & Accessories
Display Stands
Fertilizer Spreaders
Filtration- Spraying
Fire Fighting Fighters
Fire Fighting Accessories
Flow Meters
Flotec Pumps
Foam Marker & Accessories
Gauges, Pressure & Accessories
Grain Saver
GPS Guidance Systems
Guns, Spray & Accessories
Hand Sprayers
p.3
Born to Perform
Selecta Merchandising
Store-in-Store Display
Selecta Merchandising
Selecta’s Store-in-Store concept has proven
to increase sales in store by showcasing fast
moving merchandise and spare parts in easily
identifiable and neatly arranged displays.
These Store-in-Store displays consist of black
gloss shelving in configurations to fit your store
layout, with header cards, reorder cards, and
matched with Selecta’s well packaged products
becomes a spraying and accessories store within
your store.
To qualify for a FREE Store-in-Store shelving
display: A minimum stock order (value
dependant on Display size) is required to be
placed in conjunction with the Display order.
Clothing from Selecta:
Clothing now available:
Silvan & Selecta corporate clothing is now available at exceptional pricing. You can either purchase them as they are, request for a small fee that your own
Company name be added to the items, or add these later yourselves. A great idea for updating your corporate uniforms! Simply add your clothing request to
your standard Selecta order.
DESCRIPTION
Silvan Jacket
Silvan Fleece Vest
Selecta Fleece Vest
Silvan Mens Polo Shirt
Selecta Mens Polo Shirt
Silvan Ladies Polo Shirt
Selecta Ladies Polo Shirt
PRODUCT CODE
3CJNC-SIL-*
PF04A-SIL-*
PF04A-SEL-*
210M-SIL-*
210M-SEL-*
210W-SIL-*
210W-SEL-*
LIST EX GST
$77.27
$45.45
$45.45
$23.64
$23.64
$23.64
$23.64
CAT
A
A
A
A
A
A
A
SIZE
S
S
S
M
M
10
10
SIZE
M
M
M
L
L
12
12
SIZE
L
L
L
XL
XL
14
14
SIZE
XL
XL
XL
2XL
2XL
16
16
* Add the size required to complete the product code (eg. 3CJNC-SIL-XL). Add your own company name on the other side to our logo at an additional cost.
p.4
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
SIZE
2XL
2XL
2XL
3XL
3XL
SIZE
3XL
3XL
3XL
4XL
4XL
Selecta Merchandising
Store-in-Store Display
Selecta 100, 200 and 400 litre Dieselpro Stand
Selecta 20, 50, 100 and 200 litre Spotpak Stand
The Selecta Spotpak stands are an extremely popular ‘silent salesman’. Designed to display a
20, 50, 100 and 200 litre Spotpak unit on a tiered stand, the Spotpak display is ideal for any retail outlet.
To qualify for a FREE Spotpak stand: A minimum order of 5 Spotpak units will qualify you for a new
Spotpak stand. Our Spotpaks now feature a new Spotjet Spray Gun. Made in Italy for Selecta, this
high quality, robust gun has a stainless steel spray lance, and a strong trigger assembly to
ensure comfortable spraying and long lasting quality. Code: 070-PAK
Talk to your Account Manager about the various options available in
our merchandising display program.
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.5
Selecta Merchandising
The new Dieselpro stand is ideal for showcasing the 100, 200 and 400 litre Low Profile units and
is stronger than ever. It features lockable castor wheels to allow the stand to be moved around the
store for higher visibility. Many stores move it outside the front of the store during the day, a great
way to promote the range to passing traffic. The display header card has a brochure holder to fit the
new DL sized Diesel Brochures.
To qualify for a FREE Dieselpro stand: A minimum order of 5 units (excluding 100 litre) will qualify
you for a new Diesel stand. The order must include one each of the low profile 200, 400 & 600
litre units. Code: 070-DIESELPRO
Born to Perform
What’s New
What’s New
Diesel
Diesel Pro
Diesel Steel
Dieselpro 200,400 & 600
Litre Diesel Transfer Units
with Lids
37
300 Litre
DieselSteel Unit
38
Diesel Power
50 Litre
DieselPower
Unit
44
12 Volt Piusibox Basic
Diesel pump kit
200 Litre
DieselPower
Unit
Diesel Power
Selecta Blue pumps
and accessories
47
Selecta Blue
Hand Pumps
52
Selecta Blue 240 Volt
Pump Kits
54
p.6
44
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
300 Litre
Diesel HD Unit
17 LITRE
ADBLUE™ TANK
39
PUMP
12 Volt Diesel
Power pump
45
Selecta Blue Storage
and Dispensing
Tank for AUS32
Urea solutions
??
DieselPower Diesel
Pump Kit
53
46
What’s New
Diesel Hi Flow Diesel Transfer Guns
Retractable
Diesel
Hose Reels
51
49
Hi Flow Wash Down Gun
Inline DieselPro
Counter
Baffling Foam for
Diesel Tanks
47
12 Volt Hi Flow
26.5 L/min Pump
85
50
65
12 Volt Rechargeable
16 Litre Weedpak
Knapsack Sprayer
20
1000 Litre Sled Fire fighters
35
13
200 Litre 12 volt TPL Unit
Speroni Automatic
Water Pump
82
New Model Triam
Spray Pistol
121
81
Born to Perform
For further information contact
Silvan/Selecta Customer Service
on (07) 849 6030
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.7
What’s New
Nehro Atomizing
Spray Gun
Born to Perform
Custom Build
RIGHT FOR YOU BECAUSE THEY’RE BUILT FOR YOU
Silvan has identified that our customers know exactly what they want in
equipment, but they sometimes find it difficult to source the product off the
shelf. Equipment needs for farmers, councils, contractors, pest controllers and
golf course curators are widely diverse, but there is now a solution to sourcing
the perfect product.
Agricultural and related products are now available to suit your specific
requirements from Silvan’s new division – Silvan Custom Build. Silvan now
provides custom built spraying, water transfer, diesel transfer, dust
suppression and land care products nationally. Silvan’s leading position in
the spraying equipment industry has given us excellent buying power. This
coupled with our manufacturing engineering experience means we can provide
professional advice to bring the most creative ideas to reality quickly and
efficiently.
Silvan is an importer and distributor of an extensive range of components
including pumps, tanks, controllers, nozzles, hydraulic fittings and valves;
a wide range of essential components that can be relied upon for
immediate application.
Your desire to have specially built products for your particular application
is no issue for the Silvan Custom Build team. See page 132 for your Custom
Build Quote Form.
For further information call Selecta customer service 0508 745 826 or email [email protected]
p.8
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
12 Volt Deluxe Spotpak Sprayers
ON/OFF SWITCH
LANCE HOLDER FOR
SAFER TRAVEL
INTERNAL BAFFLE TO
REDUCE SURGE
BAFFLED TANK
BAFFLED TANK
1” DRAIN PLUG FOR
EASY EMPTYING
The Selecta Spotpak range features the highest quality
components to give you hassle free spraying where ever
you are. Key features of the Spotpak range include:
6.8 L/MIN SHURFLO 12-VOLT
SPOT SPRAYING PUMP
• High quality and reliable Shurflo 12-volt pump from the USA with full Spare Parts back-up
supply. Selecta has been selling and fitting Shurflo pumps for over 30 years.
• Spotjet spray gun from Italy featuring a 600mm stainless steel lance, adjustable 30° offset
cone jet nozzle, viton seals suitable for a wide range of chemicals, and a comfortable
corrosion resistant hand piece with trigger lock
• UV stablised Polytuff tanks made in Australia with easy grip carry handles
• 6 metres of 8mm ID high quality delivery hose
• Tank lid and fittings from Italy
• 3 metre wiring loom for connection to 12-volt DC power
All of our Selecta Spotpaks are assembled in our purpose built manufacturing facility in
Dandenong, Australia to our strict quality standards.
SPOTJET SPRAY GUN AND
600MM STAINLESS STEEL LANCE
PUMP COVER TO PROTECT
THE PUMP & ELECTRICAL
CONNECTIONS
UV STABLISED POLYTUFF TANK
3 METRE WIRING LOOM
60 & 100 LITRE SPOTPAK DELUXE – 6.8L/MIN
The Spotpak Deluxe units boast all the key features of the Spotpak range plus:
• Continuous duty rating 6.8L/min open flow Shurflo pump (414kPa / 60psi) with Viton valves
and Santoprene diaphragms (Pump re-order code: 361-8000)
• Pump cover to protect the pump & electrical connections
• On/off switch fitting into the Pump cover for easy operation
• Internal baffle to reduce surge
• 1” drain plug for easy emptying
• Lance holder for safer travel
• Suction foot filter mounted to
bottom of tank for complete drainage
CODE
LENGTH
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
SPD60-S1
860mm
400mm
315mm
10kg
$686.96
A
SPD100-S1
1050mm
680mm
535mm
18kg
$895.65
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.9
12 Volt Deluxe Spotpak Sprayers
BAFFLED TANK
Born to Perform
Spotpak 12 Volt Sprayers
The Selecta Spotpak range features the highest quality components to give you hassle free
spraying where ever you are. Key features of the Spotpak range include:
• High quality and reliable Shurflo 12-volt pump from the USA with full Spare Parts back-up supply. Selecta has been selling and fitting
Shurflo pumps for over 30 years.
• Spotjet spray gun from Italy featuring a 600mm stainless steel lance, adjustable 30° offset cone jet nozzle, viton seals suitable for a wide
range of chemicals, and a comfortable corrosion resistant hand piece with trigger lock
• UV stablised Polytuff tanks made in Australia with easy grip carry handles
• 6 metres of 8mm ID high quality delivery hose
• Tank lid and fittings from Italy
• 3 metre wiring loom for connection to 12-volt DC power
All of our Selecta Spotpaks are assembled in our purpose built manufacturing facility in Dandenong, Australia to our strict quality standards.
Shurflo 3.8 L/min
Spotpak 12 Volt Sprayers
Purpose designed for
spot spraying
DRAWING
0861
Pictured: Battery
operated model
SP20-SLVBA
20 & 50 LITRE SPOTPAK – 3.8L/MIN
These two popular Spotpaks have the intermittent duty rated 3.8L/min open flow
(276kPa / 40psi) Shurflo pump fitted, and all the other key features of the Spotpak
range as shown above. (Pump re-order code: 361-SLV10-AA40)
CODE
LENGTH
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
SP20-SLV
540mm
285mm
250mm
4.5kg
$400.87
A
SP20-SLVBA*
540mm
285mm
250mm
5kg
$626.09
A
700mm
400mm
300mm
4.7kg
SP50-SLV
$452.17
A
BAT2
Replacement 6-volt Battery (two required)
$33.04
B
118-139
Replacement Battery Charger
$138.26
B
Warning - refer to vehicle or tractor manufacturer’s instructions for appropriate load and towing limits and fitting positions. Never fill the
spray tank capacity to exceed the vehicle or tractor manufacturer’s specified safe load carrying capacities. Note: 1 litre of water = 1kg
PRESSURE REGULATOR KITS &
ACCESSORIES
Ideal for 50, 100 and 200 litre 12 volt units. There are two
optional kits for users who require agitation, adjustable spray
pressures and flows. A must when using the 11.3L/min pump for
boom spraying and spot spraying. The RP1-24-3 is suitable for
mounting to the tank of 12 volt spray units and the RP1-24-4 is
suitable for mounting direct to the base of a stand alone Shurflo
pump as well as to Selecta 12 volt spray units, Also available as
a bare regulator (9620222).
p.10
* SP20-SLVBA includes battery
RP1-24-3
REFER TO PAGE 19 FOR
FURTHER INFORMATION
RP1-24-4
CODE
RP1-24-3
RP1-24-4
LIST (EX GST)
$173.91
$159.13
CAT
B
B
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Spotpak 12 Volt Sprayers
Shurflo 6.8 L/min
Pictured: SP200-S1
Purpose designed for
spot spraying
Spotpak 12 Volt Sprayers
DRAWING
Pictured: 200 litre
0164
DRAWING
Pictured: 100 litre
0164
Pictured: 50 litre
50, 100 & 200 LITRE SPOTPAK – 6.8L/MIN
These three best selling Selecta Spotpaks all feature:
• UV stabilised Polytuff tank suitable for agricultural chemical spraying
• Continuous duty rated 6.8 L/min open flow ( 414 kpa / 60 psi ) Shurflo Pump, with Viton valves and Santoprene diaphragms.
• ON/OFF Switch
• 6 mtrs of 8mm delivery hose
• Quality Spotjet spray gun with adjustable spray nozzle
• A 3 metre wiring harness with in line fuse and alligator clips
• Pump re-order code: 361-8000.
CODE
LENGTH
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
SP50-S1
700mm
400mm
300mm
6kg
$530.43
A
SP100-S1
800mm
475mm
395mm
10kg
$704.35
A
SP200-S1
1000mm
540mm
550mm
14kg
$843.48
A
300140
Basket filter option
$27.73
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.11
Born to Perform
Professional 12 Volt Series
100 LITRE UTEPAK & 200 LITRE TRUKPAK
The professional’s portable sprayer for those who require the
flexibility of different pumps and boom options. They are compact,
self-contained and can sit on the back of a utility, truck or trailer.
All units feature:
• PA series spray gun with 500mm stainless steel extension lance and flat fan nozzle
• Shurflo 6.8L/min. open flow pump 414kPa (60 psi) with Viton valves and
Santoprene diaphragm (reorder code: 361-8000)
• Fitted in-line suction filter
• In-built carry handles
• 6 metres of quality 10mm I.D. hose
• Pump fitted with on/off switch and 3 metre wiring loom
• Spill proof lid plus basket strainer
• Simply connect to 12-volt DC power
• Tank supplied with 4 brass 8mm mounting inserts in base
Professional 12 Volt Series
Optional Pumps in lieu of 6.8L/min pump:
• Shurflo 6.4L/min. open flow pump 690kPa (100 psi)
(reorder code: 361-8002-793-238)
• Shurflo 11.3L/min. open flow pump 310kPa (45 psi)
(reorder code: 361-2088)
Note: A pressure regulator is recommended for spot spraying
* TK200-S3R comes standard with RP1-24-3 Pressure regulator kit fitted
** TK200-S3B comes standard with boomless nozzle kit M99-75 (refer to page 28)
Pictured:
200 Litre Trukpak
DRAWING
DRAWING
0111
0110
Pictured:
TK200-S3B
Pictured:
TK200-S3B
CODE
Pictured:
100 Litre Utepak
OPEN FLOW
PRESSURE
LENGTH
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
414kPa (60psi)
414kPa (60psi)
690kPa (100psi)
660mm
1050mm
1050mm
580mm
580mm
580mm
490mm
535mm
535mm
13kg
18kg
18kg
$800.00
$852.17
$1,026.09
A
A
A
310kPa (45psi)
310kPa (45psi)
310kPa (45psi)
310kPa (45psi)
660mm
1050mm
1050mm
1050mm
580mm
580mm
580mm
580mm
490mm
535mm
535mm
535mm
13kg
18kg
18kg
18kg
$843.48
$973.91
$1,156.52
$1,121.74
A
A
A
A
IDEAL FOR SPOT SPRAYING
UP100-S1
TK200-S1
TK200-S6
6.8L/min.
6.8L/min.
6.4L/min.
IDEAL FOR BOOM SPRAYING
UP100-S3
TK200-S3
TK200-S3R*
TK200-S3B**
11.3L/min.
11.3L/min.
11.3L/min.
11.3 L/min.
BOOMLESS NOZZLE KIT
The Selecta Boomless Nozzle Kit replaces the need to fit a boom to your sprayer and makes it much easier to travel along fencelines
and through gates. With a doubled sided spray width 7 metres, it’s a great alternative to a boom.
M99-74 (single jet) – one sided with 3.5m spray width –
ideal for Shurflo 6.8L/min pump
M99-75 (two jet) – double sided with 7m spray width –
ideal with Shurflo 11.3L/min pump.
p.12
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
28
FO
R
SE
E
MO PAG
RE E
DE
TA
ILS
Rakpak 12 Volt Sprayers
The Selecta Rakpak sprayer has been designed to fit neatly on most ATV bikes and meet the strict weight
requirement of these vehicles.
RAKPAK PLUS 70 & 75 LITRE
4
BAFFLED TANK
Pictured:
75 litre Rakpak Plus
1
2
RP75N-S1
BAFFLED TANK
BAFFLED TANK
3
9
8
7
6
RAKPAK PLUS 70 LITRE*
The Rakpak Plus units boast all the key features of the
Rakpak range as outlined above plus:
• Pump cover to protect pump and electrics
• On/off switch fitting into the Pump cover for easy operation
• Lance holder to secure Spotjet Spray gun while travelling
• Anti-spill barrier around lid to protect rider
• Drain tap for easy drainage
• Internal baffle to reduce surge
Pictured:
70 litre Rakpak
DRAWING
0557
0557B
Warning - refer to vehicle or tractor manufacturer’s instructions for
appropriate load and towing limits and fitting positions. Never fill the
spray tank capacity to exceed the vehicle or tractor manufacturer’s
specified safe load carrying capacities. Note: 1 litre of water = 1kg
WEIGHT
LIST
WIDTH
HEIGHT
CAT
(DRY)
(EX GST)
850mm
390mm
12kg
$765.22
A
RP75N-S1
75 litre
OPEN
FLOW
6.8L/min.
414kPa (60psi)
800mm
RP70N-S1*
70 litre
6.8L/min.
414kPa (60psi)
800mm
850mm
390mm
12kg
$782.61
A
RP70-S1
70 litre
6.8L/min.
414kPa (60psi)
775mm
850mm
300mm
12kg
$739.13
A
RP70-S3
70 litre
11.3L/min.
310kPa (45psi)
775mm
850mm
300mm
12kg
$826.09
A
CODE
CAPACITY
PRESSURE
LENGTH
* Rakplus Units
200 LITRE TRAYLINK SPRAYER
This new unit is ideal for ‘Plug’n Play’ Spraying. Perfect for small
Cat I linkage applications, it can also be mounted on the tray of your
RTV. It features a 20L/min open flow 12-volt pump with 6 metres of
8mm delivery hose with the Selecta Spotjet spray gun as standard.
• UV Stabilised Polytuff Tank
• 200L tank with sump and Mini-Frame TPL (CAT 1)
• High capacity DDP-50 12V Pump (20L/min open flow) 13L/min @ 30psi
• Graduated regulator with pressure gauge for control and agitation.
• Two manual section valves for Spot and Boom spraying
• SpotJet spray gun with adjustable nozzle and 6 metres of 8mm I.D hose
• Hypro boomless nozzle set up can be attached at rear when unit is used attached
to a tractor, or easily moved to one end if unit is being used crossways on the
back of ute, mule or carryall
CODE
DESCRIPTION
LENGTH
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
K02A
200 Litre Traylink sprayer
1040mm
460mm
745mm
55kg
$2,506.51
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.13
Rakpak 12 Volt Sprayers
The 70 & 75 litre Rakpak Plus has everything you need for safe and
reliable ATV spraying.Its revolutionary design incorporates an anti-spill
barrier around the tank lid for extra protection, internal baffles that
make travelling smoother and safer, and a lance holder that’s moulded
into the tank for secure travel.
1. Lance holder secures lance while mobile
2. Adjustable telescopic spray lance with adjustable nozzle
3. Anti-spill barrier around tank lid to protect rider
4. Foot filter fitted to suction hoses
5. Drain tap to ensure easy and total drainage of the tank
6. Internal baffled design to maximise equal weight
distribution and reduce surge with twin suction lines
7. Elastic straps secures hose
8. Pump cover with on/off switch to protect pump and electrics
9. 6 metres of quality 8mm I.D. hose
* Pump Viton equipped
• Designed to fit most ATV bikes
• Standard with Shurflo 6.8L/min. open flow 414kpa (60psi) pump
• Supplied with hold down straps and 3 metre wiring loom
Born to Perform
WeedPak 12 Volt Sprayers
Pictured:
100 litre unit 5.3L/min
Pictured:
50 litre unit 5.3L/min
DRAWING
WeedPak 12 Volt Sprayers
10121
Pictured:
50 litre unit 2.4L/min
20, 50 & 100 LITRE WEEDPAKS
The Weedpak range of 12 volt sprayers are ideal for hobby and
lifestyle farmers and the home gardener.
Key features of the WeedPak 12 volt range of sprayers include:
DRAWING
10120
Pictured:
20 litre unit 2.4L/min
• UV Stabilised Polytuff Tank
• Reliable Selecta 12 volt non-hazardous chemical pump
• 2.4L/min open flow (240kPa / 35psi) – Available on 20 & 50 Litre units
• 5.3L/min open flow (413kPa / 60psi) – Available on 50 & 100 Litre units
• Corrosion resistant pump, lance and hose fittings
• Suitable for applying most types of chemicals
• 6 metres of 8mm ag delivery hose
• Telescopic spray lance
• Lock-on trigger for easy continuous spraying
• 3 metre wiring loom with inline fuse and alligator clips LBA-104
CODE
CAPACITY
OPEN FLOW
PRESSURE
LENGTH
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
WP20-M1
20 litre
2.4L/min.
35psi
540mm
285mm
250mm
4.5kg
$262.61
A
WP50-P1
50 litre
5.3L/min
60psi
700mm
400mm
300mm
6kg
$420.00
A
WP50-M1
50 litre
2.4L/min.
35psi
700mm
400mm
300mm
6kg
$378.26
A
WP100-P1
100 litre
5.3L/min
60psi
800mm
475mm
395mm
10kg
$573.91
A
SELECTA STRIPPERDOME SERIES
The Selecta Stripperdome has been specifically designed to eliminate spray drift when
spraying under vines, trees and other ground spraying applications where it is necessary
to spray around obstacles. Just connect it to your sprayer and you’re ready to go!
Features of the Selecta Stripperdome series include:
DRAWING
• 800mm flexible dome
• Zinc plated chemical resistant frame
• Height adjustable design with self-returning break-back device
• Free wheeling rotating dome designed to roll around obstacles
• Your choice of 12-volt or PTO pump models:
• 12-volt unit – ideal for ATV sprayers with a 12-volt pump
• PTO unit – ideal for linkage or trailed sprayers with a PTO pump
0100
Pictured: 800mm
unit with optional
brush skirt
Optional brushskirt ideal for fitting to Stripperdome in for
long growth situations. Pushes taller weeds down.
CODE
MODEL
VALVE NON-DRIP
SPRAY SWATH
WIDTH
WEIGHT (DRY)
LIST (EX GST)
CAT
SD03
12-Volt, flexible dome
EEZI Spray
800mm
800mm
16 kg
$1,200.00
A
SD02-600
PTO, flexible dome
Non-drip
600mm
600mm
16 kg
$1,156.52
A
SD11
Stripperdome Series 800mm Brush Skirt
$238.26
B
p.14
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Trolley Sprayers
PROFESSIONAL UNIT PICTURED
WITH OPTIONAL SPRAY GUN
Pictured:
Professional unit
with optional spraygun
25 LITRE TROLLEYPAK 12 VOLT
The Trolleypak MkII has been designed for easy portability, and
to reduce the strain of backpack sprayers. The unit is powered
by a rechargeable battery that will deliver hours of continuous
spraying. Both the Agricultural and Professional Trolleypak
sprayers share the following key features:
DRAWING
0934
0937
• 25 litre UV stabilised tank calibrated at 5 litre intervals
• Telescopic multi-positional handle
• Large screw down lid for easy filling and cleaning
• Stainless steel in line filter
• 6 metres of quality 8mm ID delivery hose
• 17amp/hr sealed lead acid battery and 8 hour charger
• Zinc plated frame
Pictured:
Agricultural unit
Professional unit features:
• Shurflo 6.8L/min open flow pump 414kPa / 60psi
• Pump cover to protect pump and electrics
• Pressure regulator and Pressure gauge built-in
• Optional spray lance – choose from the extensive
Selecta range (pages 80 - 83)
Agricultural unit features:
• 12 Volt 5.3L/min open flow pump 60psi
• Spotjet Spray gun with 600mm stainless steel lance and
comfortable hand piece with lockable trigger
Purpose designed for
spot spraying
CODE
DESCRIPTION
LENGTH
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
TR25-D
Agricultural sprayer
440mm
470mm
1070mm
18kg
$1,652.17
A
440mm
470mm
1070mm
21kg
TR25-P
Professional sprayer
$1,730.43
A
BAT3
Replacement 12-volt Battery
$106.09
B
118-143
Replacement Battery charger
$138.26
B
TROLLEY SPRAYER 20 LITRE 12 VOLT
Your portable sprayer for home, garden or farm.
Features include:
• Compact 20 litre UV stabilised tank with screw-down spill-proof lid
• 12-volt Shurflo pump, 3.8L/min. open flow 276kPa (40 psi)
• On/off switch and fuse
• Easy push trolley with 6 metres of quality 8mm I.D. delivery hose
• Rechargeable battery and charger supplied with unit
• Spotjet Spray gun with 600mm stainless steel lance and comfortable hand piece with lockable trigger
• Also available without trolley see product SP20-SLVBA on page 10
DRAWING
0900
Pictured:
SP20-SLVTR2
Shurflo 3.8 L/min
Purpose designed for
spot spraying
CODE
DESCRIPTION
LENGTH
WIDTH
HEIGHT
WEIGHT
(DRY)
LIST
(EX GST)
CAT
SP20-SLVTR2
20 litre Trolley Sprayer
930mm
450mm
860mm
10kg
$947.83
A
BAT2
Replacement 6-volt Battery (two required)
$33.04
B
118-139
Replacement Battery Charger
$138.26
B
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.15
Trolley Sprayers
Shurflo 6.8 L/min
Born to Perform
Lightfoot Series
For Hobby Farmers
The Selecta Lightfoot trailed series makes spot spraying
and boom spraying easy. Choose which boom and options
you require and then check the accessories table on page
page 19 to select which Lightfoot and pump combination
suits your application.
The LT10-P1 with 1 meter boom is ideal for towing behind
a ride on mower, where you can cut and spray in one pass.
Pictured: LT10-P1
Pictured: 100 Litre
Lightfoot with optional
1 metre boom
100 LITRE LIGHTFOOT 12 VOLT
This unit is ideal for towing behind a ride on mower.
Features include:
• Selecta Spotjet spray gun with 600mm stainless steel lance
• 100 litre UV stabilised tank with 1/2” drain outlet
• 5.3L/min open flow 12-volt pump
• Single axle with 16x6.5x8 tyres with metal rims
• Double tongue pin tow hitch
• 3 metre wiring loom with inline fuse and remote mountable on/off switch
• 6 metres 8mm ID delivery hose
DRAWING
Lightfoot Series
0928
Pictured: LT10-P1 with
optional L99-09 1 metre boom
CODE
DESCRIPTION
LENGTH
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
LT10-P1
5.3L/min. open flow pump, 414kPa(60psi)
1240mm
720mm
630mm
26kg
$1,026.09
A
300 LITRE 12 VOLT LIGHTFOOT
Pictured: LT35-S1
This Lightfoot sprayer can be towed behind ATV bikes or other vehicles
with a 50mm tow ball hitch.
Features include:
For Hobby Farmers
• 300 litre UV stabilised tank
• Single axle with 22x11x8 Mud Puppy tyres
• 50mm tow ball hitch
• Your choice of two 12 Volt pumps:
• LT35-S1: Shurflo 12 Volt 6.8L/min open flow pump 414kPa / 60psi (Pump
re-order code: 361-8000)
• LT35-S5: Shurflo 12 Volt 13.6L/min open flow fin cooled pump 310kPa / 45psi
(Pump re-order code: 361-2088-313-145)
• 12 Volt units feature wiring loom with remote mountable on/off switch
• Optional hose, reels, spray guns, booms, pressure regulators
300 LITRE MOTORISED LIGHTFOOT
Ideal for vineyards, nurseries & many other locations
Features include:
• 300 litre UV stabilised tank
• MC20/20 diaphragm pump 2000KPa (290 psi max pressure) 18.5L/min.
with control valve and guage coupled to Honda 4.0HP engine
• Suction Filter
• Single axle with 22x11x8 Mud Puppy tyres
• 50mm tow ball hitch
CODE
DESCRIPTION
HOSE & GUN
LENGTH
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
LT35-S1
Shurflo 6.8L/min. open flow, 414kPa (60psi)
Optional
1580mm
1160mm
870mm
72kg
$2,147.83
A
LT35-S5
Shurflo 13.6L/min. open flow, 310kPa (45psi)
Optional
1580mm
1160mm
870mm
72kg
$2,434.78
A
LT35-34
300 litre, 4.0 HP Honda, 18.5L/min., 2000 kPa
Optional
1580mm
1160mm
870mm
92.5kg
$4,626.09
A
p.16
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
300 litre Lightfoot Series Options
Pictured: LT35-S5 with
RP1-10 3 metre Boom
2
1
CODE
DESCRIPTION
3
LIST (EX GST)
CAT
L99-09
1 metre (2m spray swath)
$211.30
A
L99-08
2 metre (3m spray swath)
$245.22
A
RP1-10
3 metre (4m spray swath)
$327.83
A
see page 14
A
$273.04
A
2. STRIPPERDOME
Multiple
Stripperdome (see page 14)
3. BOOMLESS NOZZLE KIT (300 LITRE 12 VOLT UNITS ONLY)
L99-75
Boomless nozzle kit 2 jet ( see below )
28
BOOMLESS NOZZLE KIT
The Selecta Boomless Nozzle Kit replaces the need to fit a boom to your Rakpak and makes it much easier to travel along fencelines
and through gates. With a doubled sided spray width 7 metres, it’s a great alternative to a boom.
L99-75 (two jet) – double sided with 7m spray width –
ideal with Shurflo 11.3L/min pump with fitting for 300 litre Lightfoot.
HOSEREEL
FOR 300 LITRE
UNITS
FO
R
SE
E
MO PAG
RE E
DE
TA
ILS
PRESSURE
REGULATOR
For greater control of application
and agitation with 12V pumps
SEE PAGE 80
FOR SPRAY GUN
SPECIFICATIONS
CODE
OPTION
MAX PRESSURE
LIST (EX GST)
CAT
L99-01
Hosereel with 20m of 10mm I.D. hose & PA spray gun*
2000kPa/290psi
$573.91
A
L99-02
Pressure regulator with gauge (Unfitted does not include pump or filter)
$195.65
A
* Hose reel supplied unfitted to unit
Refer to page 19 for compatibility chart
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.17
300 litre Lightfoot Series Options
1. STAINLESS STEEL SPRAYBOOMS
Born to Perform
Squatpak Sprayer Series
The Selecta Squatpak spraying tanks are available either as fully furnished
spraying units complete with 12 volt or motorised pumps and hose kits, or
as bare tanks to fit your own pumps and hose combinations.
Features:
• The tanks are high quality polytuff, UV stabilised and impact resistant,
ideal for Australian conditions.
• The tanks feature recessed pump / engine mount and mounting
inserts for 1 or 2 hose reels.
• The internal baffles reduces surge when travelling
• Bare tanks are available in 300, 400 & 800 Litre capacities and have drain outlets
Squatpak Sprayer Series
Pictured: SQ300-S1
300 litre 12-volt unit
Pictured:
430-0800E
800 Litre
twin baffle tank
Pictured: 430-0300E
300 Litre single
baffle tank
Pictured: 430-0400E, 400 Litre single
baffle tank
300 and 400 litre units are available with
two 12 volt pump options:
• Shurflo 6.8L/min open flow pump 414kPa /
60psi (300 & 400 Litre units) with optional
hose reel
• Shurflo 13.6L/min open flow pump 310kPa
/45psi (400 Litre units only) with Hose reel
included
400 litre units are also available with 2
motorised pump options:
• Comet MC20/20 18.5L/min open flow
diaphragm pump 2000kPa / 290psi max
pressure coupled to Honda 4HP engine with
hose reel included
• Comet APS41 38L/min open flow diaphragm
pump 4000kPa / 580psi max pressure
coupled to Honda 5.5HP engine with hose
reel included
BAFFLED TANK
BAFFLED TANK
BAFFLED TANK
DRAWING
DRAWING
0598
0595
Pictured: SQ400-S5-1
Pictured: L04H2-34
430-0300E
300 Litre bare Tank with lid and breather
Optional
Optional
Optional
LIST
(EX GST)
$643.48
430-0400E
400 Litre Bare Tank with lid and breather
Optional
Optional
Optional
$730.43
A
430-0800E
800 litre Bare Tank with lid and breather
Optional
Optional
Optional
$1,156.52
A
SQ300-S1
300 litre with 8000 Series Shurflo 12V DC Pump 6.8L/min. open flow 414 kPa (60psi)
PA series
12mx10mm Optional
$1,304.35
A
SQ400-S1
PA series
12mx10mm Optional
$1,530.43
A
PA series
12mx10mm Optional
$1,686.96
A
PA series
20mx10mm Included
$1,982.61
A
L04H2-34
400 litre with 8000 Series Shurflo 12V DC Pump 6.8L/min. open flow 414 kPa (60psi)
400 litre with 2088 Series Shurflo 12V DC Pump 13.6L/min. open flow
310 kPa (45psi) with pressure reg.
400 litre with 2088 Series Shurflo 12V DC Pump 13.6L/min. open flow
310 kPa (45psi) with pressure reg.
400 litre with Honda 4.0HP MC2020 - 18.5L/min, 2000kPa(290psi)
Triam 49
20mx10mm Included
$4,147.83
A
L04H4-42
400 litre with Honda 5.5HP APS41 - 38L/min, 4000kPa(580psi)
Triam 49
20mx10mm Included
$4,947.83
A
CODE
SQ400-S5
SQ400-S5-1
PUMP TYPE
GUN
HOSE
REEL
WARNING - Refer to vehicle or tractor manufacturer’s instructions for appropriate load and towing limits and fitting positions. Never fill the spray tank capacity to exceed
the vehicle or tractor manufacturer’s specified safe load carrying capacities. Note: 1 litre of water = 1kg
p.18
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
SEE PAGES 79 FOR TANK DIMENSIONS
CAT
A
Accessories Table -12 Volt
PRODUCT
PRESS. SPRAY ALGARD
REG
SHIELD BOOMS
PAK BOOMS
CROSS FOLD BOOMS
1M
2M
3M
3M
4M
6M
✘
HYPRO BOOMLESS
NOZZLE
M99-74 M99-75
SPOTPAK
20LTR (SP20-SLV, SP20-SLVBA),
50LTR (SP50-SLV)
50LTR (SP50-S1), 60LTR (SPD60-S1)
100LTR (SP100-S1, SPD100-S1),
200LTR (SP200-S1)
✘
✘
✔
✘
✘
✘
✘
✘
✘
✔
✘
✔
✔
✔ ✔ ✔
✘
✘
✔*
✘
✔
✔
✘
✘
✔
✔
✔
✔
✔ ✔ ✔
✔ ✔ ✔
✘
✔
✘
✔
✔
✔
✘
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔ ✔
✔ ✔ ✔
✘
✔
✘
✘
✔*
✔*
✘
✔*
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✘
✔
✔
✔
✘
✘
✘
✘
✔*
✔*
✘
✔*
✘
✔*
Fitted
✔
✔
✔
✔
✘
✘
✘
✔
✘
✘
✘
✘
✘
✘
✘
✔
✔
✔
✘
✔
✔
✔
✔
✔
✔
✘
✔
✔
✔
✘
✔ ✔ ✘
✔ ✔ ✔
✔ ✔ ✔
✘ ✘ ✘
✘
✘
✔
✘
✘
✘
✘
✘
✘
✘
✔
✘
✘
✘
✔
✘
✔
✔
✔
✔
✔
✔
✔ ✔ ✔
✔ ✔ ✔
✘
✔
✘
✔
✔*
✔*
✘
✔*
Fitted
✘
✘
✔
✔
✘
✘
✔
✔
✘
✘
✘
✘
✘
✘
✘
✘
✘
✘
✘
✘
✔
✔
✘
✘
✘
✔
✔
✔
✘ ✘
✔ ✔
✘
✘
✘
✘
✘
✘
✘
✔*
✘
✘
✘
✔
✔
✔
✔
✔
✔
✔
✔
✔
✘
✘
✘
✘
✘
✘
✘
✘
✘
✔
✘
✔
✔
✔
✔
✔
✘
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✘
✔
✔
✔
✔
✔
✘
✔
✔
✔
✘
✔
✘
✔
✔
✔
✘
✘
✔
✔
✘
✘
✘
✘
✔
✔
✘
✘
✔
✔
✘
✘
✘
✘
✘
✘
✘
✘
✔
✔
✘
✔
✔
✔
✔
✔
✘
✔
✔
✔
✘
✘
✘
✔
✔
✔
✘
✘
✔
✔
RAKPAK
70LTR (RP70-S1, RP70N-S1)
70LTR (RP70-S3, RP70N-S3)
UTEPAK - 100 litre
UP100-S1
UP100-S3
TRUKPAK - 200 litre
TK200-S1, TK200-S6
TK200-S3
TK200-S3B
TK200-S3R
TROLLEYPAK - 20 litre
SP20-SLVTR2
LIGHTFOOT
100LTR (LT10-P1)
300LTR (LT35-S1)
300LTR (LT35-S5)
300LTR (LT35-34)
Fitted
SQUATPAK
300LTR (SQ300-S1), 400LTR (SQ400-S1)
400LTR (SQ400-S5, SQ400S5-1)
✔
Fitted
TROLLEYPAK MKII - 25 litre
✔
TR25-D
TR25-P
WEEDPAK SPRAYERS
20LTR (WP20-M1), 50LTR (WP50-M1)
50LTR (WP50-P1), 100LTR (WP100-P1)
12-VOLT PUMPS
361-SLV10-AA40
361-8000
361-8000-342-136
361-8002-793-238
361-2088
361-2088-313-145
381-38
381-2000
381-125
DDP-550, DDP-551
✘
✔
✔
✔
✔
✔
✘
✔
✔
✔
Fitted
✔* Unit may require
extra 186-12C hose
(sold separately) in order
to mount the nozzle kit
in a suitable location on
the vehicle
Also, if fitting on a unit
with a pressure regulator
(RPI-24-3), an adapter
(G8001151) will be
required (sold separately).
Accessories Table -12 Volt
✘
✔ Available option
✘ Not recommended
Fitted Already fitted
to unit
✔*
L99-75
Warning - refer to vehicle
or tractor manufacturer’s
instructions for appropriate
load and towing limits and
fitting positions. Never fill
the spray tank capacity
to exceed the vehicle or
tractor manufacturer’s
specified safe load carrying
capacities. Note: 1 litre of
water = 1kg
PRESSURE REGULATOR KITS & ACCESSORIES
Ideal for 50, 100 and 200 litre 12 volt units. There are two optional kits for users who require agitation, adjustable spray pressures and flows. A must when using
the 11.3L/min pump for boom spraying and spot spraying. The RP1-24-3 is suitable for mounting to the tank of 12 volt spray units and the RP1-24-4 is suitable
for mounting direct to the base of a stand alone Shurflo pump as well as to Selecta 12 volt spray units, Also available as a bare regulator (9620222).
RP1-24-3
RP1-24-4
CODE
RP1-24-3
RP1-24-4
LIST (EX GST)
$173.91
$159.13
CAT
B
B
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.19
Born to Perform
Hand / Backpack - Garden
5 & 8 LITRE “HOME GARDENER” WEEDPAK SPRAYERS
These portable WeedPAK hand sprayers are ideal for the home gardener and will make low
volume spot spraying easier and more efficient. The units come with a carry strap and feature
a wide neck for easy filling.
Features include:
• Ideal for most non hazardous chemicals
• Pressure 300kPa/43.5psi
• Chemical resistant tank
• Graduated scale to show tank contents
• Fitted with tank pressure relief valve
• Includes carry strap for easy portability
• Adjustable nozzle and spray lance
CODE
WP5-1
WP8-1
CAPACITY
5 litres
8 litres
DIAMETER
170mm
200mm
HEIGHT
550mm
600mm
WEIGHT (DRY)
1.75kg
2.1kg
LIST (EX GST)
$38.26
$45.22
CAT
A
A
Hand / Backpack - Garden
* Price for 8 units
CHAPIN PRO SERIES GENERAL PURPOSE HAND SPRAYERS
• Suitable for insecticides, fertilizers, herbicides and cleaning products
From
• Equipped with Viton seals and gaskets
USA
• Corrosion resistant spray lance
• Supplied with three different nozzles: Adjustable brass, adjustable plastic and flat fan plastic
• Surespray anti-clog filter in tank
• Suitable for diesel
CODE
CP-26021
CP-26031
CAPACITY
7.6 Litre
11.4 Litre
LENGTH
180mm
180mm
WIDTH
180mm
180mm
HEIGHT
530mm
640mm
WEIGHT (DRY)
1.85kg
2.1kg
LIST (EX GST)
$99.13
$108.70
CAT
A
A
15 LITRE “HOME GARDENER” WEEDPAK KNAPSACK
The reliable and easy to use 15 litre WeedPAK knapsack has been designed for the home
gardener where low volume spot spraying applications are required. The unit comes with
shoulder straps and a pump handle that can be mounted on both the left or right side.
Features include:
• Lockable spray lance trigger with fan or cone nozzle
• Spray lance handle includes filter
• Anti spill screw lid & strainer
• Left or right side pump handle
CODE
CAPACITY
LENGTH
WIDTH
HEIGHT
WEIGHT
(DRY)
LIST
(EX GST)
CAT
KN15-1
OPTION
CODE
15 litre
210mm
350mm
570mm
LENGTH
WIDTH
HEIGHT
$69.57
LIST
(EX GST)
A
DESCRIPTION
4kg
WEIGHT
(DRY)
CAT
Sprayshield
350mm
100mm
210mm
150 grams
$17.39
B
KN15-2
Pictured: Optional
WeedPAK Sprayshield KN15-1-1
Replacement Viton diaphragm
$13.04
16 LITRE 12-VOLT RECHARGEBLE
WEEDPAK KNAPSACK
• UV Stabilised Polytuff tank
• 2 stage filtration under the lid and on the
suction hose in the tank
• Rechargeable 12 volt battery & charger
• Contoured design for comfort against your back
• Heavily padded adjustable shoulder straps
p.20
• Maximum open flow 2.6 L/min
• Pressure rating 40psi
• Viton Valves
• Santoprene Diaphragm
• Intermittent Duty cycle
• Run Time Approx 4 hours
CODE
DESCRIPTION
LENGTH
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
WP16-1
16 Litre 12-volt Weedpak Knapsack
260mm
345mm
550mm
6.5kg
$251.30
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Hand / Backpack Sprayers - Professional
• Viton equipped
• 4 pressure settings from 15-60psi
• Easy operating spray handle for left or right handed use
• Spray handle with continuous spray feature
• Supplied with 3 different nozzles: Adjustable
brass, adjustable plastic & flat fan plastic
• Three stage filtration
• Spill free lid (even when tilted)
DIAPHRAGM FOR
WETTABLE POWDERS
From
USA
Ideal for weed control,
pest control and fertilizers
Optional constant flow valve available
• Easily adapts to spray lance with 3/8” threads
• Constantly maintains 21 psi output to the nozzle,
(if knapsack pressure falls below 21psi the
CF Valve stops flow to the nozzle). By providing
consistent pressure to the nozzle, spray patterns are
maintained, reducing chemical under-spray/ overspray
and improving efficiency.
Pictured: CP-61800
piston pump
DRAWING
10714
Pictured: CP-64800 diaphram pump
CODE
DESCRIPTION
LENGTH
WIDTH
HEIGHT
WEIGHT
(DRY)
LIST
(EX GST)
CAT
CP-61800
Piston pump
230mm
388mm
580mm
4kg
$151.30
A
CP-64800
Diaphram pump
230mm
388mm
580mm
4kg
$195.65
A
6-8501
Constant flow valve
$30.43
B
HEAVY DUTY AIR COMPRESSOR
Compact, easy to use 12V tyre inflators. Ideal for tractors, trucks, motorbikes, 4X4’s & heavy machinery.
• 12-volt, 30 Amp, max pressure 100psi
• Auto reset thermal overload protection
• Displacement: 60L/min @ 0psi (13.8V)
• Duty cycle 30min
• Comes with nylon hose, pressure gauge, aligator clips and chrome filter
• Hands free continuous and intermittent air down feature
• Neatly packs in a canvass bag for convenient storage and transport
CODE
DESCRIPTION
LENGTH
WIDTH
HEIGHT
WEIGHT
LIST (EX GST)
CAT
042C-8
Heavy Duty Air Compressor
300mm
140mm
200mm
4.5kg
$154.78
B
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.21
Hand / Backpack Sprayers - Professional
15 LITRE CHAPIN BACKPACK SPRAYER
Born to Perform
Hand Sprayers - Industrial
CHAPIN POLY HAND SPRAYER
An industrial, heavy duty, poly sprayer that
is ideal for corrosive type liquid and most
commercial applications.
Features include:
• Polyethylene pump
• Viton seals
• Braided hose
• 450mm lance and fan nozzle
• Pressure relief valve
• Padded strap
• Ideal for carpet and concrete applications
• Suitable for diesel
SEALS/
GASKETS
Viton
Hand Sprayers - Industrial
CODE
CP-2279
6-5368
Service Kit code
ADJ.
NOZZLE
Brass fan
CAPACITY
LENGTH
WIDTH
HEIGHT
11 litres
200mm
200mm
530mm
WEIGHT
(DRY)
2.5kg
Service kit to suit Chapin Heavy Duty Hand Sprayer (2008 onwards)
LIST
(EX GST)
$207.83ˆ
A
$55.65
B
CAT
CHAPIN HEAVY
DUTY HAND SPRAYER
CHAPIN INDUSTRIAL
HAND SPRAYER
Heavy duty industrial sprayer with brass
pump barrel capable of withstanding
aggressive solvents such as concrete sealer.
Hammer toned finish provides additional
protection against denting and brass suction
filter to prevent clogging
Features include:
An industrial sprayer with brass pump
barrel capable of withstanding aggressive
solvents such as concrete sealer.
Features include:
• 13 litre capacity
• Swage hose connections
• Brass lance and fan nozzles
• Viton seals
• Brass pump barrel
• Tripoxy lined tank
• Suitable for diesel
• 13 litre capacity
• Swage hose connections
• Brass lance and fan nozzles
• Viton seals
• Brass pump barrel
• Tripoxy lined tank
• Anti-clog filter
Pictured: CT-1979 • Durable hammer tone finish
• Suitable for diesel
Pictured: CT-1949
CODE
SEALS/ GASKETS
NOZZLE
CAPACITY
LENGTH
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
CT-1949
Viton
Brass fan
13 litres
200mm
200mm
660mm
4.6kg
$478.26
A
CT-1979
Viton
Brass fan
13 litres
200mm
200mm
660mm
4.6kg
$477.39
A
SERVICE
KIT CODE
6-4627
Service kit to suit Chapin Oil & Curing Compound Hand Sprayer (CT-1949)
$56.34
B
6-4629
Service kit to suit Chapin Oil & Curing Compound Hand Sprayer (CT-1979)
$137.77
B
MOTORISED MISTER
The motorised mister has the power to cover large areas quickly with a horizontal throw of
12 to 14 metres for liquids. Output capacities are 0.5 to 3 litres per minute for liquids.
Features include:
• Reliable 73cc two-stroke Efco motor
• Anti-vibration buffer suspension system
• 14 litre capacity poly tank
• Large screw down lid and strainer
• Delivery tube with variable flow adjuster
• Padded shoulder frame for operator comfort
CODE
ADJ. NOZZLE
NBB-M18 Yes
p.22
IMPROVED
ENGINE
CAPACITY
LENGTH
WIDTH
HEIGHT
WEIGHT
(DRY)
LIST
(EX GST)
CAT
14 litres
440mm
440mm
670mm
12.9kg
$1,495.65ˆ
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
ˆ INDENT ORDER
Spreaders
Pictured: Side
throw conveyor
ALSO
SUITABLE
FOR RODENT
BAIT
DRAWING
Pictured:
Articulated agitator
DRAWING
DRAWING
0175
0081
0676
Pictured: SP60-1 Superpak
Pictured: SP150 Economy Trailed
SUPERPAK ATV SPREADER
SP150 ECONOMY
TRAILED SPREADER
• 12-volt DC Compact spreader with
attachment frame
• 60 litre (70 kg) non-corrosive hopper
with easy load flip-up lid
• Quick attach frame system
• Rate adjustment lever
• Electric on/off control box
• 4 blade spinner
• 304 stainless steel feed gates
Code: SP60-1
Pictured: SX Series (SX-500GALHOP)
Linkage Spreader with optional
galvanised hopper
SX SERIES LINKAGE SPREADER
• Quality grease packed gearbox and two
piece cast aluminium housing
• Constantly engaged ground drive, one driven
wheel, one free wheel
• 4 adjustable spreading vanes each
with 3 settings
• Simple, single lever rate control
• Mechanical spindle agitation
• Adjustable drawbar – 5 height positions
• 3 easily selectable spreading patterns
• Spreading disc with 4 rotor blades able to be
set in 5 positions
• Optional side throw conveyor is ideal for side
spreading
• Optional articulated agitator is recommended
when spreading powdery fertilisers and lime
Code: SX-***
Code: SP150
LENGTH
(MM)
750
1400
900
1000
1180
1180
CAPACITY
SP60-1
SP150
SX-150
SX-300
SX-500
SX-500GALHOP
60 litre
150 litre
150 litre
196 litre
338 litre
338 litre
CODE
OPTIONS TO SUIT SX-SERIES SPREADER
PAX26
PAX20
Side throw conveyor
Articulated Agitator (Lime agitator)
WIDTH
(MM)
690
850
900
1000
1180
1180
HEIGHT
(MM)
995 max
1050 max
890
1000
1180
1180
WEIGHT
(DRY)
18kg
61kg
44kg
56kg
67kg
67kg
LIST
(EX GST)
$1,930.43
$2,110.87ˆ
$1,069.57
$1,139.13
$1,382.61
$1,330.43
LIST
(EX GST)
$695.65
$84.35
CAT
A
A*
A*
A*
A*
A*
* QUANTITY BUY DISCOUNTS
NOT AVAILABLE ON
THESE PRODUCTS
Warning: Refer to vehicle or tractors
manufacturer’s instructions for
appropriate load, towing and
fitting positions.
CAT
A*
A*
TILT TRAILER
Light duty poly tray, tow behind tilt trailer for ride on mowers
• Rotational moulded poly tray
• Powder coated tubular steel frame
• Tray tilts for easy loading or unloading of contents
• Converts to push along cart with dolly wheel
• Convenient steel handle for easy maneuverability
Pictured: Dolly
wheel in push
along position
TC3080PL
SUPPLIED UNASSEMBLED
CODE
MAX LOAD
TRAY CAPACITY
TRAY LENGTH
TRAY WIDTH
WHEELS
LIST (EX GST)
CAT
TC3080PL
150 kg
175 litre
121cm
92cm
Pneumatic tyres on steel rims
$369.57
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.23
Spreaders
THROW
(METRES)
Up to14
6 to12
6 to12
6 to12
6 to12
6 to12
CODE
Born to Perform
Selecta Loading Ramps
Selecta Loading Ramps
ATV-13: 175KG
EACH
ATV-16: 350KG
LOADING RAMP (SINGLE)
LOADING RAMPS
• Strong aluminium construction
• Strap and rubber coated fingers
help avoid slippage
• Folds in half to make handling
and storage easier
PER PAIR
ATV-03: 450KG
PER PAIR
ATV-10: 625KG
PER PAIR
MEDIUM DUTY RAMPS
ATV RAMPS
• Compact strong aluminium design
• Safety strap and lip to
• Lightweight single piece construction
avoid slippage
Basic Specifications
• Tough, lightweight &
• Max single front or rear
compact design
axle load 200kg
• Folds in half for easy storage
• Min Wheel base 100cm
• Max load height to ground 56cm
Ramps are supplied with bolts to
fit the ramp to tray or deck
• Compact design made from tough
lightweight aluminium
• Curved design increases clearance
• Safety strap and lip to avoid slippage
• Folds in half for easy storage
HEAVY DUTY RAMPS
ATV-11: 1800KG
PER PAIR
• Ideal for mini dingo’s, excavators and skid stears
• Compact design made from tough lightweight aluminium
• Single piece design with carry handle
CODE
DESCRIPTION
LENGTH
WIDTH (EA)
WEIGHT
LIST (EX GST)
CAT
ATV-13
Loading Ramp (Single)
2260mm
230mm
8KG
$199.13
A
ATV-16
Loading Ramps (Pair)
1510mm
215mm
7KG
$189.57
A
ATV-03
ATV/Mower Ramps (Pair)
2260mm
230mm
16KG
$298.26
A
ATV-10
Medium Duty Ramps (Pair)
2260mm
280mm
26KG
$591.30
A
ATV-11
Heavy Duty Ramps (Pair)
2450mm
370mm
32KG
$686.96
A
p.24
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Spray Booms
1.5m spray width
DRAWING
0054
ALGARD 1 METRE BOOM
Now fitted with Air
induction low drift nozzles.
Fitted with three Teejet AIXR nozzles giving a
spray width of 1.5 metres (Code: ALG02)
(AIXR11002-VP coarse to
very coarse droplets)
2m spray width
DRAWING
0053
ALGARD 1 METRE BOOM
Fitted with two LC-15 Anvil deflector nozzles
giving spray width of 2.0 metres (Code: ALG01)
3m spray width
ALGARD 1 METRE BOOM
Fitted with two LC-15 Anvil deflector nozzles
and end nozzle kit giving spray width of 3.0 metres (Code: ALG10)
CODE
NUMBER OF
NOZZLES
BOOM WIDTH
SPRAY
WIDTH
NOZZLE
SPACING
BREAKBACK
FACILITY
MIN BOOM
HEIGHT
FOLDING
POSITION
WEIGHT
(KG)
LIST
(EX GST)
CAT
ALG02
3
1.1 metres
1.5 metres
0.5 metre
No
500mm
None
3kg
$410.43
A
ALG01
2
1.1 metres
2 metres
1 metre
No
1000mm
None
3kg
$384.35
A
ALG10
4
1.36 metres
3 metres
1 metre
No
1000mm
None
4kg
$600.00
A
Stainless steel construction. 1,2 & 3 metre width, non-drip nozzle assemblies,
LC-15 Anvil deflector nozzle. Supplied with connecting hose, on/off tap and
mounting clamps. Note: Boom unclips if obstruction is met.
DRAWING
0058
CODE
NUMBER OF
NOZZLES
BOOM WIDTH
SPRAY WIDTH
NOZZLE
SPACING
BREAKBACK
FACILITY
MIN BOOM
HEIGHT
FOLDING
POSITION
WEIGHT
(KG)
LIST
(EX GST)
CAT
L99-09
2
1.05 metres
2 metres
1 metre
No
1000mm
None
2kg
$211.30
A
L99-08
3
2.05 metres
3 metres
1 metre
No
1000mm
None
2.5kg
$245.22
A
RP1-10
4
3 metres
4 metres
1 metre
No
1000mm
None
3kg
$327.83
A
3 METRE CROSS FOLD BOOM
DRAWING
• Designed for rear carry-all on most ATVs
• Adjustable height and quick and easy fold mechanism
• Non-drip nozzle assemblies and AIXR11002-VP Teejet nozzles
• Mounting brackets supplied
Now fitted with Air
• Stainless steel spraylines
induction low drift nozzles.
0863
(AIXR11002-VP coarse to
very coarse droplets)
CODE
NUMBER OF
NOZZLES
BOOM WIDTH
SPRAY WIDTH
NOZZLE
SPACING
BREAKBACK
FACILITY
MIN BOOM
HEIGHT
FOLDING
POSITION
WEIGHT
(KG)
LIST
(EX GST)
CAT
RP1-25
6
2.6 metres
3 metres
0.5 metre
Yes
500mm
Cross
8.1kg
$869.57
A
4 METRE CROSS FOLD BOOM
DRAWING
• Designed for rear carry-all on most ATVs
• Adjustable height and quick and easy fold boom
• Non-drip nozzle assemblies and AIXR11002-VP Teejet nozzles
• Mounting brackets supplied
• Stainless steel spraylines
0863
CODE
NUMBER OF
NOZZLES
BOOM WIDTH
SPRAY WIDTH
NOZZLE
SPACING
BREAKBACK
FACILITY
MIN BOOM
HEIGHT
FOLDING
POSITION
WEIGHT
(KG)
LIST
(EX GST)
CAT
RP1-26
8
3.6 metres
4 metres
0.5 metre
Yes
500mm
Cross
9.6kg
$982.61
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.25
Spray Booms
1,2 & 3 METRE PAK BOOM
Born to Perform
Spray Booms
6 METRE CROSS FOLD BOOM
Light - medium duty corrosion resistant hot dip galvanised frame. Cross folding,
break back device, 6 metre spray width, s/steel spraylines, non drip nozzle
holders, LC-15 Anvil Deflector nozzles. Ideal for most ATV sprayers.
CODE
NUMBER OF
NOZZLES
BOOM WIDTH SPRAY WIDTH
NOZZLE
SPACING
BREAKBACK
FACILITY
MIN BOOM
HEIGHT
FOLDING
POSITION
WEIGHT
(KG)
LIST
(EX GST)
CAT
L99-04
6
5 metres
1 metre
Yes
1000mm
Cross
20kg
$1,478.26
A
6 metres
FIELD BOOM
Medium duty corrosion resistant hot dip galvanised frame in 6 or 8 metre spraying width. Features break back
device that protects boom if an obstruction is hit. Fully folding arms with stainless steel spraylines and non-drip
nozzle assemblies and Teejet AIXR nozzles. Ideal for linkage or trailer type sprayers.
Now fitted with Air
induction low drift nozzles.
(AIXR11002-VP coarse to
very coarse droplets)
Spray Booms
Pictured: 6 metre HD field boom
HEAVY DUTY FIELD BOOM SPECIFICATIONS
6 metre and 8 metre.
SIZE
Arms and outer wings are formed from one piece of tube steel for increased strength.
CONSTRUCTION
Booms fold horizontally at rear of sprayer. Break back device that protects boom if obstruction is hit.
BOOM ADJUSTMENT
Stainless steel spraylines with 50cm nozzle spacings.
SPRAYLINES
Non-drip nozzle holders, supplied with fan jets and nozzle strainers.
NOZZLES
DESCRIPTION
CODE
LIST (EX GST)
CAT
6 METRE HD FIELD BOOM
8 METRE HD FIELD BOOM
032-06G
$1,582.61
032-08G
$1,895.65
Note: Not all options will fit all models. Extra charges may apply to fitment of some options.
B
B
SHIELDED 2 METRE BOOM
DRAWING
10550
• 2 metre shielded boom section
• Poly shield
• Features 200mm long brush skirt
• Fitted with saddle clamps for mounting to 22mm O.D. pipe
• Half inch spraybar fitted with 4 nozzle holders and air inducted nozzles
CODE
NUMBER OF
NOZZLES
BOOM WIDTH
SPRAY
WIDTH
NOZZLE
SPACING
BREAKBACK
FACILITY
MIN BOOM
HEIGHT
FOLDING
POSITION
WEIGHT
(KG)
LIST
(EX GST)
CAT
032-Q
4
2 metres
2 metres
500mm
No
500mm
None
10kg
$1,373.91
A
p.26
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Spray Booms
UNDER VINER BOOM - DOUBLE SIDED
Now fitted with Air
induction low drift nozzles.
The double sided Under Viner Boom is designed to meet the increasing demand
of farmers, hobby farmers and vineyards. A lightweight, fully height and width
adjustable, double sided boom to suit varying conditions and at the same time
allow for convenient spraying at medium to low volumes along fences, tree
lines, or vine rows providing accurate, economic herbicide application. Fitted
with two G8259140 offset nozzles and two Teejet AIXR nozzles
DRAWING
0865
(AIXR11002-VP coarse to
very coarse droplets)
CODE
NUMBER OF
NOZZLES
BOOM WIDTH
SPRAY WIDTH
BREAKBACK
FACILITY
MIN BOOM
HEIGHT
WEIGHT
(KG)
LIST
(EX GST)
CAT
032-05
2
3.5 - 4.1m
Adjustable
Yes
600 mm
22
$1,400.00
A
SINGLE & DOUBLE SIDED UNDER VINE SHIELDED BOOM
An adjustable shielded boom for spraying along fences, under tree lines and vine rows.
• Boom with telescopic boom width adjustment from 2.1 to 3 metres
• Spring loaded breakaways to protect the boom if an obstacle is struck
• Durable boom shields to minimise spray drift and avoid snagging
CODE
DESCRIPTION
ADJUSTMENT
LIST (EX GST)
CAT
G8292036
Single side under vine boom
1.5 - 1.9 metres
$418.26
A
G8292045
Double side strip boom
3.0 - 3.8 metres
$573.91
A
The Firebreak Boom is adjustable for spray widths ranging from1.5 up
to 5.5 metres coverage. Its dual boom valves allow for individual control
of both its left and right adjustable G8259140 offset nozzles to ensure
effective fence line, verge, rock heap, around the shed, sheep yards or
under tree spraying. Designed to reach the weeds other booms can’t.
Includes brackets for easy fitment to your 4WD ute tray. Zinc plated frame.
Also fitted with three Teejet AIXR nozzles
(AIXR11002-VP coarse to
very coarse droplets)
CODE
NOZZLE SPACING
NOZZLES
BOOM WIDTH
SPRAY WIDTH
BREAKBACK FACILITY
MIN BOOM HEIGHT
WEIGHT (KG)
LIST (EX GST)
CAT
JFB-1
500 mm
5
1.5
1.5 - 5.5
NO
500mm
7
$486.96
A
FENCELINE KIT
DRAWING
Ideal for fenceline work. Mounts on the end of boom
(minimum boom height 500mm), 1/2” BSP Male
connection with nozzle swivel and on/off tap and off
centre jet.
1001
CODE
DESCRIPTION
LIST (EX GST)
CAT
M99-72
Fenceline kit (pair)
$115.65
B
200 LITRE TRUKPAK WITH
BOOMLESS NOZZLE
• All in one tank, pump and boomless nozzle kit
• 200 Litre Polytuff U.V stabilised tank
• 12 volt DC 2088 series Shurflo pump,
11.3 L/min open flow
• 45psi maximum pressure
• Drain plug assembly
• 7.4m spray width (double sided nozzle)
• 3.7m spray width (single sided nozzle)
• PA spraygun and 6 metres of hose included
CODE
DESCRIPTION
OPEN FLOW
PRESSURE
LENGTH
WIDTH
HEIGHT
WEIGHT
(DRY)
LIST
(EX GST)
CAT
TK200-S3B
200 Litre TrukPak with Boomless Nozzle
11.3 L/min
414kPa (45psi)
1050mm
680mm
535mm
18kg
$1,121.74
A
p.27
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.27
Spray Booms
FIREBREAK BOOM
Now fitted with Air
induction low drift nozzles.
Born to Perform
Boomless Nozzle Kits
TPL BOOMLESS NOZZLE
Specifically designed for a 3 point linkage unit running between 30 and
60psi spraying pressure. It can spray up to 10.4 metres wide and is
available with an optional mounting bracket that fits between the upright
bars on Silvan linkage equipment.
Features include:
• Sprays 5.2 metres one side or 10.4 metres both sides together
• Can spray one or both sides with blanking cap included
• Fitted with 2.5 metres of Ag hose
• Sprays up to 18.2 L/min
• Optional mounting bracket attaches
boomless nozzle to Silvan linkage sprayers
*Spray tank not included
4.8 metres
4.8 metres
Boomless Nozzle Kits
9.6 metres
CODE
DESCRIPTION
PRESSURE
L/MIN
(UP TO)
SWATH
WIDTH
M99-76
Boomless Nozzle Kit 2 jet
207KPa/30psi
18,2
M99-77
Boomless Nozzle Kit 2 Jet
207KPa/30psi
18.2
454-282
Optional mounting bracket to fit Silvan linkage units
FC-XT010
Optional boomless nozzles
FC-XT020
Standard in M99-76
FC-XT024
Optional boomless nozzles
207KPa/30psi
207KPa/30psi
7.6
21.8
10.4
6KM/H
123
8KM/H
92
L/HA
12KM/H
62
16KM/H
46
24KM/H
31
10.4
125
109
23
55
37
7.4
93
70
47
35
23
14.4
150
112
75
56
COLOUR
37
LIST
(EX GST)
CAT
$246.09
B
$246.09
A
$54.78
B
$74.78
B
$74.78
B
$81.74
B
ATV BOOMLESS NOZZLE KIT
Eliminate the need for a spraying boom with the durable
boomless nozzle that provides an efficient spray.
• Attaches to your ATV rack and can run off your 12-volt pump, Rakpak
• Can be set for spraying one or both sides depending on the type
of coverage needed and the type of pump used.
• Fitted with 30cm Ag hose for direct fit to Rakpak.
• M99-74(1 Jet) ideal with 361-8000 series Shurflo Pump, 6.8 L/min open flow
• M99-75(2 Jet) ideal with 361-2088 series Shurflo Pump, 11.3 L/min open flow
*Spray tank not included
3.7 metres
3.7 metres
7.4m Full Spray Reach
REFER TO PAGE 17 FOR BOOMLESS NOZZLE KIT
SUITABLE FOR 300 LIGHTFOOT SERIES CODE L99-75
L/HA
CODE
DESCRIPTION
PRESSURE
L/MIN
(UP TO)
SWATH
WIDTH
6KM/H
8KM/H
12KM/H
16KM/H
24KM/H
LIST
(EX GST)
CAT
M99-74
Boomless Nozzle Kit 1 jet
207KPa/30psi
3.8
3.7
93
70
47
35
23
$170.43
B
M99-75
Boomless Nozzle Kit 2 jet
207KPa/30psi
7.6
7.4
93
70
47
35
23
$215.65
B
L99-75
Boomless Nozzle Kit 2 jet for 300
207KPa/30psi
Litre Lightfoot Series
7.6
7.4
93
70
47
35
23
$273.04
B
p.28
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Selecta Power Bare Engines
ELECTRIC
START
9.0 HP BARE ENGINE
6.5 HP BARE ENGINE
The 9.0 Selecta Power engine is
ideal for heavy duty applications.
Features include:
• Lightweight aluminium crankcase
• Bore/stroke 77x58mm
• Output shaft ø 25.4
• ULP petrol
CODE: LBA-109-1
• 6.5 Hp, 4 stroke overhead valve design
ensuring easy starts and reliability
• Lightweight aluminium crankcase
• Bore/stroke 68x54mm
• ULP petrol
CODE: LBA-104
13 HP BARE ENGINE
This rugged Selecta Power engine is used
with larger equipment such as sprayers,
augers, ATV slashers, etc
Features include:
• Lightweight aluminium crankcase
• Bore/stroke 88x64mm
• Output shaft ø 25.0
• Electric start
• ULP petrol
CODE: LBA-110-1
CODE
ENGINE
TYPE
HP
BORE/
STROKE
COMPRESSION
RATIO
MAX
POWER
MAX TORQUE
FUEL
TANK
WEIGHT
(DRY)
LIST
(EX GST)
CAT
LBA-104
4 Stroke
6.5
68x54mm
8.5 : 1
4.8kW @ 3600rpm
11N.m @ 2500rpm
3.6 L
16kg
$395.65
A
LBA-109-1
4 Stroke
9.0
77x58mm
8.2 : 1
5.4kW @ 3600rpm
15.5N.m @ 2500rpm
6.0 L
25kg
$582.61
A
LBA-110-1
4 Stroke
13.0 88x64mm
8.0 : 1
9.5kW @ 3600rpm
23N.m @ 2500rpm
3.6 L
31kg
$791.30
A
QUICK FILL SUCTION KIT
DRAWING
Ideal for quick and convenient filling, this quick fill option allows you to
utilise your alternative water sources such as dams and tanks.
Features include:
0110
• 3-way valve
• 6 metres of quality 38mm I.D. suction hose with foot filter
CODE
SQF-DAMKIT
HOSE I.D.
38mm
Pictured:
180F03019E
HOSE LENGTH
6 metres
CAT
A
Pictured:
JA-1402005
Pictured:
JA-1402012
FIRE FIGHTING HOSE REEL FIRE FIGHTING REEL,
Fitted with adjustable poly nozzle and brackets
HOSE AND NOZZLE
for mounting to top of tank.
ASSEMBLIES
SEE PAGE 94 FOR
MORE INFORMATION.
LIST (EX GST)
$424.35
Complete zinc plated hose reel assembly
ready to bolt on. Tray mountable.
FIRE FIGHTING ZINC
PLATED BARE HOSE REEL
Features include a Zinc plated heavy-duty steel
construction. Holds 36 metres of 19mm hose (not
included) and serviceable brass swivel assembly.
CODE
HOSE
LENGTH
MAX PRESSURE
LIST (EX GST)
CAT
180F03019E
19mm
30 metres
900kPa/131psi
$626.09
A
JA-1402012
19mm
36 metres
1700kPa/247psi
$585.00
A
JA-1402005
19mm
36 metres
1700kPa/247psi
$194.78
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.29
Selecta Power Bare Engines
The high quality 6.5 HP Selecta Power
engine is ideal for a variety
of applications.
Features include:
Born to Perform
Water Transfer Pumps
SELECTA POWER WATER TRANSFER PUMPS
The Selecta Power Water Transfer pumps are designed to handle all kinds of high volume water pumping.
They are ideal for applications where portability is a must or electrical power supply is a problem.
FOUR STROKE COMPACT
WATER PUMP
Water Transfer Pumps
• Portable centrifugal water pump
• Ideal for fire control, watering and washing
• 115 L/min Open Flow
• 40 psi Max. Pressure
• 3 metres Suction Lift
• Outlet and inlet connections 1” BSP (25mm)
• Weighs only 8kg
• Handy carry handle
Motor Features:
• 4 Stroke, 33cc capacity
• Recoil start
• 0.6 Litre fuel tank capacity
• Petrol Powered - No Mixing
Code: LBA-115
DRAWING
DRAWING
5177
5176
2 INCH WATER
TRANSFER PUMP
3 INCH WATER
TRANSFER PUMP
• 6.5Hp engine with oil alert
• Max 460 L/min open flow,
Max 32 psi pressure.
• Supplied with 2 x 2” Nut and Tail
connectors plus suction foot filter
• 2” Inlet, 2” Outlet with maximum
suction lift 3 metres
• 20 metre discharge head
Code: LBA-102
• 6.5Hp engine with oil alert
• Max 800 L/min open flow,
Max 32 psi pressure.
• Supplied with 2 x 3” Nut and Tail
connectors plus suction foot filter
• 3” Inlet, 3” Outlet with maximum
suction lift 3 metres
• 20 metre discharge head
Code: LBA-103
CODE
ENGINE
TYPE
POWER
MAX PRESSURE
KPA/PSI
MAX
OUTPUT
LENGTH
WIDTH
HEIGHT
WEIGHT
(DRY)
LIST
(EX GST)
CAT
LBA-115
4 Stroke
1.21HP
115kPa/40psi
115 L/min
420mm
300mm
360mm
8kg
$486.96
A
LBA-102
4 Stroke
6.5HP
220kPa/32psi
460 L/min
500mm
370mm
460mm
27kg
$660.87
A
LBA-103
4 Stroke
6.5HP
220kPa/32psi
800 L/min
500mm
370mm
480mm
30kg
$695.65
A
186-25A
1” clear wire reinforced suction hose to suit LBA-115 - available per metre
$15.65
C
186-50S
2” clear wire reinforced suction hose to suit LBA-102 - available per metre
$30.43
C
186-75
3” grey PVC suction hose to suit LBA-103 - available per metre
$65.22
C
WASHDOWN GUN
FIRE FIGHTING PISTOL
• Variable trigger from pencil beam to cone spray
• Heavy duty brass body completely covered by plastic
• Brass body covered by a shockproof plastic
housings and fitted with 3 shockproof rings
• Ideal for firefighting or wash down
• Threads 1/2” standard female BSP
• Maximum pressure 24 BAR, maximum output 60 L/min
• Pull trigger to vary flow from cone to straight stream
housings and with 3 shockproof silicone rings
• Viton seals
• 50L/Min max flow
• Max pressure 175psi/1200kpa
• 1/2” BSP Female threaded fitting
• Can be used with a wider range of pumps.
• Ideal for dairy, sheep and horse properties.
SEE PAGE 85 FOR MORE INFORMATION.
CODE
HOSE SIZES UP TO
MAX PRESSURE
410-40
JA-1804090
JA-1804091
25mm I.D.
2400kPa/348psi
3/4” hose adaptor to suit
1” hose adaptor to suit
MAX TEMP
90˚C
LIST
(EX GST)
$176.52
$13.91
$21.74
CAT
C
C
C
CODE
DESCRIPTION
LIST (EX GST)
CAT
410-48
Washdown Gun
$140.42
A
HIGH PRESSURE SUBMERSIBLE PUMP
The 240-volt submersible pump from Selecta can be used for transfering clean water from
any tank and is ideal for above ground and below ground tanks, such as those used for
rain water collection.
Features include:
• 900W 240-volt power rating with a 10m power lead
• 1 + 11/2” outlet size
• Includes floating switch
• Dimensions 360mm x 200mm x 150mm
p.30
CODE
MAX PUMP RATE
MAX HEAD
MAX DEPTH
LIST (EX GST)
CAT
CP900S
5000 L/h
30m
6m
$199.13
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
600 Litre- Trailed Sprayer
An innovative 600 litre trailed sprayer with a variety
of diaphragm pump options direct coupled to a
6.5HP Selecta Power engine. Spray heads are also
optional including the Casotti oscillating sprayer,
booms and boomless nozzles.
Features include:
• Barrel shape poly tank with central sump
• Galvanised chassis
• Tandem axle with large floatation ATV style tyres
• Spring loaded floating draw bar
• Heavy duty mounting plate
• 3 section Geoline manual control valves
DESCRIPTION
PUMP
ENGINE
Bare Tandem Trailer 600 Litre
-
-
J600T-125S
Trailed Tandem 600 Litre Sprayer
BP125 (117 L/min, 20 bar pressure)
6.5 HP Selecta Power
J600T-41S
Trailed Tandem 600 Litre Sprayer
APS41 (39 L/min, 40 bar pressure)
J600T-71S
Trailed Tandem 600 Litre Sprayer
APS41 (67 L/min, 40 bar pressure)
Pictured:
G8394014
Refer to pages 32
CONTROL
LIST (EX GST)
CAT
$3,156.52
A
3 Tap Manual (20 bar)
$5,391.30
A
6.5 HP Selecta Power
3 Tap Manual (30 bar)
$5,095.65
A
9.0 HP Selecta Power
3 Tap Manual (30 bar)
$5,660.87
A
Pictured:
Pictured:
K99-31
K99-36
Refer to pages 32
Pictured:
032-06G
Refer to pages 63-67
CODE
DESCRIPTION
LIST (EX GST)
CAT
180P05010NZ-KN
PA reel 50m x 10mm Varispray
$773.91
A
180P10012NZ-KN
PA reel 100m x 10mm Varispray
$921.74
A
032-06G
Spray boom 6 metre HD manual Fold
$1,582.61
A
032-08G
Spray boom 8 metre HD manual Fold
$1,895.65
A
G8394014
Double foam marker Geoline
$1,052.17
A
K99-31
Econo 14 Litre foam marker
$791.30
A
K99-36
Cassotti Broadcast suitable for APS71 or BP125 pump only
$2,156.52
A
OC20
Boomjet OC20 kit
$547.83
A
OC40
Boomjet OC40 kit
$547.83
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.31
600 Litre- Trailed Sprayer
CODE
J600T
Born to Perform
Foam Markers
Foam Markers
One of the major components of correct spraying is to minimise spray
overlap and spray misses. These problems often occur when there are no
guides as to which areas have or have not been covered. The end result is
lost time by inadvertently covering areas that have already been sprayed
and the unnecessary expense of using excessive chemical, along with its
obvious harmful effects on crops and pastures. At the other end of the
scale, overall spray effectiveness can be lost by missing areas and leaving
patches of unsprayed crop.
Selecta foam markers will help eliminate these costly problems. Simple
and effective, they generate foam to a nozzle dropper leaving a clear
drop of foam on the ground marking where the end of the spray boom
has been. Models offer both left or right side operation and operate from
12V DC supply with an on/off control box. Available in 14 litre, 30 litre
capacity chemical resistant, U.V stabilised polytuff pressure tanks.
DRAWING
0725
14 LITRE FOAM MARKER
The 14 litre 12V DC Economy Foam Marker is ideal for fitment to the front or rear of ATV bikes to enable the operator to have a visual
reference of sprayed areas, eliminating expensive overlapping of chemicals.
Features 12V DC 60W diaphragm compressor with 37L/min. air capacity at 32 KPa (4.6psi ). Remote mounted On/Off control box with
wiring loom, mounting straps, distance marking adjustment valve, 10 metres of quality reinforced delivery hose with single foam
dropper and a 1 litre bottle of marker fluid.
CODE
TANK SIZE
COMPRESSOR
CONTROLS
LENGTH
WIDTH
HEIGHT
WEIGHT (KG)
LIST (EX GST)
CAT
042M
14 litres
12V DC
Electric on/off
570mm
195mm
340mm
12
$773.91
A
K99-31
14 litres Linkage mount
12V DC
Electric on/off
570mm
195mm
340mm
12
$791.30
A
30 LITRE BUBBLER FOAM MARKER
Features a 12 Volt DC 38L/min. air capacity 32 KPa
(4.6psi) diaphragm type compressor mounted to a
solidly constructed galvanised frame which can be
easily affixed to existing equipment. The compressor
feeds air to the foam concentrate mixture held in the
tank causing it to foam and the clear foam is then
forced through the 19mm clear reinforced hose along
the boom to the foam marker dropper bell. Translucent
tanks are calibrated to allow instant sighting of
contents with a large filling mouth and unique design
allowing complete drainage and ease of cleaning.
Supplied with on/off cabin switch and manual 3 way
valve to switch foam delivery from left to right hand
side, 5 litre foam concentrate and 20 metres of hose.
Distance marking
adjustment valve
DRAWING
005
004
Pictured: 042FB
CODE
TANK SIZE
COMPRESSOR
CONTROLS
LENGTH
WIDTH
HEIGHT
WEIGHT (KG)
LIST (EX GST)
CAT
042FB
30 litres
12V DC
manual
340mm
300mm
740mm
35
$1,069.57
A
p.32
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Foam Marker Accessories
DOUBLE FOAM MARKER
• Diaphragm compressor
• High resistant polyethylene tank of 24 litres with flow regulator
• Pre-setted safety valve (0.7 bar) and diaphragm check valve
• Air & liquid polyethylene pipings of 6x4mm with softer
rubber protection hose
• Vertical foam droppers 150mm length with adjustable supports and
diffusers to increase foam volume and life on the ground
• Box with electrical control switch, warning lamp fuse.
• 2 metres of cable with plug, 5 metres connecting cable to the compressor
DESCRIPTION
LIST (EX GST)
CAT
G8394014
Double foam marker with 12 volt electric left and right hand
$1,052.17
A
ONTRACK FOAM
CONCENTRATE
CLEAN SPRAY
Cleans your spray tank, pump and spraylines.
Ideal for boom sprayers, airblast sprayers, turbomisers and 12 volt
sprayers. Clean Spray is a cleansing agent containing a corrosion
inhibitor and is multi-metal compatible. Used in conjunction with
regular flushing, Clean Spray enhances the cleaning process
and protection of key components. Available in 5 litre containers.
Contains ethanolamine
High quality foam marking
concentrate ideal for use in all
foam markers. One 5 litre container
makes 500 litres of high density
foam and provides excellent
visibility and long life on the
ground.
CODE
SIZE
LIST (EX GST)
CAT
CODE
SIZE
LIST (EX GST)
CAT
071-4D
5 litre
$79.13
B
071-6
5 litre
$63.48
B
12 VOLT COMPRESSOR
DRAWING
As used on Selecta foam markers. 12 volt DC diaphragm design, ideal for high volume,
low pressure foam making application.
5003
CODE
AIR CAPACITY
POWER
OUTLET
LENGTH
WIDTH
HEIGHT
LIST (EX GST)
CAT
042C-6
37 L/min @ 32kpa/4.6psi
60W
1/8” BSP thread
200mm
110mm
140mm
$190.43
B
12 VOLT HEAVY DUTY COMPRESSOR
DRAWING
0046
As used on Selecta foam markers. Heavy duty 12 volt DC diaphragm design, ideal for high volume,
low pressure foam making application.
CODE
AIR CAPACITY
POWER
OUTLET
LENGTH
WIDTH
HEIGHT
LIST (EX GST)
CAT
042D-45201
38 L/min @ 32kpa/4.6psi
96W
1/4” BSP thread
200mm
140mm
170mm
$302.61
A
12 VOLT HI-VOLUME COMPRESSOR
This quality compressor is made in the U.S.A. with internal cooling fan, sealed bearings, 1/4” air ports and will pump 42.5L/min of air.
CODE
AIR CAPACITY
POWER
OUTLET
LENGTH
WIDTH
HEIGHT
LIST (EX GST)
CAT
JA-2401007
42.5 L/min @ 34.5kpa/5psi
130W
1/4” BSP thread
199mm
121mm
149mm
$591.30
A
FOAM MARKER BELL
Suitable for 3/4” hose connection.
CODE
DESCRIPTION
LIST (EX GST)
CAT
430-005
Foam marker bell
$59.13
B
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.33
Foam Marker Accessories
CODE
Born to Perform
Fire Fighting Units
SELECTA POWER FIRE FIGHTING PUMP
The Selecta Power pump/engine unit is ideal for fire fighting and watering, and comes
standard with a carry/mounting frame for increased mobility and added protection.
• 4 -stroke over head cam engine with oil alert
• Max 250L/min open flow, Max 100psi pressure
• Direct coupled centrifugal, twin impeller fire fighting pump
• Maximum suction lift 3.5 metres
• 1 x 11/2” inlet, 2 x 1” outlet, 1 x 11/2” outlet
• Optional hose kit (Code: LBA-100A) consisting of 20m fire
fighting hose, nozzle, 6m suction hose and foot filter
Performance Curve
M
DATA REFERS TO CLEAN WATER
120
100
80
DRAWING
60
5070
40
20
0
Fire Fighting Units
Optional LBA-100A hose kit
L/Min 50
100
150
200 250
300
350 400
Continuous - recommended maximum for service duty
CODE
ENGINE TYPE
HP
MAX PRESSURE KPA/PSI
MAX OUTPUT
LENGTH
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
LBA-100
Selecta Power
6.5
690kPa/100psi
250 L/min
500mm
370mm
400mm
31kg
$660.87
A
OPTION CODE
DESCRIPTION
SUCTION HOSE
DELIVERY HOSE
LIST (EX GST)
CAT
LBA-100A
Water transfer hose kit
6m x 40mm ID with foot filter
20m x 19mm ID with adjustable nozzle
$290.43
A
328-254-28
Seal kit - Mechanical
$33.04
B
SELECTA POWER 400 LITRE
FIRE FIGHTING UNIT
Pictured: SQF400S
The Selecta Power fire fighting units are high quality, affordable units
that will fit neatly across the back of your 1 tonne tray, and also fits
between the wheel arches of popular utilities.
Standard features include:
• 6.5HP Selecta Power fire fighting engine with high pressure,
twin impeller fire fighting pump
• 20m hose and fire fighting nozzle
• Unique baffle design to reduce surge
when travelling
• Screw on lid with breather
• Calibrated sight lines
• OPTIONAL QUICK FILL SUCTION KIT. SEE PAGE 29
CODE
ENGINE TYPE
MAX PRESSURE KPA/PSI
MAX OUTPUT
REEL
LENGTH
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
SQF400S
Selecta Power
690kPa/100psi
250 L/min
Optional
1060mm
930mm
670mm
65kg
$1,834.78
A
QUALITY
EUROPEAN
BEACONS
12 VOLT ROTATING BEACONS
These rotating beacons are ideal for all types
of vehicles and moving machinery.
Pictured:
Flat Base
Pictured:
Magnetic Base
Pictured:
Rod Base
CODE
DESCRIPTION
FIXING
COLOUR
LIST (EX GST)
CAT
GF15011
Flat Base Beacon
Permanent
Amber
$81.74
B
GF35011
Rod Base Beacon
Permanent
Amber
$94.78
B
GF25011
Magnetic Base Beacon
Temporary
Amber
$94.78
B
GF15210
Spare Orange Cover
-
Amber
$18.26
B
GF50310/1
Spare Globe
$14.78
B
p.34
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Fire Fighting Units
1000 LITRE FIRE FIGHTING SLED WITH SELECTA
POWER ENGINE & HOSE REEL
1100L Freestanding tank made from thick polytuff U.V stabilised polyethylene
with large breather lid and strainer basket.
• Max output 250 L/min open flow
Honda/Davey pump
• Max Pressure 100 psi
configurations
• Max Head 60 metres
also available
• Suction lift height 3.5 metres
• Impeller Twin - Alloy
Fire Fighting reel, hose
and nozzle assembly
1000 Litre bare tank
Code: JA-1402012
Code: 430-1000U
Update your existing firefighting unit
with our huge range of Selecta bare
tanks, pumps and accessories.
Selecta Power pump
Long Skid
Code: LBA-100
Code: 430-114
CODE
DESCRIPTION
LENGTH
WIDTH
HEIGHT
WEIGHT
(DRY)
LIST
(EX GST)
CAT
SLF1000S-1
1000 litre Selecta Power Fire fighting unit
1970mm
1160mm
1050mm
135Kg
$4,487.81
A
SLF1000D-1
1000 litre Honda/Davey Fire fighting unit
1970mm
1160mm
1050mm
135Kg
$7,566.80
A
HONDA / DAVEY 800 LITRE FIRE FIGHTING UNITS
These motorised fire fighting units feature the Davey Fire
Fighting pump 425L/min open flow (580kPa / 80psi) powered by
the GX160 5.5HP Honda engine. Other features include:
* SINGLE AND TWIN BAFFLED
• Baffled design to reduce surge when travelling
• Fits neatly in 1 tonne trays
• Screw down lid with breather
• Calibrated sight line
• The Lo Pro designed 800 litre unit is only available with
the hose reel with 30 metres ¾” fire fighting hose
with poly fire fighting nozzle
Pictured: SQF800N
BAFFLED TANK
BAFFLED TANK
CODE
CAPACITY
PUMP TYPE
WEIGHT (DRY)
HOSE & GUN
REEL
LIST (EX GST)
CAT
SQF800N
800 Litre
Davey Pump/Honda GX160 motor
96kg
Poly Fire nozzle & 30m 3/4” hose
F/Fighting
$3,800.00
A
BAFFLED TANK
CODE
OPTION DESCRIPTIONS
LIST (EX GST)
CAT
180F03019E
Fire fighting hosereel with 30 metres of hose (see page 85)
$626.09
A
SQF-DAMKIT
Quick fill dam kit
$424.35
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.35
Fire Fighting Units
Frame:
Steel Sled frame with fork lifting tracks is pin
and bolt mounted to the base of the tanks
specially moulded feet.
Pump:
• 4 stroke 6.5 HP Selecta Power Engine
• 6.5 H.P. Single Cylinder 196cc
• Manual recoil rope start
• Max power 4.8kW at 4000rpm
• Low oil protection fitted
Hose Reel:
• 36m of 19mm I.D. delivery hose
• Fire fighting nozzle with adjustable spray from straight to conical pattern
• Reel can be locked into place with a chain clip to prevent unintended hose unwind and damage
Born to Perform
Dieselpro Diesel Transfer Units
Dieselpro Diesel Transfer Units
Diesel Pro
The Dieselpro diesel transfer units are available in 200, 400 and 600
litre capacities. The tanks are manufactured with a unique diesel
grade polyethylene that is UV Stabilised and Impact resistant. The
colour grey denotes diesel. Our heavy duty reliable 12 volt pumps are
from Italy, made by Piusi, a world class pump manufacturer.
IMPACT RESISTANT UV
STABILISED DIESEL GRADE
POLYTUFF TANK
STRONG LOCKABLE POLY LID
4 METRE WIRING HARNESS
WITH ALLIGATOR CLIPS
45 L/MIN PIUSI 12 VOLT
DIESEL PUMP
LOCKABLE FILLING CAP
5 METRE 3/4” DELIVERY HOSE
WITH AUTO SHUT OFF TRIGGER
AND PADLOCK FACILITY
OPTIONAL DIESEL METER KIT
4X8MM BRASS INSERTS FOR
TRAY MOUNTING (200 LITRE
UNIT ONLY)
INTERNAL FOOT FILTER ON
SUCTION HOSE
Pictured:
400 Low profile unit SQDN400L-X1
p.36
Pictured:
600 Low profile unit SQDN600L-X1
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Dieselpro Units
Diesel Pro
Pictured: SQDN400L-X1
200 LITRE DIESELPRO
• UV Stabilised diesel grade polyethylene
Polytuff Tank
• 12 volt BP3000 Piusi self priming pump
• 45 L/min open flow
• Strong double walled pump cover protects the
pump and tank breather from unwanted access
• Padlockable pump cover
• Lockable filling cap
• High quality auto-shut off trigger that mounts
at the front of the tank and has a provision to
padlock it
• 5mtr of ¾” delivery hose with swivel
and crimped fittings
• 4 metre wiring harness with alligator clips
• Anti static earth strap
• 8 mm brass Inserts to mount unit to a tray
• Suction foot screen filter on internal suction line
• 30 min duty cycle, 30 min on/off
Pictured: SQDN600L-X1
400 LITRE DIESELPRO
• UV Stabilised Diesel grade polyethylene
Polytuff Tank
• 12 volt BP3000 Piusi self priming pump
• 45 L/min open flow
• Strong Double walled pump cover protects the
pump and tank breather from unwanted access
• Padlockable Pump cover
• Lockable filling cap
• High quality auto-shut off trigger
that mounts at the front of the tank and
has a provision to padlock it
• 5 metre of ¾” delivery hose with swivel
and crimped fittings
• 4 metre wiring harness with alligator clips
• Anti static earth strap
BAFFLED TANK
• Suction foot screen filter on internal suction line
• 30 min duty cycle,
30 min on/off
600 LITRE DIESELPRO
• UV Stabilised diesel grade polyethylene
Polytuff Tank
• 12 volt BP3000 Piusi self priming pump
• 45 L/min open flow
• Strong double walled pump cover protects the
pump and tank breather from unwanted access
• Padlockable pump cover
• Lockable filling cap
• High quality auto-shut off trigger that mounts at the
front of the tank and has a provision to padlock it.
• 5 metre of ¾” delivery hose with swivel and
crimped fittings
• 4 metre wiring harness with alligator clips
• Anti static earth Strap
• Suction foot screen filter on internal suction line
BAFFLED TANK
• 30 min duty cycle,
30 min on/off
BAFFLED TANK
CODE
DESCRIPTION
LOCKABLE LID
INSERTS
Diesel Units
Pictured: SQDN200L-X1
BAFFLED TANK
OPEN FLOW
LENGTH
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
1100mm
A
SQDN200L-X1
200Ltr Dieselpro
YES
YES
45L/min
640mm
610mm
26kg
$1,349.00
SQDN400L-X1
400Ltr Dieselpro
YES
NO
45L/min BAFFLED
1700mmTANK
820mm
590mm
37kg
$1,545.15 TANK
A
BAFFLED
SQDN600L-X1
600Ltr Dieselpro
YES
YES
45L/min
810mm
40kg
$1,994.23
A
PF11-X2
Optional electronic diesel meter– note customer fitment
$428.13
A
1664mm
840mm
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.37
300 Litre DieselSteel Transfer Unit
300 Litre DieselSteel Transfer Unit
Diesel Steel
45L/MIN 12 VOLT DIESEL PUMP
Born to Perform
• Baffled steel tank to reduce fluid surge and
improve handling in transport
• Designed to meet Australian Standards AS 1692 “Steel tanks for
flammable and combustible liquids”
• Heavy duty lifting points that can be used as tie down points also.
• 12 volt BP3000 Piusi self priming pump
• 45 L/min open flow
• Lockable filing cap to prevent diesel theft
• High quality auto shut-off trigger that mounts on the top of the tank
and has a provision to padlock it.
• 5 metre of ¾” delivery hose with swivel and crimped fittings
• 4 metre wiring harness with alligator clips
• 30 min duty cycle, 30 min on/off
LIFTING AND TIE DOWN POINTS
4 METRE WIRING HARNESS
WITH ALLIGATOR CLIPS
OPTIONAL ELECTRONIC LITRE
COUNTER (PF11)
5 METRE 3/4” DELIVERY HOSE
WITH AUTO SHUT OFF TRIGGER
LOCKABLE FILLING CAP
STEEL TANK MADE TO MEET
AUSTRALIAN STANDARDS
AS1692
BAFFLED TANK
BAFFLED TANK
CODE
DESCRIPTION
LOCKABLE CAP
OPEN FLOW
LENGTH
SQDS300-X1
300 Ltr DieselSteel
YES
45L/min
1000mm
PF11
Electronic Litre Counter
p.38
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
600mm
690mm
45Kg
$2,969.44
A
$357.39
A
BAFFLED TANK
300 Litre Diesel HD Transfer Units
Diesel
17 LITRE ADBLUE™ TANK
STRONG LOCKABLE POLY LID
IMPACT RESISTANT UV
STABILISED DIESEL GRADE
POLYTUFF TANK
300 Litre Diesel HD Transfer Units
45 L/MIN PIUSI 12 VOLT
DIESEL PUMP
4 METRE WIRING HARNESS
WITH ALLIGATOR CLIPS
5 METRE 3/4” DELIVERY HOSE
WITH AUTO SHUT OFF TRIGGER
AND PADLOCK FACILITY
BAFFLED TANK
BAFFLED TANK
BAFFLED TANK
ANTI STATIC EARTH STRAP
LOCKABLE LID
DESIGNED FOR EASY STRAPPING
ALLOWANCE TO SAFELY STORE
12 VOLT CLIPS
LOCKABLE FILLING CAP
CODE
DESCRIPTION
LOCKABLE LID
OPEN FLOW
LENGTH
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
SQDH300-X1
300 Ltr DieselHD
YES
45L/min
1070
780
720
32Kg
$1,391.30
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.39
200, 300, 400 Litre Dieselpak Units Born to Perform
The rugged Selecta 12 volt Dieselpak transfer
units are available from 200 to 2200ltr
capacity. The tanks are manufactured with a
unique diesel grade polyethylene that is UV
Stabilised and Impact resistant. Grey colour
denoting Diesel. Our heavy duty reliable 12 volt
pumps are from Italy, made by Piusi, a world
class pump manufacturer.
Diesel Pak
200, 300, 400 Litre Dieselpak Units
IMPACT RESISTANT UV
STABILISED DIESEL GRADE
POLYTUFF TANK
INTERNAL FOOT FILTER ON
SUCTION HOSE
4 METRE WIRING HARNESS
WITH ALLIGATOR CLIPS
45L/MIN 12 VOLT DIESEL PUMP
5 METRE 3/4” DELIVERY HOSE
WITH AUTO SHUT OFF TRIGGER
* Replacement Pump re order code is F0022325A
CODE
DESCRIPTION
OPEN FLOW
LENGTH
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
TKD200-X1
200 Litre tank with BP3000 12 volt pump
45L/min
1030mm
580mm
535mm
21kg
$1,173.91ˆ
A
INTERNAL FOOT FILTER ON
SUCTION HOSE
OPTIONAL 10MTR RETRACTABLE
REEL KIT AVAILABLE (PF16)
BAFFLED TANK
Pictured:
SQD300-X1
4 METRE WIRING HARNESS
WITH ALLIGATOR CLIPS
BAFFLED TANK
Pictured:
SQD400-X1
45L/MIN 12 VOLT DIESEL PUMP
IMPACT RESISTANT UV
STABILISED DIESEL GRADE
POLYTUFF TANK
5 METRE 3/4” DELIVERY HOSE
BAFFLED TANK
WITH AUTO SHUT OFF TRIGGER
* Replacement Pump re order code is F0022325A
CODE
DESCRIPTION
OPEN FLOW
LENGTH
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
SQD300-X1
300 Litre tank with BP3000
45L/min
1060mm
900mm
530mm
30kg
$1,530.43
A
SQD300-X2
300 Litre tank with BP3000 & litre counter
45L/min
1060mm
900mm
590mm
32kg
$1,852.17
A
SQD400-X1
400 Litre tank with BP3000
45L/min
1060mm
900mm
650mm
34kg
$1,486.96
A
SQD400-X2
400 Litre tank with BP3000 & litre counter
45L/min
1060mm
900mm
770mm
36kg
$1,965.22
A
PF16
10 metre retractable hose reel 1”
550mm
250mm
530mm
28kg
$1,363.43
A
p.40
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
ˆ INDENT ORDER
800 Litre Dieselpak Units
Diesel Pak
Pictured: SQD800-X1
IMPACT RESISTANT UV
STABILISED DIESEL GRADE
POLYTUFF TANK
BP3000 PUMP 45L/MIN, 12 VOLT
4 METRE WIRING HARNESS
WITH ALLIGATOR CLIPS
5 METRE 3/4” DELIVERY HOSE
WITH AUTO SHUT OFF TRIGGER
BAFFLED TANK
OPTIONAL PUMPS
12 VOLT - 45L/MIN PUMP FOR SQD800-X1 OR X2 UNITS
BAFFLED
TANK PUMP FOR SQD800-6 UNIT
12 VOLT - 80L/MIN
12/24 VOLT - PUMP FOR SQD800-3 OR 4 UNITS
TWIN BAFFLES
MOUNTING PLATE NOW STANDARD
WITH ALL 800 LITRE DIESEL UNITS
Pictured: SQD800-X2
CODE
DESCRIPTION
SQD800-X1
SQD800-X2
SQD800-3
SQD800-4
SQD800-6
PF16
800 Litre tank with BP3000 12 volt pump
800 Litre tank with BP3000 12 volt pump & litre counter
800 Litre tank with dual voltage diesel pump
800 Litre tank with dual voltage diesel pump & litre counter
800 Litre tank with Hi-flow pump & litre counter
10 metre retractable hose reel 1”
ˆ INDENT ORDER
Pictured: SQD800-4
Pictured: SQD800-3
OPEN
FLOW
45L/min
45L/min
45L/min
35/75L/min
80L/min
Pictured: SQD800-6
LENGTH
WIDTH
HEIGHT
HOSE
LENGTH
1800mm
1800mm
1800mm
1800mm
1800mm
550mm
940mm
940mm
940mm
940mm
940mm
250mm
760mm
760mm
760mm
760mm
760mm
530mm
5m
5m
5m
5m
5m
10m
WEIGHT LIST
(DRY)
(EX GST)
CAT
64Kg
66Kg
69Kg
70Kg
84Kg
28kg
A
A
A
A
A
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
$2,182.61
$2,304.35
$2,904.35
$3,095.65
$3,026.09
$1,363.43
p.41
800 Litre Dieselpak Units
OPTIONAL 10MTR RETRACTABLE
REEL KIT AVAILABLE (PF16)
BAFFLED TANK
Born to Perform
1000 Litre Dieselpak Units
OPTIONAL 8MTR OR 10MTR
RETRACTABLE REELS AVAILABLE
The tanks are manufactured with a unique diesel grade polyethylene
that is UV Stabilised and impact resistant. Grey colour denoting Diesel.
Our heavy duty reliable 12 volt pumps are from Italy, made by Piusi, a
world class pump manufacturer.
1000 Litre Dieselpak Units
IMPACT RESISTANT UV
STABILISED DIESEL GRADE
POLYTUFF TANK
BP3000 PUMP WITH 5 METRE
3/4” DELIVERY HOSE WITH
AUTO SHUT OFF TRIGGER
4 MOUNTING POINTS, OPTIONAL
MOUNTING BRACKETS
Pictured: SQD1000-X1
Pictured: 1000 litre unit with
optional litre counter and
short frame
OPTIONAL PUMPS
12 VOLT - 45L/MIN PUMP FOR SQD1000-X1 OR X2 UNITS
12 VOLT - 80L/MIN PUMP FOR SQD1000-6 UNIT
12/24 VOLT - PUMP FOR SQD1000-3 OR 4 UNITS
MOUNTING PLATE NOW STANDARD
WITH ALL 1000 LITRE DIESEL UNITS
Pictured: SQD1000-4
Pictured: SQD1000-6
CODE
DESCRIPTION
OPEN
FLOW
LENGTH
WIDTH
HEIGHT
WEIGHT
(DRY)
LIST
(EX GST)
CAT
SQD1000-X1
1000 Litre tank with BP3000 12 volt pump
45L/min
1500mm
1180mm
1000mm
54kg
$2,095.65
A
SQD1000-X2
1000 Litre tank with BP3000 12 volt pump & litre counter
45L/min
1500mm
1180mm
1070mm
56kg
$2,695.65
A
SQD1000-3
1000 Litre tank with dual voltage diesel pump
35/75L/min
1500mm
1180mm
1000mm
59kg
$2,773.33
A
SQD1000-4
1000 Litre tank with dual voltage diesel pump & litre counter
35/75L/min
1500mm
1180mm
1070mm
61kg
$2,965.22ˆ
A
SQD1000-6
1000 Litre tank with Hi-flow pump & litre counter
80L/min
1500mm
1180mm
1090mm
66kg
$3,086.96
A
F00750090
Retractable hosereel complete with 8mtr of ¾” hose (fits on long frame code 430-114)
$1,102.29
A
F00750030
Retractable hosereel complete with 10mtr 1” hose (fits on long frame code 430-114)
$1,063.91
A
For more information on hosereels refer to page 49
430-113
Short Frame
$582.61
A
430-114
Long Frame
$765.22
A
p.42
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
ˆ INDENT ORDER
2200 Litre Dieselpak Transfer Units
Diesel Pak
ELECTRONIC LITRE COUNTER
STANDARD ON ALL 2200 LITRE
MODELS (PF11)
2200 Litre Dieselpak Transfer Units
HI FLOW 12 VOLT 80L/MIN
PUMP 30 MIN DUTY
4MTR WIRING HARNESS WITH
ALLIGATOR CLIPS
INTERNAL FOOT FILTER ON
SUCTION HOSE
4M 1” DELIVERY HOSE AND
AUTO SHUT OFF TRIGGER
IMPACT RESISTANT UV
STABILISED DIESEL GRADE
POLYTUFF TANKS
Pictured: SQD2200-6
4 MOUNTING POINTS
OPTIONAL PUMPS
12 VOLT - 80L/MIN PUMP FOR SQD2200-6 UNIT
12/24 VOLT - 35/75L/MIN PUMP FOR SQD2200-4 UNIT
240 VOLT - 56L/MIN PUMP FOR SQD2200-8 UNIT
12/24 DUAL VOLTAGE PUMP
30 MIN DUTY CYCLE
240VOLT CONTINUOUS
DUTY PUMP
Pictured: SQD2200-4
CODE
SQD2200-4
SQD2200-6
SQD2200-8
ˆ INDENT ORDER
Pictured: SQD2200-8
DESCRIPTION
AMP DRAWAGE
LENGTH
mm
WIDTH
mm
HEIGHT
mm
WEIGHT
(DRY)
LIST
(EX GST)
CAT
2,200 litre 12-24 volt Piusi
diesel pump (F00341160) and meter
2,200 litre 12 volt Hi flow Piusi
diesel pump (F0036302A) and meter
2,200 litre 240 volt Piusi diesel vane
pump (F0073022A) and meter
24 volt 25 amps
12 volt 16 amps
1900
1380
1150
92kg
$4,022.17
A
12 volt 35 amps
1900
1380
1150
95kg
$3,200.00ˆ
A
230 volt 3 amps
1900
1380
1150
92kg
$3,553.28ˆ
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.43
50, 100, 200 Litre Dieselpower Transfer Units
50, 100, 200 Litre Dieselpower Transfer Units
Born to Perform
The rugged Selecta 12 volt Dieselpower transfer units are available from 50 to 200ltr
capacity. Tanks are made from a unique Diesel grade Polyethylene that are Impact resistant
and UV Stabilised. Grey colour denoting Diesel. Proven and reliable Selecta Diesel Power
pumps are the heart of this rugged product.
Diesel Power
50 LITRE DIESELPOWER
TRANSFER UNIT
IMPACT RESISTANT UV
STABILISED DIESEL GRADE
POLYTUFF TANK
4 METRES 1/2 DELIVERY HOSE
MANUAL SHUT OFF TRIGGER
ON/OFF SWITCH
MOUNTED ON PUMP
14L/MIN 12 VOLT
DIESEL PUMP
CODE
DESCRIPTION
OPEN FLOW
SQD50-1
50Ltr Diesel Power Diesel Tank
14L/min
• Dieselgrade UV Stabilised Polyethylene
Polytuff tank
• 12 volt high quality pump with
14L/min capacity open flow
• Power cord 3m long with alligator clips
• Control On-Off switch mounted at the pump
(Can run dry without damage)
• 4m of ½”delivery hose
• Manual shut off gun (with lock-on trigger)
• Suction foot screen filter on internal suction line
• Delivery hose coils around the tank and
clips into place with 2 rubberised straps
LENGTH
WIDTH
HEIGHT
700mm
400mm
300mm
WEIGHT (DRY)
LIST (EX GST)
CAT
$405.20
A
IMPACT RESISTANT UV
STABILISED DIESEL GRADE
POLYTUFF TANKS
40 L/MIN 12 VOLT
DIESEL PUMP
4MTRS 3/4” DELIVERY HOSE
AND AUTO SHUT OFF TRIGGER
TRIGGER HOLDER WITH
PADLOCK FACILITY
4 METRES WIRING HARNESS
WITH ALLIGATOR CLIPS
200 LITRE
DIESEL POWER
Diesel Power
• UV Stabilised Diesel grade
polyethylene Polytuff Tank
• 12 volt Diesel Power self priming pump
• 40 L/Min open flow
• High quality auto shut off trigger that mounts at the front of the tank
and has a provision to padlock it.
• 4mtr of ¾” delivery hose with swivel and crimped fittings
• 4 mtr wiring harness with alligator clips
• Suction foot screen filter on internal suction line
• Safety bottom fill drop tube
• 30 min duty cycle, 30 min on/off
CODE
DESCRIPTION
OPEN FLOW
LENGTH
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
SQDN100-1
100 Litre DieselPower
40L/min
800mm
620mm
440mm
18kg
$886.96
A
SQDN200-7
200 Litre DieselPower
40L/min
1100mm
640mm
550mm
24kg
$947.83
A
100 LITRE DIESELPOWER
• PUMP: 12-volt 40L/min open flow diesel transfer pump
• Gun holder on tank face with provision for padlock
• Internal foot filter on suction hose.
WARNING - Refer to vehicle or tractor manufacturer’s instructions for appropriate load and towing limits and fitting positions. Never fill the tank capacity to exceed
the vehicle or tractor manufacturer’s specified safe load carrying capacities. Note: 1 litre of water = 1kg
p.44
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Diesel Transfer Accessories
12-VOLT DIESEL BP3000
12-VOLT DIESEL POWER PUMP
• 45 L/min open flow
• 12-volt DC / 265 watt / 22 amp pump
• Comes with 2 x 19mm
• 4 metre battery cable with alligator clips
• Self primimg vane pump
• Max. head 10 metres
• 30 minute duty cycle
• 40 L/min open flow
• 3/4” female BSP inlet/outlet
• 4 metre battery cable with alligator clips
• Self primimg vane pump
• Max. head 10 metres
• 30 minute duty cycle
• 4 metre battery cable
Features include:
Features include:
PUMP
DESCRIPTION
LIST (EX GST)
CAT
F0022325A
BP3000 Bare Pump
$399.13
A
382-009
12-Volt Diesel Power Pump
$194.78
A
Diesel Transfer Accessories
CODE
12 VOLT HI FLOW DIESEL PUMP
Features include:
• 12 volt DC/35 amp
• 85 L/min open flow Piusi pump
• 1” BSP female ports
• Supplied with 4m of battery cable and alligator clips
• L 350mm, W 190mm, H 280mm, Weight (dry) 14.4kg
• Replacement pump for for 800 & 1000 litre diesel capacity units
CODE
DESCRIPTION
LIST (EX GST)
CAT
F0036302A
12 volt Hi Flow Piusi diesel pump
$660.87
A
12/24 VOLT PANTHER DIESEL PUMP
Features include:
• Dual voltage 12/24-volt DC 150/420 watt 16/25 amp Puisi pump
• Easy to use volumetric self priming
• 1” BSP female ports
CODE
AMP DRAWAGE
LIST (EX GST)
CAT
F00341160
Dual voltage 12/24-volt DC 150/420 watt 16/25 amp Piusi pump
$1,000.00
A
240V (AC) DIESEL TRANSFER PUMP
• 240 volt diesel vane Piusi pump
• Rated for continuous running
• Open flow capacity 56 L/min
• Includes internal bypass (3 min max)
• Max suction (Head) 10 meters
• Self Priming
• Amp drawage 240 volt 3amps
• 1” female ports
• 2 metre power lead
CODE
AMP DRAWAGE
LENGTH MM
WIDTH MM
HEIGHT MM
WEIGHT (DRY)
LIST (EX GST)
CAT
F0073022A
230 volt 3 amps
225
150
170
7.4kg
$393.91
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.45
Diesel Transfer Accessories
Born to Perform
12 VOLT DIESELPOWER PUMP KIT
• 4 metre battery cable with alligator clips
• 3/4” BSP female ports
• 4 metres of 20mm I.D. delivery hose
• Aluminium manual shut off gun
• 40 L/min open flow
• 4.2 Kg weight
• Protective metal case around pump
• 8 metre discharge head
• 30 minute duty cycle
PUMP
CODE
DESCRIPTION
LIST (EX GST)
CAT
PF09
12-volt DieselPower kit with manual gun
$313.04
A
Diesel Transfer Accessories
SELECTA DIESELPOWER 12 VOLT PUMP KIT
• High quality automatic shut off gun
• 40L/min (Open flow)
• 4 mtrs of 19mm I.D diesel delivery hose
• Suction foot screen filter
PUMP
• Hose Swivel
• 30 min duty cycle, 30 min on/off
• Fitted with an internal bypass that opens under 1.5 Bar of back pressure that can operate for up to
3 minutes, to allow time for pump to be safely turned off
CODE
DESCRIPTION
LIST (EX GST)
CAT
PF15
Selecta DieselPower 12 volt pump kit
$330.43
A
12-VOLT BP3000 BYPASS KITS
Pictured:
• Available with manual or auto-shut off gun
• 45L/min (Open flow) Piusi pump
• 4 mtrs of 19mm I.D diesel delivery hose
• Suction foot screen filter
• 3x Straight ¾” hose tails
• Hose Swivel
• 30 min duty cycle, 30 min on/off
• Fitted with an internal bypass that opens under 1.5 Bar of back pressure that
can operate for up to 3 minutes, to allow time for pump to be safely turned off
BP3000 Bypass kit
& manual gun
(F0022500C)
CODE
DESCRIPTION
OPEN FLOW
LIST (EX GST)
CAT
F0022500C
BP3000 Piusi Bypass kit & manual gun
45L /min
$530.43
A
F0022511C
BP3000 Piusi Bypass kit & auto-shut off gun
45L /min
$617.39
A
12-VOLT HI-FLOW DIESEL 2000 KIT
• 85L/min open flow Piusi pump
•12-volt DC/35 amp pump
• 4 metres battery cable with alligator clips
• Easy to use volumetric self priming
• 1” BSP female ports
• 4 metres of 1” I.D. diesel delivery hose
• Auto shut-off gun with hose swivel
• 30 minute duty cycle
CODE
DESCRIPTION
LIST (EX GST)
CAT
PF363260
Hi flow Piusi diesel pump kit
$1,034.78
A
12/24 VOLT PANTHER DIESEL 2000 KIT
• Dual voltage 12/24-volt DC
150/420 watt 16/25 amp Piusi pump
• 4 metres battery cable with alligator clips
• Easy to use volumetric self priming
• Trigger filling nozzle with hose swivel
• 1” BSP female ports
• 4 metres of 20mm I.D. diesel delivery hose
• 24-volt - 75L/min open flow
• 12-volt - 35L/min open flow
• Carry handle
• Auto shut-off gun with hose swivel
• 30 minute duty cycle
CODE
DESCRIPTION
LIST (EX GST)
CAT
PF341090
12/24-volt Piusi diesel kit
$1,130.43
A
p.46
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Diesel Transfer Accessories
MULTIOIL SERIES
The Flotec MultiOil pump system is ideal for all applications where diesel fuel
or heating oil needs to be transferred. At 35L/min it provides an excellent
alternative to hand wind pumping, at great value for money.
• Totally enclosed fan-cooled motor
• 550 watts input power
• 4m max. head
• 35 L/min max. flow rate
• Level of protection IPX4
• Cast iron pump casing, AISI 416 stainless steel shaft, brass impeller
• Pump inlet and outlet ports are 25 mm diameter
• Ideal for Diesel fuel and heating oil
• Includes 4 m suction hose and 2 m discharge hose, fuel pistol, brass foot valve and filter
• Suitable for agricultural, industrial and domestic use
CODE
DESCRIPTION
LIST (EX GST)
CAT
N4162030F
240 volt Flotec MultiOil pump system
$370.43
A
Diesel Transfer Accessories
12 VOLT PIUSIBOX BASIC DIESEL PUMP KIT
420mm
• 45L/min (open flow)
Weight: 9.5 Kg
• 4 metre delivery hose
• 4 metre wiring loom with alligator clips
• Duty cycle 30 mins on/ 30 mins off
• Vantage valve suction filter with tap
• The containers main purpose is to keep clean
the suction hose and filter. A good example is
the suction hose may gather dust or dirt.
Clip lock latches
300
m
400m
mm
Vantage Valve Suction
foot filter with tap
CODE
DESCRIPTION
LIST (EX GST)
CAT
F00231000
12 Volt Piusibox Basic Diesel pump kit
$709.67
A
DIESEL BAFFLING FOAM
VACUUM OIL
EXTRACTOR
Diesel Baffle Foam prevents liquid surge during transport. It is a simple to
install Diesel compatible foam baffle that requires no assembly.
• Hand Operated.
• Holds up to 9 ltrs
• Lightweight & Portable
• Removes oil from vehicles, boats,
diffs, lawnmowers and motor
bikes without draining
• Sucks and stores extracted liquids
• Float valve to prevent overfilling
• Suitable for water, oils
and many other liquids
• Can remove water from bunded
fuel tank cabinets
• Removes water from fish tanks,
bilges and inaccessible areas
• To install the foam simply insert each piece of foam through
the filler neck (for 122mm standard sized lids).
• Each pack of BF200 is contains enough to baffle 200L of clean diesel.
• If installing in a larger tank, simply use multiple packs of
BF200 to match the capacity of your tank
• The Foam is free draining because of its open cell
structure and only uses ~2% of tank capacity
• The high surface area of the foam maximises its ability
to slow down diesel from slapping the walls of a tank in
transport to improve vehicle handling
CODE
DESCRIPTION
LENGTH
WIDTH
HEIGHT
LIST (EX GST)
CAT
BF200
Dieselpak Baffling Foam
1000mm
75mm
75mm
$148.11
A
ˆ INDENT ORDER
CODE
DESCRIPTION
LIST (EX GST)
CAT
PF-5008
Vacuum oil extractor
$174.78
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.47
Born to Perform
Diesel Accessories
FUEL CUBE 240 VOLT DIESEL DISPENSER
Kit wall support
Optional: R12737000
The Piusi Diesel Fuel Cube is designed to be a convenient diesel distribution device for noncommercial applications. The pump and meter combination allows for quick and accurate delivery from
stationary tanks. The self priming pump is rated for continuous pumping and includes an internal bypass
which will enable when the tank fills or the trigger is released.
• 230 volt self priming vane pump up to 70L/min open flow
• Litre meter kit
• Convenient on/off switch nozzle holster allows to switch off when replacing the nozzle
• Includes 4 metres of diesel delivery hose and automatic shut off gun with swivel
connection and suction filter check valve
Specifications
Meter
Pump
• Includes internal bypass (3 min. max) Accuracy: ± 1% (after calibration)
Batch readout (max): 999 litres
• Maximum suction (head) 10 metres
Total readout (max): 999999 litres
• Self priming
Metering resolution: 0.1 litres
• 2 metre power lead
CODE
DESCRIPTION
OPEN FLOW LENGTH WIDTH
F0059100A
Fuel Cube 240 Volt
Diesel Dispenser
70L/min
380mm
HEIGHT
380mm 480mm
Diesel Accessories
R12737000 Optional Wall Mount Kit
DIESEL TANK LEVEL INDICATOR
• Detects the depth of diesel in stationary tanks
• Upper and Lower limit alarms can be set
• Contains 10m of probe tube allowing for convenient placement
of control unit away from the tank (max probe tube length 50m).
Specifications
Power Supply: 240V / 50Hz
Full Scale: 4m (12 feet)
Accuracy: ±1% of full scale
WEIGHT
(DRY)
LIST (EX GST) CAT
26kg
$1,652.17
A
$91.30
A
Never run out, know how
much diesel you have in
the tank – even from 50
metres away!!
Can read fill volume as height, volume and filling percentage
The Diesel Tank level indicator measures the static pressure
exerted by a fluid to determine the level volume of a tank. This unit
must be only used in environments where both the tanks fluid and
the control unit are at atmospheric pressure.
Packaging Dimensions: 300mm X 410mm X 100mm
CODE
DESCRIPTION
LIST (EX GST)
CAT
F0075510D
Diesel Tank Level Indicator
$756.52
A
DRUM OIL KIT
A simple to install Piusi 12-volt oil dispenser to fit to your oil drum
• Directly mounts to the drum opening by 2” drum connector
• 12-volt Viscomat gear driven oil pump
• 30 minute duty cycle
• Includes suction hose with filter and non-return valve
• 4.5L/min open flow (oil)
• 4 metres fuel delivery hose (1/2”)
• EASYOIL dispensing nozzle with manual non-drip swivel connection
Optional inline oil meter available, see
below for further details (Code: F0047500A)
Pictured: Drum oil kit with oil drum barrel shown for illustrative purposes only
p.48
CODE
DESCRIPTION
LIST (EX GST)
CAT
F00268000
Drum Oil Kit
$747.83
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
ˆ INDENT ORDER
Diesel Accessories
Pictured: meter
with optional rubber
protector
OIL & DIESEL METER
CODE
DESCRIPTION
LIST (EX GST)
CAT
F0047500A
Oil and Diesel Meter
$377.39
A
F08277000
Rubber Meter Protector
$29.57
C
This Piusi inline fuel meter can be fitted to your diesel or oil
pumping product, or directly to the dispensing nozzle of the
Silvan Drum Oil Kit
Specifications
• Suitable for oil, diesel, antifreeze
• Measurement resolution of 0.005 litres
• Accurate to ± 1% (after calibration)
• 1-20 L/min flow rate
• Batch readout (maximum): 99999 litres
• Total readout (maximum): 999999 litres (plus x10 & x100)
Connections
Inlet: 1/2” BSP (Female) - Outlet: 1/2” BSP (Female)
PIUSI RETRACTABLE
DIESEL HOSE REEL
10 METRE DIESEL FUEL
DISPENSING HOSE
CODE
DESCRIPTION
LIST (EX GST) CAT
Diesel Fuel
F12785000 Piusi
Dispensing Hose $206.09
C
PIUSI 8 METRE
RETRACTABLE HOSEREEL
• Piusi 8mtr x ¾” Retractable hosereel
• Heavy duty spring rewind retractable
reel with simple hose guide
• Supplied with 8 metres of ¾” delivery hose
• Adjustable arms for easy positioning as required
• Reduced pressure loss through the proper sizing
through the hydraulic system
• Latch mechanism protective that prevent
accident contact with the hands
• Complete with Inlet hose swivel and Elbow
• 1” BSP Inlet and Outlet
• L 450mm X W 220mm X H490mm Weight 19kg (with hose)
CODE
DESCRIPTION
LIST (EX GST)
CAT
F00750090
PIUSI 8 metre Retractable hosereel
$1,102.29
A
Diesel Accessories
Retractable hose reel for diesel
and oil. Capable of holding up to
10 metres of 1” I.D. hose
Features:
• 10 metres of antistatic hose
• Crimped 1” BSP male connections
• Rated to10 Bar
• 25mm I.D. hose
• Spring rewind
• Inlet 1” BSP
• Outlet 25mm hose-tail
• Max pressure 10 Bar
• L 530mm X W 250mm X H550mm - Weight 19kg
CODE
DESCRIPTION
F00750010 Piusi Diesel Hose Reel ( without hose)
LIST (EX GST) CAT
$800.00
A
PIUSI 10 METRE
RETRACTABLE HOSEREEL
• Heavy duty spring rewind retractable reel with simple hose guide
• Supplied with 10 metres of 1” delivery hose
• Adjustable arms for easy positioning as required
• Reduced pressure loss through the proper sizing
through the hydraulic system
• Latch mechanism protective that prevent
accident contact with the hands
• Complete with Inlet hose
swivel and elbow
• 1” BSP Inlet and Outlet
• L 550mm x W 250mm x H 530mm
x Weight 26kg (with hose)
CODE
DESCRIPTION
LIST (EX GST) CAT
F00750030
PIUSI 10 metre retractable hosereel
$1,063.91
A
RETRACTABLE HOSEREEL KIT
SUIT DIESELPAK TANKS
Pictured: PF16
with optional
trigger
CODE
DESCRIPTION
LIST (EX GST)
CAT
PF16
Fitted with 10 meters of 1” hose
$1,363.43
A
PF20
Fitted with 8 meters of ¾” hose
POA
A
ˆ INDENT ORDER
• Supplied with hosereel, bolts, adaptors and hose to mount to DieselPak units.
• Supplied fitted with diesel hose
• Heavy duty spring rewind with simple hose guide
• L 550mm x W 250mm x H 530mm x Weight 28kg (with hose)
• Suits models below
• SQD300-X1 SQD300-X2
• SQD400-X1 SQD400-X2
• SQD800-X1 SQD800-X2
• SQD800-3 SQD800-4 SQD800-6
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.49
Born to Perform
Diesel Accessories
K44- 4 DIGIT MECHANICAL DIESEL METER
The K44 is an easy to install Diesel meter manufactured by Piusi to provide large volume batch readout (up to
9999L) for high resolution fuel monitoring on an easy to read mechanical display
• Meter face can be rotated in four different orientations
• Monitor the fuel usage when trasferring to a machine
Specifications
Flow rate: 20-120L/min
Batch readout (maximum): 9999 litres
Total readout (maximum): 9999999 litres
Accuracy: ±1% (after calibration)
Metering resolution: 0.1 litres
Connections
Inlet: 1” BSP (Female), Outlet: 1” BSP (Female)
CODE
DESCRIPTION
LIST (EX GST)
CAT
PF14
Piusi 4 Digit Mechanical Diesel Meter K44
$407.83
A
DIESEL METER KIT
Diesel Accessories
Is an accessory meter kit for the DieselPro Range of transfer units that enhances the functionality by
providing the user with the ability to track and monitor their usage of diesel.
The Meter offers the ability to measure the litres dispensed with a resettable (batch) count and a
permanent total count that is non resettable. The digital meter uses non volatile memory to ensure that its
records are not lost even when the batteries are changed. The Kit is suited only for the DieselPro Transfer
units using the BP3000 Diesel pump. The following product codes are suitable for use with this meter kit:
SQDN200L-X1, SQDN400L-X1, SQDN600L-X1
See more information on PF11.
CODE
DESCRIPTION
LIST (EX GST)
CAT
PF11-X2
Digital litre counter kit
$428.13
A
K24- DIGITAL DIESEL LITRE COUNTER
Features include:
• Easy to mount inline fuel meter
• Able to be calibrated and provides information as to the individual litre count or the totality of litres counted
• Flow rate of 10 - 120L/min
• Compact and sturdy design H 55mm x W 75mm x D 100mm
• Max. pressure 10 bar of 145 PSI
• Accurate to +/- 1%
• 1” BSP female inlet and female outlet
CODE
DESCRIPTION
LIST (EX GST)
CAT
PF11
Digital Litre Counter
$357.39
A
MECHANICAL LITRE COUNTER
DIESEL FUEL METER
• 1” BSP female brass ports
• 3 digit counter and 6 digit total counter
• Reset knob
• 20 to 80L/min.
• 3 bar maximum pressure
• 1% +/- accurate
• L 148 x W 171 x H 109mm
• 4 digit counter & 8 digit total counter
• Operating pressure max 3.5 bar (49 psi)
• Flow rate 20-120L/min
• Suitable for gravity feed or pump applications
• Accurate to +/- 1%
• Aluminium metering chamber
• 1” BSP thread connection
• Mechanical readout device with rotating wheels
• Subtotal can be set to zero, total readouts cannot
Features include:
Pictured: Mechanical
Counter (515040)
CODE
DESCRIPTION
LIST
(EX GST)
CAT
515040
Mechanical Litre Counter
$275.65
A
515040-1
Mechanical Litre Counter kit suit
300, 400 & 800 Litre Dieselpaks
$275.65
A
p.50
Features include:
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
CODE
DESCRIPTION
LIST (EX GST)
CAT
PF12
Diesel Fuel Meter
$210.43
A
Diesel Accessories
PIUSI MANUAL SHUT-OFF GUN
PIUSI HI FLOW AUTO SHUT-OFF GUN
Features include:
• Aluminium
• Capacity up to 120L/min.
• 1” BSP female inlet
CODE
DESCRIPTION
LIST (EX GST)
CAT
PF0225-02
Manual shut-off gun
$59.13
A
• HI Flow Diesel transfer gun
• High quality, heavy duty auto shut-off dispensing nozzle
• 280L/min max capacity
• 38mm dispensing spout
• Lock on Latch
• 1 ½” swivel supplied
• Weight 3.25kg
• (not suitable for gravity
fed applications)
AUTO SHUT-OFF GUN
This gun is featured on most Selecta Dieselpaks
Features include:
• Capacity to 58L/min.
• Requires 50kPa (7.5psi) to open
• 3/4” BSP female inlet
Note: Will not operate if gravity fed
CODE
DESCRIPTION
LIST (EX GST)
CAT
PF01
Auto shut-off gun
$76.52
A
CODE
DESCRIPTION
LIST (EX GST)
CAT
PF18
Automatic shut-off gun
$421.12
A
ADAPTORS
Pictured: PF01-SW
DIESEL SWIVEL ADAPTOR
• High quality Auto shut off dispensing nozzle
• 120L/min max capacity
• 29mm dispensing spout
• Trigger lock
• 1” BSP female port
• Weight 1.8kg
• (not suitable for gravity fed applications)
• Optional Stainless Steel swivel to suit (PF01-SW3)
Features include:
Pictured:
PF01-SW3
• BSPT thread Male/ Female adaptor
• Made from stainless steel/aluminium
CODE
DESCRIPTION
LIST (EX GST)
CAT
PF17
Automatic shut-off gun
$115.27
A
PIUSI AUTO SHUT-OFF GUN
CODE
SIZE
LIST
(EX GST)
CAT
PF01-SW
3/4” Male to 3/4” Female
$18.26
A
PF01-SW2
3/4” Male to 1” Female
$19.13
A
DRY BREAK DIESEL CONNECTOR
• Connections 1” BSP female
• Spring loaded valves close
when disconnected
• Allows delivery hoses to be
disconnected without leaking
• Spring loaded locking mechanism
and embossed profile for ease of use
Features include:
• Capacity to 120L/min.
• Requires 30kPa (4.4psi) to open
• 1” BSP female inlet
Note: Will not operate if gravity fed
CODE
DESCRIPTION
LIST (EX GST)
CAT
CODE
DESCRIPTION
LIST (EX GST)
CAT
PF13
Auto shut-off gun
$179.13
A
F00636000
Dry Break Diesel Connector
$125.22
A
DIESEL SWIVELING ELBOW
Ideal for attaching directly to a diesel pump which then allows the hose to be directed at
sharp angles directly from the pump without the risk of causing the hose to be damaged
by kinking. Damage to hose caused from pulling and twisting of
hoses increases the risk of spills and cost money in down time.
The F14567000 can be directly attached to the following pumps without additional fittings:
• 12V DC Hi-Flow pumps (CODE: F0036302A, PF363260)
• 12/24V DC Dual Voltage pump (CODE: PF341090, F00341160)
• 240VAC Pump (F0073022A)
• 1” BSP connection
CODE
DESCRIPTION
LIST (EX GST)
CAT
F14567000
Diesel Swiveling Elbow
$56.52
A
ˆ INDENT ORDER
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.51
Diesel Accessories
SELECTA DIESEL TRANSFER GUN
Born to Perform
Selecta Blue Range
SCR Diagram
Silvan’s Selecta division now offers a full range of urea
dispensing equipment suited to the strict requirements of
contamination free transfer of AUS32, a 32% aqueous urea
solution, also known as DEF (Diesel Exhaust Fluid).
Engine
Selecta’s range of transfer equipment for AUS32 is sourced
from the Suzzara Blue range from Piusi, the world leader in
fluid handling solutions. All products are made of AUS32
compatible materials and the range includes electric pumps,
fittings, hoses, hand pumps, flow meters, dispensing nozzles
and powered delivery kits for drums and IBC containers.
(’Ad Blue only’
maybe inscribed
on cap)
SCR
Catalyser
Injector for AUS32
(Ad Blue)
Exhaust system
About AUS32 / DEF
The new SCR system requires a separate storage tank on the vehicle from
which the AUS32 is sprayed directly into an additional catalyser in the
exhaust where the pollutant exhaust gases (NOx) are converted into safe
atmospheric gases (N2). The approximate consumption rate of AUS32 is 5
litres to every 100 litres of diesel used.
Australian regulators have adopted European regulations in the Australian
Design rules (Standard ADR80/03) to limit vehicle emissions. The change to
the Standard comes into effect January 1st 2011 for all new ‘diesel heavy
duty vehicles’. The EURO 5 standard, effective September 2009, limits the
quantity of NOx (Nitrogen oxides) and particulate matter emitted into the
atmosphere by ‘diesel heavy duty vehicles’. As a result many trucks and
tractors recently imported to Australia already comply with the standard.
Selecta Blue Range
Outlet for clean
exhaust gas
AUS32
Tank
AUS32 is a solution made to stringent standard, to be free of chemical
contaminants, to protect the catalyser and to maintain optimum efficiency.
AUS32 is not classed as a dangerous substance or good, however it can be
corrosive to inappropriate metals, plastics and hoses which in turn could
introduce contaminants into your catalyser.
In order to comply, the motor vehicle industry has developed new
technologies to reduce emissions to meet the standard. A new engine
exhaust system called Selective Catalytic Reduction (SCR) system uses a
urea solution to treat emissions. This urea solution (AUS32 / DEF) is also
commonly referred to by its trade names of Ad Blue™, NoNOX® and Air1®.
AUS32 is available in bulk tanker delivery, 1000L IBC pallet containers,
200L drums and 10L emergency containers. Always ensure that your
supply of AUS32 is made to the appropriate standards ISO 22241.
Selecta Blue Drum Pump Kits
This 240 volt pump kit comes with a bracket that fits neatly onto the lid of the 200 litre AUS32 drums,
and can be easily moved between drums. It also features a nozzle holder and all fittings required.
CDS/SEC Suction tube
Code: F15606000
Selecta Blue Drum Trolley Pump Kit
Drum pump kit Selecta Blue
• Flow rate 35L/min
• Stainless steel base with nozzle holder.
• Self priming pump 240V
• Manual nozzle.
• Delivery hose 4 m.
• Comes with CDS quick suction connector
and CDS/SEC suction tube (F15606000)
• Hose tail and clamps provided
Code: F0020135A
Also available is a bare trolley that, combined with your
200 litre AUS32 drum, Selecta Blue IBC kit and CDS / SEC
suction tube, allows you to have a mobile filling station for
your vehicles
> Drum not included
Plug head BCS thread 54x4
Drum Dispenser
Code: F0020135A
Trolley
Code: R12068010
+
Selecta Blue
Pro/Basic kit
and any of the hand pumps
refer to page 58
+
Dip Tube
Code: F15606000
(On Request)
Code
Description
Flow
rate
L/min
Volt/Hz
Rpm
Watt
F0020135A
Drum Pump kit
Selecta Blue
35
230/50
2900
R12068010
Troll (Drum Trolley)
35
230/50
2900
p.52
Meter
Nozzle
Delivery
hose
metres
On-Off
Switch
Weight
Kg
Packaging
mm
LIST
(ex GST)
CAT
370
No
Manual
4
Yes
16
480x370x260
POA
A
370
No
Manual
6
Yes
26
1090x680x300
POA
A
AC
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Selecta Blue Range
IBC Basic Selecta Blue
This 240 volt pump kit attaches directly to the
framework of an IBC container. The self-priming pump
kit contains everything you need to transfer the AUS32
from the container into your vehicle, contamination free.
This kit can easily be moved between IBC containers
and features a manual shut-off gun.
• Flow rate 35L/min
• Stainless steel base with nozzle holder
• Self priming pump 240V
• Manual nozzle
• Delivery hose 6m.
• Suction hose 1.1m
• Comes with CDS quick suction connector
(for connection to CDS suction tube)
* Suction tube not supplied (F15606000)
• Hose tail and clamps provided
> Tank not included
Code
Flow
Description rate
L/min
Delivery
On-Off Weight Packaging
Meter Nozzle hose
Switch Kg
mm
Volt/Hz Rpm Watt
metres
F00201B20
IBC Basic
35
Selecta Blue
230/50 2900 370 No
AC
Manual 6
Yes
16
Optional bottom suction connection
Code: F15515010 (To suit all IBCs
with 2” bsp valves)
Optional CDS/SEC Suction tube
is for use in conjunction with
the CDS quick suction
connector (see accessories
for Code: R15452000)
Tube suits lids on IBC
tanks with a BCS
56x4 (course) inner thread
LIST
(ex GST)
480x370x260 POA
CAT
A
Selecta Blue Range
IBC Pro Selecta Blue
> Tank not included
This 240 volt pump kit attaches directly to the framework of an
IBC container. The self-priming pump kit contains everything
you need to transfer the AUS32 from the container into your
vehicle, contamination free. This kit can easily be moved
between IBC containers and features an automatic shut-off gun
and litre metre.
• Flow rate 35L/min
• Meter K24.
• Accuracy +/- 1%
• Stainless steel base with nozzle holder
• Self priming pump 240V
• Automatic stainless steel nozzle
• Delivery hose 6 m.
• Suction hose 1.5 m.
• Comes with CDS quick suction connector (for connection to
CDS suction tube) * Suction tube not supplied (F15606000)
• Hose tail and clamps provided
Code
Description
Flow
rate
L/min
Volt/Hz
Rpm
Watt
F00201B10
IBC Pro Selecta Blue
35
230/50
2900
370
AC
Meter
Nozzle
Delivery
On-Off
hose
Switch
metres
Weight Packaging
Kg
mm
LIST
(ex GST)
CAT
Yes
Automatic
6
16
POA
A
Yes
480x370x260
Box Pump Kit
This 240 volt pump kit comes in a solid steel lockable box, and
can be mounted near your AUS32 storage tanks. The self-priming
pump kit contains suction hose, delivery hose, auto shut-off gun
and fluid meter. A great way to protect your AUS32 storage.
• Flow rate 35L/min
• Meter K24
• Accuracy +/- 1%
• Protective steel pump housing with key lock
• Self priming pump 240V
• Automatic stainless steel nozzle
• Delivery hose 4m
Code: F00201960*
Code
Description
Flow
rate
L/min
Volt/Hz
Rpm
Watt
F00201960
Selecta Blue Box
35
230/50
2900
370
* Indent order only
AC
Meter
Nozzle
Delivery
hose
metres
On-Off
Switch
Weight
Kg
Packaging
mm
LIST
(ex GST)
CAT
Yes
Automatic
4
Yes
25
575x320x607
$2,168.00
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.53
Born to Perform
Selecta Blue Range
This range of self priming diaphragm pumps are available in
12, 24 and 240 volt models, with 35-40 L/min flow rate. The
12 volt and 24 volt pumps also come with a carry handle.
Selecta Blue 240 Volt pump
Selecta Blue Range
• AC Pump Flow rate 35-40 L/min
• Self priming
• Max working pressure 1.5 bar
• Motor rated IP55
• 2 meter power cord
Code: F00203010
Selecta Blue 12 & 24 Volt pumps
• DC Pump Flow rate 35-40 L/min
• Self priming
• Max working pressure 1.5 bar
• Duty cycle 30 min
• 2 meter power cord
with alligator clips
12 Volt Code: F00204000*
24 Volt Code: F00204010*
Code
Description
Flow
rate
L/min
Volt/Hz Rpm Watt
F00203010
Pump 240V AC Selecta Blue
35 - 40
230/50 2900
AC
Connections
Power
Amp Cable
370
-
2m
F00204000* Pump 12V DC Selecta Blue
35 - 40
12
2800
-
18 2m
F00204010* Pump 24V DC Selecta Blue
35 - 40
24
2800
-
9
2m
IN
hose tail
3/4”
hose tail
3/4”
hose tail
3/4”
OUT
hose tail
3/4”
hose tail
3/4”
hose tail
3/4”
On-Off Weight Packaging
Switch Kg
mm
LIST
(ex GST)
CAT
Yes
7
350x180x280
POA
A
Yes
3.6
350x180x280
POA
A
Yes
3.6
350x180x280
POA
A
Selecta Blue Hand Pumps
Hand pumps are an economical way to dispense small quantities of AUS32 at up to 15 L/min. Hand pumps come with a dip tube for drums
and the pumps feature a 1” outlet
Rotary hand pump
with dip tube
Code: F00332050
Optional:
Piston hand pump with delivery kit,
dip tube and drum adaptors
Code: F00332100
Piston hand pump
with dip tube
Code: F00332090
Rotary hand pump with delivery kit,
dip tube and drum adaptors
Code: F00332080
Code: F15236000
Adaptor for hand pump: Greif drum
Code: R15128000
Adaptor for hand pump: Mauser drum
Code
Description
Spout
BSP
Delivery
hose m
Dip tube
Mauser and Greif
adapter for drum
Weight kg
Packaging mm
LIST
(ex GST)
CAT
F00332050*
Rotary pump
-
-
•
-
1.8
160x340x140
POA
A
F00332080
Rotary pump kit
3/4”
3
•
•
3.4
357x357x275
POA
A
F00332090*
Piston pump
-
-
•
-
1.5
160x340x140
POA
A
F00332100
Piston pump kit
3/4”
3
•
•
3.4
357x357x275
POA
A
p.54
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
* Indent order only
Selecta Blue Accessories
Delivery nozzles for AUS32 (and water) are available with either manual
or automatic shut off and are also available with K24 meter.
Automatic nozzle with K24
• Flow rate up to 40 L/min
• Spout ext. Ø 3/4”
• Hose tail 3/4 with swivel
Code F00870000
Automatic nozzle
• Flow rate up to 40 L/min
• Spout ext. Ø 3/4”
• Hose tail 3/4 with swivel
Code F0061903B
Manual nozzle with K24
• Flow rate up to 80 l/min
• Spout ext. Ø 3/4”
• Hose tail 3/4 with swivel
Code F00870020
Manual nozzle
• Flow rate up to 80 L/min
• Spout ext. Ø 3/4”
• Hose tail 3/4
Code F14761000
Options:
Plastic adapter
Swivel adaptors for
connecting nozzle and meter
Manual-nozzle adaptor
Plastic swivel
Code F15776000
Auto-nozzle adaptor ¾” BSP M – 1” BSP F
Code F16475000
Description
Pressure
bar
Display
Weight
kg
LIST
(ex GST)
CAT
F0061903B
Automatic nozzle
3.4
No
2.6
POA
B
F14761000
Manual nozzle
3.4
No
0.2
POA
B
F00870000*
Automatic nozzle with K24
3.4
Yes
3.4
POA
A
F00870020*
Manual nozzle with K24
3.4
Yes
0.6
POA
A
Selecta Blue Accessories
Code
Selecta Blue Meters
Easy to install inline at pump or delivery nozzle end, with a
compact easy to read display. Easy to replace batteries (2x AAA)
are long lasting, in meter with non volatile memory.
Code F16073000
Code
F15484000
Plastic
fittings available
(see page 62)
Common Features:
• 1” BSP M/M
• Single channel reed switch
• Working Flow rate 6-100L/min
• Accuracy to +/- 1%
• Adjustable calibration
• Resolution to 0.1L
• Batch total to 99999L
• Complete total to 999999L
• View flow rate L/min
Socket 1” BSP/BSP
Code
F15179000
1” BSP
Accuracy +/- 1%
Possibility of calibration.
Flow rate up to 40 l/min
Pulse OUT 100 p/l
K24 meter
• Display can be rotated
to 4 positions
• 1” BSP/BSP socket provided
Code: F00407090
This meter is easy to install. A tight stainless steel body provides endurance
for use in every condition. Also available is a pulse display powered by 2xAAA
batteries and has a non volatile memory. The Turbinox pulse meter can also be
used with other pulse compatible displays
• Pulse out 100 p/L
• 1” BSP/BSP socket provided
Code: F0040721B
Flow-rate
Pressurer
L/min
bar
K24 Meter (1 socket)
6-100
10
Yes
FO040721B*
K24 Pulse-meter (1 socket)
6-100
10
No
88
F0042000A*
Turbinox pulse meter
10-40
20
No
88
F0049503B*
Remote display with Pulse OUT
-
F16073000*
Socket 1” BSP/BSP (20 pcs)
-
Code
Description
F00407090
* Indent order only
Inline pulse meter
Code F0042000A
Remote display
Code F0049503B
K24 Pulse-meter
1” BSP
Turbinox Pulse Meter
Display
Pulse OUT (p/g)
Pulser
Display
version
version
-
Yes
-
-
-
Weight
Packaging
kg
mm
0.4
LIST
(ex GST)
CAT
Blister
POA
A
0.4
Blister
POA
A
0.5
20 x 12 x 14
POA
A
1-100
1.2
20 x 12 x 15
POA
A
-
2.4
Box (20pcs)
POA
B
-
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.55
Born to Perform
Chemical Transfer
SAFETY SPRAY HELMETS
K80S-T1 ASSEMBLY
The T1 motor/fan pack incorporates a built-in
rechargeable battery pack, which draws on the tractor/
vehicles 12-volt system through a dashboard plug. This
self-contained rechargeable power source will provide
power for the filter and fan for more than 9 minutes.
This permits the wearer to safely leave the tractor or
vehicle seat for
short periods to
make machine
adjustments,
check spray
performance, add
chemicals to the
tank, etc.
CODE: K80S-T1
Nickel Cadmium recharges
from tractor battery
Chemical Transfer
K80S-T5 ASSEMBLY
AG RUNNER CHEMICAL TRANSFER PUMP
The Shurflo Ag Runner allows you to pump and measure chemical from
the chemical container directly into the sprayer tank without the need
for manually measuring or any other handling of the chemicals.
• Max Output: 40 L/min open flow
• Viton equipped pump
• Max Pressure: 15psi
• 12 volt operation with 6m lead & alligator clips
• 1” x 3.6m suction / 1” x 3.6m delivery hoses
• Electric litre meter
CODE
DESCRIPTION
LIST (EX GST)
CAT
361-SF1105-PTS
Ag Runner Chemical Transfer Pump
$1,826.09
A
361-FM-1100
Flow Meter only
$504.35
B
The 6-volt battery pack and motor/fan pack are carried
separately on a belt supplied with the unit which
permits complete freedom of movement for up to 6
hours. The battery pack is recharged from 240-volt
mains via a recharging unit
supplied with the helmet.
Totally self contained. The
six hour lifespan of a
charged battery pack also
allows a greater variety of
tasks to be carried out safely.
CODE: K80S-T5
Sealed lead acid supplied
as belt pack
BATCH FILLING METER
This easy to transport fill meter measures fill in litres, can be
set by user to a predetermined amount, and requires a 12 volt
power supply. Will automatically shut-off when
pre-selected volume has been achieved.
Other features include:
• Suitable for transfer of water into larger tanks
• Simply fit it to your own filling pump
• 12 volt power supply
• 2 “ Male fittings
• Batch Fill to user set amount
• 30 to 600 L/min flow rate range
• 10 meter power cable
• Ideal for filling sprayers
• Flow meter controls motorised ball valve
KASCO A1P3 FILTER
Don’t guess, fill
your spray tank
accurately using
a 12V batch
metre system
CODE
DESCRIPTION
LIST (EX GST)
CAT
4622BA001
Batch Meter Filling System
$2,380.71
A
p.56
The A1P3 filter is particularly formulated to suit
insecticides, fungicides, weed killers, organic vapours
and dust, fumes and mist. The unique filtering system
uses filter paper as a particulate filter medium and
activated carbon as the vapour filter medium. When not
in use a plastic cap seals the filter and adds to its life.
CODE
MOTOR
K80S-T1
12-volt DC Single speed airflow
6-volt DC over 120 L/min.
K80S-T5
FAN
178-0601-19 Kasco A1P3 single filter
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
LIST (EX GST) CAT
$1,504.35
A
$1,669.57
A
$111.30
B
Chemical Transfer
MIXAIDER 150 LITRE UNIT
A free standing self contained mixing and chemical transfer
system complete with 240-volt pump. Makes pre-mixing and
inducting chemicals into sprayer tanks easy.
Features include:
• 150 litre polyethylene tank with hinged lid and moulded calibration marks
• 240-volt Davey XF series pump, corrosion resistant casing, silicon carbide
mechanical shaft seal, motor thermal protection and 1.8m electric lead
• Galvanised steel support frame.
• Four individual on/off taps to control:
1. Hopper rinsing ring mounted inside the top of tank
2. Push activated chemical drum rinsing nozzle
3. Recirculation mixing
4. Cam-lock connector 3/4” for emptying.
• 3 way ball valve with 1” Cam-lock connection to
draw water from external source if required
CODE
DESCRITION
CAPACITY
LENGTH
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
042V-01
240-volt Mixaider on stand
150 litre
700mm
700mm
1025mm
32kg
$3,252.17
A
Chemical Transfer
SILMIX CHEMICAL
TRANSFER UNIT
The Silmix is ideal for the thorough mixing and
transfer to the sprayer tank of powdered,
granulated or liquid chemicals.
Features include:
DRAWING
0111
Pictured:
042J-05ST
Silmix with stand
The Silmix makes chemical handling safer and ensures that
transfer of chemicals to the sprayer tank is performed quickly,
safely and efficiently. The 60 litre capacity Silmix hopper is
impact resistant, U.V stabilised, translucent polyethylene and
fitted with a hinged lid and rubber tie down. The unit will
operate from either your sprayer’s pump or an external water
supply of 60 psi or more
HOW IT WORKS
Drum Washer
Water pressure is
directed to rotating
nozzle. Push drum down
to rinse container.
Powder Washer
Water pressure is directed to
spraybar, which mixes powders
prior to or during transfer of
chemicals.
Chemical Transfer
Water pressure is directed to
the 50 mm Venturi inductor,
transferring chemicals from
hopper to main tank.
CODE
DESCRITION
CAPACITY
LENGTH
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
042J-05ST
Silmix with stand
60 litre
750mm
420mm
920mm
32kg
$2,391.30
A
GEOMIX 40 CHEMICAL TRANSFER UNIT
40 litre polyethylene tank, hot-galvanised frame. Phytosanitary product
container washing unit with safety control. Ceramic nozzles.
Mixer inspection window. Adaptable to any type of sprayer.
Features include:
Unit comes with a rinse nozzle and a Venturi mix nozzle
CODE
DESCRIPTION
LIST (EX GST)
CAT
50300752F
Geomix 40
$921.74
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.57
Born to Perform
Selecta Safety
1. BLACK EAGLE FACESHIELD
COVGUARD COVERALLS
The stylish MSA Black Eagle Faceshield
features a chin guard which provides extra
protection by preventing flying particles getting
underneath the visor. Fully adjustable headgear allows a comfortable and perfect fit.
These comfortable to wear coveralls
are ideal protection against particle
and chemical exposure. They are
tough, lightweight, water repellent
and made from breathable high
density polyethylene,
spun-bonded material.
2. PROTECTIVE GOGGLES
Features a scratch resistant, anti-fog lens
that protects against chemical splash
and ultraviolet rays whilst permitting
unobstructed viewing.
CODE
SIZE
LIST (EX GST)
CAT
SPC-100
Medium
$18.26
B
SPC-200
Large
$18.26
B
3. DISPOSABLE DUST MASK
SPC-300
X-Large
$18.26
B
These quality Selecta dust masks provide
excellent protection and are suitable for a
variety of situations.
SPC-350
XX-Large
$18.26
B
CODE
DESCRIPTION
LIST (EX GST)
CAT
1
SH-227500
Face Shield - complete
$69.57
B
2
GOGGLES1
Protective goggles
$32.17
B
3
DM-003
(P2) 3 Pack for dusts,
mists and fumes
$22.61
B
Selecta Safety
REF
MEASURING JUG
Measure chemicals accurately and
pour them safely with these quality
measuring jugs.
Made from nitrile rubber and chemically toughened to meet
demanding user requirements, the Selecta chemical resistant
gloves provide protection against most agricultural chemicals.
CODE
DESCRIPTION
LIST (EX GST)
CAT
JA-2101040
Size 10
$29.57
B
JA-2101045
Size 11
$27.83
B
NITRILE GENERAL
PURPOSE GLOVES
• Tough and durable with excellent
CODE
DESCRIPTION
LIST (EX GST)
CAT
JA-2102032
1 litre Measuring Jug
$18.26
B
JA-2102033
3 litre Measuring Jug
$27.83
B
JA-2102034
5 litre Measuring Jug
$39.13
B
chemical and oil resistance
• Made from 100% Nitrile rubber
with textured non-slip grip
CODE
SIZE (Box of 100)
LIST
(EX GST)
CAT
JA-2101009
Medium (Box)
$26.09
B
JA-2101010
Large (Box)
$26.09
B
JA-2101011
X-Large (Box)
$27.83
B
CHEMICAL RESISTANT GLOVES
25 LITRE EZY POUR
CHEMICAL BUCKET
Made from nitrile rubber, sanitised
liner and chemically toughened to
meet demanding user requirements,
the Selecta chemical-resistant
gloves provide protection against most
agricultural chemicals.
A heavy duty chemical bucket with
graduated handgrip, made from quality
U.V. stabilised polyethylene. Will stand
the test of time.
CODE
DESCRIPTION
LIST (EX GST)
CAT
CJ25L
Ezy Pour Chemical Bucket
$134.78
B
p.58
NITRILE GAUNTLETS
CODE
DESCRIPTION
LIST (EX GST)
CAT
WM1
Chemical Gloves
$20.00
B
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Control Valves
2 OUTLET ON/OFF CONTROL VALVE
DRAWING
2 outlet control, pressure regulator, bypass valve, gauge.
0216
Pictured: C1204-528
3 OUTLET ON/OFF CONTROL VALVE
3 outlet control, pressure regulator, bypass valve,
gauge. Features quick action on/off ball valves.
Pictured: G838CSY09
(Pressure gauge not included)
Pictured: C1204-191
CODE
(ATTACHED)
CODE
(REMOTE MOUNT)
CONTROL
VALVE
PUMP
APPLICATION
HOSE
INLET
SIZE
OUTLET
BYPASS
HOSE SIZE
MAX PRESS
KPA/PSI
MAX.
FLOW
LIST
(EX GST)
CAT
C1204-528
C1204-457
C1204-191
G838CSY09
C1204-195
C5004-05
C1204-211
C1204-257
2 Outlet
BP20/15
BP20/15
APS41
BP60/20, BP125/20
BP60/20, BP125/20
BP60/20, BP125/20
P48
19mm
13mm
13mm
1500/218
40L/min.
19mm
19mm
10mm
10mm
13mm
23mm
4000/580
2000/290
40L/min.
100L/min.
3 Outlet
19mm
3 Outlet
19mm
Remote control mounting kit
Service Kit to suit 2 Outlet Control Valve ( C1204-528 )
Service Kit to suit 3 Outlet Control Valve ( C1204-191, C1204-195 )
13mm
10mm
13mm
2000/290
3000/435
100L/min.
100L/min.
$140.87
$185.22
$140.87
$225.22
$243.48
$266.09
$225.22
$49.57
$90.25
$103.48
A
A
A
A
A
A
A
A
C
C
SERVICE KIT
CODE
CSN5
CSN2
2 Outlet
3 Outlet
3 OUTLET
4 OUTLET
3 outlet control, pressure
regulator, bypass valve, gauge.
Manufactured from Rilsan Plastic.
One lever 4 outlet control shuts
all boom sections off by simply
flicking main lever to one side,
standard with dual stage gauge.
DRAWING
DRAWING
0170
0170
CODE
(REMOTE MOUNT)
CONTROL
VALVE
PUMP
APPLICATION
HOSE
INLET
SIZE
OUTLET
BYPASS
HOSE SIZE
MAX PRESS
KPA/PSI
MAX.
FLOW
LIST
(EX GST)
CAT
C1204-034R
3 Outlet
BP60/20
19mm
13mm
23mm
2000/290
60L/min.
$215.65
A
C1204-332
4 Outlet
BP60/20, BP125/20, BP151/20
19mm
13mm
23mm
2000/290
150L/min.
$366.09
A
SERVICE KIT
CODE
CSN3
Service Kit to suit 3 Outlet Control Valve
$53.04
C
CSN1
Service Kit to suit 4 Outlet Control Valve
$128.70
C
* Controls include remote mount kit C5004-05
TRACTOR PTO COUPLING KIT
MALE SHAFT
Supplied with coupling, bracket and chains
with spring tensioner for affixing directly to
tractor. PTO shaft 540 RPM drive.
* WARNING Do not operate pumps
without appropriate safety guards fitted.
(Not supplied with coupling kits)
1 3/8” male x 6 spline shaft.
Bolts directly to most pumps
for PTO shaft connection.
CODE
TO SUIT PUMP
LIST(EX GST)
CAT
CPX01B
BP20/15
$167.83
C
CPX01
BP60/20
$167.83
C
P48
$167.83
A
APS41
$167.83
A
CPX10
CODE
CPX12
CPX16
TO SUIT PUMP
P48
AP31/APS41
KEY SHAFT
LIST (EX GST)
$88.70
$86.09
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
CAT
A
A
p.59
Control Valves
Selecta control valves regulate spray pressure, direct the flow of spray liquid from the pump to the spray nozzles and bypass excess
liquid back to the tank, in most cases through an agitator. All feature adjustable pressure regulator, glycerine filled gauge, hose
connections, mounting kits where applicable, on/off directional valves and bypass lock position.
Born to Perform
Diaphragm Pumps
AIR PRESSURE CHAMBER
Diaphragm Pumps
VISUAL OIL LEVEL SITE GLASS
MANIFOLD PARTS IN CONTACT
WITH LIQUID ARE MADE IN
PLASTIC MATERIAL
STRONG ALUMINIUM
CRANKCASE
CHEMICAL RESISTANT OIL
BACKED DIAPHRAGMS
METAL MOUNTING FEET
COMET DIAPHRAGM PUMPS
CAN RUN DRY
CODE: CAPS41
p.60
CODE: CPP48
CODE: CBP06020
METAL 1 3/8” SHAFT SUIT PTO,
ENGINES AND HYDRAULIC
MOTORS
CODE: CBP07515
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
CODE: CBP12520
CODE: CAPS145
Diaphragm Pumps
P, APS & BP SERIES
All Selecta diaphragm pumps
are built for 540 RPM operation,
are self priming and designed
so no special tools are required
for service. Tough and reliable
they will run dry without risk of
damage. All pumps are supplied
with appropriate hose connections,
mounting base plates and 1 3/8”
six splined shaft. Some models are
available with keyed shaft.
A
B
C
H
J
K
PUMP
MODELS
NO.
DIAPHRAGMS
OUTPUT
@ 540 R.P.M.
MAX
PRESSURES
KPA/PSI
H.P. REQ’D
AT MAX.
PRESSURE
L
A
5054
CAPS41
APS41
3
38L/min.
4000/580
4.1HP
325
208
287
10
$956.52
A
B
-
CAPS071
APS71
3
71L/min.
4000/580
9.5HP
313
384
289
16.5
$1,304.35
A
C
-
CAPS096
APS96
3
94L/min.
4000/580
12.3HP
313
402
361
21.5
$1,556.52
A
D
-
CAPS145
APS145
4
145L/min.
5000/725
23.4HP
373.5
335
423
51
$2,539.13
A
E
0507
CBP12520
BP125/20
3
121 L/min.
2000/290
6.5HP
293
293
265
12.3
$1,252.17
A
F
0191
CPP48
P48
2
51L/min.
3000/435
5.5HP
277
290
297
13.7
$1,052.17
A
G
0166
CBP06020
BP60/20
2
58 L/min.
2000/290
4.4HP
258
276
280
10
$895.65
A
CBP07515
BP75/15
3
68L/min
1500/518
2.7HP
238
276
271
12
$991.30
A
CAT
WEIGHT
(kg)
H
I
5054
CBP17120*
BP171/20
4
162 L/min.
2000/290
12.8HP
336
360
360
24
$2,104.35
A
J
-
CBP28020*
BP280/20
6
248 L/min.
2000/290
18.1HP
435
365
413
35
$2,765.22
A
K
-
CDS1401*
IDS1401
3
137L/min.
4000/580
21.5HP
359
401
396
45
$2,890.00
A
CDS2001
IDS2001
4
185L/min.
4000/580
22.4HP
309
501
418
60
$3,400.00
A
L
WARNING - Do not operate pumps without appropriate
safety guards fitted. RECOMMENDED OIL TYPE - MULTIGRADE OIL SAE 20W/50
See also page 61 - 62 for Control Valves PTO Cover as shown
on BP171/20 AND BP265/20 is standard on all pumps
Note: 1 bar = 100kPa = 14.5psi
CODE
PUMP
LIST (ex GST)
CAT
C5026-199
C5026-199
C5026-203
C5026-222
CSK15120
CSK1920
CSK2015
CSK2157
C5026-215
CSK6020K
CSK6020S
C5026-220
C5026-221
CSKAP70
CSKAPS166
CSKAPS71
CSKAPS96
C5026-226
CSKMP40
C5026-245
BP105/20,BP125/20
BP105/20,BP125/20
AZ120 (MK2)
APS145
BP151/20
MC19/20 & 20/20
BP20/15
2157 (Turbomiser)
P38 / P48
BP60/20
BP60/20
AZ90 (MK2)
AP140/AP165
AP70
APS166 & APS141
APS71
APS96
MP30
MP40
APS41
$156.52
$132.17
$236.52
$220.00
$182.61
$85.22
$87.83
$324.35
$108.70
$121.74
$121.74
$273.91
$294.78
$123.48
$255.65
$150.43
$259.13
$108.70
$116.52
$134.78
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
P, APS & \BP SERIES
All Selecta diaphragm pumps are built for 540 RPM operation,
are self priming and designed so no special tools are required
for service. Tough and reliable they will run dry without risk of
damage. All pumps are supplied with appropriate hose connections,
mounting base plates and 1 3/8” six splined shaft. Some models are
available with keyed shaft.
Control Valves PTO Cover as shown on BP75/15 is standard on all pumps
* Through shaft models allow for secondary point of operation, eg. To drive agitator,
blower fan in orchard applications.
PUMP SERVICE KITS
Our service kits have everything you need
to service your pump or control valve
in one convenient package, making
regular maintenance or running
repairs much more simple.
Selecta all-in-one service kits are the most
economical way to purchase the individual
parts required. They will also prove invaluable
for those emergency on the spot repairs.
D Denotes Desmopan diaphragms (long lasting)
S Denotes Splined model pump
K Denotes Keyed model pump
V Denotes Viton diaphragms
(longest lasting)
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.61
Diaphragm Pumps
H
W
(mm)
LIST
(ex GST)
CODE
L
DRAWING
I
F
REFERENCE
G
E
D
Born to Perform
Motorised Pumps
Selecta motorised pumping units provide a go-anywhere pressure pumping unit in a wide range of sizes and capacities. Each
unit consists of a matched engine and pump, control valve, base plate, hose connections and in most cases pressure gauge as
standard equipment.
MC20/20 4 STROKE
• Pressure accumulator with pressure gauge
• Honda engine GX120
• Oil backed diaphram pump
• Direct coupled to motor
• Adjustable pressure regulator
• Inlet size- 19mm, outlet size – 10mm
• Extra outlet (code: C2803-516) available
• 1 metre maximum suction lift
DRAWING
0192
CODE
ENGINE
TYPE
HORSE
POWER
MAX PRESS
KPA/PSI
MAX
OUPUT
NO.
OUTLETS
L
(MM)
W
(MM)
H
(MM)
WEIGHT
(KG)
DRIVE
TYPE
GAUGE
LIST
(EX GST)
CAT
LBA-34C
4 Stroke
4 Honda
2000/290
18.5L/min.
1
540
340
360
12
Gearbox
Yes
$2,417.39
A
Motorised Pumps
APS41 4 STROKE
2
• Pressure accumulator with pressure gauge
• Honda engine GX160 or Selecta Power
• Oil backed diaphram pump
• Direct coupled to motor
• Adjustable pressure regulator
• 1 metre maximum suction lift
• Inlet size- 25mm, outlet size – 12mm
1
CODE
REF
ENGINE
TYPE
HORSE
POWER
MAX PRESS MAX
KPA/PSI
OUPUT
NO.
OUTLETS
L
(MM)
W
(MM)
H
(MM)
WEIGHT
(KG)
DRIVE
TYPE
GAUGE
LIST
(EX GST)
CAT
LBA-42C
1
4 Stroke
5.5 Honda
4000/580
38L/min.
2
550
430
410
29
Gearbox
Yes
$2,582.61
A
LBA-42S
2
4 Stroke
6.5 Selecta Power
4000/580
38L/min.
2
550
430
410
29
Gearbox
Yes
$2,000.00
A
12 Volt Shurflo Pumps
SLV SERIES 12 VOLT DC PUMP
3.8 L/min open flow
CODE
VOLT.
OPEN
FLOW
PRESS.
KPA/PSI
VALVES
MATERIAL
DIAPHRAGM
MATERIAL
PRESS.
SWITCH
DUTY
RATING
PORT
SIZES
LIST
(EX GST)
CAT
361-SLV10-AA40
12V DC
3.8L/min.
275/40
Viton
Santo
Yes
Intermittent
3/8” Hose Barbs
$155.65
A
8000 SERIES 12 VOLT DC PUMP
There are three 8000 series Shurflo pumps available,
ranging from 4.5L/min. to 6.8L/min. open flow and 60psi
to 100psi. Ideal for agricultural and industrial applications,
hand spraying, fluid transfer, boom spraying, cooling,
caravans, camping and marine applications.
Pictured: 361-8000
CODE
Full viton equipped pump available 361-8000-342-136
VOLT.
OPEN
FLOW
PRESS.
KPA/PSI
VALVES
MATERIAL
DIAPHRAGM
MATERIAL
PRESS.
SWITCH
DUTY
RATING
PORT
SIZES
LIST
(EX GST)
CAT
361-8000
12V DC
6.8L/min.
413/60
Viton
Santo
Yes
Continuous
1/2” BSP Male
$209.57
A
361-8000-342-136
12V DC
4.5L/min.
413/60
Viton
Viton
Yes
Continuous
1/2” BSP Male
$301.74
A
361-8002-793-238
12V DC
6.4L/min.
689/100
EPDM
Santo
Yes
Intermittent
3/8” BSP Female
$288.70
A
361-8000-543-138
12V DC
6.4L/min.
689/100
EPDM
Santo
Yes
Intermittent
1/2” BSP Male
$288.70
A
p.62
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
12 Volt Shurflo Pumps
2088 SERIES 12 VOLT DC PUMP
The 2088 series diaphragm pump is an ideal choice for
higher flow applications such as boom spraying and
fluid transfer.
11.3 L/min open flow
CODE
VOLT.
OPEN
FLOW
PRESS.
KPA/PSI
VALVES
MATERIAL
DIAPHRAGM
MATERIAL
PRESS.
SWITCH
DUTY
RATING
PORT
SIZES
LIST
(EX GST)
CAT
361-2088
12V DC
11.3L/min.
310/45
Viton
Santo
Yes
Intermittent
1/2” BSP Male
$252.17
A
FIN COOLED 12 VOLT DC PUMP
Ideal for larger duty cycle application, aluminium heat sink crankcase design
dissipates heat build up from electric motor. Capacity 13.6L/min.
open flow, max. pressure 310 kPa (45 psi).
On/off demand pressure switch, 1/2” Male ports,
Viton valves, Santoprene diaphragm.
CODE
VOLT.
OPEN
FLOW
PRESS.
KPA/PSI
VALVES
MATERIAL
DIAPHRAGM
MATERIAL
PRESS.
SWITCH
DUTY
RATING
PORT
SIZES
LIST
(EX GST)
CAT
361-2088-313-145
12V DC
13.6L/min.
310/45
Viton
Santo
Yes
Cont
1/2” BSP Male
$390.43
A
Ideal for 50, 100 and 200 litre 12 volt units. There are two optional kits for users who require agitation, adjustable spray pressures and flows. A must when using
the 11.3L/min pump for boom spraying and spot spraying. The RP1-24-3 is suitable for mounting to the tank of 12 volt spray units and the RP1-24-4 is suitable
for mounting direct to the base of a stand alone Shurflo pump as well as to Selecta 12 volt spray units, Also available as a bare regulator (9620222).
CODE
RP1-24-3
RP1-24-4
LIST (EX GST)
$173.91
$159.13
CAT
B
B
24 & 240 Volt Shurflo Pumps
24 VOLT DC PUMP
Available in 11.3L/min, 310kPa (45psi) open flow with on/off
demand pressure switch. Compact size 1/2” BSP male ports.
Ideally suited to any machine fitted with 24 volt DC system
eg. bulldozers, trucks and road sweepers.
CODE
VOLT.
OPEN
FLOW
PRESS.
KPA/PSI
VALVES
MATERIAL
DIAPHRAGM
MATERIAL
PRESS.
SWITCH
DUTY
RATING
PORT
SIZES
LIST
(EX GST)
CAT
361-2088-474-144
24V DC
11.3L/min.
310/45
Santo
Santo
Yes
Intermittent
1/2”BSP Male
$299.13
A
240 VOLT AC PUMPS
These durable and efficient positive displacement diaphragm pumps are available in 4.5L/min,
413kPa (60psi). or 4.5L/min, 689kPa (100psi). Open flow with on/off demand pressure switch fitted
as standard. Compact size, 3/8” BSP female ports with diaphragms that are ideally suited to carpet
cleaning applications. (Warning: Must be wired by a certified electrician)
* Port sizes ideal for Carpet cleaning
Pictured: 361-8090-212-246
CODE
VOLT.
OPEN
FLOW
PRESS.
KPA/PSI
VALVES
MATERIAL
DIAPHRAGM
MATERIAL
PRESS.
SWITCH
DUTY
RATING
PORT
SIZES
LIST
(EX GST)
CAT
361-8090-901-248
240V AC
4.5L/min.
689/100
EPDM
SANTO
Yes
Intermittent
3/8”BSP Female*
$320.00
A
361-8090-212-246
240V AC
4.5L/min.
413/60
EPDM
SANTO
Yes
Intermittent
3/8”BSP Female*
$315.65
A
* Supplied standard with filter (as pictured)
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.63
12 Volt Shurflo Pumps
PRESSURE REGULATOR KITS & ACCESSORIES
Born to Perform
Pump Repair Kits
ELECTRIC MOTOR
DRIVE ASSEMBLY KITS
VALVE KITS
UPPER HOUSING
CHECK VALVE KIT
PRESSURE SWITCH
COMPLETE PUMP ASSEMBLY KIT
COMPLETE PUMP ASSEMBLY KITS
CODE
SUITS
381-2000-02
Suit 381-2000 Pak pump
Pump Repair Kits
PRESSURE SWITCH
CODE
SUITS
361-94-375-05
8000 series pumps
with Viton diapgragms
* 8000 series pumps
with Santo diapgragms
8002 series pumps
with Santo diapgragms
8090 series pumps
with Viton diapgragms
8090 series pumps
with Viton diapgragms
^ 2088 series pumps
with Santo diapgragms
2088 series pumps
with Viton diapgragms
2088 series pumps
fin cooled
381-2000 Pak Pump
excludes check valve kit
381-125 Pak Pump
361-94-375-06
361-94-375-18
361-94-229-03
361-94-229-05
361-94-230-35
361-94-230-36
361-94-230-55
381-2000-03
381-125-04
LIST (EX GST)
$42.61
CAT
B
MAX.
PRESSURE
PSI
LIST
(EX GST)
CAT
60psi
$58.26
B
60psi
$55.65
B
100psi
$52.17
B
60psi
$76.52
B
100psi
$71.30
B
45psi
$52.17
B
45psi
$65.22
B
45psi
$63.12
B
60psi
$23.48
B
35psi
$28.70
B
SUITS
361-94-390-05
* 8000 series pumps
Viton valve kit (Black)
8002 series pumps
EPDM valve kit (White)
^ 2088 series pumps viton Valve kit
2088 series pumps Santo
valve kit for 24 Volt model
550 series pump viton Valve kit
551 series pump EPDM valve kit
361-94-390-06
361-94-232-05
361-94-232-00
5503-VHA
5504-VHA
p.64
B
361-94-374-05
361-94-237-05
CODE
SUITS
361-94-378-00
* 8000 series pumps
with 1/2" male ports
8000 series pumps
with 3/8" male ports
^ 2088 series pumps
with 1/2" male ports
2088 series pumps with 1/2”
male ports and Viton pressure switch
2088 DHP with 1/2"
male Ports (non switch end)
2088 DHP with 1/2" male
Ports (includes pressure switch)
550 series pump with 5D quick
connectors (includes pressure switch)
551 series pump with 5D quick
connectors (includes pressure switch)
361-94-379-00
361-94-231-30
361-94-231-05
361-94-231-40
361-94-230-40
5503-UHA
$87.83
B
DRIVE ASSEMBLY KITS
$42.61
B
CODE
SUITS
$87.83
B
361-94-385-32
$38.26
B
$67.92
$67.09
B
B
* 8000 series pumps with Santo
diaphragm made POST March/99
8000 series pumps
made PRE March/99
^ 2088 series pumps
with Santo diaphragm
2088 DHP with Santo diaphragm
550 series pump
with Santo diaphragm
551 series pump with
Santo diaphragm
361-94-385-03
361-94-238-04
361-94-238-03
CAT
5503-LHA
B
5504-LHA
B
B
REF DESCRIPTION
B
361-8-071-00-PK
A
B
361-8-070-01-PK
A
320-60806
C
CAT
$31.30
B
$29.57
B
$30.43
B
$41.74
B
LIST
(EX GST)
CAT
$44.35
B
$33.04
B
$40.00
B
$162.73
B
$30.43
B
$69.57
B
$78.91
B
$81.76
B
LIST
(EX GST)
CAT
$98.26
B
$57.39
B
$62.61
B
$66.09
B
$95.73
B
$94.54
B
ACCESSORIES
CODE
B
LIST
(EX GST)
UPPER HOUSINGS
5504-UHA
HOSE FITTINGS
A
* 8000 series pumps
with EPMD Valve kits
8000 series pumps
with Viton Valve kits
^ 2088 series pumps
with Santo Valve kits
2088 series pumps
with Viton Valve kits
361-94-374-16
LIST
CAT
(EX GST)
DIAPHRAGM KITS (BARE DIAPHRAGM TO SUITE CERTAIN MODELS)
LIST
CODE
SUITS
(EX GST)
361-94-395-05
361-8000-342-136 Viton-Viton pump
$120.87
8000
series
pumps
with
Santo
361-94-395-06
$40.00
diaphragm made PRE March/99
^
2088
series
pumps
361-94-238-04
$62.61
with Santo diaphragm
361-94-238-03
2088 DHP with Santo diaphragm
$66.09
550
series
pump
5503-LHA
$95.73
with Santo diaphragm
5504-LHA
551 series pump with Santo diaphragm $94.54
* Standard to 361-8000
^ Standard to 361-2088
SUITS
361-94-237-00
VALVE KITS
CODE
CHECK VALVE KIT
CODE
361-8-034-PK
B
361-8-060-PK
B
361-8-145-01 †
C
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Hosetail 1/2” female
x 3/8” Barb (2 pack)
Hosetail 1/2” female
x 1/2” Barb (2 pack)
Elbow 3/8” male x 3/8”
Barb (1 pack) Suits 381-2000
Elbow 1/2” female
swivel x 1/2” Barb (2 pack)
Elbow 1/2” female
swivel x 3/8” Barb (2 pack)
Nipple 3/8” male
NPT x 1/2” NPT
LIST
(EX GST)
CAT
$11.30
B
$11.30
B
$4.26
B
$8.43
B
$8.43
B
$4.17
B
† Used to convert pumps with female ports
12 Volt Pumps and Accessories
12 Volt Selecta PAK Pumps
The Selecta Pak Pumps are a positive displacement diaphragm 12-volt pump and can run dry without damage.
All pumps feature an on/off demand pressure switch with standard BSP thread connections or hose barbs.
DRAWING
Pictured: 381-38
Pictured: 381-2000
10292
Pictured: 381-125
VOLT.
OPEN
FLOW
PRESS.
KPA/PSI
VALVES
MATERIAL
DIAPHRAGM
MATERIAL
PRESS.
SWITCH
DUTY
RATING
PORT
SIZE/TYPE
LIST
(EX GST)
CAT
381-38
12V DC
2.4L/min.
240/35
Viton
TPU
Yes
Intermittent
8mm tail
$87.83
A
381-2000
12V DC
5.3L/min
413/60
Viton
Santo
Yes
Continuous
3/8” BSP Female
$176.52
A
381-125*
12V DC
12.5L/min
240/35
Viton
TPU
Yes
Intermittent
12.5mm tail
$176.52
A
381-125-05
Replacement quick connect filter to suit 381-125 Pak Pump (as shown attached)
$12.17
B
* Supplied standard with filter (as pictured)
AQUATEC HIGH CAPACITY 12 VOLT PUMP
This pump is made in the USA, and is ideal for use where higher volume is
required such as boomless nozzle spraying and larger boom spraying (6 metres plus).
Features include:
• 20L/min open flow 60psi (413 kPa)
• Supplied with 12mm and 19mm connectors
• Rated for continuous duty for pressures up to 40psi, above 40psi it has a intermittent duty rating.
• Fitted with ON / OFF demand pressure sensing switch
CODE
VOLT.
OPEN
FLOW
PRESS.
KPA/PSI
VALVES
MATERIAL
DIAPHRAGM
MATERIAL
PRESS.
SWITCH
DUTY
RATING
PORT
SIZE/TYPE
LIST
(EX GST)
CAT
DDP-550
12V DC
20L/min
413/60
Viton
Santo
Yes
Continuous
to 40psi
5D Quick
Connection
$321.74
A
AQUATEC 26.5 L/MIN-12 VOLT PUMP
• Aquatec high capacity 12 volt pump
• 26.5L/Min capacity (open flow)
• 60psi/413kpa max pressure
• EPDM valves and a Santoprene diaphragm
• Positive displacement 5 chamber diaphragm pump
• Supplied with 5D connections- 2 x ½” and 2 x ¾”
• Weight 4.1kg
CODE
VOLT.
OPEN
FLOW
PRESS.
KPA/PSI
VALVES
MATERIAL
DIAPHRAGM
MATERIAL
PRESS.
SWITCH
DDP-551
12V DC
26.5L/min.
413/60
EPDM
Santo
Yes
DUTY
RATING
Continuous
to 10psi
PORT
SIZES
5D Quick
Connection
LIST
(EX GST)
CAT
$499.09
A
Pump Accessories
ACCUMULATOR TANK
FILTER
• Reduces cycling pulsation, and increases
pump life. Helps control and maintain
constant pressure
• Maximum pressure 125psi,
Santoprene diaphragm
• 1/2” BSP male ports
• Inline suction 1/2” female BSP x
1
/2” male BSP
• Stainless steel 50 mesh. Dismantles
easily for cleaning
• Viton O-ring seal
• Fits straight to inlet of Shurflo pumps
CODE
DESCRIPTION
LIST (EX GST)
CAT
CODE
DESCRIPTION
LIST (EX GST)
CAT
361-181-201
Accumulator
$91.30
B
361-255-613-PK
Filter (1 pack)
$20.00
B
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.65
12 Volt Pumps and Accessories
CODE
Nylon & Centrifugal Pumps
Born to Perform
NYLON ROLLER PUMP
The Ferroni nylon roller pump is a low cost alternative pump suitable for high
pressure washing (with or without detergents), transfer of non-corrosive liquids,
watering of small areas and spraying herbicides (NOTE: not suitable for corrosive
chemicals). These pumps can be fitted direct to the PTO of any 540 RPM tractor and
are self-priming.
The ML125 consists of a cast iron housing, rotor with nylon rollers, two hose
connectors and a chain for rigid fastening on to the tractor. It features a brass
pressure regulation valve and rotates in a clockwise direction only. (Note: Not
suitable for abrasive products ie. wettable products). Inbuilt pressure regulator
DRAWING
0112
Nylon & Centrifugal Pumps
CODE
ML125
Service Kit
Code
OPEN
FLOW
MAX PRESS
(BAR)
INLET
(MM)
OULET
(MM)
PRESS.
REG.
R.P.M.
ABSORBED
POWER
L
(MM)
W
(MM)
H
(MM)
WEIGHT
(KG)
LIST
(EX GST)
CAT
180L/min.
25
30mm
19mm
Yes
600
5.5 HP
220
190
250
11
$399.13
A
357-0501
Service kit to suit Nylon Roller Pumps
$133.04
B
9300 HYDRAULIC MOTOR DRIVEN PUMP
• Hydraulic motor drive (for open centre, closed centre and load-sensing systems)
• Viton centrifugal shaft seals and double lip Teflon hydraulic motor seal standard
• 11/2” NPT inlet, 11/4” NPT outlet
• Max. fluid temperature 60º
• C= Cast iron housing and glass filled nylon impeller
• S= Stainless steel housing
• Internal gear gerotor motor
• 1/2” NPT hydraulic ports
Pictured: 9303C-HM4C
Pictured: 9303S-HM4C
OTHER HYPRO PUMPS AVAILABLE. CONTACT SELECTA CUSTOMER SERVICE
CODE
PUMP MAX
HYD. FLOW
MAX PRESS. KPA/PSI
MAX. RPM
WEIGHT (KG)
LIST (EX GST)
CAT
9303C-HM4C
350L/min.
18-30 L/min
655/95
13,780
19.5
$1,582.61
A
9303S-HM5C-SP
350L/min.
45-68 L/min
655/95
13,780
19.5
$2,965.22
A
350L/min.
18-30 L/min
655/95
13,780
19.5
9303S-HM4C (Stainless steel)
SERVICE KIT CODES
$2,113.04
C
3430-0332
Service kit to suit 9303C standard
$97.39
C
3430-0589
Service kit to suit 9303S carbide
$267.83
C
GRAINSAVER
The Grainsaver is a 12 volt DC pump unit ideal for applying nematicides to grain. The twin nozzle
stainless steel spray bar attaches to the auger and is supplied with fan nozzles. The professional
Shurflo pump is mounted to a sturdy base plate and is fitted with a pressure regulator and gauge.
Supplied complete with hoses and on/off switch.
• Professional Shurflo pump 11.3L/min. 310kPa (45psi)
• Teejet pressure regulator
• Glycerine filled pressure gauge
• 3 metres suction hose and filter
• 6 metres of 10 mm I.D. delivery hose
• Twin nozzle stainless steel spraybar
• Supplied with 2 of each TP8006E, TP8008E, TP8010E, TP8015E
nozzles in the kit for different flow rates
DRAWING
0520
p.66
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
CODE
GS01
CAPACITY (OPEN FLOW)
11.3L/min.
LENGTH (MM)
285
WIDTH (MM)
300
HEIGHT (MM)
200
HOSE LENGTH (DELIVERY)
6 metres
LIST (EX GST)
$1,004.27
CAT
A
Sprayer Control Boxes & Valves
* WARNING - Do not operate pumps without appropriate safety guards fitted. ( Not shown or supplied with pumps)
Remote Control Kits
GEOATOM-2 REMOTE CONTROL KIT
+
+
CODE
DESCRIPTION
LIST (EX GST)
CAT
G8409000
Geo Atom 2 control (Hose tails and fittings are required)
$1,678.26
A
Remote Control Kits
Sprayer Control Boxes & Valves
Silvan’s GeoAtom-2 remote control valve kits are used with horticulture and
viticulture sprayers. The valves are operated by a wireless remote key pad that
controls functions such as the master valve, left and right sections and pressure
adjustment. The GeoAtom-2 remote control unit can be mounted in the tractor
cab or taken to the sprayer to test sprayer operations without the need for a
second operator.
• Used to control 2 sections including dump valve, electric pressure regulator
• Pressure compensating section valves
• Kit includes wireless key pad, receiver, wiring loom and electric control valves
• Suited to horticulture and viticulture sprayers
• 30 bar maximum pressure (435psi)
• 150 Lpm maximum flow
GEOCROP REMOTE VALVE KIT
The Geocrop remote control valve kit can be used with broadacre, pasture and row crop sprayers. Valves are operated
via wireless remote key pad and control functions such as the master valve, boom sections and pressure adjustment.
The remote control key pad can be mounted in the tractor cab or taken to the sprayer to test sprayer or nozzle
operations without the need for a second operator.
• Used to control from 3 to 5 sections including master valve and electric pressure regulator
• Pressure compensating section valves
• Kit includes wireless key pad, receiver, wiring loom and electric control valves
• Suited to broadacre and row crop sprayers
• 20 bar maximum pressure (435psi)
• 150 L/m maximum flow
+
+
CODE
DESCRIPTION
LIST (EX GST)
CAT
G8409007
Geo Crop 3 section (Hose tails and fittings are required)
$1,991.30
A
G8409010
Geo Crop 5 section (Hose tails and fittings are required)
$2,347.83
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.67
Sprayer Control Boxes & Valves
Sprayer Control Boxes & Valves
Born to Perform
OPTIONAL BRAVO CONTROLLER
WITH ULTRASONIC TREE SENSORS
The Bravo 140 is the new generation in spray controllers designed to
reduce chemical use and save time and money with less tank refills.
The controllers work in conjunction with ultrasonic sensors mounted at
the front of the sprayer. These sensors detect the tree canopies or trunks
which enables the sprayer to only spray the target and not the spaces in
between.
The controller also monitors the speed travelled, and gives an accurate
record of the area sprayed, number of sprayed trees and rate of
application for spray diaries.
The Bravo 140 controls up to 2 ultrasonic sensors and 2 sections
CODE
DESCRIPTION
LIST (EX GST)
CAT
46714231
Control Box without sensors
$1,469.57
A
46713000-100
Ultra sonic sensor up to 6.5m Range
$913.04
C
118-447
Ultra sonic sensor up to 3.4m Range
$913.04
C
467100-086
Inductive speed sensor with 5m cable
$224.35
C
HORT
ICULT
URE
E
DACR
BROA
BRAVO 180 RATE CONTROLLERS
The Bravo 180 comes as a horticulture or broadacre
spray rate controller. They are compact and easy to use,
and ensure precise product delivery.
• Display of application rate (l/ha), speed, area, spray volume,
tank level, flow rate (l/min), field number, operating time and
covered distance
• Automatic adjustment of spray application rate by
measuring flow and speed
• Horticultural model controls up to 4 sections
• Broadacre model controls up to 5 sections
• Kit includes control box, tractor loom, sprayer loom and
speed sensor
• Optional valves and flow meter
CODE
DESCRIPTION
LIST
(EX GST)
46718301
3 Section Broadacre
$1,478.26 A
46718451
4 Section Horticulture
$1,800.00 A
p.68
Pictured: Bravo 180 horticulture
model connectivity
CAT
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Pictured: Bravo 180 broadacre
model connectivity
Sprayer Control Boxes & Valves
NG
COMPU
TER
3
2
HYDRA
ULIC
CONTR
UNITOL
Pictured: Bravo 300S model connectivity
BRAVO 300S/RCU RATE CONTROLLERS
Pictured: Bravo 300S RCU model connectivity
The Bravo 300S & 300S RCU takes top spot for spray rate control, ensuring constant and precise product delivery. With SD memory card
for storing work reports and a full range of software options, the Bravo 300S series makes spraying safer and more efficient.
• Simultaneous display of application rate (l/ha), speed, area, spray volume, tank level, flow rate (l/min), field number, operating time and covered distance
• Automatic control by flow rate and/or pressure detection either through flow meter or pressure sensor
• Both configurations suit horticulture or broadacre applications
• 300S model controls up to 5 sections
• 300S RCU model controls up to 5 sections & 7 hydraulic functions
• Removable Secure Digital (SD) memory card to store work reports
• Kit includes control box, tractor loom, sprayer loom and speed sensor
• Optional valves and flow meter
CODE
DESCRIPTION
LIST (EX GST)
CAT
46731401
4 Section Horticulture
$2,930.43
A
46730501
5 Section Broadacre
$2,930.43
A
OPTIONS
VACUMN MOUNT
For Bravo 180-300s controllers
• Twin ball join arm designed
to be adjusted to any direcction
• Strong construction with
a vibration damping
FOAM MARKER
CONNECTING KIT
It runs directly of the Bravo
180-300s controllers
CODE
DESCRIPTION
LIST (EX GST)
CAT
CODE
DESCRIPTION
LIST (EX GST)
CAT
520005C-100
Foam marker connecting kit
$283.48
A
467040-650
Vacumn mount bracket
$154.47
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.69
Sprayer Control Boxes & Valves
SPRAYI
Pressure Control Kits
Born to Perform
3 SECTION & PRESSURE
2,3 & 5 SECTION & PRESSURE
• Control box
• 2 on/off section and master on/off
• Pressure adjustment
• 20 bar pressure gauge
• Suitable for motor valves not solenoids
Pressure Control Kits
• Control box
• 2 on/off section and master on/off
• Pressure adjustment
• No gauge
• Suitable for motor valves not solenoids
CODE
DESCRIPTION
LIST (EX GST)
CAT
G8406006
2 section control box with tractor loom
$258.26
A
G8406003
3 section control box
$391.30
A
G8406010
5 section control box
$395.65
A
GC00900011
5 section 5m tractor loom
$185.22
A
GC00900009
5m sprayer loom 2& 3 section
$152.17
C
HECTARE METER
• Adjustable width setting
• Speed display in Km/h or Mph
• Includes inductive wheel sensor
• Backlight display for night viewing
CODE
DESCRIPTION
LIST (EX GST)
CAT
ATV-12
Hectare meter
$513.04
A
2 OR 3 SECTION
• Control box
• On/off section for 2 wire motor valves
• 5 metre cable
p.70
CODE
DESCRIPTION
LIST (EX GST)
CAT
46615200
2 section control box
$150.43
A
46615330
3 Section control box with PRV switch
$280.00
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Electric Valves
ELECTRIC ON/OFF SECTION
DRAWING
5095
Electric 12-volt on/off boom section.
CODE
MAX PRESSURE
OPENING TIME
POWER
FLOW L/MIN
Ø OUT
LIST (EX GST)
CAT
G8388000
2000kPa/290psi
0.35 Sec
0.5A
24
1/2”
$266.09
C
MAIN CONTROL VALVE
Main control valve with adjustable pressure relief valve, 12-volt.
CODE
MAX PRESSURE
OPENING TIME
POWER
FLOW L/MIN
Ø IN
Ø BYPASS
LIST (EX GST)
CAT
471502
2000kPa/290psi
0.6 Sec
0.5A
150
1”
30mm
$375.65
C
PROPORTIONAL CONTROL VALVE
DRAWING
Proportional Control Valve regulates flow in proportion to pump capabilities, 12-volt.
A
CODE
MAX PRESSURE
G8386005
4000kPa/580psi
F
M
OPENING TIME
14 Sec
0638
FLOW L/MIN
Ø BYPASS
LIST (EX GST)
CAT
150
1”
$280.00
C
Electric Valves
B
F
C
G
CODE
463000-920
G8392036
463000-970
G8392037
NO. VALVES
2
3
7
4
LENGTH
150mm
207mm
436mm
265mm
LIST (EX GST)
$23.48
$58.26
$45.22
$66.09
CAT
C
C
C
C
N
H
D
VALVE ADAPTORS
CODE
F
F
F
F
MALE ADAPTORS (A)
(EX GST) CAT
$11.30
C
GF00102014 3/4” (BSP) Brass
$36.52
C
463000-140 1” (BSP) Nylon
$11.30
C
CODE
FEMALE ADAPTOR (B) (EX GST)
CAT
463000-132 3/4” (BSP) Nylon
$11.30
C
CODE
(EX GST)
CAT
$5.83
C
(EX GST)
CAT
$19.13
C
END CAP (C)
463011-120 Nylon
PRESSURE GAUGE
CODE
ADAPTOR (D)
463011-130 1/4” (BSP) Nylon
GF00102015 Brass gauge adaptor
$22.61
C
CODE
(EX GST)
CAT
$36.52
C
$13.04
C
MALE ADAPTORS (E)
463000-040 1” (BSP) Nylon
M
0110
463000-130 3/4” (BSP) Nylon
M GF00102017 3/4” (BSP) Brass
M
DRAWING
CODE
FEMALE ADAPTOR (F) (EX GST)
CAT
463000-032 3/4” (BSP) Nylon
$11.30
CODE
(EX GST)
CAT
$5.83
C
$3.57
C
END CAP (G)
463011-110 Nylon
N G10071V
O’ Ring
C
MANUAL PRESSURE RELIEF VALVE
Manual diaphragm pressure relief control
valve with flanged coupling.
CODE
MAX PRESSURE
DRAWING
5213
FLOW L/MIN Ø BYPASS
LIST (EX GST) CAT
G8384018 2000kPa/290psi
200
3/4” BSPM
$153.04
C
465522
200
1” BSPM
$159.13
C
2000kPa/290psi
MANUAL ON/OFF SECTION
DRAWING
Manual boom section on/off tap.
0522
CODE
MAX PRESSURE
FLOW L/MIN
Ø OUT LIST (EX GST)
CAT
G8388006
2000kPa/290psi
24
1/2”
C
CODE
GR00000015
463001-A19
463001-A25M
CODE
GR00000066
HOSETAILS (H)
13MM
19MM
25mm
FEMALE OUTLET (I)
Brass 1/2” BSP
$39.13
(EX GST)
$6.70
$11.30
$11.30
(EX GST)
$13.04
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
CAT
C
C
C
CAT
C
p.71
Electric Valves
MOUNTING KITS
E
Born to Perform
GPS
MATRIX 570G CONSOLE
Choice of Guidence Style
Complete GPS Guidence system designed to provide enhanced visual
guidence on screen (plus lightbar) for day/night operations. Enhance
your accuracy with D-GPS (where available), USB connectivity for
generating reports that can show you where you have sprayed, area
covered and time spent (or rather saved with the Matrix). Connect a
camera for a useful Heads-up-Display and visually see your accuracy
(or position to monitor mard to see machine parts or booms).
• 570= 5.7” Display; G= Guidance
• Touch screen control makes operation easy
• USB port for data export & software updates
• Built-in Lightbar for full-time guidance, no matter what is on display
• Standard RAM bracket for easy mounting
-1
• Bright, screen viewable under tough lighting conditions
Swath
• Standard GPS antenna connection
• Rubber USB port cover
• Integrated RAM mount
• Rubber connector covers
• Recessed connectors for better clearance
• Clearpath patch antenna
Straight A-B Guidance
Curved A -B Guidance
3.2
8.96
acres
Circle Pivot Guidance
Last Pass Guidance
CODE
DESCRIPTION
LIST (EX GST)
CAT
90-02602
Matrix 570G Guidence system
$3,469.57
A
90-02556
Matrix 570G Guidence system + Camera
$3,591.30
A
CENTERLINE 220 COMPACT GUIDANCE
GPS
This complete guidance system is designed to let you take
advantage of GPS lightbar guidance for any field operation.
Inside the conveniently sized guidance system is a high-quality
GPS receiver and the guidance capabilities that make Teejet
leaders in lightbar guidance.
• Ideal as a Foam Marker replacement on Broadacres and also for use with
Fertiliser spreaders
• Versatile GPS guidance in a compact, portable package
• Simple setup takes seconds- just plug it in, enter swath width and go
• Traditional lightbar guidance plus a large graphical display
providing complete guidance information
• High-quality Internal GPS engine with external antenna
• Straight-line (parallel) and curved AB modes of operation
• Return to point feature
• Durable, sealed rubber keypad is easy to see and provides good
tactile feedback for the operator
• Provides RADAR-like speed signal for use with other control and monitors
• Built in look-ahead logic keeps you on track at any speed
Patch Antenna
Centerline 220
Map Curved AB
Set Swath Width
Return to point
Map Path AB
Map Straight AB
CODE
DESCRIPTION
LIST (EX GST)
CAT
90-02401
Centerline 220 Guidance
$1,973.91
A
p.72
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Solenoids
Solenoids offer the advantages of instant response and the ability to remain
in an energised (open) state indefinitely without overheating or failing. When
controlling uni-directional fluid flows (1 way) the valve is normally closed,
however, on command, it employs inlet pressure to provide servo-assistance
opening which means a rapid response and low energy requirements.
FOAM MARKER/SPRAYER SOLENOID VALVE
Suits 12-volt and 24-volt. 3/4” threaded inlet and outlet
Pictured: JA-1502003
1
CODE
DESCRIPTION
MAX PRESS
KPA/PSI
FLOW
L/MIN
LIST
(EX GST)
CAT
JA-1502003
Solenoid ideal for foam markers
800/116
37
$46.09
C
2
ELECTRIC SOLENOID
Construction features brass body, stainless
steel inner components, teflon diaphragm and
standard BSP threads.
REF
MAX PRESS
KPA/PSI
FLOW
L/MIN
PRESSURE LOSS
ACROSS VALVE
PORT SIZE
BSP
ELECT.
REQ.
L
(MM)
W
(MM)
H
WEIGHT
(MM) (G)
LIST
(EX GST)
CAT
472-62
1
1600/232
105
1 BAR
3/4” Female
12V DC
85
45
90
670
$310.43
C
G8388012
2
4000/580
80
1 BAR
1/2” Female
12V DC
90
50
125
1030
$297.39
C
$28.70
C
SERVICE KIT CODE
GK99900045
Diaphragm to suit G8388012
TEXAS ELECTRIC SOLENOID
1
2
Direct operating valves can be used for foam
and dye markers, small sprayers, boom
end nozzles, chemical injection systems,
individual nozzle shut-off and more.
Direct acting solenoid valves are ideal for
high volume applications where a minimum
pressure loss is required. Viton diaphragm
and seals as standard on both solenoids.
DRAWING
DRAWING
0611
0720
0421
CODE
REF
MAX PRESS
KPA/PSI
FLOW
L/MIN
PRESSURE
LOSS ACROSS VALVE
SIZE BSP
ELECTRICAL
REQUIREMENT
2100B-1
1
800/116
38
5 psi
3/4” inlet - 1/2” outlet
12V DC
65
1999A-1
2
600/87
68
5 psi
1” Female/Male
12V DC
110
TC-2517
Service kit to suit Texas Electric Solinoid (1999A-1)
L
W
(MM) (MM)
H
(MM)
WEIGHT
(G)
LIST
(EX GST)
CAT
80
120
630
$301.74
C
105
140
490
$369.57
C
$139.13
C
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.73
Solenoids
CODE
Born to Perform
Solenoids
DIRECTOVALVE CONTROL VALVES
• Direct acting, large internal flow chamber without pilot
hole reduces chance of clogging
• Stainless steel wetted parts provide additional corrosion resistance
• Operation on 12 volt DC system
• Encapsulated solenoid coil can be changed without removing valve from system
• EPDM diaphragms and seat washer, Viton optional
• Continuous flow through bypass connection, with flow to spray line controlled by valve “on-off” action
AA144A DIRECTOVALVE CONTROL VALVE
• 37.9 L/min flow with only 0.35 bar pressure drop
• Can be joined with other 144A Directovalve control valves
• 2.5 amp current draw
• Polypropylene body for chemical resistance
• Fabric reinforced diaphragms
• Also available as 2-unit or 3-unit assembly. CODE: AA144A-2 or AA144A-3
DRAWING
0421
INLET SIZE
OUTLET SIZE
FLOW RATE AT 0.35
PRESSURE DROP
MAX PRESS
KPA/PSI
CURRENT
DRAW
3/4”
3/4”
1/2”
37.9 L/min.
700/102
2.5 amp
$185.22
C
PK-AB144A-1-KIT
Standard Service Kit to suit Directovalve Control Valve
$41.74
C
PK-AB144A-1-VI-KIT
Viton Service Kit to suit Directovalve Control Valve
$69.57
C
CODE
AA144A-1
SERVICE KIT CODE
LIST
(EX GST)
CAT
* Viton option
AAB144P DIRECTOVALVE CONTROL VALVE
Solenoids
• 37.9 L/min flow with only 0.35 bar/5 psi pressure drop
• 2.5 amp current draw
• Polypropylene body for chemical resistance
• Fabric reinforced diaphragms
• No stroke adjustment required
• Corrosion-resistant. 430SS Solenoid Grande armature and armature stop
• Encapsulated coil and magnetic circuit
CODE
DRAWING
0525
INLET
SIZE
OUTLET
SIZE
FLOW RATE AT 0.35
PRESSURE DROP
MAX PRESS
KPA/PSI
CURRENT
DRAW
LIST
(EX GST)
CAT
1/2”
37.9 L/min.
700/102
2.5 amp
$276.52
C
$69.57
C
AAB144P-1
3/4”
3/4”
SERVICE KIT CODE
PK-AB144P-1-KIT
Service Kit to suit Direct to valve Control Valve
1
2
3
4
GOYEN ELECTRIC SOLENOID VALVE
Comprises a nylon body with either 1/2” x 1/2” barb, or 1/2” barb x 3/4” BSP thread, and is a
servo-assisted solenoid. Ideal for fitting to single spray bars. Viton diaphragms.
Note: Available in twin packs. Add “- PK” to end of code eg. 042-1-ST2-HR-PK
CODE
DESCRIPTION
LIST (EX GST)
CAT
042-1-047K
Goyen Solenoid repair kit
$86.96
C
CODE
REF
MAX PRESS
KPA/PSI
FLOW
L/MIN
PRESSURE LOSS
ACROSS VALVE
SIZE BSP
ELECTRICAL
REQUIREMENT
L
(MM)
042-1-ST2-HR
1
1000/145
65
114kPa/5psi
1/2” X 1/2” Barbs
12V DC
90
70
50
042-1-ST2-6R
2
1000/145
65
114kPa/5psi
1/2” Barb X 3/4” BSP
12V DC
90
70
50
042-1-ST-HV
3
1000/145
65
114kPa/5psi
1/2” X 1/2” Barbs
12V DC
90
70
042-1-ST2-6
4
1000/145
65
114kPa/5psi
1/2” Barb X 3/4” BSP
12V DC
90
70
p.74
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
W
(MM)
H
WEIGHT
(MM) (G)
LIST
(EX GST)
CAT
200
$141.74
C
200
$141.74
C
50
200
$141.74
C
50
200
$141.74
C
Control Valves & Relief Valves
NYLON PRESSURE RELIEF VALVE
HIGH FLOW PRESSURE
RELIEF VALVE
• Stainless steel spring
• Excellent chemical resistance
• Extra 1/4” female port for pressure gauge
• Positive lock nut to hold adjuster
at your desired setting
• Excellent value for money
• Optional Viton internals for chemical resistance
Made from nylon and aluminium, it
has a chemical resistant diaphragm
that seals off operating parts from
contact with chemicals and remains
resilient for chatter free,
responsive pressure control.
Complete with extra 1/4” gauge port.
Maximumflow rate 212 L/min for 1/2”
and 265 L/min. for 3/4”.
DESCRIPTION
MAX PRESS
KPA/PSI
LIST
(EX GST)
CAT
8460-1/2-50
Relief valve, 1/2”
350/51
$106.96
C
8460-1/2
Relief valve, 1/2”
2000/290
$99.13
C
8460-3/4-50
Relief valve, 3/4”
350/51
$106.96
C
8460-3/4
Relief valve, 3/4”
2000/290
$100.87
C
DESCRIPTION
MAX PRESS
KPA/PSI
LIST
(EX GST)
CAT
23120A-1/2-PP
Relief valve, 1/2”,
Viton Equipped
700kPa/102psi
$99.13
C
23120-1/2-PP
Relief valve, 1/2”
700kPa/102psi
$66.09
C
23120A-3/4-PP
Relief valve, 3/4”,
Viton Equipped
700kPa/102psi
$99.13
C
23120-3/4-PP
Relief valve, 3/4”
700kPa/102psi
$66.09
C
Display can be rotated in
4 different positions
ELECTRIC INLINE UREA FLOW METER
Easy to install, in line or at the end of the delivery hose, it is provided with a compact easy
readable display with batteries that can be easily replaced. It is possible to apply the meter
directly on the nozzle. Accuracy ±1% after of calibration.
• Operating pressure 10 bar (145 PSI)
• Bursting pressure 40 Bar
• Working temperature -10/50°C
• Inlet 1” female BSP, outlet 1” male BSP
• Flow rate 5-100 L/min, can be calibrated
• Precision ± 1% within the flow range
• Size 100x70x55mm
CODE
DESCRIPTION
LIST (EX GST)
CAT
F00407090
Electric inline Urea flow meter
$388.70
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.75
Control Valves & Relief Valves
CODE
CODE
Born to Perform
Diesel Tanks
Selecta Polytuff Diesel Tanks are constructed for the Toughest Australian conditions. Manufactured with a unique Diesel grade
polyethylene that is UV Stabilised and Impact resistant. Each tank is a product of careful testing and manufacture to ensure a Strong,
durable and maintenance free tank. A wide range of a Freestanding Polytuff Diesel Tanks are available from 100 to 2200 Litres.
100 LITRE DIESEL TANK CODE: 430-0100F
BAFFLED TANK
BAFFLED TANK
300 LITRE DIESEL TANK CODE: 430-0300F
BAFFLED TANK
Diesel Tanks
200 LITRE DIESEL TANK CODE: 430-0200F
BAFFLED TANK
BAFFLED TANK
200 LITRE DIESEL TANK CODE: 430-200H
CODE
CAPACITY
LITRE
DECRIPTION
MOUNTING
430-0100F
400 LITRE DIESEL TANK CODE: 430-0400F
BAFFLED
LID DIA
(MM)
FILL DROP
TUBE
LENGTH
(MM)
WIDTH
(MM)
HEIGHT
(MM)
WEIGHT
(KG)
LIST
CAT
BAFFLED TANK
(EX
GST)
100
Dieselpak
100
No
660
580
490
10
$380.87
A
430-0200F
200
100
No
1030
580
535
12
$409.57
A
430-200H
200**
100
No
1100
640
550
13
$513.04
A
Yes
100
Yes
1060
900
530
23
$721.74
A
Yes
100
Yes
1060
900
650
32
$852.17
A
430-0300F
300 †
Dieselpak
Low Profile
Dieselpak
Dieselpak
430-0400F
400 †
Dieselpak
Options
LOCKABLE FILLING CAP
OPTIONAL 8MTR OR 10MTR
RETRACTABLE REELS AVAILABLE
* Supplied with 8mm brass insert mountings in base. ** Supplied with lockable filling cap † Tank fitted with baffles
p.76
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
DIESELPAK BAFFLING
FOAM AVAILABLE
Diesel Tanks
BAFFLED TANK
BAFFLED TANK
580mm
BAFFLED TANK
400mm
600 Litre Unit
400 Litre Unit
400 LITRE DIESEL TANK CODE: 430-0400H OR 600 LITRE CODE: 430-0600H (pictured)
Basic Skid
Long Skid
Code: 430-113
Code: 430-114
1000 LITRE DIESEL TANK CODE: 430-1000V
BAFFLED TANK
Diesel Tanks
Tw in
Pictured: 430-0800F features
mounting areas for hose reels
BAFFLED TANK
BAFFLED TANK
800 LITRE DIESEL TANK CODE: 430-0800F
2200 LITRE DIESEL TANK CODE: 430-2200F
CODE
CAPACITY
LITRE
DECRIPTION
MOUNTING
BAFFLED
LID DIA
(MM)
FILL DROP
TUBE
LENGTH
(MM)
WIDTH
(MM)
HEIGHT
(MM)
WEIGHT
KG
LIST
(EX GST)
CAT
430-0400H
400 †
Low Profile Dieselpak
Yes
-
Yes
1700
820
550
28
$904.35
A
430-0600H
600 †**
Low Profile Dieselpak
Yes
122
Yes
1664
841
750
33
$1,295.65
A
430-0800F
800 †
Dieselpak
Yes
122
No
1800
940
760
59
$1,356.52
A
430-1000V
1000
Diesel Tank
122
No
1500
1180
900
45
$1,373.91
A
430-113
Basic Skid
1400
1160
140
35
$582.61
A
430-114
Long Skid***
1730
1160
140
50
$765.22
A
1900
1380
1150
81
$2,018.18
A
*** Area on skid for mounting a pump and or hose reel
430-2200V
2200
Diesel Tank
ELECTRONIC LITRE COUNTER
STANDARD ON ALL MODELS
122
OPTIONAL SKIDS FOR 1000L TANKS
INCLUDE 4 MOUNTING BRACKETS
FOR TANK FEET
No
Kit of 4 mounting brackets without skid
to suit 1000L and 2200L tanks (enquire
using code 033-999-KIT)
WARNING-Refer to vehicle or tractor manufacturer’s instructions for appropriate
load and towing limits and fitting positions. Never fill the spray tank capacity
to exceed the vehicle or tractor manufacturer’s specified safe load carrying
capacities. Note: 1 litre of water = 1kg
† Tank fitted with baffles ** Supplied with lockable filling cap
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.77
Born to Perform
Polytuff Tanks
Polytuff Tanks
Accessories
available
20 LITRE SPOTPAK CODE: 430-20S
100 LITRE UTEPAK CODE: 430-0100AW
30 LITRE FOAM MARKER CODE: 425-30
200 LITRE UTEPAK CODE: 430-0200A
70 LITRE BARE RAKPAK PLUS 70 CODE: 430-70N
200 LITRE UTEPAK CODE: 430-0200AW
100 LITRE UTEPAK CODE: 430-0100A
300 LITRE SQUATPAK CODE: 430-0300E
BAFFLED TANK
CODE
CAPACITY
LITRE
DECRIPTION
MOUNTING
LID DIA
(MM)
LID
STRAINER
LENGTH
(MM)
WIDTH
HEIGHT
WEIGHT
(MM) BAFFLED
(MM)TANK KG
LIST
(EX GST)
CAT
430-20S
20
Spotpak
122
No
550
280
250
3
$98.26
A
430-50S
50
Spotpak
175
No
700
420
300
5
$165.22
A
430-100S
100
Spotpak
175
No
800
475
395
9
$281.74
A
430-200S
200
Spotpak
175
No
1000
550
520
14
$398.26
A
425-30
30
Foam Marker
11/4” BSP
No
300
300
620
4.5
$192.17
A
430-70N
70**†
Bare Rakpak Plus 70
175
No
800
850
290
7.5
$327.83
A
430-0100A
100*
Utepak
265
Yes
660
580
490
8
$368.70
A
430-0100AW
100*
Utepak White
265
Yes
660
580
490
8
$360.87
A
430-0200A
200*
Trukpak
265
Yes
1030
580
535
13
$432.17
A
430-0200AW
200*
Trukpak White
265
Yes
1030
580
535
13
$430.43
A
430-0300E
300 †
Squatpak
120
No
1060
900
530
23
$643.48
A
* Supplied with 8mm brass insert mountings in base.
** Supplied with tank straps. † Tank fitted with baffles
p.78
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
BAFFLED TANK
Polytuff Tanks
Basic Skid
Long Skid
Code: 430-113
Code: 430-114
1100 LITRE FREESTANDING CODE: 430-1000U
Polytuff Tanks
BAFFLED TANK
400 LITRE SQUATPAK CODE: 430-0400E
BAFFLED TANK
BAFFLED TANK
Tw in
BAFFLED TANK
800 LITRE SQUATPAK CODE: 430-0800E
CODE
CAPACITY
LITRE
DECRIPTION
MOUNTING
2200 LITRE FREESTANDING CODE: 430-2200
LID DIA
LID
LENGTH
(MM)
STRAINER
BAFFLED
TANK(MM)
WIDTH
(MM)
HEIGHT
(MM)
WEIGHT
KG
LIST
(EX GST)
CAT
430-0400E
400 †
Squatpak
240
No
1060
900
650
27
$730.43
A
430-0800E
800 †
120
No
1800
940
760
46
$1,156.52
A
430-1000U
1100
BAFFLED
TANK1500
Yes
1180
900
45
$1,260.87
A
430-113
Squatpak
Freestanding
Tank
Basic Skid
1400
1160
140
35
$582.61
A
430-114
Long Skid***
1730
1160
140
50
$765.22
A
1900
1380
1150
81
$2,104.35
A
455
*** Area on skid for mounting a pump and or hose reel
430-2200
2200
Tank
455
Yes
† Tank fitted with baffles
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.79
Born to Perform
Ropewick Stick & Wick
GARDEN WICK STICK
The successful wick wiping method has also been adapted to general garden use in an easy to handle, rake-size
applicator. Its simple design allows liquid to flow from a long re-fillable P.V.C. handle into a Pistachio wick head
that in turn applies a lethal dose to weeds. One wipe does it all.
CODE
DESCRIPTION
CAPACITY
WICKS
FLOW RATE
LENGTH
(MM)
WIDTH
(MM)
HEIGHT
(MM)
WEIGHT
(KG)
LIST
(EX GST)
CAT
489
Garden Wick Standard
600 ml
1
Adjustable
1260
280
1260
0.42
$163.48
A
WICK & FITTINGS
Ropewick Stick & Wick
Ropewick assembly is available in 14” and 24” lengths complete
with compression grommet and sealing nut.
CODE
DESCRIPTION
WICKS
FLOW RATE
LENGTH (MM)
LIST (EX GST)
CAT
489-1
Wick & fittings (Standard)
1
Adjustable
360
$27.83
C
489-1-C
Wick & fittings (Multiple)
1
Adjustable
610
$30.43
C
Spray Guns
1
DRAWING
Selecta sprayguns are designed to help reduce
fatigue whilst hand spraying. Popular with
farmers, orchardists and contractors they are
manufactured in a range of materials from
stainless steel, brass and polypropylene.
10472
DRAWING
10473
2
PA SPRAY GUN
DRAWING
3
• On/off trigger grip action with lock off position
• Fibreglass reinforced body
10474
CODE
REF
DESCRIPTION
HOSE SIZES
(MM) I.D.
LENGTH
(MM)
WEIGHT
(GRAMS)
MAX PRESS.
KPA/PSI
LIST
(EX GST)
CAT
410-34
1
500mm s/steel lance, cone and fan nozzle
10/12.5
700
420
2000/290
$107.83
A
410-30
2
200mm poly lance & adj. brass nozzle
10/12.5
430
320
2000/290
$98.26
A
410-38
3
Spraygun with adj. brass nozzle
10/12.5
230
350
2000/290
$112.17
A
PARTS CODE
410-36
Replacement s/steel lance to suit 410-34 PA spray gun
$60.00
A
SERVICE
KIT CODE
5500-PPB-X12
Replacement adjustable poly nozzle to suit 410-34 PA spray gun
$13.91
A
410-30000224
Service kit to suit PA Series Spray Guns (No spring included)
$46.09
A
GUNJET 30 SPRAY GUN
The Gunjet 30 spraygun is ideal for all types of spraying. Both
sprayguns are durable and designed for excellent corrosion
resistance. The AAB30L-1/4 body and trigger are moulded from
tough nylon and the AAB30L-PP from polypropylene.
1
2
* To order: Specify lance extension size (inches). See below.
DRAWING
DRAWING
0599
0600
4
3
INLET
CONNECTION
LENGTH
(MM)
WEIGHT
(GRAMS)
MAX PRESS.
KPA/PSI
LIST
(EX GST)
CAT
19L/min.
$107.83
A
19L/min.
$86.96
A
18 - 48 Curved extension with fixed body
*from $30.00
A
12 - 48 Straight extension
*from $24.55
A
Brass hosetail 1/4 “Male x 3/8 “ Barb
$2.87
A
CODE
REF
AAB30L-1/4
1
1/4” BSPT (F)
160
436
1724/250
AAB30L-PP
2
1/4” BSPT (F)
160
370
1034/150
6671-*
3
7715-*
4
474-191
474-200
SERVICE KIT CODE
p.80
MAX
FLOW RATE
Brass hosetail 1/4 “Male x 1/2 “ Barb
$2.78
A
AB30L-KIT
Service kit to suit Gunjet 30 (AAB30L - 1/4)
$22.61
A
PK-AB30L-PP-KIT
Service kit to suit Gunjet 30 (AAB30L - PP)
$24.35
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Spray Guns
A. 390mm barrel
DRAWING
10554
B. 115mm barrel
DRAWING
10703
TRIAM 49 SPRAY GUN
With a sturdy stainless steel/brass barrel, these Triam spray guns are ideal for most spraying
applications. A polypropylene handgun construction helps reduce fatigue. Trigger controlled spray pattern,
adjustable from a wide cone to a straight stream (410-12 and 410-49), hose swivel, and cone and fan
nozzle standard.
CODE
REF
DESCRIPTION
HOSE SIZES
(MM) I.D.
LENGTH
(MM)
WEIGHT
(GRAMS)
MAX PRESS.
KPA/PSI
LIST
(EX GST)
CAT
410-12
A
Maxi Triam 44 Spray Gun
10/12.5
620
1020
4000/600
$180.87
A
Triam 49 Spray Gun
10/12.5
305
650
4000/600
410-49
B
$148.40
A
5500-X12
Optional brass adjustable nozzle to suit 410-12 and 410-49 Triam 49 spray gun
$29.57
C
SERVICE KIT CODE
401-45BR
$30.43
C
Service kit to suit Triam 44 Spray Guns
VARIJET SPRAY GUN MKII
DRAWING
• Spray pattern changes by rotating gun barrel
• On/off trigger grip action with lock off position
• Designed to reduce fatigue while spraying
• Fits to 10mm and 12.5mm hose
• Hose swivel Included
CODE
DESCRIPTION
HOSE SIZES
(MM) I.D.
LENGTH
(MM)
WEIGHT
(GRAMS)
MAX PRESS.
KPA/PSI
LIST
(EX GST)
CAT
410-43
Varijet Spray Gun with adjustable spray pattern
10/12.5
293
500
2500/365
$160.00
A
SERVICE KIT CODE
410-30000224
$46.09
C
Service kit to suit PA Series Spray Guns (No spring included)
GUNJET 43 SPRAY GUN
A heavy duty robust spray gun ideal for professional
contractors and for spraying blackberrys and Pattersons Curse.
Stem extends through extension to valve seat located directly
behind orifice disc for drip-free shutoff and instant operating
response. Convenient trigger-lock for continuous spraying.
Pictured: AAB43HA-8 spraygun
CODE
INLET
CONNECTION
LENGTH
(MM)
WEIGHT
(KG)
MAX PRESS.
KPA/PSI
MATERIAL
LIST
(EX GST)
CAT
AAB43LA-8
1/2” BSPT (F)
330
1.30
1400/203
Brass
$182.61
A
AAB43HA-8
1/2” BSPT (F)
330
1.30
5500/797
Brass
$190.43
A
AAB43LA-AL8
1/2” BSPT (F)
330
1.00
1400/203
Aluminium
$190.43
A
AAB43HA-AL8
1/2” BSPT (F)
330
1.00
5500/797
Aluminium
$190.43
A
474-209
Hosetail 1/2 “Male x 3/8 “ Barb
Brass
$9.57
C
Hosetail 1/2 “Male x 1/2 “ Barb
Brass
474-207
SERVICE KIT CODE
$6.43
C
PK-AB43-KIT
Service kit to suit Gunjet 43 (Brass)
$58.26
B
PK-AB43-AL-KIT
Service kit to suit Gunjet 43 (Aluminium)
$58.26
B
For a range of nozzles and spray gun accessories refer to page 84
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.81
Spray Guns
10533
Lightweight, Corrosion resistant ergonomical design, sprays
from straight stream to conical mist
Born to Perform
Spray Guns
LONG RANGER SPRAY GUN
Features quick release trigger lock, nozzle protector,
adjustable spray pattern and two handed grip. Ideal
for applications where volume and long distance
up to 25 metres is required eg. tree spraying, fire
fighting white wash, wash down. Supplied with hard
wearing tungsten nozzle. On/off trigger and locking
device. Ideal for cleaning chicken sheds
Adjusts pattern
DRAWING
0095
CODE
HOSE SIZES (MM) I.D.
LENGTH (MM)
WEIGHT (GRAMS)
MAX PRESS. KPA/PSI
LIST (EX GST)
CAT
002201
12.5 mm I.D.
700
1640
5000/725
$288.70
A
FLASH SPRAY GUN
Spray Guns
Ideal for almost any spray application. Features ceramic 2.5mm
nozzle as standard with kit of spare nozzles built into gun,
adjustable spray pattern from straight stream to conical mist,
safety adjustment lever pin and 1/2” BSP hose swivel as standard.
DRAWING
5102
CODE
HOSE SIZES (MM) I.D.
LENGTH (MM)
WEIGHT (GRAMS)
MAX PRESS. KPA/PSI
LIST (EX GST)
CAT
411-21
12.5
12.5 20
570
5000/725
$99.13
A
TURBO 400 SPRAY GUN
Pictured: 411-22
Constructed from high impact chemical resistant plastic with
stainless steel and brass components. Features include spring
loaded adjustable spray lever with variable spray control from
misting to spot spraying and a trigger locking device. The
Airvac nozzle shroud atomiser ensures a very fine mist with
excellent leaf coverage and reduction of droplet
leakage when operating from 1500kPa (225psi) upwards.
Supplied complete with hose swivel. Replacement nozzles
available ranging from 1.0mm to 4.0mm (MA7-10 to 40)
DRAWING
10706
DRAWING
10715
Pictured: 401-26BRQS
CODE
HOSE SIZES (MM) I.D.
LENGTH (MM)
WEIGHT (GRAMS)
MAX PRESS. KPA/PSI
LIST (EX GST)
CAT
411-22
10/12.5
440
700
5000/725
$164.35
A
440
700
5000/725
$170.43
A
$83.48
C
OPTIONAL STEEL
HANDLE TURBO 400
401-26BRQS
10/12.5
SERVICE KIT CODE
401-26BR-001
Service kit to suit Turbo 400 Spray Gun
NEHRO SPRAY GUN
OPTIONAL ATOMIZING NOZZLES
The NEHRO spray gun is ideal for spraying in
vineyards, orchards, nurseries and greenhouses.
Made from Brass and stainless steel material
and has VITON seals.
The NEHRO gun is capable of high pressure spraying yet
retains an ergonomic design to maintain comfort of use. The
primary feature of this spray gun is the added control over
atomizing the spray pattern and matching the guns settings
to the nozzle. ½” BSP male inlet with ½” swivel.
405-M27-10
405-M27-12
401-061-1802-407
405-M27-18
405-M27-20
405-M27-23
1.0
1.2
1.5
1.8
2.0
2.3
CODE
HOSE SIZES (MM) I.D.
LENGTH (MM)
WEIGHT (GRAMS)
MAX PRESS. KPA/PSI
LIST (EX GST)
CAT
410-47
10/12.5 mm I.D.
430
750
4825/700
$171.59
A
p.82
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Spray Guns
SPOTJET SPRAY GUN
The Spotjet spray gun is the standard spray gun to many of Selecta’s ranges of 12 volt
spray units. It primary features are its strength and durability due to quality materials
in the hand piece and lance being both strong and corrosion resistant. The hand piece
uses stainless steel components for reduced wear/tear and
broad chemical compatibility. An adjustable nozzle
is supplied but other nozzles can be
fitted to suit more specific
spray requirements.
DRAWING
10719
• Adjustable X26 cone jet nozzle with 30º offset from horizontal
• Viton seals suitable for a wide variety of chemicals
• Trigger lock to prevent finger strain
• Strong corrosion resistant 600mm stainless steel lance
• Change spray pattern from straight stream to fine cone
CODE
DESCRIPTION
HOSE SIZES (MM) I.D.
LENGTH (MM)
WEIGHT (GRAMS)
LIST (EX GST)
CAT
410-46
Spotjet Spray Gun
10/12.5
770
420
$81.74
A
SERVICE KIT CODE
410-99000304
Service kit to suit 410-46
$30.43
C
38720-PPB-X26
Nozzle (replacement)
$13.04
C
410-13000601
Nut (replacement) - required with nozzle
$12.17
C
1
2
DRAWING
10264
10278
JET TRIGGER SPRAY GUNS
Features a very strong and sturdy handgun body with on/off
trigger and locking device. Extremely lightweight and comfortable.
Supplied with extension lance and brass adjustable nozzle.
CODE
REF
DESCRIPTION
HOSE SIZES
(MM) I.D.
LENGTH
(MM)
WEIGHT
(GRAMS)
MAX PRESS.
KPA/PSI
LIST
(EX GST)
CAT
411-25
1
M30 Spray Gun - short
10/12.5
370
300
2000/290
$77.39
A
2
M30 Spray Gun - long
10/12.5
710
330
2000/290
$84.35
A
$20.87
C
$9.57
C
411-26
SERVICE KIT CODE
401-30-302-25
479-1928
Service kit to suit M30 Spray Gun Only
Spare Nozzle
KWAZAR TELESCOPIC SPRAY LANCE
Supplied standard with fully adjustable nozzle.
Extends from 850mm to 1380mm.
CODE
HOSE SIZES (MM) I.D.
LENGTH (MM)
WEIGHT (GRAMS)
MAX PRESS. KPA/PSI
LIST (EX GST)
CAT
850
205
700/100
410-26
8
$33.04
A
C1210-043
‘O’ ring
$0.43
C
382-006
Adjustable nozzle (black)
$7.04
C
401-WN040
45 degree elbow and nozzle cap
$9.57
C
401-213-05
Hose Tail
$2.78
C
BRASS TELESCOPIC
SPRAY GUN
This brass easy to use telescopic spray gun extends from 1 to 2 metres increasing spray accuracy and productivity by reducing spray
wastage. Complete with brass cone adjustable nozzle (cone and straight stream) and ergonomic reinforced fiberglass handgrip with
lock off position on trigger.
CODE
INLET SIZE
COMPACT LENGTH
EXTENDED LENGTH
WEIGHT (GRAMS)
MAX PRESS.KPA/PSI
LIST (EX GST)
CAT
410-41
1/2” BSPT (F)
1 metre
2 metres
1000
2400/350
$129.57
A
474-209
Brass Hosetail 1/2” Male x 3/8” Barb
$9.57
C
474-207
Brass Hosetail 1/2” Male x 1/2” Barb
$6.43
C
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.83
Spray Guns
DRAWING
Born to Perform
Spray Gun Accessories
Spray Gun Accessories
1
2
1
TEEJET ADJUSTABLE NOZZLES
1: Brass nozzle provides half turn for wide angle, finely atomised cone spray to a straight stream spray.
2: Poly version provides excellent chemical resistance and is lightweight, making it well suited for hand held and backpack type sprayers.
* To order: Specify tip size eg: 5500-X2 brass or 5500-PPX18 poly.
CODE
REF
LENGTH (MM)
WEIGHT (GRAMS)
MAX PRESS. KPA/PSI
LIST (EX GST)
CAT
5500-X*
1
42
46
1000/145
$31.82
C
5500-PPB-X*
2
47
8
1000/145
$17.27
C
ADJUSTABLE NOZZLES
A: Single adjustable brass nozzle suit Triam and low pressure guns.
B: Polypropylene adjustable nozzle to suit PA series 410-34 spray gun.
2
CODE
REF
LENGTH (MM)
WEIGHT (GRAMS)
MAX PRESS. KPA/PSI
LIST (EX GST)
CAT
417-80
1
65
90
1380/200
$48.70
C
5500-PPB-X12
2
45
35
1000/145
$13.91
C
SWIVEL
Eliminates twisted hose. Brass with Viton ‘O’ ring.
DRAWING
0105
CODE
THEAD SIZES
LENGTH
(MM)
WEIGHT
(GRAMS)
MAX PRESS.
KPA/PSI
MAX TEMP
LIST
(EX GST)
CAT
418-94
1/2” BSPT wmale/female
40
80
5000/725
93˚C (200˚)
$33.04
A
SPRAY SHIELD
Helps reduce excess spray drift. Complete with swivel adjustment and four adaptors to enable fitment to
various spray guns including the PA series spray gun, as well as Volpi, Condor Spotpak and 12 volt
Weedpak sprayers.
CODE
INLET CONNECTION
LENGTH (MM)
WEIGHT (GRAMS)
MAX PRESS. KPA/PSI
LIST (EX GST)
417-86
Various
295
700
965/140
$135.65
CAT
A
SNAP COUPLINGS & HOSEREELS
SNAP COUPLING BRASS
Provides instant liquid cut off when pistol is detached from spray hose. 1/2” BSP male. Max pressure 3000 kPa/435 psi.
CODE
INLET CONNECTION
LENGTH (MM)
WEIGHT (GRAMS)
MAX PRESS. KPA/PSI
LIST (EX GST)
CAT
406-02-PK
1/2” BSPT (M)
75
155
3000/435
$100.00
C
SNAP COUPLING POLY
Provides instant liquid cut off when pistol is detached from spray hose.
1/2” BSP male with locking device. Maximum pressure 1450 kPa/210 psi.
CODE
INLET CONNECTION
LENGTH (MM)
WEIGHT (GRAMS)
MAX PRESS. KPA/PSI
LIST (EX GST)
CAT
406-03-PK
1/2” BSPT (M)
75
40
1450/210
$60.87
C
p.84
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Fire Fighting Accessories
FIRE FIGHTING HOSE REEL
To suit squatpak tank. Available bare or fitted with
hose and adjustable poly nozzle and bracket for
mounting to top of tank.
Pictured: 180F03019E
Pictured: 199A
CODE
LENGTH
(MM)
MODEL
WIDTH
(MM)
HEIGHT
(MM)
WEIGHT
(KG)
HOSE
LENGTH/I.D.
MAX
PRESSURE
MAX CAPACITY
METRES X I.D.
LIST
(EX GST)
CAT
199A
Bare
545
460
525
8
-
900kPa/131psi
30m x 19mm
$356.52
A
180F03019E
Kit
545
460
525
18
30m x 19mm
900kPa/131psi
30m x 19mm
$626.09
A
FIRE FIGHTING ZINC
PLATED HOSE REEL
Complete assembly ready to bolt on to
your existing fire fighting unit
Pictured: JA-1402012
Pictured: JA-1402005
CODE
MODEL
LENGTH
(MM)
WIDTH
(MM)
HEIGHT
(MM)
WEIGHT
(KG)
SPRAY
NOZ.
HOSE
LENGTH/I.D.
HOSE
TYPE
MAX
PRESSURE
MAX CAPACITY
METRES X I.D.
LIST
(EX GST)
CAT
JA-1402012
Kit
520
395
590
21
Fire
36m x 19mm
Fire
1700kPa/247psi
36m x 19mm
$585.00
A
JA-1402005
Bare
520
395
590
9
-
-
-
1700kPa/247psi
36m x 19mm
$194.78
A
FIRE FIGHTING PISTOL
• Brass body completely covered by a shockproof plastic housings and fitted with 3 shockproof rings
• Ideal for fire fighting or wash down applications
• Pull trigger to vary fan to straight stream
• Water temperature 90° centigrade maximum
• Threads 1/2” standard female BSP
• Maximum pressure 24 BAR
• Maximum output 60 L/min
CODE
INLET CONNECTION
LENGTH (MM)
WEIGHT (GRAMS)
MAX PRESS. KPA/PSI
LIST (EX GST)
CAT
410-40
1/2” BSPT (F)
165
1000
2400/348
$176.52
C
ADAPTER CODE
ADAPTER TO SUIT
LIST (EX GST)
CAT
JA-1804090
3/4” Hose
$13.91
C
JA-1804091
1” Hose
$21.74
C
WASHDOWN GUN
• Variable trigger from pencil beam to cone spray
• Heavy Duty Brass body completely covered by plastic housings and with 3 shockproof silicone rings
• Viton seals
• 50L/min max flow
• Max pressure 175psi/1200kpa
• 1/2” BSP female threaded fitting
• Can be used with a wider range of pumps
• Ideal for Dairy, sheep and horse properties
CODE
DESCRIPTION
LIST (EX GST)
CAT
410-48
Washdown Gun
$140.42
A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.85
Spray Gun Accessories
• Heavy-duty steel construction
• Zinc plated
• Holds 36 metres of 19mm hose or 30 metres of 25mm hose
• Serviceable brass swivel assembly
• 1” BSP female inlet
Born to Perform
Hose Reels
STRATA SPRING-RETRACTABLE HOSE REEL
• 20m of 10mm hose
• Heavy-duty PVC housing
• Brass internal hose swivel
• Mounting wall bracket supplied as standard
• Multi-position latching
• 3/8 BSPF inlet
CODE
MODEL
LENGTH
(MM)
WIDTH
(MM)
HEIGHT
(MM)
WEIGHT
(KG)
SPRAY
GUN
HOSE
LENGTH/I.D.
HOSE
TYPE
MAX
PRESSURE
MAX CAPACITY
METRES X I.D.
LIST
(EX GST)
CAT
188
Strata
520
250
480
10
-
20m/10mm
AG
2000kPa/290 psi
20m x 10mm
$460.87
A
PITARM HOSE REEL
Side mounted unit, brass hose swivel with
hose connections, spoked side plates with
rewind handle. Powder coated.
DRAWING
0048/0049
* Bare hose reel supplied unassembled
Pictured: 190
Pictured: 180P10012T
CODE
MODEL
LENGTH
(MM)
WIDTH
(MM)
HEIGHT
(MM)
WEIGHT
(KG)
SPRAY
GUN
HOSE
LENGTH/I.D.
HOSE
TYPE
MAX
PRESSURE
MAX CAPACITY
METRES X I.D.
LIST
(EX GST)
CAT
190*
Bare
500
500
500
9
-
-
-
1724kPa/250psi
100 x 12.5
$315.65
A
Kit
500
500
500
25
Triam
100m/12.5mm
AG
2068kPa/300psi
100 x 12.5
$1,260.87 A
Kit
500
500
500
17
Triam
100m/12.5mm
Nylon
1724kPa/250psi
100 x 12.5
$1,426.09 A
Hose Reels
180P10012C
180P10012T
Pictured: 180E03010C
DRAWING
0932
The base plate allows direct attachment to the
hose reel mounts on the following tanks
Pictured: 181
ECONOMY HOSEREELS
• Powder coated
• Steel plate construction with rewind handle
• Brass swivel and fittings are standard
Pictured: 430-0300E
300 Litre single
baffle tank
Pictured: 430-0400E
400 Litre single
baffle tank
Pictured: 430-0800E
800 Litre
twin baffle tank
CODE
MODEL
LENGTH
(MM)
WIDTH
(MM)
HEIGHT
(MM)
WEIGHT
(KG)
SPRAY
GUN
HOSE
LENGTH/I.D.
HOSE
TYPE
MAX
PRESSURE
MAX CAPACITY
METRES X I.D.
LIST
(EX GST)
CAT
181
Bare
450
350
370
4
-
-
-
2000kPa/290psi
30m x 10mm
$270.43
A
180E03010C
Kit
450
350
370
12
PA Series
30m/10mm
AG
2000kPa/290psi
30m x 10mm
$573.91
A
180E02012CT
Kit
450
350
370
12
TRIAM
20m/12.5mm
AG
2000kPa/290psi
30m x 10mm
$478.26
A
p.86
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Hose
Selecta hose is manufactured from the highest
quality materials and has been rigorously tested to
ensure reliable performance and durability. Ideal for
most agricultural applications. The Selecta range
includes delivery hose, suction hose, bypass hose.
Available in sizes from 8mm I.D to 50mm I.D with
pressures ranging up to 4000KPa (560psi). A wide
range of hose connectors, hose clamps and fittings
to suit are readily available off the shelf. All hose
dimensions are inside diameter (I.D.).
SILVAN AG DELIVERY HOSE
SMOOTHLINE DELIVERY TUBING
Lightweight rigid tubing hose, ideal for use in inaccessible terrain where
risk of snagging hose is high. Maximum working pressure 1724 kPa
(250psi). Requires special hose connectors.
HOSE I.D. SIZE
LIST (EX GST)
CAT
186-12B-100
1/2” O.D.
$834.78
B
20 METRE COIL LENGTHS
HOSE I.D.
CODE
LIST (ex GST)
CAT
100 METRE COIL LENGTH ONLY
CODE
Flexible PVC reinforced spray hose. Maximum working pressure
690 kPa (100psi) for 186-8D and 2067 kPa (300psi) for all others.
10MM
186-10M-20
$172.17
C
12MM
186-12M-20
$221.74
C
19MM
186-19M-20
$370.43
C
100 METRE COIL LENGTHS
HOSE I.D.
SUCTION HOSE
Ideal for fitting on the inlet suction side of pumps. Features wire
reinforced construction which helps guard against the hose collapsing.
(Available per metre)
12MM
186-12F
$9.57
C
19MM
186-19F
$9.57
C
25MM
186-25A
$15.65
C
32MM
186-32A
$15.65
C
38MM
186-38S
$21.74
C
50MM
186-50S
$30.43
C
10MM
12MM
CODE
186-8D-100
186-10D-100
186-12C-100
LIST (ex GST)
$297.39
$290.43
$388.70
CAT
C
C
C
FIRE FIGHTING HOSE
Specially designed to suit stationary or mobile reels on fire control units.
Also used in many other agricultural applications, manufactured to AS 1221.
Lightweight PVC, resistant to U.V. light and the material has self extinguishing
properties. Maximum pressure 900 kPa (131psi).
AVAILABLE IN 20, 30 AND 100 METRE COIL LENGHTS ONLY
BYPASS HOSE
Low pressure flexible PVC hose ideally suited for the use on Bypass return
lines of pumps. Maximum pressure 1379 kPa (200psi). (Available per metre)
CODE
HOSE I.D.
LIST (EX GST)
CAT
186-25E
25mm
$23.48
C
CODE
HOSE I.D.
LIST (EX GST)
CAT
186-19E-20
19mm
$107.80
C
186-19E-30
19mm
$143.48
C
186-19E-100
19mm
$516.12
C
PROFESSIONAL DELIVERY HOSE
Flexible PVC reinforced spray hose ideally suited for
high pressure applications. Maximum working pressure
4000kpa (568 psi).
DIESEL DELIVERY HOSE
Quality delivery hose for all diesel
applications (Available per metre)
CODE
PF0225-33
186-25D
HOSE I.D.
19mm
25mm
LIST (EX GST)
$13.91
$38.26
CAT
C
C
CODE
HOSE I.D.
LIST (EX GST)
CAT
186-10M
10mm
$2.96
C
186-12M
12mm
$4.26
C
186-19M
19mm
$20.00
C
186-25M
25mm
$28.70
C
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.87
Hose
HOSE I.D.
CODE
LIST (ex GST)
CAT
8MM
Spray Nozzles
Spray Nozzles
p.88
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Born to Perform
XR11005
C
M
M
M
XR11006
C
C
M
M
Nozzle
selection isC often based
upon
XR11008
C
C dropletC
size. The droplet size from a nozzle becomes
very important when the efficacy of a particular
plant protection
TurfJet®
(TTJ) chemical is dependent on
coverage, or the prevention of spray leaving
the target area is a priority. bar
M
M
M
TP11006
M
M
M
M
droplets
can be used
for contact C
TP11008
Mcoarse-sized
M
M
and systemic herbicides, pre-emergence
surface-applied herbicides, insecticides and
fungicides.
Turbo FloodJet® (TF)
M
C
M
M
M
M
M
M
F
VF
DG TwinJet®
(DG-TJ60)
Very Fine
Fine
An important point to remember when choosing
bar
a spray nozzle that produces abar
droplet size in
M
C
The majority of the nozzles used in agriculture
one of the six categories is that one nozzle can
3
3.5either4fine,4.5
1.5size classifications
2
2.5
3at
2
2.5
3
3.5
can be classified2as producing
produce different1droplet
Medium
Coarse
medium, coarse,XCor very
different pressures. A nozzle might produce
1/4TTJ02-VS
XCcoarse
XC droplets.
XC
XC
TF-2
XC
XC
XC
XC
XC
DGTJ60-110015 F
F
F
F
Nozzles that produce fine droplets are usually
medium droplets at low pressures, while
1/4TTJ04-VS
XC
XC
XC
XC
XC
TF-2.5 fine droplets
XC
XC
XC isXC
XC
DGTJ60-11002
M
M
F
F
recommended for post-emergence applications,
producing
as pressure
increased.
VC
XC
1/4TTJ05-VS
XC
XC
XC on the
XC intended
XC
TF-3
XC
XC
XC
XC
XC
which require excellent
coverage
DGTJ60-11003
C
M
M
M
Droplet size classes are shown in the following
1/4TTJ06-VS
XC
XCnozzles
XC used
XC
TF-4to assist in
XCchoosing
XC an
XCappropriate
XC
XC
target area. TheXC
most common
tables
Very Coarse
Extremely
Coarse
DGTJ60-11004
C
C
C
C
in agriculture are
that produce
medium1/4TTJ08-VS
XCthoseXC
XC
XC
XC
TF-5tip.
XC
XC
XC
XC
XC
spray
DGTJ60-11006
C
C
C
C
sized droplets. Nozzles
producing
and
1/4TTJ10-VS
XC
XC
XC mediumXC
XC
TF-7.5
XC
XC
XC
XC
XC
Droplet size classifications are
Nozzle
selection
is
often
based
upon
droplet
coarse-sized
droplets
can
be
used
for
contact
Nozzle selection is often based upon droplet size. The1/4TTJ15-VS
droplet sizeXCfrom
very
important
the
particular
plant
protection
based on BCPC specifications
C
C and C
C
XC a nozzle
XC
XCbecomes
XC
TF-10
XC when
XC
XC efficacy
XC
XC of a DGTJ60-11008
size. The droplet size from a nozzle becomes
and systemic herbicides, pre-emergence
AIXR TeeJet® (AIXR)
in
accordance
with
ASAE
Standard
F
VF area is a priority.
is dependent
coverage,
or the prevention
spray leaving
the target
very chemical
important when
the efficacy of aon
particular
surface-applied
herbicides,of
insecticides
and
S-572 at the date of printing.
Classifications are subject to change.
plant protection chemical is dependent on
bar
The majority of the nozzles used infungicides.
agriculturecan beTwinJet®
classified
fine, medium,
coarse, or very
(TJ)as producingVeryeither
DGcoarse
TeeJet®droplets.
(DG E)
Fine
Fine
coverage, or the prevention of spray leaving
An important point to remember when choosing
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
the target
area isthat
a priority.
Nozzles
produce fine droplets aare
usually
recommended
for
post-emergence
applications,which
require
excellent
coverage
on
the intended
bar
bar
spray nozzle that produces a droplet size in
4
Droplet Size Information
Drop Size Classification
F
F
M
C
C
C
M
C
The majority
the nozzles
in agriculture
one of the
six categories
is that
oneare
nozzle
can
target ofarea.
The used
most
common nozzles
used
in agriculture
those
produce
AIXR110015
XC that
VC VC
C
C mediumsized
C
C M Mdroplets.
M M Nozzles producing medium and coarse-sized droplets
2
2.5
3
3.5
4
2.5
3
3.5
4
can be classified as producing either fine,
produce different droplet size classifications at2
XC
XC VC Medium
VC C herbicides,
C
C Coarse
C insecticides
C M M and fungicides.
can coarse,
be used
forcoarse
contact
and systemic
herbicides,
surface-applied
medium,
or very
droplets.
different
pressures. Apre-emergence
nozzleAIXR11002
might produce
DG95015E
M
M
F
F
F
TJ60-6501
F
VF
VF
VF
VF
Nozzles that produce fine droplets are usually
medium droplets at low pressures,
while XC XC XC VC VC C
AIXR110025
C
C
C
C
C
DG9502E
M
M
M
M
M
F a droplet
F size in
VF one of VF
An important
point to remember
choosing
a spray
nozzle
thatF produces
the six categories is that one nozzle can produce different
recommended
for post-emergence
applications, when
producing
fine droplets
asTJ60-650134
pressure
is increased.
DG9503E
C
M
M
M
M
VC
XC
TJ60-6502
F
F
F
F
F
AIXR11003
XC XC XC
VC VC droplets
C
C at
C low
C pressures,
C
C
which
require excellent
coverage on the intended
droplet
size classifications
at different
pressures.
A nozzle
produce
medium
while
producing Cfine droplets
as MpressureMis
Droplet
size classes are
shown
inmight
the following
DG9504E
C
M
TJ60-6503
M
F
F
F
F
target area. The most common nozzles used
AIXR11004
XCCoarse
VC VC Extremely
VC C Coarse
C
C
C
to assist in choosing
an appropriateXCM XC XC Very
DG9505E
C
C
C
M
M
TJ60-6504
Mchoosing
M an appropriate
M
F
increased.
Droplet
size mediumclasses aretables
shown
in
the
following
tables
to
assist
in
spray
tip.
in agriculture
are those
that produce
spray tip.
AIXR11005
XC
XC
XC
XC
XC
VC
VC
VC
C
C
C
TJ60-6506
M
M
M
M
M
sized droplets. Nozzles producing medium- and
Droplet size classifications are
TJ60-6508
C XC
Con
M VC coarse-sized
Nozzle
selection
often
based
upon
droplet
used for contact
based
BCPC
and
Nozzle
selection
is often based upon droplet
coarse-sized droplets
can
be
used foris(XR)
contact
AIXR11006
XC
XC
XCTeeJet®
XCspecifications
VC
VCM C droplets
C M C can be DG
XR
TeeJet®
and
XRC
(XRC)and
TeeJet®(TP)
(DG)
TeeJet®
(TP)
TeeJet®
AIXR
(AIXR)
TJ60-8001
VFbecomes
VF
VF
in accordance
withVF
ASAE Standard
size.
The
droplet sizeVF
from a nozzle
systemic herbicides,
pre-emergence
size.TeeJet®
The droplet
size from a nozzle becomes
and systemic herbicides,
pre-emergence
F
F
VF
VF
S-572
at
the
date
of
printing.
TJ60-8002
F
F
F
F
F
very
important
when
the
efficacy
of
a
particular
surface-applied
herbicides,
insecticides
and
very important when the efficacy of a particular
surface-applied herbicides,
insecticides
and
barbar
Turbo
TeeJet®
(TT)
and
Turbo
TeeJet®
Duo
(QJ90-2XTT)
AI
TeeJet®
(AI)
and AIC TeeJet® (AIC)
bar
bar
Classifications
are subject
to change.
plant
protection chemical
is dependent
on
fungicides.
TJ60-8003
F
F
F
F
F
plant protection chemical is dependentbar
on
fungicides.
Very Fine
Fine
Very Fine
Fine
coverage,
or when
the prevention
of1.5
spray
coverage, or the prevention
spray leaving
TJ60-8004
M1
M leaving
F 2.5 An important
F to4remember when choosing 2 2
2.52.5 bar3 3
3.53.5
4 4
3
3.5
4
2 2 of
3.5
2 bar
3F
3.5point
remember
choosing
1 is a1.5
2.52.53 3.5 3 4 4.5 An
5important
5.5 4
6point tothe
target
area is asize
priority.
the target area
priority.
TJ60-8005
Min
M
M
F nozzle that
F produces a droplet size in
a spray
a spray nozzle that produces
a droplet
DG80015
M
F
F
F
XR8001
M1.5 used
FM
FM
TP8001
F
F agriculture
F
F of the six Fcategories
2F in
3 3.5
4.5
MM F4 4.5M 5F 5.5
C M6 F 6.5 7F F 8
C5 sixF5.5
TJ60-8006
Mcan
M2.5
M F 4 one
M 6 F is that one TP8001
The
the 1
nozzles
agriculture
of the
categories
nozzle can2 2.5 F 3 3.5
The
majority XC
of theVC
nozzles
ismajority
that oneofnozzle
AIXR110015
VC used
C in C
C
C M one
M M M
DG8002
C F
M F
M F
M F
M F
F
F
F
XR80015
Meither
F
FM different
F Mdroplet
F size classifications
TP80015
F
F
F
F droplet
TP80015 at
TJ60-8008
CMat
M fine,
M F
can
be
classified
as producing
produce
can
be classified as producing
either
fine, F
produce
different
size
classifications
TT11001
AIXR11002
XC XC VCcoarse
VC droplets.
C
C
C
C different
C Mpressures.
M
DG8003
C VC Medium
M
FFMCoarse
Fpressures.
AI110015
VCM MC
C M CF Coarse
C MC F C M
C F C
F
F
F
XR8002
M droplets.
MF CF M F different
F F M FAF nozzle might
medium,
coarse,produce
orCvery
produceVC VC
medium,
A
nozzle
might
TJ60-8010
CM Mcoarse
C M Medium
TP8002coarse, or very
M
M
F
F
F
TP8002
M
QJ90-2XTT11001
DG8004
C
C
M
M
M
that produce
fine droplets
low pressures,
while
Nozzles
thatXC
produce
are usually
at Nozzles
low
pressures,
whileFM
AIXR110025
XCMfine
XC droplets
VC M VC
C MC
C medium
Cdroplets
C
M
M
M
XR8003
M VFare usually
M
M
M VFat M
TJ60-11002
VF M medium
VF droplets
TT110015
TP8003
MC
M
TP8003
MVC VC M
M C
M C
C
C M Mapplications,
M M M producing
F
F fineFdroplets
F as pressure
AI11002
VC
VC
VC
C
C
C
C MC
DG8005
C
C
C
M
M
recommended
for
post-emergence
is
increased.
recommended
for
post-emergence
applications,
producing
fine
droplets
as
pressure
is
increased.
QJ90-2XTT110015
TJ60-11003
FC
F M
M
M
M
XR8004
M F
M
MF XC M F M
AIXR11003
XC XCM XC VC M VC C MC
C MC
C M
C
TP8004
TP8004
M
M XC F M
VCF M
VC
which
require
excellent
coverage
on
the
intended
which
require
excellent
coverage
on
the
intended
DG110015
M
F
F M
TT11002
TJ60-11004
F
F
F
F
F
sizeMclasses
in the following
size classes
are shown
in the following
M
M
M
XR8005
M M
M shownAI110025
C Ccommon
C
CCnozzles
M CM M M M Droplet
M
M
F are
VC VC M
VC VC VC
C MC
TP8005
M VC VC
MVC C Droplet
MC
M
TP8005 XC VC
M C MCM C M
target
area.
The most
target
area. The
used
AIXR11004
XC most
XCCcommon
XC XC nozzles
C in choosing
QJ90-2XTT11002
DG11002
M C Very Coarse
M
MExtremely
TJ60-11005
MC
M VeryCused
F to Coarse
tables
assist
inF choosing
an appropriate
tables
toC assist
an appropriate
Coarse
CoarseF C
Extremely
C
C
C
XR8006
C
C
C
C
in TT110025
agriculture are those that produce mediumin TP8006
agriculture are those
that produce mediumCC tip.
C
TP8006
C
C
C
DG11003
C C VC VCM CVC VC M VC
TJ60-11006
M
AIXR11005
XC XCC XC XC C XC VC CVC VC spray
C
C
VCM
C
C MmediumM CM and
M C M spray
M
AI11003
XC XC
VC MC
C M
C
C
C
C
C
XR8008
VCproducing
VC
CF tip.M CM F M C
sized
droplets. Nozzles
sized
droplets. Nozzles
QJ90-2XTT110025
TP8008
C producing
C medium-Cand
C
C
TP8008
C
C
Droplet size
Droplet
size classifications
areM
DG11004
C C
C classifications
M are
M C
M C
TJ60-11008
MF
M
M F
M VF
F
VF
VF
XR11001
F based
F
F
VF
AIXR11006
XC XC XC XC XC VC VC VC C
C
C
TT11003
based
on
BCPC
specifications
and
specifications
DG11005
C F VC VCC FVC VC C VC
TP11001
F
F
F
VF
VF
TP11001 XC XC
F VC MVCVF C M
VF C
VCM C
C M C onCBCPCM
M
M MMandM M M M
TJ60-11010
AI11004
C
QJ90-2XTT11003
AIXR
TeeJet® (AIXR)
F
F
F
XR110015
F
F in accordance
F
F
F
F
AIXR TeeJet® (AIXR)
in accordance with ASAE Standard
withFASAE Standard
TP110015
F
F
F
F
TP110015
F
F of printing.
F
F
F
S-572
at the date
S-572
at the date
of printing.F
TT11004
F
F
F
XR11002
M VC AIC
Turbo
TeeJet® (TT)Fand Turbo
TeeJet®
Duo (QJ90-2XTT)
AI
TeeJet® (AI)
TeeJet®
(AIC)
XC and
CF Classifications
C FC bar
C Fsubject
C toCchange.
M FM M F
AI11005
VC VC
VC VCF C
C F C
are subject
to
are
QJ90-2XTT11004
bar
TP11002
F
F
F
F
F
TP11002 XC XC Classifications
F XC VC FVC
F change.
F
F
F
XR110025
M
M
F
F
F
F
F
TT11005
bar
barC F C CF C FM M F
TP11003
F
F
F
F
F
TP11003 XC XC F XC VC FVCTECHNICAL
F VCINFORMATION
VC 2VC
VC 3FC 3.5
F
F
F
XR11003 1XC M
M 2.5
AI11006
VC VC
VCF VC C F C
1.5
4 4.5 5 5.5 6
1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6
QJ90-2XTT11005
TP11004
M
M
M
F
F
TP11004
M
M
M
F
F
M
F
F
XR11004
M 3.5 M
M 6 6.5
F 7 F8
TT11006
1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6
2 M2.5
3VC
4C 4.5C M5 C 5.5C
XC
VC
VC
C
C
M
AI11008
XC
XC
XC
XC
VC
VC
VC
VC
VCM VC C M C
AIXR110015
XC
VC
VC
C
C
C
C
M
M
M
M
TP11005
M
M
M
M
M
TP11005
M
M
M
AIXR110015 XC VC VC C
C
C
C M M M M
M
M
M
XR11005
C
M
M
M
M
M
QJ90-2XTT11006
TT11001
TP11006
M
M
M
M
M
TP11006
M
M
M
M
M
TT11008
M
M
M
XR11006
C
C
M
M
M
M
M
AI110015 XC
VC
VC
VC
VC
M C CMM C
AIXR11002 C XCM XCM VCM VCF CF CF C F C F C F MF M AIXR11002
XC XC
XC VC
VC VC
VC CCC CCC C C C C CC C C
AI11010
XC XC XC XC VC VC VC VC VC VC VC C
QJ90-2XTT11001
QJ90-2XTT11008
TP11008
C
C
M
M
M
TP11008
C
C
M
M
M
M
M
M
XR11008
C
C
C
C
M
M
M
TT110015
AIXR110025
XC
C CC CC CC C
AIXR110025C XCC XCM XCM VCM VCM CM C F C F C F CF C
AI11002
VC XC
VC XC
VC VC
VC VC
VC CC C
C
C
QJ90-2XTT110015
Turbo
TeeJet®
Induction
(TTI)
Turbo
TwinJet®
(TTJ60)
AIXR11003
XC
XC
XC
VC
VC
C
C
C
C
C
C
AIXR11003
XC
XC
XC
VC
VC
C
C
C
C
C
C
TT11002
C
C DG
C TwinJet®
M M M M M M M
F
AI110025 (TTJ)
XC VC VC VC VC VC VC C Turbo
C
CFloodJet®
C
C (TF)
TurfJet®
DG TwinJet®bar
(DG-TJ60)
Turbo FloodJet® (TF)
QJ90-2XTT11002
AIXR11004
XC XC XC XC VC VC
AIXR11004
XC XC
XC XC VC (DG-TJ60)
VC VC C
C
C
C
bar VC C C C C
TT110025
M CM CM C
AI11003
XC XC
XC XC
VC XC
VC XC
VC VC
VC VC VC C
CC CC C
bar
AIXR11005
XC
AIXR11005 VC XCC XCC XCM XCM XCM VCM VCM VC
bar
bar
bar
bar
QJ90-2XTT110025
Drop Size Classification
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
AIXR11006
XC
VC
C CC CC C
AI11004
XC2XC
XC XC
VC XC
VC4 VC
VC 4.5
VC VC
VC VC
3VC XC
3.5
1
TTJ60-11002 VC C
C
C
C M M M M M M
1/4TTJ02-VS
XC
XC
XC
XC
XC
XCTT11004
XC
XC
XC
TF-2
Turbo
(TT)
and
TeeJet®
XC VC
CandC Turbo
C
CF C F C
MF M F
Turbo TeeJet®
(TT)DGTJ60-110015
TeeJet®
DuoFM(QJ90-2XTT)
AI TeeJet®
TeeJet®XC
(AI)
AIC
AI11005
XC
XC
VCC TeeJet®
VC
VCDuo
VC
C
TTJ60-110025
XC
VC
CTurbo
C VCC (AIC)
C VCC(QJ90-2XTT)
M C M C MXC
QJ90-2XTT11004
1/4TTJ04-VS
XC
XC
XC
XC
XC
XC
XC
XC
XC
TF-2.5
XC
DGTJ60-11002
M
M
F
F
F
TT11005
TTJ60-11003
XCXC XC
VC XC
C VC
C VCCXCbar
C VCM C MXC
C bar
C
C
C M M
AI11006
XC
XC
VCCbar
VCC VCC VC
C
1/4TTJ05-VS
XC
XC
XCQJ90-2XTT11005
XC
XC XCXC VC VC VC C
TF-3
DGTJ60-11003
C
M
M
M
M
1/4TTJ06-VS XCXC VC XC C XC
XC C XC C
XCTT11006
XC
XC
XC
TTJ60-11004
C 5TF-4
C 5.5C 6MXC
1XC 1.5
2XC 2.5
3 C 3.5
4 54.5
2VC 2.5C 3C C3.5C C4C 4.5
2XC 2.5
3XCC 3.5
4VC 4.5
6.5
XC 1VC 1.5
VC
MC6
AI11008
VC
VC
VC 5.5
VC 6VC
C 7C
DGTJ60-11004
CC 5CC 5.5
QJ90-2XTT11006
1/4TTJ08-VS
XC
XC
XC
XC
XC
XC
XC
XC
XC
TTJ60-11005 XC VC C
C
C
C
C
C TF-5
C
C
CXC
DGTJ60-11006
C
C
C
C
C
TT11001
TT11001
1/4TTJ10-VS
XC VC
XCTT11008
XC
XC XCXCCXC MVC
MXC XC
M
M
F XCCVC
F XC
F CVC
F CVC
FTF-7.5
F CVC
F XC
MVC MC FC FC FC FC FC FM F QJ90-2XTT11001
AI110015CXCXCVC
VC
CVC
CVC
CC
AI11010
XC VC
XC
VC
QJ90-2XTT11001
TTJ60-11006
C
CXC C XC C
C TF-10
C
C
CXC
DGTJ60-11008
C
C
C
C
C
1/4TTJ15-VS XCXC XC XCVC XC
XCQJ90-2XTT11008
XC
XC
XC
TT110015
TT110015
C VC
M VC
M VC
M VC
M CM CF C F C F C F C
C
C M M M M M
F
F
F
F QJ90-2XTT110015
AI11002 C VC
QJ90-2XTT110015
XC
XC
XC
XC
XC
XC
XC
Turbo TwinJet® (TTJ60)
TT11002
C E)
C
C
DG
TeeJet® (DG
QJ90-2XTT11002
Turbo TeeJet® Induction (TTI)
M
M
M
M
M
M
M
F
182
bar
TT110025
VC C
C M M bar
M M M M M M
QJ90-2XTT110025
1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6
TT11003
VC 2 C
C 2.5C
C 3M M 3.5
M M M4 M
3.5
4
VF
VF
F
F
M
M
M
VF
F
F
F
F
M
M
M
VF
F
F
F
F
M
M
VF
VF
F
F
F
M
M
VF
F
F
F182
F
M
M
M
VF
F
F
F
F
M
M
TTJ60-11002
VC C
C
QJ90-2XTT11003
DG95015E
M
TT11004
TTJ60-110025
XC XC
VC VCC
QJ90-2XTT11004
DG9502E
M
DG9503E XC VCC C
TTJ60-11003
TT11005
XC VC
QJ90-2XTT11005
DG9504E
C
TTJ60-11004
XC
VC
C
TT11006
DG9505E
XC C VC
QJ90-2XTT11006
TTJ60-11005
XC VC C
TT11008
TTJ60-11006
XC XC
XC XC
VC
QJ90-2XTT11008
DG
TeeJet® (DG)
C
CC
C
VC
C
VC
C
VCC
C
M
CC
M
M C
VC
C
C
CVC
C
VCC
M
M
F
CC
M
C MC
C
C
M
C
C
C CC
C
C
CC CC
CC
Turbo TwinJet® (TTJ60)
M
CC
C
C
C
C
C
CC
182
M
MM
M
C
C
C
C
CC
M
F
MM
M
M
M
M
M
CM
C
CC
M
M
M
M
bar
bar
TECHNICAL
INFORMATION
2.5REFERENCE
3
DROPLET
SIZE2 COLOUR
DG80015
1 M1.5 2 M2.5
VERY
FINE
DG8002
C
M
TTJ60-11002
VC
C MC
DG8003
CC
FINE
DG8004
TTJ60-110025
XC C VC C CC
MEDIUM
DG8005
C
C
TTJ60-11003 XC VC C
C
DG110015
M
F
COARSE
TTJ60-11004
XC MVC C MC
DG11002
VERY
COARSE
DG11003
TTJ60-11005
XC C VC C MC
DG11004COARSE
C
C
EXTRA
TTJ60-11006
XC XC VC C
DG11005
C
C
M
F
CM
M
MC
C
M
C
M
C
C
CC
3
C
C
C
C
C
C
M
3.5
M
M
M
MC
C
C
F
MC
MC
M
C
C
4
M
C
C
C
C
C
3.5
M
4.5
M
M
M
M
C
M
C
F
C
M
M
C
M
C
M
4
5
M
M
C
C
C
C
5.5F
M
MM
MM
M
M
F
CM
CM
M
C
M
6
M
M
M
M
C
C
TT11002
C XC
C VC
C VC
M VC
M VC
M VC
M VCM CM CM C F C
AI110025
TwinJet®
(TJ)
QJ90-2XTT11002
bar
TECHNICAL INFORMATION
TT110025
C XC
C VC
M VC
M VC
M bar
M VCM VCM CM C M C
AI11003 VC XC
VC
QJ90-2XTT110025
1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6
7
TT11003
2 XC
2.5VC
3XC
3.5
CXC
CXC VC
C
C VC
M VC
M VC
M VC
M VC
M CXC
M 4CXC
AI11004 VC
TTI110015
XC XC
XC
XC
XC
XC
XC
XC
QJ90-2XTT11003
TT11004
TJ60-6501
F CXC C
VF XC
TTI11002
XC VC
XC
XCVFVC
XC
XC
XC
XC
XC
C VC
C VF
C VC
C VC
M
MVFCXC
AI11005XC
XC
XC XC
VC
VCM CXC
QJ90-2XTT11004
TJ60-650134
F XC XCF XC XC FXC XC XC
VF XC XCVFXC
TTI110025
XC XC
TT11005
TJ60-6502
F VC XC
F C VC
FC VCC VCCF VCM VCM FC
C VC
AI11006XC
XC
TTI11003
XC VC
XC XC
XC VC
XC VC
XC XC
XC XC XC XC XC XC
QJ90-2XTT11005
TJ60-6503
M
F
F
F
F
TT11006
TTI11004
XC VC
XC
XC XC
XCMXC
XC
XC
XC
XC
XC
XC
VC
VC
C VC
C VC
C VC
C VC
C
C VC
M FCXC
TJ60-6504
M XC
MXC
M VC
AI11008XC
XC
QJ90-2XTT11006
TTI11005
XC XC
XC XCM XC XC MXC XC XC
XC XC MXC
TJ60-6506
M
M
TT11008
VC
VC
C VC
C VC
C VC
C VC
C
C VC
MMVC
AI11010XC
TJ60-6508
C XC
MXC
M VC
TTI11006
XC XC
XC
XC XC
XCC XC
XC
XC
XC
XC
XC
XC
XC
QJ90-2XTT11008
TJ60-8001
VF
VF
VF
VF
VF
TJ60-8002
F
F
F
F
F
Turbo
TwinJet®
(TTJ60)
Turbo
TeeJet®
Induction (TTI)
TJ60-8003
F
F
F
B C FPC /AS AEF
bar F bar
TJ60-8004
M
M
F
F
TJ60-8005
M
M
M
F
F
l/min
2 2.5
3 3.5
4.5 4.55M 55.55.56 M6
1M 1.5
2 M2.5
3 3.5
TJ60-8006 1 1.5
M4 4
IDK N IDK IDK T
[bar]
TJ60-8008
MM XCM XCM
M XCM XCMMXC
TTI110015
TTJ60-11002
VC XC
CC XC
C XC
C MXC
C XC
M XC
0.28M
1.5M
TJ60-8010
C
C C
C
TTI11002
XC XC XC
XCC XCC XCM XCM XCM XC
TTJ60-110025
C VFXC
CC XC
C VF
TJ60-11002 XC VCF C
VF
2.0VF
0.32
TTI110025
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
TJ60-11003 XC VCF C
TTJ60-11003
C F CC C FC
C 2.5CF M 0.36
MF
TTI11003
XC
XC
XC
XC
XC
XC
XC
XC
XC
XC
TJ60-11004
F
F
F
F
FXC
120-01
M C C C 3.0C C 0.39
TTJ60-11004
XC
VC
C
C
C
M
TJ60-11005
M XC XC MXC XC XC
F
TTI1100490-01
XC
XCF XC XC FXC
0.45
M C MC XCC 4.0
TJ60-11006
M XC
TTJ60-11005
C XC
C MXC
C XC
TTI11005XC VC
XC
XC XC XCCF XCC XCC FXC
5.0M
0.51M
TJ60-11008 (80 M)
M
M M
M
TTJ60-11006
VC XC
C XC
C XC
C XCC XCC XCC XCC XCC XC
TTI11006XC XC XC
0.55M
6.0M
TJ60-11010
M
M F
M
(
)
IDK
Droplet size classifications are
IDK
182 TECHNICAL
183
INFORMATION
TECHNICAL
INFORMATION
based on BCPC
specifications
and INFORMATION
TECHNICAL
120-015
in accordance with ASAE Standard
90-015
S-572 at the date of printing.
(60 M)
Classifications are subject to change.
IDK
120-02
90-02
(60 M)
IDK
120-025
90-025
(60 M)
C
C
C
C
M
M
F
C
C
C
C
M
M
M
VC
VC
C
C
C
M
M
1.5
2.0
2.5
3.0
4.0
5.0
6.0
1.5
2.0
2.5
3.0
4.0
5.0
6.0
1.5
2.0
2.5
3.0
4.0
5.0
6.0
0.42
0.48
0.54
0.59
0.68
0.76
0.83
0.56
0.65
0.73
0.80
0.92
1.03
1.13
0.70
0.81
0.91
0.99
1.15
1.28
1.40
1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 7
1.5TTI110015
2
2.5 XC 3 XC XC XC XC XC 2XC 2.5
4
XC XC3 XC 3.5
XC XC
XCTeeJet®
XC
XC
XCXCAIC
TTI11002
XC
XC XC (AIC)
XC FXC XC
DGTJ60-110015
F XCF XC FXC XC
F
AI
(AI)XCand
TeeJet®
XC TTI110025
XC
XC XCXCXC XC
XC XC XC
DGTJ60-11002
XC TTI11003
XC
XC XCXCXC XC XC XCbar
DGTJ60-11003 XC
XC
XC
XC
XC
2XC 2.5
3.5
8 TTI11004
XC 3XC
XC 4XC 4.5
XC
DGTJ60-11004
XC
XC
XC
XC
TTI11005
XC XC
XC XC XC
DGTJ60-11006
XC
XCVCXCXC
VC VC VC C
C
CXCAI110015
XC XC XC
DGTJ60-11008
XC TTI11006
XC
XC XCXCXC XC
VC VC VC VC VC C
C AI11002
MXC XC
M
CXC XC
M
5
XC
CXC 5.5
C
CXC XC
C
C
C
CXC XC
C
C
C
XC VC
C AI110025
DG TeeJet®
(DGVCE) VC VC VC VC
XCF XC
XCM XC
6XCC6.5
XC
XCC XC
C
C
XCC XC
C
C
FXC
MXC
7
CXC
CXC
C
CXC
C
XC
F
XC
M
8XC
C
XC
C
C
XC
C
C
C
C
C
C
C
C AI11003
barVC
XC XC VC VC VC VC VC
C
C
C
C
C AI11004
2 VC VC
2.5 VC VC3 VC VC3.5C
XC XC VC
C
4C
DG95015E
M
M
F
XC XC XC VC VC VC VC VC VC
C AI11005
DG9502E
M
M
M
DG9503E
C
M
M
XC XC XC VC VC VC VC VC VC
C AI11006
DG9504E
C
C
M
DG9505EXC XC XC
C XC VC
C VC VCC VC VC
C AI11008
C AI11010
F
C
M
M
VC
M
MVC
C
F
C
M
M
C
M
MC
XC XC XC XC VC VC VC VC VC VC VC
C
DG TeeJet® (DG)
Turbo TeeJet® Induction (TTI)
l/ha
C
C
183
Droplet Size Information
1
TT11003
AIXR11006 VC XCC XCC XCC XCC XCM VCM VCM VCM CM CM C
1.5QJ90-2XTT11003
2
2.5
3
2
2.5
3
3.5
4
1
TF-2
TF-2.5
TF-3
TF-4
TF-5
TF-7.5
TF-10
Drop Size Classification
bar
2
2.5 bar 3
3.5
4
6.0
12.04 M 4.5
14.0 5 16.0
DG80015
M2 2.510.0
M5.5 618.0
F7
17.0 1.5 8.0
3M 3.5
75.0
km/h km/h
km/h
km/h
DG8002km/h km/h
C
M km/h Mkm/h km/h
M
M
XC XC
XC TTI110015
DG8003
67
56
48
XC TTI11002
DG8004XC XC
64
55
77
DG8005XC XC
XC TTI110025
62
72
86
DG110015
XC XC
XC TTI11003
78
67
94
DG11002
XC XC
XC TTI11004
77
108
90
DG11003
XC XC
XC TTI11005
122 102
DG1100487
XC
XC
XC TTI11006
DG11005
132
101
115
130
142
163
182
199
134
156
175
192
221
247
271
168
194
218
238
276
307
336
110
84
96
108
118
136
152
166
112
130
146
160
184
206
226
140
162
182
198
230
256
280
94
72
82
93
101
117
130
142
96
111
125
137
158
177
194
120
139
156
170
197
219
240
XC XC
XC
XC
XC
XC
XC
XC
C
42
XC
C
48
XC
C
54
M
XC
59
M
XC
68
C
XC
77
C
XC
C
83
63
72
81
89
102
114
125
84
98
110
120
138
155
170
105
122
137
149
173
192
210
XC XC XCM
28
XC XCM
32
XC XCC
36
XC XCF
39
XC XCM
45 M
XC XC
51 M
XC XCC
55
34M
XC
38C
XC
C
43F
XC
47M
XC
54M
XC
61
C
XC
C
66
50
58
65
71
82
91
100
67
78
88
96
110
124
136
84
97
109
119
138
154
168
XC
24
XC
27
XC
31
XC
33
XC
39
XC
44
XC
XC
XC
XC
XC
XC
XC
XC
XC
M21
MXC
24
MXC
27
FXC
M29
XC
M34
XC
M38
MXC
XC M
XC
19
XC M
XC
21
XC M
XC
24F
XC XC
26M
XC XC
30M
XC XC
34M
XC M
37XC
47
41
36
32
28
42
36
32
48
41
36
46 INFORMATION
41
54
TECHNICAL
39
44
59
51
45
68
58
51
51
76
65
57
71
62
55
83
42
37
56
48
49
43
56
65
49
63
55
73
60
53
80
69
61
92
79
69
69
103
88
77
97
85
75
113
53
47
70
60
54
69
61
81
61
78
68
91
74
66
99
85
77
115
99
86
128 110
96
85
93
140 120 105
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.89
183
Born to Perform
Nozzles
Nozzle selection and maintenance are two of the most important aspects of
accurate and efficient pesticide application. Selecta offers the largest range of
Agricultural/Horticultural spray nozzles in Australia, incorporating the leading
brands of Lechler and Teejet, to cover all applications.
Selecta’s ceramic nozzles are renowned for their durability, accuracy and performance.
With more pesticides supplied as wettable powders spray contractors prefer ceramic
nozzles given a cheaper cost per hour of spraying (a higher initial outlay but much
longer life, relative to polymer, see wear chart). Selecta offers a comprehensive range of
ceramic nozzles, including wide Range Flat Fan/Fast Caps, Air Injected, Air Injected Off
Centre, Off Centre, Hollow Cone and Deflector Tips.
Selecta’s Lechler range offers precise German engineering, proving very popular in
the low pressure air induction market (IDK) and the under tree/ vine nozzles (IDKS).
Lechler IDK ceramic range received an innovation award at SIMA 2007, one of the
leading agricultural exhibitions in Europe
Selecta’s Teejet range from the United States
incorporates the most extensive product portfolio
including the famous Turbo Teejet family (TT’s, TTI
(induction) and Twinjets), an extensive range of
nozzle bodies and accessories and recently the
AIXR low pressure induction nozzle was released
to market with great success.
How to order
Nozzles
The tractor travel speed is the most important variable in sprayer performance. A 10%
change in tractor speed gives a 10% change in application rate. This can lead to over or
under application of chemicals. Determine the speed by measuring 100 metres then time
in seconds how long it takes to cover the 100 metres. If spraying in hilly terrain time
distance both up hill and down hill and average the results.
km/h = 360
Time in seconds for 100 metres
3. Nozzle Spacing on boom Standard nozzle spacing is 50 cm
4. To calculate required output per nozzle
L/min/nozzle =
e.g.
L/ha x km/h x nozzle spacing (cm)
60,000
100 x 10 x 50 = 0.83 L/min/nozzle
60,000
(Where application rate is: 100 L/Ha, speed is 10 km/h and nozzle spacing is 50cm)
Use the nozzle output charts to select the correct nozzle tip for your application.
5. Check the calibration procedure
Use a measuring jug and stopwatch to check the output of several nozzles
across the boom at the recommended pressure. If the outputs vary slightly from
the chart then adjust the pressure in the system to achieve the correct volume.
If nozzle flow rates are greater than 5% above or below the manufacturer’s
charts then the whole sprayer system needs to be checked for leaks, blockages
etc,cleaned out and the calibration process repeated until accuracy is attained.
If after re-checking the variance is still greater than 5%, new nozzles are
recommended. The nozzle charts also allow application rates to be determined if
the tractor speed, the nozzle and the spraying pressure are known.
p.90
Hrs (h)
0
10
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
20
30
Stainless steel
Specify Tip Type **
VS - Stainless steel with VisiFlo colour-coding*
VP - Polymer with VisiFlo colour-coding
VK - Ceramic with VisiFlo colour-coding
SS - Stainless Steel
VB - Brass with VisiFlo colour-coding*
1. Application rate in litres per hectare
2. Travel Speed of Tractor.
Test Procedure NF U.26.110
40
35
30
25
20
15
10
5
0
-5
* Available on an indent
order basis only
FACTORS AFFECTING CALIBRATION
OF BOOM SPRAYS
The formula for speed is:
Spray variation in %
Nozzle Type
40
50
60
Plastic materials
KEMATAL or
HOSTAFORM
70
80
90
100
Ceramic
Brand Name
VisiFlo®
Material
110° Spray
Angle
1.5 l/min
(0.4 GPM) nozzle
capacity rated at
2.8 bar (40 PSI)
There are many types of Teejet nozzles available with each providing
different flow rates, spray angles, droplet sizes, and patterns. Some of
these spray tip characteristics are indicated by the tip number. Each
type of spray tip is rated under different operating conditions. For
example, TeeJet® standard flat spray tips are rated in GPM (Gallons
per Minute) whereas the TX ConeJet® hollow cone tips, which have
much lower capacity, are rated in GPH (Gallons per Hour).
WIND SPEED AND SPRAYING
Wind speeds are critical when spraying. If conditions are too windy,
chemicals may not be applied correctly to the target crop leading
to poor results, increased drift and possible off target damage. The
following table offers a simple method of assessing wind speeds,
otherwise can be more accurately measured using the Selecta Wind
Meter (pg. 98)
Nozzle Care And Maintenance
Nozzles are generally considered to be the most critical component in the
spraying system chain, and yet the most neglected. Worn or damaged
nozzles result in over application of expensive chemicals, crop damage
and environmental contamination.
Nozzles should be examined and checked regularly.
Using water, check the amount as measured in the jug against nozzle
data sheet. If the value is 5% or more above that specified, replace
nozzle. Always keep a quantity of spare nozzles with the machine
for immediate replacement when necessary in the field. A visual
assessment of the nozzle discharge pattern will show up any streaking
due to damaged nozzles.
Always keep a new nozzle to one side to use as a comparison.
Blocked nozzles should be soaked in clean, warm water with a mild
detergent added if necessary, and carefully cleaned only with a soft
brush or air-line. Never attempt to clear a nozzle by blowing or attempt
to remove stubborn deposits with pins, wire or other sharp implements.
Clean all filters regularly and replace if necessary. Remember, no matter
how good the associated spray machinery, it is the nozzle quality and
condition that determines just how effectively an expensive chemical is
applied.
It is strongly recommended that nozzles are renewed once a year or
at the first signs of deterioration, whichever occurs first. The cost of
renewing a complete set of nozzles is only a fraction of the potential
costs due to chemical wastage and crop damage caused by worn and
damaged nozzles.
BOOM SPRAY CALIBRATION INFORMATION
Equipment information
Tractor
RPM
Gear
Spray plant
Pressure
CALIBRATION
TIP TESTER
Size, number & spacing of nozzles
• Fast and independent measurement
of single nozzle flow rate
Calculate speed in kilometres per hour
3.6 x metres = km/h
3.6 x
metres
= km/h
Seconds
seconds
Calculate output in litres per hectare
Total
Litres
Collect output of nozzles in litres per minute
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
6
7
8
9
10
11
12
x
m x
L.
=
km/h
LIST (EX GST)
CAT
429000
$135.65
C
TIP CLEANING BRUSH
• Excellent tool for keeping your
spray tips in peak condition
600 x litres per minute
= Litres per hectare
Boom width (m) x speed (km/h)
600
CODE
Litres per hectare
CODE
LIST (EX GST)
CAT
BRSH-039531
$14.78
C
Calculate chemical to add to tank
FILTRATION
Tank capacity (L) X chemical rate (L/ha)
Efficient filtration is an important part of every sprayer, preventing blocked
nozzles, reducing pump wear and minimising down time in the paddock.
Adequate filters should be installed at all stages of the spraying system, starting
with a coarse filter at the tank filler and progressing through to a fine filter at
the spray tip. Filter mesh is normally described in terms of the number of wires
per linear inch, which relates to the size of the apertures through which liquid
passes. The larger the mesh number the smaller the aperture and the finer the
filtration. Use 100 mesh for nozzle sizes 01 and 015, and 50 mesh for nozzle
sizes 02 and larger.
= Chemical required per tank
Output (L/ha)
Tank (Lt)
x
Output
(L/ha)
Amount of
chemical
to add
per tank
=
(L/ha)
WATER SENSITIVE PAPER
These specially coated papers are used for
evaluating spray distributions, swath widths,
droplet densities and penetration of spray.
CODE
SIZE (CM)
QTY
LIST (EX GST)
CAT
20301-1
7.6 x 2.6
50 cards
$67.83
C
20 Mesh/inch
0.6mm Aperture
80 Mesh/inch
0.18mm Aperture
30 Mesh/inch
0.4mm Aperture
100 Mesh/inch
0.14mm Aperture
50 Mesh/inch
0.3mm Aperture
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.91
Nozzle Care And Maintenance
Date
Born to Perform
12 KM/H
16 KM/H
18 KM/H
20 KM/H
25 KM/H
30 KM/H
35 KM/H
03
10 KM/H
50 Mesh*
8 KM/H
50 Mesh* 025
7 KM/H
02
6 KM/H
50 Mesh*
5 KM/H
Nozzle Application Rates
100 Mesh* 015
4 KM/H
01
CAPACITY
L/MIN.
100 Mesh*
APPLICATION RATE: LITRES PER HECTARE AT KM/H
LIQ PRES
BAR
MESH SIZE
CODE
Nozzle Application Rates
1.0
1.5
2.0
2.5
3.0
3.5
4.0
5.0
6.0
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
8.0
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
8.0
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
8.0
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
8.0
0.23
0.28
0.32
0.36
0.39
0.42
0.45
0.50
0.55
0.34
0.42
0.48
0.54
0.59
0.64
0.68
0.72
0.76
0.80
0.83
0.87
0.90
0.96
0.46
0.56
0.65
0.72
0.79
0.85
0.91
0.97
1.02
1.07
1.12
1.16
1.21
1.29
0.99
1.07
1.14
1.21
1.28
1.34
1.40
1.46
1.51
1.62
0.68
0.83
0.96
1.08
1.18
1.27
1.36
1.45
1.52
1.60
1.67
1.74
1.80
1.93
69.0
84.0
96.0
108
117
126
135
150
165
102
126
144
162
177
192
204
216
228
240
249
261
270
288
138
168
195
216
237
255
273
291
306
321
336
348
363
387
297
321
342
363
384
402
420
438
453
486
204
249
288
324
354
381
408
435
456
480
501
522
540
579
55.2
67.2
76.8
86.4
93.6
101
108
120
132
81.6
101
115
130
142
154
163
173
182
192
199
209
216
230
110
134
156
173
190
204
218
233
245
257
269
278
290
310
238
257
274
290
307
322
336
350
362
389
163
199
230
259
283
305
326
348
365
384
401
418
432
463
46.0
56.0
64.0
72.0
78.0
84.0
90.0
100
110
68.0
84.0
96.0
108
118
128
136
144
152
160
166
174
180
192
92.0
112
130
144
158
170
182
194
204
214
224
232
242
258
198
214
228
242
256
268
280
292
302
324
136
166
192
216
236
254
272
290
304
320
334
348
360
386
39.4
48.0
54.9
61.7
66.9
72.0
77.1
85.7
94.3
58.3
72.0
82.3
92.6
101
110
117
123
130
137
142
149
154
165
78.9
96.0
111
123
135
146
156
166
175
183
192
199
207
221
170
183
195
207
219
230
240
250
259
278
117
142
165
185
202
218
233
249
261
274
286
298
309
331
34.5
42.0
48.0
54.0
58.5
63.0
67.5
75.0
82.5
51.0
63.0
72.0
81.0
88.5
96.0
102
108
114
120
125
131
135
144
69.0
84.0
97.5
108
119
128
137
146
153
161
168
174
182
194
149
161
171
182
192
201
210
219
227
243
102
125
144
162
177
191
204
218
228
240
251
261
270
290
27.6
33.6
38.4
43.2
46.8
50.4
54.0
60.0
66.0
40.8
50.4
57.6
64.8
70.8
76.8
81.6
86.4
91.2
96.0
100
104
108
115
55.2
67.2
78.0
86.4
94.8
102
109
116
122
128
134
139
145
155
119
128
137
145
154
161
168
175
181
194
81.6
100
115
130
142
152
163
174
182
192
200
209
216
232
23.0
28.0
32.0
36.0
39.0
42.0
45.0
50.0
55.0
34.0
42.0
48.0
54.0
59.0
64.0
68.0
72.0
76.0
80.0
83.0
87.0
90.0
96.0
46.0
56.0
65.0
72.0
79.0
85.0
91.0
97.0
102
107
112
116
121
129
99.0
107
114
121
128
134
140
146
151
162
68.0
83.0
96.0
108
118
127
136
145
152
160
167
174
180
193
17.3
21.0
24.0
27.0
29.3
31.5
33.8
37.5
41.3
25.5
31.5
36.0
40.5
44.3
48.0
51.0
54.0
57.0
60.0
62.3
65.3
67.5
72.0
34.5
42.0
48.8
54.0
59.3
63.8
68.3
72.8
76.5
80.3
84.0
87.0
90.8
96.8
74.3
80.3
85.5
90.8
96.0
101
105
110
113
122
51.0
62.3
72.0
81.0
88.5
95.3
102
109
114
120
125
131
135
145
15.3
18.7
21.3
24.0
26.0
28.0
30.0
33.3
36.7
22.7
28.0
32.0
36.0
39.3
42.7
45.3
48.0
50.7
53.3
55.3
58.0
60.0
64.0
30.7
37.3
43.3
48.0
52.7
56.7
60.7
64.7
68.0
71.3
74.7
77.3
80.7
86.0
66.0
71.3
76.0
80.7
85.3
89.3
93.3
97.3
101
108
45.3
55.3
64.0
72.0
78.7
84.7
90.7
96.7
101
107
111
116
120
129
13.8
16.8
19.2
21.6
23.4
25.2
27.0
30.0
33.0
20.4
25.2
28.8
32.4
35.4
38.4
40.8
43.2
45.6
48.0
49.8
52.2
54.0
57.6
27.6
33.6
39.0
43.2
47.4
51.0
54.6
58.2
61.2
64.2
67.2
69.6
72.6
77.4
59.4
64.2
68.4
72.6
76.8
80.4
84.0
87.6
90.6
97.2
40.8
49.8
57.6
64.8
70.8
76.2
81.6
87.0
91.2
96.0
100
104
108
116
11.0
13.4
15.4
17.3
18.7
20.2
21.6
24.0
26.4
16.3
20.2
23.0
25.9
28.3
30.7
32.6
34.6
36.5
38.4
39.8
41.8
43.2
46.1
22.1
26.9
31.2
34.6
37.9
40.8
43.7
46.6
49.0
51.4
53.8
55.7
58.1
61.9
47.5
51.4
54.7
58.1
61.4
64.3
67.2
70.1
72.5
77.8
32.6
39.8
46.1
51.8
56.6
61.0
65.3
69.6
73.0
76.8
80.2
83.5
86.4
92.6
9.2
11.2
12.8
14.4
15.6
16.8
18.0
20.0
22.0
13.6
16.8
19.2
21.6
23.6
25.6
27.2
28.8
30.4
32.0
33.2
34.8
36.0
38.4
18.4
22.4
26.0
28.8
31.6
34.0
36.4
38.8
40.8
42.8
44.8
46.4
48.4
51.6
39.6
42.8
45.6
48.4
51.2
53.6
56.0
58.4
60.4
64.8
27.2
33.2
38.4
43.2
47.2
50.8
54.4
58.0
60.8
64.0
66.8
69.6
72.0
77.2
7.9
9.6
11.0
12.3
13.4
14.4
15.4
17.1
18.9
11.7
14.4
16.5
18.5
20.2
21.9
23.3
24.7
26.1
27.4
28.5
29.8
60.9
32.9
15.8
19.2
22.3
24.7
27.1
29.1
31.2
33.3
35.0
36.7
38.4
39.8
41.5
44.2
33.9
36.7
39.1
41.5
43.9
45.9
48.0
50.1
51.8
55.5
23.3
28.5
32.9
37.0
40.5
43.5
46.6
49.7
52.1
54.9
57.3
59.7
61.7
66.2
* Recommended nozzle filter mesh size
p.92
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Nozzle Application Rates
MESH
SIZE
50
Mesh*
50
Mesh*
50
Mesh*
50
Mesh*
50
Mesh*
04
05
06
08
10
15
LIQ
PRES
BAR
CAPACITY
L/MIN.
APPLICATION RATE: LITRES PER HECTARE AT KM/H
4
KM/H
5
KM/H
6
KM/H
7
KM/H
8
KM/H
10
KM/H
12
KM/H
16
KM/H
18
KM/H
20
KM/H
25
KM/H
30
KM/H
35
KM/H
1.0
0.91
273
218
182
156
137
109
91.0
68.3
60.7
54.6
43.7
36.4
31.2
1.5
1.12
336
269
224
192
168
134
112
84.0
74.7
67.2
53.8
44.8
38.4
2.0
1.29
387
310
258
221
194
155
129
96.8
86.0
77.4
61.9
51.6
44.2
2.5
1.44
432
346
288
247
216
173
144
108
96.0
86.4
69.1
57.6
49.4
3.0
1.58
474
379
316
271
237
190
158
119
105
94.8
75.8
63.2
54.2
3.5
1.71
513
410
342
293
257
205
171
128
114
103
82.1
68.4
58.6
4.0
1.82
546
437
364
312
273
218
182
137
121
109
87.4
72.8
62.4
4.5
1.94
582
466
388
333
291
233
194
146
129
115
93.1
77.6
66.5
5.0
2.04
612
490
408
350
306
245
204
153
136
122
97.9
81.6
69.9
5.5
2.14
642
514
428
367
321
257
214
161
143
128
103
85.6
73.4
6.0
2.23
669
535
446
382
335
268
223
167
149
134
107
89.2
76.5
6.5
2.33
699
559
466
399
350
280
233
175
155
140
112
93.2
79.9
7.0
2.41
725
578
482
413
362
289
241
181
161
145
116
96.4
82.6
8.0
2.58
774
619
516
442
387
310
258
194
172
155
124
103
88.5
1.00
1.14
342
274
228
195
171
137
114
85.5
76.0
68.4
54.7
45.6
39.1
1.5
1.39
417
334
278
238
209
167
139
104
92.7
83.4
66.7
55.6
47.7
2.0
1.61
483
386
322
276
242
193
161
121
107
96.6
77.3
64.4
55.2
2.5
1.80
540
432
360
309
270
216
180
135
120
108
86.4
72.0
61.7
3.0
1.97
591
473
394
338
296
236
197
148
131
118
94.6
78.38
67.5
3.5
2.13
639
511
426
365
320
256
213
160
142
128
102
85.2
73.0
4.0
2.27
681
545
454
389
341
272
227
170
151
136
109
90.8
77.8
4.5
2.41
723
578
482
413
362
289
241
181
161
145
116
96.4
82.6
87.1
5.0
2.54
762
610
508
435
381
305
254
191
169
152
122
102
5.5
2.67
801
641
534
458
401
320
267
200
178
160
128
107
91.5
6.0
2.79
837
670
558
478
416
335
279
209
186
167
134
112
95.7
99.4
6.6
2.90
870
696
580
497
435
348
290
218
193
174
139
116
7.0
3.01
903
722
602
516
452
361
301
226
201
181
144
120
103
8.0
3.22
966
773
644
552
483
386
322
242
215
193
155
129
110
1.0
1.37
411
329
274
235
206
164
137
103
91.3
82.2
65.8
54.8
47.0
1.5
1.68
504
403
336
288
252
202
168
126
112
101
80.6
67.2
57.6
2.0
1.94
582
466
388
333
291
233
194
146
129
116
93.1
77.6
66.5
2.5
2.16
648
518
432
370
324
259
216
162
144
130
104
86.4
74.1
3.0
2.37
711
569
474
406
356
284
237
178
158
142
114
94.8
81.3
3.5
2.56
768
614
512
439
384
307
256
192
171
154
123
102
87.8
4.0
2.74
822
658
548
470
411
329
274
206
183
164
132
110
93.9
1.0
1.82
546
437
364
312
273
218
182
137
121
109
87.4
72.8
62.4
1.5
2.23
669
535
446
382
335
268
223
167
149
134
107
89.2
76.5
2.0
2.58
774
619
516
442
387
310
258
194
172
155
124
103
88.5
2.5
2.88
864
691
576
494
432
346
288
216
192
173
138
115
98.7
3.0
3.16
948
758
632
542
474
379
316
237
211
190
152
126
108
3.5
3.41
1023
818
682
585
512
409
341
256
227
205
164
136
117
4.0
3.65
1095
876
730
626
548
438
365
274
243
219
175
146
125
1.0
2.28
684
547
456
391
342
274
228
171
152
137
109
91.2
78.2
95.7
1.5
2.79
837
670
558
478
419
335
279
209
186
167
134
112
2.0
3.23
969
775
646
554
485
388
323
242
215
194
155
129
111
3.0
3.95
1185
948
790
677
593
474
395
296
263
237
190
158
135
4.0
4.56
1368
1094
912
782
684
547
456
342
304
274
219
182
156
1.0
3.42
1026
821
684
586
513
410
342
257
228
205
164
137
117
1.5
4.19
1257
1006
838
718
629
503
419
314
279
251
201
168
144
2.0
4.83
1449
1159
966
828
725
580
483
362
322
290
232
193
166
3.0
5.92
1776
1421
1184
1015
888
710
592
444
395
355
284
237
203
4.0
6.84
2052
1642
1368
1173
1026
821
684
513
456
410
328
274
235
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.93
Nozzle Application Rates
50
Mesh*
CODE
Born to Perform
Nozzles
Pictured:
TP11002VP
VISIFLO FLAT FAN STANDARD
Features tapered edge wide angle flat spray pattern for uniform
coverage in broadcast spraying. VisiFlo colour coded polymer or ceramic
nozzles available in 80 or 100 degrees spray angles in selected sizes.
Also available in Brass construction with 65 or 80 degrees spray angles.
80º
110º
NOZZLE
Spray pattern
Nozzles
2 bar
4 bar
TIP TYPE
DESCRIPTION
LIST (EX GST)
CAT
TP
Poly
Visiflo Flat Fan
$1.65
C
PKT-TP
Poly
Visiflo Flat Fan - Pack of 10
$20.00
C
*110º only offered in packets
XR EXTENDED RANGE
• Excellent spray distribution over a wide range of pressures 1-4 bar (15-60 psi)
• Ideal for rigs equipped with sprayer controllers
• Reduces drift at lower pressures, better coverage at higher pressures but more prone to drift
• Available with VisiFlo colour coding in ceramic and stainless for the 80° spray angle and ceramic,
polymer and stainless in the 110° spray angle
Pictured:
XR110015-VP
80º
110º
For the ISO nozzle application rate chart see pages 100-101
NOZZLE
Spray pattern
1 bar
4 bar
TIP TYPE
DESCRIPTION
LIST (EX GST)
CAT
XR-VP
Poly
VisiFlo Extended Range
$4.87
C
XR-VK
Ceramic
VisiFlo Extended Range
$7.74
C
PKT-XR-VP
Poly
VisiFlo Extended - Pack of 10 Range
$48.70
C
XRC EXTENDED RANGE
• Excellent spray distribution over a wide range of pressures 1-4 bar (15-60 psi)
• Ideal for rigs equipped with sprayer controllers
• Reduces drift at lower pressures, better coverage at higher
pressures but more prone to drift
• Available in 110° ceramic, sizes 02-08
• XR TeeJet tip molded into Quick TeeJet cap provides automatic spray alignment
• Includes tightly fitting washer assures a good seal
Pictured:
For the ISO nozzle application rate chart see pages 100-101
XRC11004-VK
80º
110º
Spray pattern
1 bar
p.94
4 bar
NOZZLE
TIP TYPE
DESCRIPTION
LIST (EX GST)
CAT
XRC-VK
Ceramic
VisiFlo Extended Range
$12.17
B
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Nozzles
DRIFT GUARD SPRAY TIPS
Pictured:
DG11004-VS
• Pre-orifice design produces larger droplets and reduces the small
drift prone droplets, minimising off-target spray contamination.
• Tapered edge flat spray pattern provides uniform coverage when
adjacent nozzle patterns are overlapped in broadcast spraying.
• The colour-coded pre-orifice is removable for any necessary cleaning operations
• 110° spray angles
• Automatic spray alignment with 25612-*-NYR Quick TeeJet cap and gasket
How to order
Specify Tip Type** Eg. DG11002-VP Polymer with VisiFlo colour-coding
DG8002-VS Stainless Steel with VisiFlo colour-coding 80° only available in VS stainless steel
NOZZLE
TIP TYPE
DESCRIPTION
LIST (EX GST)
CAT
DG-VP
Poly
Drift Guard
$8.70
C
TURBO TEEJET FLAT SPRAY TIPS
• Tapered edge wide angle pattern for uniform coverage in broadcast spraying.
• Poly nozzle with large, rounded internal passage to minimise clogging.
• Larger droplets for less drift—20–90 psi
(1.5–6 BAR)
• Automatic spray alignment with
25612-*-NYR Quick TeeJet cap and gasket.
Pictured:
TT11003-VP
Nozzles
Wider Pressure range
(1-6) Bar means greater
Application Flexibility
Practical design means
compatibility with standard
flat spray caps
Blockage free passage
means less clogging
High Tech design means
maximum drift management
Unique internal configuration means
substantially longer wear life
Unparalleled distribution means
optimum chemical performance
NOZZLE
TIP TYPE
DESCRIPTION
LIST (EX GST)
CAT
TT
Poly
Turbo Teejet
$9.57
C
PKT-TT
Poly
Turbo Teejet - Pack of 10
$104.35
C
TURBO TWINJET SPRAY TIPS
Pictured:
TTJ60-11003VP
• All the features of the TT Turbo Teejet, but with a double outlet nozzle that helps reduce spray drift
• Excellent canopy coverage and penetration while delivering excellent drift resistance
• Spraying pressure 1.5 - 6 bar, ideal for use with automatic sprayrate controllers
• Best suited to applications where superior leaf coverage and canopy penetration is important
C
For the ISO nozzle application rate chart see pages 100-101
NOZZLE
TIP TYPE
DESCRIPTION
LIST (EX GST)
CAT
TTJ
Poly
Turbo Twinjet
$11.30
C
bar
TTJ60-11002
TTJ60-110025
TTJ60-11003
TTJ60-11004
TTJ60-11005
TTJ60-11006
TURBO TWINJET (TTJ60)
1.5 2 2.5 3.5 4 4.5
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
5
5.5
6
p.95
Drift Reducing Air Induction Nozzles Born to Perform
NOZZLE
TIP TYPE
DESCRIPTION
LIST (EX GST)
CAT
IDKS
Poly
Air Injected
$12.75
C
Note: Non ISO flow rates
1
1.5
2
3
4
5
6
7
0.42
0.48
0.59
0.68
0.76
0.83
1.10
0.70
0.81
0.99
1.15
1.28
1.40
2.74
0.69
0.84
0.97
1.19
1.37
1.53
1.68
3.68
IDKS 80-05
0.56
0.65
0.80
0.92
1.03
1.13
1.82
IDKS 80-04
• Air injected flat-jet nozzle, 80º spraying
angle made of wear and chemical-resistant POM
• Pressure range: IDKS 04 and 05: 1.0 to 6.0 bar
• Asymmetrical spray pattern (20º/60º to the axis)
• Drop spectrum medium to very coarse
IDKS 80-03
CODE
For band/row spraying and as an end nozzle
IDKS 80-025
LITRES PER MINUTE
IDKS 80-02
BAR
IDKS AIR INJECTED NOZZLES
0.91
1.12
1.29
1.58
1.82
2.04
2.23
4.58
AIXR AIR INDUCTION SPRAY TIPS
How to order
Nozzles
Specify Tip Type ** Eg. AIXR110**VP
• 110° wide, tapered flat spray angle with air induction
technology offers better drift management
• Made of a two-piece polymer construction. Excellent chemical
resistance, including acids, as well as exceptional wear life
• A lower pressure air inducted nozzle suitable for the broadacre market
• Compact size to prevent tip damage
• Depending on the chemical, produces large air-filled drops
through a Venturi air aspirator.
Pictured:
• Removable pre-orifice
AIXR11002-VP
• Pressure range 1-6 bar (15-90 psi)
• Automatic alignment when used with 25612-*-NYR Quick TeeJet® cap and gasket
Reference page 94 for more information
NOZZLE
TIP TYPE
DESCRIPTION
LIST (EX GST)
CAT
AIXR-VP
Poly
Air induction
$11.82
C
AI AIR INDUCTION SPRAY TIPS
• Stainless steel insert produces tapered edge flat spray
110º pattern for uniform coverage in broadcast spraying
• Polymer insert holder and pre-orifice with VisiFlo colour-coding
• Larger droplets for less drift
• Depending on the chemical, produces large air-filled drops through the use
of a venturi air aspirator
For the ISO nozzle application rate chart see pages 100-101
NOZZLE
TIP TYPE
DESCRIPTION
LIST (EX GST)
CAT
AI
Stainless Steel
Air Induction
$21.82
C
AIC AIR INDUCTION SPRAY TIPS
How to order
Specify Tip Type ** Eg. AIC11004-VS (Pictured In red)
Stainless steel with VisiFlo colour-coding
AIC11003-VP Polymer with VisiFlo colour-coding
AIC11003-VK Ceramic with VisiFlo colour-coding
p.96
• Available in stainless steel, ceramic and polymer inserts,
produces tapered edge flat spray pattern for uniform
coverage in broadcast spraying
• Polymer insert holder and pre-orifice with VisiFlo colour-coding
• Larger droplets for less drift
• Depending on the chemical, produces large air-filled drops through the use of a Venturi air aspirator
• AI TeeJet nozzle molded into Quick TeeJet cap provides automatic spray alignment
• Includes tightly fitting washer that stays put and assures a good seal
NOZZLE
TIP TYPE
DESCRIPTION
LIST (EX GST)
CAT
AIC-VP
Poly
VisiFlo Extended Range
$10.91
C
AIC-VK
Ceramic
VisiFlo Extended Range
$18.18
C
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Nozzles
TURBO TEEJET INDUCTION FLAT SPRAY TIPS
• Compact size to prevent tip damage and removable pre-orifice for easy cleaning
• Large droplets are produced through a venturi air aspirator resulting in less drift
• Wide operating pressure 1-7bar producing Extra Coarse droplets
• Ideal for use with automatic rate controllers or the ISO nozzle application
rate chart see pages 80-81
NOZZLE
TIP TYPE
DESCRIPTION
LIST
(EX GST)
CAT
TTI
Poly
Turbo Teejet Induction
$10.43
C
Pictured:
TTI11003-VP
* REFER TO PAGE 109 FOR CAP SELECTION
IDK AIR INJECTED NOZZLE
Liquid
Injector
Nozzle Body
Air
Air
• Air-aspirating flat-spray tip.
• Pressure Range: - Spray angle120º all Poly nozzle
- IDK-01 to 03 1.5 - 6 bar
- IDK-04 to 05 1 - 6 bar
• More suitable for lower pressures
• Hard-wearing and non-clogging thanks
Pictured: IDK12004P
to lateral air-aspirating channels of ample size
NEW CERAMIC RANGE
NOW AVAILABLE
TIP TYPE
LIST (EX GST)
CAT
IDK120**P
Poly
$11.30
C
Twinjet Nozzles
NOZZLE
Off Centre Nozzles
BRASS OFF CENTRE - SMALL CAPACITY
Selecta small capacity brass off-centre spray tips are commonly installed in
double and single swivel nozzle bodies. Because these bodies are adjustable
for angular position, a wide spray swath is easily obtained.
G8259139 2.0
3.0
OC-02*
4.0
0.65
0.79
0.91
HEIGHT = 45CM
I/HA
WIDTH 4
6
8
(CM)
KM/H KM/H KM/H
172
56.7 37.8 28.3
177
66.9 44.6 33.5
182
75.0 50.0 37.5
2.0
G8259140
3.0
OC-03*
4.0
0.96
1.18
1.36
195
203
208
73.8
87.2
98.1
49.2
58.1
65.4
36.9
43.6
49.0
29.5
34.9
39.2
203
210
215
70.9
84.3
94.9
47.3
56.2
63.3
35.5 28.4
42.1 33.7
47.4 38.0
$16.52
C
$20.00
C
2.0
G8259141
3.0
OC-04*
4.0
1.29
1.58
1.82
231
236
238
83.8
100
115
55.8
66.9
76.5
41.9
50.2
57.4
33.5
40.2
45.9
236
238
241
82.0
99.6
113
54.7
66.4
75.5
41.0 32.8
49.8 39.8
56.6 45.3
$16.52
C
$20.00
C
2.0
G8259142
3.0
OC-06*
4.0
1.94
2.37
2.74
251
256
259
116
139
159
77.3
92.6
106
58.0
69.4
79.3
46.4
55.5
63.5
274
279
281
106
127
146
70.8
84.9
97.5
53.1 42.5
63.7 51.0
73.1 58.5
$16.52
C
$20.00
C
2.0
G8259180
3.0
OC-08*
4.0
2.58
3.16
3.65
254
259
264
152
183
207
102
122
138
76.2
91.5
104
60.9
73.2
83.0
279
284
287
139
167
191
92.5
111
127
69.4 55.5
83.5 66.8
95.4 76.3
$16.52
C
$20.00
C
2.0
G8259181
3.0
OC-12*
4.0
3.87
4.74
5.47
259
264
266
224
269
308
149
180
206
112
135
154
89.7
108
123
287
292
294
202
243
279
135
162
186
101
122
140
80.9
97.4
112
$16.52
C
$20.00
C
2.0
G8259182
3.0
OC-16*
4.0
5.16
6.32
7.30
335
350
363
231
271
302
154
181
201
116
135
151
92.4
108
121
360
370
375
215
256
292
143
171
195
108
128
146
86.0
102
117
$16.52
C
$20.00
C
CODE
BAR
L/MIN
HEIGHT = 60CM
I/HA
10
WIDTH 4
6
8
KM/H (CM)
KM/H KM/H KM/H
22.7 190
51.3 34.2 25.7
26.8 195
60.8 40.5 30.4
30.0 198
68.9 46.0 34.5
LIST
(EX GST)
10
KM/H
20.5 $16.52
24.3
27.6 $20.00
CAT
C
C
Pictured: G8259139
* Teejet Brass off-centre jet
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.97
Born to Perform
Nozzles
B
XP BOOMJET BOOMLESS FLAT SPRAY
B
A
Type 5880 Boomjet Nozzle is used for spraying areas not easily accessed with a boom sprayer. It
combines two off-centre tips and three VeeJet nozzles to produce an overall wide swath flat spray.
The nozzle assembly provides good distribution considering the wide pattern coverage obtained:
however the uniformity is not as good as with a properly operated boom sprayer. Uniformity can be
optimised by double overlapping spray swaths on successive sprayer passes. Remember this also
doubles the application volume.
Supplied with one additional 1/4” NPT pipe plug
and one blank tip for setting BoomJet to one side
only. Also has a 1/4” NPT pressure gauge port
A
C
NOZZLE
A
CODE
Nozzles
5880-3/4-2TOC06
5880-3/4-2TOC10
5880-3/4-2TOC20
5880-3/4-2TOC40
#6733-OC06
OC-10
OC-20
OC-40
NOZZLE
B
H1/4VV-1506
H1/4U-0508HE
H1/4U-0520HE
H1/4U-0540HE
NOZZLE
C
H1/4VVL-9502 with
50 mesh strainer
H1/4VV-11004 with
50 mesh strainer
H1/4VVL-9506 with
50 mesh strainer
H1/4U-9510 with
50 mesh strainer
BAR
L/MIN
WIDTH
(M)
6
KM/H
I/HA
8
12
KM/H KM/H
16
KM/H
LIST
CAT
24
(EX GST)
KM/H
1.5
7.26
10.2
71.2
53.4
26.7
17.8
35.6
2.0
8.38
10.3
81.4
61.0
40.7
30.5
20.3
2.5
9.37
10.5
89.2
66.9
44.6
33.5
22.3
1.5
11.16
12.0
93.0
69.8
46.5
34.9
23.3
2.0
12.89
12.1
107.0
79.9
53.3
39.9
26.3
2.5
14.41
12.3
117.0
87.9
58.6
43.9
29.3
1.5
24.00
14.3
168.0
126.0
83.9
62.9
42.0
2.0
27.72
15.2
182.0
137.0
91.2
68.4
45.6
2.5
30.99
15.8
196.0
147.0
98.1
73.6
49.0
1.5
47.44
17.1
277.0
208.0
139.0
104.0
69.4
2.0
54.78
18.2
300.01
226.0
150.0
113.0
75.2
2.5
61.25
19.2
319.0
239.0
160.0
120.0
79.8
$443.48
B
$443.48
B
$443.48
B
$443.48
B
ANEMOMETER
4 IN 1 WEATHER METER
• Wind speed (mph, km/h, m/s, Knots)
• Displays max & average wind speed
• Beaufort scale bar graph (0-12)
• Wind chill (°F or °C), Temperature (°F or °C)
• Backlight with auto off &
battery saving auto off
• 0.2m/s to 30m/s speed
* Display panel configuration may vary
• Displays current, maximum and average windspeed
• Measures windspeed in Km/h (0.8 - 72), knots (0.4 - 38.8), mph (0.5 - 44.7),
m/seconds (1.1 - 20), ft/min (60 - 3937) and Beaufort (1 - 8)
• Temperature displayed in °Celsius or °Fahrenheit
• Comes with lithium battery and carry strap
Pictured: 118-461
A pocket sized high quality weather meter that measures
windspeed, temperature (including windchill, heat index and dew
point), relative humidity and atmospheric pressure. Also features a
severe weather alarm that sounds if there is a dramatic change in
air pressure within a 3-hour period.
This portable hand held anemometer
accurately measures windspeed,
including windchill and temperature.
Pictured:
118-453
CODE
DESCRIPTION
LENGTH
WIDTH
HEIGHT
WEIGHT
LIST (EX GST)
CAT
118-453
Anemometer
98mm
39mm
19mm
55g
$111.30
A
118-461
4 in 1 Weather Meter
145mm
45mm
20mm
90g
118-463
Replacement Battery suit both models
p.98
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
$267.83
A
$4.43
C
Nozzles - Horticultural
LURMARK DEFLECTIP 80º - 145º
The Lurmark Deflectip or flood spray tip produces a wide angled spray pattern
from 80-145 degrees commonly used for band spraying and also widely used in
Knapsacks. ( Do not confuse this nozzle with the similar looking Polijet nozzle). These
nozzles were previously listed as AN 0.5 to AN 20.
The Lurmark DT nozzles have the same output as the old sized AN0.5 - AN20 nozzles,
but when the change to ISO sizes and colours was brought into effect in the mid
1990’s, they were rebranded as Deflectip or DT nozzles.
The Lurmark Deflectip produces a wide angled even spray (from 80 to 145
degrees depending on pump pressure) making it ideal for banding pre and post
emergent herbicides.
Pictured: LC-15
• Large orifice produces coarser droplets which are less prone to drift and blocking
• Smaller sizes recommended for use on knapsacks
• Fits in most nozzle caps
• Precision moulded in tough and durable polyacetal, with a spray angle tolerance of +/- 5%
PART NO.
(MESH #)
BCPC
CODE
SPRAY
ANGLE
LC-15
D/O.68/1
105º
D/O.91/1
105º
PRESSURE
(BAR)
FLOW
(L/MIN)
APPLICATION RATES (L/HA) AT KM/H @ 100CM SPACINGS
10 KM/H
41
12 KM/H
34
14 KM/H
29.5
16 KM/H
25.5
20 KM/H
20.5
Coarse
1.00
0.68
Medium
1.50
0.84
50.5
42
36
31.5
28
25.5
Medium
2.00
0.97
58
48.5
41.5
36.5
32
29
Medium
2.50
1.08
65
54
46.5
40.5
36
32.5
Coarse
1.00
0.91
54.5
45.5
39
34
30.5
27.5
Medium
1.50
1.12
67.5
56
48
42
37.5
33.5
Medium
2.00
1.29
77.5
64.5
55.5
48.5
43
38.5
Medium
2.50
1.44
86.5
72
62
54
48
43.5
HOLLOW CONE NOZZLES
ALSO AVAILABLE AS
HCI 40° HOLLOW CONE CERAMIC
CAPACITY: L/MIN AT PRESSURE (BAR)
CODE
HOLLOW CONE COLOUR
HCC005
WHITE
HCC0075
LILAC
HCC01
BROWN
HCC015
YELLOW
HCC02
ORANGE
HCC025
RED
HCC035
GREEN
HCC04
Black
HCC05
BLUE
TIP TYPE
3 BAR
0.19
0.3
0.4
0.6
0.8
1
1.4
1.6
2
LIST
(EX GST)
CAT
$5.74
C
$5.74
C
DROPLET SIZE COLOUR REFERENCE
The Ceramic Hollow cone nozzles are designed for creating small droplets ideal for
foliar of insecticides and fungicides. These hollow cone type nozzles are constructed
with a moulded outer over a ceramic insert that is mated to a turbulence chamber
and counter-swirling device easily separated for cleaning. The ceramic nozzle allows
for long lasting life and the vortexing action in the nozzle provides a 80° between 3-5
bar, but works well at both high and low operation pressures. The ceramic hollow
cone nozzles are the offered alternative to the Albuz ATR Hollow cone nozzles.
NOZZLE
18 KM/H
23
Ideal for airblast!
HOLLOW CONE CERAMIC NOZZLES 800
1 BAR = (14.504) PSI
4 BAR
6 BAR
8 BAR
10 BAR
0.22
0.27
0.31
0.35
0.35
0.42
0.49
0.55
0.46
0.57
0.65
0.73
0.69
0.58
0.98
1.1
0.92
1.13
1.31
1.46
1.15
1.41
1.63
1.83
1.62
1.98
2.29
2.56
1.85
2.26
2.61
2.92
2.31
2.83
3.27
3.65
DESCRIPTION
VERY FINE
FINE
MEDIUM
COARSE
VERY COARSE
EXTRA COARSE
bar
WHITE
LILAC
BROWN
YELLOW
ORANGE
RED
GREY
GREEN
BLACK
BLUE
12 BAR
0.38
0.6
0.8
1.2
1.6
2
2.8
3.2
4
15 BAR
0.42
0.67
0.89
1.34
1.79
2.24
3.13
3.58
4.47
ASJ DROPLET SIZE
3
4
5
7
10
15
EQUIVALENT TO NOZZLE
ATR-03
ATR-04
ATR-06
ATR-08
ATR-12
ATR-16
ATR-20
ATR-25
ATR-28
LIST (EX GST)
CAT
HCC
Poly/Ceramic orifice
Hollow Cone
$10.00
C
HCI
Poly/Ceramic orifice
Hollow Cone 40°
$10.00
C
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.99
Nozzles - Horticultural
LC-20
BCPC SPRAY
QUALITY
Born to Perform
Hollow Cone Spray Tips
Typical Applications
Excellent: Post – Emergence Contact herbicides, fungicides and insecticides
to ensure finely atomised spray droplets reach target areas. Good: with
defoliants and foliar fertilisers at 3 bar pressure and above. VisiFlo colourcoded version consists of stainless steel or ceramic orifice in polypropylene
body. Maximum operating pressure 20 bar. Spray angle is 80º at 7 bar. Finely
atomised spray pattern provides thorough coverage. Also available
TX-VS1 and TX-VS2 (not shown).
NOZZLE
MATERIAL
DESCRIPTION
LIST (EX GST) CAT
TX-VK
Ceramic
Visiflo Hollow Cone
$11.30
C
TX-VS
Stainless Steel
Visiflo Hollow Cone
$11.82
C
CODE
BAR
L/MIN
4 KM/H
5 KM/H
6 KM/H
7 KM/H
8 KM/H
10 KM/H
12 KM/H
16 KM/H
18 KM/H
5
0.25
60.0
50.0
42.9
37.5
33.3
30.0
25.0
21.4
18.8
7
0.28
67.2
56.0
48.0
42.0
37.3
33.6
28.0
24.0
21.0
10
0.33
79.2
66.0
56.6
49.5
44.0
39.6
33.0
28.3
24.8
15
0.39
93.6
78.0
66.9
58.5
52.0
46.8
39.0
33.4
29.3
20
0.45
108
90.0
77.1
67.5
60.0
54.0
45.0
38.6
33.8
5
0.33
79.2
66.0
56.6
49.5
44.0
39.6
33.0
28.3
24.8
7
0.39
93.6
78.0
66.9
58.5
52.0
46.8
39.0
33.4
29.3
10
0.45
108
90.0
77.1
67.5
60.0
54.0
45.0
38.6
33.8
15
0.55
132
110
94.3
82.5
73.3
66.0
55.0
47.1
41.3
20
0.62
149
124
106
93.0
82.7
74.4
62.0
53.1
46.5
5
0.50
120
100
85.7
75.0
66.7
60.0
50.0
42.9
37.5
7
0.58
139
116
99.4
87.0
77.3
69.6
58.0
49.7
43.5
10
0.68
163
136
117
102
90.7
81.6
68.0
58.3
51.0
15
0.82
197
164
141
123
109
98.4
82.0
70.3
61.5
20
0.93
223
186
159
040
124
112
93.0
79.7
69.8
5
0.67
161
134
115
101
89.3
80.4
67.0
57.4
50.3
59.3
How to order
Hollow Cone Spray Tips
Specify Tip Type **
Eg. TX-VK4 Ceramic with VisiFlo
colour coding
TX-**3
(100 MESH)*
* Recommended nozzle
filter mesh size
** Specify Tip Type.
eg TX-VK26 (Pictured)
TX-**4
(50 MESH)*
TX-**6
(50 MESH)*
TX-**8
(50 MESH)*
ALSO AVAILABLE
AITX CONEJET
AIR INDUCTION
HOLLOW CONE
SPRAY TIPS
$21.74
LIST (EX GST)
TX-**10
(50 MESH)*
TX-**12
(50 MESH)*
TX-**18
(50 MESH)*
TX-**26
(50 MESH)*
p.100
L/HA
7
0.79
190
158
135
119
105
94.8
79.0
67.7
10
0.93
223
186
159
140
124
112
93.0
79.7
69.8
15
1.10
264
220
189
165
147
132
110
94.3
82.5
20
1.30
312
260
223
195
173
156
130
111
97.5
5
0.84
202
168
144
126
112
101
84.0
72.0
63.0
7
0.98
235
196
168
147
131
118
98.0
84.0
73.5
10
1.20
288
240
206
180
160
144
120
103
90.0
15
1.40
336
280
240
210
184
168
140
120
105
20
1.60
384
320
274
240
213
192
160
137
120
5
1.00
240
200
171
150
133
120
100
85.7
75.0
7
1.20
288
240
206
180
160
144
120
103
90.0
10
1.40
336
280
240
210
187
168
140
120
105
15
1.70
408
340
291
255
227
204
170
146
128
20
2.00
480
400
343
300
267
240
200
171
150
5
1.50
360
300
257
225
200
180
150
129
113
7
1.80
432
360
309
270
240
216
180
154
135
10
2.20
528
440
377
330
293
264
220
189
165
15
2.60
624
520
446
390
347
312
260
223
195
20
3.00
720
600
514
450
400
360
300
257
225
5
2.20
528
440
377
330
293
264
220
189
165
7
2.60
624
520
446
390
347
312
260
223
195
10
3.10
744
620
531
465
413
372
310
266
233
15
3.80
912
760
651
570
507
456
380
326
285
20
4.40
1056
880
754
660
587
528
440
377
330
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Nozzle Accessories & Caps
Nozzle Accessories & Caps
Selecta self aligning nozzle caps are designed to fit all popular brands of spray tips including fan, cone, anvil and other
specialised nozzles. They are colour coded and fit all types of Silvan Selecta nozzle holders. Cap sealing gaskets are
manufactured from chemical resistant EPDM material. Maximum operating pressure 30 Bar (435 PSI).
FOR USE WITH SPRAY TIPS
(REFERENCE GUIDE ONLY)
COLOUR
CAPS
CAP & GASKET
CODE
LIST
(EX GST)
CAT
GASKET
ONLY CODE
LIST
(EX GST)
CAT
TEEJET® FLAT SPRAY TIPS
LURMARK FLAT FAN TIPS ALBUZ
FLAT FAN TIPS (FITS SIZES 01 TO
08) LECHLER IDK
G8253000
(Gasket code)
G8253000-PK*(6pk)
$2.00
$10.91
C
402200-040
$1.13
C
ALBUZ AVI-OC
ALBUZ APE-EXA
ALBUZ AVI
ALBUZ ESI
G8253004
$2.00
C
402200-040
$1.13
C
ALBUZ APM
TK FLOODJET
TG FULL CONE
FL FULL JET
G8253012
$2.00
C
402200-040
$1.13
C
ALBUZ APT-ATR-AMPT
(CERAMIC), HCC HOLLOW
CONES
G8253020
$1.24
C
402200-040
$1.13
C
G8253040
Not supplied with
gasket
$1.28
C
402200-040
$1.13
C
PROVIDES BLANKING
SHUT-OFF OF NOZZLE
UNI CAP
NOZZLE ADAPTOR
• Universal nozzle cap suitable for use with the
majority of nozzles used in agriculture today
• Lower stock costs and easier managing
• Variety of colours available to suit your specific requirements
Suitable for the following nozzles:
• ARAG®
Kematal
• Lurmark® Flat Fan Tips
• Lechler Series 652, IDK
• Air Mix
• Lechler series ID, LU
• Teejet® Flat Fan Tips
Std. -01
-08
XR -01
-06
DG -015
-05
• Teejet® FL Fulljet
• Teejet® TG Fullcone
This compact and uniquely designed nozzle adaptor allows the
use of standard tips/caps, whilst allowing full functionality of
the nozzle body.
• Adaptor converts Hardi nozzle bodies to standard bayonet lugs
• Compact design adds only 1/2” length
• Tip strainers may be used between adaptor and nozzle body
• Gasket included
CODE
9950-0024
10 PACK
CODE
COLOUR
QTY
40299003
RED
LIST (EX GST)
$34.78
40299006
YELLOW
CAT
B
LIST (EX GST)
$2.17
CAT
B
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.101
Nozzle Accessories, Caps & Gasket
Born to Perform
CP19438-EPR (EPDM standard)
CP19438-VI (Viton optional)
TEEJET NOZZLE CAPS
The Quick Teejet® caps are designed with grooves that
fit locating lugs on the nozzle body. Caps are made of
nylon and are available for use with all Teejet spray tips.
Maximum operating pressure of 20 bar/290 psi
Quick
Teejet
Cap
*Specify colour code (see chart above).
Eg: CP25611-3-NY will supply red cap.
Seat Gasket
Nozzle Accessories, Caps & Gasket
Quick Teejet Cap & Standard Seat Gasket Kit
FOR USE WITH SPRAY TIPS
(REFERENCE GUIDE ONLY)
TeeJet
Flat Spray Tips
FOR USE WITH FLAT SPRAY
TIPS
BA MAXIMUM PRESSURE
300 PSI
TP
Standard
–0067 Thru –08
r Capacities)
DG TeeJet®
FOR USE WITH FLAT SPRAY TIPS COLOUR
BA MAXIMUM PRESSURE
300 PSI
CAPS
XR
–01 Thru –08
WITH FLAT SPRAY
TIPS
DG TeeJet® FOR USETT
Turbo TwinJet®
BA MAXIMUM PRESSURE
300 PSI
300 PSI
BA
MAXIMUM PRESSURE
Standard
XR
TeeJetTPFlat
Spray Tips (Smaller
OCCapacities)
TeeJet®
Turbo TwinJet®
–10 Thru
–20
AIXR TeeJet®
LIST
TEEJET GASKET
CAT
(EX GST)
& CAP KIT CODE
CP25611-1-NY
25612-1-NYR
CP25611-2-NY
25612-2-NYR
CP25611-3-NY
25612-3-NYR
(Smaller Capacities)
TeeJet Flat Spray Tips (Larger Capacities)
FOR USE WITH FLAT SPRAY TIPS
TT
TEEJET CAP
ONLY CODE
OC TeeJet®
CP25611-4-NY
AIXR TeeJet®
–01 Thru –08
CP25611-5-NY
$1.57
C
CP25611-6-NY
TwinJet®
TeeJet®
& AIUB
TeeJet®
SJ-3
StreamJet®
Tips canTJbe
positioned
inFlat
choice
of
two
plane
directions—
TeeJetAI
Spray
Tipsspray
(Larger
Capacities)
DG TwinJet®
25612-5-NYR
XR
DG
–10TeeJet®
Thru
r Capacities)
–15
TP Standard
XR
XR
parallel or perpendicular
to wings
Quick
TeeJet
cap.
–10ofThru
AI TeeJet® & AIUB
SJ-3
StreamJet®
DG TwinJet®
TPTeeJet®
Standard
XR
OC
TeeJet®
–10 ThruTJ TwinJet®–10 Thru
TT
Turbo
TwinJet®
AIXR–10
TeeJet®
–01 Thru –08
–20
–15
Thru
–10 Thru
–15
25610-1-NYR
$2.17
C
$2.17
C
$2.17
C
$2.17
C
Turbo TeeJet Induction®
CP25597-1-NY
TeeJet Flat Spray Tips (Smaller Capacities)
Provides shut-off at nozzle for quick spacing change or change
D-Disc
Core
in D-Disc
spray swathCore
-
C
25608-3-NYR
25608-4-NYR
C
C
26278-1-NYR
$3.09
C
C
19843-NYR
$3.91
C
Core
$0.87
C
CP19438-VI (Viton optional) Gasket only
$5.18
C
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
25600-6-NYR
25608-1-NYR
CP19438-EPR (EPDM standard) Gasket only
p.102
C
Turbo TeeJet
Induction®
CP25597-3-NY
ips (Smaller Capacities)
$1.57
TeeJet FlatTurbo
SprayFloodJet®
Tips (Smaller Capacities)
TK-VS FloodJet®
red
Capacities)
Locating
Turbo
FloodJet®
TP
in choice of two Standard
spray
plane
directions—
TeeJet
Flat
Spray
Tips
(Smaller
Capacities)
Turbo
FloodJet®
TK-VS
FloodJet®
OC TeeJet® Spray Tip
XR
Tips
can
be
positioned
in
choice
of
two
spray
plane
directions—
VisiFlo®
Spray
Tip
VisiFlo
Nib
Locating
DG
TeeJet®
TT
Turbo
TwinJet®
AIXR
TeeJet®
ecular
of two
spray
plane
directions—
–01
Thru
–08
–0067 Thru VisiFlo®
–08
–01 Thru
–08
Spray
of Quick
TeeJet
t® to wings
TX ConeJet®
TG
Full
Cone
Shank in
Tips can beHose
positioned
choice
of Tip
two sprayNib
plane directions— CP25599-6-NY
VisiFlo®
Spray
TipTip
Spray
parallel
orcap.
perpendicular
TeeJet
cap.
TeeJet
Flat Spray
Tips (Larger
Capacities)to wings of QuickVisiFlo
ngs of Quick TeeJet cap.
parallel
or perpendicular toCP18999-EPR
wings of Quick TeeJet cap.
TP Standard
XR
–10 Thru
–10 Thru
Used with DC-Core Inserts and
–20
®ller Capacities)
TK-VS
FloodJet® –15
(EPDM
Seal
Locating
Turbo FloodJet®
TK-VSstandard)
FloodJet®
TK-VS FloodJet®
CP4916
FlowCone
Regulators (Insert
Locating
Locating
VisiFloAISpray
Tip
TK
FloodJet®
FL FullJet®
TXSpray
ConeJet®
TGFloodJet®
Full
Hose Shank
Nib
oice of two spray
plane
directions—
CP25607-1-NY
Turbo
TK-VS
TJ TwinJet®
TeeJet®
&Tip
AIUB TeeJet®
SJ-3FloodJet®
StreamJet®
DG TwinJet®
Turbo
TeeJet
Induction®
VisiFlo®
Spray
VisiFlo
Tip
VisiFlo
Spray
Tip
Core
into Seal)
CP18999-VI TG Full Cone
Nib
TK FloodJet® Nib FL FullJet®
Hose Shank Locating
CoreSpray TipTX ConeJet®
wings of Quick
TeeJet
cap.
VisiFlo®
VisiFlo
Spray
Tip
Nib
(Viton® optional)
CP18999-EPR D-Disc
CoreDC-Core Inserts and
CP25607-3-NY
Used with
(EPDM standard)
CP4916 Flow Regulators (Insert
TK-VS
CP25607-4-NY
FL FullJet®CP18999-VI
TXFloodJet®
ConeJet®
TG
Full Cone
Hose Shank
TeeJet
Flat
Spray Tips
(Smaller
Capacities)
Locating
Core
into
Seal)
et®
TX ConeJet®
TG
Cone
Hose
Shank TX ConeJet®
Tips can
beFloodJet®
positioned
in choice
of two
plane
directions—
TK
FLspray
FullJet®
TG Full Cone
Hose Shank
Spray
TipFull
Nib
CP18999-EPR
(Viton®VisiFlo
optional)
parallelCeramic
or perpendicular
to
wings
of
Quick
TeeJet
cap.
Disc-Core TK FloodJet®
CP18999-EPR
FL FullJet®
TX ConeJet®
TG Full Inserts
Cone and Hose$1.57
Shank
Used with DC-Core
Used with DC-Core Inserts andCP25607-5-NY
(EPDM standard)
Seal
(EPDM standard)
CP4916 Flow
Regulators (Insert
Seal
Turbo FloodJet®
TK-VS FloodJet®
CP4916 Flow Regulators
(Insert
Locating
VisiFlo® Spray Tip
VisiFlo Spray Tip
CP18999-VI
Nib
Core into Seal)Core into Seal)
CP18999-VI
Core
Core
CP25607-6-NY
(Viton® optional)
CP18999-EPR
D-Disc
Core
(Viton®
optional)
lJet®
TX
ConeJet®
TG
Full
Cone
Hose
Shank
D-Disc
Core
Used
with
DC-Core
Inserts
and
Core
CP18999-EPR D-Disc
CP18999-EPR
(EPDM
standard)
Seal
Used
with DC-Core
Inserts
and TG Full Cone
TK
FloodJet®
FL
FullJet®
TX
ConeJet®
Hose
Shank
CP4916
Flow
Regulators
(Insert
Used with DC-Core Inserts and
(EPDM standard)
CP18999-EPR
CP4916 FlowCore
Regulators
(Insert
(EPDM standard)
SealSeal)
CP25607-8-NY
into
CP18999-VI
Used
with DC-Core Inserts and
CP4916
Flow Regulators
(Insert
Core
(EPDM
standard)
Core into Seal)
CP18999-VI
Seal
CP4916 Flow Regulators (Insert
(Viton®
optional)
Core into Seal)
CP18999-VI
Ceramic
Disc-Core
Ceramic
Disc-Core
Core
(Viton® optional)
Core into Seal)
CP18999-VI
CP18999-EPR
Used(Viton®
withCore
DC-Coreoptional)
Inserts and
D-Disc
Core
(EPDM standard)
Seal
CP18999-EPR
CP4916 Flow Regulators (Insert
(Viton®
optional)
D-Disc
Core
Used with DC-Core
andinto Seal)
CP18999-VIInsertsCore
CP26277-1-NY
$1.57
Core
(EPDM standard)
al
(Viton®
optional) (Insert
D-Disc
Core
CP4916 Flow
Regulators
D-Disc
Core
D-Disc
Core
Core into Seal)
CP18999-VI
Ceramic Disc-Core
(Viton® Ceramic
optional)
Disc-Core
Ceramic Disc-Core
D-Disc
$2.00
25612-7-NYR
25598-1-NYR
25598-3-NYR
CP25597-4-NY
25598-4-NYR
$1.57
C
–20
–15
25598-5-NYR
CP25597-5-NY
Turbo FloodJet®
TK-VS FloodJet®
eerofCapacities)
two spray plane directions—
Locating
TwinJet®
AI Tip
TeeJet®
& AIUB TeeJet®
SJ-3
StreamJet®
TurboCP25597-6-NY
TeeJet Induction®
TeeJet®
& AIUB
TeeJet®
StreamJet®
DG TwinJet®
Turbo TeeJet
Induction®
VisiFlo®
Spray
VisiFlo
Spray Tip DG TwinJet®
25598-6-NYR
gs
Quick
TeeJet
cap.TJ SJ-3
Nib
XR
IUBof
TeeJet®
SJ-3 StreamJet®
DG TwinJet®
Turbo
TeeJet
Induction®
TJ TwinJet®
AI TeeJet® & AIUB TeeJet® SJ-3 StreamJet®
DG
TwinJet® Turbo TeeJet Induction®
CP25597-7-NY
–10 Thru
TeeJet Flat Spray Tips (Smaller Capacities)
–15
Tips
can be
positioned
in choice of two spray plane directions—
Flat
Spray
Tips
(Smaller
Capacities)
TK-VSTeeJet
FloodJet®
FOR USE WITH FLAT SPRAY TIPS
Locating
BA MAXIMUM PRESSURE
300 PSI
parallel
orNib
perpendicular
to wings
Quick
TeeJet cap.
canTip
be
positioned
in choice
of two
spray of
plane
directions—
CP25599-3-NY
VisiFloTips
Spray
TK
FullJet®
TXcap.
ConeJet®
TG Full Cone
Hose Shank
& AIUB TeeJet® SJ-3
StreamJet®
DG TwinJet®
Turbo
TeeJet
Induction®
parallel
or FloodJet®
perpendicular
toFL
wings
of Quick
TeeJet
d
CAT
25612-6-NYR
–10
–01 Thru
Thru –08
CP25611-7-NY
FOR
–15 USE WITH FLAT SPRAY TIPS
BA MAXIMUM PRESSURE
300 PSI
FOR
USE WITH
FLAT
SPRAYTips
TIPS (Smaller Capacities)
TeeJet
Flat
Spray
FOR USE WITH FLAT SPRAY TIPS
Capacities)
FOR USE WITH
FLAT
SPRAY
TIPS
BA TP
MAXIMUM PRESSURE
300 PSI
BA MAXIMUM PRESSURECP25611-8-NY
300 PSI
BA MAXIMUM PRESSURE
300 PSI
OC TeeJet®
XR
XR
TJStandard
TwinJet®
& AIUB TeeJet®
DG TwinJet®
Turbo
TeeJet Induction®
DG TeeJet®SJ-3 StreamJet®
TT
Turbo
TwinJet®
AIXR TeeJet®
–0067
Thru –08 AI TeeJet®
–01 Thru –08
–10 Thru
CP25609-1-NY–01 Thru –08
TPTeeJet Flat Spray Tips (Smaller Capacities)
–15
ips (Smaller
Capacities)
OC TeeJet®
Standard
(Larger
Capacities)
TeeJet
Spray Tips
FlatDGSpray
(Smaller
Capacities)
FOR USE WITH
FLAT SPRAY
TIPSXRFlatTeeJet
TeeJet®Tips
TT
Turbo TwinJet®
AIXR TeeJet®
CP25609-2-NY
r Capacities)
–01
Thru –08
Thru –08
–01 Thru –08
BA –0067
MAXIMUM
PRESSURE
300 PSI
TP Standard
XR
$1.57
CP25609-4-NY
TeeJet Flat Spray
(Larger
Capacities)
C
TP
IUB TeeJet® SJ-3 StreamJet®
DG Tips
TwinJet®
Turbo
TeeJet
Induction®
–10 Thru
–10 Thru
OC TeeJet®
Standard
XR TP
–20–08
TP Standard
XR TeeJet® –15 OC TeeJet®
DG
TT
Turbo TwinJet®
AIXR TeeJet®CP25609-5-NY
–01
Thru
–08
–0067
Thru
–08
–01
Thru
OC
TeeJet®
DG TeeJet®
TT
Turbo
TwinJet®
AIXR
TeeJet®
Standard
XR
ller–08
Capacities)
–08
hru
–10
Thru
–10 OC
ThruTeeJet® –01 Thru
DG
TeeJet®
TT
Turbo TwinJet®
AIXR TeeJet®
DG TeeJet®
TT
Turbo
TwinJet®
AIXR
–01 Thru –08
–0067
ThruTeeJet®
–08
–01
–01Thru
Thru–08
–08
TeeJet
Flat
Spray
Tips
(Smaller
–15Capacities)
TeeJet
Flat–20
Spray
Tips
(Larger
Capacities)
CP25609-6-NY
ips (Larger Capacities)
Capacities)
25612-4-NYR
LIST
(EX GST)
Nozzle Holders & Accessories
SELECTA nozzle holders are the easiest and fastest means of mounting spray nozzles to booms.
Simply drill an appropriate size hole and clamp nozzle holder in place. The range available
includes non-drip valves, swivel nozzle holders, low pressure and high pressure holders and wet
and dry boom nozzle holders. All are UV light resistant, house most standard size nozzle tips
and feature self aligning quick fit caps for ease of nozzle cleaning. Applications include boom
spraying, poultry shed lines, car washes, livestock races and production line cooling. All nozzle
holders are supplied less tip. Merchandise packs of 2 or 4 where stated.
1/2” Spray tube= 22mm O.D.
3/4” Spray tube= 25.4mm O.D.
WET BOOM NOZZLE HOLDERS
Designed for clamping around 1/2” or 3/4” spray tubes. Feature a self-aligning nozzle cap and a mounting recess in the top clamp
for attachment to flat surfaces. Polypropylene construction. Includes nozzle cap, gasket and screw.
Self-aligning nozzle cap, twin
mounting screws. Includes
nozzle cap, gasket, screw and
nozzle body
Pictured: AR-210
pack of 4
DRAWING
0114
Pictured: AR-200
CODE
INLET
TUBE MAX PRESS.
SIZE (MM) SIZE KPA/PSI
LIST
(EX GST)
CAT
AR-100 (4 pack) 7
1/2”
1000/145
$49.57
C
AR-110 (4 pack) 10
3/4”
1000/145
$53.04
C
TEEJET NOZZLE HOLDERS
Features ChemSaver drip-free shut-off.
Requires 10 PSI (0.7 bar) at the nozzle
to open check valve.
Note: Excludes nozzle
cap and gasket.
AR NOZZLE HOLDERS
Single clamping screw on the half inch model.
Non-drip shut-off valve. Opens above 0.5 Bar. 1/2”
model features maximum 30 Bar pressure. Includes
nozzle cap, gasket, screw and nozzle body
TUBE
SIZE
MAX PRESS.
KPA/PSI
DRAWING
0116
CODE
INLET
SIZE (MM)
LIST
(EX GST)
AR-200 (4 pack)
7
1/2”
3000/435
$40.00
C
AR-210 (4 pack)
10
3/4”
2000/290
$64.35
C
CAT
CHEMSAVER ELECTRONIC NOZZLE BODY
CODE
INLET
SIZE(MM)
TUBE
SIZE
MAX PRESS.
KPA/PSI
LIST
(EX GST)
CAT
QJ17560A-1/2x7-NYB
7
1/2”
2068/300
$7.04
C
QJ17560A-1/2-NYB
9.5
1/2”
2068/300
$7.30
C
QJ17560A-3/4-NYB
9.5
3/4”
2068/300
$7.39
C
QJ17560A-1-NYB
9.5
1”
2068/300
$7.39
C
TEEJET MULTIPLE
NOZZLE HOLDERS
This 3 position nozzle holder features a
positive shut-off between each position
and includes ChemSaver® diaphragm
check valve for drip-free shut-off.
Note: Excludes nozzle cap and gasket.
The Teejet Chemsaver electronic nozzle body uses a small solenoid
to allow for control over a single nozzle. Typical application is to
fit the end of the boom, where it can be turned on and off when
needed from the tractor or vehicle cabin within ¼ of a second.
Its ideal application is for spraying under fence lines, plantations
or wind breaks where typical spray booms cannont reach. The
Chemsaver requires a 12 volt power supply, which can be found on
most vehicles.
• Teejet electric solenoid shut-off valve
• Valve is normally closed for safety
• Electric charge energises the
coil to open the valve
• Removal of the charge allows the
spring to close the valve
• Coil is rated at 12V, 7 watts
• Maximum current draw of 0.75 amps
• Valve response time of 0.25 seconds
• All wettable parts are stainless steel or Viton
• Pressure drop of 5psi (0.34 bar) at 2.27L/min
• Pressure drop of 10psi (0.7 bar) at 3L/min
• Maximum 100psi (6.8 BAR) spraying pressure at min voltage 12 volts
CODE
INLET
SIZE (MM)
TUBE
SIZE
MAX PRESS.
KPA/PSI
LIST
(EX GST)
CAT
QJ363C-1/2-NYB
9.5
1/2”
2068/300
$23.48
C
QJ363C-3/4-NYB
9.5
3/4”
2068/300
$26.36
C
CODE
QJ363C-1-NYB
9.5
1”
2068/300
$26.36
C
ECS17560A-1/2X7-NYB Chemsaver Electronic Nozzle Body
DESCRIPTION
LIST (EX GST) CAT
$80.00
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
C
p.103
Nozzle Holders & Accessories
STANDARD NOZZLE
HOLDERS
Born to Perform
Nozzle Holders & Accessories
DRY BOOM NOZZLE HOLDERS
Designed for mounting directly to boom frame for variable nozzle spacings when used with hose
and clamps. Fits round or square tubing or pipe and is connected by hose and clamps. Polypropylene
construction with max pressure of 2000kPa (290psi). Complete range of mounting clamps
available - see page 91.
1
8235 SERIES
Self aligning nozzle cap. Available in single or double hosetails. Non-drip shut-off valve
standard (open 0.5 Bar).
CODE
Nozzle Holders & Accessories
2
REF
NOZZLE HOLDER TYPE
INLET HOSE TAIL SIZE I.D.
MAX PRESS. KPA/PSI
LIST (EX GST)
CAT
G8235019
1
SINGLE
3/8”
2000/290
$9.57
B
G8235021
1
SINGLE
1/2”
2000/290
$9.57
B
G8235025
2
DOUBLE
3/8”
2000/290
$9.57
B
G8235027
2
DOUBLE
1/2”
2000/290
$15.65
B
QJ200 SERIES
• Drip free shut-off with ChemSaver®
• Opening pressure - 10 psi (0.7 bar)
• Available in single, double or triple hose shanks
• Hose barb sizes for 3/8”, 1/2” or 3/4” I.D. hose
• Use with Quick Teejet caps (page 87)
A
B
C
CODE
REF
NOZZLE HOLDER TYPE
INLET HOSE TAIL SIZE I.D.
MAX PRESS. KPA/PSI
LIST (EX GST)
CAT
19349-211-406-NYB
A
SINGLE
3/8”
862/125
$15.65
B
19349-211-540-NYB
A
SINGLE
1/2”
862/125
$15.65
B
19349-211-785-NYB
A
SINGLE
3/4”
862/125
$15.65
B
19350-212-406-NYB
B
DOUBLE
3/8”
862/125
$15.65
B
19350-212-540-NYB
B
DOUBLE
1/2”
862/125
$15.65
B
19350-212-785-NYB
B
DOUBLE
3/4”
862/125
$15.65
B
19351-213-406-NYB
C
TRIPLE
3/8”
862/125
$15.65
B
19351-213-540-NYB
C
TRIPLE
1/2”
862/125
$15.65
B
19351-213-785-NYB
C
TRIPLE
3/4”
862/125
$15.65
B
QJ39685 SERIES
• Teejet ChemSaver® drip-free shutoff
• Made of corrosion-resistant materials
G8235 SERIES
• Geoline compact non-drip elbow
• Made of corrosion-resistant materials
CODE
QJ39685-1L-500-NYB*
QJ39685-1R-500-NYB*
QJ39685-2-500-NYB*
G8235035
G8235031
G8235033
CP21953-EPR
1
REF
NOZZLE HOLDER TYPE
1
SINGLE LEFT
2
SINGLE RIGHT
3
DOUBLE
4
SINGLE LEFT
5
SINGLE RIGHT
6
DOUBLE
Replacement standard diaphragm
2
3
INLET HOSE TAIL SIZE I.D.
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
* Teejet
p.104
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
4
MAX PRESS. KPA/PSI
2000/290
2000/290
2000/290
2000/290
2000/290
2000/290
5
LIST (EX GST)
$11.30
$11.30
$11.30
$12.17
$12.17
$12.17
$0.78
6
CAT
B
B
B
B
B
B
B
Nozzle Holders & Accessories
NOZZLE ADAPTORS
1
Use with 4132 series
• Features ChemSaver® no-drip shutoff.
Requires 10 PSI (0.7 bar) at the nozzle to open check valve
• QJ8360-NYB allows use of Quick TeeJet system
from 1/4” NPT female connections
• QJT8360-NYB permits use of Quick TeeJet system with
standard 11/16” TeeJet thread
2
CODE
REF
THREAD SIZE
ANTI DRIP VALVE
MAX PRESS.KPA/PSI
LIST (EX GST)
CAT
QJ8360-NYB
1
1/4” NPT (M)
YES
2000/290
$12.17
B
QJT8360-NYB
2
11/16” TEEJET THREAD (F)
YES
2000/290
$13.04
B
Fits standard Quick TeeJet bodies for easy use. Nylon
construction for strength and durability. Outlets can be
fitted with Quick TeeJet caps and TeeJet Spray Tips. 90°
angle between outlets allows for improved coverage and
crop penetration when fitted with flat spray tips. Maximum
pressure: 2000kPa/290psi
CODE
MAX PRESS.KPA/PSI
LIST (EX GST)
CAT
QJ90-2-NYR
2000/290
$6.78
B
VARI SPACING CLAMPS
These clamps are for use on all dry boom nozzle bodies
1
2
CODE
REF
TO FIT
LIST (EX GST)
CAT
QJ111-1/2
1
1/2” Pipe (13/16” & 7/8” O.D. Tubing)
$4.96
B
QJ111-3/4
1
3/4” Pipe (1” & 11/16” O.D. Tubing)
$4.96
B
(11/8”, 11/4”
&
13/8”
QJ111-1
1
1” Pipe
O.D. Tubing)
$4.96
B
QJ111-1-1/4
1
11/4” Pipe (19/16” & 111/16” O.D. Tubing)
$4.96
B
QJ111SQ-3/4
2
3/4” Square Tubing
$4.96
B
QJ111SQ-1
2
1” Square Tubing
$4.96
B
QJ111SQ-1-1/4
2
11/4”
Square Tubing
$4.96
B
QJ111SQ-1-1/2
2
11/2” Square Tubing
$4.96
B
HOSE DROPPER
Self aligning cap, fits all Selecta nozzle holders. Available in 15” and 24” lengths.
Ideal for fitting swivel nozzles in row crop application
CODE
PACK OF 2
NOZZLE HOLDER
TYPE
INLET SIZE
(MM) (BSP)
OUTLET SIZE
MAX PRESSURE
KPA/PSI
LENGTH
(MM)
LIST
(INC GST)
CAT
AR-600
Hose Dropper
CAP
1/4” NPT
1000/145
380
$38.26
B
AR-610
Hose Dropper
CAP
1/4” NPT
1000/145
610
$37.39
B
NOZZLE MANIFOLD
1/2” wet boom nozzle holders clamp
around to allow hose connection.
Ideal for use where spray tubes are
not required.
1
CODE
REF
G8294023
1
NOZZLE
HOLDER
TYPE
SINGLE
G8294024
2
TWIN
2
INLET SIZE
(MM) (BSP)
OUTLET
MAX PRESSURE
KPA/PSI
LENGTH
(MM)
LIST
(EX GST)
CAT
12
7.5mm
1000/145
60
$1.57
B
12
7.5mm
1000/145
90
$1.48
B
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.105
Nozzle Holders & Accessories
NOZZLE ADAPTORS
Born to Perform
Nozzle Holders & Accessories
SWIVEL NOZZLE HOLDERS
Features an adjustable spray angle with lock nut to hold body in place.
Self aligning nozzle cap. Ideal for use in row crop application.
• 2 swivel nozzle holders per packet
1
2
CODE
REF
NOZZLE HOLDER TYPE
INLET SIZE (BSP)
MAX PRESSURE KPA/PSI
LENGTH (MM)
LIST (EX GST)
CAT
404072
1
Single outlet
1/4” F
1000/145
70
$11.82
C
G8247014
2
Double outlet
1/4” F
1000/145
70
$10.43
C
BRA - SWIVEL NOZZLE HOLDERS
Nozzle Holders & Accessories
1
Brass plated adjustable angle swivel bodies with moulded plastic outlets which
reduce weight. Threaded nozzle caps for high pressure application and row crop
spraying. Single or twin outlets.
2
CODE
REF
NOZZLE HOLDER TYPE
INLET SIZE
(BSP)
MAX PRESSURE
KPA/PSI
LENGTH
(MM)
LIST
(EX GST)
CAT
G8247004
1
SINGLE
1/4” F
2068/300
70
$13.04
C
G8247008
2
DOUBLE
1/4” F
2068/300
70
$18.26
C
BR-100 (2 pack)
1
SINGLE
1/4” F
2068/300
70
$36.52
C
BR-200 (2 pack)
2
DOUBLE
1/4” F
2068/300
70
$50.43
C
TEEJET SWIVEL
NOZZLE HOLDERS
Teejet swivel nozzle bodies are
primarily for use with tips employed
in row crop spraying. A locknut holds
swivel bodies firmly in position at
a selected spray projection angle
so they are not affected by jarring
and vibration. For use at pressures
up to 125 PSI (8.6 bar). These are
also available in the QJ8600 swivel
Quick TeeJet nozzle body assemblies
which provide the same spray tip
adjustability of a standard TeeJet
threaded swivel plus the quick change
and self-aligning features of the Quick
TeeJet System.
Pictured:
CP1325
Pictured:
CP8027-NYB
p.106
A
B
C
D
E
F
G
H
CODE
REF
INLET SIZE
(BSP)
MATERIAL
SWIVEL ARC
RANGE
MAX PRESS.
KPA/PSI
LIST
(EX GST)
CAT
QJ8600-2-1/4-NYB
QJ8600-1/4-NYB
5000-1/4T
5540-1/4TT
4202-2-1/4T
6240-1/4TT
8600-1/4T-NYB
8600-2-1/4T-NYB
A
B
C
D
E
F
G
H
1/4” NPT (F)
1/4” NPT (F)
1/4” NPT (F)
1/4” NPT (M)
1/4” NPT (F)
1/4” NPT (M)
1/4” NPT (F)
1/4” NPT (F)
Nylon
Nylon
Brass
Brass
Brass
Brass
Nylon
Nylon
280°
280°
280°
280°
280°
280°
280°
280°
862/125
862/125
862/125
862/125
862/125
862/125
862/125
862/125
$14.78
$12.17
$33.91
$30.43
$35.65
$35.65
$14.78
$15.65
C
C
C
C
C
C
C
C
TEEJET NOZZLE CAPS
Secure interchangeable TeeJet tips to the various nozzle bodies. CP18032A-NYB
winged TeeJet cap allows quick change of spray tips with no tool required.
TEEJET BODY NUMBER MATERIAL
REF
LIST (EX GST)
CAT
CP1325
Brass
$2.52
C
CP8027-NYB
Nylon
$1.65
C
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Nozzle Holders & Accessories
WET BOOM NOZZLE HOLDERS
Selecta high pressure nozzle holders are ideal for orchard, vineyard, market garden and
poultry shed applications. They can be retro-fitted to existing equipment or for specialised
manufacturing uses, eg. special spray booms. Brass construction with BSP connections. Most
models supplied standard with nozzle caps. Maximum pressure 5000KPA (725psi).
CODE
SINGLE ITEM
REF
NOZZLE CAP
SUPPLIED
CONSTRUCTION
INLET SIZE
(BSP)
TUBE
SIZE
OUTLET SIZE
(BSP)
MAX PRESSURE
KPA/PSI
LIST
(EX GST)
CAT
004215
2
NO
BRASS
7mm
1/2”
1/4” Female
5000/725
$8.70
C
HIGH PRESSURE NOZZLE HOLDERS
3
2
5
4
DRAWING
DRAWING
DRAWING
DRAWING
DRAWING
0120
0121
0122
0642
0181
6
(1) SINGLE SERIES
(4) VINE SERIES
Flip over nozzle fitted with 1/4” BSP thread, all brass
construction, ceramic tip, stainless steel swirl plate, 90º
shut off.
Features adjustable spray pattern simply by twisting rear adjusting
nut. Supplied with 1/4” BSP swivel which allows the nozzle to be
locked in almost any spray angle/position. Brass construction with
ceramic nozzle tip.
(2) 68 SERIES
(5) MA7 SERIES
Same features as A, double sided.
Ideal for use in high volume pressure applications in heavy
foliage eg. spraying citrus. Features adjustable spray pattern,
tungsten carbide nozzle with sizes from 1.5mm to 4mm and brass
construction. Supplied with 1/4” BSP swivel.
(3) BRA SERIES
Brass flip over nozzle fitted with anti-drip valve
with viton diaphragm. Anti-drip valve opens at 1 Bar
pressure. 1/4” BSP thread, all brass construction,
ceramic tips, stainless steel swirl plates, 90º shut off.
(6) MA3 SERIES
Double brass nozzle holder designed to increase number of nozzles
thus reducing the droplet size and increasing the coverage. Fits
directly to most brass nozzle holders (1), (2) and (3) to replace
existing nozzle & cap i.e. 1 jet nozzle holder becomes 2 jet.
CODE
QTY
REF
INLET
SIZE (STD)
NOZZLE SIZE ANTI DRIP
(STD)
VALVE
MAX
PRESSURE
KPA/PSI
L
(MM)
W
(MM)
H
(MM)
LIST
(EX GST)
CAT
G8264000A
1
1
1/4” Male
1.2
NO
5000/725
50
30
60
$43.48
C
MA3-68
1
2
1/4” Male
1.2/1.5
NO
5000/725
70
30
60
$45.22
C
MA3-66
1
3
1/4” Male
1.2/1.5
YES
5000/725
80
30
40
$47.83
C
MA3-66-PK
2 Pack
3
1/4” Male
1.2/1.5
YES
5000/725
-
-
-
$92.17
C
P50
1
4
1/4” Male
1.2
NO
5000/725
100
25
70
$45.22
C
G8275016
1
5
1/4” Male
1.5
NO
5000/725
130
30
30
$32.17
C
MA3-78
1
6
3/4” Female
-
-
5000/725
30
125
50
$58.53
C
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.107
Nozzle Holders & Accessories
1
Born to Perform
Pressure Gauges
Ideal where exact measurements. Both standard and dual pressure
gauges for high and low pressure readings. Feature a nominal size
63mm guage, clear lens, glycerine filled, 1/4” BSP male thread in
either bottom or back entry models.
CODE
ENTRY TYPE
PRESSURE LIMITS
C99-217*
C99-247*
C99-248-PK†
C99-249-PK†
C99-205/30B
C99-204
G8302058
C99-207
C99-210/50B
Back
Back
Bottom
Back
Bottom
Back
Bottom
Back
Bottom
0-6 BAR
0-60 BAR
0/5/25 BAR
0/5/25 BAR
0-60 BAR
0-60 BAR
0-80 BAR
0-80 BAR
0-100 BAR
* 100 mm face gauge model with 1/2 BSP connection
1 BAR = 14.5 PSI
OPTIMUM
OPERATING
PRESSURE
3 BAR
60 BAR
1-5 BAR
1-5 BAR
30 BAR
30 BAR
40 BAR
40 BAR
50 BAR
LIST
(EX GST)
CAT
$172.17
$99.13
$60.00
$63.48
$47.83
$47.83
$47.83
$47.83
$47.83
C
C
C
C
C
C
C
C
C
† Dual Stage gauge model
Pressure Gauges
GRADUATED OR
PROGRESSIVE FILTRATION
Filtration is ideally applied in stages,
starting with a coarse mesh progressing to
finer mesh sizes as liquid moves towards
the spray tip. Filter mesh is normally
described in terms of the number of wires
per linear inch, which relates to the size of
the apertures through which liquid passes.
The larger the mesh number the smaller
the aperture and the finer the filtration.
COARSE FILTRATION
20 Mesh/inch
0.6mm Aperture
Filtration
Efficient filtration is an important component of every sprayer. Effective filtration will
prevent blocked nozzles, reduce or inhibit pump wear and help reduce down time and
expense due to repairs. Selecta offers a choice of foot, suction, pressure line, nozzle
and high volume irrigation filters to suit most applications.
STAGE A - INTO THE TANK
COARSE FILTRATION
Liquid passing into the tank is filtered by the
foot/floating filter or the lid basket strainer.
FLOTATION FILTER
BASKET FILTER
30 Mesh/inch
0.4mm Aperture
MEDIUM FILTRATION
50 Mesh/inch
0.3mm Aperture
80 Mesh/inch
0.18mm Aperture
STAGE B - FROM TANK TO PUMP
COARSE/MEDIUM FILTRATION
Suction filters provide protection for
the pump and screen out larger particles.
SUCTION FILTER
STAGE C - FROM PUMP TO SPRAYLINES
1
MEDIUM/FINE FILTRATION
Pressure line filters are used to remove
finer particles before nozzle holders.
1. Large pressure line /flushing filter is ideally fitted between pump
and pressure regulator.
2. Small pressure line filters are usually fitted
in each boom section spray line.
STAGE D - SPRAY TIP FILTERS
FINE FILTRATION
100 Mesh/inch
0.14mm Aperture
p.108
FINE FILTRATION
Last stage of filtration before the spray tip,
usually 50 mesh or finer.
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
NOZZLE FILTER
2
Stage A & B Filtration
BASKET FILTERS
Basket filters provide the first or preliminary stage of filtration, a coarse mesh
prevents large particles of debris from passing into the liquid storage tank. All
basket filters feature 20 mesh elements.
Pictured: G8159000
AGRICULTURAL SPRAY PRODUCTS
CODE
SIZE
(MM)
MESH
SIZE
DIAMETER (MM)
INSIDE
OUTSIDE
G8147002
255
20
188
G8153001
355
20
286
G8159000
455
20
378
HEIGHT
(MM)
LIST
(EX GST)
CAT
200
240
$30.43
C
300
240
$34.78
C
398
180
$29.57
C
FLOATING SUCTION FILTER
This filter is designed to float a few centimetres beneath the water surface,
thus preventing any obstruction due to the mud lying on the bottom or
debris floating on the surface.
CODE
PORT SIZE
SIZE (MM)
LIST (EX GST)
CAT
1 1/2”
40
$129.57
C
G8062003B
2”
50
$138.26
C
SUCTION LINE FILTERS
1
2
3
DRAWING
DRAWING
DRAWING
0695
0695
0695
4
Suction line filters provide filtration to remove
larger particles of grit and are ideally mounted
between the tank and pump. Feature 8 mm
threaded brass inserts and mounting bolts for
easy adaption to frames and chassis etc. Screw
off bowl for easy cleaning.
SAR2/V and SAR3/V models feature an auto
shut-off action valve which closes off the supply
line while removing element for cleaning. 50
mesh element is supplied standard. 16, 32 and
100 mesh elements are also available to suit
most filters - please specify
when ordering.
5
6
DRAWING
DRAWING
DRAWING
0695
0697
0697
AGRICULTURAL SPRAY PRODUCTS
CODE
REF
FILTER
TYPE
MESH
SIZE
SHUT OFF
VALVE
FLOW
L/MIN
PORT SIZE
BSP
MOUNT.
INSERTS
WIDTH
(MM)
HEIGHT
(MM)
LIST
(EX GST)
CAT
LSA-310058
1
SAR0
40
NO
UP TO 60
1 1/4”
2
107
163
$42.61
C
LSA-312158
2
SAR1
40
NO
UP TO 100
1 1/4”
2
107
213
$47.83
C
LSA-314163
3
SAR2
50
NO
UP TO 160
1 1/2”
3
122
233
$81.74
C
LSA-316063
4
SAR3
50
NO
UP TO 250
1 1/2”
3
170
292
$96.52
C
LSA-316173
4
SAR3
50
NO
UP TO 250
2”
3
170
292
$106.09
C
LSA-314463
5
SAR2/V
50
YES
UP TO 160
1 1/2”
3
140
260
$99.13
C
LSA-314563
5
SAR2/V
50
YES
UP TO 160
1 1/2”
3
122
278
$99.13
C
LSA-316573
6
SAR3/V
50
YES
UP TO 220
2”
3
170
329
$111.30
C
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.109
Stage A & B Filtration
G8062003A
Born to Perform
Stage-B Filtration
MESH ELEMENTSSUCTION LINE FILTERS
Efficient filtration is an important
component of every sprayer. Effective
filtration through the use of the correct
suction filter/element will screen
out any larger particles and provide
protection for the pump.
3
2
1
CODE
REF
FILTER TYPE
MESH SIZE
COLOUR
WIDTH (MM)
HEIGHT (MM)
LIST (EX GST)
CAT
GC00100021
1
SAR1
50
BLUE
70
150
$33.91
C
GC00100012
2
SAR2/SAR2/V
50
BLUE
80
165
$28.70
C
GC00100008
3
SAR3/SAR3/V
32
WHITE
107
200
$40.87
C
GC00100009
3
SAR3/SAR3/V
50
BLUE
107
200
$40.87
C
1
2
Stage C Filtration
Stage-B Filtration
PRESSURE LINE STRAINERS
Pressure line strainers are ideal for placing in hose lines
between pump and spray lines for finer filtration. They remove
fine particles preventing spray tip blockage or excessive wear.
Polypropylene or brass construction, mesh element standard,
twist-off bowl for easy cleaning. Some models feature a
clean flushing tap. Pressures range from 1000KPA (145psi) to
5000KPA(725psi) maximum, flow from 70 to 200 L/Min.
3
4
DRAWING
DRAWING
DRAWING
DRAWING
0747-0770
0076
0077
5083
CODE
REF MAX PRES.KPA/PSI
FLOWL/MIN
PORT SIZE BSP
MOUNT. INSERTS
WIDTH (MM)
HEIGHT (MM)
MATERIAL
LIST (EX GST)
CAT
BRA-M147
1
5000/725
70L Max
1/2” Female
-
90
155
BRASS
$89.57
C
PLF-324024A
2
1000/145
160L Max
1/2” Female
2
97
134
POLY
$40.87
C
PLF-324034A
2
1000/145
160L Max
3/4” Female
2
97
134
POLY
$42.61
C
PLF-3262054
3
1000/145
200L Max
1 1/4” Male
2
141
239
POLY
$92.17
C
G8135002
4
5000/725
150L Max
1/2” Female
4
100
240
POLY
$61.74
C
MESH ELEMENTS PRESSURE LINE STRAINERS
“O” ring
not included
1
CODE
BRA-14620370
GC00100001
GC00100003
GC00100033
GC00100035
GC00100005
GC00100007
GC00100015
GC00100016
p.110
REF
1
2
2
3
3
4
4
5
5
FILTER TYPE
BRA
324
324
326
326
3244
3244
G8135
G8135
MESH SIZE
70
50
100
50
100
50
100
50
82
2
COLOUR
S/STEEL
BLUE
RED
BLUE
RED
BLUE
RED
BLUE
GREY
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
3
WIDTH (MM)
40
40
40
58
58
38
38
50
50
“O” ring
not included
4
HEIGHT (MM)
65
90
90
210
210
125
125
150
150
5
LIST (EX GST)
$45.22
$26.96
$26.96
$33.04
$33.04
$26.96
$20.87
$17.39
$27.83
CAT
C
C
C
C
C
C
C
C
C
Stage B & C Filtration
IN-LINE TEEJET SUCTION PRESSURE
FILTER 122 SERIES
Mountable design, 1/2” or 3/4” female BSPT nylon construction with stainless steel
screen. Ideal for spot sprayers or small booms. Maximum pressure 10 BAR. This filter
assembly is fully mountable with female brass threads moulded into its housing.
80#
CODE
100#
DESCRIPTION
MESH SIZE
MESH COLOUR
FLOW L/MIN
THREAD
LIST (EX GST)
CAT
AAB122ML-1/2-PP-50
Filter Assembly
50
Red
45
1/2”
$30.43
C
AAB122ML-3/4-PP-50
Filter Assembly
50
Red
60
3/4”
$30.43
C
AAB122ML-1/2-PP-80
Filter Assembly
80
Blue
45
1/2”
$30.43
C
AAB122ML-3/4-PP-80
Filter Assembly
80
Blue
60
3/4”
$30.43
C
AAB122ML-1/2-PP-100
Filter Assembly
100
Green
45
1/2”
$30.43
C
AAB122ML-3/4-PP-100
Filter Assembly
100
Green
60
3/4”
$30.43
C
CP45102-3-SSPP
Screen
50
Red
$9.57
C
CP45102-4-SSPP
Screen
80
Blue
$9.57
C
CP45102-5-SSPP
Screen
100
Green
$9.57
C
CP23173-VI
Housing O-ring (viton)
-
-
$14.78
C
-
-
3/4” or 1” BSPT nylon construction, 87 L/min. flow rated for 3/4” and 129 L/min.
for 1”. Maximum pressure ratings 10 BAR/145psi. Available with 16, 30, 50, 80,
100 or 200 stainless steel mesh filters.
CODE
DESCRIPTION
AAB126ML-3
AAB126ML-4
CP16903-4-SSPP
CP16903-5-SSPP
CP16903-6-SSPP
CP16903-7-SSPP
Housing Only
Housing Only
Screen
Screen
Screen
Screen
Housing
O-ring (EPDM)
CP50494-EPR
50#
100#
80#
200#
MESH
SIZE
50
80
100
200
MESH
COLOUR
Red
Blue
Green
Orange
FLOW
L/MIN
87
132
-
-
-
-
3/4”
1”
-
LIST
(EX GST)
$22.61
$22.61
$26.09
$26.09
$26.09
$26.09
C
C
C
C
C
C
-
$3.91
C
THREAD
CAT
IN-LINE TEEJET SUCTION
PRESSURE FILTER 126ML SERIES
14 BAR/203psi pressure rating at 38ºC 1 1/2” BSPT
female inlet/outlets, polypropylene construction, high
strength 1” bypass line on bowl. Available with 50, 80,
100 or 120 stainless steel mesh.
50#
80#
100#
120#
CODE
DESCRIPTION
MESH SIZE
MESH COLOUR
FLOW L/MIN
THREAD
LIST (EX GST)
CAT
AAB126ML-6-30
Filter assembly
30
Yellow
291
1 1/2”
$78.26
C
AAB126ML-6-80
Filter assembly
80
Blue
291
1 1/2”
$65.22
C
CP15941-2-SSPP
Screen
30
Yellow
-
-
$26.09
C
CP15941-3-SSPP
Screen
50
Red
-
-
$26.09
C
CP15941-4-SSPP
Screen
80
Blue
-
-
$26.09
C
CP48656-EPDM
Housing O-ring (EPDM)
-
-
-
-
$7.57
C
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.111
Stage C Filtration
IN-LINE TEEJET SUCTION PRESSURE
FILTER 126ML SERIES
Born to Perform
Stage D Filtration
Nozzle or tip filters provide the final stage of filtration before the liquid is sprayed. They are available as standard or small cup type
filters and fit most nozzle holders. Also available in anti-drip versions.
CUP STRAINERS
Stainless steel construction.
Choice of 50 and 100 mesh screens.
* Specify mesh size Eg. 50 Mesh PKT-4067-SS-50
CODE (10 PACK)
MESH SIZE
MESH SCREEN MATERIAL
TYPE
STRAINER BODY & CAP MATERIAL
LIST (EX GST)
CAT
PKT-4067-SS-*
50/100
Stainless Steel
CUP
Stainless Steel
$31.30
C
Tip Strainers
1
TIP STRAINERS
2
Tip strainers protect the spray tip orifice from clogging
and damage. Stainless steel screens available in 50
mesh. 100 mesh also available individually.
Codes 5053-100-SS and 5053-100-PP
Stage D Filtration
CODE
5053-50-SS
8079-PP-50
REF
1
2
MESH SIZE
50
50
MESH SCREEN MATERIAL
Stainless Steel
Stainless Steel
TYPE
Standard
Standard
STRAINER BODY & CAP MATERIAL
Brass
Polypropylene
LIST (EX GST)
$5.30
$26.09
CAT
C
C
TIP STRAINER WITH CHECK VALVE
Ideal for knapsacks and 12 volt sprayers by eliminating any
excess drips. Fits all Silvan nozzle bodies. Ball check opens
at 5psi (0.34 bar) Recommended for flow rates up to 3 L/min.
Available in 50 and 100 mesh screens. Note: Use of these ball
check valves results in a pressure drop of 5psi (0.34 bar)
Note: Cut away picture shown for illustrative purposes only
CODE
MESH
SIZE
MESH SCREEN
MATERIAL
TYPE
STRAINER BODY
& CAP MATERIAL
CHECK VALVE FLOW
RATE/OPENS AT
LIST
(EX GST)
CAT
4193A-PP-10-100SS
100
Stainless Steel
Standard with check Valve
Polypropylene
3L/min. /0.34 BAR
$6.26
C
4193A-PP-10-50SS
50
Stainless Steel
Standard with check Valve
Polypropylene
3L/min. /0.34 BAR
$6.26
C
Valves & Agitators
Selecta offers a wide range of valves for all types of applications. All are manufactured to
high specifications with excellent resistance to agricultural chemicals with minimum flow
restriction or pressure loss. They feature BSP connections and quick turn on/off. Ideal for
controlling boom lines, change of liquid directional flow, stop cocks or tank outlets.
BUTTERFLY VALVE - HIGH PRESSURE
Teflon seals, durable chrome coating, 90˚ on/off with female BSP connections. * 1/2”
also available in 2 pack, part number 472-28B-PK
CODE
SIZE FEM BSPT
PRESSURE KPA/PSI
LENGTH (MM)
WIDTH (MM)
HEIGHT (MM)
LIST (EX GST)
CAT
472-22B
1/4”
5000/725
52
25
55
$30.43
C
472-28B*
1/2”
5000/725
52
32
60
$34.78
C
IN LINE TAP
Ideal for low pressure applications
p.112
CODE
SUIT I.D.
HOSETAIL
PRESSURE
KPA/PSI
LENGTH
(MM)
WIDTH
(MM)
HEIGHT
(MM)
LIST
(EX GST)
CAT
320-TAP1
1/2”
689/100
74
28
49
$4.96
C
320-TAP2
3/8”
689/100
82
27
39
$9.57
C
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Tank Lids & Strainers
Silvan “Smooth-Line” lid assemblies are used extensively throughout Australia by fibreglass, plastic and other manufacturers.
A wide range of sizes is available to suit many applications, eg. manholes in water storage tanks and grain silos, inspection
hatches in boats etc. and in most agricultural and water cartage tanks. Combining neat appearance, long life, low cost and ease of
installation, these lids are ideally suited to industry or the everyday handyman.
Manufactured from high quality chemical resistant UV stabilised polypropylene, the “Smooth-Line” design allows for liquid run off.
Larger screw type lids feature twist on/off centre cap, incorporating a double breather valve (single on smaller lids) for fast tank
filling and quick emptying. Two start threads for secure, positive fastening
and sealing to eliminate spillage during transportation. Deep nylon
mesh strainers for fast filling are available to suit most lid assemblies.
LIDS - MALE THREAD TYPE
Twin threaded lid with breather valve.
SIZE (MM)
INSIDE
OUTSIDE
G8146002
255
210
250
G8152002
355
313
355
G8158002
455
408
450
DIAMETER (MM)
HEIGHT (MM)
G8170015 455
INSIDE
OUTSIDE
415
457
31
$31.30
C
29
$34.78
C
23
$43.48
C
HEIGHT
(MM)
LIST (EX
GST)
CAT
CODE
SIZE
(MM)
22.5
$88.70
C
G8178001
170
DIAMETER (MM)
INSIDE
OUTSIDE
150
170
HEIGHT
(MM)
LIST
(EX GST)
CAT
56
$16.52
C
BREATHER VALVES
1. Single breather valve with locking nut.
2. Double sprung breather valve suit Arag lids
3. Labyrinth valve suit Geoline lids
CODE
REF
1
TYPE
2
DIAMETER (MM)
INSIDE
HEIGHT (MM)
3
LIST (EX GST)
CAT
OUTSIDE
G8208000
1
Single
35
55
80
$12.17
C
3522000
2
Dual
110
140
80
$21.74
C
G8140002
3
Dual
110
140
75
$14.78
C
LID RINGS
Two start threads for secure, positive fastening and sealing.
CODE
SIZE A
DIAMETER (MM)
B
C
HEIGHT (MM)
LIST (EX GST)
CAT
G8148000
255
218
192
38
$11.30
C
G8154000
355
320
290
38
$15.65
C
G8160000
455
415
382
35
$19.13
C
LID STRAINERS
For prevention of large particles or debris entering tank.
CODE
SIZE (MM)
MESH SIZE
DIAMETER (MM)
INSIDE
OUTSIDE
HEIGHT (MM)
LIST (EX GST)
CAT
G8147002
255
20
188
200
240
$30.43
C
G8153001
355
20
286
300
254
$34.78
C
G8159000
455
20
378
398
160
$29.57
C
Pictured: G8159000
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.113
Tank Lids & Strainers
DIAMETER (MM)
CAT
Twin thread lid with spring loaded air valve
ideal for moulded tank neck
Twin threaded lid with sealing gasket,
breather valve and threaded ring.
SIZE
(MM)
LIST (EX GST)
LID - FEMALE THREAD TYPE
LID - HINGE TYPE
CODE
Pictured: G8158002
Pictured: G8146002
CODE
Born to Perform
Tank & Hose Fittings
Maintaining a leak free and smooth liquid flow by using quality components and fittings is essential for maximum performance from
all installations. Selecta’s range of fittings are manufactured from high quality polypropylene and are compatible with fungicides,
herbicides, chemical fertilisers etc, and will withstand temperatures of up to 100ºC. Standard BSP male and female threads can be
used in conjunction with each other to construct assorted types and sizes of inlets, outlets, suction fittings, hose unions etc. or they
can be used with standard brass, galvanised and various other fittings.
HOSETAIL MALE THREAD
CODE
G8001151
G8001153
G8001201
G8001203
G8001205
G8001251
G8001252
THREAD SIZE (BSP)
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1”
SUIT I.D. HOSETAIL
13 mm
19 mm
12 mm
19 mm
25 mm
19 mm
25 mm
LIST (EX GST)
$4.26
$4.35
$4.43
$4.52
$4.61
$4.96
$5.04
CAT
C
C
C
C
C
C
C
HOSETAIL ELBOW 90° MALE THREAD
Tank & Hose Fittings
CODE
G8011101
G8011151
G8011153
G8011203
G8011252
THREAD SIZE (BSP)
3/8”
1/2”
1/2”
3/4”
1”
SUIT I.D. HOSETAIL
13 mm
13 mm
20 mm
25 mm
30 mm
LIST (EX GST)
$5.48
$5.48
$3.39
$5.48
$6.96
CAT
C
C
C
C
C
HOSETAIL ELBOW 90° FEMALE THREAD
CODE
G8010201
G8010203
THREAD SIZE (BSP)
3/4”
3/4”
SUIT I.D. HOSETAIL
19 mm
25 mm
LIST (EX GST)
$3.39
$3.48
CAT
C
C
SINGLE PIECE 90° ELBOW WITH BACK NUT
CODE
G8039151
G8039201
G8039251
THREAD SIZE (BSP)
1/2”
3/4”
1”
SUIT I.D. HOSETAIL
15 mm
19 mm
25 mm
LIST (EX GST)
$4.61
$8.70
$9.57
CAT
C
C
C
THREAD SIZE (BSP)
1/2”
3/4”
1”
LIST (EX GST)
$5.83
$5.57
$5.83
CAT
C
C
C
THREAD SIZE (BSP)
1”
1 1/4”
1 1/2”
LIST (EX GST)
$9.57
$5.91
$11.30
CAT
C
C
C
REDUCING NIPPLE MALE/MALE
CODE
2402020
G8058151
G8058201
THREAD SIZE (BSP)
1/4”
1/2”
3/4”
REDUCING NIPPLE MALE/FEMALE
CODE
G8059203
G8059204
G8059401
THREAD SIZE (BSP)
3/4”
3/4”
2”
TEE PIECE FEMALE
CODE
G8026151
G8026201
THREAD SIZE (BSP)
1/2”
3/4”
LIST (EX GST)
$6.00
$6.00
CAT
C
C
THRU TANK FITTINGS (TANK OUTLETS)
Ideal when you need an extra outlet on your sprayer tank. Simply cut a hole to size and fit to tank. Comes with back nut and seal
washer. Fitting is threaded inside and out.
CODE
JA-1804084
p.114
BRASS TANK OUTLET
3/4” x 1/2”
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
LIST (EX GST)
$40.00
CAT
C
Tank & Hose Fittings
BARBED TEE PIECES
CODE
SUIT I.D. HOSETAIL LIST (INC GST)
CAT
320-T38
320-T12
320-T34
3/8”
1/2”
3/4”
C
C
C
$4.26
$2.70
$2.26
G8044151
2102030
G8044251
G8044301
G8044351
Feature continuous rolled thread with hexagonal
head for screwdriver
or spanner tightening.
10MM
187-MH05
$1.04
C
12MM
187-HS06
$1.57
C
THREAD
SIZE (BSP)
1/2”
3/4”
1”
1 1/4”
1 1/2”
CODE
HOSE CLAMPS
TO FIT HOSE I.D.SIZE
HOSE CLAMP
8MM
CODE
187-MH04
LIST (ex GST)
$1.48
CAT
C
BLANKING CAPS FEMALE THREAD
20MM
187-HS12
$1.91
C
THREAD
LENGTH
15 mm
13 mm
21 mm
18 mm
19 mm
LIST
(EX GST)
$2.87
$2.96
$4.00
$4.52
$7.22
CAT
C
C
C
C
C
MALE PLUG
CODE
THREAD SIZE (BSP)
G8046151
G8046201
1/2”
3/4”
OVERALL
LENGTH
15 mm
17 mm
LIST
(EX GST)
$4.00
$4.00
CAT
C
C
CODE
THREAD SIZE (BSP)
OVERALL LENGTH
LIST (EX GST)
CAT
G8050151
G8050201
G8050251
G8050302
G8050351
1/2”
3/4”
1”
1 1/4”
1 1/2”
43 mm
43 mm
50 mm
48 mm
48 mm
$5.91
$6.00
$6.00
$6.00
$7.57
C
C
C
C
C
THREAD
SIZE (BSP)
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
CODE
G8042151
G8042201
G8042251
G8040301
G8040351
G8040401
THREAD LENGTH
13 mm
13 mm
13 mm
15 mm
15 mm
17 mm
LIST
(EX GST)
$3.04
$3.04
$3.04
$3.04
$5.04
$5.57
CAT
C
C
C
C
C
C
NIPPLES
CODE
G8056151
G8056152
G8056201
G8056251
G8056252
G8056301
G8056351
THREAD SIZE (BSP)
1/2”
1/2”
3/4”
1”
1”
1 1/4”
1 1/2”
OVERALL LENGTH
54 mm
63 mm
40 mm
64 mm
50 mm
68 mm
68 mm
LIST (EX GST)
$5.57
$5.57
$6.00
$7.04
$6.35
$8.00
$8.09
CAT
C
C
C
C
C
C
C
FLAT GASKET
CODE
FLAT GASKET FOR
TANK WALL FITTINGS
GG00002008
GG00002004
GG00002012
GG00002010
GG00002006
GG00002014
GG00002016
GG00002018
GG00001014
G 1/2”
G 3/8”
G 1”
G 3/4”
G 1 1/4”
G 1 1/2”
G 2”
GASKET FOR FEMALE
BLANKING CAPS
G 3/4”
G 1 1/2”
G 1 1/4”
G 1”
G 2”
G 1/2”
LIST
(EX GST)
CAT
$1.57
$1.57
$2.00
$1.83
$1.30
$1.91
$2.17
$2.43
$0.87
C
C
C
C
C
C
C
C
C
O-RING
O-RING
CODE
GG00001002
GG00001012
GG00001018
GG00001022
C1210-173
G10071V
FLAT GASKET FOR TANK WALL FITTINGS
G 1/2”
GASKET FOR FEMALE
BLANKING CAPS
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
LIST
(EX GST)
$0.52
$0.61
$1.39
$1.65
$0.35
$0.35
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
CAT
C
C
C
C
C
C
p.115
Tank & Hose Fittings
BACK NUT FEMALE
TANK OUTLET
Born to Perform
Tank & Hose Fittings
ELBOW
CODE
116210
G8012200
G8012251
G8012203
G8012252
G8012301
G8012350
G8012353
G8012355
G8012400
SIZE
1/2”
3/4”
1”
3/4”
1”
1 1/4”
1 1/2”
1 1/2”
1 1/2”
2”
SUIT I.D. HOSETAIL
10 mm
13 mm
19 mm
19 mm
25 mm
25 mm
25 mm
35 mm
40 mm
40 mm
LIST (EX GST)
$5.57
$5.48
$7.30
$4.96
$7.13
$7.13
$7.48
$5.74
$8.61
$5.34
CAT
C
C
C
C
C
C
C
C
C
C
ELBOWS
Tank & Hose Fittings
CODE
G8021151
G8019201
THREAD SIZE (BSP)
1/2” M
3/4” F
THREAD SIZE (BSP)
1/2” F
3/4” F
LIST (EX GST)
$5.04
$7.48
CAT
C
C
HOSETAIL
CODE
G8002151
G8002200
G8002202
G8002250
G8002252
G8002254
G8002301
G8002350
G8002355
SIZE
1/2”
3/4”
3/4”
1”
1”
1”
1 1/4”
1 1/2”
1 1/2”
SUIT I.D. HOSETAIL
13 mm
13 mm
19 mm
13 mm
19 mm
25 mm
25 mm
25 mm
40 mm
LIST (EX GST)
$3.74
$3.83
$3.91
$4.35
$2.61
$2.70
$4.43
$5.91
$6.26
CAT
C
C
C
C
C
C
C
C
C
SUIT I.D. HOSETAIL
25 mm
35 mm
50 mm
LIST (INC GST)
$6.52
$7.57
$6.78
CAT
C
C
C
HOSETAIL FEMALE THREAD
CODE
G8000303
G8000306
G8002402
SIZE
1 1/4”
1 1/4”
2”
FLY NUT
CODE
G8040151
G8040152
G8040202
G8040251
G8040301
THREAD SIZE (BSP) (F)
1/2”
1/2”
3/4”
1”
1 1/4”
LIST (INC GST)
$2.78
$2.78
$2.78
$3.04
$3.04
CAT
C
C
C
C
C
G8040351
1 1/2”
$5.04
C
G8040401
2”
$5.57
C
DRAIN OUTLET ASSEMBLIES
Pictured: Assembled
p.116
Pictured: Unassembled Drain Outlet
CODE
220020A
220030A
220040A
220050A
220060A
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
THREAD SIZE (BSP)
1/2”
3/4”
1”
1/4”
1 1/2”
LIST (INC GST)
$17.39
$17.39
$17.39
$17.39
$20.87
CAT
C
C
C
C
C
Tank & Hose Fittings
Sight level
TANK KIT SIGHT GAUGE
Ideal for fitting to all types of tanks including poly, fibreglass or steel. Supplied in kit
form and includes fittings which insert into tank wall, fluorescent sight ball and EPDM
transparent PVC hose which makes gauging tank contents easy.
CODE
BRA-1688041
Tank Wall
LENGTH SIZE (MM)
1130
HOLE SIZE (MM) I.D.
19
LIST (EX GST)
$57.39
CAT
C
Brass Connectors & Fittings
Manufactured from high quality brass to ensure exceptional durability and long life.
Non-corrosive and chemical resistant, these brass fittings can be utilised in many
applications where durability under high pressure and stress is essential.
Can be used in conjunction with all BSP fittings.
HOSETAIL
THREAD SIZE BSP
1/4”Male
1/4”Male
1/2”Male
1/2”Male
TAIL SIZE
3/8”
1/2”
1/2”
3/8”
LIST (EX GST)
$2.87
$2.78
$6.43
$9.57
CAT
C
C
C
C
BRASS HOSE CONNECTORS
Manufactured from high quality brass and may be used in conjunction with any BSP fittings.
1
2
CODE (2 PACK)
NUT & TAIL
NUT & ELBOW
G8304004-PK
G8304005-PK
G8304008-PK
REF
HOSE SIZE (MM) I.D.
LIST (EX GST)
CAT
1
1
2
10
12.5
12.5
$14.78
$14.78
$30.43
C
C
C
HOSE REEL SWIVELS
1
2
Reduce the frustration of kinked/knotted hoses.
CODE
JA-1804063
JA-1804064
1
2
3
4
1
2
REF
1
2
FITTING
1/2” BARB x 1/2” BSPM
3/4” BARB x 3/4” BSPM
LIST (EX GST)
$24.35
$37.39
CAT
C
C
HOSE SNAP COUPLINGS
A quick release hose fitting featuring liquid shut-off. Ideal for quick disconnection of
spray guns from hosereels. Manufactured from corrosion resistant materials.
POLY - Maximum pressure 1450kPa (210psi).
BRASS - Maximum pressure 3000kPa (435psi).
CODE
406-03-PK
406-02-PK
406-031
406-032
406-02M
406-02F
REF
1&2
3&4
1
2
3
4
COUPLING TYPE
Complete Set
Complete Set
Male
Female
Male
Female
MATERIAL
Poly
Brass
Poly
Poly
Brass
Brass
CONNECTION SIZE
1/2” BSPT (M)
1/2” BSPT (M)
1/2” BSPT (M)
1/2” BSPT (M)
1/2” BSPT (M)
1/2” BSPT (M)
LIST (EX GST)
$60.87
$100.00
$9.57
$51.30
$15.65
$71.30
CAT
C
C
C
C
C
C
ATV HOSE SNAP COUPLINGS
A quick release hose fitting featuring liquid shut-off. Maximum pressure 30 bar (435psi)
CODE
13SFTF08
13SFTF10
13SFTF12
13KATF08
13KATF10
13KATF12
REF
1
1
1
2
2
2
HOSETAIL SIZE
8mm
10mm
13mm
8mm
10mm
13mm
LIST (EX GST)
$5.13
$5.13
$5.13
$23.48
$23.48
$23.48
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
CAT
C
C
C
C
C
C
p.117
Tank & Hose Fittings
CODE
474-191
474-200
474-207
474-209
Choosing The Right Pump
Born to Perform
Choosing The Right Pump
Garden Pumps
Submersible Pumps
p.118
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Choosing The Right Pump
GARDEN PUMPS
The following pumps start from very
simple on/off switch control to a fully
electronic energy saving model. They
are a serious selection of pumps for the
distribution of water. The following chart
details the performance of each pump
for ease of application.
WATTS
MAX
HEAD M
Gardenjet 750
N4176950
600
43
GPP40
GPP40
450
Autojet 1000
MAX. FLOW
RATE L/MIN
MAX.
PUMP
SUCTION M BODY
CONTROL
IP
FITTINGS
WEIGHT
PACKING MM
KG
45
7
Poly
On/Off
switch
44
1”
8.8
385x280x190
38
40
9
Stainless
steel
Press
controller
44
1”
9
320x320x160
N4176790-01 800
46
55
7
Poly
Press
controller
44
1”
8.9
425x396x210
Speroni
SM85-3
800
35
80
9
Stainless
steel
Press
controller
44
1”
9.5
420x280x230
Waterpress 750
N5209840
600
43
45
7
Cast iron
Pressure
switch
44
1”
13.8
520x495x300
Waterpress
1000
N5209570
800
46
55
7
Stainless
steel
Pressure
switch
44
1”
13.8
603x540x293
Waterpress
1500
N5209830
1100
48
70
7
Stainless
steel
Pressure
switch
44
1”
15.8
603x540x293
Ergon
N4300020
520/800 18/30
83
5
Poly
Electronic
44
1”
8
320x390x240
TAP RATING
CLEAR WATER PUMPS
WASTE WATER PUMPS
We have a choice of submersible
pumps suitable for clear water to the
transferring of flood water and domestic
waste water. This second chart details
our range to help with your application.
CODE
CLEAR
WATER
WASTE
WATER
MAX
WATTS HEAD
M
MAX. FLOW
RATE L/MIN
PUMP
BODY
MIN DRAIN
LEVEL MM
MAX SIZE
IMPURITIES
PUMP
OUTLET
MAX.
WEIGHT
PACKING MM
SUB. M KG
MAX
STARTS
PER
HOUR
FP7K
N1041200 250
6
130
Poly
10
6
11/4”
7
3.8
320X215X185 30
VIP130/6
N1041100 320
6
130
Poly
20
6
11/4”
7
3.9
325X230X195 30
FP14KVX
N2101140 600
8
230
Stainless
36
steel
22
11/4”
5
5.3
345X200X186 30
VF150
VF150
180
7
150
Cast iron 30
15
11/4”
6
10
180X180X160 30
VIP180/6
N2101090 480
6
180
Poly
30
25
11/4”
7
4.2
325X230X195 30
OMNIA200
N2081060 750
8
200
Stainless
35
steel
20
11/4”
7
8.5
325X230X195 30
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.119
Choosing The Right Pump
CODE
Born to Perform
Garden Watering Pump
Selecta Water garden pumps are ideal to irrigate
lawns and flowerbeds, wash terraces or outdoor
floors, and fill or drain reservoirs and basins.
GARDENJET 750
CODE
WATTS
MAX
HEAD M
N4176950
600
43
MAX. FLOW
RATE L/MIN
45
MAX.
PUMP
SUCTION M BODY
CONTROL
IP
7
On/Off
switch
44
Poly
SELECTA WATER GPP40 PUMP
• 60°C maximum water temperature
• 1°-50°C ambient temperature range
• I 1”x1” BSPF nlet/outlet
• Dimensions including minipress H320 x L320 x W160 mm
• Stainless steel pump casing
• Noryl impeller
• Carbon/ceramic mechanical seal
• TEFC continuously rated type TEFC continuously rated
• 2900rpm nominal speed
• Class B insulation class
• 230V (+/- 10%) 50Hz frequency
• Voltage
• 450W power
• 2.8A rated FLC
WATTS
MAX
HEAD M
GPP40
450
38
p.120
MAX. FLOW
RATE L/MIN
40
MAX.
PUMP
SUCTION M BODY
9
FITTINGS
WEIGHT
KG
PACKING MM
LIST
EX GST
CAT
1”
8.8
385x280x190
$198.26
B
45
The Selecta Water GPP40 is ideal for pumping rainwater from your tank for garden
watering, washing cars, sprinklers and small irrigation systems.
CODE
TAP RATING
50
Stainless
steel
40
H (Metres)
Garden Watering Pump
• Single phase, asynchronous electric motor with built-in thermal relay.
• Stainless steel motor shaft
• Hydraulic system in Noryl, single jet
• 1.5m power cable, main switch and pipe-holder fitting with 25mm diameter
• 1” inlet and outlet
• Suitable for clear water with max temperature of 50°C
• Not suitable for sea or waste water or water containing
corrosive or easily flammable fluids
35
30
25
20
15
10
5
0
CONTROL
IP
Press
controller
44
0
TAP RATING
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
10
20
30
40
Q (L/min)
50
60
70
FITTINGS
WEIGHT
KG
PACKING MM
LIST
EX GST
CAT
1”
9
320x320x160
$479.60
B
Automatic Pumps
AUTOJET 1000 PUMP
Ideal to irrigate lawns and flowerbeds, wash decks and outdoor areas,
and fill empty reservoirs. It can also be used as an automatic pump to
pressurise and automate domestic water systems.
The Autojet pump is available with polypropylene body, and features an
innovative electronic control ‘Pressuremate 1.5’. This starts the pump
every time water is requested, and maintains constant pressure during
delivery. If no water is supplied, the electronic system stops the pump to
protect it from dry running.
ON
Comes with a LED panel to control the operating status of the pump, and
ATI
PER G
O
shows you if the pump is connected, running, if water flow is present, TOMATICRUNNINN
U
O
Y
• A • DR TECTI
if there are any unusual conditions.
PRO
TIPS:
CODE
WATTS
MAX
HEAD M
N4176790-01
800
46
MAX. FLOW
RATE L/MIN
55
MAX.
PUMP
SUCTION M BODY
CONTROL
IP
7
Press
controller
44
Poly
TAP RATING
SPERONI WATER PUMP
WATTS
SM85-3 900
MAX
HEAD M
35
MAX. FLOW
RATE L/MIN
90
WEIGHT
KG
PACKING MM
LIST
EX GST
CAT
1”
8.9
425x396x210
$521.74
B
40
• Motor single phase 230V 50Hz
• 0.8kw
• 4 Amps
• Continuous duty cycle
• Centrifugal, Self priming
• multistage impellers (3)
• Max working pressure 800KPa
• Dry run protection fitted
• Max liquid temp 35º
• Max ambient temperature 40º
• Stainless steel pump body
• Impeller Noryl
• Stainless steel Pump flange
• Shaft with rotor Stainless steel
• Mechanical Seal Carbon/Ceramic
CODE
FITTINGS
H (Metres)
35
30
25
20
15
10
0
0
MAX.
SUCTION M
PUMP
BODY
CONTROL
IP
9
Stainless
steel
Press
controller
44
TAP RATING
15
30
45
60
Q (L/min)
75
90
FITTINGS
WEIGHT
KG
PACKING MM
LIST
EX GST
CAT
1”
9.5
420x280x230
$703.70
B
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.121
Automatic Pumps
• Before starting the pump, fill the pump
body and suction pipe with water
• Protect the treading with Teflon straps
to guarantee waterproof seal
• For permanent installations, you can
install a check valve between the pump
outlet and the pipe
• It is advisable to use a 25mm
discharge hose
• Sand and other corrosive materials can
provoke rapid wear so it is advisable to
use a filter
Born to Perform
Pressurising Tanks
WATERPRESS SERIES
Ideal for pressurizing household water supply to boost the
pressure of water and guarantee availability of adequate
water pressure to all points in the house, including upper
floors. The system starts on demand. Water supply in the
tanks avoids the need to start the pump when small volumes
of water are required. This protects the pump from excessive
wear and reduces power consumption.
FEATURES INCLUDE
Pressurising Tanks
• Asynchronous electric motor with built-in thermal relay and AISI 416 stainless steel motor shaft
• NORYL hydraulic system, single-impeller, type JET or multi-stage
• IPX4 Protection Class
• Insulation class: F
• All models with an input power inferior to 1000 Watt, have a 1.5 power cable and plug.
• Device for the adjustment and measurement of pressure (standard or electronic)
• Expansion tank in steel, pearl-colour, to improve aesthetics and make
the booster set more suitable for indoor installation.
• Start and stop pressure are preset by the manufacturer (adjustable for specific and different requirements).
• Suitable for clear water with a maximum temperature of 50º/35ºC according to the model
• Not suitable for sea water or for water containing corrosive or easily substances
• Maximum recommended suction height: 7m
TIP:
It is advisable to check the precharge pressure of a tank. It must
be done with an empty tank with
the boosterset disconnected to
the power supply.
Waterpress 750
Pictured: N5209840
Waterpress Inox 1000
Pictured: N5209570
CODE
WATTS
MAX
HEAD M
N5209840
600
43
N5209570
800
N5209830
1100
p.122
MAX. FLOW
RATE L/MIN
Waterpress Inox 1500
Pictured: N5209830
MAX.
SUCTION M
PUMP
BODY
CONTROL
IP
FITTINGS
WEIGHT
KG
PACKING MM
LIST
EX GST
CAT
45
7
Cast iron
Pressure
switch
44
1”
13.8
520x495x300
$301.74
B
46
55
7
Stainless
steel
Pressure
switch
44
1”
13.8
603x540x293
$460.87
B
48
70
7
Stainless
steel
Pressure
switch
44
1”
15.8
603x540x293
$643.48
B
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
TAP RATING
Automatic Pumps
ERGON 5000 ELECTRONIC PUMP
ERGON 5000 is a completely automatic pump
with variable speed and constant pressure
working, suitable for irrigation and for domestic
water supply. With ERGON it is possible to set
the pressure on 3 different levels thanks to the
keyboard , while the LCD Display shows in every
moment information on the working parameters
(working pressure, consumption, motor speed).
Differently from the standard conventional or
automatic pumps, ERGON 5000 is equipped with
a special software which allows to adapt the use
of the pump to suit requirements, leading to an
energy saving up to 35%.
ING
SAV
RGY
%
ENE TO 35
UP
Typical include
• Energy saving up to 35%
• Constant working pressure: the keyboard allows the pressure setup
• Electronic Integrated dry running protection with automatic reset.
• Automatic start-up and stop. Back-lit LCD display to control the working status
• Electronic variable speed control for energy saving and lower pump wear
• Refill kit with check valve supplied to avoid the emptying of the pump and for
easy filling.
• Multistage electronic pump with extremely quiet working.
• Max temperature for pumped fluid: 35° C
• Power cable: 1.5m
CODE
WATTS
MAX
HEAD M
N4300020
520/800
18/30
MAX. FLOW
RATE L/MIN
83
MAX.
SUCTION M
PUMP
BODY
CONTROL
IP
5
Poly
Electronic
44
TAP RATING
FITTINGS
WEIGHT
KG
PACKING MM
LIST
EX GST
CAT
1”
8
320x390x240
$826.09
B
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.123
Automatic Pumps
Energy saving up to 35%
Born to Perform
Selecta Power Water Transfer Pumps
The Selecta Power Water Transfer pumps are designed to handle all kinds of high volume water pumping. They
are ideal for applications where portability is a must or electrical power supply is a problem.
Selecta Power Water Transfer Pumps
SELECTA POWER FIRE
FIGHTING PUMP
The Selecta Power pump/engine unit is ideal for fire fighting
and watering, and comes standard with a carry/mounting frame
for increased mobility and added protection.
• 4 -stroke over head cam engine with oil alert
• Max 250L/min open flow, Max 100psi pressure
• Direct coupled centrifugal, twin impeller fire fighting pump
• Maximum suction lift 3.5 metres
• 1 x 11/2” inlet, 2 x 1” outlet, 1 x 11/2” outlet
• Optional hose kit (Code: LBA-100A) consisting of 20m fire
fighting hose, nozzle, 6m suction hose and foot filter
Optional
LBA-100A hose kit
DRAWING
5070
CODE
ENGINE TYPE
HP
MAX PRESSURE KPA/PSI
MAX OUTPUT
LENGTH
WIDTH
HEIGHT
WEIGHT (DRY)
LIST (EX GST)
CAT
LBA-100
Selecta Power
6.5
690kPa/100psi
250 L/min
500mm
370mm
400mm
31kg
$660.87
A
OPTION CODE
DESCRIPTION
SUCTION HOSE
DELIVERY HOSE
LBA-100A
Water transfer hose kit
6m x 40mm ID with foot filter
20m x 19mm ID with adjustable nozzle
328-254-28
Seal kit - Mechanical
Pictured:
LBA-102
Pictured:
LBA-115
FOUR STROKE COMPACT
WATER PUMP
• Portable centrifugal water pump
• Ideal for fire control, watering and washing
• 115 L/min open flow
• 40 psi max. pressure
• 3 metres suction Lift
• Outlet and inlet connections 1” BSP (25mm)
• Handy carry handle
Motor Features:
• 4 Stroke, 33cc capacity
• Recoil start
• 0.6 Litre fuel tank capacity
• Petrol powered - No mixing
Code: LBA-115
LIST (EX GST)
$290.43
A
$33.04
B
Pictured:
LBA-103
DRAWING
CAT
DRAWING
5177
5176
2 INCH WATER
TRANSFER PUMP
3 INCH WATER
TRANSFER PUMP
• 6.5Hp engine with oil alert
• Max 460 L/min open flow, Max 32
psi pressure.
• Supplied with 2 x 2” nut and tail
connectors plus suction foot filter
• 2” Inlet, 2” outlet with maximum
suction lift 3 metres
• 20 metre discharge head
Code: LBA-102
• 6.5Hp engine with oil alert
• Max 800 L/min open flow, max 32 psi pressure.
• Supplied with 2 x 3” nut and tail
connectors plus suction foot filter
• 3” Inlet, 3” outlet with maximum
suction lift 3 metres
• 20 metre discharge head
Code: LBA-103
CODE
ENGINE
TYPE
POWER
MAX PRESSURE
KPA/PSI
MAX
OUTPUT
LENGTH
WIDTH
HEIGHT
WEIGHT
(DRY)
LIST
(EX GST)
CAT
LBA-115
4 Stroke
1.21HP
115kPa/40psi
115 L/min
420mm
300mm
360mm
8kg
$486.96
A
LBA-102
4 Stroke
6.5HP
220kPa/32psi
460 L/min
500mm
370mm
460mm
27kg
$660.87
A
LBA-103
4 Stroke
6.5HP
220kPa/32psi
800 L/min
500mm
370mm
480mm
30kg
$695.65
A
186-25A
1” clear wire reinforced suction hose to suit LBA-115 - available per metre
$15.65
B
186-50S
2” clear wire reinforced suction hose to suit LBA-102 - available per metre
$30.43
B
186-75
3” grey PVC suction hose to suit LBA-103 - available per metre
$65.22
B
p.124
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
Clear Water Submersible Pumps
Selecta Water submersible pumps for clear
water have been designed to drain standing
water and domestic waste water, empty and
dry flooded rooms, and draw water from wells,
basins or cisterns. Models with a floating
switch can run automatically. The wide range
of models enables every user to find the pump
that best suits their needs.
FEATURES INCLUDE
S
OU
TINU
CON UTY
D
Clear Water FP7K
Clear Water VIP130/6
• The VIP submersible pumps have
ceramic reinforcing elements on
the shaft that guarantees a longer
life and enables them to be used in
continuous mode.
Some important instruction for installation:The connector supplied with the
submersible pumps of the Flotec line can be adjusted according to the dimension
of the hose used. If the hose has a diameter (Ø) of 13mm, apply the fitting directly
on the third stage (Fig. 1); if the hose has a diameter of 19 or 25 mm, remove the
stages that are not used (Fig. 2 - 3).If a Flotec drainage hose with a diameter of
32 mm is used (Art. ZB401830), this can be applied directly on the pump outlet or
on the 90° curved fitting supplied with the pump.
WATTS
MAX
MAX. FLOW PUMP MIN DRAIN MAX SIZE
PUMP
MAX.
WEIGHT
PACKING MM
HEAD M RATE L/MIN BODY LEVEL MM IMPURITIES OUTLET SUB. M KG
MAX
LIST
STARTS
EX GST
PER HOUR
MODEL
CODE
FP7K
N1041200 250
6
130
Poly
10
6
11/4”
7
3.8
320X215X185 30
$123.48 B
VIP130/6
N1041100 320
6
130
Poly
20
6
11/4”
7
3.9
325X230X195 30
$249.57 B
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
CAT
p.125
Clear Water Submersible Pumps
• Asynchronous single-phase motor with built-in thermal relay
• Class F motor winding
• AISI 303 STAINLESS steel motor shaft
• Single-impeller hydraulic system in NORYL
• IP X8 Protection Class
• All models have a 10m power cable
• All models are available in the automatic version with floating switch
• Suitable for clear water with a maximum temperature of 40° / 35°C
according to the model.
Waste Water Submersible Pumps
Waste Water Submersible Pumps Born to Perform
Selecta Water submersible pumps for waste
water are an essential requirement when
it is necessary to transfer water containing
suspended solid with a maximum diameter
of 25mm. Therefore, they are particularly
suitable to drain cesspools, remove flood
water and transfer sewage from sump.
It is sufficient to choose the article that best
suits your actual needs, from the practical
plastic model with limited dimensions to
the more professional steel version if usage
requires more resistant material.
FEATURES INCLUDE
• Asynchronous single-phase electric motor with built-in
thermal relay.
• Stainless steel motor shaft
• IP X8 Protection Class for the electric parts
• All models come with a 10 m power cable
• Reinforcing elements in ceramic fitted on the drive motor
to allow the pump to be used in continuous mode.
• Immerse at a minimum depth of 7 m.
• Insulation class : F
Pictured:
FP14KVX
CONT
INUO
DUTY US
Pictured:
VIP180/6
MIN DRAIN
LEVEL MM
MAX SIZE
PUMP MAX. WEIGHT
PACKING MM
IMPURITIES OUTLET SUB. M KG
MAX
LIST
STARTS
EX GST
PER HOUR
CODE
FP14KVX
N2101140 600
8
230
Stainless
36
steel
22
11/4”
5
5.3
345X200X186 30
$349.57 B
VIP180/6
N2101090 480
6
180
Poly
25
11/4”
7
4.2
325X230X195 30
$352.17 B
p.126
WATTS
MAX
MAX. FLOW PUMP
HEAD M RATE L/MIN BODY
MODEL
30
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
CAT
Waste Water Submersible Pumps
Selecta Water Submersible Sump Pumps
VF 150
Ideal for almost any drainage application from the cost
effective and dependable units to the professional
quality, highly featured Omnia unit. A large range of
all-stainless construction drainage pumps makes our
range second to none.
VF 150 is a single phase drainage pump.
They are a handy asset to plumbers,
drainers and general house holders.
Applications include septic effluent
disposal, water transfer, grey water and
sump pumping liquid including grey
water of neutral pH with soft solids up
to 15mm O.D. at a 10% content or fine
solids at 1% concentration.
7
6
Head (metres)
SMHW550
4
3
2
1
0
0
20
40
60
80
100
120
140
Flow (litres/minute)
Customer Benefits
Cast Iron Construction
Strong and durable for longer pump life
Vortex Impeller
Capable of handling soft solids up to 15mm
Optimum Performance
4 metres head 80 litres per minute
Automatic Float Switch Operation
Protection against pump running dry
Lip Seal and Dual Mechanical Seal Improved service life
CODE
WATTS
MAX
MAX. FLOW
HEAD M RATE L/MIN
PUMP
BODY
VF150
180
7
Cast iron 30
150
Product Features
MIN DRAIN
LEVEL MM
MAX SIZE
IMPURITIES
PUMP
OUTLET
MAX.
SUB. M
WEIGHT
KG
PACKING MM
MAX STARTS
PER HOUR
LIST
EX GST
15
11/4”
6
10
180X180X160
30
$377.60 B
CAT
OMNIA 200 STAINLESS STEEL PUMP
These pumps are entirely manufactured in AISI 304
STAINLESS STEEL to guarantee the utmost reliability:
• STAINLESS steel pump body
• STAINLESS steel suction grid plate
• STAINLESS steel shaft with reinforcing ceramic inserts to guarantee a longer life
and allow the pump to be used in continuous mode
• Die-cast STAINLESS steel impeller
• Oil chamber for seal lubrication
• Protection/insulation class : IPX8/F
CONTINUOUS
DUTY
OM
NIA
20
0/8
CODE
WATTS
MAX
HEAD
MAX. FLOW
RATE L/MIN
PUMP
BODY
MIN DRAIN
LEVEL MM
MAX SIZE
IMPURITIES
PUMP
OUTLET
MAX.
SUB. M
WEIGHT
KG
PACKING
MAX
LIST
STARTS PER
EX GST
HOUR
N2081060
750
8
200
Stainless
steel
35
20
11/4”
7
8.5
325X230X195
30
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
CAT
$660.87 B
p.127
Waste Water Submersible Pumps
5
Terms & Conditions
Born to Perform
The following are the terms and conditions of sale for the goods shown herein. These terms may be changed at
the company’s discretion by written notice to the customer. Should these conditions of sale differ in any respect
from the customer’s order, acceptance or confirmation then these conditions shall apply.
Where the word ‘Company’ appears in these terms and conditions it means in all cases Silvan New Zealand Pty. Ltd.
Prices: All prices shown are recommended prices only and exclude any dealer freight charges. Prices and
product specifications are subject to alteration without notice. Purchase discounts (if any) will be allowed at the
rates agreed in writing between the Company and the customer.
GOODS AND SERVICES TAX
(i) All amounts are tax exclusive amounts unless otherwise stated, all amounts expressed or described in
this agreement are GST exclusive amounts.
(ii) All amounts to be increased for any GST
Subject to paragraph (iv) of this section, if any GST (within the meaning of the A New Tax System (Goods and
Services Tax Act 1985 No 141 as amended from time to time, OGST) is payable by any party (‘Supplier’) in
respect of the supply of any goods, services, real property or any other things to another party (‘Recipient’), then
the amount expressed or described in this Agreement (‘Original Amount’) is to be increased so that the Supplier
receives an amount (‘Increased Amount’) which, after subtracting the GST liability of the Supplier on that
Increased Amount, results in the Supplier retaining the Original Amount after payment of that GST liability.
Terms & Conditions
(iii) Supplier to assist Recipient
The Supplier will do all things reasonably available to it to assist the Recipient to claim on a timely basis any
input tax credits (if any) the Recipient may be entitled to claim for any acquisition of goods, services, real
property or any other thing from the Supplier. This includes the Supplier maintaining its registered status for
GST purposes, and issuing tax invoices for supplies made under this Agreement on a timely basis as reasonably
requested by the Recipient.
(iv) Amounts to be reduced for benefits of GST related reforms
The Supplier acknowledges that under the GST Law the Supplier is required, from the date the GST is imposed,
and at all times that GST related tax reform takes effect, to reduce the consideration payable by the Recipient
to the extent that the cost to the Supplier of supplying any goods, services, real property or other things under
this Agreement is reduced by the abolition or reduction in other taxes which would otherwise be payable by the
supplier in respect of the goods or services supplied under this agreement.
Delivery:
Prices shown are ex warehouse from our Hamilton Branch office except where the company has agreed to
supply goods free into store.
The risk in the goods, shall unless otherwise agreed in writing pass to the Customer upon despatch from the
Company’s warehouse, except where the goods are carried in the Company’s own vehicles or where a free in
store contract has been agreed, when the risk in the goods shall pass upon delivery to the Customer or their
agent. The Company is not responsible for loss or damage of goods in transit except when the goods are carried
in the Company’s own vehicles.
Delivery dates are approximate only and no liability is accepted for delay from any cause whatsoever. If delivery
is hindered by any cause or reason beyond the Company’s control, the Company may extend the time for
delivery or if the Company is unable to complete, the contract shall be voidable at the Company’s option with no
right to either party for any damage, loss, cost or expense or otherwise.
Terms:
Unless otherwise stated payment is strictly within 30 days from the end of the month in which the goods are
purchased.
Liability:
Property in and title to goods provided from time to time by the Company to the customer shall remain with the
Company for all amounts due to the Company by the customer. However the goods will be at the risk of the
customer as soon as they are delivered to or to the order of the customer.
Property in and title to the goods shall remain with the Company even if the goods become affixed to or
incorporated in other goods.
Where the Company has received payment for the goods by means of cheque, payment in full shall not be
deemed to have occurred until such time as the customer’s cheque has been cleared and credited to the
Company’s banking account.
The Company, its’ employees, servants or agents are at liberty to enter upon the customer’s premises and
retrieve goods which were provided by the Company to the customer where the customer has not paid for the
goods or other goods supplied by the Company.
Warranty:
Conditions of Warranty are detailed on the Warranty forms accompanying all equipment. Our Warranty covers
faulty workmanship and materials and only genuine claims from our Servicing agents will be accepted for
assessment. Travelling, communication and transportation costs are not covered by warranty and must be borne
by the Customer. Damage during transport is not covered by warranty. Claims should be made directly by the
consignee to the carrier.
Nothing in this agreement shall be construed.
a) To be a waiver of any of the provisions herein by virtue of the failure on the part of either party hereto to
enforce its rights or to exercise any option or discretion herein or to prejudice the later exercise of such
rights, options or discretion’s.
b) To extend the application of these Terms and Conditions beyond that permitted by Law. Where a right or
remedy which is capable of exclusion, restriction or modification is granted to the Customer by Law, and
that Law allows the Company to limit its liability with respect to that right or remedy, then the liability of the
Company is limited solely to, a liability to pay to the Customer an amount equal to:
(i) The cost of replacing the goods
(ii) The cost of obtaining equivalent goods; or
(iii) The cost of having the goods repaired.
whichever is the lowest amount.
p.128
Call 1300 SILVAN or visit www.silvan.com.au
IMPORTANT DEALER INFORMATION
AVAILABILITY
Products within this Buyers Guide are available through authorised
Silvan Selecta dealers only.
TERMS
Will be the terms agreed with the seller.
PRICES
All prices are suggested list prices in New Zealand dollars. Prices
are subject to change without prior notice. For stocking incentive
programmes refer to your individual trading terms, or contact our
customer service staff on (07) 849 6030.
FREIGHT CHARGES
Prices are ex Silvan Distribution Centre in Hamilton. Check with our
warehouse supervisor for freight charges into your area. Freight
and handling charges will be added to the invoice amount.
MINIMUM ORDER VALUE
A $50 dealer nett ex GST Minimum Order Value is required for
standard orders. Orders under this value will attract a $20 excl.
GST handling charge.
Urgent or breakdown orders do not have a required Minimum Order
Value, and attract a $20 excl. GST priority fee.
RETURNS POLICY
Before returning any product to Silvan, a Return Authorisation (RA)
Number and approval form must be obtained from Silvan Customer
Service by phoning (07) 849 6030. Goods WILL NOT be accepted
without an RA number and form.
CANCELLATIONS:
1. Cancellations made on the same day the order was placed:
a. If the stock has not been picked, no handling
fee will apply
b. If the stock has been picked, a 15% restocking fee will apply
or a minimum of $10 plus freight.
2. Cancellations made after the day the order was placed, a 15%
restocking fee will apply plus freight
3. Especially procured items are NON REFUNDABLE
GOODS RETURN:
1. All returns must be requested within 14 days of the invoice date
2. Goods will only be accepted for credit if they are returned
undamaged and in saleable condition in the original packaging
3. Return freight will be paid by the Customer if the goods are
returned at the Customers volition, unless authorized by the
Company in writing prior to return of the goods
4. Electronic and electrical components are not returnable
5. All written claims must reference Silvan invoice numbers, and
must be dated and state the reason for the claim
6. A 15% restocking fee will be applied if the goods have been
dispatched according to your order or a minimum of
$10 plus freight.
7. Return of products valued under $50 nett excl. GST will not be
accepted if they had been dispatched according to your order
Returns can be completed on the Silvan Claim Form on page 130 of
this Selecta Buyers Guide.
CLAIMS:
Pricing & Freight Claims need to be made within 14 days of the
invoice date. Any credits after this for pricing discrepancies will not
be accepted.
Claims for Freight Damage need to be made on arrival, inspected
and noted on truck consigment note of damage. Claims received
after this will not be accepted. If freight damage has not been
logged with Silvan at the time of the order being received by
yourselves and noted on the con note docket the claim will
be invalid.
Claims can be completed on the Silvan Claim Form on page 130 of
this Selecta Buyers Guide.
DISCOUNT CODES
Please refer to individual Trading Terms for specific discounts on A
and C Categories.
Order Form
Wholegoods, Accessories And Spare Parts Products
Order Number:
Dealership name:
Delivery address:
Postcode
Type of Order
(Tick)
Breakdown or below $50
❑ ($20 excl GST fee)
❑ (Standard Discount)
❑ (Monthly Discount)
Daily
Telephone
Monthly
Contact:
Despatch per:
PRODUCT CODE
QTY
DESCRIPTION
PRICE
Order Form
Order Authorisation - This part must be signed:
I acknowledge that this order and the goods referred to will be suplied in accordance with Silvan’s standard terms and conditions of sale as defined on the opposite
page. Goods remain the property of Silvan until the whole of the purchase price has been paid by the purchaser.
Name
Signed
Date:
/
/
Fax: (07) 849 6070 or contact Silvan/Selecta Customer Service on (07) 849 6030
Call 1300 SILVAN or visit www.silvan.com.au
p.129
Internal use only: Claim #:
Internal use only: Claim #:
Silvan Australia Pty Ltd
Silvan Australia Pty Ltd
Phone 1300 745 826 Fax 1800 745 826
Phone 1300 745 826 Fax 1800 745 826
Born to Perform
CUSTOMERCC
LAIM FORM
USTOMER CLAIM FORM
Date:
Customer account code:
Customer account code:
Customer name:
Customer name:
Date:
Requested by:
Requested by:
Contact name and number:
Contact name and number:
Silvan invoice number:
Customer order number:
Silvan invoice number:
Customer order number:
Silvan invoice date:
Customer claim number:
Silvan invoice date:
Customer claim number:
Claim type:
 Return
 Pricing/Discount
 Other
Claim type:
 Return
 Pricing/Discount
 Other
Action Required:
 Credit
 Replace
Action Required:
 Credit
 Replace
NOTE: For warranty claims please refer to the Request for Warranty Assessment Form
NOTE: For warranty claims please refer to the Request for Warranty Assessment Form
Customer Claim Form
Reason for Claim: __________________________________________________________________________________
Reason for Claim: __________________________________________________________________________________
________________________________________________________________________________________________
________________________________________________________________________________________________
________________________________________________________________________________________________
________________________________________________________________________________________________
________________________________________________________________________________________________
________________________________________________________________________________________________
Ex-GST
Number of
Ex-GST
Incl-GST
Ex-GST
Number of
Ex-GST Value Incl-GST
Units
Extended Value
Extended
Part Number Claimed
Unit Credit
Units
Extended Value
Extended Value
Part Number Claimed
Unit Credit
(Q)
(Q) x (C)
(Q) x (C) + 10%
(C)
(Q)
(Q)
x
(C)
(Q) x (C) + 10%
(C)
Ancillary claim:
Freight/Other
Ancillary claim:
Handling Fee %
Freight/Other
Handling Fee %
$
Attach extra pages if required
TOTAL CREDIT REQUESTED
Attach extra pages if required
TOTAL CREDIT REQUESTED
Internal Use Only:
Internal Use Only:
Claim Log:
Opened by:
Claim Log:
Opened by:
Closed by:
Closed by:
Approved By:
Approved By:
Customer Service Mgr:
Customer Service Mgr:
Department Mgr:
Department Mgr:
$
Reason Code:
Date:
Date:
Reason Code:
Date:
Date:
Is item to be returned to stock?:
 Yes
 No
Return Warehouse:
Put Location:
Is item to be returned to stock?:
 Yes
 No
Return Warehouse:
Put Location:
Comments: _______________________________________________________________________________________
Comments: _______________________________________________________________________________________
________________________________________________________________________________________________
________________________________________________________________________________________________
Adjustment Note Comments: _________________________________________________________________________
Adjustment Note Comments: _________________________________________________________________________
________________________________________________________________________________________________
________________________________________________________________________________________________
Adjustment Note Number:
Processed by:
Process date:
Adjustment Note Number:
Processed by:
Process date:
Is item to be re-charged?:
 Yes
 No
Account No.
Re-Invoice number:
Is item to be re-charged?:
 Yes
 No
Account No.
Re-Invoice number:
Re-invoice comments: ______________________________________________________________________________
Re-invoice comments: ______________________________________________________________________________
Cause of error: ____________________________________________________________________________________
Cause of error: ____________________________________________________________________________________
________________________________________________________________________________________________
________________________________________________________________________________________________
Action to prevent reoccurrence: _______________________________________________________________________
Action to prevent reoccurrence: _______________________________________________________________________
________________________________________________________________________________________________
________________________________________________________________________________________________
Completed by:
Date:
Completed by:
Date:
Fax: (07) 849 6070 or contact Silvan/Selecta Customer Service on (07) 849 6030
p.130
Call 1300 SILVAN or visit www.silvan.com.au
CUSTOMER CLAIM FORM
Date:
Internal use only: Claim #:
Silvan Australia Pty Ltd
Phone 1300 745 826 Fax 1800 745 826
Customer account code:
Request for Warranty Assessment Form
Fax or post to:
Silvan Warranty Dept. P.O. Box 10088, Te Rapa, Hamilton 3241
Phone: (07) 849 6030
Email: [email protected] NZ Fax: (07) 849 6070
Call 1300 SILVAN or visit www.silvan.com.au
p.131
Request for Warranty Assessment Form
(07) 849 6070
Silvan Custom Build Quotation Form Born to Perform
Dealership / Customer Name:
Date:
Dealership / Customer Address:
Postcode:
Telephone:
Fax:
Contact Name:
Email:
Silvan Account Manager:
Transport Details:
Silvan Custom Build Quatation Form
To ensure we design a solution that meets your requirements, please carefully complete the following :
1: Is the required unit similar to an existing Silvan/Selecta unit? If so, please advise which unit and what options/changed specifications are required:
2: Please outline what the purpose of this unit is/what application will it be used in:
3: Are there any restrictions (dimensions, noise, weight etc):
4: Please outline the required specifications (complete only where applicable, please include the Silvan code where possible):
Tank size / Shape:
Frame:
Engine / Pump:
Chemical Induction:
Boom:
Lights:
Foam Marker:
Brakes:
Controls / Monitor:
Axle:
Hose Reel:
Wheels:
Hose:
Roadworthy Ready Required:
Spray Gun:
Other:
Yes
No
Filtration:
5: Please provide a general description of this unit/how you see it (if possible attach sketches and workings on design):
Quote authorisation:
I acknowledge that a quote for the product referred to will be
provided within 5 working days, unless otherwise informed on receipt
of this request.
Date required:
/
/
Name:
Signature:
PLEASE SEND THE COMPLETED FORM TO FAX: (07) 849 6070 OR CONTACT SILVAN/SELECTA CUSTOMER
SERVICE ON (07) 849 6030
Call Free on 0508 SILVAN (0508 745 826) or Visit www.silvannz.co.nz
p.132