Reconditioning flyer

_Walter Reconditioning Service
Reconditioning to original
manufacturer quality.
Reconditioning
WALTER RECONDITIONING SERVICE:
MANUFACTURER QUALITY PAYS OFF.
The Reconditioning Service for Walter Titex and Walter Prototyp tools makes a significant contribution to
reducing your production costs – by allowing you to obtain tools that are as good as new at an attractive
price-performance ratio.
Reconditioning cycle:
1
The used tools are packed into
the reconditioning box provided
by Walter free of charge.
The transport box is collected.
2
The original tool
­geometry and coating
are ­reconditioned to
the quality requirements
of the new tool.
3
The tools reconditioned
to original manufacturer
quality are delivered.
50% LOWER COSTS
The service provided by Walter Multiply –
­reconditioning tools to manufacturer quality – ­
pays off in more ways than just tool costs:
Benefits for you:
–– Original, manufacturer-quality geometry
and coating
–– Reconditioning centers around the world
for stable production processes
–– Additional services such as measurement
protocols, etc. are available
Tool costs
100%
-50%
75%
50%
25%
0%
New
1x
2x
3x
Number of reconditioning cycles
Cutting edge geometries are
­complex, so Walter uses its wealth
of engineering expertise to return
them to their original condition.
The coating is crucial for tool
­performance. Walter is the only
­reconditioning service provider
that coats your tool using the
original procedure.
µ
The same tolerances and quality
features apply to tool reconditioning
as to the production of brand new
tools. These standards are maintained
using state-of-the-art measuring
machines.
OUR INDICATION OF QUALITY
Look out for the “Original Walter Quality” label. It shows you
which tools are recommended for reconditioning in your order
documentation – and also certifies them afterwards.
100% MANUFACTURER QUALITY
For some time now, achieving optimum performance
with solid carbide tools has involved more than
just grinding and coating. Special production
processes for machining cutting edges mean that
additional facilities are required in reconditioning
centers. The same applies to the pre- and posttreatment procedures in the coating process. In
addition, maximum performance is only achieved in
complex geometries by those who meet the highest
requirements for production tolerances.
Available for:
–– Solid carbide drills and milling cutters
–– Special solid carbide drills and milling cutters
–– High-performance solid carbide reaming tools
–– Solid carbide thread mills
For more detailed information about this service in
your area please contact your field service employee.
Walter USA, LLC
N22W23855 RidgeView Parkway West
Waukesha, WI 53188, USA
Phone: 800-945-5554 Fax: 262-347-2500
[email protected]
www.walter-tools.com/us
www.facebook.com/waltertools
www.youtube.com/waltertools
Walter Canada
[email protected]
Walter Tools S.A. de C.V.
Carr. Estatal KM 2.22 #431, Módulo 3, Interior 19 y 20
El Colorado Galindo, Municipio El Marqués,
Querétaro, C.P. 76246, México
Phone: +52 (442) 478-3500
[email protected]
0849820292
Printed in the USA 849820-292, EDP-# 7083024 (2/2016)