DuctSox Technical details - Smooth

Transcription

Products Ltd
DuctSox
Product Families
®
DuctSox
Fabric
®
Product Families
DuctSox
Fabric Duct Ventilation
Discover the
Product Families
Traditional DuctSox
Custom engineered air dispersion systems for open
or finished ceiling applications.
Advantages of
DuctSox Air Dispersion
Product Families
raditional
51a
DuctSox Systems
Previous Page
DuctSox are an attractive and cost effective alternative for exposed metal HVAC
ductwork and diffusers. Constructed of fabric, our systems
available
in round
DuctSoxare
Systems
discharge
air
Critical Environments
or surface mount shapes for horizontal or vertical orientations.
We also have
a
through a combination
of porous
DuctSox Systems discharge air
TM
and
large variety of fabric types, ranging from our recycled
content
Coronado
fabrics,
engineered
orifices,
through a combination of porous
Sedona-XmTM fabrics to our economy grade EkoTexTM.
and linear vents. Smoke testing
fabrics, engineered orifices,
reveals
uniform
flow patterns
Different
than
conventional
metal,
fabric
products
are
engineered
andair
manufactured
and linear vents. Smoke testing
for
each
project.
DuctSox
designs
can
be
simple,
straight
systems
or
very
intricate
in
all
of
our
DuctSox
products,
reveals uniform air flow patterns
layouts which incorporate fittings such as radius elbows,
Ts, andthe
transitions.
Sections
including
traditional
DuctSox
in all of our DuctSox products,
are zippered together to form extended lengths with diameters from 6 to 80 inches
System
(pictured
middle),
including the traditional DuctSox
(0.15m to 2.03m).
or finished ceiling applications.
LabSoxTM (pictured left), and
System (pictured middle),
Previous Page
DuctSox
UFSoxTM (pictured right).
Whether industrial, retail, education, commercial, government,
warehousing,
Critical
DuctSox are
available in both
UFSoxTM (pictured
right).Environments
laboratory, food processing, temporary or permanent, porous
if it’s anand
open
ceiling or fabrics.
non-porous
DuctSox are available in both
fi
nished,
DuctSox
offers
a
proven
choice.
Custom engineered air dispersion systems
for traditional DuctSox System
The
porous
and non-porous fabrics.
or finished ceiling
applications.
critical environments.
shown on the cover is a nonThe traditional DuctSox System
porous fabric. The photo below
shown on the cover is a nonritical Environments
is a DuctSox in a porous fabric.
Underfloor
Air
Distribution
porous fabric. The photo below
DuctSox products have been accepted within key industry organizations such as
Smoke testing shows air passing
is a DuctSox in a porous fabric.
ASHRAE, Underwriter’s Laboratories (U.S. & Canada), International Code Council, and
many local building authorities throughout the world. through the fabric mixes with
Smoke testing shows air passing
the air dispersion jet.
through the fabric mixes with
To maintain market leadership, DuctSox tries to offer the best products, designs, and
the air dispersion jet.
sales support in our industry. More than evolving our standard products, DuctSox
strives to be the leader in the industry through our commitment to quality, service,
innovation.
Custom engineered air and
dispersion
systemsThis
for commitment has allowed us to expand our product offerings,
critical environments. including LabSox and UFSox.
LabSoxTM (pictured left), and
DuctSox Corporation
REDEFINING AIR DISPERSION
DuctSox’s corporate goals include developing and maintaining a global distribution
and manufacturing strategy, as well as developing innovative products while providing
Underfloor Air Distribution
customer solutions.
Custom engineered air dispersion systems for
critical environments.
Custom engineered air distribution and dispersion
If you’d like to learn
more for
about
our DuctSox
products or view photos of installations
systems
underfloor
applications.
INNOVATION
WHO WE ARE
Product Families
SmoothTraditional DuctSox
DuctS
DuctSox a
ductwork a
or surface
large varie
Sedona-Xm
Different t
for each p
layouts wh
are zippere
(0.15m to
Whether in
laboratory
finished, D
DuctS
DuctSox p
ASHRAE, U
many loca
To maintai
sales supp
strives to b
and innova
including L
DuctSox’s
and manu
customer s
If you’d lik
throughou
throughout the world, please contact us.
nderfloor Air Distribution
201
www.ducts
Our Products
DuctSox Products are Fabric Ductwork and Diffuser Systems used for heating, cooling, or ventilating.
They are a cost effective, aesthetically attractive alternative to metal ductwork and diffusers. Each DuctSox
System is 100% custom made, starting from the engineering design to the manufactured product.
DuctSox designs can be simple, straight systems or have very intricate layouts.
2012
systems for underfloor applications.
DuctSox offers the best products, design, and sales support in our industry. We strive to lead through
a commitment to quality, service, and innovation. DuctSox products have also been accepted
within key industry organizations such as ASHRAE, Underwriters Laboratories (U.S. & Canada),
www.ductsox.com
International Code Council, and many building authorities throughout the world.
on next page
systems forContinued
underfloor applications.
3 June 2014
Technical Catalogue
0800 SMOOTH (0800 766 684) 264 Annex Rd, PO Box 8358, Riccarton 10a Te Puni St, Petone (PO Box 8358, Chch)
6 Stanway Pl, PO Box 12-243, Penrose 2013
See also Price Catalogue pp28a-28b
Due to a policy of continuous development, prices and specifications are subject to change without notice.
Smooth-Air
Christchurch: Wellington: Auckland: 5
www.smooth-air.co.nz
www.ductsox.com
Ph +64 3 343 61845
Ph +64 4 566 7969 Ph +64 9 579 3257
[email protected]
Fax +64 3 343 6004
Fax +64 4 566 3143
Fax +64 9 579 3259
See www.smooth-air.co.nz for most recent pricing
51a
Innovations
Smooth1994
uSda approval
INNOVATION
Food Processing
Industrial
Microbe-X
High-Throw (Orifices)
Fittings
Fabric vs.
Metal 1996
Innovations
Warehousing
Applications
Stainless Steel V-Track
poolS
Stat-X
Considering
the many
of engineered
textile systems
conventional metal duct and
diffusers,
more and more are
Food
Processing
Airbenefits
Permeable
Fabrics
First over
Patent
1980
Gymnasiums
considering a DuctSox Air Dispersion System for their open
ceiling applications.
H-Track
uSda
approval
Mesh
Vents
1994
Industrial
Grocery
Microbe-X
Screen Printing
1998
Clean appearance
lower
Cost
precise design Control
Flow Straightener
High-Throw (Orifices)
Warehousing
Colorful / personalization
uniformFittings
air dispersion
Sedona easy to Ship
retail
ul-ClaSSiFiCation
lightweight
balancing
Stainless
Steel V-Track
1996minimal
no Condensation
2000
Stat-X
First
Patent
Quiet
H-Track
Efficient
Mesh
Vents
Innovations
Innovations
1998
Screen Printing
Flow Straightener
1994
1994
uSda
uSda
approval
approval
Sedona
FAbRIC ul-ClaSSiFiCation
2004
Microbe-X
Microbe-X
Custom engineered air
TufTex
High-Throw
High-Throw
(Orifices)
(Orifices)
2000
dispersion
system (UL-2518)
ICC-AC-167
Fittings
Fittings
Stat-X
Stat-X
First
First
Patent
Patent
H-Track
H-Track
Mesh
Mesh
Vents
Vents
2002
Screen
Screen
Printing
Printing
2004
Flow
Flow
Straightener
Straightener
Sedona
Sedona
Convention Centers
Grocery
Stadiums/Arenas
retail
METAL SYSTEMS
adjuStable Flow deviCe
Localized diffusers,
Sedona-Xm
Classrooms
duct, and dampers
Warehousing
Warehousing
FinalFilter
Waterparks
FitneSS CenterS
Convention Centers
Stadiums/Arenas
4x2 Suspension
LabSox
Grocery
Grocery
CFD Analysis
Data Centers
Churches/Auditoriums
laboratorieS
Waterparks
FitneSS CenterS
Cleanroom
ClaSS FabriCS (rx)
retail
retail
08
Gymnasiums
3D Drawings
Industrial
Industrial
Laser Cut Vents
Gymnasiums
Gymnasiums
adjuStable Flow deviCe
improved productivityClassrooms
performance guarantee
poolS
poolS
3x1 SuSpenSion
3D Drawings
Sedona-Xm
FinalFilter
20
10 Year Warranty
Coronado (patterns)
Applications
Applications
10 Year Warranty
Coronado (patterns)
Sonic Venting
DuraTex
Verona
2006
Gripple Drop Supports
Comfortable environment
available recycled Content
Sonic Venting
Hygienic
DuraTex
Verona
Gripple
Drop
Supports
Food
Food
Processing
Processing
2002
AirAir
Permeable
Permeable
Fabrics
Fabrics
Stainless
Stainless
Steel
Steel
V-Track
V-Track
poolS
TufTex easy installation
ICC-AC-167 (UL-2518)
Flexible
1980
1980
98
998
Air Permeable Fabrics
DuctSox (Cont.)
51b
996
1996
1980
Applications
Products
Ltd
Pharmaceuticals
Displacement Ventilation
FAbRIC IS MORE EFFICIENT THAN METAL
Office Settings
UnderFloorSox
Data Centers
Classrooms
TufTex
000 TufTex
Extensive energy study by IowaClassrooms
State
University confirmed DuctSox with linear vents brought the
ChemSox
ICC-AC-167
ICC-AC-167
(UL-2518)
(UL-2518)
temperature of the space up 24.5% faster than equivalent metal. For more information, scan:
3x1 SuSpenSion
Acidic Production
4-Color Personalization
2006
Laser
Cut
Vents
Convention
Convention
Centers
Centers
Sonic
Sonic
Venting
Venting
2 DuraTex
SimpleSox
Considering the many benefits of engineered
textile systems over conventional metal duct and diffusers, more and more are
DuraTex
4x2 Suspension
Recording Studios
2010
U-Track
Verona
Verona
considering
a DuctSox Air
Dispersion System
for theirStadiums/Arenas
open
ceiling applications.
laboratorieS
Stadiums/Arenas
LabSox
Glider for Cable or Track
Gripple
Gripple
Drop
Drop
Supports
Supports
CFD Analysis
Food
Processing
Food
Processing
large oFFiCe buildingS
SkeleCore
3D3D
Drawings
Drawings
Pharmaceuticals
Waterparks
Waterparks
Clean appearance
lower Cost
precise design
Control
Energy Study
Cleanroom
ClaSS
FabriCS (rx)
20Flow
08
Displacement
Ventilation
adjuStable
adjuStable
Flow
deviCe
deviCe
Industrial
Industrial
Colorful / personalization
easy to Ship
uniform air
dispersion
Kitchens
Office Settings
Sedona-Xm
Sedona-Xm
UnderFloorSox
FitneSS
CenterS
CenterS
Fixed NozzlesFitneSS
Comfortable environment
lightweight
minimal balancing
FinalFilter
FinalFilter
SkeleCore FtS
ChemSox
Warehousing
Warehousing
1010
Year
Year
Warranty
Warranty
Medical
SkeleCore IHS
easy
installation
no
Condensation
Acidic Production improved productivity
Data
Data
Centers
Centers
4-Color Personalization
Coronado
Coronado
(patterns)
(patterns)
ul-ClaSSiFiCation
ul-ClaSSiFiCation
Fabric vs. Metal
Applications
Applications
poolS SimpleSox
poolS
3x1
3x1
SuSpenSion
SuSpenSion
Efficient
U-Track
Glider for Cable or Track
Gymnasiums
4x2
4x2
Suspension
Suspension Gymnasiums
SkeleCore
LabSox
LabSox
Energy Study
FD
CFD
Analysis
Analysis
Grocery
Grocery
FAbRIC
leanroom
Cleanroom
ClaSS
ClaSS
FabriCS
FabriCS
(rx)
Fixed(rx)
Nozzles
Custom engineered air
splacement
Displacement
Ventilation
Ventilation
retail
retail
SkeleCore FtS
dispersion system
UnderFloorSox
derFloorSox
SkeleCore IHS
Classrooms
Classrooms
hemSox
mSox
olor
-Color
Personalization
Personalization
Convention
Centers
Convention
Centers
mpleSox
leSox
Adjustable Nozzles
ck
rack
der
forfor
Cable
Cable
or or
Track
Track
Stadiums/Arenas
Stadiums/Arenas
eCore
ore
gy
Study
Study
Waterparks
Waterparks
eCore
ore FtS
FtS
eore
IHSIHS
FitneSS CenterS
3 June 2014
laboratorieS
laboratorieS
Pharmaceuticals
Pharmaceuticals
large oFFiCe buildingS
Crop Science
METAL
SYSTEMS
Kitchens
Localized diffusers,
Office
Office
Settings
Settings
duct, and dampers
Medical
Acidic
Acidic
Production
Production
Aerospace
Recording
Recording
Studios
Studios
Crop Science
Kitchens
Kitchens
Medical
Medical
FAbRIC IS MORE EFFICIENT THAN METAL
University confirmed
Extensive
energy(0800
study766
by Iowa
DuctSox with linear vents brought
the
0800
SMOOTH
684)State
[email protected]
264temperature
Annex Rd, PO
Box
8358,
Ph +64
3 343
Fax +64 3 343 6004
of the
space
upRiccarton
24.5% faster than equivalent
metal.
For6184
more information, scan:
Aerospace
Aerospace
10a Te Puni St, Petone
(PO Box 8358, Chch)
Ph +64 4 566 7969 Fax +64 4 566 3143
6 Stanway Pl, PO Box 12-243, Penrose Ph +64 9 579 3257
Fax +64 9 579 3259
Technical Catalogue
laboratorieS
laboratorieS
available recycled Content
Aerospace
Recording Studios performance guarantee
Adjustable Nozzles
Due to a policy
of continuous development, prices and specifications are subject to change without notice.
FitneSS
CenterS
Smooth-Air
Christchurch:
Data
Centers
Data
Centers
Wellington: Auckland: 51b Churches/Auditoriums
Nozzles
e Nozzles
Hygienic
large
large
oFFiCe
oFFiCe
buildingS
buildingS
Continued on next page
Nozzles
zzles
Flexible
Quiet
2010
Laser
Laser
Cut
Cut
Vents
Vents
Crop
Crop
Science
Science
Smooth-
Products Ltd
DuctSox (Cont.)
Key Considerations
51c
Traditional DuctSox
Configuring a DuctSox System
There are Five key elementS to consider
when configuring a DuctSox System.
1
SHAPE/SUSPENSION/FAbRIC RETENTION
2
LAyOUT/FITTINGS
3
AIR DISPERSION
4
FAbRIC
5
OPTIONS
Further detail on each is explained in the pages that follow.
Engineering, Design, and Layout Criteria
Besides the Key Elements of configuring a DuctSox System, there is additional criteria/information needed to ensure that it
is engineered and designed correctly to provide the best performance possible. Typical information required includes the following;
} VOLUME OF AIR AT THE INLET OF THE DUCTSOX
} STATIC PRESSURE AT THE INLET OF THE DUCTSOX
} AIR THROW MODELS
• High-throw
• Comfort-Flow
• low-throw
} AIR DISPERSION REqUIREMENTS bASED ON APPLICATION NEEDS
• Heating, cooling, and ventilation
• Supply-side air, air makeup, air destratification, and air displacement
• uniform air dispersion
• Spot heating and cooling
• Versatile and multiple airflow designs
• terminal velocity
} CONDENSATION
} HANGING HEIGHT
} DESIGN LAYOUT
To ensure proper system design,
Smooth-Air staff are available for
assistance
} NOISE
} INSTALLATION REqUIREMENTS AND LIMITATIONS
} COST
See also
Price Catalogue
pp28a-28b
To ensure proper system design, DuctSox Inside Sales and Engineering staff are available for assistance.
Or, review
the
DuctSox Design Manual at www.ductsox.com.
Smooth-Air
0800 SMOOTH (0800 766 684) www.smooth-air.co.nz
[email protected]
Christchurch: 264 Annex Rd, PO Box 8358, Riccarton Ph +64 3 343 6184
Fax +64 3 343 6004
Wellington: 10a Te Puni St, Petone (PO Box 8358, Chch)
Ph +64 4 566 7969 Fax +64 4 566 3143
Auckland: 6 Stanway Pl, PO Box 12-243, Penrose Ph +64 9 579 3257
Fax +64 9 579 3259
3 June 2014
Technical Catalogue
51c
Smooth-
Layout
andand
Fittings
Layout
Fittings
51d
Products Ltd
DuctSox (Cont.)
Layout
Because the entire DuctSox System is a diffuser, air dispersion and distribution are combined allowing simple and efficient
layouts compared to metal duct systems.
Layout
Because the entire DuctSox System is a diffuser, air dispersion and distribution are combined allowing simple and efficient
layouts compared to metal duct systems.
DuctSox
DuctSox
Metal Duct/Diffusers
Fittings
Metal Duct/Diffusers
Not every application is a straight line of DuctSox. To accommodate this, we offer a variety of standard fittings (as shown below).
We also offer custom fitting configurations.
Fittings
Not every application is a straight line of DuctSox. To accommodate this, we offer a variety of standard fittings (as shown below).
We also offerRADIUS
custom fitting
configurations.
ELbOWS
RADIUS ELbOWS
30º
45º
60º
90º
45º
60º
90º
TRANSITIONS
30º
TRANSITIONS
Top-Aligned
Center-Aligned
bottom-Aligned
Round to D-Shape
Center-Aligned
bottom-Aligned
Round to D-Shape
Top-Aligned
Center-Aligned
bottom-Aligned
Under
Top-Aligned
3kg/m
Center-Aligned
bottom-Aligned
Top-Aligned
Center-Aligned
bottom-Aligned
Top-Aligned
Center-Aligned
bottom-Aligned
SADDLE T’S
Top-Aligned
SADDLE T’S
CROSSES
60kg/m
CROSSES
51d
Smooth-Air
Christchurch: Wellington: Auckland: 3 June 2014
6 Stanway Pl, PO Box 12-243, Penrose Technical Catalogue
Ph +64 3 343 6184
Ph +64 4 566 7969 Ph +64 9 579 3257
[email protected]
Fax +64 3 343 6004
Fax +64 4 566 3143
Fax +64 9 579 3259
Smooth-
Products Ltd
DuctSox (Cont.)
Air-Porous Fabric
Supply air is delivered exclusively through porous fabric.
Air-Porous Fabric
Supply air is delivered exclusively through porous fabric.
Flow rate through fabric
controlled by weave and
pressure from 1 - 200 FPM
(.005rate
- 1.016
m/s).
Flow
through
fabric
controlled by weave and
pressure from 1 - 200 FPM
(.005 - 1.016 m/s).
Ideal for cooling only; food processing,
displacement, or critical environments.
Ideal for cooling only; food processing,
displacement, or critical environments.
Linear Vents
Airflow throw up to 90 ft. (27,432mm)
} Delivers airflow through precision cut
orifice patterns
Linear
Vents
AirAir
Dispersion
Dispersion
51e
} Vent size referenced by airflow
} Delivers
per linearairflow
foot through precision cut
orifice patterns
} Unlimited
Vent size referenced
airflow
flexibility in by
designing
per linear
footlocation for
vent
size and
optimum airflow control.
Unlimited flexibility in designing
vent size and location for
optimum airflow control.
Most common method for heating and
cooling; high entrainment from outlets
provide uniform temperature and less
drafts,
creatingmethod
a comfortable
environment.
Most common
for heating
and
cooling; high entrainment from outlets
provide uniform temperature and less
drafts, creating a comfortable environment.
Nozzles
Provides jet-type airflow. Type, location, and quantity based on airflow requirements. Available in a variety of colors.
Nozzles
Fixed
Adjustable
Straightjet-type
flow
Directional
flow on airflow requirements. Available in a variety of colors.
Provides
airflow. Type, location, and quantity
based
or closed
or closed
Fixed
Adjustable
Straight flow
or closed
Directional flow
or closed
Cap to close
Change direction
of airflow or close
Cap to close
Change direction
of airflow or close
Orifices
} Orifice sizes: ½" - 5" (12.7mm -
127mm) diameter/SG outlets
Orifices
2" or 3" (51mm or 76mm) diameter
Common choice for spot cooling, heating,
or ventilating. Directional Nozzle helpful for
airflow control to create a more comfortable
environment.
Common
choice for spot cooling, heating,
or ventilating. Directional Nozzle helpful for
airflow control to create a more comfortable
environment.
Airflow throw by orifice size & pressure,
up to 150 ft. (45,720mm)
Airflow throw by orifice size & pressure,
up to 150 ft. (45,720mm)
}
½"orientation
- 5" (12.7mm
} Orifice
Orifice sizes:
size and
based
127mm)
diameter/SG
outlets
on required
air throw distance
2" or 3" (51mm or 76mm) diameter
} Orifice size and orientation based
on required air throw distance
Smooth-Air
Technical Catalogue
6 Stanway Pl, PO Box 12-243, Penrose For heating and cooling, Orifices are ideal for
areas requiring extended and precise throw
such as recreation, arenas, convention centers,
retail,
industrial,
warehouses,
or are
spotideal
cooling.
For
heating
and cooling,
Orifices
for
areas requiring extended and precise throw
such as recreation, arenas, convention centers,
retail, industrial, warehouses, or spot cooling.
Ph +64 3 343 6184
Ph +64 4 566 7969 Ph +64 9 579 3257
[email protected]
Fax +64 3 343 6004
Fax +64 4 566 3143
Fax +64 9 579 3259
51e
Smooth-
Fabric
51f
Products Ltd
DuctSox (Cont.)
Fabric:
Standard Features/Options
glider attachment
(used for both
track and Cable)
Zippered
endcap
linear vents
(Nozzles or Orifices also available)
Fabric
Type
Specifications
Colors
Other
Sedona-XmTM
Fire Retardant Polyester, Filament/Filament Twill
55% Recycled Content
Weight:
6.8 oz/yd2 (231g/m2)
Porosity:
2 CFM/ft2 @ 0.5" w.g. (10.2L/s/m2 @ 125Pa)
Classified by Underwriters Laboratories in accordance with the requirements of NFPA 90A,
ICC/AC167 (Acceptance Criteria of Fabric Air Dispersion Products), and UL 2518
TufTexTM
Weave:
Fire Retardant Polyester, Plain Weave, Coated
Weight:
8.2 oz/yd2 (278g/m2)
Porosity:
None
ICC/AC167 (Acceptance Criteria of Fabric Air Dispersion Products), and UL 2518
VeronaTM
Weave:
Weight:
6.2 oz/yd2 (210g/m2)
Porosity:
2 CFM/ft2 @ 0.5" w.g. (10.2L/s/m2 @ 125Pa)
ICC/AC167 (Acceptance Criteria of Fabric Air Dispersion Products), and UL 2518;
UL-C (Canada); bS 5867 Part 2, 1980; Gb8624-2006
• Air Porous
• Commercial Fabric
• Linear Vents, Nozzles,
or Orifices
DuraTexTM
Weave:
Fire Retardant Polyester, Plain Weave, Coated
Weight:
5.5 oz/yd2 (186g/m2)
Porosity:
None
ICC/AC167 (Acceptance Criteria of Fabric Air Dispersion Products), and UL 2518;
also available (by request only) to meet bS 5867 Part 2, 1980
• Non-Porous
• Commercial Fabric
• Linear Vents, Nozzles,
or Orifices
Microbe-XTM
Weave:
Weight:
6 & 13: 6.9 oz/yd2 (234g/m2)
29: 6.2 oz/yd2 (210g/m2)
Porosity:
6, 13, 29 CFM/ft2 @ 0.5" w.g. (30.5, 66, 147L/s/m2 @ 125Pa)
Classified by Underwriters Laboratories in accordance with the requirements of NFPA 90A, ICC/
AC167 (Acceptance Criteria of Fabric Air Dispersion Products), and UL 2518
• Air Porous
• Specialty Fabric
• Non-Leaching, Permanent
Antimicrobial
• Linear Vents
Stat-XTM
Weave:
Filament Polyester with Interwoven ESD Yarns
Weight:
2.9 oz/yd2 (98g/m2)
Porosity:
2.5 CFM/ft2 @ 0.5" w.g. (12.7L/s/m2 @ 125Pa)
ICC/AC167 (Acceptance Criteria of Fabric Air Dispersion Products), and UL 2518; UL-C (Canada)
•
•
•
•
RxTM
Fabric:
Weave:
• Air Porous
• Specialty Fabric
• LabSox: D-Fuser or
Traditional Models
• Active Antimicrobial
• Surround Flow or
Select Flow
• Linear Vents
Weave:
•
•
•
•
b
Rx200TM, Rx100TM, Rx50TM, Rx25TM
Fire Retardant Polyester, Filament, Non-Linting
Up to 50% Recycled Content
Weight:
Rx200: 5.4 oz/yd2 (183g/m2)
Rx100: 5.5 oz/yd2 (186g/m2)
Rx50: 6.3 oz/yd2 (214g/m2)
RX25: 7.1 oz/yd2 (241g/m2)
Classified by Underwriters Laboratories in accordance with the requirements of NFPA 90A;
Rx50 and Rx25 are also classified by Underwriters Laboratories in accordance with the
requirements of ICC/AC167 (Acceptance Criteria of Fabric Air Dispersion Products) and UL 2518
Air Porous
Premium Fabric
Active Antimicrobial
Linear Vents, Nozzles,
or Orifices
• Non-Porous
• Premium Fabric
• Linear Vents or Orifices
Air Porous
Static Dissipative
Specialty Fabric
Linear Vents or Nozzles
51f
Smooth-Air
Ph +64 3 343 6184
Ph +64 4 566 7969 Ph +64 9 579 3257
[email protected]
Fax +64 3 343 6004
Fax +64 4 566 3143
Fax +64 9 579 3259
Smooth-
Products Ltd
DuctSox (Cont.)
Inlet Collar with DuctBelt and Anchors
(Standard on Verona, DuraTex,
Microbe-X, Stat-X, and Rx)
Zippered Inlet Collar
Fabric
51g
Also available:
Cover-Up Sleeve Concealing DuctBelt and Anchors
(Standard on Sedona-Xm and TufTex or available as an upgrade)
Standard Fabric Colors
DuctSox offers seven standard colors for Sedona-Xm, TufTex, and Verona. DuraTex is also available in these colors
except green and red. Custom Colors and Patterns are available on some fabrics, but may require a premium charge
and additional lead time.
Black
White
Silver
Green
Red
Tan
Custom Colors
Blue
Patterns
Specialty Fabric Colors
These fabrics are only available in specific color types and patterns.
Microbe-X, White
(Custom colors available)
Stat-X, White
Stat-X, Light Blue
Rx, White
To see true colour
and fabric samples,
please contact us
NOTE: Colors may vary based on texture of fabric or dye lot.
Smooth-Air
Technical Catalogue
6 Stanway Pl, PO Box 12-243, Penrose See also Price Catalogue pp28a-28b
Ph +64 3 343 6184
Ph +64 4 566 7969 Ph +64 9 579 3257
[email protected]
Fax +64 3 343 6004
Fax +64 4 566 3143
Fax +64 9 579 3259
51g
Smooth-
Options
Options
51h
Products Ltd
DuctSox (Cont.)
Adjustable Flow Device
(AFD)
control is critical
in HVAC air dispersion. The zip-in Adjustable Flow Device (AFD)
Adjustable FlowAirflow
Device
(AFD)
offers variable resistance to balance static regain, balance airflow to branches, reduce
turbulence,
and
Airflow control
is reduce
critical abrupt
in HVACstart-ups.
air dispersion. The zip-in Adjustable Flow Device (AFD)
offers variable resistance to balance static regain, balance airflow to branches, reduce
turbulence, and reduce abrupt start-ups.
AFD devices come standard with Sedona-Xm and TufTex Systems.
The AFD is an option with other fabrics.
AFD devices come standard with Sedona-Xm and TufTex Systems.
Except
allwith
AFD’s
arefabrics.
pre-set from the factory
The AFDatisthe
aninlet,
option
other
and should not require field balancing. The inlet
AFD
canatbe
airflow
Except
theadjusted
inlet, allfor
AFD’s
areturbulence.
pre-set from the factory
and should not require field balancing. The inlet
AFD can be adjusted for airflow turbulence.
Inlet
Cinch to use as flow straightener
or
balance airflow. All systems with
Inlet
>1,200
(6.01m/s)
inlet velocity.
Cinch
toFPM
use as
flow straightener
Plenum
Direct airflow into branch take-offs
where
velocity is over 1,200 FPM
Plenum
(6.01m/s).
Direct airflow into branch take-offs
Middle
where velocity is over 1,200 FPM
(6.01m/s).
or balance airflow. All systems with
>1,200 FPM (6.01m/s) inlet velocity.
balances static regain. All systems with an
intermediate zipper over 40' (12,192mm)
Middle
and
>1,200
FPMregain.
(6.01m/s)
inlet velocity.
balances
static
All systems
with an
No Pop
intermediate zipper over 40' (12,192mm)
and >1,200 FPM (6.01m/s) inlet velocity.
Reduces inflation pop. Single AFD located in last
30%
long run, included for all systems over 100'
No ofPop
(30,480mm)
and over
(2,360L/s).
Reduces
inflation
pop. 5,000
Single CFM
AFD located
in last
30% of long run, included for all systems over 100'
(30,480mm)
and overshould
5,000 not
CFMinclude
(2,360L/s).
(Typically, systems
more than two AFDs in sequence to an endcap.)
(Typically, systems should not include more than two AFDs in sequence to an endcap.)
Personalize It!
Personalize It!
Personalize your DuctSox System with a logo, school name, company
name, or slogan. For more information go to www.ductsox.com.
Personalize your DuctSox System with a logo, school name, company
name, or slogan. For more information go to www.ductsox.com.
51h
Smooth-Air
Ph +64 3 343 6184
Ph +64 4 566 7969 Ph +64 9 579 3257
[email protected]
Fax +64 3 343 6004
Fax +64 4 566 3143
Fax +64 9 579 3259
CRITI
Designed specifically for critical environments, LabSox
products combine airflow design with specialized permeable
fabrics and precisely shaped panels.
SmoothProducts Ltd
} Uniform, low velocity, radially diverging air patterns with
APPLI
minimum turbulence
} Can be easily retrofitted to resolve airflow issues
in existing facilities
Chemistry Labs
Microscopy (TEM, SEM, FIb)
} Fabric faced products offer noise levels at least 10 NC
CRITICAL
ENVIRONMENTS
KitchenSox o
preparation
APPLICATIONS INCLUDE
Chemistry Labs
Pharmaceutical
Vivariums
Cleanrooms
Education
Laser Research
Paint Facilities
}
}
}
}
}
KitchenSox offer better air dispersion alternatives for food
preparation environments.
} Airflow through textile eliminates drafts and condensation
} Introduce more supply airflow near hood while
maintaining capture
ceiling tiles
Pharmaceutical
Cleanrooms
Education
Laser Research
Vivariums
Paint Facilities
Chemistry Labs
All-Fabric
} Also availa
ChemSox wa
such as met
manufacturin
industries.
} Recyclabl
fabric to c
} Up to 50%
typical du
minimum turbulence
} Can be easily retrofitted to resolve airflow issues
quieter than metal
} Fabric faced products offer noise levels at least 10 NC
} Highly permeable, antimicrobial treated fabrics
} Modular D-Fuser available in MetalPan or All-Fabric models
} Also available in Round, D-Shape, or quarter-Round
Cleanrooms
Laser Research
Pharmaceutical
Education
Paint Facilities
Vivariums
secondary filtration
} Fabric face can be easily removed for laundering
} Modular D-Fuser available in MetalPan or
All-Fabric models
Chemistry Labs
ceiling tile
secondary
} Antimicrobial treated, highly porous textile offers
maintainin
} Reduces d
} Fabric fac
} Modular D
} Reduces dirt deposits on diffuser and adjacent
} Airflow thr
} Introduce
} Antimicrob
minimum turbulence
Can be easily retrofitted to resolve airflow issues
Fabric faced products offer noise levels at least 10 NC
quieter than metal
Highly permeable, antimicrobial treated fabrics
Modular D-Fuser available in MetalPan or All-Fabric models
Also available in Round, D-Shape, or quarter-Round
INNOVATION
Vivariums
quieter than metal
51i
} Highly permeable, antimicrobial treated fabrics
} Modular D-Fuser available in MetalPan or All-Fabric models
UnderFloorSox (UFSox) are a specialty line of DuctSox products designed to
distribute and disperse air within the plenum for Underfloor Air Distribution
(UFAD) Systems.
} UFSox easily fit into standard raised access floor systems.
• Lightweight, easy to ship, handle, and install
• Modular, zip-together sections and fittings
• Easily reconfigured for future changes
• Placed on the floor, secured with retention cables
} Air dispersion through engineered venting and variable endcaps improve
DuctSox (Cont.)
CRITICAL ENVIRO
quieter tha
} Highly per
} Modular D
} Also availa
maintaining capture
} Reduces dirt deposits on diffuser and adjacent
}
}
}
}
ceiling tiles
Antimicrobial treated, highly porous textile offers
secondary filtration
Fabric face can be easily removed for laundering
Modular D-Fuser available in MetalPan or
All-Fabric models
Also available in Round, D-Shape, or quarter-Round
ChemSox was developed for chemically harsh environments
such as metal plating, chemical processing, battery
manufacturing, and other highly corrosive and caustic
industries.
} Recyclable and inert, high density polyethylene (HDPE)
fabric to combat brittleness/cracking
} Up to 50% less expensive (materials/installation) than
typical ductwork used (metal, aluminum, or stainless)
ChemSox was developed for chemically harsh environments
such as metal plating, chemical processing, battery
manufacturing, and other highly corrosive and caustic
industries.
} Recyclable and inert, high density polyethylene (HDPE)
fabric to combat brittleness/cracking
} Up to 50% less expensive (materials/installation) than
typical ductwork
used are
(metal,
aluminum,
stainless)
UnderFloorSox
(UFSox)
a specialty
line oforDuctSox
products designed to
distribute and disperse air within the plenum for Underfloor Air Distribution
(UFAD) Systems.
} UFSox easily fit into standard raised access floor systems.
• Lightweight, easy to ship, handle, and install
• Modular, zip-together sections and fittings
• Easily reconfigured for future changes
• Placed on the floor, secured with retention cables
} Air dispersion through engineered venting and variable endcaps improve
thermal distribution of supply air within the plenum.
• Deliver cool air to perimeter zones reducing effects of thermal decay
• Low noise. Venting in fabric reduces noise generation within the plenum
• Uniform dispersion ensures balanced pressurization of the plenum
• Air porous fabrics eliminate ductwork condensation and reduce
temperature gain over extended distances to perimeter zones
Smooth-Air
Technical Catalogue
6 Stanway Pl, PO Box 12-243, Penrose www.smooth-air.co.nz
Ph +64 3 343 6184
Ph +64 4 566 7969 Ph +64 9 579 3257
[email protected]
Fax +64 3 343 6004
Fax +64 4 566 3143
Fax +64 9 579 3259
51i
Smooth-
DuctSox (Cont.)
SUSPENSION/RETENTION
51j
wrinkling
or Cable
y
n
Products Ltd
Suspension/Fabric Retention Systems
Suspension/Fabric Hanger
Retention Systems
SkeleCore
3x1 i
FTS
” )
Track or Cable Fabric Tensioning36System
m
4m
1
9
8" - 48" diameter
(
8" - 60" diameter
4x2
1, 2, or 3 Row
SkeleCore
IHS
1 Row
” m)
Track or Cable
n
Hoop System
36Internal
m
8" - 30" diameter
14
9
(
Track
or
Cable
i
f - 1,219mm)
FTS
IHS
(203mm
(1,270mm - 1,524mm)
(203mm - 762mm)
(203mm - 1,524mm)
8" - 60" Hoop
diameter
n
Internal
System
l Fabric Tensioning System
(203mm - 1,524mm)
- 60" diameter
Track or Cable
f
a 8"
2 Row
8" - 60" diameter
Up to 60" (1,524mm ) dia.
l
t (203mm - 1,524mm)
(203mm - 1,524mm)
a
e
t
e
m
o
m
d
1 Row Track or Cable Internal framework system
2 Row Track or Cable
3 Row
o
Fabric attached to 1 Row Track or Cable
e
at 12 o’clock
at 11 & 1 o’clock at 12 o’clock every 12" (305mm)
60" (1,524mm ) or larger dia.
Vertical drops every 6' (1,829mm)
d
Internal framework system
e
Fabricd
connection points
connection
(1,829mm)points
Vertical drops Fabric
every 6'
at 12 o’clock every 12" (305mm)
Fabric supported radially
no
CHange
in
Form
at 10, 12 & 2 o’clock
at 10, 11, 1 & 2 o’clock
with internal rings
e
(1,524mm)
every 5'
d
Fabric
supported
radially
f no CHange in Form
with
internal
rings
e
l
every 5' (1,524mm)
Tensioned at
f
a
10 & 2 o’clock
l
t
a
e
t
e
m
o
100% of fabric is in tension
m
d
Fabric
tensioned
at at
Tensioned at
Fabric tensioned at
full
circumference and length
Fabric
tensioned
at
Fabric
tensioned
o
e
1212
o’clock
to Track
or Cable
10, 12 & 2 o’clock
11 & 1 o’clock to Track or Cable
Maximum
section
is 42'is(12,802mm)
12 o’clock
to Tracktensioned
or Cable100%
of
fabric
in
tension
o’clock
to
Track
or
Cable
d
full circumference and length
Fabric tensioned at
e
Maximum tensioned section is 42' (12,802mm)
C 4 hours
Track or Cable
50" - 60" diameter
o’clock
toinstallation
Track
or Cable
Easyand
& maintenance
No sagging
/ No wrinkles
Minimal fabric12sagging
wrinkling
Reduced
deflation
Lowest
initial cost T
8 hours
Longest
product
life
Easy
installation
with
Track
or
Cable
Simple installation with Track or Cable
Higher
design
velocities
expectancy
87% Less
External hanger
supports
easily
detached for maintenance
No
sagging
/ No
wrinkles
MinimalLonger
fabric life
sagging
and
wrinkling
38 hours
1 Row
2 Row
M 3 Row
Ideal
for VAV
applications
VAV applications
5 hours
CABLE
Longest
product
life
Easy installation
with Track or Cable
67% Less
hourslife expectancy
Higher design velocities
Longer
FABRIC 12.5
100%
45%
17%
17% DeflationIdeal for
TRACK 9 hours12% Deflation
8 hours
applications
VAV
applications
0%VAV
Deflation
1-5%
Deflation
C Deflation
Deflation
4
38hours
hours
C Deflation
METAL
67% Less
12.5 hours
38 hours
Start-up Minor inflation noiseNo inflation noiseMETAL
16 hours
Minor inflation noiseFABRIC
No
inflation
noise TNoticeable
8 hours
Disruptive
noise
noise T Minor noise
0%
Deflation
1-5%
Deflation
Noticeable fabric motion
38
hours
&
fabric
motion
&
fabric
motion
&
fabric
motion
No fabric motion
Minimal
fabric
motion
METAL
38 hours
38 hours M
Start-up
No inflation noise
No inflation noise M
87% Less
76% Less
No fabric motion
Minimal89.5%
fabricLess
motion
5 hours
CABLE
CABLE 10.6 hours
8 hours
12 hours
C 4 hours
C
C
4 hours
CABLE
67% Less
12.5 hours
FABRIC
Install
21.6 hours
Less
8 hours
TRACK 9 hours
TRACK
16 hours T
24 hours
T 89.5%
T
time*
TRACK 8 hours
4 hours
CABLE
38 hours
METAL
38 hours 67%
44 hours
38 hours M
Less
38 hours M
44 hours
METAL
METAL
M
FABRIC 12.5 hours
Install
38 hours
METAL
time*
TRACK 8 hours
38 hours
METAL
8 hours
38 hours
C
METAL
CUp to12
Up to 15 years
Up to 15 years
10hours
years
76% Less Up to 20 years
Up to 1516
years
Warranty**
hours
T
89.5% Less
10.6
hours
24
hours
CABLE
T
4 hours
CABLE
38
hours
M
Up
to
20
years
Up
to
15
years
Warranty**
44 hours
21.6 hours
M
TRACK
89.5% Less
8 hours
TRACK
* InstallationCABLE
time (hours4ofhours
labor)
based
on
a
single
length
of
100'
(30,480mm)
of
24"
(610mm)
diameter
DuctSox
compared
to an
44 hours
METAL
uninsulated
spiral
metal
duct
and
diffusers.
4x2
and
3
Row
systems
evaluated
with
50"
(1270mm)
diameter.
38
hours
12
hours
METAL
C
TRACK 8 hours
For more information
on installation, please review the DuctSox installation estimator at www.ductsox.com.
** Warranty varies based on fabric selection, suspension/retention, and design criteria.
METAL
8
38 hours
T
24 hours
M
44 hours
8
51j
Smooth-Air
Ph +64 3 343 6184
Ph +64 4 566 7969 Ph +64 9 579 3257
[email protected]
Fax +64 3 343 6004
Fax +64 4 566 3143
Fax +64 9 579 3259
Smooth-
Products Ltd
DuctSox (Cont.)
51k
Suspension/Fabric
Retention
Systems
Suspension/Fabric
Retention
Systems
SkeleCore
Hanger
SkeleCore
i
FTS
” )
Tensioning
Track
orn
Cable Fabric
Fabric
Tensioning
System
36mmSystem
4
8" - 60" diameter
8"8"- 48"
diameter
- 60"f
diameter
(91
(203mm - 1,524mm)
(203mm
(203mm
- 1,524mm)
l- 1,219mm)
a
t
e
i
n
f
l
a
t
e
3x1
FTS
m
o
d
e
m
o
d
e
Fabric
connectionno
points
no CHange
inCHange
Form
at 10, 12 & 2 o’clock
m
o
d
e
m
o
d
e
IHS
IHS
in Form
1 Row
Internal
Hoop System Track or Cable
Track or Cable Internal Hoop6 ”System
m)
3 4mTrack
or Cable
50" - 60" diameter
8" - 30" diameter
Track or Cable
1
9
(
8" - 60" diameter
(1,270mm - 1,524mm)
(203mm - 762mm)
8" - 60" diameter
(203mm - 1,524mm)
(203mm - 1,524mm)
2 Row
Up to 60" (1,524mm ) dia.
Internal
framework system
1 Row Track
or Cable
Internal
framework
system
Vertical
drops every 6' (1,829mm)
at drops
12 o’clock
Vertical
every
6' (1,829mm)
d
e
f
l
a
t
e
d
e
f
l
a
t
e
4x2
1, 2, or 3 Row
Fabric
attached
toCable
2 Row
Track
or Cable
Fabric
attached
to 1 Row
Track or
3 Row
at 12
o’clock
every 12" (305mm)
at 11 &at
1 12
o’clock
(305mm)
o’clock every
12"
Fabric
supported radially
Fabric connection
points
Fabric
supported
radially
with internal rings
at 10, 11, 1 & 2with
o’clock
internal rings
every 5' (1,524mm)
every 5' (1,524mm)
Tensioned at
10 & 2 o’clock
100%
of fabric is in tension
100% of fabric is
in tension
fulland
circumference
and length
full
circumference
length
at
FabricFabric
tensioned
at
Tensioned at
Fabric tensioned at Fabric tensioned
at tensioned
Fabric
tensioned
at
Maximum
tensioned
section is 42' (12,802mm)
(12,802mm)
Maximum
tensioned
section
is
42'
12
o’clock
to
Track
or
Cable
12
o’clock
to
Track
or
Cable
10, 12 & 2 o’clock
11
&
1
o’clock
to
Track
or
Cable
12
o’clock
to
Track
or
Cable
12 o’clock to Track or Cable
Nowrinkles
sagging / No wrinkles
sagging
and wrinkling
C 4 hours
Easy installation
& maintenance
No sagging / No
Minimal fabricMinimal
saggingfabric
and wrinkling
Reduced deflation
Longest
Easy
installation
with Track
or Cable
Lowest
initial cost T
Longest product
life product life
Easy installation
with
Track or Cable
8 hours
Simple installation
with Track or Cable
design velocities
Longer life expectancy
Higher design Higher
velocities
87%
Less
External hanger
supports
easily
detached
for
maintenance
Ideal for VAV applications
VAV1applications
38 hours
Row
2 Row
Ideal for VAV applications
VAV applications
M 3 Row
5 hours
CABLE
67% Less
12.567%
hours
Less
FABRIC
12.5
hours
FABRIC
100%
45%
17%
Deflation
17% Deflation
0% Deflation 0% DeflationTRACK 9 hours12% Deflation
1-5% Deflation1-5%
8 hours
38 hours C Deflation
METAL
38 hours C Deflation
Deflation
4 hours
METAL
38 hours
Start-up Start-up Minor inflation
METAL
No inflation noise
No inflation noise
16 hours
noise noise
No inflation
Minor inflation noise No inflation noise
8 hours
Disruptive
noise
noise T Minor noise
TNoticeable
No fabric motion
fabric
motion
Noticeable No
fabric
motion
fabric
motion
Minimal fabricMinimal
motion
& fabric motion & fabric motion & fabric38
motion
hours
ng
e
M
87% Less
5 hours
Install
hours
FABRIC 12.5FABRIC
time*9 hours
TRACK
CABLE
Install
time*
METAL
METAL
METAL
Warranty** Warranty**
12.567%
hours
Less
67% Less
TRACK
38 hours
38 hours
METAL
89.5% Less
4 hours
CABLE
4 hours
38 hours
CABLE
21.6TRACK
hours 8 hoursTRACK 8 hours
T
METAL
Up to 15 years
8
44 hours
METAL
M
C
8 hours
8 hours
T
16 hours
38
38hours
hoursM
3838hours
hours
C
12 hours
T
24 hours
M
44 hours
8 hours
10hours
years
Up to 15 yearsUp to 15 years CUp to12
T
16 hours
M
38 hours
M
44 hours
T
24 hours
44 hours
M
* Installation time (hours of labor)
based
on
a
single
length
of
100'
(30,480mm)
of
24"
(610mm)
diameter
DuctSox
compared
to an
44 hours
hours
METAL METAL
METAL
38 hours4x2 and38
uninsulated spiral
metal duct and diffusers.
3 Row systems evaluated with 50" (1270mm) diameter.
12 hours
C
For more information on installation, please review the DuctSox installation estimator at www.ductsox.com.
24 hours
** Warranty varies based on fabric selection, suspension/retention, and design criteria.
T
hours
TRACK TRACK 821.6
hoursTRACK 8 hours
8
M
76% Less
CABLE 10.6 hours
20 years
Up to 15
Upyears
to
20Less
yearsUp to89.5%
76%
Less
10.6 hours
CABLE CABLE
89.5% Less
89.5% Less
4 hours
CABLE
4 hours
C 4 hours
C
38 hours
Smooth-Air
Technical Catalogue
6 Stanway Pl, PO Box 12-243, Penrose www.smooth-air.co.nz
Ph +64 3 343 6184
Ph +64 4 566 7969 Ph +64 9 579 3257
[email protected]
Fax +64 3 343 6004
Fax +64 4 566 3143
Fax +64 9 579 3259
51k
Smooth-
DuctSox (Cont.)
Suspension/Fabric
Suspension/Fabric Retention
Retention Systems
Systems
51l
& maintenance
ial cost
wng
ble
on
noise
motion
years
Products Ltd
SkeleCore
Surface Mount
Suspension Hardware
SkeleCore
Suspension/Fabric Retention Systems
ii D-Shape
Hanger
1, 2, or 3 Row
TrackIHS
FTS
FTS
IHS
Adjustable Track
nn Fabric
Internal
FabricTensioning
TensioningSystem
System
InternalHoop
HoopSystem
System
Support
8"8"- 60"
Track ororCable
SkeleCore
- 60"diameter
diameter
Cable
U-Track 8"Track
3x1 ff
4x2
1 Row
(203mm - 1,524mm)
60"
diameter
”
Suspended
”8"m)- 60"- diameter
Trackl
or
Track or Cable
Track or Cable
lCable (203mm - 1,524mm)
36mm)
1,524mm)
36(203mm
4
- 1,524mm)
m
4(203mm
aaidiameterFTS
8" - 48"
50" - 60" diameter
8" - 30" diameter
1
(91
m)
9
(
IHS
m
'
(203mm
(1,270mm - 1,524mm)
- 82,438 System (203mm - 762mm)
ttn- 1,219mm)
Fabric Tensioning System
Internal
5' -Hoop
m Cable
eef
mor
8" - 60" diameter
Track
24
2 Row
(203mm - 1,524mm)
8",5 - 60" diameter
(1
l
Up to 60" (1,524mm ) dia.
(203mm - 1,524mm)
mma
oot
dde
2 Row
Internal
C-Track
framework
at
system
Fabric
ee
Internal
framework
system
Fabricattached
attachedtoto11Row
RowTrack
TrackororCable
Cable
Vertical
3 drops
&drops
9 o’clock
every
atat12
(1,829mm)
(305mm)
Vertical
every6'6'(1,829mm)
12o’clock
o’clockevery
every12"
12"(305mm)
m
o
3 Row
ddd quarter-Round
Fabric
at 12
o’clock
at 11supported
&supported
1 o’clockradially
no
CHange
in
Form
Fabric
radially
no
CHange
in
Form
Glider
with
internal
rings
eee
with internal rings
Internal framework system
every
(1,524mm)
every5'5'(1,524mm)
Vertical drops
every
6' (1,829mm)
at 12 o’clock every 12" (305mm)
Fabricf
connection points
Fabric
connection
points
f
at 10,l
12
at 10, 11, 1 & 2 o’clock
l & 2 o’clock
aad
Fabric
supported radially
no CHange in Form
U-Track, Surface
Mount
C-Track, Surface Mount
tte
with internal rings
(1,524mm)
every
5'
eef
Tensioned at
l
10 & 2 o’clock
mma
oot
100%
dde
100%ofoffabric
fabricisisinintension
tension
Fabric
2full
Row
C-Track at and
Spring
fullcircumference
circumference
andlength
length
ee
Fabrictensioned
tensionedatat
Maximum
tensioned
section
is
42'
(12,802mm)
12
o’clock
totoTrack
ororCable
3 &section
6 o’clock
Clip
Maximum tensioned
is 42' (12,802mm)
12
o’clock
Track
Cable
m
Fabric tensioned at
Tensioned at
Fabric tensioned at
Fabric tensioned at
o
sagging
//No
wrinkles
12 sagging
o’clock
toand
Track
or
Cable
10, 12 & 2 o’clock
11 & 1 o’clock to Track Minimal
orMinimal
Cable fabric
100%
of fabric is in tension
12 o’clock toNo
Track
or Cable
d
No
sagging
No
wrinkles
fabric
sagging
andwrinkling
wrinkling
withproduct
finished
Longest
life
Easy
Cable
full circumference
and length
Fabricoror
tensioned
Longest
product
life
Easyinstallation
installationwith
withTrack
Track
Cable at
Tension Cable
e ceilingsFororapplications
Maximum
tensioned
section is 42' (12,802mm)
specialty
Higher
airflow
design
requirements
velocities
to Track or Cable
Higher design velocities
Longer 12
lifeo’clock
expectancy
C 4 hours
Easy
installation
& maintenance
Ideal
VAV
VAV
deflation
Idealfor
forReduced
VAVapplications
applications
VAVapplications
applicationsLowest initial cost
8 hours
67% Less
T
Simple installation with Track or Cable
12.5) hours
FABRIC
67% Less
hours
m fabric
FABRIC
' m12.5
0
NoDeflation
sagging
/
No
wrinkles
Minimal
sagging
and
wrinkling
17%
87%
Less
External hanger
supports
easily
detached
for
maintenance
1-5%
0%
1-5%
38 hours
' - 3 ,144 installation
1Deflation
Row
2Cable
Row
0%Deflation
Deflation
1-5%
Deflation
M 3 Row
hours
Deflation
Longest
productCABLE
life
with Track or38
25 - 9Easy
5 hours
METAL
38 hours
METAL
m
m
Start-up
Higher
designnoise
velocities
Longer
life expectancy
0
Start-up
No
No
inflation
noise
Minimum
noise
,62
100%
45%
17%
Noinflation
inflation
noise
No
inflation
noise
Minor noise
for
VAVmotion
applications
VAV
applications
17% Deflation Ideal
TRACK 9 hours12% Deflation(7
8 hours
No
fabric
Minimal
fabric
motion
&
fabric
motion
C Deflation
Deflation
Deflation
& fabric motion
4
hours
No fabric motion
Minimal
fabric
motion
C
67% Less
FABRIC
38 hours12.5 hours
METAL
16 hours
Minor inflation noise
Minor inflation noise
0% Deflation
1-5% Deflation
8 hours
Disruptive
noise TNoticeable
noise T Minor noise
38 hours
89.5%
Less
Noticeable fabric motionMETAL
& fabric
motion
motion
89.5%
Less & fabric motion & fabric38
hours
Start-up
4 hours
38 hours M
CABLE
M
No inflation noise
No inflation noise
4 hours
CABLE
67%
Less
10
hours
12.5
hours
FABRIC
FABRIC
Install
67% Less
hours
fabric motion
Minimal fabric motion
FABRIC
Install
87% Less 12.5 No
76% Less
8 hours
time*
TRACK
8 hours
time*
TRACK
38
hours
5
hours
10.6
hours
38
hours
METAL
CABLE
CABLE 38 hours
METAL
8 hours
12 hours
C 4 hours
C
C
METAL
38 hours
METAL
38 hours
89.5%
Less
METAL
9
hours
21.6
hours
8
hours
TRACK
TRACK
16 hours T
24 hours
T
T
4 hours
CABLE
67% Less
12.5
hours
38
hours
44
hours
FABRIC
38
hours
Glider
Install
38
hours
44
hours
METAL
METAL
M
M
M
time*
TRACK 8 hours
Up
to
10
Up
years
to
20
years
Up
to
15
years
Warranty**
Up
to
20
years
Up
to
15
years
Warranty**
38 hours
89.5% Less
METAL
89.5% Less
38 hours
4 hours
METAL
8 hours
CABLE
C
4
hours
CABLE
CUp to12
Up to 15
years
Up to 15 years
10hours
years
76% Less
8 hours
16 hours
TRACK
T
8
hours
TRACK
24 hours
CABLE 10.6 hours
T
Up to 20 years
years
Warranty**
38 hours
38 hours
MUp to 15
METAL
38 hours
44 hours
89.5% Less
21.6
hours
METAL
M
TRACK
hoursbased on a single length of 100' (30,480mm) of 24" (610mm) diameter DuctSox compared to an
CABLE
* Installation time
(hours of4labor)
44 hours
METAL
uninsulated spiral metal
duct and diffusers. 4x2 and 3 Row systems evaluated with 50" (1270mm) diameter.
10
12 hours
8
C
TRACK 8onhours
8
For more information
installation, please review the DuctSox installation estimator at www.ductsox.com.
3 Row
** Warranty varies
based on fabric selection, suspension/retention,
and design criteria.
38 hours
METAL
8
51l
Smooth-Air
T
M
Ph +64 3 343 6184
Ph +64 4 566 7969 Ph +64 9 579 3257
24 hours
44 hours
[email protected]
Fax +64 3 343 6004
Fax +64 4 566 3143
Fax +64 9 579 3259
Smooth-
ELIMINATE
MOTION
DuctSox
(Cont.)
ELIMINATE SAGGING
ELIMINATE WRINKLES
53
SkeleCore FTS
SkeleCore FTS stands alone as the only textile duct/diffuser system that provides cylindrical tensioning to keep the fabric round and taut
INNOVATION
at all times. It maintains
the same appearance with or without
any air pressure in the duct
and improves aesthetics by eliminating
fabric
ELIMINATE NOISE
ELIMINATE
MOTION
ELIMINATE
SAGGING
ELIMINATE
WRINKLES
sag and wrinkling. SkeleCore FTS is ideal when higher aesthetic value is desired, when cycling is frequent, or when systems are designed
with
variable air volume (VAV).MOTION
It eliminates
disruptive tendencies such
as motion and noise upon SAGGING
AHU start-up,ELIMINATE
especially in hard start ELIMINATE
ELIMINATEELIMINATE
NOISE
ELIMINATEELIMINATE
MOTION
ELIMINATE
SAGGING
WRINKLES
NOISE
ELIMINATE
WRINKLES
applications. SkeleCore FTS also features a unique metal-to-metal Direct Hang Cable method which is the SAFEST suspension in textile
SKELECORE
SKELECORE
Taking Shape
TE NOISE
Products Ltd
SkeleCore FTS
ducting. Fabric longevity is extended by minimizing system movement.
ELIMINATE
NOISE
ELIMINATE
ELIMINATE
SAGGING
ELIMINATE
WRINKLES
ELIMINATE
NOISE
ELIMINATE
MOTION MOTION
ELIMINATE
SAGGING
ELIMINATE
SkeleCore
FTS stands alone as the only textile
duct/diffuser system thatWRINKLES
provides cylindrical tensioning to keep the fabric round an
SkeleCore
FTS
at all times. It maintains the same appearance with or without any air pressure in the duct and improves aesthetics by eliminating f
sag and
wrinkling.
SkeleCore
FTS is ideal when
higher
value is desired,
whentocycling
is frequent,
or when
systems are des
SkeleCore FTS stands
alone
as the only
textile duct/diffuser
system
thataesthetic
provides cylindrical
tensioning
keep the
fabric round
and taut
Direct Hang Cable:
Standard 5' (1,524mm)
with variable
air volume
(VAV).with
It eliminates
tendencies
such
asand
motion
and noise
upon AHU
start-up, especially
in hard s
at all times. It maintains
the same
appearance
or withoutdisruptive
any air pressure
in the
duct
improves
aesthetics
by eliminating
fabric
galvanized wire drops
SkeleCore
FTS also
features
a unique
Direct
Hang
method
which
is the SAFEST
suspension in te
sag and wrinkling.applications.
SkeleCore FTS
is ideal when
higher
aesthetic
valuemetal-to-metal
is desired, when
cycling
is Cable
frequent,
or when
systems
are designed
spaced every 6' (1,829mm)
ducting.
Fabric
longevity
extended tendencies
bysystem
minimizing
system
movement.
with variable
air volume
(VAV).
eliminates
disruptive
such
as motion
and noise
upon AHU
start-up,
especially
hardtaut
start
SkeleCore
FTS stands
alone as
theItonly
textile is
duct/diffuser
that
provides
cylindrical
tensioning
to keep
the fabric
roundinand
SkeleCore is the next generation of Textile Air Dispersion Systems! SkeleCore utilizeswith
an Gripple
InternalTMFramework
System to provide
Hanger
SkeleCore
also
features awith
unique
metal-to-metal
Direct Hang
Cable
which isaesthetics
the SAFEST
suspension fabric
in textile
times. It maintains
the FTS
same
appearance
or without
any air pressure
in the
ductmethod
and improves
by eliminating
System formodels
easy vertical
aesthetic enhancement and improved performance characteristics. There are two SkeleCore
to choose from, SkeleCore FTSat allapplications.
ducting.
FabricSkeleCore
longevity isFTS
extended
minimizing
system movement.
sag and
wrinkling.
is ideal by
when
higher aesthetic
value is desired, when cycling is frequent, or when systems are designed
adjustment.
Cable
(Fabric Tensioning System) and SkeleCore IHS (Internal Hoop System). both are available
from 8"
- 60"drop
(203mm - 1,524mm) diameters.
SkeleCore is the next generation of Textile Air Dispersion Systems! SkeleCore utilizes an Internal Framework
System to provide
come with clips
with variable air volume
(VAV).Cable:
It eliminates disruptive tendencies such as motion and noise upon AHU start-up, especially in hard start
Direct Hang
SkeleCore is the next generation of Textile Air Dispersion Systems! SkeleCore utilizes an Internal Framework Systemends
to provide
aesthetic enhancement and improved performance characteristics. There are two SkeleCore
to choose from, SkeleCore FTS
formodels
easy install.
Standard
(1,524mm)
applications. SkeleCore
FTS5'at
also
Direct
Hang Cable
aesthetic enhancement and improved performance characteristics. There are two SkeleCore models to choose from,
SkeleCore
FTS
Closed
zipper
12 features
o’clock. a unique metal-to-metal
Cable drop
attachment
point.method which is the SAFEST suspension in textile
(Fabric Tensioning System) and SkeleCore IHS (Internal Hoop System). both are available from 8" - 60" (203mm - 1,524mm) diameters.
galvanized
wire drops
ducting.
Fabric
longevity
is extended
by minimizing system movement.
(Fabric Tensioning System) and SkeleCore IHS (Internal Hoop System). both are available from 8" - 60" (203mm - 1,524mm) diameters.
Direct Hang
Cable:
Turning adjustment on CTR
TM
12" (305mm)
Zipper
Access:
Direct Hang
Hanger
with
Gripple
clockwise extends Spacer Tubing
galvanized
wire drops
Cable
penetrates
fabric
zipper
System
forthrough
easy vertical
drawing fabric round and taut.
spaced
every
6' (1,829mm)
Direct
Hang
Cable:
attaching
rings (CTRs
IRs). Opening
adjustment.
Cable or
drop
TM to internal
Hanger
with Gripple
Standard
5'
(1,524mm)
is closed
with
dual-pull
locking
zippers.
ends
come
with clips
System
for
easy
vertical
galvanized wire drops for easy install.
adjustment.
Cable
drop
Closed zipper at 12 o’clock.
Cable drop attachment point.
come
with clips
TM
Hanger
with ends
Gripple
Sewn-in clips anchor
for easy
install.
System
for easy
vertical
Closed zipper
at 12 o’clock.
fabric to CTRs.
12" (305mm)
Zipper Access: Direct Hang
adjustment. Cable drop
Cable penetrates fabric through zipper
ends come with clips
attaching
toDirect
internal
rings (CTRs or IRs). Opening
(305mm) Zipper
Access:
fabric to CTRs.
for easyalone
install.as the only textile duct/diffuser system that12"
SkeleCore FTS stands
provides
cylindrical
tensioning
to Hang
keeplocking
the fabric
rounddrop
andattachment
taut
fabric to CTRs.
isatclosed
withzipper
dual-pull
zippers.
zipper
12
o’clock.
Cable
point.
CableClosed
penetrates
fabric
through
at all times. It maintains the same appearance with or without any air pressure in the duct and improves aesthetics by eliminating fabric
attaching to internal rings (CTRs or IRs). Opening
sagsupport
and wrinkling. SkeleCore FTS is ideal when higher aesthetic value is desired, when cycling is frequent, or when systems are designed
Intermediate
Rings
(IR):
Provides
Adjustment points at all CTRs.
is
closed with
dual-pull
locking
zippers.
12"
(305mm)
Zipper
Access:
Direct
Hang
with
variable
air
volume
(VAV).
It
eliminates
disruptive
tendencies
such
as
motion
and
noise
upon
AHU
start-up,
especially
in
hard
start
for fabric every 6' (1,829mm), attachment
Cable Hang
penetrates
through
zipper
applications.
Cablefabric
method
which
is the SAFEST suspension in textile
points for Direct Hang Cable and
connecting SkeleCore FTS also features a unique metal-to-metal Direct
Intermediate Rings
(IR): Tubing.
Provides support
for Spacer
Intermediate Rings (IR): Provideshubs
support
is closed with dual-pull locking zippers.
points for Direct Hang Cable and connecting
points for Direct Hang Cable and connecting
hubs for Spacer Tubing.
hubs for Spacer Tubing.
Direct Hang Cable:
SkeleCore FTS
ELIMINATE NOISE
ELIMINATE MOTION
ELIMINATE SAGGING
ELIMINATE WRINKLES
SkeleCore FTS
Spacer Tubing: 6' (1,829mm)
long standard aluminum.
with GrippleTM Hanger
System for easy vertical
for easy install.
Patent Pending
Track (or Tension Cable) Suspension
Patent Pending
12" (305mm) Zipper Access: Direct Hang
Spaced
(305mm)
CableGliders:
penetrates
fabric12"
through
zipper
SkeleCore IHS
Patent Pending
SkeleCore IHS (Internal Hoop System)
utilizes Internal Hoops to help maintain
fabric shape and retention consistent
with industry practices. SkeleCore
IHS improves start-up performance
and aesthetics when compared to
half round and multiple-point
suspension
systems.
Internal framework
produces
minimal
What’s Important?
SkeleCore IHS
Cylindrical Tensioning Rings (CTR): Provides
pressure loss as determined by an
easy adjustment (up to 5" or 127mm of
independent third-party testing laboratory.
fabric take-up per tensioned section),
Internal framework produces minimal
Internal framework produces minimal
Cylindrical
Tensioning
Ringsfor(CTR):
Provides
attachment
points
textile
duct
and
Direct
pressure
loss as determined by an
Cylindrical Tensioning Rings (CTR): Provides
pressure loss as determined by an
easy adjustment
(up
to
5"
or
127mm
of
HangofCable, and connecting hubs for Spacer
independent third-party testing laboratory.
easy adjustment (up to 5" or 127mm
fabric take-up
tensionedsections
section),can be as long independent third-party testing laboratory.
Tubing.per
(Tensioned
fabric take-up per tensioned section),
attachment42'
points
for textile duct and Direct
or 12,802mm.)
attachment points for textile ductas
and Direct
Hang Cable, and connecting hubs for Spacer
Hang Cable, and connecting hubs for Spacer
Tubing. (Tensioned sections can be as long
Tubing. (Tensioned sections can be as long
as 42' or 12,802mm.)
as 42' or 12,802mm.)
ON
Where SAGGING
Form MeetsELIMINATE
Function
ELIMINATE
WRINKLES
Patent Pending
apart
Track
attaching
toalong
internal
rings (CTRs or IRs). Opening
or Cable.
is closed
with dual-pull locking zippers.
Track (or Tension
Cable)
Suspension
Spaced
12" (305mm)
Gliders:
apart along Track
or(305mm)
Cable.
Gliders: Spaced 12"
Internal Hoops: Support apart
the
fabric
Track
(or Tension
along
Track Cable) Suspension
from the inside, spaced every
5'
or Cable.
SkeleCore IHS (Internal Hoop System)
(1,524mm), and areGliders:
removable.
SkeleCore
IHS
•What
is the appearance
start-up
Spaced 12" (305mm)
utilizes Internal Hoopsat
to help
maintain
apart along Track
fabric Hoop
shapeSystem)
and retention consistent
IHS (Internal
andSkeleCore
inflate/deflate
modes?
or Cable.
with industry
practices. SkeleCore
utilizes Internal Hoops
to help maintain
SkeleCore
IHSIHS
improves
start-up performance
fabric shape and retention
consistent
and
aesthetics
compared to
•How
will
the
airwhen
dispersion
withvisible
industry
practices.
SkeleCore
SkeleCore
IHS (Internal
Hoop
System)
Internal Hoops: Support the fa
half
round
and multiple-point
IHSInternal
improves
start-up
performance
from the inside, spaced every 5
utilizes
Hoops
to help
maintain
system
be
inwhen
the
space?
suspension
systems.
and
aesthetics
compared
to
(1,524mm),
and are removable
fabric
shape
and retention
consistent
Internal Hoops: Support
the fabric
roundpractices.
and multiple-point
with half
industry
SkeleCore
Patent Pending
suspension
systems.
IHS improves
start-up
performance
•Will
the AHU
(fan) cycle during
For many years, Textile Air Dispersion Systems excelled at providing
times
half roundof
anduse?
multiple-point
SkeleCore
FTSfeatures and benefits, but fell short in terms of
suspension systems.
superior
“Function”
SkeleCore FTS stands alone as the only textile duct/diffuser system that provides cylindrical tensioning to keep the fabric round
and
tautfabric wrinkles, bunching, and
•
Are
“Form.”
SkeleCore FTS changes that, providing the ultimate in both
at all times. It maintains the same appearance with or without any air pressure in the duct and improves aesthetics by eliminating fabric
sagging visible in the deflate mode?
sag and wrinkling.
Function
andSkeleCore
Form.FTS is ideal when higher aesthetic value is desired, when cycling is frequent, or when systems are designed
with variable air volume (VAV). It eliminates disruptive tendencies such as motion and noise upon AHU start-up, especially in hard start
applications. SkeleCore FTS also features a unique metal-to-metal Direct Hang Cable method which is the SAFEST suspension in textile
from the inside, spaced every 5'
(1,524mm), and are removable.
Internal Hoops: Support the fabric
Gliders: Spaced 12" (305mm)
apart along
•Will the supply airflow be controlled
by Track
or Cable.
With DuctSox, there are a variety of Suspension/Fabric Retention SkeleCore
IHS air volume (VAV) equipment?
variable
Systems to choose from. You decide what’s important: Function, SkeleCore IHS (Internal Hoop System)
Direct Hang Cable:
temporary-use application?
utilizes Internal•Is
Hoopsthis
to helpa
maintain
Form,5' (1,524mm)
or both.
Standard
with GrippleTM Hanger
System for easy vertical
for easy install.
Shape
•Is fabric noise and movement
during start-up tolerable?
IHS improves start-up performance
suspension systems.
Selecting the Shape of a DuctSox
System
based
on your application
12" (305mm)
Zipper is
Access:
Direct Hang
Cable
penetrates fabric through
zipper
needs. DuctSox are available in
Cylindrical,
D-Shape,
or quarter-Round.
is closed with dual-pull locking zippers.
Round
D-Shape
Quarter-Round
Whether horizontal, vertical, or angled, Cylindrical DuctSox are available in a variety of suspension and retention systems.
Patent Pending
For applications where the DuctSox will be mounted against
a flat surface (wall, ceiling, or both), the Surface Mount
products feature flexibility for shape, configuration, and inlet position (end, top, back).
Due to a policy of continuous development, prices and specifications
are
to change
without notice.
Track
(orsubject
Tension Cable)
Suspension
Smooth-Air
Christchurch: SkeleCore IHS
Wellington: SkeleCore IHS (Internal Hoop System)
utilizes Internal Hoops
Auckland:
to help maintain
Spaced 12"
(305mm)
Gliders: 766
0800 SMOOTH (0800
684)
apart along Track
Cable. 8358, Riccarton
264 Annex Rd, POorBox
10a Te Puni St, Petone (PO Box 8358, Chch)
6 Stanway Pl, PO Box 12-243, Penrose [email protected]
Fax +64 3 343 6004
Fax +64 4 566 3143
Fax +64 9 579 3259
3 June
2014 start-up
Technical
Catalogue
IHS improves
performance
Ph +64 3 343 6184
Ph +64 4 566 7969 Ph +64 9 579 3257
53

DuctSox Technical details - Smooth

Transcription

Similar documents

mariners supply pigeon forge

LU004 Hockney Corner Sofa - sofa comes in two parts to form an L

DECORATIVE FABRIC SALE Boca Bargoons has 1000`s and 1000`s

Rollac Zipshades - Rollac Rolling Shutters

SHIVA OIL PAINTSTIKS ON FABRIC

SW brochure - StretchWall Installations, Inc.

“Poke Berry Basket” Supply List

CoatsCrafts.co.uk

Dritz espadrille pattern

Dublin_T2 - Fabric Architecture