finishing tools

Transcription

finishing tools

SURFACING
& FINISHING
P R O D U C T
A N N U A L
115
$
G U I D E
2 0 1 2
VISIONIX
VM 2500 auto lensmeter for
FREEFORM lens processing
• Compare freeform lens to the lens designer’s map
• Real-time mapping measurements
• 1,000+ measure points
• Extremely precise
3 EASY STEPS:
• Upload reference lens
• Measure lens
• Compare design to actual lens
For more information turn to page 104
A Publication of
or contact Visionix at 678-456-1100
[email protected]
www.Visionix.com
SF_Briot_Cover_2012_.indd 1
10/11/11 11:32 AM
Marc Ferrara
PRESI DENT & PUBLI SHE R - FR A MES D ATA • Thomas Lamond
ASSOCI ATE PUBLI SHE R - FR A MES D ATA • Vincent Priore
VICE PRESIDENT/DIRECTOR OF OPERATIONS - FRAMES DATA • Judith Michael
PRESIDENT/ECP BUSINESS SERVICES DIVISION • William D. Scott
CEO, I NFORMATI ON SERV IC ES D IV ISIO N •
ADVERTISING
Dennis Murphy
James DeMatteis
REGIONAL SALES MANAGER • Amanda Churchill
VICE-PRESIDENT OF SALES •
SURFACING
& FINISHING
P R O D U C T
G U I D E
REGIONAL SALES MANAGER •
PRODUCTION/EDITORIAL
Marge Axelrad
Christie Walker
GROUP EDITOR/LENSES & TECHNOLOGY • Andy Karp
CORPORATE PRODUCTION DIRECTOR • John Caggiano
PRODUCTION MANAGER • Sheila Bergen
SENIOR VICE-PRESIDENT/EDITORIAL DIRECTOR •
EDITOR •
174G • 2011-2012
VOLUME XXXIX • NUMBER 24
TABLE OF CONTENTS
ELECTRONIC SERVICES
Luis Norberto
DATA & IMAGERY ADMINISTRATOR • Vanessa Telemaco
CLIENT SERVICES COORDINATOR • Amira Abdel
SENIOR TRAFFIC COORDINATOR • David Velez
TRAFFIC COORDINATOR • Kevon Thomas
TRAFFIC COORDINATOR • Raymond Mullins
DATABASE COORDINATOR • Ari Case
PHOTO STUDIO MANAGER • Noel Heberling
DIGITAL MEDIA COORDINATOR • Ken Lee
DIGITAL PHOTOGRAPHER • Annie Gallagher, Matt Lambros
SENIOR FRAMES LAYOUT MANAGER • Ryan L. Bouie
DEVELOPER • Hector Pacheco
CLIENT SERVICES MANAGER •
C R E AT I V E S E RV I C E S / C U S T O M P U B L I S H I N G
DIRECTOR OF SALES •
Lenor Fowler
MANUFACTURERS & DISTRIBUTORS GUIDE
2
PRODUCT SECTION
BENCHES, STORAGE & MISCELLANY
5
EDGERS
17
EDGER TOOLS & SUPPLIES
25
FINISHING TOOLS
37
FRAMES TRACERS
65
GENERATORS
67
LENS COATING
73
LENS DYEING
83
VICE PRESIDENT OF CREATIVE SERVICES & PRODUCTION
Monica Tettamanzi
Kristen Garger
GRAPHIC DESIGNER • Jincy Thomas
PRINT PRODUCTION COORDINATOR •
M A R K E T I N G / C I R C U L AT I O N
Thomas Doyle
Joshua Wasserman
ACCOUNT MANAGER • Erin Manna
DIRECTOR OF MARKETING AND CIRCULATION •
TECHNICAL MARKETING COORDINATOR •
Senior Vice President of Operations, Jeff Levitz
Vice President–Human Resources Director, Lorraine
Orlando
Vice President–Circulation Director, Emelda Barea
LENS INSPECTION & MEASURING
101
LENS TEMPERING
109
MARKERS, BLOCKERS & PATTERN MAKERS
111
SOFTWARE SYSTEMS
12
SURFACERS
121
SURFACING TOOLS & SUPPLIES
126
The advertiser, manufacturer or importer represents and warrants to Frames Data Inc.
(“Frames”) that it has the legal right to use all trade names and trademarks employed in
the advertisements or listings submitted to Frames and agrees to hold Frames harmless
from, and to indemnify Frames against any loss, cost, expense (including attorney fees) or
other liability arising out of a claim that the submitted advertising copy infringes any
copyright, trademark, trade name, or other proprietary interest of any third party.
This book is supported by advertisers. Frames Data Inc. may consider advertising status
in exercising editorial discretion to delete or refuse submitted material.
Frames makes every effort to report manufacturers’ news accurately, but the editors do
not assume responsibility for the validity of news claims. No part of this publication
may be reproduced without permission of the publisher. Acceptance and publication
of advertising and/or editorial does not imply endorsement of any product, service, or
company by Frames Data Inc.
SUBSCRIPTION INFORMATION: FRAMES Data Quarterly: March, June, September,
December; Monthly: Price Book; Annuals: Surfacing & Finishing, Review of Cornea &
Contact Lenses Annual Contact Lenses and Lens Care Guide, Diagnostic Instruments &
Equipment; Semi-Annual: Lenses.
Review of Cornea & Contact Lenses Annual Contact Lenses and Lens Care Guide,
Surfacing and Finishing Product Guide and Diagnostic Instruments and Equipment Product
Guide are available by request to subscribers. Call 800.739.7555 to add them to an
existing FRAMES Data Quarterly subscription.
SUBSCRIPTION RATES – A one-year subscription to FRAMES Data Quarterly (print or
CD-Rom) is US $438.95, Canada $543.95. All others $648.95. To subscribe please send
your order with payment to: FRAMES Data Quarterly, PO Box 2141, Skokie IL 60076-9787.
For faster service subscribe online at www.framesdata.com or call our customer service
department at 800-739-7555 (outside the US please call 847-763-9630)
Frames Data Inc., 100 Avenue of the Americas, 9th Floor, New York, NY 10013 Technical
and Product Information: 800-821-6069 Ext. 1 or Email: [email protected].
© Copyright 2011 by Frames Data Inc. All rights reserved.Reproduction, redistribution,
republication, rebroadcast, or other use is not allowed without express written permission
from the publisher.
Frames Data Inc. is a subsidiary of Jobson Medical Information LLC
001_SF1110_TOC.indd 1
10/12/11 10:46 AM
Manufacturers & Distributors Guide
A.I.T. Industries
Coburn Technologies, Inc.
224 West James Street
Bensenville, IL 60106
(800) 748-9521
Fax:
(601) 352-0290
Website:
www.aitindustries.com
Edger Tools & Supplies. . . . . . . . . . . . . . . . . . . . . . 25, 32, 33, 35, 36
Edgers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 18, 21, 22, 23
Finishing Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39, 44, 55, 57, 62
Frame Tracers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Lens Inspection & Measuring. . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Lens Tempering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Markers, Blockers & Pattern Makers . . . . . . . . . . . . . . 111, 115, 117
Software Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Surfacing Tools & Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Belrose Refracting Equipment Co., Inc.
3734 W. Oakton Street
Skokie, IL 60076-3444
Phone:
(847) 675-2300
(800) 875-5235
Fax:
(847) 675-2303
Email:
[email protected]
Website:
www.belroserefracting.com
Edger Tools & Supplies. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 32, 35
Edgers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 22, 23
Finishing Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40, 42, 45, 62
Lens Inspection & Measuring. . . . . . . . . . . . . . . . . . . . 100, 103, 106
Markers, Blockers & Pattern Makers . . . . . . . . . . . . . . . . . . 117, 118
Brain Power, Inc.
See our Ads on pg. 85, 93
See our Ad on pg. 3
55 Gerber Road
South Windsor, CT 06074-3244
Phone:
(860) 648-6600
(800) 843-1479
(800) 262-8761
Fax:
(860) 648-6601
Website:
www.coburntechnologies.com
Benches, Storage & Miscellany . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Edgers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 19
Finishing Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Frame Tracers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Generators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 69
Lens Coating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73, 76
Lens Dyeing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Lens Inspection & Measuring. . . . . . . . . . . . . . . . . . . . . . . . 100, 108
Markers, Blockers & Pattern Makers . . . . . . 111, 114, 115, 118, 119
Surfacers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121, 122, 123, 124
Surfacing Tools & Supplies 126, 127, 131, 132, 133, 134, 135, 136,
137, 139, 140, 143, 146, 147, 148, 149
DAC Vision
3630 W. Miller Road. Suite 350
Garland, TX 75041
Phone:
(800) 800-1550
(972) 677-2700
Fax:
(972) 677-2800
Website:
www.dacvision.com
Benches, Storage & Miscellany . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6
Edger Tools & Supplies. . . . . . . . . . . . . . . . . . . . . . . . . 25, 26, 32, 35
Finishing Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Generators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Lens Dyeing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 94
Markers, Blockers & Pattern Makers . . . . . . . . . . . . . . . . . . . . . . 118
138, 140, 141, 146, 149
Digital Vision, Inc.
4470 S.W. 74th Ave.
Miami, FL 33155
Phone:
(305) 264-4465
(800) 225-5274 800 CALL-BPI
Fax:
(800) 327-2250
See our Ad on pg. 13
(305) 264-1467
P.O. Box 82294
Portland, OR 97282
Phone:
(503) 231-6606
Fax:
(503) 231-4943
Website:
www.thedvi.com
Software Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 16
(888) 225-5274 888 CALL-BPI
Email:
[email protected]
Website:
www.callbpi.com
Benches, Storage & Miscellany . . . . . . . . . . . . . . . . . . . . . 5, 6, 8, 10
Edger Tools & Supplies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 31
Finishing Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40, 43, 62, 63
Lens Coating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Lens Dyeing . . . . . . . . . . . . 83, 84, 86, 88, 89, 92, 94, 96, 97, 98, 99
Lens Tempering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109, 110
Surfacing Tools & Supplies . . . . . . . . . . . . . 135, 136, 138, 142, 143
Briot USA
DigitalTrace™
See our Ad on pg. 19
Phone:
(877) 524-7265
Email:
[email protected]
Website:
www.DigitalTrace.net
Frame Tracers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Dynamic Labs, Inc.
See our Ads on
Front Cover, Edgers TAB and pg. 105, 107
5251 Shiloh Rd
Cumming, GA 30040
Phone:
(678) 456-1100
(800) 292-7468
Fax:
(770) 889-8445
Email:
[email protected]
Website:
www.briot-usa.com
See also Briot-WECO USA
Edgers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
175 Commerce Dr
Suite N
Hauppauge, NY 11788
Phone:
(631) 231-7474
(888) 339-6264 116
Fax:
(631) 231-7374
Website:
www.dynamiclabs.net
Benches, Storage & Miscellany . . . . . . . . . . . . . . . . . . . . . . . 6, 7, 10
Edger Tools & Supplies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Edgers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Finishing Tools . . . . . . . . . . . . . . . . . . . . . . . . . 37, 40, 42, 45, 55, 62
Lens Coating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Lens Dyeing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Surfacing Tools & Supplies . . . . . . . . . . . . . . . . . . . . . . . . . 128, 133
FrameTrace.com
Phone:
(877) 524-7265
Email:
[email protected]
Website:
www.FrameTrace.com
Frame Tracers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Grobet USA
750 Washington Ave.
Carlstadt, NJ 07072
Phone:
(201) 939-6700
(800) 847-4188 ext. 355
Fax:
(201) 939-3099
(800) 243-2432
Email:
[email protected]
Website:
www.VigorOptical.com
Benches, Storage & Miscellany . . . . . . . . . . . . . . . . . . 5, 6, 8, 10, 12
Finishing Tools 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 55, 56,
57, 58, 59, 60, 61, 62, 64
Lens Coating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Lens Dyeing . . . . . . . . . . . . . . . . . . . . . . . . . . . 83, 88, 92, 95, 96, 98
Lens Inspection & Measuring. . . . . . . . . . . . 100, 102, 103, 106, 108
Markers, Blockers & Pattern Makers . . . . . . . . . . 115, 117, 118, 119
Surfacing Tools & Supplies . . . . . . . . . . . . . . . . . 132, 135, 138, 142
Machine Host Translator™
Phone:
(877) 524-7265
Email:
[email protected]
Website:
www.MachTranslator.com
Edgers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ModShape™
Phone:
(877) 524-7265
Email:
[email protected]
Website:
www.Modshape.com
Frame Tracers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
National Optronics, Inc.
100 Avon St
Charlottesville, VA 22902
Phone:
(434) 295-9126
(800) 247-9796
Fax:
(434) 295-7799
Email:
[email protected]
Website:
www.nationaloptronics.com
Edgers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Frame Tracers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Generators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Optek
Associated Development Corp.
6825 38th St. N
Pinellas Park, FL 33781
Phone:
(727) 525-2153
(800) 524-5454
Fax:
(727) 526-7872
Email:
[email protected]
Website:
www.optek-online.com
Benches, Storage & Miscellany . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Edgers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Finishing Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Generators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Surfacers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122, 123, 124
141, 143, 146, 147
Optical Machinery, Inc.
9641 Wendell Road
Dallas, TX 75243
Phone:
(214) 342-1382
(800) 284-8078
Fax:
(214) 342-0187
Email:
[email protected]
Edgers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 22, 23
Finishing Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38, 39, 40, 44, 45
Generators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Lens Coating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Lens Dyeing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 98, 99
Lens Tempering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Markers, Blockers & Pattern Makers . . . . . . 112, 114, 115, 117, 119
2
002-016_SF1110_Benches.indd 2
10/12/11 11:58 AM
Surfacers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121, 123, 124
143, 144, 146, 147
Optical Works Corporation
7259 W. Border
Muskogee, OK USA 74401
Phone:
(918) 682-1806
(800) 688-1806
Fax:
(918) 683-9527
Email:
[email protected]
Website:
www.opticalworks.com
Benches, Storage & Miscellany . . . . . . . . . . . . . . . . . . . . . . 5, 10, 12
Edgers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 22, 24
Finishing Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41, 44
Generators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 69, 70, 71, 72
Lens Coating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Lens Dyeing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Lens Inspection & Measuring. . . . . . . . . . . . . . . . 100, 102, 104, 108
Lens Tempering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Markers, Blockers & Pattern Makers . 112, 113, 114, 116, 117, 118,
119, 120
Surfacers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121, 122, 123, 124
139, 140, 141, 144, 145, 146, 147, 148, 150
OptiSource International
40 Saw Grass Drive
Suite 1
Bellport, NY 11713 11776
Phone:
(800) 678-4768 OPTISOURCE
(631) 924-8360
Fax:
(631) 924-8375
Email:
[email protected]
[email protected]
Website:
www.1-800-OPTISOURCE.com
Benches, Storage & Miscellany . . . . . . . . . . . . . . . . . . . . . 5, 7, 10, 8
Edger Tools & Supplies. . . . . . . . . . . . . . . . . . . . . . 26, 27, 28, 31, 33
Edgers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 22, 23
Finishing Tools . . . . . . . . . . . . . . . . . . . 37, 38, 40, 41, 42, 44, 45, 63
Lens Coating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 77, 78
Lens Dyeing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 95, 96, 97
Lens Tempering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Markers, Blockers & Pattern Makers . . . . . . . . . . 114, 115, 116, 118
150
Precision Tool Technologies
Satisloh
309 NW 13 Avenue
N116 W18111 Morse Dr.
P.O. Box 56
Germantown, WI 53022
Little Falls, MN 56345
Phone:
Phone:
(262) 255-6001
Fax:
(262) 255-6001
(800) 866-5640
(320) 632-5320
(800) 450-8665
Email:
[email protected]
Website:
www.precisiontooltech.com
Benches, Storage & Miscellany . . . . . . . . . . . . . . . . . . . . . . . 5, 8, 12
Finishing Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38, 45
Generators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 71, 72
Lens Coating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Email:
[email protected]
Edgers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Generators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 72
Lens Coating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73, 74
Surfacers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122, 124
Surfacing Tools & Supplies . . . . . 130, 131, 136, 137, 147, 151, 152
SCHNEIDER Optical Machines Inc.
Surfacers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123, 124
Surfacing Tools & Supplies . . . . . 131, 132, 134, 135, 139, 141, 148
PSI (Practical Systems, Inc.)
11617 Prospect Rd.
Odessa, FL 33556
Phone:
Fax:
See our Ad on Back Cover
(727) 376-7900
(800) 237-8154
Schneider Optical Machines Inc.
(727) 372-1900
5916 Stone Creek, Suite #120
(800) 330-3800
The Colony, TX 75056
www.LookToPSI.com
Phone:
(972) 247-4000
Benches, Storage & Miscellany . . . . . . . . . . . . . . . . . . . . . . . . . 6, 12
Fax:
(972) 247-4060
Edger Tools & Supplies. . . . . . . . . . . . . . . . . . . 29, 31, 32, 33, 35, 36
Email:
[email protected]
Website:
Website:
Edgers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 23, 24
Finishing Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39, 41, 43, 44, 63
Sentilles/SOS/Shuron/CMV
Generators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 71
Lens Coating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73, 78
Lens Dyeing . . . . . . . . . . . . . . . . . . . . . . . . . . . 88, 91, 95, 96, 97, 99
www.schneider-om.com
For more Information of Sentilles products email: [email protected]
1313 Central Avenue
Charlotte, NC USA 28205-5009
Surfacers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123, 124, 125
Phone:
136, 137, 138, 139, 141, 142, 146, 147, 148, 150, 151, 152
Salem Vision Group
Optivision, Inc.
(704) 332-9928
(800) 868-9749 Orders
Fax:
(704) 332-9727
Email:
[email protected]
[email protected]
Website:
See our Ad on Inside Front Cover
See our Ads on pgs. 15, 69 & 129
2842 West Bethany Home Road
Phoenix, AZ 85017-1707
Phone:
(602) 277-2614
(800) 795-9927
Fax:
(480) 393-5678
Email:
[email protected]
[email protected]
Website:
www.optivision.com
Finishing Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Frame Tracers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Generators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 68, 71
Lens Coating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Software Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 13, 14, 16
Phantom Research Labs, Inc.
1957 Friendship Drive
Unit D
El Cajon, CA 92020
Phone:
(619) 449-7754
(800) 821-8729 Local
(800) 225-5559
Fax:
(619) 449-7711
Email:
[email protected]
Website:
www.phantomresearch.com
Finishing Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Lens Dyeing . . . . . . . . . . . . . . . 83, 86, 87, 88, 90, 91, 95, 96, 97, 99
Surfacing Tools & Supplies . . . . . . . . . . . . . . . . . . . . . 133, 135, 138
5901 Gun Club Rd.
Winston-Salem, NC 27103
Phone:
(336) 766-1104
(800) 234-1982
Fax:
(336) 766-1119
Email:
[email protected]
Website:
www.salemdist.com
www.SentillesOptical.com
See also Senasco Inc.
Edger Tools & Supplies. . . . . . . . . . . . . . . . 30, 31, 32, 33, 34, 35, 36
Edgers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 21, 22, 23, 24
Finishing Tools . . . . . . . . . . . . . . . . . . . . . . 38, 39, 41, 42, 43, 44, 64
Generators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 71, 72
Lens Coating. . . . . . . . . . . . . . . . . . . . . . . . . . . 74, 75, 78, 79, 80, 82
Lens Dyeing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88, 91, 92, 95, 99
Lens Tempering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109, 110
Markers, Blockers & Pattern Makers . . 113, 114, 116, 117, 118, 119
Surfacers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122, 124, 125
Surfacing Tools & Supplies . 131, 132, 137, 139, 142, 146, 148, 152
Signet Armorlite, Inc.
See also Salem Vision Group
Santinelli International
1001 Armorlite Drive
San Marcos, CA 92069
Phone:
(800) 759-0075
325 Oser Avenue
Fax:
(800) 759-0660
Hauppauge, NY 11788-3607
Email:
[email protected]
Phone:
(800) 644-3343 (EDGE)
Fax:
[email protected]
(631) 435-3343 (EDGE)
(631) 435-9200
Email:
[email protected]
Website:
www.santinelli.com
Website:
www.signetarmorlite.com
Superabrasive, Inc.
9411 Jackson Trail Rd
Hoschton, GA 30548
Edgers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 20, 22
Phone:
(706) 658-1122
Finishing Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39, 41, 42, 64
Fax:
(678) 714-6858
Frame Tracers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Website:
www.superabrasive.com
Edgers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Surfacing Tools & Supplies . . . . . . . . . . . . . . . . . . . . . . . . . 131, 137
Lens Dyeing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88, 99
4
10/12/11 11:58 AM
Visionix
Western Optical Supply
For Ad Pages See Briot
5251 Shiloh Rd
Cumming, GA 30040
Phone:
(678) 456-1100
(800) 292-7468
Fax:
(770) 889-8445
20 Arroyo Cuyamungue Road
Santa Fe, NM 87506
Phone:
(505) 455-1100
(800) 423-3294
Fax:
(505) 455-1109
Email:
[email protected]
Website:
www.westernoptical.com
Benches, Storage & Miscellany . . . . . . . . . . . . . . . . . . . . . . . . . 6, 10
Finishing Tools 37, 38, 40, 41, 42, 43, 48, 49, 50, 51, 52, 53, 54, 55,
57, 59, 60, 61, 62, 64
Lens Dyeing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88, 92, 96, 98
Lens Inspection & Measuring. . . . . . . . 100, 102, 103, 104, 106, 108
Cabinets
Job Trays
Lens and Lap Cabinet
Job Trays
OWC
BPI
5
cally use to keep trays and prescription infor- from its bottom nesting ridges.The Large Job
mation dry and clean. 12-1/4” x 7” x 1-7/8”.
Tray is available in eleven different
ECO14720
FAVORABLE colors: red, green, blue, yellow,
Contact DAC Vision for current pricing.
pink, orange, gray ,black,brown, ivory and
purple. Size: (7 x 12.25 x 3.5”). 24 trays per
Large Plastic Job Trays
case. 1 color per case.
DAC Vision
69-G9707
Contact OptiSource for current pricing.
Small Job Tray
OptiSource
Lens and Lap cabinet has sturdy double wall
steel construction. Five drawers at 4” and one
at 6”, each divided and fully extendable for
easy access. 32-1/4”h x 30”w x 27-3/4”d.
(82.0cm x 76.2cm x 70.5cm). 335lb. (152kg).
WLLC
Contact OWC for current pricing.
Instructional Aides
HOW TO DVDs with ELECTRIC
SOLDERING 63.1500EDVD
Vigor Optical
Durable, heavy-weight, multi-colored trays. Our job trays are larger (7” x 12” x 2”). The
Stackable, easy to store. Available in a range trays are subdivided into smaller compartof assorted colors.
ments for lenses, frames and tools. Virtually
81008 White
indestructable and easy to stack. Available in Small Job Trays are a simple and uniform way
Contact BPI for current pricing.
red, yellow, green, white, blue, pink, to organize your RX work. Small Job Trays are
self-nesting, offering a safe and uniform
AUTOMATION READY JOB TRAYS
purple,orange, black and brown.
stacking, with a label holder at each end for
Coburn
proper marking. The partitioned divider sepaSold in Cases of 22. Special Order.
rates lenses from frames, but is also removJob Trays
able. The Job Tray will not warp when used
Optical Machinery
with liquid solution. The Small Job Tray is
available in eleven different FAVORABLE colors: red, pink, purple, yellow, gray, blue, green,
orange, ivory, brown, and black. Size: (6 x 9 x
1.5”). 24 trays per case. 1 color per case.
69-G9705
Job Trays
Phantom
Gerber Coburn’s automation ready, stackable
job trays support both automated lens handling in surfacing and finishing.
Set of 5 instructional DVDs, including all the
frame adjusting DVDs and electric soldering
DVD, Combo set of gas soldering includes:
“Electric Soldering” 63.1512DVD 20 minutes.
“Simple & Basic Frame Repair” (32 min),
“Meathods & Means of ZYL Frame
Adjustment” (20 min), “ Methods & Means of
Metal Frame Adjustment” ( 20 Min), and
Frame Fitting for Comfort” ( 57 min). Available
individually also . . . . . . . . . . . . . $100.00 per set
1322301
Acublock/FreeBlock,, Yellow
1322400
Acublock/Vario Block,, Beige
1322401
Acublock/Vario Block,, Yellow
1322402
Acublock/Vario Block,, Light Blue
1322403
Acublock/Vario Block,, Light Green
1322404
Acublock/Vario Block,, Light Red
Contact Coburn for current pricing.
How To DVDs with gas Soldering
Job Trays
Vigor Optical
Coburn
Multi-purpose, durable, heavy-duty, stackable
job trays. Small, medium and large sizes. Nine
colors: Yellow, Gray, Brown, Red, Blue, Black,
Pink.
OM-JF-L Large Job Tray
OM-JF-S Small Job Tray
OM-JT-M Medium Job Tray
Contact Optical Machinery for current pricing.
Large Job Tray
OptiSource
Contact Phantom for current pricing.
Durable, resilient plastic with easy-to-adjust
partition for compartmentalizing. 6-1/4”w x
10-3/8”l x 1-1/4”d (15.9cm x 26.2cm x
28.6cm).
19892-00 Green
19893-00 Red
19894-00 Ivory
1989401 White
19895-00 Black
19896-00 Pink
19897-00 Blue
19899-00 Light Blue
Set of 5 instructional DVDs, including all the
frame adjusting DVDs and gas soldering DVD,
Combo set of gas soldering includes:
“Propane and Butane Soldering” 63.1511DVD
20 minutes. “Simple & Basic Frame Repair”
DAC Traymate™
(32 min), “Meathods & Means of ZYL Frame
Adjustment” (20 min), “ Methods & Means of
DAC Vision
Metal Frame Adjustment” ( 20 Min), and
Frame Fitting for Comfort” ( 57 min). Available Reusable and recyclable plastic job tray interindividually also . . . . . . . . . . . . . . . . . . . $100.00 liner. Replaces the plastic bags that labs typiFor ordering information, please see the Manufacturers and Distributors Guide.
Durable, removable partition, label holder with
labels included, and self nesting for uniform
stacking. Injection molded of high impact
syrene for durability and warp resistance.
Available in Red, Blue, Black, Pink, Green,
Ivory, Earth Brown, Grey and Yellow. Available
in small, medium and large.
Versi- Tray
Precision Tool
The Large Job Tray features a permanent,
dual partition, separating the left and right
lenses, and lenses from frames. A diagonal
ridge on the bottom of the lens compartments
assure EASY removal of lenses. These durable molded plastic Job Tray’s have a long life
with no warping and can accommodate any
size lens or frame without interfering with its
reliable stacking. It can also accommodate an
80 mm lens blank. The EASY, interlocking
capability with other types of trays, comes
New automated Job Tray, Based on European
Robotics but improved for the American labs.
Trays are made of your surfacing and finishing
requirements flip lip guards. Order in two
heights and various colors. VCA Conforming.
Contact Precision Tool for current pricing.
Prices subject to change without notice.
10/12/11 11:58 AM
6
Large Lab Trays
Job Trays
Vigor Optical
Click ‘n Stack Extra Deep Nesting
Trays
BPI® Mark Off Plus™
BPI
Western Optical
Job Trays
PSI
Hi-impact plastic trays in 8 popular colors.
Heavy-gauge oversize job trays designed to
hold and separate lens blanks up to 80mm in
diameter. Job trays are available in 8 colors
with a large tool and paperwork section.
Includes separate frame section as well. The
2”-high boxes have a molded stacking step
for secure handling.
These new trays interlock and can be used
Two fixed compartments. Label pockets on with conventional 6” x 9” trays. They are
one end. Self-stacking. Measures 7” x 12.5” 2-1/4” deep to accommodate wrap-around
2”. Each small compartment 89mm square. eyewear and eyeglass cases. The base of the
tray has indentations for capturing small
Packed x 24 single colors order by color: Red, parts. Western’s new Click ‘n Stack tray nests
Blue,Ivory,Yellow( not pictured), Green, Black, one inside the other because the sides are
Gray, and Purple . . . . . . . . . . . . $85.00 per case removed for shipping. The tray is easily
assembled by snapping the sides into place.
2114 Disposable Tray Tags
Boxed 20 trays per color.
Western Optical
2150
Available in five new contemporary colors:
Contact PSI for current pricing.
Yellow #2140/20
Quantity discounts available.
White #2142/20
Quickly remove the marks from a progressive
lens! The fiber tip incorporates a valve that
shuts off flow of the liquid when not in use.
Just press the tip to open the valve, when the
tip is moist, draw over the marks. Wait a few
seconds and wipe clean!
# 71027
The BPI® Economy Job Trays
BPI
Red #2144/20
Satisloh Combi-Tray
Green #2146/20
Satisloh
Blue #2148/20 . . . . . . . . . . . . $59.00 /case of 20
Labels
Labels
500 white card stock tags. Use twice and
DAC Vision
discard. 3-1/4”w x 1”h.
These are slightly smaller and lighter than the
2114 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $22.00
A combination job tray for both surface and
Job Trays above. They have a clear, remov-
2115 Reusable Tray Tags
finish automation. This specially configured
able divider and are available in five colors.
Western Optical
tray holds Satisloh surface blocking chucks,
Height: 1.5” (3.8 cm)
finish-blocked lenses, as well as loose lenses.
left to right: 6” (15.2 cm)
Because it’s a single tray with dual functionality, it reduces costs and eases handling and is
front to back: 9” (22.8 cm)
compatible with all Satisloh handling systems.
# 81015 White
Job tray labels are color coded with remov- Contact BPI for current pricing.
Slide some organization onto your shop trays able adhesive backing to help organize lab
and feature a built-in a chip holder at tray end
production work. Day, time, lens type, lens
Compression Bushings
with these plastic name slips. 100 reusable
treatment and action required labels. Labels
for special instruction and easier tray location.
white plastic cards with erasable marking pen. are 1 _” x 1” (250 labels per roll)
Dynamic Labs, Inc.
Specs: 260 x 220 x 70 mm (l x w x h).
3-1/4”w x 1”h.
Contact DAC Vision or DAC Edge for current
These trays are available in multiple colors
Contact Satisloh for current pricing.
Job Trays
2115 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $22.00
pricing.
2116/12 Plastic Stackable Shop Trays
Vigor Optical
Western Optical
Miscellaneous
BPI® ID Tech™
BPI
Dynamic Labs is a leading supplier of compression bushings to wholesale labs that do
not have access to these parts through the
frame companies. We offer bushings that
An easy way to organize your work. Self-
work with Sillouette, Marchon, Kowasaki, and
nesting for uniform stacking. Includes removable partition. Eleven Colora Sold in case of
24.
Measures 6” x 9” x 11_2”.
other frame manufacturers.
Contact Dynamic Labs, Inc. for current pricing.
Extra sturdy laboratory/dispensing trays in six
colors. Stacked trays interlock for secure
Dynamic Marking Remover Pen
Shop Tray-Burgundyx24
transporting. Large tray tag slot for easy refer- For Lens Inspection and Progressive Lens
ence. Trays packaged 12 or 24 per single Mark Identification System. It is small, light
weight and uses very little electrical power.
color case. Specs: 6-1/8”w x 1-5/8”h x # 18301 110v
Shop Tray Yellow x24
2116/12 per case, Yellow . . . . . . . . . . . . . . . . . . $30.00
Shop Tray White x24
2116/24 per case, Yellow . . . . . . . . . . . . . . . . . . $59.00
BPI® Lens Displays
2118/12 per case, White . . . . . . . . . . . . . . . . . . . $30.00
BPI
Shop Tray-Purple x24
9-1/8”d.
Shop Tray Red x24
2118/24 per case, White . . . . . . . . . . . . . . . . . . . $59.00
Shop Tray Green x24
2119/12 per case, Black . . . . . . . . . . . . . . . . . . . $30.00
Shop Tray Blue x24
Shop Tray Ivory x24
Shop Tray Brown x24
Shop Tray Gray x24
Shop Tray Black x24 . . . . . . . . $47.75 per case
2119/24 per case, Black . . . . . . . . . . . . . . . . . . . $59.00
2120/12 per case, Red . . . . . . . . . . . . . . . . . . . . $30.00
2120/24 per case, Red . . . . . . . . . . . . . . . . . . . . $59.00
2122/12 per case, Green. . . . . . . . . . . . . . . . . . . $30.00
2122/24 per case, Green. . . . . . . . . . . . . . . . . . . $59.00
2124/12 per case, Blue . . . . . . . . . . . . . . . . . . . . $30.00
2124/24 per case, Blue . . . . . . . . . . . . . . . . . . . . $59.00
Contact Vigor Optical for current pricing.
For ordering information, please see the Manufacturers and Distributors Guide.
Dynamic Labs, Inc.
# 218301 220v
BPI® Designer Lens Displays are fabricated
from durable, lightweight aluminum finished
with a fused white nylon finish or injection
molded plastic. They attractively display the
tint of the lens for your patients. They can be
used with lenses up to 71 mm in diameter.
Available with or without lenses. They ship
with lens rings. Additional lens rings are available in packs of 25.
# 13900 Designer pallet 8
Easily removes factory progressive layout
guide markings. Also great at safely removing
markings from polycarbonates. This pen has a
specially designed cap making it last for a
very long time. . . $24.95 bulk pricing also available
10/12/11 11:58 AM
Miscellaneous
7
Deluxe Digital Pupilometer
Handheld Digital Pupilometer
Quart Lid
OptiSource
OptiSource
OptiSource
This fully digital handheld Pupilometer is Easy
and Simple to use.Its battery powered operation allows it to be used anywhere.This classic
design includes all of today’s technology to
make it our Best pupilometer ever. The new
Clibration Reference Marks allows for recalibration if the unit is dropped or mishandled to
ensure precise measurements, Thedurable
finish will not chip or fade and is washable.
The adjustable LED light source makes reading easy and allow for extra-long battery life.
The fully packaged weight is 2 pounds.
This fully digital handheld Pupilometer is
EASY and SIMPLE to use. Its battery powered
operation allows it to be used anywhere. It has
a push button automatic slide measurement
for the left and right eye. This Pupilometer unit
also has a single eye isolator feature and a
memory of previous trials. The fully packaged
weight is 1.5 pounds.
Never reorder Tint Pan Lids again! New,
heavy-duty stainless steel construction will
never pit or corrode. These lids come with a
heat-resistant knob for your safety and it’s
Quart-Size Tint Pans are great for adding
more dye color variety to your existing tint
system. *Pan is not included with order. To
place an order for the Tint Pan Lid, use product code 99-HDTPL.
Purity Lens Clearner™
Dynamic Labs, Inc.
The industry’s most popular lens cleaner. This
unique lens cleaner is non-streaking, safe on
AR lenses and even removes hair spray!
Available in several sizes and kits with free
imprinting for your customers. Gallons are not
imprintable.
Purity Microfiber Cloths
Dynamic Labs, Inc.
32-PDMETERSTND
Pina Colada Fragrance
OptiSource
32-PDMETERDLUX
99-HDL
Quart Pan
OptiSource
Folding Book Display
OptiSource
Purity microfiber cleaning cloths come in
assorted colors and are available either individually packaged in a plastic pouch or in a
dispensing box. The cloths offer superior
cleaning ability and are 100% safe on any lens
or coating. Custom imprinting is available. Ask
about getting your interactive QR code included in your printing.
Do you dislike the odors associated with your
lab chemicals? Instead, how would you like
smelling a tropical paradise? Our Lab Fresh
Pina Colada scented solution will mask the
worst chemicals smells with its fresh, light
aroma. Lab Fresh Pina Colada scented solution comes in an 8 oz., biodegradable solution
bottle specifically engineered to neutralize
your primary OPTICAL chemical odors. Buy
some today, and start livin’ it up!
18-Spot Folding Book Style Lens Display,
contains 18 of your favorite and most popular
tinted or coated lenses on a black with white
striped background, for EASY viewing. *Ask
about a FREE Lens Tower Display with pur99-PCF
chase of tints.
99-OSLDB
117 Alloy
GOLF SPORTS CLIP SILVER/ RED
OptiSource
OptiSource
Never reorder Tint Pans again! New, heavyduty stainless steel construction will never pit
or corrode. Quart-Size Tint Pans are great for
adding more dye color variety to your existing
tint system. *Lid is not included with order. To
place an order for the Tint Pan Lid, use product code 99-HDL.
99-HDTP
Optivision® Time & Attendance
System™
Optivision®
Pint Lid
OptiSource
Patented Visor Clip Holds EyeWear, Matching
Pen and Notes!
Never sit on, lose or damage your eyewear in
your car again. Our Patented Visor Clips
mount to any automobile visor and securely
hold your eyewear or sunglasses. These clips
are fun, fashionable and popluar. Plus, we
have a huge variety of shapes, colors, finishes
Alloy 117° is available for firm blocking plastic and styles.
lenses. Alloy works in all blocking machines. It *Patented high quality clips
is a PREMIUM GRADE and is reusable. Alloy
117° comes as a 1 lb bar. *Alloy 136° for *Use on car visors, purses, carry bags and
more
higher- temperature blocking is also available
*Huge variety of shapes, colors, finishes and
(product code: 23-A136BP)
styles
23-A117-1LB
Blue Blocking Wax
Green Blocking Wax
OptiSource
OptiSource
Never reorder Tint Pan Lids again! New,
heavy-duty stainless steel construction will
never pit or corrode. These lids come with a
heat-resistant knob for your safety and it’s
Pint-Size Tint Pans are great for adding more
dye color variety to your existing tint system.
*Pan is not included with order. To place an
order for the Tint Pan Lid, use product code
99-HDTPM.
99-HDLM
Pint Pan
OptiSource
Our new PREMIUM blocking wax melts with
ease, like liquid, and it is less brittle than the
leading brands. The Blocking Wax releases
from block as a solid piece. Reuse it over and
over again. Comes in an 8 lb. box measuring 1
gallon.
Our new PREMIUM blocking wax melts with
ease, like liquid, and it is less brittle than the
leading brands. The Blocking Wax releases
from block as a solid piece. Reuse it over and
over again. Comes in an 8 lb. box measuring 1
gallon.
Our almost famous Pint-Size Tint Pans are
designed so that two pint pans fit in the same
spot as one typical quart size pan. Pint-Size
Tint Pans are great for adding more dye color
variety to your existing tint system. Tint Pans
are constructed of Heavy-Duty stainless steel
and will never pit or corrode. *Lid is not
included. To place an order for the Tint Pan
Lid, use product code 99-HDLM.
04-WAXBL
04-WAXGR
99-HDTPM
Used in conjunction with the Optivision®
Laboratory Management System™, the
Optivision®
Time
and
Attendance
Management solution is integrated into the
Optivision©
Laboratory
Management
System™ Machinery Interface. This will automate the process of employee labor tracking
and time management. No more endless
hours spent figuring and adding up employee
time card entries! Employees clock-in and out
directly from the card reader, eliminating the
need to maintain cumbersome, punch card
systems. In the payroll office, hours are easily
viewed and adjusted where necessary and
streamlines the routine tasks associated with
payroll management. Employees clock in and
out using a card that holds a magnetic stripe,
similar to a credit card. Going paperless gives
you immediate access to important time card
information. The paper is gone so data can
now be extracted for use in generating other
kinds of information that depend on the time
card data such as payroll ledger entries and
invoices. The electronic solution delivers
ease-of-use and greater control over office
information.
Now there is no reason to use an outdated
mechanical device:
•Reduce costs: Eliminate the need for
unwieldy, high-maintenance punch-card systems
•Determine at-a-glance who is clocked in, at
what time and in which department
•Increase awareness: User maintenance controls help you gain complete control
10/12/11 11:59 AM
8
•Assign employees to salary departments for
tracking and reporting
Lfu 220 Hybrid Filter
Santinelli
•Improve productivity: Reduce payroll preparation time and increase accuracy
clasps on each end. Available in 14 vibrant
colors. Sold by the dozen. . . . . . . . . . $1.99 dz
Small Parts Holder
•Computerized calculation of hours ensures
precise payroll processing
BPI® Lens Displays
BPI
•Summary
and
detailed
reporting:
Departments, date ranges, employee status &
type
•Payroll staff has instant access to the inforWith environmental concerns in mind,
mation needed
Santinelli International introduces the newly
developed Lfu 220, a tank and pump hybrid
•Your lab runs smoother!
system with centrifugal filtration technology,
This is by far the easiest way to track and which drastically decreases water consump# 13900 Designer pallet 8
report employee hours. Magnetic card reader tion.
The system essentially separates lens waste
from water, maintaining clean water circulation while significantly lowering water consumption. After processing approximately
130-160 lenses, the waste is filtered and compacted into a single solid mass which can be
Find more about Optivision® products, our
disposed of easily, keeping the surroundings
team and contact information at www.optivi- and operator’s hands clean.
sion.com or call 800.795.9927 now!
The filtration process eliminates lens scratching while keeping the lens edger grinding
Precision Specialty Machining
chamber clean. In addition, with the new techService
nology the unit’s water only needs to be
replaced every 1,000 lens cycles. The amount
Precision Tool
of water consumption per lens with the Lfu
220 is estimated to be .025 liters versus 13.5
We are a full-service specialty and prototype liters with direct water.
machine shop. We can handle all of your speWhile the edger is processing lenses, the Lfu
cialty needs from manufacturing one-of-a- 220’s water flow minimizes splashing, elimikind parts which are no longer available to nating foaming, and maintains a lower water
making all forms of adaptor, fixturing and temperature. The decreased temperature
clamping equipment. We offer rush service, if maintains the high-quality polish, and
because there is no longer foaming, you need
needed, for any project.
not add a chemical defoamer to the tank.
with keypad enables the user to add enhanced
functionality to any standard computer. It connects easily to your existing PC using a serial
or keyboard wedge interface.
3M1640
OptiSource
Contact Lens Dispensing Tray
Ultra-Sonic Basket
Vigor Optical
Precision Tool
Lens Envelopes
Vigor Optical
Frame Envelopes
61.114/EV-148 5-1/2” x 3-1/8” Coin Size #5-1/2, Ship
wt. 2lb. 8oz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $31.50
61.115/EV-130 6” x 3-1/2” Coin Size #6, Ship wt. 3lb. .
$37.00
3M Surface saver II Tape offers the longest roll
of tape available for fewer change-outs. This
HIGH-QUALITY tape offers SUPERIOR
scratch protection during surfacing. It also
makes for VERY EASY blocking. 3M Surface
saver II Tape offers two blocking levels: High
and Medium. This product serves for your
“High” temperature alloy blocking, while the
“Medium” temperature alloy blocking is available as well for ordering (product code:
08-3M1640). Each Tape level conforms to all
types of lens styles and base curves. 3M
Surface saver II preserves progressive markings for accurate alignment, processing,
inspection and curves. This is a non-messy
release paper, making for a clean tape removal. Size: (4” x 36 yards).
08-3M1640
3M1641
OptiSource
Vigor®-Lok Plastic Bags
Perfect for frame or Rx storage. Made of polyvinyl material. Press the strip together to lock,
pull to open. Order by box.
61.124/EV-188 4” x 4”. For up to 80mm lenses. 1,000
per box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $49.00
Stools
Workbench Stool
Vigor Optical
Each ultra sonic basket holds 10 lenses. The
lenses are held by spring tension against nonscratching delrin bar for a sure, safe hold.
Replacement springs also available. Fits USC
120 and other similar cleaning system.
LED 200 Deodorizer
Santinelli
3M Surface saver II Tape offers the longest roll
of tape available for fewer change-outs. This
HIGH-QUALITY tape offers SUPERIOR
scratch protection during surfacing. It also
makes for VERY EASY blocking. 3M Surface
saver II Tape offers two blocking levels: High
and Medium. This product serves for your
Dispensing tray for contact lens in clear
“High” temperature alloy blocking as well as
acrylic with “L”and “R” marked lens wells.
your “Medium” temperature blocking. Each
Complete with cover and small PVC tipped
Tape level conforms to all types of lens styles
plastic 58mm tweezers. 84mm x 58mm. $6.00
and base curves. 3M Surface saver II preFull-size casters provide great mobility at your
Marking Die for Safety Lenses and
workbench. Adjustable, large diameter vinyl serves progressive markings for accurate
Temples
seat is well-padded for all day comfort. Height alignment, processing, inspection and curves.
This is a non-messy release paper, making for
Vigor Optical
adjustable from 181/2” to 25”.
13.063. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $280.00 a clean tape removal. Size: (4” x 36 yards).
A quick and clean way to mark all plastic or
08-3M1641
polycarbonate lenses and temples. Custom Tape
crafted die fits your staking set (44.100) and is
Ceri-Guard 600 Linerless
designed to be used with a nylon anvil
3M Clear Surface Tape
(44.138). For use with a high base curved lens,
OptiSource
order an extra anvil and custom grind the
OptiSource
base curve. Letters are 1_16” high.
To ensure accuracy, all orders must be faxed
or mailed to us. Call for price on logos.
44.153
44.153 – Custom Etched 1-3 Block Letters . . . . . . . $
Custom Etched 1-3 Block Letters. . . . . . . . . . $100.00
Nylon Eyeglass Cords
Santinelli International’s new LED-200 effectively removes odorous gases during the lens
edging process, creating a safer and more
pleasant lab environment. The unit connects
to any edger and is extremely user friendly.
The activated charcoal filter is easily replaced.
Other features include:
Vigor Optical
3M Clear Surface Tape is a linerless tape that
can be used when surfacing all types of lenses, including Polycarbonate, high-index, and
glass. While protecting against scratches, 3M
Surface Tape also keeps the lens surface free
of contamination. 3M Surface Tape shields the
lens from wax, oil and other contaminants that
interfere with the uniformity and adhesion of
surface coatings. Size: (4” x 72 yards).
• Auto ON / OFF
• Built-in vacuum
08-3M1663
• Delayed timer
Standard 24”length cords with O-ring style Contact OptiSource for current pricing.
This premium linerless surface tape is specially formulated to give extra heat reflection
and surface protection while conforming to all
lens surfaces including deep curvers, lentics
and executives. It is recommended for CR-39
and Hi-Index lenses with an alloy temperature
of 117°F. In addition, it has the added benefit
of having no paper liner to roll up
99-SSTLINERLESS
10/12/11 11:59 AM
Hungry for success?
At Jobson, we have more effective ways for you to reach the optical market than anyone. So our approach
to serving clients is unique. First, we develop a thorough understanding of your specific goals. This understanding,
plus our extensive offering of products and services, enables us to then suggest solutions that will help achieve
those goals. This often includes innovative ideas and premium positions. For advertising information contact
Dennis Murphy, VP Sales, 212-274-7101 or [email protected]. Let us satisfy your hunger for success.
Continuing Business Education Center
Re v i e w o f O p t o m e t r i c B u s i n e s s
C O N T I N U I N G B U S I N E S S E D U C AT I O N C E N T E R
The vision to help you succeed
CONTINUING
B U S I N E S S E D U C AT I O N
CENTER
Jobson_Corporate_SurfFin_1011.indd 1
10/7/11 12:39 PM
10
Tape
Tool Holder
2176 Acrylic Tool and Screw Rack
Thirty Place Screw Caddy
Vigor Optical
Western Optical
Western Optical
Clear Surface Tape
OptiSource
Organize your repair area with our beautiful
Durable clear acrylic holder is designed to and functional countertop rack in clear acrylic.
keep all of your tools organized, accessible Holds pliers, drivers, files, rules, lens clock
and protected. With five vertical pockets, a and eight vials of screws, blades, etc. Tools
OptiSource Clear Surface Tape protects front
not included. Specs: 11”w x 6”h x 6”d
side of lens from scratching and heat during twelve hole shelf, and an angled pliers rack. 2176 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $55.00
surfacing. Ideal for newer wax products. Can stand on bench or hang from wall.
2178 Magnetic Tool Bar
OptiSource Clear Surface Tape removes Measures 5”h x 12”w x 7-3/4”d.
Western Optical
EASILY and cleanly. It is economically priced 13.379. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $90.00
to protect your expensive lens investment. Reduced Price!
Clear color makes marks VERY EASY to read
Wooden Pliers and Screwdriver Rack
and inspect. Size: (4” x 36 yards).
51-SSTC
Great way to organize and control costly
inventory of screws and findings. Tilted rack
plus inventorty sheet makes it easy to locate
screws. Made of attractive clear acrylic. Vials
not included.
2200 13”w x 2-1/2”h x 5”d . . . . . . . . . . . . . . . . . $15.00
Tool Racks
The BPI® Economy Job Trays
BPI
Vigor Optical
OptiSource Surface Tape
OptiSource
Free up valuable counter space by utilizing
western’s stylish white and silver tool bar.
Magnetic grip takes strong hold of tools.
Mounting screws provided. Specs: 12” Long
Features a 7 1/2_ center area for easy accessibility to all your favorite pliers. Round
depressions on side trays hold screws, nosepads or other small parts. Has 10 holes for
OptiSource Surface Tape protects the front
side of the lens from scratching and heat during surfacing. It’s an economical alternative to
more expensive 3M products. Transparent
blue tape makes marks VERY EASY to read.
Multi-use white release paper fits into all surface tape applicators. Size: (4”x36 yards).
51-SST
2184 Tool Magnetizing Tower
Western Optical
These are slightly smaller and lighter than the
Job Trays above. They have a clear, removable divider and are available in five colors.
Height: 1.5” (3.8 cm)
left to right: 6” (15.2 cm)
screwdrivers and 9 additional holes for extra
front to back: 9” (22.8 cm)
blades or bits. Nicely finished in a clear lac-
# 81015 White
quered pine. Measures 12 1/2_ x 4 1/2_ x 4
5/16_. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $14.00
Lap Cabinet
2172 Canvas Tool Pouch
Optek
Western Optical
Tool Holders
Stainless Steel Plier Stand
Dynamic Labs, Inc.
A compact case designed to comfortably hold
six pliers and plenty of drivers and small parts.
Made of sturdy canvas with a hand carrying
strap. Measures approximately 13 _” x 12”
when open and only 12” x 3 _” when rolled
closed.
Professional Heavy Duty Tool Holder stands 2172 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.00
up to maximum usage. . . . . . . . . . . . . . . $49.95
2174 Dispensing Tool Case
Small Tool Case
2178 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.00
Tools not included.
Western Optical
Vigor Optical
Totally Cool! Re-charge Your Tool! For years
you have requested magnetized driver blades
and plier tips. The roadblock has been the
type of steel used cannot keep a magnetic
charge for the life of the tool. Now, with
Western’s Tool Magnetizing Tower, your hand
tools receive a continuous magnetic charge
Our modular lap storage cabinets provide
when inserted into this tool holder.
high-density storage with maximum capacity,
The TMT is an easy and efficient way to mag- organization, and access. With all-steel, weldnetize drivers, tweezers, chain nose pliers, ed construction, built-in locking system, and
even the Universal Screw and Nut Grabber baked enamel finish, this cabinet will provide
#5070 to pick up small screws and findings many years of trouble-free use. Features
that can be attracted to a magnet.
include: small 28.5” square footprint conserves expensive floor space; one-drawer-atThe Tool Magnetizing Tower holds 12 tools
a-time feature prevents accidental tipping for
(not included). Measures 2” h x 3” diameter.
increased safety; high quality, all-steel conAnother amazing exclusive from Western
struction; holds up to 900 lap tools in 9 dividOptical Supply.
ed drawers; accomodates laps up to 3.5” in
2184 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $59.00
diameter. 59.5”h x 28.5”w x 28.5”D, 614lbs.
Driver Caddy
Western Optical
Contact Optek for current pricing.
Dual Lap Rack
OWC
Easily holds twelve pliers, lens clock, files and
Compact Black leatherette case holds pliers
and small adjusting tools. Measures 1-1/2”h x
6”w x 8-3/4”l when closed and will hold up to
5 pliers, screwdriver, PD stick, files, and 4
screw vials. Ideal for small student kits. Ship
wt. 8oz.
five drivers. Uses velcro strips to hold pliers in
2174 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $40.00
Compact frame repair station. Holds drivers,
tweezers and files. Rubber pad protects eye- Stores up to 1,280 of the 3-1/4” rounds laps.
wear. White and colored acrylic. Tools not Single available. Single lap rack stores 640
included. Specs: 6-3/4”w x 3-1/4”h x 6-1/2”d laps. WDLR Dual Lap Rack.
15.155. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $22.00
Tools not included.
2180 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $15.00
place. Features lens clock, file and driver
pouches. Convenient carrying handle. Specs:
21-3/4”w x 12”L open
10/12/11 11:59 AM
Your premier online source
for optimizing practice growth…
just got EASIER to use!
NEW design, NEW features
· More reader friendly—so you can find info quickly!
· New practice-building content weekly
· Interactive polls to measure your practice against others
· New comment boxes to jump into online dialogues with colleagues
· Social media links to help you share and receive stories and ideas
· Hundreds of archived articles on how to grow your practice—
organized to help you capture opportunities
Join nearly 10,000 registered readers today at ReviewOB.com!
Platinum
Gold
ROB_new_FP_SF_1011.indd 1
Silver
10/7/11 12:39 PM
12
Tool Racks
Single Lap Rack
Precision Lap Tool Framed Rack
3100B Lap Rack
Storage System
PSI
Column Lap Rack.
Magnetic Tool Holders
Precision Tool
Vigor Optical
OWC
Maintain lap inventory in an easily accessible,
convenient storage space. Rigid, extra-stable
Single drum rack with 320 slots will accom- tubular steel frame. Standard tool rack has 20
modate 640 tools. 72”h x 24”w x 24”d (183cm individually rotating shelves made of cabinetx 61cm x 61cm), 360lb (164kg). WSLR Single grade MDF mounted on heavy-duty brackets
and industrial-grade roller bearings. Optional
Lap Rack.
earthquake-resistant mounting brackets available. Shipped completely assembled. This
W1101RB Dual Lap Rack
rack is engineered to allow maximum storage
OWC
space without stacking lap tools (the single
greatest cause of lap tool wear). Shelves are
slotted so each tool has a unique address. For
quicker positioning and retrieval, slots can be
indivdually tagged for a minimal charge. To
maximize capacity, every other slot is doubled
to hold duplicates. We can fabricate custom
racking and shelf systems per your needs.
A dual turntable type rack with 640 slots for
up to 1,280 tools, or larger spaces for 420
slots on each turntable for a total of 840 large
laps. W-45” (114cm), D-24” (61cm), H-72”
(193cm), weight 700lbs (317kg).
36” dia.
520 to 780 pcs. 3-1/2”
600 to 900 pcs. 3”
600 to 900 pcs. 3-1/4”
48” dia.
720 to 1080 pcs. 3-1/2”
800 to 1200 pcs. 3-1/4”
840 to 1260 pcs. 3”
This single column lap rack will store up to
560 3.5” round laps in individual spaces to
reduce damage to laps from stacking. This lap
rack is manufactured from the highest grade
birch hardwood plywood available and then
sprayed with a durable polyurethane finish
that will last for years. Has 35 shelves with 16
slots each and is 24” diameter with an overall
height of 6 feet.
3100B
Strong magnetic holders can be attached to
bench or wall. Holds even heavy metal tools
firmly within easy reach. MAGNABAR-Hard
wood and metal.
13.380 12”, 14oz.. . . . . . . . . . . . . . . . . . . . . . . . . $34.50
13.381 18”, 1lb. 4oz. . . . . . . . . . . . . . . . . . . . . . . $48.00
Reduced Price!
Wooden Tool Rack with Drawer
Vigor Optical
Rotary Lap Rack
PSI
Designed primarily to conserve storage space
and maintain the lap inventory in a readily
accessible area. Newly redesigned to hold
laps up to 3-1/2” in diameter. Moves freely on
its ball-bearing swivel base. Holds up to 860
laps with 289 openings. 6’ tall and constructed of first-grade birch plywood. 3100A Single
Provides storage slots for seven pliers, a shelf
for miscellaneous tools and a handy storage
drawer for small parts. Natural finish with
varnish. 6-1/2” x 7- 1/2” x 5”.
13.376. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $24.00
Reduced Price!
SOFTWARE SYSTEMS
AR Coating Lab
Optivision® AR Order Entry™
Optivision®
Calculation Software
Optivision® OptiCalc™ Rx
Calculation & Machine Interface
System
Optivision®
Interface component, which allows machines
from different manufacturers to interact with
each other throughout lens processing.
Imagine tracing a frame on one brand of tracing equipment, surfacing on another brand of
generator and edging it on yet a third different
brand of edging equipment. Your lab now has
the complete freedom to choose, mix and
match any lab equipment you want without
ever worrying about manufacturer machine
compatibility.
Innovations Lite Lab Software
Coburn
Innovations Lite is an entry-level version of the
powerful Innovations Lab Management
Software. Intended for progressive, lower volume labs that require superior lens calculations, simple data entry, and a minimum of
support, Innovations Lite is self-installable
and easy-to-use.
Optivision® OptiCalc™ Lab Software can help Contact Coburn for current pricing.
your lab save time and labor to generate more
Innovations© Lab Software
income!
Coburn
The Optivision® AR Order Entry™ program is Optivision’s powerful lab software promotes
accurate job entry & automated lens processa simplified, scaled-down version of the full ing for wholesale or retail surfacing, finishing
& AR labs of any size.
Optivision®
Laboratory
Management
The Windows®-based Optivision® OptiCalc™
System™ lab system with a customized front Lab Software system is designed to provide
precise surfacing calculations, machine interend to accommodate anti-reflective coating facing & lens manufacturing.
labs, suited to be comprehensive and afford- The Optivision® lens grinding specifications
are derived from mathematical, trigonometric,
able, to enter data, print envelopes with bar- algebraic, plane geometry and physics calculations on each and every lens, not from some
codes, invoice and maintain jobs that pertain “grinding chart”. These original calculations
make Optivision® Lab Software the most
to anti-reflective coating job processing.
accurate system in the industry.
team and contact information at www.optiviThe first software solution that integrates the
process of lens manufacturing with the business of lens manufacturing. Innovations is a
Lab Management Systems
Windows® 95-based software product that
provides ease of use along with the power
Innovations Edge
and functionality of the popular operating
Coburn
system. Innovations is characterized by a
series of sophisticated modules including
Designed to meet the needs of in-office finishorder processing, inventory management, job
ing labs, Innovations Edge is the newest
remote software from Coburn. Housed in a tracking and report generation, that can be
central finishing lab, Edge receives electronic configured to meet individual customer
data from satellite offices for real time job needs. Operator interface includes drop-down
processing. Edge is the perfect entry-level menus, auto-correction of entries and multiprogram for seamless transmission of patient tasking capabilities. Innovations is available in
prescription and digitized frame data, while customized configurations including Basic
providing the foundation for future software and Standard. Hardware includes Pentium
upgrades, such as in office surfacing.
computer with monitor, optional laser printers
245749 Innovations hardware and software package
and bar code readers. 110V.
245809 Innovations software only
Reduction of spoilage is very important to
keeping your profits high - OptiCalc™ mainteam and contact information at www.optivi- tains accuracy throughout the system. Results
from the Rx calcs are provided on a Shop
Ticket. OptiCalc™ incorporates the Machinery Contact Coburn for current pricing.
10/12/11 11:59 AM
SOFTWARE SYSTEMS
LensMate Lab
Lab Management Systems
Optek
DVI/RxWizard
Digital Vision
A modular, stand-alone system utilizing PC
hardware, bar code labels and scanner stations to track jobs from start to finish. TRACE
will speed customer service, expedite production, and create statistical analysis of production. The TRACE software is designed specifically for the needs of the optical lab and produces management reports summarizing
production activity, late and promised work.
TRACE enables the lab to increase usable,
current information and reduce non-productive hours searching for jobs. TRACE is
expandable and can be interfaced with DVI/
VISION or other systems.
Contact Digital Vision for current pricing.
DVI/VISION
Digital Vision
VISION is a complete system from Rx to
invoicing: state-of-the-art ophthalmic software with big computer power. “E-commerce”
ready with DVIRx.com Internet capability. The
RxWizard™ is DVI’s patented system for
Eyecare Professionals. Modular system utilizes PC hardware with networking capabilities.
By defining the laboratory’s preferences, tooling methods, etc., the system is able to produce custom work tickets that match the
needs of the individual laboratory. Software
includes Rx Processing, Finishing and SemiFinished Lens selection, Frame/Lens Data
Management, Bar-Coded Lens Inventory,
Work-in-Process, Breakage Management,
Job Costing, Invoicing, Accounts Receivable,
Sales Analysis, RxWizard™ with Internet/WEB
transmission to lab, TRACE (bar-coded tray
tracking), Point-of-Purchase, and interfacing
to frame tracers, edgers and generators.
LensMate Lab is a suite of applications that
leverages the latest Microsoft Windows technology to deliver the most powerful lens processing software available. Supporting multiple concurrent users and built upon the high
performance Microsoft SQL Server 2000 database engine, LensMate Lab provides all the
tools necessary for your lab to produce reliably superior results with the latest lenses and
frame styles. Key Features: Windows technology — A familiar Windows user-interface
throughout ensures reduced training time and
increased productivity; Processing speed —
Client/server architecture minimizes workstation processing loads and network traffic
because queries are run at the database
server and only the results are returned across
the network to the requesting workstation;
Security — Install LensMate Lab on Windows
NT, 2000, or XP, and you can “lock-down” the
database so it is only accessible to nonadministrators through the LensMate Lab
applications; Multi-user ready — Multiple
LensMate Lab workstations can work simultaneously, sharing a common database on your
network (the number of workstations is limited
by the capabilities of your network and the
number of software licenses purchased);
Leverage existing investments — You can
install the LensMate Lab database for use
with an existing Microsoft SQL Server 2000
installation or install the included MSDE 2000.
LensMate application (Rx calculation and
reporting): Intelligent job entry and surface
calculations — Easily enter client, lens, and
frame data on the fly or link to previously
entered information with a mouse click. The
calculation engine produces a detailed work
ticket for both the surface and finish departments; Client database — Capture comprehensive client information, including prescription history for each. Easily recall jobs by client assignment; Lens database — Includes an
extensive database of technical specifications
and barcodes from most major lens manufacturers. Records can be grouped, sorted, and
searched. Easily add unpublished lenses as
needed; Frame database — Store frame data
for easy reuse. Attach tracing data to a frame
for the utmost accuracy; Lap tool database
— Keep your lap tool inventory current and
know instantly if the proper tools are in stock
for each job; Reports — The Lens Use report
simplifies ordering by providing information
on each lens used, including quantity, barcode, and product description. The report can
be grouped by manufacturer or lens class and
can be filtered by date. The Lens Use
Summary report reveals usage trends; Setups
and custom configuration — With so many
different lens materials on the market, establishing individual settings for each is essential
for accurate processing. Use the setup editor
to define an unlimited number of surface room
defaults and fining and polishing parameters.
13
Optivision® Laboratory Management
System™
Optivision®
Optivision® unveils the latest version of the
world-renowned Optivision® Laboratory
Management System™, the most comprehensive, easy to use and affordable full Lab
Software system in the industry. Optivision®
takes advantage of the user-friendliness,
speed and other feature-rich functionality of
the Windows® operating system.
Optivision’s powerful Windows®-based Lab
Software promotes accurate job entry & automated lens processing for wholesale and
retail surfacing, finishing and AR coating labs
of any size.
Designed by lab people for lab people, the
Optivision®
Laboratory
Management
System™ will meet your needs now and in the
future. The user-friendly system allows your
lab the power and flexibility to customize the
system to match the specific procedures of
your lab. Designed to reduce errors during the
order entry process, the system immediately
checks operator entries to notify the user of
any invalid entries or values. Barcode scanning capability speeds order entry by automating the entry of information from your
DevCom application (device communications extensive custom database.
manager): Provides interface capability with
Designed to reduce errors during the order
the latest Optek devices and those of most entry process, the Optivision® Remote Order
other manufacturers.
Entry (ROE™) immediately validates data to
notify the user of invalid entries or values.
ANNOUNCING SWEEP.
A REVOLUTION IN DIGITAL
SURFACING.
Breakthrough Surfacing Technology
%" &# &
&&$&%% !!&%!! "
%"!# &#$$!&%$"%#$!#!# &
&#&" $!#% &$&%"&
$!# &$&%"& $ &"
$ &&#%$"!%#$$#&!! &
$&$# %!&%"&%$"#&" &% $
$ % !#"&"%!&$#%&%&#&%&%
%"$%"# "%&!%
Phone: 503.231.6606 Fax: 503.231.4943
6805 SE Milwaukie Ave. Portland, OR 97202
www.thedvi.com
10/12/11 11:59 AM
14
SOFTWARE SYSTEMS
Drop-down menus allow for choices in data
entry, extra services, special instructions and
Lab Software Systems
standard shapes. The Optivision® ROE™
allows for the scanning of a frame trace so
that the dispensary’s customers never need to
part with their frames. Quality traces are
lab equipment. Using hardly any resources,
ModShape™ does not need to run on a dedicated PC and requires only one free serial
port. ModShape™ appears as a standard
edger & tracer to the lab system host:
• View & verify shapes
• Change A, B and/or Circumference
assured due to a new method of calibration.
• Adjust DBL
The ROE™ is extremely user friendly and will
• Detailed grid to check for off-axis tracings
save Rx turnaround time, limit missing data &
streamlines the routine tasks associated with
payroll management. Employees clock in and
out using a card that holds a magnetic stripe,
similar to a credit card. Going paperless gives
you immediate access to important time card
information. The paper is gone so data can
now be extracted for use in generating other
kinds of information that depend on the time
card data such as payroll ledger entries and
invoices. The electronic solution delivers
ease-of-use and greater control over office
information.
eliminate data entry errors, which ultimately
• Rotate axis
reduces breakage.
• Original vs. modified shape comparison
OptEquip™, the Machinery Interface compo-
• Easily create multiple eye sizes for one Now there is no reason to use an outdated
shape
mechanical device:
• No more making patterns and hand-adjust•Reduce costs: Eliminate the need for
ing
unwieldy, high-maintenance punch-card sys• Save time - simple to use
tems
• Use with any lab system software
•Determine at-a-glance who is clocked in, at
ModShape™ is easy to install & use with any
OMA/VCA compatible lab management host what time and in which department
nent, allows machines from different manufacturers to interact with each other through- The Machine Host Translator™ is a
out lens processing. Imagine tracing a frame Windows®-based program that acts as a
conduit between your lab software host’s
on one brand of tracing equipment, surfacing
machine interface and lab surfacing & finishon another brand of generator and edging it ing machines. Some lab software systems
on yet a third different brand of edging equip- such as DVI®, Optifacts® or others may not
ment. Your lab now has the complete freedom transmit data in a format compatible with the
lab equipment or the lab simply wants to
to choose, mix and match any lab equipment apply advanced detail to job processing - this
you want without ever worrying about manu- is where the Machine Host Translator™ is of
superior value.
facturer machine compatibility.
The power of the Machine Host Translator™ is
Extensive lens usage and management its ability to alter or enhance the data being
reports help you monitor all aspects of your sent between the host lab software system
system for increased efficiency in your lab. and the lab equipment:
System customization capabilities allow you • Enable use of a machine's OMA/VCA trace
to maintain system constants through simple format not supported by the lab software
system
menu options, allowing for true customization
• Utilize 1000-point and higher trace resoluof the software.
tion
Completing your lab’s software system are • Adjusting the shape to insure a better fit on
integrated Accounts Receivable, Accounts frames that "squish" at the box B
software system! Download the latest version •Increase awareness: User maintenance conof ModShape™ now at www.modshape.com
or call 800.795.9927.. Email info@modshape trols help you gain complete control
com today for a free 30-Day no obligation trial! •Assign employees to salary departments for
tracking and reporting
Optivision® Drill Points Editor™
Optivision®
•Computerized calculation of hours ensures
precise payroll processing
•Summary
and
detailed
reporting:
Departments, date ranges, employee status &
type
Payable and General Ledger accounting mod- • Add drill data to rimless jobs when not supA software solution for rimless drill mount
ules - no more double-keying data into ported by the lab software system
QuickBooks or other third-party accounting • Make conditional decisions to enhance or data, the Optivision® Drill Points Editor™
software program manages the drill point data
alter data based on specific job information
software.
that can be sent to drill machines and edgers
• Allowing special processing of data for an capable of drilling. The Drill Points Editor™
• Fast and easy one-page Order Entry
exact machine, regardless of the other lab supports frames that have up to three holes
machines
and/or notches/slots in both the temple and
• Precise surfacing calculations
nasal sides of the lens with the ability to store,
• Restrict blocking prism to certain surface
edit and maintain this data in a simple data• Windows®-based software
blockers
base:
• Restrict certain materials sent to certain
• Freeform compatible
•Ability to match and place the drill data in the
edgers
job tray regardless of lab software brand
• Machine interfacing
• Enable edge polishing on certain machines
•Match on frame manufacturer, frame name &
or certain types of jobs
• Job flow tracking
eye size
Download the latest version of Machine Host
• Accurate invoice pricing
•Three horizontal, vertical, diameter & end
Translator™ now at www.machtranslator.com
positions for temple & nasal
or call 800.795.9927. Email support@
• Inventory control
machtranslator.com today for a free 30-Day •Notch Modes support ‘Movement Length’,
‘End Hole Position’ or ‘Edge Position’
• Integrated accounting
no obligation trial!
• Comprehensive reporting
• Automated lens & program updates
ModShape™
ModShape™
• Can be tailored to suit the way your lab
•Payroll staff has instant access to the information needed
•Your lab runs smoother!
This is by far the easiest way to track and
report employee hours. Magnetic card reader
with keypad enables the user to add enhanced
functionality to any standard computer. It connects easily to your existing PC using a serial
or keyboard wedge interface.
team and contact information at www.optivision.com or call 800.795.9927 now!
Lens Casting Lab
Optivision® Casting Manager™
Optivision®
•Ability to import drill data files
Optivision® Time & Attendance
System™
conducts business.
•Improve productivity: Reduce payroll preparation time and increase accuracy
team and contact information at www.optivi-
A software solution for casting lens Rx, the
Optivision® Casting Manager™ software program has a screen layout and data input that
includes:
•Enter Rx
• The most affordable lab software!
Optivision®
Visual Lab Pro Software
OWC
View, modify & save any frame shape or pattern to and from your lab system!
Some lab software systems such as
Optifacts®, Innovations® and others may not
allow you to view and modify frame shapes.
With the Windows®-based ModShape™ software, your lab can change any active shape
from your lab system. ModShape™ requests
frame shape data from the lab system by tray
or job number. You can then modify the
shape's A or B box measurements, the circumference, or modify just the lower half of
A Windows-based lab calculation package the box B - useful for accommodating progressive lenses! ModShape™ will then save
that is suited for interface. Billing and blank the modified shape to the same or different
programs are built into the system. CD Rom or job.
floppy available.
Used in conjunction with the Optivision®
Laboratory Management System™, the
Optivision®
Time
and
Attendance
Management solution is integrated into the
Optivision©
Laboratory
Management
System™ Machinery Interface. This will automate the process of employee labor tracking
and time management. No more endless
hours spent figuring and adding up employee
time card entries! Employees clock-in and out
directly from the card reader, eliminating the
need to maintain cumbersome, punch card
Connecting ModShape™ to a lab system host systems. In the payroll office, hours are easily
is no different than connecting a new piece of viewed and adjusted where necessary and
•Select front mold
•Select back mold
•Select gasket
•Count mold usage
•Measure distance between front/back
•Ability to generate PO based on certain criterion for consumables
•Ability to print out and/or send POs electronically
•3 million data combinations
10/12/11 11:59 AM
16
SOFTWARE SYSTEMS
Remote Order Entry
DigitalTrace™
DigitalTrace™
cally for the needs of the optical lab and produces management reports summarizing
production activity, late and promised work.
TRACE enables the lab to increase usable,
current information and reduce non-productive hours searching for jobs. TRACE is
expandable and can be interfaced with DVI/
VISION or other systems.
Optivision® Remote Order Entry
(ROE™) w/ Trace
Optivision®
• Job Entry validates the Rx data to be correct
before sending
• Connects easily to blockers, edgers and
tracers
• Easy to set up, configure and begin using
• Traces can be queued and Job Entry performed later
• Communicates with equipment using the
industry-standard data communication protocol (VCA/OMA compatible)
Take a tour and download the latest version
of DigitalTrace™ now at www.digitaltrace.net
The Optivision® Remote Order Entry (ROE™) or call 800.795.9927. Email info@digitaltrace.
with Trace is the best in the industry. The
net today for a free 30-Day no obligation trial!
ROE™ is a web-based Rx ordering screen
FrameTrace.com™
with patent-pending technology that easily
accepts frame trace data from all popular
FrameTrace.com™
frame tracers. ECPs, dispensaries and satellite locations can transmit Rx orders directly
into the lab system through the Internet.
With DigitalTrace™ fast & easy job entry, a
Doctor or ECP's centrally located edging lab Designed to reduce errors during the order
can receive a trace from a satellite location to entry process, the ROE™ immediately valihave the job blocked & edged in minutes!
dates data to notify the user of invalid entries
or values. Drop-down menus allow for choices
• Creates a remote transmit and receive situin data entry, extra services, special instrucation for finishing labs with remote entry locations and standard shapes.
tions
The Optivision® ROE™ allows for the scan• Utilizes the Internet to transmit job data, so
ning of a frame trace so that the dispensary’s
no dedicated phone lines are needed
customers never need to part with their
• Job Entry validates the Rx data to be correct frames. Quality traces are assured due to a
before sending
new method of calibration. The ROE™ is
extremely user friendly and will save Rx turn• Connects easily to blockers, edgers and
around time, limit missing data & eliminate
tracers
data entry errors, which ultimately reduces
breakage.
• Traces can be queued and Job Entry per- No more faxes and no Rxs for staff to re-key
formed later
means time and money saved by eliminating
• Full configuration control over the lens and errors and call-backs - your lab will be processing more orders and getting them out the
services database
door faster! The use of Eyefinity, VisionWeb
• Communicates with equipment using the and Interlab Transfer services are integrated
industry-standard data communication proto- into the ROE™. This module also provides
col (VCA/OMA compatible)
Web-based Work in Progress where your
Take a tour and download the latest version customers can access job status online 24
of DigitalTrace™ now at www.digitaltrace.net hours a day.
or call 800.795.9927. Email info@digitaltrace. Find more about Optivision® products, our
net today for a free 30-Day no obligation trial! team and contact information at www.optivision.com or call 800.795.9927 now!
Remote Job Processing Software
A.I.T. Industries
• Utilizes the Internet to transmit job data, so
• Full configuration control over the lens and
services database
DigitalTrace™ is the perfect solution for
optometrists, opticians and other ECPs to
connect satellite tracing locations with a centralized edging lab.
DigitalTrace™ combines a simple and quick
job entry interface with input from a frame
tracer to create remote jobs - these jobs are
then received and processed effortlessly at
the edging location. The Job Entry window
has a 'Send Now' button that sends the job to
the centralized internet database that accepts
jobs every minute of every day. The job data
is checked prior to sending, helping to eliminate data entry errors.
• Creates a remote transmit and receive situation for finishing labs with remote entry locations
FrameTrace.com™ creates the easiest way
for a frame trace to be sent with any Rx order:
• Dispensary traces frame, enters reference,
clicks send - Done!
• Lab selects a trace, enters tray number,
clicks save - Done!
Reduce shipping cost, reduce errors and
increase efficiency & productivity by no longer
waiting for frames to arrive! Regardless of
your lab system software, FrameTrace.com
places electronic trace data in the tray with
the designated Rx - just as if you traced the
frame right there in the lab.
FrameTrace.com™ is also the perfect solution
for sending & receiving traces for VSP jobs!
Contact FrameTrace.com™ by visiting
‘Feedback’ at www.frametrace.com or send
an Email to [email protected]
Remote Tracing
DigitalTrace™
DigitalTrace™
A.I.T.’s Remote Job Processing Software is a
windows-based Rx Job Entry Software that
supports the OMA standard for communication between an OMA tracer, blocker and
edger. With RJP, a practice can centralize their
job processing and send Rx prescriptions
directly from the dispensary of a satellite
office via the internet or via a LAN network.
RJP runs on a Windows 98 or better operating
system and can be utilized to increase the
efficiency of your in-office lab by dividing
duties of production with the logical process
of dispensing eyewear.
DigitalTrace™ is the perfect solution for
optometrists, opticians and other ECPs to
connect satellite tracing locations with a centralized edging lab.
job entry interface with input from a frame
Visit www.aitindustries.com for current pricing
DVI/RxWizard
Digital Vision
is checked prior to sending, helping to elimiA modular, stand-alone system utilizing PC
nate data entry errors.
hardware, bar code labels and scanner stations to track jobs from start to finish. TRACE With DigitalTrace™ fast & easy job entry, a
will speed customer service, expedite produc- Doctor or ECP's centrally located edging lab
tion, and create statistical analysis of produc- can receive a trace from a satellite location to
tion. The TRACE software is designed specifi- have the job blocked & edged in minutes!
10/12/11 11:59 AM
EDGERS
CONTINUUM SOLO to grow your profits.
Automatic Edgers
Continuum
A.I.T. Industries
Features and Benefits:
* 2 grinding wheels for
materials(Glass,
CR-39,
Polycarbonate, and Trivex)
roughing all
High-Index,
* Specialized roughing process for lenses with
slick coating such as superhydrophobic
coatings(could also be applicable for very thin
mineral lenses)
* Grinding wheel for beveling all materials
* Automatic polishing of all plastic materials
including polycarbonate and Trivex.
ing it easier to train a new operator. Building
upon greatness to perfection the Maxima
Evolution advances our proven track record of
a technology leader in patternless edging
systems. As the perfect complement, the
carefully designed CNC-3D is a simple and
user-friendly tracer-blocker. The CNC-3D
includes binocular 3D tracer with integrated
blocker and shape modification without any
variation of the pupil distance. To make use
easier, the CNC-3D has a LCD display with an
easy to use tutorial interface. The Maxima
Evolution Speed CNC-3D System provides
“Cutting Edge Technology” at an affordable fit
in an easy to use process.
* Automatic internal and external safety bevel Contact A.I.T. Industries for current pricing.
* continuous 3D mapping
CONTINUUM defines the tradition of AIT.
Since 1964 AIT has been providing lens finishing solutions that fit our core principles: simplicity of operation, durability of design, ease
of repair, and the lowest cost of ownership in
the industry. Today CONTINUUM offers a
streamlined and attractive design with
advanced electronics to deliver patternless
technology that will provide you with years of
trouble free operation. CONTINUUM is born
from our many years of experience in the
industry developing patternless technology
that will process the most advanced lens
coatings and all lens materials in the market.
CONTINUUM offers 3D tracing, beveling,
grooving, safety bevel and polishing of all
plastic materials to deliver a solution that
meets the core lens processing needs of
every lab. You can trust in AIT’s CONTINUUM
to grow your profits.
* Bevel programs: automatic, program guided,
manual and flat
* CE compliant
* UL Approved
Contact A.I.T. Industries for current pricing.
Continuum Solo Satellite Tracer
A.I.T. Industries
* 2 grinding wheels for
materials(Glass,
CR-39,
Polycarbonate, and Trivex)
roughing all
High-Index, The Continuum Solo Satellite Tracer offers the
flexibility to be utilized in many different envi* Specialized roughing process for lenses with ronments. It can be used as a remote tracer
slick coating such as superhydrophobic for retail locations to a wholesale lab. As a
coatings(could also be applicable for very thin production tracer for wholesale labs utilizing
our specialized tracing software to meet the
mineral lenses)
needs of today’s wholesale lab. It can also be
* Grinding wheel for beveling all materials
utilized as a part of a complete In-Office
Finishing Lab solution with our Continuum
* Automatic polishing of all plastic materials
Solo. Features include: 3D tracing of Frames,
including polycarbonate and Trivex.
2D tracing of patterns and demo lenses, VCA
* Automatic internal and external safety bevel Communication Compliance, ability to change
shapes.
* continuous 3D mapping
* Compliant with the VCA Communication
Standard. EN-ISO 16284:2001
Maxima Evolution Speed CNC-3D
System
A.I.T. Industries
* CE compliant
* UL Approved
Continuum Solo
A.I.T. Industries
CONTINUUM SOLO defines the tradition of
AIT. Since 1964 AIT has been providing lens
finishing solutions that fit our core principles:
simplicity of operation, durability of design,
ease of repair, and the lowest cost of ownership in the industry. Today CONTINUUM
SOLO offers a streamlined and attractive
design with advanced electronics to deliver
patternless technology that will provide you
with years of trouble free operation.
CONTINUUM SOLO is born from our many
years of experience in the industry developing
patternless technology that will process the
most advanced lens coatings and all lens
materials in the market. CONTINUUM SOLO
offers beveling, grooving, safety bevel and
polishing of all plastic materials to deliver a
solution that meets the core lens processing
needs of every lab. You can trust in AIT’s
Maxima Evolution Speed CNC-3D provides
sophistication and simplicity in an automatic
edging system. The Maxima Evolution benefits from two major mechanical enhancements, improved electronics, and an improved
user interface that makes operation more
intuitive. Utilizing advanced servo motors, the
Maxima Evolution has the ability to control
shape and size to thousandths of a millimeter.
With its sophisticated software and electronics, the A.I.T. exclusive advanced minibevel
feature enhances aesthetics with metal
frames, while our 4D grooving function and
external and internal safety bevel assembly
automatically angles for the perfect placement of grooves and safety bevels. The new
grooving and safety bevel design is now able
to tilt from 0 to 15 degrees for any shape or
size lens to provide perfect placement of the
groove and the highest quality pin bevel, thus
virtually eliminating the need for a hand edger.
The Maxima Evolution utilizes a new microprocessor that provides for faster calculations, translating into a faster cycle time. The
Maxima Evolution comes with a classic mode
of operation, as well as a tutorial mode, mak-
017-024_SF1110_Edgers.indd 17
A.I.T. Industries
* Compliant with the VCA Communication
Standard. EN-ISO 16284:2001
Features and Benefits:
* Bevel programs: automatic, program guided,
manual and flat
Maxima Evolution Speed Combimax
System
The Maxima Evolution Speed Combimax
System makes the most difficult jobs easier,
safer, and more reliable. The Maxima Evolution
Speed Combimax System benefits from two
major mechanical enhancements, improved
electronics, and an improved user interface
that makes operation more intuitive. Utilizing
advanced servo motors, the Maxima
Combimax Evolution Speed has the ability to
control shape and size to thousandths of a
millimeter. With its sophisticated software and
electronics, the A.I.T. exclusive advanced
minibevel feature enhances aesthetics with
metal frames, while our 4D grooving function
and external and internal safety bevel assembly automatically angels for the perfect placement of grooves and safety bevels. The new
grooving and safety bevel design is now able
to tilt from 0 to 15 degrees for any shape or
size lens to provide perfect placement of the
groove and the highest quality pin bevel, thus
virtually eliminating the need for a hand edger.
The Maxima Evolution Speed Combimax
System utilizes a new microprocessor that
provides for faster calculations, translating
into a faster cycle time. The Maxima Evolution
Speed Combimax System comes with a classic mode of operation, as well as a tutorial
mode, making it easier to train a new operator.
Building upon greatness to perfection the
Maxima Evolution Speed Combimax System
advances our proven track record of a technology leader in patternless edging systems.
As our most sophisticated tracer/blocker, the
Combimax is the perfect complement to the
Maxima Evolution Speed Combimax System.
The Combimax uses Digital Image Processing
technology and combines a tracer, blocker
and centering device in a single machine.
Using the latest technology, the Combimax
features simultaneous binocular reading,
shape modification on both the horizontal and
vertical axes. With the Maxima Combimax
Evolution Speed, operators have the tools to
effortlessly make high quality eyewear consistently without worry.
17
Award of Excellence nominee, plus several
significant mechanical and electronic
upgrades. The MAXIMA Speed EVOLUTION
now combines the use of high precision servo
motors plus a new 4D grooving, allowing
angling automatically from 0 to 15 degrees,
and external and internal safety bevel assembly. With the use of servo motors, the MAXIMA
Speed EVOLUTION offers unprecedented
reproduction of size and shape holding tolerance within thousandths of a millimeter. Using
an A.I.T. exclusive design, the advanced
Minibevel allows for the fit to all mountings in
thin metal frames.
MAXIMA Speed
EVOLUTION also features: automatic control
of clamping pressure, automatic calibration,
automatic polishing of all plastic materials
including polycarbonate and Trivex, dynamic
speed control, grinding wheels to process all
materials including Trivex, a specialized
roughing process for lenses with slick coatings, and Active Noise Reduction (ANR) system incorporated to reduce the level of noise.
The MAXIMA Speed Evolution has a minimum
B dimension of 18mm rimless, 19.6mm bevel.
With its VCA/OMA communication standard
interface, the MAXIMA Speed EVOLUTION
integrates easily to the most popular lab management software products in the market. The
MAXIMA Speed EVOLUTION is a natural evolution of AIT/INDO’s great track record as a
technology leader in industrial lab edgers.
Practica Patternless Edger
A.I.T. Industries
The Practica Edger features: a Windows™
type user’s interface; continuous 3D mapping;
bevel programs: automativ bevel, programmed guided level, manual bevel, flat &
proportional; 4 diamond wheels for all materials: glass, CR-39, high-index, organic, polycarbonate; optional polishing feature; error,
alarm and help messages to assist in troublefree operation; quick-set controls for fast
programming; statistics; self-diagnosis, automatic calibration; automatic sharpening of
wheels; OMA compatible; mini-bevel and
standard bevel options.
Practica Patternless System
A.I.T. Industries
MAXIMA Speed EVOLUTION
A.I.T. Industries
AIT’s Practica System answers the industry’s
call for 3-D patternless technology at an economical price. The Practica is the practical
solution for low volume retail shops looking
for the latest in bevel edging technology. Its
streamline design provides a space savings
The MAXIMA Speed EVOLUTION is AIT/
INDO’s next generation of industrial edgers. It advantage, making it possible to get the most
incorporates all the great features of its prede- from your lab working area.
cessor, Maxima Speed, a three time OLA Contact A.I.T. Industries for current pricing.
10/12/11 11:00 AM
18
EDGERS
Automatic Edgers
Reconditioned Maxima Patternless
Edger
A.I.T. Industries
The new Maxima Edger, with its unique and
innovative design, breaks with all convention,
and presents a new concept in lens edging.
Maxima is the first edger on the market to
include three-dimensional digital technology,
allowing the bevel to be viewed during edging
on a high definition color graphic screen. The
Maxima Edger is equipped with four grinding
wheels, continuous 3-D mapping, automatic
pin-beveling and 3-D grooving to process
glass, CR-39, Polycarbonate and Hi-Index
lenses. Unique features of the Maxima edger
such as mini-bevel, windows icon based interface, quick set controls, automatic calibration,
automatic control of clamp pressure, head
pressure and warning messages to eliminate
operator errors make the Maxima a one of a
kind machine. The Maxima edger has the
capability to operate in a wholesale lab environment with the ability to communicate
under the Optical Manufacturing Association
communication standard and is bar code
capable. Maxima: 16.34” high x 24.1”w x
17.32”d 220V/50Hz - 110V/60Hz, 800W consumption.
base curve wrap frames with ease and have
integrated drilling directly into the machine. In
addition to this, the WECO Edge 580 integrates with the Opera Scan and many of our
existing Indo Tracer/Blockers for those looking to upgrade their Indo patternless edgers
while keeping their pre-existing Tracer/
Blocking systems. This makes the Edge 580
an ideal choice for someone looking for a
High production edger equipped with all versatile machine that can handle the most
material wheels to edge glass, plastic and challenging frames in the industry.
poly. Average cycle time: one minute. Contact A.I.T. Industries for current pricing.
Capabilities: rimless edging, electric chucking, finish 85mm lenses. Patternless-ready
Alta XS
capability to integrate with our Delta Scan
Briot
System. 17”h x 28”w x 21”d. 165lb. 120V AC,
60Hz, 10A.
Re-Manufactured Grande Mark AME
Briot Alta XL
A.I.T. Industries
Briot
01663
Re-Manufactured Mark V Deluxe
A.I.T. Industries
Low cost edger. The Mark V is the most popular edger ever built. The Deluxe model combines the simplicity of the earlier version with
several performance-enhancing advances.
Available for glass and plastic lenses or plastic lenses only. Available with either manual or
air chucking. Capable of edging from half-eye
size to 85mm decentered. Also capable of
rimless edging when equipped with hidden
bevel finishing wheel. Cycles average about
one minute. Patternless capability. 20-1/2”h x
27-1/2”w x 19”d. 120V, 60Hz, 10A.
A00360
Reconditioned Maxima Speed System
WECO Edge 580 Patternless Edger
A.I.T. Industries
A.I.T. Industries
Briot has expanded its trendsetting Alta generation of edgers to include the Alta XS system. Alta XS features a new tracing, centering
and blocking unit that is even more innovative
in design. A large high-resolution touch
screen gives quick access to all system functions. A new shape library, customizable
through an alphanumeric keypad, organizes
data to be easily accessed through Sort,
Search, Favorites and other criteria. Alta XS
delivers the essential functions needed to
produce all your standard and premium jobs.
Drill-hole recognition, shape modification,
high-quality finishing: for the first time, all
these functions are available on a mid-range
centering/blocking system.
XS TracerBlocker: 13” W x 20” D x 23” H, 49 lbs. NX
Edger with Drill: 20” W x 24” D x 22.5” H, 152
lbs.
Briot Alta Automatic Edging and Drilling
System
With advanced engineering, the NEW Briot
Alta makes it easier than ever to finish all lens
types including premium lenses and high base
curves. The Alta traces in 5-D and centers and
blocks automatically. Alta reads single vision
without a lensmeter and automatically identifies the optical center, It analyzes and displays the bifocal segment, and reads progressive markings automatically, Briot’s patented
imaging technology displays the uncut lens so
you ca reshape any parameter or segment.
Alta shows you where to place the drill holes
and lets you make adjustments. The edger’s
color touch screen has new 3D pictograms
and operator customizable settings. It drills,
grooves and safety bevels automatically, tilting up to 30 degrees. The Alta edger provides
special settings for AR coated and fragile
lenses, and can process all lens materials
including
TrivexTM The edger can process lenses as
small as 17.75 mm “B” to handle today’s
trendy eyewear. The Alta offers a luster polish
to provide a high quality finish to your jobs.
Alta tracer-blocker: 13” W x 24” D x 26” H, 91
lbs. Alta edger with drill: 20” W x 24” D x 22.5”
H, 152 lbs.
Silver Plus
Briot
Contact Briot for current pricing.
Briot Alta Pro
Briot
The Reconditioned Maxima Speed System is
designed for the high volume retail practice or
wholesale laboratory. It offers unparalleled
speed and accuracy providing users with the
latest 3-D technology at speeds comparable
to older free float edging technology. The
Maxima Speed offers a cycle time which can
be anywhere form 50-200% faster than competitive models depending upon the type
cycle. The Maxima Speed is a 220 volt
machine with high speed motors which has
the capability to edge glass, plastic, poly and
hi-index lenses all in one machine. Unique
features of the Maxima include an industry
only mini-bevel feature, automatic polishing,
automatic grooving and safety beveling for
most shapes. Coupled with the Combimax
Layout and Tracer the Maxima provides automatic axis and optical reference point alignment correction when using the Combimax’s
Patented Digital Image Processing System.
The Combimax tracer has a dual simultaneous tracing mechanism which provides the
fastest trace cycle in the industry with the
most durable mechanical components to provide years of trouble free operation. The
Maxima Speed system offers the features of
tomorrow but available today. Maxima Speed
specifications: 16.34”h x 24.1”w x 17.32”d.
220V/50Hz 400W. Combimax Specifications:
12.91”h x 16.14”w x 14.76”d. 110V/60Hz
400W.
Due to frequent changes in optical fashion,
high-end patternless edging systems need to
be versatile. With this in mind, WECO has
designed the new Edge 580 to process high
base curve wrap frames with ease and have
integrated drilling directly into the machine. In
addition to this, the WECO Edge 580 integrates with the Opera Scan and many of our
existing Indo Tracer/Blockers for those looking to upgrade their Indo patternless edgers
while keeping their pre-existing Tracer/
Blocking systems. This makes the Edge 580
an ideal choice for someone looking for a
versatile machine that can handle the most
challenging frames in the industry.
The Accura Silver Plus is equipped with a
wide range of labor-saving features including
automatic safety beveling and grooving,
hyper-polish and 4-D frame tracing for accurate frame fit. Pre-set and manual bevel
options provide amazing versatility in a midThe Alta Pro provides unsurpassed speed and
range machine. Edges all lens materials, even
accuracy for finishing most lens materials and the most slippery lenses. 26” in. W x 24.5” D
frame designs. The new upgraded motoriza- x 17” H
tion optimizes the edging algorithms resulting Contact Briot for current pricing.
in up to 43% faster operation. The Alta Pro
Coburn Finish Blocking Pads
integrates a new wheel dedicated to high
Coburn
WECO Edge 580 Patternless Edging curvature lenses. Wheel allows you to change
the angle of the bevel to match the frame Coburn finish blocking pads are available in a
System
groove angle, and to adjust the back facet up variety of shapes and sizes and offer outA.I.T. Industries
to 3mm. The edger clearly displays 3-D picto- standing torque resistance to eliminate axis
grams that guide the operator easily through problems during edging. These pads also
the finishing process. Drilling unit works at offer superior adhesion to all lens types
any angle from 0 to 30 with an accuracy of including anti reflective and hydrophobic
coatings. Coburn pads hold firmly while
0.1mm to allow optimum accuracy on drilled
blocking and edging, and after processing will
and semi-rimless prescriptions. Edging accuremove cleanly leaving no adhesive residue
racy delivers superior quality that your cuson blocks or lenses.
tomers notice. Use the Alta Pro in a VCA/OMA 270621 18 mm, round, Essilor Posiblock half eye,
environment, or combine it with the Alta XL or 1,000 per roll
Alta XS tracer/blocker for a complete high 270631 18 mm, semi-round, Weco Vario half eye,
Due to frequent changes in optical fashion,
1,000 per roll
high-end patternless edging systems need to speed lab system. 20” W x 24” D x 22.5” H, 270641 24 mm, square, all purpose, 2,000 per roll
be versatile. With this in mind, WECO has 152 lbs.
270651 24 mm, round, all purpose, 2,000 per roll
designed the new Edge 580 to process high Contact Briot for current pricing.
10/12/11 11:00 AM
EDGERS
ate, and Trivex® as well as edge polish bevels
and flats with unmatched speed and accuracy
making it our highest performance and most
user friendly edging system. The optional
Excelon Edger
3-Dimensional drill makes it possible to create
virtually any lens hole you need, with simple
Coburn
drag and drop options via the integrated userfriendly touch screen. Features user friendly
touch screen and graphical user interface with
detailed edging status is displayed graphically
in real-time. Includes dual CPU system supports full multitasking, editing and loading and
dual side feelers for 50% faster lens reading.
Includes integrated drill module. 21.25” w x
18” d x 23.5” h, 121 lbs, 100/120 VAC, 50/
The Excelon series provides the versatility and 60Hz or 200/240 VAC, 50/ 60Hz. THREE YEAR
efficiency that today’s retail practices require. WARRANTY.
All the finishing processes, tracing to edging, Contact Coburn for current pricing.
are
fully
optimized
with
advanced
3-Dimensional Digital Technology optimizing
productivity and efficiency. Beveling,
Polishing, Grooving and Safety Beveling processes are completely integrated and easily
performed by a simple touch of a button
Features advanced 3-Dimensional digital
technology with “Digital Pattern Layout” tool.
Automatic polishing of beveled, grooved, and
flat-edged lenses. Automatic front and rear
safety beveling with four grinding wheels for
multiple lens materials. 22.5” w x 21” d x 18.5”
h, 100 lbs, 110/220 VAC, 50/ 60Hz. THREE
YEAR WARRANTY.
The Machine Host Translator™ is a
Windows®-based program that acts as a
Excelon EZ Edger
conduit between your lab software host’s
Coburn
machine interface and lab surfacing & finishing machines. Some lab software systems
such as DVI®, Optifacts® or others may not
transmit data in a format compatible with the
lab equipment or the lab simply wants to
apply advanced detail to job processing - this
is where the Machine Host Translator™ is of
superior value.
Automatic Edgers
The Excelon EZ Series is a cost-effective and
compact finishing system that integrates edging, blocking and tracing for ease of use. The
system features Customized Lens Edging and
the graphical display guides you through
easier handling from the beginning to the end
of edging processes. The Excelon EZ edger
combined with the EZ tracer/blocker reduces
non-value added steps and delivers high quality lenses to the market at the lowest cost of
ownership. Features advanced 3-Dimensional
digital technology with “Digital Pattern
Layout” tool. Beveling can be previewed and
customized graphically and one-stop edging
from lens layout to selection of edging options
can be completed through a one-page display. 22.5” w x 21.25” d x 14” h, 110 lbs,
110/220 VAC, 50/ 60Hz. THREE YEAR
WARRANTY.
Optronics 7E Patternless Edger
National Optronics
OptiSource
This ultimate lab edger processes all plastic,
polycarbonate, hi-index and trivex materials
and any bevel or frame type. A streamlined
state of the art, hi speed process has made
the 7E the most widely used lab edger in the
market. It features a hi speed angled drilling
function with a resident drill database that
also allows for adding and editing of frame
information. It also features automatic grooving. As the most flexible unit available today, it
uses accurate, variable tooling to process any
shape or bevel type- even hi wraps, shelf and
faceted bevels. Features include: fast cycle
time, full range bevel placement, automatic
polishing, automatic pin beveling, electric
chuck, color monitor, status indicators and on
screen maintenance. And it processes down
to a 16 B measurement frame. 25”w x
26d”x28”h. 135 lb. 115V or 230V AC
This Hide-a-Bevel Hand Edger unit allows for
EASY finishing of lenses prior to mounting
them onto frames. The Hand Edger has a
water tank which precisely drips water onto
the edging wheel to control the temperature.
This Hand Edger is built with a 35 mm wide
Diamond Dusted Wheel with a V-groove pattern. Replacement Parts Available.
32-HANDEDGER
AES-1000, Robotic Edging System
Santinelli
Contact National Optronics for current pricing.
Shape Lens Finishing Center
Optek
• Utilize 1000-point and higher trace resolu- Key Functions -Edge types (straight and
tion
angled) —Rimless, groove, square bevel, “V”
bevel, step bevel, facet, polish; Hole/Slot
• Adjusting the shape to insure a better fit on
types (straight and angled) — Blind hole,
frames that "squish" at the box B
through hole, slots, notches, countersunk,
• Add drill data to rimless jobs when not sup- jewel; freeEDGE technology —Unlike systems
that use complex interfaces that make operaported by the lab software system
tors feel like they need computer program• Make conditional decisions to enhance or ming experience, freeEDGE software technolalter data based on specific job information
ogy simplifies the process and allows you to
• Allowing special processing of data for an easily create high-end design features: freeexact machine, regardless of the other lab form edges; engraving; designs can be mirContact Coburn for current pricing.
rored, scaled, rotated, and repeated to best fit
machines
Excelon XD Edger
the lens shape; and an onboard database
• Restrict blocking prism to certain surface saves designs for reuse.
Coburn
blockers
Key Features -Touch screen control system;
• Restrict certain materials sent to certain Click and drop predefined lens features based
edgers
on frame manufacturer’s specification; Six• Enable edge polishing on certain machines position tool turret maximizes the processing
range and minimizes the need to change out
or certain types of jobs
tooling; Lens driven from front and rear to
Download the latest version of Machine Host minimize slippage; Infinitely variable clamping
Translator™ now at www.machtranslator.com pressure to ensure best results; Sealed cutor call 800.795.9927. Email support@ ting chamber minimizes debris contamination
The Excelon XD edges all lens materials machtranslator.com today for a free 30-Day of machine components; Serial interface
including glass, plastic, hi-index, polycarbon- no obligation trial!.
capability with VCA-compliant host Rx soft-
ware; control system is easily softwareupgradeable
Hide-a-Bevel Hand Edger
The power of the Machine Host Translator™ is
its ability to alter or enhance the data being Optek’s Shape combines the latest in multisent between the host lab software system axis machining and software technology to
provide an ophthalmic lens-edging solution
and the lab equipment:
that meets the needs of today’s cutting-edge
• Enable use of a machine's OMA/VCA trace optical laboratory. The Optek Shape delivers
format not supported by the lab software the highest levels of accuracy, speed,
system
dependability, and operational simplicity.
19
Santinelli International’s robotic edging system, the AES-1000, will substantially increase
output, decrease labor-intensive operations,
and increase lab profits. This revolutionary
robotic unit can be purchased with an optional tray stacker (AES-1000S) or can be customfitted to a conveyor belt system. AES-1000
utilizes the proven technology of the SE-9090
Express edger. Additionally, the AES-1000 can
be retrofitted to enhance the standard
SE-9090 model. The AES-1000 boasts the
smallest footprint (9 sq ft.) available on the
market, and is constructed of heavy-duty
materials for a true “24/7” industrial operation.
In addition, this robotic unit was designed for
easy accessibility for quick maintenance.
Contact Santinelli for current pricing.
AES-1500 Edging System
Santinelli
The AES-1500 is the first robotic system to
incorporate a tilt drill function and a tilt groove
function for perfectly drilled and grooved
lenses, resulting in a lighter, better fitting
frame. The AES-1500 has a ten-tray stacker
design for easy auto loading / unloading and
is also offered with a conveyor belt design.
The AES-1500 seamlessly interfaces with the
SE-9090 Express industrial edger for
increased throughput of high quality lenses,
and is VCA compliant.
10/12/11 11:00 AM
20
EDGERS
Me 1200 Multifunction lens Edger
Automatic Edgers
Santinelli
Le 1000 Edger
Santinelli
in reliability and speed combined with
unmatched precision. The machine edges
lenses as small as 18.5 mm B, offers fully
automated all-in-one processing including inchamber variable angle drilling and a highly
accurate non-contact measuring system. The
ES-4 is the most versatile, cost-effective
edger available. Specs: 1,494 x 1,499 x 1,876
mm (w x d x h). 980 kg. 400 V, 50/60 Hz, 4
KVA, 16 A.
ES-curve
Enabling Finishing Labs to make the impossible-possible, Santinelli International introduces an all-new platform with their newest
Santinelli International presents its all new Le Flagship Me 1200 Lens Edger, the most com1000 Lens Edger, The company’s most afford- pact, feature-rich lens edger ever introduced.
able edging system for entry-level and budget The addition of the Me 1200 now creates the
conscious Eye Care Practitioners. The Le industry’s most complete finishing line-up.
1000 features a Soft Grind Mode and stabiliz- With its industrial-grade design, the unit was
ing chucking pressure which protects against manufactured for highest precision and “whisper-quiet” drilling and notching. It processes
crazing of super-a/r coated lenses and easily
every possible type of 3-piece mount, as well
processes small B dimensions for the latest as Chemistrie™ Sunlenses with the unit’s
frame fashions. The all-gear driven mecha- exclusive Click Mode.
nisms provide the highest level of accuracy
The Me 1200 proudly debuts the industry’s
and durability. The Le 1000 precisely edges all
first step-beveling technology for tabletop
of the newest lens materials, including Trivex
units, allowing Rx lenses for any high-wrap
and Polyurethane, and offers the company’s frame. In addition to step-beveling and all of
renowned Crystal Cut™ polish, along with the standard lens edger features, the Me 1200
whisper quiet operation.
delivers top-quality high-curve beveling,
exclusive partial beveling, partial grooving,
The Le 1000 S model is available with Safety
design cut, faceting, advacned shape editing
Beveling and newly improved Grooving fea- and exclusive 3D grooving.
tures. The grooving wheel’s small diameter Contact Santinelli for current pricing.
has been set at an optimal twelve degree
SE-9090 Supra Industrial Edger
angle, resulting in pin-point accuracy of the
Santinelli
groove even on high-base curve lenses. The
Le 1000 L, devoid of Safety Beveling and
Grooving, offers even further savings.
Satisloh
125-1160
125-1162
125-1202
125-1203
125-3181
125-7181
125-7360
Rough
Rough Brazed
Rough Brazed
Rough W/Holes
FVF Hab Rimls
PVF Hab/Polish
PVF Hab/Polish
16mm
Glass
16mm Poly/Plastic 60G
20mm
Trivex 60G
18mm
Glass
18mm Polish Whl V5 in
36MS
F/P Set V5 In
BRIOT4000, 5000, 6000, SCANFORM, ECOSCAN
124-1150
124-1180
124-1220
124-1151
124-1160
124-1161
124-1181
124-1182
124-1183
124-1222
124-1223
124-3120
124-3121
124-3122
124-5200
124-3180
124-4200
124-3200
124-3201
124-2220
124-3220
Rough
Rough
Rough
Rough
Rough
Rough
Rough
Rough Brazed
Rough W/Holes
Rough Brazed
Rough W/Holes
FV4 Angle
FV4 Angle
FVF Hab Rimls
FVF Hab Rimls
FV4 Angle 115V
FV4 Angle 117V
FV4 Angle
FVF Hab Rimls
FV4 Angle 115V
FV4 Angle
15mm
Glass/Plastic
18mm
Glass/Plastic
22mm
Glass/Plastic
15mm
All Materials
16mm
Glass/Plastic
16mm
All Materials
18mm
All Materials
18mm
Trivex 60G
22mm
Trivex 60G
12mm
Glass
12mm
All Materials
12mm
All Materials
20mm
Glass
18mm
Glass
20mm
Glass
20mm
Glass
20mm
All Materials
22mm
Glass
22mm
Glass
GERBER COBURN - INDOMATIC
Professional (2wh-42) & Elite (3&4whl-70/D110-B25)
LEX 1000 Edger
Santinelli
142-1190
142-1210
142-1212
142-1213
142-3170
142-3191
142-3213
142-3171
142-3190
142-3212
142-7170
142-7211
Rough
Rough
Rough Bazed
Rough W/Holes
FVF Hab Rimls
FVF Hab Rimls
FV4 Angle
FV4 Angle
FV4120 Angle
FV4120 Angle
PVF Hab / Polish
PVF Hab / Polish
19mm
Glass/Plastic
21mm
Glass/Plastic
21mm
Trivex 60G
17mm
Glass V 5.7in
19mm All Lens V 5.7in
19mm
Glass V5.7In
21mm
Glass
17mm
Glass V5.7in
21mm ALL Lens V5.7in
145-1150
145-1152
145-1153
145-1220
145-1222
145-1223
145-3220
145-3221
145-7151
145-7227
145-7377
145-7447
Rough
Rough Brazed
Rough W/Holes
Rough
Rough Brazed
Rough W/holes
FVF Hab Rimls
FVF Hab Rimls
FVF Hab Polish
PVF Polish
PVF Hab/Polish
PVF Hab/Polish
15mm
Glass/Plastic
15mm
Trivex 60G
22mm
Glass/Plastic
22mm
Trivex 60G
22mmGlass( CX3020) V7in
22mm All (CX3020) V7in
15mm
All Lens V5in
22mmAll (CX3029P) V7in
37MS F22/P15 V7in or 5in
44MS
F22/P22 V7in
The reliable work-horse of the industry. Either
the 440 or 2440 completely re-built, re-painted
and ready to put into service. Special wheel
combinations
and
chucks
available.
Reconditioning Services are also available for
your 440 or 2440. Have your existing edger
rebuilt to original factory specifications. 18”h GERBER COBURN / ESSILOR(D155-B20)3Wh
x 18 1/2”w x 22 1/2”d. 125lb. 115V AC. 60Hz. PROFILE-DIGI/SCAN-ALPHA-GAMMA
KAPPA - SPARTAN - TITAN - TRIUMPH
Contact Sentilles for current pricing.
DIAMOND WHEEL GUIDE -for
AUTOMATIC DIAMOND EDGERS
Sentilles
• Specially designed finishing wheel and pat- The SE-9090 Supra incorporates an enhanced
ented process to edge high curve lenses, for Central Processing Unit (CPU) for faster, highvolume processing. The unit’s industrialwrap-style frames
design elements promise greater durability
• Advanced Soft Grind Mode for processing and longer, unproblematic ownership, resulting in cost saving for labs.
super-hydrophobic coated lenses – on axis
• Small B processing ability to edge lenses This industrial lens edger boasts revolutionary
self-calibration, ensuring optimum perforwith a narrow corridor
mance deriving from the unit’s “built-in engineer”. The result is perfect bevel placement,
• Optional “side car” drilling unit
exceptional accuracy and a jewel-like finish
• All-new Click Mode Software to manufacture on every lens, every material, every shape for
Chemestrie Sunlenses
every frame. With this lens edging solution,
labs can
The sleek, ergonomically designed edger is Contact Santinelli for current pricing.
extremely user-friendly, featuring Navigation
ES-4 Industrial Edger
Operation technology with sensor status trouSatisloh
bleshooting ability. Though the edger is a
completely new platform, it maintains the
company’s renowned Crystal Cut™ polish and
3D tracing technology. In addition, the unit
achieves superior groove quality for pin-point
accuracy. The groove secures the lens flawlessly within the frame, virtually eliminating
job redos and resulting in significant savings.
PVF 4 Angle115V 18mmPolish Whl V 4.3 in
BRIOT / ACCURA (D110 B19)
The ES-curve turns finishing into a profit center; its 5-axis processing allows your lab to
edge even the most complex Rx jobs at
unequaled accuracy and speed. From high
wraps to angled bevels to the toughest shelving jobs, the fully automated ES-curve will
help you pursue premium jobs while at the
same time reduce breakage and labor. The
ES-curve combines proven National Optronics DIMELP EDGEMASTER II &2000 (D152-B25.4)
finishing technology with Satisloh’s renowned
128-1150 Rough 2000
16mm
Glass/Plastic
industrial design.
129-1190 Rough
19mm
Glass/Plastic
129-1191 Rough
19mm
All Materials
440 & 2440 Edgers
129-1192 Rough Brazed
129-1193 Rough W/Holes 19mm
Trivex 60G
Sentilles
129-3160 FV4 Angle
16mm
Glass
129-5190 FVF Hab Rimls
19mm
Glass
Santinelli International proudly introduces the
new, highly-advanced SE-9090 Supra
Industrial Lens Edger. The company has taken
its previous industrial lens edger model, the
SE-9090, known globally for unprecedented
quality, polish and reliability, and taken it to a
whole new level of high performance and
Santinelli International’s Lex 1000 Lens Edger capability.
is engineered with the most advanced tech- With the addition of newly-developed, pinnology available on the market. Its unique point accurate grooving technology, labs can
functions enable eyecare professionals to now benefit from quality finished grooved
confidently handle even the most challenging lenses with exclusive Crystal Cut™ high luster
polish quality and polish safety bevel.
jobs in-house to increase profits:
159-7182
INDOMATIC-AITMaxima(3&4whl-70/ D110-B25)
AIT (R146/F153-B25.4)
MARK IV, V, DX, AL, & Dimension One
101-0150
101-0210
101-1150
101-1151
101-1152
101-5150
101-3150
101-3210
Rough MIV&V
Rough MIV&V
Rough MV
Rough MV
Rough Braze MV
FV4 Angle
MK IV Flat Finish
MK V FV4Angle
15mm
Glass/Plastic
21mm
Glass/Plastic
15mm
Glass/Plastic
15mm
All Materials
15mm
Glass/Plastic
15mm
Glass
21mm
Glass/Plastic
AIT GRAND MARK 600. 661 (D146/154-B38)
Rough21mm
Rough Brazed
Rough W/Holes
FV4 Angle B31.75
Rough
16mm
Rough Brazed
16mm
Rough
19mm
Rough W/Holes
19mm
Rough Brazed
19mm
Rough Brazed
30mm
FVF Hab Rimls
16mm
FVF Flat Rimles 16mm
PVFHab Rmls Polish 16mm
PVF Hab 112V
32MS
PVF Hab 120V
32MS
PVF Hab V F22/P22 44MS
Glass/Plastic
Poly/Plastic 60G
Glass/Plastic
Trivex 60G
Poly/Plastic 60G
Poly/Plastic 60G
Glass V 4.7in
All Lens V 4.7in
Fin Pol V 4.7in
F16&P16 V 4.7in
F16&P16 V 4.7in
F&P V 6.7in
HOYA - ACCEL & AE3000
All
M a t e r i a l s 143-1160
21mm Poly/Plastic 60G 143-1163
21mm
Trivex 60G 143-1183
21mm
Glass/Plastic 143-7401
Contact Santinelli International about the
143-7441
extensive number of system configurations ES-4 industrial finishing and drilling. The ES-4 AIT-OPTI-VUE (R146.8/F153.4-B25.4)
ESSILOR
can handle the most delicate lenses, but built 159-1210 Rough
21mm
Glass
available with the Lex 1000 Edger.
for 24/7/365 operation, it provides the ultimate 159-3181 FV4 Angle 117V 18mm
Glass PART#
Rough
Rough W/Holes
Rough W/Holes
FPVF FinV/Pol
FPVF FinV/Pol
104-1210
104-1212
104-1213
104-3210
140-1160
140-1162
140-1192
140-2193
140-2192
140-1302
140-3160
140-3161
140-7161
140-7320
140-7321
140-7440
16mm
16mm
18mm
40MS
44MS
(120)
MBA, MBX, MBS
OPERATION
WIDE
Glass
Trivex 60G
Trivex 60G
F20 /P20
F22 /P22
MATERIAL
10/12/11 11:00 AM
EDGERS
137-1160
137-1200
137-1162
137-1202
137-3160
137-3240
137-5200
Rough
Rough
Rough Brazed
Rough Brazed
Special”V” Bevel
Hab-RIimles
16mm
Glass/Plastic
20mm
Glass/Plastic
16mm Poly/Plastics 60G
20mm
Poly/Plastics
16mm
Glass/Plastic
24mm
Glass/Plastic
20mm
Glass/Plastic
172-7152 Special V 4 Angle 15mm Polish All Lens
172-3180 Special V 4 Angle 18mm
Glass
All Lens
Glass
All Lens
172-7202 Special V 4 Angle 20mm Polish All Lens
Glass
NOVAMATIC -TAKUBOMATIC (4 Wheels)
Glass
148-1180 Rough
18mm
Glass 172-3251 Special V 4 Angle 25mm
All Lens
148-1183 Rough W/holes 18mm
Trivex 60G Following are Matched Sets Finish & Polish
148-1220 Rough
22mm
Glass/Plastic 172-7301 Finish /Polish Flat 30MS Set15FinF/15PolF
172-7302 Special V 4 112 30MS Set15Fin/15Polish
148-1221 Rough
22mm
All Lens
172-7303 Special V 4 Angle 30MS Set15Fin/15Polish
22mm
Trivex 60G
Glass 172-7351 Special V 4 Angle 35MS Set20Fin/15Polish
148-3141 V Bevel Flat Rimles 14mm
All Lens 172-7352 Special V 4 112 35MS Set20Fin/15Polish
148-3181 Spec-V Hab Rimles 18mm
Plastic/Glass 172-7401 Finish /Polish Flat 40MS Set20FinF/20PolF
All Lens 172-7402 Special V 4 112 40MS Set20FinV/20PolV
172-7403 Special V 4 Angle 40MS Set20FinV/20PolV
SANTINELLI -NIDEK*(&TOPCON ALE3700)
(100) LE7070, 8000, 8080, LE900SX &
ALE3700
157-1120
157-1122
157-1123
157-1170
157-2172
157-1173
157-1221
157-1230
157-1236
157-1233
159-1222
159-1223
157-3171
157-3230
157-3231
157-7171
157-7357
159-3181
159-7181
Rough
Rough Brazed
Rough W/holes
Rough
Rough Brazed
Rough W/Holes
Rough
Rough
Rough Brazed
Rough W/Holes
Rough Brazed
Rough W/Holes
Special V 4 Angle
Special “V”
Special V 4 Angle
Special V 4 Angle
Special V 4 Angle
12mm
Glass
12mm
Trivex 60G
17mm
Glass
17mm
Poly/Plastics
17mm
Trivex 60G
22mm
All Lens
23mm
Glass
23mm
Poly Plastics
23mm
Trivex 60G
22mm Poly/Plastic NID9090
22mm Trivex 60G NID9090
17mm
Plastic/Glass
23mm
Glass
23mm
Poly/Plastics
17mm
Polish Wheel
35MS Set 17Fin/17Polish
18mm Poly/Plastic NID9090
18mm Polish Whl NID9090
INGOH - OMI / HELBRECHT138
154-1161
154-1162
154-1163
154-3161
154-3181
154-5180
Rough
Rough Brazed
Rough Brazed
Hab-RIimles
16mm
16mm
16mm
16mm
18mm
18mm
Plastic/Glass
Poly/Plastics
Poly Only
Plastic/Glass
Plastic/Glass
Glass/Plastic
WECO - Rougher W/Steel Hub & 2PC V SERIES
88, 463, 486A, 486B,4 40, 2440 (110-B20)
Replacement Parts for WECO 440
and 486 Edger
Sentilles
Hande 307 Traditional Hand Edger
WM093 Diamond Hand Edger
A.I.T. Industries
OWC
A peripheral-type hand edger with optional
grit-sized wheels for pin beveling or reshaping
for plastic or glass. Extra-sturdy hand rests for
simple operator control. No-spray wheel
guard, precise heavy-duty ball bearing motor.
11”h x 15”w x 16”d (27.9cm x 38.1cm x
40.6cm). 120V, 60Hz. Includes drain hose,
coolant pump and tank with 100 liners; w/1” x
8” (2.5cm x 17.8cm) straight diamond wheel.
Compact, lightweight, powerful. Durable plastic housing. No plumbing or installation
required. Reversible wheel revolution. Bonded
diamond wheel. 8-1/2”w x 14”d x 11”h.
17.5lbs. 120V/60Hz.
Industrial Diamond Hand Edger
PSI
A00307N w/H.B. Groove
Belrose Diamond Hand Edger
Belrose
WECO edgers last with routine maintenance
and occasional repairs. Parts available for
your Weco 440 and 486 by referencing your
OEM manual’s part number, or call for assis- Brand new all materials high quality edger for
tance. We also do panel repairs.
glass, CR-39, polycarbonate and high index.
Includes total 35mm wide wheel. 16mm right
Replacement Parts for WECO 463
side roughing wheel of 180 grit and 19mm left
side finishing wheel with a 320 grit with
Edger
groove. All self-contained with drip tank and
Sentilles
reversible switch to change wheel direction
for polycarbonate use. Durable and powerful
for years of use. A great value!
170-1151 Rough
170-2220 Rough W/UC
170-9100 V Bevel Stl 2PC
Special V -Stl 2PC
170-3180 Special V -Stl 2PC
170-7151 Special V 4 Angle
15mm
Plastic
22mm
Glass/Plastic
10mm Glass/Plastic170-3150
15mm
Glass/Plastic
18mm
Glass/Plastic
20mm
Glass/Plastic
22mm
Glass/Plastic WECO edgers last with routine maintenance
15mm
Polish Wheel
and occasional repairs. Parts available for
ALLwecoEDGERS & COBURN IQ EDGER
your Weco 463 by referencing your OEM
461, 463, 486, 440, 2440,CT90&91, ZET90&91
manual’s part number, or call for assistance.
PART#
OPERATION
WIDE
MATERIAL We also do panel repairs.
172-1150 Rough
15mm
Glass Contact Sentilles for current pricing.
172-1151 Rough
15mm
All Lens
Diamond Hand Edgers
172-1153 Rough W/Holes 15mm
Trivex 60G
172-1180 Rough
18mm
Glass
172-1181 Rough
18mm
All Lens
Hand Edger
172-1183 Rough W/holes 18mm
Trivex 60G
A.I.T. Industries
172-1184 Rough Braze
18mm
Poly/Plastics
172-2180 Rough W/UC
18mm
Glass
172-2181 Rough W/UC
18mm
Plastic/Glass
172-2182 Rough Braze
18mm w/uc Poly/Plastic 60G
172-2200 Rough W/UC
20mm
Glass
172-1220 Rough
22mm
Glass/Plastic
172-2201 Rough W/UC
20mm
Pall Lens
20mm w/uc Poly/Plastics
172-1200 Rough
20mm
Glass
172-1201 Rough
20mm
All Lens
20mm
Poly/Plastics
172-1203 Rough W/holes 20mm N/UC Trivex 60G
172-1220 Rough W/UC
22mm
Glass
Bonded diamond wheel hand edger for small
22mm
Glass
finishing labs. Space-saving compact unit.
172-1381 Rough
38mm
All Lens
Powerful 1/3hp motor. Constant fresh coolant
ALLweco & COBURN IQ EDGER
flow. Choice of 600 grit bonded or split grit
461, 463, 486, 440,2440,CT90&91, ZET90&91
diamond wheel. 11”h x 9-3/4”w x 13-1/2”d.
172-7106 Flat Polish No V 10mm
All Lens 120V, 60Hz.
Glass/Plastic 01920 Electroplated
172 -3151 Special V 4 Angle 15mm
All Lens 01920-1 Single Grit Dia. Wheel
172-6150 Flat-Rimles No V 15mm
Glass 01920-2 Dual Mesh w/groove
172-6151 Flat-Rimles No V 15mm All Lens Finish 01920-4 Dual Grit Dia. Wheel
172-7156 Flat Polish No V 15mm Polish All Lens Contact A.I.T. Industries for current pricing.
21
PSI’s Industrial Diamond Hand Edger features
an upgraded motor (1700 rpm) and a durable,
heavyduty housing. This European-made unit
has a 6” bonded, dual grit diamond wheel,
which can be retrued.
HEM300 Industrial Diamond Hand Edger
Mini Hand Edger
PSI
NH-35WV Introductory Price . . . . . . . . . . . . . . $495.00
NT-BR Diamond Hand Edger
Optical Machinery
The mini hand edger is space saving, ergonomic and economical. The angled bevel
wheel allows for precise beveling. No belts for
low maintenance. Is quiet running and mess
free; no drain hose required.
Item NH-100
Simple to use. Rust and corrosion proof.
Always-clean coolant. New smoother-running,
hi-torque motor uses 1/3 less electricity. 15” x
10” x 12”. 110V, 60Hz, and 230V, 50Hz.
Replacement wheels available
PSI Diamond Hand Edger
PSI
Diamond Hand Edger
OWC
PSI’s Diamond Hand Edger is an ergonomically designed edger for use on all plastic lens
materials. Its corrosion proof plastic housing
is extremely durable. The edger is designed to
provide a continuous flow of fresh water to the
wheel. Unit comes with a lighweight bonded,
600-grit, 4” wheel that is available with or
without a bevel. 100-120V/60Hz. (220V/50Hz
available). Machine comes with a one-year
warranty. 11”H x 8.5W x 14”L, 18lbs.
Satin-smooth, chip-free finish. Cooled by air
duct system. Rigid mounting in heavy-duty
cast aluminum casing with removable top. No
vibration. Very quiet, with illuminating switch.
095 With 1” (2.5cm) wheel. 095 With hide-a- 1245CH
bevel wheel.
1245CHBV(bevel wheel)
10/12/11 11:01 AM
22
EDGERS
Diamond Hand Edgers
Hand Edger with Sensor
Santinelli
12”H x 17”W x 13”D. Weight 30 lbs w/resin
bond wheel: or 33 lbs with Brass bond wheel.
MC and Visa Accepted. Some examples of
wheel grit listed below. Other wheel grits are
available.
Optional
Re-circulating Coolant Supply Kit
With 1.50” wide x 6” dia. Wheel
HAND EDGER Single Grit Brass Bond Wheel
2001-10 600 Flat GL/PL
2001-11 400 or 600 HAB
HAND EDGER Single Grit Resin Bond Wheel
2001-20500Flat PL/PLY
2001-21 325 or 500 HAB
Our new Hand Edger is equipped with a special sensor that detects the operator’s proximity, triggering the diamond wheel to automatically start rotating. Conversely, the diamond
wheel is idle when no movement is detected.
This unique design ultimately saves energy
and extends the life of the product. The diamond wheel is a dual grit with an H.A.B. profile
for bevel touch-up / handwork. The unit has
self-contained water recirculating system,
which keeps the water clean through a filter
and avoids the risk of water pump blockage.
Depending on the amount of water needed,
water can be delivered to the diamond wheel
by utilizing the water valve. The built in
sponge eliminates any water overspray. The
water tray can be easily removed for periodic
maintenance.
Diamond Hand Edger 201
Sentilles
HAND EDGER Dual Grit Brass Bond Wheel
2001-13 325F/500V PL/GL
HAND EDGER Dual Grit Resin Bond Wheel
2001-23 325F/500V PL/PLY
6.5-1-.5-FF-B-400 6.5 INCH, FLAT, 400 GRIT
6.5-1-.5-FV-B-120-600 6.5 INCH, BEVEL, 600 GRIT
6-1.5-1-FF-B-1000 6 INCH, FLAT, 1000 GRIT
6-1.5-1-FV-B-120-400 6 INCH, BEVEL, 400 GRIT
Resin Bonded Wheels (for poly/plastic)
6-1.5-1-FV-RB-120-6.3-3.4-180 6 INCH, BEVEL, 180
GRIT
6-1.5-1-FV-RB-120-6.3-3.4-180/400 6 INCH, BEVEL,
DUAL GRIT 180 / 400
6-1.5-1-FV-RB-120-6.3-3.4-180/400 6 INCH, BEVEL,
DUAL GRIT 180/400
6-1.5-1-FV-RB-120-6.3-3.4-400 6 INCH, BEVEL, 400
GRIT
6-1.5-1-FV-RB-120-6.3-3.4-600 6 INCH, BEVEL, 600
GRIT
6-1.5-1-FV-RB-120-6.3-3.4-600 6 INCH, BEVEL, 600
GRIT
6-1.5-1-FV-RB-120-6.3-3.4-800 6 INCH, BEVEL, 800
GRIT
HAND EDGER Dual Grit Brass Bond Wheel
2001-13 325F/500V PL/GL
HAND EDGER Dual Grit Resin Bond Wheel
2001-23 325F/500V PL/PLY
Edge Polishers
Automatic Lens Edge Polisher
A.I.T. Industries
Diamond Hand Edger—SureEdge
Sentilles
Dual Hand Edgers
WD90 Dual Hand Edger
OWC
Can automatically polish CR-39, polycarbonate, hi-index and glass lenses. Polishes both
rimless and beveled lenses. Rugged and
durable, built to provide years of trouble-free
service. Comes with 1/4hp direct-drive motor
which eliminates stopping or stalling of buffer
wheels. 11”h x 13-1/2”w x 10-1/2”d. 22lb.
115V.
Compact design with a smooth ABS-High
Impact Material that is easy to clean.
SureEdge unit is belt driven with a 1/3 HP
motor, very quiet and virtually vibration free.
Coolant tray mounts on top with an adjustable
01909
drip spout. Wheel is a Retruable, Brass
Bonded with a Dual Grit– 20 mm wide smooth
Belrose Automatic Polisher
grit on the left side with a V groove and a 15
Belrose
mm rougher grit on the right side. This dual
grit wheel gives the ability for all lenses to be
Self-contained
dual
hand
edger.
Heavy
duty
finished, even polycarbonate. Mastercard and
Visa Accepted. Size: 15”D x 11.5” H x 9” W unit with easy-to-clean. Diamonds are available in several different configurations. Units
Electrics: 120V 60HZ Weight: 25 Lbs.
are also available with single diamond.
8135 SureEdge Diamond HE 35mm Single grit Flat
Wheel 100mm (4”)
8135-1 SureEdge Diamond HE 35mm Single Grit HAB
100mm (4”)
8135-2 SureEdge Diamond HE 20mm-500 V /15mm
250F Dual Grit 100mm (4”)
Hand Edger-Sure Hande Heavy Duty
Sentilles
Width: 12” (30.5cm)
Depth: 20” (51 cm)
Height: 11” (28 cm)
Weight: 47 lbs (21.5 kb)
Electrical: 115 Volt, 4Amp, Single phase
Provides satin smooth edge using quiet yet
Diamond Hand Edgers 2001—(W /
powerful 1/3hp motor adequately ventilated.
Resin Bond Or Brass Bond Retruable
Rust-free ABS case with large footprint for
stability and rounded corners for safety. Wide
Wheels)
front work table provides comfortable handSentilles
rest for user. Stainless steel wheels that eliminate rust pitting with flat (180, 220, 360, 600 or
1,200 grit) or HAB (360 or 600 grit) surfaces
measuring 1-1/2” across face. Re-Truable,
Bonded Wheels also available. Call for assistance in selecting best grit for your application. 12”h x 17”w x 13”d, 28lb. 115V/50Hz, The traditional, high speed, heavy duty for
single phase.
precision hand edger performance. Large
hand rest table for extra steadiness to allow
operator to go left or right without obstrucDiamond Hand Edgers 2001—(W /
Resin Bond Or Brass Bond Retruable tion. Has 1”w x 7”d bonded diamond wheel.
Size: 11”h x 15”w x 16”d. Weight: 47lbs.
Wheels)
Retruable bonded diamond wheels provides
Electrics: 120V, 60Hz, 5.8 AMP.
Part #307-0
longer wheel life. Resin Bonded wheels are
Sentilles
“great for Polycarbonate, High-Index and
CR-39 lenses. Brass Bond wheels are for
Hand Edger Machine
Glass, CR-39 and Hi-Index lenses. Either
Superabrasive, Inc.
Bonded wheel is retruable and rust free.
Edger has provided years of dependable service in wholesale labs and professional offices. Edger is supplied with coolant tray that
provides fresh clean coolant, or the optional
re-circulating coolant pump system can be
supplied. The housing is constructed of durable heavy wall white ABS plastic with a wide
front shelf which provides for a comfortable
Retruable bonded diamond wheels provides
hand rest to reduce operator fatigue. Powered
longer wheel life. Resin Bonded wheels are
by a 1/3 hp motor, 110 or 220v 50/60 HZ. Size
“great for Polycarbonate, High-Index and
12”H x 17”W x 13”D. Weight 30 lbs w/resin
CR-39 lenses. Brass Bond wheels are for Superabrasive offers a heavy duty hand edg- bond wheel: or 33 lbs with Brass bond wheel.
Glass, CR-39 and Hi-Index lenses. Either ing machine and a wide variety of hand edg- MC and Visa Accepted. Some examples of
Bonded wheel is retruable and rust free. ing wheels. We also offer a full line of diamond wheel grit listed below. Other wheel grits are
Edger has provided years of dependable ser- wheels for all popular edgers, generators and available.
vice in wholesale labs and professional offic- groovers. Our metal bonded wheels feature
es. Edger is supplied with coolant tray that the thickest diamond layer in the industry and Optional
Re-circulating Coolant Supply Kit
provides fresh clean coolant, or the optional provide a great performance and long tool life.
re-circulating coolant pump system can be Redressing/retruing service is also available. With 1.50” wide x 6” dia. Wheel
supplied. The housing is constructed of dura- For pricing and specials, please call 800-987- HAND EDGER Single Grit Brass Bond Wheel
2001-10 600 Flat GL/PL
ble heavy wall white ABS plastic with a wide 8403 or email to [email protected].
2001-11 400 or 600 HAB
front shelf which provides for a comfortable HEM 300 HAND EDGER MACHINE (comes with a free HAND EDGER Single Grit Resin Bond Wheel
hand rest to reduce operator fatigue. Powered resin bond wheel)
2001-20500Flat PL/PLY
2001-21 325 or 500 HAB
by a 1/3 hp motor, 110 or 220v 50/60 HZ. Size Metal Bonded Wheels (for all materials)
Brand new and designed for all materials to
include glass, CR-39, polycarbonate and high
index lenses. New design with “soft touch”
switches includes timer switch. A clear
machine hood allows for continual inspection
of lens polishing while reducing noise and
aids dust collection. Durable, compact and
high quality.
NH-900 Introductory Price . . . . . . . . . . . . . . . . $450.00
OM-81 Buffer For Plastic Lenses
Optical Machinery
Ideal unit for touching up plastic lenses quality stainless steel housing. 9”h x 10”w x 10”d.
10lb. 110v.
Double Spindle Bench Polisher
OptiSource
This high powered double spindle bench polisher features a sturdy design, adjustable
speed and an easy-clean plexiglass shield.
Heavy duty rubber feet assist in vibration-free
operation. Replacement Parts are available.
32-POLISHERHAND
10/12/11 11:01 AM
EDGERS
Edge Polishers
Fully Automatic Lens Polisher
OptiSource
23
for mounting to bench
not messy liquid polish. Size: 11”h x 13.5”w x
Belrose Automatic Groover
• Motor _ Hp 120 VAC 3600 RPM 4A
10.5d. Weight: 26lbs. Electrics: 220V. Part
Belrose
#8361.
• Extra long ball-bearing supported precision
machined shafts
Polish Bars
• Cast iron base for reduced vibration
• Easy access on/off switch
Sentilles
• CSA listed
Part#8020
Shipping weight: 25 lbs
Lens Edge Polisher
Sentilles
This high-powered, Automatic Lens Edge
Polisher will allow you to polish your lenses
with ease. All you do is insert the lens, set the
timer, and watch it go. Our Automatic Lens
Edge Polisher automatically rotates the lens
for an even polish. It is a user-friendly unit that
takes only a few minutes to learn. A timer may
be used for different lens materials, allowing
the user to step away from the machine. The
Automatic Lens Edge Polisher can polish
CR-39, High-Index, and Glass Lenses to a
high luster. It’s powerful direct drive design
eliminates broken or slipping drive belts.
Automatic Lens Edge Polisher includes a
clear plastic hood for inspection of the lens
polishing and reduces noise and dust. The
Automatic Lens Edge Polisher is a complete
kit consisting of three different polish pads, an
accessory exhaust and a polishing stick.
Replacement Parts are Available.
Brand new high quality groover suitable for
both glass and plastic lenses. Has adjustable
Edge polish for plastic, polycarbonate or high- groove position (front, central and rear).
index lenses. 1.5oz each.
Adjustable groove depths from 0 - 0.7mm.
1-1002 Polish Bar, Regular for High-Index
Accurate on all profiles with a groove width of
1-1101 Polish Bar, Regular for Plastic
0.65mm and lens thickness from 1.5mm to
1-1102 Polycarbonate
11.0mm. Accommodates lens blanks from
18mm to 70mm. Durable construction of noncorrosive material. A great value!
Polish Pad
NH-800AT Introductory Price . . . . . . . . . . . . . . $650.00
Sentilles
Produces high polish for facet or rimless, very
quiet, simple to operate and efficient - it uses
long-lasting felt pads - use both sides of the
pad and save money! Easily adaptable for
polishing frames, too. 9”h x 9.5”d x 9”w,
22lbs, 110V/AC. #9200 Lens Edge Polisher
#9200-101 Polishing Pad Felt #9200-111
Polish for CR-39 #9200-112 Polish for
Hi-Index #9200-121 Polish for Polycarbonate.
Auto Groover
Dynamic Labs, Inc.
Lens Polisher - Surepolish Automatic
Sentilles
32-POLISHERAUTO
Virgin wool 100% polish pads fits Klearedge
Polish Bars
and other facet type polishers. Pad is 6” diameter with 7/8” center hole.
PSI
#1-1001
Polycarbonate Edge Polish
Sentilles
Specially designed diamond cutting wheel for
smooth grooving. Small 12mm B measurement chucks allow easy half eye grooving.
Adjustable setting for groove depth.
Adjustable lens guide. Detachable table for
easy cleaning. 1 year limited warranty on parts
and
labor. . . . . . . . . $395.00 bulk pricing also available
Master this easy-to-use auto polisher. Only
takes a few minutes to polish plastic lenses,
including polycarbonate, hi-index, and even
polishes glass. Powerful direct-drive design
PSI polish bars are made of high quality dry eliminates problems associated with beltpolish to produce clear shiny edges.
driven units. Uses dry polish, not messy liquid
2503 for plastic
polish. Specs: 11”H x 13.5”W x 10.5”D Weight:
2504 for polycarbonate
26 lbs. Electrics: 120V.
2505 for high index
NT-GR Groover
Optical Machinery
PART #8140
All Lens Polish Bar
LENS POLISHER MANUAL
Sentilles
Sentilles
LENS POLISHER MANUAL - ANGLED HEAD
Liquid concentrate used to polish dull or
frosted polycarbonate lens edges. Sparkling
edge can be achieved in seconds by hand–
simply wipe on with applicator, dries in secAngled head design provides for operator
Availiable with either a bonded wheel for glass
comfort. Dual flat pads form a 90 degree angle onds to a high gloss. Will not peel. 16oz.
grooving, or a plated wheel for CR-39,
in a horizontal circular rotation that gives 1-2102-16
Polycarb, and Hi-Index.
operator full control to polish rimless or bev- Contact Sentilles for current pricing.
eled edge to a brilliant luster. Comes with the
SOS ALL LENS polish bar used for all lens
Automatic Lens Groover
Groovers
materials. Felt Pad is reversible for longer
use.
OptiSource
Automatic Groover
110V 60 Hz 2.5A SIZE 8.75” x 9.75”H
One edge polish for plastic, polycarbonate or
high-index lenses. Replace 3 different polish # 8145…. Lens Polisher Manual - w/ 2.5” Felt
bars with our new ALL LENS™ Polish bar. Part on top of 6” Flat Felt pad.
# 1-1112.
BUFFER /POLISHER
A.I.T. Industries
Lens Polisher-Surepolish Automatic
Sentilles
Sentilles
Small,
compact,
easy-to-use
automatic
groover with adjustable depth setting and
groove placement. With this unit inexperienced operators are able to groove lenses
Heavy duty 6” Buffer, with extra long ballbearing supported precision machined shafts.
Comes with two buffing wheels and one ALLLens Polish Bar. Has four 3/8” mounting holes
Master this easy-to-use auto polisher in a few
minutes. Polish plastic lenses, including polycarbonate, hi-index, even glass. Powerful
direct-drive design eliminates problems associated with belt-driven units. Uses dry polish,
quickly and accurately with little error. 6”h x
6-1/2”w x 8-1/4”d. 8lb. 110V.
01921
This fully Automatic Lens Edge Groover
EASILY creates the groove necessary to
mount lenses onto a semi-rimless frame. The
adjustable, precise controls on the Lens Edge
Groover allow the user to create the exact
groove required. The grooving disk is safe for
use on Plastic, Glass, and Polycarbonate
Lenses. The depth of the groove is EASILY
adjustable from 0 to 0.7 mm.
32-GROOVERAUTO
10/12/11 11:01 AM
EDGERS
24
Groovers
Automatic Groover Accessories
Groover Wheels for Wide Grooves
Sentilles
Sentilles
Auto Groover
OWC
Half Eye Chucks and new clear rubber pad
allows for most 1/2 eye sizes or a narrow 14
mm lens to be grooved. The clear pad regular
Auto Groover with easy and accurate groove
size fit the standard chuck most groovers are
placement. Water well has a drain to prevent
equipped with. Press pad into chuck recess.
rusting of diamond cutter and armature parts.
Call for other groover parts.
6”h x 9”d x 7”w. 5lbs. 110V.
M098
PSI Auto Groover
PSI
161-G-36L Pad Clear 1/2 Eye—Small Left
8161-G-26N Pad Clear Reg. Chuck—L & R
8161-G-36R Pad Clear 1/2 Eye –Rect. Right
8161-G-40 Chuck & Pad 1/2 Eye SA–Set L & R CALL
Groover Wheel Bonded Diamond
Sentilles
Some newer specialty frames and titanium
frame require a wide groove. These wheels
cut a groove 0.8 mm or 1.1 mm wide to
accommodate these frames. Wheels fit: AIT,
Briot,Coburn AG5, Nu-tec Grooverite,
Novamatic Groovemaster, SOS Shurgroove,
Takubomatic and other, similar groovers that
require an angled wheel. MasterCard and Visa
Accepted. Wide Wheel for DIMELP/
Edgemaster Auto-Groover and Manual
Groovers.
69-0011 Wide groove Solid, Flat, 1.1 x 20mm
69-1008 Wide groove Solid, Angled, 0.8 x 25mm
69-1011 Wide groove Solid, Angled, 1.1 x 25mm
69-5011 Wide groove Slotted, Angled, 1.1 x 25mm
Suregroove XL Auto Groover
Sentilles
PSI’s Auto Groover is for plastic and polycarbonate lenses. It features variable groove
positioning with center, front and rear lens
reference points. The depth and location of
the groove are easily adjusted. This groover is
easy to learn and use. Includes an all-purpose Bonded diamond wheel, to fit SOS
cutting wheel and half-eye chucks. One year Shurgroove, Nu-Tec Grooverite, Novamatic
Groovemaster, Briot, Coburn A G-5, AIT,
warranty. 6”H x 8”W x 10.5”D, 6 lbs.
NH-800
Takubomatic groover and other similar
groovers that require an angled wheel. These
Auto Groover-Rebuilt
wheels are used by the high volume laboratory as well as the professional dispensing This simple-to-use unit allows even an inexSentilles
labs.
perienced operator to cut perfect grooves.
#69-1223 Groover wheel solid, angled 25mm Bonded
Grooves both glass and plastic lenses.
Wheel
Follows the contours off hi-plus lenses with
ease. 6”H x 6.5”W x 8.25”D, 110V.
Groover Wheels for All Models
#8181
Sentilles
This completely rebuilt simple-to-use unit
allows even an inexperienced operator to cut
perfect grooves. Grooves both glass and
plastic lenses. Follows the contours of highplus lenses with ease. Size: 6”h x 6.5”w x
8.25”d. 110V.
#8161R
Auto-Groover - Suregroove Xlt And
Deluxe Model
Sentilles
These simple-to-use groovers allows even an
inexperienced operator to cut perfect
grooves. Grooves both glass and plastic lenses. Follows the contours of hi-plus lenses with
ease. Process time, one revolution of lens
about 40 seconds. Will groove up to a 70 mm
diameter Lens and 11 mm thick. Adjustable
depth of groove up to 0.7 mm. Regular solid/
angled wheel supplied with either Groover.
Electrics: 115V 50/60 Hz.
Other Wheels Available: Slotted Or Wide Groove
PART #8150 Suregroove Deluxe (Weight: 8 Lbs Size:
6.5H x 7W x 9.25D (.93A)
PART #8180 Suregroove XLT (Weight: 6 Lbs Size 6H x
6.5W x 8.25D (80W)
Diamond wheels available for all lens
groovers: Novamatic, Labcraft, Nu-Tec,
Santinelli, Dimelp, Coburn, Briot, Logo, Rainyl,
Etc. Plated wheel sizes are 20 mm or 25 mm.
Flat/solid or angled/solid and slotted/angled
cutting edges. Slotted wheels produce less
friction and heat build up , especially with
Polycarbonate lenses. We have wide groove
plated wheels for some of the newer Titanium
and other frame styles that require a wider
groove of .8 mm or 1.1 mm these are 25 mm
only and have solid/angled cutting edge. A
brass bonded re-truable wheel is available, 25
mm with a solid /angled cutting edge. Please
call for assistance for proper wheel selection.
Manual groovers and Dimelp/Edgemaster
Groover requires a flat wheel. VISA and MC
Accepted.
69-0013 Solid, Angled, 55x20mm
69-0023 Solid, Angled, 55x25mm
69-0033 Solid, Flat, 55x20mm
69-0043 Solid, Flat, 55x25mm
69-0050 Solid, Flat-Course for Poly, 55x20mm
69-0223 Solid Angled Bonded, 55x25mm
69-5013 Slotted, Angled, 55x20mm
69-5023 Slotted, Angled, 55x25mm
10/12/11 11:01 AM
EDGERS TOOLS & SUPPLIES
LEAP™ Pads
Blocks/Block Chuck Pads
BPI
Slip-Stop Guards
A.I.T. Industries
3M Leap Pads
Slip-Stop Guards serve a dual purpose, protecting the inside of lenses from scratches
and helping to avoid off-axis slippage while
edging. A wise investment for all labs to
reduce spoilage, especially on high-cost lenses.
42114 Roll of 1,000
Sure Grip LEAP™ Pads
79801 3M 1701 24mm square pads
79802 3M 1700 24mm square pads
79893 3M Blue Chip Lens Protectors
79894 M Antislip Disc 24 x 44mm
79895 1693M
79896 1695M 24mm round pads
79897 1696M pads 18 x 28mm
79898 BPI Half eye Blocking Pads
79899 BPI Blocking Pads 18mm
79900 BPI Blocking Pads 24mm
1682CO Coburn Blocking, Box of 50, 80320-00
1682CO Coburn Blocking, Individual, 80320-10
1682ST Semi-Tech Blocking, Box of 50, 80320-03
1682ST Semi-Tech Blocking, Individual, 80320-31
Regular Blocks: 4 to 10 Base Curve
1678A A.I.T. Blocking, Box of 50, 80245-02
1678A A.I.T. Blocking, Individual, 80245-21
1678CO Coburn Blocking, Box of 50, 80245-00
1678CO Coburn Blocking, Individual, 80245-10
1678ST Semi-Tech Blocking, Box of 50, 80245-03
1678ST Semi-Tech Blocking, Individual, 80245-31
A.I.T. Industries
Blocking Dots/Edging Mask
DAC Vision
SECUREDGE™ PLUS HYDROPHOBIC
AR BLOCKING PADS
Protective finish blocking dots.
Coburn
DVEM-4 Edging Mask for advanced hydrophobic coatings, 2m/roll
DVEM-6 Edging Mask for advanced hydrophobic coatings, 2m/roll
STBD-1 1.25” Blue 1,000/roll
STBD-3 1.5” Blue 2,000/roll
STBD-4 1” Blue 2,000/roll
STBD-5 1.5” Clear 2,000/roll
STBD-6 1” Clear 2,000/roll
BluEdge™ Finishing Pad
3M ANTI-SLIP DISC
Coburn
25
SecurEdge Plus blocking pads are specifically
designed for super hydrophobic AR lenses.
The pads offer a reinforced material with
exceptional resistance to rotational forces.
Microcellular foam core for improved torque
and conformability to curved lens and block
surfaces. Differential adhesive system with
the lens adhesive clearly identified, without
the need for additional base pads.
DAC Vision
300921
24 mm, round (2000/roll)
3M has developed a special Anti-Slip Disc to 300931
Provide extraordinary holding power at a fracwork in conjunction with 3M Leap III finish 18 mm, round (1000/roll)
tion of the cost
300941
blocking pads for AR lenses.
42099 Roll of 2,000
42121 Roll of 1,000
301231
3M Anti-Slip Disc 1705 (500)
Adhesive Blocking Pads
3M BLUE CHIP LENS PROTECTORS
Belrose
Coburn
14 x 18 mm, semi round (1000/roll)
300951
24 mm, square (2000/roll)
300961
20 x 25 mm, Vario half eye (1000/roll)
301211
26 mm, round straight sides (2000/roll)
301221
20 x 30 mm, oval (2000/roll)
BluEdge™ has a unique high strength, high
density blue carrier that offers improved performance for today’s longer processing times.
Its specially designed adhesive offers superior lens side and block side performance.
DV-170 24 mm Round, Center Hole
DV-171 24 mm Round, Solid Center
DV-172 18 mm Half-Eye, Center Hole
DV-173 18 mm Half-Eye, Solid Center
Vario Blocks
Coburn
DV-176 17 mm Oval, Solid Center
Finish block which conforms to all types of
front curves to maximize adhesion. Especially DV-181 26 mm Round, Solid Center
These 35 mm round discs are designed to good with PALs. 2001-3223 Large; 2001-3224 Contact DAC Vision for current pricing.
protect lenses from scratching on the front Half-eye.
Faceting Circles
Superior non-slip, positive, adhesive Blue- and backside surfaces.
DAC Vision
blocking pads. Credit cards accepted.
301241
1,000/roll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39.95
1647* Blue Chip Lens Protectors (2000) . . . . . . $51.00
1676U 3M Blocker only. . . . . . . . . . . . . . . . . . . $248.00
1678* 3M Reg. Base Blocks (box of 50) . . . . . . $79.00
1680* 3M starter kit-includes blocker, deblocker, 20
reg base blocks, 2 low & high base blocks and #1701
pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $344.00
1682* 3M Low Base Blocks (box of 20) . . . . . . . $59.00
1683* 3M High Base Blocks (box of 20) . . . . . . $59.00
1692 3M Leap II Pads-26mm (1000/round for use with
WECO Flexible Blocks) . . . . . . . . . . . . . . . . . . . . $99.00
1693 3M Leap II Pads-18mm (1000/round for use with
Essilor Gama Edgers) . . . . . . . . . . . . . . . . . . . . . $83.00
1695 3M Leap II Pads-24mm (2000/round) . . . $119.00
1700 3M Leap II Pads-24mm (2,000/square). . . $99.00
1701 3M Leap II Pads-24mm (1,000/square). . . $56.00
*specify type A, S, ST, or CO
Flexi-Blocks for Edgers
BPI
3M LEAP III PADS
Blocking Discs/ Edging Pads
SecurEdge™,
Leap III and Economy Blue
Coburn
DAC Vision
3M Blue Chip Protectors (2000/roll)
Safeguard your lens investment with 3M Leap
III finish blocking pads. 3M Leap III pads
provide an adhesive strength that reduces SecurEdge™
slippage so labs can experience fewer errors DV-140 24 mm Round, Center Hole
and less waste.
301411
18 mm, 1693M Leap III, round (1000/roll)
301421
18 x 28 mm, 1696M Leap III, oval (1000/roll)
8048500
24 mm, 1701M Leap III, square (1000/roll)
8050100
24 mm, 1700M Leap III, square (2000/roll)
8050192
8050195
Hold lenses firmly because they easily conform to the surface curvature of any lens.
LEAP™ Blocking System
Flexi-Blocks are easy to use with 3M LEAP™
System (or equivalent) and can be used with
Components
all Edger models. Special plastic resin holds
Coburn
lens better than metal 3M Blocks. Available in
packages of 10 or 25. These color-coded
blocks are available in different styles–rigid Low Base: Below 4 Base Curve
and flexible.
1682A A.I.T. Blocking, Box of 50, 80320-02
1682A A.I.T. Blocking, Individual, 80320-21
025-036_SF1110_EdgerTools.indd 25
Die cut from Blue lens coating tape. Used to
protect both sides of a finished lens during
hand-faceting. 2” dia. Approx. 1,000 circles
per roll.
HydroEdge™ Finishing Pad for Super
Hydrophobic Lenses
DAC Vision
DV-146 18 mm Half-Eye Round, Center Hole
DV-147 18 mm Half-Eye Round, Solid Center
Leap III
AR-1700 24 mm Square Center Hole 2,000/roll
ST-1695 24 mm Round Center Hole 2,000/roll
Opti-Speed Economy Blue
ST-137 Half-Eye 1,000/roll
HydroEdge™ - a revolutionary edging pad
specifically designed for processing hydrophobic-coated lenses. Slippage is a primary
challenge when edging hydrophobic-coated
lenses. The HydroEdge™ adhesive securely
bonds to even the slickest of surfaces. A
unique foam carrier offers superb torque
properties that virtually eliminate axis failures.
Available in a variety of shapes.
10/12/11 11:02 AM
26
Available shapes:
DV-SH70
DV-SH71
DV-SH72
DV-SH73
DV-SH76
24 mm Round with Center Hole;
24 mm Round with Solid Center;
18 mm Half-Eye with Center Hole;
18 mm Half-Eye with Solid Center;
17 mm Oval with Solid Center
NEW Stellar™ Flexible Oval Edging
Block
DAC Vision
option for a high quality overall pad. Well • Unique two-sided construction – one side
suited for both AR coated and uncoated has an adhesive specially designed for the
block and the other side specifically designed
lenses.
to bond to a hydrophobic low energy surface.
• Unique 3 layer construction virtually eliminates twisting and stretching that occurs from • Extremely aggressive adhesive designed for
high levels of torque during the edging pro- hydrophobic coatings.
cess.
– Not recommended for non-AR coated lens• High quality adhesive - Works well for both es.
hydrophobic AR coated lenses and uncoated Contact Dynamic Labs, Inc. for current pricing.
lenses.
SecurEdge™ Blocking Pads
DynaGrip
Dynamic Labs, Inc.
ST-15XES Essilor Block to WECO Edger
ST-15XES-HE 1/2-E Essilor Block to WECO Edger
ST-15XFO FOMAP Block to WECO Edger
ST-15XG2 G-C 2 Block to WECO Edger
ST-15XHZ Essilor Block to Horizon Edger
ST-15XHZ/HE 1/2-E Essilor Block to Horizon
ST-15XINDO Indo Block to WECO Edger
ST-15XOMI OMI Block to WECO Edger
ST-15XPOSI POSI Block to WECO Edger
ST-15XS Silor Block to WECO Edger
Santinelli Edger Adapters
Optical Machinery
Dynamic Labs, Inc.
One size fits all. The new lens side design
allows the block to conform its curve and
match most lens surfaces. Its exclusive plastic material allows flexibility or rigidity when
needed. It saves time by eliminating the guess
work of selecting proper block curve, thus
DynaGRIP™ Anti-Slip Pads give extra assurlowering breakage. Due to its unique size
ance in blocking slippery lenses.
combination can be used for both large and
• Best anti-slip discs available!
small frames.
There is no need for separate half-eye and
full-eye blocks.The narrow “B” dimension
does not interfere with edger operation –
eliminating time consuming hand work which
can increase breakage.
A premium pad when quality counts. Unique 3
layer construction virtually eliminates high
levels of torque during the edging process.
UltraBlue™ Blocking Pads
Dynamic Labs, Inc.
OM-7070-G2 Gerber 2 Block to San 7070/9090 Edger
OM-7070-K Kappa Block to San 7070/9090 Edger
OM-7070-KH 1/2-E Kappa to San 7070/9090 Edger
OM-7070-ST Semi-Tech Block to San 7070/9090
Edger
OM-7070-W WECO Block to San 7070/9090 Edger
OM-7070-WH 1/2-E WECO Block to San 7070/9090
Edger
3M Leap Pads
Nuvo
OptiSource
Dynamic Labs, Inc.
DV2001-1202 (B) 16.5mm (A) 29.5 mm PL to
+8 Blue
Red Edge Finishing Pads
The original Blue Pad. Sturdy and reliable. The
industry standard for many years.
DAC Vision
Unique blocking pad material designed to
reduce slipping and twisting on uncoated
lenses and standard AR coated lenses
UltraWhite™ Blocking Pads
Dynamic Labs, Inc.
• A softer material creates better surface
adhesion by creating a more uniform fit
between the lens and the block.
• A thinner material helps to reduce twisting
– Nuvo™ is thinner by design
RedEdge has a reinforced micro-cellular foam
that provides superior strength and allows • Great overall pad, great value.
exceptional holding power. This innovative
ProEdge
process enhances lens side adhesive for
improved adhesion providing superior torque
Dynamic Labs, Inc.
resistance, thereby reducing axis failures. The
block-side adhesive was designed to hold, yet
release easily from all finish blocks. RedEdge
is double tabbed for ease of removal.
Available RedEdge shapes:
These INNOVATIVE 3M Leap Pad are a double
coated adhesive pad that provides a firm and
secure bond between lens and block. 3M
Leaps Pads eliminate costly slippage and
block “fall-off”. 3M Leap III Pad are SPECIALLY
designed to meet all your edging needs. Use
these 3M Leap Pad for general edging. 3M
Leap III Pad offer SUPERIOR adhesion, especially with today’s new, high-tech coatings.
They have two to three times the torque resistance of most edge pads. Remember, the loss
of one pair of PREMIUM lenses costs more
than the price of these SUPERIOR pads.
Order today.
Very Similar to our UltraBlue blocking pads
with a slighly different adhesive that provides
an easier release when deblocking.
3M-1705 Anti-Slip Disc
OptiSource
Assorted Finish Blocks for Edging
Optical Machinery
DV-276 17 mm Oval, Solid Center
Star Blocks
DAC Vision
WECO™ Vario-blocks for all lens curvations
assure 100% pressure transfer due to the serration system. Eliminates twisting of the block
during edging. White vario-blocks for negative
lenses and red vario-blocks for standard
lenses have a hole for the centering pin to
prevent mix-up lenses. W2001-1071, 1073,
1190
BigRed™ Blocking Pads
Dynamic Labs, Inc.
ProEDGE™ is our latest release of a completely different, exclusive and groundbreaking blocking pad. Both large and small labs
alike have been eager to find a blocking pad
suited for BOTH super slippery AR lenses and
standard uncoated lenses.
• Guaranteed to be the best blocking pad to
prevent slippage on hydrophobic AR coated
lenses, yet deblock easily and cleanly from
both coated and uncoated lenses.
These INNOVATIVE 3M Anti-Slip Disc are a
double coated adhesive pad that provides a
firm and secure bond between lens and block.
3M Anti-Slip Disc eliminate costly slippage
and block “fall-off”. 3M Anti-Slip Disc are
SPECIALLY designed to meet all your edging
needs. Use these 24 mm 3M Anti-Slip Disc for
general edging. 3M Anti-Slip offer SUPERIOR
adhesion, especially with today’s new, highOMI stocks 3M LEAP Finish Blocks in the fol- tech coatings. These clear film discs are the
lowing styles: AIT; Coburn; G-C (Kappa); ST 3M solution ti reduce slippage on hydropho(Semi-Tech); WECO.
bic coated lenses.
• Made exclusively by Dynamic Labs with a Contact Optical Machinery for current pricing.
revolutionary new foam and adhesive. Unlike
Chuck Adapters
any other pad available!
SecurEdge Plus™ Blocking Pads
Optical Machinery
08-3M1705
Backside Chuck Inserts
OptiSource
Dynamic Labs, Inc.
OptiSource’s replacement chuck inserts are
manufactured to OEM specifications. We use
Chuck holders for WECO and Horizon Edgers. first-quality materials and precision tolerances to ensure the right fit and performacne your
ST-15XA-1 1” AIT Block to WECO Edger
BIG RED – A classic high performer! - Before SECUREDGE Plus – A blocking pad designed ST-15XA-3/4 3/4” AIT Block to WECO Edger
edger requires.
ProEdge™ there was BIG RED as a great exclusively for super hydrophobic AR lenses
ST-15XCO Coburn Block to WECO Edger
10/12/11 11:02 AM
Clear Oval Lens Protector 19 mm
Edger Chucks
OptiSource
OptiSource
Blue Chip Lens Protector
OptiSource
27
lens surface, and the blocking pad is attached
on top of the IFP. After edging, removing the
IFP is EASY and clean. Using Intermediary
Film Pads, has proven to be the most effective
way to protect your expensive lenses. For
optimal performance, use Intermediary Film
Pads with the Crimson King Blocking Pads.
Size: (28 x 40).
38-IFPLARGE
IFP Small 18 x 40mm
OptiSource
OptiSource Lens Protection Discs are used to
protect your lenses from scratches, block
removal and center pressure that may occur
during handling. The Lens Protector Film Disc
is pressure sensitive on one surface and
sticks on lens to protect finished surface from
lens spoilage during edging operations. These
Discs offer a lift-off tab that provides for an
EASY and CLEAN removal. Size: (19 mm).
Use 3M Blue Chip Lens Protectors to protect
lenses during edging. This transparent blue
circular tape securely adheres to the center of
the lens to protect against slippage and
scratching caused by blocks. 3M Blue Chip
Lens Protectors remove cleanly after use. 04-OLP
Never ruin a lens again during edging, block- Contact OptiSource for current pricing.
ing, or de-blocking, starting right now. Size:
Clear Round Lens Protector 39 mm
(1-3/8” circle).
08-3M1647
OptiSource now offers “Design Fit
Techbology” for Weco Style edging blocks
and Weco Style Edging blocks with LOH features. The following selection of chucks can
be purcahsed along with the blocks on the
previous pages, that match your edger.
Green Oval Backside Chuck Pad/Felt
20 mm
OptiSource
OptiSource
Blue Oval Lens Protector 19 mm
OptiSource
04-BOLP
Blue Round Lens Protector 22 mm
We now provide OptiSource Intermediary Film
Pad (IFP), our lower-cost alternative to the
Riki Pad, which feature an EASY-lift tab for
quick removal. OptiSource Intermediary Film
Pads reduce slippage while edging
Hydrophobic-Coated Lenses. The adhesive
side of the clear, thin film pad is placed on the
lens surface, and the blocking pad is attached
on top of the IFP. After edging, removing the
IFP is EASY and clean. Using Intermediary
Film Pads, has proven to be the most effective
way to protect your expensive lenses. For
optimal performance, use Intermediary Film
Pads with the Crimson King Blocking Pads.
Size: (18 x 40).
is pressure sensitive on one surface and 38-IFPSMALL
sticks on lens to protect finished surface from Contact OptiSource for current pricing.
OptiSource Blue Blocking Pad
OptiSource
lens spoilage during edging operations. These 04-FELTPAD
Discs offer a lift-off tab that provides for an Contact OptiSource for current pricing.
04-CRLP
Hydro-Tech
OptiSource
Cobalt King Blocking Pad
OptiSource
OptiSource
04-BTLP
Blue Round Lens Protector 39 mm
OptiSource
Cobalt King material is made from unique high
density foam that has been used in aerospace
and precision-industrial applications. The
natural, rubber based adhesive provides outstanding performance that has proven to be
successful on lenses that are: hard coated,
standard AR coated and (most) hydrophobic
AR coated. Try Cobalt King today!
Crimson King Blocking Pad
OptiSource
OptiSource Blocking Pad are a HIGHQUALITY, EFFICIENT alternative to the more
costly 3M products. These Blue Series
Blocking Pad offer EXCELLENT adhesion and
torque resistance. The combination of their
unique foam pad material and proprietary
adhesive reduces or completely eliminates
slippage. Blue Series Blocking Pad will not
twist, turn or tear during edging. Clean up is
EASY and you can SAVE hundred of dollars in
ruined edging jobs. Size: (18 mm). Stock up
today!
The Hydrotech is a Cost Effective Alternative
that reduces slippage while edging
Hydrophobic-Coated Lenses. The Hydrotech
is a Cost Effective Alternative pad that
adheres to all slick top coatings. This unique
adhesive found on the Hydrotech, bonds so
effectively because it was created by the makers of Hydrophobic Coating.These clear film
disc are the solution to reduce slippage on Contact OptiSource for current pricing.
hydrophobic coated lenses.Configured for
Riki 16 Blocking Pad
automated edge blocking.Use on super
hydrophobic coated lenses.
OptiSource
79-HYDROTECH
IFP Large 28 x 40mm
OptiSource
04-BRLP
The Crimson King Blocking Pad are designed
to perform on today’s “slick” top coatings.
The Crimson King’s unique adhesive works
great on all lenses and coatings, bonds
securely and yet removes cleanly with no
residue. The Blocking Pad’s tough rubber
defies tearing and will not twist or turn during
edging. Try the Crimson King today!
Riki Pad is especially well suited for the new
generation of lenses featuring super hydrophobic coatings. The exceptional hold of the
Riki Pad makes it an attractive production tool
for finishing labs because it can help create
higher yields and reduce lens waste. Riki 16
Hydrophobic blocking pad. Converted for
automatic blockers. Combine the success of
The Riki Pad with premium blocking pad
We now provide OptiSource Intermediary Film
Pad (IFP), our lower-cost alternative to the
Riki Pad, which feature an EASY-lift tab for
quick removal. OptiSource Intermediary Film
Pads reduce slippage while edging
Hydrophobic-Coated Lenses. The adhesive 38-RIKI16PAD
side of the clear, thin film pad is placed on the Contact OptiSource for current pricing.
10/12/11 11:02 AM
28
SecurEdge Plus Blocking Pad
Edging Blocks
Convex Edging Blocks
OptiSource
Phantom
Precision Tool
All blocks available in regular size and half
eye. Edging blocks are available in multiple
configurations in both metal and plastic,
including: 3M metal blocks; 3M style plastic
blocks; Essilor Blue Gamma blocks; WECO
star blocks; Santinelli blocks; 20x30mm configuration - prevents cracking/crazing on A/R
coating lenses. Other sizes, shapes and configurations also available.
These specialty blocks are perfect for edging
concave lens front. If you are working with this
style lens, you will appreciate this breakthrough in edging blocks. Choose from 2, 4, 6,
and 10 diopter. Available in 1/2 eye too.
Riki Pad
OptiSource
The brand new SecurEdge Plus LSE
(LowSurface Energy) pad uses a “dual-adhesive” system: One side of the pad has a hightech LSE adhesive that bonds to the AR
coating, while the other side of the pad firmly
grips the block. SecurEdge Plus LSE will sigContact Phantom for current pricing.
nificantly reduce or completely eliminate slipOptisafe Lens Blocking Pads
page while edging hydrophobic coated lenses.This specialized hydro/super-hydro blockPhantom
ing pad represents processing consumables
finally catching up to modern coating technology. SecurEdge Plus LSE blocking pad are the
very best solution for a single pad edge blocking process. They don’t require backside
cushion pad, the use of additional blocking
pad, or any of the new film pad designed to
use in conjunction with blocking pad.
The Riki Pad is a PREMIUM GRADE
Intermediary Film Pad (IFP) that reduces slippage while edging Hydrophobic-Coated
Lenses. The Riki Pad is a TOP-PERFORMING
pad that adheres to all slick top coatings. This
unique adhesive found on the Riki Pad, bonds
so effectively because it was created by the
makers of Hydrophobic Coating. The adhesive side of the clear, thin Riki Film Pad is
placed on the lens surface, and the Blocking
Pad is attached on top of the IFP. After edging, removing the Riki Pad is EASY and clean.
Using the Riki Pad / Intermediary Film Pad has
proven to be the most effective way to protect
your expensive lenses. For optimal perfor- Contact OptiSource for current pricing.
mance, use the Riki Pad with the Crimson
Chuck Tape
King Blocking Pads. Size: (38 x 25).
38-RIKIFLIM
OWC
Riki Roll
OptiSource
No slipping, with excellent adhesion properties to all lens materials and coatings, such as
uncoated and coated CR39, Polycarbonate,
Hi-Index, and Glass. The adhesive system
implemented in the Optisafe Lens Blocking
Pads provides the appropriate amount of
adhesion to prevent slipping while edging
lenses, yet the pads are easy to remove leaving absolutely no residues.
Deblocking Pliers
Precision Tool
Light Weight and hand Friendly. Use these
pliers to rotate the block from the lens; easy
on wrist and lenses. Available in round and
oval styles, new stainless inserts magnify
gripping power.
Edger Chucks
Precision Tool
Design to exactly match our edging blocks.
The Optisafe Lens Blocking Pads are the ulti- Theses stainless chucks ensure the highest
mate solution to all your edging problems. degree of axis alignment. Available in various
Available in different sizes to fit metal and styles: Santinelli, WeCo, Triumph and Kappa
Edgers. Order half-eye or whole- eye.
For FlexiBlock and LEAP™ blocking systems. plastic blocks.
Strong adhesive and backing prevents twist- Contact Phantom for current pricing.
ing. 2,000 pads per roll.
Optisafe® Anti-Slip Pad
Edger Chucks
The Riki Roll is a PREMIUM GRADE
Intermediary Film Pad Roll that reduces slippage while edging Hydrophobic-Coated
Lenses. The Riki Roll is a TOP-PERFORMING
pad that adheres to all slick top coatings. This
unique adhesive found on the Riki Roll, bonds
so effectively because it was created by the
makers of Hydrophobic Coating. The adhesive side of the clear, thin Riki Film Roll is
placed on the lens surface, and the Blocking
Pad is attached on top of the IFP. After edging, removing the Riki Pad is EASY and clean.
Using the Riki Roll / Intermediary Film Pad has
proven to be the most effective way to protect
your expensive lenses. For optimal performance, use the Riki Roll with the Crimson
King Blocking Pads. Size: (39 x 25).
38-RIKIROLL
SecurEdge Blocking Pad
OptiSource
S91255 PSC Chuck Tape
S91255-01 1/2 eye chuck tape
Phantom
Precision Tool
Finish Blocks
OWC
Designed to exactly match our edging blocks,
these stainless chucks ensure the highest
degree of axis alignment. Available in most
edger styles for WECO style blocks. Order in
Anti-Slip Pad provides excellent adhesion to whole eye or _ eye
oleophobic and super hydrophobic premioum Contact Precision Tool for current pricing.
lens coatings. Apply pad to a clean les surEdging chucks
face prior to applying blocking pad to prevent
Precision Tool
les from “twisting” and “slipping” off-axis
while edging.
The Precision chuck is available in most edger
styles. They are made of Stainless steel and
Available in high, low and regular base and 1/2
Item # T1100 Specs: 500 pads/roll 25x40 mm, machined to give you the longest life. Coupled
eye. All popular blocking styles.
with our edging blocks, they will give you
Item T1125
near-perfect axial accuracy.
3M LEAP III™ Blocking Pads
Phantom
Phantom Hydro Pads
Phantom
Loh 40 Block
Precision Tool
SecurEdge Blocking Pad from OptiSource
International are the industry’s newest innovation in blocking pads. With a unique foam
substrate and proprietary adhesive, they provide dependable torque resistance on every
job. SecurEdge Blocking Pad offer an option
when it comes to today’s edging challenges.
Many customers find a quality advantage with
SecurEdge Blocking Pad and GREAT
SAVINGS as well! This Square with DoubleTab SecurEdge Blocking Pad is 24 mm.
Pads hold tight and resist torque while edging
both glass and plastic lenses, having twice
the holding power of competitve brands. The
double tabs allow for easier handling and
fewer scratches. Available in rolls of 1,000 and
2,000, round or square. Choose from 1695’s
(round), 1700’s/1701’s (square), 1692’s (round
for WECO edgers), 1693’s (1/2 eye round), and
1647 Blue Chip lens protectors.
Newest generation of edging pads for the
super hydrophobic/Oleophobic lenses. The
new phantom Hydro Pads (HT Version) are
designed with dual adhesive system, to provide the appropriate amount for the slick surface of the lens and also for the block. This
prevents slippage while edging lenses, yet the
pads are easy to remove leaving absolutely no
residue. The Phantom hydro Pads are the
ultimate solution to all your edging problems.
Available in many shapes and sizes.
This block fits in any standard Loh blocker
and provides extra support when alloy blocking thin or other specialty lenses. The blocks
come in a sphere design and also with cutouts to fit multi-focal lenses. Block cutouts
are available in 15 degree increments around
the face of the part for off-axis blocking. 2.25”
Diameter x 1”H. 3 oz.
10/12/11 11:02 AM
Precision Machined Aluminum LOH
Style Lens Blocks
Precision Tool
Blocks
PSI
29
fere with edger probes. Comes in rolls of 500
or 2,000 in clear, blue, red or green.
Open-Center Edging Block
SecurEdge Plus Blocking Pads
Precision Tool
PSI
Precision Tool’s Open-Center Edging Blocks
have the tradition open-center design. To
prevent costly crazing and slippage, these
blocks come in three diopter curves, colorcoded for easy ID. Choose from whole eye or
17 or 19mm 1/2 eyes.
Precion Oval Blocks
Precision Tool
Designed for today’s narrow “B” dimension
lenses. These blocks provide the support and
surface area needed on fussy front coated
lenses. Available in 4 d. increments to match
the front curves. Available in different styles.
Machined from solid aluminum bar stock to
exacting tolerances. Anodized in any of eight
colors to ensure long life and enable you to
color code. Available with CNC machined,
hardened-steel Coburn inserts. Our specially
engineered inserts will not loosen with use.
Standard LOH Block, LOH Block w/Coburn
inserts, Standard LOH Block, LOH Block w/
Coburn inserts, and LOH blocks with orientation slot (shown in green).
Edger blocks available for AIT, Shuron,
SemiTech and Coburn machines. Low base
blocks are less than 4 base front curve. High
base blocks have an 11-14 base front curve. SecurEdge Plus® is the latest generation of
1/2 Eye Blocks also available.
blocking pads designed specifically to bond
to new AR super hydrophobic lens coatings.
Blue Blocking Pads
Based on the proven design of the highly sucPSI
cessful SecurEdge® technology, SecurEdge
Plus® incorporates a dual, high performance
adhesive system. On one side of the pad is an
Solid Center Edging Blocks
adhesive engineered to adhere to slick lens
coatings without slipping, while the other side
Precision Tool
has a different adhesive designed to adhere
securely to the block. The pad offers a soft
foam surface that conforms to any curve while
protecting the lens. The pads have a doubletabbed design for easy removal. PSI offers
SecurEdge Plus® in nine configurations to fit
PSI’s Blue Blocking Pads are an economical,
time proven product for all lens materials. most edger blocks. SecurEdge Plus Blocking
They feature an aggressive, non-slip positive Pads are available in rolls of
holding adhesive that keeps the pad in place.
They are double-tabbed for easy removal. 100 in the following
Precision Tool Technologies Edging Blocks Blue Blocking Pads are available in rolls of
configurations:
are specifically designed to protect costly 1000 in the following configurations:
crazing on front-coated lenses. The unique 2810 24mm round
4805 24mm round
solid-center design, cradles your lens. By 2810SD 24mm round, solid center
4805SD 24mm round, solid center
closely fitting the curve of the lens, adhesion 2818 18mm half-eye round
is maximized. When ordering, choose from 3, 2850 18mm half-eye rectangular
2850SD 18mm half-eye rectangular, solid center
4807 18mm half-eye rectangular
color-coded diopter ranges and 17mm and Contact PSI for current pricing.
19mm 1/2 eyes.
4807SD 18mm half-eye rectangular, solid cenContact Precision Tool for current pricing.
Precision Accu-Block Style Lens
3M Blue Chip Lens Protectors
Blocks
PSI
Flexible Blocks
PSI
ter
4808 20mm half-eye rounded rectangular
4811 26mm oversized round
Precision Tool
4812SD 32mm oval, solid center
4813 32mm oval for Nidek blocks
4818 18mm half-eye round
Precision-machined from aircraft aluminum
bar stock to exacting tolerances for on-center
blocking. Anodized to the same color coding
system as the O.E.M. Guaranteed to work
flawlessly in your Gerber blocking system.
Available in: Red, Plano; Blue, 3 diopter; Grey,
6 diopter; Gold, 7.5 diopter; Green, 11 diopter.
Also available for glass blocking.
Precision Gerber Lens Blocks
SecurEdge™ Blocking Pads
3M Blue Chip Lens Protectors are used in
conjuction with blocking pads to prevent the
lens from slipping. Reduces lens surface
scratching during finishing and deblocking.
Each chip is tabbed for easy removal. 33mm,
pre-cut. 2,000 per roll.
1647
3M Leap III Blocking Pads
PSI
Precision Tool
Flexible edger blocks, available for Weco,
Kappa, Gamma and other edgers utilizing a
flexible block, conform to all types of front
curves to maximize adhesion and prevent
twisting of the block during edging. Available
in packages of 25.
3002-2072 Weco half-eye block
4001-2072 Weco standard block
80042 Gamma/Kappa standard block
80043 Gamma/Kappa half-eye block
LenSaver Dots
PSI
Precision-machined from aircraft aluminum
bar stock to exacting tolerances for on-center
blocking. Anodized to the same color coding
and letter I.D. system as the original equipment manufacturer. All centers are made from
hardened steel, engineered to stay firmly in
place, and are replaceable. Guaranteed to
work flawlessly in your Gerber blocking system. Available in: (A) Red, Plano; (B) Blue, 3
diopter; (C) Grey, 6 diopter; (D) Gold, 7.5 diopter; (F) Green, 11 diopter. Lens blocks for
glass also available.
Leap III Blocking Pads are the latest generation of blocking pads developed by industry
leader 3M. Pads hold tight and and resist
torque while edging both glass and plastic
lenses. They are double-tabbed for easy PSI LenSaver Dots are an economical way to
removal. PSI stocks 3M Leap III Blocking prevent damage from the edger chuck as well
as slippage and scratches during finishing
Pads in the following configurations:
and deblocking. LenSaver Dots are transpar1692M 26mm oversized round (1000 per roll)
1695M 24mm round (2000 per roll)
ent so layout markings are visible underneath.
1696M 18mm half-eye rounded rectangular (1000 per
Double tabbed for quick and easy removal.
roll)
LenSaver Dots have been tested and proven
1696M 18mm half-eye rounded rectangular (1000 per
to stick to even the slickest lens coatings.
roll)
Available in standard 35mm round style and
1700M 24mm square (2000 per roll)
1701M 24mm square (1000 per roll)
25mm x 35mm oval shape which won’t inter-
PSI
SecurEdge™ Blocking Pads feature the newest technology available in blocking pad
material and adhesives. The layered, reinforced material in combination with an acrylic
adhesive adds up to the best pad for use on
today’s slick lens coatings, while the soft foam
surface allows the pad to conform to any
curve and stick tight to all lens materials. They
are double-tabbed for easy removal.
SecurEdge™ Blocking Pads are available in
rolls of 1000 in the following configurations:
2805 24mm round
2805SD 24mm round, solid center
2807 18mm half-eye rectangular
2807SD 18mm half-eye rectangular, solid center
2808 20mm half-eye rounded rectangular
2811 26mm oversized round
2812SD 32mm oval, solid center
2813 32mm Oval for Nidek blocks
2818 18mm half-eye round
10/12/11 11:02 AM
30
3M LEAP III™ Finish Blocking Pads
Santinelli
These pads offer slip resistance customers
have come to expect from 3M™, keeping
lenses firmly in place during edging. Fewer
errors and less waste means improved productivity, faster turnaround times and better
lab efficiency. 3M Leap III™ pads are available
in variety of shapes and sizes, and offers
superior adhesion to all lens material.
Blocking Pads
Sentilles
199-028303 High Base, OMI 3 KEY
HARD RESIN – SHURHOLD
199-017801 Regular Base, AIT
199-017802 Regular Base, OMI 2 KEY
199-017804 Regular Base, SEMI-TECH
199-017805 Regular Base, SHURON
199-017806 Regular Base, SILOR/POSI
199-017808 Regular Base, SANTINELLI
199-017809 Regular Base, COBURN
199-017810 Regular Base, GAMMA
199-018201 Low Base, AIT
199-018204 Low Base, SEMI-TECH
199-018301 Hight Base, AIT
199-018304 Hight Base, SEMI-TECH
199-018401 Half Eye, AIT
199-018402 Half Eye, OMI 2 KE
199-018404 Half Eye, SEMI-TECH
199-018405 Half Eye, SHURON
199-018407 Half Eye, WECO/VARIO
199-018408 Half Eye, SANTINELLI
199-018409 Half Eye, COBURN
199-018410 Half Eye, GAMMA
METAL BLOCK – SHURLEAP
199-168201 Low Base, AIT
199-168204 Low Base, SEMI-TECH
199-168301 High Base, AIT
199-168304 High Base, SEMI-TECH
199-168401 Half Eye, AIT
199-168404 Half Eye, SEMI-TECH
Blocks Half Eye
196-35 WECO/Shuron 486–A, SHURON
SLIP-ON SHAFT
197-21 Dimelp/Edgemaster 2000 & II, AIT
197-24 Dimelp/Edgemaster 2000 & II, SEMI-TECH
197-25 Dimelp/Edgemaster 2000 & II, SHURON
197-31 Essilor MBA, MBX, MBS, AIT
197-32 Essilor MBA, MBX, MBS, OMI 2 KEY
197-33 Essilor MBA, MBX, MBS, OMI 3 KEY
197-34 Essilor MBA, MBX, MBS, SEMI-TECH
197-36 Essilor MBA, MBX, MBS, SILOR
197-51 Gerber/Indomatic Elite/Professiona, AIT
197-52 Gerber/Indomatic Elite/Professiona, OMI 2 KEY
197-53 Gerber/Indomatic Elite/Professiona, OMI 3 KEY
197-54 Gerber/Indomatic Elite/Professiona, SEMITECH
197-56 Gerber/Indomatic Elite/Professiona, SILOR
197-59 Gerber/Indomatic Elite/Professiona, COBURN
197-91 WECO/Coburn –86-B, 440, 461, 480, 244, AIT
197-92 WECO/Coburn –86-B, 440, 461, 480, 244, OMI
2 KEY
197-93 WECO/Coburn –86-B, 440, 461, 480, 244, OMI
3 KEY
197-94 WECO/Coburn –86-B, 440, 461, 480, 244,
SEMI-TECH
197-95 WECO/Coburn –86-B, 440, 461, 480, 244,
SHURON
197-96 WECO/Coburn –86-B, 440, 461, 480, 244,
SILOR
197-99 WECO/Coburn –86-B, 440, 461, 480, 244,
COBURN
Half-Eye Adhesive Blocking Pads
Pad Holder for Elite or Professional
Edger
Sentilles
Replacement Brass Pad Holder, large and
small for clamping spindle side on ELITE or
PROFFESIONAL edger. Use large for regular
lens edging, small for half eye and small lens
edging. Also available are the large and small
fiber pads for these holders.
1200-9501 Pad Holder Brass E&P Large Rt
1200-9502 Pad Holder Brass E&P Small Rt
1200-9503 Fiber Pad E&P Large 23mm
1200-9504 Fiber Pad E&P Small 19mm
Pad Holder Swivel Weco Edgers
Sentilles
Sentilles
Sentilles
Suregrip pads are pressure sensitive, white on
black with superior grip and all have tabs for
easy removal. Use with all finishing block
systems: Leap, OMI Flexiblock, Novamatic,
AIT, Weco, Dimelp, Silor, etc. Any system that
uses adhesive pads needs Suregrip blocking Blocks for edging half eyes or small lenses are
pads. Also available - 1/2 eye pads. See list- available for most block styles, accepted by
various edger chucks in the industry. If half
ings below:
eye block you require is not listed call for
Blocking Pads Regular
assistance. Half Eye Block styles are available
199-1001 Regular Round 24 + 5mm tab white on
black, 1,000/Roll
for: Ait, OMI 2 key, Semi-tech, Shuron, Silor
for WECO VARIO blocks
posiblock, Weco vario, Santinelli & Coburn. all
199-1692 Jumbo Round 26 + 5mm tab white on black,
styles are available in: hard or flexible resin.
1,000/Roll
Metal blocks are available for: AIT, Semi-Tech,
New Oval Pad for Regular & 1/2 Eye Block
Shuron & Coburn. Half Eye Blocking Pads are
199-1801 Oval 20 x 30mm white on black, 1,000/Roll
No Hole Pads for use with OMI/OWC Blocking
also available to accomodate the half eye
199-1011 Regular Round 24 + 5mm tab white on
blocks for a more accurate and better bevel
black, 1,000/Roll
placement without being influencedin edging
Sure Leap 2
operation. Half-Eye Blocking Pads are rect199-1698 Round + 2 flats 24 + 4mm tab white on
angle w tab. 199-0742/1000 roll, 199black, 1,000/Roll
0741/2000 roll
Sure Leap 2 +
199-1701 Square Shape 24 + 3mm tab white on black,
1,000/Roll
Note: New Oval Blocks Are Also Available for some edging systems to use with the New Oval Pads above.
Suregrip HALF EYE pressure sensitive pads
are available in Round, with hold, and
Rectangular, without hole. Use small pads to
edge 1/2 Eyes or small eye sizes. The 1798 is
the same size and shape as 3M #1693 and is
used with the blocks for the ESSILOR/
GERBER GAMMA edger.
199-1773 1/2 Eye Rectangle 17 x 23 + 4mm Tab NO
HOLE
199-1795 1/2 Eye Round + 2 Flats 18 + 4mm Tab with
HOLE
Leather Fiber Pads for Edgers
Sentilles
Chucks for Edgers
Sentilles
Brass pad holders and fiber pads for edger
lens chucking.
Used on Elite and Professional Edger pad
holders right clamping spindle. Leather surface provides more secure grip to prevent
slipping. Order #1200-9503 Large Leather
Fiber Pad 23mm, #1200-9504 Small Leather
Fiber Pad 19mm or call for assistance.
Chucks available for many edgers using LEAP,
Posiblock, Flexiblock, Vario, Star, and
Santinelli blocking systems. Specify edger
model and block style used.
MOUNT-ON PINS CHUCK
197-11 AIT – Mark IV, V, VI, AIT
197-12 AIT – Mark IV, V, VI, OMI 2 KEY
197-13 AIT – Mark IV, V, VI, OMI 3 KEY
197-16 AIT – Mark IV, V, VI, SILOR
PUSH-IN SHAFT
196-11 Omi/Helbrecht Ingoh 138, AIT
196-12 Omi/Helbrecht Ingoh 139, OMI 2 KEY
196-13 Omi/Helbrecht Ingoh 140, OMI 3 KEY
196-14 Omi/Helbrecht Ingoh 141, SEMI-TECH
196-15 Omi/Helbrecht Ingoh 142, SHURON
196-19 Omi/Helbrecht Ingoh 143, COBURN
196-21 WECO/Shuron –88-463 A B C D, AIT
196-22 WECO/Shuron –88-463 A B C D, OMI 2 KEY
196-23 WECO/Shuron –88-463 A B C D, OMI 3 KEY
196-24 WECO/Shuron –88-463 A B C D, SEMI-TECH
196-25 WECO/Shuron –88-463 A B C D, SHURON
196-26 WECO/Shuron –88-463 A B C D, SILOR
196-29 WECO/Shuron –88-463 A B C D, COBURN
196-31 WECO/Shuron 486–A, AIT
196-32 WECO/Shuron 486–A, OMI 2 KEY
196-33 WECO/Shuron 486–A, OMI 3 KEY
196-34 WECO/Shuron 486–A, SEMI-TECH
Pad Holders and Fiber Pads
Sentilles
FLEXIBLE BLOCK – SHURFLEX
199-027805 Regular Base, SHURON
199-027806 Regular Base, SILOR/POSI
199-027807 Regular Base, VARIO/WECO
199-027809 Regular Base, COBURN
199-028202 Low Base, OMI 2 KEY
199-028203 Low Base, OMI 3 KEY
199-028302 High Base, OMI 2 KEY
1200-1191 Swivel pad holder sm. rt
1200-1193 Swivel pad holder lg. rt.
Sentilles
Blocks for Lens Edging
SureBlocks to mount lenses for edging. Large
variety available. Specify edger chuck style
when ordering. Several new designs of materials to reduce slippage by giving better adhesion of block to pad. All blocks are packaged
in multiples of 10 blocks per style. Materials
available: Shurhold Hard Resin Block,
Shurhold Flexible Blocks-Conform to Lens
Curve, Shurhold Metal Blocks-Leap Style.
The universal joint swivel pad holder conforms to lens curve, regardless of prescription
in lens. Eliminates twisting and helps to follow
front curve, thus producing a professionally
finished RX. Large size for regular lens edging
and small for small lens and half eye edging.
Takes fiber, leather or felt pads 24mm or
18mm.
Lens Protector - Round Film Disc
Sentilles
Fiber Pad
463-30018 large, pack of 12
463-30019 small, pack of 12
Fiber Pad Elite
1200-9503 Large 23
1200-9504 Small 19
Pad holder
1200-30036 large, right
1200-30037 small, right
1200-30038 small, left
1200-30039 large, left
Pads Fiber For Edger
Sentilles
Suregrip round lens protector film is pressure
sensitive on one surface and sticks on Lens to
protect finished surface from lens spoilage
during edging operations. Guards against
scratches and abrasions that may occur during handling. Lift-off tab provided for easy
removal. Available in Clear, Blue, or Green.
Specify color when ordering.
199-1148B Round 39 mm with tab, Blue
199-1148C Round 39mm with tab, Clear
199-1148G Round 39mm with tab, Green
Resilient fiber pads for edgers. Fit Elite,
Professional, Weco, MBX and many others.
Small pad 18mm O.D., Large pad 24mm O.D.
Sold in packs of 10. 30019 Small Fiber Pad,
30018 Large Fiber Pad. 1200-9503 Fiber Pad
Elite Large 23, 1200-9504 Fiber Pad Elite
Small 19.
10/12/11 11:02 AM
3M Anti- Slip Disc 1705
Signet Armorlite
18mm oblong pads are also available. The Contact Coburn for current pricing.
1696M is expressly for edging small frames
OPTISAFE Marking Ink Removers
and half-eyes.1712NR is designed to be used
with Nidek blocks. 1692M, 1693M, 1696M
Phantom
and 1712NR are packaged in 1,000 pad rolls.
31
Alcohol 99% Ultra
Sentilles
Contact Signet Armorlite for current pricing.
3M™ LEAP™ LSE Pads
Signet Armorlite
Designed for use when edging slippery hydrophobic – coated lenses, the 3M Anti-Slip
Discs #1705 works in conjunction with standard 3M Leap III Pads. Placing the 24x44mm
Anti-Slip disc between the AR lens and the 3M
LEAP III Pad helps improve adhesion and
maintain axis stability during edging process.
Quantity: 500/box.
3M Anti-Slip Disc #1705
Signet Armorlite
3M LEAP LSE Finish Blocking Pads
For Hydrophobic-Coated Lenses
3M LEAP LSE edging pads are made of a
specially formulated adhesive that is designed
to adhere to hydrophobic or anti-reflective
coated lenses for improved edging while
maintaining axis stability.
Availability (1,000 pads/roll):
Filtered Isopropyl Alcohol 99% reagent grade
provides highest quality and purity. Can be
used anywhere in the lab where you currently
use a lower quality, more expensive Isopropyl
Alcohol. Exceeds specifications for quality
production and technical requirements as well
as the specifications established by the
American Chemical Society (ACS) in the seventh addition of “Reagent Chemicals”. 4 galCan also be used as a safe solvent on many
lons/case.
subtrates such as polycarbonate, acrylic, 1-2073-128
metal, ceramic, and glass, to remove stains, Contact Sentilles for current pricing.
marker ink, and paint without damaging the Quantity discounts available.
surface.
Mighty midget III 23.585
Acetone free, polycarbonate safe, ink removing formula for removing markings on all types
of lenses. Marking are instantly removed with
no residues. Optisafe Marking ink remover
performs as well as Acetone but will not
attack lens material and surfacing coatings.
#1707, an 18mm oval shaped half-eye pad
Environmentally friendly formula. Refers to
(same size/shape as 1696M LEAP III).
MSDS.
#1708, a 24mm round pad (same size/shape
as 1695M LEAP III).
Available in pen form, 4 oz, 8 oz, 500ml, and
quart sizes.
Ceramic Edger Wheels
Hand Stone Wheels
The 3M™ Anti-Slip Disc #1705 is specially
designed and formulated for edging hydrophobic-coated lenses. The clear disc is
placed between the slippery surface of the AR
lens and a standard 3M LEAP™ III Pad to
imporve adhesion and axis stability. No special non-slip edging pad is necessary.
Selection of ceramic wheels for the R-5 Hand
Edger 930500-10” Tan 280 grit, 9304-16” Tan
280 grit.
Packaged in quantities of 500, the Anti-slip
Disc measures 24mm x 44mm.
OptiSource
Vigor Optical
Lens Cleaner
PSI
Coburn
Edging Wheel
New & improved one pint stainless steel ultrasonic cleaner. Full cleaning power of the larger
lab size, but small for dispensary counter.
Tank storage cover. Rack to protect bottom of
tank and prolong life. Timer with auto shutoff.
1 frame size. 50W of power, 110V and 50Hz. 7”
x 4.2” 5”. . . . . . . . . . . . . . . . . . . . . . . . . $200.00
PSI’s Simply Clean lens cleaner cleans glass
Coatings
and plastic lenses quickly and imparts a brilliant luster. Cleans frames as well. Excellent
Poly Edge Glaze
for final cleaning. Cleans glass, plastic, A/R
OptiSource
coated or polycarbonate spectacle lenses.
Simply Clean II, anti-static cleaner is also
available. Cleaners are available in 1/2 oz.
Our wheels perform well in every brand and dropper top and 1, 2, 4 and 8 oz. pump tops
style of edger, with any lens material, and for as well as quart and gallon refills. Private
every purpose. We carry hundreds of roughlabeling is available.
ing, finishing ,beveling and hand-edging
The 35mm pre-cut round discs help guard wheels.
against lens spoilage during edging opera- Contact OptiSource for current pricing.
tions. Recommended for use when handling
Acetone
easily scratched lens materials. Use with 3M Cleaners
Sentilles
LEAP™ III Pads. Each disc is tabbed for easy
Poly edges are cloudy after edging, but not
application and removal. 1647–2,000 discs/
BPI® No Foam Powder™
anymore with OptiSource’s Poly Edge Glaze.
roll, 23oz.
It is super-effective for producing a clear, finBPI
ished look on edged Poly Lenses. Just wipe
3M LEAP™ III Blocking Pads
on Poly Edge Glaze and let it dry. Simply put
Signet Armorlite
this custom chemical onto a cotton swab,
wipe around the Poly Lens edge and watch
the edges of that lens shine. It is also great for
drill mounts holes, keeping them from cracking.
Signet Armorlite
The blocking pad keep lenses firmly in place
during edging, helping to reduce errors and
waste. 1700M 2,000 24mm square pads/roll;
1701M 1,000 square pads/roll; 1695M 2,000
24mm round pads/roll. Other round 3M LEAP
III Pads are available for special edging needs.
1692M is a 26mm pad designed for use with
WECO flexible blocks; the 18mm 1693M is to
be used with the Essilor GAMMA edger. Two
Acetone for general purpose cleaning, AR
processes and removal of factory markings.
A broad spectrum de-foamer that controls Filtered to 0.2 microns and exceeds specificafoam build-up during glass and plastic surfac- tions for laboratory and AR coating processing operations and wipes out foam in edgers. es. Also exceeds specifications established
One cap full treats five gallons of solution.
by the American Chemical Society (ACS) in
# 40211
the seventh addition of “Reagent Chemicals.”
Can be used anywhere in your lab procedures
Acetone
where you are currently using a lower quality,
Coburn
more expensive acetone.
For cleaning lenses, metal frames, and gen- 1-2043-128 Gallon
eral laboratory use. 19999-70 Regular grade. Contact Sentilles for current pricing.
99-PEG
Spin-On
OptiSource
Is your lab overpaying for UV curable backside coating? Spin-On delivers guaranteed
superior performacne at a significant savings.
It’s solvent free formula is both safe and effective. - Instantly compatible in all standard spin
coater machines.
99-SPINON
10/12/11 11:02 AM
32
993-2T & 993-1T Filtration Systems
Coolant Filters
PSI
Dry Coolant
Coolants (Edger Tools)
Edger Coolants
airMAX Universal Lens Edger Air
Purification System
Coburn
A.I.T. Industries
Lens Grinding Coolant: Versatile water-based
coolant that can be used in generating and
edging. Excellent for photochromics. Highly
concentrated.
The 993-2T Filtration System addresses the
needs of laboratories that run edgers or cylinder machines in a pod or line configuration.
This filtration system utilizes two stainless
steel tanks. The first tank settles the larger
particles out of suspension. The second tank
is a reservoir, with a combined capacity of 45
gallons that recirculates to the filter canister
and then to the cylinder machines or edgers.
Required floor space: 18.5”H x 18”W x 70”L.
#993-2T. The system can be converted to a
one-tank unit to accommodate labs with limited floor space. Required floor space for the
993-1T is 18.5”H x 18”W x 26”D. #993-1T. The
993-2T is available with a 7-cluster filter cartridge (model #993-2T) a 19” 7-cluster filter
cartridfe (model #992-2T19) or a single
Hurricane filter catridge (model #9932THUR90)
Blue-Diamond versatile water-based coolant,
quickly settles plastic particles in automatic
systems.
Coolant Filter Bags
Phantom
The airMAX is a durable, compact air purification system designed to eliminate the foul
smells and dust associated with edging highindex and polycarbonate lenses. It’s rugged
design allows for years of hassle-free operation and its industrial strength motor makes it
powerful enough to hook up in line with up to
2 edging systems. It’s universal design allows
it to be connected to virtually any wet edging
system.
Coolant Filter Bag
PSI
80191-70 Per gallon (3.8l)
PSI’s Dry Coolant is ideal for labs wanting to
Lens Grinding Coolant: Versatile water-based cut down on shipping costs and/or storage
coolant that can be used in generating and space in their labs. This highly stable freezeedging. Excellent for photochromics. Highly
dried powder contains descaling additives to
concentrated.
remove build up and swarf residue on edgers
80193-70 1 gallon
and generators. With an indefinite shelf life,
this is easy to use, consistent, mess free and
ST-524 Edging Coolant
always fresh. One pound of dry coolant can
DAC Vision
make up to 100 gallons.
Item #1575 1 lb. Bottle
Water-soluble wax base for edging machines. Contact PSI for current pricing.
Water-soluble coolant per gal. (3.8l ).
ST-524-1 1 Gallon
ST-524-5 Pail
PractiCool
PSI
Blue Coolant, OptiSafe
PSI
A.I.T. Industries
This nylon coolant filter bag ties to the end of
any edger drain hose. It is inexpensive, easily
washable, reusable and effective.
A20915
Belrose Edger Circulating Pump
Belrose
Disposable filter bags effectively remove
glass and plastic grindings from generator
and edger coolants. Drawstring top for easy
disposal. Bags are 24” x 22” and are available
in bundles of 25
1104 Cotton filter bags
1108 Nylon filter bags
1112 Polyester filter bags
Edger Filter
An environmentally safe, water soluble, nonfoaming, lens grinding concentrate, specially
formulated to provide high lubricity, cooling
and rust prevention when grinding glass, plastic, or photochromic lenses. Prolongs the life
of the diamond wheels and tools.
C496 Quart
C497 Gallon
Coolant
Phantom
Coolant designed specifically for the optical
industry. PractiCool is a biodegradable, fully
synthetic water soluble coolant for plastic and
glass lens generating and edging. It does not
contain oil. Provides superior lubrication and
corrosion protection. Contains a special polymeric additive, which provides for rapid swarf
settling for cleaner running coolant. Non
foaming.
1600P Pail - 5 gallon
Item #1600G gallon
Coolant Pump For Edgers
Sentilles
PSI
A submersible, epoxy-encapsulated pump
with outer case constructed of durable polyester, and case filled with a special heattransfer epoxy. Completely sealed motor is
permanently lubricated. Pumps 170 gallons
per hour. 115V AC, 60Hz. Credit cards accepted. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $79.00 Replaceable bag-type filtration system for the
removal of solids to 50 microns from generaGrab Bag System™ ST-31
tor, edger and cribber coolants. Filters glass
DAC Vision
and plastic for up to three edgers. Output of
up to 6gpm. 110V, 60Hz.
952
An environmentally safe, water soluble, nonfoaming, lens grinding concentrate, specially
formulated to provide high lubricity, cooling ,
and rust prevention when grinding glass, plastic, or photochromic lenses. Prolongs the life
of the diamond wheels and tools.
C470 Quart
C472 Gallon
Filter, Edger Direct Water
Bio-Cool
Santinelli
PSI
Completely submersible coolant pump with
hanger that hooks over edge of coolant bucket. 110V pump has significant force to pump
water from floor level to wheel cutting height
to keep lens cool and wheels’ matrix clean.
Will work with any diamond edger. Mastercard
and Visa Accepted.
1200-30044 Submersible Pump LG Blue 120V
201-KIT Re-circulating coolant supply kit 120V -for
hand edger
Defoamer
Sentilles
Simple to use, can be clamped to drain pipe
or as open bag collector. Clamps, holders,
adapters and multiple bag hardware available
at nominal cost from DAC. Vision, Matami or
use your own. Either way, your machine can
be adapted to Grab Bag System™ in an hour.
Grab Bag System™ grabs the glass and plastic particles you want to get rid of and does it
better and cheaper than present method.
Minimum order one pack (50 bags). ST-31 For
large edgers and single-bag generator setup.
Specs: 19” x 19”.
A basket strainer for direct water hookups
featuring a body drain port and rated at 150
psi. Strainers are available in PVC with Viton
seals and come in various sizes. Manufactured
from approved material it provides maximum
straining capacity with minimum pressure
drop. When waste systems are required for
debris resulting from edging plastic or polycarbonate, line can be shut down for basket
cleaning.
A biodegradable, water-soluble coolant that
offers high lubricity, resists bacterial growth
and meets all E.P.A. standards. Contains no
hydrocarbons or nitrates. Odorless and nonfoaming. Clean-running Bio-Cool for plastic
and glass generating and edging is a competitively priced concentrate: mix 20 to 1 for Reduce foaming problems in edger coolant,
plastic generating, 10 to 1 for glass generating slurries, anywhere foam is a problem in your
lab, with this anti-foaming agent. 1-11202-128
and 50 to 1 for all edging applications
Gallon. 1-11202-032 Quart. 1-11202-008 8oz
1500P 5 gallon pail
10/12/11 11:02 AM
Coolants (Edger Tools)
Edger Coolant Concentrate
Sentilles
9-3200 Rimless Cutter Flute
9-3230 Shelving Cutter Flute
9-3242 Hab 5 (Special Bevel)
9-3242 Hab 5° sets
9-3290 Bevel & Half Roll Flute
9-3290 Bevel & Half Roll Sets
9-3700 Horizon III-Sport Goggle Hab
All flutes except 9-3290 & 9-3242 Flute set re-grind &
precision polished
Diamond Edger Wheels
$480.00
120-4190
19MM SB GLASS/PLASTICS, SPECIAL BEVEL w/UC
$490.00
125-7360
36SMM MS V5 IN FIN/POL SET, PVF-120 HAB FIN/
POL
AIT GRAND MARK 600.661 (D146/154-B38)
DIMELP
EDGEMASTER II AND 2000
(D152-B25.4)
104-1210
21MM ALL MATERIALS, ROUGH
104-1212
21MM POLY/PLASTICS, ROUGH
104-1213
21MM WHOLES/TRIVEX, ROUGH
104-3210
21MM GLASS/PLASTIC, FV4-120 ANGLE
AIT MARK IV, MARK V (D R146-F153-B25.4)
Diamond Wheels
A.I.T. Industries
Edger coolant concentrate for all diamond
edgers, glass or plastic. Premeasured 4oz.
bottle mixes with water to make exactly five
gallons. Defoamer already added. This product is biodegradable and contains no phosphates. 01-22011 4oz. bottle, 01-22012 Quart,
We carry a complete line of high quality dia01-22013 Gallon.
mond bonded edger wheels for major edger
manufacturers. Call us with the make and
model of your edger along with the width of
Diamond Blades
your wheels in millimeters for a quotation.
Poly Crystalline Diamond (PCD) Tool
Edger Wheels
OptiSource
PSI
101-0150
21MM GLASS, ROUGH
101-0210
21MM GLASS, ROUGH
101-1150
21MM GLASS, ROUGH
101-1151
101-3150
15MM GLASS, MK IV FLAT FINISH 15
101-5150
102-3210
21MM GLASS/PLASTIC, MK V FV4-120 ANGLE
GLASS/PLASTICS , ROUGH
PLASTCS/GLASS, ROUGH
PLASTICS/POLY , ROUGH
PLASTCS/GLASS, SPECIAL BEVEL
GLASS/PLASTIC , SPECIAL BEVEL/HAB
AIT MK, V, DX, XL & DIMENSION ONE (D
R146/F 153-B25.4)
Our PCD tools are 100% made in the USA and
will outlast lesser quality imported cutting
tools. They are precision designed to fit your
OEM equipment to proivde a long cutting life.
Edger Blades
102-1211
21MM All Materials, ROUGH
102-1212
102-1213
21MM WHOLES/TRIVEX, ROUGH
102-3210
21MM FV4-120 ANGLE, ALL MATERIALS
Santinelli
159-1210
21MM GLASS, ROUGH
159-3181
18MM ALL MATERIALS, FV120-4 ANGLE
159-7182
18MM POLISH WH (V IN 4.3), PVF-115 4 ANGLE
AITMK,V DX, XL& DIMENSION ONE(D R146/
F153-B25.4)
102-1210
21MM GLASS/PLASTIC, ROUGH
B
R
I
O
4000,5000,6000,SCANFORM,ECOSCAN
Construction: Aluminum hub, non-corrosive,
Quality carbide and polycrystalline diamond diamond matrix alloy 75 concentration diacutter blades for National Optronics Edgers
monds. Features: High Performance, speed
119 carbidge for 6E, 6ES, 7E and 7EA edgers
balanced long lasting high polish luster
129 PCD for 6ES and 7EA edgers
wheels.(Available for other edger models; call
for information.)
Sentilles
Diamond Wheels For Automatic
Edgers
Sentilles
For Optronic edgers, Dimelp-Daytona & AIT
Destiny dry cut edgers - Carbide flutes are
precision ground with a superior polished finish to provide a smooth cut on CR-39, HighIndex and Polycarbonate lenses. Cutter body ACCURA/BRIOT (D110 B19)
only -available for Optronics and Daytona 125-1160
16MM GLASS, ROUGH
edgers.
Carbide cutter flute inserts (set of 2)
9-0095 Cutter body only. Standard for Optronics &
Daytona edgers to mount flutes, except for 9-3150,
9-3151, 9-3230, 9-0700, 9-3242).
9-0200 Daytona Hab Flute
9-0700 Hab Flute-Sport Goggle
9-3120 Hab Flute-standard
9-3150 Horizon III Hab Flute N
9-3151 Horizon III Hab Flute W
9-3160 Groove 0.0026 Cutter Flute
125-1162
125-1202
20MM POLY/PLASTIC, ROUGH 60GRIT
125-1203
20MM FOR TRIVEX, ROUGH W/HOLES
125-3181
18MM ALL MATERIALS, FVF-120 HAB RIMLS
125-7181
18MM POLISH WH (V IN 5), PVF-120 HAB/POLISH
142-1190
19MM GLASS, ROUGH
142-1210
21MM GLASS, ROUGH
142-1212
21MM POLY/PLASTICS, ROUGH BR 60G
142-1213
21MM FOR TRIVEX 60G, ROUGH W/HOLES TVX
142-3170
17MM ALL MATERIALS V 5.7 IN, FVF-120 HAB RMLS
142-3171
17MM ALL MATERIALS, FV4-120 ANGLE 5.7 IN
142-3190
19MM GLASS, FV4-120 ANGLE 5.7 IN
142-3191
19MM ALL MATERIALS V 5.7 IN, FVF-120 HAB RMLS
142-3212
142-3213
142-7170
17MM GLASS V5.7 IN, PVF-120 HAB/POLISH
142-7211
21MM ALL V5.7 IN, PVF120 HAB/POLISH
GERBER
COBURN/ESSILOR (D155B20)3WHL PROFILE-DIGI/SCAN-ALPHAA complete line of diamond edger wheels
GAMMA KAPPA-SPARTAN-TITAN-TRIUMPH
proven to have a longer life and faster cutting AIT/OPTI-VUE BEVEL EDGER (D R146.8/ 145-1150
15MM GLASS, ROUGH
F153.4-B25.4)
ability. Retruing service available.
PSI
Sure Cut© Flute Inserts
128-1150
16MM ALL MATERIALS, ROUGH 2000
129-1190
19MM GLASS, ROUGH
129-1191
129-1192
129-1193
129-3160
129-5190
19MM GLASS/PLATICS, FVF-120 HAB RIMLS
GERBER
COBURN - INDOMATIC
PROFESSIONAL (2wh-42) & ELITE (3or 4wh70) (D110-B25)
AIT MARK V, SUPER DYNAMITE, XL, BEVEL
EDGER
101-1150
15MM SB
101-1151
15MM BB
101-1152
15MM BR
101-3161
16MM BB
101-5150
15MM SB
33
T
124-1120
22MM GLASS, ROUGH
124-1150
15MM GLASS, ROUGH
124-1151
124-1160
16MM GLASS, ROUGH
124-1161
124-1180
18MM GLASS, ROUGH
124-1181
124-1183
124-1222
22MM POLYPLASTICS, ROUGH 60
124-1223
22MM FOR TRIVEX, ROUGH W/HOLES 60G
124-2220
22MM GLASS, FV4-115 ANGLE
124-3120
124-3122
124-3180
124-3200
124-3201
124-3220
124-3221
12MM ALL MATERIALS, FV4-120 ANGLE
124-4200
124-5200
20MM GLASS, FVF-120 HAB RIMLS
BRIOT V2000, U2000, G3000, N2000, N3000
120-2150
15MM SB GLASS/PLASTICS, ROUGH w/ HUB
120-3190
19MM SB GLASS/PLASTICS, SPECIAL BEV RIMLESS
145-1152
145-1153
15MM FOR TRIVEX, ROUGH W/HOLES TVX
145-1220
22MM GLASS, ROUGH
145-1222
22MM POLY/PLASTICS, ROUGH 60 GRIT
145-1223
22MM POLY ONLY, ROUGH
145-3220
22MM GL/PL(CX3020) 7IN, FVF-120 HAB RIMLESS
145-3221
22MM ALL (CX3020) 7IN, FVF-120 HAB RIMLESS
145-7151
15MM ALL MATERIALS, FVF-120 HAB POLISH
145-7227
22MM ALL (CX3029 P) V 7IN, PV4-120 ANGLE POLISH
145-7377
37SMM MS2-V7 FIN22/POL 15, FPVF-120 HAB
POLISH
145-7447
44SMM MS2-V7 FIN22/POL 22, FPVF-120 HAB
POLISH
HOYA - ACCEL
143-1163
16MM for TRIVEX 60, ROUGH POLY/PLAS
143-1183
188MM for TRIVEX 60, ROUGH
143-7401
40SMM FIN20/POL20 SET, FPVF-120 FINV/POLV
143-7441
44SMM FINSS/POL20 SET, FPVF-120 FIN/POLV
146-1160
16MM GLASS, ROUGH
INDOMATIC- AITMAXIMA (3 or 4 wh-70)
(D110-B25)
140-1160
16MM SB GLASS, ROUGH
140-1162
16MM BR POLY/PLASTICS, ROUGH 60 GRIT
140-1192
19MM SB GLASS, ROUGH
140-1302
30MM BR POLY/PLASTICS, ROUGH 60 GRIT
140-2192
19MM BR POLY/PLASTICS, ROUGH W/UC 60 GRIT
140-2193
19MM BR W/HOLES/TRIVEX, ROUGH TRIVXE 60
140-3160
16MM SB GLASS 120V IN 4.7, FVF-120 HAB RIMLESS
140-3161
16MM BB ALL (V 120IN 4.7), FVF-120 FLAT RIMLESS
140-7161
16MM V120 1N 4.7 POL WHL, PVF120HAB RMLS
POLISH
140-7320
32SMM MS2 V112 1N 4.7 POL, PVF-112HAB V16/
10/12/11 11:02 AM
34
P16SET
140-7440
44SMM MS2 V120 1N 6.7 POL, PVF-120HAB V22/P22
140-7441
44SMM MS2 V120 1N 4.7 POL, ROUGH 70/80
NIDEK-SANTINELLI (AlsoTOPCON ALE3700)
7070, 8000, 8080, 9000SX & ALE5000
(D100-B20)
157-1120
12MM GLASS, ROUGH
157-1122
12MM POLY/PLASTICS, ROUGH 60
157-1123
12MM FOR TRIVEX, ROUGH TVX W/HOLES
157-1171
157-1172
17MM POLY/PLASTICS, ROUGH 60G
157-1173
17MM FOR TRIVEX 60, ROUGH TVX W/HOLES
157-1221
22MM SGLASS, ROUGH
157-1230
23MM GLASS/PLASTICS, ROUGH
157-1233
157-1236
157-2172
157-3171
17.5MM ALL MATERIALS, SPECIAL FV4-120 5 IN
157-3230
23MM GLASS/PLASTICS, FV4-120 ANGLE 5 IN
157-3231
23MM ALL MATERIALS, FV4-120 ANGLE 5 IN
157-7171
17MM POL POLISH WHEEL, SPECIAL PV4-120 5 IN
157-7357
34MM FIN/POLISH 2WH 5 IN, FPV FV17.5/PV17.5 SET
159-1222
22MM POLY/PLAS 9090, ROUGH-60/60X22X14
159-3181
18MM ALL-9090 EDGER, FV110-4 ANGLE 5 IN
159-7181
18MM PV WH-9090EDGER, PV110-4 ANG POLISH 5
IN
NOVAMATIC / TAKUBOMATIC
(D100-B50)
148-1182
148-1183
18MM FOR TRIVEX 60, ROUGH W/HOLES
NOVAMATIC / TAKUBOMATIC (D100-B50)
147-1221
22MM ALL MATERIAL 700, ROUGH
147-3141
14MM ALL MATERIALS 700, FV4-120 ANGLE
148-1223
22MM FOR TRIVEX 60, ROUGH W/HOLES
148-1226
NOVAMATIC / TAKUBOMATIC (D100-B50)
146-1180
18MM GLASS 600, ROUGH
146-3220
22MM ALL MATERIAL, FV4-120 ANGLE
148-1220
148-3140
148-3181
18MM GLASS/PLASTIC, FVF-V120 W/FLAT HAB
WECO ALL MODELS and COBURN IQ
EDGER ALUMINUM HUB FINISHING WHEEL
SERIES (R110-B20)
463ABCD,461,486A&B,440,480,2440,C90/91,
ZET90&91
20MM ALL MATERIALS, FV4-120/ANGLE 6IN
172-3220
22MM GLASS/PLASTIC, FV4-120/ANGLE 6 IN
172-3250
172-3251
25MM ALL MATERIALS, FV4-120/ANGLE 9 IN
172-6150
15MM GLASS/PLS, FF-FIN FLAT-RIMLESS
172-6151
15MM ALL, FF-FIN FLAT-RIMLESS
172-6251
25MM ALL “SPECIAL”, FF-FLAT FINISH RIMLS
172-7106
10MM ALL, PF-FLAT RIMLS POLISH
172-7152
15MM ALL-V 6 IN, PV4-120ANGLE POLISH
172-7156
15MM ALL, PF-FLAT RIMLS POLISH
172-7202
20MM ALL- V 6 IN, PV4-120ANGLE POLISH
172-7301
30SMM 15FIN/15POL SET, FPF-FIN POLISH FLAT
172-7302
30SMM 15 FIN/15 POL SET, FPV4-112 ANGLE 6IN
172-7303
18MM ALL MATERIALS, ROUGH NU
172-1183
18MM FOR ALL MATERIALS, ROUGH TVX 60 W/
HOLES
172-1184
18MM POLY/PLASTICS, ROUGH 60 GRIT NU
172-1200
20MM GLASS/PLASTIC, ROUGH NU
172-1201
172-1202
22MM GLASS/PLASTIC, ROUGH NU
172-1203
20MM FOR TIVEX/PLY/PLS, ROUGH 60W/HOLES
172-1381
172-2180
18MM GLASS/PLASTIC, ROUGH W/ UC
172-2181
18MM ALL MATERIALS, ROUGH W/UC
172-2182
18 POLY/PLASTICS, ROUGH 60 GRIT W/UC
172-2200
20MM GLASS/PLASTIC, ROUGH W/UC
172-2201
20MM ALL MATERIALS, ROUGH W/UC
172-2212
21MM POLY/PLASTICS, ROUGH 60 GRIT W/UC
Diamond Wheels For Hand Edgers (Non-Retruable)
Sentilles
A variety of 1.50” wide single grit electroplated diamond wheels are available for, plastic
and poly lenses with or without “V”groove.
The 1.75” wide dual grit wheel has both
WECO ALL MODELS and COBURN IQ wheels flat and “v” groove. The SS 600 Grit
EDGER ALUMINUM HUB FINISHING WHEEL wheel for glass and plastic has a stainless
SERIES (R110-B20)
steel rim that does not rust and extends wheel
172-3150
life. These 6” Diameter 1” bore wheels will fit:>
15MM GLASS/PLASTIC, FV4-110/ANGLE 6IN
SOS 200 & 201, NOVAMATIC EDGE & EDGE II,
172-3151
NU-TEC GRINDRITE, DIMELP/EDGEMASTER
AVANTI, OC DESIGN DIAMONDMITE - PLUS
172-3180
OTHERS . Mastercard and Visa Accepted.
18MM GLASS/PLASTIC, FV4-120/ANGLE 6IN
Regular
282-105360 360 Grit HAB
282-1150600 600 Grit HAB
282-2110360 360 Grit Flat
282-2110360S 360 Grit Flat
Groover Wheel Bonded Diamond
Sentilles
Diamond Wheels for Hand Edgers
(Non-Retruable)
Sentilles
Re-truable, bonded diamond wheel, to fit SOS
Shurgroove, Nu-Tec Grooverite, Novamatic
Groovemaster, Briot, Coburn A G-5, AIT,
Takubomatic groover and other similar
groovers that require an angled wheel. These
wheels are used by the high volume laboratory as well as the professional dispensing
labs. Part #69-1223 Groover wheel solid,
angled 25mm.
WECO
EDGERS
&
COBURN
IQ A variety of 1.50” wide single grit electroplat- Contact Sentilles for current pricing.
EDGER(D110-B20)
(ALUMINUM HUB ed diamond wheels are available for, plastic
Groover Wheel-Wide Groove 1mm
ROUGHING WHEEL SERIES)
and poly lenses with or without “V”groove.
Plus
88,463,461,486,440,480,2440,C90 &91,ZET-90 The 1.75” wide dual grit wheel has both
& 91
wheels flat and “v” groove. The SS 600 Grit
Sentilles
172-1150
wheel for glass and plastic has a stainless
steel rim that does not rust and extends wheel
88,463,461,440,480,2440,C90&91,ZET-90 & 91 life. These 6” Diameter 1” bore wheels will fit:
172-1151
SOS 200 & 201, NOVAMATIC EDGE & EDGE II,
NU-TEC GRINDRITE, DIMELP/EDGEMASTER
172-1153
AVANTI, OC DESIGN DIAMONDMITE - PLUS
172-1155
OTHERS. Mastercard and Visa Accepted.
Notes: *100mm Wheel also known as 4”
172-1180
wheel; **Resin Bond Wheel for all plastic type
18MM GLASS/PLASTICS, ROUGH NU
lenses
172-1181
170-3150
15MM GLASS/PLASTIC, SPECIAL V- STL 2PC A
170-3180
170-3200
172-7351
172-7352
172-7401
40SMM 20 FIN/20 POL SET, FP FLAT FIN/ POL RMLS
172-7402
40SMM 20 FIN/20 POL SET, FPV4-112 ANGLE 6 IN
172-7403
172-3181
172-3200
172-3201
282-2130600 600 Grit Flat
282-360600 360/600 Dual (6x1.75), (1-3/4” x 6” dia. w/
1” bore)
Stainless
282-1050360S 360 Grit HAB
282-1150600S 600 Grit HAB
282-2130600S 600 Grit Flat
Regular Wheel (Plastic and Poly)
282-11506000 600 Grit HAB EP
282-1400 400 Grit HAB EP
282-2110360 360 Grit Flat EP
282-2130600 600 Grit Flat EP
282-360600 360/600 Dual Grit EP, (6” x 1.75”)
Stainless Steel Wheel (Glass & Plastic)
282-1150600S 600 Grit HAB SS
Some of the newer specialty frames and the
new titanium frame require a wider groove.
This wheel will cut a groove over 1mm wide in
lens to accommodate these frames.The wheel
fits Novamatic Groovemaster, Nu-Tec
Grooverite, SOS Shurgroove, Briot, Coburn
Hand Edger Bonded Diamond Wheels
AG-5, AIT Takubomatic and other similar
Products are listed by Part No., Wheel Size, groovers that require an angled wheel. This
wheel is slotted to reduce friction heat buildWheel Type, Grit Sizes and Price
AIT & NU-Tec Grindrite II; SOS Sure Edge 8135,
up, especially in Polycarbonate lenses. Part
Smoothy & NH-30, NH-35
#69011 Wide groove wheel slotted, angles
315-1_ 100mm* x 30 x 1”, Flat, 200, 300, 400, 500
25mm.
315-5_ 100mm* x 35 x 1”, HAB, 200, 300, 400, 500
315-6_ 100mm* x 35 x 1”, Dual, 200, 300, 400, 500
AIT 307
307-2_ 7 x 1 x 5/8, Flat, 200, 300, 400, 500, 600
307-4_ 7 x 1 x 5/8, HAB, 200, 300, 400, 500, 600
AIT 323/324
304-1_ 6 x 3/4 x 5/8, Flat, 200, 500
304-3_ 6 x 1 x 5/8, Flat, 200, 300, 400, 500, 600
304-4_ 6 x 1 x 5/8, HAB, 200, 300, 400, 500, 600
AIT 325
305-76 6 x 5/8, Face, 600
AIT Handmate, Avanti HE, Franel KN2000, OC
Design, Diamondmite, NU-Tec Grindrite, Novamatic
Edge I&II, SOS 200, 201 & 2001
313-1_ 6 x 1 x 1, Flat, 200, 400, 500
313-2_ 6 x 1 x 1, HAB, 200, 300, 400, 500, 600
313-3_ 6 x 1.5 x 1, Flat, 200, 300, 400, 500, 600
313-4_ 6 x 1.5 x 1, HAB, 200, 300, 400, 500, 600
313-5_ 6 x 1.75 x 1, Dual, 200, 300, 400, 500, 600
314-3_ 6 x 1.5 x 1, Flat, 200, 300, 400, 500, 600
314-4_ 6 x 1.5 x 1, HAB, 200, 300, 400, 500, 600
314-5_ 6 x 1.75 x 1, Dual, 200, 300, 400, 500, 600
Briot Rex Hand Edger
308-1_ 165 x 22 x 20 (mm), Flat, 400, 600
308-2_ 165 x 38 x 20 (mm), HAB, 600
308-4_ 165 x 50 x 20 (mm), HAB, 600
Coburn R5D
309-1_ 8 x 1 x 3/4, Flat, 200, 300, 400, 500, 600, 800
309-4_ 8 x 1 x 3/4, HAB, 200, 300, 400, 500, 600, 800
Essilor MS Hand Edger
317-7_ 140mm x 25 x 20, Face, 200, 300, 400, 500,
600, 800
Nestor CH Model Edger
316-636 8 x 1.5 x .75, Dual, 400F, 600V
OWC/OMI 95 (Undercut)
310-1_ 6.5 x 1 x 1/2, Flat, 200, 300, 400, 500, 600
310-2_ 6.5 x 1 x 1/2, HAB, 200, 300, 400, 500, 600
310-3_ 6.5 x 1 x 1/2, Flat, 200, 300, 400, 500, 600
310-5_ 6.5 x 1 x 1/2, HAB, 200, 300, 400, 500, 600
Shuron 167
311-1_ 6 x 1 x 3/4, Flat, 200, 300, 400, 500, 600
311-4_ 6 x 1 x 3/4, HAB, 200, 300, 400, 500, 600
Weco 170, 175, 270 & 590
312-1 90mm x 22 x 20, Flat, 500
312-45 90mm x 22 x 20, HAB, 500
312-5_ 150mm x 22 x 20, Flat, 200, 300, 400, 500, 600,
800
Resin Bonded Diamond Wheels For
Hand Edgers - (For Plastic & Poly
Lenses)
Sentilles
Resin has proven to be an excellent bonding
material for diamond wheels used for resin
lens materials. Resin Bond diamond wheels
will not rust from water use, such as seen with
Electroplated wheels, but Allows cost to be
well below that of brass bonded wheels, and
still be retruable. Resin bond wheels are available in a wide range of single grits in both 6.50
x1” wide and 6”x1.50 wide either flat or with V
groove, also dual grit in 6” x 1.75 wide. All grit
size available. Mastercard and Visa Accepted.
OWC/OMI 95 EDGER, USES 6.50 X 1.O WIDE
310-55 SINGLE GRIT 500 HAB
3310-33 SINGLE GRIT 325 FLAT
Size: Single Grit 6 x 1.50 wide — Dual Grit 6 x
1.75 wide
SOS 200, Novamatic Edge & Edge II, Nu-Tec
Grindrite, Dimelp Avanti, OC Design Diamondmite
plus others Use 6.0 x 1.50 x 1.0
314-55 SINGLE GRIT 500 HAB
314-635 DUAL GRIT 325F/500V
SOS 200, NOVAMATIC EDGE, NU-TEC GRINDRITE,
DIMELP AVANTI, 0C DESIGN, ETC.
314-33 SINGLE GRIT 325 Flat
10/12/11 11:02 AM
NID-17-R-GP ROUGHING FOR GLASS 17mm
70041 Black Dressing Stick ea.
70042 Dark Gray Dressing Stick ea.
NID-17-R-BR-60 ROUGHING FOR POLY/ A00530 Brown Dressing Stick ea.
PLASTIC 17mm
A00531 White Dressing Stick ea.
NID-17-R-BR-TRI-60 TRIO ROUGHING FOR
TRIVEX/POLY/PLASTIC 17mm
Superabrasive, Inc.
35
Dressing Sticks for Edgers
Sentilles
A00532 Gray Dressing Stick ea.
Belrose Dressing Sticks
Belrose
NID-22-R-BR-60 ROUGHING FOR POLY/
PLASTIC 23mm
NID-22-R-BR-TRI-60 TRIO ROUGHING FOR
NID90-22-R-BR-60 NIDEK 9090 ROUGHING
FOR POLY/PLASTIC 22mm
NID90-22-R-BR-TRI-60 NIDEK 9090 TRIO
ROUGHING FOR TRIVEX/POLY/PLASTIC
Superabrasive’s edger wheels feature high 22mm
speed, clean lens finish and long tool life. NID-17.5-F4-B
FINISHING
FOR
ALL
Available for all popular edgers, including MATERIALS 17.5mm
Nidek, Essilor, Gerber, Briot, Weco, Indo, AIT,
Huvitz,
Novamatic/Takubo,
etc. NID-17.5-P4-POL NIDEK POLISHING WHEEL
Superabrasive’s Trio wheel is the best on the 4-ANGLE 17.5mm
market for cutting Trivex lenses and is recom- NID-23-F4-S FINISHING FOR GLASS 23mm
mended by many lens manufacturers. For
pricing and specials, please call 800-987-8403 NID-23-F4-B FINISHING FOR ALL MATERIALS
23mm
or email to [email protected].
Dressing sticks for all edgers, available in
several sizes and grits. Sharpens roughing
and finishing wheels to prolong wheel life.
1200-30020 Red Dressing Stick Roughing,
1200-30021 White Dressing Stick Finishing,
For truing and dressing diamond wheels with
1200-30021F Grey Dressing Stick Hand
minimum wear. Helps reduce breakage.
Keeps wheels sharp and free-cutting. 6” x Edgers.
1/2” x 1/2”. Credit cards accepted.
Tan stick (roughing) . . . . . . . . . . . . . . . . . . . . . $3.00 ea.
White stick (finishing) . . . . . . . . . . . . . . . . . . . $3.00 ea.
Dressing Sticks
Dressing Hones
Vigor Optical
DAC Vision
BRA-16-R-GP ROUGHING FOR GLASS 16mm NID90-18-F4-B NIDEK 9090 FINISHING
WHEEL FOR ALL MATERIALS 18mm
BRA-16-R-BR-60 ROUGHING FOR POLY/
NID90-18-P4-POL NIDEK 9090 POLISHING
PLASTIC 16mm
18mm
BRA-20-R-BR-60 ROUGHING FOR POLY/
WECO
PLASTIC 20mm
BRA-20-R-BR-TRI-60 TRIO ROUGHING FOR WE-15-R-GP ROUGHING FOR GLASS 15mm
WE-15-R-BR-60 ROUGHING FOR POLY/
BRA-18-FV-B FINISHING FLAT-V FOR ALL PLASTIC 15mm
MATERIALS 18mm
WE-15-R-BR-TRI-60 TRIO ROUGHING FOR
BRA-18-PV-POL POLISHING FLAT-V 18mm
ESSILOR Triumph, Kappa, Gamma, Spartan
WE-18-R-GP ROUGHING FOR GLASS 18mm
ES-15-R-GP ROUGHING FOR GLASS 15mm
PLASTIC 18mm
ES-15-R-BR-60
PLASTIC 15mm
ROUGHING
FOR
POLY/
WE-18-R-BR-TRI-60
ROUGHING
FOR
ES-15-R-BR-TRI-60 TRIO ROUGHING FOR
WE-20-R-GP ROUGHING FOR GLASS 20mm
ES-22-R-GP ROUGHING FOR GLASS 22mm
PLASTIC 20mm
ES-22-R-BR-60 ROUGHING FOR POLY/
WE-15-F4-S FINISHING 4-ANGLE FOR
PLASTIC 22mm
GLASS 15mm
ES-22-R-BR-TRI-60 trIO ROUGHING FOR
WE-15-F4-B FINISHING 4-ANGLE FOR ALL
MATERIALS 15mm
ES-15-PV-POL POLISHING FLAT-V 15mm
WE-15-FF-S FINISHING FLAT FOR GLASS
ES-22-FV-S FINISHING FLAT-V FOR GLASS 15mm
22mm
WE-15-FF-B FINISHING FLAT FOR ALL
ES-22-FV-B FINISHING FLAT-V FOR ALL MATERIALS 15mm
MATERIALS 22mm
WE-10-PF-POL POLISHING FLAT 10mm
ES-22-PV-POL POLISHING FLAT-V 22mm
WE-15-PF-POL POLISHING FLAT 15mm
GERBER Professional, Elite
WE-15-P4-POL POLISHING 4-ANGLE 15mm
GER-19-R-GP ROUGHING FOR GLASS 19mm
WE-18-F4-S FINISHING 4-ANGLE FOR
GER-21-R-GP ROUGHING FOR GLASS 21mm GLASS 18mm
ST-270 1/2” x 1/2” x 6” Silicon Carbide Fine
ST-271 1/2” x 1/2” x 6” Silicon Carbide Medium
ST-272 3/4” x 3/4” x 4”, Aluminum Oxide
ST-275 1/2” x 3/4” x 4”, Aluminum Oxide
ST-276 1/2 x 1/2 x 6 Silicon Carbide
Diamond Pen ST-902
Optical Machinery
Vigor offers 4 grits of dressing sticks. A new
10.400 green for the finish wheel. 400 grit 12”
x 8.25” x 10.25”. The 10.404 tan stick for
roughing 60 grit. 6”x1/2’x1/2”. The 10.406
white for finishing 100 grit 6”x1/2’x1/2” and
10.411 White 320grit.6”x1/2’x1/2” . . . . . $16.50
Lens & Frame Gauges
ST-500 Opti-Speed® Circumference
Measure
DAC Vision
Press Diamond pen lightly on “V” or HAB
wheel from top to bottom of “V”. The side
dressed will cut less aggressively, and therefore move the bevel in that direction. For use
on diamond-impregnated wheels.
Diamond Tip Dressing Pencil
OWC
Our Opti-Speed® circumference measure is
easy to use. Just place a lens inside the tape
and pull. Provides a circumference measurement of the lens. This measurement provides
GER-21-R-BR-60 ROUGHING FOR POLY/ WE-18-F4-B FINISHING 4-ANGLE FOR ALL
for an accurate edger setting and eliminates
MATERIALS 18mm
PLASTIC 21mm
SS95820 Red Dressing Stick (4” x 3-2/5” x improperly finished lenses. ST-500 OptiGER-21-R-BR-TRI-60 TRIO ROUGHING FOR WE-20-F4-S FINISHING 4-ANGLE FOR 1/2”) for dressing bonded rough wheels.
Speed Circumference Measure; ST-500T
GLASS 20mm
S95830 White Dressing Stick (6” x 3/4” x 1/4”)
Replacement tape only.
GER-17-F4-B FINISHING 4-ANGLE -V FOR WE-20-F4-B FINISHING 4-ANGLE FOR ALL for dressing finish wheels.
MATERIALS 20mm
ALL MATERIALS 17mm
GER-17-F4-S FINISHING FOR GLASS 17mm
GER-19-F4-B
FINISHING
MATERIALS 19mm
FOR
ALL
GER-21-F4-B
FINISHING
MATERIALS 21mm
FOR
ALL
WE-20-P4-POL POLISHING 4-ANGLE 20mm
Tuff-Sticks
ST-41 Hand Axis Gauge
PSI
Optical Machinery
Dressing Sticks (Edger Tools)
Dressing Sticks
A.I.T. Industries
GER-17-P4-POL POLISHING 17mm
GER-21-P4-POL POLISHING 21mm
NIDEK LE9000, ME1000, LE7070, SE9090
Diamond wheel honing sticks keep diamond
wheels sharp and free-cutting. Help reduce
Keep your wheels sharp and free-cutting with breakage and increase production. Eliminate
NID-12-R-BR-60 ROUGHING FOR POLY/
the proper grit dressing stick. Call us to advise dull wheel problems. 1/2” x 3/4” x 6”. 806 80
PLASTIC 12mm
which is best suited for you. We have sticks grit, generator.
NID-12-R-BR-TRI-60 TRIO ROUGHING FOR for polishing wheels, hand edger wheels, 808 220 grit finishing
edger wheels and generator wheels.
Just like the above double axis gauge accommodating one lens at a time; good for the
edger area to verify axis during daily maintenance check; available in all current blocking
configurations.
ST-41 Single Blocked Lens Axis Gauge
10/12/11 11:02 AM
36
Protractor for Multifocal Layout
Lens & Frame Gauges
Sentilles
ST-41-6 Double Axis Gauge
locates the major reference point (“fitting
dressed to ensure maximum grinding effi-
cross”) and measures the cross height from ciency. Normal 48-hour turn-around service.
the bottom of the eyewire on progressive Contact PSI for current pricing.
lenses. 6”w x 2-1/2”h x 6”d.
Retruing Service
2062 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39.00
Optical Machinery
Superabrasive, Inc.
Replacement Parts (Edgers)
Belts for Edgers and Groovers
Sentilles
This transparent cellulose protractor is great
for manual layout of multi-focal lenses. Grid
clearly defines 360 axis and decentration in
1mm increments up to 12mm right or left, and
seg below or high up to 16mm in 1mm increThis axis gauge will verify cut axis for both ments. Just place lens over protractor and
sides of the Rx; excellent for drill mount layout mark. 5” x 5”. #1-51060.
axis verification and with the scribed grid Contact Sentilles for current pricing.
Gauge
maintain consistency in hole or notch placement; brass block insert available for all curVigor Optical
rent block configurations, including AIT,
Coburn, Gerber 2, INDO, Kappa, Shuron,
Semi-Tech and WECO.
ST-41-6 Double Blocked Lens Axis Gauge
Drilled Rimless Gauges
Precision Tool
Indicates if either lens is off axis. Allows
checker to see if optical centers are correct,
verifies PD, DBL, segment heights. Made of
transparent plastic.
35.212. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $40.50
Reduced Price!
Len’s Hole & Nut Gauge 35.175
Superabrasive offers high quality diamond
wheels for all popular generators, automatic
edging and hand edging machines. Our metal
Belts for edgers and groovers include popular bonded wheels feature the thickest diamond
models listed below; call for others.
layer in the industry, and provide a great per1001-20045 IT Mark V timing belt
2000-224 Dimelp 2000 V belt set of 2
3132-0120 Weco 440 V drive belt
3132-0120 Weco 480 V belt
3132-0120 Weco 486 V drive bel
3132-0122 Weco 461 V drive belt
3132-0206 Weco 486 timing belt
3132-0208 Weco 461 V belt
3132-0209 Weco 486 timing belt (2
3132-0210 Weco 486 timing drive bel
42-08877 CMV/Silor MBX timing belt
42-08878 CMV/Silor MBX timing belt
463-30012 463-30012, Weco 463 V belt set of 2
8061-G-79 NOVAMATIC groover belt
formance and long tool life. Retruing/redressing service is available at a minimum fee. For
more information, call 800 987 8403. $20.00ea
for Superabrasive and $50.00ea for other wheels
Test Lenses
Polycarbonate Test Squares
Sentilles
Bulbs for Edgers
Sentilles
Vigor Optical
Precision’s Drilled Rimless Gauge Set takes
the guesswork and spoilage out of sizing
drilled rimless lenses. Self-indexing, each
gauge has 6 consecutive, 0.05mm incremental pins. Set ranges from 1.00mm to 2.45mm.
Gauges sold separately or in set of 5.
Polycarbonate squares are flat 3mm thick and
66mm square. Inexpensive and highly accu-
Lens Alignment Gauge
Precision Tool
rate for setting and checking axis on equipment. Great for testing scratch resistance and
Bulbs for automatic edgers include popular
Small convenient gauge for measuring nut models listed below; reference OEM manual tintability coatings, as well as coating spread
and len’s hole diameters. 10 sized spokes for or call for others.
and adhesion. Packed in removable protec1.0mm to 2.2mm sizes. . . . . . . . . . . . . . . $18.00 3561-0215 Weco 2440 push button switch bulb
tive covering. Just peal and use. 3mm thick,
3561-0215 Weco 440 push button switch bulb
2062A Rx Verifier
Western Optical
463-30015 Weco 463 AB MKS pilot bulb
463-30015 Weco 463 CDE PWS PB switch bulb
66mm wide x 66mm long.
#1-4502
Truing Devices
Retruing Services for Edgers
The Lens Alignment Gauge by Precision Tool
Technologies allows a quick and accurate
check for axis and power alignment before the
edging process is initiated. Use after edging
Use the removable grid on the clear acrylic
to detect any slippage. Costly blocking errors background to measure seg heights, binocuare detected and re-work prevented.
lar PD and verify that the segs are straight.
The Aquasizer
PSI
Retruing Service
Polycarbonate Lens Squares
Sentilles
A.I.T. Industries
2062A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $27.00
Multifocal Aligner
Western Optical
polycarbonate squares are flat at 3mm thick
Reconditioning of diamond generators and
edger wheels. Retruing restores wheels to
original geometry. We will inspect for out-ofroundness, depth of diamonds, and out-ofbalance, and correct accordingly.
and 66mm square. Inexpensive and highly
coating spread and adhesion. packed in
Used to measure circumference of an edged
Retruing Service for Edger Wheels
lens. Clear and accurate. Lenses may be meaVerify measurements on progressive, bifocal
PSI
sured with or without a block affixed. 10”.
and trifocal lenses. Use the removable grid on
422
clear acrylic to measure seg heights and bin- 100% reconditioning of diamond generator
422T Aqusizer Tapes only
ocular PD and to verify that the segs are and edger wheels. Retruing of radius and
straight. The stationary centration chart surfaces. Each wheel is abrasive-stickFor ordering information, please see the Manufacturers and Distributors Guide.
accurate for setting and checking axis on
equipment. Great for testing scratch resistance and tintability of coatings, as well as
removable protective covering. Just peal and
use. 3mm thick, 66mm wide x 66mm long.
#1-4502. Polycarbonate Test Squares (minimum 25).
10/12/11 11:03 AM
FINISHING TOOLS
Screw Catcher
Adhesives
Vigor Optical
damage due to premature de-blocking. Tak
anti-slip film is available in rolls of 500 and in
two shapes: 25x38 Oval and 25x38 Diamond
with a center hole.
Contact Salem for current pricing.
Grobet Lock Tight
Vigor Optical
Broaches/Tap Holders
Broach Sets
Vigor Optical
37
ting technology. *Ask about our retruing service: This 11-Flute Carbide Ball Cutter has a
semicircle shape at the top and can be sharpened up to 6 times, or until it is ground down
to approximately 18.2 mm and needs replacement. We also offer the 12-Flute (product
code:
99-12FLUTECUT)
and
3-Flute
(99-3FLUTECUT). The 3-Flute only allows up
to 3 cutting services. We will inform you if your
Carbide Ball Cutters cannot be sharpened
anymore.
99-11FLUTECUT
12-Flute Ball Cutter
A magnetic dispensing pad which will attract
magnetic sensitive screws and prevent their
rolling. Even screws that are not magnetically
sensitive do not roll away as fast when screw
insertion is performed over this pad. 8” x 10”. Assortments of cutting broaches complete
Precision applicator controls both the amount 61.199. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12.00
with handle and plastic tube. 12 per unit.
of the glue dispensed and where it is applied. Reduced Price!
15.501 Assorted, sizes 30-70 . . . . . . . . . . . . . . . $37.00
1/3 fl.oz. tube has a long life. The user has
2100 Rubber Guard Bench Block
Broaches
better control. Bonds better than Vigor Liquid
Western Optical
Vigor Optical
OptiSource
Lock Nut. 1oz.
12.205. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.00
Anvils
Optician’s Anvil
Vigor Optical
Lens cutting broach, 3”l (7.6cm), fits standard The Poly Crystalline Ball Cutter (PCD) is a
Carbide Ball Cutter that is impregnated with
machines. Tapers from size 52 to fine point.
15.515. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $16.00 diamonds that do the cutting. Carbide Ball
Cutters look like metal lollipops with multiple
Handles & Holders
cutting blades attached to it. Only Vista
Vigor Optical
Machinery and Gerber Machinery use this cutting technology. *Ask about our retruing service: This 12-Flute Carbide Ball Cutter has a
flat line on the top and can be sharpened up
Rubber guard protects eyewear and counterto 6 times, or until it is ground down to
tops from damage while making frame adjustments Screws provided for mounting. 3” Two reversible collets for holding bits, taps, approximately 18.2 mm and needs replacement. We also offer the 11-Flute (product
Long.
wire or screwdriver blades from smallest sizes
2100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.00
code:
99-11FLUTECUT)
and
3-Flute
up to 1/8” (3.2mm). 4”l, 5/16”dia. 3/4” swivel
Replacement Part:
(99-3FLUTECUT). The 3-Flute only allows up
2100R Rubber Pad . . . . . . . . . . . . . . . . . . . . . . . . $3.75 head.
to
3
cutting
services.
We
will
inform
you
if your
58.222 For hand drill . . . . . . . . . . . . . . . . . . . . . . . $6.00
2101 Bench Anvil Kit
Reduced Price!
anymore.
Western Optical
Handles & Holders
Vigor Optical
All-purpose anvil and riveting block. Provides
99-12FLUTECUT
3, 11, 12- Flute Ball Cutter Sharpening
quick and easy method for screw adjustments
OptiSource
and many other staking and riveting requirements. Four graduated holes, polished surface and tapered stake. Specs: 1-3/4” x 1-1/2”
(4.4cm x 3.8cm).
Broach or tap holder, 2 jaw, singe end,
0-1.2mm and 1.2-2mm capacity. 4”l (10.2cm).
12.310. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.00
58.250. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12.00
Reduced Price!
Reduced Price!
Bench Aids
Acetone Dispenser
Vigor Optical
Western’s new bench Anvil Kit provides an
angled, comfortable surface on which to place
a frame when inserting eyewire and hinge
screws and making general repairs. Stop
hunching over a rubber bench block and
instead work comfortably from your tabletop.
The “Third Hand” feature of the Bench Anvil
includes three nut wrenches, one Phillips/Flat
screwdriver blade, riveting and cupping
points, and solid anvil. Measures 6”w x 5”h x
5”d.
Cutters & Scrapers
Short Oblique Cutter
Dynamic Labs, Inc.
2101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $66.00
Blocking Tapes & Dispensers
Tak Anti-Slip Film
Salem
The Poly Crystalline Ball Cutter (PCD) is a
diamonds that do the cutting. Carbide Ball
Machinery and Gerber Machinery use this cutting technology. *Ask about our retruing service: This 3-Flute Carbide Ball Cutter can be
sharpened up to 3 times. We offer the 11-Flute
(product code: 99-11FLUTECUT) and 12-Flute
(99-12FLUTECUT) which allows up to 6 sharpening services. We will inform you if your
anymore.
Stainless steel pump action lid safely and eas-
Oblique end cutter for use on nickel and softer 99-BALLCUTTER
metals. – New shorter handle.
ily dispenses acetone or any liquid. Also use-
ful for soldering flux. Wipe brush or cloth lid.
Overfill disk prevents spilling. 4oz. capacity.
11-Flute Ball Cutter
3-Flute Ball Cutter
OptiSource
OptiSource
54.415. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $40.00
Reduced Price!
Rubber Covered Bench Block
Vigor Optical
Tak is an adhesive backed anti-slip film for
use specifically on super hydro/oleo phobic
lenses. Its unprecedented adhesion eliminates costly slippage and premature deblocking during the edging process. This new
anti-slip film is applied to the outer-surface of
the lens to produce a stable platform for the
Holds work without marring finish. Cuts for
blocking pad to securely attach. This interface
resting temples.
between lens and blocking pad resists applied
13.210. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.25 forces during the edging process to ensure
Reduced Price!
axis accuracy and to protect the lens from
037-064_SF1110_FinishingTools.indd 37
Machinery and Gerber Machinery use this cut-
Machinery and Gerber Machinery use this cutting technology. *Ask about our retruing serPrices subject to change without notice.
10/12/11 11:04 AM
38
FINISHING TOOLS
vice: This 3-Flute Carbide Ball Cutter can be
sharpened up to 3 times. We offer the 11-Flute
(product code: 99-11FLUTECUT) and 12-Flute
(99-12FLUTECUT) which allows up to 6 sharpening services. We will inform you if your
anymore.
99-3FLUTECUT
Horizon 3 Carbide Cutter Blades are 1” long
and have the “V” bevel on the outer edge of
the blade. Minimum of 2 per order.
Surface Saver Blade
Precision Drilled-Rimless Bites
OptiSource
Precision Tool
99-HORIZON3
Horizon 6E Blades
OptiSource
3M Surface Saver Knife Blade Handle
OptiSource
With the increasing number of lenses requiring backside spin coatings and/or AR treatments, more and more labs are using surface
tape. However, wrinkles in the taping process
causes problems, including potential damage
to a generator’s cutting tool if a lens deblocks.Surface saver blades keep surface
tape cuts clean and precise.
08-99442
Horizon 2 Blades
OptiSource
These are industry standard, disposable,
Carbide Cutting Blades. Cutting Blades are
small rectangular carbide pieces, that have
one angled side, which creates a sharp blade
surface. Only Horizon machinery uses Cutter
Blades. They are designed to achieve approximately 400 cycles before they should be
replaced with a new set. HOWEVER, with our
available Sharpening Service, you can now
have 3 TIMES the usability! After your 400
cycles, call in and/or mail in your Cutter
Blades for a SUPERIOR Sharpening Service.
Carbide Cutter Blades can be sharpened up
to three times with the additional 400 approximate cycles after each. This SAVES time on
calibration and money on shipping. Horizon 2
Cutter Blades are 1-1/4” long. Minimum of 2
per order.
99-HORIZON2
Horizon 3 Blades
OptiSource
With the increasing number of lenses requiring backside spin coatings and/or AR treatments, more and more labs are using surface
tape. However, wrinkles in the taping process
causes problems, including potential damage
to a generator’s cutting tool if a lens deCarbide Cutting Blades. Cutting Blades are
small rectangular carbide pieces, that have blocks.
08-3M9944
Blades. They are designed to achieve approx2088 SWARF Removal Tool
imately 400 cycles before they should be
Western Optical
cycles, call in and/or mail in your Carbide
Cutter Blades for a SUPERIOR Sharpening
Service. Carbide Cutter Blades can be sharpened up to three times with the additional 400
approximate cycles after each. This SAVES
time on calibration and money on shipping.
Horizon 3 Carbide Cutter Blades are 1” long
and have the “V” bevel in the middle of the
blade. Minimum of 2 per order.
99-HORIZON6E
Unique tool for removing the residue resulting
from edging polycarb and Trivex lenses.
Horizon 7E Blades
Curved edges help keep the scrapping blade
balanced on the edge of the lens. Fine,
OptiSource
squared tips for cleaning out the groove of
nylon cord rimless. The Swarf is made in the
USA of spring steel mounted into a nickel
plated steel handle.
2088 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $22.00
Drill Bits
OM-99-SET
Optical Machinery
99-HORIZON7E
PCD Cutter Blades
OptiSource
High quality, long-lasting, doesn’t drift, maintains consistent hole size all describe the
Precision bit. Order in 1.00mm hold size; flute
length is .945’’
Diamond Disc For Cut-Off Or
Grinding
Sentilles
This diamond disc is a must for every opticians work bench for frame repairs.100%
diamond and plated nickel on both faces of
disc. Disc cuts and/or grind better than abrasive disc, and last much longer. Repair frames
made of stainless steel, titanium or other metals. Will cut screws, pad arms, glass or
Plastic. Mandrel is heavy duty and will allow
pressure for cutting or grinding without bending. Disc and mandrel fit DREMEL, FOREDOM,
OR other similar hand held drills. Use both
sides of disc to grind. Always wear ANSI
approved goggles or face shield also mask or
respirator to protect from chips and dust .
Never exceed 20,000 RPM. Master Card and
Visa accepted.
5-0050 Diamond Disc -full face 20 mm
5-0052 Mandrel HD-1/8” shank for 5-0050 disc
Drill Bit Assortment
Vigor Optical
Assortment of different bits and burs to be
used with the OM-99 Lens Drill. Bits and Burs
available in SET or individually.
ST-99A 1.87 mm / .074 in
ST-99B 1.40 mm / .056 in
ST-99C 1.60 mm / .064 in
ST-99D 2.35 mm / .093 in
ST-99E 0.50 mm / .019 in
ST-99F 0.70 mm / .027 in
ST-99G 0.80 mm / .031 in
ST-99H 1.00 mm / .039 in
ST-99S 1.20 mm / .047 in
High-quality, tempered steel, twist drill assortment. 2 each size 53, 55, 56, 58, 60 & 61
28.508. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12.00
Tap & Drill Assortment
Vigor Optical
Precion Drilled Rimles Bites
Precision Tool
Our PCD blades are 100% made in the usa
and will outlast lesser quality imported cutter
blades. They are precision designed to fit your
OEM equipment to provide a long cutting life.
Still using carbide cutter blades in your
Optronics edgers? Carbide blades will last for
approximately 275 cuts and cost $ 15
each(.055 per cut). Our PCD cutter blades will
last for over 12,000 cuts and cost $ 340 (.028
per cut), a 50% savings.
Contains 18 taps and 40 drills packaged with
identification chart. Includes the following
screw taps: TP-12F 1.2mm foreign, TP-13F
1.3mm foreign, TP-14F 1.4mm foreign, TP-16F
1.6mm foreign, TP-127D 1.27mm foreign,
TP-138D 1.38mm domestic; and the following
drills: DR-535/55–size 55, DR-535/56–size 56,
DR-535/58–size 58, DR-535/61–size 61. Ship
The Precision bit: Is High quality, long lasting,
doesn’t drift, maintains consistent hole size. wt. 1lb.
56.200. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $120.00
Order in 1mm hole, Size; flute length is .945
Reduced Price!
10/12/11 11:04 AM
FINISHING TOOLS
Drills & Drilling Equipment
Opera Drill
A.I.T. Industries
39
it works directly off the template lens. No
measuring, and no guesswork required. Key
Features: Precisely aligns and angles holes
directly off the template lens; Very affordable;
Simple, quick operation; Drills hole diameters
up to 2.5 mm; Notching capability; No blocks
required; Small footprint; Light and portable.
Size: 12” W • 12” D • 18” H. Weight: 10 lbs;
Power: 115V, 1A, 60Hz, 1~ (other voltages
available).
category. LessStress II is the highest precision
Hand Drill
instrument available with a long list of stateVigor Optical
of-the-art features including a newly improved
lens mounting system for faster, easier and
more accurate drilling using blocked lenses.
Blocked lenses from the edger are mounted For close drilling of small work at the bench.
and secured accurately - in one easy step!
Holds drills and taps.
28.234. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
Dimensions: 12”h x 11.5”w x 9”d.
Power Consumption: 12v DC/1.5A.
Optivision® Drill Points Editor™
Optivision®
Reduced Price!
Lens Drilling Vise
Vigor Optical
LEX Drill
Santinelli
A.I.T.’s new Opera Drill, a numerical control
device with an abundance of features for drilling Plastic, Poly and Hi-Index lenses mounted
to rimless frames. The Opera Drill is a standalone automated drill that provides CNC precision without complex software. Perfect for
wholesale lab environments as well as medium-sized labs, the Opera Drill meets the
needs of all labs requiring high levels of quality and productivity at an affordable price.
Opera Drill features an LCD screen to enter,
present and display data, fully automated lens
detection mechanism, 3 dimensional operations - a feature offered exclusively by A.I.T.,
total manual axis control for special or handcrafted jobs, pattern memorization for jobs
with identical or similar characteristics and full
integration with existing A.I.T. patternless systems with the CNC Opera Drill. A.I.T. offers a
comprehensive solution for optical labs with
minimal investment and maximum quality.
Operascan
A.I.T. Industries
Used for precision lens drilling on 3-piece and
rimless lenses. Micrometer, vinyl-coated,
adjustable lens rest, easy mounting with bolt
and nut, sturdy construction. Unit is compatible with any press with a center hole.
Micrometer allows for precision spacing in
1/100mm increments and ensures precision
hole alignment when drilling reverse lens side.
A software solution for rimless drill mount
data, the Optivision® Drill Points Editor™
software program manages the drill point data
that can be sent to drill machines and edgers
capable of drilling. The Drill Points Editor™
supports frames that have up to three holes
and/or notches/slots in both the temple and
nasal sides of the lens with the ability to store,
edit and maintain this data in a simple database:
Santinelli International’s Lex Drill provides
high quality drilling at an economical price.
The unit can easily process the most challenging drilling such as twin holes, rectangular
holes, notches, jewel holes and countersunk
holes automatically. This drilling unit inter- 34.069. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $227.00
faces seamlessly with the Lex 1000 Lens
Power Drill with Accessories
Edger. It processes complex drilling jobs
Vigor Optical
•Ability to match and place the drill data in the automatically.
job tray regardless of lab software brand
Holes are drilled 90 degrees perpendicular to
•Match on frame manufacturer, frame name & the front base curve of the lens automatically.
eye size
Custom angling can be adjusted from 0 to 30
•Three horizontal, vertical, diameter & end degrees. The Lex Drill’s slim design allows it
to easily fit into small spaces. The belt-driven
positions for temple & nasal
drill minimizes noise during operation for a
•Notch Modes support ‘Movement Length’, quiet practice environment.
‘End Hole Position’ or ‘Edge Position’
•Ability to import drill data files
LENS DRILLING MACHINE
Sentilles
The BETTER Drill Bit
PSI
Adapts to all the most popular blocking systems
Automatic calculation of any angles from 0 40 degrees of inclination
Up to 10 operations per lens: drilling, slotting
and blind holes
Automatic recognition of drill and slot coordinates as well as an exact scale representation
of lens shape without the need of measurement
Function for editing and modification of holes
prior to drilling and edging
Memory capacity unlimited
Touchscreen color monitor
Visit www.aitindustries.com for current Price
925 Lens Drill
Optek
34.49202. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $300.00
Reduced Price!
Engravers
Complete stand alone CNC drill plus drill point
recognition system
CNC Drill utilizes a touch probe to measure
base curve and detect the lens edge
1/10hp power drill which closes to zero to
accommodate the smallest drill. Packed with
foot pedal for variable speed control and a
12-piece bur and drill assortment. 110V.
OM-EU Lens Etching Unit
Optical Machinery
A simplified drilling of Rimless and three piece
lens sets. Features two sided lens drilling
simultaneously, producing clean holes without
cracking lens. The Suredrill is capable of
Production proven to have a substantially speedy drilling all lens materials. Whole size
longer life (up to 5 times longer) than other adjustable from 0.8 to 2.8 mm with a direct
bits. Flute geometry is designed specifically read scale.
for lenses to pull swarf from hole producing
cleaner cuts. Fish tail point provides more # 8103-600
Lens Drilling machine efficient drilling and less stress on the bit. 11”Hx6”Wx7.5”D Weight: 9 Lbs. 110v 60Hz
Advanced milling design reduces heat build Contact Sentilles for current pricing.
up, breakage and warranty claims. The 1mm,
Drill Press
2 flute, 1/8” shaft, BETTER Drill Bit is all that is
needed to drill, notch or slot all jobs.
Vigor Optical
LFC-130 The BETTER Drill bit for Briot Prolens
LFC-105 The BETTER Drill Bit for the LFC-380,
E-Lens, OptiDrill, and Pro-Lens
LFC-120 The BETTER Drill Bit for National Optronics
7E & 7EA
Instant logo identification for safety lens,
crown and photochromic. Uses air only
(40psi), no electricity. Quiet, safe, compact
and easy to operate. Least expensive unit
available on the market today. 9lb. ST-EU-A
Abrasive; ST-EU-T Templates (set of 10) made
to order.
Lens Etcher Template
Sentilles
LessStress II Drill
Santinelli
Why spend thousands on a complex CNC drill
when you can easily achieve precise results
for a fraction of the cost? The Optek Lens Drill
is small, lightweight, portable, and very affordable. Its unique design allows you to drill
placed holes at just the right angles, because
A rugged, precise stand which will convert a
flex shaft to a drill press. Throat opening is 2”
and adjustable with a wrench. Adjustable
stroke 0 to 1-1/4”. Adjustable table slides up
and down or can be rotated out of the work
area. Please allow 3-4 weeks for delivery.
13-5/8” x 6-1/2” x 4” with table size of 5-1/2”
The LessStress II Drill is your key to control- square. 9lb.
ling the quality, delivery and profits from the 34.068. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $144.00
increasingly popular and lucrative rimless Reduced Price!
Templates are made of rubber and will fit most
lens etching units. Use for instant logo or letter identification on safety lens. Each set of
templates is made to order and comes in a set
of 10 per letter or logo. 1” diameter. 295-1.
10/12/11 11:04 AM
40
FINISHING TOOLS
Zylonite Files
Files
Vigor Optical
OM-2030 Frame Warmer
Frame Warmers
Deburrer
Optical Machinery
Belrose Air Frame Warmer
Dynamic Labs, Inc.
Belrose
Coarse Cut. Good for rapid cutting on Zylonite
or other plastic material. Will not clog easily.
31.383 8” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $47.00
Uses either salt or glass beads. Controlled by
totally enclosed thermostat from 225° to
450°F. 21-gauge aluminum pan. Pilot light
indicates when unit is on. Can be left on all
day. Maintains constant temperature. Heats
quickly and safely. 110V AC, 200W.
2070 Pillar File
Western Optical
No more scratched frames or lenses!
Removes burrs easily. . . . . . . . . . . . . . . . $19.95
A high quality 600 Watts unit with adjustable
File Accessories
reostat knob for temperature settings of tem-
Vigor Optical
FC-150 File Cleaner. Stiff wire firmly set into a
hardwood handle. Cleans out clogged particles.
“General purpose” file for working on flat perature settings of 50, 65, 80, 95 and 110
degrees. Other two switches are for main On/
plastic frame surfaces. Fine cut, 8” long
#2070 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $25.50 Off and Heat. Includes Frame Holder. . $195.00
2072 Round Rat Tail File
Belrose Frame Warmer
Western Optical
Belrose
33.981. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12.00
Reduced Price!
Use for reaming holes in rimless mounting,
etc. Fine cut, 5-1/2” long.
File Handles
2072 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $14.50
Vigor Optical
2074 Screw Head Slotting File
Western Optical
Never burn your hand again as box is always
Natural finish with metal collets. 5/8” x 4”
(1.5cm x 10.1cm). Skroo-zon handles, cuts Create a screwdriver blade slot in the head of cool to touch. Recessed pan is sealed so that
threads on file tang. Will not slip or turn.
a marred screw. Extra long for extra value. your glass beads will not spill out. Rheastat
37.836/HN-417. . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.00
Fine cut,4-3/8” long.
control up to 400 degress fahrenheit with
File Sets
Vigor Optical
2074 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $37.00
2076 Screw Finishing File
Western Optical
Deluxe Hot Frame Warmer
OptiSource
This Hot Air Frame unit features has digital
control that allows anywhere from 176° to
392° Fahrenheit. This lab strength frame
warmer provides rapid heat up, two separate
variable temperature ranges and a cooling fan
with 6 speeds. The air tunnel design to accomodate all frame sizes.The unit quickly heats
up to eliminate wait time. It is safe for use on
most frames. Simply place the frame in the
Hot Air Frame cup and direct heat where you
need it. The fully packaged weight is 2 pounds
making it light and easy-to-use
32-WARMERDELUXE
indicator light. Has 4 foot grounded power Contact OptiSource for current pricing.
cord and rubber feet.
Digital Hot Frame Warmer
115 volts, 300 watts, 2.5 amps and measures
OptiSource
W-10 5/8” x H-4 1/4” x D-6 1/2”. . . . . . $175.00
Frame Warmer
BPI
Use to smooth the end of screws. Tips come
to a fine point and are angled for easy access
to those hard to reach places. Medium cut,
6-7/8” long.
File Kit:
five most popular files; Zylonite, rat tail, screw
head, narrow pillar, screw finishing. Includes
free file guard. Files come in a plastic platform
box.
2076 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $32.25
2078 Zylonite File
This Hot Air Frame unit features has a digital
temperature setting that allows anywhere
31.419. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $138.00
from 104° to 302° Fahrenheit. We’ve taken our
top-selling adjustable temperature frame
Lens Files and Reamers:
warmer design and outfitted it with a digital
Assortment includes two lens files, two round
Stainless steel warming pan. Power control controller and temperature monitor. The bright
reamers and two tapered reamers enclosed in
LED screen displays the actual temperature
Use to alter the angle of the temple to the end
plastic.
covers a temperature range of 130° to 230°F. inside the housing and the lastest working
15.400/FI-1500. . . . . . . . . . . . . . . . . . . . . . . . . . . $54.00 piece on plastic frames. Coarse cut on wide
Dimensions: 7”h x 11-1/4”w x 8-1/2”d. 15901 temperature upon restart.The fully packaged
Reduced Price!
side while beveled edges are smooth to preweight is 3 pounds, making it light and Easy115V, 215901 220V.
Files
vent damage to eyewear. 7 1/2” long.
to-use.
51202 Replacement beads. 5lb.
Vigor Optical
Western Optical
2078 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $38.00
2087 Screw Finishing Tool
32-WARMERDIGITL
Hot Air Frame Warmer II™
Hot Frame Warmer
BPI
OptiSource
Western Optical
31.114 Half Round FIles, 6” . . . . . . . . . . . . . . . . $47.00
31.146 Flat Hand Files, 6”. . . . . . . . . . . . . . . . . . $24.00
31.182 Knife File, 6” . . . . . . . . . . . . . . . . . . . . . . $39.00
31.334 Screw head files for cleaning and enlarging
screw head slots . . . . . . . . . . . . . . . . . . . . . . . . . $44.00
31.947 Screw Finishing . . . . . . . . . . . . . . . . . . . . $28.50
Grobet Vigor Optical
Vigor Optical
This Hot Air Frame unit features has an adjustable temperature knob that allows anywhere
from 130° to 230° Fahrenheit. The unit
QUICKLY heats up to eliminate wait time. It is
The new Hot Air Frame Warmer II™ features a safe for use on most frames. Simply place the
temperature control for precise operation. The frame in the Hot Air Frame cup and direct heat
where you need it. The fully packaged weight
attractive design will fit into any lab. 115V.
is 3 pounds, making it light and EASY-to-use.
A few twists of the cupped cap rounds off the
ends of cut screws. Made of hardened carbide steel permanently mounted in a nickle
Lens files perfect for work on screw holes, plated steel handle. Maximum screw diameter
rimless, groove or slot work.
15902
1.6mm.
31.415
4 1/2” Slim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.00
2087 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.00
32-Warmerstndrd
10/12/11 11:04 AM
FINISHING TOOLS
Frame Warmers
41
PSI Hot Air Frame Warmer
Frame Warmer–SureHeat
Hot Box Frame Warmer
PSI
Sentilles
Western Optical
Salt Pan Frame Warmer
OptiSource
PSI’s Hot Air Frame Warmer is a compact and
quiet running unit. Provides instant heat without warming up. It features a variable temperature adjustment knob to allow heat control to prevent frame damage. Air can be
adjusted to hot or cold. 100-120V, 60Hz (220V,
This Hot Box Frame unit features has an 50Hz available). Machine comes with a oneadjustable temperature knob that allows any- year warranty. 6” H x 5.5” W x 9” L. 4lbs.
#NH-320
where from 130° to 400° Fahrenheit. The unit Contact PSI for current pricing.
QUICKLY heats up to eliminate wait time. It is
Digital Hot Air Frame Warmer
safe for use on most frames. Simply place the
Santinelli
frame in the Hot Box Frame and direct heat
where you need it.
Use with glass beads or salt. Heavy-duty
constructed, yet economical. Teflon-coated,
non-stick warming pan with on/off switch and
variable thermostat for accurate control of
heat, as to not overheat frames. 120V, 60Hz,
0.8A. 5.5”h x 8”w x 12”d.
219-00 SureHeat Frame Warmer Only
219-07 SureHeat Frame Warmer with Glass Beads
included
Hot Air Warmers
Vigor Optical
99-W2500
Auto-Frame Heater
OWC
The industry favorite for over 20 years,
Western Optical is proud to continue to present the classic Hot Box, its flawless performance, proprietary design and construction
has made it the most popular frame warmer in
America. New injection molded housing for a
smaller footprint on your counter. HOT:
Maximum temperature 400°F. BIG: Non-stick
inner pan measures 9”w x 2-3/4”h x 5”d.
CLEAN: Recessed pan is sealed in place so
that glass beads or salt will not spill on countertop. LONG LIFE: Electrical components are
shielded from contamination by bead or salt
spills. PLUS: Adjustable temperature control,
indicator light, 6’ grounded power cord and
rubber feet. DIMENSIONS: 10-5/8”w x 4-1/4”h
x 6-1/2”d.
2500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $195.00
2500EXP 220 volts . . . . . . . . . . . . . . . . . . . . . . $200.00
PrimAir Frame Warmer
Western Optical
Our Digital Hot Air Frame Warmer electronically displays the temperature on the LCD of
the unit. The Frame Warmer is fitted with a
temperature control system which allows you
to monitor and control the actual temperature.
The last temperature from the previous job is
Automatically loaded by rotary system; opera- recorded and then displayed when the
tor can assemble up to 80 jobs per hour. machine is restarted. The unit has a heat colInstantaneously responding dial-controlled lection device that works with all frame types.
heat regulator and time relay accommodate
Frame Warmer, Glass Beadle
different-gauge frames. Operator handles
Santinelli
metal trims comfortably without burning fingers. No glass or salt beads to pit frame, get
in eyewires, cause loose lenses or hinges.
Completed frames retain original factory finish
and lustre. Ornamental stones kept intact.
077.
Two styles: 44.071 small compact economy
model and 44.073 deluxe with rheostat and
concentration device for nasal and spotheating. Both models rugged construction
and 90-day warranty. 44.073 model 11-1/2” x
5” x 4”, 44.071 model 10-1/2” x 5-1/2”. Both
100 watts, 110V with 220V available.
44.073 Deluxe . . . . . . . . . . . . . . . . . . . . . . . . . . $500.00
Reduced Price!
New Digital Air Warmer 44.070
Vigor Optical
Maximum Temperature: 350° F
Air Speed: Variable
Glass Bead Frame Warmer
Voltage 115 volts
OWC
Watts: 1000
Fast adjustment of zyl frames and quick heating without hot housing. Adjustable temperature control; indicator light tells you when unit
is at the proper temperature. Fully insulated
and rubber feet for non-marring protection.
Complete with glass beads.
FRAME WARMER - HOT AIR
Sentilles
Glass bead frame warmer. Thermostatically
controlled temperature settings. Fitted lid to
maintain uniform temperature when not in
use. 5-1/2”h x 9-1/2”l x 5”d. 7lbs. 110V.
Amps: 9 Specs: 8” W x 8-1/4” H x 5-3/4” D
New, upscale hot air warmer with digital dis- #2400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $385.00
play and multiple heat settings.
PrimeAir Frame Warmers
The electronic system is highly energy efficient and controls temperature internally. A
digital readout shows current working temperature and when unit is restarted the temperature returns to latest setting.
Heat is controlled with simple up and down
buttons for extreme control.
110V and 800w. 9.25” x 5” x 9.75”. . . . $250.00
Zyl Frame Warmer
Heating Pan
Vigor Optical
OWC
Sturdy compact professional unit, for use on
dispensing table or in the lab. Cup holder
provides support for frame or temple being
adjusted -allows a directed air flow exactly
where needed. Select 1 0f 2 heat settings for
adjustment to be made then switch to cool air This 12” x 6” x 4-1/2” stainless steel warmer
features a Teflon®-coated pan to prevent
to set adjustment made.
sticking. Novel features include a wooden bar
Two models available.
to safely tap off beads and insulated sides to
Use either salt or glass beads. Enclosed ther- # 8320 Frame Warmer Single Heat Seating
protect from burning. It operates from 200omstat from 225 to 450 degrees. Fully anod350°F and is controlled by a rheostat. The unit
ized 21 gauge aluminum pan maintains con- # 8322 Frame Warmer Dual Heat Seating
is made in the USA and is UL approved. Also
stant temperature.
6”H x 5.5”W x 9”L - Wt. 5 Lbs - 110V 60 Hz
available in 220V.
Western Optical
Supplied with cup, intensifier and lid. Available
in 110V & 220V.
Compact and quiet unit delivers a blast of
heated air to your frame moments after activating the solid-state electronics. Full temperature and air speed range allows you to
use the proper heat setting for trouble free
adjustments. Includes hot air contrator.
44.042. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $357.00
Compact and quiet unit delivers a blast of
heated air to your frame moments after activating the solid-state electronics. Full temperature and air speed range allows you to
use the proper heat setting for trouble free
adjustments. Includes hot air concentrator for
pot heating on frames. 3-year Warranty. Made
in Italy.
Specifications:
Maximum temperature: 350o F
Air speed: Variable
Voltage: 115 volt Watts: 1000 Amps: 9
Dimensions: 8”w x 8-1/2”h x 5-3/4”d
Variable air speed
2400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $385.00
2400Export(220) . . . . . . . . . . . . . . . . . . . . . . . . $399.00
2450 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $345.00
10/12/11 11:04 AM
42
FINISHING TOOLS
Large Glass Beads
Glass Beads
OptiSource
Glass Beads
box to the proper level.
2600 Regular . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
2650 Extra large 2.0 - 2.3mm . . . . . . . . . . . . . . . $50.00
Grinding/Polishing Accessories
Belrose
Polishing Compounds
Dynamic Labs, Inc.
17.436 4” Dia., 3/4” Thickness . . . . . . . . . . . . . . . $8.00
17.437 4” Dia., 1” Thickness. . . . . . . . . . . . . . . . $10.00
Flannel Buff
Cotton Flannel Fine quality, soft cotton flannel
produces bright polish when used with rouge.
Well stitched with hardened shellac centers.
17.203
17.205
17.206
17.207
3”
4”
5”
6”
Dia.,
Dia.,
Dia.,
Dia.,
30-Ply,
30-Ply,
30-Ply,
30-Ply,
Ship
Ship
Ship
Ship
wt.
wt.
wt.
wt.
2oz.
3oz.
4oz.
6oz.
..........
..........
..........
..........
$3.50
$4.50
$5.50
$6.50
Buff & Polish Kit/Large Motors
Vigor Optical
Use these Glass Beads in any Salt Pan Frame
Warmer to transmit heat. Never lodge in the
lens groove of a frame. These large Glass
Beads are 2.5 mm in size.
Superb, high-quality, completely spherical 99-OSLGB
glass beads that provide uniform heat trans- Contact OptiSource for current pricing.
fer. Large size prevents beads from falling into
Small Glass Beads
grooves of eyewires. 5lb large beads or 7lb
OptiSource
standard beads.
Large Beads . . . . . . . . . . . . . . . . . . . . . . . . . . . . $45.00
Standard Beads. . . . . . . . . . . . . . . . . . . . . . . . . . $18.00
Glass Beads
DAC Vision
Comes in a convenient, economical, peel
back cardboard tube for ease of use and
cleanliness. White Rouge — for final gloss
polish on polycarbonate and high index, and
can be used as a one step polish on CR-39.
Green Rouge — great for 1st step on polycarbonate and high index. Blue Rouge — great
for 1st step on polycarbonate or high index,
and can be used on metals as well. Red
Rouge — can be used on glass and precious
metals.
ST-373 Large–These specially formulated
glass beads average 3mm in diameter and are
highly uniform in size. They exceed industry
standards for density, abrasive resistance and
Buffing Wheels
impact strength. Completely spherical, there
Use these Glass Beads in any Salt Pan Frame
Santinelli
are no slivers, broken or fused pieces, no Warmer to transmit heat. Never lodge in the
surface cracks and no contamination. 5lb/jar. lens groove of a frame. These small Glass
Features fine muslin buff for gloss finishes
ST-375 Hi-Purity–Glass beads are ideal for use Beads are 250 microns in size.
with a rouge stick. Exclusive cotton string
99-OSSGB
in the bench room. Glass beads have a longer Contact OptiSource for current pricing.
design. Replacement wheel for Santinelli buffer/polishers.
life and maintain a more even temperature
Glass Beads
than any other material. Will not stain or mar
Sentilles
frames. Eliminate possibility of dermatitis. 5lb
Edge Polish Polycarbonate Liquid
pkg. or jar.
47.025 Complete Kit–Ship wt. 2lb. . . . . . . . . . . . $50.00
47.312 1/4lb. fabulustre
BF-1061 3-1/2” Yarn Buff
BF-754 4” Muslin Buff
BF-847 4” Solid Felt Buff
CE-415 Crystal Kleer Frame Renewer
PS-304 White Rouge
PS-347 Zam Polishing Compound
PS-350 Wonder Bar Polishing Compound
Reduced Price!
Buff & Polish Kit/Small Motors
Vigor Optical
Sentilles
47.024 Complete Kit–Ship wt. 1lb 8oz . . . . . . . . $28.00
BF-753 3” Muslin Buff
BF-783 3” Cotton Flannel Buff
CE-415 Crystal Kleer Frame Renewer
PS-304 White Rouge
PS-347 Zam Polishing Compound
Reduced Price!
16-Hour Crown
OptiSource
Grobet-Vigor Polishing Compounds
Vigor Optical
16-Hour White/Crown/Fixed-Tint Salt
27-CROWN16
16-Hour Photochromic
OptiSource
Our highest quality, spherical glass beads
average 3mm in diameter. Highly uniform
particle size to provide heat transfer. We offer
two sizes: many prefer the regular bead, while
others prefer the large beads that will not
lodge in groove of eye-wires.
1-70021 Glass Beads–Regular (5lb. jar)
1-70169 Glass Beads–Large 3mm (5lb. jar)
Use this liquid concentrate to polish dull or
frosted polycarbonate lens edges to a sparkle
in seconds. Wipe on with a swab applicator;
dries in seconds to a high gloss. Will not peel.
16 oz. bottle. Visa and Mastercard Accepted.
PART #1-2102-16
Glass Beads for Salt Pans
Assorted Buffs from Vigor
Vigor Optical
Vigor Optical
Blue Rouge
Handy for first step polishing on polycarbonate edges.
47.322 Ship wt. 5oz. . . . . . . . . . . . . . . . . . . . . . . . $6.00
Crystal Kleer
Zyl polishing compound useful for final polishing on high index and plastics.
47.310. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.00
Green Rouge
16-Hour Photochromic Salt
27-PHOTO16
2-Hour Photochromic
OptiSource
Glass beads available in two sizes: Standard
and Large. 5lb jars.
Felt Buffs
44.060 Standard . . . . . . . . . . . . . . . . . . . . . . . . . $22.00
44.062 Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . $72.00
Glass Beads
Western Optical
Fine Soft Felt 6-ply with light touch and plastic
center. Use with White rouge to remove hairline scratches from lenses before coating.
Ideal for high gloss on CR-39 and polycarbonates. Ship wt. 3oz.
17.130 3-1/2” Dia., 1/2” Thickness. . . . . . . . . . . $18.00
Yarn Buff Light touch for final polish. Produces
extra-high gloss on lens edges, especially
polycarbonate, high-index, and CR-39.
Strands of cotton yarn are woven into a solid
plastic center. Will not fray or burn lens edges.
Ship wt. 2oz.
17.213 3-1/2” Dia., 3/4” Thickness. . . . . . . . . . . $14.00
2-Hour Fast Photochromic Salt
27-PHOTO2
Fine Soft Felt 6-ply with light touch and plastic
center. Use with White rouge to remove hairline scratches from lenses before coating.
Ideal for high gloss on CR-39 and polycarbonThe clean way to evenly transfer heat of frame ates. Ship wt. 3oz.
surface. Each five pound container fills the hot 17.431 3” Dia., 1” Thickness. . . . . . . . . . . . . . . . $12.50
Useful with solid felt buff for CR-39 and polycarbonate edge polishing.
47.321 Ship wt. 7oz. . . . . . . . . . . . . . . . . . . . . . . . $6.00
Red Rouge
Water soluble, useful for edge polishing on
glass and metals.
47.324 Ship wt. 6oz. . . . . . . . . . . . . . . . . . . . . . . . $6.00
White Rouge
Useful for plastic lens edge polishing and for
final high gloss on polycarbonate edges.
47.326. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.00
White Rouge Useful for plastic lens edge polishing and for final high gloss on polycarbonate edges.
47.470 (not peel-away rolls) Ship wt. 6oz. . . . . . . $4.50
Wonder Bar
Wonder Bar Final touch for finishing metals
and plastics.
47.313 Ship wt. 1lb.. . . . . . . . . . . . . . . . . . . . . . . $10.00
10/12/11 11:04 AM
FINISHING TOOLS
Yellow Rouge
Useful for plastic lens edge polishing and for
final high gloss on polycarbonate edges.
47.327 Ship wt. 5oz. . . . . . . . . . . . . . . . . . . . . . . . $6.00
Zam Green
43
GRINDER / BUFFER
Polisher/Dust Collector
Sentilles
Vigor Optical
Grinding/Polishing Motors
Plastic Lens Buffer Kit
PSI
Useful for first step polishing on polycarbonate edges.
47.502 Ship wt. 4oz. . . . . . . . . . . . . . . . . . . . . . . . $6.00
47.503 Economy size-Ship wt. 1lb. . . . . . . . . . . $10.00
Silky Fine Yarn Buff 17.212
Vigor Optical
# 8033 MINI MOTOR TOOL GRINDER / Polisher, grinder with dust collector. Sloping
BUFFER WITH FLEX SHAFT
Plexiglass top for greater visibility. 1/3hp
Industrial motor tool perfect for grinding, cut- motor gets 3450 rpm. Two bulbs for light.
ting buffing and polishing lens edge, plastic Separate suction motor in “squirrel” cage.
and metal frames also small parts. Use the 5/8” (1.59cm) shaft with two tapered spindles.
31’’ flex shaft for precision work and hard Replaceable fiberglass filter 20” x 10” x 1”
reach surfaces includes flex shaft wrenches (50.8cm x 25.4cm x 2.54cm). ETL
3/4x3” grind stone, 3x3/4’’ fiber buffer wheel Approved.110V AC, 6.6A. 20-12”h x 1/4”w x
and 1/8’’ mounted Cone bit. Variable speed 17-1/4”d (57.44cm x 43.8cm x 30.5cm).
47.2026. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $945.00
control.
The Buffer Kit has been used in the laboratory
for many years to remove hairline scratches
from CR-39 lenses. Includes: the buffer unit,
10 sponges, an 8oz. jar of P.S.I Lite
Concentrate, an applicator brush and an 8oz.
bottle of Doubleday lens cleaner. The unit is
•Motor: 110V, 60 Hz , 120 watts, .5A
stainless steel and operates on 110V, 60Hz.
SILKY FINE YARN BUFF • 3.5” diameter & 370K
5/8” thick • Plastic core with tapered center Contact PSI for current pricing.
3.5”DIA x 5/8” thick .Made in Germany $16.00
Solid Felt Flat Polishing Buff
Vigor Optical
# 8145 LENS POLISHER
Sentilles
Single Spindle Edge Polisher
Vigor Optical
•Sealed Ball Bearings
•_No load speed control: 0-10,000 RPM
•_Wheel size: 3”x3/4’’ stone & 3”x3/4 Fiber
wheel
•Arbor: 10mm (.393)
LENS POLISHER - DUAL PAD
Sentilles
Used for lens edge polishing.1/3HP, 3450
RPM motor with safety shield and 1/2” diameter spindle. 10”h x 16”w x 17”d. 39lbs.
110VAC.
47.1050/0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $684.00
# 8145 LENS POLISHER
Compressed wool felt polishing pad.
Designed for flat horizontal edge polishing ANGLED UNIT PROVIDES OPERATOR
machines. Buff is 6” diameter and 1/4” thick COMFORT.
with a 3/4” center mounting hole. 2 oz.
17.440 3/4 hole . . . . . . . . . . . . . . . . . . . . . . . . . . $10.00 Flat dual pads form a 90 degree angle in a
17.441 7/8 hole . . . . . . . . . . . . . . . . . . . . . . . . . . $10.00 circular rotation allowing operator full control
to polish Rimless or Bevel edge lenses to a
Wool Buff 17.210
brilliant luster. Supplied with SOS ALL LENS
Vigor Optical
dry polish bar for all lens materials. Felt pads
are reversible for longer use.
Hammers
Hammers & Mallets
Polisher has dual flat polishing pads, 0ne 2.5”
Vigor Optical
over one 6” Flat Felt Pad to forms a 90 degree
angle in a circular rotation to give operator full
control to polish Rimless or Bevel lenses to a
brilliant luster. Supplied with SOS ALL LENS
dry polish bar for all lens materials. Eliminates
110V 60 Hz 2.5A Size: 8.75” x 9.75” H.
the use of messy liquid lens polish. Felt pads
8145
Lens Polisher - with 2.5” & 6” Flat are reversible for longer use.
37.0362 Riveting Hammer. . . . . . . . . . . . . . . . . . . $7.00
Felt Polish Pad and Polish Bar
Specifications:
37.244 Swiss Style Hammer . . . . . . . . . . . . . . . . $10.00
37.536 Brass/Nylon Hammer . . . . . . . . . . . . . . . $12.00
1-1112
Polish Bar - ALL LENSTM Polishes 110V 60 Hz 2.5A Size: 8.75” x 9.75” H. Wt: 16
Lbs
2102 Riveting Hammer
CR39,HI Index, Poly, Trivex, even Glass
Western Optical
1-1001 Flat Felt 6” x 1/4” Polish Pad - used Order # 8145
for flat Lens and V Bevels
Lens Polisher
High quality German wool buff 3.25” diameter 1-0225 Flat Felt 2” x 1/4” Polish Pad - used 1-1001
Flat Felt Pad 6” Extra Hard
& 1” thick Plastic core with tapered center . .
to form 90 degree angle for V Bevels.
8145-0600
$22.00
4097 Polishing Pad
BUFFER /POLISHER
Western Optical
Sentilles
Diamond Disc 6” 600 Grit - Fine
8145-1200
Diamond Disc 6” 1200 Grit - Polish
84-10
Foot control for variable speed
Accessories supplied with machine:
1-1112
ALL LENSTM Polish bar
1-0225
Flat Felt Pad 1/4” x 2”
1-1001
Optional Accessories available:
1-0238
Made of highly durable compressed felt. 6” Heavy duty 6” Buffer, with extra long balldiameter _” thick with _” center hole.
bearing supported precision machined shafts.
4097 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $14.00
Comes with two buffing wheels and one ALL4106 Crystal Kleer Rouge
Lens Polish Bar. Has four 3/8” mounting holes
for mounting to bench
Western Optical
An optician’s favorite classically constructed
with a hardwood handle and forged steel
head. Specs: 9-3/4” Long and 3” Head.
2102 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12.00
Lab Cleaning Supplies
BPI
Dust Collector with Baldour Polishing
Motor
Vigor Optical
• Motor _ Hp 120 VAC 3600 RPM 4A
• Extra long ball-bearing supported precision
machined shafts
• Cast iron base for reduced vibration
• Easy access on/off switch
• CSA listed
Industry classic for polishing the edge of plas- Part#8020
tic and hi-index lenses. Specs: 5”w x 1”h x 1”d Shipping weight: 25 lbs
4106 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.25
47.114 motor only . . . . . . . . . . . . . . . . . . . . . . . $835.00
47.142. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1682.00
Reduced Price!
Quickly remove the marks from a progressive
lens! The fiber tip incorporates a valve that
# 71027
10/12/11 11:04 AM
44
FINISHING TOOLS
PSI Wipes
Lab Cleaning Supplies
PSI
Lens Dryers
Micro-Processors
Sirocco Lens Dryer
Micro-Pal Identifier
Phantom
Coburn
OptiSource
Can also be used as a safe solvent on many
subtrates such as polycarbonate, acrylic,
metal, ceramic, and glass, to remove stains,
marker ink, and paint without damaging the
surface.
Compact, heavy-duty double-capacity unit,
putting out twin jets of air, as warm and dry as
the Sirocco wind for which it is named. Foot
control frees both hands permitting the operator to dry two lenses simultaneously without
smears, streaks or water marks. Dyed plastic
PSI offers a variety of lens cleaning cloths.
lenses are dried instantly with no runs or
PSI’s own lens wipes are comparable to name
The battery operated, bright LED light makes
streaks. Air drying eliminates possibility of
it simple to read reference points, add-power,
brand wipes at a fraction of the cost. Available
scratching lens with towel.
manufacturer, lens model and material markin two sizes, PSI Small, 4-1/2” x 8-1/3” 1-ply
25400-00
ings. Multiple uses include identifying
wipes (Item #6415) and PSI Large, 15” x 17” Contact Coburn for current pricing.
patient’s current lens, maring lenses or finding
3-ply wipes (Item #6425). PSI also carries
test points, regardless of the age of the lens,
OM-84 Lens Dryer
Kimwipes, Item #34155, Kaydrys, Item #34721
scratches, tint or coatings. Can also be used
and Mini Kaydrys, Item #34743. All are availOptical Machinery
during final inspection to clearly see blemishes or imperfections. Uses 4 “AAA” batteries.
able by the box or case.
Automatic shut-off feature preserves battery
life. Optional 7V, 0.5A power pack available
separately.
Quick Clear Hand Cleaner
84-MICROPAL
PSI
Plier Accessories
MSDS.
quart sizes.
Air drying leaves no scratches or abrasions.
Dries both sides of 2 lenses at one time.
Housing is made from non-conductive material.
Lens Dryer
3M High Performance White Lens
Cloths
PSI
OWC
Get rid of stubborn dye stains with Quick
Clear Hand Cleaner from PSI. Easily remove
stains by applying to skin and rubbing until
the stain disappears. Follow up with soap and
water. It is hypoallergenic and safe for sensitive skin.
Make replacing flex hinge screws easier with
Stopflex. Both experience and inexperience
opticians will find Stopflex as a fast, simple,
and reliable method for replacing flex hinge
screws. The Stopflex, with its durable steel
constructions and nickel plating for a long life,
will allow users to safely remove and insert
flex hinge screws without damaging frames.
210 8 oz. bottle
Quick Clear Tint Pan Cleaner
PSI
Warm air blower to dry a pair of lenses at a
time. Pedal operated.
Designed with a unique combination of microfibers and knit construction to provide excellent dust, oil and water pickup with minimal
lint. May be used dry or damp with or without
cleaning chemicals for a variety of surfaces,
including plastic and glass lenses. Delivers
streak-free, scratch free cleaning. Cloths are
washable and reusable.
23649-1
Lens Cleaner
PSI
Vigor Optical
AIR DRYER - DUAL LENS
Sentilles
Available in four colors: Red, Blue, Yellow and
Green. Protects hands and provides easy
Pliers identification. 46.900 Red, 46.901
Green, 46.903 Yellow, 46.905 Light Blue. $5.00
Why scrub when you can just wipe your tint
pans clean. PSI’s Quick Clear Tint Pan Cleaner
is a no-scrub formula which emulsifies old dye
from the cracks and pores of the tint pan,
cleaning them with little effort. It leaves a
protective coating making pans even easier to
clean the next time.
PSI
pr.
Reduced Price!
Pliers
Stopflex
Self contained low pressure lens dryer with
heavy duty construction of non conductive
material to provides a rust free, shock free
body. Flat top allows for lens tray rest. Dual
blower tubes allows 2 lens drying at one time.
Units filtered air process eliminates grit blowing on lens thus eliminating pitting or scratches. Operated by provided foot control. 110V
60 Hz
#84-09 Cleaner Pad -Air Intake
#84-08 Protector- tube end
Non-woven, reusable disposable cloths offer
low lint cleaning. Used for lens cleaning and #84-10 Foot Control
inspection. Makes a great shop rag.
#84-06 Vacuum Motor SA
SCLC-20-12 12” x 12” Blue
SCLC-20-14 14” x 18” White
A.I.T. Industries
#84-04 Lens Dryer- Dual Lens Unit
Four Color Cushion Pliers Grips
8 A, 110 volt, 60 Hz Specs: 11 1/4”L x 7 7/8”W
x 7 3/4”H
Simply Clean Disposable Lens Cloths
Weight: 11 lbs
190 8 oz. bottle
dropper top and 1, 2, 4 and 8 oz. pump tops
as well as quart and gallon refills. Private
labeling is available.
Stopflex
A.I.T. Industries
10/12/11 11:04 AM
FINISHING TOOLS
QUICKLY and EASILY. The All-In-One Hand
Deblocking Plier will not damage the lenses.
Pliers
34-OSTHFDEBLL
Pliers
Belrose
45
Bracing & Holding Pliers
Deluxe Spek-Tek European Pad
Vigor Optical
Adjusting Pliers
Vigor Optical
Small Hand Deblocking Plier
OptiSource
46.5764 Parallel Nylon protected jaws. . . . . . . . $20.00
Complete assortment of finishing tools and
supplies for all your optical needs.
Contact Belrose for current pricing.
Thin Bushing Cutters
Dynamic Labs, Inc.
46.5775 10mm Nylon Jaw and 2mm flat metal jaw. . . .
4.7mm-wide jaws with leaf spring hinge. The
$20.00
inner curved jaw is padded for extra protec-
Use the Small All-In-One Hand Deblocking Reduced Price!
Plier to remove edging blocks from finished
Bracing Pliers
lenses QUICKLY and EASILY. The Small All-InVigor Optical
One Hand Deblocking Plier will not damage
the lenses.
tion. Especially useful for soft silicone pads.
Shipping weight 6oz.
46.057. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
Economy Stainless Side Cutter
Vigor Optical
34-OSTHFDEBLS
LZFII
Precision Tool
Dynamic Labs has designed this high quality
bushing cutter to get into the tighter places
that standard cutters can’t.
Bracing and end piece adjusting pliers has
11mm nylon flat jaw and 6mm “V” shaped
metal jaw. Nickel plated.
Vitale Deblocking Pliers
46.736. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
Rounded jaws diagonal cutter; Standard bevel
Dynamic Labs, Inc.
Bridge Sizing Pliers
cut ; Rockwell hardness 61-62; Hardened and
Vigor Optical
treated handles; Grips will not spin or rotate;
Will not break with proper use on stainless up
Virtually eliminates crazing due to mis-habto 1.5mm diameter; 1year warranty
dling during deblocking, this pneumatic
46.9160. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $60.00
device is the finish room answer or costly AR
lens breakage. Both left and right lenses are
Ergo Chain/Snipe Nose Pliers
carefully held while the edging blocks is
Vigor Optical
rotated, not breaking the adhesive bond.
Made for heavy duty, continues use on all
types of lenses. Increase production, elimiUse for ergonomic deblocking with soft cushioning for your hands. Angled head to reduce nates craze lenses and hand-wrist injuries.
wrist injuries and easy opening spring to eas- Contact Precision Tool for current pricing.
Large jaw accommodates heavy frames to
ily release the blocks. Specially designed to
Ergo Pad Pliers
enlarge bridge.
reduce damage to coatings on thin center
46.758M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $45.00
lenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.95
Vigor Optical
ST-5060 Lens Aligner Pliers
Cold Bending Pliers without Spring
Optical Machinery
Vigor Optical
With ergonomically shaped extended handles
and cushion comfort grips , this full size chain
nose with 8mm long tapering jaws is a good
choice for general bracing & adjusting needs.
. Stainless steel with dual spring.. 6 3/4” total
length
46.5029E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $25.00
Long jaw European style slim jaw nose pad
adjuster • Ergo handle with cushioned grip •
Ergo Compression Closing Pliers
Manufactured of a superior alloy that is High quality stainless steel• Length: 6” $25.00
Vigor Optical
designed to resist breaking. Its deep throat
Multiple use Pliers for adjusting zyl and metal
Angling End Piece Pliers
allows the pliers to be used on all sizes. The
frames without heat.
pads have a special surface that gives it
46.045. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $28.00
Vigor Optical
maximum gripping power with minimum
effect. All parts are easy to replace.
Curved Tip Chain Nose Pliers
Vigor Optical
Large Hand Deblocking Plier
OptiSource
Unique ergonomic handle design offers
secure grip for compression and bracing.closure bushings nestle securely in horizontal
46.5040G Finger Piece Pliers . . . . . . . . . . . . . . . $20.00
grooves. 8mm nylon jaw protects lenses dur-
46.5041G Two hollow recesses fit over screw for
ing closure. Use as a bracer for frame adjust-
secure adjustment. . . . . . . . . . . . . . . . . . . . . . . . $20.00
Use the All-In-One Hand Deblocking Plier to 46.5265 Wide Jaw Angler . . . . . . . . . . . . . . . . . . $20.00
remove edging blocks from finished lenses 46.768 Combination post and end piece. . . . . . $40.00
46.329 1/2”l Good Quality. . . . . . . . . . . . . . . . . . $38.00
46.7833 Curved Tip . . . . . . . . . . . . . . . . . . . . . . . $20.00
ment. Cushioned handles.
46.702E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $25.00
10/12/11 11:04 AM
46
FINISHING TOOLS
Ergo Wide Jaw Angling Pliers
Gripping Pliers
46.5699E
Vigor Optical
Pliers
Long Jaw European Nose Pad
Adjuster_
Vigor Optical
Vigor Optical
Ergo Endpiece Adjuster
Vigor Optical
Features nylon protective jaws.
Wide jaw opening allows you easy access to
hinge for pantoscopic angling. Hollow jaw
ends protect screwhead. Special shaped long
Ergo shapped handles with cushioned grips handles allow for superior leverage and control. Stainless steel with cushion grip handles.
on the nylon jaw flat and tapered round endLength 1/2˝.
piece adjusting pliers. The pliers features a
46.5710. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
Heavy-Duty Punch Pliers
Vigor Optical
Long jaw european style slim jaw nose pad
adjuster, High quality stainless steel, Non slip
vinyl coated handle covers, Length: 6”.
46.1605. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
Long Nose Chain Pliers 46.5029
Vigor Optical
10mm nylon protected flat jaw and a round
tapering jaw. Cushioned grips add comfort 46.5699E . . . . . . . . . . . . . . . . . . . . . . . . . $25.00
and reduces hand fatigue. Entended handles.
Ergonomic Basic Dispensing Kit
89.550E
Total length 6.75”
46.5764E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $25.00
Vigor Optical
Ergo Flat Jaw Bracing Pliers
Designed for punching-out screws and rivets.
Parallel jaw pushes out screws without marring frames. Large nylon die allows removal of
large shields and slips into the throat of pliers
Long 7mm jaws taper to 1mm to reach into
when not needed. Specs: 7-1/4”, 13oz.
small places. Jaw length 35mm. Conventional
46.858. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $109.00
plastic coated handle. Total length 5 3/4”. . .
Reduced Price!
Vigor Optical
Lens Axis Pliers
Vigor Optical
$20.00
Midget Axis Plier
Vigor Optical
All new ergonomic pliers combination packed
in a handy leatherette case. Kit includes 7
dispensing pliers. 1 each:
Ergonomic shape, longer handles with cush- 46.072E Nosepad adjuster
ioned comfort grips on a double nylon flat jaw 46.5029E
bracing pliers. Nylon jaws provide secure
46.5699E
bracing with no frame marring. Can be used
46.5764E
on any frame material. Total length 6.75”.
46.5767E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $25.00 46.5767E
Ergo Midget Lens Aligner 46.809E
Vigor Optical
Long jaw chain /snipe nose
Angling/panto adjuster,
Popular endpiece angler,
Wide jaw nylon flat bracer,
46.702E Compression bushing bracer
46.809E Midget lens aligner.
89.550E Complete set. . . . . . . . . . . . . $140.00
Eyewire & Bridge Shaping Pliers
46.767/PL3691 Economy . . . . . . . . . . . . . . . . . . $20.00
46.808/PL91 Pakistan Imported . . . . . . . . . . . . . $22.00
Reduced Price!
Extra small size axis plier. Ideal for half eyes
and small eyesizes.
Lens Sizing Plier
Nose Pad Removal Pliers
Vigor Optical
Vigor Optical
46.809. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $26.00 ea.
Vigor Optical
Ergonomic engineered lens aligning pliers
with oval secure gripping jaws 19mm x 12mm
and off set elongated ergo handles for
Has small pointed jaws to insert in eyewire for To easily push click/push base pads through
the guard arm for nose pad removal click/
sizing.
tion for small half eyes, children as well as
46.5776 Spek Tek Eyewire Sizing Plier . . . . . . . $20.00 push base nose pads. Reducing the chance
Unique shaper for bridge, works well on
misalignment of guard arms. 5oz. 6” polished
conventional eye sizes. Stainless steel. Ergo smaller frames. Excellent bridge holding pliLimited Edition Gold Pliers Set
stainless steel; One 6mm Metal Slotted Jaw;
handle with cushioned grip. 61/2˝ . . . . . $25.00 ers. 18mm concave nylon jaw and 7mm
Vigor Optical
One Thin 2.8mm Curved Metal Jaw.
slightly convex nylon jaw. Polished Nickel
46.050. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
Ergo Nose Pad Adjuster
5-1/4” pliers.
increased leverage and torque. Quality solu-
Vigor Optical
Notched Eyewire Former
46.5770. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
Vigor Optical
Forming Pliers
Vigor Optical
SPECIAL LIMITED ADDITION
PRODUCTION 100 SETS. 5 stainless steel
adjusting pliers with gold plating. Super gift
for valued employees, customers, or recent
Nose pad adjusting pliers with cushioned ergo
The full size ( 5-1/2”) stainless pliers features
graduates. Pliers are presented in a Black
dual nylon jaws. The concave curved 14mm
shaped handles. 6.75” length. The notched
Zipper Case.
nylon jaw provides a 2.5mm horizontal slot.
Curved jaws. Useful for eyewire shaping and
jaw is 2mm deep and the scoop jaw is 5.9mm.
•Nylon Jaw Flat/Round •Panto Angling Pliers The combination of the concave curve and the
for adjusting S curve on temple ends.
Larger than the standard European adjuster.
46.769. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $26.00 •Nylon Jaw Flat/Flat •Pad Ajuster •Chain slot easily accesses the eyewire corners on
Nose . . . . . . . . . . . . . . . . . . . . . . . . . . . . $155.00 small frames. The slot provides additional
46.072E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $25.00 Reduced Price!
10/12/11 11:04 AM
FINISHING TOOLS
47
control not available on standard eyewire
Screw Rivet and Burnishing Pliers
Slimline Temple Bracing Pliers
Stainless Steel Screw Cutter
adjusters. The angle of the curve is controlled
Vigor Optical
Vigor Optical
Vigor Optical
with a small 7.5mm slightly rounded nylon jaw.
Besides eyewire forming, the notched, curved
jaw can provide bridge reduction control for
some frames. 5-1/2” long. 4oz.
46.5772. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
Pad Adjusters
Vigor Optical
German quality. Has removable nylon jaw for
close fit. Useful for riveting screws to prevent
New from France the slimline bracer provides
back-out.
46.854. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $26.00 superior grip with its 7mm very thin flat nylon
Reduced Price!
jaw and a 7mm metal jaw. The nylon jaw protects the outer frame surface. The new bracer
Self-Locking Screw Holding pliers
was specifically designed for bracing frames
Vigor Optical
with top bars and as an alternate to the sometimes clumsy, thick jaw parallel bracers. 6”
long. 5oz.
Will withstand the hardest optical screw. Our
best cutter.
46.211. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.00
Reduced Price!
Tri Prong Snipe Nose Pliers
Vigor Optical
46.705. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39.50
SlimlineDouble Flat Nylon Jaw Pliers
44.049
46.046/PL 5160 B & L style flat pad arm adjuster. . . . .
Vigor Optical
$20.00
Round pliers Nylon Jaw 44.044
Vigor Optical
notched inside jaws for secure screw holding.
Stainless steel construction for durability.
Squeeze to lock, then again to unlock.
Lightweight pliers hold screw in vertical or
horizontal positions.
46.225. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
Slimline Endpiece Nylon Jaw Pliers
44.048
Vigor Optical
Used for making tight, smooth bends in nosepad arms and reducing bridge distances on
metal frames.
46.658. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
Very small 18mm flat nose pliers with 4mm
tapering to 7.5mm jaws. Total pliers length
4.75”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
V Endpiece Bracing Pliers
Vigor Optical
Snip It
Vigor Optical
Small adjusting pliers with 19mm nylon round
jaws.Extra protection for delicate frame materials. Jaws taper from 2.25mm to 6mm. Total
pliers length 4.75”. . . . . . . . . . . . . . . . . . $20.00
Safety Lens Marking Pliers 44.153
Vigor Optical
Small endpiece adjusting pliers with 20.5mm
nylon jaws. One 2.0mm - 6.2mm tapered
nylon jaw and one flat 7.5 - 8.5mm nylon jaw
gives extra protection for delicate frame materials. Total pliers length 4.75”. . . . . . . . . $20.00
Slimline Spek-Tek
Useful for bending and adjusting thin metal
frames and rimless end pieces. One tapered
Three-piece frame mounting screw snipper for metal jaw and a special grooved nylon jaw.
snipping 3-piece mounting screws. Strong Total jaw length 23mm. Metal jaw 1.5mm at
tip. Nylon jaw heights 10mm. Groove in nylon
cutting action, 1.5mm cutting hole.
46.217. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $24.00 jaw is 3.8mm wide and 2mm deep. Stainless
steel. Total pliers length 6”. . . . . . . . . . . $20.00
Snipe & Chain Nose Pliers
Vigor Optical
Vertical Compression Closing Pliers
Vigor Optical
Vigor Optical
Marking pliers used to scribe identification on
resin safety lenses. The custom stamp die
(allow 6 weeks for delivery) is created to
OSHA specs. The nylon jaw protects the back
side of the lens. Pliers are shipped with up to
3 letters. Specify letters for die. . . . . . . $160.00
Screw Insertion Pliers
Vigor Optical
46.01105 Slimline Chain Nose Pliers . . . . . . . . . $30.00
Spek-Tek Slimline Pliers, nylon jaw with one 46.047 Spek-Tek Flat & Round Nose Pliers . . . . $20.00
flat and one round jaw. Multi-purpose for 46.5065 Hollow Snipe Pliers . . . . . . . . . . . . . . . . $20.00
adjusting metal end pieces, pad arms and 46.724 Chain Nose Pliers . . . . . . . . . . . . . . . . . . $32.00
eyewires. Length overall: 5”. Jaw laper: 1.5Spek-Tek Sizing/Screw Insertion
4.5mm. 3oz.
Specially designed for vertical compression
mountings.. Thin 6mm nylon jaws whith 7mm
vertical groove securely grabs bushing for
both closing and bracing. Total length 6”.. . .
46.053. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
$20.00
Slimline Spek-Tek Bracing Pliers
Pliers
Vigor Optical
Vigor Oblique Cutters
Vigor Optical
Vigor Optical
The 46.5250 has unique curved tips with a
1.3mm slot that are great for grabbing screw
heads, or adjusting the verticle angle of nosepads. It also grips screws more securely than
Small, delicate point on lower jaw holds hinge
closed for eyewire sizing. Upper jaw with
For general use on both zyl and metal frames. center hold allows screw insertion for oneslot also useful for endpiece bracing on some
5” length with leaf spring, one metal, one step sizing and lens mounting. Shipping 46.201/PL 7291 Top-Quality Oblique . . . . . . . . $120.00
drill mount thin wire frames. 5”. 8oz.
nylon jaw.
46.816/PL 769 45° Cut Oblique . . . . . . . . . . . . . $96.00
weight 4oz.
tweezers for any screw insertion job. Screw
46.5250. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
46.055. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
46.065. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
Reduced Price!
10/12/11 11:05 AM
48
FINISHING TOOLS
1007V Guild Eyewire Closing Plier
Pliers
Western Optical
1011V Guild Narrow Eyewire and
Bridge Forming Plier
1015V Guild Double Delrin Jaw Plier
Western Optical
Western Optical
Wide Jaw Bracing Pliers
Vigor Optical
Western’s newly redesigned sizing plier features replaceable points. Points hold the
eyewire closed so that you can quickly confirm proper lens shape and size without insertBack by demand, these 10mm nylon jaw bracing the eyewire screw. Hand-conforming grip
ing pliers exert even pressure to temples and for extra comfort, non-slip handles and
thereby do not mar frames. Especially useful spring-open jaws.Replaceable Tips.
1007V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $28.00
for plastics and wide temples. 5-1/2”. 6oz.
46.5767. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
1008V Guild Numont Plier
Wide Jaw Pantoscopic Angling Pliers
Western Optical
Vigor Optical
Western has reconfigured the classic eyewire
forming pad to a narrow 15mm width for
today’s smaller frames. The diminutive Delrin
jaw can also be used to alter the bridge size
or curvature on most frames and frame materials, and can also be used to adjust temple
tips. Hand-conforming grip for extra comfort,
non-slip handles and spring-open jaws.
1011V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $30.00
1012V Guild Combination Chain Nose
Round/8mm Delrin Jaw Plier
An old favorite just got better! Western’s new,
improved Delrin pads are only 8mm wide, letting you get into restricted spaces. The pads
are also dovetailed so that replacing them is
quick and easy. Use the Guild Double Delrin
Jaw Plier to grip either plastic or metal frames
when bending temples or altering the eyewire.
Hand-conforming grip for extra comfort, nonslip handles and spring-open jaws.
1015V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $32.00
1016V Guild Rimless Bracing Plier
Western Optical
Western Optical
This classic plier has a new look and improved
Wide jaw opening allows you easy access to application. The jaws are grooved for adjusting rimless mountings and rounded metal
hinge for pantoscopic angling. Hollow jaw
temples. Two groove diameters, 1mm and
ends protect screwhead. Length 51_2”.
2mm, ensure a tight grip on material. Hand46.5699. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
conforming grip for extra comfort, non-slip
ZYL Gripping Pliers
handles and spring-open jaws.
Vigor Optical
1008V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $28.00
1009V Guild Wide Jaw Angling Plier
Western Optical
This plier is a “Must Have” tool and will be a
favorite in the dispensary. Use it to adjust the
angle of the end piece without marring the
frame. The 8mm wide exclusive dovetail
Delrin pad protects the frame surface. The
round metal jaw tapers to a fine point to fit
into tight spaces. Hand-conforming grip for
extra comfort, non-slip handles and springopen jaws.
1012V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $30.00
1013V Guild Combination Chain Nose
Flat/8mm Delrin Jaw Plier
Western Optical
Genuine Antique. Limited inventory discovered. Designed to grip the ZYL temple without
marring. Construction facilitates many gripping and contouring operations. Also useful
for gripping the endpiece while angling the
temple. Fiber notched jaws. No replacement
jaws available. 5 _” length . . . . . . . . . . . $20.00
1006V Guild Sizing and Screw
Inserting Plier
Western Optical
Easily adjust the amount of desired pantoscopic tilt on all types of frames. The extrawide jaw opening accommodates large temples and hinges. The recessed hole in each
jaw protects the head and the end of the
This plier is a “Gotta Have It” tool for your
screw. Hand-conforming grip for extra comdispensary. Use it to adjust the angle of the
fort, non-slip handles and spring-open jaws.
end piece without marring the frame. The
1009V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $28.00
8mm wide exclusive dovetail Delrin pad protects the frame surface. The flat metal jaw
1010V Guild Eyewire Forming Plier
tapers to a fine point to fit into tight areas.
Western Optical
1013V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $30.00
1014V Guild Round/Flat Nose Plier
Western Optical
At last the dispenser can fearlessly adjust a
drilled rimless mounting wihtout cracking or
breaking the lens! The exclusive Western
dovetail Delrin padded jaw has a channel that
holds the screw head without scratching the
lens. The slotted metal jaw securely grips the
glass screw at the retaining nut. With the
mounting held firmly you can safely adjust the
end piece, the temple, or the bridge. Handconforming grip for extra comfort, non-slip
1016V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $32.00
1016V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $32.00
1024V Guild Oblique Head End Cutter
Plier
Western Optical
This heavy-duty cuting plier cuts screws and
rivets flush. The 24mm head is angled and
tapered to a fine point to provide easier
access to restricted areas. Use on soft metals
and plastics. Not intended for use on stainless
steel, titanium, or other extra-hard screws.
1024V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $28.00
1026V Guild Side Cutting Plier
Western Optical
Another Western first! In one simple procedure, quickly and accurately size the lens in
the eyewire. While holding the eyewire closed
with Western’s guild sizing and screw inserting plier, you can easily insert and tighten the
eyewire screw. Not only is this tool a real time
saver, it reduces the possibility of damage to
lenses or frames by keeping the screwdriver
from slipping off the eyewire screw head.
Hand-conforming grip for extra comfort, nonslip handles, and spring-open jaws.
Our new improved Delrin pads gently but
firmly reshape metal eyewire to conform to the
base curve of the lens. The Guild Eyewire
Forming Plier can also be used with Polyamide
frames or lightly warmed plastic frames.
Western’s exclusive screw-free dovetail pads
eliminate both the bother of replacing screwon type pads and the possibility of the screw
marring the frame. Hand-conforming grip for
This traditional favorite, also known as a “Half
Round” or “Looping Plier”, has many applications. The most popular use is for the adjustment of “American” pad arm curvature and
nose pad height. Hand-conforming grip for
The narrow head and side cutting action gives
easy access to hard to reach screws. The cutting edge measures 15mm long and cuts
flush. For use on soft metals and plastics. Not
intended for stainless, titanium or other extrahard screws. Hand-conforming grip for extra
comfort, non-slip handles and spring-open
jaws.
1006V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $32.00
1010V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $30.00
1014V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $28.00
1026V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $28.00
10/12/11 11:05 AM
FINISHING TOOLS
Pliers
1027F Guild Narrow Flush End Cut
5mm Plier
Western Optical
taper to a fine point. This long nose chain plier
is ideal for gripping in hard to reach areas.
1039V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $28.00
1040V Guild Long Nose Chain Plier
Western Optical
49
into tight spaces on fine frames, this Western a minimum diameter of 15mm. 6” long and
plier comes to the rescue. One jaw is a 5mm hefty for added leverage.
nylon-sleeved round dowel that grabs the 2006F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $29.00
outside of the end piece. The opposing
2006V Briot Axcell DeBlocking Plier
2.5mm jaw securely grips the end piece from
the inside. Traditional grip, non-slip handles
Western Optical
and spring-open jaws.
2002V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $15.00
2004F Premium Temple Bending Plier
Western Optical
This could become your favorite end cutting
plier. Cutting the excess from screwless rimless compression tubing is easy and safe with
the 5mm wide head. Rounded jaws prevent
accidental scratching of the lens. Provides
clean, flush cuts on rimless mounting screws
or eyewire screws in a tight spot. Not intended
for stainless steel, titanium or other extra-hard
screws. Hand-conforming grip for extra comfort, non-slip handles and spring-open jaws.
1027F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $29.00
The classic long nose plier for shaping and
bracing. Flat and smooth inside, rounded
outside. Adjusts bridges, pad arms and temples, or simply makes picking up a screw Adjusting end piece curves just became easy.
easier. Hand-conforming grip for extra com- Western’s Temple Bending Plier possesses a
tiered range of preformed hard Delrin plastic
fort, non-slip handles and spring-open jaws.
1040V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $28.00 arcs to aid you in easily curving end pieces.
Obtain the most comfortable and individual1044V Screw Riveting Plier
ized bend for your patient. A truly versatile
Western Optical
tool. Traditional grip, non-slip handles and
spring-open jaws.
2006v Vinyl Grip. . . . . . . . . . . . . . . . . . . . . . . . . . $28.00
2007V Premium Eyewire Closing Plier
Western Optical
2004F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $29.00
1027V Guild Narrow Flush End Cut
5mm Plier
2004F Temple Bending Plier
Western Optical
Western Optical
Designed with Briot to match the Axcell style
magnetic chuck pads. Securely grips the circumference of the plastic portion of the block
without touching the magnetic cap. Fits all
blocks with a diameter of 15mm.
The quick and easy way to flare the end of a
hinge screw to keep it from dropping out of
the hinge. A sturdy, sharp point flares the end
of the screw while a hole on the opposite jaw
protects the screw head. The Guild Screw
Flaring Plier gives a professional finish to the
flared screw, prevents lost screws and eliminates patient and dispenser inconvenience.
Hand-conforming grip for extra comfort, non- A range of stepped Delrin plastic arcs aid you
in easily curving end pieces on temples.
slip handles and spring-open jaws.
1044V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $28.00 Obtain the most comfortable and individualized bend for your patient.
1050V The Maestro Screwless
Rimless Compressing/Bracing Plier
Western Optical
1027V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $28.00
Premium #2004F (foam grip)
Also known as Western’s “Sizing Plier”, this
efficient tool allows you to quickly confirm
proper lens size by closing down the eyewire
without inserting the screw. Round-tipped
jaws will not damage the eyewire screw barrel.
Traditional grip, non-slip handles and springopen jaws.
2007V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $25.00
2008V Premium Numont Plier
Western Optical
2004F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $29.00
2005F Premium Deblocking Plier
Western Optical
1030V Guild Nose Pad Adjusting Plier
Western Optical
The master plier for assembling, tightening
and bracing the screwless, rimless compression frames. Opposing Delrin jaws are dual
grooved to cradle the metal and plastic components on both the horizontal and vertical
axis, minimizing the risk of slipping and
scratching the lens. One jaw pivots to compensate for base curve so the post and tubing
compress in unison. Opens extra wide for
thick lenses.
The secure way to safely and easily adjust all
types of nose pads. The cupped jaw for cradling the pad is matched to a slotted jaw for
securely bracing the nose pad box and arm.
Makes repositioning the nose pad easy.Handconforming grip for extra comfort, non-slip
handles and spring-open jaws. Specially con1050V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $32.00
figured fpr Hilco Logic nose pads.
1030V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $28.00
1050V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $32.00
1039V Guild Curved Tip Chain Nose
Plier
2002V Premium Very Fine Combo
Chain Nose/Nylon Plier
Western Optical
Western Optical
The single grooved jaw ensures a tight grip on
rimless mountings and round metal temples.
Will not mark the frame while making adjustRemove a Weco, Briot or Nidex style finishing ments. Traditional grip, non-slip handles and
block without scratching the lens. Suitable for
spring-open jaws.
most metal, rubber and plastic finishing
blocks 15mm in diameter. Exclusive adjust- 2008V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $25.00
ment screw to customize the grip on the
2009F Premium Wide Jaw Angling
block.
2005F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $29.00
Plier
2006F Premium Deblocking Plier for
Briot Axcell
Western Optical
Western Optical
Best bet for adjusting pantoscopic tilt and
temple angles on all types of frames. Opens
extra-wide to accommodate large temples
and hinges. The recessed hole in each jaw
protects the hinge screw.
Designed in conjunection with Briot to match
the Axcell style magnetic chuck pads.
Securely grips the circumference of the plasWestern has put a new angle on a classic Delicate end pieces can now be easily adjust- tic portion of the Block without touching the
general-purpose plier with curved jaws that ed! When other pliers are just too large to fit magnetic cap. Also fits all plastic blocks with 2009F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $26.00
10/12/11 11:05 AM
50
FINISHING TOOLS
Pliers
2009S Premium Wide Jaw Angling
Plier
2012F Premium Combination Chain
2013S Premium Combination Chain
2015F Double Delrin Jaw Plier
Nose Round/8mm Delrin Jaw Plier
Nose Flat/8mm Delrin Jaw Plier
Western Optical
Western Optical
Western Optical
Western Optical
A “must have” tool that is a dispensary favorite! Use it to adjust the angle of the end piece
without marring the frame. The 8mm wide
Best bet for adjusting pantoscopic tilt and exclusive dovetail Delrin pad protects the
temple angles on all types of frames. Opens frame surface. The round metal jaw tapers to
extra-wide to accommodate large temples a fine point to fit into tight spaces.
Premium #2012F (foam grip)
The classic combo! Use it to adjust the angle
of the end piece without marring the frame.
The 8mm wide dovetail Delrin pad protects
the frame surface. The flat metal jaw tapers to
a fine point to fit into tight areas.
Use to grip plastic or metal frames when
bending temples or altering the eyewire.
Superior Delrin pads are only 8mm wide,
allowing you to get into restricted spaces. The
pads are dovetailed so replacing them is
quick and easy.
2013S Naked Steel Grip . . . . . . . . . . . . . . . . . . . $30.00
2015F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $30.00
2012F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $28.00
2013V Combo Flat Chain Nose/Delrin
2015V Double Delrin Jaw Plier
2009V Premium Wide Jaw Angling
Plier
2012S Premium Combination Chain
Plier
Western Optical
Western Optical
Western Optical
Western Optical
wide to accommodate large temples and
hinges. The recessed hole in each jaw protects the hinge screw. Traditional grip, nonslip handles and spring-open jaws.
2009V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $25.00
2010F Premium Eyewire Forming
Plier
Western Optical
exclusive dovetail Delrin pad protects the
frame surface. The round metal jaw tapers to
a fine point to fit into tight spaces.
This plier is a “Gotta Have It” tool for your
dispensary. Use it to adjust the angle of the
end piece without marring the frame. The
8mm wide exclusive dovetail Delrin pad protects the frame surface. The flat metal jaw
tapers to a fine point to fit into tight areas.
2012V Premium Combination Chain
2013V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $27.00
2014S Premium Round/Flat Nose
Western Optical
Plier
An old favorite improved! Use to grip plastic
or metal frames when bending temples or
altering the eyewire. Western’s new, improved
Delrin pads are only 8mm wide, allowing you
to get into restricted spaces. The pads are
also dovetailed so that replacing them is quick
and easy. Traditional grip, non-slip handles
and spring-open jaws.
2015V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $29.00
2016V Pad Arm Curving Plier
Western Optical
Western Optical
Delrin pads gently but firmly shape the metal
eyewire to conform to the base curve of the
lens. Safe to use on polyamide or lightly
warmed plastic frames. Exclusive screw-free
dovetail pads eliminate the bother of replacing screw-on type pads and the possibility of
the screw marring the frame.
2010F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $28.00
2010V Premium Eyewire Forming
Plier
Western Optical
A “Must Have” tool that will be a favorite in
your dispensary. Use it to adjust the angle of
the end piece without marring the frame. The
8mm wide exclusive dovetail Delrin pad protects the frame surface. The round metal jaw
tapers to a fine point to fit into tight spaces.
2012V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $27.00
Put the curve back into bent pad arms in one
squeeze. The top jaw is concave and the
Known also as a “half round” or “looping
opposing jaw is tapered to fit inside. Pressing
plier”, this tool has many applications. The
the pad arm into the pre-curved jaw easily
most popular use is for adjusting ”American”
forms the smooth sweep you need. No more
pad arm curvature and nose pad height.
2014S Naked Steel Grip . . . . . . . . . . . . . . . . . . . $28.00 time misspent wrestling with adjustments and
damaging the pad arm. Traditional grip, non2014V Premium Round/Flat Nose
slip handles and spring-open jaws.
2013F Premium Combination Chain
Plier
2016V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $30.00
Nose Flat/8mm Delrin Jaw Plier
Western Optical
2017V Zyl Gripping Plier
Western Optical
Western Optical
Gently, but firmly, reshape the metal eyewire
to conform to the lens base curve. Can also
be used on polyamide frames or lightly
warmed plastic frames. Exclusive screw-free
Delrin dove tail pads eliminate the bother of
replacing screw-on type pads and the possibility of the screw marring the frame.
A traditional favorite, also known as a “half
round” or “looping plier”. Its many applications include easily adjusting “American” pad
arm curvatures and nose pad height.
Use for angling temples on plastic frames
while protecting the hinge and shield.
2010V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $27.00
2013F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $28.00
2014V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $25.00
2017V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $25.00
10/12/11 11:05 AM
FINISHING TOOLS
Pliers
2024V Oblique Head End Cutter Plier
2026V Side Cutting Plier
Western Optical
Western Optical
2018S Spring Hinge Plier Kit
Western Optical
51
feature matching four base curves to reduce
stress on the center of high minus, thin center
lenses. The pads encapsulate the metal
mounting bracket and their movement is
restricted so there is no opportunity to accidentally scratch lenses. Accommodates lenses up to 90mm diameter.
2029F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $32.00
2029V Lens Turning Plier – 25mm
Curved Pads
Western Optical
A versatile favorite, the narrow head and side
This heavy duty cutting plier has a 24mm long cutting action gives easy access to hard to
cutting edge. The head tapers to a fine point reach screws. The cutting edge measures
15mm long. For use on soft metals and plasto cut screws flush in restricted areas. For use
tics. Not recommended for use on stainless
At last there is an effective tool for assembling
on
soft
metals
and
plastics
but
not
for
use
on
steel or other hard metals. Traditional grip,
spring hinge frames! Western’s unique
approach to solving the spring hinge problem harder metals such as stainless steel. non-slip handles and spring-open jaws.
has won us accolades from around the world. Traditional grip, non-slip handles and spring- 2026V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $25.00
2028F Lens Turning Plier – 20mm
This easy to use tool set allows you to extend
open jaws.
the spring hinge barrel and grab it gently, yet
Curved Pads
2024V Vinyl Group . . . . . . . . . . . . . . . . . . . . . . . . $25.00
securely. By extending the barrel you can
Western Optical
align the temple with the frame front and eas- 2025F Oblique Head End Cutter Plier
ily insert the hinge screw. With a little practice,
for Hard Metals
you will single handedly assemble those frustrating spring hinge frames in seconds.
Western Optical
2018S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $44.00
2019V Tri-Angling Plier
Western Optical
Western keeps improving on the classics. The
traditional lens turning plier or axis aligning
plier is now equipped with 25mm round pads
for larger eyesizes. The new style pads also
stress on the center of high minus, thin center
lenses. The pads encapsulate the metal
mounting bracket and their movement is
restricted so there is no opportunity to accidentally scratch lenses. Accommodates lenses up to 90mm diameter.
2029V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $31.00
2030F Nose Pad Adjusting Plier
Western Optical
Slices through stainless steel and other hard
metals. The 22mm cutting edge is angled and
Let Western throw you a curve! You can easily
bring three-piece mounting temples in or out
without putting any pressure on the lens. An
excellent tool for adjusting delicate corners or
reshaping a clip-on to conform to the shape of
a frame. Traditional grip, non-slip handles and
spring-open jaws.
2019V Vinyl Group . . . . . . . . . . . . . . . . . . . . . . . . $30.00
2020V Rimless Post Puller Plier
tapered to a fine point for close cuts without
damaging the frame. Made of tempered carbon stainless steel.
2025F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $33.00
2025V Oblique Head End Cutter for
Stainless Steel Screws
Western keeps improving on the classics.
The traditional lens turning plier or axis aligning plier is now equipped with 20mm round
pads for smaller eyesizes. The new style pads
also feature matching four base curves to
reduce stress on the center of high minus, thin
center lenses. The pads encapsulate the
metal mounting bracket and their movement
is restricted so there is no opportunity to acciThe secure way to safely and easily adjust all
dentally scratch lenses.
Accommodates
types of nose pads. The cupped jaw for cralenses up to 90mm diameter.
2028F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $32.00 dling the pad is matched to a slotted jaw for
2028V Lens Turning Plier – 20mm
Makes repositioning the nose pad easy. All
Curved Pads
models are specially configured for Hilco®
Logic nose pads®.
Western Optical
2030F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $26.00
Western Optical
2030S Nose Pad Adjusting Plier
Western Optical
The Post Puller safely disengages the bridge
and temple from compression rimless lenses.
Prevents lens breakage that often results from
the attempt to extract the post and tubing by
hand. A practical solution to a costly problem.
Western Optical
Western keeps improving on the classics. The
traditional lens turning plier or axis aligning
This rugged nipper slices through stainless plier is now equipped with 20mm round pads
for smaller eyesizes. The new style pads also
steel and other hard metal screws and rivets.
The 22mm cutting edge is angled and tapered stress on the center of high minus, thin center
to a fine point for close cuts without damaging lenses. The pads encapsulate the metal
the frame. Made of tempered carbon stainless mounting bracket and their movement is
restricted so there is no opportunity to accisteel. Traditional grip, non-slip handles and dentally scratch lenses. Accommodates lensspring-open jaws.
es up to 90mm diameter.
2020V Vinyl Group . . . . . . . . . . . . . . . . . . . . . . . . $27.00
2020V Vinyl Group . . . . . . . . . . . . . . . . . . . . . . . . $27.00
2025V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $32.00
2028V
Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $31.00
2024F Oblique Head End Cutting Plier
2026F Side Cutting Plier
Western Optical
Western Optical
2029F Lens Turning Plier – 25mm
Curved Pads
models are specially configured for Hilco®
Logic nose pads®.
2030V Nose Pad Adjusting Plier
Western Optical
Western Optical
securely bracing the nose pad box and arm
assembly. Makes easy work of manipulating
This heavy-duty cutting plier has a 24mm long The narrow 15mm cutting edge and side cutthe position of the nose pad, even the latest
cutting edge. The head tapers to a fine point
Western keeps improving on the classics. The European styles. Traditional grip, non-slip
ting action gives easy access to hard to reach
traditional lens turning plier or axis aligning handles and spring-open jaws. Specially conto cut screws flush in restricted areas. Use on
screws. Use only on soft metals and plastics. plier is now equipped with 20mm round pads figured for Hilco Logic nose pads.
soft metals and plastics only.
2024F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $26.00 2026F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $26.00 for smaller eyesizes. The new style pads also 2030V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $25.00
10/12/11 11:05 AM
52
FINISHING TOOLS
or of the pad arm to adjust its curvature.
Pliers
2032V Nose Pad Popping Plier
2035V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $27.00
Western Optical
2037F Bridge Reducing Plier
2040F Long Nose Chain Plier
Western Optical
Western Optical
2042AW Wide 3.0mm Hollow . . . . . . . . . . . . . $6.50 ea.
2042EA Short for Eyewire Punch . . . . . . . . . . $6.50 ea.
QuikFix Rivets
2042QFG Gold, 100 pcs . . . . . . . . . . . . . . . . . . . $10.00
2042QFGM Gunmetal, 100 pcs . . . . . . . . . . . . . $10.00
2042QFS Silver, 100 pcs . . . . . . . . . . . . . . . . . . . $10.00
Screw Ejector
2042EP Eyewire. . . . . . . . . . . . . . . . . . . . . . . . $6.50 ea.
2042P Hinge . . . . . . . . . . . . . . . . . . . . . . . . . . $6.50 ea.
2044V Screw Flaring Plier
Western Optical
Quickest, easiest and most secure way to
remove push-in nose pads from the box without distorting the pad arm. An efficient, solid
plier for the price of our competitor’s tweezerstyle contraption. Traditional grip, non-slip
2032V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $27.00
2034F Screwless Rimless
Compressing Plier/Laboratory Use
Western Optical
Flat and smooth inside, rounded outside,
these jaws are tapered to a fine point for
shaping and bracing. Adjusts bridges, pad
arms and temples, or simply makes picking
up a screw easy.
Three jaws engage the bridge from above and
below for extreme bridge reduction. Use to
create a more comfortable fit and to reduce
the PD. Useful for bending the eyewire to alter
the base curve. For metal and plastic frames.
2040F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $26.00
2040S Long Nose Chain Plier
Western Optical
Western provides you with a quick and easy
way to flare the end of a hinge screw to keep
it from coming out of the hinge. A sturdy sharp
point flares the end of the screw while the hole
on the opposite jaw protects the screw head.
Prevents lost screws and eliminates patient
and dispenser inconvenience. Traditional grip,
non-slip handles and spring-open jaws.
2037F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $33.00
2037V Bridge Reducing Plier
Western Optical
2044V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $25.00
2045F Finger Piece Plier
up a screw easy.
Western Optical
Constructed to withstand the extra pressure
of the initial assembling of compression rimless frames. Stationary Delrin jaws are dual
axis, minimizing the risk of scratching the
lens. Finger bracing handle is designed for
squeezing without slipping.
2034F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $40.00
2034V Screwless Rimless
2040V Long Nose Chain Plier
Three jaws engage the bridge from above and
below for extreme bridge reduction. Use to
create a more comfortable fit and to reduce
the PD. Useful for bending the eyewire to alier
the base curve for metal and plastic frames.
Western Optical
Securely grip the hinge or end piece on a
metal frame to modify the temple angle for
proper pantoscopic tilt. Lock onto metal
temples with the opposing grooves in the jaws
to make adjustments. Also used to grip the
front of a plastic frame that has a shield.
Recessed holes in the jaws protect the hinge
screw.
2037V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $32.00
2038V Hollow Snipe Nose Plier
Western Optical
Western Optical
Flat and smooth inside, rounded outside, 2045F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $26.00
2045V Finger Piece Plier
Western Optical
up a screw easy.
2040V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $25.00
2042 The Shootout Frame Repair
Multi-Tool Kit
Jaws are perfectly ground to produce flat tips
that are parallel when closed. Hollow jaws
permit tightening of nose pad strap against a
concave lens and making pad arm adjustments. No danger of chipping lens edges as
you reach over eyewires, end pieces or guard
arms with the curved, hollow jaws. Traditional
grip, non-slip handles and spring-open jaws.
Western Optical
Laboratory grade plier for assembling, tightening and bracing compression rimless.
Stationary Delrin jaws are dual grooved to
cradle the metal and plastic components on
both the horizontal and vertical axis, minimizing the risk of scratching the lens. Finger
bracing handle is designed for heavy squeezing without slipping. Handles are also non-slip
2038V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $25.00
coated with spring-open jaws.
2034V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $39.00
2034V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $39.00
2035V Combo Pad Arm/Nose Pad
Adjusting Plier
2039V Curved Tip Chain Nose Plier
Western Optical
Western Optical
Western has put a new angle on a classic
general-purpose plier with curved jaws that
taper to a fine point. Ideal for shaping and
bracing, this long nose chain plier grips in
hard to reach areas. Traditional grip, non-slip
Two in one gets the job done! Nose pad and
nose pad arm adjusting tool all in a single
plier. Specially designed jaws safely grab and
adjust the nose pad and box. The unique jaw
tips securely pinch the interior and the exteri- 2039V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $25.00
Securely grip the front of a plastic frame that
has a shield, or grip the hinge or end piece on
a metal frame to modify the temple angle for
proper pantoscopic tilt. A recessed hole in
each jaw protects the hinge screw. Traditional
grip, non-slip handles and spring-open jaws.
The tool that saves you time six ways: 2045V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $25.00
Punches out hinge and eyewire screws,
3009F Wide Jaw Angling Plier
replaces the hinge screw with a QuikFix rivet,
Western Optical
re-establishes a screwdriver slot in a damaged screw head, and flares or peens the
screw end. The Shootout arms you with the
most power available in a hand tool. The patented lever mechanism takes a gentle
squeeze transforming it into controlled pressure to reduce damage to the barrel when
ejecting broken screws. The Shootout is easy
to align and comfortable to grip even for the
smallest hands.
2042 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.00
Replacement Components:
2042PC Cupped Point . . . . . . . . . . . . . . . . . .
2042PF Flaring Point. . . . . . . . . . . . . . . . . . . .
2042PS Slotting Point . . . . . . . . . . . . . . . . . . .
Anvil
2042A 2.7mm Hollow . . . . . . . . . . . . . . . . . . .
2042AN Narrow 2.0mm Hollow. . . . . . . . . . . .
2042AS Solid . . . . . . . . . . . . . . . . . . . . . . . . . .
$6.50 ea.
$6.50 ea.
$6.50 ea.
$6.50 ea.
$6.50 ea.
$6.50 ea.
extra-wide to accommodate large temples
3009F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $21.00
10/12/11 11:05 AM
FINISHING TOOLS
3014F Round/Flat Nose Plier
(Budgetool)
Pliers
Western Optical
3012F Combo Round Chain Nose/
3024F Oblique Head End Cutting Plier
53
3030F Nose Pad Adjusting Plier
(Budgetool)
(Budgetool)
Western Optical
Western Optical
Delrin Plier
Western Optical
exclusive dovetail Delrin pad protects the
frame surface. The round metal jaw tapers to
a fine point to fit into tight spaces.
Known also as a “half round” or “looping
plier”, this tool has many applications. The
This heavy-duty cutting plier has a 24mm long
most popular use is for adjusting ”American”
types of nose pads. The cupped jaw for cracutting edge. The head tapers to a fine point
pad arm curvature and nose pad height.
dling the pad is matched to a slotted jaw for
3014F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $19.00
to cut screws flush in restricted areas. Use on securely bracing the nose pad box and arm.
3014V Round/Flat Nose Plier
soft metals and plastics only.
(Budgetool)
3024F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $19.00 models are specially configured for Hilco®
Western Optical
Logic nose pads®.
3024V Oblique Head End Cutter Plier
3012F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $21.00.
(Budgetool)
3012V Combo Round Chain Nose/
Western Optical
Delrin Pliers (Budgetool)
3030F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $19.00
3030V Nose Pad Adjusting Plier
(Budgetool)
Western Optical
Western Optical
Also known as a “Half Round” or “Looping
Plier”. Its many applications include easily
adjusting “American” pad arm curvatures and
nose pad height. Traditional grip with non-slip
handles.
3014V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $18.00
A dispensary standard used to adjust the
frame. The 8mm wide exclusive dovetail delrin
pad protects the frame surface. The round
metal jaw tapers to a fine point to fit into tight
spaces. Traditional grip with non-slip handles.
3012V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
3013F Combo Flat Chain Nose/Delrin
Plier
Western Optical
3015F Double Delrin Jaw Plier
Western Optical
The 19mm head tapers to a fine point to cut Confidently reposition any nose pad. One jaw
screws flush in restricted areas and is angled is cupped for cradling the pad, the other is
to reach easily into tight areas. For use on soft slotted for securely bracing the nose pad box
and arm assembly. Traditional grip with nonmetals and plastics but not for use on harder
slip handles. Speically configured for Hilco
metals such as stainless steel. Traditional grip
Logic Nose Pads.
with non-slip handles.
3030v Vinyl Grip. . . . . . . . . . . . . . . . . . . . . . . . . . $18.00
Superior Delrin pads are only 8mm wide,
allowing you to get into restricted spaces. The
pads are dovetailed so replacing them is
3024V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $18.00
quick and easy.
3015F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $23.00
3015V Double Delrin Jaw Plier
(Budgetool)
3026F Side Cutting Plier (Budgetool)
Western Optical
3031S Nose Pad Inserting Plier
(Budgetool)
Western Optical
Western Optical
3013F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $21.00
3013V Combo Flat Chain Nose/Delrin
Delrin pads are only 8mm wide, allowing you
to get into restricted spaces. The pads are
dovetailed so that replacing them is quick and
easy. Traditional grip with non-slip handles.
3015V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $22.00
Plier (Budgetool)
3024F Oblique Head End Cutter Plier
(Budgetool)
Western Optical
Western Optical
The narrow 15mm cutting edge and side cut- You’re going to love us for having designed
ting action gives easy access to hard to reach this tool. Gone are the days of trying to force
screws. Use only on soft metals and plastics. a push-in style nose pad into the pad box and
bending the pad arm in the process. Use the
3026F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $19.00
NPI to gently pop the nose pad into place
3026V Side Cutter Plier (Budgetool) without changing the nose pad position. This
mini plier is so helpful that you will want one
Western Optical
at each dispensing station.
3036V Round/Round Nose Plier
(Budgetool)
Western Optical
The narrow 15mm cutting edge and side cut-
A dispenser’s favorite tool used to adjust the
frame. The flat metal jaw tapers to a fine point
to fit tight spaces. The 8mm wide exclusive
dovetail Delrin pad protects the frame surface
from marring. Traditional grip with non-slip
handles.
The 19mm head tapers to a fine point to cut
screws flush in restricted areas and is angled
to reach easily into tight areas. For use on soft
metals and plastics but not for use on harder
metals such as stainless steel. Traditional grip
with non-slip handles.
3013V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
3024F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $18.00
ting action gives easy access to hard to reach
screws. For use on soft metals and plastics.
Not recommended for use on stainless steel
or other hard metals. Traditional grip with non- Both jaws are round and taper to fine points.
slip handles.
Traditional grip with non-slip handles.
3026V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $18.00
3036V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $18.00
10/12/11 11:05 AM
FINISHING TOOLS
54
3041V Chain Nose Plier (Budgetool)
5026F Concorde Carbide Cutters
5119F PJ End Piece Adjusting Plier
Western Optical
Western Optical
Western Optical
Pliers
3037V The Screw In-Forcer
Western Optical
Traditional length jaws are flat and smooth
inside, rounded outside and taper to a fine
point for shaping and bracing. Adjusts bridg- These “top of the line” cutters combine cares, pad arms and temples, or simply makes bide steel cutting tips with military grade
picking up a screw easier. Traditional grip with superior tensile-strength stainless steel.
Tired of fumbling with screws? Western’s non-slip handles.
Comfortable foam covered extra leverage
Screw In-Forcer is your answer. A slotted 3041V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $18.00
handles provides precise control for nearly
5021S Post Pushing Plier
notch in the curved tip of the finely tapered
flush cuts. The gap screw keeps the cutting
jaws securely grips the head of any screw.
Western Optical
action light and smooth by preventing the
Especially effective for nose pad screws and
blades from touching and becoming dull.
spring hinge screws when extra downward
13mm wide cutting edge and 6-1/2” long.
pressure is needed. Traditional grip with non5026F Side cutting plier for hard metals, Foam Grip . .
slip handles.
$49.00
3037v Vinyl Grip. . . . . . . . . . . . . . . . . . . . . . . . . . $18.00
5112F PJ Temple Angling Plier
3039V Curved Tip Chain Nose Plier
Western Optical
(Budgetool)
Parallel action jaws excel when making
adjustments to the temple, barrel and front
piece on any eyewear style or frame material.
(Conventional pliers with scissor closing
action will pinch thicker materials and mar the
frame.)
PJs feature long, comfortable foam covered
grips and narrow jaws that fit comfortable in
tight areas.
The Tri-Angling Plier is the perfect tool for
adjusting nylon cord rimless or any fine metal
endpiece. Manipulates the temples without
putting pressure on the eyewire, endpiece or
lens. Use a piece of cellophane tape to protect the frame surface and then safely bring
temples in or out without stressing the frame.
An excellent tool for making adjustments to
delicate corners. Or for reshaping clip-on to
conform to the frame.
5119F
Foam Grip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $45.00
Western Optical
Extracting the post and tubing from a com5140F PJ Long Chain Nose Plier
pression rimless lens presents many hurdles.
Western Optical
To remove the fixture from the hole requires
great force gently and accurately applied to
this fragile area. Western’s solution is to engineer a new concept in pliers. The Post Pusher
combines tremendous pressure delicately and
effortlessly applied to gently push the post
and tubing from the holes. Pins pivot easily to Parallel jaw pliers for unparalleled function.
accommodate horizontal and vertical mountJaws that close parallel are perfect for use on
Classic general-purpose plier with curved ing systems. Specs: 7-1/2” long.
jaws that taper to a fine point. Ideal for shap- 5021S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $43.00 thick materials, grip more securely and resist
5021S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $43.00 marring eyewear.
Parallel action jaws excel when making
ing and bracing, this long nose chain plier
adjustments to the temple, barrel and front
5024F Concorde Carbide Cutters
works especially well in hard to reach areas.
piece on any eyewear style or frame material.
Western Optical
Traditional grip with non-slip handles.
grips and narrow 8mm jaws that fit comfort- (Conventional pliers with scissor closing
3039V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $18.00
able in tight areas.
action will pinch thicker materials and mar the
frame.) Jaws that close parallel are perfect for
3040F Long Nose Chain Plier
The “must have” tool for the dispensary. Use use on thick materials, grip more securely and
it to adjust the angle of the end piece without resist marring eyewear.
Western Optical
marring the frame. The 8mm wide exclusive
dovetail Delrin pad protects the frame sur- grips and narrow jaws that fit comfortable in
face. The round metal jaw tapers to a fine tight areas.
point to fit into tight spaces.
5112F
Foam Grip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $42.00
These “top of the line” cutters combine carbide steel cutting tips with military grade
superior tensile-strength stainless steel.
Comfortable foam covered extra leverage
handles provides precise control for nearly
flush cuts. The gap screw keeps the cutting
action light and smooth by preventing the
blades from touching and becoming dull.
13mm wide cutting edge and 6-1/2” long.
5115F PJ Double Delrin Jaw Plier
Western Optical
3040V Long Chain Nose Plier
5140F
Foam Grip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $40.00
5145F PJ Pantoscopic Tilt Plier
5024F End cutting plier for hard metals, Foam Grip. . .
up a screw easy.
3040F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $19.00
up a screw easy.
Western Optical
$49.00
5026 Concorde Cutter
Western Optical
(Budgetool)
up a screw easier. Traditional grip with nonslip handles.
When only the best will do. Military grade
material coupled with sleek design features
and ultimate craftsmanship. Comfortable in
the hand and easy to control for precision
surgical cuts. Blades are kept fresh by manually adjusting the blade gap. Side cutting point
comes to a sharp focus so that you comfortably reach into claustrophobic areas to cut
any type of screw.
Parallel jaw pliers for unparalleled function.
Entirely new configuration for 21st century
eyewear designs. Jaws that close parallel are
perfect for use on thick materials, grip more
securely and resist marring eyewear. Parallel
action jaws excel when making adjustments
to the temple, barrel and front piece on any
eyewear style or frame material. (Conventional
pliers with scissor-closing action will pinch
thicker materials and mar the frame.) PJs
feature long, comfortable foam covered grips
and narrow 8mm wide jaws that fit comfortably in tight areas. Totally reengineered by the
“out-of-the-box” minds at Western Optical
Supply.
3040V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $18.00
5026 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $29.00
5115F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $44.00
Western Optical
Parallel jaw pliers for unparalleled function.
Entirely new configuration for 21st century
eyewear designs. Jaws that close parallel are
perfect for use on thick materials, grip more
securely and resist marring eyewear.
grips and narrow jaws that fit comfortable in
tight areas.
Securely grip the hinge, end piece or temple
edges on a metal frame to modify the temple
angle for proper pantoscopic tilt. A recessed
hole in each jaw protects the hinge screw
when working with the barrel. Groves in the
jaw prevent slipping when grabbing the temple directly.
5145F
Foam Grip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $40.00
10/12/11 11:05 AM
FINISHING TOOLS
55
Deluxe Optician’s Tool Kit
“M” Nose Pads
Coated Self Aligning Screw Kit
Dynamic Labs, Inc.
Vigor Optical
Vigor Optical
Replacement pads for small titanium frames.
13mm • Symmetrical • Super Thin •
Polycarbonate • Screw and Push Bases •
Sold in packages of 25 pairs & 50 pairs.
300 color coded coated self aligning spring
hinge screws. Packed in an easy selection
wheel. Collection included 3 diameters:
1.2mm, 1.4mm, & 1.6mm and 5 differing
lengths: 2.5mm, 3.0mm, 3.5mm, 4.0mm, &
4.8mm. 50 screws of each size. . . . . . . . $65.00
Pliers
Guild Finger Piece Plier
Western Optical
Includes:
Lab Cloth
Securely grip the front of a plastic frame that
has a shield, or grip the hinge or end piece on
a metal frame to modify the temple angle for
proper pantoscopic tilt. A recessed hole in
each jaw protects the hinge screw. Handcomforming grip for extra comfort, non-slip
1045V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $28.00
Replacement Parts Chart for Pliers
Western Optical
Zylonite File
88.0650 25 prs Push Base M Pad . . . . . . . . . . .
88.0650B 50 prs Push Base M Pad . . . . . . . . . .
88.0651 25 prs Screw Base M Pad . . . . . . . . . .
88.0651B 50 prs Screw Base M Pad . . . . . . . . .
Reduced Price!
Screwhead File
Finishing File
Screw Holding Tweezer
$14.50
$26.00
$14.50
$26.00
Coated Self Aligning Screws
Vigor Optical
15 in 1
Angling Pliers
Vigor Optical
Thin Bracing Pliers
Axis Pliers
Nosepad Pliers
Plier pad sizes are not interchangeable. Order
the replacement pad that matches the width Oblique End Cutter
and style of your existing pad.
Flat/Round Pliers
1000S Spring for Guild #1000 Series . . . . . . . . . . $3.00
1006A Hollow Anvil . . . . . . . . . . . . . . . . . . . . . . . . $6.50
1006P Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.50
1007P Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.50
1010A Dovetail Pad Set . . . . . . . . . . . . . . . . . . . . $4.00
1012A 8mm Dovetail Pad . . . . . . . . . . . . . . . . . . . $2.00
1012B 10mm Dovetail Pad . . . . . . . . . . . . . . . . . . $2.00
1013A 8mm Dovetail Pad . . . . . . . . . . . . . . . . . . . $2.00
1015A 8mm Dovetail Pad . . . . . . . . . . . . . . . . . . . $4.00
1015B 10mm Dovetail Pad . . . . . . . . . . . . . . . . . . $4.00
1016A Dovetail Pad. . . . . . . . . . . . . . . . . . . . . . . . $4.00
1028P Rubber Pad Oval Set. . . . . . . . . . . . . . . . . $4.00
1029P Rubber Round Pad Set . . . . . . . . . . . . . . . $4.00
1050P Pad Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.00
2000S Spring for Premium #2000 Series . . . . . . . $3.00
2002S Vinyl Sleeve Set . . . . . . . . . . . . . . . . . . . . . $2.00
2004P Pad Set. . . . . . . . . . . . . . . . . . . . . . . . . . . $10.00
2010P Screw-On Pad Set . . . . . . . . . . . . . . . . . . . $4.00
2012A 8mm Dovetail Pad . . . . . . . . . . . . . . . . . . . $2.00
2013A 8mm Dovetail Pad . . . . . . . . . . . . . . . . . . . $2.00
2013B 10mm Dovetail Pad . . . . . . . . . . . . . . . . . . $2.00
2013P 10mm Screw-On Pad . . . . . . . . . . . . . . . . $2.00
2015A 8mm Dovetail Pad Set. . . . . . . . . . . . . . . . $4.00
2015B 10mm Dovetail Pad Set. . . . . . . . . . . . . . . $4.00
2015P 10mm Screw-On Pad Set . . . . . . . . . . . . . $4.00
2017P Fiber Pad . . . . . . . . . . . . . . . . . . . . . . . . . . $4.00
2018P 10mm Dovetail Pad . . . . . . . . . . . . . . . . . . $2.00
2018S Vinyl Sleeve Set . . . . . . . . . . . . . . . . . . . . . $2.00
2029P Rubber Round Pad Set . . . . . . . . . . . . . . . $4.00
2034P Pad Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.00
3012A 8mm Dovetail Pad . . . . . . . . . . . . . . . . . . . $2.00
3013A 8mm Dovetail Pad . . . . . . . . . . . . . . . . . . . $2.00
3015A 8mm Dovetail Pad Set. . . . . . . . . . . . . . . . $4.00
5021P Mounted Pin Set . . . . . . . . . . . . . . . . . . . $12.00
5029P Rubber Pad Set . . . . . . . . . . . . . . . . . . . . . $6.00
Repair Tools & Kits
Stopflex
A.I.T. Industries
Midget Screw Extractor
6” Clear PD Rulers
Universal Nut Driver
Pick-Up Screwdriver 2.0mm Flat
Pick-Up Screwdriver 2.0mm Philips
Ball Tip Lens Curve Measure
Wide Throat Lens Thickness Caliper . . $299.95
Football Symmetrical HD™ Silicone
Nosepad Kit
Dynamic Labs, Inc.
Multi-purpose screwdriver, wrench
wrench rings with quality storage box.
and
The 16 piece set includes one swivel head
brass handle with 5 wrench rings, 2 flat screwdriver blades, 2 Phillips screwdriver blades
and 6 wrench tips.
Flat blades are 1.5 & 1.7mm Phillips Blades
are 1.7 & 1.5mm
Hex tips are 2.3mm, 2.5mm 2.0mm Star tips
are 2.2mm & 2.8mm Square tip is 2.2mm
Six new self aligning spring hinge screws with
fallout impeding coating. Coating is color
coated to aid in diameter identification.
Lengths vary from 2.5mm to 4.8mm and diameters from 1.2 to 1.6mm. Sold in lots x100.
80.025C 1.2mm x 2.5mm Gray coating
;80.030C 1.4mm x 3.0mm Blue coating;80.035C
1.4mm x 3.5mm Blue coating;80.040C 1.4mm
x 4.0mm Blue coating; 80.048C 1.4mm x
4.8mm Blue Coating; 80.050C 1.6mm x
3.56mm Black coating . . . . . . . . . . . . . . $25.00
Deburring Tool
Vigor Optical
Ring Scratchless drivers: 1.8mm Phillips,
1.8mm Flat, 3 hex wrenches: 2.0mm, 2.3mm,
and 2.5mm . . . . . . . . . . . . . . . . . . . . . . . . $40.00
Acetate Temple Tip Combo
Vigor Optical
HD™ nosepads are the longest lasting nosepads in the industry. Contains 25 pairs each
11mm snap in and screw in, 25 pairs each
Acetate Temple Ends for Metal Frames 150
17mm snap in and screw in; 25 pairs each
Pairs Combination Slimline & Paddle Ends
12mm “Mushroom”, and 100 screws
5 colors: Black, Brown, Crystal, Grey &
Tortoise • 6 core diameters: 1.0mm, 1.1mm,
Self-Aligning Spring Hinge Screw Kit 1.2mm, 1.3mm, 1.5mm,1.6mm • 2 lengths:,
65mm,& 70mm • 5 pairs of each size and color
Dynamic Labs, Inc.
Quick and easy removal of screw burs after
cutting. Recessed cutting surface, swivel
head, 4-1/4” handle, replaceable tips.
19.001. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.00
Dispensing Mirrors
Vigor Optical
The 8” diameter mirror flips from plano to 3X
magnification. The rugged metal construction
is plated either gold or nickel silver. The mirrors feature a low 13” profile with a heavy 8_
base to impede accidental tipping. Chrome $
Packed in a useful plastic box with chart for 46.00 and Gold $60.00.
easy replenishing. . . . . . . . . . . . . . . . . . . $75.00
Gold & Stainless Screw Assortment
B&L Style Twist Nose Pads
Vigor Optical
Vigor Optical
Contains 100 each of the following: Selfaligning Silver, Gold, 1.4mm x 4.3mm; Selfaligning Silver, Gold, 1.3mm x 4.3mm; Selfaligning Silver, Gold, 1.2mm x 3.5 mm; Hinge
Finder Silver, Gold, Gun Metal, 1.4mm x
19mm Crystal. Soft Silicone, clear centers. 5
6.4mm; Hinge Finder Silver, Gold, Gun Metal, pair package.
1.2mm x 6.4mm; 1200 total pieces!
87.6206/FR-6206 . . . . . . . . . . . . . . . . . . . . . . . . . . $5.00
Reduced Price!
A practical assortment of Gold and stainless
screws. 20 screws of each size and color with
nuts.
80.515. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $118.00
Reduced Price!
10/12/11 11:05 AM
FINISHING TOOLS
56
Lens Grip
Repair Tools & Kits
Vigor Optical
Gold Self-Tapping Screws
Vigor Optical
pads. Symmetrical shape eliminates the need
for rights and lefts.
87.0848 Push, 25 pr. . . . . . . . . . . . . . . . . . . . . . .
87.0848B Push, 50 pr. . . . . . . . . . . . . . . . . . . . . .
87.0848C Push, 100 pr. . . . . . . . . . . . . . . . . . . . .
87.0849 Screw base, 25 pr.. . . . . . . . . . . . . . . . .
87.0849Br. Screw base, 50 pr. . . . . . . . . . . . . . .
87.0849C Screw base, 100 pr. . . . . . . . . . . . . . .
Reduced Price!
$12.00
$21.00
$40.00
$12.00
$21.00
$40.00
Replacement Hinges
Vigor Optical
Phillips Head Screw Wheels
Gold self-tapping screw assortment for repair
and replacement of frame screws.
Accommodates most frames, color coded
Nylok coating for easy identification, four
diameter sizes, two head sizes, 50 screws per
selection. 11.5mm length.
82.500 Gold self-tapping screw kit . . . . . . . . . . $70.00
Vigor Optical
Lens washer for metal frames, comes in a
continuous roll with a prefixed adhesive on
both sides. Simply wrap around the lens, cut
to size, and insert the lens in the frame. Also
ideal as a filler when lenses are too small or
off-size. Ship wt. 6oz.
83.954. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.50
Reduced Price!
Reduced Price!
Heat Shrink Temple Tubing
Marking Die for Safety Lenses
Vigor Optical
Vigor Optical
Handy kit contains 60 pair of PVC tubing in
two convenient sizes, 4” x 3/16” and 4” x 1/8”.
Four colors: Gray, Black, Clear and Brown.
Packed in a handy organizer box. Refills available.
85.6500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $32.00
A quick, clean way to mark all plastic or polycarbonate lenses. Custom crafted fits your
Staking Set (SS-140A). Designed to be used
with a Nylon Anvil (SS-141/14). For use with a
high-base curved lens: order an extra anvil
and custom grind the base curve. Also suitable for temple marking.
Reduced Price!
44.153. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $100.00
Vigor’s new line of solderable replacement
hinges. Five pair packages of complete hinges with screws. Conventional : 82.H6430
6.4mm x 3.0mm; 82.H6435 6.4mm x 3.5mm;
82.H6440 6.4mm x 4.4mm; and 82.H6515
6.5mm 1.8mm. Spring Hinges: 82.HS6844
The 80.515P collection has uncoated screws. 6.8mm x 4.4mm and 82.HS4425 4.4mm x
The 80.515NP offers the same collection with
2.5mm. Also available in starter kit. $8.00 conNylok coated screws. Nylok adds a layer of
ventional and $20.00 spring hinges
protection against screw fallout and the
Saddle Straps
advantage of color coating for diameter recognition. 3oz. Original on many frames •
Vigor Optical
Covers complete necessary range • Value
combination • Easier to Insert • Variety for all
colors • Easy to use Wheel Dispenser •
Phillips Head • Gold & Stainless • 14 different
screws & nuts • 800 total pieces.
80.515P Non-coated screws. . . . . . . . . . . . . . . $120.00
Reduced Price!
Heat Shrink Tubing
New Pad Arm Kit 82.900
Vigor Optical
Vigor Optical
Plastic Frame Repair Pellets
Vigor Optical
All come ten pieces per package.
Excellent bonding power. Ideal when replacing hidden hinges where screw holes are
chipped out. Comes in handy dispenser tube
with enough pellets for hundreds of repairs.
54.888/FR-400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.00
Reduced Price!
PVC Screw and Snap Base Nose
Crystal Push Base
87-6106F 28.5mm . . . . . . . . . . . . . . . . . . . . . . . .
87-6127F 31.mm . . . . . . . . . . . . . . . . . . . . . . . . .
Crystal Screw Base
87-6193F 28.5 . . . . . . . . . . . . . . . . . . . . . . . . . . .
87-6194F 31.mm . . . . . . . . . . . . . . . . . . . . . . . . .
Reduced Price!
$17.75
$17.75
$17.75
$17.75
Scratchless Screwdriver & Wrench
Kit
Vigor Optical
Pads
Vigor Optical
60 pairs of nose pad guard arms in a handy
For repair of clip-on sunglass clips. Comes in box. 40 pairs of screw and push base for solBlack (85.7501) and Clear (85.7507). Shrinks dering on metal frames and 20 pairs of screw
approximately 50%. 2.35mm x 4 inch pieces. and bush base for plastic frame insertion. . .
85.7501 Black, pkg of 10 . . . . . . . . . . . . . . . . . . . $4.50
$48.00
85.7507 Clear, pkg of 10 . . . . . . . . . . . . . . . . . . . . $4.50
Nickel Foreign Screw Assortment
85.8507 Clear, pkg of 10 . . . . . . . . . . . . . . . . . . . . $4.50
Vigor Optical
Secure Protection Plus; Avoid costly scratches; Tighten & adjust with confidence
Reduced Price!
HINGES FOR PLASTIC FRAMES
Vigor Optical
New from Vigor Optical is a line of round and
“D” shaped PVC nose pads. Available in 9mm
round , 12mm and 16mm “D” shape. Screw
and Push on Bases. Pads are available in
packages of x25, x 50 and x100 for the best
value. Packs x25 $ 10.00 per pack, packs x50
are $16.00 per pack and packs x100 are
Versatile combination of pad screws, 566L,
$22.00 per pack.
706L, and oversized and trim screws with
metric threads to fit foreign frames. 1,100 Contact Vigor Optical for current pricing.
screws
Replacement Hinge Kit
80.100/SC100 . . . . . . . . . . . . . . . . . . . . . . . . . . $100.00
Reduced Price!
Hinges are sold in 5 pair packages with
screws. Lead Free NS (CuNi 18Zn20).
Vigor Optical
Set of 5 : Three wrenches: 2.0mm, 2.2mm,
&2.5mm• Two screwdrivers: Phillips & Flat
;Standard easy grip handle. Save one
scratched preminum lens and set pay for
itself.
52.7205. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $80.00
Screw Assortment for Domestic
Frames
Vigor Optical
Nosepads
Vigor Optical
.82.HP6735 Plastic Frame Hinge 6.7mm x
3.5mm
82.HP6446 Plastic Frame Hinge 6.4mm x
4.6mm
6.0mm
30 pairs of hinges packed in an easy to use
box. 4 sizes solder nickel silver hinges and 2
4.0mm
For repair and replacement of nosepads. sizes nickel silve spring hinges. 5 pairs of
per 5 pair pack . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00 16mm soft silicone push and screw base nose each size . . . . . . . . . . . . . . . . . . . . . . . . . $60.00
1,000 screws and 200 nuts in a 12-compartment dispensing box.
81.701. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $96.00
Reduced Price!
10/12/11 11:06 AM
FINISHING TOOLS
Repair Tools & Kits
Student Kit
All Clear Silicone Nose Pads
Memory capacity unlimited
Vigor Optical
Western Optical
Touchscreen color monitor
57
Self Tapping Screw Kit 82.910
OperaScan
Vigor Optical
A.I.T. Industries
Includes the most popular adjusting tools
packed in a handy case (PK-24). Contains one
each: PL-5775 Bracing Pliers, PL-265 Wide
Jaw Angling Pliers, PL-1300 Chappel Cutting
Pliers, PL-47 Flat/Round Nose Pliers, PL-768
New revised screw wheel for 9mm self tapLens Axis Pliers, PL-5N Numont Pliers,
ping screws. All screws are color coded for PL-1601 Adjusting Pliers, PL-29 Chain Nose
easy identification. 400 total screws of 8 dif- Pliers, GA-308 Nylon Tip Gauge, GA-198 6”
ferent diameters/ head sizes. . . . . . . . . . $76.00 PD Ruler, GA-760 Lens Measure, TW-337
Screw
Holding
Tweezers,
SD-880K
Self-Tapping Screws
Screwdriver Kit, FI-2000 Zyl File, FI-240C
Screw Finishing File, FI-113T/4 4-Screw Head
Vigor Optical
File, SD-750 Hexagon Wrenches, BK-96
Grobet-Vigor Tool Catalog.
15.153/PK-24 Case only, Ship wt. 1lb. . . . . . . . . $36.00
89.544/PK-44 Complete Kit, Ship wt. 12lb. . . . $625.00
Reduced Price!
Work Station
Packaged 10 pairs per pack.
13mm Symmetrical
2270/10 Screw Post . . . . . . . . . . . . . . . . . . . . . . .
2275/10 Push-In . . . . . . . . . . . . . . . . . . . . . . . . . .
15mm “D” style
2248/10 Screw Post . . . . . . . . . . . . . . . . . . . . . . .
2258/10 Push-In . . . . . . . . . . . . . . . . . . . . . . . . . .
15mm Symmetrical
2272/10 Screw Post . . . . . . . . . . . . . . . . . . . . . . .
2277/10 Push-In . . . . . . . . . . . . . . . . . . . . . . . . . .
17mm “D” style
2250/10 Screw Post . . . . . . . . . . . . . . . . . . . . . . .
2260/10 Push-In . . . . . . . . . . . . . . . . . . . . . . . . . .
17mm Symmetrical
2274/10 Screw Post . . . . . . . . . . . . . . . . . . . . . . .
2279/10 Push-In . . . . . . . . . . . . . . . . . . . . . . . . . .
19mm “D” style
2255/10 Screw Post . . . . . . . . . . . . . . . . . . . . . . .
2265/10 Push-In . . . . . . . . . . . . . . . . . . . . . . . . . .
9mm Button Style
2243/10 Slide-In . . . . . . . . . . . . . . . . . . . . . . . . . .
2245/10 Push-In . . . . . . . . . . . . . . . . . . . . . . . . . .
2247/10 Screw Post . . . . . . . . . . . . . . . . . . . . . . .
$2.99
$2.99
$2.99
$2.99
$2.99
$2.99
$2.99
$2.99
Complimentary scanner to the CNC Opera
Drill to make programming easy and accurate.
Embedded Windows XP Operating System
$2.99
$2.99
Color Touch Screen Monitor.
$2.99
$2.99
Zoom and edit functions to modify and refine
hole sizes.
$2.99
$2.99
$2.99
Recognizes axis of demo lenses automatically.
Vigor Optical
Rimless Mounting Tools
Opera Drill
A.I.T. Industries
Self-tapping screws available in packs of 100
OMA Compliant scanner which can automatically recognize drill point coordinates, shape
and contour of demo lenses and patterns.
Ability to customize shapes by changing circumference, horizontal or vertical measurements.
AIRLOCK BUSHINGS
Vigor Optical
per size. SC402 small head, 1.3mm dia.;
SC403 small head, 1.4mm dia.; SC404 small
head, 1.5mm dia.; SC405 large head, 1.3mm
dia.; SC407 large head, 1.5mm dia.; SC408
large head, 1.6mm dia. Diameters are color- Completely stocked supply station. Ideal for
new office finishing room. Contains complete
coded for easy selection.
assortment of screws, nose pads, pad arms,
82.400. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $60.00
temple ends, lens washer, screwdriver and
Reduced Price!
wrench, taps and drills. Specs: 10lb.
A.I.T.’s new Opera Drill, a numerical control
device with an abundance of features for drilling Plastic, Poly and Hi-Index lenses mounted
Vigor Optical
4108 Lens Interliner
to rimless frames. The Opera Drill is a standalone automated drill that provides CNC preWestern Optical
cision without complex software. Perfect for
wholesale lab environments as well as medium-sized labs, the Opera Drill meets the
needs of all labs requiring high levels of quality and productivity at an affordable price.
Opera Drill features an LCD screen to enter,
present and display data, fully automated lens
detection mechanism, 3 dimensional operations - a feature offered exclusively by A.I.T.,
total manual axis control for special or handcrafted jobs, pattern memorization for jobs
An assortment of 20 per type of rimless
with identical or similar characteristics and full
screws with assembly. Zlock, Rayban screws Available in reels of light gauge zyl to fil in integration with existing A.I.T. patternless sysminor gaps between the lens and the eyewire tems with the CNC Opera Drill. A.I.T. offers a
and nuts.
and protect delicate lens edges. Lens inter- comprehensive solution for optical labs with
81.516. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $94.00
liner regular: Gauge 0.25mm, 150’ long.
minimal investment and maximum quality.
Specialty Screw Kit
Reduced Price!
89.5300. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $785.00
Reduced Price!
4108 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.00
Staking Set
4110 Screw Loosening Fluid
Operascan
Vigor Optical
Western Optical
A.I.T. Industries
Single tube. Nylon. 2.2mmm X 7.5mm packaged x100 . . . . . . . . . . . . . . . . . . . . . . . . $22.00
Awl with Double-Ended Tip
Vigor Optical
Double-ended awl blade fits regular screwdriver handle. Comfortable and easy to use.
Digs deep into grooves to clean out old liner
and rimless cord. Useful to remove beads
from grooves on zyl. Aligns barrels for screw
insertion. 4.5”. 2oz.
52.536 Replacement tips (3/pkg) . . . . . . . . . . . . $16.00
Complete stand alone CNC drill plus drill point 52.537 Complete awl. . . . . . . . . . . . . . . . . . . . . . $12.00
recognition system
Deburrer
Adapts to all the most popular blocking systems
Vigor Optical
CNC Drill utilizes a touch probe to measure
base curve and detect the lens edge
Automatic calculation of any angles from 0 40 degrees of inclination
Got a screw set in so tightly that you are afraid
Staking Set: Self-raising arm makes working that any more pressure will strip the screw
on hinges, temple fronts and shields more driver slot and create more problems? Try a
accurate than pliers. Set includes 19 punches drop of this specially formulated screw loosening fluid. The fluid is designed to flow
and dyes along with arbor press.
between the threads to make it easier to break
44.100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $250 the bonds. 6cc applicator.
Reduced Price!
4110 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.00
Up to 10 operations per lens: drilling, slotting
and blind holes
Interior filing surface removes excess metal
Automatic recognition of drill and slot coordiafter screw cutting. Hand held with swivel
nates as well as an exact scale representation
head. 4 3/8_ long.
of lens shape without the need of measure19.001
ment
Deburrer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.00
Function for editing and modification of holes 19.002
prior to drilling and edging
Replacement tips, 3 per pkg . . . . . . . . . . . . . . . $14.50
10/12/11 11:06 AM
58
FINISHING TOOLS
Lens Screw Bracing Pliers
Rimless Cord
Vigor Optical
Vigor Optical
RIMLESS NUT & BUSHING WHEEL
81.703
Vigor Optical
Diamond Bevel Ease
Vigor Optical
The unique design of the grooved nylon jaw
and the slotted metal jaw will grasp a nut and
hold it firmly during drill mount rimless adjustments. Will make 3 piece rimless adjustments
Bevel Ease chamfers and stress relieves
easy and protects the lens during adjustrough holes in drill mount lenses. Diamond bit ments. The special bracing jaws will hold
for a smooth, high-end finish.
mounting pieces stationary to prevent the lens
11.132. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.00 from cracking. 1oz.
19.003. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $24.00
End Caps
46.700. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
Spool contains 50 ft. of Crystal-colored cord. Vigor Optical has expanded their collection of
rimless assembly and repair hardware.
Ship wt. 6oz.
Available for immediate shipment is a new
83.207. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.00 rimless accessory wheel SKU 81.703 with 962
useful bits and pieces for $70.00. The wheel
Reduced Price!
contains 2 sizes: 1.4 & 1.2mm Cap Nuts, Hex
Rimless Cord Stringing Tool
nuts, Star Nuts 1.4mm Metal Washers,
Silhouette style Bushings, 2 sizes: 1.2 &
Vigor Optical
1.4mm End Caps, 2 sizes: 1.2 & 1.4mm Top
Hats, and 1.4mm Nylon Washers. . . . . . $70.00
Scratchless Flat Screwdriver
Reduced Price!
Vigor Optical
Nylon Cap Lock Nuts
Vigor Optical
Vigor Optical
Permits easy insertion of lenses into all semi- Avoid costly mistaken whenassemblying or
tightening screw mounted rimless lenses.
rimless frames, eliminating the need for a roll Scratchless flat screwdriver features a 2.2 flat
of ribbon. Simply hook the end of this tool to screwdriver blade nestled within a protective
nylon sleeve. Slippage skates across a lens
the hinge side of the nylon band and slowly surface without a care.
Cone shaped nylon end caps for rimless lens
Cap Lock Nuts are a classy finish for mount- pull across edge of lens.
Mounted in a conventional knurled handle.
screws. 2.5mm outer diameter, 1.4mm inner ing drilled lenses. Grobet Vigor has extended 44.610. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.00 52.456. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.50
diameter and 3.5mm high. Packed x100$10.00 their cap lock nut choices with the NEW 44.612
Scriber with Knurled Chuck
NYLON CLEAR CAPS. Avoid corrosion and Pack of 3 replacement hooks. . . . . . . . . . . . . . . . $2.75
Vigor Optical
Ergo Compression Closing Pliers
extensive gold and silver inventory for half the
Rimless Disassembly Plier
46.702E
cost of conventional metal caps. Choose the
new 80.422C from Grobet. New 1.4mm CLEAR
Vigor Optical
Vigor Optical
CAP NUTS are packaged 100 per vial and
offer both saving and convenience. 1oz.
Knurled chuck holds the point in either the
80.422C 1.4mm diameter . . . . . . . . . . . . . . . . . . $18.00
open position or reversed within the steel
body so that it can be carried safely in a
pocket. Hexagonal head prevents rolling on
bench and knurled body provides secure gripping. Nickel-plated. 1_4” handle diameter,
23_8” blade length
Reduced Price!
Rimless Bushing Puller
Vigor Optical
52.965. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $26..00
Silhouette / Safilo Style Bushing
Ergonomic off set handle on the compression
Rimless Disassembly Pliers for use on
bushing closure & bracing pliers. The offset
Silhouette and Safilo style 3 piece mountings
special handle allows for superior leverage.
with double pins. Non-marking plastic jaws
Closure bushing nestle securely into the
ensure no damage will be done to frames or
grooved nylon jaws for controlled compres-
lenses.
sion. 8mm nylon jaws protects lenses during Useful for extra leverage when removing old 46.710. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
closure and bracing. A must for successful bushings on Silhouette and Safilo style 3
Rimless Mounting Washers
adjusting of compression frames. Use as a piece pressure mountings.
bracer. . . . . . . . . . . . . . . . . . . . . . . . . . . . $25.00
Figure 8 Rimless Cord
Vigor Optical
46.712. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
Vigor Optical
Vigor Optical
Pressure Mount Bushings for Silhouette and
Safilo style 3 piece mountings. Will work on
frames manufactured by both companies.
81.175 pkg. of 20. . . . . . . . . . . . . . . . . . . . . . . . . $16.00
81.175k pkg og 1000. . . . . . . . . . . . . . . . . . . . . $130.00
Rimless Bushing Trimmer
Silhouette Style Compression
Bushing Closing Pliers
Vigor Optical
Vigor Optical
Vigor Optical has added an enhanced line of
washers for rimless mounting. 8 diameters of
nylon washers from 1.1mm to 1.9mm and 2
Useful for close trimming of Silhouette and
Replacement upper cord for rimless frames. Safilo style compression bushings. Highly styles of metal, either gold or silver, 1.25mm
Easily clamps pressure-mount rimless bushLength 1 meter. Ship wt. 4oz.
polished edge will not scratch lens. Not to be All washers are packed 100 per pack. Prices ings.
vary call for exact quote.
83.098. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.00 used to cut metals!
Closure bushings securely nestle in horizontal
grooves.8mm nylon jaws protects lenses dur46.711. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00 Contact Vigor Optical for current pricing.
Reduced Price!
10/12/11 11:06 AM
FINISHING TOOLS
ing closure. Also useful for bracing during
adjusting to avoid lens loosening,
46.702. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
46.702J
Jaws w/screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 5.00
1027F Guild Narrow Flush End Cut
5mm Plier
Western Optical
thick lenses.
Sparkle with Crystals 81.500
Compression/Bracing Plier
Vigor Optical
Western Optical
Swarovski® crystal rhinestones from vigor
Optical can be useful for replacement stones
or for custom design. The 72 Swarovski foilbacked crystals are packed in a handy starter
kit with 6 sizes of cutting burs. The collection
offers 12 crystals of each sizes ranging from 1027F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $29.00
1.00mm to 2.25mm. Simply use 2-part epoxy 1027F Narrow End Flush Cutting Plier
or Vigor Jeweler’s Epoxy (12.0451) to adhere
Western Optical
these to metal, glass, plastic or whatever. . .
$42.00
Vigor Rimless Adjustables
Vigor Optical
2034V Screwless Rimless
1050F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $33.00
1050V Guild Screwless Rimless
59
Western Optical
Laboratory grade plier for assembling, tightening and bracing compression rimless.
Stationary Delrin jaws are dual grooved to
cradle the metal and plastic components on
both the horizontal and vertical axis, minimizing the risk of scratching the lens. Finger
bracing handle is designed for heavy squeezing without slipping. Handles are also non-slip
coated with spring-open jaws.
This is the master plier for the new generation
of screwless rimless compression frames, for
assembling, tightening and bracing. Opposing
Delrin jaws are dual grooved to cradle the
metal and plastic components on both the
2034V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $39.00
horizontal and vertical axis, minimizing the 2034V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $39.00
risk of slipping and scratching the lens. One
2085 Rimless Tube Refresher
jaw pivots to compensate for base curve so
Western Optical
the trim and rubing compress in unison.
Opens super wide for really thick lenses.
Comfortable for any size hand while providing
extra compressing power. Hand-conforming
grip for extra comfort, non-slip handles and
spring-open jaws.
1050V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $32.00
1050V The Maestro Screwless
Cutting the excess length from rimless compression tubing is easy and safe with the 5mm
wide head. Rounded jaws prevent scratching
the lens. Not recommended for use on metals.
Rimless Compressing/Bracing Plier
Western Optical
1027F Foam Grip. . . . . . . . . . . . . . . . . . . . . . . . . $29.00
Zyl Lens Washers
1027V Guild Narrow Flush End Cut
5mm Plier
Vigor Optical
Western Optical
46.800 Numont Pliers . . . . . . . . . . . . . . . . . . . . . $20.00
A handy tool for opening the compression
rimless tube to make inserting the post easier.
The squeezing action of tube cutters slightly
collapse the end of the the tube making it difficult to get posts into position prior to compressing. Inserting the metal point of the tube
refresher into the tubing re-establishes the
proper inside dimensions. 3-1/2” long.
2085 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $17.00
2086 Lens Harpoon
Western Optical
The interliner comes on a round clear plastic
plier. Cutting the excess from screwless rimspool and unwinds as required.
less compression tubing is easy and safe with
83.950 Regular #50 . . . . . . . . . . . . . . . . . . . . . . . . $6.75
83.950H Extra Heavy #50H . . . . . . . . . . . . . . . . . . $7.25
Reduced Price!
1016V Guild Rimless Bracing Plier
Western Optical
1027V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $28.00
1050F Guild Screwless Rimless
Compression/Bracing Plier
scratching the lens. One jaw pivots to compensate for base curve so the post and tubing
thick lenses.
Diamond tipped conical point inserts into any
1050V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $32.00
standard screwdriver handle. Use when
1050V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $32.00
deburring, smoothing or tapering a hole in
rimless mounted lenses to prevent chipping.
2020V Rimless Post Puller Plier
Handle not included.
Western Optical
3027V Rimless Tube Stripper
Western Optical
At last the dispenser can fearlessly adjust a
drilled rimless mounting wihtout cracking or
breaking the lens! The exclusive Western
dovetail Delrin padded jaw has a channel that
holds the screw head without scratching the
lens. The slotted metal jaw securely grips the
glass screw at the retaining nut. With the
mounting held firmly you can safely adjust the
end piece, the temple, or the bridge. Handconforming grip for extra comfort, non-slip
1016V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $32.00
1016V Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . $32.00
Western Optical
The Post Puller safely disengages the bridge
and temple from compression rimless lenses.
Prevents lens breakage that often results from
the attempt to extract the post and tubing by
hand. A practical solution to a costly problem.
scratching the lens. One jaw pivots to com- 2020V Vinyl Group . . . . . . . . . . . . . . . . . . . . . . . . $27.00
pensate for base curve so the post and tubing 2020V Vinyl Group . . . . . . . . . . . . . . . . . . . . . . . . $27.00
2086 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $31.00
Effortlessly remove compressed tubing from
compression posts on rimless frames. Cutting
blade gap is adjustable so you cut through the
tube without biting into the metal post. Slot in
jaw aids in removing cut tube from post.
3027V
Vinyl Grip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
10/12/11 11:06 AM
60
FINISHING TOOLS
Economy Screwdriver & Hex Wrench
Set
Vigor Optical
5021S Post Pushing Plier
drop and get lost. Chrome top and handle. 2046 Driveshaft Drivers Set (8 Drivers)
52.850–2mm flat blade; SD 748–2mm Phillips
Western Optical
blade; SD 749–1mm flat blade. Great for nose
pad screws. Shipping weight 3oz. 52.740
Combination of three.
52.748. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $32.00
52.749. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $32.00
52.850. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $32.00
Reduced Price!
Western Optical
Replacement Screwdriver Blades
Vigor Optical
One Spring clip handle for use with double
ended screwdriver blades Blades:1.6mm x
2.5mm flat Wrenches: 2.0mm 1.6mm x 2.0mm
Extracting the post and tubing from a comPhillips 2.3mm 1.6mm x 1.6mm Flat 2.5mm
pression rimless lens presents many hurdles.
2.0mm x 2.0mm Flat 2.6mm 2.0mm x 2.0mm
To remove the fixture from the hole requires
Flat/ Phillips “T”. . . . . . . . . . . . . . . . . . . . $35.00
great force gently and accurately applied to
Grobet Grippers
this fragile area. Western’s solution is to engineer a new concept in pliers. The Post Pusher
Vigor Optical
combines tremendous pressure delicately and
effortlessly applied to gently push the post
and tubing from the holes. Pins pivot easily to
accommodate horizontal and vertical mounting systems. Specs: 7-1/2” long.
5021S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $43.00
5021S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $43.00
Comfortable and attractive with contemporary
lines. Injection molded of super sturdy nonwearing nylon. The hardened German steel
blades are securely held in place by a steel
snap ring and are easily replaceable. Set of
Eight
includes:
Driveshaft
Standard
Screwdriver;
Driveshaft
Phillips/Flat;
Driveshaft Screw Extractor; Driveshaft Fine
Flat Tip; Driveshaft Standard Hex Nut Driver;
Vigor offers a large selection of screwdriver
Driveshaft Phillips Driver; Driveshaft Star Nut
blades for all handles requiring the “ double Small (2.2mm) Driver; Driveshaft Star Nut
end” style. All blades are packed 3 per pack- Large (2.8mm) Driver.
age.
2046 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $45.00
2046PF Driveshaft Drivers
Scratchless Screwdriver
Western Optical
Vigor Optical
Screwdrivers
Basic Flat/Flat 1.5mm/2.2mm SD
(Green)
Vigor Optical
Cushioned grip for screwdrivers. Three colors,
shrinks to fit most screwdrivers, cuts easily,
reheat to reshape after extended use. Sold in
5 piece packs per color. Available in Blue, Red
and Yellow. 10.5mm diameter.
52.449R-Red, 52.449Y-Yellow. . . . . . . . . . . . . . . . $8.00
Reduced Price!
Optician’s Screwdrivers
Basic optical SD without clip. Blades are held
in via spring. 4.5”. 1oz.
Features plastic-coated blades to protect
lenses and frames when assembling rimless
and faceted. Replacement blades SD 775/7
are available.
52.456. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.50
Reduced Price!
Let your patients see that you use specialized
tools to care for their spectacles, including the
screwdriver and blades. The attractive design
of Western’s Driveshaft Drivers enhances your
credibility as an eyecare professional. The
hardened German steel blades are securely
held in place by a steel snap ring. Blades
won’t slip out, yet are easily replaceable.
Screw Extractor
Vigor Optical
Vigor Optical
52.775. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.00
Brass Screwdriver Kit
Vigor Optical
Removes corroded, worn or broken screws
from zyl or metal frames.
Brass Screwdriver Kit
Packed in a storage tray. Contains: large-head
brass screwdriver with two blades (SD-880),
double-ended flat blade, 1mm, 1/2 mm both
sides, scratchless blade, set of three extractor
blades-2mm, 1.5mm, 1.25mm, set of five,
deep barrel wrench tips, Ship wt. 10oz.
52.450 Regular Optician’s Screwdriver . . . . . . . $10.00
52.457/SD778 Phillips/Flat double blade combo $14.50
52.850 Pick Up Screwdriver . . . . . . . . . . . . . . . . $32.00
52.856 Perfect screwdriver with two flat blades $38.00
52.857 Brass large head double blade with Phillips . . .
$27.25
Reduced Price!
Perfect Screwdriver
Vigor Optical
52.858. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $77.00
Reduced Price!
52.470 Set of 3 . . . . . . . . . . . . . . . . . . . . . . . . . . $24.00
52.471 Small . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.00
52.472 Medium . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.00
52.473 Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.00
Replacement blades:
52.474 Small . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.00
52.475 Medium . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.00
52.476 Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.00
Reduced Price!
2046 Driveshaft Set 8 Listed. . . . . . . . . . . . . . . . $45.00
2046FT Driveshaft Fine Flat Tip . . . . . . . . . . . . . . $5.50
2046H Driveshaft Standard Hex Nut Driver . . . . . $5.50
2046P Driveshaft Phillips Driver . . . . . . . . . . . . . . $6.00
2046PF Driveshaft Philips/Flat . . . . . . . . . . . . . . . $5.50
2046SE Driveshaft Screw Extractor . . . . . . . . . . . $5.50
2046SNL Driveshaft Star Nut Large (2.8mm) Driver . . .
$7.00
2046SNS Driveshaft Star Nut Small (2.2mm). . . . $7.00
2048 Driveshaft Standard . . . . . . . . . . . . . . . . . . . $5.00
2049 Driveshaft Handle. . . . . . . . . . . . . . . . . . . . . $2.25
2049 Ring Replacement Snap Ring . . . . . . . . . . . $0.20
2047 Get-A-Grip Driver Cushions
Western Optical
Set of 3 Pick-Up Screwdrivers with
Blades
Vigor Optical
Disposable Screwdriver Set
Vigor Optical
Relieve the stress on your fingers by getting a
more comfortable and, therefore, a firmer grip
on your driver. Multiple colors for fast tool
identification. Set of five cushions includes
Black (2), Blue (1), Yellow (1), Red (1). Drivers
not included.
Top of the line, ball bearing screwdriver.
Complete with two single end blades, one
2047 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3.50
each wide and narrow, 5-7/8” (14.9cm). 3oz. Set of 3 pick up screwdrivers for all needs. No
2048 The Driveshaft Screwdriver
Set of three disposable Phillips head screw- (84g).
more fumbling to hold tiny screws.
52.856. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $38.00
drivers. Sizes: 1.2mm, 1.5mm and 2.0mm.
Western Optical
Jaws automatically adjust by spring tension.
52.574/SD 719 Set of 3 . . . . . . . . . . . . . . . . . . . . $24.00 Reduced Price!
Holds
screws
securely
while
removing
or
Pick-Up
Screwdrivers
Double-Ended Phillips Screwdriver
inserting, so that they will not drop and get
Vigor Optical
Vigor Optical
lost. Chrome top and handle. Set of three has
52.850 Flat blade 2.5mm, 52.748 2.2mm phillips blade and 52.749 special nose pad screw
blade 1.0mm.
Screwdriver with double Phillips blade. One Pick-up screwdrivers in three styles for all
your needs. Jaws automatically adjust by
end a 2mm, the other a 1.5mm.
52.462. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $13.50 spring tension. Holds screws securely while
Reduced Price!
removing or inserting, so that they will not
52.740
for the complete set. . . . . . . . . . . . . . . . . . . . . .
52.748. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
52.749
special Nose pad driver . . . . . . . . . . . . . . . . . . .
52.850
individual drivers . . . . . . . . . . . . . . . . . . . . . . . . .
$72.00
$32.00
$32.00
$32.00
Comfortable and attractive. Non-wearing
nylon prevents the rotating cap from binding.
The reversible flat double sided blade is held
in place by a steel snap ring. 4-1/4” long. US
Patent #D326,213.
2048 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.00
10/12/11 11:06 AM
FINISHING TOOLS
Screwdrivers
2050 The Stealth Driver
Western Optical
The most comfortable driver ever! The head
swivels and pivots to always fit securely in the
palm of your hand. Ergonomic design eliminates wrist and elbow fatigue. Blade is held in
place with a magnet for easy switching. Steel
and brass construction. Uses all Western
replacement driver blades. 4-5/8” long. US
Patent #6,145,982.
2050 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $24.00
2051 Spring Clamp Screwdrivers
2092/10 Phillips Sm/Med Blade, pkg. 10. . . . . . $36.50
2092/3 Phillips Sm/Med Blade, pkg. 3. . . . . . . . $11.00
2093/3 Screw Extractor Sm/Med, pkg. 3. . . . . . $10.00
2094 Standard nut wrench tip . . . . . . . . . . . . . . . $3.50
2095/3 Phillips/Flat Blade, pkg. 3. . . . . . . . . . . . $10.00
2096 Star Nut Small (2.2mm) Wrench Tip . . . . . . $4.50
2097 Star Nut Large (2.8mm) Wrench Tip . . . . . . $4.50
Screwdriver
“Propane and Butane Soldering”
63.1511DVD
Vigor Optical
2305 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.50
5050 Stiletto Power Driver
Western Optical
The Stiletto’s stationary cap rotates on ball
bearings yielding a smooth comfortable feel.
Uses standard screwdriver and nut driver
blades. A high power magnet holds the blade
in place securely. It’s easy and quick to
exchange blades. One blade inventory now
works for all your drivers. No allen wrench or
A tremendous time saver. As you are unscrewspecial driver blades required. Specs: 3-3/4”
ing, reach in and hold the screw securely. Stop
Long
searching for lost screws. Comes in three
5050 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $24.00
blade configurations.
5060 Le Forque Driver Set
Western Optical
2057 Pocket Clip Driveshaft Drivers
Western Optical
The ever popular Driveshaft Driver just got
better. Now available with a handy pocket clip
so you can comfortably carry your driver with
you. Injection molded of super sturdy nonwearing nylon. The rotating cap will not bind.
The hardened German steel blade is securely Step by step DVD instruction on gas solderheld in place by a steel snap ring. 4-1/4” long. ing. Demostration includes both propane and
US Patent #D326,213.
butane gas. 20 minutes. . . . . . . . . . . . . . $25.00
2058 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.50
TruBlue Aluminum Driveshaft Driver
Electric Soldering Made Easy
Set (8 Drivers)
63.1512DVD
Western Optical
Vigor Optical
The industry standard driver with an attractive
blue protective finish. Indestructable, comfortable and attractive. Rotating cap has flat
spot to prevent the driver from rolling. The
hardened steel blades are securely held in
place by a steel snap ring and are easily
replaceable. Pure driver satisfaction…in the
palm of your hand. Complete set of eight drivers includes: Pocket Clip Driveshaft Standard
Screwdriver; Pocket Clip Driveshaft Phillips/
Flat; Pocket Clip Driveshaft Screw Extractor;
Pocket Clip Driveshaft Fine Flat Tip; Pocket
Clip Driveshaft Standard Hex Nut Driver;
Pocket Clip Driveshaft Phillips Driver; Pocket
Clip Driveshaft Star Nut Small (2.2mm) Driver;
Pocket Clip Driveshaft Star Nut Large (2.8mm)
Driver.
“Le Forque” Driver stores its own supply of
blades in the handle and delivers a tremendous amount of torque. Easy to grip heavyduty body with removable ball bearing cap. A
magnet holds blades in place making a quick
blade change easy. Four standard Western 2301 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $61.00
This useful design allows you to keep track of blades included: Flat/Flat (2), Phillips and Fine
TruBlue Aluminum Driveshaft Drivers
your driver by comfortably carrying it with Tip. 5” long.
you. Injection molded of super sturdy non- 5060 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $32.00
Western Optical
wearing nylon with rotation cap. The removable hardened German steel blade is securely Pocket Clip Driveshaft Set (8 Drivers)
held in place by a steel snap ring. Us Patent
Western Optical
#D326,213.
2049Ring Replacement Snap Ring . . . . . . . . . . . $0.20
2057 Pocket Clip Driveshaft Handle . . . . . . . . . . $3.00
2058 Pocket Clip Driveshaft Standard Screwdriver . . .
$5.50
2059 Pocket Clip Driveshaft Set (8 drivers listed) . . . . .
$49.00
2059FT Pocket Clip Driveshaft Fine Flat Tip . . . . $6.00
2059H PC Driveshaft Standard Hex Nut . . . . . . . $6.00
2059P Pocket Clip Driveshaft Phillips . . . . . . . . . $6.50
2059PF Pocket Clip Driveshaft Phillips/Flat . . . . $6.00
2059SE Pocket Clip Driveshaft Screw Extractor. $6.00
2059SNL PC Driveshaft Star Nut Large (2.8mm). $7.25
2059SNS PC Driveshaft Star Nut Small (2.2mm). $7.25
2090/10 Driver Blades
Western Optical
2090/10 Std/Narrow Driver Blade, pkg. 10 . . . . $30.00
2090/3 Std/Narrow Driver Blade, pkg. 3 . . . . . . . $9.00
2091/3 Fine Flat Tip Blade, pkg. 3 . . . . . . . . . . . $10.00
Step by step DVD instruction on electric soldering. Demostration uses vigor electric welding machine . 20 minute demostration.
Soldering Station
Vigor Optical
Used for frame repair. Large working surface
will accommodate 6 x 12 soldering board, two
clip sizes to fit different size frames, 2” 3.1/2x
magnifier and a rubber gasket to prevent slipping. 9-1/2” x 12” metal base.
54.025. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $90.00
Reduced Price!
Soldering Torch Holder
The attractive design of Western’s Pocket Clip
Driveshaft Driver allows you to keep track of
your driver by comfortably carrying it with
you. Injection molded of super sturdy nonwearing nylon. The hardened German steel
blades are securely held in place by a steel
snap ring and are easily replaceable. Set of
Eight includes: Pocket Clip Driveshaft
Standard Screwdriver; Pocket Clip Driveshaft
Phillips/Flat; Pocket Clip Driveshaft Screw
Extractor; Pocket Clip Driveshaft Fine Flat Tip;
Pocket Clip Driveshaft Standard Hex Nut
Driver; Pocket Clip Driveshaft Phillips Driver;
Pocket Clip Driveshaft Star Nut Small (2.2mm)
Driver; Pocket Clip Driveshaft Star Nut Large
(2.8mm) Driver.
2059 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $49.00
Soldering Accessories
Western Optical
Western Optical
Western Optical
2051 Fine Tip Clamp Screwdriver . . . . . . . . . . . $20.00
2051B Replacement blade . . . . . . . . . . . . . . . . . . $7.00
2052 Standard Spring Clamp Screwdriver. . . . . $20.00
2053 Phillips Spring Clamp Screwdriver . . . . . . $20.00
The Pocket Clip Driveshaft
2305 TruBlue Aluminum Driver Handle
Indestructible and comfortable. The industry’s
standard driver with a new attractive blue
protective finish. Rotating cap has flat spot to
prevent the driver from rolling. The blade is
held in place by a steel snap ring. 4-1/4” long.
61
Vigor Optical
The industry standard driver with an attractive
blue protective finish. Indestructible, comfortable and attractive. Rotating cap has flat spot
to prevent the driver from rolling. The reversible flat double-sided blade is held in place by
a steel snap ring.
2300 TruBlue Driveshaft Standard Screwdriver. . $7.25
2300FT TruBlue Driveshaft Fine Flat Tip . . . . . . . $7.75
2300H TruBlue Driveshaft Standard Hex Nut Driver . . .
$7.75
2300P TruBlue Driveshaft Phillips Driver . . . . . . . $8.00
2300PF TruBlue Driveshaft Phillips/Flat. . . . . . . . $7.75
2300SE TruBlue Driveshaft Screw Extractor . . . . $7.75
2300SNL TruBlue Driveshaft Star Nut Large (2.8mm)
Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.75
2300SNS TruBlue Driveshaft Star Nut Small (2.2mm)
Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.75
2301 TruBlue Driver Set (8 drivers listed). . . . . . $61.00
2305 TruBlue Driveshaft Handle . . . . . . . . . . . . . . $4.50
Magnetic holder for the Little Torch. Use it
right on the stand when you need both hands
free. Heavy metal base keeps holder safely.
1lb.
14.058. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $64.00
10/12/11 11:06 AM
FINISHING TOOLS
62
Soldering Equipment
Butane Soldering Torch
Vigor Optical
Soldering Materials
slots and 10.5mm vertical slot accomodates Also available in 1/2-gallon size with timer.
various screw lengths and holds screw shank 18500-115V, 209400 220V.
securely. Length: 6-1/4”.
Titanium Brazing Kit
57.732. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12.00
Reduced Price!
Dynamic Labs, Inc.
Screw Holding Tweezers
20/20 Cleaner
BPI
Vigor Optical
Screw holding tweezers allow easy insertion
of screws in tight areas where finger space is
Contains special solder wire and flux that
limited. Grobet offers three styles.
allows titanium to be brazed as if it were 57.730V Vigor 4” Straight Tip . . . . . . . . . . . . . . . . $6.00
Lightweight and portable. Reaches 2,500°F nickel or steel. . . . . . . . . . . . . . . . . . . . . $103.00 57.731 4” Curved Tips for Access to Very Tight Areas
$6.00
Heat Shield
and has a two-hour burn capacity. Shipped
57.759 Self-Locking 4-3/4” . . . . . . . . . . . . . . . . . . $7.00
empty. Fills with standard butane available
Vigor Optical
2055 Self-Closing Fine Tip Tweezer
from your supply house or any cigarette
Western Optical
lighter store.
Our lowest cost quart-size Ultrasonic. Dual
axis holds BPI C.L. rack and instrument rack.
Stainless steel chassis.
17902 115V
3/4 Gallon Cleaner with Timer
14.212. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $78.00
Reduced Price!
BPI
Little Torch Disposable Tank Kit
Springs closed instead of open! Delicate point
plus sturdy stainless steel spring action holds
even the smallest screw securely. 6-1/4” long.
Vigor Optical
2055 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.00
Protects parts under direct 5,000°F from oxidation. Odorless, non-toxic and water soluble,
it avoids the set-up of protective equipment.
1lb (0.45kg) jar.
Ultrasonic Cleaners
Cleanrite II Ultrasonic Cleaner
A.I.T. Industries
54.448. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $21.00
Reduced Price!
For cleaning instruments, frames and most
jewelry.
Solder Paste with Flux
Vigor Optical
Pinpoint welding with total control. Perfect for
the beginner or experienced user. Superbly
balanced, only slightly bigger than your middle finger. Rugged aluminum alloy body,
weighs only 1.5oz. to reduce fatigue. Thin,
extremely lightweight hose gives added flexibility. Produces a perfectly controlled, completely stable flame hot enough to melt commercially weldable metals. Portable and convenient.
14.008 Torch kit with hoses, regulators . . . . . . $395.00
Vigor® Gas Soldering Kit
Vigor Optical
Can be used with beakers for specialized
chemical solutions. Ideal for labs, medical
facilities, and dental offices. 11-1/4” x 8-1/4” x
50 watts of power. Membrane switches. 6-3/4”. Tank: 9-1/2” x 5-1/2”x 4”d, 10lb (5kg).
Automatic timer. Translucent cover. Tank mea- Stainless steel.
209200 220V
sures: 6.5”l x 3.5”w x 2”d. 110V.
01924
Dispensing applicator gives you the right Visit www.aitindustries.com for current pricing
amount quickly, efficiently, and economically.
Belrose Ultrasonic Cleaner
Will adhere wherever applied with bright,
clean results and leaves little or no carbon
Belrose
residue. Easy to clean up with no waste. Gold:
1 dwt., 14Kt. Yellow 54.833. Silver: 1/2oz., 10
dwt. Easy flowing.
9200 115V
Gallon High Power Cleaner
BPI
54.830. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $28.00
Solder Rods with Flux
Vigor Optical
A quiet and durable unit with a space age
look. 35 watts of true ultrasonic power. Top
cover has clear “window” so you can watch it
work!
So simple to use just press power button to
start and a red indicator light appears on the
upper cover. Automatically shuts off after
three minutes and the indicator light turns off.
A blue light indicates you have power to the
unit so you are aware if your outler ever goes
Solder with flux rods. Gold-colored, 45%
faulty.
Silver alloy rods with flux core. Requires no
additional flux or cleaning agent. Melts at A capacity of 600mL with stainless steel tank!
1,275°F.
Exceptional Value!
Pinpoint welding with total control. User
friendly. Produces a perfectly controlled, completely stable flame up to 5300 degree F. Torch
comes with regulators and #4 tip. Uses disposable oxygen and propane fuel which must
54.755 Pack of 4 rods
be purchased locally.
Contains one of each of the following:
14.008–“Little Torch”
54.756 Pack of 12 rods
54.212 – Soldering Board
19300 115V
318400 220V
Half-Gallon Cleaner with Timer
BPI
Credit Cards Accepted
Belrose Ultrasonic Cleaner Model CD-2800 $99.00
1-1/2 Gallon Cleaner with Timer
Tweezers
BPI
14.058– Torch Holder
54.095– Third Hand Holder
Designed for volume cleaning needs. With
variable power mode selection. 6-3/4”h x
11-1/4”w x 9” front to back. Tank: 5-1/2”h x
9-1/2”w x 5-3/4”d, 9 lb. (4.1 kg).
Double Slotted Self-Closing ScrewHolding Tweezer
Vigor Optical
54.400– Hard Solder Flux
54.415– Fluid Dispenser
54.640– 10KT Yellow Gold Solder
54.771– Solder Pik
63.1511– Gas Soldering Video Tape
54.052. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $615.00
Exclusive scrubbing power featuring multiphasic, multi-frequency for various cleaning
needs. 8”h x 8-1/2”w x 8-1/4”d front to back.
Features up to 300W of power, operates with Tank: 6” x 5-1/8” x 5-7/8”d, 9lb.
six transducers. 13-7/8”w, 10-7/8” front to 18501 115V
Double Slotted Self-Closing Screw Tweezer back, 9-7/8”h. Tank: 11-3/8” x 6-1/4” x 218501 220V
for screw holding. Double 6.5mm horizontal 5-7/8”d. 11lb (5kg). 9400-115V; 319800-220V. Contact BPI for current pricing.
10/12/11 11:06 AM
FINISHING TOOLS
Ultrasonic Cleaners
Mini Ultrasonic Cleaner
BPI
Ultrasonic Rinse. Use full strength or dilute pounds.
with water. 71100 Quart. Ultrasonic A: Alkaline 32-ULTRASNCPINT
base, removes oxides from softer metals such Contact OptiSource for current pricing.
as aluminum. Follow with Ultrasonic Rinse.
Stainless Utrasonic Cleaner
Use full strength or dilute with water. 73200
OptiSource
Quart. Ultrasonic Rinse: Prevents formation of
oxides on metallic surfaces cleaned with
Ultrasonic R and A. Dilute with water. 69900
Pint.
minute cycle time. A blue indicator light on lid
shows when it’s in operation. The 20 oz.
(600ml) stainless steel tank comes with a
protective baseket. Input power is 35 watts,
115V, 60Hz (220V, 50Hz available).
CD-2800
PSI-BPI 20/20 Ultrasonic Cleaner
Ultrasonic Cleaner Accessories
PSI
BPI
Pint-size with variable frequency; the perfect
model for cleaning frames, most jewelry, and
small items. 3-1/2”h x 7-1/2”w x 5” front to
back. Tank 6” x 3-1/2” x 1-1/2”d. 5lb (2.3kg).
18701 115V; 218701 220V.
Our Ultrasonic Cleaner is powerful enough to
clean off dust and dirt on the surface of most
glasses, sunglasses, and contact lens accessories. This mini-lab sized ultrasonic cleaner
is our largest and most powerful machine. The
tank will fit any size (including wrap around)
eyewear. The stainless steel construction and
industrial parts will provide years of quailty
service.Powerful enough to be used with just
water, or with a cleaning solution if needed. It
is compact, leaving it to be the right size for
any OPTICAL part in need of deep cleansing.110 Volts with 60 watts of ultrasonic
power. The fully packaged weight is 4 pounds.
Quart Ultrasonic Cleaner
BPI
66200 Contact Lens Rack w/8 vials, for Quart
Cleaner; 66000 Contact Lens Rack w/2 vials,
for Personal Care Cleaner; 67800 Contact
Lens Rack w/12 vials, for Super Cleaner;
67100 600ml. Beaker Rack w/1 beaker, for 3/4
and gallon Cleaners; 366300 600ml. Beaker
Rack w/1 beaker, for Quart Cleaner; 67200
400ml. Beaker Rack w/3 beakers, for 1-1/2
Gallon Cleaner; 66700 Gallon Stainless Steel 32-ULTRASNC200
Perforated Immersion Tray, for gallon Cleaner; Contact OptiSource for current pricing.
67300 3/4 Gallon Stainless Steel Perforated
Ultrasonic Cleaner
Immersion Tray, for 3/4 Gallon Cleaner;
366500 Quart Stainless Steel Perforated
OptiSource
Immersion Tray, for Quart Cleaner; 366400
250ml. Beaker Rack w/2 beakers, for Quart
Cleaner; 366100 50ml. Mini-Beaker Rack w/2
beakers, for Quart Cleaner; 66600 1/2 Gallon
Stainless Steel Perforated Immersion Tray for
1/2 Gallon Cleaner.
Cleans and polishes all contact lenses, including extended wear lenses. Features dual-axis
scrubbing and Multi-Phasic power pulses.
The preferred system for contact lens cleaning; thousands now in use. Removes deposits
and minimal scratches; eliminates buffing and Contact BPI for current pricing.
scrubbing of ophthalmic gold, metal and plasDigital Ultrasonic Cleaner 1,375 ml
tic frames. 7-3/4”h x 8-1/4”w x 9”l. Tank: 6” x
OptiSource
5-1/4” x 4”d, 6lb (3kg). Stainless steel. 17001
115V, 18801 220V.
63
PSI offers the entire BPI ultrasonic cleaner
line. The offering includes the 1-pint Mini
Cleaner up to the 1-1/2 gallon capacity cleaner. PSI distributes the entire BPI product line
at manufacturer’s prices. We can take your
order for an ultrasonic cleaner along with
other supplies all on one convenient order. PSI
is also an authorized distributor for Hilco,
Sadler and Grobet-Vigor.
Ultra Clean Ultrasonic Cleaning
Solution
PSI
OptiSource concentrated, Ultrasonic Cleaner
is safe enough to use in any manufacturer’s
Ultrasonic machine.
Super-cleans parts,
frames, and most jewelry. Our Ultrasonic
Cleaner does not produce any odors or
vapors, and it settles particles.
Stainless Steel Super Cleaner
BPI
99-CG
Ultrasonic Cleaner (Quart)
Designed for production cleaning and polishing of contact lenses, surgical instruments or
small tools.
Our Digital Ultrasonic Cleaner is powerful
enough to clean off dust and dirt on the surface of most glasses, sunglasses, and contact
lens accessories.This ultrasonic unit is a combination of the ideal size and power. This digital model includes a removable lids, bright
digitial display and timer. It is compact, leaving it to be the right size for any OPTICAL part
in need of deep cleansing. 110 Volts with 60
watts of ultrasonic power. The fully packaged
weight is 4 pounds.
99-CQ
Ultrasonic Cleaner (Quart)
OptiSource
OptiSource
Ultrasonic Chemistry
BPI
use with ultrasonic cleaners for cleaning
frames and lenses. Ultra Clean will remove a
large variety of soils from metals, glass and
plastic. Concentrated solution.
2124G Gallon
3/4-gallon capacity. Optional package
includes Super Cleaner, 12 Vials, C.L. Rack,
three bottles of C.L. Polish, large Immersion 32-ULTRASNC1375
Tray and a bottle of Ultrasonic “C”. 11-1/4” x Contact OptiSource for current pricing.
10-1/2” x 7-1/2”. Tank: 9-1/2” x 5-1/2” x 4”d,
Digital Ultrasonic Cleaner 600 ml
4lb (1.8kg).
7501 115V
PSI’s Ultra Clean is specially formulated for
UltraSonic Cleaner
PSI
OptiSource concentrated, Ultrasonic Cleaner
is safe enough to use in any manufacturer’s
Ultrasonic machine. Super-cleans parts,
frames, and most jewelry. Our Ultrasonic
Cleaner does not produce any odors or
vapors, and it settles particles.
Futura Ultrasonic Cleaner
PSI
Designed for busy offices and labs.
Ultrasonic C: General cleaner for frames,
lenses and some jewelry; sequesters ionic
residues, settles debris to bottom of tank.
Dilute with water. 71200 Quart; 71201 Pint.
Ultrasonic L: All-purpose degreaser for fast
clean-ups of oil and grime. Dilute with water.
71300 Quart. Ultrasonic R: Acidic base,
removes oxides from metals such as stainless
steel, copper and bronze. Follow with
Our Digital Ultrasonic Cleaner is powerful
enough to clean off dust and dirt on the surface of most glasses, sunglasses, and contact
lens accessories. The unit delivers a concentrated ultrasonic pulse, and has a 3-minute
automatic shut-off timer. This Ultrasonic
Cleaner Machine has a large digital display for
precise timing. Powerful enough to be used
with just water, or with a cleaning solution if
needed. It is compact, leaving it to be the right
size for any OPTICAL part in need of deep
cleansing. 110 Volts with 35 watts of ultrasonic power. The fully packaged weight is 3
This
large, 45 oz tank, ultrasonic cleaner will hold
multiple pairs of glasses.
It offers an
advanced digital control system with five
cycle times (90, 180, 280, 380 and 480 seconds) for ehanced efficiency.
Push button
controls and large digital time readout make it
easy to operate. A strong transducer provides
The Futura Ultrasonic Cleaner from PSI has a
42,000 Hz of wave frequency at 60 watts for
sleek contemporary design that looks great in
dispensing areas. It offers quiet operation with great cleaning power. Part #CD-4800
automatic shut off after an approximate 3 Contact PSI for current pricing.
10/12/11 11:06 AM
64
FINISHING TOOLS
Ultrasonic Cleaners
Magic Green Ultrasonic Cleaning
4045 Aqua-Sonic Ultrasonic Cleaner
5070 Universal Screw and Nut
Solution
Western Optical
Grabber/ Laboratory Use
Vigor Optical
Western Optical
Concentrated powder. Mix 1oz. powder with 1
gallon water. Save shipping cost. Fast acting. Industrial power in a small package. Complete
with a three minute automatic shut-off timer
Santinelli Ultrasonic Cleaners provide full, Biodegradeable. Safe for coating and frames.
and stainless steel bath. 42,000Hz energy
efficient power at affordable prices. The No ammonia.
cleaning tank is recessed for less spillage. An 22.608 8oz. powder. . . . . . . . . . . . . . . . . . . . . . . $14.00 wave output frequency at 35 watts. ETL
impact-resistant, durable housing withstands 22.616 16oz. powder. . . . . . . . . . . . . . . . . . . . . . $25.00 approved. Outer housing: 8”w x 5-_”h x 5”d.
the toughest cleaning solutions and is light- Reduced Price!
Includes FREE quart of #4042 Biodegradable
weight for benchtop convenience. The tanks
Mini Ultrasonic Cleaner
Ultrasonic Cleaning Solution. 90 day warranare made of stainless steel and all circuitry is
tee.
Vigor Optical
solid state for a long, trouble-free life. Digital
4045 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $49.00
readout/controls eliminate timing guesswork
and with the touch of a control, you can set
Wrenches
and monitor exact cleaning cycles up to 99
minutes. Digital display shows solution temperature and includes a de-gas function. For
Economy Screwdriver & Hex Wrench
simplicity, one control activates ultrasonics
Set
and sets a time limit. Accessories include:
cover, solid tray, perforated tray, beaker posiVigor Optical
tioning cover and beakers. 115V, 50/60Hz.
Available in 220/240V, 50/60Hz.
Ultrasonic cleaning action in a small, aesthetiContact Santinelli for current pricing.
cally pleasing package. Three minute autoUltrasonic Cleaner Suresonic
matic shut off timer, stainless steel tank and
Sentilles
plastic basket. Small 8” x 5” footprint. 5.5”
high.
This is the driver you can’t live without! As the
size and shape of lock nuts proliferates so
does your collection of nut drivers. How many
times a day do you try driver after driver and
never find one that grabs your nut?
Ultrasonic Cleaners
Santinelli
23.598 110 Volt . . . . . . . . . . . . . . . . . . . . . . . . . . $75.00
23.598X 220 Volt . . . . . . . . . . . . . . . . . . . . . . . . . $76.00
Western has ended your search with the
Universal Screw and Nut Grabber!
The
expandable jaw automatically grips any size
or shape lock nut, hex nut, star nut, cap nut or
round nut.
Extra value: two tools in one! The Universal
Screw and Nut Grabber doubles as a screw
starter! Placing a screw in the self-closing
jaws makes it easy to thread even the smallest
screw into the hardest to reach places. The
more pressure you apply, the tighter the grip
on the screw.
The Universal Screw and Nut Grabber is the
one driver that does it all. Excellent for inserting a hinge screw when using the Spring
Hinge Plier Kit (#2018).
Solid all metal construction. 3-3/4” long.
Patent pending. Made in the USA.
5070 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $27.00
5075 Universal Screw and Nut
Grabber
Ultrasonic Cleaning Solution
One Spring clip handle for use with double
Concentrate
ended screwdriver blades Blades:1.6mm x
Vigor Optical
2.5mm flat Wrenches: 2.0mm 1.6mm x 2.0mm
Western Optical
Phillips 2.3mm 1.6mm x 1.6mm Flat 2.5mm
2.0mm x 2.0mm Flat 2.6mm 2.0mm x 2.0mm
Generates 42,000 Ultrasonic energy wave
cycles that deep cleans Eyeglasses, Jewelry
and small parts without heat or flammable
Solvents. Safe gentle and thorough. One Pint
Stainless steel tank, transparent view lid with
interior light. Quiet operation and Auto shutoff after 3 minutes.
Size: 5.5Hx 8” L x5” W
Weight: 2 Lbs. # 8080
Flat/ Phillips “T”. . . . . . . . . . . . . . . . . . . . $35.00
Hexagon Wrench Combination Kit
Vigor Optical
Electrics:120V ,50 W
Heavy Duty Ultrasonic Cleaners
Vigor Optical
This non-ionic, multi-purpose solution is safe
for all ultrasonic cleaning needs. It contains
no acid, will not cause rusting or corrosion,
and will not damage parts. This new solution
is biodegradable, environmentally safe and
will not irritate or dry out normal skin. One
quart of concentrate when mixed with water
makes 10-25 gallons of solution.
23.2050. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $57.00
4042 Biodegradable Ultrasonic
Western has ended your search with the
Universal Screw and Nut Grabber!
The
expandable jaw automatically grips any size
All-metal wrenches with swivel head and or shape lock nut, hex nut, star nut, cap nut or
spring ejection. Makes the removal of hex round nut.
nuts easy. Consists of 52.752 Brown head
Extra value: two tools in one! The Universal
which fits nuts for 1.27mm screws; 52.754 Screw and Nut Grabber doubles as a screw
Blue head which fits 1.4mm and 1.3mm screw starter! Placing a screw in the self-closing
nuts for European frames; and 52.875 Silver jaws makes it easy to thread even the smallest
screw into the hardest to reach places. The
head which fits domestic trim screw nuts.
more pressure you apply, the tighter the grip
52.750 Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $42.50
on the screw.
Reduced Price!
Cleaning Solution
Western Optical
Standard features include a stainless steel
tank and cover, automatic tuning and a pilot
light. A 30-minute/hold timer enables you to
pre-set the cleaning cycle duration or select
continuous cleaning. Cleaning power is 35
KHz. The 31/2 quart (3.1/2qt) models have a
stainless steel, multi-position drain for convenient solution disposal. Each unit is warranted
for defects in materials and workmanship for
2 1/2 years. These units have earned worldwide approvals-CSA, LA, FTZ, GS Mark and
conform to CE requirements and meet FCC Ultrasonic cleaners perform more effectively
requirements.
and efficiently with this biodegradable clean23.586
ing agent. Removes dust, dirt, oil and residue
Capacity:2 qt: Volts: 110V: Weight: 8 lbs.: Length: 6”:
from lenses, bevels and spectacles. Frames
Width:5 3/8 “:Depth: 4” . . . . . . . . . . . . . . . . . . . $580.00
and lenses do not need to be rinsed before
23.587
Capacity:3 1/2 qt: Volts: 110V: Weight: 10 lbs.: Length: drying. Use only one ounce per tank.
9 1/4”: Width: 5_”:Depth: 4” . . . . . . . . . . . . . . . $840.00
4042 Four Ounce, Super Concentrate . . . . . . . . $12.00
This is the driver you can’t live without! As the
size and shape of lock nuts proliferates so
does your collection of nut drivers. How many
times a day do you try driver after driver and
never find one that grabs your nut?
Wrench Set
Vigor Optical
The Universal Screw and Nut Grabber is the
one driver that does it all. Excellent for inserting a hinge screw when using the Spring
Hinge Plier Kit (#2018).
Available in two models: solid, all-metal construction for continuous use or an injection
molded plastic exterior for office use. 3-3/4”
long. US Patent Application #11/833.527.
Made in the USA.
5075 Universal Screw and Nut Grabber/Office Model .
$19.00
Lock Nut Ejector Wrench
Western Optical
Set of five wrenches. Adjusts the fittings of
imported frames, including hex nuts, scalloped hex nuts and slit nuts.
52.753 Complete set . . . . . . . . . . . . . . . . . . . . . . $70.00
52.75301. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $13.00
All metal construction with swivel head and
nut ejector. 4-5/8” long.
Reduced Price!
2054 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $16.00
10/12/11 11:06 AM
FRAME TRACERS
Teleform
Frame Tracers
A.I.T. Industries
CNC-3D
A.I.T. Industries
automated lens centering and blocking with
automatic lens and frame recognition.
Includes motorized arm for block placement
and digital scanning of demo lenses and patterns. Intuitive & user-friendly graphic interface with a wide high-resolution touch screen
LCD. 12” w x 19” d x 18.5” h, 52 lbs, 100/120
VAC, 50/ 60Hz. THREE YEAR WARRANTY.
Excelon EZ Tracer/Blocker
Coburn
The CNC-3D features: Tracer, centering
device and blocker, all in one; 3D tracing; tracing of frame, pattern or lens; automatic entry
of the sensing device; possibility of reading
only one eye and transposing for the other
eye; LCD icon-based display; blocker arm;
optional bar-code reader; calculation of the
minimum diameter neede for the lens; error,
alarm and help messages. Specifications:
11.57”w x 19.69”d x 13.19”h, 37lbs,
110V/60Hz, 100W.
Combimax
A.I.T. Industries
The Teleform tracer has the capabilities to be
used as a stand alone product for remote
tracing or integrated with the Mini-Bloc layout
blocker to be used with either a Maxima or
Optima Edger. The Teleform has fully automatic three-dimensional tracing capabilities
and is equipped with a unique simultaneous
dual eye tracing capability. The teleform can
trace frames, pattern and demo lenses. The
Teleform tracer has the capability to operate
in a wholesale lab environment with the ability
to communicate under the Optical
Manufacturing Association communication
standard and is bar code capable. 12.2”h x
10.25”w x 14.56”d. 220V/50Hz. 110V/60Hz.
180W.
WECO Trace 3 3D Tracer
A.I.T. Industries
65
With DigitalTrace™ fast & easy job entry, a
Doctor or ECP's centrally located edging lab
can receive a trace from a satellite location to
have the job blocked & edged in minutes!
• Creates a remote transmit and receive situation for finishing labs with remote entry locations
• Utilizes the Internet to transmit job data, so
• Job Entry validates the Rx data to be correct
before sending
• Connects easily to blockers, edgers and
tracers
• Traces can be queued and Job Entry performed later
• Full configuration control over the lens and
services database
The Excelon EZ Series is a cost-effective and
compact finishing system that integrates edging, blocking and tracing for ease of use. The
one-body combined tracer and blocker provides various functions in a smaller and more
convenient footprint. The Excelon EZ edger
combined with the EZ tracer/blocker reduces
non-value added steps and delivers high quality lenses to the market at the lowest cost of
ownership. Features automatic detection of
reading point and 3-Dimensional feeling of
front /rear sides of lens. Can trace normal
frames, rimless, and high-curved goggles.
Layout adjustments done on the tracer without moving the jobs to the edger. 10.75” w x
18.5” d x 8” h, 27 lbs, 110/220 VAC, 50/ 60Hz.
THREE YEAR WARRANTY.
• Communicates with equipment using the
industry-standard data communication protocol (VCA/OMA compatible)
Take a tour and download the latest version
of DigitalTrace™ now at www.digitaltrace.net
or call 800.795.9927. Email info@digitaltrace.
net today for a free 30-Day no obligation trial!
ModShape™
ModShape™
Excelon Tracer
The Combimax unit combines the tracer, centering device and blocker all in one. The tracer
system’s unique Dual Scan Tracing system
(DST) enables both eyes of the frame to be
traced simultaneously. Its exclusive patented
Digital Image Processing system enables the
Combimax to directly recognize the identification marks of a single vision, bifocal or progressive lens, allowing it to process the information and center the lens automatically. This
unique system is the only one available capable of completely eliminating parallax error.
Other features such as Windows icon-based
interface, prismatic value calculation, high
definition TFT color screen, automatic entry of
stylus, buffer job memory and hands free
blocking make the Combimax tops in the
industry for tracing and layout. 12.91”h x
16.14”w x 14.76”d. 220V/50Hz, 110V/60Hz.
400W.
OperaScan
A.I.T. Industries
Coburn
When developing the Trace 3, we considered
several points that are quite important to a
modern practice: Easy, self-explanatory, and
intuitive operation in addition to superior
accuracy of shape traces. Also important to
us is improving the workflow and operation.
Before data is transmitted, traces can be
checked thoroughly by the user. Varied failsafes such as integrated help menus and data
comparisons provide the user with additional
guidance and help to avoid errors.
Coburn Finish Blocking Pads
Coburn
View, modify & save any frame shape or pattern to and from your lab system!
The Excelon series provides the versatility and
efficiency that today’s retail practices require.
Combine the Excelon Edger with the Excelon
Tracer and compatible blocker unit for a complete solution customized to meet your specific finishing needs. Features fully automatic
3-Dimensional tracing, fast tracing of frames,
patterns & lenses with real-time automatic
data transfer to Edger. Includes Left-Eye,
Right-Eye, or Complete tracing modes and
automatic data transfer of FPD to Edger. 20
lbs, 110/220 VAC, 50/ 60Hz. THREE YEAR
WARRANTY
Coburn finish blocking pads are available in a
variety of shapes and sizes and offer outstanding torque resistance to eliminate axis
problems during edging. These pads also
offer superior adhesion to all lens types
including anti reflective and hydrophobic
coatings. Coburn pads hold firmly while
blocking and edging, and after processing will
remove cleanly leaving no adhesive residue Contact Coburn for current pricing.
on blocks or lenses.
270621 18 mm, round, Essilor Posiblock half eye,
1,000 per roll
270631 18 mm, semi-round, Weco Vario half eye,
1,000 per roll
270641 24 mm, square, all purpose, 2,000 per roll
270651 24 mm, round, all purpose, 2,000 per roll
DigitalTrace™
DigitalTrace™
• View & verify shapes
• Adjust DBL
Embedded Windows XP Operating System
Color Touch Screen Monitor.
Zoom and edit functions to modify and refine
hole sizes.
Recognizes axis of demo lenses automatical- A one-stop solution, combining the functions
ly.
of a tracer, lensmeter, and blocker in one
Ability to customize shapes by changing cir- powerful system. Fully automated lens centercumference, horizontal or vertical measure- ing and blocking is now available at the push
of a button. Just place the lens in position and
ments.
the Excelon will do the rest. Features fully
065-066_SF1110_FrameTracers.indd 65
• Detailed grid to check for off-axis tracings
Coburn
Complimentary scanner to the CNC Opera
Drill to make programming easy and accurate.
Connecting ModShape™ to a lab system host
is no different than connecting a new piece of
lab equipment. Using hardly any resources,
ModShape™ does not need to run on a dedicated PC and requires only one free serial
port. ModShape™ appears as a standard
edger & tracer to the lab system host:
• Change A, B and/or Circumference
Excelon Auto Tracer/Blocker
OMA Compliant scanner which can automatically recognize drill point coordinates, shape
and contour of demo lenses and patterns.
Some lab software systems such as
Optifacts®, Innovations® and others may not
allow you to view and modify frame shapes.
With the Windows®-based ModShape™ software, your lab can change any active shape
from your lab system. ModShape™ requests
frame shape data from the lab system by tray
or job number. You can then modify the
shape's A or B box measurements, the circumference, or modify just the lower half of
the box B - useful for accommodating progressive lenses! ModShape™ will then save
the modified shape to the same or different
job.
• Rotate axis
• Original vs. modified shape comparison
DigitalTrace™ is the perfect solution for • Easily create multiple eye sizes for one
optometrists, opticians and other ECPs to shape
connect satellite tracing locations with a cen• No more making patterns and hand-adjusttralized edging lab.
ing
job entry interface with input from a frame • Save time - simple to use
is checked prior to sending, helping to eliminate data entry errors.
• Use with any lab system software
ModShape™ is easy to install & use with any
OMA/VCA compatible lab management host
software system! Download the latest version
of ModShape™ now at www.modshape.com
or call 800.795.9927.. Email info@modshape
com today for a free 30-Day no obligation trial!
10/12/11 11:07 AM
66
FRAME TRACERS
Frame Tracers
Dimension Tracer
Optivision® Remote Order Entry
(ROE™) w/ Trace
LT-910 Remote Tracer
Santinelli
Optivision®
National Optronics
The LT-910 Remote Tracer features robotic
clamping and dual-eye 3D tracing for consistent, highly reliable tracing. Exclusive features
include Santinelli’s Super-Fit 3D tracing which
assures the perfect eye size relative to the
frame curve. State-of-the-art stylus tracking
mechanism assures fully automatic and
extremely accurate tracing even on the most
difficult frames including half eye and challenging small shapes. An easy-to-use pattern
setting assembly traces patients’ lenses,
demo lenses and patterns.The simple design
of the LT-910 enables a trainee to operate like
a pro. Precise, automatic tracing measures
adjustment for various frame materials includ- The Optivision® ROE™ allows for the scan- both right and left eye within 0.01mm accuraing fragile materials. The 5T SURROUND ning of a frame trace so that the dispensary’s cy and perfect DBL measurements is achieved
handles frames, lenses, patterns
customers never need to part with their automatically.
frames. Quality traces are assured due to a Our LT-900 now interfaces with VisionWeb
FrameTrace.com™
new method of calibration. The ROE™ is Essential, making tracing more effcient by
extremely user friendly and will save Rx turnFrameTrace.com™
linking it to any laboratory in the VisionWeb
around time, limit missing data & eliminate
network-increasing accuracy while reducing
data entry errors, which ultimately reduces
turn-around time.
breakage.
The Optivision® Remote Order Entry (ROE™)
with Trace is the best in the industry. The
ROE™ is a web-based Rx ordering screen
with patent-pending technology that easily
accepts frame trace data from all popular
Finally a breakthrough tracer that handles
frame tracers. ECPs, dispensaries and satelevery frame on the market even extremely
lite locations can transmit Rx orders directly
high wrap styles. A unique rotating frame
into the lab system through the Internet.
holder automatically processes any degree of
frame wrap without operator intervention. It Designed to reduce errors during the order
also uses a simple, touch screen for ease of entry process, the ROE™ immediately valioperation. A front opening storage drawer dates data to notify the user of invalid entries
keeps calibration instruments and other
or values. Drop-down menus allow for choices
items in a safe place. Ethernet and wireless in data entry, extra services, special instrucready; optimized performance with automatic tions and standard shapes.
No more faxes and no Rxs for staff to re-key
means time and money saved by eliminating
errors and call-backs - your lab will be processing more orders and getting them out the
door faster! The use of Eyefinity, VisionWeb
and Interlab Transfer services are integrated
into the ROE™. This module also provides
FrameTrace.com™ creates the easiest way Web-based Work in Progress where your
for a frame trace to be sent with any Rx order: customers can access job status online 24
hours a day.
• Dispensary traces frame, enters reference,
clicks send - Done!
team and contact information at www.optivi• Lab selects a trace, enters tray number, sion.com or call 800.795.9927 now!
clicks save - Done!
LT-1000 3D Remote Tracer
Reduce shipping cost, reduce errors and
increase efficiency & productivity by no longer
waiting for frames to arrive! Regardless of
your lab system software, FrameTrace.com
places electronic trace data in the tray with
the designated Rx - just as if you traced the
frame right there in the lab.
Santinelli
FrameTrace.com™ is also the perfect solution
for sending & receiving traces for VSP jobs!
Contact FrameTrace.com™ by visiting
‘Feedback’ at www.frametrace.com or send
an Email to [email protected]
Optronics 4Ti Frame Tracer
National Optronics
Santinelli International presents the LT-1000, a
new frame tracer with an added LCD Screen
for wholesale optical laboratories, using true
3D patented technology for a 99.9% level of
accuracy and greater one-cut edging. A low
pressure, active control stylus eliminates
frame distortion and disengagement.
From the most successful tracing technology
on the market- the 4T, comes the new 4Ti. It
adds improved functionality and reliability to
an industry leading design. Fully automatic in
stylus positioning, tracing of both eyes and
calibration, and calculates measurements in
3-axis and utilizes a unique front-load frame
holder. The DBL is automatically calculated
and displayed on an integral screen. The 4Ti is
manufactured as a stand-alone unit or can be
docked onto any Optronics pattern less edger.
And it is ethernet equipped. 10.25” x 14.35”.
The unit captures tracing data by digitizing
32,000 reference points per frame side for
maximum precision. It complements the company’s existing LT-900 tracer, utilizing the
same advanced technology. The LT-1000
Tracer features a user-friendly, interactive 1.8”
LCD touch screen. The LCD touch screen
gives the operator a quick view of traced data
confirmation, as well as other pertinent data
for lens processing such as “A”, “B”, “DBL”,
“ED”, and “C-Size” information. The LT-1000
features a unique Shape Editing Mode for
creating customized rimless and semi-rimless
eyewear. The unit is also ideal for tracing traditionally challenging high-curve/high wrap
frames and is VCA complaint.
065-066_SF1110_FrameTracers.indd 66
10/12/11 11:07 AM
GENERATORS
Automatic Sphere Generators
Air requirements: 80 – 100 psi 48” w x 39” d x 64” h
1220 mm x 990 mm x 1626 mm
Automatic Toric Generators
SGX Plus
Contour
Coburn
Coburn
Optek
Contour is Optek’s entry-level lens generator
and lap cutter. It features advanced mechanical and software technology to provide
exceptional levels of accuracy, speed,
dependability, and operational simplicity. Key
Features include: Graphical display of lenses
and lap tools provides and extra level of job
validation; Cuts all supported lens materials
with the same cutter; Automatically cuts lap
tools that host reports are not in inventory;
Based on proven, efficient, and reliable three
axis mill technology; Optional polycrystalline
diamond cutter technology offers superior
durability and substantial cost-per-lens savings; Sealed grind chamber minimizes debris
contamination of machine components; The
chuck and lens rotate only – all other movement is accomplished in the cutting head,
minimizing the complexity of the design, the
need for maintenance , and the exposure to
Weight: 165 lbs/75 kg Specs: 30’ w x 28” d x wear-induced inaccuracy; Enclosure is con31” h 762 mm x 711 mm x 788 mm
structed of heavy duty 16 gauge sound-insuContact Coburn for current pricing.
lated sheet metal – no injection molded plasAxiom
tic; Ethernet or serial interface capability with
host Rx software
National Optronics
The SGX Plus Surface Generator provides
progressive labs around the world with proven, high-performance cutting technology for
CR39, hi-index, and polycarbonate lenses.
Compact and intelligent, the SGX Plus processes all lenses totally free of elliptical error.
Its computer-controlled precision provides a
low-stress means of generating exact prescription curves. Additionally, the SGX Plus
uses Gerber Coburn’s three-axis, dry cut
method of lens generating to ensure superior
lens quality, while creating less mess in the
The CTL65 is the fastest traditional Rx lens lab.
generator in it class offering both high speed To meet the diverse needs of its growing cusand cut-to-polish modes. This entry-level tomer base, the SGX Plus now offers an
lathe generator cannot be upgraded to pro- extended processing range, new 50/60 Hz
cess free-form, however it is an ideal fit for brushless motor, small diameter lens cribbing,
labs familiar with the popular Coburn SL2 lower cost auxiliary components, and an all
series.
material, longer life, 9-flute cutter.
The CTL85 is our advanced manual generator
that takes conventional and cut-to-polish lens
processing to new levels. The CTL85 is ready
to be upgraded to digital and freeform processing, crib-to-oval cutting, and lens diameter measuring features.
The CTL85DP model adds both the advanced
lens processing digital (Free-form) and the
lens diameter measuring features from the
factory. Lens can be processed using conventional finers & polishers or combined with the
MAAT sub aperture polisher for an economical
free-form system.
DTL Generator
Coburn
The DTL Generator is an affordable highspeed, dry-cut, single point diamond turning
lathe that employs precision diamond machining technology to achieve extremely smooth
lens surfaces. Built for speed and precision,
the unique Hyper Speed Axis-Cutting
Controller, self-contained Cutting/Swarf
Chamber, and User Interface promote high
lens throughput, ease of operation, and a
clean environment. DTL uses multi-data
points to ensure that semi-finished lens
blanks are surfaced, cribbed, and safety beveled in a fast and accurate process. This
helps to reduce lens spoilage while optimizing
lens and lap cycle times. And because the
DTL uses a dry-cut process, the need for an
expensive water-reclaiming filtration system is
eliminated.
Whether processing 250, 500, 1,000 or more
jobs per day, High speed CTP, or digital processing DTL’s industrial-strength, expandable
platform helps labs improve productivity and
cut operating costs. For those labs seeking to
further reduce labor costs by automating the
process, an automated version is available.
Weight: 2,800 lbs/1270 kg
Power: 208 – 250 VAC, 50/60 Hz, single
phase, 20 Amps (Requires dedicated circuit)
Optivision® unveils the latest version of the
world-renowned Optivision® Laboratory
Management System™, the most comprehensive, easy to use and affordable full Lab
Software system in the industry. Optivision®
takes advantage of the user-friendliness,
speed and other feature-rich functionality of
the Windows® operating system.
Optivision’s powerful Windows®-based Lab
Software promotes accurate job entry & automated lens processing for wholesale and
retail surfacing, finishing and AR coating labs
of any size.
Designed by lab people for lab people, the
Optivision®
Laboratory
Management
System™ will meet your needs now and in the
future. The user-friendly system allows your
lab the power and flexibility to customize the
system to match the specific procedures of
your lab. Designed to reduce errors during the
order entry process, the system immediately
checks operator entries to notify the user of
any invalid entries or values. Barcode scanning capability speeds order entry by automating the entry of information from your
extensive custom database.
Designed to reduce errors during the order
entry process, the Optivision® Remote Order
Entry (ROE™) immediately validates data to
notify the user of invalid entries or values.
Weight: 435 lbs
Drop-down menus allow for choices in data
Power: 115V, 7A, 60Hz, 1˜; other voltages entry, extra services, special instructions and
available
standard shapes. The Optivision® ROE™
allows for the scanning of a frame trace so
that the dispensary’s customers never need to
Contour MAX
part with their frames. Quality traces are
Optek
assured due to a new method of calibration.
The ROE™ is extremely user friendly and will
save Rx turnaround time, limit missing data &
The 3G Surface Generator is the next generaeliminate data entry errors, which ultimately
tion of dry-cut, 3 axis generators for all
reduces breakage.
organic materials. Its new, sleek design is
OptEquip™, the Machinery Interface compocompact and ergonomic that is easy for table
nent, allows machines from different manutop mounting. The new touch screen user
facturers to interact with each other throughinterface is more attractive and user friendly
out lens processing. Imagine tracing a frame
than previous designs with its easily viewable
on one brand of tracing equipment, surfacing
and movable display. 115 VAC Hz, 1500 W;
on another brand of generator and edging it
230 VAC 50 Hz, 1500 W. Approx. 20” x 27.2”
on yet a third different brand of edging equipx 31”. Approximate weight 110 lbs. Contact Contour MAX is Optek’s flagship lens genera- ment. Your lab now has the complete freedom
National Optronics for current pricing and tor and lap cutter. Through advanced mechan- to choose, mix and match any lab equipment
availability.
ical and software technology, Contour MAX you want without ever worrying about manudelivers the highest levels of accuracy, speed, facturer machine compatibility.
Automatic Sphere Generator CMVdependability, and operational simplicity. Key
Extensive lens usage and management
C130
Features include: Touch screen control sys- reports help you monitor all aspects of your
Sentilles
tem: Graphical display of lenses and lap tools system for increased efficiency in your lab.
provides an extra level of job validation; System customization capabilities allow you
Whisper-quiet operation; Cuts all supported to maintain system constants through simple
lens materials with the same cutter; High- menu options, allowing for true customization
speed, long-life spindle motor; Polycrystalline of the software.
diamond cutter technolody offers superior
durability and substantial cost-per-pens sav- Completing your lab’s software system are
integrated Accounts Receivable, Accounts
ings; Sealed frind chamber minimizes debris
Payable and General Ledger accounting modcontamination of machine components; The
ules - no more double-keying data into
chuck and lens rotate only – All other move- QuickBooks or other third-party accounting
ment is accomplished in the cutting head; software.
minimizing the complexity of the design, the
Time-proven design ensures long life with need for maintencnce, and the exposure to • Fast and easy one-page Order Entry
minimal maintenance. Produces up to 450 wear-induced inaccuracy; Enclosure is con• Precise surfacing calculations
precision surfaces per hour. Thickness adjust- structed of havy duty 16 gauge sound insument accurate to within 0.01mm. Curves lated sheet metal – no injection molded plas- • Windows®-based software
accurate to 0.001mm depth of curve (0.0025 tic; Ethernet or serial interface capability with
• Freeform compatible
diopters). Lens diameter range 30mm to host Rx software
• Machine interfacing
130mm. Curve range plano to ±21D. High frequency spindle eliminates all mechanical Size:36.5” W • 28.5” D • 47.5” H
• Job flow tracking
transmission. No blocking required. Options
Weight: 500lbs
• Accurate invoice pricing
available. 59.1”h x 35.4”w x 49.2”d (150cm x
90cm x 125cm). 220V/380V, 50Hz or 60Hz, 2hp Power: 115V, 7A, 60Hz, 1˜; other voltages • Inventory control
available
total. 88psi (6bars). 1,320lbs (600kg.).
• Integrated accounting
067-072_SF1110_Generator.indd 67
Optivision® Laboratory Management
System™
Optivision®
CTL Generator
The CTL generator, a manual compact turning
lathe, utilizes our patented single-point technology to produce conventional, digital, and
free-form lenses for small to mid-size laboratories. CTL uses multi-data points to ensure
that semi-finished lens blanks are surfaced,
cribbed, and safety beveled in a fast and
accurate process. Similar to the larger DTL
generator, the CTL continues to offer the
same traditional benefits of dry-cut, lens processing that you have come to expect from
Coburn.
67
Size: 36.5” W • 28.5” D • 59” H
10/12/11 11:08 AM
68
GENERATORS
• Comprehensive reporting
Chopper RC
OWC
• Automated lens & program updates
• Can be tailored to suit the way your lab
conducts business.
5.All Material high speed processing
Specification:
Width: 30” (762mm)
Depth: 28” (711mm)
• The most affordable lab software!
Height: 31” (788mm)
Weight: 165 lbs (75kg)
Electrical: 230 Volt, 50/60 HZ, 5 Amp
Optivision® OptiCalc™ Rx
Calculation & Machine Interface
System
Vista 2G Generator
OWC
Optivision®
For poly and other lens materials at generation.
Precision’s High Efficiency Quick
Change Generator Recirculation
System
Housing assembly P/N 4426950
Complete chopper assembly P/M 4422350
Precision Tool
IQ SL-2 RC Generator
OWC
Optivision’s powerful lab software promotes
accurate job entry & automated lens processing for wholesale or retail surfacing, finishing
& AR labs of any size.
Reduction of spoilage is very important to
keeping your profits high - OptiCalc™ maintains accuracy throughout the system. Results
from the Rx calcs are provided on a Shop
Ticket. OptiCalc™ incorporates the Machinery
Interface component, which allows machines
from different manufacturers to interact with
each other throughout lens processing.
Imagine tracing a frame on one brand of tracing equipment, surfacing on another brand of
generator and edging it on yet a third different
brand of edging equipment. Your lab now has
the complete freedom to choose, mix and
match any lab equipment you want without
ever worrying about manufacturer machine
compatibility.
Compact 3-axis, computer-controlled generator. Range ± 30,000 diopters; prism up to
20.00 diopters. Automatic cribbing and pin
bevel. 53”h x 30”w x 25”d (156cm x 75cm x
64cm), 294lb (134kg), 110V, 20A.
The Windows®-based Optivision® OptiCalc™
Lab Software system is designed to provide
precise surfacing calculations, machine interfacing & lens manufacturing.
The Optivision® lens grinding specifications
are derived from mathematical, trigonometric,
algebraic, plane geometry and physics calculations on each and every lens, not from some
“grinding chart”. These original calculations
make Optivision® Lab Software the most
accurate system in the industry.
generating or edging processes involving
plastic (CR-39®-type, high index, polycarbonate) and glass lenses. This versatile usage
produces a significant cost savings. The product’s exceptional heat transfer characteristics
also ensure prolonged diamond life. DACKool
provides rapid settling and is compatible with
all filtration systems. Benefits: versatile for
both plastic and glass, better surfaced finishes, faster removal rates, problem-free filtration with all systems, extended diamond life,
operator acceptance. DACKool is designed
for use at economical dilution ratios and is
equally effective in hard and soft water.
Available in 5-gallon pails and 55-gallon
drums.
Voltage Stabiliser
High efficiency, quick-change reusable filtration system designed specifically to filter
polycarbonate and high index cuttings. Filters
can be changed by generator operator without interruption of production. This unit is an
excellent alternative to a generator centrifuge
system. All stainless steel tank. Stainless
Steel, industrial duty pump. Cooling element
maintains even temperature throughout the
system. Heavy-duty wheels mounted on tank
for ease of set-up and routine cleaning. 32”h x
27”w x 16”d. 50 gallon tank capacity up to
43gpm. Available in 110V, 208V or 220V AC
Provides voltage adjustment and surge/sag single or 3-phase 1/4hp, 1/3hp or 3/4hp
motors.
protection.
OWC
Cuts poly, high index and CR-39 as well as
plastic laps. Can be fitted with an uupgrade
express kit for faster CR-39 and high index
production.
Weight: 1000 lbs
10A, 220 volt, 50/60 Hz, 1 phase Specs: 38”W
x 28”D x 68”H
IQ XRT RC Generator
OWC
P/N 12401-00
V75 Generating Center
Filter
PSI
Satisloh
Optivision® OptiCalc™ Lab Software can help
your lab save time and labor to generate more
income!
team and contact information at www.optivi- Curve range +7.00 diopter to -20.00 diopter.
Prism up to 10.00 diopters
113-HW RB Generator
OWC
Computer-controlled multi-axis movement
and cutting tool flexibility enable the Satisloh
V75 Generating Center to surface, crib, chamSupports up to 30 different lens materials.
fer and generate prism in the same work
Weight: 1350 lbs
cycle. It offers high volume lens production at
a low cost. All lens materials can be pro10A, 220 volt, 50/60 Hz Specs: 48”w x 28”D x
cessed, including glass, as well as lap tools.
52”H
The V75 can manufacture up to 70 lenses per
hour without compromising surface quality or
SGX Turbo RC
smoothness. In any configuration, the cutting
chamber is completely enclosed, assuring
OWC
clean and quiet operation.
Coolant Equipment
All-purpose, medium-duty generator features:
use of extended quad scale and optional
alternate sized diamond wheels curves of
plano to 20.00 diopters on the cross curve and
3 to 20.00 on the base curve, manual operation if desired generates +/- curves, fully synchronized coolant flow, new ball-type coolant
manifold eliminates awkward coolant tubes,
permits instant adjustment of coolant flow for
any size wheel, dial-set hydraulically powered
cross and base curve slides, automatic
clamping, improved thickness control, heavyduty quill motor for one-cut operation, and
plug-in components for easy servicing. 65”h x
58”w x 29”d (165cm x 147cm x 74cm). 1,760lb
(798kg). 230V AC, 15A.
DACKool Coolant
952
Generator Calibration
Precision Generator Dial
Recalibration Service
Precision Tool
DAC Vision
Let us recalibrate your 12th diopter generator
dials to 10ths. Now you can have your existing
equipment accurately recalibrated instead of
spending thousands of dollars on new generators. Your lab can use its new generator
The SGX Surface Generator is:
savings on a set of tenth tooling and still come
1.High perfomace 3 axis unit
out ahead. We have provided this service to
labs throughout the country with great suc2.Tabletop design
cess. In most cases your generator will be
3.Ability to process lenses and laps with equal
more accurate than ever. This is the least
ease and accuracy
amount of money you will ever spend to effec4.Easy to use dry cutting. No water or Coolant DACKool is a synthetic formulation developed tively and accurately re-engineer your lab.
to optimize removal rate and surface finish in Contact Precision Tool for current pricing.
to change
The 952 replaces generator coolant tanks or
edger buckets. The 952 has a capacity for
three edgers or one generator processing
glass or plastic. The filter bag collects up to
50 microns of solids and the pump returns the
filtered water to the process. The 952 filter is
designed to greatly extend coolant and wheel
life and eliminate the discharge of solids into
the drain. Output of up to 6 gpm. 110V. 60Hz.
10/12/11 11:08 AM
GENERATORS
SL2 P/N 11638-00
Generator Parts
Ball Bushing
Door Hinge
OWC
OWC
69
A Axis Motor SL2
Cutters for SGX and SG8 Surface
Generators
OWC
Coburn
Replacement part for LM/ XRT/ SL2
Ball Bushing P/N 9697-00
A Axis Motor SL2 P/N 11637-00
Milling ball cutters for SGX and SG8 Surface Contact OWC for current pricing.
Generators are offered in several designs to
A Axis Servo Motor
maximize performance and long life. Eleven
flute cutters are designed for a multi-material
OWC
environment including CR-39, hi-index and
polycarbonate lens materials. Three flute cutters are specifically designed for polycarbonate lens processing, increasing productivity
and extending cutter life. Cutters are made
with steel shafts and durable carbide milling
balls for maximum capacity cutting. All cutters
may be resharpened up to five times using
Gerber Coburn’s re-sharpening program.
157072 Three Flute Cutter
204481 Eleven Flute Cutter
248511 Nine Flute Cutter
Polycrystalline Diamond Cutter for
Lensmaker™ SL2
Coburn
Door Hinge P/N 44161-00
Flat Panel Display
OWC
CR Driver Relay
OWC
A Axixs Servo Motor Analog 11561-00
CR Drive Relay P/N 10507-00
A Axis Servo Motor Digital
OWC
Single point diamond cutter processes hard
resin, polycarbonate and high index lenses to
create extremely smooth surface finishes.
Cutter Boot
OWC
Flat Panel Display
Lm P/N 11548-00
SL2 P/N 44518-00
Foot Switch
OWC
11262-00
A Axis Encoder Home cable
Assembly
OWC
Axis Servo Motor- Digital
LM P/N 13068-00
Cutter Boot P/N 44908-00
SL2 P/N 11636-00
Home Cable Axis encoder P/N 44551-13
Actuator
OWC
Diamond Cutter
OWC
Foot Switch P/N 18495-00
Generator Pump
OWC
Home Cable Axis encoder P/N 44551-14
A Axis Linear Ball slide
OWC
X Axis Linear Ball Slide
LM P/N 11578-00
Actuator P/N 8503-00
Replacement Parts - P/N N90855 two-flute Replacement Parts - P/N 6273 generator
diamond cutter for 3G model generators.
pump - also available in 220 volts P/N 6273-01
10/12/11 11:08 AM
GENERATORS
70
Load Door
Relay Socket
SGX Diamond Cutter
OWC
OWC
OWC
Generator Parts
Hood Support Cylinder
OWC
Hood Support Cylinder
P/N 10896-00
Insert Clamp
OWC
Load Door
Relay Socket P/N 12411-00
LM P/N 44089-00
Replacement Parts - P/N 204481 SGX cutter,
11 flute.
Swarf Hood Flange
OWC
Replacement Parts for SGX
SL2 P/N 44510-00
Generator
Load Door Cylinder
OWC
OWC
Insert Clamp P/N 44498-00
Lead Screw end Bearings
OWC
Load Door Cylinder
Swarf Hood Flange P/N 44888-00
LM P/N 10891-00
SL2 P/N 12327
Magna Scale and Detector Assy
OWC
Tool Bar
Spindle motor pulley S/N 137103-01
OWC
Spindle motor shaft S/N 137103-02
SGX Ball Cutter
OWC
Tool Bar P/N 44909-00
Lead Scew End Bearings P/N 11575-00
Top Door Swarf Hood
OWC
Light Assembly
OWC
Magna Scale and Detector Assy
P.N 138582
P/N 44582-00
Power Supply
SGX Cutter Motor
OWC
OWC
Light Assembly P/N 11102-00
Top Door Swarf Hood P/N 44571-00
Limit Switch
Bottom Door Swarf Hood P/N 44572-00
OWC
Way Cover
OWC
SGX cutter motor
P/N 137103.01 less pulley
Power Supply P/N 13190-00
Limit Switch P/N 8504-00
Probe Assembly and Probe tip
OWC
P/N 204539-01 less pulley and belt
SGX Cutter Motor Brush
OWC
Limit Switch Assembly
Way Cover P/N 44188-01
X Axis Ball Lead Screw
OWC
OWC
“X” limit switch assembly P/N 44551-01
Probe Assembly P/N 44198-01
“Y” limit switch assembly P/N 44551-03
LM P/N 11574-00
Probe Tip P/N 44262-00
P/N 134721
SL2 P/N 11635-00
X Axis Ball Lead Screw
SGX AC motor brush
10/12/11 11:08 AM
GENERATORS
Cutter Blades
Generator Parts
PSI
C130-CMV Automatic Sphere
Generator Replacement Parts
Sentilles
X Servo Motors
71
•Select front mold
•Select back mold
•Select gasket
•Count mold usage
OWC
•Measure distance between front/back
•Ability to generate PO based on certain criterion for consumables
•Ability to print out and/or send POs electronically
•3 million data combinations
X Servo Motor
Anolog P/N 11585-00
Look to PSI for replacement parts for your
surfacing equipment. Polycrystalline diamond
cutter for Gerber IQ precision turning lathes
including the IQ CNC Lensmaker XRT and the
IQ SL2 #103
Digital P/N 278381
3-flute, tapered cutter for Optronics Vista 2G
generator. #107
Y axis Ball Lead Screw
Cutter Tips for Loh V-Series
OWC
Generators
All replacement parts for your CMVC130 team and contact information at www.optivisphere generator are available. Refer to your sion.com or call 800.795.9927 now!
OEM manual for part numbers or call for
Space Saving Surfacing Module
assistance. Parts manual also available.
OWC
Coolant Seal-390
Sentilles
PSI
Replacement part for LM SRT/SL2
Y Axis Linear Ball Slide
OWC
Easy change cutter tips for the Loh V-Series
Generators. Last up to 60,000 surfaces with
high stock removal. Used for processing all
plastic lens materials, including polycarbonate. Blades are retrueable.
Complete module occupies less than 12
square feet of floor space and is capable of
processing all plastic lens materials. Includes:
surfacing software, layout device, surface
saver applicator, non-alloy blocker, 3-axis
Our 1/8”-thick rubber, double cord reinforced
generator, FPZ-2 cylinder surfacer, chiller,
coolant seal for coolant chamber Shuron gen“quiet” compressor, small lap set, 3 drawers
erator 290, 390 or 490.
for lens and lap storage. Curves: +6.00 to
390-08087
-28.00 diopters (unlimited Rx range). Prism: to
20.00 diopters, including ability to cut matchShuron/CMV 290-390-490 Generator ing lap. Capacity: 40 plus pairs per shift.
Weight: 1075lbs. Electrical: 115V, 60 cycle, 1
Parts
Phase. Requires 2-20 amp 115V circuits.
Sentilles
Specs: 62”h x 48”w x 36”d.
135
Y Axis Linear Ball Slide 11577
Manual Toric Generators
390 Chucks - Manual
Model 108CT Generator-Rebuilt
Sentilles
Optical Machinery
Y Axis Motor SL2
OWC
Replacement parts for Shuron/CMV/TMI versions of the 290 and 390 generators available.
To order, use the part number in your OEM
manual or call for assistance.
Spring Negator-390, 490 & 790
Generator
Y Axis Motor SL2 P/N 11637-00
Y Servo Motor
OWC
Sentilles
Manual chuck for Shuron/CMV 390 Generator
available with collet to accept Coburn blocks,
1/4 turn locking lever, and ball-end. To order
specify 390-08580-Manual Chuck-Shuron/
CMV for Coburn Block. Also available: rebuilt
chucks and parts to rebuild your chuck. Other
replacement parts also available for generators. Just specify part number by referencing
your OEM manual or call for assistance.
OM-108CT-RB
390-08580
Belts for Generators & Surfacers
Sentilles
The 108CT generator is ideal for the smaller
laboratory. It’s simplicity and wide curve range
provide all-around utility. Self-contained coolant system; curve range plano–20.00 diopters
minus only; manual curve setting; manual
sweep; glass or CR-39®-type; air/hydraulic
chucking; finish center thickness. 220 VAC,
60Hz., 10A.
Finest quality rolled stainless steel negators
for your 390, 490 or 790 generator grinding
chamber.
OM-1008 Model 1008 GeneratorRebuilt
Optical Machinery
390- 08082
Lenscasters
Y Servo Motor
Optivision® Casting Manager™
Optivision®
Anolog P/N 11562-00
Digital P/N 11637-00
Belts for generators, surfacers, cylinder
machines available by referencing your OEM
Precision Retruing Services
documentation part number or call for assisPrecision Tool
tance. Popular models listed below.
A software solution for casting lens Rx, the
108-09554 Coburn 108
Optivision® Casting Manager™ software proRetrue our 3-flute cutters. Retrue lap tools— 108-09554 Coburn 113
gram has a screen layout and data input that
aluminum, plastic, or cast iron. Concave or 390-08456 Shuron/CMV/TMI 390
includes:
88-4580 Shuron/CMV/TMI 88
convex.
•Enter Rx
Designed for the smaller lab, the 1008 generator is manually operated to grind lenses with a
small footprint; with the proper diamond
wheel, you can grind glass, plastic, high index
and/or polycarbonate; curve range = -2.50 to
-20.0 D Base and -0 to -20.0 D Cross; features
center thickness control, prism ring and tray
racks; lower profile for easier access and a
safety cuff around the grinding chamber. 220
volt, 1-phase; 850 lb.
10/12/11 11:08 AM
72
GENERATORS
Prism Rings (43 mm X 50 mm)
Manual Toric Generators
W2113 RC Toric Generator
Semi-Automatic Toric Generators
Sentilles
1008 RC Generator
OWC
108RB Toric Generator
OWC
OWC
Computer interfaceable for base and cross
curve setting. Digital keyboard input for
curves and adjustments. Can be used for all
types of lens materials. 65”h x 63”w x 31”d
(165cm x 161cm x 79cm). 1,500lbs. (680kg).
220V, single phase, 15A. Air required.
Stainless steel prism rings with clearly etched
size and access positioning mark. Range 0.1
Ideal generator for small labs on a budget. D steps to 1.0 D and 0.25D thru 6.0 D in 0.25
Simple to set up and operate. Center thick- steps. Also Plano 0.25 & 0.75. Part # 99-33SS
ness control and smaller footprint than the Prism Ring-Complete set 33 (order each-add
Ideal for the smaller lab, and as a backup or Contact OWC for current pricing.
108 generator. Requires air.
Power # to part #).
additional unit for the larger lab. Its simplicity
Weight: 850 lbs (385 kg) Specs: 66” (168cm) h Contact Sentilles for current pricing.
x 53” (135cm) w x 20” (71cm) d
and wide curve range provide all- round utility
CG-1 Generator
Semi-Automatic Sphere
Generators
OWC
as well as good production capabilities.
Features include: oil or water-based coolant,
self-contained coolant system, curve range
VFT-orbit
plano through 20.00 diopters on cross curve
Satisloh
(+/–), curve range 2.75 through 20.00 diopters
on base curve (+/–), manual curve control setting, manual sweep and back cut control, can
be used on glass or CR-39, easy diamond
alignment verification and air over hydraulic
chucking for more positive clamping. 57”h x
41”w x 25”d (144.8cm x 104cm x 63.5cm).
Center thickness – easy to set curves. Range
1,250lb (567kg). 115V AC, 60Hz, 1 phase, 14A.
from 2.50 to 20.00 (minus only). Hood accomOthers available.
modates lenses over 100mm. Can use diaContact OWC for current pricing.
monds from 2” to 4-1/2”. Unique design to
minimize floor space requirements. 60”h x
CG-1S Curve Generator
24”d x 40”l. 1,200lb. 110V, 60 cyl. 20A. Other VFT-orbit combines the proven core compovoltages are available. Patent pending.
OWC
nents from the VFT-ultra series with a radical
W108 CT Manual Generator
OWC
new approach to moving the various axes of
lens
and
tools
called
Circumvolution
Technology. The various work stations for
tools and lens loading are arranged in an
orbital shape around a central rotating lens
axis. This arrangement enabled our engineers
to design a single point turning generator with
numerous benefits. All presently known lens
formats and organic lens materials can be
generated. The VFT-orbit is also available as
the VFT-orbit-L and VFT-orbit-M.
A manual lens generator with center thickness
control. Air over oil chuck. Proven design for
low production of all types of lens materials.
60”h x 56”w x 28”d (152cm x 142cm x 71cm).
1050lbs. (472kg). 220V, 15A.
Provides for finished center thickness setting
with both base and cross curve slides motor-
ized; range 2.50 to 20.00 (minus only). Will
VFT-orbit
accommodate 100mm lens and all diamond
Satisloh
sizes. 60”h x 24”d x 40”l. 1,100lb. 100V, 60 cyl,
20A. Other voltages available.
Prism Rings
W113MX RC “Manual Matic”
Generator
Precision’s Cabinet-Style Prism Ring
Holder
OWC
Precision Tool
VFT-orbit combines the proven core components from the VFT-ultra series with a radical
new approach to moving the various axes of
lens
and
tools
called
Circumvolution
Technology. The various work stations for
Very efficient and safe way to store your prism
rings. 20 slots, constructed of high-quality
stainless steel. Can be placed on a flat chiller
plate or has a back mounted chiller plate
available. Chiller plates are anodized and have
coolant flow control valves for precise temperature control. Cabinet Style Prism Ring
Holder. Back Chiller Plate. 10” x 12” Flat
Chiller Plate.
tools and lens loading are arranged in an Reliable semi-automatic generator capable of
orbital shape around a central rotating lens up to 60 lenses per hour. Large bellows hood
the VFT-orbit-L and VFT-orbit-M.
axis. This arrangement enabled our engineers accommodates all blank sizes. Automatic dial
to design a single point turning generator with setting of base and cross curves with center
numerous benefits. All presently known lens thickness control at the tailstock. 65”h x 58”w
formats and organic lens materials can be x 29”d (165cm x 147cm x 74cm). 1,650lbs.
generated. The VFT-orbit is also available as (750kg). 220V, single phase, 15A.
10/12/11 11:08 AM
LENS COATING
Coating Equipment
HRC-180 Backside Coater
Coburn
x 813mm. 385 lbs. 208V (min.) 240V (max), time durability and superior day to day perfor50/60Hz, 20amps, 1 phase, air 80psi at 5CFM. mance. The large padded center assures
Unit also requires compressed nitrogen.
maximum lens protection. Available in regular
80mm diameter, large 90mm diameter, or
UO-1022 Mini II S/R Coating System custom designed for any ring manufacture
that you are currently using.
Optical Machinery
73
lenses. The double micro bearings allow
smooth opening of springs. Available in just
about any ring size you need.
Double-Up AR Ring Holder
Precision Tool
3 or 4 Spring AR Ring Unloader
Precision Tool
The HRC-180 Backside Coater is a self-contained, fully automated system for the application of high-performance, scratch resistant
coating to all types of plastic and polycarbonate lenses. HRC-180 uses an advanced coating technology called 100% Solids, which
allows complete utilization of the coating,
eliminating volatile solvents and waste.
Compact, easy to use reliable system for
applying scratch-resistant coating to organic
lenses; patented, solvent free UV-cure coating
works on ALL organic lens types; quickly tints
to a #3 shade - even polycarbonate. Coating
unit: 115 / 230 volt, 60 Hz; 25” x 20” x 23”; 75
lbs, requires ‘shop’ air supply. Cure Unit: 115 /
230 volt, 60 Hz; 16” x 26” x 16”; 75 lbs,
requires ‘shop’ air supply.
The integrated system automatically cleans, Contact Optical Machinery for current pricing.
coats, and cures lenses in one quick, uninterUO-MRIII Scratch Resistant Coating
rupted cycle, eliminating exposure to dust and
System
dirt, minimizing lens handling, and bypassing
lens inspection prior to the curing phase. With
Optical Machinery
this process, labs gain increased throughput
and consistently high yields
Power
208 V (minimum)
240 V (maximum)
Tired of searching for the right lens unloader?
Not any more with our new combination 3 or 4
spring ring lens unloader. Unloading the lens
has never been so simple with Precision Tool
Technologies drop through design, you don’t
have to worry about the spring teeth scratching the lens. If you are using 3-spring and
4-spring rings in your coating center, you will
love our new combination 3 or 4 spring ring
loaders and unloaders. Made from anodized
aircraft aluminum, stainless steel rollers and
bearings. Precision Zeiss style A/R ring
unloaders are engineered for lifetime durability and superior day to day performance. The
large center cut out works great on edged
lenses. Available in regular 80mm diameter,
large 90mm diameter, or custom designed for
any ring manufacturer that you are currently
using.
Anti-Reflective Coater Rings
50 or 60 Hz, 15 Amps, single phase dedicated
circuit
Precision Tool
New Precision Zeiss style anti-reflective double-up coater ring. Load two lens per ring.
Double-up on capacity and production. Keep
pairs together. Save on consumables.
Hand-Held AR Spreader
Precision Tool
The Hand-Held AR Spreader is designed for
lightness and excellent hand feel. Available in
three or four spring configuration, it can hold
most any size ring you are using. Enjoy the
ease of double-bearing spring activation.
Air Requirements
Carbon Core Pre-Filter
80 psi machine operating pressure, 5 or 10
The MRIII is an easy to operate, all in one
CFM
coating system; clean, coat and cure system
Dimensions
capable of 1000 lenses in an 8-hour shift; no
special water, chemicals, gases or ‘clean
34” (w) x 35” (d) x 72” (h)
room’ environment needed; uses patented,
863 mm x 889 mm x 1829 mm
solvent-free hard coat that adheres to all lens
materials; tints to a neutral #3 shade; certified
Weight
by 38 AR labs. 115 volt / 20 amps. 80”h x 28”w
375 lbs/170 kg
x 30”d. 645 lbs.
Water
Optivision® AR Order Entry™
de-ionized water
Optivision®
Order No.
261919, 60 Hz
269749, 50 Hz
PSI
Precision Tool’s AR rings are specifically engineered for durability and trouble-free lens
holding. Rings are available in a large array of
sizes, configuration, flex arm tension, and tip
types to suit every type of coater and lens. 10”, 5 micron carbon core-pre-filter. Equivalent
Our rings will hold everything from the small- to Gerber Coburn’s part #833431-00 for the
est finished lenses to the largest glass lenses. Lenscoater.
Item #1180 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.25
Stratum™ Lens Coating System
AR Ring Holder
Deionizer Cartridge
Coburn
Precision Tool
PSI
The Optivision® AR Order Entry™ program is
a simplified, scaled-down version of the full
Optivision®
Laboratory
Management
System™ lab system with a customized front
end to accommodate anti-reflective coating
labs, suited to be comprehensive and affordable, to enter data, print envelopes with barThe Stratum Lens Coating System is a com- codes, invoice and maintain jobs that pertain Made of heavy gauge stainless steel, this
stand (5” x 12”) will hold up to 40 rings. The
pact, automated backside coating machine to anti-reflective coating job processing.
for plastic and polycarbonate lenses. Find more about Optivision® products, our solid bar design prevents springs from tanStratum’s integrated process cleans, coats team and contact information at www.optivi- gling.
and cures a pair of lenses with minimal opera- sion.com or call 800.795.9927 now!
tor involvement. It has been specifically
AR Ring Spreader
3 or 4 Spring AR Ring Loader
designed for in-office surfacing customers,
Precision Tool
Precision Tool
and small-to-medium wholesale customers.
Operators simply load a pair of lenses in a
carousel tray and unload them at the end of a
2-1/2 minute cycle. Hands-free operation
allows Stratum operators to perform other
tasks while the lenses are processed. Totally
self-contained and automated, a Stratum Tired of searching for the right lens loader?
Lens Coating System can be located in a Not any more with our new combination 3 or 4
normal laboratory environment, without need spring ring lens loader. Loading the lens has
for a clean room. Stratum is available in two never been so simple and you don’t need difconfigurations: Stratum, which dispenses a ferent loaders if you are using 3-spring and
single coating type; and Stratum 2D, which 4-spring rings in your coating center. Made
offers the same benefits as Stratum, plus the from anodized aircraft aluminum, stainless Available for either 3 or 4 spring configuration,
capability to dispense an additional coating. steel rollers and bearings. Precision Zeiss the Precision Tool Aluminum Spreader allows
22-1/2”h x 37-1/4”w x 32”d. 546mm x 946mm style A/R ring loaders are engineered for life- safe loading and unloading or your valuable
073-082_SF1110_LensCoating.indd 73
Mixed Bed Deionizer Cartridge. Equivalent to
Gerber Coburn’s part #83432-00 for the
Lenscoater.
1179 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $55.68
G4 Dip Coating
Satisloh
Scratch resistance coating with integrated
steam cleaning. It processes up to 110 jobs/
hour; reduces labor costs and only requires
one operator. The steam eliminates handcleaning. Excellent AR compatibility
10/12/11 11:09 AM
74
LENS COATING
CNC w/QC3 Reconditioned
Coating and IPA Filters 0.2 Micron
HEPA Filter
Sentilles
Sentilles
Sentilles
Coating Equipment
Magna Spin
Satisloh
Completely reconditioned, calibrated, and
ready for use. Choose from side by side
operation (pictured) or stack system which Absolute replacement filters for filtration of
coatings and isopropyl alcohol for the highest
reduces table or floor space.
levels of purity demanded by today’s coating
Semi-automatic hard coating system with two
field. Suction cups and replacement parts
lacquers. Processes 2 lenses / minute using a
COATING AND CURE SYSTEM
available for your coating unit.
magnetic driven rotation system that provides
Sentilles
a low friction point with less wear on motors
35-4001 0.2 Micron IPA Filter, Clear
and spin mechanisms
35-4002 0.2 Micron Coating Filter, Black
Coburn Clean Air Booth. Replacement clean
air filter (HEPA) for top of Coburn stack coating unit. Consistent specking problems on
coated lenses could indicate need to replace
your clean air HEPA filter. Specify part number
from OEM manual or call for assistance.
30-0306-2430
HEPA Filter (ACU2)
Satisloh MC 380
Sentilles
COATING AUTOMATED SimplicityTM
Satisloh
Sentilles
High vacuum anti-reflection coating system
combining the ultra-sonic cleaning de-gassing and coating into one compact unit.
Through put 48 lenses in 55 minutes. The
unique turning mechanism makes it possible
to coat each layer on both sides of the lens
before advancing to the next layer.
1.2 Micron Coating Filter
Sentilles
Replacement filter for absolute 1.2 micron filtration of coating for the highest level of purity
demanded by today’s coating field. Coating
flow problems may indicate a clogged filter
and need for replacement.
35-4112
Bulbs for Coating UV Core Equipment
Sentilles
Bulbs for coating equipment. Reference OEM
manual or call for assistance. Popular bulbs
listed.
100-50 Modern ARC Inspection 50W bulb
100-92 Modern ARC Inspection Lamp 100W bulb
33-40010 COBURN/LTI QC-I & GX-III Inspection Lamp.
Center Finder for CNC Target
Sentilles
The Clean ‘n’ Coat Model #1000-coating unit
is a spin coating system along with the Quick
Cure III UV Curing System. Each lens is automatically cleaned with pressurized Isopropyl
Alcohol, spun dry, then coating is spin applied
evenly across substrate surface, complete
PLC controlled cycle time is 60 seconds per
lens. Lens is now ready to be placed in QCII
UV curing unit. Unit is equipped with two
coating tanks with point of use filtration to 0.2
microns. Complete reconditioning includes
new motors, new solenoids, new tubing and
supply lines. Units are completely stripped
repainted, reassembled, adjusted to correct
operating parameters and lenses are coated
in the system to GUARANTEE “spec free”
lenses and coating performance before shipping. Quick Cure III UV cure unit Cures one
lens per cycle. Three different cure cycles
available. Curing time is 6 to 60 seconds
depending on coating used. Unit requires
venting to outside wall. Unit is completely
repainted, new UV LAMP, rebuilt, recalibrated
and reconditioned.A vertical clean air Stack
Cabinet with a blower forcing air through a
HEPA Filter producing positive laminar airflow
to shield lens from dust particles and outside
air contaminates. The protected working area
eliminates the need and expense of a clean
room environment. Cabinet footprint is 37” x
30”, And in mounted on casters for easy
mobility and accessibility. This cabinet houses a CNC coating unit above and QC III cure
unit below.
Original equipment replacement HEPA filters
for the Clean Air System on ACU2 equipment.
Clean HEPA filters provide a clean air environAutomatically cleans, coats and cures via ment, which is essential in lens coating and
computer-controlled process. Load lens the curing process.
75-7218
system atuomatically washes lens with high Contact Sentilles for current pricing.
pressure H2O cleaning, then transfers clean
HEPA® Filter for LC3 IQ Lenscoater
lens to coating bowl for application of ALLSentilles
LENSTM NV UV curable coating, then the lens
is automatically cured. Available with your
choice of single spindle or dual spindle. Cycle
time 45 seconds per lens for the single spindle
system. Cycle time 30 seconds for the twospindle system. ALL-LENSTM NV UV-4500 UV
cure hardcoat tintable backside coating.
Provides improved abrasion resistance and
sunglass tintability with full adhesion and AR Replacement air filter for the Gerber Coburn
compatibility for polycarbonate, high-index Lenscoater. Consistent specking problems on
and hard resin lenses. Our 6 Oz. Bottle will coated lenses could indicate need to replace
your clean air HEPA® filter.
coat approximately 3800 lens
38-12368000
Specifications: - Weight: 80 lbs, Size:23 w x Contact Sentilles for current pricing.
Lens Dry Additive
20 d x 22 h,
Requirements: shop air 80 psi
Electric: 110 vac, 15 amp
Specifications: - Weight: 80 lbs, Size:23 w x
20 d x 22 h,
Requirements: shop air 80 psi
Electric: 110 vac, 15 amp
Part # 35-6001 SimplicityTM
COATING SYSTEM single
AUTOMATED
Electrics 120VAC
Total Weight 475 Lbs. Part # 35-6002 SimplicityTM
ALSO SEE COATING UNIT DualityTM
COATING SYSTEM dual
AUTOMATED
30-3030-1620
Pre-Filter for Stack Unit Blower
32-8338
32-8338 Valance SA only 13.5 x 30” for stack unit front
Clean Air Stack Cabinet SA–Coburn / LTI –
Reconditioned
32-83318-R
CNC COATER
Reconditioned
-
COBURN
/
LTI
–
LTI
–
Sentilles
Filters-HEPA’s and Pre-Filters
Sentilles
Lens dry additive for the Gerber Coburn
Lenscoater. Lens dry additive is added every
time you refill de-ionized water container. 1
pint/16oz.
1-83427
Lens Holder Adaptor for LC3 Coater
Sentilles
35-01-R
QC III CURE UNIT-COBURN
Reconditioned
Use center finder to align target center with 33-01-R
motor shaft and CNC nozzle head. Proper
Replacement Parts#
alignment eliminates targeting aberrations of
30-0306-2340
coating in lens center.
35-4149
HEPA Filter 99.99% Replacement for Stack unit
/
Filters for most clean-air filtration systems in
the industry. Specify part number from OEM
manual or call for assistance.
Lens holder adaptor provides secure grip of
suction cup and lens. Special grooves reduce
10/12/11 11:09 AM
LENS COATING
dismount in LC3 coater and increase yield. This high production carousel UV cure unit,
Suction cups and magnets also available.
cures up to 4 pair per minute. Unit will accom35-4040 Magnet
modate two CNC” coating units with one
35-4041 Suction Cup, Large
operator. Unit is Refurbished, painted and
35-4042 Suction Cup, Medium
35-4043 Suction Cup, Small
calibrated ready to place on line.
Requires
38-008 Lens Holder Adaptor replaces
exhausting to an outside wall.
8369201 LC3
75
UV CURE COATING 455 TINTABLE
Water Filter Lenscoater 3/EX
Sentilles
Sentilles
QC I Cure Cabinet 17Hx19 Wx19 D Electrics
Mini II NV w/Cure Unit Reconditioned 110 VAC Weight: 45 lbs.
Sentilles
Fusion Super Six Power Pack Electrics: 220
VAC Weight 70 Lbs.
# 31-0-R
QC I Cure cabinet w/Super Six
Power Pack– Reconditioned
455 TINTABLE UV CURE COATING (replaces Pre-flushed high purity De-ionized water filter
Price Call 800-868-9749
HT-450 coating). Replace HT-450 with our 455 for Coburn Lenscoater 3/EX. Direct replaceContact Sentilles for current pricing.
Reflector Kits for Cure Units
Sentilles
Completely reconditioned, calibrated, and
ready for use with solvent-free coatings. Part
# 39-5R.
Abrasion Resistant UV Curable Backside
ment for Coburns part #1739201 Sentilles
Coating.
Optical Part #38-1739201.
Provides excellent abrasion resistance and Contact Sentilles for current pricing.
sunglass tintability with 100% adhesion.
1-4455-016 16 OZ BOTTLE
Coating Supplies
Mini II w/Cure Unit Reconditioned
UV Lamp Holder QC3 Retrofit Kit
BPI® PC Edge Coat™
Sentilles
Sentilles
BPI
Replacement reflectors available for most UV
cure units in ophthalmic and industrial curing
applications. Also custom reflectors designed
and produced to your specifications.Specify
manufacturer and model for other units.
31-42301 QC-I/Fusion 200/Fusion 300 Power Pack
Completely reconditioned, calibrated, and Reflector Kit
33-10690 QC-III Reflector Kit
ready for use. Part # 39-2R.
Motors for Coating Units
Target Replacement
Sentilles
Sentilles
Replaces original lamp holder and reflector Pastel edge tints for rimless lenses, Available
with a more accurate, easy-to-change bulb colors: Blue, gray, brown, yellow, green, red.
bracket and reflector. Prevents bending of # 42509 Gray
lamp holder. Prevents changing focal point of # 42510 Brown
reflector and UV light every time you change a Contact BPI for current pricing.
bulb. Increases curing efficiency.
BPI® Ultra Gray™ & BPI® Ultra
33-40100
Brown™
UV Lamp Ultra Replacement
Old and new style target replacement for the
CNC coating machine. Target provides accuReplacement motors available for most coat- rate nozzle adjustments to ensure exact spray
ing units on the market. Specify coating unit of IPA solution and coating to center of lens.
model. Pictured are:
35-4133 Old Style Target (with hangers)
35-4018 Lens spin motor for CNC or Optical
Innovations
35-4019 Nozzle head motor for CNC
Motors for Cure Units
Sentilles
BPI
Sentilles
35-4144 New Style Target (with 2 holes)
UV Bulb Lenscoater 3 and Hypercure
Unit
Sentilles
Superior quality, fast tinting and long lasting.
UV Lamp replacement for Ultra cure units. The unique chemical structure of this tint
Always have a backup UV lamp on the shelf makes it more stable and reduces tinting
and ready to install. UV Lamp only with instal- times. The BPI® Ultra Gray™ and BPI® Ultra
lation and counter reset instructions.
Brown™ tints produces true gray and brown
Replacement UV bulb for LC3 UV bulb assem- 38-025
bly tray.
on the Ultra Optic™ lenses.
38-12739 replaces LC3 part number 1273900
# 31106 Gray
Replacement motors available for most UV
Cure Units on the market. Specify unit model. Contact Sentilles for current pricing.
Pictured are:
UV Bulbs QCI & QCIII
31-01001 Motor Turntable QC-I
31-01002 Motor knock-off wheel QC-I
33-40015 Motor lens drive for QC-III
UV METER - SURE SCAN
Sentilles
# 31107 Brown
Touch of Tint
Sentilles
BPI
QUICK CURE I
Sentilles
LTI QUICK CURE I UV CURE UNIT
With FUSION SUPER SIX POWER PACK
Easy to use digital unit measures either uv
UV replacement bulbs for cure units. Call and light 360 to 400 nm or visible light transmisspecify your coating and cure unit. Bulbs
sion. Auto calibration and display hold feature
available for most units on the market today.
for easy operation. Read lens in or out of Pens that apply a pastel tint to the edges of
31-40122 UV Bulb QC-I
rimless lenses.
frame. 115 V
33-10698S UV Bulb-QCIII
10/12/11 11:09 AM
LENS COATING
76
Coating Supplies
HT-1000 UNIVERSAL TINTABLE
COATING
Armour-500 has an abrasion rating of 7.5 and Contact Coburn for current pricing.
has excellent compatibility with the A/R proLTI HT-825 HYPERTINT ABRASIONcess.
285941
RESISTANT COATING
Coburn
(OLA).
99-AO
All Off Marking Ink Remover 4 oz
Coburn/LTI HT-2000™ Coating
Coburn
Coburn
OptiSource
Abrasion-resistant coating for the backsides
of polycarbonate lenses. Provides 49% hardcoat tintability after 15 minutes, and 33%
sunglass tintability after 15 minutes. Abrasion
resistance is 5.0 for hardcoat and 4.0 for sunglass. HT-825 is compatible with all A/R processes. One-pint bottles.
HT-2000™ tintable polycarbonate coating is
designed for use in Coburn’s LensCoater3.
HT-2000 is highly tintable, providing 30%
transmission in 10 minutes. It has an abrasion
resistance rating of 5.5 and ensures excellent
8343800
adhesion and durability even for the most
aggressive A/R process. 100ml smart carLTI Sun 150 Tintable Coating
tridges.
83430-00
Coburn/LTI HT-450 Abrasion
Resistant Coating for Polycarbonate
HT-1000 is a versatile, all material backside
coating (except glass). HT-1000 provides 30%
transmission on hi-index in 15 minutes and
Coburn
35% transmission on polycarbonate in 15
minutes. It has an abrasion resistant rating of Abrasion-resistant backside coating for poly4.5 and is compatible with A/R processes.
carbonate lenses. Gives improved scratch
8336800
resistance and full sunglass tintability with
superior adhesion. One-pint bottles.
LTI HT-850 POLYCARBONATE
TINTABLE COATING
Coburn
83366-00
Coburn/LTI HT-550B Abrasion
Resistant Backside Coating
Coburn
Sun 150 is designed for use in Coburn’s
Stratum Lens Coating System. This solventless coating works on polycarbonate, high
index, and CR-39. Sun 150 is tintable to Gray
3 in 15 minutes and has an abrasion rating of
5.5. Sun 150 is compatible with A/R processes.
285931
LTI SUN-400B POLY TINTABLE
COATING
Coburn
Coburn
The All Off Marking Ink Remover is safer than
caustic Acetone and will never ruin a
Polycarbonate Lens. It instantly dissolves and
removes any progressive ink markings with
the industry’s most widely used solution.
Simply apply with a swab, cloth or even dip
into solution for 2 seconds. All Off Marking Ink
Remover is used by more labs than any other
marking ink remover in the world. All Off is our
customers’ choice for ink removal and it is no
wonder why it is the winner of the OPTICAL
Laboratories Association Award of Excellence.
99-AO4
Abrasion-resistant coating for the backsides
of high index and hard resin lenses. Gives
improved scratch resistance and full sunglass
tintability with superior adhesion. One-pint
bottles.
All Off Pen
OptiSource
83442-00
HT-850 is an abrasion-resistant coating formulated to provide excellent hardness, durability, and tintability for polycarbonate lenses.
One-pint bottles.
257571
Coating/IPA Filter
Coburn
Coburn/LTI SHC-125 Hyper
Tint™Abrasion Resistant Coating
Coburn
Super-hard, non-tintable, scratch-resistant 285951
coating for CR-39 material provides superior Contact Coburn for current pricing.
scratch resistance for convex or concave
Polysafe AR Coating Remover
surfaces, including bifocals. One-pint bottles
Dynamic Labs, Inc.
1.45lb–1.7lb when packaged with absorbent.
83374-00
Disposable “pre-flushed” coating and IPA fil- Contact Coburn for current pricing.
tration unit utilized in the Coburn/LTI Clean-NCoburn/LTI SHC-3000™
Coat machine to ensure speck-free lenses.
83034-00
Coburn
SHC-3000 Super Hard Coating for all materials is the coating of choice for anti-reflective
processing. Although non-tintable, SHC-3000
provides a very hard, very stable substrate
CR Scrub is a special cleaning and micro- that enhances adhesion and durability for
abrading solution formulated to prepare hard anti-reflective coatings. 70ml smart cartridgresin and high index lenses for coating.
es.
CR Scrub
Coburn
83373-00 Kit
Sun-400B is designed for use in Coburn’s
Stratum Lens Coating System. The coating is
poly tintable and sold in 12-oz bottles.
83424-00
CR Scrub Application Sponges
Coburn/LTI SHC-3100 Coating
Coburn
Coburn
It’s here! The ALL OFF PEN is in stock. The
pen is aluminum with a step down design to
hold the cap. The tip is a compressed fiber,
shaped like a pencil tip. All Off will remove
markings from approximately 100 lenses. The
unique valve-action mechanism dispenses All
Off to the ink absorbing tip. Simply press
down and rub away the most stubborn ink
markings in just seconds. Cleaning with cloths
or wipes is not necessary. Enjoy our BEST
selling All Off progressive marking ink remover
Recently nominated for the OLA Award of in this EASY-to-use pen. *Replacement tips
Excellence! Anti-Reflective stripper is safe on are available if needed.
polycarbonate, High-Index and CR-39 lenses.
99-AOP
Easy to use. Removes coatings in just 30-45
seconds. No mixing and no pouring. Not bio- Contact OptiSource for current pricing.
degradable and not for glass lenses.. . . $64.95
AR Remover
bulk pricing available
OptiSource
Applicator sponges that are pre-cut from SHC-3100 Super Hard Coating for all materi- Contact Dynamic Labs, Inc. for current pricing.
selected material to provide a handy means to als is the foundation coating of choice for any
All Off Marking Ink Remover 16 oz
apply CR scrub to lenses. 10/pkg.
A/R process especially sputter processes.
OptiSource
83375-00
SHC-3100 is non-tintable with an abrasionContact Coburn for current pricing.
resistant rating of 8.0 on polycarbonate and
high index lenses.
GC-130
Coburn
GC-130 has been devoloped to work with
Coburn’s HRC-180 Coater. The abrasion
resistant coating is designed for use on all
lens materials, CR-39, Hi-Index, polycarbonate lenses. GC-130 has an abrasion resistance of 1.21 (tintable), AR compatable, and
12 microns in thinckness. It is offered in a 150
mL bottle.
Part # 285323
Coburn/LTI Armour-500 Coating
Coburn
Armour-500 is designed for use in Coburn’s
Stratum Lens Coating System. This solventless coating is non-tintable and works on
polycarbonate, high index, and CR-39.
83441-00
Hyper Clean™ Tissues
Coburn
Specially selected “Lint-free” tissues for use
when cleaning lenses to be coated or dyed in
order to provide a “Speck-Free” surface. 30
boxes.
Instantly dissolve and remove any progressive
83207-00
ink markings with the industry’s most widely
used solution. All Off Marking Ink Remover is
Isopropyl Alcohol
safer than caustic Acetone and will never ruin
Polycarbonate Lenses. Simply apply with a
Coburn
swab, cloth or even dip into solution for 2
Purified and filtered to exceedingly high stan- seconds. All Off Marking Ink Remover is our
dards, recommended for use with the Coburn/ customer’s choice for ink removal. It is used
LTI coating system. Use of substitutes may by more labs than any other marking ink
All Off Marking Ink
jeopardize the abrasion resistance and dura- remover in the world.
Remover is the winner of the OPTICAL
bility of a coated lens. One gallon.
Laboratories Association Award of Excellence
83206-00
With AR coatings becoming more popular, it’s
important that all opticians are equipped with
AR Remover, to remove these coatings from
time-to-time. Thanks to the Research and
Development team at OptiSource, now there’s
a convenient 10-second to 3-minute in-house
removal process. So SAVE time, improve your
service, and never send your valuable customers away without their glasses again!. No
SPECIAL machinery, tools or training required.
99-ARQ
10/12/11 11:09 AM
LENS COATING
Clean & Clear UV
Coating Supplies
OptiSource
AR Remover
OptiSource
77
and dye neutralizing for when dye accidentally spills down into the HTF. It is the slowest
evaporating chemical known to man. Heat
Transfer Fluid is completely odorless and
biodegradable, making it safe for the user and
the environment. Use OptiSource’s OAA
award-winning HTF to protect and prolong the
life of your expensive tint unit today. It’s the
perfect preventive maintenance solution for
any machine and every operation. *Change
HTF every 6 months for optimal performance.
*Ask about our FREE $30 Syphon Pump that
makes change-outs so clean and EASY, you
can change your HTF in a tuxedo or wedding
OptiSource Dry UV Packets provide an alter- dress.
native to the premixed bottles that may take 99-HTF
up your precious shelf space. Each EASY-to- Contact OptiSource for current pricing.
use, self-dissolving packet, contains enough
Heat Transfer Fluid
powdered formula to produce a full quart of
OptiSource
UV solution. Let OptiSource reduce your shipping charges by 1/3. Simply drop this Dry UV
Packet in warm water, heat to 200° Fahrenheit,
96° Centigrade, and start UV treating lenses.
These revolutionary Dry UV Packets weigh
less than 1 oz., are 3 x 3” in size and can
EASILY be shipped in mailing envelopes for
convenience. Just try OptiSource Dry UV
Packets today.
Dry UV Packet
OptiSource
Clean and Clear is the cleanest UV with a nonclumping and crystallizing guarantee. This UV
solution eliminates popping and spattering for
a safer work area. Clean and Clear UV rinses
With AR coatings becoming more popular, it’s clean to produce incredibly clear lenses.
important that all opticians are equipped with Makes 1 quart.
AR Remover, to remove these coatings from 99-CCUV
time-to-time. Thanks to the Research and Contact OptiSource for current pricing.
Development team at OptiSource, now there’s
Clear Eclipse UV
a convenient 10-second to 3-minute in-house
OptiSource
removal process. So SAVE time, improve your
service, and never send your valuable cus99-DUV
tomers away without their glasses again!. No
SPECIAL machinery, tools or training required.
HD UV Shield
99-AR
OptiSource
AR Remover Kit
OptiSource
OptiSource’s Heat Transfer Fluid (HTF) is a
unique blend that provides the benefit of corrosion resistance, high temperature operation
and dye neutralizing for when dye accidentally spills down into the HTF. It is the slowest
evaporating chemical known to man. Heat
Transfer Fluid is completely odorless and
biodegradable, making it safe for the user and
the environment. Use OptiSource’s OAA
award-winning HTF to protect and prolong the
life of your expensive tint unit today. It’s the
perfect preventive maintenance solution for
any machine and every operation. *Change
HTF every 6 months for optimal performance.
*Ask about our FREE $30 Syphon Pump that
makes change-outs so clean and EASY, you
can change your HTF in a tuxedo or wedding
dress.
Clear Eclipse UV, OptiSource’s BEST-selling
UV, is the most advanced all-around UV formula available today. Clear Eclipse UV is
powderless, non-clumping and a FAST-acting
solution, that is compatible with today’s hightech coatings. Make Clear Eclipse your favor- For over 30 years, this HD UV Shield has had
ite UV too. Order today! Makes 1 Quart.
a PROVEN track record of safety and success.
99-CEUV
If you have chemical or allergy sensitivity, this
is the solution for you. HD UV Shield is odorless and also available in a UV-Scratch Coat
CR-39 Nu-Tralizer
combination. This UV shield is safe on all 99-HTFQ
OptiSource
lenses and coatings and has a protection up Contact OptiSource for current pricing.
to 400 nm. Makes 1 quart. *Previously recogMilky Way UV
nized as Hunter Delatour UV Shield.
With AR coatings becoming more popular, it’s
important that all opticians are equipped to
remove these coatings from time to time.
Thanks to the Research and Development
99-HDUV
team at OptiSource, now there’s a convenient
10 second to 3 minute in-house removal proHD UV Shield w/Scratch Coat
cess…AR Remover Kit! Never send your valuOptiSource
able customers away without their lenses.
The AR Remover Kit includes all you need to
remove AR coatings in your o office or lab: AR
Remover Chemical, Chemical-Resistant
Gloves, basin with resealable lid and a plastic
lens holder. Recommended for CR-39 lenses Introducing the FASTEST neutralizer in the
only. 8 oz. chemical refill also available. No industry…CR-39 Nu-Tralizer. Specifically forSPECIAL machinery, tools or training required. mulated for CR-39 and High Index Lenses,
you can RAPIDLY remove tint. Stubborn or old
99-ARK
lenses are no problem. OptiSource’s CR-39
Nu-Tralizer will get the color out where others
For over 30 years, this HD UV Shield has had
Clean & Clear Ultra Kote UV w/
will not.
a PROVEN track record of safety and success.
99-CRQ
Scratch Coat
If you have chemical or allergy sensitivity, this
is the solution for you. HD UV Shield is odorOptiSource
CR-39 Nu-Tralizer
less and also available in a UV-only formula.
This UV shield is safe on all lenses and coatOptiSource
ings and has a protection up to 400 nm.
Makes 1 quart. *Previously recognized as
Hunter Dilator UV Shield.
99-HDUVS
OptiSource
The answer is Milky Way, the world’s only
white UV solution - now available to all
OPTICAL professionals. This SPECIAL white
formula is 100% clearer than any other UV.
Milky Way is guaranteed to be the clearest UV
you’ve ever used or your money back. Makes
1 quart.
99-MWUV
No Yellow Ultra Kote UV w/Scratch
Coat
OptiSource
Heat Transfer Fluid
OptiSource
The Clean and Clear Ultra Kote is the cleanest
UV, totally crystal-free formula. A non-clumping UV bath helps the UV to last longer and
run cleaner in the pan and clearer on the lens.
Clean and Clear Ultra Kote UV makes cleanup EASY and the SPECIAL Scratch Coat formula provides EXCELLENT scratch protection. Makes 1 quart.
99-CCUKUV
Introducing the FASTEST neutralizer in the
industry…CR-39 Nu-Tralizer. Specifically formulated for CR-39 and High Index Lenses,
you can RAPIDLY remove tint. Stubborn or old
lenses are no problem. OptiSource’s CR-39
Nu-Tralizer will get the color out where others
OptiSource’s Heat Transfer Fluid (HTF) is a
will not.
unique blend that provides the benefit of cor99-CR
rosion resistance, high temperature operation
No Yellow Ultra Kote UV guarantees to provide virtually no yellowing while providing
100% UV protection up to 400 nm. No Yellow
Ultra Kote UV will never ruin a lens. Makes 1
quart.
99-UKUVNY
10/12/11 11:09 AM
78
LENS COATING
Award of Excellence Winner.
Coating Supplies
Ultra Kote UV w/ Scratch Coat
Deionizer Cartridge
OptiSource
PSI
99-NUT
No Yellow UV
Nu-Tralizer
OptiSource
OptiSource
If you are looking to combine UV and Scratch Mixed Bed Deionizer Cartridge. Equivalent to
Coat protection in a SIMPLE 2-minute step, Gerber Coburn’s part #83432-00 for the
No Yellow UV guarantees to provide virtually
no yellowing while providing 100% UV protec- OptiSource’s recent technological advances
tion up to 400 nm. Makes 1 quart. No Yellow
have produced Nu-Tralizer…an odorless neuUltra Kote UV will never ruin a lens. Makes 1
tralizing compound that reduces and removes
quart.
99-CEUVNY
tint color from CR-39, High-Index
and
Nu-Kote Scratch Coat
OptiSource
Polycarbonate Lens materials without compromising any lens coating. Performs in 30
look no further than OptiSource’s PREMIUM
Ultra Kote UV solution. There’s no baking or
Lenscoater.
1179 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $55.68
curing required. Simply pour this solution into
Gloves
your tint pan, add water, heat to 200 degrees
PSI
F° / 96 degrees C° and dip your CR-39 lenses
for only 2 minutes. It’s that EASY! Try Ultra
seconds to 10 minutes, depending on color Kote UV today, you’ve got nothing to lose, and
density. Nu-Tralizer was a OAA’s Environmental it’s guaranteed! Makes 1 quart.
Award of Excellence Winner.
99-UKUV
99-NQ
Water Based Nu-Tralizer
Substitone
OptiSource
OptiSource
Nitrile Blue Gloves are highly elastic offering a
secure fit. Their superior strength extends
their wear. They are ergonomically designed
Nu-Kote Scratch Coat is a revolutionary,
SIMPLE dip and rinse, hot-dip scratch coating, which is applied the same way your tints
are applied. Simply dip the plastic lenses in
the Nu-Kote solution at 200° F for 3-5 minutes
and then rinse with water. Nu-Kote bonds
within the pores of the lens matrix and makes
the uncoated lenses over 2 times harder and
more difficult to scratch.
99-SK
Nu-Kote Scratch Coat Quart
OptiSource
to provide the fit, comfort and durability of
natural latex without the protein allergens.
Textured for better gripping. Powder-free to
eliminate contamination. 6mil. small, medium,
large & x-large. 100/box, 10 boxes/case.
Available by the box or case. Latex gloves
OptiSource’s Water Based Nu-Tralizer is our also available.
OptiSource, two-time winners of the OAA safest solution for tint removal. EASILY mixed Contact PSI for current pricing.
Environmental Award of Excellence, has con- with water, feel confident using this neutralizer
Ultraviolet Lamps
tinued to be sought after for HIGH-QUALITY
environmentally safe products. Substitone is
safer than acetone and eliminates irritating
chemicals and fumes. Recent requests have
on all lenses and coatings. The neutralizer is
PSI
drain-safe and biodegradable.
99-NUTH2O
included an EFFECTIVE yet safe alternative to
Acetone. OptiSource has heard your requests
UV-ULT Replacement Lamp
and has responded with Substitone...the
OWC
world’s FASTEST and strongest Acetone
Substitute. Get your supply today!
PSI offers high quality, long-life ultraviolet
99-SUB
replacement lamps to be installed by the pur-
Nu-Kote Scratch Coat is a revolutionary, Contact OptiSource for current pricing.
SIMPLE dip and rinse, hot-dip scratch coatSubstitone
ing, which is applied the same way your tints
are applied. Simply dip the plastic lenses in
OptiSource
the Nu-Kote solution at 200° F for 3-5 minutes
and then rinse with water. Nu-Kote bonds
within the pores of the lens matrix and makes
the uncoated lenses over 2 times harder and
more difficult to scratch.
99-SKQ
chaser. An alternative to high priced manufacturer’s replacement parts.
Replacement Parts:
DLA-UV-LC3 UV lamp for Lenscoater . . . . . . . $278.00
DLA-UV-LTI UV lamp for LTI 1000 Coater . . . . $265.00
DLA-UV-ULT UV lamp for Ultra Optics Coater. $336.00
Replacement lamps for the UV lamp assemblies on the Ultra Optics coaters.
Nu-Tralizer
100% Cotton Inspection Gloves
Sentilles
OptiSource
Carbon Core Pre-Filter
PSI
OptiSource, two-time winners of the OAA
Environmental Award of Excellence, has continued to be sought after for HIGH-QUALITY
environmentally safe products. Substitone is
safer than acetone and eliminates irritating
OptiSource’s recent technological advances
have produced Nu-Tralizer…an odorless neutralizing compound that reduces and removes
tint color from CR-39, High-Index
and
Polycarbonate Lens materials without compromising any lens coating. Performs in 30
seconds to 10 minutes, depending on color
density. Nu-Tralizer was a OAA’s Environmental
chemicals and fumes. Recent requests have
Eliminate acidic finger prints while handling
included an EFFECTIVE yet safe alternative to
delicate lenses, replacing sensitive reflectors
Acetone. OptiSource has heard your requests
and UV bulbs, or working on delicate instru-
and has responded with Substitone...the
ments. Don’t let acidic prints etch the surface
world’s FASTEST and strongest Acetone 10” 5 micron carbon core pre-filter. Equivalent of your bulbs or reflectors. Large only, 20
to Gerber Coburn’s part #833431-00 for the gloves per bag.
Substitute. Get your supply today!
Lenscoater.
99-SUBQ
1-1219
#1180 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.25
10/12/11 11:09 AM
LENS COATING
79
ARC 805 Tintable Coating
Coating Filter for LC3 IQ Lenscoater
Gloves - Powder Free Latex
Sentilles
Sentilles
Disposable
Coating Supplies
Sentilles
All Lens™ 4500 Tintable Hardcoat
Ultra Mini II NV & MR3
Sentilles
Replacement coating filter for LC3 IQ
Lenscoater. Coating flow problems may indicate a clogged filter and need for replaceNatural, rubber latex gloves are powder free
achieves 100% of the four major coating charment.
and recommended for use with food, coating
acteristics: smooth, even spread; total adheAbrasion-resistant coating for polycarbonate
38-1236800
ALL LENS™ 4500 is a 100% polymer NONVOLITALE UV cure tintable backside coating
for use in the ULTRA OPTICS MINI II-NV OR
MR3. Provides improved abrasion resistance
and sunglass tintability with full adhesion for
polycarbonate, high-index and hard resin
lenses. 6 ounce bottle will coat approximately
3700 lenses for the same price as Ultra Optic’s
4 ounce bottle, you get 2 ounces free.
sion to lens; tint ability from fashion tint to #3 Contact Sentilles for current pricing.
shade at variable cure times; excellent abra-
and clean room environments. Stronger and
sion resistance.
wrist cuff for easy on/off. Glove fits either
Economy Wipers Lint Free
Sentilles
01-4805-16 Pint
less irritating than regular latex gloves. Roll
hand. 100 per box, 10 boxes to the case.
1-1223 Small gloves
Coating ACU(2)-1500
1-1225 Medium gloves
1-1227 Large gloves
Sentilles
1-1228 Extra Large gloves
Part# 1-4500-06 (6 oz bottle)
Gloves - Powder Free Nitrile
All Lens™ 650 Tintable UV Cure
Disposable
Coating - Ultra Mini II
Sentilles
ACU2-1500 is a 100% polymer nonvolatile UV
curable tintable backside coating for the
ACU2 Automated Coating Unit. Provides
improved abrasion resistance and sunglass
Sentilles
100% polyester nonwoven fabric is very
absorbant. Designed for cleaning delicate
optical products, such as lenses and mirrors.
Extremely soft and clean, nonabrasive cleaning yet strong and durable. Compatible with
many solvents.
tintability with full adhesion for polycarbonate, Part# 1-17530 Economy Wipers Lint Free 4” x 4”, (600/
high-index and hard resin lenses. Each 120ml pack)
tube coats approximately 2400 lenses.
Ethyl Alcohol
1-1500-120
Abrasion resistant UV curable backside coat- Contact Sentilles for current pricing.
ing for all lenses. Provides improved abrasion Coating ARC 750 Abrasion Resistant
resistance and sunglass tintability with full
Universal Backside Coating
adhesion.
Part #1-4650-032 (32 oz. bottle)
Sentilles
Blue NITRILE gloves, ambidextrous, are much
stronger and more chemical resistant than
latex. Powder free to reduce contamination in
Sentilles
lens coating areas. Nitrile enables longer wear
time and more comfort than latex. Non-
AR Stripper - Coating Remover
medical grad gloves. 100 gloves per box, 10
Sentilles
boxes per case.
1-1243 Small gloves
tintable. 16oz. bottle.
Ethyl Alcohol denatured reagent grade solvent 1-1247 Large gloves
exceeds specifications for laboratory and AR 1-1248 Extra Large gloves
coating processes. Also exceeds specifica- Contact Sentilles for current pricing.
tions established by the American Chemical
Gloves - Powder Free Vinyl
Society (ACS) in the seventh addition of
Disposable
“Reagent Chemicals.” Can be used anywhere
in your lab procedures where you are curSentilles
rently using a lower quality, more expensive
ethyl alcohol. Available in gallons.
1-4750-016
1-2053-128
Abrasion resistant universal UV curable backside coating for polycarbonate, high index
Removes AR coating allowing lenses to be
re-coated, dyed, or UV treated. Just dip lens
in solution, rinse, and wipe dry for a perfectly
clear lenses with no residue.
1-2010-016 Pint
1-2010-032 Quart
1-2010-128 Gallon
ARC 160 Hi-Index Hardcoat Coating
Sentilles
and hard resin lenses. Provides improved
abrasion resistance and full adhesion. Non-
Coating ARC 835 Dip Applied UV
Foam Surewipe Lint Free Class 100
Curable
Sentilles
Sentilles
VINYL - For those allergic to latex gloves.
These vinyl gloves are clear, soft, ambidextrous, disposable and powder free. They allow
greater finger dexterity and will not cause
hand fatigue. Snug, rolled cuff for greater
Highly porous lint free foam removes submicron particles from lens surface. Use with AR
Abrasion-resistant coating. Smooth, even UV-curable dip coating for high production.
and UV coating systems to clean lens prior to
spread; total adhesion to lens; supreme abra- Custom proprietary formulas developed for
coating. Packaged in Class 100 clean room
sion resistance. This is a non-tintable hardspecific applications. Call for consultation and for ultimate cleanliness.
coat.
scheduling.
Part # 1-17529 Foam Surewipe 1/8 x 4 x 4, (100bag)
01-4160-16 Pint
protection. Keeps hands cool and comfortable.
1-1233 Small gloves
1-1237 Large gloves
1-1238 Extra Large gloves
10/12/11 11:09 AM
80
LENS COATING
Lens Cleaner
Lint-Free Towels & Tissues
PM Cleaning Solvent
Sentilles
Sentilles
Sentilles
Formulated for cleaning all lens surfaces. Can
be used at de-block wash-up and throughout
surfacing and finishing for cleaning lenses.
Lenses rinse sparkling clean, leaving no residual contaminants to interfere with dyeing,
coating, or other down-line processes. Pump
dispenser available for easy dispensing.
Available in 8oz., quart and gallon.
Lenses require speck-free preparation prior to
Coating Supplies
Gloves (100% Cotton)
Sentilles
100% cotton gloves (one size) should be used
to eliminate acidic finger prints when handling
or replacing such delicate items as reflectors,
UV bulbs and a variety of instrument bulbs.
Acidic prints will etch the surface of bulbs and
reflectors. We also sell latex gloves–look for 1-4091-008 8oz.
our ad.
1-4091-032 quart
1-1121 Bag of 20 gloves
Gloves Latex
Sentilles
1-4091-128 gallon
857957 pump dispenser
Lens Dry Additive
Sentilles
coating. Absorbent tissues and towels are
Use this cleaning solvent in the C‘N’C with the
ideal for cleaning lens surfaces, even coated 450 and 550 coatings to clean out build-up
polycarbonate. Excellent for any lab use. Lint- and decontaminated coating lines and other
free tissues:
UV curable backside coating systems. 4 gal-
1-17524 300/box
lons/case.
1-17524-60 300/box-60 boxes/case
1-4001-128
1-17526 90/box
1-17526-15 90/box-15 boxes/case
Quartz Lens for Lenscoater 3/EX
1-17542-20 300/box-20 boxes/case
Sentilles
NV HARDCOAT ALL LENS ™ 2500
Sentilles
Replace dirty quartz and improve curing effiNatural latex, surgical-type, ambidextrous
disposable gloves. Allow for greater finger
dexterity and do not cause hand fatigue. Snug
rolled cuff for greater protection, keep hands
cool and comfortable. Available in small/
medium fits sizes 5 to 7, medium/large fits
sizes 7-1/2 to 9. 100 gloves per box.
1-1111 Small/Medium, 100 per box
1-1112 Medium/Large, 100 per box
ciency. Gasket sold separately. Size #38-
Lens dry additive for the Gerber Coburn
Lenscoater. Lens dry additive is added every
time you refill de-ionized water container. 1
pint/16oz.
1-83427
1274800 Lens Quartz Lenscoater 3 / EXII.
Tissue Dispenser Stand
Sentilles
NV HARDCOAT ALL LENS ™ 2500 - ULTRA
Lens Holder Adaptors For LC3/EX
MINI II-NV & MR3 ALL LENS ™ 2500 is a
Sentilles
100% polymer NV UV Cure HARDCOAT
Backside coating for use in the ULTRA
Isopropyl Alcohol 0.2 Micron Filtered
OPTICS MINI II-NV or MR3.
Provides
improved abrasion resistance when tint ability
Sentilles
is not an issue. Our 6 oz gives you 2 ounces
more than the competitors’ 4 ounce bottle, 1/3
more coating.
1-2500-004 (4 oz bottle) (Case =4) 4 ozs
1-2500-006 (6 oz bottle) (Case =4) 6 ozs
Lens holder adapter provides secure grip of Contact Sentilles for current pricing.
suction cup and lens. Special grooves reduce
OPTICSOLV AR™ Acetone
dismount in LC3 coater and increases yield.
Sentilles
Suction cups, magnets, mounting screws and
Isopropyl alcohol filtered through 0.2 micron spacers are also available for CNC, QC III and
Finally a new alternative Acetone for AR
absolute filters for highest levels of purity QC I.
demanded in today’s coating field. Exceeds 35-4036 Spacer-Large for #4041 Cup
COATING LABS
35-4037 Spacer-Medium for #4042 Cup
specifications for quality production and tech35-4038 Spacer-Small for #4043 Cup
Opticsolv AR™ Acetone is the Highest Purity
nical requirements.
44927 Gallon
Lab Tech Low Lint Texture Towels
Sentilles
35-4040 Magnet
35-4041 Suction Cup Large
35-4042 Suction Cup Medium
35-4043 Suction Cup Small
38-008 Lens Holder Adapter LC3
Lens Scrub Sponges
Sentilles
Acetone available. For use with the most
Tissue holder dispenser stand allows for easy
removal of one tissue at a time. Inverted box
helps protect lint-free tissue from airborne
contamination. Great for use throughout the
lab or at the dispensing table.
1-17525
Tissue Dispenser Wall Mount
Sentilles
demanding Anti-Reflective coating applications. Opticsolv ARtm is bottled in Amber
glass, packaged under nitrogen this process
insures absolute purity,
minimal moisture
content, lowest extractable and the least residue upon evaporation required for critical AR
coating processes.
Meets and exceeds specifications for Zeiss
AR applications, and all other AR processes.
Tissue holder dispenser wall mount allows for
Save time, money and shipping expenses by
easy removal of one tissue at a time and frees
combining all your solvent orders on one
These 12 x 13 towels are low lint and will
replace the low lint K-dry towel . They are
packed 50 per bag. Great for use around
dying area.
Part # 1-17522 Lab Tech Texture Towel 12x13 (50Bag)
up valuable counter space. Inverted box helps
Unique surface provides better residue monthly shipment.
protect lint-free tissues from airborne conremoval before coating application. Designed
for use with Pre-coating Lens Cleaner but Compare to Fisher’s Product A929-A
tamination. Great for use throughout the lab,
works very well with other cleaners too. Each
Call for current pricing. Bulk pricing based on machine mounted or at the dispensing table.
sponge is 2-1/2” x 4”.
75-7004
monthly usage / monthly purchase orders.
1-4090 package of 12
10/12/11 11:09 AM
SPEX UPC by
Effective inventory management improves your bottom line.
DOES YOUR PRACTICE DISPENSE FRAMES?
If you are using practice management software, SPEX UPC can help
you manage your frame inventory more effectively.
• Eliminate time consuming data entry of frame information
• Update your frame information automatically
(including wholesale price updates!)
• Spend more time helping your patients, and less time working
on your inventory
To order SPEX UPC call (800) 739-7555 today!
To use SPEX UPC at multiple locations, please call (800) 821-6069 Ext. 2
www.framesdata.com
Intelligent information to help grow your business.
CXH1
82
LENS COATING
Coating Supplies
Ultra Alcohol 99%
Sentilles
VC-106
39-006 Vacuum Cup for UO Coater Small Lens
Adaptor VC-36
75-7019 Vacuum Cup for SOS ACU Automated
Coating Unit
AR Stripper
Vigor Optical
Vinyl Exam Glove Powder Free
Sentilles
Full strength solution for stripping AR from
lenses. No heating necessary. Submerge lenses for 15 to 20 minutes, rinse with water. 16 fl.
oz.
847012 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $55.00
Filtered isopropyl alcohol 99% reagent grade
provides highest quality and purity. Can be
used anywhere in the lab where you currently
use a lower quality, more expensive isopropyl
alcohol. Exceeds specifications for quality
production and technical requirements as well
as the specifications established by the
American Chemical Society (ACS) in the seventh addition of “Reagent Chemicals”. 4 gallons/case.
1-2073-128
Ultra Optics Filter For Coating Or
Water
Sentilles
This vinyl glove is of medical grade and
exceeds all FDA requirements. Powder free
and hypo-allergenic with a smooth non-slip
surface. 100 gloves/box. 10 boxes/case.
1-1233 Gloves Vinyl, Small
1-1235 Gloves Vinyl, Medium
1-1237 Gloves Vinyl, Large
1-1238 Gloves Vinyl, Extra Large
Wash Bottle
Sentilles
Replacement Filter for Ultra Optics Mini II & For use throughout the lab with SOS Isopropyl
NV Coater
Alcohol, Acetone, or PM. Holds 500 ml of
Part # 39-1404 Filter Coating or Water Ultra Optics
cleaning solvent. Dispenser tip included. Part
Coater
# 1-4501.
UV CURE COATING 455 TINTABLE
Sentilles
Water Filter Lenscoater 3/EX
Sentilles
455 TINTABLE UV CURE COATING (replaces
HT-450 coating). Replace HT-450 with our 455 Pre-flushed high purity De-ionized water filter
Abrasion Resistant UV Curable Backside
for Coburn Lenscoater 3/EX. Direct replaceCoating.
ment for Coburns part #1739201 Sentilles
Provides excellent abrasion resistance and Optical Part #38-1739201.
sunglass tintability with 100% adhesion.
1-4455-016 16 OZ BOTTLE
Vacuum Cups For Ultra Coaters &
Cure Units
Wipers-Lint Free
Sentilles
Sentilles
Lint-free wipers measure 9” x 9” and are laundered and packaged in a Class 10 Cleanroom.
Use for backside coating applications, LC3
High quality vacuum cups for coating and
coating systems, AR coating applications and
cure units.
cleaning AR coated lenses. Excellent for final
39-001 Vacuum Cup for UO Coater 1/4 Fitting x 2”
VC-86
Rx cleaning before shipping. Also available in
39-002 Vacuum Cup for UO Coater 1/8 Fitting x 2”
12” x 12”. Lint-freewiper 9” x 9” packaged 75/
VC-86
Bag.
39-004 Vacuum Cup for UO Coater 1/8 Fitting x 2.5”
VC-106
39-005 Vacuum Cup for UO Coater 1/4 Fitting x 2.5”
1-17528
10/12/11 11:09 AM
LENS DYEING
BPI Turbo Tinter 2™
Color Testers & Samples
Dyeing Equipment
BPI® Lens Displays
Adapter Plates
BPI
BPI
# 13900 Designer pallet 8
Color Analyzer/Comparators
BPI
Older systems require Adapter plates to resize
spaces and accommodate pint-sized MiniTanks.
52201 For Super Color 9 and II
52301 For Mini Tank 8. Solar Color 4L
52400 For Super Color 6
52600 For Super Color I
Advanced Computer Gradient III
BPI
Two models for maintaining color standards
and matching lenses, depending on your work
load. The polychromatic filter provides for
perfect daylight color matching. Standard
Model. 4-3/4”h x 18-1/2”w x 6-1/2”l. 7lb
(3.2kg).
10700 115V
14600 Production Analyzer/Comparator: 7-3/4”h x
25-1/2”w x 16-1/2”d
210700 220V
Color Matching Unit, Opti-Safe®
Phantom
BPI
Automatic 4-Stroke Gradient III
BPI® Advanced Computer Gradient
IV™
BPI
The ultimate instrument for lens tinting. It
features microprocessor temperature monitoring and automatic solution mixing. The
method of heating the twin beakers also prevents dye crystallization. The BPI Turbo Tinter
2™ tints high index or hard coated lenses better than conventional systems. The lenses are
heated by IR light from the ceramic heating
chambers. This method of heating causes the
surface of the lenses to be heated higher than
212° F (100° C) allowing better and more even
tint penetration. The temperature of the tint
solution can be accurately maintained by the
computer at any temperature below boiling
point. 205° to 208° F is optimal (96° to 98° C).
The tint solution is kept in constant motion by
the stirring mechanism. This constant motion
stops the tint solution from boiling over. The
system eliminates the need for heat transfer
fluid. It is made of 100% stainless steel and is
constructed from UL listed components (USA
Underwriter’s Laboratory) and meets or
exceeds the European CE standards. It holds
two 1.5 quart beakers and has a 5-year limited
warranty. 12”h x 15-1/4”w x 13-1/2”d.
Perfect gradients time after time, computer
control and continuous motion for the
smoothest gradient effects. 6 programs easily
enable you to control the type of gradient
needed.
BPI Turbo Tinter 4™
BPI® Solar Color 4L Digital 5 stroke
Gradient Lensor
Features solid-state control center, separate
from the gradient head. The programs enable
you to easily control precision coloring of
gradients, solid colors and special effects of
your own creation. Some of the programs
have a rapid dip into dye bath to give
improved smoothness to the tint. Time
remaining in cycle is displayed and program 9805 115V
may be interrupted during operation. Contact BPI for current pricing.
Consistently produces superior results.
83
BPI
BPI
# 12611 110v
# 213404 220v
BPI® Digital Mini Tank 4
BPI
Features digital temperature thermostat. The
BPI® Digital Mini Tank 4™ System (BPI#9810)
is a compact arrangement of 4 pint sized mini
tanks. The chassis and liner pan are all stainless steel. Like most BPI® tinting units it has
provisions for mounting a single optional
Gradient Lensor. The system requires 120 volt,
50/60 Hz (220v, #209811) and is circuit breaker
protected at 20 amps. Components are UL
and CSA recognized.
# 209811 220v
# 9810 110v
BPI
Illuminated color matching unit simulates daylight conditions to help you consistently
match tinted lenses. This unit ensures that
each lens you tint is exactly the desired color
you are looking for. 4.2”h x 18.3”w x 5.9”d.
Tinted Lens Display, Opti-Safe®
Phantom
Tinted lens display tray. 15 lens slots, clear
durable acrylic. 1-1/2”h x 12”w x 6-1/2”d. 1lb.
5oz shipping weight.
The built-in timer automatically turns off and The ultimate instrument for lens tinting. It
removes the lenses from the dye when the features microprocessor temperature monicycle is complete.
toring and automatic solution mixing. The
This allows hands-free operation, giving the method of heating the twin beakers also pretechnician time for other tasks. Produces
vents dye crystallization. The BPI Turbo Tinter
gradient lenses only. 6” x 6” x 7”, installed
4™ tints high index or hard coated lenses bet18”h. 8lb (3.6 kg).
ter than conventional systems. The lenses are
Wind up timer still available
heated by IR light from the ceramic heating
12504 115V
212504 220V
chambers. This method of heating causes the
surface of the lenses to be heated higher than
Automatic 5-Stroke Gradient III
212° F (100° C) allowing better and more even
BPI
tint penetration. The temperature of the tint
solution can be accurately maintained by the
computer at any temperature below boiling
point. 205° to 208° F is optimal (96° to 98° C).
The tint solution is kept in constant motion by
the stirring mechanism. This constant motion
stops the tint solution from boiling over. The
system eliminates the need for heat transfer
fluid. It is made of 100% stainless steel and is
constructed from UL listed components (USA
Has all the features of the 4-Stroke Gradient.
Underwriter’s Laboratory) and meets or
In addition, solid tints under timer control are
as easy as a flip of a switch. 6” x 6” x 7”, exceeds the European CE standards. It holds
installed 18”h. 8lb (3.6kg). Stainless steel. four 1.5 quart beakers and has a 5-year limitWind up timer still available
ed warranty. 12”h x 15-1/4”w x 13-1/2”d.
12404 115V
209806 220V.
212404 220V
13.384. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $40.00
Featuring a two-volume (18 lenses per volume) tinted lens display which aesthetically
exhibits our most popular Opti-Safe® dye
colors, including both solid and gradient tints.
This tinted lens display can be used as a color
reference guide or as an attractive display in
any office, lab, or dispensing area. 11” x 12” x
1.5”, each volume. 4lb.
Tint Display Tray
Vigor Optical
083-100_SF1110_LensDyeing.indd 83
Custom designed to fit the Solar Color 4L dye
system. Features four independently timed
5-stroke gradients for tinting both solids and
gradients automatically. Ideal for small labs
and the high-production profes-sional office.
Includes four Lens Holder IIs. Dye unit sold
separately. 22”h x 21-3/4”w. 37lb (17kg).
# 14804 115V
# 214805 220V
BPI® Super Color I Digital 5-Stroke
Gradient EGL Lensor
BPI
Features digital timers. The Super Color I
EGL™ Gradient System combines 6 independently controlled 5-Stroke Gradients into one
unit which is easily positioned behind the
Super Color I dye unit. The main ON/OFF
switch controls power to all 6 gradients.
# 15810 (115v)
# 215801 (220v)
Dye unit sold separately
10/12/11 11:11 AM
84
LENS DYEING
Mini Tank Storage Rack
Mini-Tank 8
BPI
BPI
Dyeing Equipment
Color Lab 5-Stroke Automatic
Gradient Lensor
tanks 7-3/4”h x 9-3/4”w x 14”l. 20lb (9.1 kg).
209804 220V
9794 115V
Solar Color 4
BPI
BPI
Contains eight stainless steel pintsize tanks
Mini Rack holds up to four tanks; includes drip and occupies very little of your work area. Can
be used with optional 5-Stroke Gradient
guard. 6”h x 5”w x 15”l.
Lensor. 7”h x 21”w x 10-1/2”l, 33lb (15kg).
63400
Complements the Color Lab I Dye System. It 63500 Quart Tank Rack (not shown)
has six independently timed 5-Stroke gradient Contact BPI for current pricing.
lensors.
209903 220V
9902 115V
Mini-Tanks
Mini-Gradient
Facilitates multi-color dyeing of fashion gradients and solids. Includes 6 Lens Holder IIs.
Dye unit sold separately. 22”h x 46-1/2”l. 49lb
(22.5kg). Stainless steel.
BPI
BPI
A versatile and compact two-by-two unit
designed for use in limited work areas.
6-1/4”h x 17-3/4”w x 12”d. 25lb (11.3kg).
10401 115V
210402 220V
Solar Color 4L
12902 115V
215813 220V
BPI
Color Lab I
BPI
Double the capacity of your dye system. Two
mini-tanks replace one quart-size tank. Made
of heavy-gauge stainless steel offering longa timer. It will continue the cycle until it is term durability.
Has six half-gallon stainless steel tanks in linturned off. 4-3/4” x 4-1/2” x 5”. Height 21” 63100 Mini-Tank and Lid
ear design. It easily handles volume tinting for
63200 Tank only
63300 Thermal Lid only
the laboratory with smaller multi-color when mounted. 6lb (3kg). Stainless steel.
demands. Each tank accommodates multiple 12303 115V
lens holders. Complete the system with BPI’s 212303 220V
Production Master System
optional Color Lab I Automatic 5-Stroke Contact BPI for current pricing.
BPI
Gradient Lensor unit. Includes Lens Holder II.
Mini-Tank 4
9-1/2”h x 9”w x 45-1/2”l. 66lb (30kg). 220V.
Offers a continuous 4-stroke process without
212801
Its linear design accommodates four quartsize tanks. Can be utilized with an optional
single gradient or the Mini Color 4L Automatic
Gradient Lensor (a multi-gradient). 7”h x
10-1/2”d x 21-1/2”l. 33lb (15kg).
13204 115V
213202 220V
BPI
Dye Guards
Solar Color 6
BPI
BPI
A two-tank dye system geared for high volume. The system can be used for UV treating
or color tinting. Features a 5-gallon tank and a
1.5-quart tank. Holds optional 42 pr or 16 pr.
7301
Designed for very limited color needs, this Contact BPI for current pricing.
compact system features four stainless steel
Quart Tanks
Help prevent contamination and minimize
evaporation of dyes and chemicals. Useful for
protecting Ultraviolet Diamond Dye™ or
UV-ONLY™ chemicals from contamination.
Easily slide over tinting tanks and act as dividers between the tanks in lens coloring systems.
pint-size tanks.
68200 Quart Tank Dye Guard™ Adapter
68201 Mini-Tank Dye Guard™ Adapter, pint size
9806 115V
BPI
Perfect for the small lab. Features six stainless steel quart tanks (up to 12 mini tanks)
providing for a varietyof production capabilities. 37lb (16.8kg).
Easily accommodates optional single gradient.
7-3/4”h x 9-3/4”w x 14”l, 20lb (9.1kg).
209807 220V
10306 115V
210303 220V
Master Color System
Mini-Tank 6
BPI
BPI
Super Color 9
BPI
Stainless steel.
61200 Tank with lid
61300 Tank only
62700 Thermal lid only
Solar Color 2
BPI
For engineering and temperature stability.
Designed for laboratories with large volume
tinting needs. Includes 10 stainless steel halfgallon tanks. The built-in analyzer/comparator
provides for convenient color matching.
8-1/2”h x 17”w x 42-1/2”l. 84lb (38kg.) 211101
220V.
211100
A compact, stainless steel, six pintsize system, easily accommodates an optional single
gradient lensor for more versatility. 9-3/4” x
18” x 7”. 34lb (15.4kg).
10002 115V
210002 220V
Nine stainless steel quart-size tanks.
Designed for labs offering a wider color selection. Has a built-in receptacle for an optional
single gradient. 7-3/4”h x 16-1/2”w x 25-1/2”l.
46lb (20.9kg).
17806 115V
Features two stainless steel quart-size tanks. 217806 220V
Can easily be converted into 4 pint-size mini- Contact BPI for current pricing.
10/12/11 11:11 AM
86
LENS DYEING
Turbo 6
Dyeing Equipment
BPI
BPI-12401 Automatic 5-stroke
Gradient
Optical Machinery
Super Color I
BPI
that eliminate lines. Telescoping arm allows
the mechanical gradient to be used with any
tint system. Table or machine mountable.
99-GRADIENT
Automatic Lens Tinting Machine
Phantom
6 liter tanks with automatic stirring for fast
Offers 5 strokes at varying depths for smooth
tinting of today’s lenses. Recommended for transition from dark to light areas of lenses;
polycarbonate and high index lenses.
set timer short for cosmetic or fashion tints
For the professional office or laboratory.
209808 220V
OR set it long for dark sun-type tints; made of
Designed to accommodate seven quart-size
stainless steel; height when mounted is 21
9807 115 V
tanks or 14 minitanks.
State-of-the-art patented microcomputerinches.
BPI 12401 BPI Automatic 5-Stroke Gradient Unit
controlled automatic lens tinting machine for
Can utilize an Economy Gradient Lensor (a
Contact
Optical
Machinery
for
current
pricing.
Twin 12
both solid and gradient tinting with absolutely
multi-gradient). 7-1/2”h x 34-1/2”w x 10- 1/2”l.
BPI-9801 Mini Color Tint Unit
no line. Fast set-up. Features a versatile arm
46 lb
BPI
that can accommodate up to four pairs of
Optical Machinery
(20.9 kg).
lenses at a time. Comes with one lens holder,
10503 115V
Model V1-RS and a UL listed power adapter.
210503 220V
10lb (shipping weight). U.S. Patent Number
4915986.
Super Color I Economy Gradient
Lensor
Mini (Pint) Size Tanks and Lids
BPI
Phantom
Versatile volume tinting system. Two separately heated compartments, each with six
stainless steel quart-sized tanks, give instant
multi-color availability.
Unit designed for very limited color needs;
compact unit can be set-up with either 2 quart
tanks or 4 1-pint size tanks; stainless construction; accommodates optional single gradient. 110 volt.
Includes two 5-Stroke Gradients for automatic BPI-9801 BPI Mini Color 2/4 Tint Unit
coloring of both solid and gradient lenses.
9-Pan Tint System
Designed to fit the Super Color I dye system. 7-1/2”h x 19”w x 22-1/2”l. 80lb (27kg).
OptiSource
Gradient dyes up to seven different colors by 15702 115V
having seven independently operated Mini- Contact BPI for current pricing.
Gradient Lensors. Includes seven Lens Holder
Twin 8
IIs. Dye unit sold separately. 22”h x 9-1/2”d x
34-1/2”l.
BPI
15803 115V
215803 220V
Stainless steel mini (pint) size tanks and lids.
Two mini tanks take the place of one quartsize tank in your dye heating system. Great for
increasing dye color range within your existing dye heating system. Adapter bars available.
0315 Mini tank
0316 mini tank lid
Super Color II
BPI
Offers additional volume to satisfy all lens
coloring needs. Each side is independently
heated and contains four stainless steel
tanks. Has a built-in receptacle for an optional
This stainless steel, nine-quart tank system single gradient. 6-3/4”h x 19-1/2”w x 22-1/4”l.
(up to 18 mini tanks) has a built-in Analyzer/ 60lb (24.5kg).
Comparator for matching tinted lenses. 17503 115V
217501 220V
7-1/2”h x 16-1/2”w x 31-1/2”l. 54lb (24.5kg).
OptiSource’s 9-Pan Water Based Lens Tinting
Systems are a cost effective alternative to
tinting systems using Heat Transfer Fluid. Our
exclusive leak-free design will provide many
years of clean, uninterrupted service.
Temperature is maintained within 1°
Centigrade among the 9 pans of the unit. This
degree of accuracy provides optimal conditions for perfect tinting every time. Precise
control of temperature will give you darker
colors, FASTER tinting times and allow your
chemicals to perform at their BEST and last
the longest. OptiSource offers the most comprehensive, longest guarantee on Dye-Master
9-Pan Water Based Tint System and all other
related Dye-Master units, with the exclusive
OptiSource warranty on all parts and labor.
Each system includes a 10-year leak-free
guarantee as well as a FREE Chemical Starter
Pack. 110 Volts. Size: (22.75” L x 14.75” W x
10.75” H).
Opti-Safe Digital Super Tinter
Phantom
Opti-Safe Digital Super Tinter is a single quart
tank heating system combining accurate digital temperature control, variable stirring
action, split lid, and nonstick tank (Vat) for
BPI-12301 Mini Gradient Unit
heating lens tinting solutions. The detachable
Tank Removal Tool
Optical Machinery
temperature probe (Fig. 1) is immersed into
99-TINTUNIT9
BPI
the tint solution to reflect solution temperaContact OptiSource for current pricing.
ture, not the temperature of the HTF as in
Gradient System
conventional heating systems. The Unit
OptiSource
requires only 15 fl. oz. (443mL) of HTF. The
HTF is a water soluble, environmentally safe,
nonhazardous, biodegradable oil blend.
Multiple units can be aligned side by side to
create a tinting system that is perfect for your
needs.
Specifications:
300
Watts;
120VAC/60Hz, 230VAC/50Hz (Optional); All
This unit offers continuous 4-stroke process
Stainless Steel construction; Magnetic Stirrer;
Now you can safely lift both quart and mini without a timer; it will continue the cycle until
Solid state digital temperature controller; 32°
tanks out of your lens tinting instrument.
unit is turned off; stainless steel construction;
- 212°F (+/- 1.5°F); Automatic overheat protecEliminate the risk of burns and messy spillheight when mounted is 21 inches.
The Mechanical Gradient System stands up to tion; 11”l x 5.8”w x 13”h (lid down) or 15”h (lid
overs.
BPI-12301 BPI Mini-Gradient Unit
the toughtest environments. Dual-cam dip- up).
61304
ping allows for stable, non-repeating strokes Contact Phantom for current pricing.
10604 115V
210602 220V
10/12/11 11:11 AM
LENS DYEING
Dyeing Equipment
87
Quart Size Tanks/Lids
Tinting System, Model 4VS
Tinting System, Model 8MVS
Phantom
Phantom
Phantom
The heating system model 4VS is a Four quart
Dual Temperature Control Dye Heating
System. The standard unit consists of FOUR
stainless steel quart-sized tanks (vats) in
stainless steel housing for durability, minimum
heat radiation, and maximum thermal insulation. Model 4VS is designed for optimal performance in heating optical lens coloring
solutions and other similar applications, with a
temperature range from 60ºF to 250ºF (16ºC 121ºC). The standard four quart unit can hold
up to 8 mini-sized vats (optional), allowing
flexibility of constructing a heating system
that is suitable for your lab. The system incorporates two 550 Watt stainless steel heating
elements, and two separate HTF tanks with
dual temperature control thermostats. It is
designed specifically for heating OptiSafe
Heat Transfer Fluid without burning it. This is
a common problem in many heating units.
OptiSafe Heat Transfer Fluid is the recommended heating medium for this system.
19.5” x 11” x 9”. 28lbs. 120 VAC, 60 Hz (230
VAC, 50Hz optional).
The heating system model 8MVS is a Eight
mini tank Dual Temperature Control Dye
Heating System. The standard unit consists of
eight stainless steel pint-sized tanks (vats) in
heat radiation, and maximum thermal insulation. Model 8MVS is designed for optimal
performance in heating optical lens coloring
temperature range from 60ºF to 250ºF (16ºC 121ºC). The system incorporates two 550 Watt
stainless steel heating elements, and two
separate HTF tanks with dual temperature
control thermostats. It is designed specifically
for heating OptiSafe Heat Transfer Fluid without burning it. This is a common problem in
many heating units. OptiSafe Heat Transfer
Fluid is the recommended heating medium for
this system. 19.5” x 11” x 9”. 28lbs. 120 VAC,
60 Hz (230 VAC, 60 Hz optional).
OptiSafe Digital Super Tinter 6STR
Phantom
Stainless steel quart-size tanks and lids.
0204 Quart Lid . . . . . . . . . . . . . . . . . . . . . . . . . . . $13.95
0206 Quart Tank . . . . . . . . . . . . . . . . . . . . . . . . . $19.95
The first of its kind, OptiSafe Digital Tinter
6STR, provides quick heat up, fast tinting
times, and easy clean up in this revolutionary
controlled system for the production of tinted
lenses. Accurate Digital Temperature Control
- provides rapid heat-up time and the most
consistent, controlled temperature in each vat
(tank), with the temperature probe located
directly in the dye. Variable Speed Stirring - for
fast, consistent, even tinting on plastic, hi
index, and polycarbonate lenses. Ideal for
tinting lenses with salt or hard tintable scratch
coatings. Stirring action eliminates surface
tension that causes dye boil-overs. Split Lids
- minimizes evaporation and reduces energy
costs. Eliminates need to remove lid while
tinting lenses. Solution temperature will not be
affected by the position of the lid (up or
down). Non-stick Vats - dyes are easily
cleaned, eliminating scrubbing and scouring
of each tank. The system is designed with the
production lab in mind, heating up to six different colors at one time with each color
independently controlled with its own temperature controller and variable speed stirrer.
Each tank incorporates a temperature probe
to directly reflect the corresponding dye temperature accurately through a digital read-out.
The 6STR requires a very long HTF content of
only 15 ounces (443mL) per tank. The HTF
used in the 6STR system is a water soluble,
environmentally safe, non-hazardous blend.
The unique design makes it virtually impossible to contaminate the HTF. The durable stainless steel construction of the system will provide years of trouble-free lens tinting in your
lab. Use the OptiSafe Digital Super Tinter
6STR in conjunction with the OptiSafe Lens
Dye Packets, and experience the fastest
absorbing, most consistent, vibrant tinted
lenses achievable. Specs: 1800W. 120VAC /
60Hz, 230VAC / 50Hz (optional). Size: 28” x
11” x 13”h (lid down), 15”h (lid up).
One year warranty (parts and labor) from the date of
purchase.
Production Tinting System, Model 6V
Tinting System Model 2V
Phantom
Two stainless steel quart-sized tanks (or up to
four mini-sized tanks) in Black copolymer
housing for minimum heat radiation and maximum thermal insulation. Designed for optimal
performance in heating optical lens coloring
solutions and other similar applications. One
550W or 750W stainless steel heating ele- Contact Phantom for current pricing.
ment. Electronic temperature controller. ETL
Tinting System, Model 4VS 4 x 2
approval. UV treatment starter kit included at
Phantom
no extra charge. 11” x 10.85” x 9”.10lb
(Shipping weight.)
Tinting System, Model 9VS
Phantom
Phantom
Six stainless steel quart-sized tanks (or up to
12 mini-sized tanks) in Black copolymer housing for minimum heat radiation and maximum
thermal insulation. Designed for optimal performance in heating optical lens coloring solutions and other similar applications. One
1600W stainless steel heating element.
Electronic temperature controller. ETL approval. Tinting starter kit included at no extra
charge. 16-5/16” x 15-1/8” x 9”. 22lb (shipping
weight).
1P
Phantom
Phantom
The heating system model 9VS consists of
nine stainless steel quartsized tanks (vats) in
heat radiation, and maximum thermal insulation. Model 9VS is designed for optimal performance in heating optical lens coloring
temperature range from 60F to 250F. The
standard nine-quart sized vat unit can hold up
to 18 mini-sized vats (optional).The system
incorporates one 1600 Watt stainless steel
heating element, designed specifically for
heating Opti-Safe Heat Transfer Fluid without
burning it. This is a common problem in many
heating units. Opti-Safe Heat Transfer Fluid is
the recommended heating medium for this
system. 25” x 17” x 8”. 41lbs. 120 VAC, 60 Hz
(230 VAC, 50 Hz optional).
The heating system Model 4VS 4 x 2 is a 4
mini-tank/2 quart Dual Temperature Control
Dye Heating System. The system is housed in
stainless steel for minimum heat radiation and
maximum thermal insulation. The system is
ideal for heating lens dyes, UV solution, neutralizer and other optical chemicals with a
temperature range from 60°F to 250°F (16°C 121°C). The system incoprporates two 550
Watt stainless steel heating elements and two
separate HTF tanks with dual temperature
control thermostats. The 4VS 4 x 2 Model is
designed specifically for heating OptiSafe
Heat Transfer Fluid without burning it.
OptiSafe Heat Transfer Fluid is the recommended heating medium for this system. Size: Contact Phantom for current pricing.
19.5” x 11” x 9”. Weight: 28lbs. 120VAC/60Hz
Vat Removal Tool/Drip Tray
(Standard), 220VAC/50Hz (Optional).
Phantom
Tinting System, Model 6V 4 x 4
Phantom
This convenient stainless steel tool helps you
safely and easily remove quart and mini-size
vats from the dye heating system. Locking
feature securely holds vat in place while discarding solution. The Drip Tray (optional) easily attaches to the vat, helping to contain
drips. The Vat Removal Tool used in conjunction with the Drip Tray helps to eliminate
chances of scalds, burns, drips, and other
hazards associated with the discarding of hot
solutions.
Production dye heating system holds 2-1/2
gallons of solution. Automatic stirring action.
Automatic water replenishing. Temperature
controller keeps solution temperature stable
within ±1° C. Can be hooked directly to water
line, or use submersible pump. Unit comes
with a built-in solution siphoning system for
safe and easy discarding of solutions. ETL
approval.
Nine stainless steel quart-sized tanks (or up to
18 mini-sized tanks) in Black copolymer housing for minimum heat radiation and maximum
thermal insulation. Designed for optimal performance in heating optical lens coloring solutions and other similar applications. 1600W.,
stainless steel heating element. Electronic
temperature controller. ETL Approval. Tinting
starter kit included at no extra charge. 23-1/8”
x 15-1/8” x 9”. 30lb (shipping weight).
4 stainless steel quart size tanks and 4 mini
(pint) size tanks housed in black copolymer
housing for minimum heat radiation and maximum thermal insulation. Designed for optimal
performance in heating lens dyes, UV solution, neutralizer, and other optical solutions.
One 1600 Watt stainless steel heating element. ETL approved. Tinting starter kit included. Size: 16-5/16” x 15-1/8” x 9”. Weight: T500 Vat Removal Tool, 5.5”h x 4.4”w x 2.2”d. 8oz. . . .
$29.95
22lbs.
T505 Drip Tray, 3.7”h x 6.6”w x 5.2”d. 8oz. . . . . $19.95
10/12/11 11:11 AM
88
LENS DYEING
Dyeing Equipment
PSI-BPI Solar Color 9 Tint Unit
Pot Lifter (84.0015)
PSI
Vigor Optical
Dyeing Supplies
Vortex Digital Tinter 4
AR Dry Stripper
Phantom
BPI
Back by popular demand is an enhanced
strength pot lifter from Vigor. Heavy gauge
The full line of BPI’s tinting instruments are all stainless with reimforced handle the new pot
available through Practical Systems, Inc. at lifter will safely lift and carry quart tint pots.
manufacturers prices. Unit pictured holds 9
Total length 15 1/4”. . . . . . . . . . . . . . . . . $24.00
quart tanks or up to 18 mini tanks, providing a
Easy to use, fast, requires only a few minutes
to return the lens to its pre-coated condition.
variety
of
product
capabilities.
Call
for
the
7000 GR8*Tint IX Tank Base
Vortex Digital Tinter 4 is an advanced generaLenses can be recoated with AR, colored or
system that meets your needs.
tion four vat(tank) tinting system combining 17801
Western Optical
UV treated with any BPI dye. This process is a
four accurate digital “auto-tuning” PID tem- Contact PSI for current pricing.
laboratory procedure and should be done by
perature controllers with bright LED displays
trained personnel.
Gradient, Automatic No-Line
80909 3 pack
showing the desired (set) and actual (mea80910 single
Santinelli
sured) temperatures of each tank. Each tank
has an individual digital process timer to
BPI Spotless™
monitor tinting times. Vortex 4 incorporates
BPI
variable speed stirring, hinged-linds that do
not need to be removed when tinting lenses,
and special coated easy to clean stainles
Replace only what you need! Utilize your
steel vats for heating lab chemicals. The
existing dye tanks and chemicals and save
temperature (not HTF temperature), preventmoney. The GR8 Tint base is streamlined for
ing messy boil-overs. The detachable probe
power efficiency. Heats nine quart size stainallows for easy vat removal and cleaning.
less steel dye tanks. Specs: 23-1/2” W x
Vortex 4 is simple to use and is the perfect For both solid and gradient tinting with abso- 8-1/4” H x 15-1/2” D
machine for fast absorption of tints and UV lutely no line, this state-of-the-art micro com- 7000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $599.00
puter produces an automatic perfect gradient
into coated polycarbonate, hi-index, and
7000Export 220 Volt . . . . . . . . . . . . . . . . . . . . . $599.00 Stop blotches and white spots! Many hard
tint in just seconds. Includes one lens holder
resin lenses will exhibit blotches, white spots,
CR39 lens materials. Specs: 20.9”x14.2”x11.5”
and UL-approved power adapter.
7005 GR8*Tint IX Tank Kit
and unusual color variations due to ionic and
(lid down), 15” (lid up) 44 lbs shipping wieght; Contact Santinelli for current pricing.
irregular surface changes. These lens surface
Western Optical
120 VAC, 60 Hz or 230 VAC, 50 Hz
Tinting Machine, 9 Vat
difficulties can be minimized by using one
capful of BPI Spotless™ to a quart tank of BPI
Santinelli
tints.
PSI-BPI 4-Stroke Gradient
37891 8oz. bottle
37894 4 oz pearls
PSI
BPI Stabilizer™
BPI
Practical Systems carries the full line of BPI
gradients. Pictured is the 4 Stroke Gradient
which has a built-in timer that automatically
turns it off and removes the lenses from the
dye when the cycle is complete. 7lbs. 115 or
220V available. 7”h x 6”w x 6”l.
12501
Everything you need to create beautiful tinted
lenses is included in this package deal.
Includes GR8 Tint base, heat transfer fluid (15
quarts), Dip ‘n Done dye (9 pack), neutralizer
(1 quart), quart stainless steel tanks (9), quart
tank lids (9), tank spacer bar (2), dual lens
clamp and precision glass thermometer.
Nine stainless steel quart-sized tanks (vats), in
black copolymer housing for maximum thermal insulation. Designed for optimal performance in heating optical lens coloring solutions and other similar applications. Features
two stainless steel heating elements so that 7005 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $999.00
the fluid will not burn or produce unpleasant 7005Export 220 Volt . . . . . . . . . . . . . . . . . . . . . $999.00
odors. Even temperature throughout the sysThe Dip ‘N Done GR8*ient Maker
tem as well as provisions for spillage.
Western Optical
Maximum energy conservation. Also available
in 4 and 6 vat size.
PSI-BPI Advanced Computer
Gradient Tinter - Automatic
Gradient 6
Sentilles
After prolonged use, the normal pH of tint
solutions may change from a neutral 7. This
can be caused by caustic cleaning solutions
used on the lens before tinting. This change
can cause some types of coatings to be
weakened or partially removed during tinting.
BPI introduces a pH stabilizer for your tint
tanks. A capful of BPI Stabilizer™ will keep a
tint bath in the 7 pH range without affecting
the colors of your tints.
8oz. bottle
PSI
BPI® Absolute Black™ & BPI®
Absolute Brown™
BPI
Ideally suited for volume production. Practical
Systems offers the BPI computer gradient
that can control up to six gradient heads independently. It offers multi-tasking capabilities
and accurate control over timing and uniformity of dimension. Computer is 15”h x 9.5”w x
6”l. 115/220V. Call PSI for information on other
BPI gradients.
12603
Free standing automatic gradient tintor with
adjustable extending arm and timer with audible alarm. Unique dual motor feature eliminates definite line in gradients. Non-recurring
arm motion insures step-less color progression of gradient tints. Available with one or
two arms. Lens holders available in black or
color coded. MC and Visa accepted.
297-005 Lens Holder - Black
297-050 Lens Holder - Color Coded, (Specify color:
Black, Blue, Brown, Green, Pink, Yellow)
297-100 Auto Gradient Tintor - 1 Arm
297-200 Auto Gradient Tintor - 2 Arms
Enjoy the benefits of producing continuous,
blended line free gradients with virtually no
hand re-working. Features a seven-position
stroke and continuous cycling. Automatic
operation frees up valuable time while producing sunglass opacity lenses in as little as
15 minutes. Engineered to produce superior
gradients that will enhance your reputation for
quality craftsmanship. Fully adjustable and
compatible with any lens tinting system. The
GR8*ient Maker comes complete with lens
clamp and instructions. Western guarantees
quality components and construction for trouble free performance.
7040 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $240.00
Tint to tv = 20% in 6 minutes, The longest lasting, maximum concentration fade-resistant
tints for dark coated and uncoated sunglass
lenses. Absolutely no red flair.
30201
31105
46305
48802
10/12/11 11:11 AM
LENS DYEING
Dyeing Supplies
GL77
Odor Lid
Spotless Pearls
BPI
BPI
BPI
89
BPI® Total Day™
BPI
GL77 heats quickly and evenly to maintain the
high temperatures required for lens tinting
operations. GL77 helps to preserve the interior of lens tinting systems and protect the
Blocks light spectrum linked to cause of heating elements.
Macular Degeneration. Total™ UV Protection 65901 G
along with Blue Light (HEV)reduction with 70302 Gallon
unimpaired color vision.
Eliminates blotches, white spots and color
variations from hard coated lenses when the
Traps vapors in a liquid molecular filter to tints have been mixed with distilled or deionized water.
leave lab without a trace of chemical odors.
37894
71002
Polyclear-Odorless Color Remover
Water Soft™
BPI
BPI
HTF-90
# 37619
BPI
BPI® Total Night™
BPI
An odorless neutralizer for lightening or
removing color from most plastic, including
Silicone-based Heat Transfer Fluid maintains coated polycarbonate. Can be used in any
high uniform heat and temperature tolerance. standard dye system.
HTF-90 is the only dye system fluid that BPI 41200 Gallon
Blocks light spectrum linked to cause of approves for safe operations in the lab envi- 41210 Quart
Macular Degeneration. Total™ UV and HEV ronment. Helps protect the heating element Contact BPI for current pricing.
Protection Night time driving vision relief.
and tanks as well as the base interior of the
Red Out
# 37629
dye unit. Must be changed whenever it turns
BPI
dark.
Brown™
BPI
Modifies the hardest water, acts as a sequestering agent for multivalent metallic ions. Use
for surfacing solution or add a few drops per
quart of dye solution for better color. Pint.
71600
Xcelerator
BPI
65900 Gallon
70300 Quart
Lens Prep II
BPI
The unique chemical structure of this tint
makes it more stable and reduces tinting
times. The BPI® Ultra Gray™ and BPI® Ultra
# 31106 Gray
# 31107 Brown
Color Developer
BPI
Speeds up the dye cycle by 65%. It clears the
way to tint lenses better, faster and with consistent color, without spots or blotches. Longlasting and super-concentrated. Add to dye
tank just once and dye will last longer.
Helps eliminate one of the most common dye Reduces evaporation by more than 300%.
71001
problems: Red tones in a Dark Gray or Dark Contact BPI for current pricing.
Brown lens. This color correction is made by
Opti-Speed® Neutralizer
simply dipping the lens for a few seconds into
DAC Vision
hot solution.
Conditions CR-39 lenses with a special ioniz- 37844
ing agent that leaves a positive charge on lens Contact BPI for current pricing.
surfaces. This enables the lenses to quickly
Smells So Good!
and evenly absorb negatively charged BPI
Molecular Catalytic dyes. Dissolves oil and
BPI
grease. Can be used cold, works best when
heated.
70200 Quart
72400 Gallon
Removes color dye from plastic lenses.
Standard packaging, 12 quarts to a case.
Neutralizer II
ST-391G gallon (3.8 liter)
STl-391Q quart (0.95 liter)
BPI
ST-386G Heat Transfer Oil
DAC Vision
Add a few drops to your dye tanks and freshen up your entire lab. Eight fragrances are
available in either a six pack or individual
bottles.
71004 Strawberry
71005 Coconut
Reduces streaking and spotting of dye, eliminates agglomerations and re-suspends dye
pigments for color uniformity. Add a few drops
daily to your dye solution for consistently vivid
colors. A must for I.R. Gray. 6oz. bottle.
71502
71006 Jasmine
Self-cleaning. Removes dye from CR- 39
71007 Potpourri
lenses. Works on most dyes in an approved
71008 Lilac
standard dye system. One quart neutralizes
71009 Peach
hundreds of lenses.
70100 Quart
72100 Gallon
71010 Honey-suckle
71011 Cinnamon
A heavy, slow liquid designed to distribute
heat evenly in tinting tanks of all types.
Available in gallons. Standard packaging: 4
gallons per case.
ST-386G
10/12/11 11:11 AM
LENS DYEING
90
Ultra White UV™
sive odor. Highest attainable temperature is
214°. Some neutralizers can reach 230° and
cause nearby dyes to boil over. Low vaporization factor and no lens yellowing. Evaporative
losses are replaced with tap water.
Dynamic Labs, Inc.
Neutralizer WB II
Lens Prep Concentrate
Dyeing Supplies
Phantom
Phantom
mable additive for lens dyes. Minimizes
blotches and white spots when coloring hard
resin lenses. Directions: Add one capful of
OptiSafe Spot Free additive to one quart of
OptiSafe Lens Dye.
C463 Quart
C464 Gallon
UV Treatment, AR Compatible
Advanced Phantom UV Formula
Phantom
Cleans by removing oil and dirt from the surface of the lens. It enables lenses to absorb
color evenly without spotting or streaking.
MPF™ Multi Purpose Formula
Ultra White™ provides fast acting UV protection for your lenses without the possibility of
Phantom
discoloration. Unique non-clumping formula
reduces the need for stirring. Treats up to 400
lenses. This is offered either with, or without
scratch coat protection.
UV/Dye combination
Dynamic Labs, Inc.
An optical dye additive that increases dye
temperature, reduces evaporation and
absorbs odor (depending on dye quality).
Produces better quality tint and saves energy.
Works effectively with almost all conventional
optical lens dyes. 4 fl. oz.
A concentrated water base neutralizer
designed to effectively and safely remove
color from CR39, polycarbonate, and hi index
lenses. The 8 fluid ounce concentrate bottle is
mixed with water to make one quart of neu- An optical lens formula for making any CR-39
tralizer. Evaporative losses are replaced with lens capable of absorbing ultraviolet radiation
tap water.
up to 400nm in a simple treatment process.
C352
Compatible with Anti-Reflection coating proContact Phantom for current pricing.
cesses. One bottle will treat 150 pair of lenses.
Red Remover Dye, Opti-Safe®
Proven effectiveness, will block UV radiation
up to 400nm in five minutes. Treatment is
Phantom
permanent. Treated lenses can be tinted and
coated. Treated lenses have virtually no color.
No offensive odors. Concentrated. Dilute formula with same amount of water. No baking,
expensive equipment, or pressure cookers
needed.
Neutralizer 39X
UV Treatment, One Minute (Packets)
Phantom
Phantom
Special dye formulated to remove the red
tones from gray and brown tinted lenses. Dip
lenses into solution for a few seconds until
color is correct. Used the same way as conventional optical lens dyes. 3 fl. oz. concentrate.
Fast and convenient. Tint and UV treat your
lenses at the same time! Complete UV treatment and tinting in as little as 4 minutes!
C200-90
Heat Transfer Fluid, Opti-Safe®
Scratch Guard
Phantom
Color neutralizing formula designed specifically for CR-39 lenses. Neutralizer 39X is used
in full strength (not diluted with water), has a
very low rate of evaporation, and will not yellow lenses.
Phantom
An optical lens formula for making any CR-39
lens capable of absorbing ultraviolet radiation
This fast absorbing formula is compatible with
Anti-Reflection coating, tinting and scratch
resistance coating processes. The formula is
packaged in water dissolvable bags. Available
as UV treatment, Item #C351, and also as UV
with additional Scratch Resistance properties
(SRP), Item #C351S. UV treat lenses easily by
dipping the lens into UV solution heated to
205 - 210°F (96-99V°C) for 1-5 minutes.
Features: 300+ lenses per packet; AR compatible; Non-Yellowing; Extended Shelf Life (1
year); Low shipping costs (each packet
weighs less than 1oz.); 1-5 minute treatment.
Neutralizer Poly-C
Phantom
Yields maximum caloric transfer from heating
unit energy source to dye vats while maintaining stable and uniform dye temperature. Nontoxic, non-hazardous, biodegradable, completely miscible in water.
Lens Prep
Phantom
Color neutralizing formula designed for polycarbonate, CR-39, and acrylic lenses.
Neutralizer Poly-C is used in full strength (not
diluted with water), has a very low rate of
evaporation, and will not yellow lenses.
Neutralizer WB
Phantom
Two to three second dipping process for plastic CR-39 lenses. Scratch Guard produces a
microscopic film with desirable properties for
eyeglasses, such as: Scratch-resistant;
Hydrophobic; Anti-static. The Scratch Guard
treatment is always done as a final step. If the
lens needs to be tinted, or UV treated, then do Contact Phantom for current pricing.
the UV treatment first followed by the tinting UV Treatment, Opti-Safe® Formula I
process, then by the Scratch Guard treatment.
Phantom
The material is packaged in quart and gallon
sized containers. It should be stored in a cool
area at a temperature below 90°F (32°C).
Shipping weight per quart is approx. 2lbs.
Shelf life: 4 months.
C520 32 Fl. Oz. Bottle
C522 Gallon Bottle
Spot Free, Lens Dye Additive
Phantom
Phantom Lens Prep is important in the lens
tinting process. It quickly removes oil, spots,
and dirt that causes streaking, and spotting of
tinted lenses.
C403 Quart
C404 Gallon
A water-based neutralizer, designed to
remove color from plastic CR-39 lenses faster
than conventional neutralizers with no offen- Environmentally safe, effective, and non-flam- Contact Phantom for current pricing.
AR compatible. One bottle will treat 500+
lenses. Proven effectiveness, will block all UV
radiation up to 400nm in three to eight minutes. Concentrated. Dilute with 24oz. of water.
Clear formula. No boil overs, no clumps or
thick formulation. 8 fl. oz. concentrate.
10/12/11 11:11 AM
LENS DYEING
Dyeing Supplies
91
Easy Clean
SRT (Scratch-Resistant Treatment)
Dyeing Tissues and Towels
PSI
PSI
Sentilles
UV Treatment, Opti-Safe® Formula II
Phantom
Easy Clean is a water-repellent treatment for
plastic lenses. It is ideal for A/R coated lenses
because it prevents smudging. Lenses treated
AR compatible. One bottle will treat 200+
lenses. Proven effectiveness, will block all UV
radiation up to 400nm in five to 10 minutes.
Concentrated. Dilute with 28oz. of water.
Clear formula. No boil overs, no clumps or
thick formulation.
with Easy Clean wipe clean easily and stay
clean longer. Treatment is applied by cold dipping the lenses for 1-2 seconds.
#2125L Gallon
Excellent for spec-free preparation prior to
dyeing. Absorbent tissues and towels are
A scratch-resistant treatment for CR-39 lens- ideal for cleaning lens surfaces. No wood
es that is not a coating and will not build up, fibers–great for all lens surfaces.
crack, craze or peel after it has been applied. 1-17524 tissues, box of 300
After treatment with SRT, lenses are protected 1-17524-20 tissues 300/box, 20boxes/case
on both sides. Tints should be applied after 1-17524-60 tissues 300/box-60 boxes
treatment to eliminate contamination. Easy to 1-17526 towels, box of 90
use. SRT will not affect the optics of any sin- 1-17526-15 towels 90/box, 15 boxes/ case
gle-vision, bifocal or multifocal lens.
1008 Quart
1008G Gallon
H.T.F.
UV Shield
PSI
PSI
Lens Cleaner
Sentilles
C340 4 fl. oz. concentrate
UV Treatment, OptiSafe® Formula III
(Gel Paste)
Phantom
PSI’s UV Shield is UV protection that will
Heat transfer fluid provides even heat distri- become part of the lens. Will not scratch, fade
bution eliminating hot spots. HTF will prevent or deteriorate over time. Permanently impregnates the lens and will not Yellow. Blocks 98%
interior rusting.
of all harmful UV rays. UV Shield offers 1- min2138 Quart
ute application with a pot life of 3-4 weeks,
2138G Gallon
depending on usage.
This fast absorbing formula is compatible with
Anti-Reflection coating, tinting and scratch
resistance coating processes. The formula
comes in concentrated paste packaged in
water dissolvable bags. Available as UV treatment (Item #C347), and also as UV with
Scratch Resistance Properties (Item #C350).
UV treat lenses easily by dipping the lens into
UV solution heated to 205 - 210°F (96-99V°C)
for 5-10 minutes. Features: 200+ lenses per
packet; AR compatible; Non-Yellowing;
Extended Shelf Life (1 year); Low shipping
costs (each packet weighs less than 1oz.);
5-10 minute treatment.
2001 UV Concentrate
PSI
Item #700 Quart
Alcohol for Dyeing
PSI
Sentilles
Lens rinses sparkling clean leaving no residual contaminates to interfere with dyeing, coating or other down line processes. Pump dispenser available for easy dispensing.
1-4091-008 8oz.
1-4091-032 Quarts
1-4091-128 Gallons
1-4249 Pump Dispenser
Lens Cleaner for Dyeing
Sentilles
Filtered isopropyl alcohol provides high qualGet rid of stubborn dye stains with Quick ity and purity for dyeing applications.
1-2023 Isoprophyl Alcohol Filtered. 1 gallon or 4 gal-
Clear Hand Cleaner from PSI. Easily remove lon.
stains by applying to skin and rubbing until Quantity discounts available.
Cleans all lens surfaces. Perfect for final
AR STRIPPER & COATING REMOVER washup or dye preparation. Lens rinses sparSentilles
210 8 oz. bottle
kling clean leaving no residual contaminates.
Pump dispenser simplifies use. Available in
quarts and gallons.
1-4091-032 QTS
1-4091-128 Gallons
Quick Clear Lens Neutralizer
PSI
Lens Cleaner Scrub Pads
Sentilles
Removes AR coatings and scratch resistant
coatings, allowing lenses to be re-coated,
dyed, or UV treated. Dip lens in solution 45 to
60 seconds (Poly 60 seconds max), rinse, and
wipe dry for a clean, clear lens without residue. Kit includes 16oz. Approved by Zeiss
AR. Clean AR coating bell also. Stripper-Dish2001 UV Concentrate is the ultimate in UV
Lens Holder-Goggles & Gloves.
Eliminates
tints
from
lenses
so
they
can
be
protection. It provides 99.9% UV protection
1-2010-016
and will not yellow or fade over the life of the retinted. Works for both CR-39 and polycar- AR Stripper -Pint (Case 8 Pints)
prescription. Treatment requires 2 minutes or bonate lenses. Quick Clear has a low evaporaless and one bottle will treat approximately tion rate and is self-cleaning and non-toxic.
Quick Clear will not yellow lenses.
200 pair of lenses
777 4 oz. bottle
711G Gallon
1-2010-032
AR Stripper -Quart (Case 12 Quarts)
1-2010-128
AR Stripper -Gallon (Case 4 Gallons)
1-2010-KIT
AR Stripper Kit
Use before or after dyeing to remove residues.
Works well with SOS Lens Cleaner.
1-4090 package of 12 scrub pads, each measuring
2-1/2” by 4”
10/12/11 11:11 AM
92
LENS DYEING
Dyeing Supplies
Spectra-Tint Neutralizer
BPI I-Tints
Vigor Optical
BPI
BPI® Absolute Black™ & BPI®
Absolute Brown™
BPI
Neutralizer
Sentilles
Pre-mixed, for reducing or removing colors
from all plastic lens surfaces. Simple to use, Extra bright fashion colors. Colors available:
pour contents into stainless steel chamber Lime, Strawberry, Blueberry, Graphite, Grape
and bring operating temperature to 250°F and Tangerine. 3 oz. bottles (makes one quart
Fast tint removal from polycarbonate, CR-39 (96°C).
of tinting solution).
and High-Index. Removes dye from any plas- 84.391 Qt.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $26.00
84.391P Polysafe Qt.. . . . . . . . . . . . . . . . . . . . . . $26.00 Contact BPI for current pricing.
tic lens back to clear without harming lens or 84.402 Gal.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $76.00
BPI Lens Tinting Pills
coating. Odorless, non-toxic, biodegradable. 84.402 Polysafe Gal. . . . . . . . . . . . . . . . . . . . . . . $76.00
1-3420-032 Quarts
1-3420-128 Gallons
6058 GR8*Tint Replacement Parts
BPI
Western Optical
Polycarbonate Neutralizer
Sentilles
Tint to tv = 20% in 6 minutes, The longest lasting, maximum concentration fade-resistant
tints for dark coated and uncoated sunglass
lenses. Absolutely no red flair.
30201
31105
46305
48802
BPI® Filter Vision 450™, 480™, BPI®
Diamond Dye 540™, 500/550™, BPI®
Monochrome 600™, BPI® FL-41™,
BPI® Deep Blue Zee™
BPI
The BPI® Pills® are easy to use, all you do is
Formulated to remove color from polycarbonate lenses quickly without affecting coatings.
Odorless and safe. Will not affect the adhesion or surface of coated lenses. Can be used
in any standard dye system.
01-3401-128 Gallon
01-3401-32 Quart
Tissue Dispenser Stand
Sentilles
6058 Quart stainless steel tank, 4-1/4”w x 4”h x
6-7/8”d . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $22.00
6059 Quart Stainless Steel Lid, 4-1/4”w x 6-5/8”h . . . .
$14.00
6061 1000mL Glass Beaker, 3-1/2”diameter x 7-1/2”h
$24.00
6066 Precision Glass Thermometer, 8-1/2” . . . . . $7.50
6068 Tank Spacer Bar. . . . . . . . . . . . . . . . . . . . . $12.00
Dyes
BPI Crystal Clear
BPI
add water. The BPI® Pill® is more than just a
new way to package chemistry, it is the technology of the future. If you are either a large These therapeutic dyes can benefit patients
laboratory or a small office, this is the new with: Macular degeneration, Retinitis pigmentosa, Developing cataracts, Aphakia and
way to make lens coloring and UV processing pseudophakia,
Diabetic
retinopathy,
easier while saving time and money. Each Parkinson’s - Dyskinesias, Aniridia, Albinism,
BPI® Tint Pill® can color more than 100 Optic atrophy, Corneal dystrophy, Glaucoma.
By reducing glare you usually improve conlenses. Each BPI® Neutralizer Lite Pill® will
trast and functional acuity. Research has
remove unwanted color density from hun- shown that 80% of patients who wear antidreds of lenses without changing the color or glare lenses call them the best sunglasses
they’ve ever worn, 80% experience sharper
leaving an interfering surface residue that can
vision, better depth perception, 87% report
affect AR coatings. Each BPI® UV Caplet™ significantly reduced glare and haze.
will UV protect about 100 lenses to ANSI Z80.3
standard in just a few minutes. Each BPI®
94% call the lenses beneficial.
Lens Prep Lite Pill® will condition, clean, and Contact BPI for current pricing.
ionize hundreds of lens surfaces reducing
BPI® PC Edge Coat™
spotting, streaking and splotches. The deep
BPI
ionic charge will reduce lens color variation
and long term fading. The BPI® Pill® colors,
Tissue holder dispenser stand allows for easy
removal of one tissue at a time. Inverted box
helps protect lint-free tissue from airborne
contamination. Great for use throughout the
lab or at the dispensing table.
1-17525
Tissue Dispenser Wall Mount
A new UV dye, developed after five years of
research. This UV treatment never boils over,
wears out in the tank or clumps up. Each
bottle will protect hundreds and hundreds of
lenses for only a few cents per pair. Meets US
standard ANSI 280.3.
37690
BPI Diamond Dye 400nm Ultra Hard
Lens Prep and Neutralizer-Lite are available in
2-pack envelopes. The BPI UV Caplet™ is
available in 1 unit envelopes. BPI® Pills®
have a shelf life of up to 5 years.
BPI XP-Tints™
BPI
BPI
Pastel edge tints for rimless lenses, Available
colors: Blue, gray, brown, yellow, green, red.
# 42509 Gray
# 42510 Brown
Sentilles
BPI® Total Day™
BPI
Anti-reflection coated lenses require extra
Tissue holder dispenser wall mount allows for
easy removal of one tissue at a time and frees
up valuable counter space. Inverted box helps
protect lint-free tissues from airborne contamination. Great for use throughout the lab,
machine mounted or at the dispensing table.
You can now UV protect and hard coat your
patient’s plastic lenses in only a few minutes
with a BPI lens tinting system. BPI UV
Diamond Dye™ ULTRA HARD is the best and
longest lasting UV and hard coating protection available. Makes uncoated plastic lenses
up to 200% more scratch resistant and UV
protects to 400nm.
75-7004
37112
performance tints. The AR coating process
can stress a normal tint to the point of failure.
The cleaning and coating processes each
have the ability to remove color density from
Blocks light spectrum linked to cause of
the lens. BPI XP-Tints™ have the extra perfor- Macular Degeneration. Total™ UV Protection
mance to resist the demands of these pro- along with Blue Light (HEV)reduction with
unimpaired color vision.
cesses.
# 37619
10/12/11 11:11 AM
LENS DYEING
94
Dyeing Supplies
BPI® Total Night™
BPI
34410 I.R. Blue
34500 I.R. Brown
34910 One 3oz. bottle of each color and one 6oz. bottle of Color Developer
Molecular Catalytic™ Dye
BPI
Tints. It’s designed for heightened contrast
ability and is recommended as restful sunglasses. For use especially while boating and
for general spectator activities.
UV Only™
BPI
42800 3oz. bottle
42901 box of six
Tennis Tint
Yellow that spectroscopically matches the
Yellow color of the tennis ball usually used in
play. Blue is absorbed, highlighting the ball
and increasing contrast visibility against
background colors.
42804 3oz. bottle
42904 box of six
Swiss Pastel™ Dye
BPI
Blocks light spectrum linked to cause of
Macular Degeneration. Total™ UV and HEV BPI Molecular Catalytic tints remain stable
under extremely punishing lab conditions and
Protection Night time driving vision relief.
offers brightness and uniformity of color.
# 37629
Increases hardness of lenses up to 80%;
reduces drying time up to 60%. Choose from
more than 100 colors, available in 3oz. plastic
Brown™
bottles and money-saving six-packs. Each
bottle makes one quart of dye solution and
BPI
tints hundreds of lenses. Some colors available in lab quarts and five gallon containers.
Silor Super Shield™ Dyes
BPI
The unique chemical structure of this tint
makes it more stable and reduces tinting
times. The BPI® Ultra Gray™ and BPI® Ultra
# 31106 Gray
# 31107 Brown
Diamond Dye 500/550
BPI
matrix. Protection will last for the life of the
lens. The process takes as little as 10 minutes
and lenses are virtually clear after treatment.
Lenses can be tinted after UV process.
37700 Pint
UV Solar Dyes
For a high-fashion look in subtle pastels,
offered in 7 colors: Swiss Pastel Strawberry,
Swiss Pastel Blueberry, Swiss Pastel Peach,
Swiss Pastel Raspberry Ice, Swiss Pastel
Pumpkin, Swiss Pastel Butterscotch and
Twilight Blue. Each 3oz. (90ml) bottle of concentrate makes a full quart (95-l). Available in
individual 3oz. (90ml) bottles or in a 6-pack.
UV Diamond Dye 400nm
BPI
The first High Definition SunLens Dye. Solar
Dyes will produce a lens with the greatest UV
protection. At the same time it will allow
greater visual acuity and contrast definition.
Available in 3oz. bottles or six-packs.
Guarantee quick consistent tinting of Super
Shield Coated lenses. Part of the Molecular
Catalytic line, they inherently bond and
become part of the lens matrix. No need for
double dipping. Available colors are Gray,
Brown, Dark Brown, Blue, Pink, Green, Red
and Yellow.
37829 Solar Black
37830 Solar Brown
Sport Tints Designed Spectrum™ Dye Absorbs 99% of UV light under 400nm. Almost
BPI
37604 Diamond Dye 500/550 4 oz.
37605 Diamond Dye 540 4 oz.
I.R. Dyes
BPI
BPI
36300
30001 Six pack. Also available in 3oz. bottles.
Absorbs harmful ultraviolet and Blue light.
Depending on time of immersion, Diamond
Dye 500/550 absorbs from UV to 500nm
(Amber-Orange) or from UV to 550nm (RedOrange). Almost all hard resin lenses can be
treated. Also increases contrast and depth
perception. Lenses treated with this are
Orange-Amber in color, much like the Corning
CPF lenses. One bottle treats up to 100 pair of
lenses. Diamond Dye 540 absorbs UV and
Blue light and Red end of the spectrum, making it a highly effective sunglass for superior
vision.
Absorbs up to 99% of harmful ultraviolet light.
Can be used in any lens coloring system.
During the treatment process, the lens is
cured and the dye becomes a part of the lens
all hard resin lenses can be treated. It also
increases scratch resistance up to 200%.
Treating is easy in any dye system. Check
absorbency in BPI UV or UV/Visible Digital
Spectrometer. Pint bottle treats up to 200
lenses.
Video Comfort Dyes (VDT Tints)
BPI
37100 Pint Bottle
UV Diamond Dye 400nm XL
BPI
Due to their specific light frequency absorption and areas of transmittance, these specialized tints increase visual acuity for the sports
participant and spectator.
For increased contrast and user comfort while
viewing video screens. Available in three colors to match the spectral content of the common VDT. Available in 4oz. bottles.
Golf Tint
Green with Brown overtones. Its light frequency absorption was specially designed to
increase the ball’s contrast against the Blue
sky and the fairway.
37707 VDT Green for Green screens
37708 VDT Amber for Amber screens
37709 VDT Blue for White screens
42802 3oz. bottle
42902 box of six
Same UV protection and scratch resistance as Contact BPI for current pricing.
UV Diamond Dye in less than 15 minutes.
Skeet Tint
37101 Pint
Reddish-Orange with a Tan flare. Developed
for the expert who wants to increase his skill
when shooting at the clay pigeon or tracking a
target. Increased background lighting brings
the target visually closer for sharper distance
estimations.
BPI Dyes
DAC Vision
UV Only XL
BPI
42805 3oz. bottle
42905 box of six
Ski Tint
Brown with a Red-Orange Flare. Absorbs light
in the ultraviolet region as well as the Blue and
Violet regions from the snow and sky. Depth
These dyes are available for those who want perception is highly increased.
42803 3oz. bottle
specialized sunglasses for darker shades and 42903 box of six
modification of the near infrared which reduces glare and the Red overtones for maximum Sport Tint
eye comfort.
34400 I.R. Gray
UV dye easy-to-use in less than 10 minutes.
Brown with a Greenish-Bronze flare. Its spec- 37699 Pint
trum is a combination of the Golf and Ski Contact BPI for current pricing.
DAC. distributes the full range of BPI dyes,
neutralizers, lens prep, HTF-90 and other
related chemicals.
10/12/11 11:11 AM
LENS DYEING
UV Dyes
Dyeing Supplies
OptiSource
Dry Dye Packet
OptiSource
OptiSource Dyes, including these built-in
UV’s, are leaders in the OPTICAL tinting industry, using cutting edge technology to produce
chemically SUPERIOR dyes. The use of dye
stabilizing chemistry produces FAST absorbing dyes that provide consistent colors from
bottle to bottle and lens to lens. OptiSource
top performing UV Dyes are available in 4 oz.
concentrated bottles. Our super-concentrated
dyes are both non-toxic and biodegradable.
These are same great dye colors you have
grown to love with UV inhibitor incorporated.
Available in 10 high fashion colors.
Our popular, no-shift dyes are also available in
convenient, dissolvable Dry Dye Packets.
Simply drop a Dry Dye Packet into water and
watch it dissolve into a concentrated dye
bath. Each packet is factory sealed and
inspected to ensure a consistent, quality
product. These revolutionary dyes weigh less
than 1 oz., are 3 x 3” in size and can EASILY
UV DYE
be shipped in mailing envelopes for conveOWC
nience. Available in Yellow, Blue-blocker, Sun
Brown, Golf, Sahara, Rose, Red, Pink,
Lavender, Blue, Sky Blue, Cool Gray, Brown,
Alternative Brown, Gray, Green, G-17, G-15,
PREMIUM Black, Black, and Alternate
PREMIUM Black.
OptiSource Dye
C250-16 Cactus Green
C250-17 Forest Green
C250-22 Pecan
C250-24 Earth Brown
C250-25 Ombre Brown
C250-26 Brunet Brown
C250-29 Autumn Brown
C250-30 Desert Brown
C250-31 No Red Brown
C250-32 Brown
C250-33 Charcoal Brown
C250-34 Sahara Brown
C250-35 Chocolate Brown
C250-38 Olive Brown
C250-39 Russet Brown
C250-40 Pink
C250-41 Hot Pink
C250-42 Soft Pink
C250-43 Rosetone
C250-44 Amber
C250-45 Orange
C250-46 Peach
C250-47 Red
C250-48 Soft Red
C250-49 Fleshtone
C250-50 Blue (cobalt blue)
C250-51 Royal Blue
C250-52 Violet-Blue
C250-53 Blue II
C250-55 Violet
C250-61 Yellow
C250-62 Shooter’s Yellow
C250-70 Green
C250-71 Dark Green
C250-72 Army Green
C250-74 Teal
C250-75 Fern
C250-80 Lavender
C250-82 Heather
C250-83 Rubine
C250-85 Amethyst
C250-90 Red Remover
C250-92 Frosted Cherry
C250-94 Blue Blocker 500
C250-95 Blue Blocker 550
C250-96 Brown-Blue Blocker 550
Contact Phantom for current pricing, trial packs and
color chart.
OptiSource
Opti-Safe® Lens Dyes
Ultra Violet dye (Spectron).
S95800
Phantom
C200-48 Soft Red
C200-49 Fleshtone
C200-50 Blue
C200-51 Royal Blue
C200-52 Violet Blue
C200-53 Blue II
C200-61 Yellow
C200-62 Shooter’s Yellow
C200-70 Green
C200-71 Dark Green
C200-72 Army Green
C200-74 Teal
C200-75 Fern
C200-80 Lavender
C200-82 Heather
C200-83 Rubine
C200-85 Amethyst
C200-92 Frosted Cherry
Custom colors also available.
UV Shield
PSI
PSI’s UV Shield is UV protection that will
become part of the lens. Will not scratch, fade
or deteriorate over time. Permanently impregnates the lens and will not yellow. Blocks 98%
of all harmful UV rays. UV Shield offers 1-minute application with a pot life of 3-4 weeks,
depending on usage.
700 Quart
Super UV Solution
Color Chart, OptiSafe Dye
Sentilles
Phantom
OptiSource is a leader in the OPTICAL tinting
industry, using cutting edge technology to
produce chemically SUPERIOR dyes. The use
of dye stabilizing chemistry produces FAST
absorbing dyes that provide consistent colors
from bottle to bottle and lens to lens.
OptiSource’s top performing dyes are available in 4 oz. concentrated bottles. Our superconcentrated dyes are both non-toxic and
biodegradable. These are same great dye
colors you have grown to love. Available in 46
high fashion colors.
This useful, vibrant color chart itemizes the
most popular OptiSafe dye colors. Post the
chart in your office, lab, or dispensing area for
easy color reference. Lab personnel will enjoy
the chart as a handy reference tool. Chart lists
the popular OptiSafe dye colors, item numbers, and specifications for using the dyes.
Opti-Safe® Lens Dye Packets
Phantom
Poly Dye Plus
OptiSource
OptiSource has solved the age-old problem of
tinting Polycarbonate Lenses using our exclusive dye-stabilizing technology. SPECIAL pH
buffers allow for longer lasting, truer colors.
OptiSource Polycarbonate Dye Plus will also
tint CR-39 lenses at a much faster rate than
our normal dyes. This is the one product for
application on all tintable materials.
Our new Opti-Safe Lens Dye Packets produce
superior tint quality on CR-39 lenses. The
packets offer a shelf life of over one year,
significantly reduced shipping charges, less
shelf space needed, longer life in the vat, better color match on all lens types, and ease of
use—just drop the dissolvable bag into the
dye tank. Ask about our full range of colors,
including our No-Red shades of Black, Brown,
and G15. 4” x 4” envelopes with dissolvable
bags. 0.75 ounces.
C250-01
C250-09
C250-10
C250-11
C250-15
No Red Black
Black
Gray
No Red Gray
G-15
95
Formulated after several years of research
and development, these are the most
advanced lens dyes available today, providing
the most consistent, uniform colors in the
least amount of time. The molecular composition of the dyes allows for rapid penetration
into the lens matrix, bonding to the lens and
providing an excellent resistance to fading.
Plastic CR-39™ (coated and uncoated), hiindex, and polycarbonate lenses can be successfully tinted with Opti-Safe® Lens Dyes.
Choose from a wide variety of colors to tint
virtually every pair of sunglass and prescription lenses to customer satisfaction. The dyes
are available in 3 and 32 fluid ounce concentrate bottles, and are packaged in standard 6
packs. 3 fl. oz.
C200-01
C200-09
C200-10
C200-11
C200-15
C200-16
C200-17
C200-20
C200-24
C200-25
C200-26
C200-29
C200-30
C200-31
C200-32
C200-33
C200-34
C200-35
C200-38
C200-39
C200-40
C200-41
C200-42
C200-43
C200-44
C200-45
C200-46
C200-47
No Red Black
Black
Gray
No Red Gray
G-15
Cactus Green
Forest Green
Burnt Orange
Earth Brown
Ombre Brown
Brunet Brown
Autumn Brown
Desert Brown
No Red Brown
Brown
Charcoal Brown
Sahara Brown
Chocolate Brown
Olive Brown
Russet Brown
Pink
Hot Pink
Soft Pink
Rosetone
Amber
Orange
Peach
Red
Leaves virtually no detectable lens discoloration. Treats lenses in five to 10 minutes, 98%
to 99% blockage. Barrier sealed bottle for
longer shelf life. 8oz. concentrate makes 1
quart.
01-4021
Plastic Lens Dyes
Vigor Optical
A 4oz. (120ml) liquid concentrate makes one
qt. (950ml) of dye solution by adding regular
tap water. Nine clear and true colors, will not
fade. Excellent for gradient lenses. Works on
all brands of lenses with reduced dyeing time.
84.1010
84.1055
84.1075
84.3075
84.4015
84.4025
84.5015
84.5035
84.5055
84.5145
Black, per bottle . . . . . . . . . . . . . . . . . . .
Yellow, per bottle. . . . . . . . . . . . . . . . . . .
Light Brown, per bottle . . . . . . . . . . . . . .
Blue, per bottle . . . . . . . . . . . . . . . . . . . .
Green, per bottle . . . . . . . . . . . . . . . . . . .
Pink, per bottle . . . . . . . . . . . . . . . . . . . .
Neutral Gray, per bottle. . . . . . . . . . . . . .
Green Gray, per bottle. . . . . . . . . . . . . . .
Blue Gray, per bottle . . . . . . . . . . . . . . . .
Dark Brown, per bottle . . . . . . . . . . . . . .
$6.50
$6.50
$6.50
$6.50
$6.50
$6.50
$6.50
$6.50
$6.50
$6.50
10/12/11 11:11 AM
LENS DYEING
96
Small Powder-Free Nitrile Gloves
Dyeing Supplies
6038 Biodegradable “3 in 1”
Gloves, Aprons
Hand Cleaners
OptiSource
Disposable Safety Gloves™
Dye Be Gone
BPI
BPI
Neutralizer
Western Optical
Nitrile gloves offer better tactile sensitivity,
comfort, dexterity and puncture resistance
than both rubber and vinyl. These powder-free
gloves are made stronger through a manufacFor economical protection in the lab. Shields turing process called fusion bonding. Fusion
hands from dyes and chemicals. Gloves are bonding integrates synthetic polymers into
sheer, made of seamless stretch vinyl and the material to create a multi-layered glove for
Quickly strips color without damaging polyenhanced protection.
lightly lined with powder.
99-NGS
carbonate, hi-index or CR-39 lenses. Safe for
Packs of 25.
the dispenser, the environment and the lens. 82901 Small
Vinyl Gloves
This product is approved for disposal through 82902 Medium
water treatment facilities.
6038 Quart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12.25
6039 Gallon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $42.00
6040 4 Gallons. . . . . . . . . . . . . . . . . . . . . . . . . . $150.00
71003
Jimmy Dye Cleaner
Phantom
82903 Large
The fast way to remove dye from your hands.
Rinse away those persistent dye stains with
this new hand cleanser. This product has been
specially formulated for lab personnel.
OptiSource
Large Powder-Free Latex Gloves
OptiSource
6042 Biodegradable CR-39
Neutralizer
Western Optical
Seamless, high-quality disposable/reusable
vinyl gloves. 5 mil thickness. Strong, yet thin
enough for keen sense of touch. Strongly
recommended for optical laboratory use.
Non-sterile, natural rubber, large latex exam Lightly pre-powdered. Easy to put on and take
gloves are powder-free. They contain a tex- off without tearing. Chemical resistant.
tured wet-grip surface with a beaded cuff. The Packaged in a box of 100 gloves.
A130 Small. . . . . . . . . . . . . . . . . . . . . . . . . . . $12.95 ea.
latex exam gloves are cream colored.
A131 Medium. . . . . . . . . . . . . . . . . . . . . . . . . $12.95 ea.
99-LGL
Specially formulated to rapidly remove color
from CR-39 plastic lenses. This pre-mixed and
ready to use chemical has superior safety
Large Powder-Free Nitrile Gloves
OptiSource
A131
A132
A132
A133
Medium. . . . . . . . . . . . . . . . . . . . . . . . .
Large. . . . . . . . . . . . . . . . . . . . . . . . . . .
Large. . . . . . . . . . . . . . . . . . . . . . . . . . .
X-Large. . . . . . . . . . . . . . . . . . . . . . . . .
$12.95
$12.95
$12.95
$12.95
ea.
ea.
ea.
ea.
Jimmy Dye Cleaner / Remover will become
your BEST friend in the lab. This micro grit
cream is just the answer you’ve been looking
for to clean and dye, grease, dirt, and grime
from your hands, pans, clothes and more.
Jimmy Dye Cleaner / Remover is biodegradable and safe on most materials.
99-J
PSI
Gloves
PSI
standards combined with low evaporation and
minimal odor. Operator safe, and environmentally responsible, this neutralizer has been
approved for disposal through water treatment facilities.
6042 Quart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12.25
6044 Gallon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $42.00
6045 Four Gallon Pack . . . . . . . . . . . . . . . . . . . $150.00
6046 Biodegradable Heat Transfer
Fluid
Western Optical
Nitrile gloves offer better tactile sensitivity,
comfort, dexterity and puncture resistance
than both rubber and vinyl. These powder-free
gloves are made stronger through a manufacturing process called fusion bonding. Fusion
bonding integrates synthetic polymers into
the material to create a multi-layered glove for
enhanced protection.
99-NGL
Small Powder-Free Latex Gloves
OptiSource
Nitrile Blue Gloves are highly elastic offering a
secure fit. Their superior strength extends
their wear. They are ergonomically designed
to provide the fit, comfort and durability of
natural latex without the protein allergens.
Textured for better gripping. Powder-free to
eliminate contamination. 6mil., small, medium,
large & x-large. 100/box, 10 boxes/case.
Available by the box or case. Latex gloves
also available.
Latex Gloves
Vigor Optical
Get rid of stubborn dye stains with Quick
Clear Hand Cleaner from PSI. Easily remove
stains by applying to skin and rubbing until
210 8 oz. bottle
Lens Holders
12-Pair Spring Rack
BPI
Use full strength to retain and evenly distribute heat to dye chambers for faster, more
controlled results. Non-flammable, non-toxic,
non-flammable, non-toxic, non-corrosive and
will not conduct electricity. Operator safe and
environmentally responsible, this product is
approved for disposal through waste treat- Non-sterile, natural rubber, large latex exam
gloves are powder-free. They contain a tex- Disposable latex gloves. Available in two Our spring-loaded rack is perfectly suited for
ment facilities.
tured wet-grip surface with a beaded cuff. The sizes: medium (2lb) and large (2lb 5oz.). Box of cleaning or dyeing multiple pairs of lenses in
6046 Quart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12.25
latex exam gloves are cream colored.
large volume production machines.
100 gloves.
6048 Gallon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $42.00
6049 Four Gallon Pack . . . . . . . . . . . . . . . . . . . $150.00
99-LGS
17.106 Medium . . . . . . . . . . . . . . . . . . . . . . . . . . $13.00
17.107 Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . $13.00
66900
10/12/11 11:11 AM
LENS DYEING
Production Lens Holders
Lens Holders
BPI
4-Pair Lens Rack
them apart from lens holders being used for
regular tinting operations. Reduce the possibility of dye contamination when using ultraviolet filtering dyes.
97
Lens Holder, Stainless Steel V1-R1
Phantom
8300
BPI
Black Lens Holder
OptiSource
Specifically designed for use with the
Production Dye System™. Adjustable. Adapts
to most large tank systems.
For doing solid tints or long treating process- 15500 72-lens model
15600 42-lens model
es such as ultraviolet treatments. Ideal for Contact BPI for current pricing.
tinting multiple pairs of different size lenses.
Slant Lens Holder II™
Fits in quart tank.
66100
BPI
BPI Bouncer
BPI
OptiSource’s Lens Holders end the confusion
and frustration of contaminating valuable lab
chemicals. They are compatible with gradient
systems and hold lenses with a spring-loaded
grip. With the ability to treat two lenses at
once, our Lens Holders come in black or white
high-impact Delrin plastic! Use this black
Lens Holder for all of your dye colors.
*Available white Lens Holder for UV and neutralizer solutions. dye colors.
99-LH
Model V1-R1 will hold one pair of lenses and
is made of quality stainless steel, for tinting,
bleaching, and UV treatment. It is designed
with an adjustable spring-loaded lock so that
the lenses are safely and gently held between
the V-shaped jaws of the retainers, preventing
the lenses from slipping or rotating while
being tinted. The lock and sliding retainer can
be aligned in a non-horizontal position to
secure lenses of slightly different sizes, thicknesses, and shapes.
T322
T455 Model V1–no spring-loaded lock. Suitable for UV
treatment or bleaching.
Lens Holder, Stainless Steel V1-RS
Phantom
White Lens Holder
OptiSource
For tinting pilot lenses or other asymmetrical
shapes. The angle of the lens on the lens
surface keeps the dye solution at different
For Gradient tinting. Spring action for perfect levels, which results in a more subtle fade.
shading available in slant or straight configu- Please specify either hand-held or standard
ration, holds two lenses.
gradient models when ordering. 7-1/2”h x
9601 straight
2-1/2”w.
9604 slant
9700
Dual Lens Holder II™
Three-Point Lens Holder II™
BPI
BPI
Model V1-RS has a split retainer that makes it
capable of holding two lenses of slightly difOptiSource’s Lens Holders end the confusion ferent sizes and shapes. This model is strongand frustration of contaminating valuable lab ly recommended for tinting with a gradient
chemicals. They are compatible with gradient machine.
T324
systems and hold lenses with a spring-loaded Contact Phantom for current pricing.
grip. With the ability to treat two lenses at
Lens Holder, White Teflon
once, our Lens Holders come in black or white
high-impact Delrin plastic! Use this White
Phantom
Lens Holder for all of your UV and neutralizer
solutions. *Available Black Lens Holder for all
of your dye colors.
99-LHW
Holds two pair of different sized lenses to help
speed up multi-job lens coloring. Fits easily Designed to hold the lens in three places
Lens Holder, Plastic
instead of four. There’s a single holder on top
into any quart-sized tank.
Phantom
instead of the usual two. For lenses that are of
9500
an unusual shape.
Lens Display Rings
BPI
9603
Triple Pair Lens Holder II
Same features as the stainless steel lens
holder, Model V1-R1, except with White Teflon
construction. Ideal to distinguish between
lens holder designed for UV treatment and
lens tinting.
BPI
T228 model V1
T229 model V2
Same features as the stainless steel lens T330 model V1-R1
holder, Model V1-R1, except with plastic con- T331 model V2-R1
struction.
Lens Holders
T338 model V1
T339 model V2
Lightweight rings hold 71mm lenses for disT340 model V1-R1
T341 model V2-R1
play or protective storing. Eliminates drilling
Holds
three
pair
of
same-sized
lenses.
Fits
lenses. Pkg. of 25.
easily in quart tanks. Specify hand-held or
82001
Lens Holder, Plastic T110
standard gradient models. 7”h x 5-1/8”w.
Lens Holder II
BPI
PSI
Phantom
11901
UV Lens Holder II™
BPI
For one or two pair of lenses. Constructed of
stainless steel and Teflon for long life. Lenses
are held in place by an adjustable clamp that
is light enough to grip firmly without marring
the lens. The nylon handle dissipates heat and
Economical plastic lens holder securely holds is equipped with a hanger slot for use with
2 lenses in place for lens tinting, UV treatment, gradient devices.
or color neutralizing.
100-1 Single pair holders, ea.
Holds two lenses.
9600
T110
White UV lens holders make it easy to keep Contact Phantom for current pricing.
100-2 Double pair holders, ea.
10/12/11 11:11 AM
98
LENS DYEING
Jacob’s Ladder
Lens Holders
Western Optical
# 62907
Lens Holders
BPI® PH-013M Multifunction Lab
Meter
Vigor Optical
BPI
fast, accurate readings of surface temperatures, liquids and gases; shock resistant,
powered by an easily replaced 9-volt battery;
built in rear stand for angled viewing; includes
storage case and instructions for use. 0°F to
300°F range.
ST-66 TM-99A Digital Thermometer
ST-67 Heavy Duty Digital
Thermometer
Optical Machinery
Stepped clear acrylic riser for 10 lenses.
To hold lenses while tinting or coating. 3
Lenses are offset to show each one individuounces shipping weight.
84.405 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . $33.00 ally. 3-5/8”w x 9-1/2”h x 9-3/4”d.
84.406 White . . . . . . . . . . . . . . . . . . . . . . . . . . . . $33.00
Lenses not included.
10030 Wall Mounted Tinted Lens
Display
10037 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $50.00
Western Optical
Western Optical
Table Top Tint Tray
Multi function lab meter monitor pH temperature and oxidation/reduction potential. pH
checks tint solutions for dangerous shifts that
could attack coatings on lenses. Temperature
checks tinting solution for optimum setting.
ORP checks water quality used for preparing
the tint solutions.
# 62909
BPI® PH-900-III pH Meter
BPI
Display 17 lenses on a white background.
Convenient size fits everywhere and displays
Measures 16”w x 14 _”h. Lenses not includ- 15 easy to remove lens samples. Polished
clear acrylic. 12”w x 2”h x 6-1/2”d. Lenses
ed.
10030 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $50.00 not included.
10032 Eyefull Tower Rotating Tinted
Lens Display
Heavy duty digital thermometer measures 0 to
2000°F; excellent for temperature checking of
all your lab fluids including glass chem-treat
units; removable boot for added protection;
includes 2 type K probes, long immersion
probe and multi-purpose strap; dual input
displays temperature data; easy calibration;
hold function; gives difference between dual
readings; instructions included.
ST-67 Heavy Duty Digital Thermometer
10044 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $22.00
U.V. Measuring Devices
Thermometers
Western Optical
BPI® BT-01 Digital Thermometer
BPI
Monitor pH of the tinting tank to be sure that
solutions do not become too basic and attack
coated lenses.
# 62908
Lab Thermometer
BPI Transchromatic Spectrometer
III™
BPI
BPI
Displays 32 lenses in only 8” of counter space.
Rotating tower measures 15”h x 8” diameter.
Lenses not included.
10032 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $88.00
10039 Lens Ladder
Western Optical
Lab thermometer for your tinting operation.
Usable up to 300° C.
# 62905
BPI® DT-260 Infrared Thermometer
BPI
59800 Glass 0-300°F
62900 Stainless Steel Dial Thermometer 0-220°F
Dial Thermometer
Coburn
Measure UV and visible light transmission in
photochromic and all other types of lenses.
The BPI Transchromatic Spectrometer™ measures UV and visible light absorption of a
photochromic lens as it darkens.
BPI#119513 115V
BPI#219512 220V
BPI® Luminous & UV Transmittance
(Tv) Photometer™
BPI
Clear acrylic steps for 8 lenses in a compact
area. 1-7/8”w x 7-3/4”h x 7-1/4”d. Lenses not
included.
10039 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $28.00
6055 Dual Lens Clamp
Western Optical
Infrared lab thermometer usable to +260° C,
can be used to check tinting operation with- For surface blockers. Easily reads 0 to 180°F
dial. Aids in adjusting and maintaining correct
out being tinted.
# 62906
temperature to avoid warping plastic lenses
from overheating.
BPI® DT-530 Infrared Thermometer
BPI
8018600
ST-66 TM-99A Digital Thermometer
Optical Machinery
Stainless steel and high temperature delrin
are combined for ease of use and long life.
Spring loaded to simplify insertion and removal of lenses. 7” Long.
6055 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.00
UV Lens Clamp
6056 White . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.00
# 119517 110v
Checks high temperature devices safely.
# 219519 220v
Monitor chemical tempering process without
disturbing the hot salts. Usable up to 530° C. Economical solid state thermometer gives Contact BPI for current pricing.
It is an invaluable aid for quality control of
lenses that have received UV light absorption
treatment. The instrument also measures visible luminous transmittance, the internationally accepted measure of visible light transmittance. This value may be used for fashion
tint density control as well as critical adjustments on therapeutic tints such as BPI® Filter
VisionTM 540 and BPI® Filter VisionTM 500.
10/12/11 11:12 AM
Subscribe to our
digital edition!
LabTalk, the magazine that
provides real solutions to the
everyday challenges of running
an optical laboratory, is available
in a convenient digital edition!
It reads like print, but includes
live web links for instant retrieval
of more information.
You can flip through the
pages, zoom in to read articles
and even print them to show
your colleagues.
Visit www.labtalkonline.com
to read the digital edition of LabTalk.
Plus sign up to receive the next edition
in your email inbox as soon as it’s posted!
100
LENS DYEING
U.V. Measuring Devices
BPI-109506 Economy UV Tester
Photometers
Optical Machinery
PSI
BPI® Mini Meter™
BPI
Reads UV light transmission from 320nm to PSI distributes the full line of BPI photome400nm; new chassis design allows lenses in ters. All are easy to use and offer a wide range
of functions. PSI offers all seven BPI photomframes to be tested.
eters at manufacturer’s pricing.
The world’s smallest UV and visible photometer. It is a battery powered hand-held unit
that can easily be moved from room to room.
Calibrate to 100 and press the let button for
visible and the right for UV transmission. The
unit can compensate for lens power and
thickness. It can also be calibrated for 380nm
readings.
UV Transmission Meter Model
Spectrum 400UDX
UV Meter
Santinelli
Phantom
19503
BPI® RGB Spectrometer
BPI
Measures the transmission percentage of
ultraviolet radiation (320nm to 400nm). Offers
liquid crystal display and a sensitivity switch
that allows the use of the ultraviolet source for
a longer period of time. Two-year warranty.
5.98”h x 9-3/4”w x 6.557”d, 10lb (4.5kg).
E413 120V, 60Hz
E413-230 230V, 50Hz
The BPI RGB Spectrometer (BPI# 19504) is an
invaluable aid for matching the colors of tinted
lenses or filters. It may also be used to check
CIE (L*,a*,b*) color coordinates.
UV Transmission Meter Model
Spectrum 400Z
Phantom
Complete with automatic push-button calibration, the Santinelli UV Meter can accommodate all sizes of lenses; mounted or unmounted. This UV Meter features a Display Hold
which continues to show readout after the
lens is removed. The Santinelli UV Meter measures transmittance/absorption of hazardous
UV light and visible light and also demonstrates darkening of photochromic lenses.
Includes separate switches for power, UV and
visible light. 115V, 50-60 Hz.
Spectrum Scan 2-Dual Light Meter
Sentilles
# 19504
UV Economy Photometer™III
BPI
A state-of-the-art transmission meter for measuring ultraviolet light (320nm-400nm).
Sensitivity switch allows the use of ultraviolet
light source for a longer period of time. Twoyear warranty. ETL approval. Size: 6.4”h x
Reads UV light transmission percentages 6.6”w x 6.7”d. 6lb. (2.7kg).
from 320nm to 400nm. New chassis design Contact Phantom for current pricing.
means that lenses can now remain in the UV/Visible Light Transmission Meter,
frames during testing. 6-1/4” x 6-1/4” x 6”.
109514 115V
209514 220V
Easy-to-use digital unit measures either ultraviolet or visible light transmission. Auto calibration and display hold features for easy
operation. Reads lens in or out of frame.
296-0
Model Spectrum 700VU
Phantom
UV Safety Analyzer™ III
BPI
Allows patients to see for themselves how
effectively their own lenses will filter UV light.
Glasses are placed in the receptacle area and
different lights signal the degree of safety in
its protective abilities. Ideal for the waiting
room or dispensing area. 6”h x 7”w x 7-1/4”l.
6lb (3kg).
109513 115V
209513 220V
An ultraviolet radiation and visible light meter
which measures the average percentage of
ultraviolet rays and visible light transmitted
through an optical lens. Designed to verify the
ultraviolet and visible light protection level
accurately and consistently. Capability
extends over the ultraviolet spectrum 320nm400nm, and over the visible spectrum from
400nm- 700nm. Light transmission through
lenses can be checked without removing the
lenses from the frame. The meter is also useful in demonstrating photochromic lenses.
ETL approval. 6.7”h x 6.6”w x 6.4”d, 6lbs.
10/12/11 11:12 AM
Calipers
101
Gauges
Coburn Sagitta Gauges
AS128 Sphereometer
Vigor Optical
Coburn
Optek
Lens Calipers
Offers digital precision combined with close
hardware tolerances to produce unprecedented accuracy in ophthalmic lenses or lap tool
curve measurements. Gauges provide electronic digital readings of convex and concave
Nylon tip gauge has specially deep throat to
take large lenses. Nylon jaws prevent marring surfaces measured in thousands of millimelens. Graduated in 1/5mm. Index point zeroed ters. Model 50C (50mm cylinder) has a range
of -15.750 to +16.750 diopters at zero pad
by set screw.
35.024. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $47.75 compensation. The range can be extended by The
ACCUcomp
AS128
ACCUcomp
Sphereometer features advanced transducer
using a DigiSag model.
Gauges
technology and precision microprocessor
DigiSag model:
Vigor Optical
control. The AS128 gauges both plus and
80073-00 Test Block
minus curves and is extremely simple to oper82980-00
50C
–
115V
(Cylinder)
Wide Throat –Precision instrument with a
ate.
82982-00 40C – 115V (Cylinder)
25mm opening. Scale is graduated in 1/5mm
82984-00 50C – 115V (Sphere)
or 1/10mm increments.
Key Features: Powerful microprocessor
Replacement Parts/Accessories:
Sadler #525
instantly calculates and displays curve infor81359-00 (7-1/4”)
82677-02 40mm bar assembly
mation (50mm & 35mm Ball Point Head) to
Sadler #8
82704-00 50mm bell assembly w/colle
True sag value displayed to 0.001 mm, True
81351-00 (extra large lenses)
Wide throat lens caliper has nylon ball tips Contact Coburn for current pricing.
diopter value displayed to 0.001 diopter, and
which will not scratch lens. The balance point
Coburn SagMate™ Digital Sagometer Radius of curvature displayed to 0.001 mm OM-DC Digital Caliper
is centered on cushioned grips. This tool
User programmable indices of refraction allow
accommodates lens blanks of over 90mm
Coburn
Optical Machinery
extreme versatility - High contrast multi line
diameter and 22mm in thickness. 1/10mm
LCD display - Sealed membrane keypad Vernier mm gauge is included for accurate A digital sagometer that measures both con- Included calibration standards allow quick
measurement. Overall length: 9-3/4”. Throat vex and concave spherical lens surfaces. and precise calibration - Heavy duty alumidepth: 47mm.
num and steel construction provides rugged
35.035. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $69.00 Features RS232 interface that permits transmission of its sagitta readings to Coburn’s durability and an extremely stable platform Reduced Price!
Comes standard with a 50mm Ball Point Head
RXP™ III Prescription Processor, or any com2060 Lens Thickness Gauge
Ass’y
puter with a RS232 interface which is proWestern Optical
grammed to accept and make use of the Specifications
Coburn
sagitta information. It has a sagitta range of
–15mm (–17.65D) to +15mm (+18.71D).
Diopters computed using a tool index of
1.530. A specially designed plus or minus bell
has a 50mm diameter for measuring convex
surfaces and a 52mm diameter for concave
surfaces.
SS Construction, accurate to 1/1000th of an
inch; convenient reset button and lock-down
screw; easily replaced watch style battery.
ST-5057 Lens Caliper
Optical Machinery
Constructed of corrosion resistant brass and
stainless steel. Has extra deep and extra wide
jaws for use on lenses up to 86mm in diameter. Scale is in 1/10th millimeter increments.
Soft spring and Delrin tipped jaws are
designed to protect soft lens material. Overall
length 7-3/8”.
2060 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $49.00
2060WM Wide Mouth Lens Caliper
Western Optical
Deep throat design for measuring thickness of
large lenses; replaceable tips protect lenses
from scratches or marring; calibrated in
0.20mm increments; measures to 19mm;
stainless construction with brass index plate.
10421-00 Power supply/adapter, 120VAC AC to 6VDC
82704-00 50mm Bell Assembly with Collet
82980-00 Digital Sagmeter (50C)
85400-00 Coburn SagMate Digital Sagitta Gauge
85401-00 Digital Gauge Only
85404-00 Replacement Bell
Weight: 10 lbs
Power: Transformer
50/60Hz, 1~ to 24V
-
120V-240V,
0.1A,
3-Point Sagitta Gauges
Optical Machinery
Lens Clock
Coburn
Determines front base curve of lens. Easy
Precision gauge calibrated to ±15.00D. bifocal clearance. No-wear Carbide ball tips
Furnished with point shield and unbreakable digital or mechanical, hand-held or on stand.
50mm, 40mm, 35mm or 20mm.
crystal. 8136800 with jewel bearing.
Size: 6.2”W • 10.75” D • 8.12” H
Sadler Lens Measure
Digital Lap Gauge
DAC Vision
Optical Machinery
Calipers
OWC
Measures up to 25mm thick lenses in 1/5mm
graduations. Easy to calibrate. Precision constructed of stainless steel and brass. 7-1/2”
long.
2060WM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $55.00
Curve Gauges
Wide mouth calipers with plastic tips. Will
accommodate lenses up to 25mm thickness.
AO Radiuscope
Belrose
Digital Caliper
Get the same accurate reading every time at
180° and 90° on convex cylinder laps with the
Measures plano to +17D or –17D with abso- Digital Precision Lap Gauge. 50mm reads 0-14
lute accuracy. Plus and minus readings print- diopters and 35mm reads 0-20 diopters.
ed in different colors. For glass and plastic.
ST-2070
Ball Tip Measure
Vigor Optical
Digital Sagitta Sphereometer
Optical Machinery
Dynamic Labs, Inc.
Precision electronic digital caliper measures
both inside and outside, in millimeters and
inches. Measures 0-150mm, accurate to
0.01mm, with instant LCD display. Includes
zero set feature, depth blade, thumb roller,
protective carry case, and battery. Ship wt.
1lb.
35.180. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $62.00
Reduced Price!
A necessity for the accurate measurement of
the concave and convex base curves of contact lenses. Monocular model with internal
reading and fine and coarse adjustments.
Completely refurbished to ensure long life
operation. Specs: 17-1/4”h x 6”w x 13”d,
A great, easy to use lens clock at a great
115V/60Hz. Weight: 10lbs.
price! . . . . . . . . . . . . $69.95 bulk pricing available
101-108_SF1110_LensInspection.indd 101
Designed to determine front base curve of any
uncut lens. Digital indicator allows error-free
readout. Standard unit is 50mm brass bell.
Custom bells quoted on request.
10/12/11 12:07 PM
102
uncut lens. 50mm brass bowl is accurate to
0.01mm.
Curve Gauges
WST-49D
OM-80084 Diopter Gauge
Optical Machinery
18mm Ruby Tip Hand Held Sagitta
Gauge
Precision Tool
Direct diopter gauge reads in 1/8 diopter
increments. Plus and minus. No need for conversion charts. Oversized for ease of handling Four 2mm Zeiss polished Ruby contact points
provide scratch-free toric gauging on lens.
and reading. 50mm bar.
±30 diopter gauging range. All component
parts precision machined of stainless steel.
Precision Lap Gauges
Gauge body made of anodized aircraft alumiOptical Machinery
num. This is an extremely accurate small toric
sagitta gauge, ideal for any finished lens surface curve inspection.
25mm CCV/CVX Hand Held Gauge
Calibration Standards
Table-Top Sagitta Gauge
Precision Tool
Precision Tool
Machined to Essilor glass master standards.
Provide known accuracy for the entire lab.
CNC turned on a stainless steel lap tool style
base. ±0.002mm accuracy @40mm sag., guaranteed. Easily truable for $39.95. Available in
plano, 10.00D, 6.00D, & 3.00D in both concave
and convex. Order sets for additional discounts. Custom carrying cases available.
Accurate gauging and equipment is of no This is the same reliable gauge that we use
daily in our own facility. This gauge has two
value without proper calibration.
linear bearings that slide on posts bringing the
indicator tip straight down to the center of the
Custom & Stock Gauges
tool. The tool clamp, directly under the indicator, is designed to lock at 90-degree increPrecision Tool
ments giving you accurate base and cross
curve measurements. Two contact points on
the gauging surface ensure proper alignment
of the indicator tip. This gauge has a +15
diopter to -10 diopter gauge range and is
accurate to ±0.002mm. Available with manual
Mitutoyo dial or Mitutoyo digital IDU indicator.
Optional blocked lens adapter can be purchased. 6” x 13” x 14”. 12lbs. Battery operated.
Precision Tool
No more guesswork. Get the same accurate
reading quickly every time at 180° and 90° on
your convex cylinder laps. Built for years of
service. Conversion chart included. 50mm
reads 0-14 diopters; 35mm reads 0-20 digital
or mechanical on stand of hand-held diopters.
Precision Sagitta Sphereometer
Optical Machinery
Highly accurate 25mm gauge which will measure both concave and convex curves up to
30 diopter! The gauge body is manufactured
from quality aircraft-grade aluminum. A
.001mm Mitutoyo indicator comes standard.
2-1/2” x 2-1/2” x 6”. 1lb. Battery operated.
40mm Combination CCV/CVX Hand
Held Sagitta Gauge
Precision Tool
Reference chart gives measurements within
0.01 diopter. Large, easy-to-read dial. 50mm
brass bell. Conversion chart included. Custom
bells quoted on request. Digital or mechanical
on stand or hand-held.
WLLG Lens and Lap Gauge
OWC
If a lab were to have only 1 gauge, this would
be it. The 40mm chord gives fast, accurate
readings on both concave, convex, sphere
and toric surfaces and works equally well on
both tools and lenses. The gauge body is
made out of quality anodized aircraft aluminum. Four contact points on the gauging surface ensure consistently proper alignment.
This gauge is available with manual Mitutoyo
Digital Sag Gauge for laps and lens. Checks dial or Mitutoyo digital IDU indicator. Ideal for
up to 16.00 diopter. Comes with zero standard precisely checking concave and convex laps.
and charts. 2.5”w (6.4cm) x 1”d (2.5cm) x 8”l 3” x 3” x 7”. 1lb. Battery operated.
(20.3cm), 3lb (1.4kg). WLLG.
WST-49D Sagitta Gauge
50mm Combination CCV/CVX Hand
Held Sagitta Gauge
OWC
Precision Tool
Larger chord width provides finer resolution.
All component parts precision machined
stainless steel. Gauge body made of anodized
aircraft aluminum. Four contact points on the
gauging surface ensure consistently proper
alignment. Gauge tips made of 5/32 chromeplated balls. Available with manual Mititoyo
dial or Mititoyo digital IDU indicator. 14.00D
convex, 12.50D concave range. Ideal for precisely checking both concave and convex
A digital readout state-of-the-art lab tool laps.
designed to determine the front curve of any Contact Precision Tool for current pricing.
Satisloh Torometer
Provides the accuracy required for measureSatisloh
ment of segmented spherical and torus
curves. To ensure accuracy 2mm Zeiss polished, ruby tip contact points or precision
ground, chrome plated 5/32” balls provide
scratch free toric gauging. Four contact
points on the gauging surface ensure proper
axial alignment each and every time. All
spherical gauges are machined “inline on
center” to eliminate run-out and ensure accuracy. All Precision Tool Technologies gauges
For various indices, sagittal tables are availare equipped with Mittiyo 0.01 or 0.001 resolu- able in steps of 1/1000 D to specific indices
tion indicators.
such as 1.498, 1.530 and 1.701; others availContact Precision Tool for current pricing.
able upon request. The complete set allows
measuring CC&CX toric and spheric lens surHand Held Carbide Tip Sagitta
faces. All gauges are supplied in an attractive
and sturdy aluminum case.
Gauges
Precision Tool
Ball Tip Lens Measure for Plastic and
Glass
Absolute accuracy, the most accurate sagitta
Vigor Optical
gauges made. Accuracy guaranteed to
±0.003mm. All component parts precision
machined stainless steel. Gauge body made
of anodized aircraft aluminum. Four contact
points on the gauging surface ensure consistently proper alignment. Gauge tips made of
solid carbide ground to a tolerance of
0.00005”. 34mm or 40mm, concave or convex.
Available with manual Mititoyo dial or Mititoyo
digital IDU indicator. Ideal for checking generDesigned for accurate measurement on plasated lenses.
tic and glass lenses, this Grobet-Vigor® Lens
Measure gives perfect plus or minus curve
Precision Brass Sphere Bell Gauges measurements in quarter diopters on front or
back of any lens. This rugged clock is a must
Precision Tool
for every dispenser. 4oz.
35.216. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $287.00
Reduced Price!
Ball Tipped Lens Clock
Western Optical
Completely CNC turned brass to provide
exacting accuracy. Available in 8mm, 20mm,
35mm, 40mm, and 50mm. Custom bell diameters made upon request. A comparatively
inexpensive, highly accurate way to check
front lens curves. 8mm, 20mm, 35mm, 40mm,
50mm bells w/o indicator; Mititoyo analog
0.01mm dial indicator; Mititoyo IDS 0.01mm
dial indicator; Mititoyo IDC 0.001mm dial indicator; Gauge stand.
A great buy! Provides precise curvature measurements on glass and plastic lenses.
Rounded metal tips prevent lenses from
scratching. +\-20 diopters. Adjustable calibration.
2068BT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $77.00
10/12/11 12:07 PM
Curve Gauges
Inspection Light
Gem Tipped Lens Clock
Western Optical
103
Spectrum Scan II
Belrose Lensmeter
Sentilles
Belrose
Digitally measures ultraviolet or visible light
transmission of lens mounted or unmounted.
Auto calibration and display hold features for
ease of operation. 296-0.
High quality lensmeter that you could be used
in both laboratory or office settings. Has
American cross lined target, prism compensator with ink marking device. The oversized
lens table permits the measurements of lenses from 30 to 90 mm indiameter. The external
power wheel has a range from 0 to 20 dioptors
in plus and 0 to 19 dioptors in mini. This
deluxe unit features a full 90 degress inclination enabling the measurement of contact
lenses when used in the vertical position. Axis
from 0 to 180 degress in 1 degree increments. . . . . . . . . . . . . . . . . . . . . . . . . . . $995.00
(Tv) Photometer™
BPI
Provides precise curvature measurements on
glass and plastic lenses. Ball tipped with rolling sapphires to prevent lenses from scratching. +/- 20 diopters. Adjustable calibration.
Invest in quality and save with Western’s
afforable pricing.
2068 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $90.00
Diameter Gauges
Digi-Sizer II
Precision Tool
It is an invaluable aid for quality control of Contact Sentilles for current pricing.
treatment. The instrument also measures vis- Lens Analyzers
ible luminous transmittance, the internationally accepted measure of visible light transB&L Model 70 Vertometer
mittance. This value may be used for fashion
tint density control as well as critical adjustBelrose
ments on therapeutic tints such as BPI® Filter
# 119517 110v
# 219519 220v
BPI Polariscope
BPI
BPI
Highly durable and highly accurate, +/-.1mm,
this digital circumference lens gage will measure your blocked lenses or lens-only. Also
use it to set up or calibrate your edgers.
Digital display reads accurately to 1/10th of a
millimeter. Automatic low-pressure tension
assures exact readings for everyone. Includes
automatic calibration button for exact readings every day, every hour, and every minute.
The Digi-Sizer II is the last word in lens circumference quality control. 3” x 6-1/2” x
12-1/2”. 12lbs. 110V.
The Aquasizer
PSI
The world’s most trusted Vertometer!
American lined target with external reading,
precise ink marking device, durable adjustable lens stage, stainless steel efficient lens
holder. The large power drum on the right side
allows easy critical control of the power setThe BPI RGB Spectrometer (BPI# 19504) is an ting to ±20 diopters. The cylinder axis drum on
invaluable aid for matching the colors of tinted the left is marked 0° to 180° and facilitates
lenses or filters. It may also be used to check locating the lens axis. With the eyepiece retiCIE (L*,a*,b*) color coordinates.
cle lens, prism power can be measured direct# 19504
ly from 0.25 to 5.00, and to locate prism baseContact BPI for current pricing.
L-PAL ID Progressive Lens Identifier apex line. This instrument is used for offices
or labs worldwide, and considered by many
Optical Machinery
the best ever. These B&L Vertometers are
completely refurbished by Belrose Refracting
Equipment Company to ensure long life operation. Specs: 16”h x 7”w x 21”d. 115V. Weight:
29lbs.
A hand-held device that can be used for
checking the stresses imposed on lenses by
the frame.
16204
BPI Spectrometer
BPI
Belrose Auto Lensmeter
Belrose
Clearly identifies progressive lens markings,
manufacturer position reference points on
ALL materials; allows identity of markings to
Used to measure circumference of an edged be re-inked after surface clean-up or to
lens. Clear and accurate. Lenses may be mea- remark at final inspection. Excellent for checking for manufacturer surface defects prior to
sured with or without a block affixed. 10”.
422
processing and for in house quality checks
422T Tapes only
after hard coating.
C-Sizer
Satisloh XENON Arc Lamp
Vigor Optical
Satisloh
The first to be specifically designed to meet
the needs of the ophthalmic lens processing
industry, the Satisloh XENON Arc Lamp is an
essential quality control device. This lamp
provides easy evaluation of the quality of a
polished lens surface and detects any defects
in hard coated lenses. This eliminates inferior
lenses from continuing through the manufacturing system only to be rejected as a result of
power aberrations, waves, and tinting defects.
The Aquasizer is a circumference sizer useful The Satisloh XENON Arc Lamp also locates
for both regular and blocked lenses. Tape is the hidden marks in many progressive lenses.
easy-to-read, White plastic with 130-190mm As the most powerful lamp on the market
today, theSatisloh XENON Arc Lamp will dracalibrations.
35.820. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $90.00 matically improve quality control efforts. 12” x
35.821/1 Replacement tape . . . . . . . . . . . . . . . . . $4.00 12” x 17”. 20lb. 115V, 3.1A.
Reduced Price!
This completely new instrument is the first
spectrometer that is priced to be available to
any lab that requires a complete spectral
analysis. The BPI Spectrometer will be available for thousands of dollars less than other
comparable products that are currently on the
market. The BPI Spectrometer covers wavelengths from 350nm to 710nm with a resolution of better than 10nm. The transmittance
spectrum results may be used for quality
control purposes, such as comparing tinted
lenses as well as providing information about
what tints needed to be added to match the
color of another lens or a customer-supplied
sample spectrum.The BPI Spectrometer is a
free-standing unit that attaches to a PC with a
serial cable via the computer’s RS232 port.
The supplied software requires Microsoft™
Windows™. The test results can be saved to
an integrated database for future reference
and also can be printed out to any compatible
printer.
Sample to use for even inexperienced operators. Measures all type of lenses including
single vision, bifocals, progressives, uncts
and contact lenses. Icons conveniently located on this full colored graphic LCD screen
corresponding to the operating buttons!
Measuring range to 20 dioptors in the optional
steps to include 0.10D, 0.12D and 0.25D.
Cylinder range from 0 to 10 axis 0 to 180 in
one degree steps. Add measurements from 0
to 10 dioptors. In corporated nose slider measures PD of spectacles. This high quality
instrument also measures ABBE and UV values. Special nosepiece included for precise
measurement of contact lensesthis unit also
includes an incorporated printer, 2 rolls of 19501 115V
extra paper, 2 space fuses, power cord, dust 219501 220V
cover and instruction manual. . . . . . . $1895.00 Contact BPI for current pricing.
10/12/11 12:07 PM
104
Lens Analyzers
Refurbished Vertometers
Lens Diagnostic Arc Lamp
Visionix VL 1000
Optical Machinery
PSI
Visionix
BPI® ID Tech™
BPI
OMI regularly receives pre-owned and has
refurbished lensometers available most times;
lensometers featured in the picture are a
Model 70 B&L and a clone Model 70 by
For Lens Inspection and Progressive Lens Reichert; disassembled, cleaned, checked for
Mark Identification System. It is small, light out of tolerance wear, parts replaced as necessary, repainted, re-assembled and calibratweight and uses very little electrical power.
ed; please check with us for availability and
# 18301 110v
# 218301 220v
pricing.
Used as a troubleshooting system to detect
aberrations and surface quality problems in
processed lenses. Ideally suited for tabletop
use. Height and projection direction of the
lamp housing is easily adjustable by loosening
the knob. Lamp does not require a warm up
period before use.
BTX75LIS
XB075W/2 Replacement Xenon Light Bulb
Axis 221
Bulbs for Lensmeters
(Tv) Photometer™
OptiSource
Sentilles
The VL 1000 provides a very accurate measure of the refractive power of lenses and
gives the spherical, cylindrical and axis of the
lenses. This automatic lensmeter also contains the PD (pupil distance) measurement
and the UV Protection Ratio Test. It can measure both the uncut singular lenses and
framed glasses. Provides all the measurements you need: Progressive, Prism, PD, UV
& Contact Lens. Readings in increments:
0.01D, 0.125D, 0.25D and includes a printer
for inspection results.
Contact Visionix for current pricing.
Visionix VM 2500
Visionix
BPI
This finely crafted lensmeter is hand made in
Asia to the highest standards.Upon arrival in
the US, each unit is unpacked and inspected
by our technicians to ensure accuracy and
quality. The Axis 221 Lensmeter uses superior
quailty optics and includes a prism compensator in its user friendly design.
It is an invaluable aid for quality control of
treatment. The instrument also measures visible luminous transmittance, the internationally accepted measure of visible light trans32-AXIS221
mittance. This value may be used for fashion
tint density control as well as critical adjustB&L Model 70 Vertometer RC
ments on therapeutic tints such as BPI® Filter
OWC
Bulbs for lensmeters by referencing OEM
listed. 12603 AO 603 Lensometer, 4690 B&L
70 Vertometer, 70-25 Topcon LMGE
Lensmeter.
Lensmeter
Sentilles
# 119517 110v
# 219519 220v
The VM 2500 for FREEFORM allows you to
precisely inspect any lens and in particular
freeform progressive lenses. The Freeform
function makes it possible to inspect the lens
and to compare it to the theoretical map provided by the lens designer. Technology provides real-time mapping measurement, over
1,000 measured points and a PowerMap of
the entire lens. The unit analyzes the entire
lens, not just near and distance as with conventional lensmeters. The VM 2500 compares
theoretical (based on XYZ file) with the processed lens to provide a map of the entire
lens surface. This will aid in evaluation of the
prescription plus help in process control for
surfacing. One button operation and quality
criteria which can be used for Go/NoGo decisions.
BPI
7060 Illuminated Polariscope
Western Optical
High quality ophthalmic instrument for measuring and marking lenses brought back to
life. These reconditioned Lensmeters from
A.O. are a reliable industry standard. Large
instrument base provides stability and comfort in use. Works with lenses, glasses, and
contacts.
Pre-owned and reconditioned. The large
power drum on the right side allows easy
critical control of the power setting to +/- 20
diopters. The cylinder axis drum on the left is
marked 0° to 180° and facilitates locating the
#12603-R Lensmeter Model #12603 Reconditioned
lens axis. With the eyepiece reticle lens,
The BPI RGB Spectrometer (BPI# 19504) is an prism power can be measured directly from
Visionix AV 4000
invaluable aid for matching the colors of tinted 0.25 to 5.00, and to locate prism base-apex
lenses or filters. It may also be used to check line. This instrument is used for offices or labs
Visionix
worldwide.
These B&L Vertometers are
CIE (L*,a*,b*) color coordinates.
reconditioned.
# 19504
MAR-101 Marco Lensometer
Optical Machinery
115 V.
Compact bench top model that you can hold
in your hand. Use for viewing stress patterns
in lenses or for determining polarity in polarized lenses. Operates using two AA batteries
Weight: 29 lbs Specs: 16”H x 7”W x 21”D
(included). 2-3/4”w x 2-3/4”h x 4”d.
Twisted Lens Alignment Fixture
Precision Tool
7060 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $76.00
PD Rulers
PD-82
A.I.T. Industries
Measures -20.0 D to +20.0D; includes a builtin prism compensator to 15 D (no auxiliary
lenses to lose), external power and axis readings; allows measurements of lenses from 30
to 90 millimeters with 90° inclination; excellent
for verifying contact lenses as well.
Quickly and accurately determines if your lens
slipped off axis during the edging process.
Simple to use yet, very accurate. Extremely
beneficial in checking drilled mount lenses.
Specs: 2” x 4” x 6”. 1lb.
In one step, the AV 4000 instantaneously compares the targeted lens prescription with the
actual prescription and displays on screen a
pass/fail indication with ANSI standards. This
allows the operators to quickly and efficiently
validate each lens, saving time and producing
a better product. The AV 4000 measures all
types of lenses, including single, bifocal, trifocal, toric and progressive. Pass/fail screen
displays downloaded prescribed lens data
against actual measured data. Measuring
range to 20 diopters. 20” H x 11.5” W x 12” D. The digital PD-82 meter uses the “cornea
reflection light” method. This operates by
10/12/11 12:08 PM
VISIONIX AV 4000
AUTOMATIC VALIDATION AND INSPECTION OF LENSES –
DESIGNED FOR LABS AND BACK OFFICE
In one step, the AV 4000
instantaneously compares the
targeted lens prescription with
the actual prescription and
displays on screen a pass/fail
indication with ANSI standards.
LENS LAYOUT/INSPECTION:
PASS/FAIL INDICATOR:
• Easy to mark, on-screen axis
• Highlights discrepancies
• Highest quality and accuracy
• Measures and checks all lens types,
offered today
• Fast centering of any kind of lens
including single, bifocal, trifocal,
toric and progressive
• Generates reports to identify and
reduce rejected jobs
ADDITIONAL BENEFITS:
• Connects to lab server to receive Rx information directly.
• Quickly and efficiently deliver verified and finished spectacles.
• Can be used as a stand-alone lensmeter.
[email protected]
www.Visionix.com
SF_Briot_FP_ads_2012.indd 2
10/11/11 11:37 AM
106
aligning luminous points on the pupils with the
measuring line. Results are displayed digitally.
Three measurements are given: right,
right+left, and left. Results are accurate to
within 0.25mm. Measurements can be made
for a single eye or both eyes. Possible to
measure PD of focusing-point distance ranging from 30cm to infinity. Distances from tops
of cornea to lenses or frames can also be
measured. Automatic shutoff. 2-1/4”h x
6-1/2”w x 10-1/2”d. 2lb.
Belrose Digital Pupilometer
ocular and binocular readings simultaneously.
POCKET PD METER 35.605
With this pupilometer you can take a distance
Vigor Optical
PD and the pupilometer will calculate the near.
It has a handy lock button to hold the last
reading until you reset it. Measures PD’s from
45-82mm. Automatically shuts off after not
This pupilometer features an easily visible
wide-angle LCD numeric readout. It’s easy,
user friendly function eliminates operator error
and increases measuring accuracy.
being used for one minute to conserve batteries. Comes with a one-year warranty. Uses 4
AA batteries (included) 10” x 7-1/2” x 3”, 2 lbs.
CX-8
SPECS
Belrose
Measurement options include PD and right/
left monocular distance. This instrument measures the distance between the pupils focusing on the light spot reflecting off of the
patient’s retina. Using a highly accurate linear
sensor, the reflection is bisected vertically to
take the reading.
Pupilometer
• Face plate design
• Digital raster display
Santinelli
• Adjustable for monocular & binocular PD
• Measuring range: 45-82mm
Data range: Binocular
Monocular PD 23-41mm
PD
46-82mm,
Distance Range: 300-infinity
Indication, Rounding and Asymmetric Error:
Power Source: DC6V (four AA batteries)
• Auto Shutdown when flat
Features the “cornea reflection light coincidence method”. This operates by aligning
luminous points on the pupils with the measuring line. Results are displayed digitally.
Possible to measure PD of focusing point
distances ranging from 30cm to infinity. Auto
shut off will save the life of the three AA batteries. Batteries and extra nose pad included.
Both light weight and durable at an exceptional value!!
Credit Cards accepted.
Belrose Digital Pupilometer Mod L8 . $295.00
Blerose Deluxe Frame Air Warmer
Model TW-1834
Automatic Off: After 2 minutes on standby
• Uses 12V battery (Duracell #MN21/A23 or
Size: 232mm length x 163mm width x 71mm
Energizer A23) not included
height
• 1 year warranty. . . . . . . . . . . . . . . . . . $150.00
Weight: 28 oz.
Rulers
2061DP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $360.00
Vigor Optical
2063 7” Dispensing PD Rule
Western Optical
Our ergonomically designed digital pupilometer shows accurate readings on an easy to
read LED Display.
6” PD White Plastic Ruler
Measures binocular and monocular PDs rang- Width 5/8”. Graduated in mm and 1/16”.
ing from 43 - 83 mm. in .05 mm. increments. A Flexible. 1oz.
large dial for distance settings allow the 35.500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.00
operator to select from 30 cm. to 8. (Batteries 6” Wooden PD ruler (Pictured)
Black lettering in both inches and mm. Will not 2063 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.25
scratch frames or lenses.
included.)
“T” Seg Height Ruler
Belrose
Millimeter markings read in the same direction
for accurate seg height and PD measurements. Specs: 7-1/4” long.
Vigor Optical
35.507. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $30.00 ea.
7” PD White Plastic Ruler
2064 6” White Plastic PD Rule
Western Optical
Graduated in mm and 1/16”. Flexible. 1oz.
35.502. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.00
Boxwood and Plastic PD Ruler 6”
See-thru T-shape ruler for seg measurements.
Will not scratch frame or lens. Measures both Sturdy white plastic with both millimeter and
inches and mm. 3oz.
inch scales in black. Beveled for comfort.
35.501 Pkg. of 3. . . . . . . . . . . . . . . . . . . . . . . . . . $69.00 Specs: 6-1/4” long.
2064 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.25
Gauge
Sturdy, yet flexible gauge is transparent with
Used on both multifocal and progressive Red embossed millimeter scales on both
sides for quick and accurate seg measurelenses.
This all new Blerose Deluxe Air Warmer is for
ments. Gauge is 3-1/4”l and measures up to
high End and Deluxe Applications. Heat range 35.215. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.00 ea. 40mm. Sold in pairs. Ship wt. 20oz.
via rheostat Knob is from 270 to 390 degrees. 35.215D “T” Seg Rulers, One Dozen . . . . . . . . . $59.00 35.220. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12.00
Multiple fan speeds for precision heat control
Diagonal Cut Metal PD Stick
2061 Monocular Manual Pupilometer
on delicate frames. Measures 8 inches tall by
12 inches of depth and 8 2/1 inches tall.
Western Optical
Vigor Optical
Includes frames adjusting holder for pinpoint
operation.
TW-1834
Introductory prices Only . . . . . . . . . . . . $249.00
PD Rulers
Metal with Black lines, one end diagonal cut
Precision Tool
from 0.0mm to 9/16”. Diagonal cut end rests in
deepest eyewire groove for exact A&B mea-
surement. 6” metal PD stick.
Precision Tool now offers PD Rulers for your 35.509. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3.50
precision measuring needs.
Digital Pupilometer_
Opti-Rule
Vigor Optical
PSI
PSI’s Opti-Rule is a “T” square designed to
assure the accuracy of the box measurement
of the frame. SEG height is unilaterally defined
to eliminate error. Easy to read.
Item #120 Pkg. of 5
Western Optical
No more “eyeballing” eyewire measurements!
The ends of this rule are notched for easy and
accurate eyewire readings. White numbers on
red field run in opposition so that the rule
always reads in the correct direction.
Increases accuracy and eliminates fumbling.
Specs: 7-1/4” long.
2065 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.25
2066 6” Stainless Steel PD Rule
Western Optical
Flexible steel with engraved millimeter scales.
Tapered end fits into eyewire groove for accurate readings. Specs: 6-1/4” long.
2061 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $32.00
2066 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.75
2061DP The DigiOmeter Digital
Pupilometer
2067/5 The PD Extender
Western Optical
Western Optical
PSI’s Pupilometer
PSI
The quick and easy way to take highly accurate measurements of the patient’s monocular
and binocular interpupillary distance (PD). The
higher the prescribed lens power, the greater
the need for precise PD measuring. Reduces
costly do-overs of high prescription eyewear
due to inaccurate measuring. Excellent to
keep on hand as a back up for your electronic
pupilometer. All polycarbonate construction.
Complete with easy to follow instructions.
2065 7” Laboratory Millimeter Rule
• Compact, lightweight, & easy to read display
• Simultaneously measures monocular & binocular PD• Measures from near to infinity •
Measures
single
eye
22.5mm-41mm•
Measures dual eye PD from 45mm-82mm•
Memory feature stores data until reset
• Auto shut-off after 1 minute of inactivity•
PSI’s Pupilometer is redesigned for the 21st Uses 4 AA batteries not included
century. Lightweight & compact, it features an 35.600
easy to read digital display to view both mon- Digital Pupilometer . . . . . . . . . . . . . . . . . . . . . . $295.00
Accurately measures bifocal placement from
the pupil to the lowest point on the eyewire.
Great for taking box measurements. Minimizes
miscommunication with the lab. Clear plastic
with black scale. 7” long.
2067/5 Set of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . $21.00
The DigiOmeter provides digital accuracy Dispensing PD Rule
when measuring interpupillary distance (PD). 2063 Millimeter markings read in the same direction
10/12/11 12:08 PM
VISIONIX VL 1000
A VISION OF THE FUTURE
Easy to use with the highest
precision, the VL 1000
automatic lensmeter provides
all the measurements you
need: Progressive, Prism,
PD, UV & Contact Lens.
• Recognizable icons provide a user friendly graphical
interface for an immediate understanding.
• Automatically measures progressive lenses
with a graph to improve accuracy and speed in the
measurement of near and far vision.
More attractive,
more convenient,
more stable.
[email protected]
www.Visionix.com
SF_Briot_FP_ads_2012.indd 1
10/11/11 11:34 AM
108
for accurate seg height and PD measuring., 7-1/4”.. . .
$2.25
Laboratory MM Rule
2065 Notched end for easy and accurate eyewire
readings. White numbers on Red field run opposite so
rule always reads in the right direction. 7-1/4”. . $2.25
Stainless Steel PD Rule
2066 Flexible steel with engraved millimeter scales.
Tapered end fits into eyewire groove for accurate
readings. 6-1/4”. . . . . . . . . . . . . . . . . . . . . . . . . . . $2.75
White Plastic PD Rule
2064 Has both millimeter and inch scales in Black.
Beveled for comfort. 6-1/4” . . . . . . . . . . . . . . . . . $2.25
2069 PD_ Multi-Rule
Western Optical
Standard Gauges
lenses. This makes the gauge ideal for verifying stock removal during the generating, fining, and polishing operations.
instantly calculates and displays thickness
Coburn
information to 0.01 mm - Precision machined
bell with radiused contact points provides
Precision machined and hardened plano test
block for checking and setting sagitta gauges. extended wear and preserves radius accuracy
- Standard bell accommodates block diame80073-00 Rectangle
ters up to 60 mm - Generator thickness
82759-00 Round
adapter for easy calibration of surface generators - Advanced transducer technology - High
ECONOMY LENS CLOCK 35.210
contrast multi line LCD display - Sealed memVigor Optical
brane keypad - Included calibration standards
allow quick and precise calibration to compensate for room temperature changes and
other variables - Heavy duty aluminum and
steel construction provides rugged durability
and an extremely stable platform
OWC
Sagitta Gauge Test Block
White 6” Notched PD Sticks
Measures lens center thickness to 0.1mm.
Accommodates up to 25mm in thickness and
over 100mm in diameter. 3”w x 4.5”d x 12”h.
3lbs.
Combination Lens Thickness Gauge
Specifications
Three rules PLUS a pinhole occluder. Use the
scales on this rule to measure binocular PD,
monocular PD, seg height, bridge, DBL of
frame and eyewire A and B dimensions. A
A value priced lens measuring device featurpinhole occluder tests visual acuity. 7-3/8”
ing ball tips and measuring +/- 20 diopters.
long by 1” wide.
Packed in a box. Index 1.53. Warranty 12
2069 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3.25
months if not dropped . . . . . . . . . . . . . . $70.00
Prism Gauges
WLTG-D Digital Lens Thickness
Gauge
Precision Tool
Size: 6.2” W • 10.75” D • 20.3” H
Weight: 12 lbs
Power: Transformer
50/60Hz, 1~ to 24V
-
120V-240V,
0.1A,
Lens Thickness Gauges
Optical Machinery
Vigor Optical
Precision’s table top, lens thickness gauge is
designed for fast and accurate lens readings.
Highly versatile, this gauge will measure lensonly or block lens with Gerber Coburn or LOH
style block. Comes with zeroing standard and
tilt adjustment for optimum reading position.
Prism Gauge
Coburn
Digital Lens Thickness Gauge
Precision Tool
Precision gauge measures center thickness of
Sturdy rule, with graduations in millimeters uncut lenses. Accurate to 0.01mm.
and 1/16”. Notched edge. White with black OM-35 Digital Lens Thickness Gauge
markings. Available each 35.506W for $2.50 or OM-53 Mechanical Thickness Gauge
value pack 35.506WD x12 $24.00
Direct reading. Particularly valuable when Price Varies
checking for prism after generating or fining
plastic or glass lenses. Insert blocked lens, Thickness
measure edge thickness differences in both
base and cylinder axes. 181854.
WPRM-D Prism Gauge
Gauges
OM-TG Blocked Lens Thickness
Gauge
Optical Machinery
TG-X Thickness Gauge
Now available from Prescision Tool
Technologies, a digital thickness gauge
designed to be used anywhere in the lab.
From the blocker to the generator, this gauge
can be used for may of your inspection operations. You can determine: 1) center thickness
of your lenses 2) amount taken off by the
generator, fining and polishing procedures 3)
prism with the specially designed contacting
points. The gauge can be set to zero at any
point in its travel. Its user friendliness achieves
quick and accurate measurements very economically.
Coburn
OWC
Lens center thickness is measured accurately
to 0.01mm with this precision built instrument.
This gauge is designed with extra clearance
for loading and unloading of extra thick
blocked lenses. Heavy-duty stainless steel Contact Precision Tool for current pricing.
base prevents gauge from tipping over during
Table Top Type Measuring Gauges
use. Gauge features a mechanical stop to
Satisloh
prevent damage to indicator and for easy
calibration. Available for use with Gerber-LohCoburn-Semi-Tech blocking methods.
Sturdily built gauge has an exclusive clutch
protecting the plunger mechanism from damage by rough handling. Gauge has dual funcEasy-to-use digital gauge to check prism on
tion: will measure center thickness as well as
blocked lenses. Built-in alignment features for
the front curve of an unblocked lens when the
50mm thickness difference. Available in all thickness is known. Gauge opening is approxContact Optical Machinery for current pricing.
blocking styles. 5.25”w x 6.5”d x 13”h. 10lbs. imately 35mm and will accept extra thick
WCTG-D Blocked Lens Thickness
lenses without removing the fiber ring. TG-X
82730-00.
Gauge
Combination Prism Gages
Precision Tool
AT138 Thickness Gauge
OWC
Optek
Center thickness gauges with dial indicator.
Accuracy of 0.01mm; for blocked or finished
lenses; also combined version.
Designed to check unwanted or wanted prism
in generated lenses. Works with generated
prism system or prism blocked system. Easy
to use, very precise, gives reading in 50mm
and 35mm diameter.
To read center thickness or blocked lens simply dial front base curve, load blocked lens
The ACCUcomp AT138 Thickness Gauge fea- and read center thickness. 13”h (33cm) x
tures precision microprocessor control and 5-1/2”w (14cm) x 7”d (17.8cm), 13lb (6kg).
advanced transducer technology. The AT138 Digital.
is designed to measures the center thickness WCTG-D
of free and blocked finished and semifinished Contact OWC for current pricing.
10/12/11 12:08 PM
LENS TEMPERING
109
Computer ChemTemp
Delivers a 5/8” or 7/8” or 1” steel ball. Safety
DROP BALL TESTER
BPI
shield contains lenses and ball. 8”-high
Sentilles
Chemical Units
shielded area, overall height 52”. 37lb (16.8kg).
405A Chemical Treatment Unit
19109
A.I.T. Industries
OM-632 & OM-632A Manual &
Automatic Drop Ball Tester
Optical Machinery
Fully automatic from immersion to retraction;
tempers both photochromic and crown at the
same time. Through its unique design with
removable tanks, system can be configured to
do all photochromic or all crown lenses as
desired. Complete with two racks. The control
center shows elapsed time and temperature
for each of the two tanks. You can choose to
heat one tank only. In case of power failure,
back-up batteries supply power to automatically remove lenses from the tanks and continue operation when power returns. Comes
with one tank of photochromic and one tank
of crown salts. 19-1/4”h x 17”w x 15-3/4” front
to back. 90lb (43kg). 7792 115V, 207805 220V.
7800: 115V. Also available: Production Chem
Temp™. New design for high production tempering. Capable of doing 36 pair simultaneously.
For O.D. or small lab user. Strengthens crown,
photochromic glass at same time. Fully automatic. Two separate tanks in one chassis with
separate controls and electrical components.
Each tank accommodates 75 lenses (standard
model 100 lenses with 4 trays, 150 lenses with
6 trays). Self-retrieving in event of power failure. Individual variable controls ±.5% accuracy up to 600°C. Solid state deviation meter to
prevent underheat or overheat in either salt
tank. Each tank has backup thermostats, one
for overheat, the other for initial salt melt.
Cycle time — 16 hours. 27”h x 34”w x 16-1/2”d
(41.9cm x 68.6cm x 8.4cm). 120V, 60Hz.
1600W.
A00405A 75/75 lens capacity
Chemical Treatment Unit
OM-44H Hand-Held Polariscope
Optical Machinery
DROP BALL TESTER #87 (5/8”, 1”, or DUAL
5/8” & 1)
OM-632 Manual Drop Ball Tester. Manual drop
ball tester accommodates both 5/8” and 1”
ball sizes; single ball drop; lens retention
cover; certified O-ring ball rest; Plexiglas door
to retain ball and flying glass after ball has
been dropped.
OM-632A Automatic drop Ball Tester (not
shown). This tester is the only one manufactured today; excellent for the mid to large size
Ergonomically designed for operator comfort
and in compliance with all current FDA and
ANZI Z87.1 regulations and standards. Tester
comes in three different models shown below.
Easy to use - Operator places lens to be
tested on lens support, closes outer rotating
chamber either right or left to protect operator
from flying pieces of lens in case of breakage.
He then places ball onto the round tray, partially up the tube and raises lifter with steel
ball to top of tube length. The ball releases
itself into the tube and free falls 50” to impact
lens within a 16 mm circle to complete
required lens impact testing. Operator can
open rotating chamber to retrieve the lens.
Accessories:
87-058
lab; holds 50 each 5/8” balls in magazine; a Drop Ball Tester with 5/8” ball for Dress Wear
switch in base of unit cycles balls to drop; 87-100
Drop Ball Tester with 1” ball for Safety Lenses
5/8” tube size only; all other specs are the 87-123
A.I.T. Industries
same as the OM-632 pictured above.
MultiMeter
OptiSource
The Hand-Held Polariscope quickly detects
uneven stress patterns in glass, CR-39, and
polycarbonate lenses. This hand-held version
Automatically controlled. Dependable accuis lightweight and requires no electricity.
racy for either crown or photochromic glass. Contact Optical Machinery for current pricing.
Maintained by the finest instrumentation availMytee Twin-Chem Tempering Unit
able. Front loading for operator’s safety. Back75/75
up controls in event of malfunction. Selfretrieving in event of power failure. Easy to
Sentilles
Our Multimeter is a first-of-its-kind, multifuncoperate. Built for safe and dependable use.
tional digital UV meter. The single unit works
Table mounted. Includes trays and salt.
as a UV Spectrophotometer, Photochromic
Dyna-Kem:
lens demonstrator and Visible Light Meter. In
400 pair or 800 lenses; Honeywell temperature
just seconds it will activate Transitions or any
controls; table mounted; steel cabinet optionbrand photochromic lenses. It will also meaal; 34-1/2”h x 43”w x 27”d (87.6cm x 109.2cm
x 68.6cm); 240V, 60Hz., single phase, 4kW.
sure UV transmittance of any lens and Visible
A00400A
Steel ball 5/8” Round (16 mm) weight .56 oz
87-124
Steel Ball 1.0” Round (25.4 mm) weight 1.56 oz
87-158
Dual Drop Ball Tester 5/8” and 1” combined
87-058
Drop Ball Tester with 5/8” ball for Dress Wear
87-100
Drop Ball Tester with 1” ball for Safety Lenses
87-123
Steel ball 5/8” Round (16 mm) weight .56 oz
87-124
Steel Ball 1.0” Round (25.4 mm) weight 1.56 oz
87-158
Dual Drop Ball Tester 5/8” and 1” combined
Drop-Ball Tester
Sentilles
Light transmittance of colored lenses.
Mytee-Kem:
99-MULTIMETER
Variable thermostats for overheat, initial salt
melt; 130 pair or 260 lenses; 24”h x 28”w x Automatically controlled to operate on 16
Manual Drop-Ball Tester
hour
cycle.
Accurate
and
trouble
free.
Self14”d (61cm x 71.1cm x 35.6cm); 240V, 60Hz.,
retrieve feature in case of power failure. Has 2
single phase, 3kW.
OWC
A00403N
chambers: 1 holds 75 crown and 1 holds 75
photocromic glass lens – all lenses treat at the
same time. 27”x 34”w x 16.5”d. 255 lbs., 120V,
BPI Production Chem Temp™
60 Hz, 14A.
BPI
Unit conforms to FDA requirements of 1971.
Operates manually to test tempered lenses.
With lens on base, place steel ball on top of
guidance tube, then release. Ball free falls
through tube on strike lens. 52.5”h x 4.5”w x
5”d.
407-1932
Thermal Units
Lens Testers
407 Air Tempering Unit
A.I.T. Industries
The Square Shooter Drop-Ball Tester
BPI
Meets FDA requirements; includes 27lb
(12.27kg) steel base. Delivers 5/8” (1.58cm),
7/8” (2.22cm) or 1” (2.54cm) steel balls to test
The BPI Production Chem Temp™ is a new
design for high volume tempering. Tempers
up to 72 lenses at one time. This instrument
will also do either crown or photochromic
glass. 22”h x 16.5”w x 15.5”d.
207805 220V
7783 115V
dress or industrial lenses. Guidance tube
eliminates need to level. Door prevents lenses
or balls from bouncing to floor.
024 5/8 inch
124 1 inch
Tests tempered lenses. Manual drop-ball tes- 224 Dual Drop Ball Tester
ter meets all FDA and ANSI standards. Contact OWC for current pricing.
109-110_SF1110_LensTemp.indd 109
Air-temp hardens one pair of crown or photochromic lenses in minutes. Timing cycle is
automatic. This simple, economical device
does not require an air compressor.
Temperature can be precisely controlled with
10/12/11 12:00 PM
110
LENS TEMPERING
an external dial. A polariscope is attached and
a lens caliper and timing chart are included.
Drop- Ball Test is not included. Tempering
unit: 13”h x 15.25”w x 16”d, 59lb., 120V, 60Hz,
8.5A.
01932 Testing unit: 52.5”h x 4.5”w x 5”d, 4.25lb.
A00407N
Computer Heat Temp II
BPI
scope for quality control and NASA-type insulation for energy efficiency. The cool-flow
cabinet design prevents heat loss to outside
surfaces in order to keep the lab from overheating, an important factor in safety of operations. 18”h x 12”w x 13-1/2”d. Shipping
weight 51lb (23.2 kg).
16202 115V
216202 220V
52000 Crownsalt 6 pk
52100 Set of 5 Pyrometric Cones for calibration.
listed.
25-101 B7L 1061 Polariscope Bulb
495-13356 CMV 380 Polariscope Bulb
495-13356 CMV 8282 Polariscope Bulb, Shuron
495-13356 Polariscope Bulb
not required – unit is self-contained. 13”h x
15.25”w x 16”d. 59 lbs., 120V, 60 Hz, 8.5A.
407-02
Sure Heat Tempering Unit
Sentilles
Bulbs for Heat Treat Units
Sentilles
Eliminate guesswork when heat tempering
Heat treats one pair of crown or photocromic
lenses. Automatically heat tempers lenses in
lenses in minutes. Timing automatically varies
minutes. All the computer requires is the type
according to timing charts supplied for
of glass and average thickness. Due to unirespective lenses. Temperature precisely conform cooling of lens surfaces and edges, Bulbs for heat treat units. Reference OEM trolled with external dial. Polariscope
breakage is minimized. Side-mounted polari- manual or call for assistance. Popular bulbs attached, Calipers supplied. Air compressor
109-110_SF1110_LensTemp.indd 110
10/12/11 12:00 PM
WECO CAD 5 Automatic Blocker
Blockers
A.I.T. Industries
Combimax Evolution
A.I.T. Industries
tem in Coburn’s broad line of lens processing
products. Eclipse Surface Blocker LX model
offers standard layout and blocking features,
higher throughput, plus several new features
such as automatic material fill with overflow
sensors and an automatic block and lens
detection system. The Eclipse Surface
Blocker LX model dispenses FreeBond™ wax
and employs either Coburn’s standard pin
blocks or AcuBlock™ blocks. The Eclipse
Surface Blocker is easy to use. With its automatic one-touch blocking feature, operators
block and chill the lens in one simple, step,
further consolidating the surface blocking
process. The FreeBond LX model can block
up to 90 lenses per hour. 115 V, single phase,
50/60 Hz with ground, 10 Amp or 230 V, single
phase, 50/60 Hz with ground, 5 Amp, Air
requirements: 80 psi clean, dry compressed
air at 3 CFM Dimensions: 30” w x 27” d x
27-1/4” h Weight: 125 lbs wax model, 161 lbs
alloy model.
The WECO CAD 5 camera assisted blocker
has an advanced decentration and blocking
system with innovative features such as automatic drill-point recoginition and shape modification. The built in high-tech optical recognition and image processing system enables
the precise positioning of drill holes and
notches. In addition to this, the shape modification system is designed to easily modify the Contact Coburn for current pricing.
lens shape of rimless frames. This makes the
Excelon Manual Blocker
processing of drill-mount frames nearly effortCoburn
less. Finally, the elimination of any human
intervention during centering and blocking
operation reduces the chances for user error,
saving you time and money.
The Combimax unit combines the tracer, centering device and blocker all in one. The tracer
system’s unique Dual Scan Tracing system
(DST) enables both eyes of the frame to be
traced simultaneously. Its exclusive patented
Digital Image Processing system enables the
Combimax to directly recognize the identification marks of a single vision, bifocal or progressive lens, allowing it to process the information and center the lens automatically. This
unique system is the only one available capa- Contact A.I.T. Industries for current pricing.
WECO Verifier Pro Turbo 2 Lens
ble of completely eliminating parallax error.
Other features such as Windows icon-based
Verifier
interface, prismatic value calculation, high
A.I.T. Industries
definition TFT color screen, automatic entry of
stylus, buffer job memory and hands free
blocking make the Combimax tops in the
industry for tracing and layout. 12.91”h x
16.14”w x 14.76”d. 220V/50Hz, 110V/60Hz.
400W.
Speede Blocker
A.I.T. Industries
The Speede Blocker has set the standard for
high-speed finish layout and adhesive blocking. New features include horizontal decentration and enlarged vision screen for viewing
and blocking, unique horizontal and vertical
alignment adjustments. Adapters are available for most blocking systems. Eliminates
layout marking. Eliminates parallax and seg
distortion with binocular reflection viewing.
Fast lever motion presses block exactly on
target. 16-1/2”h x 8-1/2”w x 12”d. 16lb. 120V,
60Hz, 0.25A (other voltages available).
1001
WECO CAD 4 Semi-Automatic
Blocker
A.I.T. Industries
111
FreeBlocks eliminate finish block inventories,
leap pads, the pad-up process and pad windup. They provide exceptional torsional
strength that reduces slippage and axis errors
during edging.
200333 1000/bag
201713 5000/box
FreeBond Blocking Adhesive
Coburn
Proprietary, thermoplastic adhesive eliminates
alloy use, reclaim and waste management.
Formulated to remove health hazards and
environmental risks in surface blocking.
FreeBond’s low melting and blocking temperature and low density results in cooler lens
processing
and
fewer
aberrations.
Approximately 240 lenses can be blocked per
gallon.
164322 One gallon–4 slabs
164342 Four gallons–16 slabs
FreeWash and FoamFree Defoamer
Coburn
Concentrated solutions for use in the Step
One Blocking Systems’s Lens Washer.
FreeWash assists in the removal of FreeBond,
polishing residue and markings. Use in conjunctions with FreeFoam defoamer to minimize foaming. Mix 1oz of concentrated
FreeWash with 1gal of water.
The Excelon series provides the versatility and
Combine the Excelon or XD series Edger and
Tracer with this compact, simple and easy to
use blocker for a complete solution customized to meet your specific finishing needs.
Features simple controls and functionality in a
small footprint to provide an economical
The Verifier Pro Turbo 2 is an advanced, high blocking solution.
volume lens blocker that has been specifically Contact Coburn for current pricing.
designed for industrial use. It includes high Excelon Smart Semi-Manual Blocker
precision power measurement and verificaCoburn
tion capabilities for nearly all types of lenses.
The recognition of bifocal near vision segments and printed progressive lenses is
extremely reliable and accurate, regardless of
the lens position in the lens tray. Also, hidden
markings or engravings of progressive lenses
can be recognized automatically and instantly
in most cases. The main advantages of this
system are high precision in measurments
and the way the blocking system minimizes
human interaction and in turn, human error.
The Verifier Pro Turbo 2 can be integrated
effortlessly in a multi-machine edging net- The Excelon series provides the versatility and
work.
Combine the Excelon or Excelon XD series
Edger and Tracer with this compact blocker
Blocks For Step one & Eclipse
for a complete customized solution with supeBlocking Systems
rior performance and ease-of-use. Features
Coburn
touch screen with intuitive graphic icons on a
wide high-resolution LCD. Includes auto-balancing lens support and lens holder with LED
lamp for ample illumination. Lens, frame or job
storage by using SD card slot. 9” w x 10” d x
15” h, 15 lbs, , 110/220 VAC, 50/ 60Hz. THREE
YEAR WARRANTY.
162522 FreeWash–16oz.
162543 FreeWash–6 pack (5 FreeWash, 1 FoamFree).
163782 FoamFree–8oz. bottle
173801 FreeWash–4 pack of 1/2gal.
173811 FreeWash–1/2gal (64oz. bottle).
186572 FoamFree–16oz. bottle
CLARITY analyzer/blocker
National Optronics
A first from Optronics, the CLARITY automatically aligns, verifies, and blocks virtually any
lens. Lenses can be placed in any position
and are automatically aligned on axis by the
machine. This eliminates operator error and
speeds processing up to 60 jobs per hour. It
utilizes a unique comparative system unlike
any device of its kind, creating greater
accuracy than its competitors.
Optronics 3B Blocker
National Optronics
FreeBlocks™
Coburn
Step One Blocking System Blocks are compatible with most surfacing equipment that
accepts conventional-style blocks. With no
large fill and polish pin insert holes on the
block surface, the possibility of lens aberrations is reduced.
170411 A-Red 2 base blocks 10/pkg.
170421 B-Blue 4 base blocks 10/pkg.
170431 C-Gray 6 base blocks 10/pkg
170441 D-Gold 8 base blocks 10/pkg
170451 F-Green 10 base blocks 10/pkg.
The WECO CAD 4 is a semi-automatic blocker
that is easily operated with remarkable accuracy. A large high-resolution color LCD screen
offers a well organized and intuitive interface.
The CAD 4 also features the same optical
Eclipse Surface Blocker™ LX
scanning system as the CAD 5, further
enhancing its feature set. A single button push
Coburn
allows a pattern or demo lens to be scanned
The Eclipse Surface Blocker LX model is the
automatically, including drill-holes.
latest state-of-the-art surface blocking sysFor ordering information, please see the Manufacturers and Distributors Guide.
111-120 Markers, Blockers & Patterns.indd 111
Optronics’ 3B Finish Blocker was designed to
meet today’s needs, in any finishing laboratory, for speed, accuracy, reliability and low
maintenance. Beginning the development
process with customer input, the Engineers at
National Optronics utilized projection imaging
to monimize the opportunity for parallax and
for accidental refraction associated with other
blockers on the market. The result is increased
accuracy and reduced rejects associated with
blocking error.
Conformable FreeBlocks designed of a proprietary thermoplastic compound for use with
the Step Two Finish Blocker. FreeBlocks conform precisely to all kinds of lenses, maintaining full contact on any front curve and across
segments. A single block style accommodates all lens types including half eyes. Contact National Optronics for current pricing.
10/12/11 11:19 AM
112
Key Features include: dispenses traditional
OM-990-RB Alloy Surface Blockeralloy or wax material; integrated touch screen
Rebuilt
control system; automatic lens hold down
Optical Machinery
during cooling; quick-interchange blocking
240A Surface Blocker
molds allow use of the optimal support diamOptek
eter; pressurized material delivery system
allows smooth and controlled dispensing of
blocking compound; enclosure is constructed
of heavy duty 16 gauge sheet metal — no
injection molded plastic; control system is
easily software-upgradeable; Ethernet or serial interface capability with host Rx software;
floor and bench configurations available. Size:
Efficient, low cost blocker; uses pump-like
21” W • 28.5” D • 17.5” H (bench) or 35.5” W
injection system negating pneumatic hookThe 240A blocker is a model of simplicity, flex- • 25” D • 53” H (floor); Weight: 214 lbs (floor).
up; separate, adjustable, solid state temperaibility, and reliability. It features a patented Contact Optek for current pricing.
ture controls for both pot and stem; low alloy
pressurized material delivery system, precision thermal control, and is designed for alloy
AIT-1001 AIT Speede Blocker
alarm; adjustable work light; 110 volt, 50 lbs.
blocking.
Blockers
Optical Machinery
Key Features - Standard surface blocking with
interchangeable blocking molds allows selection of the best support diameter; Uses industry-standard 43 mm blocks; Patented pressurized material delivery system allows smooth
and controlled dispensing of blocking compound; PLC thermal system precisely controls
blocking compound temperature; Thermal
system LCD displays temperature and system
diagnostics; Large pot capacity
OM-C99-RB Alloy Surface Blocker-
Gerber Coburn Step One Blocker RC
OWC
Integrated layout and blocking system. Can
be connected to most major software systems.
Weight: 125 lbs Specs: 25”H x 30”D x 79”D
Metal Blocker 99RB
OWC
Rebuilt
Optical Machinery
Specifications
· Size: 11.5” W • 22” D • 24” H
This blocker has set the standard for highspeed manual layout and adhesive finish
· Power: 120V, 6A, 60Hz, 1~ (other voltages blocking; features include horizontal decentration and enlarged vision screen for viewing;
available)
unique horizontal and vertical alignment
250A Prism Blocker
adjustments; eliminates parallax and seg distortion with binocular reflection viewing; lever
Optek
motion presses block exactly on target; blocking adapters available for your blocking system. 110 volt, 16 lbs; 16-1/2” x 8-1/2” x 12”.
· Weight: 51 lbs
OM-002 Dual Center Blocker
Simple and durable blocker. Can be used with
either glass or plastic. Rugged industry standard for blocking. 12”h x 11”w x 18”d (31cm x
Efficient, compact, low cost blocker uses 22cm x 46cm). 50lb (22.5kg). 115V AC,
pump-like injection system negating pneu- 50/60Hz, 1 phase, 10A. 220V available.
matic hook-up; separate, adjustable analog Contact OWC for current pricing.
temperature controls for both pot and stem
Replacement Parts-Eclipse & Step
and thermal safety switch; NO ‘low alloy’
One Blocker
alarm. 110 volt, 50 lbs.
OWC
990 Blocker
OWC
Optical Machinery
“The 250A blocker is a model of simplicity,
flexibility, and reliability. It features a patented
pressurized material delivery system, precision thermal control, and is designed for alloy
blocking. Key Features - 360° prism blocking
of up to 4 diopters of prism in 0.1 increments—0 to 2 diopter mold standard, 2 to 4
diopter mold optional; Uses industry-standard
43 mm blocks; Patented pressurized material
delivery system allows smooth and controlled
dispensing of blocking compound; PLC thermal system precisely controls blocking compound temperature; Thermal system LCD
displays temperature and system diagnostics;
Large pot capacity
Specifications
· Size: 11.5.5”“ W • 22”“ D • 24”“ H
· Weight: 54lbs
· Power: 120V, 6A, 60Hz, 1~ (other voltages
available)
Replacement parts for Eclipse and Step One
Blockers.
Model 990 RC Gerber Coburn alloy blocker. Contact OWC for current pricing.
Dual temperature controllers. Easy diaphram
Space Saver Blocker
No prism calculation for decentration. No fiber type pump to ensure alloy flow. Comes with
OWC
rings, no prism rings. Prism ground automati- low alloy alert.
cally for decentration. Lenses are generated
Weight: 50 lbs (22.5 kg) Specs: 11” h x 11 1/1”
on true optical center eliminating unwanted w x 21 _” d
prism. No centers to replace or wear-out and Contact OWC for current pricing.
no blocks to clean. Lenses are fined and polGerber Coburn Eclipse Surface
ished on true mechanical center.
OM-004 Alloy Blocker
Blocker RC
OWC
Optical Machinery
Unity MAX Blocker
Optek
Compact design requires less than 1 square
foot of table space. Digital set temperature
controller maintains 1° accuracy. Lowpressure system assures proper flow of blocking material. Capacity over 20lb of 117° alloy.
Capable of using new wax materials as well as
alloy. Easy to read LED display. Large gauge
and air regulator conveniently located on the
front panel. Uses industry standard blocks.
Crucible is pressurized during the blocking
process only, thereby avoiding the dangers of
a constantly pressurized pot. 12”h x 8”w x
13”d. 20lb (9kg). 110V AC, 6A. Other voltages
available.
Eclipse Surface Blocker RC. Gerber Coburn
state-of-the-art layout and blocking system.
This alloy blocker works well for blocking Less than 1 minute blocking time. Outside
glass or plastic on steel or aluminum blocks. chilling ysytem. LX, Turbo, Turbo Alloy modThe blocker features gravity flow alloy and els.
The Unity MAX blocker combines highly accurate lens layout and blocking into a single, superior temperature control.150 VAC-10 Weight: 125 - 165 lbs depending upon model
WSSB
type Specs: 30”W x 27”D x 27 1/4”H
compact station. It offers the precision and amps
reliability of software-based lens alignment. Contact Optical Machinery for current pricing.
10/12/11 11:19 AM
Blockers
W95A RC Alloy Blocker
OWC
used with the Gerber style block. A compact using the Navigation Operation Bar which
designed blocker requiring about 1 square provides useful “next-step” information.
foot of table space. The digital set tempera- Contact Santinelli for current pricing.
ture controls, with easy to read LED display,
Ice 900 CAD Blocker
maintains accuracy while the low pressure
Santinelli
system assures proper flow of blocking material. Separate air supply is required. 13”h x
9”w x 17”d (33cm x 22.8cm x 45.7cm). 28lb.
(12.7kg). 110V, 7A. Other voltages available.
WSWB-G
WSWB-GM Mid Size Non-Alloy
Blocker
OWC
113
features include block ring recognition – automatically checking for the correct blocking
ring – only then can blocking occur. Auto-fill
feature creates a consistent alloy wafer on
every lens – minimizing operator intervention.
Operator notification for block ring change
eliminates error. PRA automatically adjusts
prism angle, prism basis and the axis of the
blocking chuck. Block ring recognition and
auto-fill can be activated or deactivated as
needed. Specs: 27.5” x 31.5” x 39” (w x d x h).
221 lb. 1.0kVA.
Bulbs for Blocker–Shuron or CMV 181
The Ice 900 is one of the most advanced CAD
lens blockers available. This highly intutive
unit features the Integrated Shape Imager
(ISI), which photographs any demo lens,
including those for rimless drill mounts, and
identifies hole position. The ISI function is
supported by a “Wizard Tutorial” directly on
the screen of the unit, including computer
generated renditions of its operation.
Air control alloy blocker with digital temperature display. Low alloy indicator light. 11”h x
11-1/4”w x 21-1/4”d (28cm x 28.6cm x
53.9cm). 68lb. (31kg). 115V, 10A, single phase
WDC RC Dual Center Blocker
OWC
A larger blocker using Gerber®-style blocks.
Air controlled blocking without the use of
diaphram or valve in contact with the wax.
13”h x 9-1/2”w x 19”d, 38lb, 110V, 10A.
CE9 Manual Blocker
Santinelli
Sentilles
In addition, the unit has an Advanced Shape
Editor function which edits shapes in a completely customizable fashion. The data man- Bulbs for Shuron/CMV 181 Alloy blocker.
agement feature allows for storing, searching, 181-09118 Shuron/CMV 181 Alloy Blocker
and recalling of traced data. Moreover, the Contact Sentilles for current pricing.
compact unit enables the operator to send
Lens Cleaner
data to a lab through an internet porthole or,
in lab environment, directly to an LMS.
Sentilles
The all new motorized lens blocking process
takes only two seconds, increasing productivity. A unique Tilt Display allows the LCD
operation screen to be viewed from 2.7 to 6.0
from vertical, making it ergonomically friendly
whether sitting or standing.
All alloy blocker using offset for decentration.
Eliminates fiber rings and prism rings for
decentration. 10”h x 10”w x 15”d (25cm x
25cm x 38cm). 34lb. (15.4kg). 115V, 10A.
WSLOH Alloy Blocker
The Ice 900’s speed and unique features make
it an ideal blocker for both the retail and
wholesale lab enviroment alike.
OWC
Precise, quick and easy blocking of all lenses,
Ice Mini Plus Intelligent Blocker
including single vision, multifocal and proSantinelli
gressive with a maximum capacity of 90 mm.
blanks. The CE9 is constructed of precision
cast aluminum. The unit is designed with oncenter and bifocal blocking and is able to utilize other blocking configurations. Utilizing a
precise, clear scale without looking through
the power of the lens eliminate distortion,
parallax and vertical imbalance. Features
WSLOH blocker is the new manual alloy
maintenance free LED light improved cost
blocker designed to use the loh style blocks
efficiency and light control for optimum visibilor the Accu Block. A proven design, digitally
ity.
control, air operator blocker utilizing a double Contact Santinelli for current pricing.
The Ice Mini Plus Intelligent Blocker from
regulator system to insure proper alloy flow
Santinelli International is an accurate easy
Ice 1000 Bocker
and fill.
and economical choice for blocking lenses.
Santinelli
Features:
The Ice Mini Plus features a 3-pin oscillating
lens stage with lens retaining clamp, which
Standard 58mm x 7mm cooling ring fixed to
allows the operator to perfectly block the lens
the blocker easily adapt to the 48 mm x 10mm
without any chance of lens movement, even
or 65mm x 10mm auxiliary
with the most difficult slab-off lenses.
Both are available with or without cutouts for
The units large 8.4” LCD, color, touch-screen
segs
facilitates easy operation. Traced outline and
Specification:
finished outline of lens are simultaneously
displayed in actual sizes, which is very useful
Width: 9.5” (22.8cm)
in determining if the external outline is suffiDepth: 20.5” (52cm)
cient for the traced outline.
Height: 13” (17kg)
Weight: 38 lbs (17kg)
Electrical: 110 Volt, 10 Amp
WSWB-G Non-Alloy Blocker
OWC
A new non-alloy blocking and deblocking
system featuring the same close tolerance
temperature control and ease of blocking as
our alloy blocker. The new blocker may be
The Ice 1000 Super Intelligent Blocker meets
the demands of the times. In addition to its
blocking functions it can read the perimeter of
a demo lens for rimless drill mounts, create a
hole position, edit shapes and manage data.
The Ice 1000 can do everything necessary for
processing today’s challenging lenses.
Measurement accuracy is at its highest level
with the use of the latest optical cameras.
Lenses with weak power can be measured
properly and progressive lenses can be
detected automatically. Errors caused by prismatic effect are eliminated. The Ice 1000 features a unique lens clamp which secures the
lens automatically. It enables the blocking of
super-hydrophobic lenses without risk of
shifting. The unit’s Integrated Shape Imager
(ISI) accurately and automatically reads the
perimeter of a demo lens. Positions are set on
the touch panel using the super-imposed
demo lens. Setting hole positions is easy, as
images are enlarged on the display. Even firsttime users can easily operate the Ice 1000
The Ice Mini Plus can be directly connected to
a lens edger as a minimum configuration. The
traced data obtained with the built-in tracer of
the LE-9000, Le-1000 and Lex-1000 edgers
are automatically stored into the Ice Mini Plus
internal memory.
Formulated for cleaning all lens surfaces at
de-block wash-up to remove polish residue
and thermoplastic blocking residue “as recommended in Gerber Opticals’ 1997 Step One
Blocking System Reference Guide.” Can be
used with all blocking systems that utilize
thermoplastic blocking compounds. Lenses
rinse sparkling clean, leaving no residual contaminants to interfere with dyeing, coating, or
other down line processes. Cost effective,
less than a penny a lens to prevent rejects and
increase yield. Pump dispenser available for
easy dispensing. Wall mounted pump dispenser available to free-up valuable counter
space.
1-4091-008 8 oz
1-4091-032 Quart
1-4091-128 Gallon
1-4092 Wall Mount Pump Dispenser
Replacement Parts for Shuron 485
A/H, CMV 330, 335 and 336 Alloy
Blockers
Sentilles
Layout Blocker PRA
Satisloh
Well-built equipment lasts with routine maintenance and occasional repairs. Parts available for your Shuron 485 Alloy Blocker and
CMV 300, 335 and 336 Alloy Blockers. Can be
ordered by referencing the part number in
your OEM documentation or by calling for
Prismatic Alloy Blocker blocks up to 120 assistance.
lenses/hr. and processes all materials. New Contact Sentilles for current pricing.
10/12/11 11:19 AM
114
Blockers
Deblockers
Replacement Parts for Shuron/CMV
181 Alloy Blockers
OM-AD Air Wax Deblocker
Pneumatic Deblocker RC
Optical Machinery
OWC
Deblockers
Coburn
Sentilles
This simple, efficient air deblocker separates
wax from both lens and block by placing
blocked lens into the opening and stepping on A very simple to operate device used to sepathe air foot valve.
rate the block, lens and wax wafer cleanly
while greatly reducing lens defects and operaOM-MD Manual Deblocker & OM-Ad tor fatigue.
Well-built equipment lasts with routine maintenance and occasional repairs. Parts available for your Shuron/CMV 181 Alloy Blockers.
Can be ordered by referencing the part number in your OEM documentation or by calling
Designed for metallic blocking system. Simple
but effective method for deblocking lenses.
77-700 (43mm glass), 77-800 (47mm glass),
80228 (55mm glass or plastic), 80229 (65mm
glass or plastic), 80230 (72mm glass or plastic), 645500 & 645600 (replacement O rings).
Air Deblocker for Wax
Optical Machinery
Reconditioned.
Twist Style Deblocker
OWC
Vario Finish Deblocker
for assistance
Sure Speede Adhesive Blocker
Sentilles
Coburn
Designed specifically for the Vario Blocking
System, the Vario Deblocker quickly and safely deblocks the Vario finishing blocks from the
lens.
1088-0050
Deblocker
Optek
This simple, efficient mechanical deblocker
separates the wax from both lens and block.
Simply place the blocked lens into the opening and press the handle. Also available is the
OM-AD Air Deblocker (not pictured) this simple, efficient air deblocker separates wax from
both lens and block by placing blocked lens
into the opening and stepping on the air foot
valve.
3M 16702 Deblocker
OptiSource
Bench-mount unit for deblocking flexi-block
chucks
S95200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $50.00
S95202 Deblocking Plier. . . . . . . . . . . . . . . . . . . $95.00
Hand De-Blocker–Flat
Sentilles
High speed finish layout and adhesive blocking unit features horizontal decentration with
enlarged viewing screen for ease and accuracy in blocking. Eliminates pre-marking of
lens. Binocular viewing eliminates parallax
Heavy-duty precision deblockers are
designed for use in metal blocking systems. A
type when ordering. 16-1/2”h x 8-1/2”w x must for Optek oversize blocking systems.
Provide a quick, easy means of deblocking.
12”d. 16lb. 120VAC, 60Hz, 0.25A.
2000-132 for 43mm glass or plastic; 2110-1
630-0
for 58mm plastic; 2120-1 for 68mm plastic.
and SEG distortion. Specify desired block
Visionix ALB 4000
Finished Lens De-Blocker
Visionix
Optical Machinery
Table Top Deblocking heavy-duty, weighted
deblocking tool,Makes deblocking of most Removes 3M Leap style blocks from edged
lenses with a twist of the wrist. Has 2 size
configurations as EASY as pressing a lever.
08-3m1677U
holes to accept all block styles. Can also be
mounted on end of counter–use 2 screws to
secure. Part #199-1625.
Deblocker Tubes
OWC
Lens Cleaner
Sentilles
Heavy-duty plastic tube provides a fast, simple method of deblocking. Available in 43mm
0007, 55mm 80228, 63mm 80229, 68mm
80230 and 72mm 80231.. . . . . . . . . . $15.00 ea.
The ALB 4000 includes all the traditional fea-
Non-Alloy Deblocker
The deblocker is a simple, efficient mechanical device which separates the wax from both
lens and block. Simply place beveled lens in
cessing a lens. Stored job data can be
opening and press the handle. Available in
sizes to fit all styles of blocks. 6-1/2”h x 6”w x
retrieved and analyzed to improve quality. 16”
Tool designed for deblocking lenses. 50mm or 10-1/2”d (16.5cm x 15.2cm x 26.7cm). 8-1/4lb.
W x 16” D x 23” H, 64 lbs.
58mm.
(3.73kg).
Formulated for cleaning all lens surfaces at
de-block wash-up to remove polish residue
and thermoplastic blocking residue “as recommended in Gerber Opticals’ 1997 Step One
Blocking System Reference Guide.” Can be
used with all blocking systems that utilize
thermoplastic blocking compounds. Lenses
rinse sparkling clean, leaving no residual contaminants to interfere with dyeing, coating, or
other down-line processes. Cost effective,
less than a penny a lens to prevent rejects and
increase yield. Pump dispenser available for
easy dispensing. Wall-mounted pump dispenser available to free-up valuable counter
space. Available in 8 oz., quart and gallon
containers. 1-4091-008 8 oz., 1-4091-032
Quart, 1-4091-128 Gallon, 1-4249 Pump
Dispenser, 1-4092 Wall Mount Pump
Dispenser.
OM-34 Hand De-Blocker
tures necessary in a standard lens blocker but ST-1677U 3M Leap De-Blocker (not shown)
with automation. Using ANSI standards the ST-635 De-Blocker Base
whether the lens is within tolerance. After this
ST-636 AIT Insert
ST-637 ST Insert
verification process the integrated blocking
Manual Deblocker Tube
device automatically orients the chuck to the
Optical Machinery
ALB 4000 analyzes the lens and then indicates
OWC
appropriate cylinder axis and decentration,
and then applies the block. Easy to use touch
screen makes inputs easy and reduces time
cycle. Automatic lens blocking and alignment
feature eliminates the manual steps for pro-
10/12/11 11:19 AM
Deblockers
2005V Premium Deblocking Plier
Western Optical
115
CS-7 Layout Marker
Black Lens Marking Ink
Coburn
OptiSource
Features: For clear, clean and precise marking. Smooth operation lessens operator
fatigue. Infinitely focusing aspheric lens viewer eliminates distortion and parallax for greater accuracy. Large illuminated shadowgraph
screen and grid ensure maximum accuracy in
all aspects of the layout procedure.
Anastigmatically corrected optics greatly
reduce operator eye fatigue and layout errors.
Complete visibility of entire plus-side of a
75mm lens. Decentration of up to 20mm and
seg. heights of up to 15mm above or 20mm
below geometric center. Permits handling of
all large lens shapes on the market today. Soft
lens supports for lens protection. Larger viewing screen and target also make training or
checking of operator accuracy easy. Accurate
visual checks can be made from any viewing
angle. Also available, an optional blocking
adapter for LEAP™ blocks, Coburn, Shuron,
AIT and Standard. 17-3/4”h x 10- 1/2”w x
22-7/8”d. 46lb (20.9 kg). 110V, 50/60Hz.
OptiSource Lens Marking Ink leaves a sharp
impression when used with Lensometers,
Focimeters or Layout Markers. This EASYclean Marking Ink formula keeps markings on
through your processing cycle. No solvent is
necessary for removal.
# 71027
Phantom
Remove a Weco, Briot or Nidex style finishing
block without scratching the lens. Suitable for
most metal, rubber and plastic finishing
blocks 15mm in diameter. Has adjustment
screw to perfectly size to the block.
2005v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $28.00
2006F Deblocking Plier for Briot
Axcell
Western Optical
Can also be used as a safe solvent on many
subtrates such as polycarbonate, acrylic,
metal, ceramic, and glass, to remove stains,
marker ink, and paint without damaging the
surface.
Designed with Briot to match the Axcell style
magnetic chuck pads. Securely grips the circumference of the plastic portion of the block
without touching the magnetic cap. Fits all
blocks with a diameter of 15mm.
2006F
Foam Grip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $29.00
4068 Deblocking Tool
Black Pen for AR Coatings
OptiSource
4875-03
MSDS.
This Lens Marking Pen is used for AR coatings It can EASILY be distinguished from the
non-AR coating pens, by the outlined letter
“F” and the permanent SPECIAL text. These
Layout Ink
quart sizes.
fine-point Lens Marking Pens make lens
Coburn
marking a cinch. The Lens Marking Pen is also
Ink Removal pen
A high-quality, waterproof ink recommended waterproof. *Can EASILY be removed with
for marking lenses for layout. Red 3/8oz. tube. ALL OFF or Alcohol. SAVE time and order both
Vigor Optical
now!
10915-00
Western Optical
Layout Ink
Coburn
Remove lens block quickly and safely. For use
with 3M LEAP AIT, Coburn, SemiTech and
Shuron blocks. Use hand held or mounted to
countertop. Aluminum construction.
Quick, efficient removal of progressive mark4068 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.00
ings from lenses, Ultimate Control, No Messy
Solution, Poly Safe, Acetone Free, Instantly
Mark Removers
Dissolves All Ink Markings Lasts for approximately 100 lenses
BPI® ID Tech™
99-OSMIB
55-319F-9
Black Pen for Non-AR Coatings
OptiSource
Water-soluble. An easily removable, Orange
ink. 8oz.
19909-30
OM-61 Geo-Center Marker
Optical Machinery
83.405P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $16.00
BPI
Markers
SLM-501 Marker Blocker
A.I.T. Industries
This Lens Marking Pen is used for non-AR
coatings. It can EASILY be distinguished from
the non-AR coating pens, by the outlined letter “S” and the “permanent dry safe” text.
These fine-point Lens Marking Pens make
lens marking a cinch. The Lens Marking Pen is
also waterproof. *Can EASILY be removed
Dots center of convex side of lens clearly, with ALL OFF or Alcohol. SAVE time and order
quickly, accurately. Locates center of various both now!
sizes of lens blanks.
55-313-9
For Lens Inspection and Progressive Lens
Mark Identification System. It is small, light
weight and uses very little electrical power.
Black China Marker
Blue China Marker
OptiSource
OptiSource
# 18301 110v
# 218301 220v
BPI
The SLM-501 provides hands-free, high speed
marking or blocking. Eliminates marking completely, if desired. Marks thin, distinctive,
straight lines. Illuminates segs clearly, even on
dark-tinted lenses. Provides quick-set
mechanical movement for decentering. Hands
are free to hold the lens while it is marked or
blocked. When there is no radical decentering, hands are totally free. Size: 6-1/2”w x
17”h x 20-1/2d. Weight: 39lb. Electrical: 120V,
60Hz x 1.5A. Other voltages available.
Quickly remove the marks from a progressive A00501N
lens! The fiber tip incorporates a valve that Contact A.I.T. Industries for current pricing.
These must-have grease pencil markers will These must-have grease pencil markers will
mark most lens surfaces and will remove eas- mark most lens surfaces and will remove easily. Available in 5 vibrant colors.
ily. Available in 5 vibrant colors
99-CHINABLCK-1
99-CHINABLUE-1
Black China Marker Box of 12
Blue China Marker Box of 12
99-CHINABLCK-12
99-CHINABLUE-12
10/12/11 11:19 AM
116
Red Pen for AR Coatings
Yellow Lens Marking Ink
OptiSource
OptiSource
Markers
Blue Lens Marking Ink
OptiSource
Hydro Ink, which sticks to slick lens coatings
without smudging or wiping off. This red ink
leaves extremely sharp impressions and will
stay on the lensmeter pad for a long time.
Markings are easily removed with PSI’s Quick
Clear Ink Remover and Solvent.
H160 2 oz. bottle
True Mark Lens Ink
PSI
99-OSMIBL
Poly Edge Gaze Pen
OptiSource
This Lens Marking Pen is used for AR coatings. It can EASILY be distinguished from the
non-AR coating pens, by the outlined letter
“F” and the “permanent SPECIAL” text. These
fine-point Lens Marking Pens make lens
marking a cinch. The Lens Marking Pen is also
waterproof. *Can EASILY be removed with
ALL OFF or Alcohol. SAVE time and order both
now!
99-OSMIY
WAIT 501 Layout Marker
OWC
55-319F-2
Red Pen for Non-AR Coatings
Now available in 4 colors: red, black, white
and yellow. True Mark Lens Inks are easy to
use and water soluble. Ideal for lensometers,
focimeters and layout markers. Does not cake
and remains moist on the pad. No solvents are
required to remove ink.
130 Yellow
150 Black
160 Red
170 White
OptiSource
A user-friendly, highly accurate marker
designed through automation (motorized
cycle) with push button or foot switch operation. 8”w x 21”d x 18”h. 39lbs. 110V/1.5 Amp.
“Suremark” Marking Ink
Sentilles
WCS-7 RC Layout Marker
The new Poly Edge Glaze Pen from OptiSource
makes it easier than ever to produce a brilliant
polished edge on polycarbonate lenses without any machinery, tools, or training. Filled
with a special chemical solution, the pen
eliminates damage associated with burning
lenses during the buffing or edging processes.
The pen works in three seconds, saving time
while helping prevent major errors.
99-PEGP
Red China Marker
OptiSource
OWC
This Lens Marking Pen is used for non-AR
coatings. It can EASILY be distinguished from
the non-AR coating pens, by the outlined letter “S” and the “permanent dry safe” text.
These fine-point Lens Marking Pens make
lens marking a cinch. The Lens Marking Pen is
also waterproof. *Can EASILY be removed
with ALL OFF or Alcohol. SAVE time and order
both now!
55-313-2
White China Marker
OptiSource
A water-soluble, highly visible marking ink.
Works equally well on all lens surfaces.
Available in bright Yellow or Red. Sold in 4oz.
plastic bottles with dispensing top. 01-23372.
Larger viewing area for greater accuracy in
layout. Marking head swings to the side for
easier operator access. 19”h x 11-1/2”w x
23”d (42cm x 29cm x 58cm). 40lbs (19kg).
115V, 3A.
Bulbs for Finishing Markers
Sentilles
Etching Mask Kit
Precision Tool
These must-have grease pencil markers will
mark most lens surfaces and will remove easThese must-have grease pencil markers will
ily. Available in 5 vibrant colors
mark most lens surfaces and will remove eas99-CHINARED-1
ily. Available in 5 vibrant colors.
Red China Marker Box of 12
99-CHINARED-12
Red Lens Marking Ink
OptiSource
Bulbs for finishing markers. Reference OEM
listed below:
99-CHINAWHTE-1
White China Marker Box of 12
99-CHINAWHTE-12
Yellow China Marker
OptiSource
The Lens Etching Mask Kit allows you to mark
your lenses with your company’s logo for all
your prescription safety eyewear. Comes
complete with 6 logos in their self-storing
stand. Simple to use and very cost effective.
149-6815 CMV 320 Marker Bulb
149-6815 Shuron/CMV 149 Marker Bulb
18200-041 AO 18200 Marker Bulb
Bulbs for Layout Markers
Sentilles
True Mark Hydro Ink (Hydrophobic
Lens Marking Ink)
PSI
These must-have grease pencil markers will
mark most lens surfaces and will remove easily. Available in 5 vibrant colors.
99-OSMIR
99-CHINAYLLW-12
99-CHINAYLLW-1
Yellow China Marker Box of 12
Bulbs for layout markers by referencing OEM
listed.
Today’s slick coatings make marking lenses a
real challenge. PSI now offers True Mark
149-6815 CMV 320 Marker Bulb
149-6815 Shuron/CMV 149 Marker Bulb
18200-041 AO 18200 Marker Bulb
18200-041 AO 18440 Deluxe Bulb
10/12/11 11:19 AM
Markers
117
Suremark Marking Ink
SLM-501 Marker Blocker
Finish Block Adapters
Sentilles
A.I.T. Industries
Optical Machinery
Marker Accessories
Sentilles
Provides water-soluble, high-visibility marking The SLM-501 provides hands-free, high speed
and is available in bright Yellow or Red. Plastic marking or blocking. Eliminates marking combottle with dispenser top contains 4oz.
pletely, if desired. Marks thin, distinctive,
Quality replacement parts for AIT, AO, CMV,
straight lines. Illuminates segs clearly, even on
Shuron and TMI equipment used in the indusQuantity discounts available.
try. Refer to OEM manual. Call for assistance,
dark-tinted lenses. Provides quick-set
current price and availability. 149-6849: ink
AR Lens markers
mechanical movement for decentering. Hands
pad (round), 149/320 Shuron/CMV Marker.
are free to hold the lens while it is marked or
Vigor Optical
18200-024: ink pad (round), AO 18200 Project
blocked. When there is no radical decenterO Marker. 18440-017: ink pad (oblong), AO
18440 Deluxe Marker. 501-1820: ink pad
ing, hands are totally free. Size: 6-1/2”w x
(round/square), 501 AIT Marker. 149-2464: line
17”h x 20-1/2d. Weight: 39lb. Electrical: 120V,
stamp, 149-320 Shuron/CMV Marker. 1820060Hz x 1.5A. Other voltages available.
024: line stamp, AO 18200 Project O Marker.
A00501N
18440-017: line stamp, AO 18440 Deluxe
Marker.
Finish Block Adapters for AIT.
ST-630-01W AIT Speede Blocker Insert Adapter
ST-630-02W WECO Speede Blocker Insert
ST-630-02W-O Replacement O-ring for above -02
ST-630-AD/AIT AIT Squeeze Block Adapter
OM-CS7-RB Rebuilt CS-7 Layout
Marker
Optical Machinery
MARKING INK WATERPROOFSUREMARK
Accu-Block Layout Blocker
Finepoint • Two colors: Red & Black • Smudge
Proof
Sentilles
Safe for A/R coated lenses
44204
black. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.75 dozen
black. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.00 ea
44205
red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.75 dozen
red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.00 ea
Black Marking Ink
Vigor Optical
MARKING INK WATERPROOF- SUREMARK
A high-visibility Waterproof marking ink
Available in bright Yellow, Red, Black or White
in a 2 oz squirt bottle or 4 oz plastic bottle.
Markings are easily removed with SOS Sure
Clear Ink Remover, Packaged In 8 oz spray
bottle.
1-2322
Waterproof Ink, Yellow, 2 oz or 4 oz.
1-2323
Waterproof Ink, Red, 2 oz or 4 oz.
1-2324
Waterproof Ink, Black, 2 oz or 4 oz.
1-2325
Waterproof Ink, White, 2 oz or 4 oz
1-23250-08
Ink Remover, Clear, 8 oz Spray Bottle
1-2322
1-2323
1-2324
1-2325
1-23250-08
Belrose
Rebuilt version of the Coburn CS-7 Blocker /
Marker; smooth operation lessens operator
fatigue; infinitely focusing aspheric lens viewer eliminates distortion and parallax for accuracy; large shadow graph screen and grid
ensure max accuracy in all aspects of layout
procedure; decentration of 20mm and seg
heights of 15mm above and 20mm below
geometric center; soft lens supports for lens
protection; available with various blocking
adapters and configurations. 110 volt; 46 lbs.
Features an enlarged vision screen for easy
Optional Accessories: 4775 ST Block; 4779
viewing and blocking. Has excellent projec- Adapter ST; 4899 WECO Adapter; 4900 WECO
tion brightness, with improved accuracy and Adapter Ass’y.
ease. Illumination brightness can be adjusted
Align-A-Lens II
ments for horizontal and vertical alignments.
OWC
Unit comes with two different layout scales.
Recommended for use in Lens Markers.
Shipped with your choice of the following
Waterproof. 1qt. bottle: 2lbs. 7oz, 1oz. bottle:
block adapters: AIT, A/O (DAC. Vision), WECO,
3oz. shipping weight.
COBURN, and Shuron. Other block adapters
84.300 quart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $85.00
84.301 ounce . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.00
available on request. Credit cards accepted.
Specs: 16-3/4”h x 8-3/8”w x 12-3/4”d. 120V,
Markers and Blockers
50/60Hz.. . . . . . . . . . . . . . . . . . . . . . . . . $950.00
AIT-501 Surface Layout / Finish
All New Speede Blocker
Blocker
A.I.T. Industries
Optical Machinery
A projection layout blocker which uses the
OMI or the 3M LEAP™ blocking system for
bifocals and single vision lenses. Both the
bifocal and the marked optical center of a
single vision lens are clearly visible on the
viewing screen. A layout grid enables the lens
to be centered and decentered horizontally
and vertically without any parallax and then
blocked within five seconds.
M045
Replacement Parts for Shuron/CMV
149 & 320 Markers
Sentilles
continuously. Also includes separate adjust-
PSI
The All New Speede Blocker has set the standard for high-speed finish layout and adhesive
blocking. New features include horizontal
decentration and enlarged vision screen for
viewing and blocking; unique horizontal and
vertical alignment adjustments; adaptors
available for all blocking systems. Eliminates
layout marking. Eliminates parallax and seg
distortion with binocular reflection viewing.
Fast lever motion presses block exactly on
target. 16-1/2”h x 8-1/2”w x 12”d. 16lb. 120V,
60Hz, 0.25A (other voltages available).
The 501 provides hands-free mark-up or
blocking with footswitch; illuminates segs
clearly, even dark-tinted lenses; marks thin,
distinctive line in marking configuration; can
be fitted with a blocking adapter to use LEAP
style blocks for finish operations. 110 volt,
39lbs. Also available: AIT-01702 AIT Base
Maintenance and repair keep markers in
accurate working condition. Parts available
for your Shuron/CMV 149 & 320 Markers by
referencing your OEM manual’s part number
01001
or call for assistance.
3M Blue Chip Lens Protectors are used in
Block Adapter; AIT-01704 AO/SE Block conjuction with blocking pads to prevent the
Adapter; AIT-01708 Coburn Block Adapter; lens from slipping. Reduces lens surface
AIT-07155 Weco Block Adapter; AIT-20346 scratching during finishing and deblocking.
Marking Rubber; AIT-43523 Replacement Each chip is tabbed for easy removal. 33mm,
pre-cut. 2,000 per roll.
Light Bulb.
1647
10/12/11 11:19 AM
118
Markers and Blockers
Blocks
PSI
listed: 8261-L-41 Novamatic 8261 Novascope
Bulb; 045-50455 OMI 045 Align-A-Lens Bulb;
1-1029765B Dimelp Marker-Blocker Bulb;
199-1600 3M 199 LEAP™ Blocker Bulb; 50143541 AIT 501 Marker-Blocker Bulb; 50143541 AIT 530 Speede Blocker Bulb; X638613 CMV/Silor X63 Bulb Upper; X63-7591
CMV/Silor X63 Quartz Bulb.
Surescope Layout Blocker - Marker
Sentilles
Edger Blocks available for AIT, Shuron,
SemiTech and Coburn machines. Low base
blocks are less than 4 base front curve. High
base blocks have an 11-14 base front curve.
1/2 Eye Blocks also available
PSI
Coburn
03-V83-107
OptiSource
Plastic Pattern Blanks
DAC Vision
Simple to use and highly accurate. Mirror
projects a parallax-free, super bright image on
Multifocal and progressive lenses as well as
single vision. Also projects of on-size pattern
Blank to tell you lens size needed. Two sepaContact DAC Vision for current pricing.
rate arms one for marking, one for blocking. Quantity discounts available.
AIT adaptor is standard, other block adaptors
Beige Pattern Blanks w/ Black Line
available . 115V 50/60HZ Weight: 15 lbs.
PART# 7991 Surescope Blocker -Marker - (specify
block used)
edger that uses patterns. Simply cut to size,
and watch it work. Size: (80 x 65 mm).
Novamatic Style: 80201 2” x 2” (5cm x 6.4cm), Contact OptiSource for current pricing.
regular; 80202 2-1/2” x 3-1/8” (6.4cm x 7.9cm),
White Pattern Blanks w/ Embossed
oversize. Weco Style: 5007-1014 2-3/4” x
2-3/4” (7cm x 7cm), oversize.
Lines
ST-104 Novamatic, WECO, Hoya;2-1/2” x
3-1/8”; 0.063” thick. ST-106 Novamatic,
Hoya;1-3/4” x 2-1/4”; 0.063” thick. ST-109
WECO; 2-1/2” x 3”; 0.100” thick. ST-109C
WECO (Clear). ST-110 2-1/2” x 3-1/8”; 0.100”
thick. ST-124 Mars; 2-1/2” x 2-11/16”. P-61
Grid belt; XL-120J Santinelli jumbo.
LenSaver Dots
Lens Pattern Blanks
OptiSource
OptiSource’s Universal Pattern Blanks are the
easiest pattern blanks you’ll ever work with.
These White Pattern Blanks with Embossed
Lines incorporate raised grids on one side and
engraved grids on the other. The Pattern
Blank’s semi-rigid material makes for efficient
cutting on any brand of machinery, or by
hand. Size: (80 x 60 mm).
99-PBW
Pattern Blank 80 x 65
Red Lensometer Ink
OWC
Vigor Optical
PSI LenSaver Dots are an economical way to
prevent damage from the edger chuck as well
as slippage and scratches during finishing
and deblocking. LenSaver Dots are transparent so layout markings are visible underneath.
Double tabbed for quick and easy removal.
LenSaver Dots have been tested and proven
to stick to even the slickest lens coatings.
Available in standard 35mm round style and
25mm x 35mm oval shape which won’t interfere with edger probes. Comes in rolls of 500
High quality red waterproof ink recommended
or 2,000 in clear, blue, red or green.
for use in all lens markers or lensometers. 1oz
bottle with twist off applicator cap . . . . .$7.00
Blocks Half Eye
Sentilles
Pattern Blanks
These Beige Pattern Blanks with Embossed
Large rigid pattern blanks for use on autohand. Size: (80 x 60 mm).
99-PBB
matic pattern makers or cut with shears.
Beige Pattern Blanks w/ Embossed
Lines
OptiSource
Pattern Blanks
Phantom
Belrose Pattern Blanks
Belrose
Blocks for edging Half Eyes or small lenses
are available for most block styles, accepted
by various edger chucks in the industry. If Half
Eye block you require is not listed call for
assistance. Half Eye blocks are available for:
AIT, OMI 2 key, Semi-Tech, Shuron, Silor
Posiblock, Weco Vario, Santinelli and Coburn.
All styles are available in: Hard or Flexible
Resin. Metal blocks are available for: AIT,
Semi-Tech, Shuron and Coburn. Half Eye
blocking pads are also available to accomodate the Half Eye blocks for a more accurate
and better bevel placement without being
influenced in edging operation. Half Eye
blocking tabs are rectangle w/tab. 199-0742
1000 roll. 199-0741 2000 roll
Superior quality pattern blanks for use on all
manual and automatic pattern makers.
Numbered grid on the flat side. Size: 80mm x
65mm. Credit cards accepted.
Per hundred . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.50
Giant Patterns
BPI
These Beige Pattern Blanks with Embossed
hand. Size: (80 x 60 mm).
99-PB
Superior quality pattern blanks for use on
automatic pattern makers. Available in White
with Black millimeter grid markings.
Pattern Blanks
PSI
Green Pattern Blanks
OptiSource
Bulbs for Marker/Blockers
Sentilles
Our 64mm x 70mm patterns are easy to use
and fit most automatic pattern-making
machines. Special material reduces heat build
up on cutting tools for cleaner edges. They
feature millimeter markings and tapered holes
for a firm grip in the edger. Shipping weight After years of experience, OptiSource has
3lb (1.3kg). 80202 pkg. of 100. Handcut pat- learned that industry professionals love the
Green Jumbo Pattern blanks because they are
terns also available
EASY to cut straight, and the embossed mea80200 Yellow
suring lines allow for EASY size matching.
Bulbs for marker/blockers. Reference OEM 80202 White
Green Jumbo Pattern Blanks perform on any
manual or call for assistance. Popular bulbs Contact BPI for current pricing.
Pattern Blanks, 80mm x 65mm, are oversized
to handle any lens. They are rigid, yet soft
enough to be cut with standard household
shears. The material is long lasting and will
stand up to your edgers. Quantity discounts
available. 1300 Tan. 1330 Blue-Santinelli
Blanks. LP-5-50 Clear Pattern Blanks.
10/12/11 11:19 AM
Pattern Blanks
Accessories for WECO 430 Pattern
Maker
Sentilles
430-3132-0202: Timing Belt (was 50433) Coburn/Weco. 430-1007-3056: Cutter Punch
(was 50434) - Coburn/Weco. 430-3105-0212:
Spring for Cutter Punch - Coburn/Weco.
4001 pkg. 100, Facilitates tracing of lens or eyewire
from a paper pattern. . . . . . . . . . . . . . . . . . . . . . $20.00
Clear Styrene Oversize
4000 pkg. 100, Facilitates tracing of lens or eyewire
from a paper pattern. . . . . . . . . . . . . . . . . . . . . . $20.00
Industrial Strength Oversize
4002 pkg. 100, Natural color virgin ABS plastic.
Recommended for edgers with heavy head pressure
or when patterns will be used repeatedly.. . . . . $20.00
Original Material Large
4004 pkg. 100, Virgin high impact styrene. When used
on edgers with normal head pressure patterns will not
crush or bend. . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
Original Material Oversize
4006 pkg. 100, Virgin high impact styrene. When used
on edgers with normal head pressure patterns will not
crush or bend. . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
Pattern Gauges
Lens Pattern Cutters
Sentilles
Power: 115V, 4A, 60Hz, 1˜
Reclaim Tank Basket/Tray
Optek
Simple to use. Produces an on-size, on-axis
pattern for the frame. Choice of frame tracers,
including a roller tracer for eyewear with soft
inner lining. Cuts pattern in 30 seconds. 12”h
x 8.5”w x 6.5”d. 110V.
8061
Reclaim Tanks
ST-343 cutter for Novamatic Pattern Maker
Weight: 10 lbs
Optical Machinery
Pattern Blanks
Vigor Optical
Pattern Maker– Sureshape
119
Additional basket trays for the 210 reclaim
tank will speed up the alloy recovery time.
These heavy-duty, all stainless steel baskets
are shaped in such a way that the blocks can
be removed from the tank after the alloy is
reclaimed nearly dry. Capacity for optimum
reclaim speed and drainage is 34 blocks per
basket.
2100-14
OM-30 RCT
Reclaim Tanks
Optical Machinery
Coburn
Pattern Makers
Hoya PM-5 Automatic Pattern Maker
OWC
Alloy reclaim tank designed for speed and
convenience. Over-ride timer gives added
heat when needed, to melt alloy after preset
temperature is reached. Unique flow spout
Melted metal from used blocks is collected shuts off at tank so no external heat is needand channeled into a sump at the bottom of ed. Stainless steel tank.
each tank. It may then be drawn off into suit- Contact Optical Machinery for current pricing.
able containers for re-use in blockers.
Automated Reclaim System
Stainless steel lid liner. Accessible thermostat
control.
OWC
The 83.108 new patterns are designed for use
with automatic pattern makers. No hub allows
for smaller eye sizes. centering holes. 60mm x
70mm. transparent. 100 per bag. $ 28.00 per
bag
The Vigor traditional blanks 83.107 are 50 per
bag and are green with black sizing grid. 1/16’
thich and a reinforcing hub. Size; 80mm x Quick and precise tracing for accurate frame 99-SD 18-3/4” x 15” x 18” (47.6cm x 38.1cm x
shapes and patterns. A constant-pressure 45.7cm). 40lb (18kg). 115V AC, 10A.
65mm. $30.00 per bag.
spring mechanism is incorporated to maintain Contact Coburn for current pricing.
Pattern Blanks
the tracing pressure at a constant level
Alloy Reclaim Tank
Western Optical
regardless of frame size. The removal and
Optek
replacement of the frame table is not required,
making speedier dispensing work possible.
29cm h x 21.5cm w x 34cm l. 8.5kg. 110V; 2A.
Easily processes 200 blocks/hour. Precision
digital temperature control. High quality construction, stainless steel tank and mechanics.
Low pressure air and mechanical agitation to
facilitate block cleaning process. Variable
cycle length control.
Accessories for Pattern Makers
(P-Models)
Sentilles
For all makes of automatic and manual pattern makers. Available in three types of quality
virgin material and in two sizes. All patterns
have raised millimeter markings. Materials can
be cut clean by pattern maker cutting blade,
router blade or by using hand sheers. Large:
63mm x 54mm x1.65mm
Oversize: 80mm x 65mm x 1.65mm
Clear Styrene – Large / Oversize
Facilitates tracing of lens or eyewire from a
paper pattern.
#4000 Oversize $18.00 (pkg. 100)
#4001 Large $18.00 (pkg. 100)
Industrial Strength – Large / Oversize
Unique design of this reclaim unit allows alloy
Lenswasher RC
to be reclaimed quickly in upper section of
OWC
tank then fall to storage area where it is maintained at a temperature ready to go directly
into the blocker. Special valve designed exclusively for alloy. Tank and trays are all stainless
steel. Capacity 34 blocks per tray. Alloy
capacity 50lb (22.5kg). Unique tray shape
drains hot water from blocks. Average reclaim
cycle 2 minutes. 16”h x 14”w x 18”d (40.6cm x
Action, Briot, DAC, Novamatic, Nu-Tec, Opti- 35.5cm x 45.7cm). 50lb (22.5kg). 115V, 10A,
Vue, PSI, Tcubomatic, etc. 01-8061-P-1: 60Hz; 230V, 5A, 50Hz.
Cutter Assemble–for all brands listed above. Contact Optek for current pricing.
Utilizes heated and pressurized water to pro01-8061-P-61: Belt for Pattern Maker–for all
Icarus
vide a labor saving method of removing blockbrands listed above.
Optek
ing wax and processing residue from surfaced
lenses or surfacing blocks.
Belts for Pattern Makers
Reconditioned.
Sentilles
Natural color virgin ABS plastic. For edgers
with heavy head pressure or for patterns that
will be used repeatedly.
Reclaim Tank
OWC
#4002 Oversize $18.00 (pkg. 100)
#4003 Large $18.00 (pkg 100)
Original Material – Large / Oversize
White virgin, high impact styrene. Will not
crush or bend when used on edgers with
normal head pressure.
#4004 Large $18.00 (pkg. 100)
#4006 Oversize $18.00 (pkg. 100)
4003 pkg. 100, Natural color virgin ABS plastic. For
edgers with
heavy head pressure or for patterns that will be used
repeatedly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
Clear Styrene Large
Belts to keep your pattern maker going.
Specify part number from OEM manual or call
for assistance. Popular models listed: 31320202 WECO 430 Timing Belt; 430-50433
WECO 430 Timing Belt; 8061-P-61 Novamatic
PM 4/7 Round Belt.
The Icarus Block Cleaning Cell is designed for
use with Optek wax blocking systems. It uses
an efficient heated ultrasonic action to effectively remove wax residue from blocks. Key
feature include: High efficiency heated ultrasonic action; Quick and easy one-step operation; Cleans up to twenty-seven blocks per
fifteen minute cycle; Stainless steel cleans
easily and resists corrosion; Convenient rear
mounted drain tube
Size: 12.5” W • 7” D • 13” H
Stainless steel tank and tray. Large capacity
with easy flow spout. Available with quick
heat-up timer. 18”h x 18-3/4”w x 15”d (46cm x
47cm x 38cm). 42lb. 115V, 12A. Other voltages
available.
10/12/11 11:19 AM
120
Reclaim Tanks
W99LD RC Large Alloy Reclaim Tank
W99SD RC Alloy Reclaim Tank
Alloy Deblocking Reclaim Tank
OWC
OWC
Satisloh
Space Saver Reclaim Tank
OWC
Reclaim tank with swing drain channel and
immersed valve. Thermostat controlled heater. 18”h x 18-3/4”w x 15”d (45.7cm x 47.7cm x
38cm). 40 lbs (18 kg). 115V, 10A.
Large alloy reclaim with stainless steel tank
and lid, thermostat controlled heater with
swing out channel to drain. 18”h x 24”w x
18-1/2”d (45.5cm x 61cm x 47cm). 90 lbs (40.8
Compact design. Accommodates 15 large kg). 115V, 12A.
blocks. All stainless steel interior. 12”h x 15”w Contact OWC for current pricing.
x 11”d (30.5cm x 38.1cm x 28cm). 25lb
(11.4kg). 110V, 7A.
The unique design of this unit allows alloy to
be reclaimed quickly and efficiently. Accurate
temperature settings to accommodate all
commercially available alloys. Entire unit constructed of stainless steel, including the
removable tool basket. 208mm x 520mm x
350mm. 20kg. 208/220V, single phase,
50/60Hz.
10/12/11 11:19 AM
SURFACERS
Cylinder & Sphere Surfacers &
Polishers
121
OM-506-RB Cylinder Surfacer-Rebuilt
506RB Cylinder Surfacer
OWC Surfacer 432V
Optical Machinery
OWC
OWC
Acuity Plus Finer/Polisher
Coburn
Fast, versatile, and accurate. Precisely controlled air spindle pressure for surfacing glass,
CR-39®-type, polycarb, and high index. 4
spindles, each pair a self-contained unit. Each
unit may be operated independently. Bearings
and moving parts isolated from abrasive slurry
penetration. Two-speed versatility. OM-505RB Cylinder surfacer–same as above, except
with 2 spindles. Requires compressed air.
230VAC, 60Hz, 15A.
The Acuity Plus Finer/Polisher is an economical way to achieve high quality lenses
automatically. Sophisticated microprocessor
programming automatically selects the best
processing times and pressures for all lens
materials including CR39, polycarbonate, hiindex and glass. The Acuity Plus can handle a
wide curve range as well as the diamond fining process for glass. Excellent results are Contact Optical Machinery for current pricing.
achieved with either a one-step or two-step
5052B Twin Bowl Cylinder Surfacer
fining process. The need for minor stroke
adjustments is eliminated. The Acuity Plus
OWC
requires no special training, a LCD guides
operators through each step in plain English
(other languages are available). Cycle times
are shortened with FasStart which automatically clamps lenses and laps in place when
the cycle is engaged. 54”h x 18”w x 29”d.
250lb. 230V, 50/60Hz, 6A, single phase. Air
50PSI.
4 patented perpendicular motions. 3 variable
Four spindles in two self-contained bowls. speeds - main spindle, side-to-side, in and
Two-speed motor with digital timer makes it out. User adjustable strokes - side-to-side
an ideal machine for surfacing glass or plastic. and in and out while running. Dual digital
timer. Strokes from 22mm - 44mm to 34mm 55”h x 41”w x 30”d (138cm x 104cm x 76cm). 78mm. 23”w x 30”d x 56”h. 500lbs. 110V/60
750lb (338 kg). 220V AC, 60Hz, 1 phase, 10A. cycle/12 amp.
Other voltages available.
OWC
The Acuity Surfacer has brought the traditional finer/publisher a new level of perfor-
Coburn
mance and flexibility. Utilizing the on-board
Twin bowl 505. Separate bowls and pumps for
user programmable controls, the operator can
fining and polishing in a small area. 23”h x
easily adjust any fining or polishing parameter
21”w x 23”d (58cm x 53.2cm x 58cm). 290lb
to exactly match the material and job at hand.
(131kg). 115V, 60 cyl., 1Ph. 10A.
Unique (i.e. CR, poly Hi-index etc.) are easily
OWC
The Multi-Axis Adaptive Technology (MAAT)
sub-aperture polisher works seamlessly with
the DTL, the affordable, high-performance
dry-cut lens generator series from Coburn.
Together, these robust systems process traditional and backside complex curves in any
lens material, quickly and accurately. This
unique polisher precisely positions and orients the lens in five degrees of freedom, while
the sixth degree controls the pressure applied
to the lens during the polishing process. The
high-speed spindle, rotating at speeds
between 1,000 to 2,000 rpm, expedites the
material removal process. Combining the six
degrees of control with the high-speed spindle rotation results in a high quality, uniformly
polished lens in less time than conventional
fining and polishing methods. The sub-aperture polishing system eliminates traditional
lap inventory and management. The MAAT
system, whether manual or automated, will
deliver a superior lens finish.
Power:
230V, 50/60 Hz with ground
OWC
Acuity Surfacer
MAAT100 SUB-APERTURE POLISHER
Toric Surfacer
Internal programmable controller greatly
increases this unit’s ease of operation.
Automatically clamps and starts the pre-set
fining or polishing cycle time with one push of
a button. Operator efficiency and accuracy is
greatly increased, as the number of repetitious actions are greatly reduced. A very
robust and optically accurate mechanical
design enhances unit reliable and lens quality
dramatically. Unique and nearly infinitely
adjustable orbit and stroke.
selected form the operations screen once the Specification:
lens and the tools are loaded, the process is Width: 22”
initiated with the press of single button.
Theses process enhancements greatly reduce
spoilage and operator fatigue. This unit also
Depth: 22.75
Height: 51”
can be configured to minimize polish waste by Weight: 510 lbs
Electrical: 230 VAC, 60 HZ, 1 PH (Domestic)
timing the polish flow shut-off.
Intel air 70 psi (Minimum) 150 psi (Maximum)
Specification:
Width: 18’’ (45.7 cm)
Depth: 30” (76.2 cm)
Two-spindle, stainless steel bowl with air-lap
tables. Features include: adjustable stroke
and timing belt drive, digital timer and adjustable slurry system. 51”h x 20”w x 26”d
(66.1cm x 51cm x 64cm). 365lb (174.6kg).
220V, 60Hz, 1 phase, 6A. Other voltages available.
W5000 RC Cylinder Surfacer
OWC
Height: 54” (137.2 cm)
Weight: 250 lbs (113.4 kg)
Electrical: 230 VAC, 60 HZ 1PH (domestic)
Inlet Air 70 psi (3.45 bars) Minimum, 125 psi
(8.62 bars) Maximum
CMA Finer Polisher
OWC
OWC
Dual timers, air clamping, and air lap tables
are standard features on this floor model
machine. 60”h x 20.5”w x 25.7”d (152cm x
52cm x 65cm). 375lbs (170kg). 220V, 60Hz, 7A.
OM-505 Surfacer-2 Spindle-Rebuilt
W5004 RC Cylinder Surfacer
Optical Machinery
OWC
Large stainless steel slurry bowl, fast and
easy stroke adjustment, dual timers all includ-
The 505-rebuilt machines are table top surfacing machines; can be configured for fining or
polishing and the machines can be plumbed
for a variety of slurry needs for fining or polishing. 115 volt,15 amp; 50 psi; 300 lbs.
Bench model, two-spindle unit. Features
include: digital timer, dual-speed motor, and
full one-year warranty. 23”h x 21”w x 23”d
(58cm x 53.2cm x 58cm). 280lb (126kg). 115V
AC, 60 cyl, 1 phase, 10A. Other voltages available.
121-125_SF1110_Surfacers.indd 121
ed in a patented three perpendicular motions
machine with positive axis control. 51”h x
19”w x 24”d (129.5cm x 40.2cm x 61cm). Space saving stacked design. Top two spindles for polishing, bottom for fining. 69-1/2”h
390lb (178kg). 110V, 60 cyl, 9A. Other voltages
x 24”w x 31-1/2”d. (177cm x 61cm x 80cm).
available.
655lbs (302kg). 220V, 60Hz, 15A.
10/12/11 11:20 AM
122
SURFACERS
Cylinder & Sphere Surfacers &
Polishers
Baffle Replacements for Sphere and
Cylinder Surfacers
Sentilles
61184 10A 220V, Fuse
70354 For upper motion drive #45320, Bearing, Thrust
Washer
Washer
Needle
9421 Panel-start/run, Switch
Replacement Parts for Shuron/CMV/
TMI Cylinder Surfacers 88, 340, 488,
8220, 8520
Sentilles
- Slurry system accommodates either standalone or central slurry operation with hookups
at the rear of the unit - Slurry pump is located
remotely from the bowl to avoid overheating
the slurry - Extended life bearings feature a
special reservoir for adding additional lubricant - Enclosure is constructed of heavy duty
16 gauge sheet metal — no injection molded
plastic - Orbit and sweep range adjustments
are made internally to prevent accidental
resetting - Full range of sphere and cylinder
curves without the use of adapters - Capable
of both plus and minus surface processing
FPZ-2 Finer Polisher
OWC
Specifications
FPZ-2 Finer Polisher- Dual Bowl. Fast, easily
adjustable strokes from 23 mm x 58mm to
35mm x 71mm. Dual timer, dual speed.
Weight: 375 lbs
Stainless steel bowl. Compact design requirPower: 120V, 13A, 60Hz, 1~ (other voltages ing minimum floor space. Easy to load and
operate. Self-contained slurry system, one for
available)
fining and one for polishing.
80 psi (min) air source
Weight: 400lbs (181 kg)
Size: 21” W • 30.5” D • 54.75” H
We stock and supply a wide variety of baffles
and boot for many sphere surfacers and cylinder surfacers. Shown are #45069 upper,
#45076 lower baffles for Shuron/CMV cylinder
surfacers 88, 340, 488, 8220, 8520, 9520.
Others available: ICM-II 201 04019 Bellowssmall, 201 05028 Bellowslarge. Boots upper
and lower for Shuron 252 and CMV 341-342
are #8772 boots upper and lower. For others
required, list model and part number needed.
Call for assistance.
Surfacers last with routine maintenance and
occasional repairs. Parts available for your
Shuron/CMV/TMI 88, 488, 8220 and 8520 by
referencing your OEM manual’s part number
or call for assistance.
Criterion MAX Surfacer
Optek
Electrical: 110 volt, 60 cycle, 12 amp Specs:
46” (117cm) h x 16” (41 cm) w x 30” (76 cm) d
Loh Toro X2S Cylinder Surfacer RC
OWC
Cylinder Surfacer CMV 8220/8520
Sentilles
Cylinder Surfacers & Polishers
CMX50 Finer/Polisher
Coburn
12287 Leveling Foot takes 4, Foot Adjust
1277 For yoke gimbal assembly, Bearing
13290 Panel-start, Switch
16892 Blunt pins to fit #45269 or #45272, Pin
17023 To secure baffle, Ring, Baffle Retain
17031 Lap table hold down screw, Lap Holder, Screw
17241 Air pressure control, Regulator
17351 Panel-Power on/off, Switch, Toggle
17410 Back table clamp, Lap Holder, Clamp
17416 Front table clamp compression spring, Lap
Holder, Spring
17468 Slurry pump 115V 50/60Hz, Pump
17484 Bowl drain tight fit stopper, Stopper
205 Sharp w/shoulder-Long wear for #45269 or
#45272, Pin
31425 Slurry pump 220V 50/60Hz, Pump
31654 Panel clamp up/down, Switch, Toggle
3180 Gear linkage drive & u/m traverse, Bearing
45002 Front table clamp, Lap Holder Clamp
45012 Main body only (no accessories), Lap Holder
Table
45026 Applies pressure to clamp lens, Air Cylinder,
Special
45037 Self Aligning, Bearing
45048 Shield dish under lap table, Baffle, Guard
45050 Under slurry tank covering gimbal assembly,
Baffle, Gimbal Cover
45060 220V 50Hz (8220), Motor Gear
45067 Metal handle with locking nut, Lap Holder
Handle
45069 Behind pin arm assembly, Baffle, Upper
45076 Under lower baffle shield #45048, Baffle, Lower
45086 Lower Motion, Bearing L/M
45090 Upper motion block S/A & gimbal S/A, Bearing,
Thrust Needle
45091 Upper motion block S/A & gimbal S/A, Bearing,
Thrust Washer
45092 Gimbal S/A #45165, Bearing, Thrust Needle
45093 Gimbal S/A #45165, Bearing, Thrust Washer
45095 Gimbal S/A #45165, Bearing, Rod End Male
45100 Gimbal S/A #45165, Bearing, Rod End Female
45101 Lower motion 115V 60hz (8520), Motor 2 speed
45102 Lower motion 220V 50hz (8520), Motor 2 speed
45117 220V 50Hz (8220), Motor, Gear
45118 Lower Gear Drive Belt, Belt
45120 Lap table, handle, clamps, springs & hardware,
Lap Holder S/A
45228 220V 50hz, Motor Gear
45238 Upper Motion, Bearing U/M
45239 Gimbal S/A #45165, Bearing, Aircraft
45269 Metal block to hold pins, Pin Holder
45272 Pin holder with pins & hardware, Pin Holder S/A
4692 Upper motion block, Bearing, Needle
4847 Lock leveling foot #12287 takes 4, Nut, Lock
Foot Adjust
61047 Power 120V, Relay
61049 Motor 220V, Relay
61056 Panel-Auto reset cycle timer 115V 60Hz, Timer
61183 20A, Fuse
The Coburn CMX50 Finer/Polisher is an
affordable and robust solution for conventional fining and polishing that delivers exceptionally accurate lenses by combining optimal
processing times with pressures in accordance with the lab’s specified materials.
CMX50 processes via two spindles the entire
spectrum of materials including CR39, polycarbonate, hi-index, and glass.
Power 230 VAC, 50/60 Hz, 7.5 Amps
Air requirements 80 psi (minimum)
100 psi (maximum)
Water pressure 40 psi (maximum)
Dimensions 26” (w) x 35” (d) x 64” (h)
66 cm x 89 cm x 64 cm
Weight 370 lbs/168 kg
427 Industrion
Optek
Building on the solid design and reputation of
the model 425, the 427 Industrion toric finer/
polisher series offers advanced features
designed for the most demanding, high production environments. Key Features: Multiple
materials processing with two customizable
settings for pressure and cycle time - Patented
motion provides true axis control - Two-speed
motor offers enhanced versatility - Gear belt
drive mechanism minimizes vibration and
prevents motion irregularities during processing - Double baffle system with tertiary internal drip shield protects internal components
The Criterion MAX surfacer is the third generation of Optek’s landmark Criterion Digital
Surfacing Cell. Based on the industry-leading
mechanical design of the Optek 425, Criterion
MAX extends this technology by utilizing a
state-of-the-art PLC control to reduce operator decisions and increase quality. When interfaced to Rx calculation software, the Criterion
MAX automatically sets the optimal spindle
speed, pin pressure and cycle time for each
job by simply entering the job number.
Key Features - Patented motion provides true
axis control; Slurry Temperature Monitoring slurry temperature is carefully monitored and
a warning is issued if preset material based
temperature range is exceeded; Vacuum Lens
Loading; Slurry Pre flood System; Multi
Material Processing – processing parameters
for each material are automatically set from
the on-board material database (manual
mode) or via download from a server; Dual
Pressure Clamping – allows the cycle to start
at reduced pin pressure before increasing to
full pressure for the duration of the cycle;
Maintenance Advisor – records running hours
to advise user when to perform scheduled
maintenance.
Ergonomic design, especially efficient in high
production installations. Foot pedal operated
tool release. Variable spindle speed. Working
range from -20D concave to +12D Convex
Reconditioned.
TORO-X-2S
Satisloh
Smoothing and polishing machine for processing spherical and toric lenses in Rx laboratories. Perform the latest in one-step processing for plastic, polycarbonate and mineral
glass. The patented Satisloh “V” groove pneuSpecifications
matic reception applies pressure uniformly
across the surface of the lens and eliminates
Size: 21” W • 30.5” D • 54.75” H
pins during the cycle. This eliminates unwantWeight: 400 lbs
ed prism and off-axis cylinder. Available with
Power: 120V, 60Hz, 1~ (other voltages avail- conventional Coburn and Gerber blocking
receptions. 63”h x 26”w x 31”d. 385lbs.
able)
FPZ Finer Polisher
TORO-X-2SL
OWC
Satisloh
Fast, easily adjustable strokes from 23mm x
58mm to 35mm x 71mm. Dual timer, dual
speed. Pneumatic lap tables (manual available). Unique motions. Stainless steel bowl.
Compact design requiring minimum floor
space. Easy to load and operate. Selfcontained slurry system, yet easily adaptable
to central systems. 420lbs. 110v, 60 cycle, 12
amp. Specs: 30”d x 16”w x 46”h.
The most convincing feature of the Toro-X2SL is its capability for automatically adjusting time, pressure and speed for the smoothing and polishing process. The Toro-X-2SL
design takes advantage of all the features of
the Toro-X-2S, but in addition employs a
memory programmable control mechanism
which allows for individual settings and programming of rotational speed, working pressure and working time. The Toro-X-2SL reduc-
10/12/11 11:20 AM
SURFACERS
es operator decisions, handling times and 115V AC, 60Hz, 1 phase, 8A.
simplifies operation. Data can be input either 23962-00
directly via the machine control panel or, as an Contact Coburn for current pricing.
option, automatically via a barcode reader.
Coburn Dry Chiller
Two-spindle version PLC-control with display.
63”h x 26”w x 31”d. 451lbs.
Coburn
MO16 Chiller
OWC
W303 RC Sphere Lap Cutter
OWC
A thermoelectric cold plate for chilling blocking rings. The Dry Chiller does not require
hoses to recirculate the coolant mixture
through the system. Includes three brass
blocking rings. 4”h x 7-1/4”w x 6-1/2”d. 110V
AC, 1A, 10lb.
40025-00 Try Chiller
40026-00 Chilling Ring
310 Chilling Unit
Optek
tures up to 113°F(45°C), even with high water
temperatures during start up. Available in
6513 btu and 13379 btu units. Contact PSI at
800-237-8154 for more information.
Model 710 Chiller
Lap Cutters
123
PSI
For chilling, polishing and blocking ring; manifold can accommodate four individual hookups. 22”h x 19”w x 11”d (40.6cm x 40.6cm x
28cm). 70lb.110V, 8A, 1/4hp.
MO16-1 Small Chiller
A compact, highly efficient, fully self-contained and air cooled unit. The 710 has a
chilling capacity of 9.6 gallons per hour of
50°F water, based upon 80°F inlet water and
90°F ambient temperature. The unit sits in a
condensation tray on casters, which eliminates water on the floor from condensation.
The 710 Chiller has a flow-through evaporator
and will maintain the temperature to ± 2°F. The
compressor is a hermetically sealed reciprocating 1/4HP, 115VAC, 60Hz, single phase
Small chilling unit to be used for blocking or
up to 4 hook-ups. 16”h x 16”w x 11”d (35.5cm rated at 3100 BTU. The compressor has a five
x 35.5cm x 25.4cm). 51lb (14.1kg). 110V, 5A, year warranty. All other parts have a one year
1/20hp.
warranty. All hose fittings and the Little Giant
Pump are included. 27”h x 20”w x 15”d.
OWC
Heavy duty with curve range 2–20.00 diopter
concave or convex. Both flat back and taper
tool up to 8” in diameter can be cut with accuracy and speed. 55”h x 45”w x 27”d (140cm x
117cm x 69cm). 900lbs (410kg). 220V, 8A.
Lens Processing Systems
Lens Free Surfacing
Precision Tool
Pneumatically actuated, the lens free surfacing Deblocker deblocks both lenses simultaneously. Saving time and wrist. Designed for
Loh or Gerber Blocks. Air pressure is easy to
set up and easy to uses.
A must for quality fined and polished plastic
lenses. Will handle eight spindles on surfacing
machines. Built-in manifold with flow control
valves to regulate temperature of four individual outlets. Fully automatic standby
reserve system stores two gallons of cold fluid
at approximately 25°F. This unit is also ideal
for blocking cooling rings. Unit comes fully
charged and ready for operation. 30”h x 24”w
x 13”d (76cm x 60.8cm x 33cm). 130lb (58.5
kg). 115V, 60Hz, 1 phase, 10A, 230V, 50Hz, 1
phase, 5A.
WAC Quiet Compressor
OWC
Slurry Hose Equipment
ST-6000 Slurry Hose Kit
Optical Machinery
310
OM-003B Small Chiller for Blocker
Optical Machinery
Quiet compressor. 4.0 gallon capacity, 2.2 cfm
WCOMP-Oil-Less Compressor
Pneumatic Equipment
OWC
WAC 12-40 Quiet Compressor
The Slurry Hose Kit is fully adjustable. Will not
vibrate out of position. Lets the operator
direct slurry or polish exactly where it is
needed. Comes as a complete kit.
OWC
Lines run to blocking rings so alloy or wax is
ST-6000
cooled immediately promoting blocking effiContact Optical Machinery for current pricing.
ciencies; temperature is adjustable from +/Polish Feed Line
45 to 60; will handle two blockers; includes
PSI
pump and lines for hook-up to your blocking Oil-less compressor. The direct drice motor
ring; uses a mix of 50-50 windshield washer eliminates belts and pulleys, delivering 125
PSI with a 3 gallon tank.
fluid with tap or DI water.
10.6 gallon capacity. 7.5cfm.
OM-003-P Chiller
Chillers
PSI
Optical Machinery
Slurry Chillers
Chilling Unit Model 404
Coburn
1/20hp Chiller can be used for cooling dual
center blocker and cooling rings for other
blockers. Unit comes complete with pump
and hose. Chiller will cool two Blockers with
two sets of rings. Equipped with large pump
and chilling ring for cooling polish in the surfacing machine.
For quality fined and polished surfaces on
plastic lenses. Has extra nipple for necessary
coils and hoses to cool additional surfacers.
24”h x 20”w x 12-1/2”d (61cm x 51cm x 32cm)
plus 6” (16cm) clearance space. 122lb (55kg). Contact Optical Machinery for current pricing.
Replaces the original stainless steel polish
feed spout on the Loh Cylinder Machine.
Provides better polish flow because the ends
of the spout are closer to the lens. The small
diameter of the plastic loc line fitting increases the polish pressure for a more direct flow.
Flexible loc line fittings can be adjusted to
different positions giving the operator the ability to direct flow to the areas where it is
needed most. 12mm stainless steel with 1/4”
loc line fittings.
Easy to use chiller with all components packaged inside a compact, low weight unit. It
offers full frontal access and a removable tank
for easy maintenance. Precise temperature
control and continuous operation in all conditions with antifreeze thermostat and water
level sensor ensure that operating temperatures are maintained while processing lenses.
This environmentally friendly unit uses R407C
refrigerant and offers energy savings of 115M
around 20%. Operates with ambient tempera- Contact PSI for current pricing.
10/12/11 11:20 AM
124
SURFACERS
Slurry Systems
Graymills Slurry Pump
Precision’s Slurry Recirculation and
OWC
Filtration System
Slurry Testers
Precision Tool
OM-17-00 Slurry System
Slurry Test Kit
Coburn
Optical Machinery
Graymills replacement slurry pump.
16281 220V
16285 110V
Slanted bottom; stainless construction with
heavy duty pump and motor; designed to give
consistent Baume; reduce fining and polishing
time; reduce emery and polish usage; reduce
clean-up time has chiller ring to hook-up to
chiller system; 1/2 hp motor; 115 or 220 volt
1-phase; 15 gallon/minute, 15 gallon capacity,
8-spindle capacity; 55 lb.
Slurry Filter System
OWC
All stainless steel tank. Stainless steel, heavyduty pump comes powered by your choice of Cuts costs as well as fining and polishing
times and improves the quality of your surmotor up to 3/4 hp. Cone-shaped bottom faces. Complete with two hydrometers to
promotes more even Baumé readings provide Baumé readings from 0–35°, and a
throughout the work day. Dual wall construc- Hydrion dispenser for additional pH factor
control of the slurries. Comes complete with
tion ensures even cooling. Comes with a instructions and a detailed procedure for use
polypropylene filter and has a special clean- with Coburn cylinder machines.
out tube. Circulates polish or emery. Superior 8013700
OM-17-99 Slurry System w/ Filtering
filtering and cooling greatly prolong polish life.
Optical Machinery
12- gallon tank capacity. 14”h x 24”w. Up to 43
gpm capacity. Tank can be pumped empty by
Baumé Hydrometer
Optek
a flip of a valve and flushed clean with its
Compact slurry filter system. Designed to fit
internal wash system.
inside or next to your cylinder machine. Easy
change filter extends the life of your polish
and reduces waste due to scratching from
Central Slurry System
debris. 14”h x 15”w x 8”d. 25lbs. 110V.
PSI
Slurry Pumps
OWC
Slanted bottom; stainless construction with
heavy duty pump and motor; designed to give
consistent Baume; reduce fining and polishing
time; reduce emery and polish usage; reduce
clean-up time; with the filtering system on the
OM-17-99, unwanted particles are filtered out
of the polish or fining water helping produce a
better lens; it helps prolong the life of the polish and saves water. 3/4 hp - 115 or 230 volt.
OM-17-99W Water Filter System, Same as the OM-1799 but filters for fining only
OM-17-99W Filter Socks
Optical Machinery
For glass fining and polishing. Increases quality control of surfaces and decreases fining
time by control of slurry mixture.
Plastic Baume’ Gauge
PSI
Efficiently supplies polish or emery to 10
spindle surfacers. Reduces polish consumpReplacement pumps for Coburn 5056, 5000, tion by up to 50% and greatly reduces labor,
etc. 110V AC, 50/60Hz or 220V AC, 50/60Hz.
waste and clean-up. Continuously filters pol28177 220V
29357 110V
Slurry Pumps
OWC
ish and emery and allows increased production yields. Cone-shaped stainless steel tank
eliminates waste due to settling. Pump has no
seals or bearings to wear out. Connects easily This tool measures the percent of solids in
with 955 or 980 chiller or any cooling system suspension in glass and plastic polish as well
as emery. The Baume’ gauge is graduated
using No. 3911 cooling coil. 28”h x 18”w x from 0 to 35. It can be ordered with or without
18”l. 5 gallon capacity. 40lb. 110V. 5A.
plastic cylinder.
3911 Cooling Coil
911
Filter Socks/Bags
OM-17-10 10 mic filter
Satisloh Smoothing & Polishing Feed
PSI- 521B Plastic Cylinder only
PSI-531A Baume’ Gauge only
PSI-BAUM Baume’ gauge and Plastic Cylinder
Sphere Surfacers & Polishers
Systems
Replacement pumps for Coburn 505, 506, etc.
110V AC, 50/60Hz or 220V AC, 50/60Hz.
Satisloh
21180 220V
21476 110V
Ball Joints
Spout Assembly
OWC
OWC
252-341-342 Handle Retrofit KitSphere Surfacer
Sentilles
Offers a variety of smoothing, polishing and
coolant central systems for prescription work.
Now available this new handle retrofit kit for
These systems provide a homogeneous con- your Shuron-CMV Sphere Surfacer 252-341 or
centration for the individual smoothing and 342, to restore your machine to maximum
polishing machines. Available in 5-liter, 15-liter operating efficiency. Order Handle Retrofit Kit.
Replacement Parts - FP0118 ball joints for Replacement Parts - P/N 21473-01 slurry disOther sphere surfacer parts available; use
and 40-liter sizes.
persal system.
slurry system.
OEM part number or call for assistance.
10/12/11 11:20 AM
SURFACERS
125
Automatic Sphere Surfacer CMV
Timer Box Assembly Shuron 252 A&C
ICM-11
or CMV 341 & 342 Sphere Surfacers
Filter & Recycling System for Fining
Water
Sentilles
PSI
Sphere Surfacers & Polishers
Sentilles
341-342-252 A & C Sphere Surfacers
CMV-Shuron Model Air Head
Pressure Kit
Sentilles
Designed for simultaneous fining or polishing
of two concave/convex surfaces. No blocking
New retrofit air head pressure assembly to required for lenses over 1mm edge thickness.
update and repair your CMV or Shuron Sphere Rugged construction ensures precision and
Surfacer. Restore your machine to maximum
efficiency. Other repair parts available. Refer
to OEM manual for part numbers or call for
assistance.
341-342-252 A & C Sphere Surfacers
New Rubber Bowl
Sentilles
long life with minimal maintenance. Two-stage
pressure system reduces costly spoilage.
To order a complete timer box assembly to fit
any of the above sphere surfacer models,
order 8500-01 Timer Box Assembly. To order
individual parts as shown, order 8753 Timer
Housing, 8500 Timer only, or 6384 Clamp
Ring-Timer. For other parts replacement on
Shuron or CMV machines, refer to your OEM
manual for part numbers or call for assistance.
High speed and operating pressures minimize 6384 Clamp Ring Timer
cycle time. Fines in 10 seconds, polishes in 60 8500 Timer only
Designed to filter and recycle fining water.
Eliminates the need for a continuous water
supply to the fining operation. The system
uses filter bags to remove the particles, and
the two-bag configuration allows continuous
operation. Unit can pay for itself in water savings in five to six weeks. The pump operates
on 110V, single phase. 40lb.
952A
Fining Water Additive
PSI
8500-01 Timer Box Assembly
seconds. Plano to ± 15D, lens diameters 8753 Timer Housing
20mm to 100mm. 36”h x 32”w x 28”d (170cm Contact Sentilles for current pricing.
x 80cm x 70cm) on base. 220V/380V, 50Hz or
60Hz, 4kw total. Air 88PSI (6 bars).1,190lbs
Water Treatment & Recycling
Systems
(541kg).
ICM-11D sphere fining
ICM-11P sphere polishing
993-2T & 993-1T Filtration Systems
PSI
ICM-11 CMV Sphere Surfacer
Replacement Parts
Sentilles
Now available replacement parts for CMV
341-342 or Shuron 252 A & C Sphere Surfacer
as well as new rubber bowl, part number
5036. For other replacement parts, Refer to
OEM manual for part numbers or call for
assistance.
Automatic Sphere Surfacer 252A or
All replacement parts for ICM-11 CMV
C, 341 & 342
Automatic Sphere Surfacer are available.
Refer to your OEM parts manual for numbers
Sentilles
to order or call for assistance. Parts manual
also available. Parts shown: 201 03 001 Shaft
Lower Spindle; 201 04 001 Coupling; 201 04
027 Eccentric Pin Holder; 201 05 028 BellowsLarge.
201 03 001 Shaft Lower Spindle
201 04 001 Coupling
201 04 027 Eccentric Pin Holder
201 05 028 Bellows-Large
Fines in 90 seconds, polishes in 3 minutes or
less. Automatic timer with cycle shut-off.
Sphere Surfacer Replacement Parts
Completely sealed, self-contained hydraulic
for Shuron 252/CMV 341-342
system to prevent contamination. Affords
Sentilles
PSI’s Fining Water Additive cleans and lubricates fining pads during the fining process.
For use with plastic, high index and polycarbonate lens materials. Provides clean, trouble
free operation with increased stock removal
rates. Eliminates swirls and particle buildup
on pads which can occur with softer lens
materials. Foam is controlled while giving the
best cleaning and lubrication. Ideal for labs in
areas with hard water. Use in cylinder machine
The 993-2T Filtration System addresses the bowls or in filtration and recycling systems. 1
needs of laboratories that run edgers or cylin- gallon, 10 lbs.
der machines in a pod or line configuration. #1110G
This filtration system utilizes two stainless Contact PSI for current pricing.
steel tanks. The first tank settles the larger
Pan Handler Additive
particles out of suspension. The second tank
PSI
is a reservoir, with a combined capacity of 45
gallons that recirculates to the filter canister
and then to the cylinder machines or edgers.
The system can be converted to a one-tank
unit to accommodate labs with limited floor
space. The 993-2T is available with a 7-cluster filter cartridge (model #993-2T) 19” 7-cluster filter cartridge (model #992-2T19) or a single Hurricane filter cartridge (model #9932THUR90)
993-1T 18.5”H x 18”D x 26”L
PSI’s Pan Handler Additive is a settling agent
993-2T 18.5”H x 18”D x 70”L
for pan handler wastewater treatment sysContact PSI for current pricing.
tems. It pulls particles out of the water and
settles them to the bottom of the tank for
Cad-Con 1000
disposal. Pan Handler Additive is not a wastePSI
water treatment, only a settling agent.
Recommended for use in PSI’s 860 Pan
Handler. 1 gallon, 12 lbs.
#2120G
Pan Handler II
PSI
instantaneous stroke reversal, thereby eliminating targeting. Provides infinite stroke
length adjustment and head movement
speed. Equipped with vibration dampening
and self-contained slurry pumping. Spring or
air head lens clamping available. –25.00D to
+11.50D for all lens sizes. 27”h x 15”w x 31”d
(69cm x 38cm x 79cm). 115V, single phase
60Hz, 8A or 230V, single phase 50Hz, 4A.
270lbs (122kg). Model 252A 341, spring head Surfacer replacement parts available for
lens clamping. Model 252C 342, air head lens Shuron 252 and CMV 341 & 342 Sphere
clamping.
Surfacers (only some pictured). To order, use
341 Spring Head Lens Clamping
the part number in your OEM manual or call
342 Air Head Lens Clamping
for assistance.
Cad-Con 1000 treats alloy reclaim water and
polish wastewater for non-hazardous disposal. Separates lead and cadmium from wastewater and settles it, so that the water can be
poured down the drain. Creates a sealant on
the cadmium and lead particles that makes
them inactive and safe for solid disposal. CadCon 1000 is an inexpensive form of treatment
for
cadmium
and
lead
disposal.
Recommended to be used in conjunction with
PSI’s 860 Pan Handler for best results.
1000 8 lb. container
1001 1 lb. container
A self-contained water treatment system for
treating contaminated effluent from generators, polishers and fining operations. The
treatment process takes approximately two
hours and allows the laboratory to safely discharge the processed water to the sewer and
dispose of the semi-dry solids easily. For
additional receiving tank, consult factory.
860
10/12/11 11:20 AM
126
Abrasives
Emeries
Coburn
extremely hard Black abrasive. Particles are
fast-cutting and resist breakdown. Suggested
grit size for roughing operations is 60.
Aluminum Oxide: A Tan-colored abrasive for
speed grinding. Suggested grit size for second grinding is 180; for finishing grinding
before fining, 320. Minimum order: 45lb.
DFS II Surfacing Pad System
Second Fine Pads
3” 3µ 6 petal - .008” ± .0005”, Mauve, 85426-00
3” 3µ 7 petal - .008” ± .0005”, Mauve, 85670-00
3” 3µ 8 petal - .008” ± .0005”, Mauve, 85427-00
80mm 3µ 7 petal - .008” ± .0005”, Mauve, 85459-00
Microgrit (WCA)
DAC Vision
K.C. Abrasive Optical Powders:
Aluminum oxide in regular or suspended. For
fast cutting and uniform, scratch-free surfaces. Packed in 50lb (20.5kg) containers.
Roughing Emery Super ST:
11957-00 175 grit
11958-00 145 grit
11959-00 125 grit
Aluminum oxide precision fining compound
for glass grinding. The flat, disc-shaped particle provides a superior surface quality and
resists breakdown because pressure is distributed more evenly than conventional abrasives. Packaged 44lb (20kg) per carton.
MG-9T, MG-12T, MG-15T & MG-20T.
Opti-Speed® Optical Powder
DAC Vision
Highest quality available, guaranteed to give
complete satisfaction when used properly.
Uniform in shape and size. 275, 250 or 225
Microgrit WCA Aluminum Oxide:
recommended as a smoothing emery to prePrecision lapping powder for glass fining. pare surface for final polish. 200 or 175 excelAvailable in 44lb (20kg) containers, 12T, 15T,
lent where only fine emery is desired. 145 and
20T sizes.
125 are the most popular sizes for all types of
59990-04 WCA-12T
59991-04 WCA-15T
fine finishing work. Suspension Treated (ST) at
59992-04 WCA-20T
no extra cost. Standard packaging 50lb
59998-04 WCA-15G (Specially suspension treated for
(22.5kg) fiber drums. Stock number desigunusual water conditions.)
nates micron size.
Pink Supreme Pad
Coburn
Engineered specifically for all materials and
extended polishing cycles, Pink Supreme
combines a high-density, precision cut rayon
fiber with a heavy mass of high shear natural
pressure sensitive adhesive for the latest in
precision pad technology.
Regular
KC-125R
KC145R
KC-175R
KC-200R
KC225R
KC-250R
KC-275R
KC-95R
Suspension Treated (ST)
KC-125ST
KC-145ST
KC-175ST
KC-200ST
KC-225ST
KC-250ST
KC-275ST
KC-95ST
KC Abrasive Products
PSI
Available in high and low tack adhesives for
base or bare lap processing New fiber technology featuring increased polish saturation
and uniform lens support High-density carrier
for added stability and uniform pad compression Natural rubber base adhesive system for
easy removal with no residue Superior surface
quality delivered through exceptional fiber
control
One-Step Pads CR39/Hi-index:
Designed for easy removal of pads, the DFS II
Surfacing Pad System is the solution to time
consuming pad peeling in today’s high-production lens processing laboratories. A reusable, embossed base pad works with our fining and polishing pad adhesive to provide a
dual fastening system for effortless removal of
surfacing pads. Operators simply cover a lap
with the DFS II Base Pad and then apply, by
hand, a fining pad to the base pad. Lenses are
then processed as usual. When the cycle is
complete, the operator easily removes the
fining pad from the base pad and continues to
the next step. Operators use the system’s
same technique for polishing lenses.
One-step fining for plastic lenses requires a
special compensated pad that approximates
the thickness of the polishing pad. The CSF
pads (compensated single fine) listed below
are about .018” thick to assist in preserving
curve compatibility when polishing.
DFS II BASE PADS
3M Optical Film 361M, a product developed
especially for ophthalmic lens fining, combines electrostatically oriented particles with
a flat, firm film backing that delivers more cutting energy to your work piece. Optical film
provides more consistent stock removal from
lens to lens. And because the cut and finish
are more consistent, you will achieve more
consistent results in your fining process,
reducing rejects and lowering your costs.
DFS II Blue 3”, 4 Petal – 250/RL, 8347300
DFS II Blue 3”, 7 Petal – 250/RL, 8347600
DFS II Orange 2.75”, 12 Petal – 250/RL, 8347500
HI-DIOPTER 16 PETAL PADS
Plastic Two-Step System. First Fine Pad – TIME: 1
MINUTE @16-18 PSI
DFS II 12 Mic Yellow NC 16 Petal – 250/RL, 8348316
PLASTIC PADS
One-Step Pads – time 1-1.5 minutes @16-18 psi
DFS II OptiFilm 11 3” Comp 7 Petal – 250/RL, 8349103
DFS II OptiFilm 15 3 1/4” Comp 7 Petal – 250/RL,
8347983
POLISH PADS
CR 39: minimum 4 minutes, Hi-Index: minimum 5
minutes, Polycarbonate: minimum 6 minutes
DFS II Yellow Polish Pad 3” 7 Petal – 250/RL, 8348503
DFS II Yellow Polish Pad 83 mm 7 Petal – 250/RL,
8348583
POLYCARBONATE PADS
One Step Pads: – TIME 2-2.5 MINUTES @16-18 PSI
DFS II Crusader 3” Comp 7 Petal – 250/RL, 8349203
8348283
8348983
DFS II P500 3-1/4” Comp 7 Petal – 250/RL, 8348183
FOR BEST RESULTS, APPLY BASE PADS TO LAPS
WITH A PAD PRESS.
Plastic/Polycarbonate Lens Fining
Pads
Coburn
Coburn Lens Surfacing System pads are produced from state-of-the-art processing materials, designed and manufactured to optical
Thickness: Pad material and adhesive: 41.0
grade standards. Coburn Lens Surfacing
mils Liner: 4.5 mils
System pads are available in a variety of
High quality abrasives manufactured for conshapes and sizes for your convenience.
Peel Adhesion: oz./in. g./in.
sistent stock removal and resistant to breakdown during processing. Narrow particle size Blue Diamond Pads
PSTC #3; Liner side 74 2,100
distribution assures a uniform surface finish. New technology offers superior performance
Dynamic Shear: (@12”/min.) Liner side 70 lbs./
as shown by the results achieved with the 9
Suspension treated. 50lb box.
sq. in.
micron second fine pad. An item Coburn is
125ST 12.5 micron
proud to include in its line of second fine
145ST 14.5 micron
Order No. Normal Pad System
pads. This pad has set the performance stan175ST 17.5 micron
dards that all others must meet. PSA backed.
3” 7 petal low tack 282349
Thickness: .008”. Packaged: 500 pads/roll.
80 mm 7 petal low tack 282359
Second Fine Pads
3.5” 7 petal low tack 282369
Base Pad System
3” 7 petal high tack 282379
Abrasives, Fining & Polishing
Pads
3N1™ Fining Pads
Coburn
80 mm 7 petal high tack 282389
Abrasives
DAC Vision
Coburn 3N1™ Pads fine CR-39, Hi-Index and
Polycarbonate lenses in one step. When fining
all inorganic materials, the 3N1™ pad allows
labs to stock and use only one abrasive pad.
With one fining pad in use, wrong pad selection errors are eliminated. 3N1™ pads are
available for use with either the DFS II Pad
System or conventional systems.
Fine Emeries: Micro-graded Aluminum Oxide.
175 and 145 are excellent finishing emeries
when only one fining operation is desired. 145
and 125 are the most popular sizes for all
types of finishing. Products come regular or 3N1™ P800 3-1/4” Compensated 7 Petal
suspension treated. Size/Micron: 175/17.5, Order No. 8573100
145/14.5, 125/12.5. Silicon Carbide: An Contact Coburn for current pricing.
126-152_SF1110_SurfacingTools.indd 126
LENSMATE PADS
Lensmate 2nd Fine Pads are made from precision grade, 3 micron, aluminum oxide grain,
coated to a 3 mil thick polyester film and
backed with Coburn’s industry proven adhesive. Superior pre-polished surfaces for
reduced polishing times. Packaged: 500
pads/roll.
Coburn
3” 9µ 6 petal - .008” ± .0005”, Lt. Blue 8221300
3” 9µ 7 petal - .008” ± .0005”, Lt. Blue, 85673-00
3” 9µ 8 petal - .008” ± .0005”, Lt. Blue, 82216-00
80mm 9µ 7 petal - .008” ± .0005”, Lt. Blue, 85460-00
Intelligent Lens
Prepolish Pads
Processing
System:
Used with the CNC Lensmaker, these pads
are all used in a one-step fining (pre-polish)
procedure. The IQ process allows for minimal
stock removal during the traditional fining
step.
Hard Resin/Hi-Index
8 petal (3”) - .018” ± .0005”, Gray, 85687-00
Polycarbonate
7 petal (80mm) - .018” ± .0005”, Brown, 85482-00
Honey Fine P1200 Compensated (250 pads/roll)
3” 7 petal - .018” ± .0005”, Brown, 85686-00
P1000 Compensated Aluminum Oxide
3” 7 petal - .018” ± .0005”, Brown, 85685-00
3” 8 petal - .018” ± .0005”, Brown, 85138-00*
3-1/2” 7 petal - .018” ± .0005”, Brown, 85685-35
80mm 7 petal - .018” ± .0005”, Brown, 85454-00*
P800 Compensated (250 pads/roll)
3” 7 petal - .018” ± .0005”, Blue, 85684-00
80mm 7 petal - .018” ± .0005”, Blue, 85483-00
OptiFilm Pads:
11 CR39 Hi-Index One Step Fine
83mm 7 petal - .018” ± .0005”, Purple Stripe, 85496-83
15 One Step Fine
80mm 7 petal - .018” ± .0005”, Orange Stripe, 8549700
83mm 7 petal - .018” ± .0005”, Orange Stripe, 8549783
30 Poly One Step Fine
80mm 7 petal - .018” ± .0005”, Green Stripe, 85495-00
35 Poly One Step Fine
80mm 7 petal - .018” ± .0005”, Yellow Stripe, 85494-00
Polycarbonate One-Step Pads:
(250 pads/roll)
Crusader Poly One-Step
83mm 7 petal - .018” ± .0005”, Black
Crusader Polycarbonate One-Step
3” 7 petal - .018” ± .0005”, Black, 85697-03
P500 Polycarbonate Compensated
3” 7 petal - .018” ± .0005”, Blue, 85689-00
83mm 7 petal - .018” ± .0005”, Blue, 85689-83
Polycarbonate Pads:
Special pads for processing polycarbonate
lenses. Coburn recommends a two-step fine
for polycarbonate using a polyfine first fine
and p1000 pad for second fining. Packaged:
500 pads/roll.
M1000 Second Fine
3” 7 petal - .012” ± .0005”, Brown, 85677-01
3” 8 petal - .012” ± .0005”, Brown, 80940-01
OptiFilm 15 Non Comp Poly 2nd Fine
7 petal - .018” ± .0005”, Orange Stripe, 85493-00
P1000 Second Fine
80mm 7 petal - .012” ± .0005”, Brown, 85455-00
P1200 Aluminum Oxide 2nd Fine
3’’ 7 petal, Brown, 85677-00
3’’ 8 petal, Brown, 809400-00
80mm 7 petal - .012” ± .0005”, Brown, 85456-00
P280 Grit Compensated First Fine
80mm 7 petal - .018” ± .0005”, Black, 85464-00
P280 Grit SiC First Fine
3” 7 petal - .012” ± .0005”, Black, 85676-00
3” 8 petal - .012” ± .0005”, Black, 82258-00
80mm 7 petal - .012” ± .0005”, Black, 85457-00
Polyfine 2000 First Fine
3” 7 petal - .012” ± .0005”, Gray, 85675-00
Polyfine 2000 Second Fine
3” 7 petal - .012” ± .0005”, Brown, 85678-00
Polyfine Plus First Fine
3” 7 petal - .012” ± .0005”, Black, 85674-00
Rough-In Pads:
Course grit roughing pads for plastic lenses
provide major stock removal. Primarily intended for roughing in curves beyond the normal
range of generators. Also used for correcting
off-curves, changing curves, and prism work.
Stock removal is substantial; 7/10 of a millimeter in about one minute. Packaged: 500
pads/roll.
P280 Grit SiC
3” 6 petal - .012” ± 0005” Thick, Black, 82256-00
3” 7 Petal - .012” ± 0005” Thick, Black, 85676-00
3” 8 Petal - .012” ± 0005” Thick, Black, 82258-00
IQ Intelligent Lens Processing System: IQ
Prepolish Pads
Valu-Blue Pads™
Hard Resin/Hi-Index
7 petal (80mm) - .018” ± .0005”, Gray, 85463-00
Is an aggressive first fine pad for fast results.
10/12/11 11:21 AM
Rapid stock removal to reduce fining time.
Consistent, high quality surfaces. “Quick
Release Adhesive” for easy removal from lap.
Fining time: 45 to 60 seconds at 16-18 psi.
Packaged: 500 pads/roll.
from selected rayon fibers on a special backing material and a rubber based pressure
sensitive adhesive. Pad thickness is maintained at .019” ± .001” to be consistent with
our fining pads for curve conformity.
First Fine Pads - CR39 and Hi-Index
2-3/4” x 3-1/8” 15µ 6 petal - .012” ± .0005”, Dark Gray,
80159-00
3” 15µ 6 petal - .012” ± .0005”, Dark Gray, 80157-00
3” 15µ 7 petal - .012” ± .0005, Dark Gray, 85672-00
3” 15µ 8 petal - .012” ± .0005, Dark Gray, 81044-00
80mm 15µ 7 petal - .012” ± .0005”, Dark Gray, 8546700
Valu-Blue First Fine 7 petal - .010” ± .0005”, Blue,
85484-00
Valu-Blue First Fine 8 petal - .010” ± .0005”, Blue,
85485-00
3” Rocket-Blu Notched (200 pads/roll) - 6 petal .019” ±
.001”, Royal Blue, 80562-00
3” Rocket-Blu Notched (200 pads/roll) - 7 petal .019” ±
.001”, Royal Blue, 85682-00
Rocket-Lite Polishing Pads
Rocket-Lite polishing pads are an industry
standard and a proven component of the
Coburn Lens Surfacing System method of
processing plastic lenses; both hard resin and
polycarbonate. Rocket-Lite pads are made
from a high grade white velvet textured material with a rubber-based pressure-sensitive
Yellow Diamond Pads
adhesive. Total pad thickness of .019” ± .001”
One of the original abrasive pads that is carefully controlled to ensure compatibility
changed the way plastic lenses were fined. with our fining pads. Packaged: 200 pads/roll.
Still a favorite with many labs, a 12 micron 3 1/2” Rocket-Lite Notched - 6 petal 019” ± .001”,
yellow fining pad that pre-polishes the lens White, 80063-00
surface after the fine operation. Average stock 3” Rocket-Lite Notched - 6 petal .019” ± .001”, White,
removal is about 5/100 of a millimeter. PSA 80062-00
backed. Thickness: .008”. Packaged: 500 3” Rocket-Lite Notched - 7 petal .019” ± .001”, White,
pads/roll.
85681-00
Second Fine Pads
3” 12µ 6 petal - .008” ± .0005”, Yellow, 80211-00
3” 12µ 8 petal - .008” ± .0005”, Yellow, 81045-00
*85138-00 and 85454-00 have 300 pads per roll.
Plastic/Polycarbonate Lens Polishing
Pads
Coburn
C-Brite™ Heavy White Pads
3” Rocket-Lite Notched - 8 petal .019” ± .001”, White,
81059-00
80 mm Rocket-Lite* - 7 petal .019” ± .001”, White,
85461-00
ULTRA Polishing Pads
Ultra takes the best features of today’s proven
polishing pads and combines them for the
best possible performance. Ultra’s thicker
carrier provides more uniformity than other
pads sold today. This carrier has been combined with the more durable dye-free, flocked
fibers and clear flocking cement that have
proven successful for years. With no dye,
these fibers are more resilient, resisting breakdown and reducing slurry contamination.
C-Brite heavy white pads with their fine textured surface of non-woven fibers are an outstandingly effective polishing pad for glass
lenses. This feature and our special pressure
sensitive adhesive backing combine to produce a self-compensating pad for better lens 3” Ultra Polishing Pad - 7 petal .025” ± .001”, Peach,
85683-00
to pad contact. Packaged: 300 pads/rolls.
Glass Lens Polishing Pads
3” Notched C-Brite Hvy .025” ± .0025”, White, 8005800
Coburn’s Metal Fining Pads
Made from high purity zinc that gives an efficient base for fining glass lenses. Eliminates
lap tool wear. Engineered notches for good
slurry flow and curve compatibility. This series
of metal fining pads uses Coburn’s special
adhesive for firm anchorage. Strips cleanly
when removed. Each pad will fine approximately 5-8 lenses. Packaged: 300 pads/roll.
Metal Fining Pads
2 3/4” x 3 1/8” Notched MFP .012” ± .0005”, Silver,
82662-00
3 1/4” Round Notched MFP .012” ± .0005”, Silver,
82664-00
3” Round Notched MFP .012” ± .0005”, Silver, 8266300
Glass Lens Diamond Fining Pad
The cost-effective solution to glass fining.
Reduces labor, waste, machinery maintenance and rejects while increasing throughput. One pad fines 200 to 250 surfaces without emery.
Glass Lens Diamond Fining Pad
76 mm Round, Single Foil .015” ± .005”, Bronze,
85480-00
76 mm Round, Ten Pack .015” ± .005”, Bronze, 8548010
3.5” Ultra Polishing Pad - 7 petal .025” ± .001”, Peach,
85693-00
80 mm Ultra Polishing Pad - 7 petal .025” ± .001”,
Peach, 85692-00
YELLOW Polishing Pads
Yellow polishing pad material has been the
industry standard for polishing polycarbonate
for several years. Yellow utilizes a high-density textile base and multi-step finishing process to ensure precise pad thickness while
offering aggressive stock removal with outstanding abrasion resistance for the longest
polishing cycles. The exclusive natural rubber
based pressure sensitive adhesive provides
labs with outstanding consistency day in and
day out with residue free removal.
Yellow Polishing Pads
3” Yellow Polishing Pad - 7 petal .025” ± .001”, Yellow,
85694-00
83 mm Yellow Polishing Pad - 7 petal .025” ± .001”,
Yellow, 85694-83
*NOTE: 80 mm rocket-lite pads are packaged 250 pads/
roll.
produce a superior surface quality on all lens
materials when processed at the correct pressures and times. 250 pads/roll.
Fire Fine™ Compensated One-Step
DAC Vision
300999
11 Micron for 1 Step Processing of
CR-39, Mid-Index, & Spectralite™
Lenses Utilizing 3 Axis Generators
DAC Vision
The 11 micron Durafilm compensated onestep pad has proved to be an effective product for processing Spectralite™ lenses utilizing 3 axis generators. The 11 micron Durafilm
product utilizes a tightly controlled abrasive
grain that provides consistent stock removals
and surface finishes, along with the strength
of film backing for easy removal from the lap.
PDR1120NV 11 micron Durafilm compensated one
step 3” (76 mm), 7 leaf, 250/roll
PDR1120YF 11 micron Durafilm for Quick Release
3-1/4” (83 mm), 7 leaf, 250/roll
Spectralite™ is a trademark of SOLA Optical, Inc.
3 Micron Purple Second Fine
A Burgundy-colored P-1200 aluminum oxide
coated abrasive that removes approximately
0.3mm of stock in 2 minutes at 16lb of pressure. Provides an excellent surface finish for
polishing. Ideal for plastic and high index
lenses; thickness 0.018”. Fire Fine Light™ is
also available for use as a second fine pad for
processing polycarbonate lenses; thickness
0.009”.
PDR6900NV 3” (76 mm) -7 leaf
Harmony™ One Step Fining Pad
DAC Vision
DAC Vision
A patented coating technique allows the 3
micron abrasive grain to remove an adequate
amount of stock to prepare the lens surface
for the subsequent polishing step. This product provides the best surface finish of all
second fine pads. Thickness of pad is 0.008”.
PDR1300F 3” (76 mm)- 6 leaf
PDR1300N 3” (76 mm)- 7 leaf
PDR1300NN 3” (76 mm)- 7 leaf QR-IIC
PDR1300P 3 1/2” (89 mm)- 7 leaf
PDR1300R 3” (76 mm)- 16 leaf
Black Magic & Mean Green
Processing System
DAC Vision
Harmony™ is an advanced one-step abrasive
fining pad specifically designed to meet the
challenges of polycarbonate processing.
Harmony™ features a unique recipe of abrasive materials that actually reduce fining times
while providing an excellent surface finish. It
delivers consistent stock removal yet prevents the common problem of swarf loading
– resulting in fewer swirls and heat related
problems.
Two-step fining system for polycarbonate lens Harmony™ works on all generator surfaces
fining. Improved processing times and supe- and is offered in a variety of shapes, backings
rior finish. 3” and 3- 1/2” 7 leaf. 500 pads per and adhesives. 250 pads per roll.
roll.
Black Magic™ P400 1st Fine
PDR4000N 3” (76 mm) - 7 leaf
Mean Green™ 2nd Fine
PDR1050N 3” (76 mm) - 7 leaf
DAC. Diamond Fine Pad
DAC Vision
PDR8030NC - 3” (76 mm)- 7 leaf
PDR8030NLC - 3” (76 mm)- 7 leaf
PDR8030NNF - 3” (76 mm)- 7 leaf
PDR8030RF - 3” (76 mm) -16 leaf
PDR8030YF - 3 1/4” (83 mm) -7 leaf
Lumina™ Premium Polishing Pad
DAC Vision
Plasti-Sheen Val-U-Plus
Coburn
An economical plastic and polycarbonate lens
polish which is equal in performance to the
Super Plasti-Sheen 2020 series. It has a parGreen Supreme Polishing Pads
ticle size of 1.7 microns and runs at a Baumé
Green Supreme polishing pads are designed of 23.5 ±1 with a stock removal rate of 70mg
to withstand extended polishing cycle appli- per minute. As with the Super Plasti- Sheen, it
cations. The Green Supreme provides the has a PH of 3.2 ±1.
highest lustre possible onto polycarbonate, 11305-70 gallon
hi-index, and CR-39 lens material with signifi- 11305-80 5 gallon
cantly less fiber erosion than other pads. This Contact Coburn for current pricing.
premium grade material utilizes the best rubRFP-537 ONE-STEP FINING PADS
ber backed, pressure sensitive adhesive available. Packaged: 250 pads/roll.
Coburn
3” Round Green Supreme - 7 petal .020” ± .001”, Mint
Green, 85680-00
3” Round Green Supreme - 8 petal .020” ± .001”, Mint
Green, 85466-00
80 mm Green Supreme - 7 petal .020” ± .001”, Mint
Green, 85465-00
This Bronze pad has a special configuration
which makes the pad flexible and able to
conform to high curves. Uniform, precision
grade, diamond particle assures consistent
stock removal. Excellent surface finish Fiber design provides exceptional polishing
throughout life of pad. Material: diamond results. Pad surface employs a mixture of fiber
impregnated.
lengths and densities that place the polish
PD1860S 3” (76 mm), 8 leaf, 0.015” thick
where you need it on the lens surface. New
and improved textile backing provides
strength and durability, while reducing slurry
Fine All™ (Improved Performace)
carry-out and reduces slurry contamination.
DAC Vision
Available in Low-Tack and High-Tack adhesives for bare laps or base pads respectively.
Low-Tack for bare laps
PDR0700N 3” (76 mm) – 7 leaf
Rhino III™ Pads
A Coburn glass lens polishing pad is constructed with built-in, self-compensation for
minor curve variances. Thickness is .020”.
Coburn’s new RFP-537 one-step fining pads
are manufactured with the latest abrasive
Glass Lens Polishing Pads
2 1/2” x 3” Notched Rhino III .020” ± .001”, Blue,
technology available to the market today,
80874-00
guaranteeing consistent stock removal from
3 1/2” Notched Rhino III .020” ± .001”, Blue, 80879-00
pad to pad. The P-graded optifilm produces
3” Notched Rhino III .020” ± .001”, Blue, 80876-00
an excellent, smooth finish the first time of
Rocket Blu Diamond Pads
use, lowering your costs by decreasing
A quality plastic lens polishing pad designed rework. The pad material is also highly resisfor ease in handling while producing a high tant to creasing, which reduces scratches and
luster polish. Rocket-Blu pads are fabricated swirls on the lens’ surface. The RFP-537 pads
127
PDR0700Y 3 1/4” (83 mm) – 7 leaf
PDR0700P 3 _” (89 mm) – 7 leaf
PDR0700R 3” (76 mm) - 16 leaf
FINE ALL™ is a one-step compensated abrasive pad. It works well on all plastic lens
materials including: CR-39, Polycarbonate,
Mid-Index, and Hi-Index. FINE ALL™ is available in all standard sizes and backings,
including the Quick Release II system.
PDR8020NV 3”(76 mm) - 7 leaf
PDR8020YF 3 1/4”(83 mm) - 7 leaf
Hi-Tack for QR II-C base pads
PDR0708NN 3” (76 mm) - 7 leaf
PDR0708Y 3 1/4” (83 mm) – 7 leaf
PDR0708R 3” (76 mm) – 16 leaf
pricing.
10/12/11 11:22 AM
128
Pads
PDR6050YC
3 1/4” (83 mm) – 7 leaf
Ultra Polishing Pad
industry’s best pressure sensitive adhesive
DAC Vision
that offers the strongest grip especially in a
Hi-Tack for QR II-C base pads
wet envirornment, yet still removes easily
PDR6050NNF 3” (76 mm) – 7 leaf
Masterfine™ Compensated One-Step
PDR6050RF
Pads
DAC Vision
PDR6050YF
when the job is finished. Our Premium Yellow
3” (76 mm)– 16 leaf
Polish pads are a longer lasting polish pad,
3 1/4” (83 mm) – 7 leaf
and now we are offering them in both 3” &
3.25”
Opti-Speed® Wire Mesh Pads
DAC Vision
Protect laps from unnecessary wear. The wire
mesh allows for even distribution of the abrasive compound. All pads are pressure-sensitive for easy application. Standard packaging
250 per box.
ST-587-3 3” round
P800 Grit Masterfine™ Pads have a proprietary coating technique which provides
aggressive cutting action for reduced cycle
times. Excellent surface finish. Ideal for softer
high-index lenses.
P4™ Polishing Pad
DAC Vision
Premium Pink Polishing Pads
Dynamic Labs, Inc.
Superior performance on all plastic lenses.
Special high-density, fibre prevents build-up
in slurry high-retension. 3”, 3-1/4”, 3-1/2”- 7
leaf. 250 pads per roll.
PDR0950N 3 1/2” (89 mm)- 7 leaf
PDR0950NN 3” (76 mm)- 7 leaf
PDR0950P 3 1/2” (89 mm)- 7 leaf
PDR0950R 3” (76 mm)- 16 leaf
PDR0950Y 3 1/4” (83 mm)- 7 leaf
Blue Polishing Pads
Dynamic Labs, Inc.
PDR8010NV 3” (76 mm) - 7 leaf
Dynamic Polishing Pads – with Adhere™
Metal Fining Pads
backing • Backside features Adhere™ - the
DAC Vision
when the job is finished. Our Premium Pink
High-density fiber construction creates
exceptional pad thickness control while add- Dynamic Polishing Pads – with Adhere™
ing strength and uniformity to the polishing backing • Backside features Adhere™ - the
surface.
New fiber technology makes the P4 pad twice wet envirornment, yet still removes easily
as resistant to friction abrasion as compared when the job is finished. Our Blue Polish pads
Easy to remove from the liner. Comes in two to other premium polishing pads. Available in have been an industry favorite for a long time,
different forms, with a lap cover laminated to Low-Tack and High-Tack adhesives for bare and now we are offering them in both 3” &
the metal pad and without the lap cover. The
3.25”
laps or base pads respectively.
lap cover makes it easier to remove the fining
pad once it wears out. Available in plain or Low-Tack for bare laps
DynaPro Dry Polish
grooved. Packaged 250 per box.
PDR0500N 3” (76 mm) - 7 leaf
PDR571 Plain 3” (76 mm) - 6 leaf
PDR573 Grooved 3” (76 mm) - 6 leaf
PDR580 Grooved 3 1/2” (89mm) - 6 leaf
are offering them in both 3” & 3.25”
Premium Yellow Polishing Pads
Dynamic Labs, Inc.
PDR0500P 3 _” (89 mm) - 7 leaf
DAC Vision
PDR 0600Y 3 1/4” (83 mm) - 7 leaf
PDR0600NN 3” (76 mm) - 7 leaf
PDR0600R 3” (76 mm) - 16 leaf
pricing.
Polishing Pads for Plastic
DAC Vision
Features:
• Long slurry life
• Low foaming
A nonwoven base product that is produced to • Easy cleaning
last long polishing cycles.
• Designed for standard & freeform
PDR0400F
A durable, non-woven product that maintains Premium Blue, 3” A woven base product precision cut
consistent thickness and provides excellent flock that provides excellent consistent results.
polishing results.
PDR0405Y, PDR0405N
DAC Vision
surface suitable for AR coating, and now we
Dynamic Labs, Inc.
High- Tack for QR II-C base pads
NEW Velocity™, One-Step Fining Pad
that are designed to yield an ultra smooth
PDR0500Y 3 1/4” (83 mm) - 7 leaf
Natural Mineral Polishing Pads for
Glass
PDR9100F 3” (76 mm) -6 leaf
PDR9100L 3 1/2” (89 mm) - 6 leaf
Polish pads are a longer lasting polish pad
Premium Blue Direct Coat
PDR0900F
Yellow Supreme A special flock on the most durable
backing available, provides excellent surface finish,
particularly on hi-index and polycarb lenses.
PDR7300F
Semi-White, 3” A nonwoven base product that is produced to last long polishing cycles.
Quick Release Processing System
DAC Vision
when the job is finished. Our Premium Yellow
Polish pads are a longer lasting polish pad,
and now we are offering them in both 3” &
3.25”
Advantages:
Axis Blocks
• Longer shelf life
• Less storage space required
Optek
Specifications:
• Average Particle Size 1.7 – 1.9 microns
• pH 3.5 – 3.9
• Baumé 20 - 28˚ depending on mix ratio
• Suspension Treated
2.9 lbs.
Premium Peach Polishing Pads
Dynamic Labs, Inc.
Precision-machined blocks to accurately set
axis on cylinder machines.
Polycarbonate Lenses.
Velocity™ reduces fining times with consistent stock removal leaving an excellent surface quality.
It works on all generator surfaces and pre- Abrasive and polishing pad system that elimivents swarf loading — resulting in fewer swirls nates injuries associated with pad peeling and
and other heat related problems.
increases efficiency by 30-45%. 7 leaf 3/4”
fining and polishing pads. 4 and 6 leaf 3” gripLow-Tack for bare laps
per pads. 250 pads per roll.
PDR6050NC 3” (76 mm) – 7 leaf
4000-316
Glass Polish Pads
Optek
Notched pad, pressure-sensitive, compensated for glass thickness.
7000-70 3” round
10/12/11 11:22 AM
Pads
Blue Supreme Polish Pad
PSI
tems for all plastic, polycarbonate and Trivex
lenses. Pads are 3” in diameter with wings
and come 250 pads per roll.
129
Fining Pads for Plastic (CR-39)
Lenses
PSI
One-Step Pads for Plastic (1.498), Mid-Index
(1.50-1.594) & High Index (1.594+)
Optek Surfacing Pad System
Optek
EL2-11 11 micron, AO film, 7-petal
EL2-15-16 15 micron, AO film, 16-petal
EL2-800 P800, AO paper, 7-petal
The Blue Supreme Polish Pad is an economical pad for resin and polycarbonate materials.
It features a precise thickness to ensure uniform stock removal and a high lens surface
quality. Available in 3” & 3.5” (250 per roll).
Three-pad system for CR-39 lenses, available 347-7 3” Blue Supreme Polish Pad
350-347-7 3.5” Blue Supreme Polish Pad
in rolls of pressure-sensitive, notched pads. Contact PSI for current pricing.
First fine pads are 600 grit. Second fine pads
Easy Lift 2 Base Pad System
remove slightly more than most 2nd fining
PSI
pads, reducing polishing time. A polishing pad
One-Step Pads for Polycarbonate (1.586) PSI recommends the following pads for use
and Trivex (1.53)
on plastic (CR-39) lenses with an index of
refraction of 1.498. We offer both one-step
and two-step fining systems. The MFS15EL2-30 30 micron, AO film, 7-petal
7CSF One-step pad is the 2001 OLA Award of
Excellence Winner for Best in Processing
Tools & Materials.
One-Step Fining Pads – 3”, 250 pads per roll
MFS15-7CSF One-step, 15 micron, AO film,
7-petal
Polish Pads (all materials)
EL2-549-7 Pink Perfection, 7-petal
completes the threesome. Also available, a
1200 grit one-step fining pad. (Price per 100).
7000-441 First fine
EL2-449-7 Yellow Ultimate, 7-petal
7000-443 Polishing pad
EL2-349-7 Ultra (cream), 7-petal
Zinc Glass Fining Pads
The Easy Lift 2 color-coded base pad system
eliminates the strain of pad peeling and
reduces repetitive motion injuries for lab perNotched zinc foil for uniform fine. Pressure- sonnel. The system is made of three components, the semi-permanent color-coded base Contact PSI for current pricing.
sensitive backing.
pad and easy lifting fining and polishing pads.
7000-135
The colored material simplifies lap identifica- Easy Lift Diamond Fining Pad System
tion making it easier to retrieve and re-store
for Glass
laps by the proper base curve, reducing errors
Pads
due to poor lap selection.
PSI
Optek
Colored Base Pads – The non-abrasive colored vinyl base pad material has a multi
directional embossed surface which allows
fining and polishing pads to interlock between
pad surfaces. Propriety adhesives hold the
fining and polishing pads securely to the base
pad during processing while allowing them to
be quickly removed without the use of knives.
Base pads are available in 4-petal for plano to
8 base and 7-petal for 8 base and higher.
BP4-BLU Blue, 4-petal
The Easy Lift Diamond Fining Pad System for
glass offers a flexible configuration that conFirst and Second fine pads for CR39 and poly
forms to high curves. Uniform precision grade
BP4-PUR Purple, 4-petal
and polish pads.
diamond particles assure consistent stock
removal. The average life of the pad is 300BP4-PIN Pink, 4-petal
500 surfaces. 3” pad. 335. Gripper Pads are
Specialty Pads
base pads made for easy release from the lap.
BP7-PIN Pink, 7-petal
OWC
The diamond fining pad and polish pad,
BP4-WHI White, 4-petal
adhere to the base gripper pad. Comes in
three sizes to adhere to any base curve lap.
BP4-GRE Green, 4-petal
180DP4–4 petal, 3” for plano to 8. 180DP6–6
petal, 3” for 8 to 10 diopters. 180DPHC–6
petal, 2-3/4” for high curves. Easy Lift
BP4-YEL Yellow, 4-petal
Diamond Fining System Polish Pad is a
heavy-notched polish pad with no adhesive
Fining & Polishing Pads - Fining and polishing for use on the gripper pads. It is made of
pads are made with high quality 3M abrasives heavy synthetic random weave fiber material.
and Shawsheen polishing materials. Fining 3” pad. 362FG.
Pads are available in one and two-step sys- Contact PSI for current pricing.
SP1000-7CSF One Step, P1000, AO paper,
7-petal
1200-P-3CSF One Step, P1000, AO paper,
7-petal
Two-Step Pads for Polycarbonate (1.586) P800-7CSF One Step, P800, AO paper, 7-petal
and Trivex (1.53)
Two-Step Fining Pads – 3”, 500 pads per roll
EL2-400 First Fine, P400, AO film, 7-petal
321-7 First Fine, 15 micron, SC paper, 7-petal
EL2-15 Second Fine, 15 micron, AO film, P500-7 First Fine, P500, AO paper, 7-petal
7-petal
370-7 Second Fine, 3 micron, AO film, 7-petal
EL2-1000 Second Fine, P1000, AO paper,
370-16 Second Fine, 3 micron, AO film,
7-petal
16-petal
7000-444 Second fine
OWC
16-petal
7-petal
Glass Polishing Pad
PSI
PSI’s glass polish pads are made of a heavy
synthetic, random weave fiber material.
Consistent pad thickness results in uniform
performance. 250, 3” pads per roll.
350-362 3 1/2” pad
362 3” pad
Maize HD Polish Pad
PSI
New manufacturing technologies have produced this highly durable, yet thinner polish
pad that provides crystal clear lenses.
Environmentally friendly, it is manufactured
with natural rubber, less dyes and low density
10/12/11 11:22 AM
130
370-7 3 micron 2nd fine pad
P500-7 P500 grade, aluminum oxide, 1st fine pad
fibers that keep slurries cleaner and reduce
polish carry out. Precision rayon fibers extend
the life of your polish. Durable low-density/
high strength textiles offer a balanced foundation of strength and firmness as well as providing easy application and one-piece pad
removal from the lap. Part numbers: 325649-7, 3.25”, 7-petal for bare tools; 649-16,
3”, 16-petal for bare tools; EL649-7, 3.25”,
7-petal for base pads; EL2-649-16, 3”,
16-petal for base pads.
7-petal
J2000-7CSF One-step, 2000, SC paper, P400-16 First Fine, P400, AO paper, 3”,
16-petal
7-petal
325-P400-7 First Fine, P400, AO paper, 3.5”,
Two-Step Fining Pads – 3”, 500 pads per roll 7-petal
321-7 First Fine, 15 micron, SC paper, 7-petal SP400-7 First Fine, P400, AO paper, 3”,
7-petal
P500-7 First Fine, P500, AO paper, 7-petal
PSI has a two step system to meet the needs
370-7 Second Fine, 3 micron, AO film, 7-petal MFS15-7 Second Fine, 15 micron, AO film, 3”, of your laboratory. All pads are available in 3”
and 3.5”, 7 petal configuration in rolls of 500.
7-petal
Some pads also available in 16 petal. High
MFS15-16 Second Fine, 15 micron, AO film,
16-petal
quality 3M abrasives.
3”, 16-petal
1200-P-3 P1000 micron 2nd fine pad
325-MFS15-7 Second Fine, 15 micron, AO MFS15-7 15 micron 2nd fine pad
339-7 Second Fine, 12 micron, AO film, film, 3.25”, 7-petal
MFS50-7 50 micron, aluminum oxide 1st fine pad
7-petal
P400-7 P400 grade, silicon carbide, 1st fine pad
1200-P-3 Second Fine, P1000, AO paper, 3”, Contact PSI for current pricing.
7-petal
One-Step Fining Pads for High Index
Lenses
PSI
PSI recommends the following pads for use
on high index lenses with an index of refraction of 1.594. We offer both one-step and
two-step fining systems. The MFS15-7CSF
One-step pad is the 2001 OLA Award of
Excellence Winner for Best in Processing
Tools & Materials.
16-petal
MFS15-7CSF One-step, 15 micron, AO film, P800-7CSF One Step, P800, AO paper, 7-petal Contact PSI for current pricing.
7-petal
Two-Step Fining Pads – 500 pads per roll
Two Step Polycarbonate & High Index
MFS50-7 First Fine, 50 micron, AO Film, 3”,
Fining Pads
16-petal
7-petal
P800-7CSF One-step, P800, AO paper, 7-petal
PSI
280-3 First Fine, P280, SC paper, 3”, 7-petal
SP1000-7CSF One-step, P1000, AO paper,
SP280-7
First
Fine,
P280,
SC
paper,
3”,
7-petal
7-petal
1200-P-3CSF One-step, P1000, AO paper,
P400-7 First Fine, P400, AO paper, 3”, 7-petal
7-petal
One-Step Fining Pads for Plastic (CR1200-P-16 Second Fine, P1000, AO paper, 3”,
39) Lenses
16-petal
PSI
Ultra Polishing Pad
PSI
Pad-A-Lap® Metal Fining Pads for
Glass
PSI
7-petal
16-petal
P800-7CSF One-step, P800, AO paper, 7-petal
1200-P-3CSF One-step, P1000, AO paper, on plastic (CR-39) lenses with an index of
7-petal
refraction of 1.498. We offer both one-step
Two-Step Fining Pads – 500 pads per roll
and twostep fining systems. The MFS15-7CSF
MFS50-7 First Fine, 50 micron, AO Film, 3”, Onestep pad is the 2001 OLA Award of
Excellence W inner for Best in Processing
7-petal
Tools & Materials.
280-3 First Fine, P280, SC paper, 3”, 7-petal
280-16 First Fine, P280, SC paper, 3”, 16-petal One-Step Fining Pads 3 , 250 pads per roll
The 449 series pad is designed to meet the
most demanding lens polishing conditions.
Ultra pads have a unique textile base that
provides excellent strength and conforming
properties. The fiber design offers outstanding polish results on all plastic lens surfaces
including polycarbonate. Ultra has been engiThese high quality 3” perforated Zinc alloy
neered to maximize fiber retention during
pads offer 25% faster fines than the solid foil
extended polishing cycles. The natural, rubaluminum pad. The perforation allows for even
ber-based, pressure sensitive adhesive holds
distribution of emery. 250 pads/roll.
firmly in place and provides easy, residue-free
334
pad removal.
SP280-7 First Fine, P280, SC paper, 3”, MFS15-7CSF One-step, 15 micron, AO film, Quantity discounts available.
7-petal
7-petal
Pink Perfection Polish Pad
P400-16 First Fine, P400, AO paper,
16-petal
3”, RED800-7CSF Red Revolution one-step, film,
PSI
7-petal
325-P400-7 First Fine, P400, AO paper, 3.5”, RED800-16CSF Red Revolution, one-step, PSI’s Pink Perfection Polish Pad is designed
7-petal
film, 16-petal
to withstand the extended polish times of cutSP400-7 First Fine, P400, AO paper, 3”,
to-polish systems. This durability and its high
MFS15-16CSF
7-petal
density also offer benefits to labs using tradiMFS15-7 Second Fine, 15 micron, AO film, 3”, 1200-P-3CSF One Step, P1000, AO paper, tional one and two step processing. Varied
7-petal
7-petal
fiber lengths and densities create a pad where
MFS15-16 Second Fine, 15 micron, AO film, P800-7CSF One Step, P800, AO paper, 7-petal dense fibers hold the polish on the pad while
the finer fibers are closest to the lens for
3”, 16-petal
superior surface quality. Shorter cycle times
325-MFS15-7 Second Fine, 15 micron, AO
One-Step Fining Pads For
may be achieved under optimal conditions
film, 3.25”, 7-petal
and in conjunction with the appropriate PSI
Polycarbonate & Trivex Lenses
1200-P-3 Second Fine, P1000, AO paper, 3”,
abrasive pads and quality lens polishes.
7-petal
PSI
Available in 3” & 3.5” (250 per roll).
1200-P-16 Second Fine, P1000, AO paper, 3”,
549-7 Pink Perfection, 3”, 7-petal
16-petal
549-16 Pink Perfection, 3”, 16-petal
449-7 Cream, 3”, 7-petal
350-449-7 Cream, 3.5”, 7-petal
EL2-449-7 Cream 3” winged high tack, 7-petal
Yellow Ultimate Polish Pad
PSI
The Yellow Ultimate Polish Pad features abrasive resistant fibers, which enable the pad to
meet the demand of a longer polishing cycle
EL2-549-7 Pink Perfection, 3” winged, high while minimizing the amount of slurry contamination. Available in 3” & 3.5” (250 per roll).
tack, 7-petal
One-Step Fining Pads For Mid-Index
Lenses
Two Step CR-39 & Mid-Index Fining
Pads
349-7 3” Yellow Ultimate Polish Pad
350-349-7 3.5” Yellow Ultimate Polish Pad
EL2-349-7 3” winged high tack Yellow Ultimate Polish
Pad
PSI
LO Lift Base Pad System
PSI
Satisloh
on polycarbonate (1.586) & Trivex (1.53) lenses. We offer both one-step and two-step fining systems.
on mid-index and Spectralite lenses with an
index of refraction of 1.537-1.556. We offer
both one-step and two-step fining systems.
The MFS15-7CSF One-step pad is the 2001
OLA Award of Excellence Winner for Best in
Processing Tools & Materials.
MFS30-7CSF One Step, 30 micron, AO film,
7-petal
MFS30-16CSF One Step, 30 micron, AO film,
16-petal
MFS35-7CSF One Step, 30 micron, AO film, PSI has a two step system to meet the needs
7-petal
of your laboratory. All pads are available in 3”
321-7CSF One Step, 15 micron, SC paper, and 3.5”, 7 petal configuration in rolls of 500.
7-petal
Some pads also available in 16 petal. High
One-Step Fining Pads – 3”, 250 pads per roll P500-7CSF One Step, P500, AO paper, 7-petal quality 3M abrasives.
321-7 15 micron, silicon carbide 1st fine pad
MFS11-7CSF One-step, 11 micron, AO film, P500-16CSF One Step, P500, AO paper, 365-7 9 micron 2nd fine pad
Non-abrasive, durable base pad with a unique
design for easy application and removal of
fining and polish pads. Special surface design
allows superior contact between working
pads and base pad even when wet – eliminating the need to dry tool. It maintains size
10/12/11 11:22 AM
consistency – eliminating shrinkage and lasts
for 500+ uses – significantly lowering cost per
lens. No chemicals are needed for easy
removal; the adhesive simply loosens in warm
water and pad peels off.
7 petal
70mm 250 pads/roll
76mm 250 pads/roll
85mm 250 pads/roll
P1200 One-Step
Satisloh
Satisloh Polish Pad for Plastic NonAdhesive System
131
Fining Pads
LOH/Coburn Sphere Adapter Block
Superabrasive, Inc.
Precision Tool
Satisloh
Designed for use with the Satisloh Diamond
Abrasive Fining System for Plastic Lenses.
The materials, size and shape have been
selected to provide optimum performance.
Eliminates conventional pressure-sensitive
adhesive application method. The Satisloh
polish pad can be reused for several process
cycles, drastically reducing cost per surface.
These spherical adapter blocks fit inside a
LOH Lens Block allowing center pin polishing.
Satisloh Premium Blue Polish Pad
Satisloh
Premium one-step fining pad for all plastic
lens materials, it provides consistent stock
removal on all plastic materials including mid
and hi index, Transitions, and Spectralite. The
P1200 is pressure sensitive for easy application and removal and can be used as a conventional pad or with the LO Lift Base Pad. It
produces exceptional surface quality with
shortest process times.
6 & 7 petal
76mm 1,000 pads/roll
Satisloh Diamond Fining Pad for
Superabrasive offers high quality generator Block Centers
wheels, fining pads for glass, and a wide variety of wheels for automatic and and hand
Steel Centers
edging machines. Our wheels feature the
Coburn
thickest diamond layer in the industry and
provide a great performance and long tool life.
For pricing and specials, please call 800-987- Easily replaceable centers made from high8403 or email to [email protected].
grade tool steel, hardened and plated.
FINING PADS
Tapered sides provide close tolerance fit.
FP-B-76 METAL BOND FINING PAD FOR GLASS
Packaged in lots of 100.
76mm
FP-B-80 METAL BOND FINING PAD FOR GLASS
80mm
FP-EP-80 Electroplated Pad 80mm
State-of-the-art polishing pad for use on plastics, polycarbonate and hi-index. It features a
unique flock material and adhesive backing
and is constructed of quality materials for
premium polished finish. The unique backing
style provides exceptional tool adhesion and
easy removal - leaving no residue. Thickness:
1.20 mm; Backing; film-style; 500 pads/roll;
sizes: 76, 80, 83, 89 mm; design: 6 & 7 petal.
Axis Gauges
77-6000 Regular, normal diameter, tapered hole.
77-6100 Oversize, larger diameter than 060.
80205-00 Extra long, packaged individually.
OM-83 Cylinder Surfacers Axis
Blocks
Surface Blocking Rings for Glass &
Plastic
Optical Machinery
Satisloh Ultimate White Polish Pad
Satisloh
Glass
Optical Machinery
Extra-long to give quicker and better alignment accuracy. Hardened centers to duplicate
conditions of running a lens. Lightweight with
minimum friction, decreasing pin and arm
torque. Vertical members afford accurate
visual check of axis.
Satisloh
Centers
OWC
Replaceable center for steel and aluminum
Various surface blocking rings for different
blocks.
blocking situations. All can be water-chilled.
Different diameters and different thickness
rings available to meet your blocking needs.
Unique, diamond impregnated fining pad for
glass, capable of processing over 250 surfaces each. This remarkable new development in lens processing technology makes
working with glass as easy as it is with plastic.
Eliminates the need for emery in glass fining.
A smooth surface is achieved in less than two
minutes by simply using a recirculating mixture of water and coolant. Because the LOH
Diamond Fining Pad produces such a smooth
surface, polish time is also greatly reduced.
With short cycle times, extended pad life, and
the elimination of emery, this pad is the most
effective and economical way to process
glass lenses. 3” round, 3-1/4” round, and
3-1/2” round.
Satisloh P800 Fining Pad
Available exclusively from Satisloh, a premium
adhesive pad for polishing plastics, polycarbonate, and high index materials. The filmstyle adhesive backing provides exceptional
tool adhesion as well as easy removal.
Constructed of highest quality flock for quality
polishing. 500 pads/roll; sizes: 76, 80, 83, 89
mm; design: 6 & 7 petal.
White Rhino System
Satisloh
Special polyurethane material produces superior surface quality and optics. Intended for
use with the Satisloh Diamond Fining Pad for
glass non-adhesive system.
Diamond Embedded Fining Pads Glass & Plastic
Sentilles
Satisloh
Back to Back axis sight gauge
PSI Block Center Press
PSI
Precision Tool
The back to back gauge allows a quick, accurate visual inspection of blocked or edged
lens pairs. Any error in blocking or slippage
during edging will be picked up by the parallel
etched lines on the acrylic base. Lines are
etched on both surfaces to prevent errors in
parallax. Available in most edge block
designes.
The PSI Block Center Press is designed to
facilitate the removal and replacement of the
centers from Gerber Blocks. Unit features a
stop collar to minimize handle movement
Overhang Block Adapter
when removing centers from several blocks at
Coburn
a time. Circular bottom plate is designed to
catch centers when punched out. Pressing
Eliminates prism problems when processing
large lenses with considerable decentration. tool included for precise replacement of cenMultiple countersinks permit an almost infinite ter along with four extra dowel pins.
positioning of pins to nullify the prism induc- 386
ing overhang.
Block Adapters
8253700
LOH/Coburn Prism Adapter Block
Replacement Centers
PSI
Precision Tool
One step compensated fining pad. Silicon
carbide abrasive for consistent smoothing of
spherical and toric plastic lenses in
Rx-production. Consistent stock removal on
all plastic materials. Low fining times and
pressures and can be used with base pad
system. Available in 6 & 7 petal configuration
and in 76, 80, 83, 89 mm.
GLASS LENS; Diamond Fining Pads are manufactured with Diamonds through pad thickness. Lens is fined with water only, until pad is
completely used -providing a very long pad
life, reducing surfacing cost. Each Pad fines
400 to 450 Lenses. PLASTIC LENS : Diamond
Fining Pad are manufactured slightly different,
diamond impregnation goes through pad. Used with LOH Lens Blocks, these adapter
Yield is 250 to 300 lenses per pad. Use pad blocks facilitate off-center as well as on-cenwith a gripper pad.
ter polishing with Gerber equipment. They
6-6760 Diamond Fining Pad 3.0” (76 mm) - for GLASS
have the same standard prism configuration
6-6800 Diamond Fining Pad 3.25 (80 mm) - for GLASS
as Gerber Blocks. Both the pins and inserts
6-6802 Diamond Fining Pad 3.25 (80 mm) - for
are made from high quality stainless steel.
PLASTIC
Fit all blocks. Come in packages of 100.
Recommended for use with the PSI Block
Center Press.
3773
10/12/11 11:22 AM
132
Non Alloy Blocking Material
Block Material
OWC
Metal Blocking Alloy
DAC Vision
4 sheets to the gallon
P/N GWAX
Red Blocking Wax
High-quality alloy that may be used successfully in all machines. Melting points: 158, 136,
138, and 117. Inquire for information on
reclaim service. Due to price fluctuations,
metals will be sold at current market prices.
OWC
pricing.
Wax
DAC Vision
20 squares to the gallon
P/N Gwax
lens. This provides an even layer of blocking
metal for uniform heat distribution. Made from
high-quality aluminum for fast dissipation of
heat from the lens. Precision-machined for
accurate thickness control and hard-anodized
for long life. Available in the range of sizes and
curves shown below. Sold in 4 packs only.
55mm Diameter:
0.50 Base Curve 30015-04
10.00 Base Curve 483-04
12.00 Base Curve 484-04
14.00 Base Curve 485-04
2.00 Base Curve 30016-04
4.25 Base Curve 30017-04
6.25 Base Curve 30018-04
8.25 Base Curve 482-04
63mm Diameter:
10.25 Base Curve 30063-04
3.25 Base Curve 30028-04
4.25 Base Curve 77-25704
5.25 Base Curve 30029-04
6.25 Base Curve 77-25804
7.25 Base Curve 30175-04
8.25 Base Curve 77-25604
68mm Diameter:
0.50 Base Curve 30002-04
10.25 Base Curve 30064-04
2.25 Base Curve 30003-04
4.25 Base Curve 30004-04
6.25 Base Curve 30005-04
8.25 Base Curve 30006-04
Lenticular Aspheric Bifocals Block 55mm Diameter:
12.00 Base Curve 30019-04
14.00 Base Curve 30020-04
Super-flex blocks
Blocking Rings
Precision Tool
Coburn
Designed to work on all lenses, the super-flex
has the conformability to match any curves. Sealing Rings:
Available in the weco style in open or solid
center design. Choose from either 1 pin or 3 Made especially for use with the Coburn
Releases easily and cleanly from lens and
blocking system. They have “engineered in”
pin configuration.
flexibility to ensure an adequate fit for the
block. Removes in slab form, not pieces. Contact Precision Tool for current pricing.
many sizes and variations of lens contours.
Conveniently packaged in 4” x 4” x 1⁄2” slabs
So-Lo Alloy
Available for use with 14-00 water rings in the
for easy application with popular wax blockheights and hardnesses shown below.
PSI
ers. No need to drain current wax. Available in
9894-00 Short Hard Ring
9897-00 Short Soft Ring
blue and red.
DV-098G Red wax cake
9898-00 Tall Soft Ring
9899-00 Extra Tall Soft Ring
DV-097G Blue wax cake
Water Rings:
pricing
Opt-Alloy
Optek
Premium-grade, low melting-point alloy.
Provides firm bond and easy removal.
Reusable and will work in all alloy blockers.
Available in 117°F and 136°F for plastic and
158°F for glass. Cast in approximately 2-1/2lb
(1.13kg) bars.
Alloy
OWC
Blocking Rings
Precision Tool
For blocking small diameter lenses or highplus curve prescriptions. Ring is available in
plastic or stainless. Call for diameter needed.
Disposa-Blocks®
PSI
Durable, disposable blocks with no centers to
replace. Constructed of hardened steel alloy
to resist nicks and dents. Easy-to-read axis
lines. 43mm diameter.
3128 8 Base
3128OP 8 Base for Optek
Composit Blocks - 43mm
Sentilles
A wide variety of types and sizes of lenses can
be blocked using water and sealing rings. The
water ring provides quick cooling of the mold, COMPOSIT BLOCKS : molded with a mixture
thereby speeding the blocking process.
of stainless steel and fiberglass, making them
77-1700 43mm water ring
very durable and light weight. Blocks are
43MM and available with molded centers,
Premium-grade, low melting-point alloy.
Glass Lens Blocks
making them disposable Alsoavailable with
Provides firm blocking of lenses, and easy
replaceable stainless steel centers. The third
removal. Can be used in any blocking system.
Coburn
117°F, 136°F, 140°F, 158°F. Average 3lb bars.
way available are Inserts, without molded or
Regular concave 43mm blocks for use with steel centers, for blockers that cast an alloy
LENS Blocking pads
14-00 water rings. Available in a range of base center each use.
330-17999 Insert 43 mm no centers 4 to 8 base-for
curves: Sold in 4 packs only.
Vigor Optical
alloy CMV 330,335 & 485
The solution for all types of coated lens edging. Specifically designed for use on hydrophobic slippery lens and AR coatings. This
pad will not slip, twist or wrinkle, eliminating
the need to stock several different pads.
Available in 2 sizes: 83.203 Half Eye Pads
17mm x 24MM and Full eye 24mm round.
1000 per roll. . . . . . . . . . . . . . . . . . . . . . . $87.00
Concave 43mm Diameter:
12.00 Base Curve 77-104
14.00 Base Curve 77-11804
18.00 Base Curve 77-11904
4.00 Base Curve 77-16604
6.00 Base Curve 77-16704
8.00 Base Curve 77-16804
Convex, thick 43mm:
4.00 Base Curve 77-4604
6.00 Base Curve 77-4704
Convex, thin 43mm (used with 18-00 water rings):
336-17999 Block 43 mm Molded centers, 2 to 10 Base
CMV 336 Blocker
99-0060 Centers Hardened for Composit , Aluminum &
Coburn type blocks
99-17899 Block 43 mm w / SS Centers 0 to 12 base alloy or wax blocking
99-17999 Block 43 mm Molded Centers 0 to 12 base alloy or wax blocking
Block Tools
Fiber Rings
Socket Setter
OWC
Optek
Block Rings
Aluminum Blocks
Coburn
Developed to CoburnSystem™ specifications
High grade, reusable alloy. Availble in 117 to enhance the processing of plastic and
degree, 140 degree and 158 degree melting polycarbonate lenses. The larger diameters
ensure support for thin edges while the cavity
point.
is designed to match the base curve of the
P/N 0023 9mm
P/N 82548 6mm
Prism rings available also
Replaces sockets in lens blocks. Provides a
means for seating either all three or the outer
two sockets to the same depth.
2000-200
10/12/11 11:22 AM
133
Tapes for Wax
PSI-1402 Hot Knife w/Blades
S92262 Clear Tape for Wax Blocking
DAC Vision
Optical Machinery
OWC
3M SURFACE SAVER II BLOCKING
TAPE
Coburn
The electrically heated 2-sided blade cuts Contact OWC for current pricing.
These tapes are designed to protect the front
quickly and evenly around the lens without
WSS-C Tape Dispenser
of lenses from being blocked with wax.
sags; blade does not dull; easy to use. 110
OWC
Particularly important for high-index and poly- volts.
carbonate lenses. Good conformity to lens, SA-9942 Surface Saver Knife Handle
Surface Saver II is a highly conformable yet removes easily and cleanly. Clarity of tape SA-9944 3M Surface Saver Knife **Blades (pkg-5)
blocking tape featuring an advanced adhesive makes layout easy.
that resists adhesive transfer upon removal.
3M Surface Saver Applicator
Surface Saver II is linerless, making it easy to ST-4006 Clear (More Aggressive)
apply and eliminating the mess and disposal
OWC
ST-4712 Clear (Less Aggressive)
of liner paper.
290001
3M Surface Saver Clear Tape # 1663 (72 yards)
pricing.
8050300
3M Surface Saver II #1640 – stronger adhesion
strength (50 yards)
8478700
3M Surface Saver II #1641 – normal/standard adhesion strength (50 yards)
Dynamic Labs Super Saver Tape
Air operated to apply uniform tape to the lens.
Equipped with hot knife for cutting out taped
lens. 9”h x irregular 7”w x 19”d (23cm x 18cm
x 48cm), 22 lb (10kg). 110V, 1.5A. Air required.
Dynamic Labs, Inc.
3M Surface Saver Accessories
8047901
Knife Handle
8048800
3M Surface Saver Blades (5/pkg)
WSS-CL Tape Dispenser
Uniformly applies surface saver tape to protect the lens surface from heat and scratches
while processing. 7”h x 8”w x 20”d (23cm x
48cm x 18cm). 28lb.
SURFACE BLOCKING TAPE
Coburn
OWC
Economy Surface Tape Applicator
Dynamic Labs Inc. offers a full line of high
quality, low cost surface saver tapes for all
blocking materials. We offer both with and
without liner for those people that prefer them
in both clear and translucent blue
OWC
Uniformly applies to surface saver tape to
protect the lens surface from heat and
scratches while processing. Unit supplied
with knife for cutting out taped lens. 10”w x
19”d x 10”h. 24lbs. 110V/1.5 amp with hot
knife. Requires separate air source.
355 Surface Tape Applicator
Safeguard PLUS™ incorporates the latest
development in film manufacturing technology to provide an economical product, which
exhibits strong adhesion to a variety of lens
materials and surfaces without wrinkling. It
allows for easy deblocking, high curve conformance, durable abrasion resistance, consistent color, and exceptional thermal protection
for today’s expensive high-end lenses.
8215002
Safeguard PLUS™ (36 yards)
8215900
Clear Tape – Venture 451 (36 yards)
8216900
Nu-clear Linerless Blocking Tape (Freebond only) (72
yards)
Tapes for Alloy
DAC Vision
Optek
3M Surface Saver™ II Tape
Phantom
A space-saving economical dispenser that is
manually operated. Hot knife is used to cut
out shape. 9”h x 18”w x 12”d (18cmm x 20.3c
x 30.5cm). 22lb (5kg).
Leap II PSC Tape
OWC
The 355 taper uses a simple and efficient
mechanical process to ensure that the protective tape is applied smoothly—even on high
curve lenses! Key Features: Quick and easy
two-step operation - Included curve-bladed
knife easily cuts tape - Uses a variety of tape
media
New surfacing tape from 3M prevents adhesive transfer and is gentler on ink markings. It
doubles the tape of the standard Surface
Saver Tape, since there is no lining to remove.
Specifications
3M Surface Saver Tape
Size: 11” W • 23” D • 20.5” H
PSI
Weight: 28 lbs
3M-1645 Lens Tape Applicator
Optical Machinery
These ideal transparent blue tapes are
designed to protect the front surface of all
optical lenses. DAC Tapes offer excellent
thermo protection due to its 5 mm thickness.
Proven to have excellent conformability to the
lens, DAC Tapes actually offer superior hold
on coated lenses.
P/N S91256
Lens Surface Tape
OWC
ST-4004 Eurolens
ST-4005, DAC Tape
ST-4007 DAC Tape II
3M surface saver applicator smoothly applies
tape to lens to protect surface during pro- Excellent protection for lens surfaces.
S92259-01
Contact DAC Vision or DAC Edge for current cessing.
pricing.
ST-4009 Clear
3M Surface Saver Tape is recognized as the
most effective method to protect lenses
throughout the surfacing process. This tape
protects from dirt, heat aberration and
scratches, without any adhesive residue on
the lens. Available in rolls 50 yards long and 4”
wide.
1640 plastic
1641 glass
10/12/11 11:22 AM
134
PSI Green Len Saver Tape
PSI
3M™ Surface Saver™ Tape
Applicator
Signet Armorlite
Automatic Surface Tape Applicator
Operated by air pressure, the 1645 Applicator
with liner take-up reel applies surfacing tape
uniformly across the front lens surface. 7”h x
8”w x 19”l. 35 lbs.
PSI
Blocks
Provides high performance and outstanding
visibility of lens markings, especially on camera assisted blocking systems. Offers excellent adhesion but is easy to remove and
deblock without residue. Designed to be
used with alloy or wax on all lens materials
and curves without wrinkling. Tapes 275-300
average sized lenses. Part #1005
The Automatic Surface Tape Applicator
(ASTA) increases throughput and reduces
labor costs. The dual lens unit can tape up to
300 pair of lenses per hour with a 12 second
load and evacuation time. It offers dual lens
operation as well as right or left lens operation Contact PSI for current pricing.
PSI Tape
for flexibility. Works with liner or linerless tape.
A manual feed button makes tape loading
PSI
easy. A photoelectric sensor eliminates the
need for calibration. Available with variable
(55-82mm) or fixed cutting head (82mm).
V2A-03 Dual Lens ASTA
Hot Knife
PSI
PSI Tape is a high quality transparent lensaver
tape that protects the front surface of the optical lens during the surfacing procedure. Fits
into any lab environment currently processing
CR-39, high index, polycarbonate and glass
lenses. Comparable to any high end lensaver
tape at a competitive price. The rolls are 36
yards long by 4” wide. Blocks 275- 300 average sized lenses. 4” wide.
A quick and efficient way to cut lens tape. The 1007 36 yds.
electrically heated 2-sided blade cuts quickly 1007-1 72 yds.
around the lens without snags. The 2-sided Contact PSI for current pricing.
blade does not dull and is very simple to use.
The Tape Dispenser
120V. Single phase.
1401
1404 Replacement Blades
PSI
Lens Performance Tape
ACUBLOCKS FOR STEP ONE &
ECLIPSE
Quality and precision manufacturing make
these blcoks the only choice. Every block in
Coburn’s Acublocks utilize a unique axis “bar” stock, every time. Are you looking for a block
which eliminates the need for pins and cen- that’s not listed? Just let us know, and we will
ters, dramatically reducing the cost and time supply it right away.
spent on block maintenance. The tapered Contact OptiSource for current pricing.
block design simplifies operator loading into
Chiller Plate
generators, finers, and polishers. The block
Precision Tool
design in conjunction with the “compliant
adapters” on finers and polishers exerts uniform pressure around the entire circumference of the block and lens, resulting in more
precise optical center placement and
improved optics. Acublocks support loading
and unloading of lenses into generators. 10
blocks/pkg.
3174000
Red – 2 base
3174100
Blue – 4 base
3174200
Gray – 6 base
3174300
Gold – 8 base
3174400
Green – 10 base
3174501
Minus front curve block (1/pkg)
Coburn
Signet Armorlite
PSI Clear Tape
PSI
OptiSource
Coburn
A compact and economical dispenser that is
manually operated and will apply tapes with
virtually no wrinkling, even on high-curve
lenses. 7”h x 8”w x 12”l and is supplied with a
Coburn’s block racks hold up to 60 blocks on
hot knife. 110V, single phase.
Compatible with any lens taping system. This 390A
each level. The durable plastic trays contain
tape has superior elasticity and may be used Contact PSI for current pricing.
drainage holes for fast block drying. The tray
with glass or plastic lenses. Also provides
channels are contoured to protect blocks from
3M™ Surface Saver™ Plus Tape
damage.
excellent heat protection.
1400 36 yds.
1400-1 108 yds.
Blocking considerations:
00022 9mm Fiber Ring
00022-6 6mm Fiber Ring
00023 Ultex Fiber Ring
00024 Cylinders Fiber Ring
00025 3mm Plano Fiber Ring
00027 9mm Ring w/ cut-out
00027-6 6mm Ring w/ cut-out
82547 6mm Thick Fiber Ring
82548 6mm Ring w/ cutout
Metal Blocks
BLOCK RACKS
PSI
nicks and dents; easily read axis lines.
172901
Double block rack of wire and plastic
172921
Single block rack of wire and plastic
239039
Double block rack of wire and plastic – for use with
Acublock blocks
Precision’s aluminum chiller plate assures
quick transfer of heat from your blocks to the
water-cooled plate. Plate measures 10” x 12”,
is powder-coated black and hooks to your
water supply.
Coburn-Style Blocks
Precision Tool
Now available from Precision Tool
Technologies, 55mm Coburn-Style alloy
blocks. Detailed engraving allows for quick
identification. All blocks are hardcoat anodized for extended wear. Indexing lines are
located at 0, 90, and 180 degrees for fast,
accurate layout. Base curves 0.50, 2.00, 4.25,
6.25, 8.25, 10.25, and 12.00.
Eclipse Style Blocks
Precision Tool
PSI-3128-8 Disposa-Block Surface
Blocks
Optical Machinery
PSI Clear Tape is designed to be used in laboratories that are using tape when blocking
with a wax blocking system. Clear tape provides the front lens surface added protection,
lowering reject rates due to front surface
scratching. Available in rolls 36 yards long by
4” wide.
#1006
Highly conformable surfacing tape that prevents adhesive transfer while being kind to
lens ink markings. Packed 12 to a case, each
roll has a liner and contains 50 yards. Available
in two adhesion levels: 1640 Higher Alloy
Adhesion and 1641 Medium Alloy Adhesion.
And for non-alloy blocking systems, use linerless 3M 1663 Clear Protective Surfacing Tape,
packed in cases of 6 rolls of 72 yards each.
This clear tape keeps the lens surface free of
contaminants, like wax and oil, that interfere PSI-3128-8 Disposa-Block Surface Blocks
with the uniformity and adhesion of surface
Durable, disposable blocks; no replaceable
coatings like A.R.
centers; made of hardened steel alloy to resist
Precision’s Eclipse Style Gerber Blocks are
designed for the Eclipse Blocking System.
These blocks allow lenses to be generated
down to 45mm in diameter. They are machined
from air-craft grade aluminum to very strict
tolerances and anodized to provide long life.
Choose from 3 styles: Plano, 3-base, and
6-base.
10/12/11 11:22 AM
Blocks
Foam Away Defoamer
Nu-Cool Blue Edger Coolant
A.I.T. Industries
OptiSource
Brushes
LOH Wax Blocks
Rouge Brushes
Precision Tool
Coburn
Precision LOH blocks for wax blocking are
machined from Aircraft-grade Aluminum Bar
Stock to the highest standards. Available in: 100% pure bristle brushes.
(A) Red, 0.5 Diopter; (D) Blue, 6 Diopter; (F) 996800 No. 4, 3/4” wide.
Gold, 8 Diopter; (G) Green, 10 Diopter.
Brushes
Perfect Power Blocks
DAC Vision
Precision Tool
135
An economical, effective defoaming agent to
reduce excessive foaming from the lens genOptiSource has done it again by developing
eration and edging. Sold by the case or bottle.
an environmentally friendly, chemically
70005 (1) 16oz. Bottle
SUPERIOR Edger and Generator Coolant…
A01478 (4) 16oz. Bottles
Nu-Cool Coolant. Nu-Cool Coolant eliminates
foam-overs FOREVER with its built-in defoamer! Our proprietary corrosion inhibitor requires
BPI® Diamond Saver™
you to change your edger bucket less frequently and prolongs wheel and machine life.
BPI
No need for a costly separate defoaming
product. Packaged in a 1-gallon, EASY to
pour container. RISK-free GUARANTEE! If
Nu-Cool does not minimize or eliminate your
foaming problems, OptiSource will send you
OptiSource’s Industrial Strength Defoamer
FREE.
99-COOL
Nu-Cool Blue Edger Coolant (Quart)
Fine quality brushes with metal ferrules.
A major improvement on the LOH block, ST-361 Natural bristle, medium oval, No. 4, per doz.
Precision Tool’s Perfect Power Block saves on ST-362 Natural bristle, large oval, No. 6, per doz.
alloy and, more importantly, improves lens Contact DAC Vision for current pricing.
quality. This is accomplished by raising the
Brushes
center area of the block assuring lens support
Vigor Optical
and decreasing alloy thickness to eliminate
uneven alloy contraction during cooling.
Choose from 4 graduated blocks: Red (-)1 to
1, Gold 1 to 3, Purple 3 to 5, Clear 5 to 7. Also
available for concave front lenses.
Precision Gerber Lens Blocks for
Alloy
Precision Tool
For applying Rouge and emery slurry. Made of
pure Black bristles set in seasoned wood
handles. Seamless metal bands hold bristles
firmly. 2oz.
16.292. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.50
Fiberglass Scratch Brush
Vigor Optical
Precision-machined from Aircraft Aluminum
Bar Stock to exacting tolerances. These
blocks are identical to our other Gerber style
blocks except the face is specially machined
to block with alloy. 4 holes and a keyed groove
hold the alloy fast. Available in (A) Red, Plano;
(B) Blue, 3 Diopter; (C) Grey, 6 Diopter; (D)
Gold, 7.5 Diopter; and (F) Green, 11 Diopter.
Also available with hold fast groove for wax
blocking.
Oversized Blocks
PSI
OptiSource
Regular use of the heat dispersing and high
lubricating qualities of BPI® Diamond Saver™
prolong the life of your diamond wheel.
Foaming is minimized. BPI® Diamond Saver™
can also be used for generating lenses.
# 70800 Qt.
# 71700 Gallon
OptiSource has done it again by developing
an environmentally friendly, chemically
SUPERIOR Edger and Generator Coolant…
Nu-Cool Coolant. Nu-Cool Coolant eliminates
foam-overs FOREVER with its built-in defoamer! Our proprietary corrosion inhibitor requires
you to change your edger bucket less frequently and prolongs wheel and machine life.
No need for a costly separate defoaming
product. Packaged in a 1-quart, EASY to pour
container. RISK-free GUARANTEE! If Nu-Cool
does not minimize or eliminate your foaming
problems, OptiSource will send you
OptiSource’s Industrial Strength Defoamer
A broad spectrum de-foamer that controls FREE.
99-COOLQ
foam build-up during glass and plastic surfac- Contact OptiSource for current pricing.
ing operations and wipes out foam in edgers.
Coolant
BPI
Made of flexible glass fibers, especially useful # 40211
for removing rust spots and for polishing hard Contact BPI for current pricing.
to reach areas. Retractable fibers prevent
DACKool Plus
injury to fingers. Measures 43/4” long. Refills
are easy to insert.
DAC Vision
OWC
16.332. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.00
16.333. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.50
Coolants
Aqua Diamond Coolant
Super-efficient coolant for water-based glass
and plastic lens generation. Extends diamond
life.
A.I.T. Industries
Edger/Generator Coolant
Unique formula provides excellent lubrication
and heat resistance, protecting today’s high
performance cutting tools. Its low-foaming,
rapid settling formulation keeps lens surfaces
clean and free of debris. Its advanced rust
inhibitors prevent build up and make tank
clean up easier. It works well in any system,
especially smaller units where agitation is
high.
Phantom
PSI’s Oversized Blocks offer large diameters
to ensure support for thin edges. The cavity is
designed to match the base curve of the lens
Increase diamond wheel life and protect your
providing an even layout of blocking material
machinery from rust. Aqua Diamond Coolant
for uniform head distribution. Made of alumiwill help keep your diamond wheels sharp and
num. For use with plastic lenses.
free-cutting while eliminating the need for a
3115 4.25 base
separate defoamer. Packaged in 6 oz. plastic
3135 6.25 base
bottles, thus eliminating the need to measure. Contact DAC Vision or DAC Edge for current
3140 8.25 base
An environmentally safe, water-soluble, nonA01477 (24-6 oz. bottles)
3145 5 base
pricing.
foaming, lens grinding concentrate, specifiA01477B (12-6 oz. bottles)
3150 2 base
cally formulated to provide lubrication, coolContact DAC Vision for current pricing.
10/12/11 11:22 AM
136
ing and rust prevention when grinding glass,
plastic, or photochromic lenses. Prolongs the
life of the diamond wheels and tools. Mix one
part concentrate to 80 parts water for edger
coolant. Mix one part concentrate to 40 parts
water for generator coolant.
QCD Configured Glass Generator Wheels:
Coolants/Slurry Additives
BPI
C470 Quart
C472 Gallon
C474 5 Gallon
Dry Coolant
A broad spectrum de-foamer that controls
foam build-up during glass and plastic surfacing operations and wipes out foam in edgers.
# 40211
No-Foam™
1575 1 lb. bottle
PractiCool
PSI
BPI
A broad-spectrum defoamer that controls
foam build-up in glass and plastic surfacing
operations and wipes out foam in edgers. An
economical and readily dispersible solution to
excess foaming problems.
General purpose water-based concentrate for
generating and edging.
8019170 Blue diamond (gal)
8019370 Lens Grind (gal)
CR-39, hi-index, polycarbonate and plastic
laps without a tool change. It fits Optek equipment. 3/4” insert.
Diamond Generator Wheels
Optical Machinery
Wet Generator Diamonds
2 inch
3 inch
3-1/2 inch
A durable, non-woven product that maintains 4 inch
consistent thickness and provides excellent Bonded, Plated, Tiger or Zipper
polishing results.
PDR9100F 3” (76 mm) -6 leaf
PDR9100L 3 1/2” (89 mm) - 6 leaf
Ultra Polishing Pad
Ask for availability.
11262-00 Polycrystalline Diamond
Cutter Blade (IQ Generator)
DAC Vision
OWC
Coburn
Superior performance on all plastic lenses.
Special high-density, fibre prevents build-up
in slurry high-retension. 3”, 3-1/4”, 3-1/2”- 7
leaf. 250 pads per roll.
90850 Diamond Cutter (Vista 2G)
Satisloh LH-205 Coolant
Foam-control product suited for fining and PDR0950N 3 1/2” (89 mm)- 7 leaf
PDR0950NN 3” (76 mm)- 7 leaf
polishing slurries.
0462-60 32oz.
0462-70 128oz.
Coburn
OWC
PDR0950P 3 1/2” (89 mm)- 7 leaf
PDR0950R 3” (76 mm)- 16 leaf
PDR0950Y 3 1/4” (83 mm)- 7 leaf
Optek
Excellent for CR-39, hi-index and poly lenses
Bonded Diamond (Glass). Diamond wheels as well as plastic laps. Provides smooth surare manufactured to exacting standards for face finish and long life. Retruable.
use on Optek generators. The grit concentraContact OWC for current pricing.
tion and bond are designed for maximum
performance. Concentricity is precision
L113DP 3D Disc Cutter (LOH)
machined and stick out length uniform for
OWC
easy change for wheel sizes.
Manufactured to exacting specifications. The
diamond grit size, bond and concentration are
specifically selected for maximum performance and life. Concentricity is held to precise tolerances to ensure smooth operation.
Wheels listed with a “special bond” are recommended for both photochromic and White Products are listed by Part No., Dia., Length,
glass grinding.
Mesh
Maximum Curve Reference Chart: Maximum
obtainable curves for the different diameter
wheels available. (Information based upon
1.530 Index.): 2” Nominal Diameter - 20.00D;
3” Nominal Diameter - 14.00D; 3-1/2” Nominal
Diameter - 11.00D; 4” Nominal Diameter 9.50D.
significantly greater life than carbide. It cuts
Rocket-Lite Foam Go
1600G gallon pail
1600P 5 gallon pail
The Polycrystalline Diamond Cutter has a
Glass
Coburn
Fully synthetic coolant specifically designed
for ophthalmic lens processing. Provides
exceptional micro coating of all swarf, including polycarbonate, preventing swarf build-up
in both the cutting chamber and coolant system. It provides superior quality lens finishes
and extends tool life and works inSatisloh/
Bazell central systems as well as all conventional coolant systems. Anti-fungal agents
prevent fungal and bacterial growth in complete circulation process while its free-rinsing
formulation prevents sticky film build-up on
lenses as well as machine tools.
Glass Wheels:
Glass/Plastic 3-1/2”d x 3-1/2”l (Special grit), Wet Cut,
10559-00
Lub. Impregnated Glass 3-1/2”d x 3-1/2”l (105 grit),
Wet Cut, 9350-00
Plastic Wheels:
Hard Resin 3-1/2”d x 3-1/2”l (40 grit), Wet Cut, 1117700
Hard Resin 3-1/2”d x 3-1/2”l (46 grit), Wet Cut, 1935400
Poly/Hard Resin 3-1/2”d x 3-1/2”l (30 grit), Dry/Wet
Cut, 11178-00
DAC Vision
Coburn Lens Grind Coolant
Satisloh
Glass Wheels:
Lub. Impregnated Glass 3-1/2”d x 3/4” diamond
length (105 grit), Wet Cut, 10569-00
Plastic Wheels:
Hard Resin 3-1/2”d (40 grit), Wet Cut, 11187-00
Poly/Hard Resin 3-1/2”d (30 grit), Dry/Wet Cut, 1118800
Natural Mineral Polishing Pads for
40200 Quart
40301 Pint
Coolant designed specifically for the optical
industry. PractiCool is a biodegradable, fully
synthetic water-soluble coolant for plastic and
glass lens generating and edging. It does not
contain oil. Provides superior lubrication and
corrosion protection. Contains a special polymeric additive, which provides for rapid swarf
settling for cleaner running coolant. Nonfoaming.
Optek
Standard Configured Generator Wheels:
PSI
PSI’s Dry Coolant is ideal for labs wanting to
cut down on shipping costs and/or storage
space in their labs. This highly stable freezedried powder contains descaling additives to
remove build up and swarf residue on edgers
and generators. With an indefinite shelf life,
this coolant is easy to use, consistent, messfree and always fresh. One pound of dry coolant can make up to 100 gallons.
Polycrystalline Diamond Cutter
Dramatically improves productivity by reducing down time during diamond wheel changes. QCD permits quick changes from glass to
plastic and from glass to glass.
80000-949 2”, 3-1/2”, 100
8000-551 3-1/2”, 3-1/2”, 40
8000-552 3-1/2”, 3-1/2”, 100
8000-944 3”, 3-1/2”, 40
8000-945 2”, 3-1/2”, 40
8000-946 3-1/2”, 3-1/2”, 30
8000-947 4”, 3-1/2”, 40
8000-948 3”, 3-1/2”, 100
10/12/11 11:22 AM
3D Disc Cutter for V50 & V75
Generators
Satisloh
Plastic Generator Wheels
OWC
COBURN - Quick Change
LOH-90-BR-30 LOH GENERATOR WHEEL BRAZED
Funnel Shape -QC Straight Shank 3 Inch
1212-2004 Glass
1212-2005 Glass/Plastic
1311-2130 Poly/Hi-index/Cr39
1311-2140 Cr39 Only
Funnel Shape -QC Straight Shank 3.5 Inch
1212-3004 Glass
1311-3140 Cr39 Only
Funnel Shape -QC Straight Shank 4 Inch
1212-4004 Glass
1311-4140 Cr39 Only
LOH-90-EP-35 LOH GENERATOR WHEEL
ELECTROPLATED FOR POLY/PLASTIC 90mm
LOH-90-GL LOH GENERATOR WHEEL FOR GLASS
90mm
SHURON
SHU-3.5-BR-40 SHURON GENERATOR WHEEL
BRAZED FOR POLY/PLASTIC 3.5in
SHU-3.5-BR-40 SHURON GENERATOR WHEEL FOR
GLASS 3.5in
COBURN -FB OPTICAL - STRAUSSBAUGH
24 grit
S93235 3-1/2” dia.. . . . . . . . . . . . . . . . . . . . . . .
36 grit
S93233 4” dia. . . . . . . . . . . . . . . . . . . . . . . . . . .
S93234 3-1/2” dia.. . . . . . . . . . . . . . . . . . . . . . .
46 grit
S93222 3-1/2” dia.. . . . . . . . . . . . . . . . . . . . . . .
S93230 2” dia. . . . . . . . . . . . . . . . . . . . . . . . . . .
S93232 4” dia. . . . . . . . . . . . . . . . . . . . . . . . . . .
Quick Style
S93290 2” dia. . . . . . . . . . . . . . . . . . . . . . . . . . .
S93291 3” dia. . . . . . . . . . . . . . . . . . . . . . . . . . .
S93292 3-1/2” dia.. . . . . . . . . . . . . . . . . . . . . . .
Special diamonds on request.
$395.00
$445.00
$395.00
$445.00
$395.00
$445.00
$395.00
$395.00
$395.00
Generator & Edger Wheels
PSI
Disc cutter with polycrystalline insert tips for
generating toric and spherical plastic and
polycarbonate lenses in RX-production on
Satisloh V50 & V75 Series Generators. These
tools are also able to generate aluminum or
plastic tools for smoothing and polishing,
have a very long lifetime and a low cutting
force–thus reducing deformation. Generating
process with predetermined cutting geometry.
92-000-914 Body, large w/o disc, T70
92-000-915 Tool Body only, T66L
92-000-916 Tool Body only, w/o 4 insert tips, T33
92-000-918 Diamond disc (D357), T 32, CR-39, hi
index
92-000-921 Diamond disc (D357), T66, CR-39, hi index
92-002-738 Cutter, 3D Disc, w/8 bits, T66, Organic
92-002-740 Cutter, 3D Disc, w/8 bits, T66, Aluminum,
plastic, and disposable lap tools
3D Disc Cutter for V95 Generators
Satisloh
137
Funnel Shape -Taper Shank 3 Inch
1212-2001 Glass
1311-2040 Cr39 Only
Funnel Shape -Taper Shank 3.5 Inch
1212-3001 Glass
1311-3040 Cr39 Only
Funnel Shape -Taper Shank 4 Inch
1212-4001 Glass
1311-4040 Cr39 Only
Dressing Sticks
Generator Honing Sticks
Coburn
Quickly removes glaze and foreign matter to
renew and recondition all diamond wheels
except plated wheels used for plastic lenses.
6” (15.25cm) long. Other honing sticks available.
LOH Generator (Inside coolant feed)
Dom- Slots GL / FlatH Hub PL/PLY 90mm
1242-3001 Glass
1341-8030 Cr39 Only
Slotted Dome Hub 90mm
1242-4001 Glass
V Series Disc 2.75 Inch
1242-80100 Glass
984700 White coarse, 150 grit
992200 Black coarse, 150 grit
Dressing Sticks
DAC Vision
SHURON 290, 390, 490, 790
HUB SHAPES:>(Bell-W/Deep
(Dome-like Bell w/flat ID)
A complete line of Abrasive Technologies
competitively priced edger wheels and conventional hub generator wheels feature the
standard diamond metal bond. The plastic
wheels have a special patented, long-lasting,
bonding system. Faster cutting, longer-lasting
and cooler cutting.
3D Disc Cutter for V100 Generators
Satisloh
Satisloh V95 Generators. These tools are also
able to generate aluminum or plastic tools for
smoothing and polishing, have a very long
lifetime and a low cutting force–thus reducing
deformation. Generating process with predetermined cutting geometry.
92-000-032 Cutter, 3D Disc, T70, Glass
index
ID
Bell Shape Hub – Slotted 3 Inch
1222-2001 Glass
1321-2040 Cr39 Only
Bell Shape Hub – Slotted 3.5 Inch
1222-3004 Glass
1300-3540 Cr39 Only
Dome Shape Hub – Slotted 3.5 Inch
1232-3004 Glass
1330-3540 Cr39 Only
Curve)
ST-270 _” x _” x 6”, Silicon Carbide Fine
ST-271 _” x _” x 6”, Silicon Carbide Medium
ST-272 _” x _” x 4”, Aluminum Oxide
ST-275 _” x _” x 4”, Aluminum Oxide
Generator Wheels
ST-276 _” x _” x 6”, White A/O Medium
Superabrasive, Inc.
pricing.
Brown Dressing Stick (For Roughing
Wheel)
OptiSource
Sentilles
Satisloh V100 Generators. These tools are
also able to generate aluminum or plastic
tools for smoothing and polishing, have a very
long lifetime and a low cutting force–thus
reducing deformation. Generating process
with predetermined cutting geometry.
Products are listed by Order No., Product,
Dia., Lens Material, Bit Type
92-000-137 Cutter, 3D Disc, T70, Glass
index
Superabrasive offers high quality generator
wheels for Coburn, Satisloh and Shuron. We
also offer a wide variety of diamond wheels
for automatic and hand edging machines. Our
metal bonded wheels feature the thickest
diamond layer in the industry, and provide a
great performance and long tool life. For pricGenerator wheels designed for high producing and specials, please call 800-987-8403 or OptiSource Truing/ Dressing / Honing sticks
bring new life back to diamond wheels. Our
tion and long life. Available for glass, photo- email to [email protected].
chromatic, plastic, and polycarbonate. COBURN
popular Brown (roughing) Truing Stick works
COB-3.5-BR-30 COBURN GENERATOR WHEEL
Specify lens material application, generator BRAZED FOR POLY/PLASTIC 3.5in
great on all wheels. This Brown Truing Stick
model, and diameter, or call for assistance.
COB-3.5-BR-30-QC COBURN GENERATOR WHEEL
dresses Finishing Wheels for like-new cutting
QUICK CHANGE BRAZED FOR POLY/PLASTIC 3.5in
action. Protect your expensive diamond
COB-3.5-BR-30-TC COBURN GENERATOR WHEEL
THRU COOL BRAZED FOR POLY/PLASTIC 3.5in
wheels with the proper maintenance they
COB-3.5-GL COBURN GENERATOR WHEEL FOR
Sentilles
deserve. *The White (fining) Dressing Stick is
GLASS 3.5in
COB-3.5-GL-QC COBURN GENERATOR WHEEL
also available. This more-coarse Dressing
QUICK CHANGE FOR GLASS 3.5in
COB-3.5-GL-TC COBURN GENERATOR WHEEL THRU Stick is for QUICKLY restoring Roughing
COOL FOR GLASS 3.5in
Wheels to a like-new condition, reviving cutLOH
ting action on worn and used wheels. (use
LOH-2.75-GL-80/100 LOH V-SERIES GENERATOR
WHEEL FOR GLASS 2.75in
product code: 40-WTS for the White Dressing
LOH-80-BR-30 LOH GENERATOR WHEEL BRAZED
/ Truing / Honing stick).
LOH-80-EP-3.5 LOH GENERATOR WHEEL
ELECTROPLATED FOR POLY/PLASTIC 90mm
40-BTS
10/12/11 11:22 AM
138
Anti-Foam
Dressing Sticks
Generator Gauges
Lab Cleaning Aids
White Dressing Stick (For Fining
Radius Gauge
Kaydry & Mini-Kaydry Disposable
Wheel
Optek
Towels
OptiSource
OWC
BPI
Effective in reducing foaming resulting from
contaminants in coolant and polish.
S96558 Gallon . . . . . . . . . . . . . . . . . . . . . . . . . . . $41.00
To maintain good control on the generator the
diamond wheel must be maintained to proper
OptiSource Truing/ Dressing / Honing sticks radius. This tool provides for an easy check.
bring new life back to diamond wheels. Our 8000-950
popular White (fining) Dressing Stick works Contact Optek for current pricing.
great on all wheels. This White Dressing Stick
Zero Set Gauge
dresses Finishing Wheels for like-new cutting
Optek
action. Protect your expensive diamond
wheels with the proper maintenance they
Used to establish lens position when grinding
deserve. *The Brown (roughing) Truing Stick is
plus lenses. Also any time take-off method is
also available. This more-coarse Truing Stick used. For Optek 800 series generators.
is for QUICKLY restoring Roughing Wheels to 8000-741
a like-new condition, reviving cutting action Contact Optek for current pricing.
on worn and used wheels. (use product code:
OM-45 Pin Pressure Gauge
40-BTS for the Brown Dressing / Truing /
Optical Machinery
Honing stick).
S96558-01 Quart 32 oz. . . . . . . . . . . . . . . . . . . . $12.25
Defoamer
Finely creped Kaydry 3-ply and Mini Kaydry
2-ply towels for cleaning without scratching.
Strong, absorbent, flexible. Kaydry towels:
15” x 17”. Mini-Kaydry: 12” x 12”.
Phantom
82300 Kaydry box of 90
82400 Kaydry case of 15 boxes
82700 Mini-Kaydry box of 19
82800 Mini Kaydry case of 15 boxes
Kimwipes
BPI
Highly concentrated anti-foam agent used to
minimize foaming in edgers and to control
foaming related to glass, plastic, or photochromic surfacing work; water miscible.
40-WTS
Honing Sticks
PSI
C477 8 fl. oz.
C478 1 qt.
C479 1 gal.
3M High Performance White Lens
Cloths
Maintain constant stock removal rates by The fast-absorbing, highly creped bleached
measuring actual pin pressures at surfacing
fibers clean glass and metal surfaces without
area on any cylinder machine. Available for all
streaking or leaving lint. 4-1/2” x 8-1/2”.
blocking styles.
Diamond wheel honing sticks keep diamond
wheels sharp and free cutting. Help reduce
breakage and increase production. Eliminate
dull wheel problems. 1/2” x 3/4” x 6”.
Generator Wheels
OptiSource
PSI
82500 Box of 280
82600 Case of 60 boxes
Safety Gloves
BPI
806 80 grit, generator
808 220 grit finishing
Dressing Sticks
Vigor Optical
The diamond grit size, bond and concentration are specifically selected for maximum
performace and life. Concentricity is held to
precise tolerances to ensure smooth operation.
Green dressing stick for finish wheel. 400 grit
12” x 8.25” x 10.25”. Order 10.400 $16.50
Glass Generator Wheels
Glass Generator Wheels
Tan/ brown dressing stick for quick, easy
removal of debris from the surface of diamond
generator wheels used for glass. 60 grit 6” x
1/2” x 1/2” . Order 10.404
$16.50 White
dressing stick for finishing. 100 grit 6” x 1/2” x
1/2” Order 10.411 $16.50. . . . . . . . $16.50 each
OWC
Designed with a unique combination of microfibers and knit construction to provide excellent dust, oil and water pickup with minimal
lint. May be used dry or damp with or without
cleaning chemicals for a variety of surfaces,
including plastic and glass lenses. Delivers
streak-free, scratch free cleaning. Cloths are
Economical protection from dyes and chemiwashable and reusable.
cals. Sheer, liquid-proof stretch vinyl devel23649-1
oped specially for the optical industry. Durable Contact PSI for current pricing.
enough to use again and again; lined lightly
Anti-Foam
with powder.
PSI
82900 Pack of 25
Lite Wipes
DAC Vision
Dressing Sticks for Diamond Wheels
Vigor Optical
Glass wheels are available in the following
These stones have the proper grit for dress- sizes:
ing, truing, roughing and finishing diamond S93223 3-1/2” dia. with 3/4” diamond section
S93225 4” dia. with 3/4” diamond section
wheels. Size 6” x 1/2” x 1/2” (1.25cm x 1.3cm S93280 2” dia. Quick-Style
x 15.1cm). Shipping Weight 2oz.
S93281 3” dia. Quick-Style
10.404 Tan stick for roughing diamond wheels, 60 Grit
$16.50
S93282 3-1/2” dia. Quick-Style
Concentrated silicone emulsion, controls
foam. Mix 1oz. (30ml) to 25 gal. (95l) of water,
Low lint, precision tissue wipes. Ideal to use in coolant or polish. Decreases surface tension
the lab to clean lenses during surfacing and when added to a fully prepared coolant or
finishing.
polish.
ST-3410 4-1/2” x 8-1/2”, 1 ply, 300/box
2121 pt. (470ml)
ST-3470 11.8” x 11.8”, 3 ply, 90/box
2121Q quart
10/12/11 11:22 AM
Lab Cleaning Aids
Lens Cleaner
Wipers, Lint-Free
Sentilles
Sentilles
139
struction provides rugged durability and an
extremely stable platform
Specifications
PSI Wipes
Range: +25 to -12 diopters
PSI
Size: 9.2” W • 10.75” D • 17.75” H
Weight: 18 lbs
Power: Transformer
50/60Hz, 1~ to 24V
-
120V-240V,
0.1A,
Precision Lap Gauges
PSI offers a variety of lens cleaning cloths.
PSI’s own lens wipes are comparable to name
brand wipes at a fraction of the cost. Available
in two sizes, PSI Small, 4-1/2” x 8-1/3” 1ply
wipes (Item #6415) and PSI Large, 15: x 17:,
3-ply wipes (Item #6422). PSI also carries
Kimwipes, Item #34155, Kaydrys, Item #34721
and Mini Kaydrys, Item #34743. All are available by the box or case.
Simply Clean Disposable Lens Cloths
Lenses rinse sparkling clean, leaving no residual contaminants to interfere with dyeing,
coating, or other down-line processes. Pump
dispenser available for easy dispensing.
Available in 8 oz., quart and gallon containers.
1-4091-008 8 oz
1-4091-032 Quart
1-4091-128 Gallon
Lint-Free Tissues & Towels
Optical Machinery
Lint-free wipers, measuring 9” x 9”, are laundered and packaged in a Class 10 Cleanroom.
Use for backside coating applications, LC3
coating systems, AR coating applications and
cleaning of AR coated lenses. Excellent for
final Rx cleaning before shipping. Also available in 12” x 12”.
1-17528 Lintfree wiper, 9” x 9”, packaged 75 per bag.
Lap Gauges
Precision Gauge Stand & Gauge
Coburn
Sentilles
No more guesswork. Get the same accurate
reading quickly every time at 180° and 90° on
your convex cylinder laps. Conversion chart
included. 50mm reads 0–14 diopters; 35mm
reads digital or analog 0–20 diopters.
PSI
Lap Cyclometer
OWC
Designed for “spec free” preparation of lenses
prior to coating or dyeing. Soft, absorbent
tissues and towels are ideal for cleaning sensitive optical surfaces, even uncoated polycarbonate. For use throughout the lab.
Non-woven, reusable disposable cloths offer 1-17524-20 8-1/4” x 4-1/4” tissues, 300/box, 20
low lint cleaning. Used for lens cleaning and boxes/case
inspection. Makes a great shop rag.
1-17524-60 8-1/4” x 4- 1/4” tissues, 300/box, 60
SCLC-20-12 12” x 12” Blue
SCLC-20-14 14” x 18” White
boxes/case
1-17526-15 15” x 16” towels, 90/box, 15 boxes/case
Defoamer
MARKING INK WATERPROOF-
Sentilles
SUREMARK
Sentilles
A deluxe, heavy-duty stand, accepts any
Coburn precision sagitta gauges. Precision
ball bushings and polished guide rails provide
smooth, effortless operation. Quick changeover for right or left hand use. Lap table
rotates to positive positioning detents to permit quick checking of both base and cross
curves of blocked lens or lap. Coburn Multi
Gauges read both plus and minus curves on
same gauge. Select choice of gauge from
those listed below.
80650-00
82980-00 50mm cylinder
82982-00 40mm cylinder
82984-00 50mm sphere
Accurate reading every time at 90 and 180
degrees on convex cylinders. 50mm readings
from planos to 14 diopters. Conversion chart
included.
Calibration Standards
Precision Tool
AL118 Lapometer
Optek
This anti-foaming agent reduces foaming
problems in edger coolant, slurries, or anyMARKING INK WATERPROOF- SUREMARK
where foam is a problem in your lab.
1-11202-008 8oz
1-11202-032 Quart
1-11202-128 Gallon
Ethyl Alcohol
Sentilles
Ethyl alcohol denatured reagent grade solvent
exceeds specifications for laboratory and AR
coating processes. Also exceeds specifications established by the American Chemical
Society (AMS) in the seventh addition of
“Reagent Chemicals.” Can be used anywhere
in your lab procedures where you are currently using a lower quality, more expensive
ethyl alcohol. Available in gallons.
1-2053-128
bottle.
1-2322
1-2323
1-2324
1-2325
1-23250-08
1-2322
1-2323
1-2324
1-2325
1-23250-08
Machined to Essilor glass master standards.
Provide a known accuracy for the entire lab.
CNC turned on a stainless steel lap tool style
base. ±0.002mm accuracy at 40mm sag.,
guaranteed. Easily retruable. Available in
plano, 10.00D, 6.00D., and 3.00D, both concave and convex. Order in sets for additional
discounts. Custom carrying cases available.
Accurate gauging and equipment is of no
value without proper calibration.
Featuring advanced transducer technology,
the ACCUcomp AL118 Lapometer is a precision, microprocessor-controlled instrument.
The AL118 uses a rotating base to gauge both
base and cross curves, ranging from +25 to
-12 diopters. With the optional adapter, the Contact Precision Tool for current pricing.
AL118 can also be used to gauge generated
curves on a blocked lens.
Lap Tooling
instantly calculates and displays curve information in True sag value displayed to 0.01
mm, True and compensated (stamped) curves
displayed to 0.01 diopter, and Radius of curvature displayed to 0.001 mm - Rotating base
allows gauging of both base and cross curves
- Integrated large and small spaced ball
points allow precise gauging through the widest curve range - User programmable indices
of refraction and pad thicknesses allow
extreme versatility - Advanced transducer
technology - High contrast multiline LCD display - Included calibration standards allow
quick and precise calibration to compensate
for room temperature changes and other variables - Heavy duty aluminum and steel con-
2-1/2” x 3” Convex Laps
Coburn
A complete range of laps from plano with a
5.00 cylinder to a 14.00 base, 1 cylinder.
Available in aluminum, finished and semi-finished. Although Coburn offers the 2-1/2” x 3”
laps, we highly recommend the use of the
larger plastic laps (up to 9.00 base and 3.00
cylinder) for better surfacing quality. Discounts
available for semi-finished laps.
Finished
30037-00 2-1/2” x 3” Convex Aluminum (order each
curve)
Products are listed by Order No., Base Curve,
Cross Curve
Semi-Finished
10/12/11 11:22 AM
140
4260-05 Plano, 5.00
4260-15 1.00, 5.00
4260-25 2.00, 5.00
4260-35 3.00, 5.00
4260-45 4.00, 5.00
4260-55 5.00, 5.00
4260-75 7.00, 5.00
4260-85 8.00, 5.00
4260-95 9.00, 5.00
4261-01 10.00, 1.00
4261-11 11.00, 1.00
4261-31 13.00, 1.00
4261-41 14.00, 1.00
3-1/4” Round Convex Laps
Coburn
Q392 LIGHTWEIGHT LAP TOOLS
Tool Table Puller
Vista Lap Holder
Coburn
Optek
OWC
Coburn’s Q392 Lightweight Lap Tools have
been designed to make them as light as possible and still maintain structural stability.
Q392 Lap Tools are molded from an engineering plastic which permits a lightweight lap
design with maximum stiffness and stability.
The selection of proprietary blended materials
coupled with a design featuring a cavity and
rib construction to reduce weight makes the
Q392 Lap special. Today’s larger, more
expensive lens blanks demand larger tools
when surfaced. Processing uncut 76-80 millimeter blanks with 2 _” x 3” tools not only
increases cycle times but also increases
rejects because of edge swirls that do not
polish out. Eliminate this costly problem by
using the 3 _” Q392 Lightweight Lap Tools.
Coburn offers a complete selection of 3-1/4”
diameter round laps designed to accommodate the larger lens blank. Available in aluminum, finished and semi-finished. Discounts
available for semi-finished laps. Finished laps
are available in 0.12 diopter steps for both
base and cylinder curves. Laps can be compensated to your special needs. Coburn recommends lap tools be compensated as follows: Aluminum Tools for Plastic Lens–0.018”;
Lap Tools with Coburn Metal Fining Pad
–0.30”. Note: 3-1/4” aluminum lap tools are
VersaTool XRL
available for curves up to 9.50 diopter base
and out to 6.00 diopter on certain curves.
Coburn
Coburn will automatically substitute 2-1/2” x
Solid
plastic
VersaTool
XRL provides consis3” tools for curves outside the limits possible
tency and stability during lens processing.
with 3-1/4” tools.
LensMaker Surface Lathes accept VersaTool
Finished
XRL without the need for special adapters.
30023-00 3-1/4” Aluminum (order each curve)
They are easily retrued in Coburn generators
Products are listed by Order No., Base Curve, for long life. The VersaTool XRL has an
Cross Curve
extended lap range of -7D to +20D.
Semi-Finished
30022-11 1.00,
30022-23 2.00,
30022-33 3.00,
30022-41 4.00,
30220-00
1
3
3
1
Replacement Rubber Pads for Air &
Hydraulic Presses
Cross Curve
DAC Vision
A great aid in removing tool tables from spin-
P/N S02108
dles.
4000-313
Lap Truers
ToolCalc
Lap Cutter 302RB
Optek
OWC
ToolCalc software performs quick and precise Known in the industry for accuracy and
tool calculations and dramatically reduces dependability. Laps can be cut within 0.01
diopters with accurate pad compensations
setup time at the lap cutter. Specially trained
included. The curve range of the 302 Lap
personnel are no longer required. ToolCalc is
Cutter is 2.00 to 20.00 diopters concave or
fast, easy and efficient. Calculates lap tool convex. 60”h x 41”w x 34”d (104cm x 86.3cm
curves, compensation, and radii. Supports a x 152cm). 1,300lb. 220V AC, 1 phase, 60Hz,
variety of conventional lap cutter types. Uses 8A.
either inches or millimeters. Customizable pad Contact OWC for current pricing.
thicknesses. Converts among indices of
Vista 2G 3-Axis Generator
refraction. Prints clear and concise tool spec-
OWC
ification reports showing tool curves, index of
30022-43 4.00, 3
30022-53 5.00, 3
30022-61 6.00, 1
refraction, pad compensation value, calculated radii for lap cutters, tool curves at the
Cross Curve
30022-63 6.00, 3
30022-73 7.00, 3
30022-83 8.00, 3
30022-93 9.00, 3
Lap Cutter Points
Coburn
gauge, and tool curve sag readings. Minimum
system requirements: IBM PC compatible,
486DX 33Mhz or higher, running MS-DOS 6.0
ST-86H (hard)
ST-86S (soft),3-15/16” dia. pads for ST-85A OptiSpeed® Air Press. Order individually.
Clamp Arm Puller
Optek
or later or MSWIndows 3.1 or later, VGA display adapter, 1MB RAM, 4 MB hard disk
space, 1.44MB 3.5” floppy drive.
22623 Lap Cutter Tip
Optical Machinery
Compact 3-axis computer-controlled capable
of cutting plastic laps +30.00 to –30.00 up to
90mm in diameter. 28” x 21” x 17” plus cabinet. 110lb. 110V, 20A.
Laps
SG PLASTIC LAP SERIES
Coburn
Provides fast, accurate cutting, long life.
22623 carbide tip, for Coburn 302 and 303 Lap Truers
LapMasters™
Coburn
For ease of maintenance.
4000-402
High Curve Tool Table Assembly
Optek
Dense foam lap tools may be processed on
Coburn SGX and SG8 Surface Generators to
exactly match processed lenses. LapMasters
are designed for one time use and are a convenient and economical alternative when
required tools are unavailable.
LapAdapter
129662 Regular (x-cut, with magnet)
143133 Hi-diopter (x-cut)
LapMaster
151133 30 diopter (for SG8 use only)–48/box
LapMaster-2
129184 Regular–490/box
151124 Hi-diopter–200/box
Lap Cutter. Counter sunk screwhole.
22623 Carbide Cutter Insert for 302
OWC
For use when surfacing high curves through
full range or large lenses with extreme over- Carbide insert for 302 and 303 lap truers.
hang.
3-sided.
4000-318
Carbide triangular tip for 302 and 303 Coburn
A proven plastic lap series to support lap cutting on SGX Surface Generators and to provide an alternative to Q392 finished lap sets.
3024002
Semi-finished, 2 base, orange
3024006
Semi-finished, 6 base, turquoise
3024010
Semi-finished, 10 base, gray
3024100
Finished, specify curve, compensation, and tool index
10/12/11 11:22 AM
Plastic Fiberlite Lap
Laps
OptiSource
Laps
DAC Vision
141
by glass Essilor standards for accuracy.
Marked with steel stamp, packaged securely,
ready for production when you receive them.
Available in convex and concave surfaces,
any quantity in sphere and cylinder. Laps can
be anodized. Same day shipment on most
special Rx laps. 2.00 through 10.00 base,
plano through 4.0 cylinder available in 3”,
3-1/4”, or 3- 1/2” finished lap. Rx and specialty laps cut on largest blank possible.
Finished sets, fill-ins, heavy usage duplicate
ranges, base and cylinder extensions quoted
on an order-by-order basis. Contact Precision
Tool for details. Rx Express: We are the Rx
Lap Specialists. Up to 32 diopter curves,
saddlebacks, concaves, low base and
extreme cylinders. Additional charges for
guaranteed same-day shipment for orders
placed by 1:00 p.m. CST. All specialty tools
guaranteed to be well within ANSI standards
to allow you to do the job right the first time.
der machine pressures. Locator slot machined
to +0.0005”/–0.000”, base width machined to
±0.002”. Aircraft aluminum is harder than cast
alloys and has no porosity. Sizes: 1-3/4” to
2-3/4” round, 3” round, 3-1/4” ound, 3-1/2”
round. Additional charge for extra thickness
and rectangle.
Precision Pedestal Lap Rack
Unparalleled precision quality now available in
a plastic lap tool. The DuraLap is completely
machined from solid polymer bar stock (not
molded). Matched in height. Completely solid
base. Does not shift over time. Does not flex
under normal cylinder machine clamping
pressures. Features all of the benefits associated with plastic tooling without compromising accuracy or durability. Can be easily finished in a generator or on a lap cutter.
Available in both semi-finished and finished
forms. Semi-Finished: 2-1/2” in 8, 10, 12 base.
3” in plano, 2, 4, 6, 8, 10 base. Finished:
Available in any diopter increment, with any
pad compensation, in any index of refraction.
2 base through 4 cylinder. Set quantities;
under 2 base, over 10 base, or above 5 cylinder, additional cost. DuraLap Rx Express:
Precision tool now offers the best lap tool cutting service available. Call us by 12:00 p.m.
CST and we will cut and ship same day any Rx
you need on all machined, matched height
DuraLap. Our Rx tools, regardless of the complexity of the curves, are guaranteed to be
well within ANSI standards to allow you to
process your work right the first time. Plano
through 25 diopters, convex, concave, saddlebacks, perfect spheres, low base high cylinder, and extreme curves. Below 2 base with
over 6 cylinder.
The Precision DuraLap
Precision Tool
High-quality plastic laps will not warp over
time. They do not produce dangerous fumes
or odors when cut and allow for faster
machining. All Plastic Fiberlite Laps are quality controlled to ensure that there are no holes
or voids. Different base curves are available
for “SPECIAL” jobs. To get SUPERIOR Plastic
Fiberlite Laps at great discounts, order today. Contact Precision Tool for current pricing.
Machine quickly without wear on cutting tools
and no excessive wear on lap tables or
machines. These laps won’t change curvature
during temperature fluctuations in fining and
polishing. Designed for bare tool and base Contact OptiSource for current pricing.
pad applications. Great alternative when cutFoam Lap Holders
ting out of range curvatures.
Precision Tool
OWC
DV-MAPSF – Plano base machined laps
DV-MA2SF – 2 base machined laps
DV-MA10 SF – 10 base machined laps
P/N 129662-regular base
P/N 143133-high base
pricing.
Foam Laps
OWC
Laps
Optek
Foam laps sold individually or by the case.
P/N 129184-regular base
P/N 151124-height base
Plastic Lap
Range: 4/6, 6/8, 8/10, 10/50. 3-1/4” round with
cylinder. 100% prime aluminum or plastic.
Semi-finished and finished.
OWC
Maintain lap inventory in an easily accessible,
convenient storage space. The Precision
Pedestal Lap Rack is design to maximize tool
storage without stacking laptools (the single
greatest cause of lap wear) while taking up
minimal space. Standard tool rack has 20
individually rotating shelves made of cabinetgrade fiberboard mounted on heavy-duty
brackets and industrial-grade roller bearings.
Shelves are slotted so each tool has a unique
address. For quicker positioning and retrieval,
slots can be individually tagged for a minimal
charge. Too maximize capacity, every other
slot is doubled to hold duplicates. We can
also fabricate custom racking and shelf systems per your special needs.
Reinforced Base Duralap Laps
Transponder Laptool
Precision Tool
Precision Tool
OM-FLK Foam Lap Kit
Optical Machinery
Special filled plastic lap. Allows for deep cuts,
yet holds curves true. No warp or flex with this
lap. Available in 3, 6, 10 and 14 bases. Semifinished. Finished. Above 12 diopters. Above
16 diopters.
Kit includes: 2 each Regular Lap Holder; 2
each High Base Lap Holder; 6 each Regular
Foam Laps; 6 each High Base Foam Laps.
Precision Finished Aircraft Aluminum
Lap Tools
Precision Tool
OM-L10-2 / OM-L10-2-1/2 Laps
Optical Machinery
Now Precision’s Duralap Laps are available
with an aluminum reinforced base. This tool is
completely machined from solid polymer bar
stock (not molded). Matched in height to provide even cylinder machine pressures. The
base is completely solid and will not shift over
time. With the specially inserted aluminum
bars in the base the tool can hold up to
greater clamping pressures than the regular
duralap. Features all the benefits associated
with plastic tooling without compromising
accuracy or durability. Available in both semifinished and finished forms in a wide variety of
diameters and curves.
Made from the same quality aircraft aluminum
as our regular laps, the Transponder laptool is
designed to receive an electronic chip for the
fastest in retrieval, reshelving and data entry.
These tools can also be adapted for any
robotic arm, just provide us with the pattern.
Matched in height to provide even cylinder
machine pressures. Aircraft aluminum is harder than cast alloys and has no porosity.
Available in a wide variety of diameters and
curves.
Aluma Laps®
PSI
Semi-finished Aircraft Aluminum Laps
Precision Tool
Finished our specialty Precision machined
aircraft aluminum lap tools. Long life, absolute
accuracy, and designed for close tolerance
manufacturing to a +0.01mm–0.00mm on
Machined lap from solid PVC; allowing opera- sagitta reading. Tooling accuracy 50% closer
tor to cut a myriad of high base and high cross than current suggested ANSI Standards.
curves without fear of cutting through like Precision machined clamping surface so
accuracy and location between base and
other “plastic” laps.
surface are in line. Matched height for uniform
OM-L10-2 Lap, 10 Base, 2”
surfacing pressure. Long life, made by
OM-L10-2-1/2 Lap, 10 Base, - 2-1/2”
machinists, calibrated with Varilux gauges and
The Aluma-Lap® from PSI is cast from precedent 71 alloy, which is the purest alloy used
in the industry. All tools are machined to close
tolerances and unconditionally guaranteed.
Available in finished or semi-finished. Call PSI
Semi-finished from 1-3/4” diameter to 3-1/2” to help determine the best solution for your
diameter in all curves convex and concave. lap needs.
Precision machined from solid aircraft alumi- Contact PSI for current pricing.
num. Matched in height to provide even cylin- Quantity discounts available.
10/12/11 11:22 AM
142
Lens Prep
Laps
Lens Cleaners
OptiSource
Aluma-Laps® Hi-Curv
Mark Off!
PSI
BPI
uncoated polycarbonate. Designed for lense
preparation prior to coating or dyeing. Pop-up
box provides ease of use and contains 140
single ply towels. Replaces EX-L #34133. Also
available in MP/three ply.# 1-17521. Available
in single boxes and cases of 15 boxes.
MARKING INK WATERPROOFSUREMARK
Sentilles
OptiSource Lens Prep is your final cleansing
tool before chemical treatment. BEST when
used heated, it prepares the lens for tint or UV
by first cleaning the lens of oils, then preheating the lens for FASTER absorption of your
Special laps enable high curves to be cut The easy-to use pen that quickly removes chemicals. Simply dip your lenses into Lens
while still allowing maximum surfacing area.
marks from progressive lenses. Acetone free. Prep for 30 seconds, then put them right into
1000-1.75 1-3/4” round
the dye for an AMAZING improvement. Lens
71025 CR-39
Prep cleans and pre-heats the lens. The open
1000-2 2” round
71026 Polycarbonated
pores on preheated lenses QUICKLY and
1000-2.25 2-1/4” round
evenly absorb dye and UV. *Can also be used
1000-2.50 2-1/2” round
MARKING INK WATERPROOF- SUREMARK
cold
Acetone
PDQ Lap Service
OptiSource
99-LPQ
Lens Prep (Gallon)
PSI
OptiSource
Guarantees that finished lap orders received
by 1:30 pm E.S.T. will be shipped the same
day. Maximum of 6 tools.
Practical Lap
PSI
Acetone removes ink markings from lenses
and frames. Acetone is a FAST evaporating
OptiSource Lens Prep is your final cleansing
formula. Simplify your order process and call tool before chemical treatment. BEST when
OptiSource today. Available in 1 quart con- used heated, it prepares the lens for tint or UV
by first cleaning the lens of oils, then preheattainer.
ing the lens for FASTER absorption of your
99-AQ
chemicals. Simply dip your lenses into Lens
Prep for 30 seconds, then put them right into
the dye for an AMAZING improvement. Lens
Denatured Alcohol
Prep cleans and pre-heats the lens. The open
The Practical Laps from PSI are lightweight
pores on preheated lenses QUICKLY and
OptiSource
plastic laps that will reduce wear and tear on
evenly absorb dye and UV. *Can also be used
cylinder machines. Resists dents and nicks
cold.
99-LPG
during lens processing reducing the need to
retrue tools. Steel braces ensure stability durLens Cleaner
ing the clamping and cutting process. ColorPSI
coded for efficient storage and retrieval.
Reduce your inventory to 3 bases, 2 (Red), 6
(Green) and 10 (Gray). Cutting times are
reduced to 1 to 2 minutes depending on the
curve. The Practical Lap can be cut in one
pass to an accurate curve consistently, with- Denatured Alcohol solutions are available in 1
out regard to clamping pressure. Call PSI to quart containers. Add these onto your existhelp you determine the best solution for your ing order to avoid needless, frequent and
lap needs.
lengthy trips to the store. Denatured Alcohol is
Cutter Tips for Lap Cutters
Sentilles
EASY-to-use and is FAST evaporating.
99-DAL
Isopropyl Alcohol
OptiSource
dropper top and 1, 2, 4 and 8 oz. pump tops
as well as quart and gallon refills. Private
labeling is available.
Cutter tips for lap cutters available for majority of models.
Products listed by Part#, Desc., Manu &
Model
bottle.
1-2322
1-2323
1-2324
1-2325
1-23250-08
1-2322
1-2323
1-2324
1-2325
1-23250-08
Microfibre Cleaning Cloths
Vigor Optical
Available in 5 colors and 2 sizes. Individually
packaged in a poly pouch. Available with
pinked edges ( 5” x 6”) or larger hemmed
edges ( 7” x 7”). Sold by the dozen.
5” x 6” Pinked Edge...dozen
29.065 Beige...$9.50
Lint-Free Towels SP
29.065 Black...$9.50
Sentilles
29.065 Blue...$9.50
29.065 Crimson...$9.50
29.065 Gray...$9.50
10-02970 Carbide Cutting Tool, Shuron/Oldfield 10
10-2970 Cutting Tool (Bar), Shuron/Oldfield 10
Isopropyl Alcohol solutions are available in 1
7” x 7” Hemmed Edge...dozen
1801-1671 Long Cutter Tip and Holder, Coburn 1801
quart containers. Add these onto your existing
29.067 Beige...$15.50
order to avoid needless, frequent and lengthy
29.067 Black...15.50
302-22623 Triangle Cutter w/Hole, Coburn 302
310-10925 Triangle Cutter, CMV 310
340-624037 Chip Breaker - Rectangle, FB Optical 340
trips to the store. Isopropyl Alcohol is EASY-
340-624116 Square Cutter Tip, FB Optical 340
to-use and is FAST evaporating.
410-10925 Triangle Cutter, Shuron/CMV 410
99-IA
29.067 Blue...15.50
29.067 Crimson...15.50
Soft, absorbant, “spec-free” towels are ideal
for cleaning sensitive optical surfaces, even 29.067 Gray...15.50
10/12/11 11:23 AM
Machine Supplies
143
Fiberglass Repair Parts
Orbit (eccentric) Drive Assembly
Repair Parts - Cylinder Machines
Optical Machinery
Optical Machinery
Optical Machinery
Diamond Saver
BPI
ST-2136 Wash Pan
ST-21467 Slurry Bowl
Heat dispersing and high lubrication qualities ST-21472 Slash Shield
prolong the life of diamond wheels with regu- ST-6107 Rubber Trim p/foot
lar use. Foaming is minimized.
70800 Quart
71700 Gallon
Orbit drive:
ST-27612 Orbit (eccentric) Spindle Drive Assembly
Oscillating Shafts / Bearings
Optical Machinery
ST-21255 Rocker Arms
ST-329 Pins
ST-600 Pin Holder
ST-9275 Air Clamp Cylinders
Rocker Arm Assembly (airplanes)
Optical Machinery
Heater Elements
Optical Machinery
Rocket Cherokee Oil
Coburn
A high-viscosity fluid for the hydraulic unit of
the
Coburn
automatic
generators.
Manufactured to the rigid specifications
required by the special needs of this equipment and should not be replaced by any other
fluid.
9942-70 Gallon
Sta-Kleen
Coburn
Heaters for Reclaim Tanks, Blockers and Tint Units:
9008 Ring Heater - 120 volt / 1000 watt
9009 Cartridge (Lipstick) Heater - 120 volt/50 watt-99
Repair parts for 505/506/5056/5000:
ST-21424 LARGE (front) flange block bearing for oscillating shaft
ST-9651 SMALL (back) pillow block bearing for oscillating shaft
Pumps
Rocker Arm (airplane’s) Assemblies:
ST-25975 OLD Style Rocker Arm Assembly
ST-26699 NEW Style Rocker Arm Assembly
Speed Reducer
Optical Machinery
Optical Machinery
Blkr
9011 (Lipstick) Heater - 120 volt/100 watt
9017 Cartridge (Lipstick) Heater - 99 Reclaim
Heating Elements
Machinery cleaner for removing grease, cerium and emery deposits, dirt or rust from laboratory equipment. Works fast, is easily applied
and wipes off, carrying the dirt with it. Packed
in convenient plastic container for instant use.
Optical Machinery
493-60 Quart
Lubriplate-Super Lubricants
Optek
Recommended for use in all Optek equipment. Substantially reduce wear. Combination
of high film strength and waterproof proper- ST-72-02 Heater-120 volt / 800 watt-2 Pot Dye
ties make them ideal for use on optical equip- ST-74 Heater - 1500 watt
ment.
3V Machine oil, per qt
630AA Grease, 1lb.
630AA Grease, 5lb.
930AA Grease, 14 oz.
ST-74-N Heater- 1000 watt
ST-74-N-220 Heater-220 volt - Dye Pot
Lap Table Assembly
Optical Machinery
Assorted Baffles and Retainers
Assorted fluid delivery pumps.
16264-110 Coolant Pump Assy - 5056 - 110 volt
16264-220 Coolant Pump Assy - 5056 - 220 volt
16264-99-110 Coolant Pump Only - 110 volt
16264-99-220 Coolant Pump Only - 220 volt
2018 Pump and Motor for 113 Generator
21180 Pump Assy - 220v - 3-prong plug
21180-01 Pump Assy - 220v/50hz/1-ph
21438 Pump Assy - 220v - 4 prong plug
41139 Pump - 108CT - 220 volt
6273 Pump - 115 volt
6275 Pump - Generator - 115/60
6287 Pump Motor Only - 220 volt
6288 Pump Motor Only - 110 volt
ST-003-8 Pump for small chiller
ST-16-16P Pump for LARGE chiller
ST-17-01 Pump & Motor Assy 1/2hp
ST-17-01M MOTOR only 1/2hp
ST-17-02 Pump Motor Assy 3/4hp
ST-17-02M MOTOR only 3/4hp
W-P230 WECO 230 volt pump
Regulators / Filters
Optical Machinery
Optical Machinery
ST-23011 Idler Pulley Kit
ST-6982 Speed Reducer
Thermostats
Optical Machinery
Thermostats for blockers, reclaim and tint units:
8387 Thermoswitch 85 to 250*
8388 Thermal Safety Switch
ST-002-05 Limit Switch-180*
ST-68-10 Sensor Probe for ST-68
ST-68-5 T’stat for ST-68 & ST-89 Dye Unit
ST-75-20 Thermostat Assembly
ST-75-20T Thermostat ONLY
Timers
Optical Machinery
ST-21301 Tool / Lap Holder Assembly-505 / 506
For 505, 506 and 5056 cylinder machines. The
new superior material resists cracking and
tearing and also seals out moisture and grit
better than rubber baffles.
ST-21435 Handle for tool holder
ST-28380 Tool / Lap Holder Assembly-AIR-5056
ST-40153 Tool / Lap Holder Assembly RH - 5000
ST-40153-01 Tool / Lap Holder Assembly LH - 5000
505/506/5056/5000 Parts:
ST-6237 Regulator
ST-6639 Lubricator
ST-7097 Pressure Gauge
ST-7368 Filter
Timers:
ST-6662 Face Plate-15 minutes
ST-6665 Face Plate-10 minutes
10/12/11 11:23 AM
144
ST-6694 Timer Knob
ST-8361 Timer-10 minute
ST-8380 Timer-15 minute
White Defoamer Concentrate
Acuity Compliant Adapter Acuity
OptiSource
Style
506
OWC
OWC
Wobble Assembly
Bearing Block Assembly for 505 and
Optical Machinery
Our super-concentrated, Industrial-Strength
White Defoamer, instantly knocks down any
foam. If your lab is a having a persistent foamST-25976 OLD Style (1/2 in) Wobble Assembly
ST-26692 NEW Style (5/8 in) Wobble Assembly
Buffing Pads
OptiSource
ing problem, simply add Industrial-Strength
Acuity Compliant Adapter, Acuity style P/N #29355 direct replacement for 505, 506 and
5056 cylinder surfacers.
3171100.
Defoamer to your edger or generator reser- Available in both Coburn and LOH styles.
voir, and watch your foam disappear.
Cylinder Axis Blocks
99-DFG
OWC
Acuity Lap Table Assembly
OWC
White Defoamer Concentrate (Quart)
OptiSource
Buffing Pad are made of 100% cotton,
SPECIALLY treated with a UNIQUE patented
process which removes impurities and makes
the cloth finer and virtually lint-free. The abrasive elements found in ordinary cloths have
been removed, which means the Buffing will
last up to 50% longer. Since Buff changes are
less frequent it means there will be less
machine down time. The Buff hardly frays at
all, so it uses less polishing compound. The
compound holds better on the buff for a
smoother, more uniform finish. Buff features 4
rows and shellac centers. This is a 3”, 50-Ply
Super Buff Buffing Pad.
01139/21310 cylinder axis blocks used on
OWC, Coburn and other model cylinder
Replacement part for Gerber Coburn Acuity machines.
lap table spindle assembly #31540.00 left or
Lap Table Assembly - 5000
right.
foam. If your lab is a having a persistent foaming problem, simply add Industrial-Strength
Acuity Rocker Arms
Defoamer to your edger or generator reser-
OWC
OWC
voir, and watch your foam disappear.
99-DFQ
Pink Defoamer Concentrate Gallon
White Defoamer Super Concentrate
OptiSource
OptiSource
#40124 lap table assembly replacement for
Does your lab have a persistent foaming problem? Are adverse water conditions a concern?
For ultra-tough, dirty applications, look no
further than OptiSource’s industry-leading
Defoamer. SIMPLY add drops of our PinkIndustrial Defoamer to your edger or generator reservoir and watch your foam disappear.
99-PDFG
Pink Defoamer Concentrate Quart
OptiSource
Acuity rocker arm P/N 3153600
5000 cylinder surfacer.
Adjustable Lower Orbit Drive - 5056
Lap Table Assembly for 505/506
OWC
OWC
foam. If your lab is a having a persistent foaming problem, simply add Industrial-Strength
Defoamer to your edger or generator reservoir, and watch your foam disappear.
99-DF8
Acuity Complaint Adapter Gerber
Coburn Style
OWC
#29358 adjustable lower orbit drive for 5056
cylinder surfacer.
#21301 replacement lap table assemblies for
Coburn 505 or 506 cylinder surfacer.
Lap Table Assembly for 5056
Baffles
OWC
OWC
Does your lab have a persistent foaming problem? Are adverse water conditions a concern?
For ultra-tough, dirty applications, look no
further than OptiSource’s industry-leading
Defoamer. SIMPLY add drops of our PinkIndustrial Defoamer to your edger or genera- Acuity Compliant Adapter, Gerber Coburn
tor reservoir and watch your foam disappear.
Style P/N 3171200
99-PDFQ
#28380 lap table assembly for 5056. Available
with barb or quick push-in air connection.
10/12/11 11:23 AM
Machine Supplies
145
Rocker Arm Assembly - 5000
Toric Baffle and Rings
Toric Pin Adapter Nut
OWC
OWC
OWC
Loh Pneumatic Reception Complete
OWC
#40250 rocker arm assembly replacement for Replacement baffle # 3117900, lap table skirt Replacement Parts - P/N 3120900 pin adapter
# 3118600, clamp ring # 3118200 and upper
5000 cylinder surfacer.
nut.
bowl ring # 3118400 for Gerber Coburn toric
Replacement part – Loh pneumatic reception
for Loh cylinder machine # 02-900-218 (R) and
#02-900-219 (L).
Rocker Arm Assembly for 5056
OWC
surfacers.
Toric Bearings
Toric Polish Pin
OWC
OWC
Loh Type Tool Spindle
OWC
#28180 rocker arm assembly for 5056.
Replacement Parts - P/N 3109100 polish pin.
Replacement Parts - P/N 964200, P/N
Rocker Arm or Airplane Assembly for 1223800, P/N 1224400, P/N 978600 bearings.
Replacement parts- Loh complete cylinder
machine spindle # 02-901-681 and compensating membrane # 02-001-945
505 and 506
OWC
Toric Belts
Toric Rocker Arm & Shield
OWC
OWC
Loh Workpiece Cylinder
OWC
Replacement toric rocker arm # 3115100 and
#25975 replacement for 505 and 506 cylinder
Replacement part – Loh workpiece cylinder # surfacer.
02-900-212
Orbit Drive Assembly - 505/506
Tool Post Drive Assembly for 5000
OWC
OWC
shield # 3107600 for Gerber Coburn toric cylReplacement Parts - P/N 127130, P/N inder machine.
1223700, P/N 1078300 belts
Toric Horizontal Breakup Assembly
OWC
Toric Rocker Arm Assembly
OWC
#42252 right assembly for 5000. #40253 left
Replacement Parts - P/N 3115700 horizontal Replacement Parts - P/N 3113700 rocker arm
#27612 direct replacement for orbit drive on assembly for 5000.
breakup assembly.
assembly.
505 or 506 cylinder surfacers.
Orbit Drive Assembly for 5056
OWC
Toric Adapter
Toric Lap Table Assembly
OWC
OWC
Toric Rocker Arm Shaft
OWC
#28166 orbit assembly for 5056 cylinder sur- Replacement Parts - P/N 3121000 adapter Replacement lap table assembly # 3118900
Replacement Parts - P/N 3105700 shaft
body.
for Gerber Coburn toric surfacer.
facer.
10/12/11 11:23 AM
146
Machine Supplies
QR II-C Quick Release Processing
System
PM Cleaning Solvent
Pad Dispensers - Dual & Single
Sentilles
OWC
Use this cleaning solvent in the C’N’C with the
450 and 550 coatings to clean out build-up
and decontaminated coating lines and other
UV curable backside coating systems. 4 gallons/case.
Designed for dispensing fining and polishing
pad. Single and dual roll unit available. Heavy
metal construction.
DAC Vision
Toric Tool Post Assembly
OWC
Abrasive and polishing pad system eliminates
repetitive injuries associated with pad peeling
and increases efficiency by 30 - 45%. V shape
Replacement Parts - P/N 3113800 (L) P/N (3” – 4 leaf) Plano to 8 Base, N shape (3” – 7
leaf) 8 - 12 Base and Q shape (2_” – 12 leaf) 13
3113900 right and left tool post assembly.
Base +
Wobble Plate Assembly for 505 and
506
PDR1821
Blue
V, N
PDR1822
Purple
OWC
PDR1823
Pink
PDR1824
White
V, N, Q
PDR1825
Green
V, N
PDR1826
Yellow
V, N
V, N
V, N
Contact DAC Vision for current pricing
Velocity™ Premium One-Step Fining
Pad – Polycarbonate
1-4001-128
Pad Dispensers
PSI
Coburn
For quick stripping and dispensing of roll-type
pads. Accommodates up to one roll of pre-cut
pressure-sensitive pads.
8021600
Air Pad Press
DAC Vision
Optek
Wobble Plate Assembly for 5056
OWC
Features an exclusive abrasive offering
aggressive stock removal and reduced cycle
times with superior surface finish. Ideal for all Rugged construction. Dual hand buttons. Fast
types of generated surfaces and cylinder operation. 115V, 60Hz or 220V, 50Hz. 24”h x
15”w x 10”d. 80lb.
machines.
903
Time: 1 _ to 2 minutes at 16 to 18 psi for pin Contact Optek for current pricing.
style machines and .25bar for reception style
#29360 wobble plate assembly for 5056 cylinOM-20 & OM-20L
machines.
der surfacers. Uses aircraft nuts for easy
Optical Machinery
Speed: High
adjustment.
Pad Cements & Solvents
Easy Lift 2 Base Pad System
Manual Pad Dispenser
#26692 wobble plate assembly for 505, 506
cylinder surfacers. We use aircraft nuts for
easy adjustment.
80216 Single
80217 Dual
Median take-off: .20 to .24mm (can achieve
.28 to .35 with increased time)
The Easy Lift 2 color-coded base pad system
eliminates the strain of pad peeling and
reduces repetitive motion injuries for lab personnel. The system is made of three components, the semi-permanent color-coded base
pad and easy lifting fining and polishing pads.
The colored material simplifies lap identification making it easier to retrieve and re-store
laps by the proper base curve, reducing errors
due to poor lap selection.
Colored Base Pads – The non-abrasive colored vinyl base pad material has a multi
directional embossed surface which allows
fining and polishing pads to interlock between
pad surfaces. Propriety adhesives hold the
fining and polishing pads securely to the base
pad during processing while allowing them to
be quickly removed without the use of knives.
Base pads are available in 4-petal for plano to
8 base and 7-petal for 8 base and higher.
PDR6050NC - 3” (76 mm) - 7 leaf
Mean Green™ 2nd Fine
PDR6050NNF - 3” (76 mm) - 7 leaf
DAC Vision
PDR6050RF - 3” (76 mm) - 16 leaf
PDR6050YC - 3 1/4” (83 mm) - 7 leaf
Time: 1 _ minutes at 16 to 18 psi for pin style
PDR6050YF
3
1/4”
(83
mm)
7
leaf
machines and .25bar for reception style
These pad dispensers are designed to give
machines.
Contact DAC Vision or DAC Edge for current fast, efficient removal of pads. Heavy gauge BP4-WHI White, 4-petal
pricing.
steel construction.
Speed: High
OM-20
Median take-off: .10 to .14mm
holds standard size rolls, Unit measures 4-1/4”w x 8”l
Acetone
x 4-3/4”h
PDR1050N 3 “ (76 mm) - 7 leaf
Sentilles
OM-20L
holds large over-sized roll, as well as standard size
rolls, Unit measures 4-1/4”w x 10”l x 5-5/8”h
pricing.
P280 & Mean Green™ Two-Step
Fining Pads
OM-20 Pad Dispenser
DAC Vision
Optical Machinery
Two Step Pad system designed for labs seeking high stock removal for polycarbonate and
Trivex lenses. Ideal pad combination for labs
with minor curve and tooling imperfections.
Works well with older 2 axis wheel generators. Acetone for general purpose cleaning, AR
processes and removal of factory markings.
P280 Black 1st Fine
Filtered to 0.2 microns. Exceeds specificaTime: 1 to 1 1/2 minutes at 16 to 18 psi for pin tions for laboratory and AR coating processstyle machines and .25bar for reception style es. Also exceeds specifications established
by the American Chemical Society (AMS) in
machines.
the seventh addition of “Reagent Chemicals.”
Speed: High
Can be used anywhere in your lab where you
are currently using a lower quality, more
Median take-off: .18 to .22mm
expensive acetone.
PDR2800N 3” (76 mm) - 7 leaf
1-2043-128 available in gallons
Fining & Polishing Pads - Fining and polishing
pads are made with high quality 3M abrasives
and Shawsheen polishing materials. Fining
Pads are available in one and two-step systems for all plastic, polycarbonate and Trivex
lenses. Pads are 3” in diameter with wings
and come 250 pads per roll.
One-Step Pads for Plastic (1.498), Mid-Index
(1.50-1.594) & High Index (1.594+)
This pad dispenser is designed to give fast, EL2-15-16 15 micron, AO film, 16-petal
efficient removal of all pads packaged on a EL2-800 P800, AO paper, 7-petal
roll. Constructed of heavy-gauge steel to last
and last. Will accept rolls to 4-1/4”w.
One-Step Pads for Polycarbonate (1.586)
10/12/11 11:23 AM
and Trivex (1.53)
147
OM-85 Air Pad Press
Manual Pad Press
Overarm & Pin Holder Assembly
Optical Machinery
PSI
Optek
Polish Pads (all materials)
EL2-449-7 Yellow Ultimate, 7-petal
This press speeds up mounting of all Metal
Fining Pads. Also effective for applying abraTwo-Step Pads for Polycarbonate (1.586)
sive or diamond fining pads for plastic lenses.
and Trivex (1.53)
Makes a smooth, wrinkle-free application. It
EL2-400 First Fine, P400, AO film, 7-petal
has a complete cycle time of 7 seconds from
EL2-15 Second Fine, 15 micron, AO film, time pad and lap are placed in position until it
7-petal
is ready for use. A safety door prevents the
EL2-1000 Second Fine, P1000, AO paper, switch from actuating while operator is placing lap in position. This unit has been field
7-petal
tested for reliability and is built to deliver
maximum trouble-free operation. 16” x 12” x
Pad Dispenser
16”. 29lb. Air operation minimum 100lb. line
PSI
pressure needed. No electricity. Air Press with
filter, oiler & regulator. Soft and hard replaceable pads.
EL2-349-7 Ultra (cream), 7-petal
The Manual Pad Press is an economical press
for application of abrasive pads. The unit easily mounts on bench and operates with minimal space requirements. The Manual Pad
Press will apply pads without wrinkling to a
variety of curve ranges.
Assemblies allow the earlier model Optek
surfacing machines to be converted to provide a locked axis setting that cannot be
accidentally knocked out of position. No special changes to the surfacing machines are
required to accept these units.
4000-320
Super Premium Cylinder Pins
385
Pad-A-Lap® Press
PSI
OM-PP1-RB PP1 Pad Press-Rebuilt
Optical Machinery
Optek
For cylinder machines, these pins are produced on an individual basis and individually
inspected. Precision machined from very stable oil hardening tool steel and hardness all
the way through the metal. Long life. Precision
machined shoulder and point provide exact
stickout from pin holder each time. These pins
will recover their additional cost many times
over in avoided lens loss and redo. Sample
sent on request. 4000-103 Sharp, for Optek &
COBURN machines. 4000-198 Round point,
for Optek and COBURN machines using
Shuron Blocks.
For abrasive or metal fining pads. Applies
pads in 2 seconds. Accommodates all flat
back laps. Operates on 80lb shop air. 16”h x
10”w x 13”l.
PSI’s Pad Dispenser is designed for fast and
efficient removal of fining and polishing pads
from their backing. Pad rolls are quickly and
easily inserted. Made of heavy-duty aluminum, the dispenser will give you years of
trouble-free service.
905 single roll dispenser
905-2 double roll dispenser
Satisloh Surface Pad Dispenser
Satisloh
Assorted Fining Pins / Points
Optical Machinery
380
Mounts pad, eliminating waves from wrinkled
pads; air operated plunger with over 1200 lb
of down force; curve conforming surface
applies pads smoothly promoting adhesion to
lap face; 2-handed operation keeps operators
hands out of working area. Operates with air
only. NO electricity necessary.
Pins, Points & Holders
Axis Pin Holder
Coburn
Pad Press
OWC
Fining Points / Pins:
1108 Pins, 205 Sharp - Straight, (5th from left)
80134
ST-328-1/8
ST-329
ST-329-2
ST-329-3
ST-329-4
ST-329-5
ST-329-M
ST-329-S
Pin Holders
Optical Machinery
Exclusively from Satisloh, this adaptable pad
dispenser can be used on top of Satisloh
Toro-X-2S/SL or on a tabletop. Constructed of
durable steel, it dispenses any size roll of fining or polishing pads.
Offers and infinitely adjustable axis control on
Coburn cylinder surfacers. Permits precise
minor axis adjustments.
2937900
Pad Presses
PPI Pneumatic Pad Press
Coburn
Dual palm valve ensures operator safety, large
4-1/2 rubber disk ensures wrinkle-free pad
application, special guide to center laps. 17”h
(43.2cm) x 11”w (28cm) x 12”d (30.5cm), 28lb.
(12.75 kg).
Pins
Coburn
WPP-1 RC Pad Press
OWC
ST-600
ST-601
ST-601S
ST-602
ST-604
ST-614
5000 and 506 Pin Holder Arm
OWC
110600 3/16” x 1-1/8” (0.48cm x 2.9cm)
Points
Mounts pad, eliminates waves from wrinkled
pads. Air-operated plunger with over 1,200lb
of thrust behind resilient curve-conforming
surface applies pad smoothly, improves adhe- Air operated pad press with dual valves to
sion. 18”h x 15”w x 8-1/2”d (38cm x 22cm x insure safety. Uses rubber disc to apply pads
wrinkle-free. 18”(46 cm) H x 15”(38 cm) W x
46cm).
9”(23 cm) D. 34 lbs (15 kg).
PP-1 80450-00
For sphere polisher 901.
Coburn
65700 1/4”–28MT x 1-1/2”
66300 5/16”–24 x 1-3/8” (3.5cm)
77-7100 1/4- 32MT x 1-1/2”
506
P/N 21255-02
Pin Holder Arm 5000
P/N 42208
10/12/11 11:23 AM
148
Pin Holders
Pins, Points & Holders
PSI
Pink Supreme Pad
Polishes
Coburn
506 Pin Holder Arm
774 Polish
OWC
Coburn
506 Pin Holder Arm
P/N 21255
Cylinder Pin Holders
OWC
774 Polish is unlike any other formulation
found in the market. It meets and beats many
higher baume products in performance with
its unique mix of accelerants, antifoam, and
suspension agents. 774 provides exceptional
polycarbonate removals, enhances polishing
efficiencies even on steep curves, and flows
easily to minimize localized heat build up on
high index lenses. This polish has a non-corrosive formula so it cleans easily and is suitable for anti-reflective and hard coats.
Quick change, Positive-lock pin holders for
most cylinder machines. Allows pins to be
changed on machine without resetting axis,
minimizes labor and increases accuracy. All
pin holders include pins at no extra charge.
Typical characteristics
Designed to eliminate wear.
207A
208 Pinholder for Optek machines only.
Pin Holders
Sentilles
pH 3.6 (+/- 0.6)
Baume 18 (+/- 1.5)
Avg. Particle Size 1.7 (+/- 0.5)
1 Gallon Order No. 276321
5 Gallon Order No. 276311
Americal Plus 714 Y Polish
Coburn
Engineered specifically for all materials and
extended polishing cycles, Pink Supreme
combines a high-density, precision cut rayon
fiber with a heavy mass of high shear natural
pressure sensitive adhesive for the latest in
precision pad technology.
Available in high and low tack adhesives for
base or bare lap processing New fiber technology featuring increased polish saturation
and uniform lens support High-density carrier
for added stability and uniform pad compression Natural rubber base adhesive system for
easy removal with no residue Superior surface
quality delivered through exceptional fiber
control
Thickness: Pad material and adhesive: 41.0
mils Liner: 4.5 mils
Peel Adhesion: oz./in. g./in.
Americal Plus 714 Y maintains the same
exceptional stock removal rate of its predePrecision machine holder for 505, 506, 5056
cessor 763 while providing superior surface
and 5000 cylinder surfacers.
quality. Works in both large central slurry sys21425
tems and single bowl applications, easy to
pour, helps retard splashing without affecting
Pins & Points
Hardened Pins:
product flow ability, provides excellent
8520-0206 Pin Sharp w/shoulder
OWC
cleanability and sheeting action to reduce
8520-0505 Pin Blunt w/shoulder for alloy blocks
labor, and cleans easily from lenses improving
Original type pin holder with slot and/or screw coating yields.
to lock in pins. Holder body is made of 1125970 one gallon
Aluminum and with all Stainless Steel hard- 11259-80 five gallon
ware. Order Pins Seperately.
Pin Holder - Original Type
505-29379 Pin holder SA (for Coburn 505-506-50565000)
8520-45272 Pin holder SA (for CMV 8220-8520)
01108 Cylinder Pins 0.30 ea.
80134 Cylinder Pins - Shoulder Type
80195 Sphere Points
Cylinder Pins
Precision Tool
New type pin holders with draw stud to lock in
pin allows pins to be changed with holder
machine mounted. Precise axis adjustments
are made easy with surelock axis screws.
Holders are made of Aluminum and all
Stainless Steel hardware eliminates rusting.
Order pins separately. Visa & Mastercard
Accepted.
Pin Holder – Quick Change
505-505 QC Pin Holder SA (for
Coburn505-506-5056-5000)
8520-45300 QC Pin Holder SA (for CMV 8220-8520)
The finest in cylinder pins. Featuring stainless
construction to prevent rust and carbide ball
tips to maximize service life. The ball tips also
provide smooth orbital action reducing center
wear. Choose from 15, 17, 19 and 22mm tipto-shoulder length; 0.183 and 0.187in. stem
diameter, and 2 thread sizes. We have a pin to
fit your cylinder machine.
Pins, Points & Centers
Sentilles
CE-Rite Great White Polish
PSI
3” 7 petal low tack 282349
80 mm 7 petal low tack 282359
3.5” 7 petal low tack 282369
Base Pad System
3” 7 petal high tack 282379
80 mm 7 petal high tack 282389
Plastic Polishes
Coburn
80469-00
HA-1 and V-2100 Plastic Polishes
Coburn
Insta Mix:
Coburn’s Plastic Polish Series HA-1 and
V-2100 utilize the latest in particle and suspension technology, ensuring compatibility
between its particle and chemical components. Removal rates are maximized while
surface roughness is minimized. Distribution
line and equipment corrosion are eliminated.
Available in one gallon or five gallon sizes.
Coburn
Complete line of pin, points and centers available for sphere and cylinder machines by
Patriot 735 combines the best blend of chemShuron-CMV and Coburn. Centers-Hardened
istry and particle technology with affordability
181-6529 Pin, len body round blunt 5/32” x 1-1/4”
to provide a consistently performing polish.
252-2790 Point, threaded-blunt 3/16” x (252-341-342)
Patriot 735 is economical for labs that rou603-0663 Point, threaded ID 5/16 24 x 1-3/8” (603tinely change out polish and require high sur604-610)
face-quality standards. Patriot 735 is a cost8520-0205 Pin, with shoulder 3/16” x 1-3/8” sharp
effective choice for labs processing a mixture
8520-0206 Pin, with shoulder 3/16” x 1-3/8” blunt
Long life cylinder pins for all blocking sys- 8520-16892 Pin, lens body-blunt
of polycarbonate, plastic, and hi-index lenses.
tems. Last up to four times longer than stan- 8520-45148 Pin (use # 8520-0205)
Physical/Chemical Data: pH: 3.0 - 4.2; Baumé:
dard pins.
8520-45261 Pin, centering-sharp
18° - 22°; Average Particle Size: 1.9 Micron;
205 Blunt, pkg. of 10
88-0238 Pin, len body sharp 5/32” x 1”
Composition (solids): 99.9% Aluminum Oxide.
206 Sharp, pkg. of 10
88-1829 Center hardened
99-0060 Center hardened, regular for Coburn block
Order No. Normal Pad System
Great White is the “white” cerium polish for
glass. It has excellent cleanability and there is
no hard settle, even when left in a system
without agitation. Great White has a lower
concentration due to its excellent suspension.
Packed in a 20 kg pail. Physical/Chemical
Data: pH: 5.8 - 7.5; Average Particle Size: 1.1
-1.8 Micron; Recommended Baumé: 5.0°.
Patriot 735 Polish
206S Short pins for 507 machines
Dynamic Shear: (@12”/min.) Liner side 70 lbs./
sq. in.
Coburn
V210070 HA170 One Gallon
V210080 HA180 5 Gallon
Long Life Pins
PSTC #3; Liner side 74 2,100
11255-70 gallon
11255-80 5 gallon
Equally good for central slurry systems or
single bowl applications. A 2.2lb. (1kg) container products 1 gal. of 22° to 24° Baumé
slurry with excellent flow, suspension and
clean-up characteristics. Requires less storage space, has indefinite shelf life, no freezing
problems.
80680-70 1 gal. box (2.2lb)
Plasti-Sheen™ PST 1.3 Polish
Coburn
Permanent suspension technology eliminates
shaking and stirring by providing continuous
suspension. Consistent performance for
scratch-resistant and AR coatings.
11253-70 One Gallon
11253-80 Five Gallon
Polishes for Glass
Coburn
Rocket 444. An economical cerium oxide for
Rx labs. Compounded to run at 5° to 6°
Baumé, provides consistently fast cycle time.
1.5 to 1.8 micron particles, 6.0 to 7.0pH.
Packaged in 44lb plastic pails.
8044400
10/12/11 11:23 AM
Polishes
Satinal® 774 Plastic Polish
Coburn
Satinal 774 is unlike any other formulation
found in the market. It meets and beats many
higher baume products in performance with
its unique mix of accelerants, antifoam, and
suspension agents. Satinal 774 provides
exceptional polycarbonate removals, enhances polishing efficiencies even on steep curves,
and flows easily to minimize localized heat
build up on high index lenses. This polish has
a non-corrosive formula so it cleans easily and
is suitable for anti-reflective and hard coats.
Typical characteristics
pH 3.6 (+/- 0.6)
Baume 18 (+/- 1.5)
Avg. Particle Size 1.7 (+/- 0.5)
1 Gallon Order 276321
5 Gallon Order 276311
SUPER CE-RITE 415 POLISH
149
SUPER PLASTI-SHEEN SERIES 2030
HA-1 Plastic Polish
V-2100 Plastic Polish
POLISH
DAC Vision
DAC Vision
Coburn
V-2100 is a plastic polish designed specifically for polycarbonate, Hi-Index, and CR-39
lenses. It is ideal for A/R coated and hard
coated lenses. It utilizes water based suspension technology for easy mixing and clean up,
with a high sheeting action that cleans easily
from lenses and won’t stick to equipment. The
focused particle size distribution allows for
rapid removal rate and superior surface characteristics. The polish resists foaming over
H-A1 is a plastic polish designed specifically longer periods of use. Available in 1 gallon
for polycarbonate, Hi-Index, and CR-39 lens- (DV-6058G) and 5 gallon (DV-6058-5) containHigh stock removal rate, reduced polishing es. It is ideal for A/R coated and hard coated ers.
time. Especially recommended for polycar- lenses. It utilizes water based suspension Contact DAC Vision for current pricing.
Victory™ Polish
bonate and hard resin lenses where scratch technology for easy mixing and clean up, with
resistant coatings are to be applied.
a high sheeting action that cleans easily from
DAC Vision
1130370
lenses and won’t stick to equipment. The
1 gallon
focused particle size distribution allows for
1130380
rapid removal rate and superior surface char5 gallon
acteristics. The polish resists foaming over
longer periods of use. Available in 1 gallon
(DV-6057G) and 5 gallon (DV-6057-5) containSuper Plasti-Sheen™ Val-U-Plus
ers.
Polish
Coburn
Coburn
Offers rapid stock removal and is economical.
Stock removal is 70 milligrams per minute.
HD-360™ Premium Lens Polish
DAC Vision
Premium lens polish specifically designed for
one-step fining on all resin materials. A tight
particle size distribution with high removal
rate resulting in a superior finish. Ideal for A/R
and hard coats.
11305-70 Gallon
11305-80 5 Gallon
Americal Plus
DV-7000-5 5 gallon pail
DV-7000G One Gallon
DAC Vision
Blue Rouge 4 oz
OptiSource
A concentrated cerium oxide polishing compound especially processed to cause high
stock removal. Used at very low concentrations to achieve a high luster polish. Excellent
suspension without additives. Works well in
high-speed applications. Packaged in polylined plastic pail.
8033900
44-lb pail
SUPER PLASTI-SHEEN A/R SERIES
2010 POLISH
Coburn
HD-360™ advanced lens polish chemistry
improves clarity and reduces haze on all lens
materials – particularly polycarbonate.
HD-360™ produces outstanding surface quality that is ideally suited for coating. Longevity
is an added benefit as HD-360™ is engineered
to offer extended use when compared to
other premium polishes.
In addition,
HD-360™ maintains consistent Baumé
throughout the life of the polish, while demonstrating excellent suspension characteristics
for consistent results. A low viscosity design
improves flow while reducing pad carry-out,
making clean-up far easier.
Exceptional surface quality on all lens types,
ideal for AR and hard coatings, long life even
in aggressive polycarbonate designated systems. No freeze issues. Unlike other polishes,
Americal Plus can be thawed, mixed and used
after freezing. An alumina-based liquid polishing compound. With stock removal rate of 120 DV-7360G (gallon) DV-7360-5 (5-gallon pail)
milligrams per cycle, it rapidly removes stock Contact DAC Vision for current pricing.
on all types of lenses, regardless of curvature.
Opti-Speed® HI-CE-AIRA Polishing
Its low micron size creates a superior surface.
ST-6026 gallon
ST-6027 5-gallon pail
DGP 2000 Series Plastic Lens Polish
DAC Vision
For critically prepared surfaces where brilliance is demanded for anti-reflective coatings.
03-47.322
Clarity Plus Lens Polish
OptiSource
Compound
DAC Vision
Cerium oxide polish compound for glass.
44lb. container.
ST-891
Quattro Advanced-Chemistry Lens
Polish
1130170
1 gallon
1130180
5 gallon
DAC Vision
SUPER PLASTI-SHEEN PLUS SERIES
2020 POLISH
Coburn
First step compound favored by many for
index materials. Use with solid felt buff and
follow with finish compound for excellent
results.
Clarity Plus Lens Polish can be used as a
PREMIUM GRADE polish. This Lens Polish
can be used on all plastic materials, is HIGHLY
recommended for use with AR coated lens
jobs, and is BEST for Polycarbonate Polishing.
Particle size: (1.1 micron), Baume: (23°).
50-CPP
Aluminum oxide polishing compounds used
on polycarbonate, CR-39 high index lenses.
CR-39 Polish Stick
ST-6088 DGP 2002 Premium Lens Polish
OptiSource
Great White Glass Polish
DAC Vision
Quattro can enhance through put by up to
33%. It also improves clarity with less haze. It
produces unrivaled surface quality for superior coating results. Ideal for free-form systems.
Quattro has a low viscosity for improved flow
and reduced pad carry out. It’s formulation is
friendlyand no-corrosive. It is easy to mix and
saves clean-up time.
Great White is a cleaner alternative for Glass
Polishing. The new white Cerium Oxide offers
excellent cleanability. It is Custom Engineered
for use in low speed applications (less than
Rapid stock removal and excellent finish for 1500rpm), and is designed for use in Single
anti-reflective coated lenses.
bowl or Central Slurry systems. Great White
1130270
provides excellent stock removal and finish, DAC Vision product numbers
1 gallon
and doesn’t hard settle even without agitation.
1130280
·DV-7400G (gallon)
Available in a 20kg pail (DV-892).
5 gallon
·DV-7400-5 (5-gallon pail)
Polish your CR-39 lenses QUICKLY and
EASILY with our CR-39 Edge Polish Stick.
CR-39 Edge Polish Stick, along with our other
“Big Stick” polishing rouge compounds, serve
for use on each lens materials. Use CR-39
Edge Polish Stick to RAPIDLY buff lens edges
to a high luster. Huge 1 lb. bar.
71-BX-7057
10/12/11 11:23 AM
150
Polishes
High-Index Polish Stick
New Horizon (5 Gallon)
Wonder Bar 4 oz
OptiSource
OptiSource
OptiSource
Crystal Kleer 6 oz
OptiSource
Final step polish for use both metals and
plastics.
03-47.328
Polish your High-Index Lenses QUICKLY and
EASILY with our High-Index Polish Stick.
Excellent finish polish for clear and colored High-Index Polish Stick, along with our other
plastics of all types. Especially useful for ZYL. “Big Stick” Polishing Rouge compounds,
03-47.310
serve for use on each lens material. Use HighContact OptiSource for current pricing.
Index Polish Stick to RAPIDLY buff lens edges
to a high luster. Huge 1 lb. bar.
Crystal Plus II
OptiSource
71-BX-7059
New Americal Plus
OptiSource
New Horizon / EP Plastic Lens Polish is a
suspension system which provides RAPID
polishing and long slurry life. New Horizon /
EP Plastic Lens Polish provides a finished
lens surface for AR-coating acceptance. Ideal
for labs that change polish on a weekly basis.
Particle size: (1.7 micron), Baume: (23 - 25°).
Yellow Rouge 5 oz
OptiSource
06-DST60905
Polish All Lens Polish
OptiSource
High gloss polishing compound for all plastic
lens edges. Useful for index lenses.
03-47.327
Zam (Green) 1lb 2 oz
OptiSource
PREMIUM Lens Polish / Crystal Plus II is a
precision aluminum oxide polishing compound that works equally well on Plastic,
Polycarbonate and High-Index Lenses.
PREMIUM Lens Polish / Crystal Plus 2 is the
BEST polish for AR Lenses. Baume: (22.5 24.5°), Particle Size: (1.7 micron).
06-DST6088G
Crystal Plus II (5 Gallon)
OptiSource
PREMIUM Lens Polish / Crystal Plus II is a
precision aluminum oxide polishing compound that works equally well on Plastic,
Polycarbonate and High-Index Lenses.
PREMIUM Lens Polish / Crystal Plus 2 is the
BEST polish for AR Lenses. Baume: (22.5 24.5°), Particle Size: (1.7 micron).
New Americal Plus is a precision lens polish
that is ideal for labs processing high volumes
of Polycarbonate. New Americal Plus also
works great on High-Index and Plastic
Lenses. This Precision Polish RAPIDLY
removes stock on all lenses regardless of
curvature, is EXCELLENT for Hard Resin,
Polycarbonate, and High Index Lenses, is
ideal for AR and hard coatings, and has a pH
of 3.6. Baume: (25-30°), Particle Size: (1.2 - 1.7
microns).
99-AMERICALPOL
Polish All Lens Polish is an aggressive polish
that works well under all conditions at the
MOST ECONOMICAL price. Particle size: (1.7 First step compound for all plastic lens edges.
micron), Baume (23 - 25°).
Good choice for index materials. Follow with
50-PA
finish compound.
Poly Polish Stick
OptiSource
New Americal Plus (5 Gallon)
03-47.503
Polishing Materials for Glass or
Plastic Lenses
OWC
OptiSource
Polish your Polycarbonate Lenses QUICKLY
and EASILY with our Polycarbonate Edge
Polish Stick. Polycarbonate Edge Polish Stick,
Green Rouge 5 oz
along with our other “Big Stick” polishing
rouge compounds, serve for use on each lens
OptiSource
material. Use Polycarbonate Edge Polish
New Americal Plus is a precision lens polish
Stick to RAPIDLY buff lens edges to a high
that is ideal for labs processing high volumes
luster. Huge 1 lb. bar.
of Polycarbonate. New Americal Plus also
71-BX-7058
works great on High-Index and Plastic
Lenses. This Precision Polish RAPIDLY
Red Rouge 6 oz
removes stock on all lenses regardless of
curvature, is EXCELLENT for Hard Resin,
OptiSource
Polycarbonate, and High Index Lenses, is
ideal for AR and hard coatings, and has a pH
First step compound for all plastic lens edges. of 3.6. Baume: (25-30°), Particle Size: (1.2 - 1.7
Use with solid felt buff and follow with finish microns).
99-AMERICALPOL5
compound.
06-DST60885
03-47.321
HA-1 Lens Polish
Polishing materials for both glass and plastic
lenses. Plastic Lens Polish.
S94201 Americal Plus
S94600 Cerite Rx
Americal Plus
PSI
New Horizon
OptiSource
Edge polish for glass lenses and metal
frames. Water Soluble.
OptiSource
03-47.324
HA-1 Lens Polish has a thinner viscosity making it VERY “user friendly” in all systems. HA-1
Lens Polish will not cake up and it flows
EASILY. Particle Size: (2.0 micron), Baume
(24°).
New Horizon / EP Plastic Lens Polish is a
suspension system which provides RAPID
polishing and long slurry life. New Horizon /
EP Plastic Lens Polish provides a finished
lens surface for AR-coating acceptance. Ideal
for labs that change polish on a weekly basis.
Particle size: (1.7 micron), Baume: (23 - 25°).
Americal Plus has been improved to perform
equally on all lens materials (plastic, polycarbonate, high and mid-index). Manufactured
White Rouge 5 oz
under tight particle size distribution controls
OptiSource
to ensure consistently high cut rates while
maintaining a brilliant surface. Superior suspension system that will not hard settle or
cake on equipment. Increased viscosity for
pouring ease and to retard splashing without
affecting product flowability. No freeze issues.
Maintains performance even after being frozen and thawed. Ideal for AR and hard coated
lenses. Formulated to work in both large central slurry systems and single bowl applicaFinal high gloss finish polishing compound for tions. Non-foaming.
all plastic lens edges.
3320G gallon
50-HA1
06-DST6090G
03-47.326
3320P 5-gallon pail
10/12/11 11:23 AM
3315 gallon
Reliance XL Plastic Polish
3315P 5 gallon pail
Block Centers
Brilliance
Pristine
PSI
PSI
PSI
151
Specifications/Size:
63” x 74” x 75” (including conveyor)
Weight:
2138 lb (approx.)
Electrical Requirements:
200-480 V, 50/60 Hz, 3 phase, 8 kW, 16 A
breaker
Satisloh Poly-Pro Polish
Satisloh
Brilliance is a new chemistry polish that offers
exceptional polycarbonate removal. It flows
easily, minimizing localized heat build up on
high index lenses. It produces a high-grade
surface quality while utilizing enhanced polishing efficiencies even on steep curves. It is
non-corrosive, cleans easily and has noticeable lower carry out. Brilliance is suitable for
AR and other hard coatings.
3335G
Gallon
3335P
5-gallon pail
Foam Free Polish Defoamer
PSI
Pristine is a premium grade plastic polish that
was developed for polycarbonate but works
great on all lens materials. It imparts a high
surface quality on all materials while offering a
high Baumé of 27°. It has exceptional suspension and sheeting action and lasts a long
time. It is excellent for AR and backside coating applications.
3330G
Gallon
3330P
5-gallon pail
PSI Clear
PSI’s Reliance XL is a quality, economical
plastic lens polish. It is designed for use on
processing lines with a mix of all lens materials. Reliance XL utilizes the newest antifoam
and non-freezing formulations. it is a good
polish for AR coating applications. Reliance
XL will work well in single bowl and central
slurry applications maintaining a consistent
Baume’ reading. It offers consistent stock
removal rates on plastic, mid-index, highindex and polycarbonate with a surface qualA premium polish for one-step fining of all
ity rating of 7.5.
materials, with new cutting agent technology
3317P 5 gallon pail
Item #3317G gallon
developed for unsurpassed high-speed polyContact PSI for current pricing.
carbonate processing. It produces exceptional surface quality on all plastics including
Aspire 900
polycarbonate while exhibiting excellent susSalem
pension properties. It significantly reduces
haze and helps eliminate swirls on polycarbonate — making it the perfect single polish
solution for all organic materials. Ideal for AR
and hard coatings.
1-gallon bottle
5-gallon pail
PSI
Slim Chill
Satisloh
Foam Free is a powerful, silicone-free
defoamer. It quickly eliminates bubbles and
foam from polishing compounds. It comes in
a mess free, 8 oz. dropper bottle. Just add
one drop at a time up to 10 drops for each PSI Clear is a non-conventional polish for
gallon of polish until foam dissipates
conventional hard lap polishers. The newgeneration lens polish is designed to optimize
2180
the performance of conventional polishers by
Glass Polish
incorporating revolutionary features, which
your customers, operators and inspectors will
PSI
love. It does not cause dermatitis and contains an ingredient that will prevent hands
from drying out. PSI Clear is a long-lasting
polish with a uniquely stabilized suspension
chemistry and alumina crystal structure that
makes it durable and cost-effective. It combines traditional density and solids with low
Baume and viscosity to reduce carryout and
improve pad and lens coverage.
PSI offers a variety of glass polishes to meet 3301G Gallon
any labs needs. Super Pol #7, Item #419 is a 3301P S-gallon Pall
dependable yet economical polish that is Contact PSI for current pricing.
suspension treated. Super Ce-Rite, Item #415
PSI-Lite 10
is a concentrated premium grade polish that
is good for high-speed applications. It is susPSI
pension treated and offers high stock removal. Cerox, Item #1663 is a high quality glass
polish with a consistent surface finish and
works well with fast polish times.
Aspire 900 is a high performance plastic lens
polish that is ideal for both digital and traditional plastic lens poliishing applications. It
has been engineered to provide superior
removal rates and produce superior surface
finishes on all types of plastic lens surfaces
including
CR-39,
High
Index
and
Polycarbonate materials. Aspire 900 has been
suspension treated to avoid hard settling
making it easy to re-disperse upon shaking to
Designed for use with Satisloh’s Flexible
ensure optimum performance.
Contact Salem for current pricing.
Polishing Systems, but can also be used with
conventional polishing systems, the Slim-Chill
Americal Plus
200 optimizes lab performance and space
Satisloh
with measurable results. A self-contained unit
that employs a fully hermetic compressor and
Americal Plus provides exceptional surface CFC-free refrigeration to maintain constant
quality - significantly reducing haze. Its versa- cool temperatures, eliminating unwanted fluctility offers the laboratory a single polish solu- tuations and dramatically reducing lens
tion for all organic materials - it can be used in defects. Internal filtration system provides
any polish re-circulation system, including a debris-free polish — extending polish life.
one-tank operation as well as a large central
slurry system. It’s ideal for AR and hard coat- Specifications/Size:
ings. Available in 1-gallonm & 5-gallon con- Power requirements:
tainers.
220 V, 1 ph or 3 ph
Duo Flex
Dimensions:
Satisloh
33 x 25 x 52”
Weight:
350 lbs.
Toro Flex
Satisloh
High Pro
PSI
PSI-Lite 10 is formulated for maximum stock
removal and excellent surface quality. Works
well with central slurry systems or in a single
bowl. Excellent sheeting action reduces costly clean up. Little or no foaming throughout life
High Pro is designed by Transelco for labs of polish. Available in gallons or 5 gallon pails.
that run high production and require a high 3313-G gallons
surface quality rating. It has aggressive stock 3313P 5 gallon pails
removal and the Baume´ range is 29-32.
Duo-Flex is a soft tool polishing system for all
organic materials and lens formats. It’s a fully
automated, dual lens, CNC controlled polishing system providing outstanding price/performance ratio in terms of surface quality,
form accuracy, process stability, throughput
and economics. It uses only 7 polishing cap
types – covering the full working range of freeform, toric or spherical lenses. Polished lenses are pre-cleaned and dried in a washing
station before returning to the tray – avoiding
slurry residue on lens surfaces. Tool management software selects appropriate polishing
tool according to lens curvature.
Manual dual action soft tool polishing system
for all organic materials and lens formats, the
Toro-FLEX was especially designed for easy
operation in today’s lens production. Two
lenses are loaded simultaneously into the lens
polishing spindles as well as two flexible polishing tools. The new tangential polishing
10/12/11 11:23 AM
152
kinematic ensures optimized process and lens
quality by improved tool/lens adaptation as
well as equally distributed polishing slurry at
all times. The polished lenses can be precleaned and dried using the water-spray as
well as air gun and basin before putting back
into job tray.
Compressed Air::
Satisloh Retrue Services
~ 20 NL/min average,
min. 6 bar (max. 10 bar),
dried and oil-free
Specifications/Size:
(wxdxh):
Retruing Services
695 x 1270 x 1632 mm /
Retruing Service for Generator &
Edger Wheels
26 x 50 x 64 inches;
incl. lens washing basin
PSI
Weight:
Satisloh
Sponges
100 NL/min peak
Approx. 300 kg / 661 lb
Owners of Satisloh’s V-Series Generators
know that using Satisloh diamond inserts
maintains the factory performance standards.
To maintain this standard of quality, we’ve
developed the convenient Satisloh Insert
Exchange Program. No diamond tool company in North America has access to the factory
specifications to produce the diamond cutter
inserts and tool bodies, or to provide resharpening service on the PCD inserts. Utilizing the
Satisloh Insert Exchange Program assures
that you’re receiving the quality parts necessary to maintain factory performance standards. Only parts and service from the
German diamond manufacturer can guarantee
top performance.
100% reconditioning of diamond generator
and edger wheels. Retruing of radius and
Electrical Requirements:
surfaces. Each wheel is abrasive-stick
220-240 V, 50/60 Hz, 1 phase (resp. 2 phases dressed to ensure maximum grinding effiin 115 V supply), grounded shield, 4 kVA, 16 A ciency. Normal 48-hour turn-around service.
breaker
Lens Scrub Sponges
Sentilles
Unique surface provides better residue
removal before coating application. Designed
for use with Pre-coating Lens Cleaner but
works very well with other cleaners too. Each
sponge is 2-1/2” x 4”.
1-4090 package of 12
Advertisers Guide
BPI - (800-CALL-BPI or 800-225-5274)
www.callbpi.com . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 85, 93
Briot - (800-292-7468)
www.briotusa.com . . . . . . . . . . . . . . . . . . . . . . . . . . Front Cover, Edgers Tab, pg. 105, 107
Coburn Technologies - (800-Coburn-1 or 800-262-8761)
www.coburntechnologies.com . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 3
Digital Vision Inc. - (503-231-6606)
www.thedvi.com. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 13
DigitalTrace™ - (877-524-7265)
www.DigitalTrace.net . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 19
Optivision, Inc. - (800-795-9927)
www.optivision.com . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 15, 69, 129
Salem Vision Group - (800-234-1982)
www.salemdist.com . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Inside Front Cover
Schneider Optical Machines - (972-247-4000)
www.schneider-om.com . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
Visionix - (678-456-1100)
www.visionix.com . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . for ad pages, see Briot
10/12/11 11:23 AM
The Ultimate Eyewear App for iPhone & iPad and Android.
Before you purchase your next pair of eyeglasses or
sunglasses, check out Eyetrends.
nds.
ds.
EyeTrends lets you search, browse and try on
your favorite eyewear styles.
EyeTrends sends you valuable rebate coupons
and geo locates your nearest retailers.
www.eyetrendsapp.com
App Features
Search
Try-On
Locate
Save
Tens of thousands of styles from hundreds
of designer brands.
Geo-Locate your nearest retailers to
make your next purchase.
www.jobsoninternetsolutions.com
Virtually try-on your favorite styles and
share your look with family and friends.
Big with great coupons for frames,
sunglasses, lenses and coatings.
Powered by Jobson Internet Solutions
All-in-one digital surfacing center
LMS
LDS
Generator
Marking
Measuring
Revolutionary digital surfacing.
DSC Prolab – The all-in-one digital surfacing center opens the door
to a new world of easy to handle integrated surfacing centers. With
the combination of generator, polisher, laser marker and measuring
unit, you get a whole digital surfacing lab in one compact system. The
full integration of the lab management system and the lens-design
software make the DSC Prolab a self-sufficient surfacing center. If you
normally picture a large production line to make digital lenses, it’s
time to refresh your perception of what is needed to manufacture topquality lenses.
SCHNEIDER GmbH & Co. KG
Brueckenstrasse 21
35239 Steffenberg, Germany
Phone: +49 (64 65) 91 44 - 0
www.schneider-om.com
SCHNEIDER Optical Machines
5916 Stone Creek, Suite 120
The Colony, Texas 75056, USA
Phone: +1 (972) 247-4000
[email protected]
Polishing

finishing tools

Transcription

Similar documents

25% off the entire frame and lenses price, if the frame retail is below

The author has no financial interest to disclose. How Many of your

ART Pricing Model - Al

Portatile e senza fili, per uno screening di qualità Portatile e senza

The Architecture of the Model

Profitero Customer Success Story - Tokmanni

Bio 1 Lab 2 review Hadley - Biology-Lab-1

Spec Sheet - N-Vision Optics PVS-7

Givi V46 reflective decal installation instructions: