MADE FOR YOUR INSPIRATION

Transcription

MADE
FOR YOUR
INSPIRATION
HEALTHCARE
table of contents
SIMPLIFYING YOUR
FLOORING CHOICES FOR
HEALTHCARE BUILDINGS
HEALTHCARE buildings
main requirements
& Healthy & Healing environments
& Durable & Sustainable Buildings
& Safe & Efficient Functional Solutions
4
6
8
TARKETT SOLUTIONS
& Cafeterias
12
14
16
18
20
22
24
26
28
29
30
& Technical data at a Glance
32
& References
34
& A solution for every Space
& Reception & common areas
& Corridors
& Cleanrooms & Operating Theatres
& Imaging Areas
& Treatment Rooms
& Sterilisation Units
& Patient Rooms
& Showers
Tarkett has more than 130 years of experience in commercial flooring and offers the largest
multi-material range of solutions, wall protections and accessories for flooring. Through the
years, we have developed innovative and high quality flooring products to target the specific
design and functional requirements of every type of space, along with advice on installation
and maintenance to ensure an optimal lifetime performance.
In this guide, we recommend our most suitable flooring solutions among our multi-material
portfolio, meeting health care requirements such as indoor air quality, acoustic comfort,
durability and resistance, hygiene and maintenance.
& Toilets
Good interior design can affect people in many ways, contributing to patient recovery and
medical staff efficiency. We are eager to share our experience with you and make your
flooring choice that much easier.
After all, our floors are made for your inspiration!
2
Tarkett
3
Indoor Air Quality
context
CREATing HEALTHY
& healing
ENVIRONMENTS
Environmental aspects, such as
indoor air quality, adequate interior
design and noise level affect
patients and influence medical
staff behavior.
Improving these elements has
significant benefits and helps the
healing process.
context
Indoor air is 2 to 5 times more polluted than outdoor air, contributing to
the development of asthma and allergies. Nurses and housekeeping staff
are particularly affected by occupational asthma that is mostly present
in medical settings due to the use of harmful chemicals contained in
cleaning and disinfection products.
Solutions
& No harmful components that have a direct effect on people’s health
& T he lowest VOC emissions from 10 to 100 below the levels required
by ISO 16000 standard (<1000 µg/m3)
& No toxic pollutants – strippers, wax or polish – required for maintenance
&C
ompatible & efficient results with non-harmful disinfection
procedures such as vapour, or hydrogen peroxide (H2O2) disinfection
Formaldehyde
presence
Phthlate-free
technology
REACH
compliancy
4
No
%
%
No
%
%
& Create an adapted interior design, with a large choice of materials
and designs, using appropriate colours and contrast
& Improve the appearance of cleanliness using certain patterns and finishes
& Use logos and signage on floor with Floorcraft service to ease orientation
& Follow-up practical guidelines for aged care Alzheimer units
& Create a seamless finish thanks to multi-colour welding rods
No
%
%
< 100 No
%
%
< 10 context
Noise can be an extremely negative environmental factor in hospitals: it
increases patient pain perception and consequent use of medication,
can cause sleep deprivation and patient confusion, and may increase the
potential length of a hospital stay. Noise (from tile surfaces, metal equipment,
alarms, beepers, overhead paging, etc.), is one of the most common
causes of complaints from inpatients and is also frequently cited by staff
as a cause of increased stress.
Solutions
To reduce noise, and in accordance with building constraints, Tarkett
offers a range of flooring solutions that:
& Reduce sound transmission from rooms above particularly important
for patient bedrooms (must be generally below 60 dB)
& Limit the noise made by footsteps, rolling medical beds and trolleys,
especially in corridors servings bedrooms
& Facilitate heavy bed and trolley movement with low rolling resistance,
improving medical staff comfort
In-room noise
Indicative footfall noise flooring category
In-room noise
Ln,e,w dB
NF S 31-074
Tarkett solutions
Class
Vinyl on foam backing
~ 63 dB
Tapiflex
iQ Acoustic
Class A < 65 dB
Linoleum on foam backing
~ 64 dB
Linoleum Silencio
Class A < 65 dB
Linoleum on cork backing
~ 65 dB
Linoleum Acoustic Cork
Class B < 75 dB
Vinyl compact
~ 75 dB
Acczent
iQ
Class C < 85 dB
Cement Slab (14 cm)
~ 78 dB
-
Class C < 85 dB
Ceramics
~ 100 dB
-
Class D ≥ 85 dB
type
Design can be tailored to the shape of any floor area.
Impact sound
Indicative impact sound transmission
< 100 No
No
%
Naturally
phthalatefree
%
Acoustic Comfort
FLOORCRAFT DESIGN SERVICES
Linoleum xf²TM / Linosport xf²TM
(Linoleum)
< 10 Omnisports
(Vinyl sport flooring)
< 10 Safetred
(Safety floor)
iD Inspiration 55 / 70
(LVT)
< 10 To create a suitable visual environment with Tarkett, you can:
For a more individual design, our Floorcraft service translates your ideas
into unique flooring concepts.
Acczent Evolution & Excellence 80
(Heterogeneous vinyl)
iQ / Premium / Multisafe
(Homogeneous vinyl)
GOOD MATERIALS FOR GOOD INDOOR AIR QUALITY
TVOC level
(after 28 days
µg/m3)
The practical applications of colour, pattern, texture and light reflection are
particularly important to creating interiors that have a positive influence on
people. They help reduce stress and can better identify, unify or separate
spaces. It’s even more important in an aged care unit, where interior design
is key to improving Alzheimer patient comfort and safety. Also essential is
the perception of a cleaner appearance thanks to stains and marks that
are less visible, as well as easier orientation throughout the building.
Solutions
To contribute to a benign setting, Tarkett’s flooring solutions have minimal
impact on air quality:
Tarkett
ranges
(flooring type)
Visual Comfort
%
H ealthcare buildings m ain re q uire m ents
Healthcare
buildings MAIN
REQUIREMENTS
Impact Impact noise
Cement
noise bare reduction
slab
cement
needed
thickness
slab
EN ISO 717/2
Tarkett solutions
Impact noise
reduction
EN ISO 717/2
14 cm
78 dB
≥18 dB
Tapiflex Essential
Tapiflex Excellence
Linoleum Silencio
20 dB
19 dB
18 dB
16 cm
76 dB
≥16 dB
Tapiflex Evolution
iQ Optima Acoustic
Primo Acoustic
17 dB
17 dB
17 dB
18 cm
74 dB
≥14 dB
iQ Granit Acoustic
Linoleum Acoustic Cork
Linoleum + Elafono
15 dB
15 dB
up to 15 dB
Tarkett
5
Durability
& resistance
context
INVESTING IN DURABLE
& SUSTAINABLE
buildings
A hospital runs permanently. Some
areas support heavy traffic; others
like bedrooms or operating theatres
are difficult to renovate.
Minimising maintenance costs,
environmental impact and renovation
operations are key challenges
for hospitals.
HYGIENE, EASY CLEANING
& Low-Cost Maintenance
context
Hospitals run 7 days a week, 24 hours a day. Therefore it is important to
select durable material that will resist heavy traffic and rolling loads, and
doesn’t require heavy maintenance procedures or replacements that
block an area, a real headache in occupied buildings. In heavy traffic
areas, select flooring with high welding resistance whose seams stay
intact during several years. In medical areas, flooring must be particularly
resistant to stains and chemicals, as well as heavy medical equipment.
Solutions
Sustainability
Commitment
context
In the continuing effort to cut costs without impacting on patient care,
hospitals are faced with a delicate balancing act that involves close
scrutiny of all spending. A review of maintenance costs is one area that
can offer enormous potential savings. In particular, the choice of the right
flooring and wall protection offers significant savings in terms of energy,
water and maintenance chemical consumption, as well as labour costs.
Solutions
Sustainable building design is key to durable constructions that have
minimal environmental impact, without compromising on quality of life.
All building materials, including flooring, must meet specific norms to
earn certification from one of the existing eco-building systems around
the world (LEED (US), BREEAM (UK), HQE (France), etc.).
Solutions
To minimise daily attacks and stresses, especially to abrasion, scratches
and stains, and to facilitate maintenance procedures, Tarkett proposes:
Tarkett strives to minimize your maintenance costs and make daily
cleaning easier:
Tarkett is a leader in environmentally responsible manufacturing and
sustainable product development with our 4 key pillars:
& iQ: Unique restoration properties for homogeneous vinyl; only with
dry-buffing. No strip, polish nor wax ever needed. Offering high resistance
to chemicals, disinfectant and heavy loads. The highest welding resistance
& Keep to a minimum the levels of dirt and moisture that are carried
into the building with 3-step entrance mats
& Use better materials: natural, renewable and recycled resources,
Cradle to Cradle certification for linoleum
& Choose low-maintenance products that require neither stripping, wax
nor polish, and covings that make cleaning easier in sensitive areas
& Use fewer resources: limit water, energy consumption and waste
generation
& Go for an iQ chemical-free restoration solution in heavy traffic areas
such as corridors
& Create people-friendly spaces: lowest VOC emissions and
phthalate-free technology
& xf²TM: Extremely strong and tough surface for linoleum. Highly
resistant to abrasion and stains
& Space out painting renovation using protection that resists
scratches, shock and is easily washed and cleaned
& Recycle program contributes to environmental protection
iQ dry buffing: Durability and unique restoration properties
LCC calculation to compare flooring cost effectiveness
CLOSED-LOOP CIRCULAR DESIGN
& TopClean XPTM: Reinforced PU coating for heterogeneous vinyl to
improve scratch, abrasion and stain resistance. Neither wax nor
polish required
Healthcare
buildings MAIN
REQUIREMENTS
Tarkett has developed a program called Life Cycle Cost analysis (LCC) to compare the total
cost for cleaning and maintenance of different flooring materials.
• Homogeneous wear layer 2 mm thick
• Can be restored with mechanical dry buffing
• Durable for 25 years and more
K€
3,000
2,000
1.5 y
1,000
Before dry buffing
After dry buffing
0
Year 1
Year 2
Year 3
Year 4
Year 5
Year 6
Year 7
Year 8
Year 9 Year 10
iQ performances
Polished floors
• Up to 30 % Cost saving
• 50 % Water saving
• 20 % Chemical saving
iQ
Usual return on investment = 1.5 year
iQ vs Polished floor Hospital 10,000 m²
6
Tarkett
7
Healthcare
buildings MAIN
REQUIREMENTS
3
4
low risk
no invasive practice
serious risk
invasive practice
with risk linked to the environment
very high risk
high risk invasive practice
Entrance corridor, stairs,
laundry, waiting room,
consulting room, bedroom,
wetroom, psychiatry,
medicalaged care home,
administration, offices,
technical logistic services...
Maternity, nursery, endoscopy,
hemodialysis, recovery room,
intensive care, sterilization,
sterilized material storage,
autopsy room…
Emergency, operating theatre,
childbirth rooms, laboratory,
graft department, radiology
with functional exploration…
High risk operating theatre
(orthopedic implant, burn…),
burns unit, hematology,
pharmacy (sensitive preparation
Easy to clean
Reduces soiling
Easy to clean
Reduces soiling
Watertight / decontaminable /
desinfectable / low particle
emission
Watertight / decontaminable /
desinfectable / low particle
emission
microbiological class
(maximum concentration
of alive paticles – unit forming a
colony – per cubic meter)
-
M100
(100 UFC / m3)
M10
(10 UFC / m3)
M10
(10 UFC / m3)
particle class
-
ISO 8
ISO 7
ISO 6 - 5
Daily
Daily
After each operation
After each operation
AREA / room
context
In areas with a high risk of infection
or controlled environments, flooring
contributes to infection control
and air cleanliness, preventing the
spread of infection due to the
environment.
2
moderate risk
invasive practice
not connected with the environment
Infectious risk
Infection Control &
Controlled Environment
Selecting safe &
efficient functional
solutions
1
Level (NF S 90-351)
According to the European Centre for Disease Prevention and Control,
6 % of acute hospital patients will acquire at least one health careassociated infection (approximatively 3 million people). Infection control
is a major challenge for all health care facilities. Even if the environment
is not a primary source of contamination, it is important to make it easy
to clean and decontaminate in high risk infection areas. According to the
World Health Organisation (WHO) 90 % of micro-organisms are present
in visible dirt. Therefore, efficient cleaning is a high priority, especially in
the sensitive areas.
In addition, controlled environments - recommended in areas where the
risk of infection is high - must keep airborne particle contamination to
required levels. The construction and use of cleanrooms is designed to
minimise the introduction, production and retention of particles inside
the room. According to the ISO14644-1 “classification of air cleanliness”, rooms are classified with an ISO rating from 1 (the best one) to 9.
This classification defines particle concentration limits (particles/m3 of
air per size).
material to use
cleaning frequence
1
For these sensitive rooms, Tarkett proposes 2 solutions depending on the need to
evacuate electrostatic discharge or not:
2
• without electrostatic discharge evacuation:
iQ FLOORING + PROTECTWALL 2CR
• with electrostatic discharge evacuation:
iQ TORO SC + PROTECTWALL 2CR
3
Hygiene and cleaning efficiency
• Perfectly smooth and impervious surfaces
• Exceptional welded joint resistance
> 800 N / 50 mm (EN 684)
• Excellent flexibility, easy to weld
• Round coving with cover former
• Perfect welded junction between wall and floor
4
Particles contamination control
• ISO 4 certified (ISO 14644-1)
• Suitable for cleanroom according to ASTM F5I/F24
Solutions
5
Wall protection
• ProtectWALL 2CR: no damage observed following
impact test EN 259-1 & ASTM D4226
To ensure efficicent cleaning and a high hygienic standard in areas where
there is a risk of infection, flooring and walls must be:
& Sealed, smooth, with an impervious surface and minimal joints
COVE FORMER
5
& Perfectly watertight with firmly welded joints that will not break or split
VINYL FLOOR COVERING
7
& Meticulously installed to prevent dirt from collecting
& Compatible with cleaning chemicals and frequent disinfection
procedures
6
Stain and chemical resistance
• Good resistance to stains and chemicals
2
Regarding controlled environment and airborne particle contamination,
ISO 5 Class is usually the highest requirement for healthcare, and is used
for the most sensitive rooms where there is a risk of infection.
3
7
Electrostatic discharge evacuation
• iQ Toro SC: Conductive floor with low electrical
resistance R < 106 Ω (EN/IEC 61340-4-1)
• Pure carbon backing
• Reduces the amount of conductive glue required
(only for the copper strip, sheet function)
6
Heavy load resistance − Easy rolling
• High indentation resistance 0.02 mm (EN 433)
• Heavy load resistance: 50 kg/cm²
• Rolling resistance equivalent to concrete
1
8
Indoor air quality
• iQ Toro SC: emissions below quantifiable level,
FloorscoreTM certified, A+ rated
• ProtectWALL 2CR: < 100 μg/m3
4
iQ and ProtectWALL 2CR ranges are classified ISO 4 (emitting 1,000 less
than ISO 5) according to the Fraunhofer institute, and comply with the US
cleanroom ASTM F51/F24 standard.
Hospital zones Infectious risk classification
Earth connecting
iQ Toro SC
A 100 cm copper strip
is placed lenghtways
under transversal joints.
Tarkett
9
Electrostatic
Discharge
Accessibility
context
Selecting safe &
efficient functional
solutions
Finding your way around an hospital
can be difficult. Flooring plays an
important role in providing visual
and tactile guidance cues for visually
impaired people. It also helps to
prevent slips, so that people move
safely around a building.
For specific applications, it evacuates
electrostatic discharge, securing
medical practice.
Slip resistance
context
Electrostatic discharges not only cause discomfort, but may also damage
sensitive technical equipment and ignite flammable gases. Static conductive
flooring is often recommended in operating theatres to ensure the safety
of sensitive surgeries such as neonatalogy, cardiology or neurology.
context
An international directive requires that hospital buildings, as public
buildings, must be accessible to impaired people (ISO 21542 standard
for building conception). Visually impaired people in particular need help
to avoid accidents and find their way.
Solutions
Solutions
Dissipative or conductive flooring solutions evacuate electrostatic
discharge:
& E N/IEC 61340-4-1 defines the electrical resistance: measurement of
the capacity of the flooring material to conduct electrical charges to
a ground point. The higher the resistance, the lower the conductivity
& iQ Toro SC is a conductive flooring, iQ Granit SD is a dissipative
flooring. Both benefit from the unique and patented conductive iQ PUR,
and a carbon backing
Dissipative & conductive Floorings
Healthcare
buildings MAIN
REQUIREMENTS
Slipping can cause serious injuries, tallying up an annual cost of € 900
million in Europe*, especially in hospitals where patients are weaker.
People are most exposed to falls in wet areas.
*source: INRS/NHS
Solutions
Flooring and accessories help to improve accessibility and guidance:
A floor’s degree of slip-resistance must be selected depending on:
& Colour contrasts that respect a minimum 30 points LRV difference
improve visual cues; an LRV difference of 60 points or more is
recommended for danger signs and written information or logos
& Whether people are wearing shoes or not, and then the respective
standards (barefoot or wearfoot standard)
& Tactile guide strips indicate adapted routes to selected strategic
destinations
& Our Multisafe and Safetred ranges are dedicated to people safety:
they have exceptional and durable slip-resistance properties
(R10 and R11 options)
& Tactile warning tiles indicate caution before lifts and stairs
& Type of liquid spillage: water and/or viscous material (oil, grease...)
& Signage, through our Floorcraft service, assists orientation
ACCESSIBILITY SOLUTION
SLIP RESISTANCE PERFORMANCES
New generation of static control floorcovering for greater safety in sensitive environments.
Standards
Technical
data
Standards
iQ Toro SC
iQ Granit SD
Primo SD
Electrical
insulation
VDE 100, Part
600
Ri ≤ 5 x 104 Ω
Ri ≥ 5 x 104 Ω
Ri ≥ 5 x 104 Ω
Static
electrical
charge
EN 1815
< 2kV
< 2kV
ESD-approval
SP-method 2472
8
R ≤ 10 ohms
106 ≤ R ≤ 108
ohms
R1 5 x 104
≤ R ≤ 106 ohms
R1 ≤ 108 ohms
Barefoot areas
Shower rooms
Lockers
< 2kV
-
-
R2 5 x 104
≤ R ≤ 106 ohms
R2 ≤ 108 ohms
EN/IEC 61340-4-1
-
-
EN/IEC 61340-4-1,
100V
5 x 10
≤ R ≤ 106 ohms
5 ≤ 108 ohms
-
EN/IEC 61340-4-5
≤ 3.5 x 107
ohms
-
-
4
Wearfoot area
Kitchens
Lavatories
Workshops
2
1
R1 ≤ 108 ohms
4
3
2
Class B (shower room – changing room): angle > 18°
Class C (constantly under water): angle > 24°
EN13845 Annex C
1
10
DIN 51097
DIN 51130
EN 1081
Electrical
resistance
Standard requirement
Class A (occasional water protection): angle > 12°
Stair nose
Tactile warning tiles & 3D studs
3
4
Barefoot areas
Shower rooms
Lockers
Tactile guide strips
Floorcraft service
Wearfoot area
Kitchens
Lavatories
Workshops
Esb: angle >15°
R10: Occasionnal water spillages
R11: Water and viscous spillages
BS7976 Part 2 =
TRRL Pendulum
4S (wet)
> 36°
Surface roughness
rz
> 20 µm
EN13845 Annex C
Esf: angle > 20°
Tarkett Solutions
Solution Technical Value
Multisafe Aqua
Class A (Water rings pattern)
Class C (Stone & Fiber wood patterns)
Safetred Aqua
Class B / Esb
Optima Multisafe
Class B
Granit Safe.T
Class B / Esb & Esf
Granit Multisafe
Class C
Safetred solutions
R10 / ≥ 36° / > 20 µm / Esf
Safetred Universal Plus
R11 / > 45° / ≥ 35 µm / Esf
Granit Safe.T
R10 / Esf
Tarkett
11
1
5
A solution for ever y s p ace
A solution
for every Space
Reception & Common Areas
➜ iD Inspiration 70
2
4
➜ iQ Granit
3
3
6
C
orridors
Cleanrooms
& Operating Theatres
➜ iQ Toro SC
4
Imaging Areas
➜ iQ Granit
5
T reatment Rooms
➜ Tapiflex Evolution
6
Sterilisation Units
➜ Safetred
9
7
P
atient Rooms
➜ Acczent Excellence 80
8
S
howers
➜ Multisafe Aqua
9
Toilets
➜ Safetred
8
10
Cafeterias
➜ iD Inspiration 70
1
7
2
10
Find more information
about our Healthcare solutions on
www.professionals.tarkett.com/solutions/healthcare
12
Tarkett
13
Reception
& COMMON areas
R ece p tion & co m m on areas
2
4
3
5
1
Resistance to abrasion and durability is the most important
criteria for these very high traffic areas. When people
enter the hospital, their first impression will be decisive.
The entrance must inspire confidence, be clean and
welcoming, and facilitate accessibility and orientation
around the building.
1
iD Inspiration 70
iD Inspiration 70
iQ Eminent
Acczent Excellence 80
Modularity for
customised spaces
Durability and resistance
Resistance and inspiration
Product type
LVT
Compact homogeneous vinyl
Compact heterogeneous vinyl
Main advantages
• A wide choice of 118 patterns and colours
• P ersonalisation possibilities available through
customisation programme
• TopClean XPTM reinforced surface treatment
• Low TVOC < 10 μg/m3
• Phthalate-free technology
• Made in Germany
• iQ chemical-free surface
restoration
• Lasts for 25 years, 2 mm wear
layer
• Low TVOC < 10 µg/m3
• 117 design and colour options
• Fully available in acoustic or
compact version
• TopClean XPTM reinforced
surface treatment
• Low TVOC < 10 µg/m3
floor recommendation
Main requirements & performances
Durability & resistance
Easy cleaning & low-cost maintenance
Visual comfort









2
Wall RECOMMENDATION
ACCESSORIES RECOMMENDATION
ProtectWALL 2.0
3
Design, shock and scratch
protection
LVT set-on decorative skirtings
•W
ide range of colour coordinated skirtings
• High burst & crack resistance
(EN 259)
4
• High weld resistance
•C
ontrasted and tactile strips provide better
> 400 N / 50 mm
orientation for visually impaired people
• Hot welding with compact floor
coverings
• Colour matching with most HE
and HO floorings
• Easy cleaning and maintenance
• Low TVOC < 10 μm/m3
Tactile guide strips
SERVICES
5
Floorcraft
• Logos and signage to ease wayfindings
➜ Find all technical data on pages 32/33
14
Tarkett
15
cORRIDORS
CORRIDORS
4
5
2
1
3
To each corridor its own flooring solution. A general corridor’s
priority is heavy traffic resistance. Technical corridors also
need to be resistant to traffic and offer easy hygiene.
Corridors along patient rooms require design, noise reduction
and low rolling resistance.
1
iQ Granit
iQ Granit
Tapiflex Evolution
The most durable resilient
floor
Acoustic comfort and low rolling
resistance
Product type
Acoustic heterogeneous vinyl
Main advantages
restoration
• Up to 30 % maintenance savings
• Easy coving, exceptional
sealed joint resistance
(> 800 N / 50 mm)
• 1 17 design and coulour options
• Available in acoustic or compact
version
• TopClean XPTM reinforced surface
treatment
• Sealed joints (hot-welded) and
round coving to ease cleaning
• 17 dB impact noise / Class A sonority
• Low rolling resistance with high
indentation performance (< 0.08 mm)
treatment
• Multi-colour sealed joints (hot-welded)
and round coving to ease cleaning
Durability & resistance
Acoustic comfort
Visual comfort












2
Wall RECOMMENDATION
ProtectWALL 2.0
ProtectWALL 2.0
Design, shock and scratch
protection
3
Vinyl cove formers or set-in skirtings
• For perfect coving and easier cleaning
• High burst & crack resistance
(EN 259)
• High weld resistance
> 400 N / 50 mm
• Hot welding with compact floor
coverings
• Colour matching with most HE
and HO floorings
• Easy cleaning and
maintenance
• Low TVOC < 10 μm/m3
4
Protectwall caps
• F or perfect finish and superior protection of the wall
covering edge
5
Protectwall set-in corners
• F or better finishing and protection at
the outer wall angle
16
Tarkett
17
C leanroo m s & O p erating T heatres
cleanrooms
& Operating theatres
2
3
1
Infection control is particularly important in areas with a
high risk of infection such as the operating theatre, which
may also require electrostatic discharge evacuation.
In medical laboratories and cleanrooms, the environment
must be controlled, especially air cleanliness.
1
iQ Toro SC
iQ Toro SC
iQ Granit
iQ Granit SD
Durability, hygiene and
conductivity
floor
Durability, hygiene and
dissipative
Product type
Main advantages
• P erfectly smooth, impervious,
easy to cove and weld
• Exceptional welded joint
resistance > 800 N / 50 mm
• P ermanently static conductive
flooring: ER ≤ 106 Ω
• Unique patented iQ conductive PUR
for durable and easy maintenance
floors
• Very low particle emissions, class
ISO 4 - comply with ASTMF51/F24
flexible handling for perfect coving
and watertight finish
• “Micro” plain design, particularly
adapted for easily finding needles
on the floor
• Very low particle emissions, class
ISO 4 - comply with ASTMF51/F24
• Perfectly smooth, impervious,
> 800 N / 50 mm
• High quality dissipative flooring: ER 108 Ω
• Electrical resistance of 106 Ω - 108 Ω
• iQ PUR for durable and easy
maintenance floors
• Very low particle emissions, class ISO
4 - comply with ASTMF51/F24
Wall RECOMMENDATION
ProtectWALL 2CR
Hygiene and shock resistance
•H
igh resistance to impacts and scratches:
3
Vinyl cove formers
•P
erfect coving for easier cleaning
Heavy duty EN259
•P
erfectly smooth, impervious, easy to cove
and weld with flooring
•P
UR surface treatment for easy cleaning
and maintenance
• L ow TVOC emission / Phthalate-free
technology
Wallgard
ProtectWALL caps
• F or perfect finish and superior protection of
the wall covering edge in case of half wall
protection
Optimum hygiene
Low particle emission
Visual comfort
2
ProtectWALL 2CR





-






•S
mooth and impervious surface with PU-Shield
•H
igh flexibility, easy to cove and weld with
flooring
• L ow TVOC emission / Phthalate-free technology
18
Tarkett
19
IMAGING AREAS
IMaging areas
iQ Granit
4
5
2
ProtectWALL 2.0
3
Heavy load resistance and easy cleaning are important
requirements. Electrostatic discharge evacuation may be
required according to the imagery equipment. Design
is also essential in reducing patient stress and anxiety.
1
1
iQ Granit
iQ Toro SC
Acczent Evolution
floor
Durability, hygiene and conductivity
Product type
Main advantages
restoration
• Wide choice of 62 colours
•R
adioactive decontamination
rated “GOOD” following ISO 8690
• Perfectly smooth, impervious, easy to
cove and weld
> 800 N / 50 mm
• Permanently static conductive flooring:
ER ≤ 106 Ω
• Unique patented iQ conductive PUR for
durable and easy maintenance floors
• Radioactive decontamination rated
“GOOD” following ISO 8690
• Wide choice of 66 colours and
patterns
• TopClean XPTM reinforced
surface treatment
• Smooth, impervious, sealed
joints (hot-welded) and round
coving to ease cleaning
• Perfect coordination with
Protectwall



-




Wall RECOMMENDATION



-
3
Vinyl cove formers
• For perfect coving and easier cleaning
4
Protectwall caps
• F or perfect finish and superior protection of the wall
covering edge
ProtectWALL 2.0 or 2CR
Easy cleaning and shock resistance
Visual comfort
2
•H
igh resistance to impacts and scratches: Heavy duty EN259
•P
erfectly smooth, impervious, easy to cove, easy to weld with flooring
•P
UR surface treatment for easy cleaning and maintenance
•S
uitable for radioactive decontaminatation
• L ow TVOC emission / Phthalate-free technology
5
outer wall angle
20
Tarkett
21
T reat m ent roo m s
TREATment
Rooms
2
4
3
1
Dialysis, intensive care, recovery rooms… All these areas
where patients receive treatements and care require
comfort and hygiene, and must be resistant to chemicals
and stains. An adapted solution must be chosen according
to the risk of infection.
1
Tapiflex Evolution
Tapiflex Evolution
iQ Optima
resistance
floor
Product type
Acoustic heterogeneous vinyl
Main advantages
• Wide choice of 66 colours and patterns,
perfect coordination with ProtectWALL
range
• 17 dB impact noise / Class A sonority
• Low rolling resistance
treatment
• Can be welded for sealed joints and
installed with coving to ease cleaning
• Class C in-room sonority
(vs Class D for ceramics)
treatment
• Can be welded for sealed joints
and installed with coving to ease
cleaning
restoration
• Easy coving, exceptional welded
joint resistance (> 800N / 50 mm)
• P hthalate-free technology








22
ProtectWALL 1.5
Design and protection
•B
urst, crack, scratch and abrasion
resistance (EN 259)
• E asy cleaning and maintenance properties
•H
igh resistance to chemicals
•1
9 colours, mix & match with floors patterns
• L ow TVOC < 10 μg/m3
•P
hthalate-free technology
3
Preformed skirtings
& outer corners
• E asier to maintain as it is welded to floor
covering
4
ProtectWALL caps
•P
erfect finish and superior protection of the
wall covering edge
Design, shock and scratch protection




Wall RECOMMENDATION
ProtectWALL 2.0
Acoustic comfort
Visual comfort
2
ProtectWALL 2.0
•H
igh burst & crack resistance (EN 259)
•H
igh weld resistance > 400 N / 50 mm
•H
ot welding with compact floor coverings
•C
olour matching with most HE
and HO floorings
• E asy cleaning and maintenance
• L ow TVOC < 10 μm/m3
•P
Tarkett
23
SteriliSation
Units
3
S terilisation U nits
2
1
Sterilisation units are composed of different sub-zones to
comply with meticulous hygiene requirements, from
dirty material reception to sterilised equipment storage,
where flooring must resist heavy trolley rolling.
Splashed water is frequent.
1
Safetred Ion
Safetred
Granit Safe.T
iQ Optima
Design and wearfoot slip
resistance
Flexibility and wearfoot slip
resistance
floor
Product type
Main advantages
• Wide choice of colours and patterns
• Durable anti-slip resistance: R10 / Esf
• Watertight solution, sealed joints,
impervious surfaces
• Safety Clean XPTM surface treatment
• Highly flexible, easy coving
• Durable anti-slip resistance:
R10 / Esf
impervious surfaces
• Easy coving, exceptional joint
resistance (> 800N / 50 mm)
• Safety Clean XPTM surface
treatment
restoration
• Easy coving, exceptional welded
joint resistance (> 800N / 50 mm)
2
Wall RECOMMENDATION
ProtectWALL 1.5
3
ProtectWALL caps
•P
erfect finish and superior protection of the
wall covering edge
Cove former
•P
ProtectWALL 1.5 or 2CR
Slip resistance
Visual comfort












•H
igh burst & crack resistance (EN 259)
•H
igh weld resistance > 400N / 50 mm
•1
•P
24
Tarkett
25
Patient roo m s
PAtient rooms
4
2
1
3
A variety of studies have shown that a room’s environment
can contribute to patient recovery. It also influences
the behaviour of and interaction between patients, their
families and care staff. Patient comfort is a priority,
without compromising on cleanliness and hygiene.
1
iQ Natural
Tapiflex Evolution
floor
resistance
Product type
Acoustic heterogenous vinyl
Main advantages
• 1 17 design and colour options
• Available in acoustic or compact
version
• Sealed joints (hot-welded) and
round coving to ease cleaning
• Made of 75% natural and
renewable raw materials
• Wide palette of colours
inspired by nature
restoration
• Perfectly smooth, impervious,
• Wide choice of 66 colours and patterns,
perfect coordination with ProtectWALL range
• 17 dB impact noise / Class A sonority and low
rolling resistance
• Sealed joints (hot-welded) and round coving
to ease cleaning
Indoor air quality
Visual comfort
Acoustic comfort












2
Wall RECOMMENDATION
ProtectWALL 1.5
3
Set-on skirtings (KS61)
•P
VC semi-flexible decorative skirting for decorative use
•C
oordinated colours
Vinyl cove formers
•P
ProtectWALL 1.5
•B
urst, crack, scratch and abrasion resistance (EN 259)
•H
•1
•P
4
ProtectWALL caps
•P
erfect finish and superior protection of the wall
covering edge
26
Tarkett
27
TOILETS
T oilets
S ho w ers
SHOWERS
2
2
3
1
3
4
4
1
Multisafe Aqua
1
floor recommendation Multisafe Aqua
Aquarelle Wall HFS
Granit Multisafe
Granit Safe.T
Design and barefoot slip
resistance
Flexibility and high barefoot
slip resistance
Flexibility and multi-slip
resistance
Product type
Main advantages
•U
nique designs for use in wetrooms
• Embossed surfaces for barefoot slip
resistance: Class A / B or Class C
• Easy to clean embossing with
TopClean XPTM PUR reinforcement
• Full watertight system with limited
number of joints
• S tudded surface for highest barefoot slip resistance: Class C / Esb
• Full watertight system with limited
number of joints
•H
ighly flexible to ease coving
•B
arefoot slip resistance:
Class B / Esb
• Wearfoot slip resistance: R10 / Esf
• F ull watertight system with
limited number of joints
• S afety Clean XPTM surface
treatment








Barefoot slip resistance
Visual comfort
Safetred Aqua
1
floor recommendation Safetred
Granit Safe.T
Primo Safe.T
Flexibility, wearfoot slip
resistance
Wearfoot slip resistance
Product type
Main advantages
• Wide choice of colours
R10 / Esf
impervious surfaces
• Safety Clean XPTM surface treatment
• Highly flexible, easy coving
R10 / Esf
impervious surfaces
• Safety Clean XPTM surface
treatment
• Slip resistance: R10
impervious surfaces
• Safety CleanTM surface treatment












Slip resistance
Visual comfort




2
Aquarelle Wall HFS
Wall RECOMMENDATION
Aquarelle Wall HFS
Full watertight system
•W
aterproof installation
•2
metre width, fewer joints, more hygienic
• F lexible structure for an easier installation
•W
ide range of colours;
3
C
ove formers & junction profiles
• Flexible junction profile to reduce a difference in
thickness between floor and wall coverings for a perfect
junction and a watertight installation
4
Drains & gratings
• Wide range of drains and gratings with various
options according to installation requirements
T hreshold transitions for wetrooms
•R
ubber or vinyl threshold
• V inyl threshold to be hot welded
coordination with Multisafe flooring ranges
• E asy cleaning
28
Tarkett
29
C afeterias
CafeteriaS
4
5
3
2
1
People use these areas to relax. Design, ambiance, light
and noise reduction are key, as well as easy cleaning and
resistance to traffic, indentation and food stains.
1
floor recommendation iD Inspiration 70
iD Inspiration 70
iQ Eminent
Modularity for customised spaces
The most durable
resilient floor
Product type
LVT
Main advantages
• 118 patterns and colours to play with
and combine
• Personalisation possibilities available
through customisation programme
• Made in Germany
• Unique wood offer with new
multi-colour welding rods and matte
finish for authentic aspect
• Can be welded for sealed joints and
installed with coving to ease cleaning
• iQ
chemical-free surface
restoration
• Easy coving, exceptional
welded joint resistance
(> 800N / 50 mm)
• Low
TVOC < 10 μg/m3
Acoustic comfort, in-room noise
Visual comfort
Easy and low-cost cleaning












2
Wall RECOMMENDATION
ProtectWALL 1.5
3
LVT set-on decorative skirtings
•W
ide range of colour coordinated skirtings
4
Protectwall caps
•P
erfect finish and superior protection of the wall
covering edge
ProtectWALL 1.5
•B
urst, crack, scratch and abrasion resistance (EN 259)
•H
•1
•P
5
the outer wall angle
Preformed skirtings & outer corners
• E asier to maintain as it is welded to floor covering
30
Tarkett
31
Acoustic
comfort
Controlled
environments
Wallgard
ProtectWALL 2CR
19
12
6
6
-
4 dB
(6 dB: Spectrum)
-
-
-
-
Acoustic improvement
NF S31-074
-
Class C
Class A
-
-
-
Class C
-
-
-
-
34
34
34
34
34
34
34
31
33
-
-
-
2.00 mm
-
2.00 mm
0.55 mm
0.12 mm
< 0.10 mm
≤ 0.10 mm
≤ 0.10 mm
-
Wear layer thickness
ISO 24340 (EN 429)
2.00 mm
0.80 mm
1.00 mm (1)
0.90 mm (3)
1.00 mm
0.90 mm (2)
0.70 mm (3)
0.70 mm
2.00 mm
Indentation
ISO 24343-1 (EN 433)
0.02 mm
0.03 mm
0.05 mm
0.08 mm
0.05 mm
≤ 0.10 mm
Resistance to impacts
EN 259-2
-
-
-
-
-
-
-
-
-
No visible burst nor crack
-
No visible burst
nor crack
Scratch resistance
-
-
-
-
-
-
-
-
-
% -
% Curl resistance to heat
ISO 23999 (EN 434)
-
≤ 8.00 mm
≤ 8.00 mm
≤ 2.00 mm
-
-
-
-
≤ 8.00 mm
≤ 2.00 mm
≤ 2.00 mm
-
≤ 2.00 mm
0.02 m² K/W
Suitable
0.03 m² K/W
Suitable
0.01 m² K/W
Suitable
0.01 m² K/W
Suitable - Max 27°C
0.01 m² K/W
Approx. 0.01 m² K/W
0.01 m² K/W
-
0.02 m² K/W
-
0.02 m² K/W
-
≥ 240 N / 50 mm **
≥ 240 N
≥ 150 N / 50 mm
TopClean XPTM
Transparent
wear layer
Approx. 0.01 m² K/W
0.03 m² K/W
Suitable
0.02 m² K/W
Suitable
(1)
0.02 mm
≤ 0.10 mm
800 N/50 mm
400 N / 50 mm **
400 N / 50 mm **
-
≥ 240 N / 50 mm **
Surface treatment
iQTM
TopClean xpTM
TopClean xpTM
TopClean xpTM
iQ PUR
Safety CleanTM
Safety CleanTM
-
% No strip, no wax
% No wax, no polish
%
%
%
%
%
%
%
%
-
DIN51130
R9
R9 / R10 (Wood)
R9
R9
R9/R10 (depending
on embossing)
R10
R10
-
DIN51097
-
-
-
-
-
-
Class C
EN 13845 Annexe C
-
-
-
-
-
Esf
Static electrical discharge
EN 1815
< 2 kV
≤ 2 kV
on concrete
< 2 kV
on concrete
≤ 2 kV
on concrete
< 2 kV
< 2 kV
Stain & chemical resistance
ISO 26987
Excellent
High resistance
High resistance
High resistance
Excellent
-
-
-
-
ISO Class A (except iQ Megalit)
Class A
-
-
Does not favour growth
Does not contribute
to infection spreading
< 10 µg/m3
Phthalate-free technology
% recyclable
Contamination control
EN 14644-1
% recycled content
32
12
-
ISO 16000
TVOC ≤ 1000 µg/m3
(2) Sand
12
2 dB
Hygiene
(1) Salt & Pepper
16
17 dB
Cleanroom test
ASTM F24/65 / ASTM F51/00
Indoor
air quality
&
Environment
62
-
Seam strength
EN 684
Slip
resistance
18
-
Thermal resistance / Underfloor heating EN ISO 10456
Easy and
low cost
maintenance
16
Impact sound reduction
EN ISO 717/2
Commercial Class
EN 685 - ISO10874
Durability
&
resistance
14
ProtectWALL 2.0
118
ProtectWALL 1.5
66
Wall protections
Aquarelle Wall HFS
66
Wetroom concept
Multisafe Aqua
117
iQ Toro SC
218
Nb of references
Safety
Heterogeneous
Granit Multisafe
Static control
Heterogeneous
Safetred Design
Ion
Universal
Spectrum
LVT glue-down
Homogeneous
Primo Safe.T
Tapiflex
Heterogeneous
Granit SAFE.T
Acczent
Homogeneous
iQ Granit SD
iQ
iD Inspiration 70
Homogeneous
Tapiflex
Evolution
Luxury Vinyl Tiles
Acczent
Evolution
Heterogeneous
Acoustic
Acczent
Excellence 80
Heterogeneous Compact
iQ Natural
Megalit
Eminent
Granit
Optima
Visual
comfort
Homogeneous Compact
T echnical data at a glance
TECHNICAL DATA
At a glance
(3) Other patterns
(4) Water rings
-
0.55 mm
1.30 mm
-
*
-
> 400 N / 50 mm
TopClean XPTM
-
-
-
-
Class A (4)
Class C (5) (6)
-
-
-
Esf / Esb
Esf / Esb
-
-
-
< 2 kV
on concrete
< 2 kV
≤ 2 kV - Antistatic
on concrete
-
Good resistance
Good resistance to everyday
substances
Good resistance
High resistance
Good resistance
-
-
-
-
-
-
ISO Class 4 / GMP
Class A
ISO Class 1 / GMP
Class A
-
-
-
-
-
-
-
Satisfactory
Class A
-
Does not contribute to
infection spreading
-
Does not contribute to infection
spreading
Does not favour
growth
Does not contribute to infection
spreading
Does not favour
growth
Does not contribute
< 10 µg/m3
< 10 µg/m3
< 10 µg/m3
< 10 µg/m3
< 10 µg/m3
< 100 µg/m3
< 10 µg/m3
< 10 µg/m3
< 10 µg/m3
< 100 µg/m3
< 10 µg/m3
%
%
%
%
%
%
%
%
%
%
%
100 %
100 %
100 %
100 %
100 %
100 %
100 %
100 %
100 %
100 %
100 %
26 %
37 %
-
42 % (Design / Ion)
40 % (Universal / Spectrum)
-
-
(6) Fibre wood
23 %
28 %
R9
R10
R10
R11
Class B (≥ 18°)
Esf / Esb
-
-
25.5 %
-
*
> 400 N / 50 mm
PU-Shield
TopClean XPTM
0.55 mm
-
-
(5) Stone
≥ 240 N / 50 mm **
0.35 mm
Does not contribute
Does not favour
growth
≤ 2 kV
Excellent
11 %
≤ 2 kV
Excellent
26 %
* Sclerometre test: Excellent, no visible scratch with naked eye
11 %
** Average value
Tarkett
33
O ur references
OUR
References
Location: Da Luz Hospital, Lisbon, Portugal
Architect: Atelier Risco
Flooring material: iQ Optima, iQ Toro SC, iQ Granit SD
Location: Rey Juan Carlos de Mostoles, Madrid, Spain
Architect: Rafael De La-Hoz
Flooring material: Acczent Excellence, Tapiflex Excellence
Location: University Hospital Center, Saint-Nazaire, France
Architect: Groupe-6
Flooring material: iQ Granit
Location: Manchester Royal Infirmary, Manchester, UK
Flooring material: Eclipse Premium, Safetred Universal, Safetred Aqua, Wallgard, iQ Toro SC
Location: Lebenstedt Hospital, Salzgitter, Germany
Architect: IB Prof. Vogt
Flooring material: iQ Granit
➜ See more references on our website: www.professionals.tarkett.com/references/search
34
Location: OFM Hospital, Antalya, Turkey
Architect: Sevda Sevimlier / Tarkett Aspen
Flooring material: iQ Eminent, Acczent Evolution
Location: Al Gahroud Hospital, Dubaï, Arab Emirates
Architect: Society Technology House (STH)
Flooring material: iD Inspiration, Eclipse Premium, iQ Toro SC, Eclipse SD
Tarkett
35
GET THE MOST OUT OF YOUR PROJECT
THROUGH OUR SERVICES
From design and total life-cycle cost to installation, Tarkett offers a wide range of services to help you maximise your
investment and make the most of your project.
Floorcraft Design Service
Bring your decoration ideas and inspiration to life by taking advantage of our comprehensive experience and exclusive service.
Whether you have prepared drawings, want to create a unique design or choose from specific design elements, our team is
ready to help.
Life-Cycle Cost Program
A floor covering’s profitability cannot be calculated using only its purchase price. All costs related to its maintenance must also
be considered. So Tarkett developed a program that can determine a flooring’s overall cost. It has notably demonstrated that,
over 20 years, cleaning and maintenance represent on average 92% of a flooring’s life cycle cost. To reduce maintenance costs
and environmental impact, Tarkett has therefore developed solutions such as the PUR treatment.
Tarkett Observer
TEC Training
We offer installation training complete with a certificate that validates your skill regarding this specific watertight installation.
RESTART
Tarkett also offers a collection service for post-installation waste, which is then treated in our recycling plants and reintegrated
into new floor coverings. You reduce your waste on site, and we improve our use of materials and resources.
If you need further information, please contact your Tarkett sales representative.
www.professionals.tarkett.com
■ WESTERN EUROPE: Austria: Tarkett Holding GmbH, Niederlassung Wien – Tel. +43 1 47 88 062 Belgium: S.A. Tarkett NV – Tel. +32 2 520 04 67 Denmark: Tarkett A/S – Tel. +45 43 90 60 11 Finland: Tarkett Oy – Tel. +358 9 4257 9000
France: Tarkett SAS – Tel. +33 1 41 20 42 49 Germany: Tarkett Holding GmbH, Bereich Objekt – Tel. +49 62 33 810 Greece: Tarkett Monoprosopi Ltd – Tel. +30 210 6745 340 Italy: Tarkett S.p.A. – Tel. +39 02 893 411 Luxembourg: Tel. +352 949 211 8804
Netherlands: Tarkett Benelux B.V. – Tel. +31 76 57 80 760 Norway: Tarkett AS – Tel. +47 32 20 92 00 Poland: Tarkett Wykładziny Sp. z o.o. – Tel. +48 22 639 31 66 Portugal: Tarkett SA – Tel. +351 21 427 64 20
Spain: Tarkett Floors S.L – Tel. +34 91 358 00 35 Sweden: Tarkett Sverige AB – Tel. +46 771 25 19 00 Switzerland: Tarkett Holding GmbH, Bereich Objekt Schweiz – Tel. +41 043 233 79 24 Turkey: Tarkett Aspen - Tel. +90 212 213 65 80
United Kingdom: Tarkett Ltd – Tel. +44 (0) 1622 854 040 ■ EASTERN EUROPE: Baltic States: Tarkett SAS - Tel. +370 37 262 220 Czech Republic: Tarkett SAS, org. slozka - Tel. +420-271 001 602 Hungary: Tarkett SAS - Tel. +36 1 437-8150
Russian Federation: Tarkett Russia–Tel. +7 4 95 777 69 83 Slovakia: Tarkett SAS - Tel. +421 34 774 12 09 ■ South East Europe: Tarkett Trade d.o.o. – Tel. +381 21 7557 649 (44) 569 12 21 Ukraine: Tarkett UA – Tel: +38 (0) 44 569 12 21
■ ASIA AND OCEANIA: Australia: Tarkett Australia Pty Ltd – Tel. +61 2 96 34 73 73 China: Tarkett Asia Pacific Limited Shanghai Representative Office – Tel. +86 (21) 60 95 68 38 Hong Kong: Tarkett Asia Pacific Ltd. – Tel. +852 2511 8716
India: Tarkett France (India Branch) - Tel. +91 11 4352 4073 Singapore: South East Asia: Tarkett Asia Pacifi c Ltd – Tel. +65 97 57 36 45 ■ AFRICA: Tarkett International: Tel. +33 1 41 20 41 01 ■ MIDDLE EAST: Tarkett Middle East:
Tel. +961 1 51 3363/4 Israël: Tarkett International: Tel. +33 1 41 20 41 01 ■ NORTH AMERICA: Tarkett Inc. USA: Tel. +1 713 869 5811 Johnsonite: Tel. +1 440 543 8916 ■ LATIN AMERICA: Brazil: Tarkett Fademac - Tel. 55 12 3954 7108
Tarkett America Latina: Tel. 55 12 39 54 7106 Argentina - Chile - Uruguay: Tarkett Latam Mercosur - Tel. 54 11 48 06 74 28 / 54 9 11 44 46 88 82 Colombia - Panama - Caribian: Tarkett Latam Andina - Tel. 57 1 759 5781 / 57 312 273 1566
Bolivia - Ecuador - Paraguay - Peru: Tarkett Latam Sur Oeste - Tel. 55 11 3047 7233 Mexico /Central America: Tarkett Latam Mexico - Tel. 52 735 35 63 918 / 52 55 51 07 9524
English - 1499362605 - 12/2015 - Printing: Altavia Paris RCS 323 790 956 - Conception:
Tarkett produces trend workbooks that analyse aspects of different indoor environments. Our Health Observer publishes
studies that show how colour and light impact moods and behaviour. A hospital can provide an atmosphere that is safe,
resistant to abrasion, heavy loads, electrostatic charges and the risk of infection, and that is also easy to clean and requires
minimal maintenance. Our recommendations accompany patients and hospital staff around the clock.

MADE FOR YOUR INSPIRATION

Transcription

Similar documents

deumidificatore comfee

azendi jewellers

Back On Black is proud to announce that 2010

made for your inspiration

made for your inspiration

Leeds Utd

Summer 2014 - Renue Systems

LINOSOM angl

Moduleo hits Hollyoaks

Why you should Tarkett Sommer?

2015 REGISTRATION DOCUMENT