Full Catalog - Raven Golf Clubs

Transcription

TM-4300
2007 PRODUCT CATALOG
Custom Golf Equipment
1-800-236-4566
Raven Tour Spec Series
TM-4300
1
1
1
1
Loft (RH)
9.0
xx
10.5
12.0
Loft (LH)
xx
10
xx
xx
Lie
59
59
59
59
Weight (gms)
185
185
185
185
Volume (CC)
410
410
410
410
Face HGT (mm)
58
58
58
58
Face Ang (deg)
0
0
0
0
WTM4300
j Driver has five weight ports and 12 interchangeable weights
2 each - .5 g, 1.5 g (Aluminum)
2 each - 3.0 g (Brass)
2 each - 4.0 g, 6.0 g, 8.0 g (Tungsten)
2 Screw Driver Keys
j The crown of the club is ultralite Beta-Ti for the lowest COG possible
and to maximize the COR to the legal limit. When combined with SP700 Beta Ti Face the performance is unmatched.
Full Screw Pack
Included!
j All head weights specified are measured without any removable
screws installed.
j The most consistent spin rates in the industry
Configuring your TM-4300 Driver
Configuring your driver is easy. The TM-4300 Tour Spec
Driver comes with 12 weights. By utilizing the different
weights you can customize your drivers swing weight as
well as the shot pattern. Switching weights from the heavier
to lighter can decrease the swing weight giving you the
ability to build a longer driver, using the heavier weights
means you can build a shorter driver and still maintain a
normal swing weight. By experimenting with the weighting
system of the TM-4300 you will be able to find the
combination that best fits you or your customers swing
characteristics.
The chart on the right shows different weighting for the TM4300. This is just a basic setup. Grip, shaft and length all
take part in the amount of weight you should add to the
head. If you have any questions regarding the weight set-up
for this driver please don’t hesitate to give us a call! We will
be more than happy to help you figure out what will work
best for you.
2
1-800-236-4566
-
The average driver head weighs 198 to 202 grams. The TM4300 weighs 185 grams without any weights added. 1 3/4
grams equals 1 swingweight. These weight plug configurations
will give you average swingweights at standard length.
8
.5
1.5
Low
Trajectory
.5
Draw Bias
.5
1.5
1.5
8
8
8
.5
8
High
Trajectory
1.5
4
8
8
3
Normal
Trajectory
1.5
.5
1.5
Fade Bias
.5
3
4
8
.5
www.ravengolfclubs.com
Raven Tour Spec Series
TM-4300-F
3
5
7
9
15
21
23
26
Lie
58.5
59.5
60
60
Weight
202
222
225
225
CC
202
160
160
160
Face Height (mm)
37
35
34
33
Face Ang (deg)
0
0
0
0
.335
.335
.335
.335
Loft (RH)
Hosel Bore
WTM43SS
j 3 wood head contains 5 weight ports
j 5 wood head contains 4 weight ports
j 7 and 9 woods contain 2 weight ports
j All head weights specified are measured without any removable
screws installed
j These heads do NOT come with a screw pack, however, the
screws from the included driver weight set are interchangeable
with the fairway woods
j All heads can be ordered by weight and bias
TS-102i
Loft RH
Lie (deg)
Offset (mm)
Weight (gms)
3
4
5
6
7
8
9
PW
21
58
0
242
24
59
0
249
27
60
0
256
31
61
0
263
35
61.5
0
270
39
62
0
277
43
62.5
0
285
47
63
0
292
The Tour Spec 102.i iron head is one of Raven's finest clubheads.
These heads are forged from 8620 soft carbon steel. The faces are
all CNC milled flat and the grooves are milled into the heads with
extreme precision. All are double nickel plated for a luxurious shine
and outstanding durability.
j Hand Forged from 8620 carbon steel
j Absolutely incredible feeling blades!
j The face is CNC milled flat to meet extremely tight
tolerances
j Every head comes in right on weight, loft, and lie spec every time!
j Each groove on the face is CNC milled in to allow precise
feedback from each shot
j CNC Milled grooves maximize spin on your approach shots
for the ultimate in ball control.
1-800-236-4566
-
3
Raven NearNet Forged
RM-201
3
4
5
6
7
8
9
PW
LOFT (deg) RH
21
24
27
31
34.5
38
42
46
SW
56
LIE (deg)
61
61.5
62
62.5
63
63.5
64
64.5
64.5
Offset (mm)
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
0.0
WGT (gms)
244
251
258
265
272
279
286
293
300
IRVMC
The RM-201 is an extremely versatile golf club. A low center of gravity
and undercut design assist you in hitting higher and longer golf shots.
NearNet Forged stainless steel give these clubs an incredibly soft feel
without sacrificing any of the forgiveness. This is a great design for a wide
range of golfers. Don’t miss out on the awesome feel of a forged club!
j
Perimeter weighted NearNet Forged heads
j
Low center of gravity makes for long and straight shots
j
Undercut back cavity helps with forgiveness
j
304 stainless steel
TM-102
LOFT (deg) RH
LOFT (deg) LH
LIE (deg)
Offset (mm)
WGT (gms)
2
3
4
5
6
7
8
9
PW
18
21
24
27
31
35
39
43
47
18
21
24
27
31
35
39
43
47
58
58
59
60
61
61.5
62
62.5
63
0
0
0
0
0
0
0
0
0
235
242
249
256
263
270
277
285
292
ITM102C
The Raven blades have been designed for maximum playability and
control. For better players, these clubs offer super soft NearNet forged
stainless steel and smaller head size. The higher center of gravity and
evenly distributed weight make it extremely easy to work your shots in
any way you see fit. This is the ultimate players club!
j
Full blade design Non-offset
j
The ultimate in “feel”
j
Available in right and left hand dexterity
j
Traditional size and shape make this a time-less design
4
1-800-236-4566
-
Raven NearNet Forged
TM-303i
LOFT (deg) LH
LIE (deg)
3
4
5
6
7
8
9
PW
SW
20
22
25
28
32
36
40
44
54
58
59
60
61
62
63
64
64
64.5
Offset (mm)
4.25
4
3.75
3.5
3.25
3.0
2.75
2.5
2.2
WGT (gms)
242
249
256
263
270
277
284
286
290
ITM303C
It’s your turn lefties! We only offer this NearNet forged cavity
back iron in Left Handed. The set is “de-lofted” for a tour
trajectory and longer distance. A high polish chrome finish add’s
luxurious shine and great durability.
j
Available only in LEFT HANDED
j
Face thickness of .200 in.
Left
Hand
Only
j
Mirror finish
j
Oversized forged head
j
This set is de-lofted for a lower and longer ball flight
NearNet Wedges
LOFT (deg) RH
LOFT (deg) LH
LIE (deg)
Bounce (deg)
WGT (gms)
AW
AW
SW
SW
SW
LW
50
xx
64
6.0
305
52
52
64
8.0
305
54
xx
64
8.0
305
56
56
64
12.0
305
58
xx
64
8.0
305
60
60
64
4.0
305
INN(XX)
j
Satin wedges are made from 8630 carbon steel
j
Raw wedges are made from 8620 carbon steel
j
Four way chamfer in the sole for the ultimate in shot making
j
Extremely soft material gives outstanding feel
j
Right hand available in raw, and satin finishes
j
Left hand available in raw and satin
1-800-236-4566
-
5
Raven Cast Series
Raven MVF
3
4
5
6
7
8
9
PW
SW
AW
LW
Loft (deg) RH
21
23.5
26
29
33
38
42
47
50
56
60
Lie (deg)
60
60.5
61.5
62
62.5
63.5
64
65
65
65
65
Offset (mm)
7
6
5
4
3
2
1
0
0
0
0
Weight (gms)
242
249
256
263
270
277
284
291
296
300
302
IRHMVF
The MVF iron from Raven offers solid playability. It is easy to hit far and straight
from any lie. A progressive offset design helps to improve accuracy where you
need it most - the longer irons. A traditionally sized head is great for those who
like the appearance of a smaller club design. The MVF’s have a luxourious high
polish finish and a high tech “carbon fiber” medallion in the back. Raven’s own
foam backed insert helps to eliminate vibrations on most shots.
j
One of 2006’s best sellers!
j
Low center of gravity for higher and straighter shots
j
Foam backed medallion for vibration dampening
j
Can be bent for custom loft and lie angles up to 2 degrees.
Raven Undercut
Loft (deg) RH
Lie (deg)
2
3
4
5
17
60.5
6
7
19
22
61
61.5
8
9
25
28
62
62.5
PW
32
36
40
44
63
63.5
64
64.5
AW
SW
LW
49
54
58
64.5
64.5
65
Offset (mm)
4.5
4.0
3.5
3.0
2.5
2.0
1.2
1.0
1.0
1.0
1.0
1.0
Weight (gms)
235
244
251
258
265
272
279
286
293
296
300
303
IRVUC
The Raven Undercut is one of our finest cast irons. This club can be played
by any player - from beginner to advanced. These clubs are slightly delofted for extra distance but the super low center of gravity keeps the ball
flight nice and high. The undercut design and perimeter weighting make it
easy to hit higher and straighter shots.
j
One of 2006’s best sellers!
j
Undercut sole makes an extremely forgiving head
j
Perimeter weighting gives a great feel throughout the set
j
Slightly oversized clubhead
j
Can be bent for custom loft and lie angles up to 2 degrees
6
1-800-236-4566
-
Raven Cast Series
E X- 1 6 0 i
2
3
4
5
6
7
8
9
PW
AW
SW
LW
Loft (deg) RH
18
21
24
27
30
34
38
42
46
50
54
60
Loft (deg) LH
xx
21
24
27
30
34
38
42
46
xx
54
xx
58.5
59
60
60.5
61
62.5
63.5
64.5
65
65
65
65
6
6
5.5
5
4.5
4
3.5
3
2.5
2
2
2
236
244
251
258
265
272
279
286
293
296
300
302
Lie (deg)
Offset (mm)
Weight (gms)
IEX160
The EX-160i has been with us for years now. It's timeless design
is great for beginner and amateur golfers. A large, thick sole
keeps the center of gravity as low as possible making it easy to
get the ball airborne and in the fairway. The durable satin finish
make them extremely long lasting.
j
The ultimate in game improvement
j
Super low center of gravity for higher, longer shots
j
Fat bottom sole design makes these our easiest to hit golf
clubs
j
Can be bent for custom loft and lie angles up to 2 degrees
Sapphire 501
3
4
5
6
7
8
9
PW
UW
SW
LW
LOFT (deg) RH
21
24
27
30.5
34
38.5
42.5
47
50
54
58
LOFT (deg) LH
21
24
27
30.6
35
38.6
42.6
47
xx
54
xx
LIE (deg)
59
60
61
62
63
63.5
64
64.5
64.5
65
65
Offset (mm)
7.5
7
6
5
4
3
2
2
2
2
2
WGT (gms)
242
249
256
263
270
277
284
291
295
298
302
IRVSF501
Our newest offering is the Sapphire 501. A shallower face and
longer blade length increase the hittable area on these club heads.
An extremely durable sandblasted finish give the Sapphire's a long
life. A wide sole and perimeter weighting create maximum
forgiveness and a high ball flight. This is a great club for beginners
and amateurs!
j
Low center of gravity and perimeter weighting make these
clubs extremely easy to hit
j
Super durable tumbled finish lets these clubs look great for
years to come
j
Matches perfectly to the Sapphire drivers, fairway woods,
and hybrids
1-800-236-4566
-
7
Raven Cast Series
R a v e n M i l l e d Fa c e
The Raven Milled Face has just
that - a milled face. The deep
CNC milled grooves create
massive amounts of backspin! A
slightly smaller size and sharper
leading edge let you power
through any kind of turf. This
series of wedges offers the
maximum spin available in any of
our wedges.
Loft (deg) RH
SW
LW
55
60
Lie (deg)
64
64
Bounce (deg)
8.5
5.0
Weight (gms)
305
305
IRHM
j
Smaller stainless steel head
j
CNC milled to .001in. to create 1000’s of
micro-grooves for added spin and feel
j
GREAT for Laser engraving!
j
Right Hand Only
R a v e n H. P.
AW
SW
LW
Loft (deg) RH
52
56
60
Loft (deg) LH
52
56
60
Lie (deg)
65
65
65
Bounce (deg)
7.0
12.0
3.0
Weight (gms)
300
305
305
The High Polish wedges have a very classic
design. They are modeled after many of the
wedges that have been around for years. A
cast stainless steel is durable enough to stand
up to all of golfs playing conditions but soft
enough to produce great response around
the greens! This is a very forgiving wedge!
IRSW
j
Classic wedge design
j
431 stainless steel can be bent for custom loft and lie angles up to 3
degrees
j
This is our best wedge for engraving purposes due to it’s large flat blade
R a v e n Po l y m e r
The Polymer Insert wedges contain
PW AW SW LW LW
just that - a polymer insert. This
48
52
56
60
64
Loft (deg) RH
creates the softest face possible in
65
65
65
65
65
Lie (deg)
a wedge. With a soft face the ball
5.0
6.0
9.0
6.0
3.0
Bounce (deg)
has more time to absorb the spin
305
305
305
305
305
Weight (gms)
the club is producing. On top of
that - these faces are milled for
IPOL
extra roughness. It's hard to find a
wedge that will produce more
j
Milled polymer face gives a much softer feel than
spin than these! Impress your
steel
friends by backing the ball up to j
Oversized wedge head
the hole with ease!
8
1-800-236-4566
-
Raven Sapphire
Sapphire 501D
&
501-F
1
1
1
3
5
7
9.5
10.5
12.0
15
18
21
Loft (LH)
xx
10.5
12.0
15
18
21
Lie
58
58
58
58
58
58
Weight
198
198
198
210
218
225
Volume (CC)
460
460
460
Face Height (mm)
60
60
60
Face Ang (deg)
-1
-1
-1
0
0
0
.335
.335
.335
.335
.335
.335
Loft (RH)
Hosel Bore
WRVSF
WRVST
The Sapphire 501-D is Raven's first 460 CC head. It has been created with
premium SP-700 titanium to push the COR limit to the max. The massive sweet
spot on this head makes it extremely forgiving and easy to hit. This is a great
club for all players. The rich black crown matches well with all shafts, while
the eye catching blue designs and sleek high polish sole is sure to catch the
attention and curiosity of the rest of your foursome!
The Sapphire Fairway woods are a great match to your Sapphire 460 cc
driver. They are a slightly oversized fairway wood head with a lower profile.
They have a flat, smooth sole to easily get the ball out of hazardous areas.
j
Awesome performance pushes the COR to the limit - .827
j
Deep red paint finish
j
True pear shape
j
Variable face technology for extreme distance
j
Smallest of the three RedHeads at 300 CC
Sapphire 501-H
2
3
4
5
Loft (RH)
16
19
22
25
Lie
59
59.5
60
60.5
Weight (gms)
232
237
242
247
0
0
0
0
.370
.370
.370
.370
Face Ang (deg)
Hosel Bore
IRVSHB
The Sapphire 501-H is Raven's newest hybrid. This one was designed to
directly replace your lower irons. The benefit of using a hybrid iron like the
Sapphire 501-H is that with these clubs it now becomes extremely easy to
get the lower irons airborne! No more low, rolling shots from your low
irons. No need to worry about accuracy either! These clubs have it all!
j
Perfectly weighted to replace your respective irons
j
Matches perfectly to all of the Sapphire Series
j
No more worries about getting your low irons airborne!
1-800-236-4566
-
9
New for 2007
Raven Squared
1
1
10.5
12.0
Lie
58
58
Weight
198
198
Volume (CC)
460
460
Face Height (mm)
60
60
Face Ang (deg)
-1
-1
.335
.335
Loft (RH)
Hosel Bore
WRVSQ
New for 2007 is the Raven Squared! It is Raven’s first ever “square”
driver. Square drivers are the newest thing in MOI fitting. With the
weight of the club offset at the corners this club creates an extremely
low side spin rate. It’s hard to hit this driver anything but straight. A large
460 cc size helps create a massive sweet spot and amazing forgiveness.
The premium Beta-Ti face is a necessity for a club of this size and shape.
j
New for 2007
j
Raven’s first square headed driver!
j
Great for players who want to hit nothing but straight shots
j
Rich black color and high polished sole
Raven Emerald 601-D
Loft (RH)
1
1
10.5
12.0
Lie
58
58
Weight
198
198
Volume (CC)
460
460
Face Height (mm)
60
60
Face Ang (deg)
-1
-1
.335
.335
Hosel Bore
WEXEM
The Emerald driver is another new 460 cc design from Raven Golf.
It offers an incredibly light top crown to lower the center of
gravity beyond a typical 460 cc driver. A simple design and great
shape makes this a great option for the traditionalist. No bells and
whistles. Just pure performance!
j
First super light weight crown driver from Raven
j
460 CC in size
j
Simple and elegant design
10
1-800-236-4566
-
Raven RedHeads
R a v e n R e d H e a d T M - Pr o
Loft
1
1
9.0
10.5
Lie
55
55
Weight (gms)
203
203
Volume (CC)
300
300
Face Height (mm)
55
55
Face Ang (deg)
Hosel Bore
0
0
.335
.335
WTMPRO
The TM-Pro titanium version is the smallest of the three RedHeads. It is a mere
300 cc's but it packs a big punch. The head was designed with low
handicappers in mind. A true "pear shape" design gives this club the most
workability of the three RedHead options. The smaller, more compact face
delivers an outstanding feel with every shot. If accuracy is your game then this
may be the right option for you.
j
Awesome performance pushes the COR to the limit - .827
j
j
True pear shape
j
Variable face technology for extreme distance
j
Smallest of the three RedHeads at 300 CC
R a v e n R e d H e a d T M - Pr o I I
1
3
5
7
9
Loft (RH)
10.5
15
18
21
24
Loft (LH)
xx
15
18
21
xx
Lie
56
57
57
58
58
Weight (gms)
202
212
222
228
233
Face Height (mm)
42
38
36
34
34
Face Ang (deg)
0
0
0
0
0
.335
.335
.335
.335
.335
Hosel Bore
WTMP2
The TM-Pro II stainless steel driver is our largest stainless driver option. It is
great for beginners and kids or anyone looking for a smaller driver head
option. Stainless steel has it's own unique feel, however it cannot be made
as large as the new titanium heads so it has fallen into the cracks. You can't
get the feel of stainless steel with titanium and the price can't be beat!
j
Made of 15-5 stainless steel
j
Polished face and sole
j
Deep red color
j
Great traditionally sized fairway wood head
1-800-236-4566
-
11
Raven RedHeads
TM-7002
8.5
xx
10.5
11.5
Loft (LH)
xx
Lie
56
9.5
xx
11.0
56
56
56
Weight (gms)
200
200
200
200
350
356
350
Volume (CC)
350
Loft (RH)
Face Height (mm)
56
56
56
56
Face Ang (deg)
-1.0
-1.1
-1.0
-1.0
Hosel Bore
.335
.335
.335
.335
WTM7002
The TM-7002 is our mid-sized RedHead. It is a 350 cc SP-700
titanium head. This particular titanium is the best golf has to offer!
This is a great club for those who aren't too fond of the large 460
cc sized heads of today. It offers a more traditional size and shape.
Don't be fooled by its smaller size though, the TM-7002 still has a
huge sweet spot! A deep red paint finish and high polished sole
give this model a very classy look.
j
j
No foam fill for maximum feel
j
12 degree bulge and 12 degree roll
j
Our mid-sized RedHead - 350 CC
j
Pushes the COR limit to the max
TM-7002-F
Loft (RH)
3
5
7
9
15
18
21
24
Lie
58
58
58
58
Weight (gms)
210
220
225
230
Face Height (mm)
38
37
36
35
Face Ang (deg)
-1
-1
-1
-1
0.335
0.335
0.335
0.335
Hosel Bore
WTM7SS
The TM-7002 Fairway woods are a perfect match to the TM-7002
Driver. The matching deep red finish and polished sole add to the
great styling of this series. A slightly larger club head and lower
profile design make it easy to get the ball airborne off any terrain.
j
15-5 heat treated stainless steel
j
Larger design creates a larger sweet spot
j
230 cc 3 wood head
j
Satin face for extra durability
12
1-800-236-4566
-
Raven RedHeads
TM-4000
HI-LOFT
1
1
1
1
Loft (RH)
7.5
9.0
10.5
12.0
13.5
15.0
Lie
54
54
54
54
54
54
Weight (gms)
202
202
202
202
202
202
Volume (CC)
400
400
400
400
400
400
Facen Height (mm)
54
54
54
54
54
54
-1.0
-1.0
-1.1
.335
.335
.335
Face Ang (deg)
-1.0
-1.0
-1.0
Hosel Bore
.335
.335
.335
WTM400
The Raven TM-4000 titanium driver is an outstanding option for all caliber
players. The TM-4000 is forged from SP-700 titanium. This is the best golf
related titanium on the market today! The 400 cc size gives this club a huge
sweet spot. A deep red paint finish and high-polish / sandblasted sole create
a very classy golf club. Don't let your buddies out-drive you anymore!
j
Extremely high COR level, but still USGA legal
j
NearNet forging process for the ultimate in playability and distance
j
”HI LOFT” series does not contain a loft on the bottom of the head
j
Milled variable face for a great trampoline effect
j
10 degree bulge, 10 degree roll
j
The largest of the RedHeads at 400 CC
RedHead Hybrid
2
3
4
5
17
20
23
26
LIE
58.5
59
59.5
60
WGT (gms)
228
233
238
243
0
0
0
0
.335
.335
.335
.335
LOFT (RH)
Face Ang (deg)
Hosel Bore
WRVHB
The Raven RedHead Hybrid is our most popular hybrid model. It has an
extremely low center of gravity to get the ball airborne easily out of any lie.
These clubs are played just an inch shorter than a typical fairway wood.
This produces amazing accuracy without sacrificing much distance. These
are great clubs to have in your bag! !
j
Perfect hybrid option to match all of the RedHeads
j
15-5 stainless steel gives a solid feel
j
Low center of gravity gets the ball in the air fast
j
Satin face for longer durability
j
Perfectly replaces hard to hit fairway woods
1-800-236-4566
-
13
Raven RedHeads
T M - Pr o O f f s e t
1
1
1
Loft (RH)
9.5
10.5
12.0
Lie
56
56
56
Weight (gms)
200
200
200
Volume (CC)
360
360
360
Face Height (mm)
54
54
54
Face Ang (deg)
-1.0
-1.0
-1.0
Hosel Bore
.335
.335
.335
WTMPO
The TM-Pro offset model was designed for those of you that constantly
fight a slice. The slight offset in the hosel gives you a split second longer
to square up your club face before impact. This head is made of 10-2-3
Beta Titanium. A Beta Titanium offers more strength and durability than a
standard titanium. Keep the ball in the fairway with Raven's largest offset
model!
j
j
Made of 10-2-3 Beta Titanium
j
Offset helps to cure the slice
j
Our largest offset head
T M - Pr o O f f s e t F
Loft (RH)
3
5
7
9
15
19
22
24
Lie
58
58
58
58
Weight (gms)
210
220
224
230
Volume (CC)
180
160
140
135
Face Height (mm)
40
37
35
34
Face Ang (deg)
Hosel Bore
0
0
0
0
0.335
0.335
0.335
0.335
WTMPOF
.The TM-Pro Offset is a great option for anyone with a slicing
problem. They match up perfectly to the TM-Pro Offset titanium
driver. This is Raven's only offset fairway wood! With that extra
split second to square up your club face you will see straighter,
longer shots. These also have the deep red paint finish and a high
polish sole that is common with our RedHead series!
j
15-5 heat treated stainless steel
j
Offset design helps cure a slice
j
Polished sole and face
14
1-800-236-4566
-
Extreme Distance
Standard
The Extreme Distance Series offers 3 different
size driver heads. The 220 CC model is the
smallest. This club is for the traditionalist. It is a
typical size and shape of clubs from the past.
However, it offers a titanium face for more
distance than anything made before it! This
model is made for accuracy and workability
because of the small size.
Loft (RH)
1
1
1
8.5
9.5
10.5
Lie
56
56
56
Weight (gms)
204
204
204
Volume (CC)
220
220
220
Face Height (mm)
39
39
39
Face Ang (deg)
Hosel Bore
0
0
0
.335
.335
.335
WEX450
Mid-Size
The 250 CC model is the mid-size
option. Slightly larger than the 220 CC
head in all areas. They look almost the
same but the 250 CC model offers a
deeper face. This creates a larger sweet
spot for more forgiveness. A great club
for all types of players who don't like
the huge driver heads in today’s
marketplace.
Loft (RH)
1
1
1
1
8.5
9.5
10.5
12.0
Lie
56
56
56
56
Weight (gms)
202
202
202
204
Volume (CC)
250
250
250
250
Face Height (mm)
45
45
45
45
Face Ang (deg)
Hosel Bore
0
0
0
0
.335
.335
.335
.335
WEX450M
Jumbo
1
The 280 CC model is the largest. A titanium face and larger
size head offer great response and a ton of forgiveness. It
may be the largest of this series but it is still considerably
smaller than the typical 460 cc heads you'll find today. This
is great for those who like to keep it simple with a no
nonsense long distance driver. It will be hard to find a
traditional sized driver with this kind of length!
10.0
Loft (RH)
Lie
56
Weight (gms)
204
Volume (CC)
280
Face Height (mm)
42
Face Ang (deg)
-1
.335
Hosel Bore
WEX450J
The Extreme Distance 450i fairway
woods are some of Raven's best. This
model has been around for years
becuase of its solid construction,
amazing feel, and super long distance.
A titanium face is molded into a
stainless steel body. The hot face
launches the ball further than most
fairway woods and the titanium
construction produces an unexpected
feel and sound. A deep black finish lets
these clubs match well to any set. No
need to be flashy when you're hitting
par fives in two!
1-800-236-4566
-
Fa i r w a y
3
4
5
7
Loft (RH)
15
19
21
24
Lie
57
57
58
58
Weight (gms)
212
218
222
225
Volume (CC)
140
130
120
115
Face Height (mm)
36
34
34
32
Face Ang (deg)
0
0
0
0
.335
.335
.335
.335
Hosel Bore
WEX450
15
Putter Series
Sapphire
Loft (deg) RH
3.0
Loft (deg) LH
3.0
Lie (deg)
90
Weight (gms)
385
Shaft Type
Engrave-able?
MALLET
YES
PTEXSAF
The EX-Sapphire putter is the perfect match to our entire Excelsior
Sapphire Series. The blue polymer insert face gives great response
and feel. The mallet style and perimeter weight distribution create a
very forgiving putter.
j
USGA conforming polymer insert
j
431 stainless steel body
j
90 degree hosel bore
j
Can be engraved into the soft polymer insert
j
Mallet or single bend shaft compatible
Sapphire P2G
Loft (deg) RH
3.0
Lie (deg)
90
Weight (gms)
380
Shaft Type
MALLET
Engrave-able?
YES
PTP2G
The EX-Sapphire P2G putter is another the perfect match to
our entire Excelsior Sapphire Series. The blue polymer insert
face gives great response and feel. The mallet style and
perimeter weight distribution create a very forgiving putter. This
very unique design with a blue polymer "ball" and sight line on
the top help to align your putts.
j
j
j
j
j
4-color logos are possible! (See Inset)
16
1-800-236-4566
-
Putter Series
Arrow
Loft (deg) RH
3.0
Lie (deg)
90
Weight (gms)
395
Shaft Type
Engrave-able?
MALLET
YES
PTEXAR
The EX-Arrow is another new putter option from Raven Golf.
The top arrows help to line the ball up to your target. A mallet
style and perimeter weighting along with the polymer insert
face give a forgiving feel.
j
j
j
j
j
E X- 3
Loft (deg) RH
3.0
Loft (deg) LH
3.0
Lie (deg)
90
Weight (gms)
351
Shaft Type
MALLET
Engrave-able?
YES
PTEX3
The EX-3 has been one of Raven's most popular putters.
The heavy head and the great "3-ball" design bump this
putter up a notch. A soft polymer face gives it a great
response and makes distance control a breeze. The
heavy weight lets the club act like a pendulum and keeps
the face square and on-line. The 3 progressively smaller
"balls" on the top help you to easily line the putter up
square to your line.
j
j
j
4-Color logos are possible! Can also be engraved
into the soft polymer insert
j
1-800-236-4566
-
17
Putter Series
TM-45
Loft (deg) RH
3.0
Lie (deg)
90
Weight (gms)
380
Shaft Type
Engrave-able?
MALLET
YES
PTTM45
The TM-45 putter is one of Raven's largest mallet style options. With
the large "horseshoe" shaped back the weight is distributed more
to the perimeter than most mallet putters. This offers a smooth
steady feel through every stroke. A "mallet" bend shaft is
recommended for the head to create a no-offset design. The face
and shaft are lined up perfectly!
j
Heavy mallet design for a great feel
j
431 stainless steel for long durability
j
Can be laser engraved on the face
TM-65
Loft (deg) RH
4.0
Loft (deg) LH
4.0
Lie (deg)
72
Weight (gms)
330
Shaft Type
STRAIGHT
Engrave-able?
YES
PTTM65
The TM-65 putter is one of Raven's longest lasting models. The
simple heel / toe weighted design make this putter great for all
types of players from beginner to advanced. This is our best
option for engraving purposes. Both the face and sole of the
club can be laser engraved!
j
Long offset hosel
j
431 stainless steel for great durability
j
Our finest model for laser engraving
18
1-800-236-4566
-
Putter Series
E X- 4
Loft (deg) RH
3.0
Lie (deg)
73
Weight (gms)
351
Shaft Type
STRAIGHT
Engrave-able?
YES
PTEX4
The EX-4 is Raven's center shafted option. It is a standard
size and slightly heel / toe weighted design. A black milled
polymer face give this putter a super soft feel. Players with a
strong eye dominancy will enjoy a putter of this style. This is
a great center shafted option!
j
j
Two way milled face
j
Great for players with a strong eye dominancy
j
Can be engraved in the polymer insert
TM-80
Loft (deg) RH
3.0
Lie (deg)
72
Weight (gms)
325
Shaft Type
MALLET
Engrave-able?
YES
PTTM80
The TM-80 putter is made of 100 percent milled
brass. The brass creates an amazingly soft feel
without any type of insert. Brass material is also
very heavy. This gives this smaller headed putter a
great pendulum effect.
j
Heel / Toe weighted design
j
100% milled brass
j
The face and sole are laser engrave-able
j
1-800-236-4566
-
19
Optiflight Technology
How do our shafts compare?
Learn more about the quality and consistency below...
Curvature Matching
Consistency in steel shafts is comprised of two main components: specifications and bend profile. Shafts with similar specifications are
generally thought to be consistent with one another. But to be truly uniform, those two shafts must also bend in the same manner.
More than just “kick-point,” shafts need to have exactly the same bend profile along the entire shaft to be considered consistent with each
other. For example, hanging a five pound weight from the end of two shafts with identical specs may cause the ends of both to bend
three inches.
These shafts, however, are not necessarily consistent with one another as they might be bending in different places along the lengths of the
shafts. Multiple tests with a curvature adapted deflection board have shown that these steel shafts have bend profiles that are consistent
within a model line. This creates and unprecedented uniformity in the curvature matched shafts.
Inconsistent Bend Profile
3 IN
Consistent Bend Profile
3 IN
Because a shaft’s bend profile relates directly to what a golfer feels when swinging the club, shafts with a consistent bend profile will feel
the same and impart consistent ball flight patterns from club to club. With the kind of consistent feel in curvature matched shafts, the golfer
will be able to spend more time perfecting his/her swing without having to worry about variations occurring within the shafts themselves.
OptiFlight Technology
This technology is related to a shafts’ tip angle at impact, which interconnects with the bend profile. OptiFlight technology, however,
creates consistency in a different way than does Curvature Matching.
A shaft’s tip angle at impact directly affects ball flight patterns, including launch angle and distance. The change in tip angle at impact from
club to club affects how consistently the ball flight changes; and whether the distance the ball flies is appropriate for the iron used.
OptiFlighted shafts are engineered to have consistent tip angle changes from iron to iron, creating both incremental changes in ball launch
angles and optimal flight distances for each iron. These shafts correct the problem most golfers face when they attempt to use each iron in
their sets to achieve a desired ball flight distance, and are unable to do so.
For example, it is not uncommon for some golfers to hit balls the same distance using both a 5 iron and a 6 iron (from the same set).
Typically, the 6 iron head is designed with more loft than the 5 iron head, but the shafts’ tip angle at impact may not change in the correct
increment to allow the head to do its job. Other similar examples occur more often than not. OptiFlighted shafts alleviate this problem by
providing the correct incremental “gap” between irons..
Inconsistently incremented irons
Correctly incremented irons
Feel
The
Difference
20
1-800-236-4566
-
Excelsior Steel Series
E celsior
The NEW Excelsior steel shafts have the ability to revolutionize your game. With two stepped shafts and a stepless option to
choose from, your playing partners better watch their backs. These shafts have very high tolerances to ensure a perfect set of
clubs every time. All of our shafts are extremely comparable to name brand shafts at a fraction of the cost. Advanced Optiflight
Technology is incorporated into this new series for amazing shaft consistency and superb response from shot to shot.
Flex
E celsior
RCSTPLI Iron
Platinum - Lite
RCSTPLW
E celsior
Wood
E celsior
Platinum-UL
Tip
Dia.
Parallel
Butt Dia.
# of
Steps
Flex Pt.
R/S
41
120
0.370
12.8
0.600
12
Mid/High
A/L
40
115
0.370
12.8
0.580
12
Mid
R/S
46
115
0.335
12.0
0.600
12
Mid/High
Flex
RCSTPU
Iron
R/S
Length
Weight
Tip
Tip
(in)
(gms)
Dia.
Parallel
41
100
0.370
9
Butt Dia.
0.600
# of
Steps
Flex Pt.
20
Mid
j
The Platinum-UL is our lightest weight steel shaft, weighing just 100 grams.
E celsior
With a center of gravity slightly closer to the butt, the Platinum UL snaps
through at the end of the swing to impart the highest downswing acceleration
and ball trajectory of any of our premium shafts. This shaft is great for the high
handicap golfer that prefers the lightweight, softer feel of graphite; but wants
to move into steel for the consistency and solid feel it provides.
Platinum-SL
Custom Made
E celsior
Length
Weight
Tip
Tip
(in)
(gms)
Dia.
Parallel
A/R
41
124
0.370
8
0.600
0
Mid
S/X
41
117
0.370
8.5
0.600
0
Mid
A/S
46
115
0.335
8
0.600
0
Mid
n/a
37
120
0.370
12
0.600
0
n/a
Flex
RCSTPSLI Iron
Platinum-SL
Custom Made
Tip
(gms)
weight shaft imparts a slightly higher ball trajectory and increased downswing
acceleration than the Platinum. The Platinum Lites’ high torsional stiffness,
however, balances its downswing acceleration with ball control by not
allowing the shaft to twist under torque. This engineering minimizes left/right
dispersion and allows for improved accuracy, especially with oversize heads.
The Platinum Lite is unsurpassed in “taming” oversize irons.
Custom Made
Platinum-SL
Weight
(in)
j
The Platinum Lite is designed with the mid-handicapper in mind. The light
Platinum-SL
E celsior
Length
RCSTPSLW
Wood
RCSTPSLP Putter
Butt Dia.
# of
Steps
Flex Pt.
j
The Platinum SL is designed for the golfer with a low handicap. It provides the
lowest trajectory shots of any of our premium shafts. The shaft, however,
incorporates a sleek, stepless design which transfers stress more evenly
throughout the shaft during the downswing, thereby providing the golfer with
an unparalleled swing consistency and control.
j
A new S/X combination shaft is now available. This shaft is a super light
weight stepless steel with the ability to produce longer and stiffer clubs.
1-800-236-4566
-
21
Excelsior Graphite Series
The Excelsior Series shafts have been specially designed by Raven Golf for ultimate performance. Three different weights and many
different torque specifications give this line great diversity. They make it possible for us to fit just about any playing style.
Pe a r l
Length
Wgt
Torque
Tip
Butt
(in)
(gms)
(deg)
Dia.
Dia.
Pt.
L (501)
46
50
5.0
0.335
0.600
Low
A (502)
46
50
5.0
0.335
0.600
Low
R (503)
46
50
5.0
0.335
0.600
Low
Flex
Woods
j
An Ultralite weight shaft with a low bend profile
j
Possesses a lively tip for long high ball flight
j
All filament wound by super accurate CNC driven machinery guaranteeing shaft to shaft consistency
j
Lightest filament wound shaft on the market!
Bend
EXPW
Emerald
Length
Wgt
Torque
Tip
Butt
Bend
(in)
(gms)
(deg)
Dia.
Dia.
Pt.
R (653)
46
65
2.8
0.335
0.630
Mid/High
S (654)
46
65
2.8
0.335
0.630
Mid/High
Flex
Woods
EXEW
j
Super low torque filament wound shaft
j
Great for a tour trajectory
j
Emerald green color lets them match well with many heads, especially our new Emerald driver
j
6” parallel tip is great for customization
Sapphire
Flex
Woods
Length
Wgt
Torque
Tip
Butt
Bend
(in)
(gms)
(deg)
Dia.
Dia.
Pt.
L (651)
46
64
3.0
0.335
0.600
Mid
A (652)
46
64
3.0
0.335
0.600
Mid
R (653)
46
64
3.0
0.335
0.600
Mid
S (654)
46
64
3.0
0.335
0.600
Mid
EXSW
j
The Sapphire shaft is designed for the oversized heads of today. The combination of low torque
and a mid bend profile make it one of the longest shafts on the market
j
Black Diamond
Length
Wgt
Torque
Tip
Butt
(in)
(gms)
(deg)
Dia.
Dia.
Pt.
L (751)
46
75
3.5
0.335
0.600
Mid/Low
A (752)
46
75
3.5
0.335
0.600
Mid/Low
R (753)
46
75
3.5
0.335
0.600
Mid/Low
S (574)
46
75
3.5
0.335
0.600
Mid/Low
Flex
j
The Black Diamond is the first
shaft we developed using the
Vector Launch Monitor in our
Fitting Center. It was designed
to maximize all launch
characteristics for today’s
woods and irons.
Woods
Irons
L (751)
40
75
3.0
0.370
0.600
Mid/Low
A (752)
40
75
3.0
0.370
0.600
Mid/Low
R (753)
40
75
3.0
0.370
0.600
Mid/Low
S (754)
40
75
3.0
0.370
0.600
j
j
2006 proved this to be our most popular graphite shaft!
22
1-800-236-4566
-
Bend
Mid/Low
EXBDW
EXBDI
Raven Graphite Series
Raven has always offered it’s own line of graphite shafts. These shafts have made changes through the years to keep with the
technology of today. Now all of our Raven Graphite is Filament Wound for much tighter tolerances and better control. A variety of
different shaft options, colors, and performance let you match any of our drivers with ease.
R a v e n Lo w To r q u e
Torque
Length
Weight
Raw Freq
Tip
(deg)
(in)
(gms)
(CPM)
Par.
S/X
4.50
46
81
245
6.5"
R/S
4.50
46
78
235
6.5"
L/A
4.50
46
76
225
6.5"
S/X
4.00
41
74
285
5.0"
R/S
4.00
41
72
275
5.0"
L/A
4.00
41
70
265
5.0"
Flex
Wood
Iron
The Raven Low Torque is an outstanding price point option. Both wood and iron shafts are designed to work together to create a very
consistent graphite set-up. A metallic black paint finish on the R/S shafts lets these shafts match well to any brand of golf club. A
champaign color in the A/L shafts is a great option for ladies. The Raven Low Torque is a solid shaft option for many different players
from juniors to advanced golfers. Great value and excellent quality.
Platinum Extreme
Flex
Wood
Iron
Torque
Length
Weight
Raw Freq
Tip
(deg)
(in)
(gms)
(CPM)
Par.
R/S
3.50
46
86
245
5.5"
A/L
3.50
46
86
225
5.5"
R/S
2.80
41
85
295
5.0"
A/L
2.80
41
85
275
5.0"
The Platinum Extreme is one of Raven’s most stable shaft options. A tightly wound filament shaft and mid-weight create a feel unlike any
of our other shafts. The very low torque iron shaft creates accuracy only seen in most steel shafts. With the “steel-like” silver paint and
steel shaft accuracy fused with graphite shaft weight we have created a shaft rarely seen in today’s golf market.
CPM FIT
Flex
Wood
Torque
Length
Weight
Raw Freq
Tip
(deg)
(in)
(gms)
(CPM)
Par.
S
3.50
46
67
240
4.0"
R
3.50
46
67
230
4.0"
A
3.50
46
67
220
4.0"
Like the Platinum Extreme, the CPM FIT shaft is tightly filament wound. It offers a lighter weight with a little more torque in the iron shafts.
The lighter weight helps you generate more clubhead speed without much effort. A rich burgundy color is a perfect match to our
RedHead Series along with many other club options out there on the market.
1-800-236-4566
-
23
Shaft Trimming Instructions
G r a p h i t e I r o n S h a f t Tr i m m i n g I n s t r u c t i o n s
Iron Number
Pre-Flexed
Combo R/S for R Flex
Combo R/S for S Flex
Combo A/L for L Flex
Combo A/L for A Flex
1
2
3
4
5
6
7
8
9
PW
SW
0"
0"
2.0"
0"
2.0"
0"
0"
2.0"
0"
2.0"
.25"
.25"
2.25"
.25"
2.25"
.50"
.50"
2.5"
.50"
2.5"
.75"
.75"
2.75"
.75"
2.75"
1.0"
1.0"
3.0"
1.0"
3.0"
1.25"
1.25"
3.25"
1.25"
3.25"
1.50"
1.50"
3.50"
1.50"
3.50"
1.75"
1.75"
3.75"
1.75"
3.75"
2.0"
2.0"
4.0"
2.0"
4.0"
2.25"
2.25"
4.25"
2.25"
4.25"
S t e e l I r o n S h a f t Tr i m m i n g I n s t r u c t i o n s
Iron Number
Pre-Flexed
1
2
3
4
5
6
7
8
9
PW
SW
0"
0"
2.0"
0"
2.0"
0"
0"
2.0"
0"
2.0"
.5"
.5"
2.5"
.5"
2.5"
1.0"
1.0"
3.0"
1.0"
3.0"
1.5"
1.5"
3.5"
1.5"
3.5"
2.0"
2.0"
4.0"
2.0"
4.0"
2.5"
2.5"
4.5"
2.5"
4.5"
3.0"
3.0"
5.0"
3.0"
5.0"
3.5"
3.5"
5.5"
3.5"
5.5"
4.0"
4.0"
6.0"
4.0"
6.0"
4.5"
4.5"
6.5"
4.5"
6.5"
S t e e l W o o d S h a f t Tr i m m i n g I n s t r u c t i o n s
Wood Number
Pre-Flexed
1
3
5
7
9
0"
0"
2.0"
0"
2.0"
.5"
.5"
2.5"
.5"
2.5"
1.0"
1.0"
3.0"
1.0"
3.0"
1.5"
1.5"
3.5"
1.5"
3.5"
2.0"
2.0"
4.0"
2.0"
4.0"
All trimming instructions given
here are based on standard
length clubs (38” 5 iron, 45”
driver, 43” 3 wood).
Adjustments must be made as
necessary for longer or shorter
length clubs. If you have any
questions please don’t hesitate
to give us a call!
G r a p h i t e W o o d S h a f t Tr i m m i n g I n s t r u c t i o n s
Wood Number
Pre-Flexed
1
3
5
7
9
0"
0"
2.0"
0"
2.0"
.5"
.5"
2.5"
.5"
2.5"
1.0"
1.0"
3.0"
1.0"
3.0"
1.5"
1.5"
3.5"
1.5"
3.5"
2.0"
2.0"
4.0"
2.0"
4.0"
NOTE: Different brand name
shafts may have slightly different
tip trimming instructions. Please
contact the specific shaft
company for further detailed tip
trimming instructions.
Notes:
24
1-800-236-4566
-
Graman Graphite
Graphite Shafts
X- Fi r e C o m p 1 9 0
WOOD
IRON
Note: R/S shafts are black
Flex
Weight
(gms)
Torque
Length
Tip Par. (in)
Butt Dia.
Tip Diameter
A/L
79
5.3
46
4.00
0.590
0.335
R/S
82
5.3
46
4.00
0.600
0.335
A/L
80
4.9
40
5.00
0.590
0.370
R/S
84
4.9
40
5.00
0.600
0.370
GRXF190
The Crossfire Comp 190 is the ultimate entry level graphite shaft. The higher
torque offers amazing forgiveness with every shot! You can’t go wrong with a
shaft like this for any type of beginner or amateur player.
X- Fi r e C o m p 2 1 0
WOOD
IRON
Flex
Weight
(gms)
Torque
Length
Tip Par. (in)
Butt Dia.
Tip Diameter
R/S
82
4.7
46
4.00
0.600
0.335
A/L
79
4.7
46
4.00
0.590
0.335
R/S
84
4.2
40
5.00
0.600
0.370
A/L
80
4.2
40
5.00
0.590
0.370
GRXF210
Note: A/L shafts are champaign
The Crossfire Comp 210 is another great entry level shaft option. With less
torque than the Comp 190, this shaft offers longer distance. Many different
flex options make this shaft easy to customize to any golfer!
C r o s s Fi r e
IRON
WOOD
Flex
Weight
(gms)
Torque
Length
Tip Par. (in)
Butt Dia.
Tip Diameter
R/S
84
3.9
40
5.00
0.600
0.370
A/L
80
3.9
40
5.00
0.590
0.370
R/S
82
4.3
46
4.00
0.600
0.335
A/L
79
4.3
46
4.00
0.590
0.335
GRXF
The Crossfire shaft is designed for distance. It has lower torque than the
Comp 190 and Comp 210 for a much more stable feel. This shaft is an
inexpensive alternative to some of the more expensive shafts out there.
1-800-236-4566
-
25
Graman Graphite
C u s t o m Fi t t e d S e r i e s
Model
Type
Flex
Weight
(gms)
Torque
Length
Tip Par. (in)
Butt Dia.
Tip Diameter
CF300
WOOD
R/S, X/XX
95-98
3.4
46
4.00
.600-.610
0.335
CF300
IRON
R/S, X/XX
95-98
2.9
42
5.00
.600-.610
0.370
CF340
WOOD
L, A, R, S
62-68
5.0
46
4.00
.590-.600
0.335
CF340
IRON
L, A, R, S
62-68
4.5
40
5.00
.590-.600
0.370
CF390
WOOD
R/S, S/X
86-88
3.5
46
4.00
0.610
0.335
CF390
IRON
R/S, S/X
84-86
3.0
40
5.00
0.610
0.370
GRCF300
The Custom Fitted series is the most popular model. Intended for low handicap
amateurs and recreational golfers, this mainstream designed shaft gives optimum
performance in distance, accuracy and feel. The CF series offers the most forgiving
shafts, allowing favorable execution without hitting on the sweet-spot every time.
Guaranteed to be +/- 2 CPMs within each shaft.
C u s t o m Fi t t e d S e r i e s
Model
Type
Flex
Weight
(gms)
Torque
Length
Tip Par. (in)
Butt Dia.
Tip Diameter
CF310
WOOD
L/LL, A/L
70-72
4.5
46
4.00
0.590
0.335
CF310
IRON
L/LL, A/L
68-70
4.0
40
5.00
0.590
0.370
CF310
WOOD
A/R, R/S
74-76
4.5
46
4.00
0.600
0.335
CF310
IRON
A/R, R/S
72-74
4.0
40
5.00
0.600
0.370
CF310
WOOD
S/X, X/XX
82-84
4.5
46
4.00
.605-.610
0.335
CF310
IRON
S/X, X/XX
78-80
4.0
40
5.00
.605-.610
0.370
GRCF310
The 310 is the most popular shaft for golfers desiring solid feel at impact and total
club-head control. An affordable, lightweight, low torque shaft with high
performance characteristics providing accuracy and consistency for all skill levels. The
310 offers a wide range of appeal and enjoys a loyal following from high
handicappers to low handicappers. This shaft has a very forgiving design while
maintaining superior performance at a very competitive price.
C u s t o m Fi t t e d S p e c i a l t y S e r i e s
Model
Type
Flex
Weight
(gms)
Torque
Length
Tip Par. (in)
Butt Dia.
Tip Diameter
CF310 FT
WOOD
R/S, S/X
78-84
4.3
46
4.00
0.600
0.335
CF310 BT
WOOD
A/L, R/S, S/X
74-78
3.5-4.4
46
4.00
.590-.600
.350-.400
CF310 BT
IRON
R/S, S/X
74-76
3.1
40
5.00
0.600
0.400
CF310 PLUS
WOOD
A/L, R/S
73-77
4.5
48
5.50
.590-.600
0.335
CF310 PLUS
IRON
A/L, R/S
71-75
4.0
42
7.50
0.600
0.370
GRCF310BT
These Specialty series shafts are derived from the very successful 310 series line.
Designed for demanding players with unique requirements, these shafts are available
in: firm tip, big tip and long length versions. Guaranteed to be +/- 2 CPMs within
each shaft.
26
1-800-236-4566
-
Graman Graphite
Ultimate G Series
Model
Type
Flex
Weight
(gms)
Torque
Length
Tip Par. (in)
Butt Dia.
Tip Diameter
UL440
WOOD
A, R, S, X
55-61
3.3
48
4.00
0.600
0.335
UL540
WOOD
R, S, X
65-69
2.5
48
4.00
0.600
0.335
UL640
WOOD
A, R, S
51-55
3.0
48
4.00
0.600
0.335
UL680
WOOD
R, S, X
92-98
1.8
46
4.00
0.610
0.335
UL680
IRON
R, S, X
92-98
1.8
40
5.00
0.610
0.370
GRUL
By precisely matching swing balance and flex characteristics for each club, the Ultimate signature
series shafts are ideal for professional and low handicap amateurs looking for maximum stability
and consistency. Designed for discriminating golfers who want to achieve maximum club-head
speed for greater distance, accuracy and control, each shaft is created using advanced
technology combined with the finest raw materials and the highest strain graphite available in the
world. Constructed with ultra high modules, all of these shafts come with certified CPM numbers
on the butt allowing for logo alignment to produce a perfectly matched set. These UL series
shafts are manufactured with extremely precise symmetry, and then additional innovative steps
are taken to find the Optimum Flex Line™ for the series of shafts for easy custom fitting.
To u r Pr o f e s s i o n a l S e r i e s
Model
Type
Flex
Weight
(gms)
Torque
Length
Tip Par. (in)
Butt Dia.
Tip Diameter
TP440
WOOD
A, R, S, X
56-64
3.5
46
4.00
.590-.605
0.335
TP440
IRON
A, R
56-58
3.0
40
5.00
0.600
0.370
TP540
WOOD
R, S, X, XX
65-74
2.5
46
4.00
.600-.610
0.335
GRTP
For many years Graman's Tour Professional series shaft has proven itself over and over again for many
professionals and long drive pro's, including Jamie Chandler and Ben Witter. Designed for professionals
and low handicap amateurs, the TP series has three outstanding characteristics: distance, distance and
distance. This extraordinary feather-light shaft utilizes the finest materials available in the world to
provide maximum stability and consistency.
Competitive Series
Model
Type
Flex
Weight
(gms)
Torque
Length
Tip Par. (in)
Butt Dia.
Tip Diameter
CS230
WOOD
A/L
79
4.3
46
4.00
0.590
0.335
CS230
IRON
A/L
80
3.9
40
5.00
0.590
0.370
CS230
WOOD
R/S
82
4.3
46
4.00
0.600
0.335
CS230
IRON
R/S
84
3.9
40
5.00
0.600
0.370
GRCS230
The CS Series shafts are Graman's value-oriented shaft, designed for mid-handicap to recreational
golfers. Graman's proprietary technology coupled with cost-effective manufacturing techniques
come together to produce these shafts of superior quality, fantastic consistency and playability at
phenomenal prices.
1-800-236-4566
-
27
True Temper Steel
GS 75
Stk. Code
UG75IS
UG75IS
Irons
Flex
S
R
Tip Dia.
.370
.370
Butt Dia.
.600
.600
Length (in)
40.0
40.0
Flex Pt.
Low
Low
Wgt. (gms)
88
86
The GS75 is the lightest steel alloy golf shaft in the world. At less than 80 grams trimmed weight, the GS75 is over 15% lighter
than the lightest steel shafts made today. Building on the proprietary S3 super strength steel technology platform, the GS75
super lightweight steel iron shaft’s responsive tip section maximizes peak trajectory, distance, power, and feel.
For those players currently using graphite iron shafts or players seeking the advantages of ultra-lightweight steel, the GS75
provides improved responsiveness, durability, performance, and feel.
Black Gold
Irons
Code
Flex
Tip Dia.
Tapered Irons
BKGIX
X
.355
BKGIS
S
.355
BKGIR
R
.355
Parallel Irons
UBKGIX-41
X
.370
UBKGIS-41
S
.370
UBKGIR-41
R
.370
Tapered Irons - Frequency tuned sets (3-PW)
BKGIXSET (X-Flex)
X
.355
BKGISSET (S-Flex)
S
.355
BKGIRSET (R-Flex)
R
.355
Parallel Irons - Frequency tuned sets (3-PW)
UBKGIXSET (X-Flex)
X
.370
UBKGISSET (S-Flex)
S
.370
UBKGIRSET (R-Flex)
R
.370
Butt Dia.
Length (in)
Flex Pt.
Wgt. (gms)
.600
.600
.600
41.0-36.5
41.0-36.5
41.0-36.5
Mid
Mid
Mid
140-127
138-120
129-114
.600
.600
.600
41.0
41.0
41.0
Mid
Mid
Mid
138.0
133.0
128.0
.600
.600
.600
40.0-36.5
40.0-36.5
40.0-36.5
Mid
Mid
Mid
136-127
131-120
125-114
.600
.600
.600
40.0-36.5
40.0-36.5
40.0-36.5
Mid
Mid
Mid
136-127
131-120
125-114
Black Gold introduces Frequency Tuned™ technology. Incorporating True Temper's proprietary "Gold" manufacturing process,
each critical shaft parameter is held to unparalleled standards resulting in the first shaft ever to combine pinpoint frequency
specification with exacting weight tolerances and balance for unmatched repeatability and consistency.
An exclusive feature making Black Gold truly unique is the proprietary "gold nickel" plating process that gives the shaft its distinct
appearance. This proprietary plating process produces a distinctive gold shading effect over time for the ultimate expression of
individuality and personality.
Dynamic Gold SL
Irons
Woods
Available
Code
Tapered Irons
DGSLIX1
DGSLIS3
DGSLIR3
Parallel Irons
UDGSLIX1
UDGSLIS3
UDGSLIR3
Flex
Tip Dia.
Butt Dia.
Length (in)
Flex Pt.
Wgt. (gms)
X100
S300
R300
.355
.355
.355
.600
.600
.600
41.0-37.0
41.0-37.0
41.0-37.0
High
High
High
108
106
104
X100
S300
R300
.370
.370
.370
.605
.605
.600
41.0
41.0
41.0
High
High
High
109
109
104
.335
.335
.335
.600
.600
.600
46.0
46.0
46.0
High
High
High
108
106
105
.350
.350
.350
.600
.600
.600
46.0
46.0
46.0
High
High
High
108
106
105
Parallel Woods - .335 Tip
UDGSL33WX1
X100
UDGSL33WS3
S300
UDGSL33WR3
R300
UDGSL35WX1
X100
UDGSL35WS3
S300
UDGSL35WR3
R300
Look closely and you will see the same heritage, performance and consistency of the most celebrated shaft in the history of
professional golf....Dynamic Gold. However at 20% lighter, Dynamic Gold SL combines identical playability and feel of the
original with the performance advantages of a superlite design.
28
1-800-236-4566
-
True Temper
Dynalite Gold SL
Irons
Code
Tapered Irons
LGSLIX1
LGSLIS3
LGSLIR3
Parallel Irons
ULGSLIS3
ULGSLIR3
Flex
Tip Dia.
Butt Dia.
Length (in)
Flex Pt.
Wgt. (gms)
X100
S300
R300
.355
.355
.355
.600
.600
.600
42.0-37.0
42.0-37.0
42.0-37.0
Low
Low
Low
108
103
102
S300
R300
.370
.370
.600
.600
41.0
41.0
Low
Low
105
104
Available
True Temper is proud to build upon the incredible success of Dynamic Gold SL with the 2006 introduction of Dynalite Gold SL.
Dynalite Gold SL’s tip responsive design promotes a high ball flight to optimize trajectory for lower ball hitters. The shaft offers
the same incredible benefits of increased ball speed, added distance and less fatigue found only in the SL series of shafts by
True Temper.
T X- 9 0
Irons
Code
Flex
Parallel Irons
UTX90I3-41-HS
S
UTX90I2-41-HR
R
UTX90I1-41-HA
A
UTX9033W3-46-HS
S
UTX9033W2-46-HR
R
UTX9033W1-46-HA
A
Tip Dia.
Butt Dia.
Length (in)
Flex Pt.
Wgt. (gms)
.370
.370
.370
.600
.600
.600
41.0
41.0
41.0
Low
Low
Low
107
104
100
.335
.335
.335
.610
.610
.610
46.0
46.0
46.0
Low
Low
Low
109
105
102
TX-90 features a soft tip profile that promotes a higher ball flight for maximum carry. A unique speed-step design not only
gives the product its distinct appearance but also its remarkable playing attributes. TX-90 is the perfect choice for current
graphite iron shaft users searching for greater consistency as well as players seeking a lighter alternative to traditional steel
Dynamic Gold Lite
Irons
Woods
Code
Tapered Irons
DGLIX 100/200/300
DGLIS 200/300/400
DGLIR 200/300/400
Parallel Irons
UDGLIX 100/200/300
UDGLIS 200/300/400
UDGLIR 200/300/400
Parallel Woods
UDGLWX 100/200/300
UDGLWS 200/300/400
UDGLWR 200/300/400
Flex
Tip Dia.
Butt Dia.
Length (in)
Flex Pt.
Wgt. (gms)
X
S
R
.355
.355
.355
.610
.610
.610
41.0-37.0
41.0-37.0
41.0-37.0
Mid
Mid
Mid
110/113/118
106/109/112
106/109/112
X
S
R
.370
.370
.370
.610
.610
.610
41.0
41.0
41.0
Mid
Mid
Mid
110/113/117
106/109/112
106/109/112
X
S
R
.335
.335
.335
.610
.610
.610
46.0
46.0
46.0
Mid
Mid
Mid
116/120/123
110/113/117
107/110/113
Available
This shaft features the playing attributes of Dynamic Gold in an ultra lightweight design. Dynamic Gold Lite is the perfect choice
for golfers seeking mid trajectory in an ultra lightweight steel shaft. Dynamic Gold Lite woods are a great choice for today's
popular fairway woods. Available in tapered irons, parallel woods and parallel irons.
Dynamic
Irons
Code
UDIC
Flex
R/S
Tip Dia.
.370
Butt Dia.
.600
Length (in)
43.0
Flex Pt.
High
Wgt. (gms)
136
The Dynamic is the "grand-daddy" of them all. The only product in the golf industry that is still selling strong after almost 60 years.
Available for tapered irons, parallel woods and parallel irons.
1-800-236-4566
-
29
True Temper Steel
Dynamic Gold
Irons
Woods
Available
Code
Tapered Irons
DGIXL 100/200/300
DGISL 200/300/400
DGIRL 200/300/400
Parallel Irons
UDGIX 100/200/300
UDGIS 200/300/400
UDGIR 200/300/400
UDGWX 100/200/300
UDGWS 200/300/400
UDGWR 200/300/400
UDWXM 100
UDWSM 300
UDWRM 300
Flex
Tip Dia.
Butt Dia.
Length (in)
Flex Pt.
Wgt. (gms)
X
S
R
.355
.355
.355
.600
.600
.580
41.0-37.0
41.0-37.0
41.0-37.0
High
High
High
130/132/134
129/130/132
125/127/129
X
S
R
.370
.370
.370
.600
.600
.600
41.0
41.0
41.0
High
High
High
130/134/137
127/130/134
124/127/131
X
S
R
.335
.335
.335
.600
.600
.600
46.0
46.0
46.0
High
High
High
124/127/130
124/127/130
122/125/129
X
S
R
.350
.350
.350
.600
.600
.600
45.0
45.0
45.0
High
High
High
121
124
122
The #1 shaft in golf. This high-flex, tour weight shaft is designed for skilled players seeking a low, penetrating ball flight for
optimum control and accuracy. Dynamic Gold woods are now available with a .350" tip for clubs with oversize hosel
diameters. Available in tapered irons, parallel woods and parallel irons.
Dynalite Gold
Irons
Woods
Available
Code
Tapered Irons
LGIXL 100/200/300
LGISL 200/300/400
LGIRL 200/300/400
Parallel Irons
ULGIX 100/200/300
ULGIS 200/300/400
ULGIR 200/300/400
Parallel Woods
ULGWXH 100/200/300
ULGWSH 200/300/400
ULGWRH 200/300/400
Flex
Tip Dia.
Butt Dia.
Length (in)
Flex Pt.
Wgt. (gms)
X
S
R
.355
.355
.355
.600
.600
.600
42.0-37.0
42.0-37.0
42.0-37.0
Low
Low
Low
119/121/123
118/120/121
114/116/118
X
S
R
.370
.370
.370
.600
.600
.600
40.0
40.0
40.0
Low
Low
Low
117/121/124
114/118/121
114/118/121
X
S
R
.335
.335
.335
.600
.600
.600
45.0
45.0
45.0
Low
Low
Low
117/121/124
108/112/116
108/112/116
One of the most popular True Temper shafts of all time. The softer tip profile of Dynalite Gold produces a higher ball flight
preferred by mid to high handicappers and low ball hitters. The lightweight properties make it the perfect choice for anyone
looking for a balance between ultra lightweight and standard weight steel. Available in tapered and parallel irons as well as
.335” parallel woods.
Dynalite
Irons
Code
ULIC
ULIAL
Flex
R/S
A/L
Tip Dia.
.370
.370
Butt Dia.
.600
.580
Length (in)
42.0
41.0
Flex Pt.
Low
Low
Wgt. (gms)
122
112
Dynalite's lightweight, low-flex design has made it a favorite among golfers of all levels. Available in A/L and R/S combination
flexes for parallel woods and irons.
30
1-800-236-4566
-
True Temper
TT Lite XL
Irons
Woods
Code
Tapered Irons
2XLIS
2XLIR
Parallel Irons
UTTXLIC
U2LIAL
Parallel Woods
UTTXLWC
U2LWAL
Flex
Tip Dia.
Butt Dia.
Length (in)
Flex Pt.
Wgt. (gms)
S
R
.355
.355
.620
.620
40.0-36.0
40.0-36.0
Mid
Mid
118
113
R/S
A/L
.370
.370
.600
.580
43.0
40.0
Mid
Mid
128
110
R/S
A/L
.335
.335
.600
.580
48.0
46.0
Mid
Mid
126
110
The clubmaker's favorite! The mid-flex, longer length design of TT Lite XL is a great choice for any bore-through wood or iron,
and clubs can be built substantially longer than "standard length" without requiring a butt extension. Custom fitting has never
been easier. Available for tapered irons, parallel woods and parallel irons.
Tr u e Te m p e r
Irons
Code
TTS
TTS
Flex
R
S
Tip Dia.
.370
.370
Butt Dia.
.600
.600
Length (in)
41.0
41.0
Flex Pt.
High
High
Wgt. (gms)
127
127
The “True Temper” shaft is offered as an extremely inexpensive steel iron shaft. This is a great option for a beginner golfer or for
those corporate give away orders! It has a conventional 2 inch step pattern for a classic look.
S t e e l Pu t t e r S h a f t O p t i o n s
We offer a wide variety of straight and bent putter shafts. We have the ability to shaft or repair any putter on the market! Create
long pendulum putters, mid-length belly putters or traditional length putters with ease.
Putter Shafts
Stk. Code
Flex
Tip Dia.
Butt Dia.
Length (in)
Wgt. (gms)
Straight Shaft (Stepped)
n/a
.370
.600
41
130
Straight Shaft (Stepless)
n/a
.370
.590
36
120
Single Bend
n/a
.370
.590
36
120
Double Bend
n/a
.370
.590
36
120
Mallet Bend
n/a
.370
.590
36
116
Stepless Mid-Length
n/a
.370
.590
43
135
Stepless Long (Ski-Pole)
n/a
.370
.590
53
236
1-800-236-4566
-
31
Grafalloy
Prolaunch is the first golf shaft developed, designed and tested utilizing the latest in launch monitor technology in
order to help golfers achieve optimal launch conditions for added distance.
Pr o La u n c h B l u e 4 5
Woods
Prolaunch 45 is the lightest Blue shaft, ideal for
slower, controlled swing speeds.
Flex
.335 Tip
L
A
R
S
.350 Tip
L
A
R
S
Tip Dia.
Flex
.335 Tip
R
S
X
.350 Tip
R
S
X
Tip Dia.
Butt Dia. Length (in)
Torque
Flex Pt.
Wgt. (gms)
.335
.335
.335
.335
.595
.595
.595
.595
46.0
46.0
46.0
46.0
5.0
5.0
5.0
5.0
Low
Low
Low
Low
44
44
44
44
.350
.350
.350
.350
.600
.600
.600
.600
46.0
46.0
46.0
46.0
5.0
5.0
5.0
5.0
Low
Low
Low
Low
44
44
44
44
Woods
Prolaunch 55 is a superlight alternative for
stronger players wanting tour performance in a
lightweight design.
Torque
Flex Pt.
Wgt. (gms)
.335
.335
.335
.605
.605
.605
46.0
46.0
46.0
4.0
4.0
4.0
Low
Low
Low
57
57
57
.350
.350
.350
.600
.600
.600
46.0
46.0
46.0
4.0
4.0
4.0
Low
Low
Low
57
57
57
Woods
Prolaunch 65 is our most popular weight for a
wide range of players. It features a lower
torque design for added stability.
Flex
.335 Tip
R
S
X
.350 Tip
R
S
X
Tip Dia.
Torque
Flex Pt.
Wgt. (gms)
.335
.335
.335
.605
.605
.605
46.0
46.0
46.0
2.8
2.8
2.8
Low
Low
Low
64
64
64
.350
.350
.350
.600
.600
.600
46.0
46.0
46.0
2.8
2.8
2.8
Low
Low
Low
64
64
64
Woods
Prolaunch 75 is the perfect choice for strong
players with quick swing tempos, or for use in
your fairway woods.
32
1-800-236-4566
-
Flex
.335 Tip
R
S
X
.350 Tip
R
S
X
Tip Dia.
Torque
Flex Pt.
Wgt. (gms)
.335
.335
.335
.600
.600
.600
46.0
46.0
46.0
2.9
2.9
2.9
Low
Low
Low
76
76
76
.350
.350
.350
.600
.600
.600
46.0
46.0
46.0
2.9
2.9
2.9
Low
Low
Low
76
76
76
Grafalloy
Pr o La u n c h B l u e F W
j
ProLaunch technology designed specifically to
optimize ball flight in today's
j
high performance fairway woods.
j
44” design features optimal weight properties
to complement ProLaunch driver shaft
j
Available in A, R, S & X flexes
Woods
Flex
.335 Tip
A
R
S
X
Tip Dia.
.335
.335
.335
.335
.600
.600
.600
.600
44.0
44.0
44.0
44.0
Torque
Flex Pt.
Wgt. (gms)
2.8
2.8
2.8
2.8
Low
Low
Low
Low
80
81
82
84
Pr o La u n c h B l u e H Y
ProLaunch HY is Grafalloy’s first shaft designed
exclusively for today’s popular hybrid clubs. The
incorporation of Grafalloy’s patent-pending MicroMesh tip technology produces unmatched feel and
tip stability at impact while promoting optimum ball
flight and trajectory.
The new ProLaunch Iron incorporated Grafalloy’s
patent-pending Micro-Mesh tip technology making
it the most torsionally stable composite iron shaft
ever introduced. In addition to its low torque
properties, the shaft’s launch monitor tuned design
promotes higher launch angles for added carry and
improved distance on approach shots.
Developed for players seeking a flatter, penetrating
trajectory, ProLaunch Red combines the launch
monitor tuned performance of ProLaunch technology
with key performance attributes from the original
ProLite 35, the most popular ultralite shaft of all-time.
The shaft incorporates Grafalloy’s proprietary MicroMesh™ tip technology to strike the perfect balance
of tip stiffness, stability and spin control while
preserving critical feel for valuable feedback
Hybrid
Flex
Various
A
R
S
X
Tip Dia.
Various
Various
Various
Various
.600
.600
.600
.600
41.0
41.0
41.0
41.0
Torque
Flex Pt.
Wgt. (gms)
2.6
2.6
2.5
2.4
Low
Low
Low
Low
79
80
81
82
Pr o La u n c h B l u e I r o n s
Irons
Flex
.370 Tip
A
R
S
Tip Dia.
.370
.370
.370
.600
.600
.600
41.0
41.0
41.0
Torque
Flex Pt.
Wgt. (gms)
3.3
3.3
3.3
Low
Low
Low
76
76
76
Pr o La u n c h R e d
Woods
Flex
.335 Tip
R
S
X
.350 Tip
R
S
X
Tip Dia.
Torque
Flex Pt.
Wgt. (gms)
.335
.335
.335
.600
.600
.600
46.0
46.0
46.0
3.0
3.0
3.0
High
High
High
62
62
62
.350
.350
.350
.600
.600
.600
46.0
46.0
46.0
3.0
3.0
3.0
High
High
High
66
66
66
j
Low ball flight counterpart to the original ProLaunch
j
The ultimate combination of power and tour-caliber trajectory built upon the unequalled performance benefits of ProLite
35…the winningest graphite shaft of all-time.
j
Proprietary Micro-Mesh™ tip technology provides lower torque for greater stability while offering superior feel at impact
compared to other low trajectory, tip-stiff composite shaft designs
1-800-236-4566
-
33
Grafalloy
The New Prototype Comp NT combines
revolutionary carbon nanotubes into the resin
system of the shaft to dramatically improve the
strength properties. The improved strength and
consistency of carbon nanotubes combined
with micro-mesh™ tip technology results in a golf
shaft that delivers the longest, straightest, most
consistent drives of your life. Available in two
weights as well as in a hybrid shaft, there is a
Comp NT for every aspect of your game.
Pr o t o t y p e C o m p N T
Woods
Flex
.335 Tip
R
S
X
.350 Tip
R
S
X
Tip Dia.
Torque
Flex Pt.
Wgt. (gms)
.335
.335
.335
.600
.600
.600
46.0
46.0
46.0
3.1
3.1
3.1
Mid
Mid
Mid
64
64
64
.350
.350
.350
.600
.600
.600
46.0
46.0
46.0
2.7
2.7
2.7
Mid
Mid
Mid
85
85
85
Blue
Grafalloy Blue is the first ultra-light shaft
designed specifically for today’s oversized
drivers. Blue’s patent-pending Micro-Mesh Tip
technology delivers the perfect combination of
tip stability and energy transfer. The result is our
longest hitting shaft ever. Get blue, it’s great for
big heads.
Woods
Flex
.335 Tip
R
S
X
.350 Tip
R
S
X
Tip Dia.
Torque
Flex Pt.
Wgt. (gms)
.335
.335
.335
.600
.600
.600
46.0
46.0
46.0
2.8
2.8
2.8
Mid
Mid
Mid
63
63
63
.350
.350
.350
.600
.600
.600
46.0
46.0
46.0
2.8
2.8
2.8
Mid
Mid
Mid
63
63
63
Pr o L i t e 3 5
Prolite 35 features a low torque design ideal
for golf’s strongest players. The stiff-tip section
helps promote a lower, more boring ball flight
and makes it the perfect compliment for high
performance clubheads.
Woods
Flex
.335 Tip
R
S
X
.350 Tip
R
S
X
Tip Dia.
Torque
Flex Pt.
Wgt. (gms)
.335
.335
.335
.605
.605
.605
46.0
46.0
46.0
3.5
3.5
3.5
High
High
High
62
64
66
.350
.350
.350
.600
.600
.600
46.0
46.0
46.0
3.5
3.5
3.5
High
High
High
62
64
66
Pr o L i t e 4 5
The more moderate torque and lower weight
of the Prolite 45 makes it an ideal choice for
average to strong players. The lighter weight
design promotes increased clubhead speed
for added distance.
34
1-800-236-4566
Woods
-
Flex
.335 Tip
R
S
X
Tip Dia.
.335
.335
.335
.605
.605
.605
46.0
46.0
46.0
Torque
Flex Pt.
Wgt. (gms)
4.5
4.5
4.5
Mid
Mid
Mid
58
60
62
Grafalloy
Pr o C u s t o m
ProCustom provides clubmakers the flexibility to fit
almost any golfer through a unique combination flex
design. This lightweight iron and woods series features
a low flex design that provides higher ball flight for
longer drives and soft-landing approach shots.
Irons
Woods
Flex
.370 Tip
A/L
R/S
.335 Tip
A/L
R/S
Tip Dia.
Torque
Flex Pt.
Wgt. (gms)
.370
.370
.590
.590
43.0
43.0
4.1
3.9
Mid
Mid
74
77
.335
.335
.595
.600
48.0
48.0
5.0
5.0
Mid
Mid
68
70
Torque
Flex Pt.
Wgt. (gms)
Epic
Introducing Epic by Grafalloy. Increased distance with
a 35% improvement in shot dispersion compared to
graphite shafts on the market today.
Driver
A new material...an entirely new level of performance.
Epic is the first shaft to incorporate nanotechnology
into a design so advanced it's literally broken the mold.
In a time when most shafts are primarily improvements
upon existing designs, Epic featuring Nanofuse
technology is a revolution in materials, design, and
performance. Engineeres set out to utilize the full
design opportunities provided by nanotechnology to
create a shaft material combining the consistency and
accuracy of a steel shaft with the distance and feel
advantages of graphite. The result is Epic.
Fairway
Hybrid
Iron
Flex
.335 Tip
R
S
X
.350 Tip
R
S
X
.335 Tip
R
S
X
.350 Tip
R
S
X
.355 Tip
R
S
X
.370 Tip
R
S
X
Tip Dia.
.335
.335
.335
.600
.600
.600
46.0
46.0
46.0
3.5
3.5
3.5
Low
Low
Low
69
70
71
.350
.350
.350
.600
.600
.600
46.0
46.0
46.0
3.5
3.5
3.5
Low
Low
Low
71
72
73
.335
.335
.335
.600
.600
.600
44.0
44.0
44.0
2.5
2.5
2.5
Mid
Mid
Mid
84
87
87
.350
.350
.350
.600
.600
.600
44.0
44.0
44.0
2.5
2.5
2.5
Mid
Mid
Mid
86
89
89
.355
.355
.355
.595
.595
.600
43.0
43.0
43.0
2.5
2.5
2.2
Mid
Mid
Mid
85
85
91
Epic represents the first sporting goods product that
.370
.595
43.0
2.5
Mid
85
has been truly enabled by advances in
.370
.595
43.0
2.5
Mid
85
nanotechnology. Our proprietary Nanofuse material is
.370
.600
43.0
2.2
Mid
91
created by harnessing the superior strength properties
.335 Tip
Hybrid
R
.335
.600
43.0
2.5
Mid
82
of nano-crystalline metals and fusing them at the
Wood
S
.335
.600
43.0
2.5
Mid
85
molecular level with a composite polymer substrate.
X
.335
.600
43.0
2.5
Mid
85
The result is an entirely new high-performance shaft
.350 Tip
material that offers increased distance with a 35%
R
.370
.600
43.0
2.5
Mid
84
S
.370
.600
43.0
2.5
Mid
87
improvement in shot dispersion compared to graphite
X
.370
.600
43.0
2.5
Mid
87
shaft on the market today. Our proprietary Nanofuse
material is created by harnessing the superior strength properties of nano-crystalline metals and fusing them at the molecular level with a
composite polymer substrate. The result is an entirely new high-performance shaft material that offers increased distance with a 35%
improvement in shot dispersion compared to graphite shaft on the market today.
Nanofuse material dwarfs the strength of traditional shaft materials. Its strength properties even exceed "exotic" materials like titanium
found in most driver heads on the market today. This incredible strength enables the design of a superlightweight shaft that delivers
explosive distance shot after shot.
Through extensive robotic and player teset data, Epic has not only shown to deliver increased distance off the tee, but also a 35%
improvement in shot dispersion compared to graphite shafts on the market today. This combined improvement in distance and
accuracy puts you as much as 15-20 yards closer to the pin off the tee.
1-800-236-4566
-
35
Rifle
It is no coincidence that top-ranked TOUR players worldwide play Rifle shafts. A key element in our research and development
process is proving shaft design with the best players in the world. And the list of Rifle benefits is extensive: tighter shot
dispersion; better control; greater distance with improved accuracy; a smooth, yet solid feel at impact.
It's What's Inside That Counts
The amazing benefits of Rifle are possible through a patented internal and external Rifle design that transfers energy more
efficiently than any other shaft on the market. It's this energy transfer that gives Rifle its solid feel at impact with less shock and
vibration.
Frequency Matching for Consistent Performance
Rifle shaft sets are built through our exclusive process of Frequency Matching by electronic calibration to ensure identical shaft
flex from club to club. You never have to alter your swing rhythm or tempo to adjust to a too-stiff or too-soft club in your bag.
Pr o j e c t X F l i g h t e d
Flex
Tip Dia.
Butt Dia.
.355 Taper & .370 Parallel Available
X+ (7.0)
.355 & .370
0.600
X (6.5)
.355 & .370
0.600
S+ (6.0)
.355 & .370
0.600
S (5.5)
.355 & .370
0.600
R+ (5.0)
.355 & .370
0.600
Irons
Length (in)
Flex Pt.
Wgt. (g)
41.5-37.5
41.5-37.5
41.5-37.5
41.5-37.5
41.5-37.5
Variable
Variable
Variable
Variable
Variable
135
130
125
120
115
In addition to the playing characteristics that have made the Project X shaft a tour favorite, the all-new Project X Flighted features
an exaggerated change in kick point within each shaft throughout the set to optimize ball flight through the bag. Long irons
provide a lower kick point for higher ball flight, easier launch and greater distance, while the short irons have a higher kick point
for a lower trajectory, greater accuracy and control.
Pr o j e c t X H i - La u n c h
Flex
Tip Dia.
Butt Dia.
S+ (6.0)
.355 & .370
.600
R+ (5.0)
.355 & .370
.600
A (4.0)
.355 & .370
.600
Irons
Length (in)
Flex Pt.
Wgt. (g)
40.25-36.75
40.25-36.76
40.25-36.77
Low
Low
Low
119-115
113-109
105-101
The Project X High Launch iron shaft gives mid- to high handicap golfers the same high performance Rifle technology that Tour
players appreciate with the Project X. Features lighter weights and longer tip parallel sections, delivers a higher launch angle and
increases ball velocity and spin rate.
Pr o j e c t X
Flex
Tip Dia.
Butt Dia.
X+ (7.0)
.355 & .370
.600
X (6.5)
.355 & .370
.600
S+ (6.0)
.355 & .370
.600
S (5.5)
.355 & .370
.600
R+ (5.0)
.355 & .370
.600
Irons
Length (in)
Flex Pt.
Wgt. (g)
41.5-37.0
41.5-37.0
41.5-37.0
41.5-37.0
41.5-37.0
Low
Low
Low
Low
Low
130
125
120
115
115
A proven winner on the PGA Tour, this complex RIFLE features a different constant taper per inch for each shaft in the set.
Longer taper rate results in more energy transfer to the ball. The ball gets up faster and flattens out for a penetrating trajectory.
36
1-800-236-4566
-
Rifle
Rifle
Flex
Tip Dia.
Butt Dia.
X++ (7.5),X+ (7.0)
.355
.600
X (6.5),S+ (6.0)
.355
.600
S (5.5),R+ (5.0)
.355
.600
R (4.5),A (4.0)
.355
.600
A (3.5),L (3.0)
.355
.600
L (2.5),L (2.0)
.355
.600
Irons
Woods
.335 Tip
X++ (7.5),X+ (7.0)
X (6.5),S+ (6.0)
S (5.5),R+ (5.0)
R (4.5),A (4.0)
A (3.5),L (3.0)
L (2.5),L (2.0)
.335
.335
.335
.335
.335
.335
.600
.600
.600
.600
.600
.600
Length (in)
Flex Pt.
Wgt. (g)
Variable
Variable
Variable
Variable
Variable
Variable
Variable
Variable
Variable
Variable
Variable
Variable
133-105
133-105
133-105
133-105
133-105
133-105
Variable
Variable
Variable
Variable
Variable
Variable
Variable
Variable
Variable
Variable
Variable
Variable
130-105
130-105
130-105
130-105
130-105
130-105
Widely used by top Tour players throughout the world, Rifle steel shafts feature patented stepless design and are Frequency
Matched. This consistent Tour winner is an excellent choice for all players.
Spinner Wedge
Wedges
Flex
Tip Dia.
Butt Dia.
X (6.5)
.355
.600
S+ (6.0),S (5.5)
.355
.600
R+ (5.0),R (4.5)
.355
.600
Length (in)
Flex Pt.
Wgt. (g)
Variable
Variable
Variable
Mid
Mid
Mid
130-115
130-115
130-115
Originally made for PGA Tour players who like a softer feel in their scoring irons, the Rifle Spinner is a scoring wedge shaft
designed for sand, lob and gap wedges.
Rifle Hybrid
Flex
Tip Dia.
Butt Dia.
X+ (7.0)
.355
.600
X (6.5),S+ (6.0)
.355
.600
S (5.5),R+ (5.0)
.355
.600
Irons
Length (in)
Flex Pt.
Wgt. (g)
43.5
43.5
43.5
Mid
Mid
Mid
127-111
127-111
127-111
The Rifle Hybrid features soft tip properties of a fairway wood shaft which helps get the ball airborne, while at the same time
having the length and torsion control of a long iron which helps keep the club on plane and gives a player better control.
Rifle Flighted
Flex
Tip Dia.
Butt Dia.
X+ (7.0),X (6.5)
.355 & .370
.600
S+ (6.0),S (5.5)
.355 & .370
.600
R+ (5.0),R (4.5)
.355 & .370
.600
Irons
Length (in)
Flex Pt.
Wgt. (g)
Variable
Variable
Variable
Variable
Variable
Variable
135-115
135-115
135-115
A revolutionary concept developed through exclusive Flex Distribution Technology™ and perfected on the PGA and European
Tours. Rifle Flighted iron shafts provide an exaggerated change in kick point within the club set to manipulate ball flight.
1-800-236-4566
-
37
Building Supplies
Glue Gun
G r i p Ta p e
j
Glue dispensing gun is
perfect for a frequent club
builder
j
Good for long set and
quick set epoxy
j
Double sided tape 2”
wide by 36 yards, or 3/4”
wide by 36 yards
Extensions
Epoxy
j
Extends club up to 3.5
j
Available in Long and Quick setting
in. Available for steel
and graphite
form
j
Fits perfectly into our Glue Gun or
use supplied manual plunger
Brampton
j
Hardman Two-part quick
set epoxy
j
Good for one or two clubs
j
Come with or without nozzle
j
Non-toxic, odorless
j
Re-usable bottle
j
Available in 4 oz., 8 oz, 16 oz., 32 oz., and gallon
j
Pro-Fix 4 oz Quick Set
Epoxy
j
Good for one or two sets
sizes
Swing Radar
Shafting Beads
j
Measures swing speed and tempo
j
This is a great, simple, and fast way
j
Center loose shafts in the
to fit golf clubs
38
1-800-236-4566
-
.3
.2 75/
5 ” .5
Ta 35
ll
.3
.5 75/
” T .5
all 50
.3
.5 7 5 /
” T .5
all 50
.3
.5 75/
” T .5
all 50
.3
.7 75/
5” .5
Ta 25
ll
.3
S h 35
af to
t A .3
da 50
pt
er
.3
7
1” 5 /
Ta .53
ll
5
.3
.2 3 5 /
5” .4
Ta 80
ll
.3
.5 35/
” T .5
all 50
.3
.5 35/
” T .5
all 50
.3
.7 35/
5” .4
Ta 70
ll
.3
.7 35/
5” .4
Ta 70
ll
alternative for readings this
accurate!
j
Swing Radar comes with its own
transfer pouch
.3
.5 75/
” T .5
all 50
hosel with ease!
j
Tough glass beads stand up
to the elements
j
There is no less expensive
Raven Grip Series
Available In:
R a v e n Pe r f o r a t e d Wr a p
Standard
Jumbo
Ladies
Putter
R a v e n Ru f f Wr a p
Available In:
Standard
R a v e n To u r S e l e c t W h i t e
Available In:
Standard
Jumbo
Putter
R a v e n To u r S e l e c t B l a c k
Available In:
Standard
Raven D2X Black and Blue
Available In:
Standard
Jumbo
Half Cord Standard
Available In:
Raven D2X Black and Red
Standard
Jumbo
Half Cord Standard
Raven Image Series (Clear Grip)
Available In:
Standard-round
Smooth Putter
Perforated Putter
Underlistings made to order - 12 pc minimum
1-800-236-4566
-
39
Winn Grips
The Winn Grip line of golf grips have an amazingly soft feel. They are made of a composite of materials not seen in any other brand of
grips. With a lighter weight they help to offer better club head feel while the soft foam core dampens vibrations.
G7 Black XF
Excelsior RF Mocha
Available in:
Standard
(GWLDM) Available in:
Undersize
(Winn# - 3715W-MO)
(Winn# - 5G7X)
50 Grams
39 Grams
G8 Black XF
Classic RF Black
(Winn# - 5715C)
(Winn# - 6XWC) Firm
(Winn# - 7751C)
Available in:
Standard
(GWBM) Available in:
Standard
Mid-size
42 Grams
43 Grams
47 Grams
U S A Pi s t o l
V 1 7 -A V S N a v y R F
(Winn# - 5VSA-NY)
(GWAVSN)
50 Grams
(Winn# - 5G8X)
(GWPUSA)
(Winn# - M8W-USA)
Available in:
Standard
50 Grams
B l a c k / R e d Pi s t o l
V 1 7 -A V S D a r k G r a y X F (GWAVSG)
60 Grams
M e d a l l i s t V 1 7 A V S Pi s t o l
(Winn# - M8VSC-DGY)
V 1 7 - RT N a v y / B l a c k X F (GWRTN)
Available in:
Standard
(Winn# - 5VRAX-NYB)
Tw o -To n e ( M / B ) Pi s t o l
(GWPAVS)
72 Grams
(GWPMG)
50 Grams
(Winn# - HTG-Y2K)
V 1 7 - RT D a r k G r a y X F
(GWRTG)
Available in:
Standard
B l a c k O v e r s i z e Pu t t e r
58 Grams
(GWPOS)
50 Grams
(Winn# - 7815W)
1-800-236-4566
-
90 Grams
PUTTER GRIPS
50 Grams
(Winn# - 5VRAX-DYG)
40
(GWPRB)
(Winn# - T58W-BR)
Available in:
Standard
(Winn# - 5VRAX-DYG)
60 Grams
Star Grip Series & Avon
Star Grips
Star Grips, founded in 1990, is the only remaining American rubber grip company that manufactures 100% in
the USA. No one comes close to the weight consistency of +/- .5 grams and concentricity to .005 of an
inch. Star Grips are formulated and blended with an industrial grade EPDM for maximum lack, supple feel and
unmatched wet play. These grips are extremely durable. They stay tacky and supple indefinitely.
M e n ’ s Pe r f o r a t e d Wr a p
Avon Grips
M i d - s i z e Pe r f o r a t e d Wr a p
J u n i o r Pe r f o r a t e d Wr a p
Smoothee
Men’s Standard & Oversize
La d i e s B l u e
La d i e s Pe r f o r a t e d Wr a p
La d i e s G r a y
The Original Chamois design with its innovative AirCushioned Absorption System (ACAS) continues to
set the grip standard in comfort and control for
over two decades. Because of it's soft supple feel it
is preferred by golfers in need of arthritic relief.
S i d e Wi n d e r
To u r S e r i e s
S t a r Pu t t e r
1-800-236-4566
-
41
The New Tour Spec
We have developed an entirely new Tour Spec Series. A newly improved weighting system offers more versatility and
customization. We’ve made adjustments to our TM-4300 series to create a nearly flawless driver. The fairway woods
have been improved upon and a new hybrid option is now offered. We have raised the bar for quality and
performance. The name brands can’t even compete on this new level.
Moment of Inertia (MOI) fitting is the wave of the future!
Custom fitting has been brought to a whole new level!
With the new Tour Spec Series we can
now offer complete Moment of Inertia
(MOI) fitting. Moment of inertia fitting
is the latest and greatest when it
comes to custom clubs. With a few
simple calculations based on your swing
we can determine the proper MOI for
your club. This will create the longest
and straightest shots you have ever
experienced. MOI fitting along with an
extremely solid SP-700 Titanium and super high tolerance graphite shafts
we can offer a driver with quality beyond any name brand product.
Each driver includes five weights installed in the club head. These will be
inserted to each customers individual specifications based on club
length, shaft flex, grip choice, and the MOI. A weight kit is also available
for those of you who would like to experiment with their own custom
weight. The kit includes eight new weights and a wrench for easy use.
Tour Spec
Weight Guide
The TM-4600 is as large as you can get at 460 CC.
It offers a COR that is pushing the legal limit to
the max. An extremely deep face gives a
great look from address and increases the
size of the sweet spot larger than we
have ever seen!
Colored dots correspond to painted
holes on the screw face. Weights are also stamped
into the bottom of the screw.
.5 Gram (qty 1)
TM-4600
1.5 Gram (qty 1)
1
1
1
1
1
1
Loft (deg) RH
9.5
10.0
10.5
11.0
11.5
12.0
Lie (deg)
58
58
58
58
58
58
Face Angle
0
0
0
0
0
0
Volume (CC)
460
460
460
460
460
460
Weight (No Screws)
189
189
189
189
189
189
2 Gram (qty 2)
4 Gram (qty 2)
6 Gram (qty 1)
8 Gram (qty 1)
This new series will only be available assembled by Raven or a Raven Custom Fitter. This way we can ensure that all clubs from
this new series are perfectly built to the customer specifications.
42
1-800-236-4566
-
The New Tour Spec
TM-4600-F
3
4
5
LOFT (RH)
15
18
21
LIE
58
58.5
59
WGT (gms)
200
203
210
Face Ang (deg)
+1
+1
+1
Hosel Bore
.335
.335
.335
This new series also offers an entirely redesigned fairway
wood. This new option contains two weight ports that are
compatible with the driver and hybrid weights. Solid heat
treated and tempered stainless steel make this one of our
highest quality fairway wood options. The polished sole
and deep black finish add a very luxurious touch. A square
to open face make this a definite players club.
j
New heat treated and tempered stainless steel
j
Re-designed weighting in the sole helps with MOI fitting
j
Matches perfectly to the TM-4600, TM-4200, or last years
TM-4300
Made from virgin 15-5 stainless steel that is 10% lighter than most materials used. Both are plasma welded for
added toughness. This means... More distance!
TM-4600-H
2
3
4
19
22
25
Lie
59.5
60
60.5
Weight (gms)
221
228
235
0
0
0
.370
.370
.370
Loft (RH)
Face Ang (deg)
Hosel Bore
Our newest hybrid also contains the latest and greatest in
removable weight technology. Compatible weights with the
driver and fairway woods make them easy and convenient to
set up. The TM-4600-H was designed to replace your
standard 2, 3 or 4 irons directly. No more struggling with your
lower irons. These hybrids are the wave of the future.
j
New heat treated and tempered stainless steel
j
Re-designed weighting in the sole helps with MOI fitting
j
Matches perfectly to the TM-4600, TM-4200, or last years
TM-4300
1-800-236-4566
-
43
The New Tour Spec
Coming Spring of 2007
The following clubs are in prototype production. We are expecting them to be complete by the end of March. We’d like to
clue you in on the type of work that goes into developing our new products. From prototype to production we constantly
monitor the progress. Below you will find the beginning of our new Tour Spec TS-401 iron. The images have been completely
computer generated and manipulated until they are just how we imagine them. This particular set will have a progressive muscle
to create a solid, forgiving feel and easy playability...
After we create a design we have to specify exactly how we want these clubs to play. Since we would like this cavity back to
be proportional to our Blades we based the blade length off of them. By doing this we allow them to possibly be mixed and
matched as a combo set. A slight progressive offset aides in forgiveness and a progressively larger sole from PW to 3 iron help
us keep the COG low. This, among many other procedures, is how we go about designing Raven’s newest clubs!
17.75 mm
Sole Width
17.75 mm
Sole Width
17.5 mm
Sole Width
17.5 mm
Sole Width
6
7
3
4
5
Head Weight:
243 g
Offset: 3.5 mm
17.75 mm
Sole Width
8
78 mm
17.75 mm
Sole Width
9
18 mm
Sole Width
PW
19 mm
Sole Width
77.5 mm
Head Weight:
250 g
Offset: 3 mm
77.5 mm
Head Weight:
258 g
Offset: 2.5 mm
77 mm
Head Weight:
265 g
Offset: 2.0 mm
77 mm
Head Weight:
273 g
Offset: 1.5 mm
76 mm
76 mm
Head Weight:
Head Weight:
287
280 g
Offset: 1.0 mm Offset: .5 mm
76 mm
Head Weight:
294
Offset: 0 mm
TS-501
The New TM-30
You asked for it. Now it’s back! The new
TM-30 will be updated with a new black
polymer smooth milled face. This has
been our most requested putter since it
left our line a few years ago. Expect to
see if back in March!
Another new Tour Spec iron is on it’s
way. This one is the TS-501. It is another
deep cavity back forged club. We
beleive this may quickly become one of
our most popular irons to date!
Expected arrival date - Late March.
44
1-800-236-4566
-
Printing, Awards and Apparel
Stickers & Hole Signs
Custom stickers are available with any logo in any shape. Create your own or have us
design it for you - it’s easy! Customized
stickers are a great way to show your
support for your local high school teams,
promote your small business, or for any
other purpose you can imagine.
M
T
O
R
S
P
O
R
T
S
t
or
pp
Su
We print on a durable high gloss or matte
vinyl with a 3 year outdoor guarantee! The
UV resistant ink stands up well to harsh
conditions.
O
er
of
th
eN
ew
HOLE SPONSOR SIGNS
Am
er
Heat
n Bass An
ica
ers
gl
18”x 24” hole sponsor signs are available!
Choose from some of our stock designs, or
create your very own! Single or double
sided signs are offered. They include a wire
frame for installation.
NEW BERLIN
Berlin
SM
il
T
ou
ra
rna
ment T
Plaques
Plaques are a great way to commemorate a
special event. We specialize in high school
sporting events and team plaques.
NEW for 2007 are our full color customized
plaques. Add team photos, school logos, or
any pictures you’d like. This is an extremely
popular alternative to the typical engraved
plaques that have been around for years. Let
your awards stand above the rest with full color!
Laser engraved “flexibrass” is used for most of
our offerings. It is an affordable alternative to
solid brass plating (which is also available). Crisp
text and great coloring options give all our
plaques a very luxurious appearance.
Cherry wood and black marble plaques are
offered in a variety of sizes. Please contact our
sales team for more information about our
plaque offerings.
Add a full color decal plate to your plaque
for even more customization!
EHS
L
WOODLAND CONFERENCE
NORTH DIVISION CHAMPION
WIA A DIVISION III QUALIFIER
I
O
Andrew Araco # 60
N
S
10
20
30
40
50
40
30
20
10
BIC
O N H
D T A
R
Y E
L A
L C
E T
C E
T R
1-800-236-4566
-
45
H e a t Pr e s s i n g , S i l k S c r e e n i n g , E m b r o i d e r y
E HERE
M
A
N
R
U
YO
Heat pressing is a simple and inexpensive way to
customize a shirt or jersey. Add last names and
numbers to jerseys or create a custom graphic for a
small amount of shirts. Heat press material is
available in many different colors from black to hot
pink. No need for silk screen setup for low quantity
orders!
07
Silk Screening is available for up to 4 colors. This is
a great, long lasting option for T-shirts, hoodies or
jackets in larger quantities or for multi-color
graphics.
EISEN
BAS HOW
KET
BAL E
L
Embroidery is an awesome way to customize your
apparel. Add logos to shirt chests, jackets, hats
and other items in as many colors as you’d like.
We offer hundreds of styles of shirts, jackets,
jerseys, shorts, pants, and hats to fit into any lifestyle
R
Tr o p h i e s
Stand up trophy awards are a big hit with the kids.
With a huge array of options for any sport or event
we are able to customize each trophy to your
individual needs. Each trophy is affixed with laser
engraved “flexibrass” with the information you want.
From small acrylics to large stand up’s - we have it all!
HOLE IN ONE AWARDS
We have a great award to commemorate your hole
in one. We’ll add the course name, hole number,
yardage, club used, date, and your name to each
award. It even holds the golf ball you used!
ACRYLIC
Your Info
46
Acrylic awards are becoming more and more
popular. With many different styles, sizes and colors
to choose from it is very easy to find something to fit
your needs. Acrylic offers a very luxurious and
professional style, great for businesses and offices!
Here
1-800-236-4566
-
Banners
Michael Drake
“Welcome
To My Island”
We now offer complete wide format
printing of custom banners. We are capable
of creating you a custom banner for any
event, party, or business! Let us design it for
you or send us your artwork and we will
take care of the rest. We use a durable vinyl
material that is weather and UV resistant for
up to 3 years outdoors. All banners
include grommets in the corners for hanging
and mounting purposes.
& the
‘No Tan Lines Band’
www.drakemusic.com 414-769-2001
There is no easier and less expensive way to
get the word out than with a full color
custom banner!
All banners are priced by the foot. Our maximum dimensions are 30” wide by 12” feet long. Art setup charges do apply
or
We print digital banners!
st
From wedding
o
ts
e design it all!
-W
sp
Po s t e r s & Pa i n t i n g s
Grand Opening
E-Z Ceramics Too
Repairs
Regrips
Sales
WELCOME
HOME
We also specialize in printing custom posters! From individual awards to full team
schedules, we do it all. This is a great way to personalize a gift for anyone you
know. We will scan and edit your photos into any style and color background.
Add any text you’d like in any font you can imagine. Or create your own poster
and we will print them for you! This is an inexpensive way to show your
individualism and your creativity.
We print posters in a variety of sizes. Standard size posters include 11”x 17”,
16”x 20”, 18”x 24”, and 24”x 36”. Custom sizes are available as well.
High quality, high gloss finished poster paper stands up nicely to the test of time
with a long lasting UV resistant coating and thick texture.
With our new high-tech painting program we are able to turn your
photos into paintings, print them on actual painters canvas and mount
them on wooden frames. These prints last a lifetime and add a unique
touch to your special photos! Many custom sizes are available to
cater to any style photograph.
1-800-236-4566
-
47
Wisconsin:
Raven Golf Headquarters
2865 S. Moorland Rd.
New Berlin, WI 53151
1-800-236-4566
2007 PRODUCT CATALOG
Central Florida:
621 67th Street Circle East
Suite 101
Bradenton, FL 34208
Phone: 941-746-0066
Australia - New Zealand:
Golf National Pty. Ltd.
1126 Argon St.
Summerpark, OLD
Australia, 4074
Phone: 61 07 3279 7684
$1.00 USD
P.O. Box 510335
New Berlin, WI 53151-0335
Canada
Kona Golf Sales
3620-B Laird Road, Unit 2
Mississauga, ON, L5L 6A9
Phone: 905 608 2068
Fax: 905 608 2070
Europe
GolfLab
Snaroyveien 69
1367 Snaroya, Norway
Phone +4767110080
Fax: +4764002930
Raven also has distributors in:
Germany
Switzerland
New Zealand
Belgium
United Kingdom
Spain
Canada
Sweden
Netherlands
JGL
Custom Golf Equipment
1-800-236-4566

Full Catalog - Raven Golf Clubs

Transcription

Similar documents

Differential Air Shaft

cpr for the dead of night.

Light Options – There are 3 dual LED strips in the

TC-143 Service Manual - Fabco Automotive Corporation

SHAFTS

Top Tip - My Condition, My Terms, My Life

Torre de Collserola

Page

LONGFIELD™ 30 SPLINE Super Set

Clubmaker`s Belt Sander