GPS Navigator Read This First
Transcription
GPS Navigator Read This First
SPECIFICATIONS FOR P/N: 406-10133-00 Color: CMYK (4-color process) MATERIAL: FINISH SIZE: 16.5" x 16.5" (419 x 419mm) Start Here 1 Here’s what you’ll do with this guide: • Charge the GPS receiver. • Install the navigator software and maps onto an expansion card (sold separately). • Set up and activate the navigator software. Charging the GPS receiver c. Charge the battery until the battery light turns off (about four hours). Be sure to fully charge the battery before going on to the next step. a. Connect the charging cable to the AC charger and the GPS receiver. b. Plug the AC charger into an outlet. Installation requirements: • Windows 98/ME/NT/2000/XP with Internet access. • Palm® Desktop software. • A memory expansion card (sold separately) with at least 64MB of free memory. • Tungsten™ T3 handheld or Zire™ 72 handheld. For information on other supported devices, see the TomTom website at www.tomtom.com. Battery light Note: To use the Tungsten T3 in full screen mode you need to install a software patch which is available from the support section of the TomTom website, www.tomtom.com. 2 Install software and maps a. Connect the HotSync® cable to your device and to a USB port on the back of your computer. b. Insert the expansion card (sold separately) into the slot on your device. c. Insert CD #1 into your computer’s CD drive. Follow the installation instructions that appear on your computer screen. During the installation process, you may be asked to insert additional CDs containing map data. d. When prompted, synchronize your device to copy the navigator software and maps to your expansion card. During synchronization, you may be asked to select your username. USB Synchronization Note: Synchronization may take some time if you are copying large maps. 3 Set up software a. Start navigator on your device. c. b. Select your language preference. Select right- or left-handed operation. d. Select how distances are measured and time is displayed. Navigator e. Select Done to install the default voice for driving instructions. f. Make a written note of your device code. g. To get the activation code for your device, go to www.ttcode.com and enter the following: • The TomTom Navigator product code found on the TomTom Navigator CD package • Your device code, which was supplied by the navigator start-up wizard h. On your device, enter your activation code. Important! Save your product code, device code, and activation code for future reference. You must have them to install the navigator software and maps onto additional expansion cards for this device. i. Enter your home address. j. Select Other Bluetooth GPS and select Done. k. Establish a Bluetooth connection between the device and the GPS receiver: On your device, select palmOne GPS from Turn the GPS receiver on. the list. Enter the passkey 6268, and select Add to trusted device list. On Note: After the palmOne device and the GPS receiver are paired, the blue light on the GPS receiver blinks slowly. l. Follow the instructions onscreen for a brief tour of navigator. Navigator is now ready to use. Read Taking Your First Trip with GPS Navigator by palmOne to learn how to install the hardware in your vehicle and use navigator on your device. SPECIFICATIONS FOR P/N: 406-10133-00 Color: CMYK (4-color process) MATERIAL: FINISH SIZE: 16.5" x 16.5" (419 x 419mm) Troubleshooting Synchronizing maps takes a long time. Is this normal? Yes, the bigger the map, the longer it takes to synchronize. Synchronizing a large number of maps also takes longer. Look at the HotSync Progress dialog box to see what stage the process is in. During software setup, I was asked for a passkey when I selected the GPS receiver as my GPS device—what is this passkey for? Your device uses the passkey to establish a Bluetooth connection with the GPS receiver. The passkey for the GPS receiver is 6268. For detailed information about establishing a Bluetooth connection, read the documentation for your device. I completed the software setup, but I can’t find the Navigator icon on my Home screen. Remove the expansion card from the slot and reinsert it. Navigator starts automatically when you reinsert the card. Where can I get customer support if I need it? See the User Guide on the TomTom installation CD for detailed information about navigator features. If you still need help, refer to the support section of the TomTom website, www.tomtom.com. If you have problems with the GPS receiver hardware, refer to the Holux website: www.holux.com. Read This First Contents GPS receiver Car charger Charging cable Copyright © 2004 palmOne, Inc. All rights reserved. palmOne, the palmOne logo, Zire, the Zire logo, Tungsten, the Tungsten logo, HotSync, and Palm are among the trademarks or registered trademarks owned by or licensed to palmOne, Inc. palmOne, Inc. uses the Bluetooth wireless technology trademark under express license from Bluetooth SIG, Inc. All other brand and product names are or may be trademarks of, and are used to identify products or services of their respective owners. Disclaimer and Limitation of Liability palmOne, Inc. assumes no responsibility for any damage or loss resulting from the use of this guide. palmOne, Inc. assumes no responsibility for any loss or claims by third parties which may arise through use of this software. palmOne, Inc. assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, dead battery, or repairs. Be sure to make backup copies of all important data on other media to protect against data loss. IMPORTANT Please read the End User Software License Agreement with this product before using the accompanying software program(s). Using any part of the software indicates that you accept the terms of the End User Software License Agreement. Agency Compliance Information Product regulatory and compliance information can be found in the printed guide Taking Your First Trip with GPS Navigator by palmOne. Cable adapters Dashboard pad Cradle Cradle arm AC charger palmOne, Inc. 400 N. McCarthy Blvd. Milpitas, CA 95035 TomTom Navigator software and maps PN: 406-10133-00 GPS Navigator by palmOne